def cullOffsetsRoipac(offsets, numThreshold=50):
'''
cull offsets using fortran program from ROI_PAC
numThreshold: minmum number of offsets left
'''
import os
from contrib.alos2proc_f.alos2proc_f import fitoff
from isceobj.Alos2Proc.Alos2ProcPublic import readOffset
from isceobj.Alos2Proc.Alos2ProcPublic import writeOffset
offsetFile = 'offset.off'
cullOffsetFile = 'cull.off'
writeOffset(offsets, offsetFile)
#try different parameters to cull offsets
breakFlag = 0
for maxrms in [0.08, 0.16, 0.24]:
for nsig in [1.5, 1.4, 1.3, 1.2, 1.1, 1.0, 0.9]:
fitoff(offsetFile, cullOffsetFile, nsig, maxrms, numThreshold)
#check number of matching points left
with open(cullOffsetFile, 'r') as ff:
numCullOffsets = sum(1 for linex in ff)
if numCullOffsets < numThreshold:
print(
'offsets culling with nsig {} maxrms {}: {} left after culling, too few points'
.format(nsig, maxrms, numCullOffsets))
else:
print(
'offsets culling with nsig {} maxrms {}: {} left after culling, success'
.format(nsig, maxrms, numCullOffsets))
breakFlag = 1
break
if breakFlag == 1:
break
if numCullOffsets < numThreshold:
refinedOffsets = None
else:
refinedOffsets = readOffset(cullOffsetFile)
os.remove(offsetFile)
os.remove(cullOffsetFile)
return refinedOffsets
#in isce the value is set to 0.001 1000.0
#SNR and Covariance Thresholds (-) = {s1} {s2}
#should add the following in Ampcor?
#THIS SHOULD BE THE ONLY THING THAT IS DIFFERENT FROM THAT OF ROI_PAC
#ampcor.setThresholdSNR(0)
#ampcor.setThresholdCov(1)
ampcor.setDebugFlag(False)
ampcor.setDisplayFlag(False)
#in summary, only two things not set which are indicated by 'The following not set' above.
#run ampcor
ampcor.ampcor()
offsets = ampcor.getOffsetField()
ampcorOffsetFile = os.path.join(secondaryDir, 'ampcor.off')
writeOffset(offsets, ampcorOffsetFile)
#finalize image, and re-create it
#otherwise the file pointer is still at the end of the image
mSLC.finalizeImage()
sSLC.finalizeImage()
##########################################
#3. cull offsets
##########################################
refinedOffsets = cullOffsets(offsets)
if refinedOffsets == None:
print(
'******************************************************************'
)
print(
def runSlcOffset(self):
'''estimate SLC offsets
'''
if hasattr(self, 'doInSAR'):
if not self.doInSAR:
print('\nInSAR processing not requested, skip this and the remaining InSAR steps...')
return
catalog = isceobj.Catalog.createCatalog(self._insar.procDoc.name)
self.updateParamemetersFromUser()
referenceTrack = self._insar.loadTrack(reference=True)
secondaryTrack = self._insar.loadTrack(reference=False)
demFile = os.path.abspath(self._insar.dem)
wbdFile = os.path.abspath(self._insar.wbd)
for i, frameNumber in enumerate(self._insar.referenceFrames):
frameDir = 'f{}_{}'.format(i+1, frameNumber)
os.chdir(frameDir)
for j, swathNumber in enumerate(range(self._insar.startingSwath, self._insar.endingSwath + 1)):
swathDir = 's{}'.format(swathNumber)
os.chdir(swathDir)
print('estimating offset frame {}, swath {}'.format(frameNumber, swathNumber))
referenceSwath = referenceTrack.frames[i].swaths[j]
secondarySwath = secondaryTrack.frames[i].swaths[j]
##########################################
#1. set number of matching points
