def test_ipv6_compare(self):
"""Test the underlying __compare__ functionality of the
packet. Two packets constructed from the same bytes should be
equal and two that are not should not be equal."""
file = PcapConnector("loopping6.out")
packet = file.read()
ip1 = ipv6(packet[file.dloff:len(packet)])
ip2 = ipv6(packet[file.dloff:len(packet)])
assert (ip1 != None)
assert (ip2 != None)
self.assertEqual(ip1, ip2, "packets should be equal but are not")
ip1.dst = inet_pton(AF_INET6, "2001:ffff::1")
self.assertNotEqual(ip1, ip2, "packets compare equal but should not")
def test_ipv6_compare(self):
"""Test the underlying __compare__ functionality of the
packet. Two packets constructed from the same bytes should be
equal and two that are not should not be equal."""
file = PcapConnector("loopping6.out")
packet = file.read()
ip1 = ipv6(packet[file.dloff:len(packet)])
ip2 = ipv6(packet[file.dloff:len(packet)])
assert (ip1 != None)
assert (ip2 != None)
self.assertEqual(ip1, ip2, "packets should be equal but are not")
ip1.dst = inet_pton(AF_INET6, "2001:ffff::1");
self.assertNotEqual(ip1, ip2, "packets compare equal but should not")
def test_icmpv6_compare(self):
"""Test the underlying __compare__ functionality of the
packet. Two packets constructed from the same bytes should be
equal and two that are not should not be equal."""
file = PcapConnector("loopping6.out")
packet = file.read()
ip1 = ipv6(packet[file.dloff:len(packet)])
ip2 = ipv6(packet[file.dloff:len(packet)])
assert (ip1 != None)
assert (ip2 != None)
icmp1 = ip1.data
icmp2 = ip2.data
self.assertEqual(icmp1, icmp2, "packets should be equal but are not")
icmp1.code = 32
self.assertNotEqual(icmp1, icmp2,
"packets compare equal but should not")
def test_icmpv6_compare(self):
"""Test the underlying __compare__ functionality of the
packet. Two packets constructed from the same bytes should be
equal and two that are not should not be equal."""
file = PcapConnector("loopping6.out")
packet = file.read()
ip1 = ipv6(packet[file.dloff:len(packet)])
ip2 = ipv6(packet[file.dloff:len(packet)])
assert (ip1 != None)
assert (ip2 != None)
icmp1 = ip1.data
icmp2 = ip2.data
self.assertEqual(icmp1, icmp2, "packets should be equal but are not")
icmp1.code = 32
self.assertNotEqual(icmp1, icmp2,
"packets compare equal but should not")
def test_ipv6(self):
# create one packet, copy its bytes, then compare their fields
ip = ipv6()
assert (ip != None)
ip.traffic_class = 1
ip.flow = 0
ip.length = 64
ip.next_header = 6
ip.hop = 64
ip.src = inet_pton(AF_INET6, "::1")
ip.dst = inet_pton(AF_INET6, "::1")
# Create a packet to compare against
ipnew = ipv6()
ipnew.decode(ip.bytes)
self.assertEqual(ip.bytes, ipnew.bytes, "bytes not equal")
for field in ip._fieldnames:
self.assertEqual(getattr(ip, field), getattr(ipnew, field), ("%s not equal" % field))
def test_icmpv6_ping(self):
import os
uname = os.uname()[0]
if uname == "FreeBSD":
devname = "edsc0"
elif uname == "Linux":
devname = "lo"
elif uname == "Darwin":
devname = "en0"
else:
print "unknown host os %s" % uname
return
e = ethernet()
e.type = 0x0800
e.src = "\x00\x00\x00\x00\x00\x00"
e.dst = "\xff\xff\xff\xff\xff\xff"
e.type = 0x0800
ip = ipv6()
ip.traffic_class = 1
ip.flow = 0
ip.length = 64
ip.next_header = IPV6_ICMP
ip.hop = 64
ip.src = inet_pton(AF_INET6, "::1")
ip.dst = inet_pton(AF_INET6, "::1")
icmp = icmpv6()
icmp.type = 128
icmp.code = 0
icmp.cksum = 0
ip.len = len(ip.bytes) + len(icmp.bytes)
packet = Chain([e, ip, icmp])
packet.calc_checksums()
packet.encode()
input = PcapConnector(devname)
input.setfilter("icmp6")
output = PcapConnector(devname)
assert (ip != None)
