def main(args):
np.random.seed(0x1337)
spi = spidev.SpiDev()
spi.open(args.bus, args.device)
spi.max_speed_hz = args.speed
spi.bits_per_word = 16
dt = np.dtype(np.uint16)
dt = dt.newbyteorder('>')
if args.send:
data = np.array(
[48713, 25935, 32857, 42796, 38931, 10992, 61444], dtype=np.uint16
) #np.random.randint(0, 0xffff, size=7, dtype=dt) #np.arange(1, 8, dtype=dt)
print(data)
crc = 0xffff if args.crcerr else crc16.crc16xmodem(data.tobytes())
data = np.append(data, crc)
data = data.astype(dt).tobytes()
spi.writebytes(data)
print(f"written {len(data)} bytes ({crc})")
else:
raw = bytes(spi.readbytes(16))
msg = np.frombuffer(raw, dtype=dt)
crc = crc16.crc16xmodem(raw[:-2])
print(crc)
if crc == msg[-1]:
print(f"received {msg[:-1]} ({len(raw)} bytes) [OK]")
else:
print(f"crc error: {crc} != {msg[-1]} [FAIL]")
spi.close()
def encodePacket(linenr, cmd, payload):
assert (linenr > 0)
assert (cmd > 0)
result = nullByte
header = struct.pack("<BBB", linenr, cmd, len(payload) + 0x01)
result += header
checksum = crc16.crc16xmodem(header)
result += payload
checksum = crc16.crc16xmodem(payload, checksum)
# print "cflags, c1: 0x%x, 0x%x" % (cflags, checksum)
cflags = 0x1
if checksum == 0:
cflags = 0x4
checksum = 0x0101
elif (checksum & 0xFF00) == 0:
cflags = 0x2
checksum = 0x0100 | (checksum & 0xFf)
elif (checksum & 0x00FF) == 0:
cflags = 0x3
checksum = 0x0001 | (checksum & 0xFF00)
# print "c1 adjusted: 0x%x" % checksum
result += struct.pack("<BH", cflags, checksum)
return result
def callbackmotor1(data):
vel_1 = motormath(data.data)
if vel_1 < 0:
vel_1_hex = hex((abs(vel_1) ^ 0xffffffff) +1)[2:].strip( 'L' )
else:
vel_1_hex = hex(vel_1)[2:].zfill(8)
vel_1_hex_int = int(vel_1_hex,16)
# Converts the velocity hex value into the little endien format and puts it into the
# proper hex format and gets the CRC value
vel_1_final = struct.pack('<q', vel_1_hex_int).encode('hex')[:8]
chk_sum_data = hex(crc16.crc16xmodem(binascii.a2b_hex(vel_1_final))).strip('0x').zfill(4)
# Generates the word number value and calculates the CRC
#cmd_word_count = "{0:0>2}".format(hex(int(math.floor(len(vel_1_final.rstrip('0'))/2))).strip( '0x' ))
cmd_word_count = struct.pack('h', int(math.floor(len(vel_1_final.rstrip('0'))/2))).encode('hex')[:2]
chk_sum_cmd = hex(crc16.crc16xmodem(vel_mode + binascii.a2b_hex(cmd_word_count))).strip('0x')
motor_command_1 = binascii.b2a_hex(vel_mode) + chk_sum_cmd + vel_1_final + chk_sum_data
print "Motor 1 Command:"
print motor_command_1
def parse_tcp(packet_len, ip_packet, ts):
source = socket.inet_ntoa(ip_packet['src']) #server
dest = socket.inet_ntoa(ip_packet['dst']) #client
global TIMEOUT
global TABLE_SIZE
key = dest + source
if key in netassayTable:
d = netassayTable[key]
knownlistDict[d][1] = knownlistDict[d][1] + 1
knownlistDict[d][2] = knownlistDict[d][2] + packet_len
serverIP32 = np.uint32(
int.from_bytes(socket.inet_aton(source), byteorder='big'))
clientIP32 = np.uint32(
int.from_bytes(socket.inet_aton(dest), byteorder='big'))
salt1 = np.uint32(134140211)
salt2 = np.uint32(187182238)
hash1 = crc16.crc16xmodem(
np.uint32(serverIP32 + clientIP32 + salt1)) % TABLE_SIZE
hash2 = crc16.crc16xmodem(
np.uint32(serverIP32 + clientIP32 + salt2)) % TABLE_SIZE
if hash1 in usedHash1 and usedHash1[hash1][1] == key:
usedHash1[hash1][0] = ts
elif hash2 in usedHash2 and usedHash2[hash2][1] == key:
usedHash2[hash2][0] = ts
else:
print("error in hash storage")
exit(-1)
def calc_crc(data):
assert len(data) >= 16
crc = crc16xmodem(data[:4])
crc = crc16xmodem(b"\0\0", crc)
crc = crc16xmodem(data[6:], crc)
return crc
def __init__(self, numeroTramas, numeroTrama, BitsPorTrama, longitudCU,
cargaUtil):
self.numeroTramas = self.aBinario(numeroTramas, 8)
self.numeroTrama = self.aBinario(numeroTrama, 8)
self.cargaUtil = cargaUtil
self.longitudCU = self.aBinario(cargaUtil.size, longitudCU)
self.bitsRelleno = BitsPorTrama - cargaUtil.size
self.CRC = self.aBinario(crc16.crc16xmodem(self.cargaUtil), 16)
f = open('tramas.txt', 'a')
f.write(
'\n\n*****************************************************************\n'
)
f.write('Tramas: ' + str(numeroTramas) + str(self.numeroTramas) +
'Longitud:' + str(self.numeroTramas.size) + '\n')
f.write('Numero de trama: ' + str(numeroTrama) +
str(self.numeroTrama) + 'Longitud:' +
str(self.numeroTrama.size) + '\n')
f.write('Longitud carga util: ' + str(self.longitudCU.size) +
str(self.longitudCU) + '\n')
f.write('Carga util: ' + str(self.cargaUtil.size) +
str(type(self.cargaUtil)) + str(type(self.cargaUtil[2])) +
'\n')
f.write(str(self.cargaUtil) + '\n')
f.write('Relleno: ' + str(self.bitsRelleno) + '\n')
f.write('CRC: ' + str(crc16.crc16xmodem(self.cargaUtil)) +