##########################################
#set initinial numbers
if (self._insar.modeCombination == 21) or (self._insar.modeCombination == 22):
numberOfOffsetsRange = 10
numberOfOffsetsAzimuth = 40
else:
numberOfOffsetsRange = 20
numberOfOffsetsAzimuth = 20
#change the initial numbers using water body
if self.useWbdForNumberOffsets and (self._insar.wbd != None):
numberRangeLooks=100
numberAzimuthLooks=100
#compute land ratio using topo module
topo(referenceSwath, referenceTrack, demFile, 'lat.rdr', 'lon.rdr', 'hgt.rdr', losFile='los.rdr',
incFile=None, mskFile=None,
numberRangeLooks=numberRangeLooks, numberAzimuthLooks=numberAzimuthLooks, multilookTimeOffset=False)
waterBodyRadar('lat.rdr', 'lon.rdr', wbdFile, 'wbd.rdr')
wbdImg = isceobj.createImage()
wbdImg.load('wbd.rdr.xml')
width = wbdImg.width
length = wbdImg.length
wbd = np.fromfile('wbd.rdr', dtype=np.byte).reshape(length, width)
landRatio = np.sum(wbd==0) / (length*width)
if (landRatio <= 0.00125):
print('\n\nWARNING: land too small for estimating slc offsets at frame {}, swath {}'.format(frameNumber, swathNumber))
print('proceed to use geometric offsets for forming interferogram')
print('but please consider not using this swath\n\n')
catalog.addItem('warning message', 'land too small for estimating slc offsets at frame {}, swath {}, use geometric offsets'.format(frameNumber, swathNumber), 'runSlcOffset')
#compute geomtricla offsets
geo2rdr(secondarySwath, secondaryTrack, 'lat.rdr', 'lon.rdr', 'hgt.rdr', 'rg.rdr', 'az.rdr', numberRangeLooks=numberRangeLooks, numberAzimuthLooks=numberAzimuthLooks, multilookTimeOffset=False)
reformatGeometricalOffset('rg.rdr', 'az.rdr', 'cull.off', rangeStep=numberRangeLooks, azimuthStep=numberAzimuthLooks, maximumNumberOfOffsets=2000)
os.remove('lat.rdr')
os.remove('lat.rdr.vrt')
os.remove('lat.rdr.xml')
os.remove('lon.rdr')
os.remove('lon.rdr.vrt')
os.remove('lon.rdr.xml')
os.remove('hgt.rdr')
os.remove('hgt.rdr.vrt')
os.remove('hgt.rdr.xml')
os.remove('los.rdr')
os.remove('los.rdr.vrt')
os.remove('los.rdr.xml')
os.remove('wbd.rdr')
os.remove('wbd.rdr.vrt')
os.remove('wbd.rdr.xml')
os.remove('rg.rdr')
os.remove('rg.rdr.vrt')
os.remove('rg.rdr.xml')
os.remove('az.rdr')
os.remove('az.rdr.vrt')
os.remove('az.rdr.xml')
os.chdir('../')
continue
os.remove('lat.rdr')
os.remove('lat.rdr.vrt')
os.remove('lat.rdr.xml')
os.remove('lon.rdr')
os.remove('lon.rdr.vrt')
os.remove('lon.rdr.xml')
os.remove('hgt.rdr')
os.remove('hgt.rdr.vrt')
os.remove('hgt.rdr.xml')
os.remove('los.rdr')
os.remove('los.rdr.vrt')
os.remove('los.rdr.xml')
os.remove('wbd.rdr')
os.remove('wbd.rdr.vrt')
os.remove('wbd.rdr.xml')
#put the results on a grid with a specified interval
interval = 0.2
axisRatio = int(np.sqrt(landRatio)/interval)*interval + interval
if axisRatio > 1:
axisRatio = 1
numberOfOffsetsRange = int(numberOfOffsetsRange/axisRatio)
numberOfOffsetsAzimuth = int(numberOfOffsetsAzimuth/axisRatio)
else:
catalog.addItem('warning message', 'no water mask used to determine number of matching points. frame {} swath {}'.format(frameNumber, swathNumber), 'runSlcOffset')
#user's settings
if self.numberRangeOffsets != None:
numberOfOffsetsRange = self.numberRangeOffsets[i][j]
if self.numberAzimuthOffsets != None:
numberOfOffsetsAzimuth = self.numberAzimuthOffsets[i][j]
catalog.addItem('number of offsets range frame {} swath {}'.format(frameNumber, swathNumber), numberOfOffsetsRange, 'runSlcOffset')
catalog.addItem('number of offsets azimuth frame {} swath {}'.format(frameNumber, swathNumber), numberOfOffsetsAzimuth, 'runSlcOffset')
##########################################
#2. match using ampcor
##########################################
ampcor = Ampcor(name='insarapp_slcs_ampcor')
ampcor.configure()
mSLC = isceobj.createSlcImage()
mSLC.load(self._insar.referenceSlc+'.xml')
mSLC.setAccessMode('read')
mSLC.createImage()
sSLC = isceobj.createSlcImage()
sSLC.load(self._insar.secondarySlc+'.xml')
sSLC.setAccessMode('read')
sSLC.createImage()
ampcor.setImageDataType1('complex')
ampcor.setImageDataType2('complex')
ampcor.setReferenceSlcImage(mSLC)
ampcor.setSecondarySlcImage(sSLC)
#MATCH REGION
#compute an offset at image center to use
rgoff, azoff = computeOffsetFromOrbit(referenceSwath, referenceTrack, secondarySwath, secondaryTrack,
referenceSwath.numberOfSamples * 0.5,
referenceSwath.numberOfLines * 0.5)
#it seems that we cannot use 0, haven't look into the problem
if rgoff == 0:
rgoff = 1
if azoff == 0:
azoff = 1
firstSample = 1
if rgoff < 0:
firstSample = int(35 - rgoff)
firstLine = 1
if azoff < 0:
firstLine = int(35 - azoff)
ampcor.setAcrossGrossOffset(rgoff)
ampcor.setDownGrossOffset(azoff)
ampcor.setFirstSampleAcross(firstSample)
ampcor.setLastSampleAcross(mSLC.width)
ampcor.setNumberLocationAcross(numberOfOffsetsRange)
ampcor.setFirstSampleDown(firstLine)
ampcor.setLastSampleDown(mSLC.length)
ampcor.setNumberLocationDown(numberOfOffsetsAzimuth)
#MATCH PARAMETERS
#full-aperture mode
if (self._insar.modeCombination == 21) or \
(self._insar.modeCombination == 22) or \
(self._insar.modeCombination == 31) or \
(self._insar.modeCombination == 32):
ampcor.setWindowSizeWidth(64)
ampcor.setWindowSizeHeight(512)
#note this is the half width/length of search area, number of resulting correlation samples: 32*2+1
ampcor.setSearchWindowSizeWidth(32)
ampcor.setSearchWindowSizeHeight(32)
#triggering full-aperture mode matching
ampcor.setWinsizeFilt(8)
ampcor.setOversamplingFactorFilt(64)
#regular mode
else:
ampcor.setWindowSizeWidth(64)
ampcor.setWindowSizeHeight(64)
ampcor.setSearchWindowSizeWidth(32)
ampcor.setSearchWindowSizeHeight(32)
#REST OF THE STUFF
ampcor.setAcrossLooks(1)
ampcor.setDownLooks(1)
ampcor.setOversamplingFactor(64)
ampcor.setZoomWindowSize(16)
#1. The following not set
#Matching Scale for Sample/Line Directions (-) = 1. 1.
#should add the following in Ampcor.py?
#if not set, in this case, Ampcor.py'value is also 1. 1.
#ampcor.setScaleFactorX(1.)
#ampcor.setScaleFactorY(1.)
#MATCH THRESHOLDS AND DEBUG DATA
#2. The following not set
#in roi_pac the value is set to 0 1
#in isce the value is set to 0.001 1000.0
#SNR and Covariance Thresholds (-) = {s1} {s2}
#should add the following in Ampcor?
#THIS SHOULD BE THE ONLY THING THAT IS DIFFERENT FROM THAT OF ROI_PAC
#ampcor.setThresholdSNR(0)
#ampcor.setThresholdCov(1)
ampcor.setDebugFlag(False)
ampcor.setDisplayFlag(False)
#in summary, only two things not set which are indicated by 'The following not set' above.