# XXX The use of IP triggers a bpf header format bug if used
# with loopback device on FreeBSD, so we use edsc(4) there.
n_out = output.write(packet.bytes, 42)
assert (n_out == 42)
packet_in = input.read()
assert (n_out == len(packet_in))
def test_ipv6(self):
# create one packet, copy its bytes, then compare their fields
ip = ipv6()
assert (ip != None)
ip.traffic_class = 1
ip.flow = 0
ip.length = 64
ip.next_header = 6
ip.hop = 64
ip.src = inet_pton(AF_INET6, "::1")
ip.dst = inet_pton(AF_INET6, "::1")
# Create a packet to compare against
ipnew = ipv6()
ipnew.decode(ip.bytes)
self.assertEqual(ip.bytes, ipnew.bytes, "bytes not equal")
for field in ip._fieldnames:
self.assertEqual(getattr(ip, field), getattr(ipnew, field),
("%s not equal" % field))
def executeTrigger(self, pkt):
"""
Execute the trigger action the pkt which satisfies the trigger's
action conditions.
@param pkt:
The packet against which a trigger is actioned
@return:
A trigger Chain for transmission, None if action is internal
"""
retChain = None
# Action based on trigger type
if self.action == Trigger.Trigger.STOP:
# Test if pkt is really a HTTP packet
(p, i) = pkt.chain().find_first_of(pcs.packets.http.httpResponse)
if not p:
self.logger.debug("HTTP trigger.STOP:\n%s" % pkt.chain())
raise PcapReplayError(Trigger.ERR_PCAPR_TRIGGER_INVALID,
'executeTrigger : Invalid trigger/pkt ' +
'pair execution')
# Create a terminating response chain for xmit by the caller
ether = pkt
e = ethernet()
e.dst = ether.src
e.src = ether.dst
e.type = ether.type
ip = pkt.data
if type(ip) == pcs.packets.ipv4.ipv4:
i = ipv4()
i.tos = ip.tos
i.protocol = ip.protocol
i.id = 0
i.flags = 0
elif type(ip) == pcs.packets.ipv6.ipv6:
i = ipv6()
i.traffic_class = ip.traffic_class
i.next_header = ip.next_header
i.src = ip.dst
i.dst = ip.src
tcp = pkt.data.data
t = pcs.packets.tcp.tcp()
t.sport = tcp.dport
t.dport = tcp.sport
t.reset = 1
t.ack = 1
t.ack_number = tcp.ack_number
t.sequence = tcp.sequence
t.data = None
retChain = pcs.Chain([e, i, t])
retChain.fixup()
return retChain
def ICMPv6_pack_message(iface, pkt_type):
#procedure to get iface address
#iface = 'wlan2' #interface
addrs = netifaces.ifaddresses(iface)
ll_src_addr = addrs[netifaces.AF_INET6][1]['addr']
ll_src_addr = ll_src_addr[:ll_src_addr.find('%')]
gl_src_addr = addrs[netifaces.AF_INET6][0]['addr']
#gl_src_addr = gl_src_addr[:gl_src_addr.find('%')]
#print gl_src_addr
#print ll_src_addr
# building ethernet header
e = ethernet()
mac = netifaces.ifaddresses(iface)[netifaces.AF_LINK][0]['addr'] #geting mac addr
e.src = ether_atob(mac)
e.dst = ether_atob('ff:ff:ff:ff:ff:ff')
e.type = 0x86dd #ETHERTYPE_IPV6
#building ipv6 packet basic info
ip6 = ipv6()
ip6.version = 6