str(self.CRC) + str(type(self.CRC)) + str(self.CRC.dtype) +
'\n\n')
f.close()
def key_hash(self):
crc = 0
for key in self.keys:
crc = crc16.crc16xmodem(key, crc)
crc = crc16.crc16xmodem(chr(0), crc)
self.dbg("key hash %04X" % crc)
return "%04X" % crc
def encodePacket(linenr, cmd, payload):
assert(linenr > 0)
assert(cmd > 0)
result = nullByte
header = struct.pack("<BBB", linenr, cmd, len(payload)+0x01)
result += header
checksum = crc16.crc16xmodem(header)
result += payload
checksum = crc16.crc16xmodem(payload, checksum)
# print "cflags, c1: 0x%x, 0x%x" % (cflags, checksum)
cflags = 0x1
if checksum == 0:
cflags = 0x4
checksum = 0x0101
elif (checksum & 0xFF00) == 0:
cflags = 0x2
checksum = 0x0100 | (checksum & 0xFf)
elif (checksum & 0x00FF) == 0:
cflags = 0x3
checksum = 0x0001 | (checksum & 0xFF00)
# print "c1 adjusted: 0x%x" % checksum
result += struct.pack("<BH", cflags, checksum)
return result
def crc(self):
b = self.bytes()
# CRC is cal
s = self.bytes_to_hex(b[2:])
print("crc", s)
print("crc", crc16.crc16xmodem(s.decode("hex")),
hex(crc16.crc16xmodem(s.decode("hex"))))
return crc16.crc16xmodem(s.decode("hex"))
def _construct_cmd(self, _function_byte, _mode, _function_cmd='\x00'):
# create function byte
commands_struct._frame['function'] = commands_struct._function_code[_function_byte][0]
# command mode
if _mode not in commands_struct._function_code[_function_byte][1]:
print "_mode not in commands_struct._function_code[_function_byte][1]\n"
return False
# create byte_count
commands_struct._frame['byte_count'] = commands_struct._function_code[_function_byte][1][_mode]
# Bytes 1 - 6
bytes_1to6 = commands_struct._frame['pcode'] + commands_struct._frame['status'] + \
commands_struct._frame['reserved'] + commands_struct._frame['function'] + \
commands_struct._frame['byte_count']
# calculate crc1
# crc16.crc16xmodem() returns int
_crc1 = crc16.crc16xmodem(bytes_1to6)
(_x, _y) = self.crc_to_hex(_crc1)
commands_struct._frame['crc1'] = _x + _y
# Data byte (payload)
if _mode == 'set':
commands_struct._frame['data'] = commands_struct._function_code[_function_byte][2][_function_cmd]
# Bytes 1 - N
bytes_1toN = commands_struct._frame['pcode'] + commands_struct._frame['status'] + \
commands_struct._frame['reserved'] + commands_struct._frame['function'] + \
commands_struct._frame['byte_count'] + commands_struct._frame['crc1'] + \
commands_struct._frame['data']
print "bytes_1toN: \n"
for i in commands_struct._frame:
print i + " : " + commands_struct._frame[i].encode('hex')
print "\n"
# calculate crc2
_crc2 = crc16.crc16xmodem(bytes_1toN)
(_x, _y) = self.crc_to_hex(_crc2)
commands_struct._frame['crc2'] = _x + _y
# assemble command
_cmd = commands_struct._frame['pcode'] + commands_struct._frame['status'] + \
commands_struct._frame['reserved'] + commands_struct._frame['function'] + \
commands_struct._frame['byte_count'] + commands_struct._frame['crc1'] + \
commands_struct._frame['data'] + commands_struct._frame['crc2']
# Debug
print "Resp: " + commands_struct._function_code[_function_byte][1]['resp'].encode('hex')
print "Resp Int: " + str(int(commands_struct._function_code[_function_byte][1]['resp'].encode('hex')))
return (_cmd, 10 + int(commands_struct._function_code[_function_byte][1]['resp'].encode('hex')))
def ReceiveFile():
seqno = 0
ackno = 0
expectedSeqNo = 0
#try:
#filepath = filename
filesize, ClientAddress = serverSocket.recvfrom(2048)
#print(filesize)
filesize = int(filesize)
ReceivedBytes = 0
file = open('testfile', 'wb') # create local file in cwd
while True:
message, ClientAddress = serverSocket.recvfrom(
2048) # get up to 1K at a time
#s = struct.Struct(RUPHeaderFormat)
pktHeader, data = splitPacket(message)
#print(checkSum(message))
if expectedSeqNo == pktHeader[0] and checkSum(message):
ReceivedBytes = ReceivedBytes + len(data)
#print("Data len : " + str(len(data)))
#print("ReceivedBytes len : " + str(ReceivedBytes))
file.write(data) # write data in local file
dat = ""
header = makeHeader(
0, pktHeader[0], 0, 0,
crc16.crc16xmodem(
str(dat) + str(0) + str(pktHeader[0]) + str(0) + str(0)))
#print ("Sending ack with " , pktHeader[0])
pkt = makePacket(header, dat)
BadNet.transmit(serverSocket, pkt, ClientAddress[0],
ClientAddress[1])
#BadNet.transmit(pkt,ClientAddress)
expectedSeqNo = expectedSeqNo + 1
if ReceivedBytes == filesize:
break # till file received fully
else:
dat = ""
header = makeHeader(
0, expectedSeqNo - 1, 0, 0,
crc16.crc16xmodem(
str(dat) + str(0) + str(pktHeader[0]) + str(0) + str(0)))
#print ("Sending dup ack with " , expectedSeqNo-1)
pkt = makePacket(header, dat)
BadNet.transmit(serverSocket, pkt, ClientAddress[0],
ClientAddress[1])
file.close()
print 'File Received.'
