def createShaderFromConfig(cls, shaderConfig):
"""create a shader and engine if not already available"""
if not cls.shaderExistsInScene(shaderConfig):
shader = cmds.shadingNode(
shaderConfig['type'],
name=shaderConfig['uid'],
asShader=True)
cmds.setAttr(shader + '.color', *shaderConfig['color'], type='double3')
if 'transparency' in shaderConfig:
cmds.setAttr(
shader + '.transparency',
*shaderConfig['transparency'], type='double3')
shaderEngine = cmds.sets(
renderable=True,
noSurfaceShader=True,
empty=True,
name=shader + '_SG')
cmds.connectAttr(shader + '.outColor', shaderEngine + '.surfaceShader')
else:
shader = shaderConfig['uid']
engines = cmds.listConnections(shader + '.outColor')
if engines:
shaderEngine = engines[0]
else:
shaderEngine = cmds.sets(
renderable=True,
noSurfaceShader=True,
empty=True,
name=shader + '_SG')
cmds.connectAttr(shader + '.outColor', shaderEngine + '.surfaceShader')
return shader, shaderEngine
def getTrackManagerNode(cls, trackSetNode =None, createIfMissing =False):
""" Returns the name of the track manager nodeName for the current
Cadence scene.
trackSetNode: The track set nodeName on which to find the track
manager nodeName. If no nodeName is specified the method will look
it up internally.
createIfMissing: If true and no track manager nodeName is found one
will be created and connected to the track set nodeName, which will
also be created if one does not exist. """
if not trackSetNode:
trackSetNode = cls.getTrackSetNode(createIfMissing=createIfMissing)
connects = cmds.listConnections(
trackSetNode + '.usedBy',
source=True,
destination=False)
if connects:
for node in connects:
if cmds.nodeType(node) == 'trackManager':
return node
if createIfMissing:
node = cmds.createNode('trackManager')
cmds.connectAttr(
node + '.trackSet', trackSetNode + '.usedBy', force=True)
return node
return None
def create(self):
#checking if shader exists
shadExist = 0
allShaders = cmds.ls(mat=1)
for shadeCheck in allShaders:
if (shadeCheck == self.name):
shadExist = 1
if (shadExist == 0):
cmds.sets(renderable=True,
noSurfaceShader=True,
empty=True,
name=self.name + "SG")
cmds.shadingNode(self.type, asShader=True, name=self.name)
# 0.0, 0.8, 1.0 color
cmds.setAttr(self.name + ".color",
self.color[0],
self.color[1],
self.color[2],
type='double3')
#transparency between 0.8 - 0.9 is good
cmds.setAttr(self.name + ".transparency",
self.trans[0],
self.trans[1],
self.trans[2],
type="double3")
cmds.setAttr(self.name + ".specularColor",
self.specClr[0],
self.specClr[1],
self.specClr[2],
type='double3')
cmds.connectAttr(self.name + ".outColor",
self.name + "SG.surfaceShader",
f=True)
def _makeMolecule(self):
#H2O
O = cmds.polySphere(r=1, n='O', ax = [0,0,0]);
H1 = cmds.polySphere(r=0.8, n='H1', ax=[0,0,0]);
H2 = cmds.polySphere(r=0.8, n='H2', ax=[0,0,0]);
cmds.move(0.0,0.0,1,H1, r=True)
cmds.move(0.0,0.0,-1,H2, r=True)
cmds.xform(H1, piv=[0,0,0], ws=True)
cmds.xform(H2, piv=[0,0,0], ws=True)
cmds.rotate(0,'60',0, H1);
#group O, H1, H2 as a water molecule
H2O = cmds.group( empty=True, name='H2O' )
cmds.parent(H1,H2,O,H2O)
#paint on colors for the water molecule
#create red lambert
cmds.sets( renderable=True, noSurfaceShader=True, empty=True, name='O_WhiteSG' )
cmds.shadingNode( 'lambert', asShader=True, name='O_White' )
cmds.setAttr( 'O_White.color', 1, 1, 1, type='double3')
cmds.connectAttr('O_White.outColor', 'O_WhiteSG.surfaceShader')
#create red lambert
cmds.sets( renderable=True, noSurfaceShader=True, empty=True, name='H_RedSG' )
cmds.shadingNode( 'lambert', asShader=True, name='H_Red' )
cmds.setAttr( 'H_Red.color', 1, 0, 0, type='double3')
cmds.connectAttr('H_Red.outColor', 'H_RedSG.surfaceShader')
#assign the material
cmds.sets('H1', edit=True, forceElement='H_RedSG')
cmds.sets('H2', edit=True, forceElement='H_RedSG')
cmds.sets('O', edit=True, forceElement='O_WhiteSG')
return H2O
def remove(cls):
prints = cls.getTargets(1)
if not prints:
return False
for p in prints:
if not cmds.attributeQuery(cls._PREVIOUS_PRINT_ATTR, node=p, exists=True):
print 'UNRECOGNIZED ITEM: "%s" is not a valid footprint and has been skipped.' % p
continue
nexts = cls.getNext(p)
for c in nexts:
cmds.disconnectAttr(p + '.message', c + '.' + cls._PREVIOUS_PRINT_ATTR)
prevs = cls.getPrevious(p)
for c in prevs:
try:
cmds.disconnectAttr(c + '.message', p + '.' + cls._PREVIOUS_PRINT_ATTR)
