def getRoofSineCurve( startInput, endInput, minValue, maxValue ):
animCurve = cmds.createNode( 'animCurveUU' )
cmds.setKeyframe( f= startInput, v=minValue )
cmds.setKeyframe( f= (startInput+endInput)/2.0, v=maxValue )
cmds.setKeyframe( f= endInput, v=minValue )
cmds.selectKey( animCurve )
cmds.setInfinity( poi='cycle', pri='cycle' )
return animCurve
def create_fk_setup(self):
"""Creates the FK setup."""
cmds.orientConstraint(self.controls['fan'], self.result_jnts[0], mo=True)
mdl = cmds.shadingNode('multDoubleLinear', asUtility=True)
mdl = cmds.rename(mdl, '%s_%s_MDL' % (self.side, self.modulename))
if self.side == 'R':
cmds.expression(s='%s.input1 = time * (-1);' % mdl, o=mdl, ae=1, uc='all')
else:
cmds.expression(s='%s.input1 = time;' % mdl, o=mdl, ae=1, uc='all')
# END if
cmds.connectAttr('%s.speed' % self.controls['fan'], '%s.input2' % mdl, f=True)
cmds.setDrivenKeyframe('%s.rotate%s' % (self.controls['offset'], self._up_axis), cd='%s.output' % mdl, dv=0, v=0)
cmds.setDrivenKeyframe('%s.rotate%s' % (self.controls['offset'], self._up_axis), cd='%s.output' % mdl, dv=1, v=1)
cmds.keyTangent('%s_rotate%s' % (self.controls['offset'], self._up_axis), itt='linear', ott='linear', f=(0, 1))
cmds.selectKey('%s_rotate%s' % (self.controls['offset'], self._up_axis), add=True, k=True, f=(0, 1))
cmds.setInfinity(pri='cycleRelative', poi='cycleRelative')
def pre_post_Linear():
#Create a alarm message!#
global global_info
Objects = maya.ls(type=["transform", "camera"], selection=True)
if Objects == []:
maya.text(
global_info,
edit=True,
label="Please select at least one camera before pre_post_linear!")
else:
for i in Objects:
print i
maya.setAttr(i + ".tx", lock=False)
maya.setAttr(i + ".ty", lock=False)
maya.setAttr(i + ".tz", lock=False)
maya.setAttr(i + ".rx", lock=False)
maya.setAttr(i + ".ry", lock=False)
maya.setAttr(i + ".rz", lock=False)
maya.setAttr(i + ".sx", lock=False)
maya.setAttr(i + ".sy", lock=False)
maya.setAttr(i + ".sz", lock=False)
maya.keyTangent(inTangentType='spline', outTangentType='spline')
maya.setInfinity(poi='linear', pri='linear')
maya.setAttr(i + ".tx", lock=True)
maya.setAttr(i + ".ty", lock=True)
maya.setAttr(i + ".tz", lock=True)
maya.setAttr(i + ".rx", lock=True)
maya.setAttr(i + ".ry", lock=True)
maya.setAttr(i + ".rz", lock=True)
maya.setAttr(i + ".sx", lock=True)
maya.setAttr(i + ".sy", lock=True)
maya.setAttr(i + ".sz", lock=True)
def loopKeyFrameC(obj,startFrame,endFrame,offsetFrame):
print "loopKeyFrameC"#,obj,startFrame,endFrame,offsetFrame
keyAbleAttList=["translateX","translateY","translateZ","rotateX","rotateY","rotateZ","scaleX","scaleY","scaleZ","slot_alpha","slot_red","slot_green","slot_blue"] #["translateX","translateY","translateZ","rotateX","rotateY","rotateZ","scaleX","scaleY","scaleZ"]
SOframe = float(startFrame +offsetFrame)
EOframe = float(endFrame + offsetFrame)
#cmds.keyframe(obj,at="translateX",q=True)
for attr in keyAbleAttList:
try:
keyframeList = cmds.keyframe(obj,at=attr,q=True)
keyframeListCount = len(keyframeList)
except:
keyframeListCount = 0
print attr,obj,SOframe,EOframe,keyframeList
if keyframeListCount > 0:
if startFrame < keyframeList[0]:
# print "startFrame"
firstFrame = float(keyframeList[0])
startFrameValue = cmds.getAttr('%s.%s'%(obj,attr),t= firstFrame)
cmds.setKeyframe(t=(startFrame,startFrame),e=True,at=attr,v=startFrameValue)
if endFrame > keyframeList[-1]:
# print "endFrame"
lastFrame = float(keyframeList[-1])
endFrameValue = cmds.getAttr('%s.%s'%(obj,attr),t = lastFrame)
cmds.setKeyframe(t=(endFrame,endFrame),e=True,at=attr,v=endFrameValue)
cmds.cutKey(obj,at=attr,t= (startFrame,endFrame))
cmds.pasteKey(obj,at=attr , t= (SOframe,))
newKeyframeList = cmds.keyframe(obj,at=attr,q=True)
newLastFrame = newKeyframeList[-1]
# print "newKeyframeList,newLastFrame",newKeyframeList,newLastFrame
cmds.setInfinity( obj,pri='cycle', poi='cycle' ,at=attr)
cmds.keyTangent(obj,t=(newLastFrame,newLastFrame),ott ="step",e=True)
def create_moon():
"""
create the moon
"""
n = 'moon'
moon_time_period = 0.0748
cmds.sphere(name=n, axis=[0, 1.0, 0], radius=moon_radius * 0.025)
cmds.setAttr(n + 'Shape.castsShadows', 0)
cmds.setAttr(n + 'Shape.receiveShadows', 0)
cmds.select(n)
create_texture(n)
cmds.circle(radius=0.25, normalY=1, normalZ=0, name=n + '_orbit')
cmds.parent('moon_orbit', 'earth')
cmds.select(n, n + '_orbit')
cmds.pathAnimation(name=n + '_path',
fractionMode=True,
follow=True,
followAxis='x',
upAxis='y',
worldUpType='vector',
worldUpVector=[0, 1, 0],
inverseUp=False,
bank=False,
startTimeU=1,
endTimeU=int(moon_time_period * 10000 / time_period[3] /
2))
cmds.selectKey(clear=True)
cmds.selectKey(n + '_path',
keyframe=True,
time=(1,
int(moon_time_period * 10000 / time_period[3] / 2)))
cmds.keyTangent(inTangentType='linear', outTangentType='linear')
cmds.setInfinity(postInfinite='cycle')
animate_rotation('moon',
int(moon_time_period * 10000 / time_period[3] / 2))
def pre_post_Linear():
#Create a alarm message!#
alarmWindow = maya.window(title="Message")
maya.columnLayout(adjustableColumn=False)
maya.text(label="Please select at least one camera!")
Objects = maya.ls(type=["transform", "camera"], selection=True)
if Objects == []:
maya.showWindow(alarmWindow)
else:
for i in Objects:
print i
maya.setAttr(i + ".tx", lock=False)
maya.setAttr(i + ".ty", lock=False)
maya.setAttr(i + ".tz", lock=False)
maya.setAttr(i + ".rx", lock=False)
maya.setAttr(i + ".ry", lock=False)
maya.setAttr(i + ".rz", lock=False)
maya.setAttr(i + ".sx", lock=False)
maya.setAttr(i + ".sy", lock=False)
maya.setAttr(i + ".sz", lock=False)
maya.keyTangent(inTangentType='spline', outTangentType='spline')
maya.setInfinity(poi='linear', pri='linear')
maya.setAttr(i + ".tx", lock=True)
maya.setAttr(i + ".ty", lock=True)
maya.setAttr(i + ".tz", lock=True)
maya.setAttr(i + ".rx", lock=True)
maya.setAttr(i + ".ry", lock=True)
maya.setAttr(i + ".rz", lock=True)
maya.setAttr(i + ".sx", lock=True)
maya.setAttr(i + ".sy", lock=True)
maya.setAttr(i + ".sz", lock=True)
def Bake():
#########################################################################-------------> setting loop but not for legs <------------------#########################################################################
global spineCount, fromFrameNum, toFrameNum, loopADD, fpsDesired, stepCheck, stepNum
global pelvis, spine, neck1, neck2, head, shoulder, upArm, lowArm, wrist
mc.currentUnit(t = str(fpsDesired) + 'fps')
mc.select(pelvis, neck1, head, 'CTRL_L'+shoulder, 'CTRL_FK_L'+upArm, 'CTRL_FK_L'+lowArm, 'CTRL_FK_L'+wrist, 'CTRL_R'+shoulder, 'CTRL_FK_R'+upArm, 'CTRL_FK_R'+lowArm, 'CTRL_FK_R'+wrist, 'CTRL_L'+ikFoot, 'CTRL_R'+ikFoot, 'CTRL_L'+ikKnee, 'CTRL_R'+ikKnee, 'CTRL_L'+fRoll, 'CTRL_R'+fRoll, 'CTRL_L'+tRoll, 'CTRL_R'+tRoll)
for i in range(spineCount):
mc.select(spine + str(i+1), add = True)
if(loopADD):
mc.setInfinity(poi = 'cycle')
if(stepCheck):
toFrameNum = fpsDesired / 2 * stepNum + fromFrameNum
print toFrameNum
mc.playbackOptions(e = True, min = fromFrameNum)
mc.playbackOptions(e = True, max = toFrameNum)
mc.bakeResults(simulation = True, t = (fromFrameNum,toFrameNum), attribute = 'rotate', disableImplicitControl = True, preserveOutsideKeys = True, removeBakedAttributeFromLayer = False, removeBakedAnimFromLayer = False, bakeOnOverrideLayer = False, minimizeRotation = True)
mc.select(deselect = True)
mc.select(pelvis)
mc.bakeResults(simulation = True, t = (fromFrameNum,toFrameNum), attribute = 'translate', disableImplicitControl = True, preserveOutsideKeys = True, removeBakedAttributeFromLayer = False, removeBakedAnimFromLayer = False, bakeOnOverrideLayer = False, minimizeRotation = True)
mc.confirmDialog(title = 'Done!', message = 'Animation successfully generated!')
def apply(self, attr):
obj = attr.node()
obj_mel = obj.__melobject__()
attr_longName = attr.longName()
attrMel = attr.__melobject__()
if len(self.times) > 0:
for time, value in zip(self.times, self.values):
cmds.setKeyframe(obj_mel, time=time, attribute=attr_longName, value=value,
breakdown=False, # TODO: Approve
hierarchy='none', # TODO: Approve
controlPoints=False, # TODO: Approve
shape=False) # TODO: Approve
# set tangents
cmds.keyTangent(attrMel, edit=True, wt=int(self.weightedTangent)) # todo: approve int cast
for time, inAngle, outAngle, inWeight, outWeight, inTangentType, outTangentType, lock in zip(
self.times, self.inAngles, self.outAngles, self.inWeights, self.outWeights, self.inTangentTypes, self.outTangentTypes, self.locks):
fn_keyTangent = functools.partial(cmds.keyTangent, attrMel, edit=True, time=(time, time))
fn_keyTangent(inAngle=inAngle,
outAngle=outAngle,
inWeight=inWeight,
outWeight=outWeight)
fn_keyTangent(inTangentType=inTangentType,outTangentType=outTangentType)
fn_keyTangent(lock=lock) # TODO: Optimise
# set infinity
if self.preInfinity != "constant":
cmds.setInfinity(obj, attribute=attr_longName, preInfinity=self.preInfinity)
if self.postInfinity != "constant":
cmds.setInfinity(obj, attribute=attr_longName, postInfinity=self.postInfinity)
else:
attr.set(self.value)
def motionPath(itemList, curvePath, upObject, frontAxis, invertFront, upAxis,
invertUp, cycleAttributeName):
attributeList = [cycleAttributeName, 'frontTwist', 'upTwist', 'sideTwist']
for attr in attributeList:
if not ma.objExists(upObject + '.' + attr):
ma.addAttr(upObject, ln=attr, at='double')
ma.setAttr(upObject + '.' + attr, e=1, k=1, cb=0)
#calculate current sceneUnitMultiplier
sceneUnitDict = {
'cm': 1.0,
'mm': 10.0,
'm': 0.01,
'km': 9.999969839999708e-6,
'in': 0.393701,
'ft': 0.0328083,
'yd': 0.0109361,
'mi': 6.213693181818e-6
}
sceneUnitMultiplier = sceneUnitDict.get(ma.currentUnit(l=1, q=1))
offset = 1.0 / float(len(itemList)) if len(itemList) > 1 else 0.5
for i in range(0, len(itemList)):
#create motionpath
path = ma.pathAnimation(itemList[i],
c=curvePath,
n=itemList[i] + '_' + pathSuffix,
fm=1,
f=1,
fa=frontAxis,
ua=upAxis,
wut='object',
wuo=upObject,
iu=invertUp,
inverseFront=invertFront,
b=0)
ma.cutKey(path)
driven = path + '.' + 'uValue'
#setDrivenKeys
ma.setDrivenKeyframe(driven,
cd=upObject + '.' + attributeList[0],
dv=i * offset,
v=0,
itt='linear',
ott='linear')
ma.setDrivenKeyframe(driven,
cd=upObject + '.' + attributeList[0],
dv=(i * offset) + 1,
v=sceneUnitMultiplier,
itt='linear',
ott='linear')
ma.setInfinity(driven, pri='cycle', poi='cycle')
for attr in attributeList:
if attr != attributeList[0]:
ma.connectAttr(upObject + '.' + attr, path + '.' + attr)
#cleanup
convertDoubleLinear(path)
def returnSetDrivenKeyData(sdkAnimCurve):
'''
Returns setDrivenKey command from input sdkAnimCurve
returnSetDrivenKeyData('Rt_elbow_jnt_transRot_helper_offsetX')
'''
LOG.debug('Working on sdkCurve: %s' % sdkAnimCurve)
if mc.objExists(sdkAnimCurve):
LOG.debug('sdkCurve exists: %s' % sdkAnimCurve)
# Find driver and driven objects
driver = mc.listConnections('%s.input' % sdkAnimCurve,
scn=True,
source=True,
destination=False,
plugs=True)
driven = mc.listConnections('%s.output' % sdkAnimCurve,
source=False,
destination=True,
plugs=True)
# Find keyframes and values
driverKeys = mc.keyframe(sdkAnimCurve, q=True, floatChange=True)
drivenKeys = mc.keyframe(sdkAnimCurve, q=True, valueChange=True)
# Get animCurve tangent types
itt = mm.eval("keyTangent -query -itt %s ;" % sdkAnimCurve)
ott = mm.eval("keyTangent -query -ott %s ;" % sdkAnimCurve)
# Get animCurve pre/post infinity
mc.selectKey(sdkAnimCurve,
add=True,
k=True,
f=(driverKeys[0], driverKeys[0]))
pri = mc.setInfinity(q=True, pri=True)[0]
mc.selectKey(clear=True)
mc.selectKey(sdkAnimCurve,
add=True,
k=True,
f=(driverKeys[-1], driverKeys[-1]))
poi = mc.setInfinity(q=True, poi=True)[0]
# Return sdk data
sdkDict = {}
sdkDict['driver'] = driver[0]
sdkDict['driven'] = driven[0]
sdkDict['driverKeys'] = driverKeys
sdkDict['drivenKeys'] = drivenKeys
sdkDict['itt'] = itt
sdkDict['ott'] = ott
sdkDict['pri'] = pri
sdkDict['poi'] = poi
return sdkDict
def getRoofLinearCurve( startInput, endInput, minValue, maxValue ):
animCurve = cmds.createNode( 'animCurveUU' )
cmds.setKeyframe( f= startInput, v=minValue )
cmds.setKeyframe( f= endInput, v=maxValue )
cmds.keyTangent( itt='linear', ott='linear' )
cmds.selectKey( animCurve )
cmds.setInfinity( poi='cycle', pri='cycle' )
return animCurve
def create_fk_setup(self):
"""Creates the FK setup."""