return 0
def Gen(self):
r = self.header2 + self.pck(self.number_of_records, 4) + self.some_junk
k = ''
for i in self.file_records:
t = i.Gen()
r += t[0]
k += t[1]
data = r + '\x00' * (self.header_padding_size - 2)
self.crc16_header = crc16xmodem(data[:-2])
data += self.pck(self.crc16_header, 2) + k
return self.header1 + self.pck(crc16xmodem(data), 2) + data
def main():
data = open(sys.argv[1], 'rb').read()
crc = crc16.crc16xmodem(data)
# print(crc)
padded = data + bytes([crc >> 8, crc & 0xFF])
crc = crc16.crc16xmodem(padded)
# print(crc)
open(sys.argv[1], 'wb').write(padded)
def readResponse(self):
s = self.readWithTimeout(1) # SOH
# xxx loop til 0x0 found
assert(s == cobs.nullByte)
rc = self.readWithTimeout(1) # read response code
crc = crc16.crc16xmodem(rc)
cmd = ord(rc)
l = self.readWithTimeout(1) # read length byte
crc = crc16.crc16xmodem(l, crc)
length = ord(l) - 1
self.gui.logRecv("Response 0x%x, reading %d b" % (cmd, length))
payload = ""
if length:
payload = self.readWithTimeout(length) # read payload
crc = crc16.crc16xmodem(payload, crc)
(cflags, checkSum) = struct.unpack("<BH", self.readWithTimeout(3))
if cflags == 0x2:
checkSum -= 0x100;
elif cflags == 0x3:
checkSum -= 0x01;
elif cflags == 0x4:
checkSum -= 0x101;
if checkSum != crc:
print "RxChecksumError our: 0x%x, fw: 0x%x, payload: %s, cflags: 0x%x" % (crc, checkSum, (rc + l + payload).encode("hex"), cflags)
"""
# Drain input
try:
s = self.read()
print "RxChecksumError, drain input: %s" % s.encode("hex")
except SerialException:
pass
while s:
try:
s = self.read()
print "drain input: %s" % s.encode("hex")
except SerialException:
pass
"""
raise RxChecksumError()
# Decode COBS encode payload
payload = cobs.decodeCobs(payload)
return (cmd, payload)
def account_from_secret(secret):
"""Returns account-id given the secret"""
key = base64.b32decode(secret)
checksum = struct.pack('H', crc16.crc16xmodem(key[0:-2]))
keytype = binascii.a2b_hex(KEY_TYPES['seed'])
if key[0] != keytype or key[-2:] != checksum:
raise Exception('Invalid Secret Key')
signing_key = ed25519.SigningKey(key[1:-2])
payload = binascii.a2b_hex(
KEY_TYPES['public']) + signing_key.get_verifying_key().to_bytes()
checksum = crc16.crc16xmodem(payload)
checksum = struct.pack('H', checksum)
return base64.b32encode(payload + checksum)
def interpret_response (response, basic = False):
"""
Parse response from Aladdin pump.
Returns a tuple (address, status, message)
@param response: Message received. Should not include the
start / termination characters.
@param basic: Parse in basic mode (no checksum).
"""
# Reject empty response
if len(response) == 0:
raise SyntaxError
# Basic mode response in format:
# <address, 2 chars><status, one char><message>
if basic:
address = int(response[0:2])
status = response[2]
msg = response[3:]
# Safe mode response in format:
# <address, 2 chars><status, one char><message><checksum, 2 chars>
else:
msg = response[:-2]
crc = struct.unpack(">H", response[-2:])[0]
# Check that the checksum is as expected
if crc != crc16.crc16xmodem(msg):
raise SyntaxError(
"CRC does not match: %s, expected %s." %
(crc, crc16.crc16xmodem(msg))
)
address = int(msg[0:2])
status = msg[2]
msg = msg[3:]
# Catch alarms
if status == "A":
raise Alarm(msg)
# Catch errors
if len(msg) > 0 and msg[0] == '?':
raise CommandError(msg)
return address, status, msg
def from_upgrade_file(cls, file_or_bytes):
"""
Factory method that creates a FirmwareFile from a FLIR Upgrade.bin.
"""
bytes_in = cls._bytearray_from_file_or_bytes(file_or_bytes)
source = io.BytesIO(bytes_in)
target = io.BytesIO()
for chunk in cls.__read_in_blocks(source, cls.UPGRADE_BIN_SIZE_WITH_METADATA):
# Every data chunk starts with two bytes of CRC16, then
# two bytes of padding. The remainder of a chunk is data.
checksum = chunk[0:2]
padding = chunk[2:4]
data = chunk[4:]
# Check to make sure our padding are always zeroes.
if padding != b"\x00\x00":
issue = repr(padding)
raise IOError("Data format error! Expected 0x0000, got {}\n".format(issue))
# Check to make sure the CRCs are valid.
data_crc = crc16.crc16xmodem(data).to_bytes(2, byteorder='little')
if checksum != data_crc:
expected = repr(checksum)
actual = repr(data_crc)
raise IOError("CRC mismatch! Expected {}, got {}\n".format(expected, actual))
# Copy the unpacked data into our target object.
target.write(data)
return FirmwareFile(target.getvalue())
def __init__( self, messageType, session, payload=None ):
MedtronicMessage.__init__( self, 0x05, session )
# FIXME - make this not be hard coded
seqNo = 0x80
if messageType == 0x0403:
seqNo = 2
elif messageType == 0x0112:
seqNo = 3
elif messageType == 0x0115:
seqNo = 4
elif messageType == 0x0114:
seqNo = 5
elif messageType == 0x0200:
seqNo = 6
encryptedPayload = struct.pack( '>BH', seqNo, messageType )
if payload:
encryptedPayload += payload
crc = crc16.crc16xmodem( encryptedPayload, 0xffff )
encryptedPayload += struct.pack( '>H', crc & 0xffff )
mmPayload = struct.pack( '<QBBB',
self.session.pumpMAC,
self.session.minimedSequenceNumber,
0x10, # Unknown byte
len( encryptedPayload )
)
mmPayload += self.encrypt( encryptedPayload )
self.setPayload( mmPayload )
def processBuffer(buf, socket=None, channel=None, ser=None):
bufTail = ""
if len(buf) > 0:
# print "Read %i bytes:" % (len(buf))
pduPos = string.find(buf,cSSNSTART)
currentPos = pduPos
if ((pduPos >= 0) and (len(buf)-pduPos)>=14):
# process SSN PDU
#/* -- SSN serial protocol description -----------------------------------------
# *
# * Format: "===ssn1DDDDSSSSTTLLLL...CCCC"
# *
# * ===ssn1 - start packet (protocol version 1)
# * DDDD - destination object (2 byte: hex chars - 0-9, A-F)
# * SSSS - source object (2 byte: hex chars - 0-9, A-F)
# * TT - message type (1 byte: hex chars - 0-9, A-F)
# * LLLL - packet length (2 byte: hex chars - 0-9, A-F)
# * ... data
# * CCCC - CRC16 (2 byte: hex chars - 0-9, A-F)
# *
# * data sending in ascii format
# * timeout = 2 sec
# *
# * */
destObj, srcObj, msgType, packetLen = \
struct.unpack_from('<4s4s2s4s', buf, pduPos + len(cSSNSTART))
try:
# convert to integers
destObj = int(destObj, 16)
srcObj = int(srcObj, 16)
msgType = int(msgType, 16)
packetLen = int(packetLen, 16)
pduDataPos = pduPos + len(cSSNSTART)+14
if ((pduDataPos+packetLen+4)<=len(buf)):
pduData = buf[pduDataPos:pduDataPos+packetLen]
pduCRC = struct.unpack_from('<4s', buf, pduDataPos+packetLen)[0]
calcCRC = crc16.crc16xmodem(pduData, 0xffff)
pduCRC = int(pduCRC, 16)
if (calcCRC == pduCRC):
tmpMsg = ssnMsg(destObj=destObj, srcObj=srcObj, msgType=msgType, msgID=None, msgData=pduData, msgChannel=channel, msgSocket=socket, msgSerial = ser)
routeMessage(tmpMsg)
currentPos = pduDataPos+packetLen+4
else:
logWrite("CRC Error! dest[{}] src[{}] msg[{}...]".format(destObj,srcObj,pduData[0:20]))
currentPos = pduDataPos+packetLen+4
# check buffer tail
if (currentPos < len(buf)):
logWrite("continue process buffer:"+buf[currentPos:])
bufTail = processBuffer(buf[currentPos:])
else:
bufTail = buf[currentPos:]
except Exception, e:
currentPos = pduPos + 14
bufTail = buf[currentPos:]
logWrite("Error processing SSN PDU"+str(e))
else:
if (currentPos < 0):
bufTail = ""
else:
bufTail = buf[currentPos:]
def add_mii():
form = MiiUploadForm()
if form.validate_on_submit():
mii = form.mii.data
if mii:
data = mii.read()
mii_length = len(data)