#run ampcor
ampcor.ampcor()
offsets = ampcor.getOffsetField()
ampcorOffsetFile = 'ampcor.off'
writeOffset(offsets, ampcorOffsetFile)
#finalize image, and re-create it
#otherwise the file pointer is still at the end of the image
mSLC.finalizeImage()
sSLC.finalizeImage()
##########################################
#3. cull offsets
##########################################
refinedOffsets = cullOffsets(offsets)
if refinedOffsets == None:
print('******************************************************************')
print('WARNING: There are not enough offsets left, so we are forced to')
print(' use offset without culling. frame {}, swath {}'.format(frameNumber, swathNumber))
print('******************************************************************')
catalog.addItem('warning message', 'not enough offsets left, use offset without culling. frame {} swath {}'.format(frameNumber, swathNumber), 'runSlcOffset')
refinedOffsets = offsets
cullOffsetFile = 'cull.off'
writeOffset(refinedOffsets, cullOffsetFile)
os.chdir('../')
os.chdir('../')
catalog.printToLog(logger, "runSlcOffset")
self._insar.procDoc.addAllFromCatalog(catalog)
def runRdrDemOffset(self):
'''estimate between radar image and dem
'''
catalog = isceobj.Catalog.createCatalog(self._insar.procDoc.name)
self.updateParamemetersFromUser()
referenceTrack = self._insar.loadTrack(reference=True)
demFile = os.path.abspath(self._insar.dem)
insarDir = 'insar'
os.makedirs(insarDir, exist_ok=True)
os.chdir(insarDir)
rdrDemDir = 'rdr_dem_offset'
os.makedirs(rdrDemDir, exist_ok=True)
os.chdir(rdrDemDir)
##################################################################################################
#compute dem pixel size
demImage = isceobj.createDemImage()
demImage.load(demFile + '.xml')
#DEM pixel size in meters (appoximate value)
demDeltaLon = abs(demImage.getDeltaLongitude()) / 0.0002777777777777778 * 30.0
demDeltaLat = abs(demImage.getDeltaLatitude()) / 0.0002777777777777778 * 30.0
#number of looks to take in range
if self._insar.numberRangeLooksSim == None:
if self._insar.numberRangeLooks1 * referenceTrack.rangePixelSize > demDeltaLon:
self._insar.numberRangeLooksSim = 1
else:
self._insar.numberRangeLooksSim = int(demDeltaLon / (self._insar.numberRangeLooks1 * referenceTrack.rangePixelSize) + 0.5)
#number of looks to take in azimuth
if self._insar.numberAzimuthLooksSim == None:
if self._insar.numberAzimuthLooks1 * referenceTrack.azimuthPixelSize > demDeltaLat:
self._insar.numberAzimuthLooksSim = 1
else:
self._insar.numberAzimuthLooksSim = int(demDeltaLat / (self._insar.numberAzimuthLooks1 * referenceTrack.azimuthPixelSize) + 0.5)
#simulate a radar image using dem
simulateRadar(os.path.join('../', self._insar.height), self._insar.sim, scale=3.0, offset=100.0)
sim = isceobj.createImage()
sim.load(self._insar.sim+'.xml')
#take looks
if (self._insar.numberRangeLooksSim == 1) and (self._insar.numberAzimuthLooksSim == 1):
simLookFile = self._insar.sim
ampLookFile = 'amp_{}rlks_{}alks.float'.format(self._insar.numberRangeLooksSim*self._insar.numberRangeLooks1,
self._insar.numberAzimuthLooksSim*self._insar.numberAzimuthLooks1)
cmd = "imageMath.py -e='sqrt(a_0*a_0+a_1*a_1)' --a={} -o {} -t float".format(os.path.join('../', self._insar.amplitude), ampLookFile)
runCmd(cmd)
else:
simLookFile = 'sim_{}rlks_{}alks.float'.format(self._insar.numberRangeLooksSim*self._insar.numberRangeLooks1,
self._insar.numberAzimuthLooksSim*self._insar.numberAzimuthLooks1)
ampLookFile = 'amp_{}rlks_{}alks.float'.format(self._insar.numberRangeLooksSim*self._insar.numberRangeLooks1,
self._insar.numberAzimuthLooksSim*self._insar.numberAzimuthLooks1)
ampTmpFile = 'amp_tmp.float'
look(self._insar.sim, simLookFile, sim.width, self._insar.numberRangeLooksSim, self._insar.numberAzimuthLooksSim, 2, 0, 1)