cmds.setDrivenKeyframe('%s.translateX' % self.fk_jnts[1], cd='%s.length' % self.fk_jnts[0], dv=1, itt='linear', ott='linear')
cmds.setDrivenKeyframe('%s.translateX' % self.fk_jnts[1], cd='%s.length' % self.fk_jnts[0], dv=0, v=0, itt='linear', ott='linear')
cmds.setDrivenKeyframe('%s.translateX' % self.fk_jnts[2], cd='%s.length' % self.fk_jnts[1], dv=1, itt='linear', ott='linear')
cmds.setDrivenKeyframe('%s.translateX' % self.fk_jnts[2], cd='%s.length' % self.fk_jnts[1], dv=0, v=0, itt='linear', ott='linear')
cmds.selectKey('%s_translateX' % self.fk_jnts[1], k=True, f=(1,))
cmds.setInfinity(poi='cycleRelative')
cmds.selectKey('%s_translateX' % self.fk_jnts[2], k=True, f=(1,))
cmds.setInfinity(poi='cycleRelative')
def rotationBakingToLayer(i): cmds.bakeResults( listObjects[i], t = (asT, aeT), sm=True, bol=True, at = "rotate" ) #+ cmds.select( listObjects[i], r=True ) if (cycleInfinity): cmds.setInfinity( pri="cycle", poi="cycle" ) else: cmds.setInfinity( pri="constant", poi="constant" ) cmds.delete( aimLoc, zeroLoc ) #+ cmds.container( "BakeResultsContainer", e=True, rc=True ) cmds.animLayer( "BakeResults", e=True, p = layerName ) cmds.rename( "BakeResults", layerComp ) resetRangeTime()
def loop(self, plug=None, offset=False):
"""Loop this animation.
Args:
plug (HPlug): plug being driven (for efficiency)
offset (bool): cycle with offset
"""
_plug = plug or self.get_plug()
_mode = 'cycle' if not offset else 'cycleRelative'
cmds.setInfinity(_plug, preInfinite=_mode, postInfinite=_mode)
def testInfinities(curves):
print '\nTESTING INFINITY MODES\n'
errors = 0
for inf in [
'constant', 'linear', 'cycle', 'cycleRelative', 'oscillate'
]:
print "### Checking {} infinity mode".format(string.upper(inf))
for curve in curves:
cmds.setInfinity(curve, pri=inf, poi=inf)
errors += verifyCurve(curve)
return errors
def main():
"""
Available types:
constant, linear, cycle, cycleRelative, oscillate
"""
if "cycle" in set(cmds.setInfinity(q=True, preInfinite=True)):
print("Setting pre- and post-infinite to CONSTANT")
cmds.setInfinity(preInfinite="constant", postInfinite="constant")
else:
print("Setting pre- and post-infinite to CYCLE WITHOUT OFFSET")
cmds.setInfinity(preInfinite="cycle", postInfinite="cycle")
def main():
"""
Available types:
constant, linear, cycle, cycleRelative, oscillate
"""
if "cycle" in set(cmds.setInfinity(q=True, preInfinite=True)):
print("Setting pre- and post-infinite to CONSTANT")
cmds.setInfinity(preInfinite="constant", postInfinite="constant")
else:
print("Setting pre- and post-infinite to CYCLE WITHOUT OFFSET")
cmds.setInfinity(preInfinite="cycle", postInfinite="cycle")
def animate_rotation(n, period):
"""
animates rotation of an object
"""
cmds.select(n)
cmds.currentTime(1)
cmds.setKeyframe(n, breakdown=False, attribute="rotateY")
cmds.currentTime(period)
cmds.setAttr(n + '.rotateY', 360)
cmds.setKeyframe(n, breakdown=False, attribute="rotateY")
cmds.selectKey(n + '.rotateY')
cmds.keyTangent(inTangentType='linear', outTangentType='linear')
cmds.setInfinity(postInfinite='cycle')
def readSetDrivenKeyDataFromFile(filePath, lock=False):
'''
Reads and reconstructs setDrivenKeyfraomes from json file exported from writeSetDrivenKeyDataToFile()
sdkFile = 'Z:/users/tcoleman/code/temp_sdk_data.json'
readSetDrivenKeyDataFromFile(sdkFile)
'''
fh = open(filePath, 'r')
sdkDataDict = json.load(fh)
fh.close()
# iterate through dict keys
for sdkCurve, sdkDict in sdkDataDict.iteritems():
driver = sdkDict['driver']
driven = sdkDict['driven']
driverKeys = sdkDict['driverKeys']
drivenKeys = sdkDict['drivenKeys']
itt = sdkDict['itt']
ott = sdkDict['ott']
pri = sdkDict['pri']
poi = sdkDict['poi']
if mc.objExists(driver) and mc.objExists(driven):
i = 0
for driverKey, drivenKey in zip(driverKeys, drivenKeys):
# Create setDrivenKeyframes
mc.setDrivenKeyframe(driven, cd=driver, dv=driverKey, value=drivenKey)
LOG.debug('SetDrivenKeyframe: Driver=%s.%s, Driven=%s.%s' % (driver, driven, driverKey, drivenKey))
# Set keyframe tangents
mc.selectKey(sdkCurve, add=True, k=True, f=(driverKey, driverKey))
mc.keyTangent(itt=itt[i], ott=ott[i])
i = i + 1
# Set pre/post infinity
mc.selectKey(sdkCurve, add=True, k=True, f=(driverKeys[0], driverKeys[0]))
mc.setInfinity(pri=pri)
mc.selectKey(clear=True)
mc.selectKey(sdkCurve, add=True, k=True, f=(driverKeys[-1], driverKeys[-1]))
mc.setInfinity(poi=poi)
# Lock setDrivenKeyframes if specified
if lock:
mc.setAttr('%s.keyTimeValue' % sdkCurve, lock=True)
mc.refresh()
LOG.info('SetDrivenKeyframe Data read from %s' % filePath)
def copyPaste_main_animation(i): cmds.animLayer(obj.final_layer_name, e = True, at = obj.nonLockedList) cmds.select(obj.temp_obj_node, r = True) if (obj.check_cycle): #print myLog, 'Infinity changed to "Cycle"' cmds.cutKey(time = (obj.min_loop_time, obj.start_time - 1)) cmds.cutKey(time = (obj.end_time + 1, obj.max_loop_time)) cmds.setInfinity(pri = "cycle", poi = "cycle") else: #print myLog, 'Infinity changed to "Constant"' cmds.setInfinity(pri = "constant", poi = "constant") temp_copyKey = cmds.copyKey(obj.temp_obj_node, at = obj.nonLocked_attributes) #cmds.copyKey(obj.temp_obj_node, at = nonLocked_attributes) cmds.pasteKey(obj.list_objects[i], o = "replace", al = obj.final_layer_name, at = obj.nonLocked_attributes)
def createParticleSystem_goal():
# Create a constant sized particle object following a deformed torus shape (using goal)
cmds.file(new=True, force=True)
# Create a torus, we will use it as goal
xrez = 14
yrez = 8
goalTorus = cmds.polyTorus( r=1, sr=0.5, tw=0, sx=xrez, sy=yrez, ax=(0, 1, 0), cuv=1, ch=0)[0]
# nParticle creation depends on an optoinVar value, make sure we use the default one
cmds.optionVar( sv=("NParticleStyle","Points") )
# Emit a lot of particle, the actual number will be limited to the max particle attribute in the particleShape
emitter = cmds.emitter(dx=1, dy=0, dz=0, sp=0.1, pos=(0, 5, 0),rate=2500)[0]
particleSystem, particleSystemShape = cmds.nParticle(n="nParticle_test_goal")
cmds.setAttr('%s.lfm' % particleSystemShape, 0) # live forever
cmds.setAttr('%s.particleRenderType' % particleSystemShape, 7) # Blobby, to see radius
cmds.setAttr('%s.maxCount' % particleSystemShape, xrez*yrez) # max count is the number of vertices on the torus
cmds.connectDynamic( particleSystemShape, em=emitter)
# Create Goal
cmds.goal(particleSystem, w=1, utr=0, g=goalTorus);
# Create Initial state to we start with the correct amount of particle
# NOTE: When using this script in command line, the first frame is not correctly evaluated and the particleShape is empty
# This doesn't happens in interactive maya
for i in range(1, 10):
cmds.currentTime(i)
cmds.saveInitialState(particleSystemShape)
cmds.currentTime(1)
bend, bendHandle = cmds.nonLinear( goalTorus, type="bend", lowBound=-1, highBound=1, curvature=0)
cmds.setAttr( "%s.rotateZ" % bendHandle, 90)
cmds.setKeyframe( "%s.curvature" % bend, v=0, t=1, inTangentType="flat", outTangentType="flat")
cmds.setKeyframe( "%s.curvature" % bend, v=-130, t=12, inTangentType="flat", outTangentType="flat")
cmds.setKeyframe( "%s.curvature" % bend, v=130, t=24, inTangentType="flat", outTangentType="flat")
# Make the bend animation loop
cmds.setInfinity( bend, poi="oscillate", attribute="curvature")
return particleSystem, particleSystemShape
def createParticleSystem_goal():
# Create a constant sized particle object following a deformed torus shape (using goal)
cmds.file(new=True, force=True)
# Create a torus, we will use it as goal
xrez = 14
yrez = 8
goalTorus = cmds.polyTorus(r=1, sr=0.5, tw=0, sx=xrez, sy=yrez, ax=(0, 1, 0), cuv=1, ch=0)[0]
# nParticle creation depends on an optoinVar value, make sure we use the default one
cmds.optionVar(sv=("NParticleStyle", "Points"))
# Emit a lot of particle, the actual number will be limited to the max particle attribute in the particleShape
emitter = cmds.emitter(dx=1, dy=0, dz=0, sp=0.1, pos=(0, 5, 0), rate=2500)[0]
particleSystem, particleSystemShape = cmds.nParticle(n="nParticle_test_goal")
cmds.setAttr('%s.lfm' % particleSystemShape, 0) # live forever
cmds.setAttr('%s.particleRenderType' % particleSystemShape, 7) # Blobby, to see radius
cmds.setAttr('%s.maxCount' % particleSystemShape, xrez * yrez) # max count is the number of vertices on the torus
cmds.connectDynamic(particleSystemShape, em=emitter)
# Create Goal
cmds.goal(particleSystem, w=1, utr=0, g=goalTorus);
# Create Initial state to we start with the correct amount of particle
# NOTE: When using this script in command line, the first frame is not correctly evaluated and the particleShape is empty
# This doesn't happens in interactive maya
for i in range(1, 10):
cmds.currentTime(i)
cmds.saveInitialState(particleSystemShape)
cmds.currentTime(1)
bend, bendHandle = cmds.nonLinear(goalTorus, type="bend", lowBound=-1, highBound=1, curvature=0)
cmds.setAttr("%s.rotateZ" % bendHandle, 90)
cmds.setKeyframe("%s.curvature" % bend, v=0, t=1, inTangentType="flat", outTangentType="flat")
cmds.setKeyframe("%s.curvature" % bend, v=-130, t=12, inTangentType="flat", outTangentType="flat")
cmds.setKeyframe("%s.curvature" % bend, v=130, t=24, inTangentType="flat", outTangentType="flat")
# Make the bend animation loop
cmds.setInfinity(bend, poi="oscillate", attribute="curvature")
return particleSystem, particleSystemShape
def infinity_cycle():
infinities = ["constant", "linear", "cycle"]
selected_infinity = cmds.setInfinity(q=1, preInfinite=1, postInfinite=1)[0]
cmds.setInfinity(preInfinite=infinities[infinities.index(selected_infinity)-1])
cmds.setInfinity(postInfinite=infinities[infinities.index(selected_infinity)-1])
message = infinities[infinities.index(selected_infinity)-1]
status_message = '<div style="color:{2}; font-family:{1}">{0} </div>'\
.format( message
, FONT
, FONT_COLOR
)
cmds.inViewMessage( statusMessage=status_message