except Exception, err:
print 'DISCONNECT FAILURE | Unable to disconnect'
print '\tTarget:', str(p) + '.' + cls._PREVIOUS_PRINT_ATTR
print '\tSource:', str(c) + '.message'
raise
cmds.deleteAttr(p + '.' + cls._PREVIOUS_PRINT_ATTR)
cmds.connectAttr(
prevs[0] + '.message',
nexts[0] + '.' + cls._PREVIOUS_PRINT_ATTR,
force=True
)
def __init__(self, name, r, g, b):
AA = mc.shadingNode('phong', asShader=True, n=name + '_AA')
self.AASG = mc.sets(r=True, nss=True, em=True, n=name + '_AASG')
mc.connectAttr(AA + '.outColor', self.AASG + '.surfaceShader')
mc.setAttr(AA + '.color', r, g, b, type='double3')
mc.setAttr(AA + '.cosinePower', 2)
mc.setAttr(AA + '.specularColor', r, g, b, type='double3')
mc.setAttr(AA + '.reflectivity', 0.2)
def __init__(self, name, r, g, b):
### blue fine metallic
FM = mc.shadingNode('phong', asShader=True, n=name + 'FM')
self.FMSG = mc.sets(r=True, nss=True, em=True, n=name + 'FMSG')
mc.connectAttr(FM + '.outColor', self.FMSG + '.surfaceShader')
mc.setAttr(FM + '.color', r, g, b, type='double3')
mc.setAttr(FM + '.cosinePower', 20)
mc.setAttr(FM + '.specularColor', r, g, b, type='double3')
mc.setAttr(FM + '.reflectivity', 0.8)
def whiteAnodizedAluminum():
### white anodized aluminum
global whiteAASG
whiteAA = mc.shadingNode('phong', asShader=True, n='whiteAA')
whiteAASG = mc.sets(r=True, nss=True, em=True, n='whiteAASG')
mc.connectAttr(whiteAA + '.outColor', whiteAASG + '.surfaceShader')
mc.setAttr(whiteAA + '.color', 0.9, 0.9, 0.9, type='double3')
mc.setAttr(whiteAA + '.cosinePower', 2)
mc.setAttr(whiteAA + '.specularColor', 0.9, 0.9, 0.9, type='double3')
mc.setAttr(whiteAA + '.reflectivity', 0.2)
def redFineMettalic():
### red fine metallic
global redFMSG
redFM = mc.shadingNode('phong', asShader=True, n='redFM')
redFMSG = mc.sets(r=True, nss=True, em=True, n='redFMSG')
mc.connectAttr(redFM + '.outColor', redFMSG + '.surfaceShader')
mc.setAttr(redFM + '.color', 0.5, 0.0395, 0.0395, type='double3')
mc.setAttr(redFM + '.cosinePower', 20)
mc.setAttr(redFM + '.specularColor', 0.5, 0.0395, 0.0395, type='double3')
mc.setAttr(redFM + '.reflectivity', 0.8)
def blueAnodizedAluminum():
### blue Anodized aluminum
global blueAASG
blueAA = mc.shadingNode('phong', asShader=True, n='blueAA')
blueAASG = mc.sets(r=True, nss=True, em=True, n='blueAASG')
mc.connectAttr(blueAA + '.outColor', blueAASG + '.surfaceShader')
mc.setAttr(blueAA + '.color', 0.0, 0.0, 0.3, type='double3')
mc.setAttr(blueAA + '.cosinePower', 2)
mc.setAttr(blueAA + '.specularColor', 0.0, 0.0, 0.3, type='double3')
mc.setAttr(blueAA + '.reflectivity', 0.2)
def blueFineMetallic():
### blue fine metallic
global blueFMSG
blueFM = mc.shadingNode('phong', asShader=True, n='blueFM')
blueFMSG = mc.sets(r=True, nss=True, em=True, n='blueFMSG')
mc.connectAttr(blueFM + '.outColor', blueFMSG + '.surfaceShader')
mc.setAttr(blueFM + '.color', 0.04, 0.04, 0.5, type='double3')
mc.setAttr(blueFM + '.cosinePower', 20)
mc.setAttr(blueFM + '.specularColor', 0.04, 0.04, 0.5, type='double3')
mc.setAttr(blueFM + '.reflectivity', 0.8)
def redAnodizedAluminum():
### red anodized aluminum
global redAASG
redAA = mc.shadingNode('phong', asShader=True, n='redAA')
redAASG = mc.sets(r=True, nss=True, em=True, n='redAASG')
mc.connectAttr(redAA + '.outColor', redAASG + '.surfaceShader')
mc.setAttr(redAA + '.color', 0.5, 0.0395, 0.0395, type='double3')
mc.setAttr(redAA + '.cosinePower', 2)
mc.setAttr(redAA + '.specularColor', 0.5, 0.0395, 0.0395, type='double3')
mc.setAttr(redAA + '.reflectivity', 0.2)
def clearPlastic():
### clear plastic
global cPlasticSG
cPlastic = mc.shadingNode('phong', asShader=True, n='cPlastic')
cPlasticSG = mc.sets(r=True, nss=True, em=True, n='cPlasticSG')
mc.connectAttr(cPlastic + '.outColor', cPlasticSG + '.surfaceShader')
mc.setAttr(cPlastic + '.color', 0.0, 0.0, 0.0, type='double3')
mc.setAttr(cPlastic + '.cosinePower', 20)
mc.setAttr(cPlastic + '.specularColor', 2.0, 2.0, 2.0, type='double3')
mc.setAttr(cPlastic + '.reflectivity', 0.5)
mc.setAttr(cPlastic + '.transparency', 0.6, 0.6, 0.6, type='double3')
def createMaterial(name, color, type):
cmds.sets(renderable=True,
noSurfaceShader=True,
empty=True,
name=name + 'SG')
cmds.shadingNode(type, asShader=True, name=name)
cmds.setAttr(name + '.color',
color[0],
color[1],
color[2],
type='double3')
cmds.connectAttr(name + '.outColor', name + 'SG.surfaceShader')