look(os.path.join('../', self._insar.amplitude), ampTmpFile, sim.width, self._insar.numberRangeLooksSim, self._insar.numberAzimuthLooksSim, 4, 1, 1)
width = int(sim.width/self._insar.numberRangeLooksSim)
length = int(sim.length/self._insar.numberAzimuthLooksSim)
create_xml(simLookFile, width, length, 'float')
create_xml(ampTmpFile, width, length, 'amp')
cmd = "imageMath.py -e='sqrt(a_0*a_0+a_1*a_1)' --a={} -o {} -t float".format(ampTmpFile, ampLookFile)
runCmd(cmd)
os.remove(ampTmpFile)
os.remove(ampTmpFile+'.vrt')
os.remove(ampTmpFile+'.xml')
#initial number of offsets to use
numberOfOffsets = 800
#compute land ratio to further determine the number of offsets to use
wbd=np.memmap(os.path.join('../', self._insar.wbdOut), dtype='byte', mode='r', shape=(sim.length, sim.width))
landRatio = np.sum(wbd[0:sim.length:10, 0:sim.width:10]!=-1) / int(sim.length/10) / int(sim.width/10)
del wbd
if (landRatio <= 0.00125):
print('\n\nWARNING: land area too small for estimating offsets between radar and dem')
print('do not estimate offsets between radar and dem\n\n')
self._insar.radarDemAffineTransform = [1.0, 0.0, 0.0, 1.0, 0.0, 0.0]
catalog.addItem('warning message', 'land area too small for estimating offsets between radar and dem', 'runRdrDemOffset')
os.chdir('../../')
catalog.printToLog(logger, "runRdrDemOffset")
self._insar.procDoc.addAllFromCatalog(catalog)
return
#total number of offsets to use
numberOfOffsets /= landRatio
#allocate number of offsets in range/azimuth according to image width/length
width = int(sim.width/self._insar.numberRangeLooksSim)
length = int(sim.length/self._insar.numberAzimuthLooksSim)
#number of offsets to use in range/azimuth
numberOfOffsetsRange = int(np.sqrt(numberOfOffsets * width / length))
numberOfOffsetsAzimuth = int(length / width * np.sqrt(numberOfOffsets * width / length))
#this should be better?
numberOfOffsetsRange = int(np.sqrt(numberOfOffsets))
numberOfOffsetsAzimuth = int(np.sqrt(numberOfOffsets))
if numberOfOffsetsRange > int(width/2):
numberOfOffsetsRange = int(width/2)
if numberOfOffsetsAzimuth > int(length/2):
numberOfOffsetsAzimuth = int(length/2)
if numberOfOffsetsRange < 10:
numberOfOffsetsRange = 10
if numberOfOffsetsAzimuth < 10:
numberOfOffsetsAzimuth = 10
catalog.addItem('number of range offsets', '{}'.format(numberOfOffsetsRange), 'runRdrDemOffset')
catalog.addItem('number of azimuth offsets', '{}'.format(numberOfOffsetsAzimuth), 'runRdrDemOffset')
#matching
ampcor = Ampcor(name='insarapp_slcs_ampcor')
ampcor.configure()
mMag = isceobj.createImage()
mMag.load(ampLookFile+'.xml')
mMag.setAccessMode('read')
mMag.createImage()
sMag = isceobj.createImage()
sMag.load(simLookFile+'.xml')
sMag.setAccessMode('read')
sMag.createImage()
ampcor.setImageDataType1('real')
ampcor.setImageDataType2('real')
ampcor.setReferenceSlcImage(mMag)
ampcor.setSecondarySlcImage(sMag)
#MATCH REGION
rgoff = 0
azoff = 0
#it seems that we cannot use 0, haven't look into the problem
if rgoff == 0:
rgoff = 1
if azoff == 0:
azoff = 1
firstSample = 1
if rgoff < 0:
firstSample = int(35 - rgoff)
firstLine = 1
if azoff < 0:
firstLine = int(35 - azoff)
ampcor.setAcrossGrossOffset(rgoff)
ampcor.setDownGrossOffset(azoff)
ampcor.setFirstSampleAcross(firstSample)
ampcor.setLastSampleAcross(width)
ampcor.setNumberLocationAcross(numberOfOffsetsRange)
ampcor.setFirstSampleDown(firstLine)
ampcor.setLastSampleDown(length)
ampcor.setNumberLocationDown(numberOfOffsetsAzimuth)
#MATCH PARAMETERS
ampcor.setWindowSizeWidth(64)
ampcor.setWindowSizeHeight(64)
#note this is the half width/length of search area, so number of resulting correlation samples: 8*2+1
ampcor.setSearchWindowSizeWidth(16)
ampcor.setSearchWindowSizeHeight(16)
#REST OF THE STUFF
ampcor.setAcrossLooks(1)
ampcor.setDownLooks(1)
ampcor.setOversamplingFactor(64)
ampcor.setZoomWindowSize(16)
#1. The following not set
#Matching Scale for Sample/Line Directions (-) = 1. 1.