, fade=True
, backColor=BACKGROUND_COLOR
, fadeStayTime=600
, fadeInTime=0
, fadeOutTime=200
, position="topCenter"
)
def LinearToArc(radius):
diameter = radius * 2
origframe = cmds.currentTime(q=True)
selection = cmds.ls(selection=True)
if (len(selection) == 0):
cmds.warning("Select the object with the travel distance")
return
tZ = "%s.translateZ" % selection[0]
tX = "%s.translateX" % selection[0]
startZ = cmds.getAttr(tZ, t=0)
endZ = cmds.getAttr(tZ, t=30)
cmds.cutKey(selection[0], clear=True)
newX = cmds.getAttr(tX)
newX += (diameter / 2.0)
if (startZ != endZ):
pivot = cmds.spaceLocator(name="TurnPivot")
cmds.animLayer(lt.GetSelectedLayers()[0],
edit=True,
addSelectedObjects=True)
pivotName = pivot[0]
distance = endZ - startZ
pi = 3.142857142857143
circumf = diameter * pi
degrees = (distance / circumf) * 360
cmds.setAttr(tZ, 0)
cmds.setAttr(tX, newX)
cmds.parentConstraint(pivot, selection[0], mo=True)
cmds.setKeyframe(pivot, t=0)
cmds.currentTime(30)
#animate the arc
rY = "%s.rotateZ" % pivotName
cmds.setAttr(rY, -degrees)
cmds.setKeyframe(pivot, t=30)
cmds.currentTime(origframe)
#set the curve to linear
rotCurve = "%s_rotateZ" % pivotName
cmds.selectKey(rotCurve, r=True)
cmds.keyTangent(itt="linear", ott="linear")
cmds.setInfinity(poi="cycleRelative")
cmds.bakeResults(selection[0], t=(0, 30))
if (startZ == endZ):
cmds.warning("The object is not traveling")
def offsetCycleSpeedControlNodeSetup(waveDeformer, speedAttr, cycleLength, offset):
""" Providing the proper variables, creates a nodal setup to control the speed of an offset animation """
""" Create the nodes """
speedMDNode = createNamedNode("speedMult", "multiplyDivide")
offsetNode = createNamedNode("offset", "multiplyDivide")
# mc.setAttr ((frameCountDivNode+'.operation'),2)
""" create the cycle """
mc.setKeyframe((waveDeformer + ".offset"), time=0, value=0, inTangentType="spline", outTangentType="spline")
mc.setKeyframe(
(waveDeformer + ".offset"),
time=cycleLength,
value=(offset * 0.99),
inTangentType="linear",
outTangentType="linear",
)
mc.setInfinity((waveDeformer + ".offset"), pri="linear", poi="linear")
""" Connect the nodes """
mc.connectAttr(("time1.outTime"), (speedMDNode + ".input1X"))
mc.connectAttr(speedAttr, (speedMDNode + ".input2.input2X"))
mc.connectAttr((speedMDNode + ".outputX"), (waveDeformer + "_offset.input"))
def ballCycle(self, part, cycleMethod):
at = "rotateZ"
cycle = "{}.{}".format(self.robot, part)
ball = "{}|{}|ballParent1|ballParent2".format(
self.robot,
part.replace("cycleF", "f").replace("cycleB", "b"))
if cmds.getAttr(cycle):
for i, t in enumerate(self.keyTime):
cmds.setKeyframe(ball,
value=self.keyRotate[i],
attribute=at,
time=t)
cmds.keyTangent(ball,
inTangentType="linear",
attribute=at,
time=(0, 81))
cmds.setInfinity(ball, attribute=at, postInfinite="cycle")
else:
cmds.cutKey(ball, time=(1, 80), attribute=at)
self.setJob(cycle, cycleMethod)
def makeInfinity():
"""Set the infinity type"""
if checkSelected() is None:
cmds.warning("Nothing Selected!")
return
if checkKeys(checkSelected()) is None:
cmds.warning("Object has no keys!")
return
preInfi, proInfi = queryInfinity()
newPre = switchSetting(preInfi)
newPro = switchSetting(proInfi)
cmds.setInfinity(graphEditor, pri=newPre)
cmds.setInfinity(graphEditor, poi=newPro)
print "Pre Infinity is now {0}. Post Infinity is now {1}.".format(
newPre, newPro),
#Display infinity
graphEditorAC = "graphEditor1GraphEd"
cmds.animCurveEditor(graphEditorAC, e=True, displayInfinities="on")
def connectToMesher(name = 'object'):
gp = cmd.ls(sl=True)
if len(gp) is not 1:
cmd.error('You must select only a "GEO_GP" group node')
else:
subObjects = cmd.listRelatives(gp , allDescendents = True, noIntermediate= True, type = 'mesh')
count = len(subObjects)
choice = cmd.shadingNode('choice', asUtility = True, name = '%s_mesher' %name)
for i in range(count):
cmd.connectAttr('%s.worldMesh[0]' % subObjects[i], '%s.input[%d]' %(choice, i), force = True)
cmd.setKeyframe('%s.selector' % choice, time = i+1, value = i)
outMesh = cmd.createNode('transform', name = '%s_mesh' % name)
outShape = cmd.createNode('mesh', name = '%sShape' % outMesh, parent = outMesh)
cmd.connectAttr('%s.output' % choice, '%s.inMesh' % outShape)
cmd.selectKey('%s_selector' % choice, k = True)
cmd.setInfinity(pri = 'cycle', poi = 'cycle')
obs = cmd.listRelatives(gp, type = 'transform')
for one in range(1, count):
cmd.parent(subObjects[one], obs[0], r = True, s = True)
cmd.delete(obs[one])
for one in [outMesh, obs[0]] :
cmd.parent(one, world = True)
cmd.rename(obs[0], '%s_shapes' % name)
def create_orbit_animation(i):
# i'm offsetting the frames by 1500 (i may increase this) so that I can do the first part of the script
# this creates orbits and animates them from frame 1500 to 11500
cmds.circle(radius=i * 2 + 5,
normalY=1,
normalZ=0,
name=names[i] + '_orbit')
cmds.select(names[i] + '_orbit')
cmds.setAttr(names[i] + '_orbit.rotateY', int(i * 90 / 8))
cmds.select(names[i], names[i] + '_orbit')
# cmds.pathAnimation(name=names[i]+'_path', fractionMode=True, follow=True, followAxis='x', upAxis='y', worldUpType='vector', worldUpVector=[0, 1, 0], inverseUp=False, bank=False, startTimeU=1500, endTimeU=1500+int(time_period[i]*10000/time_period[3]/2))
cmds.pathAnimation(name=names[i] + '_path',
fractionMode=True,
follow=False,
startTimeU=1500,
endTimeU=1500 +
int(time_period[i] * 10000 / time_period[3] / 2))
cmds.selectKey(clear=True)
cmds.selectKey(names[i] + '_path',
keyframe=True,
time=(1500, 1500 +
int(time_period[i] * 10000 / time_period[3] / 2)))
cmds.keyTangent(inTangentType='linear', outTangentType='linear')
cmds.setInfinity(postInfinite='cycle')
def offsetCycleSpeedControlNodeSetup(waveDeformer, speedAttr, cycleLength,
offset):
""" Providing the proper variables, creates a nodal setup to control the speed of an offset animation """
""" Create the nodes """
speedMDNode = createNamedNode('speedMult', 'multiplyDivide')
offsetNode = createNamedNode('offset', 'multiplyDivide')
#mc.setAttr ((frameCountDivNode+'.operation'),2)
""" create the cycle """
mc.setKeyframe((waveDeformer + '.offset'),
time=0,
value=0,
inTangentType='spline',
outTangentType='spline')
mc.setKeyframe((waveDeformer + '.offset'),
time=cycleLength,
value=(offset * .99),
inTangentType='linear',
outTangentType='linear')
mc.setInfinity((waveDeformer + '.offset'), pri='linear', poi='linear')
""" Connect the nodes """
mc.connectAttr(('time1.outTime'), (speedMDNode + '.input1X'))
mc.connectAttr(speedAttr, (speedMDNode + '.input2.input2X'))
mc.connectAttr((speedMDNode + '.outputX'),
(waveDeformer + '_offset.input'))
def loadAnimData(animFile,lineID,targetNS,frameOffset=0,infinityOverride=None):
'''
Apply anim data from anim file
@param animFile: Anim file path
@type animFile: str
@param lineID: Line ID (number) which marks the start of the node.attr anim data
@type lineID: int
@param targetNS: Target namespace to apply the static data to
@type targetNS: str
@param frameOffset: Frame offset to apply to the loaded animation data
@type frameOffset: int or float
@param infinityOverride: Force infinity mode override for loaded animation data.
@type infinityOverride: str or None
'''
# Initialize Target Attribute
attrPath = ''
animData = []
# =============
# - Read File -
# =============
f = open(animFile,'r')
for i, line in enumerate(f):
# Skip to relevant line items
if i < lineID: continue
# Get Anim Data Header
if i == lineID:
lineItem = line.split()
attr = lineItem[2]
obj = lineItem[3].split(':')[-1]
attrPath = targetNS+':'+obj+'.'+attr
# Check Target Attribute
if not mc.objExists(attrPath):
print('Attribute "'+attrPath+'" does not exist!! Skipping...')
return False
if not mc.getAttr(attrPath,se=True):
print('Attribute "'+attrPath+'" is not settable!! Skipping...')
return False
# Proceed to Next Line
continue
# Check Anim Data End
if '}' in line: break
# Build Anim Data
animData.append(line)
# ===================
# - Apply Anim Data -
# ===================
# Get Curve Data
weighted = bool(animData[1].split()[-1][:-1])
preInf = animData[2].split()[-1][:-1]
postInf = animData[3].split()[-1][:-1]
# Check Infinity Mode Override
if infinityOverride:
# Check Valid Infinity Mode
if not infinityOverride in ['constant','linear','cycle','cycleRelative','oscillate']:
print('Invalid infinity mode "'+infinityOverride+'"! Using stored values...')
else:
preInf = infinityOverride
postInf = infinityOverride
# Load Animation Data
for data in animData[5:]:
# Clean Data Line
data = data.replace(';','')
# Split Data Items
dataItem = data.split()
# Apply Time Offset
time = float(dataItem[0])+frameOffset
value = float(dataItem[1])
ittype = dataItem[2]
ottype = dataItem[3]
lock = bool(dataItem[4])
bd = bool(int(dataItem[6][0]))
mc.setKeyframe(attrPath,t=time,v=value)
mc.keyTangent(attrPath,e=True,weightedTangents=weighted)
mc.keyTangent(attrPath,e=True,t=(time,time),lock=lock,itt=ittype,ott=ottype)
mc.keyframe(attrPath,e=True,t=(time,time),breakdown=bd)
if weighted: mc.keyTangent(attrPath,weightLock=1)
if len(dataItem) == 11:
inAn = float(dataItem[7])
inWt = float(dataItem[8])
otAn = float(dataItem[9])
otWt = float(dataItem[10])
mc.keyTangent( attrPath,
e=True,
t=(time,time),
inAngle=inAn,
inWeight=inWt,
outAngle=otAn,
outWeight=otWt )
# Set Curve Infinity
mc.setInfinity(attrPath,pri=preInf,poi=postInf)
# Return Result
return True
def getAnimData(animCurves=None, showProgress=None):
if animCurves is None:
getCurves = getAnimCurves(True)
animCurves = getCurves[0]
getFrom = getCurves[1]
else:
getFrom = None
if not animCurves:
return
if getFrom is None:
keysSel = getTarget("keysSel", animCurves, getFrom, rangeAll=True)
else:
keysSel = getTarget("keysSel", animCurves, getFrom)
if utilMod.isEmpty(keysSel):
return
if showProgress:
utilMod.startProgressBar("aTools - Saving animation data...")