def chrome():
### blue clear plastic
global chromeSG
chrome = mc.shadingNode('phong', asShader=True, n='chrome')
chromeSG = mc.sets(r=True, nss=True, em=True, n='chromeSG')
mc.connectAttr(chrome + '.outColor', chromeSG + '.surfaceShader')
mc.setAttr(chrome + '.color', 0.0, 0.0, 0.0, type='double3')
mc.setAttr(chrome + '.transparency', 0.0, 0.0, 0.0, type='double3')
mc.setAttr(chrome + '.ambientColor', 1.0, 1.0, 1.0, type='double3')
mc.setAttr(chrome + '.incandescence', 0.122, 0.122, 0.122, type='double3')
mc.setAttr(chrome + '.cosinePower', 20)
mc.setAttr(chrome + '.specularColor', 2.0, 2.0, 2.0, type='double3')
mc.setAttr(chrome + '.reflectivity', 2.0)
def shinyGold():
### gold
global shinyGoldSG
chrome = mc.shadingNode('blinn', asShader=True, n='shinyGold')
shinyGoldSG = mc.sets(r=True, nss=True, em=True, n='ShinyGoldSG')
mc.connectAttr(chrome + '.outColor', shinyGoldSG + '.surfaceShader')
mc.setAttr(chrome + '.color', 0.75, 0.5, 0.12, type='double3')
mc.setAttr(chrome + '.transparency', 0.0, 0.0, 0.0, type='double3')
mc.setAttr(chrome + '.ambientColor', 0.75, 0.5, 0.12, type='double3')
mc.setAttr(chrome + '.incandescence', 0.122, 0.122, 0.122, type='double3')
#mc.setAttr(chrome+'.cosinePower', 20)
mc.setAttr(chrome + '.specularColor', 0.75, 0.50, 0.12, type='double3')
mc.setAttr(chrome + '.reflectivity', 2.0)
def silver():
### silver
global silverSG
silver = mc.shadingNode('blinn', asShader=True, n='silver')
silverSG = mc.sets(r=True, nss=True, em=True, n='silverSG')
mc.connectAttr(silver + '.outColor', silverSG + '.surfaceShader')
mc.setAttr(silver + '.color', 0.0, 0.0, 0.0, type='double3')
mc.setAttr(silver + '.transparency', 0.0, 0.0, 0.0, type='double3')
mc.setAttr(silver + '.ambientColor', 0.0, 0.0, 0.0, type='double3')
mc.setAttr(silver + '.incandescence', 0.122, 0.122, 0.122, type='double3')
#mc.setAttr(chrome+'.cosinePower', 20)
mc.setAttr(silver + '.specularColor', 1.0, 1.0, 1.0, type='double3')
mc.setAttr(silver + '.reflectivity', 2.0)
def createShader(self, shaderName, shaderType ='blinn'):
shaderEngine = None
if not cmds.objExists(shaderName):
shader = cmds.shadingNode(shaderType, asShader=True)
shader = cmds.rename(shader, shaderName)
shaderEngine = cmds.sets(renderable=True, empty=True, noSurfaceShader=True, name=shader + '_SG')
cmds.connectAttr(shader + '.outColor', shaderEngine + '.surfaceShader')
else:
shader = shaderName
engines = cmds.listConnections(shader + '.outColor')
if engines:
shaderEngine = engines[0]
return shader, shaderEngine
def sword():
### silver
global swordSG
sword = mc.shadingNode('blinn', asShader=True, n='sword')
swordSG = mc.sets(r=True, nss=True, em=True, n='swordSG')
mc.connectAttr(sword + '.outColor', swordSG + '.surfaceShader')
mc.setAttr(sword + '.color', 1.0, 0.4, 0.7, type='double3')
mc.setAttr(sword + '.transparency', 0.0, 0.0, 0.0, type='double3')
mc.setAttr(sword + '.ambientColor', 0.0, 0.0, 0.0, type='double3')
mc.setAttr(sword + '.incandescence', 0.0, 0.0, 0.0, type='double3')
#mc.setAttr(chrome+'.cosinePower', 20)
mc.setAttr(sword + '.specularColor', 0.5, 0.5, 0.5, type='double3')
mc.setAttr(sword + '.reflectivity', 0.5)
mc.setAttr(sword + '.eccentricity', 0.3)
mc.setAttr(sword + '.glowIntensity', 1.0)
def build(cls):
prints = cls.getTargets(2)
if not prints or len(prints) < 2:
return False
prev = prints[0]
for p in prints[1:]:
if not cmds.attributeQuery(cls._PREVIOUS_PRINT_ATTR, node=p, exists=True):
cmds.addAttr(longName=cls._PREVIOUS_PRINT_ATTR, attributeType='message')
prevs = cls.getPrevious(p)
if not prevs or prev not in prevs:
cmds.connectAttr(prev + '.message', p + '.' + cls._PREVIOUS_PRINT_ATTR, force=True)
prev = p
return True
def __init__(self, name, r, g, b):
### blue clear plastic
blueCPlastic = mc.shadingNode('phong', asShader=True, n='blueCPlastic')
self.PlasticSG = mc.sets(r=True, nss=True, em=True, n='blueCPlasticSG')
mc.connectAttr(blueCPlastic + '.outColor',
self.PlasticSG + '.surfaceShader')
mc.setAttr(blueCPlastic + '.color', r, g, b, type='double3')
mc.setAttr(blueCPlastic + '.cosinePower', 20)
mc.setAttr(blueCPlastic + '.specularColor',
2.0,
2.0,
2.0,
type='double3')
mc.setAttr(blueCPlastic + '.reflectivity', 0.5)
mc.setAttr(blueCPlastic + '.transparency',
0.6,
0.6,
0.6,
type='double3')
def _createMeshPointNode(self, shapeData):
self._removeMeshPointNode()
try:
node = cmds.createNode('closestPointOnMesh', skipSelect=True)