# An uploaded Mii can be with or without its checksum.
# We'll insert one ourselves all the same.
if mii_length == 74 or mii_length == 76:
# If we do have a checksum, split it off.
real_data = data[:74]
checksum = crc16.crc16xmodem(real_data).to_bytes(
length=2, byteorder="big")
# Insert this to the database.
full_mii = real_data + checksum
insert_row = MiiData(data=full_mii)
db.session.add(insert_row)
db.session.commit()
return redirect(url_for("list_miis"))
else:
flash("Invalid Mii uploaded")
else:
flash("Error uploading Mii")
return render_template("add_mii.html", form=form)
def check_if_packet(byte: bytes):
self.bytes_received.append(byte)
for start_index in self._get_all_start_bytes():
length = 0
try:
length = self.bytes_received[start_index + 1]
if (self.bytes_received[start_index + length + 4] !=
Macros.STOP_BYTE):
continue
except IndexError:
continue
# Packet slice
packet = self.bytes_received[start_index:start_index + 4 + length]
# Get data
data = packet[2:length + 2]
# Get checksum
checksum = packet[length + 2] << 8
checksum = checksum | packet[length + 3]
# Compare computed checksum with bytes_received
if (crc16xmodem(packet[:length + 2]) == checksum):
print(data)
self.bytes_received = b''
def encodeHeaderMessage(data, crcCalcDataArray):
"""
The function encodes the arguments to a byte array with 8 bytes.
Parameters
----------
data : dict
instruction header dictionary
crcCalcDataArray : list
data for the calculation of the crc value
Returns
-------
headerMessage : bytearray
encoded header message
"""
# provide raw header message
headerMessage = bytearray(8)
# Encode the UDT-Index
headerMessage[0:2] = struct.pack('<H', data['UDT-Index'])
# Encode the version number
headerMessage[2:4] = struct.pack('<H', data['version'])
# Encode the device ID
headerMessage[4] = data['deviceId']
# Encode the number of instructions
headerMessage[5] = data['numberOfInstructions']
# Calculate the crc value. Over instruction message 1-3 for all instructions. Header is ignored for CRC
# calculation.
initCrc = 0xFFFF
calcCRC = crc16.crc16xmodem(bytes(crcCalcDataArray), initCrc)
# Encode the crc value
headerMessage[6:8] = struct.pack('<H', calcCRC)
return headerMessage
def __init__(self, messageType, session, payload=None):
MedtronicMessage.__init__(self, 0x05, session)
# FIXME - make this not be hard coded
if messageType == 0x0412:
seqNo = self.session.sendSequenceNumber | 0x80
else:
seqNo = self.session.sendSequenceNumber
encryptedPayload = struct.pack('>BH', seqNo, messageType)
if payload:
encryptedPayload += payload
crc = crc16.crc16xmodem(encryptedPayload, 0xffff)
encryptedPayload += struct.pack('>H', crc & 0xffff)
#print "### PAYLOAD"
#print binascii.hexlify( encryptedPayload )
mmPayload = struct.pack(
'<QBBB',
self.session.pumpMAC,
self.session.minimedSequenceNumber,
0x10, # Unknown byte
len(encryptedPayload))
mmPayload += self.encrypt(encryptedPayload)
self.setPayload(mmPayload)
self.session.sendSequenceNumber += 1
def send_packet(self, data: bytes) -> bool:
length = len(data)
# Check that data is less than or equal to 255 bytes
if (length > 255):
return False
# Start byte
self.byte_layer.send_byte(Macros.START_BYTE)
# Length
self.byte_layer.send_byte(length)
# Data
for b in data:
print(str(chr(b)))
self.byte_layer.send_byte(b)
# Checksum
crc = crc16xmodem(bytes([Macros.START_BYTE, length]) + data)
crc_top = crc >> 8
crc_bottom = crc & 0xFF
self.byte_layer.send_byte(crc_top)
self.byte_layer.send_byte(crc_bottom)
# Stop byte
self.byte_layer.send_byte(Macros.STOP_BYTE)
return True
def build_send_str(string):
str_arr = bytearray()
dle = bool()
crc = crc16.crc16xmodem(str(string), 0x0000)
str_arr.append(STX)
for c in string:
if (c == DLE) | (c == STX) | (c == ETX):
str_arr.append(DLE)
str_arr.append(c)
crcH = (crc >> 0 & 0xff)
crcL = (crc >> 8 & 0xff)
if (crcH == DLE) | (crcH == STX) | (crcH == ETX):
str_arr.append(DLE)
str_arr.append(crcH)
if (crcL == DLE) | (crcL == STX) | (crcL == ETX):
str_arr.append(DLE)
str_arr.append(crcL)
str_arr.append(ETX)
#for c in str_arr:
#print hex(c)
return str_arr
def check_crc(string):
'''
print "Komplette Daten:"
for c in string:
print "%#x" % ord(c)
print "_________________________"
print "Rohdaten:"
for c in clean_data(string):
print "%#x" % ord(c) '''
crc = crc16.crc16xmodem(clean_data(string), 0x0000)
crc_arr = bytearray()
crc_arr.append(crc >> 0 & 0xff)