objsAttrs = getTarget("", animCurves=animCurves)
objects = objsAttrs[0]
attributes = objsAttrs[1]
animData = {"objects": objects, "animData": []}
if showProgress:
firstStep = 0
totalSteps = len(animCurves)
estimatedTime = None
status = "aTools - Saving animation data..."
startChrono = None
for thisStep, loopCurve in enumerate(animCurves):
if showProgress:
startChrono = utilMod.chronoStart(startChrono, firstStep, thisStep, totalSteps, estimatedTime, status)
if objects[thisStep] is None:
continue
if len(keysSel[thisStep]) == 0:
continue
weighted = cmds.keyTangent(loopCurve, query=True, weightedTangents=True)
if weighted is not None:
weighted = weighted[0]
objAttr = "%s.%s" % (objects[thisStep], attributes[thisStep])
infinity = cmds.setInfinity(objAttr, query=True, preInfinite=True, postInfinite=True)
animData["animData"].append(
{"objAttr": objAttr, "curveData": [weighted, infinity], "keyframeData": [], "tangentData": []}
)
time = (keysSel[thisStep][0], keysSel[thisStep][-1])
timeChange = cmds.keyframe(loopCurve, query=True, time=time, timeChange=True)
valueChange = cmds.keyframe(loopCurve, query=True, time=time, valueChange=True)
breakdowns = cmds.keyframe(loopCurve, query=True, time=time, breakdown=True)
inTangentType = cmds.keyTangent(loopCurve, query=True, time=time, inTangentType=True)
outTangentType = cmds.keyTangent(loopCurve, query=True, time=time, outTangentType=True)
ix = cmds.keyTangent(loopCurve, query=True, time=time, ix=True)
iy = cmds.keyTangent(loopCurve, query=True, time=time, iy=True)
ox = cmds.keyTangent(loopCurve, query=True, time=time, ox=True)
oy = cmds.keyTangent(loopCurve, query=True, time=time, oy=True)
lock = cmds.keyTangent(loopCurve, query=True, time=time, lock=True)
weightLock = cmds.keyTangent(loopCurve, query=True, time=time, weightLock=True)
for n, loopKey in enumerate(keysSel[thisStep]):
breakdown = (timeChange[n] in breakdowns) if breakdowns else []
keyframe = [timeChange[n], valueChange[n], breakdown]
tangent = [inTangentType[n], outTangentType[n], ix[n], iy[n], ox[n], oy[n], lock[n], weightLock[n]]
animData["animData"][-1]["keyframeData"].append(keyframe)
animData["animData"][-1]["tangentData"].append(tangent)
if showProgress:
estimatedTime = utilMod.chronoEnd(startChrono, firstStep, thisStep, totalSteps)
if showProgress:
utilMod.setProgressBar(endProgress=True)
return animData
def applyAnimData(animData, pasteInPlace=True, onlySelectedNodes=False, showProgress=None, status=None):
if animData:
status = "aTools - Applying animation data..." if not status else status
objects = animData["objects"]
if not onlySelectedNodes:
# print "objects1", objects
if len(objects) > 0:
objects = [loopObj for loopObj in objects if loopObj is not None and cmds.objExists(loopObj)]
# print "objects2", objects
if len(objects) > 0:
cmds.select(objects)
else:
objects = getObjsSel()
if not objects:
cmds.warning("No objects to apply.")
return
cmds.refresh(suspend=True)
if showProgress:
utilMod.startProgressBar(status)
if pasteInPlace:
currKey = cmds.currentTime(query=True)
for aData in animData["animData"]:
allKeys = []
keys = aData["keyframeData"]
for n, key in enumerate(keys):
timeChange = aData["keyframeData"][n][0]
allKeys.append(timeChange)
firstKey = 0
if allKeys:
firstKey = min(allKeys)
lastKey = max(allKeys)
cutIn = currKey + firstKey
cuOut = lastKey + firstKey
else:
cutIn = -49999
cuOut = 50000
objsAttrs = [loopItem["objAttr"] for loopItem in animData["animData"]]
existObjsAttrs = [loopObjAttr for loopObjAttr in objsAttrs if cmds.objExists(loopObjAttr)]
createDummyKey(existObjsAttrs)
cmds.cutKey(existObjsAttrs, time=(cutIn, cuOut), clear=True)
if showProgress:
totalSteps = 0
firstStep = 0
thisStep = 0
estimatedTime = None
startChrono = None
for loopObjAttr in existObjsAttrs:
index = objsAttrs.index(loopObjAttr)
aData = animData["animData"][index]
keys = aData["keyframeData"]
totalSteps = totalSteps + len(keys)
for loopObjAttr in existObjsAttrs:
index = objsAttrs.index(loopObjAttr)
aData = animData["animData"][index]
weighted = aData["curveData"][0]
infinity = aData["curveData"][1]
keys = aData["keyframeData"]
for n, key in enumerate(keys):
if showProgress:
if cmds.progressBar(G.progBar, query=True, isCancelled=True):
refresh()
utilMod.setProgressBar(endProgress=True)
return
startChrono = utilMod.chronoStart(
startChrono, firstStep, thisStep, totalSteps, estimatedTime, status
)
# read values
timeChange = aData["keyframeData"][n][0]
valueChange = aData["keyframeData"][n][1]
breakdown = aData["keyframeData"][n][2]
inTangentType = aData["tangentData"][n][0]
outTangentType = aData["tangentData"][n][1]
ix = aData["tangentData"][n][2]
iy = aData["tangentData"][n][3]
ox = aData["tangentData"][n][4]
oy = aData["tangentData"][n][5]
lock = aData["tangentData"][n][6]
weightLock = aData["tangentData"][n][7]
if pasteInPlace:
timeChange = timeChange - firstKey + currKey
time = (timeChange, timeChange)
# create key
cmds.setKeyframe(loopObjAttr, time=time, value=valueChange, noResolve=True)
if n == 0:
cmds.keyTangent(loopObjAttr, weightedTangents=weighted)
cmds.setInfinity(loopObjAttr, edit=True, preInfinite=infinity[0], postInfinite=infinity[1])
if breakdown:
cmds.keyframe(loopObjAttr, edit=True, time=time, breakdown=True)
cmds.keyTangent(loopObjAttr, time=time, ix=ix, iy=iy, ox=ox, oy=oy, lock=lock)
if weighted:
cmds.keyTangent(loopObjAttr, time=time, weightLock=weightLock)
cmds.keyTangent(loopObjAttr, time=time, inTangentType=inTangentType, outTangentType=outTangentType)
if showProgress:
estimatedTime = utilMod.chronoEnd(startChrono, firstStep, thisStep, totalSteps)
thisStep += 1
deleteDummyKey(existObjsAttrs)
if showProgress:
refresh()
utilMod.setProgressBar(endProgress=True)
def translationStart():
global asT
asT = cmds.playbackOptions(query=True, min=True) # Левая граница анимации
global aeT
aeT = cmds.playbackOptions(query=True, max=True) # Правая граница анимации
resetLoopTime()
global listObjects
listObjects = cmds.ls(sl=True) # Список трансформов
#||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
global listFixed
listFixed = listObjects[:]
for i in range(len(listFixed)):
listFixed[i] = listFixed[i].replace("|", "_")
#||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
global mainLayerName
mainLayerName = "OVERLAPPER" # Имя главного слоя
if (cmds.objExists(mainLayerName)):
print "\n||| OVERLAPPER start |||\n"
else:
cmds.animLayer(mainLayerName)
print "\n||| OVERLAPPER start ||| Layer created |||\n"
#||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
for i in range(len(listFixed)): # Основной цикл
global aimLoc
aimLoc = listFixed[i] + "_aim_loc" # Имя аим локатора
global tempLoc
tempLoc = listFixed[i] + "_temp_loc" # Имя физ локатора
global tempPart
tempPart = listFixed[i] + "_temp_part" # Имя физ частицы
global tempNucl
tempNucl = "nucleus1" # Имя физ ноды
global partAimLoc
partAimLoc = aimLoc + ".translate" # Обращение к позиции аим локатора
global partRtype
partRtype = tempPart + "Shape.particleRenderType" # Обращение к типу отображения частицы
global partRrad
partRrad = tempPart + "Shape.radius" # Обращение к размеру частицы
global partRsm
partRsm = tempPart + "Shape.goalSmoothness" # Обращение к мягкости физики
global partRwe
partRwe = tempPart + "Shape.goalWeight[0]" # Обращение к весу ноды
global partPos
partPos = tempPart + ".center" # Обращение к центру частицы
global partNucl
partNucl = tempNucl + ".timeScale" # Обращение к скейлу времени физ ноды
global nuclStart
nuclStart = tempNucl + ".startFrame" # Обращение к старту симуляции физ ноды
cmds.spaceLocator(n=tempLoc) # Создаём физ локатор
cmds.matchTransform(tempLoc, listObjects[i],
pos=True) # Перемещаем локатор в пивот объекта
objCenter = tempLoc + ".translate" # Обращение к центру объекта
objC = cmds.getAttr(objCenter) # Записываем центр объекта
locCenter = tempLoc + ".center" # Обращение к центру физ локатора
locTr = tempLoc + ".translate" # Обращение к позиции физ локатора
cmds.nParticle(p=objC, n=tempPart,
c=1) # Создаём частицу в целевой позиции
cmds.goal(tempPart, w=goalW, utr=1,
g=tempLoc) # Создаём физическую связь
cmds.select(tempLoc, r=True) # Выделяем физ локатор
cmds.select(listObjects[i], add=True) # Выделяем целевого родителя
cmds.parent(r=True) # Создаём иерархию
cmds.matchTransform(tempLoc, listObjects[i],
pos=True) # Перемещаем локатор в пивот объекта
#||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
cmds.setAttr(partRtype, pShape)
cmds.setAttr(partRrad, pRad)
cmds.setAttr(partRsm, goalSmooth)
cmds.setAttr(partRwe, goalW)
cmds.setAttr(partNucl, timeScale)
cmds.setAttr(nuclStart, asT)
#||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
cmds.duplicate(tempLoc, rr=True, n=aimLoc) # Дублируем локатор
cmds.select(aimLoc, r=True) # Выделяем аим локатор
cmds.parent(w=True) # Разбираем иерархию
cmds.connectAttr(partPos, partAimLoc,
f=True) # Привязываем аим локатор к частице
global minLoopTime
minLoopTime = aeT * -2
global maxLoopTime
maxLoopTime = aeT * 2
if (cycle):
cmds.setAttr(nuclStart, minLoopTime)
cmds.bakeResults(
aimLoc, t=(minLoopTime, maxLoopTime), sm=True,
at="translate") # Запекание аим локатора для цикла
cmds.delete(tempLoc, tempPart, tempNucl) # Удаляем объекты физики
setTimeToMin()
cmds.select(aimLoc, r=True) # Выделяем аим локатор как родителя
cmds.select(listObjects[i],
add=True) # Выделяем объект как подчиненного
cmds.parentConstraint(mo=True, sr=["x", "y", "z"],
w=1) # Создаём позиционный констрейн
resetLoopTime()
else:
cmds.bakeResults(
aimLoc, t=(asT, aeT), sm=True,
at="translate") # Запекание аим локатора для линейной анимации
cmds.delete(tempLoc, tempPart, tempNucl) # Удаляем объекты физики
resetLoopTime()
cmds.select(aimLoc, r=True) # Выделяем аим локатор как родителя
cmds.select(listObjects[i],
add=True) # Выделяем объект как подчиненного
cmds.parentConstraint(mo=True, sr=["x", "y", "z"],
w=1) # Создаём позиционный констрейн
#||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
layerBase = "translate_" # Имя базы слоя
layerName = layerBase + listFixed[i] # Имя слоя
layerComp = listFixed[i] + '_layer_{0}'.format(
"0") # Имя компонента слоя
if (cmds.objExists(layerName)):
cmds.bakeResults(listObjects[i],
t=(asT, aeT),
sm=True,
bol=True,
at="translate") # Запекаем объект в слой
cmds.select(listObjects[i], r=True)
cmds.setInfinity(pri="cycle", poi="cycle")
cmds.delete(aimLoc) # Удаляем объекты скрипта
cmds.container("BakeResultsContainer", e=True,
rc=True) # Удаляем контейнер
cmds.animLayer(
"BakeResults", e=True, p=layerName
) # Переносим слой с анимацией в основной слой объекта
cmds.rename("BakeResults", layerComp) # Переименовываем слой
resetLoopTime()
else:
cmds.animLayer(
layerName) # Создаём пустой слой для всех оверлапов объекта
cmds.animLayer(
layerName, e=True,
p=mainLayerName) # Переносим базу слоя в главный слой
cmds.bakeResults(listObjects[i],
t=(asT, aeT),
sm=True,
bol=True,
at="translate") # Запекаем объект в слой
cmds.select(listObjects[i], r=True)
cmds.setInfinity(pri="cycle", poi="cycle")
cmds.delete(aimLoc) # Удаляем объекты скрипта