self._meshPointNode = node
except Exception as err:
print(Logger.createErrorMessage(u'ERROR: Unable to create mesh point node', err))
self._removeMeshPointNode()
return False
try:
cmds.connectAttr(shapeData['name'] + '.message', node + '.inMesh', force=True)
except Exception as err:
print(Logger.createErrorMessage(u'ERROR: Unable to connect mesh point node to shape', err))
self._removeMeshPointNode()
return False
return True
def _createMeshPointNode(self, shapeData):
self._removeMeshPointNode()
try:
node = cmds.createNode('closestPointOnMesh', skipSelect=True)
self._meshPointNode = node
except Exception as err:
print(Logger.createErrorMessage(u'ERROR: Unable to create mesh point node', err))
self._removeMeshPointNode()
return False
try:
cmds.connectAttr(shapeData['name'] + '.message', node + '.inMesh', force=True)
except Exception as err:
print(Logger.createErrorMessage(u'ERROR: Unable to connect mesh point node to shape', err))
self._removeMeshPointNode()
return False
return True
def npchrome():
### blue clear plastic
global npchromeSG
npchrome = mc.shadingNode('phong', asShader=True, n='npchrome')
npchromeSG = mc.sets(r=True, nss=True, em=True, n='npchromeSG')
mc.connectAttr(npchrome + '.outColor', npchromeSG + '.surfaceShader')
mc.setAttr(npchrome + '.color', 0.0, 0.0, 0.0, type='double3')
mc.setAttr(npchrome + '.transparency', 0.0, 0.0, 0.0, type='double3')
mc.setAttr(npchrome + '.ambientColor', 1.0, 1.0, 1.0, type='double3')
mc.setAttr(npchrome + '.incandescence',
0.122,
0.122,
0.122,
type='double3')
mc.setAttr(npchrome + '.cosinePower', 20)
mc.setAttr(npchrome + '.specularColor', 2.0, 2.0, 2.0, type='double3')
mc.setAttr(npchrome + '.reflectivity', 2.0)
#create water texture and link it
texture = mc.shadingNode('water', at=True, n='chromeTex')
chromePlaceTex = mc.shadingNode('place2dTexture',
au=True,
n='chromePlaceTex')
mc.connectAttr(chromePlaceTex + '.outUV', texture + '.uv')
mc.connectAttr(chromePlaceTex + '.outUvFilterSize',
texture + '.uvFilterSize')
mc.defaultNavigation(ce=True, d=npchrome + '.normalCamera', s=texture)
mc.setAttr(texture + '.alphaIsLuminance', True)
#mc.connectAttr(texture+'.outAlpha', 'bump2d2.bumpValue', f=True )
#mc.connectAttr('bump2d2.outNormal', npchrome+'.bumpValue', f=True )
#set texture settings
mc.setAttr(texture + '.numberOfWaves', 32)
mc.setAttr(texture + '.waveTime', 1.0)
mc.setAttr(texture + '.waveFrequency', 5.25)
def createToken(cls, uid, props, trackSetNode =None):
""" A token is created, provided with some additional Maya attributes,
and placed in the scene. Tokens are functtionally similar to
TrackNodes, but with different shapes and attributes. """
cylinderHeight = 5.0
coneHeight = 10.0
if not trackSetNode:
trackSetNode = TrackSceneUtils.getTrackSetNode()
if not trackSetNode:
return None
node = cls.getTrackNode(uid, trackSetNode=trackSetNode)
if node:
return node
# determine whether left or right, and manus or pes, from name
name = props['name'] if props else None
if not name:
print('createToken: No properties specified')
return
# remove '_proxy' or '_token' if present (as in S6_LP3_proxy)
nameFields = cls.decomposeName(name.split('_')[0])
isLeft = nameFields['left']
isPes = nameFields['pes']
# make a cone for the token of an proxy else a cylinder
if uid.endswith('_proxy'):
node = cmds.polyCone(
radius=0.5,
height=coneHeight,
subdivisionsX=10,
subdivisionsY=1,
subdivisionsZ=1,
axis=(0, 1, 0),
createUVs=0,
constructionHistory=0,
name='Token_0')[0]
cmds.move(0, 0.5 * coneHeight, 0)
else:
node = cmds.polyCylinder(
radius=0.5,
height=cylinderHeight,
subdivisionsX=10,
subdivisionsY=1,
subdivisionsZ=1,
subdivisionsCaps=0,
axis=(0, 1, 0),
createUVs=0,
constructionHistory=0,
name='Token_0')[0]
cmds.move(0, 0.5 * cylinderHeight, 0)
# Set up the basic cadence attributes
cmds.addAttr(longName='cadence_dx', shortName='dx', niceName='DX')
cmds.addAttr(longName='cadence_dy', shortName='dy', niceName='DY')
cmds.addAttr(
longName='cadence_uniqueId',
shortName='track_uid',
dataType='string',
niceName='UID')
cmds.addAttr(
longName='cadence_name',
shortName='token_name',
dataType='string',
niceName='Name')
# Disable some transform attributes
cmds.setAttr(node + '.rotateX', lock=True)
cmds.setAttr(node + '.rotateZ', lock=True)
cmds.setAttr(node + '.scaleY', lock=True)
cmds.setAttr(node + '.translateY', lock=True)