#cs = icmp6.cksum(ip6) & 0xffff
# building ipv6 header
ip6.traffic_class = 0x0a
ip6.flow = 0
ip6.length = 50
ip6.next_header = 58#IPPROTO_ICMPV6
ip6.hop = 255
ip6.src = pcs.inet_pton(AF_INET6, ll_src_addr)
ip6.dst = pcs.inet_pton(AF_INET6, 'ff02::1')
# building icmpv6
icmp6 = icmpv6(ICMP6_ECHO_REQUEST) #ICMP6_ECHO_REPLY
icmp6.code = 0
icmp6.seq = 0
icmp6.id = 0x03e8
icmp6.checksum = 0x0 #kt.calc_checksums()
data = payload(payload = gl_src_addr) #message data
ip6.length = len(icmp6.getbytes()) + len(data) #recalculation of packet length
if(pkt_type == 0):
icmp6.cheksum = 0xf220
ip6.traffic_class = 0x0a
pkt = pcs.Chain([e, ip6, icmp6, data]) #appendin packet
else:
icmp6.checksum = 0xe91b
ip6.traffic_class = 0x0f
pkt = pcs.Chain([e, ip6, icmp6]) #appendin packet
#icmp6.checksum = pkt.calc_checksums()
pkt.encode()
#print pkt
return pkt
def test_icmpv6_ping(self):
import os
uname = os.uname()[0]
if uname == "FreeBSD":
devname = "edsc0"
elif uname == "Linux":
devname = "lo"
elif uname == "Darwin":
devname = "en0"
else:
print "unknown host os %s" % uname
return
e = ethernet()
e.type = 0x0800
e.src = "\x00\x00\x00\x00\x00\x00"
e.dst = "\xff\xff\xff\xff\xff\xff"
e.type = 0x0800
ip = ipv6()
ip.traffic_class = 1
ip.flow = 0
ip.length = 64
ip.next_header = IPV6_ICMP
ip.hop = 64
ip.src = inet_pton(AF_INET6, "::1")
ip.dst = inet_pton(AF_INET6, "::1")
icmp = icmpv6()
icmp.type = 128
icmp.code = 0
icmp.cksum = 0
ip.len = len(ip.bytes) + len(icmp.bytes)
packet = Chain([e, ip, icmp])
packet.calc_checksums()
packet.encode()
input = PcapConnector(devname)
input.setfilter("icmp6")
output = PcapConnector(devname)
assert (ip != None)
# XXX The use of IP triggers a bpf header format bug if used
# with loopback device on FreeBSD, so we use edsc(4) there.
n_out = output.write(packet.bytes, 42)
assert (n_out == 42)
packet_in = input.read()
assert (n_out == len(packet_in))
def test_icmpv6_read(self):
"""This test reads from a pre-stored pcap file generated with tcpdump and ping on the loopback interface."""
file = PcapConnector("loopping6.out")
packet = file.read()
ip = ipv6(packet[file.dloff:len(packet)])
assert (ip != None)
icmp = ip.data
self.assertEqual(icmp.type, ICMP6_ECHO_REQUEST,
"type not equal to %d" % icmp.type)
self.assertEqual(icmp.code, 0, "code not equal to 0")
def test_icmpv6_read(self):
"""This test reads from a pre-stored pcap file generated with tcpdump and ping on the loopback interface."""
file = PcapConnector("loopping6.out")
packet = file.read()
ip = ipv6(packet[file.dloff:len(packet)])
assert (ip != None)
icmp = ip.data
self.assertEqual(icmp.type, ICMP6_ECHO_REQUEST,
"type not equal to %d" % icmp.type)
self.assertEqual(icmp.code, 0, "code not equal to 0")
def test_ipv6_println(self):
