def island_check(bm):
selFaces = bmesh_extras.get_selected_faces(bm)
if len(selFaces):
checkFaces = bmesh_extras.get_selected_faces(bm)
biggestLen = False
biggestCon = False
# For each face check how many are connected to it
for f in selFaces:
if len(checkFaces) and f in checkFaces:
conFaces, checkFaces = get_connected([], checkFaces, f)
cnt = len(conFaces)
if cnt > biggestLen or biggestLen is False:
biggestLen = cnt
biggestCon = conFaces
# Deslect all selected faces that arent part of the biggest island.
if not biggestLen is False:
for f in bm.faces:
if f.select and not f in biggestCon:
f.select_set(False)
return bm
def island_check(bm): selFaces = bmesh_extras.get_selected_faces(bm) if len(selFaces): checkFaces = bmesh_extras.get_selected_faces(bm) biggestLen = False biggestCon = False # For each face check how many are connected to it for f in selFaces: if len(checkFaces) and f in checkFaces: conFaces, checkFaces = get_connected([], checkFaces, f) cnt = len(conFaces) if cnt > biggestLen or biggestLen is False: biggestLen = cnt biggestCon = conFaces # Deslect all selected faces that arent part of the biggest island. if not biggestLen is False: for f in bm.faces: if f.select and not f in biggestCon: f.select_set(False) return bm
def inner(bm, invert=False):
selFaces = bmesh_extras.get_selected_faces(bm)
# no need to continue if there are no selected faces
if len(selFaces):
outerFaces = []
outerVerts = []
while len(outerFaces) < len(selFaces):
# Deselect the outer faces if there are any
if len(outerFaces):
for f in outerFaces:
f.select_set(False)
# Reset the list
outerFaces = []
outerVerts = []
# Select the faces connected to unselected faces
for f1 in selFaces:
found = False
for v in f1.verts:
# If we know this vert is on the outside... no need to loop through the linked faces
if v.index in outerVerts:
outerFaces.append(f1)
break
# Loop through the connected faces to see if they're unselected
for f2 in v.link_faces:
if not f2.select:
outerVerts.append(v.index)
outerFaces.append(f1)
found = True
break
if found:
break
# Invert the selection!
if invert:
for f in selFaces:
if f.select:
f.select_set(False)
else:
f.select_set(True)
return bm
def inner(bm, invert=False): selFaces = bmesh_extras.get_selected_faces(bm) # no need to continue if there are no selected faces if len(selFaces): outerFaces = [] outerVerts = [] while len(outerFaces) < len(selFaces): # Deselect the outer faces if there are any if len(outerFaces): for f in outerFaces: f.select_set(False) # Reset the list outerFaces = [] outerVerts = [] # Select the faces connected to unselected faces for f1 in selFaces: found = False for v in f1.verts: # If we know this vert is on the outside... no need to loop through the linked faces if v.index in outerVerts: outerFaces.append(f1) break # Loop through the connected faces to see if they're unselected for f2 in v.link_faces: if not f2.select: outerVerts.append(v.index) outerFaces.append(f1) found = True break if found: break # Invert the selection! if invert: for f in selFaces: if f.select: f.select_set(False) else: f.select_set(True) return bm
def outer(bm, invert=False):
#print('x outer start')
selFaces = bmesh_extras.get_selected_faces(bm)
selLen = len(selFaces)
# no use continueing if there's no selection
if not selLen:
return bm
outerFaces = []
outerVerts = []
# Find faces connected to unselected faces
for f1 in selFaces:
out = False
for v in f1.verts:
# No need to loop through connected faces if this vert is on the outside
if v.index in outerVerts:
outerFaces.append(f1)
break
# Loop through the faces connected to this vert
for f2 in v.link_faces:
if not f2.select:
outerFaces.append(f1)
outerVerts.append(v.index)
out = True
break
if out:
break
# Unselect those that don't need to be kept
if len(outerFaces) < selLen:
for f in selFaces:
if invert and f in outerFaces:
f.select_set(False)
elif not invert and not f in outerFaces:
f.select_set(False)
#print('y outer end')
return bm
def outer(bm, invert=False):
#print('x outer start')
selFaces = bmesh_extras.get_selected_faces(bm)
selLen = len(selFaces)
# no use continueing if there's no selection
if not selLen:
return bm
outerFaces = []
outerVerts = []
# Find faces connected to unselected faces
for f1 in selFaces:
out = False
for v in f1.verts:
# No need to loop through connected faces if this vert is on the outside
if v.index in outerVerts:
outerFaces.append(f1)
break
# Loop through the faces connected to this vert
for f2 in v.link_faces:
if not f2.select:
outerFaces.append(f1)
outerVerts.append(v.index)
out = True
break
if out:
break
# Unselect those that don't need to be kept
if len(outerFaces) < selLen:
for f in selFaces:
if invert and f in outerFaces:
f.select_set(False)
elif not invert and not f in outerFaces:
f.select_set(False)
#print('y outer end')
return bm
def cast(bme=None, corners=0, falloff_scale=1.0, falloff_shape='STR',corner_group=None,redraw=False):
if not bme:
bm = bmesh_extras.get_bmesh()
else:
bm = bme
print(corners, falloff_scale, falloff_shape)
# Get a heap of lists to work with later!
selFaces = bmesh_extras.get_selected_faces(bm)
selVerts = bmesh_extras.get_selected_verts(bm)
outVerts = bmesh_extras.get_outer_verts(selFaces)
outEdges = bmesh_extras.get_outer_edges(selFaces)
cent = bmesh_extras.get_vert_center(selVerts )
normal = bmesh_extras.get_normal(selFaces)
inVerts = []
if len(outVerts):
# Let's quickly make a list of inner verts
for v in selVerts:
if not v in outVerts:
inVerts.append(v)
# make a quaternion and a matrix representing this "plane"
quat = normal.to_track_quat('-Z', 'Y')
mat = quat.to_matrix()