# Scale the cylinder/cone in x and z to represent 'dy' and 'dx' in
# centimeters. There is a change of coordinates between Maya (X, Z) and
# the simulator (X, Y) space. For example, for the right manus:
# x = int(100*float(entry['rm_y']))
# z = int(100*float(entry['rm_x']))
# and likewise for dx and dy.
# the DX and DY attributes affect scaleZ and scaleX in the node
cmds.connectAttr(node + '.dx', node + '.scaleZ')
cmds.connectAttr(node + '.dy', node + '.scaleX')
# add a short annotation based on the name
annotation = cmds.annotate(node, text=cls.shortName(props['name']))
cmds.select(annotation)
aTransform = cmds.pickWalk(direction='up')[0]
# control it's position by that of the node, so that it stays 15 cm
# above the pes and 10 cm above the manus
if isPes:
cmds.move(0.0, 15.0, 0.0, aTransform)
else:
cmds.move(0.0, 10.0, 0.0, aTransform)
cmds.connectAttr(node + '.translateX', aTransform + '.translateX')
cmds.connectAttr(node + '.translateZ', aTransform + '.translateZ')
# and make it non-selectable
cmds.setAttr(aTransform + '.overrideEnabled', 1)
cmds.setAttr(aTransform + '.overrideDisplayType', 2)
cmds.rename(aTransform, "TokenAnnotation_0")
if isPes:
if isLeft:
color = TrackwayShaderConfig.LEFT_PES_TOKEN_COLOR
else:
color = TrackwayShaderConfig.RIGHT_PES_TOKEN_COLOR
else:
if isLeft:
color = TrackwayShaderConfig.LEFT_MANUS_TOKEN_COLOR
else:
color = TrackwayShaderConfig.RIGHT_MANUS_TOKEN_COLOR
ShadingUtils.applyShader(color, node)
cmds.select(node)
# add the new node to the Cadence track set
cmds.sets(node, add=trackSetNode)
# finally, initialize all the properties from the dictionary props
cls.setTokenProps(node, props)
return node
def simulate(numFlockers, numFrames, alignmentWeight, cohesionWeight,
separationWeight, speed, distance, in3D):
# Create the flock
flock = Flock(alignmentWeight, cohesionWeight, separationWeight, speed,
distance)
cmds.shadingNode('phong', asShader=True, name='Redwax')
cmds.select('Redwax')
cmds.sets(renderable=True,
noSurfaceShader=True,
empty=True,
name='RedwaxSG')
cmds.connectAttr('Redwax.outColor', 'RedwaxSG.surfaceShader', f=True)
cmds.setAttr('Redwax.color', 1, 0, 0, type='double3')
cmds.setAttr('Redwax.cosinePower', 5)
cmds.setAttr('Redwax.reflectivity', 0)
cmds.setAttr('Redwax.specularColor', 1, 1, 1, type='double3')
cmds.shadingNode('blinn', asShader=True, name='Plastic')
cmds.select('Plastic')
cmds.sets(renderable=True,
noSurfaceShader=True,
empty=True,
name='PlasticSG')
cmds.connectAttr('Plastic.outColor', 'PlasticSG.surfaceShader', f=True)
cmds.setAttr('Plastic.color', 0.9, 0.9, 0.9, type='double3')
cmds.setAttr('Plastic.eccentricity', 0.55)
cmds.setAttr('Plastic.specularRollOff', 1)
cmds.setAttr('Plastic.diffuse', 0.9)
cmds.directionalLight(rotation=(-90, 0, 0))
cmds.polyPlane(name='base')
cmds.setAttr('base.scaleX', 25)
cmds.setAttr('base.scaleZ', 25)
cmds.setAttr('base.translateY', -15)
cmds.select('base')
cmds.sets(e=True, forceElement='PlasticSG')
for i in range(numFlockers):
xVel = random.randint(-9, 9)
yVel = random.randint(-9, 9)
zVel = random.randint(-9, 9)
xPos = random.randint(-100, 100)
yPos = random.randint(-100, 100)
zPos = random.randint(-100, 100)
fname = 'f' + str(i)
if (in3D):
flock.addFlocker(xVel, yVel, zVel, xPos, yPos, zPos, fname)
else:
flock.addFlocker(xVel, 0, zVel, xPos, 0, zPos, fname)
cmds.polySphere(name=fname, radius=0.2)
cmds.select(fname)
cmds.sets(e=True, forceElement='RedwaxSG')
# Initialize time
time = 0
endTime = numFrames
cmds.currentTime(time)
# Initialize flock member positions
for flocker in flock.flockers:
cmds.select(flocker.name)
cmds.move(flocker.xPos, flocker.yPos, flocker.zPos)
cmds.setKeyframe(flocker.name)
while time < endTime:
time += 12
for flocker in flock.flockers:
flocker.updateVelocity(flock)
for flocker in flock.flockers:
flocker.updatePostion()
cmds.currentTime(time)
for flocker in flock.flockers:
fx = flocker.name + '.translateX'
fy = flocker.name + '.translateY'
fz = flocker.name + '.translateZ'
cmds.setAttr(fx, flocker.xPos)
cmds.setAttr(fy, flocker.yPos)
cmds.setAttr(fz, flocker.zPos)
cmds.setKeyframe(flocker.name)
def createTrackNode(cls, uid, trackSetNode =None, props =None):
""" A track node consists of a triangular pointer (left = red, right =
green) which is selectable but only allows rotateY, translateX, and
translateZ. The node has a child, a transform called inverter, which
serves to counteract the scaling in x and z that is applied to the
triangular node. There are two orthogonal rulers (width and
length). Width and length uncertainty is represented by rectangular
bars at the ends of the rulers. In Maya one can directly adjust
track position (translateX and translateZ) and orientation
(rotationY); other attributes are adjusted only through the UI. """
if not trackSetNode:
trackSetNode = TrackSceneUtils.getTrackSetNode()
if not trackSetNode:
return None
node = cls.getTrackNode(uid, trackSetNode=trackSetNode)
if node:
return node
# Set up dimensional constants for the track node
nodeThickness = 1.0
thetaBreadth = 0.1
thetaThickness = 0.5
barBreadth = 2.0
barThickness = 0.5
rulerBreadth = 1.0
rulerThickness = 0.25
epsilon = 1.0
# Create an isoceles triangle pointer, with base aligned with X, and
# scaled by node.width. The midpoint of the base is centered on the
# 'track center' and the altitude extends from that center of the track
# 'anteriorly' to the perimeter of the track's profile (if present, else
# estimated). The node is scaled longitudinally (in z) based on the
# distance zN (the 'anterior' length of the track, in cm). The triangle
# is initially 1 cm on a side.
sideLength = 1.0
node = cmds.polyPrism(
length=nodeThickness,
sideLength=sideLength,
numberOfSides=3,
subdivisionsHeight=1,
subdivisionsCaps=0,
axis=(0, 1, 0),
createUVs=0,
constructionHistory=0,
name='Track0')[0]
# Point the triangle down the +Z axis
cmds.rotate(0.0, -90.0, 0.0)
# push it down below ground level so that the two rulers are just
# submerged, and scale the triangle in Z to match its width (1 cm) so it
# is ready to be scaled
cmds.move(0, -(nodeThickness/2.0 + rulerThickness), math.sqrt(3.0)/6.0)
# move the node's pivot to the 'base' of the triangle so it scales
# outward from that point
cmds.move(
0, 0, 0, node + ".scalePivot", node + ".rotatePivot", absolute=True)
cmds.scale(2.0/math.sqrt(3.0), 1.0, 100.0)
cmds.makeIdentity(
apply=True,
translate=True,
rotate=True,
scale=True,
normal=False)
# Set up the cadence attributes
cmds.addAttr(
longName='cadence_width',
shortName=TrackPropEnum.WIDTH.maya,
niceName='Width')
cmds.addAttr(
longName='cadence_widthUncertainty',
shortName=TrackPropEnum.WIDTH_UNCERTAINTY.maya,
niceName='Width Uncertainty')
cmds.addAttr(
longName='cadence_length',
shortName=TrackPropEnum.LENGTH.maya,
niceName='Length')
cmds.addAttr(
longName='cadence_lengthUncertainty',
shortName=TrackPropEnum.LENGTH_UNCERTAINTY.maya,
niceName='Length Uncertainty')
cmds.addAttr(
longName='cadence_lengthRatio',
shortName=TrackPropEnum.LENGTH_RATIO.maya,
niceName='Length Ratio')
cmds.addAttr(
longName='cadence_rotationUncertainty',
shortName=TrackPropEnum.ROTATION_UNCERTAINTY.maya,
niceName='Rotation Uncertainty')
cmds.addAttr(
longName='cadence_uniqueId',
shortName=TrackPropEnum.UID.maya,
dataType='string',
niceName='Unique ID')
# Construct a ruler representing track width, then push it down just
# below ground level, and ake it non-selectable. Drive its scale by the
# node's width attribute.
widthRuler = cmds.polyCube(
axis=(0, 1, 0),
width=100.0,
height=rulerThickness,
depth=rulerBreadth,
subdivisionsX=1,
subdivisionsY=1,
createUVs=0,
constructionHistory=0,
name='WidthRuler')[0]
# Push it down to just rest on the triangular node (which is already
# submerged by the thickness of the ruler and half the node thickness.
cmds.move(0.0, -rulerThickness/2.0, 0.0)
cmds.setAttr(widthRuler + '.overrideEnabled', 1)
cmds.setAttr(widthRuler + '.overrideDisplayType', 2)
# Construct a ruler representing track length and push it down the same
# as the width ruler, and make it non-selectable. Its length will be
# driven by the node's length attribute.
lengthRuler = cmds.polyCube(
axis=(0, 1, 0),
width=rulerBreadth,
height=rulerThickness,
depth=100.0,
subdivisionsX=1,
subdivisionsY=1,
createUVs=0,
constructionHistory=0,
name='LengthRuler')[0]
cmds.move(0.0, -rulerThickness/2.0, 0.0)
cmds.setAttr(lengthRuler + '.overrideEnabled', 1)
cmds.setAttr(lengthRuler + '.overrideDisplayType', 2)
# Now construct 'error bars' to the North, South, West, and East of the
# node, to visualize uncertainty in width (West and East bars) and
# length (North and South bars), and push them just below ground level,
# and make them non-selectable.
barN = cmds.polyCube(
axis=(0,1,0),
width=barBreadth,
height=barThickness,
depth=100.0,
subdivisionsX=1,
subdivisionsY=1,
createUVs=0,
constructionHistory=0,
name='BarN')[0]
cmds.move(0, -(barThickness/2 + rulerThickness), 0)
cmds.setAttr(barN + '.overrideEnabled', 1)
cmds.setAttr(barN + '.overrideDisplayType', 2)
barS = cmds.polyCube(
axis=(0, 1, 0),
width=barBreadth,
height=barThickness,
depth=100.0,
subdivisionsX=1,
subdivisionsY=1,
createUVs=0,
constructionHistory=0,
name='BarS')[0]
cmds.move(0, -(barThickness/2 + rulerThickness), 0)
cmds.setAttr(barS + '.overrideEnabled', 1)
cmds.setAttr(barS + '.overrideDisplayType', 2)
barW = cmds.polyCube(
axis=(0, 1, 0),
width=100.0,
height=barThickness,
depth=barBreadth,
subdivisionsX=1,
subdivisionsY=1,
createUVs=0,
constructionHistory=0,
name='BarW')[0]
cmds.move(0, -(barThickness/2 + rulerThickness), 0)
cmds.setAttr(barW + '.overrideEnabled', 1)
cmds.setAttr(barW + '.overrideDisplayType', 2)
barE = cmds.polyCube(
axis=(0, 1, 0),
width=100.0,
height=barThickness,
depth=barBreadth,
subdivisionsX=1,
subdivisionsY=1,
createUVs=0,
constructionHistory=0,
name='BarE')[0]
cmds.move(0, -(barThickness/2 + rulerThickness), 0)
cmds.setAttr(barE + '.overrideEnabled', 1)
cmds.setAttr(barE + '.overrideDisplayType', 2)
# Create two diverging lines that indicate rotation uncertainty (plus
# and minus), with their pivots placed so they extend from the node
# center, and each is made non-selectable. First make the indicator of
# maximum (counterclockwise) estimated track rotation
thetaPlus = cmds.polyCube(
axis=(0, 1, 0),
width=thetaBreadth,
height=thetaThickness,
depth=1.0,
subdivisionsX=1,
subdivisionsY=1,
createUVs=0,
constructionHistory=0,
name='ThetaPlus')[0]
cmds.setAttr(thetaPlus + '.overrideEnabled', 1)
cmds.setAttr(thetaPlus + '.overrideDisplayType', 2)
# Next, construct the indicator of the minimum (clockwise) estimate of
# track rotation
thetaMinus = cmds.polyCube(
axis=(0, 1, 0),
width=thetaBreadth,
height=thetaThickness,
depth=1.0,
subdivisionsX=1,
subdivisionsY=1,
createUVs=0,
constructionHistory=0,
name='ThetaMinus')[0]
cmds.setAttr(thetaMinus + '.overrideEnabled', 1)
cmds.setAttr(thetaMinus + '.overrideDisplayType', 2)