crc_arr.append(crc >> 8 & 0xff)
recv_str_w_CRC = clean_data_w_CRC(string)
recv_crcH = recv_str_w_CRC[recv_str_w_CRC.__len__() - 1]
recv_crcL = recv_str_w_CRC[recv_str_w_CRC.__len__() - 2]
'''
print "Empfangene CRC"
print "%#x" % ord(recv_crcH)
print "%#x" % ord(recv_crcL)
print "Errechnete CRC"
print "%#x" % crc_arr[0]
print "%#x" % crc_arr[1]
'''
if (crc_arr[0] == ord(recv_crcL)) & (crc_arr[1] == ord(recv_crcH)):
return 1
else:
return 0
def __init__(self):
with open(os.path.join(os.path.dirname(__file__), 'config.json'),
'r',
encoding='utf-8-sig') as file:
_conf = json.load(file)
uart_cfg = _conf.get('UART')
uart_port_read = uart_cfg['port_read']
uart_port_write = uart_cfg['port_write']
uart_baudrate = uart_cfg['baudrate']
uart_timeout = uart_cfg['timeout']
socket_cfg = _conf.get('SOCKET')
socket_port = socket_cfg['port']
socket_ip = socket_cfg['ip']
self.port = uart_port_read
self.port_write = uart_port_write
self.baudrate = uart_baudrate
self.timeout = uart_timeout
self.ser = serial.Serial(port=self.port,
baudrate=self.baudrate,
timeout=self.timeout)
self.ser_write = serial.Serial(port=self.port_write,
baudrate=self.baudrate,
timeout=self.timeout)
self.preamble = b'\x5A\x5A'
self.size = 10
self.device_type = 255
self.device_id = 255
self.mess = 0
self.body = struct.pack('BBBB', self.size, self.device_type,
self.device_id, self.mess)
self.crc = (crc16.crc16xmodem(self.body))
self.postamble = b'\x7A\x7a'
def serial_transmit_message(msg):
"""Frame up and send a message to the badge
The message should contain only printable characters.
"""
crc = '{0:04x}'.format(crc16.crc16xmodem(msg)).encode('ascii')
uart.send(frame_flag + msg + crc + frame_flag)
def format_command(address, command):
"""
Format a command for transmission to Aladdin pump in Safe Mode.
Result includes the length and checksum but not the
start / termination characters (\x02 and \x03).
@param address: Numeric address of the pump, 0-99, or None.
@param command: Textual command to send.
"""
# Confirm address parameter
if address > 99:
raise SyntaxError("Invalid Address: %s" % address)
if address is not None:
command = "{:02d}{:s}".format(address, command)
# Account for the length byte, the two crc bytes
# and the termination byte
length = len(command) + 4
if length > 255:
raise SyntaxError("Command too long: %s" % command)
crc = struct.pack(">H", crc16.crc16xmodem(command))
return "{:c}{:s}{:s}".format(length, command, crc)
def read_rs232_packet():
c = ser.read()
if c != b'\x00':
# print("Not recv 00")
# print(c)
return None
id = ser.read()
if id != b'\x50' and id != b'\x60' and id != b'\x70' :
print("Not recv ID")
print(id)
return None
len = struct.unpack('>B', ser.read())[0]
if len <= 2 :
print("Len too short")
return None
packet = b'\x00'
packet += id
packet += struct.pack('>B', len)
packet += ser.read(len-5)
crc_recv = struct.unpack('>H', ser.read(2))[0]
crc_calc = crc16.crc16xmodem(packet)
if crc_recv != crc_calc :
print("CRC fail")
print(crc_recv, " ", crc_calc)
return None
# print_in_hex(packet[3:])
return packet+struct.pack('>H', crc_calc)
def verify_match(self, header, offset):
"""Verify DDR4 specific bit fields."""
# offset 0 is a candidate, no need to validate
if self.blob_as_ord(offset + 1) == 0xff:
return False
if self.blob_as_ord(offset + 2) != 0x0c:
return False
if self.blob_as_ord(offset + 5) & 0xc0 > 0:
return False
if self.blob_as_ord(offset + 6) & 0xc > 0:
return False
if self.blob_as_ord(offset + 7) & 0xc0 > 0:
return False
if self.blob_as_ord(offset + 8) != 0:
return False
if self.blob_as_ord(offset + 9) & 0xf > 0:
return False
if self.verbose:
print("%x: Looks like DDR4 SPD" % offset)
crc = crc16.crc16xmodem(self.blob[offset:offset + 0x7d + 1])
# Vendors ignore the endianness...
crc_spd1 = self.blob_as_ord(offset + 0x7f)
crc_spd1 |= (self.blob_as_ord(offset + 0x7e) << 8)
crc_spd2 = self.blob_as_ord(offset + 0x7e)
crc_spd2 |= (self.blob_as_ord(offset + 0x7f) << 8)
if crc != crc_spd1 and crc != crc_spd2:
if self.verbose:
print("%x: CRC16 doesn't match" % offset)
if not self.ignorecrc:
return False
return True
def format_command (address, command):
"""
Format a command for transmission to Aladdin pump in Safe Mode.
Result includes the length and checksum but not the
start / termination characters (\x02 and \x03).
@param address: Numeric address of the pump, 0-99, or None.
@param command: Textual command to send.