cmds.container("BakeResultsContainer", e=True,
rc=True) # Удаляем контейнер
cmds.animLayer(
"BakeResults", e=True, p=layerName
) # Переносим слой с анимацией в основной слой объекта
cmds.rename("BakeResults", layerComp) # Переименовываем слой
resetLoopTime()
cmds.select(d=True) # Деселект
for l in listObjects:
cmds.select(l, add=True)
print "\n||| OVERLAPPER end |||\n"
def testCurves():
""" Testing suite function that will generate a random animation for a cube and run
checks whether the values evaluated by the animation library match Maya's. The test
will iterate over all infinity and tangent types as well as interpolation methods
for rotation curves"""
cmds.file(f=True, new=True)
name = 'cube'
# generate random animation for the cube
cmds.polyCube(name=name)
cmds.currentTime(-10)
cmds.move(rand.uniform(-100.0, 100.0),
rand.uniform(-100.0, 100.0),
rand.uniform(-100.0, 100.0),
name,
a=True)
cmds.rotate(rand.uniform(-360.0, 360.0),
rand.uniform(-360.0, 360.0),
rand.uniform(-360.0, 360.0),
name,
a=True)
cmds.setKeyframe(name)
cmds.currentTime(0)
cmds.move(rand.uniform(-100.0, 100.0),
rand.uniform(-100.0, 100.0),
rand.uniform(-100.0, 100.0),
name,
a=True)
cmds.rotate(rand.uniform(-360.0, 360.0),
rand.uniform(-360.0, 360.0),
rand.uniform(-360.0, 360.0),
name,
a=True)
cmds.setKeyframe(name)
cmds.currentTime(10)
cmds.move(rand.uniform(-100.0, 100.0),
rand.uniform(-100.0, 100.0),
rand.uniform(-100.0, 100.0),
name,
a=True)
cmds.rotate(rand.uniform(-360.0, 360.0),
rand.uniform(-360.0, 360.0),
rand.uniform(-360.0, 360.0),
name,
a=True)
cmds.setKeyframe(name)
cmds.currentTime(20)
cmds.move(rand.uniform(-100.0, 100.0),
rand.uniform(-100.0, 100.0),
rand.uniform(-100.0, 100.0),
name,
a=True)
cmds.rotate(rand.uniform(-360.0, 360.0),
rand.uniform(-360.0, 360.0),
rand.uniform(-360.0, 360.0),
name,
a=True)
cmds.setKeyframe(name)
cmds.currentTime(30)
cmds.move(rand.uniform(-100.0, 100.0),
rand.uniform(-100.0, 100.0),
rand.uniform(-100.0, 100.0),
name,
a=True)
cmds.rotate(rand.uniform(-360.0, 360.0),
rand.uniform(-360.0, 360.0),
rand.uniform(-360.0, 360.0),
name,
a=True)
cmds.setKeyframe(name)
curves = [
name + '_translateX', name + '_rotateX', name + '_rotateY',
name + '_rotateZ', name + '_visibility'
]
rotCurves = [
name + '_rotateX',
name + '_rotateY',
name + '_rotateZ',
]
infinities = ['constant', 'linear', 'cycle', 'cycleRelative', 'oscillate']
tangents = [
'linear', 'fast', 'slow', 'flat', 'step', 'stepnext', 'fixed',
'clamped', 'plateau', 'spline'
]
interpolation = [
'none', 'euler', 'quaternion', 'quaternionSlerp', 'quaternionSquad'
]
errors = 0
print '\nTESTING INFINITY MODES\n'
for inf in infinities:
print "### Checking infinity mode: {}".format(inf)
for curve in curves:
cmds.setInfinity(curve, pri=inf, poi=inf)
errors += verifyCurve(curve)
print '\nTESTING TANGENT TYPES\n'
for tan in tangents:
print "### Checking tangent: {}".format(tan)
cmds.keyTangent(curves, edit=True, time=(':', ), itt=tan, ott=tan)
for curve in curves:
errors += verifyCurve(curve)
print '\nTESTING INTERPOLATION MODES\n'
for int in interpolation:
print "### Checking interpolation mode: {}".format(int)
for curve in rotCurves:
cmds.rotationInterpolation(curve, convert=int)
if int == "none" or int == "euler":
for curve in rotCurves:
errors += verifyCurve(curve)
else:
errors += verifyCurveQuaternion(rotCurves[0], rotCurves[1],
rotCurves[2])
print "\nTotal errors: {}".format(errors)
def Importanim(posefile,*args):
lst=mc.ls(sl=1)
if lst==[]:
mc.confirmDialog (title='About' ,message= 'Nothing is selected',ma='center', button=['OK'] ,defaultButton='Yes')
else:
Currnt_time = mc.currentTime(q = True)
imp_name1=lst[0].split(':')[0]
imp_name =imp_name1
filename = open(posefile,'r+')
lines = filename.readlines()
astName=''
for line in lines:
if 'Asst_name' in line:
astName=line.split(' ')[1].strip()
elif 'frameRange' in line:
range =line.split(' ')[1].strip()
filename.close()
print 'range '+range
offset = Currnt_time - float(range)
print offset
filename = open(posefile,'r+')
print "\nReading Animation Curves\n"
endit = 0
line1 = filename.readline()
postI='constant';preI='constant'
while(line1 != 'End of Anim'):
line1 = filename.readline()
wrd=line1.split()
if line1 [0:5] == "anim " or line1 [0:6]== "static":
repl_wrd=wrd[3].replace(astName,imp_name)
curAttr=repl_wrd+'.'+wrd[1]
node=repl_wrd;attr=wrd[1];endit=0
curAttrLong = (node + "." + attr)
if mc.objExists(node):
test2 = mc.ls (curAttrLong)
if len(test2)>0:
if line1 [0:6]== "static":
connected = mc.listConnections (curAttrLong,d=0)
if (mc.getAttr(curAttrLong,l=1)== 0 and connected == None):
setMe = ("mc.setAttr('" + curAttrLong + "'," + wrd[5] + ")")
eval(setMe)
else:
print ("Warning: Attribute is locked - " + curAttr + "\n")
elif line1 [0:5] == "anim ":
while (endit == 0):
line1 = filename.readline()
if line1 [2:11]=='weighted ':
if line1 [11:12]=='T':
weighted = mc.keyTangent(curAttr,e=1,weightedTangents=1)
weightState = 1
else:
weightState = 0
if line1 [2:7]=='preIn':
wrd=line1.split()
preI=wrd[1]
if line1 [2:8]=='postIn':
wrd=line1.split()
postI=wrd[1]
if line1 [2:6]=='keys':
line1 = filename.readline()
while (line1 != "}"):
try:
wrd=line1.split()
if not wrd[0] == "}":
frameTime = float(wrd[0])
timediff = offset + frameTime
time = timediff
value = wrd[1]
inType = wrd[2]
outType = wrd[3]
tanLock = wrd[4]
weightLock = wrd[5]
breakDown = 0
tan1=0
tan2=0
weight1=0
weight2=0
wrd_len=len(wrd)
if wrd_len==7:
breakDown = wrd[6]
else:
breakDown = wrd[6]
if wrd_len>7:
tan1 = wrd[7]
weight1=wrd[8]
if wrd_len>9:
tan2 = wrd[9]
weight2=wrd[10]
mc.setKeyframe(curAttr,time=time,value=float(value),bd=int(breakDown))
mc.keyTangent(curAttr,lock=bool(tanLock),t=(time,time))
if weightState == 1 :
mc.keyTangent(curAttr,t=(time,time),weightLock=int(weightLock))
if inType != "fixed" and outType != "fixed":
mc.keyTangent(curAttr,e=1,a=1,t=(time,time),itt=inType,ott=outType)
if inType == "fixed" and outType != "fixed":
mc.keyTangent(curAttr,e=1,a=1,t=(time,time),inAngle=tan1,inWeight=float(weight1),itt=inType,ott=outType)
if inType != "fixed" and outType == "fixed":
mc.keyTangent(curAttr,e=1,a=1,t=(time,time),outAngle=tan1,inWeight=float(weight1),itt=inType,ott=outType)
if inType == "fixed" and outType == "fixed":
mc.keyTangent(curAttr,e=1,a=1,t=(time,time),inAngle=tan1,inWeight=float(weight1),outAngle=tan2,outWeight=float(weight2),itt=inType,ott=outType)
line1 = filename.readline()
except IndexError:
break
mc.setInfinity(curAttr,poi=postI,pri=preI)
endit=1
else:
print 'Warning:'+curAttrLong+ ' Does not exist..Skipping'
else:
print 'Warning:'+wrd[3]+ ' Does not exist..Skipping'
filename.close()
mc.select(clear = True)
print "\nDone Reading Animation Curves\n"
def linear_cycle(planet):
cmds.selectKey( planet, keyframe=True)
cmds.keyTangent( inTangentType ='linear', outTangentType='linear' )
cmds.setInfinity ( poi='cycle' )
def loadAnimXML(xmlTree, ctrl, targRes = "texture", obj = None):
errorLog = []
ctrlObjColon = ctrl.tag.replace(".", ":")
ctrlObj = convertName(ctrlObjColon, targRes)
objName = obj if obj else ctrlObj
if not mc.objExists(objName):
errorLog.append("Object does not exist : %s"%objName)
else:
for attr in ctrl.getchildren():
ctrlAttrib = attr.tag
curAttr = '%s.%s'%(objName, ctrlAttrib)
try:
mc.getAttr(curAttr, l = 1)
except:
errorLog.append("Attribute missing : %s"%curAttr)
continue
animType = attr.attrib['Type']
if animType == 'static':
attrValue = attr.attrib['valueStatic']
if attrValue == "True":
attrValue = True
elif attrValue == "False":
attrValue = False
else:
attrValue = float(attrValue)
mc.setAttr(curAttr, attrValue)
elif animType == 'anim':
attrBd = attr.attrib['breakDown']
attrPreIn = attr.attrib['preInfinity']
attrPosIn = attr.attrib['postInfinity']
attrWeight = attr.attrib['weightedTangents']
breakDn = False
for key in attr.getchildren():
keytim = key.tag
time = keytim.split('key')[1]
inAng = key.attrib['inAngle']
outAng = key.attrib['outAngle']
inTan = key.attrib['inTangent']
outTan = key.attrib['outTangent']
inWei = float(key.attrib['inWeight'])
outWei = float(key.attrib['outWeight'])
tanLok = key.attrib['tanLock']
weiLok = key.attrib['weightLock']
keyVal = key.attrib['valueChange']
breakDn = False
bd_itm = str(attrBd)
if bd_itm != 'None':
breakDn = True
mc.setKeyframe(curAttr, time = time, value = float(keyVal), bd = breakDn)
mc.keyTangent(curAttr, lock = bool(tanLok), t = (time,time))
if attrWeight == 'True':
try:
mc.keyTangent(curAttr, t = (time,time), weightLock = weiLok)
except:
pass
if inTan != "fixed" and outTan != "fixed":
mc.keyTangent(curAttr, e = 1, a = 1, t = (time,time), itt = inTan, ott = outTan)
if inTan == "fixed" and outTan != "fixed":
mc.keyTangent(curAttr, e = 1, a = 1, t = (time,time), inAngle = inAng, inWeight = inWei, itt = inTan, ott = outTan)
if inTan != "fixed" and outTan == "fixed":
mc.keyTangent(curAttr, e = 1, a = 1, t = (time,time), outAngle = outAng, inWeight = inWei, itt = inTan, ott = outTan)
if inTan == "fixed" and outTan == "fixed":
mc.keyTangent(curAttr, e = 1, a = 1, t = (time,time), inAngle = inAng, inWeight = inWei, outAngle = outAng, outWeight = outWei, itt = inTan, ott = outTan)
mc.setInfinity(curAttr, poi = attrPosIn, pri = attrPreIn)
return errorLog
def toObjs(self, **args):
replace = args.get('replace', False)
inverse = args.get('inverse', False)
startFrame = args.get('startFrame', self.getRange()[0])
objsToFilter = args.get('objsToFilter', None)
matchObjName = args.get('matchObjName', None)
mirror = args.get('mirror', None)
overrideNamespace = args.get('overrideNamespace', None)
tanType = [
'clamped', 'fast', 'flat', 'linear', 'plateau', 'slow', 'spline',
'step next', 'fixed', 'stepped'
]
# default: keyTangent
listCmdsTanType = []
listCmdsTanType.append('fixed')
listCmdsTanType.append('linear')
listCmdsTanType.append('flat')
listCmdsTanType.append('step')
listCmdsTanType.append('slow')
listCmdsTanType.append('fast')
listCmdsTanType.append('spline')
listCmdsTanType.append('clamped')
listCmdsTanType.append('plateau')
listCmdsTanType.append('stepnext')
listCmdsTanType.append('auto')
dictNodeTanType = {}
dictNodeTanType['1'] = listCmdsTanType[0] #'Fixed'
dictNodeTanType['2'] = listCmdsTanType[1] #'Linear'
dictNodeTanType['3'] = listCmdsTanType[2] #'Flat'
dictNodeTanType['5'] = listCmdsTanType[3] #'Step'
dictNodeTanType['6'] = listCmdsTanType[4] #'Slow'
dictNodeTanType['7'] = listCmdsTanType[5] #'Fast'
dictNodeTanType['9'] = listCmdsTanType[6] #'Spline'
dictNodeTanType['10'] = listCmdsTanType[7] #'Clamped'
dictNodeTanType['16'] = listCmdsTanType[8] #'Plateau'
dictNodeTanType['17'] = listCmdsTanType[9] #'StepNext'
dictNodeTanType['18'] = listCmdsTanType[10] #'Auto'
#RANGE
curentRange = self.getRange()
middleRange = (curentRange[0] + curentRange[1]) / 2
offsetFrame = startFrame - curentRange[0]
#MATCH OBJ
objs = self.getObjs()
matchObjs = objs
if not (matchObjName == None):
matchObjs = self.getMatchObjs(matchObjName)
for i in range(len(self.objsAttrs)):
outObj, outAttr = self.objsAttrs[i].split('.')