# The two width 'error bars' will be translated outward from the node
# center. First, the width attribute is converted from meters (as it
# comes from the database) to centimeters; the computation is available
# in the output of the node 'width'.
width = cmds.createNode('multiplyDivide', name='width')
cmds.setAttr(width + '.operation', 1)
cmds.setAttr(width + '.input1X', 100.0)
cmds.connectAttr(
node + '.' + TrackPropEnum.WIDTH.maya, width + '.input2X')
# Translate barW in x by width/2.0; output is in xW.outputX
xW = cmds.createNode('multiplyDivide', name = 'xW')
cmds.setAttr(xW + '.operation', 2)
cmds.connectAttr(width + '.outputX', xW + '.input1X')
cmds.setAttr(xW + '.input2X', 2.0)
cmds.connectAttr(xW + '.outputX', barW + '.translateX')
# Translate barE in x by -width/2.0; output is in xE.outputX
xE = cmds.createNode('multiplyDivide', name = 'xE')
cmds.setAttr(xE + '.operation', 2) # division operation
cmds.connectAttr(width + '.outputX', xE + '.input1X')
cmds.setAttr(xE + '.input2X', -2.0)
cmds.connectAttr(xE + '.outputX', barE + '.translateX')
# Now regarding length, first convert the node.length attribute from
# meters to centimeters. This computation is available in the output of
# the node 'length'
length = cmds.createNode('multiplyDivide', name='length')
cmds.setAttr(length + '.operation', 1)
cmds.setAttr(length + '.input1X', 100.0)
cmds.connectAttr(
node + '.' + TrackPropEnum.LENGTH.maya, length + '.input2X')
# scale thetaPlus and thetaMinus by length (since they are 1 cm,
# multiply by length in cm)
cmds.connectAttr(length + '.outputX', thetaPlus + '.scaleZ')
cmds.connectAttr(length + '.outputX', thetaMinus + '.scaleZ')
# Then barN is translated forward in z by zN = lengthRatio*length
# (centimeters)
zN = cmds.createNode('multiplyDivide', name='zN')
cmds.setAttr(zN + '.operation', 1)
cmds.connectAttr(
node + '.' + TrackPropEnum.LENGTH_RATIO.maya, zN + '.input1X')
cmds.connectAttr(length + '.outputX', zN + '.input2X')
cmds.connectAttr(zN + '.outputX', barN + '.translateZ')
# Next, translate barS backward in z by (zN - length); output is in
# zS.output1D
zS = cmds.createNode('plusMinusAverage', name='sZ')
cmds.setAttr(zS + '.operation', 2)
cmds.connectAttr(zN + '.outputX', zS + '.input1D[0]')
cmds.connectAttr(length + '.outputX', zS + '.input1D[1]')
cmds.connectAttr(zS + '.output1D', barS + '.translateZ')
# Next, compute the half length, hl = length/2.0 (centimeters)
hl = cmds.createNode('multiplyDivide', name='hl')
cmds.setAttr(hl + '.operation', 2)
cmds.connectAttr(length + '.outputX', hl + '.input1X')
cmds.setAttr(hl + '.input2X', 2.0)
# Translate lengthRuler along z by zL = (zN - hl) (centimeters)
zL = cmds.createNode('plusMinusAverage', name='zL')
cmds.setAttr(zL + '.operation', 2)
cmds.connectAttr(zN + '.outputX', zL + '.input1D[0]')
cmds.connectAttr(hl + '.outputX', zL + '.input1D[1]')
cmds.connectAttr(zL + '.output1D', lengthRuler + '.translateZ')
# Scale the four 'error bars' to represent the width and length
# uncertainties (centimeters)
cmds.connectAttr(
node + "." + TrackPropEnum.WIDTH_UNCERTAINTY.maya,
barW + '.scaleX')
cmds.connectAttr(
node + "." + TrackPropEnum.WIDTH_UNCERTAINTY.maya,
barE + '.scaleX')
cmds.connectAttr(
node + "." + TrackPropEnum.LENGTH_UNCERTAINTY.maya,
barN + '.scaleZ')
cmds.connectAttr(
node + "." + TrackPropEnum.LENGTH_UNCERTAINTY.maya,
barS + '.scaleZ')