"""
# Confirm address parameter
if address > 99:
raise SyntaxError("Invalid Address: %s" % address)
if address is not None:
command = "{:02d}{:s}".format(address, command)
# Account for the length byte, the two crc bytes
# and the termination byte
length = len(command) + 4
if length > 255:
raise SyntaxError("Command too long: %s" % command)
crc = struct.pack(">H", crc16.crc16xmodem(command))
return "{:c}{:s}{:s}".format(length, command, crc)
def check_crc(string):
'''
print "Komplette Daten:"
for c in string:
print "%#x" % ord(c)
print "_________________________"
print "Rohdaten:"
for c in clean_data(string):
print "%#x" % ord(c) '''
crc = crc16.crc16xmodem(clean_data(string), 0x0000)
crc_arr = bytearray()
crc_arr.append(crc >> 0 & 0xff)
crc_arr.append(crc >> 8 & 0xff)
recv_str_w_CRC = clean_data_w_CRC(string)
recv_crcH = recv_str_w_CRC[recv_str_w_CRC.__len__()-1]
recv_crcL = recv_str_w_CRC[recv_str_w_CRC.__len__()-2]
'''
print "Empfangene CRC"
print "%#x" % ord(recv_crcH)
print "%#x" % ord(recv_crcL)
print "Errechnete CRC"
print "%#x" % crc_arr[0]
print "%#x" % crc_arr[1]
'''
if (crc_arr[0] == ord(recv_crcL)) & (crc_arr[1] == ord(recv_crcH)):
return 1
else:
return 0
def pos_range(filename):
'''return min/max of lat/lon in a file'''
fh = open(filename, 'rb')
lat_min = None
lat_max = None
lon_min = None
lon_max = None
while True:
buf = fh.read(IO_BLOCK_SIZE)
if len(buf) != IO_BLOCK_SIZE:
break
(bitmap, lat, lon, crc, version, spacing) = struct.unpack("<QiiHHH", buf[:22])
if (version != TERRAIN_GRID_FORMAT_VERSION):
print("Bad version %u in %s" % (version, filename))
break
buf = buf[:16] + struct.pack("<H", 0) + buf[18:]
crc2 = crc16.crc16xmodem(buf[:IO_BLOCK_DATA_SIZE])
if crc2 != crc:
print("Bad CRC in %s" % filename)
break
if lat_min is None:
lat_min = lat
lat_max = lat
lon_min = lon
lon_max = lon
lat_min = min(lat_min, lat)
lat_max = max(lat_max, lat)
lon_min = min(lon_min, lon)
lon_max = max(lon_max, lon)
lat_min *= 1.0e-7
lat_max *= 1.0e-7
lon_min *= 1.0e-7
lon_max *= 1.0e-7
return lat_min, lat_max, lon_min, lon_max
def kill_app():
print "--> Kill Application now"
print "-----------------------------------------------"
send_data = bytearray()
send_data.append(0xff)
send_data.append(0x03)
send_data.append(0xf5)
crc = crc16.crc16xmodem(str(send_data), 0xffff)
send_data.append(crc >> 8 & 0xff)
send_data.append(crc >> 0 & 0xff)
s.send(send_data)
try:
recv_data = s.recv(BUFFER_SIZE)
except socket.timeout:
print "x"
recv_data = ""
if recv_data:
print "Response from PIC:", recv_data
def verify_match(self, header, offset):
"""Verify DDR4 specific bit fields."""
# offset 0 is a candidate, no need to validate
if self.blob_as_ord(offset + 1) == 0xff:
return False
if self.blob_as_ord(offset + 2) != 0x0c:
return False
if self.blob_as_ord(offset + 5) & 0xc0 > 0:
return False
if self.blob_as_ord(offset + 6) & 0xc > 0:
return False
if self.blob_as_ord(offset + 7) & 0xc0 > 0:
return False
if self.blob_as_ord(offset + 8) != 0:
return False
if self.blob_as_ord(offset + 9) & 0xf > 0:
return False
if self.verbose:
print("%x: Looks like DDR4 SPD" % offset)
crc = crc16.crc16xmodem(self.blob[offset:offset + 0x7d + 1])
# Vendors ignore the endianness...
crc_spd1 = self.blob_as_ord(offset + 0x7f)
crc_spd1 |= (self.blob_as_ord(offset + 0x7e) << 8)
crc_spd2 = self.blob_as_ord(offset + 0x7e)
crc_spd2 |= (self.blob_as_ord(offset + 0x7f) << 8)
if crc != crc_spd1 and crc != crc_spd2:
if self.verbose:
print("%x: CRC16 doesn't match" % offset)
if not self.ignorecrc:
return False
return True
def mac_address_to_id(mac):
"""Converts a MAC address to an id used by the badges for the proximity pings.
"""
# convert hex to bytes and reverse
macstr = mac.replace(':', '').decode('hex')[::-1]
crc = crc16.crc16xmodem(macstr, 0xFFFF)
return crc
def __init__(self, messageType, session, payload=None):
MedtronicMessage.__init__(self, 0x05, session)
# FIXME - make this not be hard coded
seqNo = 0x80
if messageType == 0x0403:
seqNo = 2
elif messageType == 0x0112:
seqNo = 3
encryptedPayload = struct.pack('>BH', seqNo, messageType)
if payload:
encryptedPayload += payload
crc = crc16.crc16xmodem(encryptedPayload, 0xffff)
encryptedPayload += struct.pack('>H', crc & 0xffff)
mmPayload = struct.pack(
'<QBBB',
self.session.pumpMAC,
self.session.minimedSequenceNumber,
0x10, # Unknown byte
len(encryptedPayload))
mmPayload += self.encrypt(encryptedPayload)
self.setPayload(mmPayload)
def build_send_str(string):
str_arr = bytearray()
dle = bool()
crc = crc16.crc16xmodem(str(string), 0x0000)
str_arr.append(0x0f)
for c in string:
if (c == 0x05)|(c == 0x0f)|(c == 0x04):
str_arr.append(0x05)
str_arr.append(c)
crcH = (crc >> 0 & 0xff)
crcL = (crc >> 8 & 0xff)
if (crcH == 0x05)|(crcH == 0x0f)|(crcH == 0x04):
str_arr.append(0x05)
str_arr.append(crcH)
if (crcL == 0x05)|(crcL == 0x0f)|(crcL == 0x04):
str_arr.append(0x05)
str_arr.append(crcL)
str_arr.append(0x04)
#for c in str_arr:
#print hex(c)
return str_arr
def transfer_file(self):
data = self.get_data_block()
while len(data) > 0:
crc = 0
for x in data:
crc = crc16.crc16xmodem(str(x), crc)
tmp = bytearray(2)
tmp[0] = crc & 0xFF
tmp[1] = (crc & 0xFF00) >> 8
result = 'NACK'
while result == 'NACK':
print "sending:BLK"
self.port.write('BLK')
print "sending data:",[str(x) for x in data]
self.port.write(data)
print "sending tmp:",[str(x) for x in tmp]
self.port.write(tmp)
result = self.wait_for_response()
if result == 'PACK':
data = self.get_data_block()
else:
#got something weird back, quit early
return 'FAIL'
self.port.write('EOF')
return 'DONE'
def check_filled(block, lat_int, lon_int, grid_spacing):
'''check a block for validity'''
if len(block) != IO_BLOCK_SIZE - 227:
print("Bad size {0} of {1}".format(len(block), IO_BLOCK_SIZE))
return False
(bitmap, lat, lon, crc, version,
spacing) = struct.unpack("<QiiHHH", block[:22])
if (lat == 0 and lon == 0 and crc == 0 and version == 0 and spacing == 0):
#print("Empty block")
return True
if (str(version) != str(TERRAIN_GRID_FORMAT_VERSION)):
print("Bad version: " + str(version))
return False
if abs(lat_int - (lat / 1E7)) > 2 or abs(lon_int - (lon / 1E7)) > 2:
print("Bad lat/lon: {0}, {1}".format((lat / 1E7), (lon / 1E7)))
return False
if spacing != 100:
print("Bad spacing: " + str(spacing))
return False
if bitmap != (1 << 56) - 1:
print("Bad bitmap")
return False
block = block[:16] + struct.pack("<H", 0) + block[18:]
crc2 = crc16.crc16xmodem(block[:1821])
if crc2 != crc:
print("Bad CRC")
return False
# all is good, return lon/lat of block
return (lat, lon)
def to_upgrade_file(self, file_or_filename):
"""
Packs a raw binary into a TG165 image.