objsAttr = outObj + '.' + outAttr
if (matchObjName):
iTmp = objs.index(outObj)
outObj = matchObjs[iTmp]
objsAttr = outObj + '.' + outAttr
if not (overrideNamespace == None):
if (':' in objsAttr):
if (overrideNamespace == ''):
objsAttr = objsAttr.split(':')[1]
else:
objsAttr = overrideNamespace + ':' + objsAttr.split(
':')[1]
else:
if not (overrideNamespace == ''):
objsAttr = overrideNamespace + ':' + objsAttr
if not (mc.objExists(objsAttr)):
print('animCurve - toObjs - ATTR DOESNT EXISTS - {}'.format(
objsAttr))
continue
if (objsToFilter) and not (outObj in objsToFilter): continue
if (replace):
inConnections = mc.listConnections(objsAttr, s=True, d=False)
if ('animCurve' in mc.nodeType(inConnections[0])):
mc.delete(inConnections[0])
inverseMult = 1
if (inverse):
inverseMult = -1
for j in range(len(self.values[i])):
time = (self.times[i][j] -
middleRange) * inverseMult + middleRange + offsetFrame
value = self.values[i][j]
#if( '.rotate' in objsAttr ):value = math.degrees(self.values[i][j])
if (mirror) and ('.translateX' in objsAttr):
value = self.values[i][j] * -1
if (mirror) and ('.translateY' in objsAttr):
value = self.values[i][j] * -1
if (mirror) and ('.translateZ' in objsAttr):
value = self.values[i][j] * -1
if (mirror) and ('TranslateX' in objsAttr):
value = self.values[i][j] * -1
if (mirror) and ('TranslateY' in objsAttr):
value = self.values[i][j] * -1
if (mirror) and ('TranslateZ' in objsAttr):
value = self.values[i][j] * -1
mc.setKeyframe(objsAttr, t=time, v=value)
if not (self.breakdown == []):
mc.setKeyframe(objsAttr,
e=True,
t=time,
v=value,
bd=self.breakdown[i][j])
if not (self.tInType == []):
mc.keyTangent(
objsAttr,
t=(time, time),
itt=dictNodeTanType['{}'.format(self.tInType[i][j])],
ott=dictNodeTanType['{}'.format(self.tOutType[i][j])],
ix=self.tInX[i][j],
iy=self.tInY[i][j],
ox=self.tOutX[i][j],
oy=self.tOutY[i][j],
l=self.tLock[i][j]) #, wl = self.tWeightLock[i][j] )
if not (self.others == []):
try:
mc.setInfinity(objsAttr,
pri=self.others[i][2],
poi=self.others[i][3])
except:
print('animCurve - toObjs - setInfinity issue - {}'.format(
objsAttr))
def rigRf():
# rig foot rolling
cmds.setDrivenKeyframe("footRoll_" + RFCHAIN[2] + ".rotateX",
currentDriver=RFCTRL + "." + ATTRLS[1][0])
cmds.setDrivenKeyframe("footRoll_" + RFCHAIN[3] + ".rotateX",
currentDriver=RFCTRL + "." + ATTRLS[1][0])
cmds.setDrivenKeyframe("footRoll_" + RFCHAIN[4] + ".rotateX",
currentDriver=RFCTRL + "." + ATTRLS[1][0])
# rig heel pivot
cmds.setDrivenKeyframe(RFCHAIN[2] + ".rotateX",
currentDriver=RFCTRL + "." + ATTRLS[2][0],
ott="spline",
itt="spline")
cmds.setDrivenKeyframe(RFCHAIN[2] + ".rotateX",
currentDriver=RFCTRL + "." + ATTRLS[2][0],
ott="spline",
itt="spline",
driverValue=1,
value=1)
cmds.selectKey(clear=True)
cmds.selectKey(RFCHAIN[2] + "_rotateX", keyframe=True, float=(0, 0))
cmds.setInfinity(poi="linear", pri="linear")
# rig heel slide
cmds.setDrivenKeyframe(RFCHAIN[2] + ".rotateY",
currentDriver=RFCTRL + "." + ATTRLS[3][0],
ott="spline",
itt="spline")
cmds.setDrivenKeyframe(RFCHAIN[2] + ".rotateY",
currentDriver=RFCTRL + "." + ATTRLS[3][0],
ott="spline",
itt="spline",
driverValue=1,
value=1)
cmds.selectKey(clear=True)
cmds.selectKey(RFCHAIN[2] + "_rotateY", keyframe=True, float=(0, 0))
cmds.setInfinity(poi="linear", pri="linear")
# rig toe pivot
cmds.setDrivenKeyframe(RFCHAIN[3] + ".rotateX",
currentDriver=RFCTRL + "." + ATTRLS[4][0],
ott="spline",
itt="spline")
cmds.setDrivenKeyframe(RFCHAIN[3] + ".rotateX",
currentDriver=RFCTRL + "." + ATTRLS[4][0],
ott="spline",
itt="spline",
driverValue=1,
value=1)
cmds.selectKey(clear=True)
cmds.selectKey(RFCHAIN[3] + "_rotateX", keyframe=True, float=(0, 0))
cmds.setInfinity(poi="linear", pri="linear")
# rig toe slide
cmds.setDrivenKeyframe(RFCHAIN[3] + ".rotateY",
currentDriver=RFCTRL + "." + ATTRLS[5][0],
ott="spline",
itt="spline")
cmds.setDrivenKeyframe(RFCHAIN[3] + ".rotateY",
currentDriver=RFCTRL + "." + ATTRLS[5][0],
ott="spline",
itt="spline",
driverValue=1,
value=1)
cmds.selectKey(clear=True)
cmds.selectKey(RFCHAIN[3] + "_rotateY", keyframe=True, float=(0, 0))
cmds.setInfinity(poi="linear", pri="linear")
# rig ball pivot
cmds.setDrivenKeyframe(RFCHAIN[4] + ".rotateX",
currentDriver=RFCTRL + "." + ATTRLS[6][0],
ott="spline",
itt="spline")
cmds.setDrivenKeyframe(RFCHAIN[4] + ".rotateX",
currentDriver=RFCTRL + "." + ATTRLS[6][0],
ott="spline",
itt="spline",
driverValue=1,
value=1)
cmds.selectKey(clear=True)
cmds.selectKey(RFCHAIN[4] + "_rotateX", keyframe=True, float=(0, 0))
cmds.setInfinity(poi="linear", pri="linear")
# rig ball slide
cmds.setDrivenKeyframe(RFCHAIN[4] + ".rotateY",
currentDriver=RFCTRL + "." + ATTRLS[7][0],
ott="spline",
itt="spline")
cmds.setDrivenKeyframe(RFCHAIN[4] + ".rotateY",
currentDriver=RFCTRL + "." + ATTRLS[7][0],
ott="spline",
itt="spline",
driverValue=1,
value=1)
cmds.selectKey(clear=True)
cmds.selectKey(RFCHAIN[4] + "_rotateY", keyframe=True, float=(0, 0))
cmds.setInfinity(poi="linear", pri="linear")
# rig banking
cmds.setDrivenKeyframe(RFCHAIN[0] + ".rotateZ",
currentDriver=RFCTRL + "." + ATTRLS[8][0])
cmds.setDrivenKeyframe(RFCHAIN[1] + ".rotateZ",
currentDriver=RFCTRL + "." + ATTRLS[8][0])
def rotationStart():
global asT
asT = cmds.playbackOptions(query=True, min=True) # Левая граница анимации
global aeT
aeT = cmds.playbackOptions(query=True, max=True) # Правая граница анимации
resetLoopTime()
global listObjects
listObjects = cmds.ls(sl=True) # Список трансформов
#||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
global listFixed
listFixed = listObjects[:]
for i in range(len(listFixed)):
listFixed[i] = listFixed[i].replace("|", "_")
#||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
global mainLayerName
mainLayerName = "OVERLAPPER" # Имя главного слоя
if (cmds.objExists(mainLayerName)):
print "\n||| OVERLAPPER start |||\n"
else:
cmds.animLayer(mainLayerName)
print "\n||| OVERLAPPER start ||| Layer created |||\n"
#||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
for i in range(len(listFixed)): # Основной цикл
if (i + 1 != len(listFixed)):
global zeroLoc
zeroLoc = listFixed[i] + "_base_loc" # Имя нулевого локатора
global aimLoc
aimLoc = listFixed[i] + "_aim_loc" # Имя следящего локатора
global tempLoc
tempLoc = listFixed[i] + "_temp_loc" # Имя физического локатора
global tempAimLoc
tempAimLoc = listFixed[i] + "_tempAim_loc" # Имя целевого локатора
global tempPart
tempPart = listFixed[i] + "_temp_part" # Имя частицы
global tempNucl
tempNucl = "nucleus1" # Имя физической ноды
global partRtype
partRtype = tempPart + "Shape.particleRenderType" # Обращение к типу отображения частицы
global partRrad
partRrad = tempPart + "Shape.radius" # Обращение к размеру частицы
global partRsm
partRsm = tempPart + "Shape.goalSmoothness" # Обращение к мягкости физики
global partRwe
partRwe = tempPart + "Shape.goalWeight[0]" # Обращение к весу ноды
global partNucl
partNucl = tempNucl + ".timeScale" # Обращение к скейлу времени физ ноды
global nuclStart
nuclStart = tempNucl + ".startFrame" # Обращение к старту симуляции физ ноды
#||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
cmds.spaceLocator(n=zeroLoc) # Создаём нулевой локатор
cmds.spaceLocator(n=aimLoc) # Создаём следящий локатор
cmds.spaceLocator(n=tempLoc) # Создаём физический локатор
cmds.matchTransform(
zeroLoc, listObjects[i], pos=True
) # Перемещаем нулевой локатор в пивот главного объекта
cmds.matchTransform(
tempLoc, listObjects[i + 1], pos=True
) # Перемещаем физический локатор в пивот целевого объекта
cmds.select(tempLoc, r=True) # Выделяем физический локатор
cmds.duplicate(
n=tempAimLoc) # Дублируем его и создаём целевой локатор
cmds.select(listObjects[0], r=True) # Выделяем главный объект
cmds.select(zeroLoc, add=True) # Выделяем нулевой локатор
cmds.parentConstraint(mo=True, w=1) # Создаём пэрент констрейн
cmds.select(aimLoc, r=True) # Выделяем следящий локатор
cmds.select(zeroLoc, add=True) # Выделяем нулевой локатор
cmds.parent(r=True) # Создаём иерархию
cmds.select(listObjects[1], r=True) # Выделяем целевой объект
cmds.select(tempLoc, add=True) # Выделяем физический локатор
cmds.parentConstraint(mo=True, sr=["x", "y", "z"],
w=1) # Создаём позиционный констрейн
aimPosName = tempLoc + ".translate" # Обращение к позиции физического локатора
partCenter = tempPart + ".center" # Обращение к центру частицы
aimLocPos = tempAimLoc + ".translate" # Обращение к позиции целевого локатора
aimPos = cmds.getAttr(
aimPosName) # Берём позицию физического локатора
cmds.nParticle(p=aimPos, n=tempPart,
c=1) # Создаём частицу в целевой позиции
cmds.goal(
tempPart, w=0.5, utr=1,
g=tempLoc) # Создаём физическую связь с физическим локатором
cmds.connectAttr(partCenter, aimLocPos,
f=True) # Привязываем целевой локатор к частице
cmds.select(tempAimLoc, r=True) # Выделяем целевой локатор
cmds.select(aimLoc, add=True) # Выделяем следящий локатор
cmds.aimConstraint(w=1,
aim=(0, 1, 0),
u=(0, 1, 0),
wut="vector",
wu=(0, 1, 0),
sk="y") # Создаём аим констреён по двум осям
#||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
cmds.setAttr(partRtype, pShape)
cmds.setAttr(partRrad, pRad)
cmds.setAttr(partRsm, goalSmoothRot)
cmds.setAttr(partRwe, goalWRot)
cmds.setAttr(partNucl, timeScaleRot)
cmds.setAttr(nuclStart, asT)
#||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
global minLoopTime
minLoopTime = aeT * -2
global maxLoopTime
maxLoopTime = aeT * 2
if (cycleRot):
cmds.setAttr(nuclStart, minLoopTime)
cmds.bakeResults(
zeroLoc, t=(asT, aeT), sm=True,
at=("translate",
"rotate")) # Запекание нулевого локатора для цикла
cmds.bakeResults(
aimLoc, t=(minLoopTime, maxLoopTime), sm=True,
at="rotate") # Запекание аим локатора для цикла
cmds.delete(tempAimLoc, tempLoc, tempPart,
tempNucl) # Удаляем объекты физики
zeroParent = zeroLoc + "_parentConstraint1"
cmds.delete(zeroParent)
setTimeToMin()
cmds.select(aimLoc,
r=True) # Выделяем аим локатор как родителя
cmds.select(listObjects[i],
add=True) # Выделяем объект как подчиненного
cmds.parentConstraint(mo=True, st=["x", "y", "z"],
w=1) # Создаём ротэйт констрейн
resetLoopTime()
else:
cmds.bakeResults(
zeroLoc, t=(asT, aeT), sm=True,
at=("translate", "rotate"
)) # Запекание нулевого локатора для линейной анимации
cmds.bakeResults(
aimLoc, t=(asT, aeT), sm=True, at="rotate"
) # Запекание аим локатора для линейной анимации
cmds.delete(tempAimLoc, tempLoc, tempPart,
tempNucl) # Удаляем объекты физики
zeroParent = zeroLoc + "_parentConstraint1"
cmds.delete(zeroParent)
resetLoopTime()
cmds.select(aimLoc,
r=True) # Выделяем аим локатор как родителя
cmds.select(listObjects[i],
add=True) # Выделяем объект как подчиненного
cmds.parentConstraint(mo=True, st=["x", "y", "z"],
w=1) # Создаём ротэйт констрейн
#||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
layerBase = "rotate_" # Имя базы слоя
layerName = layerBase + listFixed[i] # Имя слоя
layerComp = listFixed[i] + '_layer_{0}'.format(
"0") # Имя компонента слоя
if (cmds.objExists(layerName)):
cmds.bakeResults(listObjects[i],
t=(asT, aeT),
sm=True,
bol=True,
at="rotate") # Запекаем объект в слой
cmds.select(listObjects[i], r=True)
cmds.setInfinity(pri="cycle", poi="cycle")
cmds.delete(aimLoc, zeroLoc) # Удаляем объекты скрипта
cmds.container("BakeResultsContainer", e=True,
rc=True) # Удаляем контейнер
cmds.animLayer(
"BakeResults", e=True, p=layerName
) # Переносим слой с анимацией в основной слой объекта
cmds.rename("BakeResults", layerComp) # Переименовываем слой
resetLoopTime()
else:
cmds.animLayer(
layerName
) # Создаём пустой слой для всех оверлапов объекта
cmds.animLayer(
layerName, e=True,
p=mainLayerName) # Переносим базу слоя в главный слой
cmds.bakeResults(listObjects[i],
t=(asT, aeT),
sm=True,
bol=True,
at="rotate") # Запекаем объект в слой
cmds.select(listObjects[i], r=True)
cmds.setInfinity(pri="cycle", poi="cycle")
cmds.delete(aimLoc, zeroLoc) # Удаляем объекты скрипта
cmds.container("BakeResultsContainer", e=True,
rc=True) # Удаляем контейнер
cmds.animLayer(
"BakeResults", e=True, p=layerName
) # Переносим слой с анимацией в основной слой объекта
cmds.rename("BakeResults", layerComp) # Переименовываем слой
resetLoopTime()
cmds.select(d=True) # Деселект
for l in listObjects:
cmds.select(l, add=True)
print "\n||| OVERLAPPER end |||\n"
def build( startJoint=None, middleJoint=None, endJoint=None, extraJoint=None, side=None, name=None, twistJointCount=None, isLeg=False, cleanUp=True ):
if not startJoint or not middleJoint or not endJoint or not extraJoint or not side or not name or not twistJointCount:
print 'limb: Error! Must supply all arguments.'