# Put all the verts in the plane...
# And.. find out for each vert how far it is along the normal
# Ang get the average distance from the center point
midDist = 0.0
for v in selVerts:
relPos = (v.co - cent)
relDot = normal.dot(relPos)
v.co += (normal * (-relDot))
# If this is an outerVert... then we keep track of it's distance from the center
if v in outVerts:
midDist += relPos.length
# The medium distance from the center point
midDist /= len(outVerts)
# now lets put them all the right distance from the center
top = False
topVert = False
for i,v in enumerate(outVerts):
relPos = v.co - cent
relPos = relPos.normalized() * midDist
v.co = relPos + cent
# Find the top vert for nice alignment of the shape (start the steploop here)
if top is False or v.co[2] > top:
top = v.co[2]
topVert = i
# As a final step... we want them to be rotated neatly around the center...
step = math.radians(360) / (len(outEdges))
# Now that we found the top vert we can start looping through to put them in the right position
loopVerts = [outVerts[topVert]]
outEdges, loopVerts = loop_step(outVerts[topVert],loopVerts,step,outEdges,cent,False)
# Set corner group weight to 0.0 because the shape is a circle (will be reset to 1.0 later for the actual corners)
if corner_group:
bm, group_index = add_to_group(bme=bm,verts=outVerts, newGroup=False, groupName=corner_group, weight=0.0)
if corners:
# Initiate a list of all corner verts so we can set the weight accordingly later (best done in one move)
cornerVerts = []
c = round((360.0 / corners),2)
a = (180.0 - c) * 0.5
stepLen = math.ceil(len(outVerts) / corners)
#print('stepLen', stepLen)
aLine = False
currentX = 0.0
vec = falloff_scale
factor = 1.0
curve = falloff_curve.curve(falloff_shape, 'mult')
loopCnt = len(loopVerts)
cornerCnt = math.floor(loopCnt / corners)
#print('\n',loopCnt,cornerCnt)
for i, v in enumerate(loopVerts):
#if(i>9):
# return
stepPos = i % stepLen
#print(i,'stepPos',stepPos)
# Get a normalized version of the current relative position
line = mathutils.Vector(v.co - cent).normalized()
# Get the starting line as a reference (is also a corner
if not aLine:
aLine = line
currentX = 0.0
factor = 1.0
#if corner_group: corner_group.add([v.index], 1.0, 'REPLACE')
if corner_group:
cornerVerts.append(v)
else:
# Find the angle from the current starting line
cAng = round(math.degrees(aLine.angle(line)),2)
#print('ang',cAng,c,(cAng >= c))
# If the angle is bigger than a step, we make this the new start
if cAng >= c:
#print('found corner')
#if corner_group: corner_group.add([v.index], 1.0, 'REPLACE')
if corner_group:
cornerVerts.append(v)
# Make sure the angle is correct!
line = misc.rotate_vector_to_vector(line, aLine, math.radians(c))
v.co = (line * midDist) + cent
aLine = line
currentX = 0.0
factor = 1.0
# These should all be midpoints along the line!
# make sure we don't do the last one... because it's the first one!
else:
# Remove non corner items from the corner group
#if corner_group: corner_group.remove([v.index])
# Only if we have to scale and the line isn't straight!
if falloff_scale != 1.0 and falloff_shape != 'STR':
# Find out how far we are from the start as a factor (fraction of one?)
angFac = cAng / c
newX = angFac
# Create a nice curve object to represent the falloff
curve.update(1.0, 0.0, vec, currentX, newX)
fac = abs(curve.currentVal)
factor *= fac
currentX = newX
# Find the corner of the new triangle
b = 180 - (a+cAng)
# find the distance from the midpoint
A = math.sin(math.radians(a)) / (math.sin(math.radians(b))/midDist)
bLine = line * A
bLine *= factor
v.co = bLine + cent
if redraw:
scene_update.go(False, 'RED')
if len(cornerVerts):
bm, group_index = add_to_group(bme=bm,verts=cornerVerts, newGroup=False, groupName=corner_group, weight=1.0)
# I want to make sure these verts are inside the loop!
# So we move all verts halfway towards the center before smoothing (neat results in entoforms)
for v in inVerts:
relPos = cent - v.co
v.co += (relPos * 0.5)
#for i in range(100):
# SMOOTH THE VERTS MAN!!!
bmesh_extras.smooth_verts(verts=inVerts,loops=10)
#bmesh.ops.smooth_vert(bm, verts=inVerts,use_axis_x=True, use_axis_y=True, use_axis_z=True)
if not bme:
bmesh_extras.put_bmesh(bm)
else:
return bm