file_or_filename: The filename that should be written, or
a file-like object to write to.
"""
close_needed = False
source = io.BytesIO(self.raw_bytes)
if isinstance(file_or_filename, str):
target = open(file_or_filename, 'wb')
close_needed = True
else:
target = file_or_filename
for data in self.__read_in_blocks(source, self.UPGRADE_BIN_DATA_SIZE):
# Compute the CRC of the chunk.
data_crc = crc16.crc16xmodem(data).to_bytes(2, byteorder='little')
# Write the chunk with checksum in the FLIR-expected format.
target.write(data_crc)
target.write(b"\x00\x00")
target.write(data)
if close_needed:
target.close()
def build_send_str(string):
str_arr = bytearray()
dle = bool()
crc = crc16.crc16xmodem(str(string), 0x0000)
str_arr.append(STX)
for c in string:
if (c == DLE)|(c == STX)|(c == ETX):
str_arr.append(DLE)
str_arr.append(c)
crcH = (crc >> 0 & 0xff)
crcL = (crc >> 8 & 0xff)
if (crcH == DLE)|(crcH == STX)|(crcH == ETX):
str_arr.append(DLE)
str_arr.append(crcH)
if (crcL == DLE)|(crcL == STX)|(crcL == ETX):
str_arr.append(DLE)
str_arr.append(crcL)
str_arr.append(ETX)
#for c in str_arr:
#print hex(c)
return str_arr
def send(self, value):
packet = self.build_packet(value)
byte_str = ''.join([chr(b) for b in packet])
crc = crc16.crc16xmodem(byte_str)
byte_str += struct.pack('H', crc)
r = self.port.write(byte_str)
self.port.flush()
print 'Sent %s as %s bytes' % (value, r)
def run(self):
self.stream_data = True
ps = self.packet_size['ps']
read_size = 300
np = 0
data = b''
command = "wbaoms"
res = send_command(self.faros_socket, command, 7)
command = "wbaom7"
res = send_command(self.faros_socket, command, 7)
p_crc = Struct('packet_format', Array(1, ULInt16('crc')))
self.faros_socket.setblocking(True)
while (self.stream_data):
data += self.faros_socket.recv(read_size)
if len(data) >= ps:
packet = data[0:ps]
data = data[ps:]
signature = packet[0:3]
try:
crc_1 = p_crc.parse(packet[-2:])['crc'][0]
crc_2 = crc16.crc16xmodem(packet[:-2])
except TypeError:
crc_1 = 0
crc_2 = 1
if (signature == b'MEP') & (crc_1 == crc_2):
unpack_data(packet = packet,
packet_size = self.packet_size,
p_header = self.p_header,
p_ecg = self.p_ecg,
p_acc = self.p_acc,
p_marker = self.p_marker,
p_rr = self.p_rr,
p_temp = self.p_temp,
outlet_ecg = self.outlet_ecg,
outlet_acc = self.outlet_acc,
outlet_marker = self.outlet_marker,
outlet_rr = self.outlet_rr,
outlet_temp = self.outlet_temp)
# np += 1
else:
while True:
tmp = self.faros_socket.recv(read_size)
if tmp[0:3] == b'MEP':
data = tmp
break
def buildBinaryCommand(self, binCmd, binPayload=None):
payloadSize = 0
if binPayload:
payloadSize = len(binPayload)
# print "Send payload: %s" % binPayload.encode("hex")
# print "Send payload: ", payloadSize, cobs.LenCobs
assert(payloadSize <= cobs.LenCobs)
#
# Not block: SOH(1) line(1) cmd(1) size(4) [ data ] chksum(2) -> max payload = 254 (COBS) - 9 = 245
# Block: SOH(1) line(1) cmd(1) size(2) [ data ] chksum(2)
#
binary = struct.pack("<B", SOH)
header = struct.pack("<BBB", self.lineNr, binCmd, payloadSize+0x01)
binary += header
checksum = crc16.crc16xmodem(header)
if binPayload:
binary += binPayload
checksum = crc16.crc16xmodem(binPayload, checksum)
# print "cflags, c1: 0x%x, 0x%x" % (cflags, checksum)
cflags = 0x1
if checksum == 0:
cflags = 0x4
checksum = 0x0101
elif (checksum & 0xFF00) == 0:
cflags = 0x2
checksum = 0x0100 | (checksum & 0xFf)
elif (checksum & 0x00FF) == 0:
cflags = 0x3
checksum = 0x0001 | (checksum & 0xFF00)
# self.gui.log("checkSum: ", checkSum, "0x%x" % checkSum)
binary += struct.pack("<BH", cflags, checksum)
# Store for later possible command resend
self.lastCommands[self.lineNr] = binary
self.incLineNumber()
return binary
def decodePacket(packet, decodePacketNr=True):
ofs = 0
assert(packet[ofs] == nullByte)
ofs += 1
line = 0
if decodePacketNr:
line = ord(packet[ofs])
ofs += 1
cmd = ord(packet[ofs])
ofs += 1
# n = ord(packet[3]) - 1
n = struct.unpack("<B", packet[ofs:ofs+LenLen])[0] - 0x01
ofs += LenLen
if decodePacketNr:
assert(len(packet) == n+LenHeader)
else:
if len(packet) != n+LenHeader-1:
print "Packet len error: payload(0x%x)+HeaderSize(0x%x) 0x%x != packetLength(0x%x)" % (n, LenHeader-1, n+LenHeader-1, len(packet))
assert(0)
# print "line, cmd, n:", line, cmd, n
result = packet[ofs:ofs+n]
ofs += n
cflags = ord(packet[ofs])
ofs += 1
# c1 = crc16.crc16xmodem(packet[1:n+LenHeader-4])
c1 = crc16.crc16xmodem(packet[1:-3])
(c2, ) = struct.unpack("<H", packet[ofs:ofs+2])
assert (cflags in [0x1, 0x2, 0x3, 0x4])
# print "cflags, c1, c2: 0x%x, 0x%x, 0x%x" % (cflags, c1, c2)
# xxx
if cflags == 0x2:
c2 = c2 - 0x0100;
elif cflags == 0x3:
c2 = c2 - 0x1;
elif cflags == 0x4:
c2 = c2 - 0x0101;
# print "c2 adjusted: 0x%x" % c2
assert(c1 == c2)
return (line, cmd, n, result)
def check_CRC(self, message):
'''
Given a message with a checksum as the last two bytes, this will return True or False
if the checksum matches the given message.
