def plotCloudImage(self):
"""Generate some additional information and plots about the cloud image, if desired."""
from pImagePlots import PImagePlots
import pylab
im = PImagePlots()
im.setImage(self.cloudimage)
im.showImage(copy=True)
im.hanningFilter()
im.calcAll()
im.showPsd2d()
im.showAcovf2d()
im.showAcovf1d()
im.showSf(linear=True)
#pylab.show()
return
# And also try to make an image with the same (final) pixel scale, but that will be created (first)
# larger and then scaled down, to avoid introducing artifacts from the ACovF1d being truncated.
final_imsize = 1500 # pixels desired in final image
final_rad_fov = 1.75*numpy.sqrt(2) # degrees
final_pixscale = 2*final_rad_fov / float(final_imsize)
# Start with larger image
pixscale = final_pixscale
rad_fov = final_rad_fov
imsize = int(2*rad_fov / pixscale)
if (imsize%2 != 0):
imsize = imsize + 1
xr = xsf / pixscale # xr = in pixels, over range that want to simulate
print 'Image: Rad_fov', rad_fov, 'Imsize', imsize, 'Pixscale', pixscale, 'deg/pix', '(', pixscale*60.*60., 'arcsec/pix)'
im = PImagePlots(shift=True, nx=imsize, ny=imsize)
im.makeImageFromSf(sfx=xr, sf=SF)
im.showAcovf1d()
im.showPsd2dI()
# Trim image to desired final size
trim = round((imsize - final_imsize)/2.0)
print 'Trimming about %d pixels from each side' %(trim)
image = im.imageI[trim:trim+final_imsize, trim:trim+final_imsize]
image = rescaleImage(image.real, sigma_goal, kappa)
imsize = len(image)
pixscale = pixscale
rad_fov = imsize/2.0*pixscale
print 'Image After Trimming: Rad_fov', rad_fov, 'Imsize', imsize, 'Pixscale', pixscale, 'deg/pix', '(', pixscale*60.*60., 'arcsec/pix)'
im.setImage(image.real)
imageStats(im.image)
im.showImage(copy=True)
im.hanningFilter()
im.calcAll()
def inversion():
"""Generate some example images & invert them to reconstruct the original image."""
im = TestImage(shift=True, nx=1000, ny=1000)
#im.addEllipseGrid(gridX=200, gridY=100, semiX=50, semiY=25, value=1)
im.addLines(width=20, spacing=200, value=1, angle=45)
im.addSin(scale=300)
im.hanningFilter()
im.zeroPad()
#cmap = pylab.cm.gray_r
cmap = None
clims = im.showImage(cmap=cmap)
pylab.savefig('invert_image.%s' %(figformat), format='%s' %(figformat))
im.calcAll(min_npix=1, min_dr=1)
# Invert from ACovF and show perfect reconstruction.
im.invertAcovf2d()
im.invertPsd2d(useI=True)
im.invertFft(useI=True)
im.showImageI(clims=clims, cmap=cmap)
pylab.savefig('invert_acovf2d_good.%s' %(figformat), format='%s' %(figformat))
# Invert from ACovF 2d without phases
im.invertAcovf2d(usePhasespec=False, seed=42)
im.invertPsd2d(useI=True)
im.invertFft(useI=True)
im.showImageI(clims=clims, cmap=cmap)
pylab.savefig('invert_acovf2d_nophases.%s' %(figformat), format='%s' %(figformat))
# Invert from ACovF 1d with phases
im.invertAcovf1d(phasespec=im.phasespec)
im.invertAcovf2d(useI=True)
im.invertPsd2d(useI=True)
im.invertFft(useI=True)
im.showImageI(clims=clims, cmap=cmap)
pylab.savefig('invert_acovf1d_phases.%s' %(figformat), format='%s' %(figformat))
# Invert from ACovF 1d without phases
im.invertAcovf1d(seed=42)
im.invertAcovf2d(useI=True)
im.invertPsd2d(useI=True)
im.invertFft(useI=True)
im.showImageI(clims=clims, cmap=cmap)
pylab.savefig('invert_acovf1d_nophases.%s' %(figformat), format='%s' %(figformat))
# Recalculate 1-d PSD and ACovF from this last reconstructed image (ACovF1d no phases)
im2 = PImagePlots()
im2.setImage(im.imageI)
im2.calcAll(min_npix=1, min_dr=1)
legendlabels=['Reconstructed', 'Original']
im2.showPsd1d(comparison=im, legendlabels=legendlabels)
pylab.savefig('invert_recalc_ACovF_Psd1d.%s' %(figformat), format='%s' %(figformat))
im2.showAcovf1d(comparison=im, legendlabels=legendlabels)
pylab.savefig('invert_recalc_ACovF_Acovf1d.%s' %(figformat), format='%s' %(figformat))
# Invert from PSD and show perfect reconstruction.
im.invertPsd2d()
im.invertFft(useI=True)
im.showImageI(clims=clims, cmap=cmap)
pylab.savefig('invert_psd2d_good.%s' %(figformat), format='%s' %(figformat))
# Invert from PSD 2d without phases
im.invertPsd2d(usePhasespec=False, seed=42)
im.invertFft(useI=True)
im.showImageI(clims=clims, cmap=cmap)
pylab.savefig('invert_psd2d_nophases.%s' %(figformat), format='%s' %(figformat))
# Invert from PSD 1d with phases
im.invertPsd1d(phasespec=im.phasespec)
im.invertPsd2d(useI=True)
im.invertFft(useI=True)
im.showImageI(clims=clims, cmap=cmap)
pylab.savefig('invert_psd1d_phases.%s' %(figformat), format='%s' %(figformat))
# Invert from PSD 1d without phases
im.invertPsd1d(seed=42)
im.invertPsd2d(useI=True)
im.invertFft(useI=True)
im.showImageI(clims=clims, cmap=cmap)
pylab.savefig('invert_psd1d_nophases.%s' %(figformat), format='%s' %(figformat))
# Recalculate 1-d PSD and ACovF from this last reconstructed image (PSD1d no phases)
im2 = PImagePlots()
im2.setImage(im.imageI)
im2.calcAll(min_npix=1, min_dr=1)
im2.showPsd1d(comparison=im, legendlabels=legendlabels)
pylab.savefig('invert_recalc_PSD_Psd1d.%s' %(figformat), format='%s' %(figformat))
im2.showAcovf1d(comparison=im, legendlabels=legendlabels)
pylab.savefig('invert_recalc_PSD_Acovf1d.%s' %(figformat), format='%s' %(figformat))
pylab.close()
return