# Create an 'inverter' transform under which all the other parts are
# hung as children, which counteracts scaling applied to its parent
# triangular node.
inverter = cmds.createNode('transform', name='inverter')
# drive the inverter's .scaleX and .scaleZ as the inverse of the parent
# node's scale values
sx = cmds.createNode('multiplyDivide', name='sx')
cmds.setAttr(sx + '.operation', 2)
cmds.setAttr(sx + '.input1X', 1.0)
cmds.connectAttr(node + '.scaleX', sx + '.input2X')
cmds.connectAttr(sx + '.outputX', inverter + '.scaleX')
sz = cmds.createNode('multiplyDivide', name='sz')
cmds.setAttr(sz + '.operation', 2)
cmds.setAttr(sz + '.input1X', 1.0)
cmds.connectAttr(node + '.scaleZ', sz + '.input2X')
cmds.connectAttr(sz + '.outputX', inverter + '.scaleZ')
# Assemble the parts as children under the scale inverter node
cmds.parent(lengthRuler, inverter)
cmds.parent(widthRuler, inverter)
cmds.parent(barN, inverter)
cmds.parent(barS, inverter)
cmds.parent(barW, inverter)
cmds.parent(barE, inverter)
cmds.parent(thetaPlus, inverter)
cmds.parent(thetaMinus, inverter)
cmds.parent(inverter, node)
# Rotate thetaPlus and thetaMinus about the Y axis to indicate
# rotational uncertainty
cmds.connectAttr(
node + '.' + TrackPropEnum.ROTATION_UNCERTAINTY.maya,
node + '|' + inverter + '|' + thetaPlus + '.rotateY')
neg = cmds.createNode('multiplyDivide', name='negative')
cmds.setAttr(neg + '.operation', 1)
cmds.setAttr(neg + '.input1X', -1.0)
cmds.connectAttr(
node + '.' + TrackPropEnum.ROTATION_UNCERTAINTY.maya,
neg + '.input2X')
cmds.connectAttr(
neg + '.outputX',
node + '|' + inverter + '|' + thetaMinus + '.rotateY')
# Disable some transforms of the node
cmds.setAttr(node + '.rotateX', lock=True)
cmds.setAttr(node + '.rotateZ', lock=True)
cmds.setAttr(node + '.scaleY', lock=True)
cmds.setAttr(node + '.translateY', lock=True)
# Now, the width of the triangle will be driven by its width attribute
# (driving .scaleX)
cmds.connectAttr(node + '.width', node + '.scaleX')
# The quantity zN is used to scale length of the triangle
cmds.connectAttr(zN + '.outputX', node + '.scaleZ')
# Scale the 'length' (in x) of the width ruler
cmds.connectAttr(
node + '.width', node + '|' + inverter + '|WidthRuler.scaleX')
# Scale the length of the length ruler
cmds.connectAttr(
node + '.length', node + '|' + inverter + '|LengthRuler.scaleZ')
# Translate the track node epsilon below ground level (to reveal the
# overlaid track siteMap)
cmds.move(0, -epsilon, 0, node)
# Initialize all the properties from the dictionary
if props:
cls.setTrackProps(node, props)
else:
print('in createTrackNode: properties not provided')
return node
# Add the new nodeName to the Cadence track scene set, color it, and
# we're done
cmds.sets(node, add=trackSetNode)
cls.colorTrackNode(node, props)
return node
def createMaterial( name, color, type ):
cmds.sets( renderable=True, noSurfaceShader=True, empty=True, name=name + 'SG' )
cmds.shadingNode( type, asShader=True, name=name )
cmds.setAttr( name+'.color', color[0], color[1], color[2], type='double3')
cmds.connectAttr(name+'.outColor', name+'SG.surfaceShader')
def _handleExample1Button(self):
"""
This callback creates a polygonal cylinder in the Maya scene.
r = 50
a = 2.0*r
y = (0, 1, 0)
c = cmds.polyCylinder(
r=r, h=5, sx=40, sy=1, sz=1, ax=y, rcp=0, cuv=2, ch=1, n='exampleCylinder')[0]
cmds.select(c)
response = nimble.createRemoteResponse(globals())
response.put('name', c)
"""
cmds.select(allDagObjects=True)
cmds.pointLight(rgb=(1, 1, 0.5))
cmds.move(-10, 15, 14)
cmds.pointLight(rgb=(1, 0.1, 0.2))
cmds.move(-8, 15, -10)
cmds.pointLight(rgb=(1, 0.1, 0.2))
cmds.move(-12, 15, 3)
material = str(self.comboBox.currentText())
object3 = str(self.comboBox_2.currentText())
print material
array = ['plastic1', 'plastic2', 'red', 'gold', 'silver', 'bronze']
object = ['captain', 'soldiers', 'carpet']
print array
# material 1
#plastic1 = "plastic1"
plastic1 = cmds.shadingNode('blinn', asShader=True)
cmds.setAttr("%s.color" % plastic1, 0.95, 0.95, 0.95, type="double3")
cmds.setAttr("%s.incandescence" % plastic1,
0.5,
0.5,
0.5,
type="double3")
#cmds.setAttr("%s.transparency" % plastic1, 0.75, 0.75, 0.75, type="double3")
#cmds.setAttr("%s.incandescence" % plastic1,0.5, 0.5, 0.5, type="double3")
# material 2
plastic2 = cmds.shadingNode('lambert', asShader=True)
cmds.sets(name="%sSG" % plastic2,
renderable=True,
noSurfaceShader=True,
empty=True)
cmds.connectAttr("%s.outColor" % plastic2,
"%sSG.surfaceShader" % plastic2)
cmds.setAttr("%s.color" % plastic2, 0.1, 1.0, 0.2, type="double3")
#cmds.setAttr("%s.transparency" % plastic2,0.75, 0.75, 0.75, type="double3")
cmds.setAttr("%s.incandescence" % plastic2,
0.5,
0.5,
0.5,
type="double3")
# material 3
red = cmds.shadingNode('blinn', asShader=True)
cmds.setAttr("%s.color" % red, 1.0, 0.1, 0.1, type="double3")
#cmds.setAttr("%s.transparency" % plastic1, 0.75, 0.75, 0.75, type="double3")
#cmds.setAttr("%s.incandescence" % plastic1,0.5, 0.5, 0.5, type="double3")
# material 4
#metal1 = 'metal1'
gold = cmds.shadingNode('blinn', asShader=True)
cmds.setAttr("%s.color" % gold, 1.0, 0.8, 0.0, type="double3")
# material 5
silver = cmds.shadingNode('blinn', asShader=True)
#cmds.setAttr("%s.color" % silver, 0.75, 075, 0.75, type="double3")
cmds.setAttr("%s.color" % silver, 0.9, 0.9, 1.0, type="double3")
# material 6
bronze = cmds.shadingNode('blinn', asShader=True)
cmds.setAttr("%s.color" % bronze, 0.8, 0.5, 0.2, type="double3")
cmds.select(object3)
if (material == array[0]):
cmds.hyperShade(assign=plastic1)
elif (material == array[1]):
cmds.hyperShade(assign=plastic2)
elif (material == array[2]):
cmds.hyperShade(assign=red)
elif (material == array[3]):
cmds.hyperShade(assign=gold)
elif (material == array[4]):
cmds.hyperShade(assign=silver)
elif (material == array[5]):
cmds.hyperShade(assign=bronze)