return
# first reconstruct the joints for our system
joint1 = cmds.createNode( 'joint', n=side+"_"+name+'_start_drvJnt' )
joint2 = cmds.createNode( 'joint', n=side+"_"+name+'_middle_drvJnt' )
joint3 = cmds.createNode( 'joint', n=side+"_"+name+'_end_jnt' )
joint4 = cmds.createNode( 'joint', n=side+"_"+name+'_extra_drvJnt' )
common.align( node=joint1, target=startJoint )
cmds.setAttr('%s.jointOrient' % joint1, 0,0,0)
common.align( node=joint2, target=middleJoint )
cmds.setAttr('%s.jointOrient' % joint2, 0,0,0)
common.align( node=joint3, target=endJoint )
cmds.setAttr('%s.jointOrient' % joint3, 0,0,0)
common.align( node=joint4, target=extraJoint )
cmds.setAttr('%s.jointOrient' % joint4, 0,0,0)
cmds.parent( joint4, joint3 )
cmds.parent( joint3, joint2 )
cmds.parent( joint2, joint1 )
if isLeg: cmds.setAttr( joint2+'.preferredAngle', 0, 0, -90 )
else: cmds.setAttr( joint2+'.preferredAngle', 0, -90, 0 )
cmds.makeIdentity( joint1, apply=True )
# auto color controls using the 'side' argument
myColor = 'green'
if side == 'lf': myColor = 'blue'
elif side == 'rt': myColor = 'red'
# creation of the start control (shoulder or hips offset)
limbStartCtrl = controls.Control( side=side, rigPart='limb', function=name+'_start', nodeType='ctrl', size=0.4, color=myColor, aimAxis='y' )
limbStartCtrl.pinCtrl()
common.align( node=limbStartCtrl.control, target=joint1, orient=False )
limbStartCtrlGrp = common.insertGroup( node=limbStartCtrl.control )
# creation of the end control (hand or foot)
limbEndCtrl = controls.Control( side=side, rigPart='limb', function=name+'_end', nodeType='ctrl', size=0.4 + 0.2*isLeg, color=myColor, aimAxis='x' )
limbEndCtrl.cubeCtrl()
common.align( node=limbEndCtrl.control, target=joint3, orient=False )
limbEndCtrlGrp = common.insertGroup( node=limbEndCtrl.control )
# entire system group
systemGrp = cmds.group( empty=True, n=side+'_'+name+'_xform_grp')
cmds.parent( joint1, systemGrp )
#
# NON ROLLs CREATION
#
startNonRoll = nonRoll.build(joint=joint1, name = name+'Start')
cmds.parent(startNonRoll['main_grp'], systemGrp)
upNonRoll = nonRoll.build(joint=joint2, name = name+'Mid')
cmds.parent(upNonRoll['main_grp'], joint1)
lowNonRoll = nonRoll.build(joint=joint3, name = name+'End')
cmds.parent(lowNonRoll['main_grp'], joint2)
'''
if isLeg:
if side == 'lf': aimUp = (0, 1, 0)
elif side == 'rt': aimUp = (0, -1, 0)
cmds.aimConstraint( lowNonRollEnd, lowNonRollLoc, aimVector=aimVec, upVector=aimUp, worldUpType='objectrotation', worldUpVector=aimWorldUp, worldUpObject=joint3 )
if isLeg:
common.align( node=lowNonRollLocGrp, target=joint3 )
else:
common.align( node=lowNonRollLocGrp, target=joint2 )
common.align( node=lowNonRollLocGrp, target=joint3, orient=False )
cmds.setAttr( lowNonRollGrp+'.v', 0 )
cmds.setAttr( lowTwistIkHandle+'.poleVector', 0, 0, 0 )
if not isLeg:
if side == 'rt': cmds.setAttr( lowNonRollLocGrp+'.r', 0, 0, 0 )
else:
if side == 'lf': cmds.setAttr( lowNonRollLocGrp+'.r', 90, 0, 0 )
'''
# create stretch setup
ssStartPos = cmds.group( empty=True, n=side+'_'+name+'_stretchStart_loc')
ssEndPos = cmds.group( empty=True, n=side+'_'+name+'_stretchEnd_loc')
common.align( node=ssStartPos, target=joint1, orient=False )
cmds.pointConstraint( limbEndCtrl.control, ssEndPos )
ssGrp = cmds.group( ssStartPos, ssEndPos, n=side+'_'+name+'_stretchLocs_grp')
cmds.parent( ssGrp, systemGrp )
# sums the two separate distances to create the stretch
originalUpLimbTx = cmds.getAttr( joint2+'.translateX' )
originalLowLimbTx = cmds.getAttr( joint3+'.translateX' )
limbSize = common.getDistance( joint1, joint2 ) + common.getDistance( joint2, joint3 )
dbNode = cmds.createNode( 'distanceBetween', n=side+'_'+name+'_stretch_distance')
cmds.connectAttr( ssStartPos+'.t', dbNode+'.point1' )
cmds.connectAttr( ssEndPos+'.t', dbNode+'.point2' )
# creates a keyframe-based stretch factor
ssKeyUp = cmds.createNode( 'animCurveUL', n=side+'_'+name+'_upStretch_key' )
cmds.connectAttr( dbNode+'.distance', ssKeyUp+'.input' )
cmds.connectAttr( ssKeyUp+'.output', joint2+'.translateX' )
ssKeyLow = cmds.createNode( 'animCurveUL', n=side+'_'+name+'_LowStretch_key' )
cmds.connectAttr( dbNode+'.distance', ssKeyLow+'.input' )
cmds.connectAttr( ssKeyLow+'.output', joint3+'.translateX' )
# set driven key values
cmds.setDrivenKeyframe( joint2+'.translateX', currentDriver=dbNode+'.distance', driverValue=limbSize, value=originalUpLimbTx, itt='linear', ott='linear' )
cmds.setDrivenKeyframe( joint2+'.translateX', currentDriver=dbNode+'.distance', driverValue=limbSize*2, value=originalUpLimbTx*2, itt='linear', ott='spline' )
cmds.setInfinity( joint2+'.translateX', poi='linear' )
cmds.setDrivenKeyframe( joint3+'.translateX', currentDriver=dbNode+'.distance', driverValue=limbSize, value=originalLowLimbTx, itt='linear', ott='linear' )
cmds.setDrivenKeyframe( joint3+'.translateX', currentDriver=dbNode+'.distance', driverValue=limbSize*2, value=originalLowLimbTx*2, itt='linear', ott='spline' )
cmds.setInfinity( joint3+'.translateX', poi='linear' )
# create the twistSections
twistUp = 'z'
if isLeg: twistUp = 'y'
doNotInvertUp = False
if isLeg and side == 'rt': doNotInvertUp = True
upTwistDict = twistSection.build( side=side, name='up_'+name, startPos=joint1, endPos=joint2, jointCount=twistJointCount, worldUpVector=twistUp, worldUpObject=startNonRoll['nonRoll'], twistReader=startNonRoll['info'], doNotInvertUp=doNotInvertUp )
lowTwistDict = twistSection.build( side=side, name='low_'+name, startPos=joint2, endPos=joint3, jointCount=twistJointCount, worldUpVector=twistUp, worldUpObject=upNonRoll['nonRoll'], twistReader=lowNonRoll['info'], doNotInvertUp=doNotInvertUp )
# create the joints that will skin the twistSection curves
# to get that nice bendy effect for free
# start with the shoulder/hips joint
mdNode = None
crvJntA1 = cmds.createNode( 'joint', n=side+'_'+name+'_up_curve_1_jnt')
crvJntA2 = cmds.createNode( 'joint', n=side+'_'+name+'_up_curve_2_jnt')
cmds.parent( crvJntA2, crvJntA1 )
cmds.parent( crvJntA1, systemGrp )
cmds.addAttr( limbEndCtrl.control, ln='start_tangent', min=0, dv=0.1, k=True )
if side == 'lf':
cmds.connectAttr( limbEndCtrl.control+'.start_tangent', crvJntA2+'.translateX' )
else:
mdNode = cmds.createNode( 'multiplyDivide', n=side+'_'+name+'_pma' )
cmds.setAttr( mdNode+'.input2', -1, -1, -1 )
cmds.connectAttr( limbEndCtrl.control+'.start_tangent', mdNode+'.input1X' )
cmds.connectAttr( mdNode+'.outputX', crvJntA2+'.translateX' )
common.align( node=crvJntA1, target=joint1 )
# elbow/knee joints
avgGrp = cmds.group( empty=True, n=side+'_'+name+'_avg_grp' )
crvJntB1 = cmds.createNode( 'joint', n=side+'_'+name+'_cn_curve_1_avgJnt')
crvJntB2 = cmds.createNode( 'joint', n=side+'_'+name+'_cn_curve_2_avgJnt')
cmds.parent( crvJntB2, crvJntB1 )
cmds.parent( crvJntB1, avgGrp )
cmds.setAttr( crvJntB1+'.rotateY', 180 ) # flip
crvJntC1 = cmds.createNode( 'joint', n=side+'_'+name+'_cn_curve_3_avgJnt')
crvJntC2 = cmds.createNode( 'joint', n=side+'_'+name+'_cn_curve_4_avgJnt')
cmds.parent( crvJntC2, crvJntC1 )
cmds.parent( crvJntC1, avgGrp )
cmds.addAttr( limbEndCtrl.control, ln='bend_tangent', min=0, dv=0.85, k=True )
if mdNode:
cmds.connectAttr( limbEndCtrl.control+'.bend_tangent', mdNode+'.input1Y' )
cmds.connectAttr( mdNode+'.outputY', crvJntB2+'.translateX' )
cmds.connectAttr( mdNode+'.outputY', crvJntC2+'.translateX' )
else:
cmds.connectAttr( limbEndCtrl.control+'.bend_tangent', crvJntB2+'.translateX' )
cmds.connectAttr( limbEndCtrl.control+'.bend_tangent', crvJntC2+'.translateX' )
cmds.pointConstraint( joint2, avgGrp )
cons = cmds.orientConstraint( joint1, joint2, avgGrp )[0]
cmds.setAttr( cons+'.interpType', 0 ) # noFlip
# wrist/foot joints
crvJntD1 = cmds.createNode( 'joint', n=side+'_'+name+'_low_curve_1_jnt')
crvJntD2 = cmds.createNode( 'joint', n=side+'_'+name+'_low_curve_2_jnt')
crvJntD1Grp = cmds.group( crvJntD1, n=crvJntD1+'_grp' )
cmds.parent( crvJntD2, crvJntD1 )
cmds.parent( crvJntD1Grp, systemGrp )
cmds.setAttr( crvJntD1+'.rotateY', 180 ) # flip
common.align( node=crvJntD1Grp, target=joint3 )
cmds.parentConstraint( limbEndCtrl.control, crvJntD1Grp, mo=True )
cmds.addAttr( limbEndCtrl.control, ln='end_tangent', min=0, dv=0.2, k=True )
if mdNode:
cmds.connectAttr( limbEndCtrl.control+'.end_tangent', mdNode+'.input1Z' )
cmds.connectAttr( mdNode+'.outputZ', crvJntD2+'.translateX' )
else:
cmds.connectAttr( limbEndCtrl.control+'.end_tangent', crvJntD2+'.translateX' )
# extra jnt follow orientation of endCtrl
cmds.orientConstraint( limbEndCtrl.control, joint3, mo=True )