"""This test reads from a pre-stored pcap file generated with
tcpdump and ping on the loopback interface and tests the
__str__ method to make sure the correct values are printed."""
file = PcapConnector("loopping6.out")
packet = file.read()
ip = ipv6(packet[file.dloff:len(packet)])
assert (ip != None)
test_string = "<IPv6: version: 6, traffic_class: 0, flow: 0, length: 16, next_header: 58, hop: 64, src: \'\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x01\', dst: \'\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x01\'>"
string = ip.println()
self.assertEqual(string, test_string,
"strings are not equal \nexpected %s \ngot %s " %
(test_string, string))
def test_ipv6_print(self):
"""This test reads from a pre-stored pcap file generated with
tcpdump and ping on the loopback interface and tests the
__str__ method to make sure the correct values are printed."""
file = PcapConnector("loopping6.out")
packet = file.read()
ip = ipv6(packet[file.dloff:len(packet)])
assert (ip != None)
test_string = "version 6\ntraffic_class 0\nflow 0\nlength 16\nnext_header 58\nhop 64\nsrc ::1\ndst ::1\n"
string = ip.__str__()
self.assertEqual(string, test_string,
"strings are not equal \nexpected %s \ngot %s " %
(test_string, string))
def createIpv6Pkt(self, ipproto=6, layer1=None, layer2=None):
e = ethernet()
e.dst = self.dmac
e.src = self.smac
e.type = 0x86dd
i = ipv6()
i.next_header = ipproto
i.src = self.src6
i.dst = self.dst6
e.data = i
i.data = layer1
layer1.data = layer2
if layer2 == None:
retChain = pcs.Chain([e, i, layer1]).packets[0]
else:
retChain = pcs.Chain([e, i, layer1, layer2]).packets[0]
return retChain
def test_ipv6_println(self):
"""This test reads from a pre-stored pcap file generated with
tcpdump and ping on the loopback interface and tests the
__str__ method to make sure the correct values are printed."""
file = PcapConnector("loopping6.out")
packet = file.read()
ip = ipv6(packet[file.dloff:len(packet)])
assert (ip != None)
test_string = "<IPv6: version: 6, traffic_class: 0, flow: 0, length: 16, next_header: 58, hop: 64, src: \'\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x01\', dst: \'\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x00\\x01\'>"
string = ip.println()
self.assertEqual(
string, test_string,
"strings are not equal \nexpected %s \ngot %s " %
(test_string, string))
def test_ipv6_print(self):
"""This test reads from a pre-stored pcap file generated with
tcpdump and ping on the loopback interface and tests the
__str__ method to make sure the correct values are printed."""
file = PcapConnector("loopping6.out")
packet = file.read()
ip = ipv6(packet[file.dloff:len(packet)])
assert (ip != None)
test_string = "version 6\ntraffic_class 0\nflow 0\nlength 16\nnext_header 58\nhop 64\nsrc ::1\ndst ::1\n"
string = ip.__str__()
self.assertEqual(
string, test_string,
"strings are not equal \nexpected %s \ngot %s " %
(test_string, string))
def test_icmpv6_print(self):
"""This test reads from a pre-stored pcap file generated with
tcpdump and ping on the loopback interface and tests the
__str__ method to make sure the correct values are printed."""
file = PcapConnector("loopping6.out")
packet = file.read()
ip = ipv6(packet[file.dloff:len(packet)])
assert (ip != None)
icmp = ip.data
#test_string = "ICMPv6\ntype 8\ncode 0\nchecksum 60550\n"
test_string = "ICMPv6 Echo Request\ntype 128\ncode 0\nchecksum 60454\n"
string = icmp.__str__()
self.assertEqual(string, test_string,
"strings are not equal \nexpected %s \ngot %s " %
(test_string, string))
def test_ipv6_read(self):
"""This test reads from a pre-stored pcap file generated with tcpdump and ping on the loopback interface."""