#should add the following in Ampcor.py?
#if not set, in this case, Ampcor.py'value is also 1. 1.
#ampcor.setScaleFactorX(1.)
#ampcor.setScaleFactorY(1.)
#MATCH THRESHOLDS AND DEBUG DATA
#2. The following not set
#in roi_pac the value is set to 0 1
#in isce the value is set to 0.001 1000.0
#SNR and Covariance Thresholds (-) = {s1} {s2}
#should add the following in Ampcor?
#THIS SHOULD BE THE ONLY THING THAT IS DIFFERENT FROM THAT OF ROI_PAC
#ampcor.setThresholdSNR(0)
#ampcor.setThresholdCov(1)
ampcor.setDebugFlag(False)
ampcor.setDisplayFlag(False)
#in summary, only two things not set which are indicated by 'The following not set' above.
#run ampcor
ampcor.ampcor()
offsets = ampcor.getOffsetField()
ampcorOffsetFile = 'ampcor.off'
cullOffsetFile = 'cull.off'
affineTransformFile = 'affine_transform.txt'
writeOffset(offsets, ampcorOffsetFile)
#finalize image, and re-create it
#otherwise the file pointer is still at the end of the image
mMag.finalizeImage()
sMag.finalizeImage()
# #cull offsets
# import io
# from contextlib import redirect_stdout
# f = io.StringIO()
# with redirect_stdout(f):
# fitoff(ampcorOffsetFile, cullOffsetFile, 1.5, .5, 50)
# s = f.getvalue()
# #print(s)
# with open(affineTransformFile, 'w') as f:
# f.write(s)
#cull offsets
import subprocess
proc = subprocess.Popen(["python3", "-c", "import isce; from contrib.alos2proc_f.alos2proc_f import fitoff; fitoff('ampcor.off', 'cull.off', 1.5, .5, 50)"], stdout=subprocess.PIPE)
out = proc.communicate()[0]
with open(affineTransformFile, 'w') as f:
f.write(out.decode('utf-8'))
#check number of offsets left
with open(cullOffsetFile, 'r') as f:
numCullOffsets = sum(1 for linex in f)
if numCullOffsets < 50:
print('\n\nWARNING: too few points left after culling, {} left'.format(numCullOffsets))
print('do not estimate offsets between radar and dem\n\n')
self._insar.radarDemAffineTransform = [1.0, 0.0, 0.0, 1.0, 0.0, 0.0]
catalog.addItem('warning message', 'too few points left after culling, {} left'.format(numCullOffsets), 'runRdrDemOffset')
os.chdir('../../')
catalog.printToLog(logger, "runRdrDemOffset")
self._insar.procDoc.addAllFromCatalog(catalog)
return
#read affine transform parameters
with open(affineTransformFile) as f:
lines = f.readlines()
i = 0
for linex in lines:
if 'Affine Matrix ' in linex:
m11 = float(lines[i + 2].split()[0])
m12 = float(lines[i + 2].split()[1])
m21 = float(lines[i + 3].split()[0])
m22 = float(lines[i + 3].split()[1])
t1 = float(lines[i + 7].split()[0])
t2 = float(lines[i + 7].split()[1])
break
i += 1
self._insar.radarDemAffineTransform = [m11, m12, m21, m22, t1, t2]
##################################################################################################
os.chdir('../../')
catalog.printToLog(logger, "runRdrDemOffset")
self._insar.procDoc.addAllFromCatalog(catalog)