'''
msg_checksum = message[-2:]
raw_message = message[:-2]
crc = crc16.crc16xmodem(raw_message, 0xFFFF)
# If the two match the message was correct
if crc == struct.unpack('>H', msg_checksum)[0]:
return True
else:
return False
def key2slot(key):
"""
Calculate keyslot for a given key.
This also works for binary keys that is used in python 3.
"""
k = unicode(key)
start = k.find("{")
if start > -1:
end = k.find("}", start + 1)
if end > -1 and end != start + 1:
k = k[start + 1:end]
return crc16.crc16xmodem(k) % RedisClusterHashSlots
def check_crc(string):
crc = crc16.crc16xmodem(clean_data(string), 0x0000)
crc_arr = bytearray()
crc_arr.append(crc >> 0 & 0xff)
crc_arr.append(crc >> 8 & 0xff)
recv_crcH = string[string.__len__()-2]
recv_crcL = string[string.__len__()-3]
#print "%#x" % ord(recv_crcH)
#print "%#x" % ord(recv_crcL)
#print "%#x" % crc_arr[0]
#print "%#x" % crc_arr[1]
if (crc_arr[0] == ord(recv_crcL)) & (crc_arr[1] == ord(recv_crcH)):
return 1
else:
return 0
def serialize(self, message):
final_message = list()
# prefix message
final_message.append(kamstrup_constants.RESPONSE_MAGIC)
final_message.append(self.communication_address)
# add the original content
for c in message:
final_message.append(c)
# generate and append checksum
crc = crc16.crc16xmodem(b''.join([chr_py3(item) for item in final_message[1:]]))
final_message.append(crc >> 8)
final_message.append(crc & 0xff)
# trailing magic
final_message.append(kamstrup_constants.EOT_MAGIC)
escaped_message = self.escape(final_message)
return escaped_message
def build_packet(self, command, payload=None):
#todo: In C#, they overload this function based on payload type.
# no payload: num=6
# byte: num=7
# short/ushort: num=8
# int/uint: num=10
# long/ulong: num=14
# there's even a case for payload, payload2
MaxPayloadLength = 1584
MinPacketLength = 6
MaxPacketLength = 1590
packet = bytearray(1590)
num = 6;
packet[0] = 1
packet[1] = num
packet[3] = command
crc = crc16.crc16xmodem(str(packet)[0:num-2])
self.store_bytes(crc, packet, num-2)
return packet
def get_register(self, register):
message = [kamstrup_constants.REQUEST_MAGIC, self.comm_address, 0x10, 0x01, register >> 8, register & 0xff]
crc = crc16.crc16xmodem(''.join([chr(item) for item in message[1:]]))
message.append(crc >> 8)
message.append(crc & 0xff)
message_length = len(message)
y = 1
while y < message_length:
if message[y] in kamstrup_constants.NEED_ESCAPE:
message[y] ^= 0xff
message.insert(y, kamstrup_constants.ESCAPE)
y += 1
message_length += 1
y += 1
message.append(kamstrup_constants.EOT_MAGIC)
received_data = None
while received_data is None:
try:
self._sock.send(bytearray(message))
received_data = self._sock.recv(1024)
received_data = bytearray(received_data)
except socket.error as socket_err:
print('Error while communicating: {0}'.format(str(socket_err)))
self._connect()
data_length = len(received_data)
# remove escaped bytes
p = 0
while p < data_length:
if received_data[p] is kamstrup_constants.ESCAPE:
del received_data[p]
received_data[p] ^= 0xff
data_length -= 1
p += 1
return received_data
def _send_command(self, command):
if self.safe_mode:
encoded_command = command.encode('ascii')
length = len(encoded_command) + 4
check_sum = crc16.crc16xmodem(encoded_command).to_bytes(2, byteorder='big')
to_send = bytes([2, length]) + encoded_command + check_sum + b'\x03'
add = '{:0>2}'.format(n).encode('ascii')
to_send_add = add + to_send
self.serial.write(to_send)
time.sleep(0.5)
waiting = self.serial.inWaiting()
reply = self.serial.read(waiting)
# FIXME implement crc16 checksum check
return reply.decode('ascii')
else:
formatted_command = command + "\r"
self.serial.write(formatted_command.encode("ascii"))
time.sleep(0.5)
waiting = self.serial.inWaiting()
reply = self.serial.read(waiting)
reply_unicode = reply.decode("ascii")
return reply_unicode[4:-1]
def valid_crc(self, message):
supplied_crc = message[-2] * 256 + message[-1]
calculated_crc = crc16.crc16xmodem(''.join([chr(item) for item in message[:-2]]))
return supplied_crc == calculated_crc
def calculateCcitt( self, data ):
crc = crc16.crc16xmodem( data, 0xffff )
return crc & 0xffff
def encode( self ):
# Increment the Minimed Sequence Number
self.session.minimedSequenceNumber += 1
message = self.envelope + self.payload
crc = struct.pack( '<H', crc16.crc16xmodem( message, 0xffff ) & 0xffff )
return message + crc