# constrains entire limb to startCtrl
cmds.orientConstraint( limbStartCtrl.control, startNonRoll['main_grp'], mo=True )
# skin the twistSection curves to these joints
skinClsUp = cmds.skinCluster( crvJntA1, crvJntA2, crvJntB1, crvJntB2, upTwistDict['twist_curve'] )[0]
cmds.skinPercent( skinClsUp, upTwistDict['twist_curve']+'.cv[0]', transformValue=[(crvJntA1, 1)])
cmds.skinPercent( skinClsUp, upTwistDict['twist_curve']+'.cv[1]', transformValue=[(crvJntA2, 1)])
cmds.skinPercent( skinClsUp, upTwistDict['twist_curve']+'.cv[2]', transformValue=[(crvJntB2, 1)])
cmds.skinPercent( skinClsUp, upTwistDict['twist_curve']+'.cv[3]', transformValue=[(crvJntB1, 1)])
skinClsLow = cmds.skinCluster( crvJntC1, crvJntC2, crvJntD1, crvJntD2, lowTwistDict['twist_curve'] )[0]
cmds.skinPercent( skinClsLow, lowTwistDict['twist_curve']+'.cv[0]', transformValue=[(crvJntC1, 1)])
cmds.skinPercent( skinClsLow, lowTwistDict['twist_curve']+'.cv[1]', transformValue=[(crvJntC2, 1)])
cmds.skinPercent( skinClsLow, lowTwistDict['twist_curve']+'.cv[2]', transformValue=[(crvJntD2, 1)])
cmds.skinPercent( skinClsLow, lowTwistDict['twist_curve']+'.cv[3]', transformValue=[(crvJntD1, 1)])
#
# IKHANDLE CREATION
#
ikHandle, effector = cmds.ikHandle( startJoint=joint1, endEffector=joint3, solver='ikRPsolver', n=side+'_'+name+'_ikHandle' )
pvCtrl = controls.Control( side=side, rigPart=name, function='poleVec', nodeType="ctrl", size=0.3, color=myColor, aimAxis="twistAxis" )
pvCtrl.cubeCtrl()
# snaps the poleVector control to the middle joint
common.align( node=pvCtrl.control, target=joint2, orient=False )
pvCtrlGrp = common.insertGroup( node=pvCtrl.control )
cmds.poleVectorConstraint( pvCtrl.control, ikHandle )
cmds.setAttr( pvCtrl.control+'.tz', -5 )
# invert poleVector position if it's a leg
if isLeg:
cmds.setAttr( pvCtrl.control+'.tz', 5 )
# auto follow foot control
cmds.pointConstraint( limbEndCtrl.control, pvCtrlGrp, mo=True )
cmds.orientConstraint( limbEndCtrl.control, pvCtrlGrp, skip=['x'], mo=True )
# ikHandle follow endCtrl
cmds.pointConstraint( limbEndCtrl.control, ikHandle )
# extra attributes to endCtrl
cmds.addAttr( limbEndCtrl.control, ln='twist', k=True )
cmds.connectAttr( limbEndCtrl.control+'.twist', ikHandle+'.twist' )
## ik lock
# add attribute to control
if ( cmds.attributeQuery( 'lock', node=limbEndCtrl.control, exists=True ) ) == True:
print( 'Attribute %s already exists on %s.' % ( 'lock', limbEndCtrl ) )
else:
cmds.addAttr( limbEndCtrl.control, longName='lock', attributeType='float', keyable=True, min=0.0, max=1.0, dv=0.0 )
# create distance locs
startLoc = cmds.spaceLocator( name=side + '_' + name + '_start_loc' )[0]
middleLoc = cmds.spaceLocator( name=side + '_' + name + '_middle_loc' )[0]
endLoc = cmds.spaceLocator( name=side + '_' + name + '_end_loc' )[0]
upDist = cmds.createNode( 'distanceDimShape' )
lowDist = cmds.createNode( 'distanceDimShape' )
cmds.connectAttr( cmds.listRelatives(startLoc)[0] + '.worldPosition[0]', upDist + '.startPoint' )
cmds.connectAttr( cmds.listRelatives(middleLoc)[0] + '.worldPosition[0]', upDist + '.endPoint' )
cmds.connectAttr( cmds.listRelatives(middleLoc)[0] + '.worldPosition[0]', lowDist + '.startPoint' )
cmds.connectAttr( cmds.listRelatives(endLoc)[0] + '.worldPosition[0]', lowDist + '.endPoint' )
cmds.pointConstraint( limbStartCtrl.control, startLoc )
cmds.pointConstraint( pvCtrl.control, middleLoc )
cmds.pointConstraint( limbEndCtrl.control, endLoc )
# create and connect blend utilities
bl2aLockUp = cmds.shadingNode( 'blendTwoAttr', asUtility=True )
bl2aLockUp = cmds.rename(bl2aLockUp, common.getName(node=bl2aLockUp, side=side, rigPart=name, function='lock_up', nodeType='bl2a'))
bl2aLockLow = cmds.shadingNode( 'blendTwoAttr', asUtility=True )
bl2aLockLow = cmds.rename(bl2aLockLow, common.getName(node=bl2aLockLow, side=side, rigPart=name, function='lock_low', nodeType='bl2a'))
cmds.connectAttr( ssKeyUp+'.output', bl2aLockUp + '.input[0]' )
cmds.connectAttr( upDist + '.distance', bl2aLockUp + '.input[1]' )
cmds.connectAttr( limbEndCtrl.control + '.lock', bl2aLockUp + '.attributesBlender' )
cmds.connectAttr( bl2aLockUp + '.output', joint2 + '.translateX', force = True )
cmds.connectAttr( ssKeyLow+'.output', bl2aLockLow + '.input[0]' )
cmds.connectAttr( lowDist + '.distance', bl2aLockLow + '.input[1]' )
cmds.connectAttr( limbEndCtrl.control + '.lock', bl2aLockLow + '.attributesBlender' )
cmds.connectAttr( bl2aLockLow + '.output', joint3 + '.translateX', force = True )
# get distance nodes transforms and rename
upDist = cmds.listRelatives( upDist, parent=True )[0]
upDist = cmds.rename( upDist, common.getName(node=upDist, side=side, rigPart=name, function='up', nodeType='distance') )
lowDist = cmds.listRelatives( lowDist, parent=True )[0]
lowDist = cmds.rename( lowDist, common.getName(node=lowDist, side=side, rigPart=name, function='low', nodeType='distance') )
# negate distance output if side = rt
if side == 'rt':
mdivLockRev = cmds.shadingNode( 'multiplyDivide', asUtility=True)
mdivLockRev = cmds.rename( mdivLockRev, common.getName(node=mdivLockRev, side=side, rigPart=name, function='lock_dist_rev', nodeType='mdiv') )
cmds.setAttr( mdivLockRev + '.input2', -1, -1, -1 )
cmds.connectAttr( upDist + '.distance', mdivLockRev + '.input1X', force=True )
cmds.connectAttr( mdivLockRev + '.outputX', bl2aLockUp + '.input[1]', force=True )
cmds.connectAttr( lowDist + '.distance', mdivLockRev + '.input1Y', force=True )
cmds.connectAttr( mdivLockRev + '.outputY', bl2aLockLow + '.input[1]', force=True )
# group lock utilities
lockGrp = cmds.group( startLoc, middleLoc, endLoc, upDist, lowDist, name=side + '_' + name + '_lock_grp' )
#
# CLEAN UP
#
# hide objects
if cleanUp:
cmds.setAttr( ikHandle+'.v', 0 )
cmds.parent( ikHandle, limbEndCtrl.control )
cmds.setAttr( lowTwistDict['twist_curve']+'.inheritsTransform', 0 )
cmds.setAttr( upTwistDict['twist_curve']+'.inheritsTransform', 0 )
for mp in cmds.listRelatives( lowTwistDict['motionPaths_group'] ) + cmds.listRelatives( upTwistDict['motionPaths_group'] ):
cmds.setAttr( mp+'.inheritsTransform', 0 )
if isLeg: cmds.setAttr( limbStartCtrl.control+'.v', 0 ) # hides first control of the leg
# parenting everything under one group
cmds.parent( limbStartCtrlGrp, limbEndCtrlGrp, pvCtrlGrp, systemGrp ) # ctrls
hideGrp = cmds.group( joint1, startNonRoll['main_grp'], ssGrp, lockGrp, crvJntA1, crvJntD1Grp, lowTwistDict['twist_curve'], upTwistDict['twist_curve'], avgGrp, lowTwistDict['motionPaths_group'], upTwistDict['motionPaths_group'], upTwistDict['joints_group'], lowTwistDict['joints_group'], name=systemGrp.replace('_grp', '_hide_grp'), parent=systemGrp )
cmds.setAttr( hideGrp+'.v', 0 )
cmds.parentConstraint( limbStartCtrl.control, hideGrp, mo=True )
# lock and hide attributes
cmds.setAttr( limbStartCtrl.control + '.sx', lock=True, keyable=False, channelBox=False )
cmds.setAttr( limbStartCtrl.control + '.sy', lock=True, keyable=False, channelBox=False )
cmds.setAttr( limbStartCtrl.control + '.sz', lock=True, keyable=False, channelBox=False )
cmds.setAttr( limbStartCtrl.control + '.visibility', lock=True, keyable=False, channelBox=False )
cmds.setAttr( pvCtrl.control + '.rx', lock=True, keyable=False, channelBox=False )
cmds.setAttr( pvCtrl.control + '.ry', lock=True, keyable=False, channelBox=False )
cmds.setAttr( pvCtrl.control + '.rz', lock=True, keyable=False, channelBox=False )
cmds.setAttr( pvCtrl.control + '.sx', lock=True, keyable=False, channelBox=False )
cmds.setAttr( pvCtrl.control + '.sy', lock=True, keyable=False, channelBox=False )
cmds.setAttr( pvCtrl.control + '.sz', lock=True, keyable=False, channelBox=False )
cmds.setAttr( pvCtrl.control + '.visibility', lock=True, keyable=False, channelBox=False )
cmds.setAttr( limbEndCtrl.control + '.visibility', lock=True, keyable=False, channelBox=False )
cmds.setAttr( limbEndCtrl.control + '.sx', lock=True, keyable=False, channelBox=False )
cmds.setAttr( limbEndCtrl.control + '.sy', lock=True, keyable=False, channelBox=False )
cmds.setAttr( limbEndCtrl.control + '.sz', lock=True, keyable=False, channelBox=False )
returnDic = { 'ikHandle' : ikHandle,
'jointList' : [ joint1, joint2, joint3, joint4 ],
'poleVector' : pvCtrl,
'poleVector_grp' : pvCtrlGrp,
'start_ctrl' : limbStartCtrl.control,
'end_ctrl' : limbEndCtrl.control,
'end_ctrl_grp' : limbEndCtrlGrp,
'skinJoints_group' : [ upTwistDict['joints_group'], lowTwistDict['joints_group'] ],
'limbSystem_grp' : systemGrp,
'stretch_positions': [ ssStartPos, ssEndPos ]
}
return returnDic