file = PcapConnector("loopping6.out")
packet = file.read()
ip = ipv6(packet[file.dloff:len(packet)])
assert (ip != None)
self.assertEqual(ip.version, 6, "version not equal %d" % ip.version)
self.assertEqual(ip.traffic_class, 0,
"traffic_class not equal %d" % ip.traffic_class)
self.assertEqual(ip.flow, 0, "flow not equal %d" % ip.flow)
self.assertEqual(ip.length, 16, "length not equal %d" % ip.length)
self.assertEqual(ip.next_header, 58,
"next_header not equal %d" % ip.next_header)
self.assertEqual(ip.hop, 64, "hop not equal %d" % ip.hop)
self.assertEqual(ip.src, inet_pton(AF_INET6, "::1"),
"src not equal %s" % ip.src)
self.assertEqual(ip.dst, inet_pton(AF_INET6, "::1"),
"dst not equal %s" % ip.dst)
def test_icmpv6_print(self):
"""This test reads from a pre-stored pcap file generated with
tcpdump and ping on the loopback interface and tests the
__str__ method to make sure the correct values are printed."""
file = PcapConnector("loopping6.out")
packet = file.read()
ip = ipv6(packet[file.dloff:len(packet)])
assert (ip != None)
icmp = ip.data
#test_string = "ICMPv6\ntype 8\ncode 0\nchecksum 60550\n"
test_string = "ICMPv6 Echo Request\ntype 128\ncode 0\nchecksum 60454\n"
string = icmp.__str__()
self.assertEqual(
string, test_string,
"strings are not equal \nexpected %s \ngot %s " %
(test_string, string))
def test_ipv6_read(self):
"""This test reads from a pre-stored pcap file generated with tcpdump and ping on the loopback interface."""
file = PcapConnector("loopping6.out")
packet = file.read()
ip = ipv6(packet[file.dloff:len(packet)])
assert (ip != None)
self.assertEqual(ip.version, 6,
"version not equal %d" % ip.version)
self.assertEqual(ip.traffic_class, 0,
"traffic_class not equal %d" % ip.traffic_class)
self.assertEqual(ip.flow, 0, "flow not equal %d" % ip.flow)
self.assertEqual(ip.length, 16, "length not equal %d" % ip.length)
self.assertEqual(ip.next_header, 58,
"next_header not equal %d" % ip.next_header)
self.assertEqual(ip.hop, 64, "hop not equal %d" % ip.hop)
self.assertEqual(ip.src, inet_pton(AF_INET6, "::1"),
"src not equal %s" % ip.src)
self.assertEqual(ip.dst, inet_pton(AF_INET6, "::1"),
"dst not equal %s" % ip.dst)
def main():
from optparse import OptionParser
parser = OptionParser()
parser.add_option("-c", "--count",
dest="count", default=1,
help="Stop after sending (and recieving) count ECHO_RESPONSE packets..")
parser.add_option("-D", "--dont_fragment",
dest="df", default=False,
help="Set the Don't Fragment bit.")
parser.add_option("-s", "--ip_source",
dest="ip_source", default=None,
help="The IP source address.")
parser.add_option("-d", "--ip_dest",
dest="ip_dest", default=None,
help="The IP destination address.")
parser.add_option("-I", "--ether_iface",
dest="ether_iface", default=None,
help="The name of the source interface.")
parser.add_option("-e", "--ether_source",
dest="ether_source", default=None,
help="The host Ethernet source address.")
parser.add_option("-g", "--ether_dest",
dest="ether_dest", default=None,
help="The gateway Ethernet destination address.")
parser.add_option("-r", "--rt_hop",
dest="hop", default="::",
help="The intermediate router address.")
(options, args) = parser.parse_args()
rtcount = 1
# plen is 8 + rtcount * 16 for rt hdr, 8 for ICMP, 6 for foobar
plen = 8 + rtcount * 16 + 8 + 6
c = ethernet(src=ether_atob(options.ether_source), \
dst=ether_atob(options.ether_dest)) / \
ipv6(hop=64, next_header = 43, length = plen, \
src=inet_pton(AF_INET6, options.ip_source), \
dst=inet_pton(AF_INET6, options.ip_dest)) / \
ipv6ext.rt_ext(next_header = 58, \
addr1 = inet_pton(AF_INET6, options.hop)) / \
icmpv6(type=ICMP6_ECHO_REQUEST, id=12345) / \
payload(payload="foobar")
c.calc_lengths()
#
# Increment ICMP echo sequence number with each iteration.
#
output = PcapConnector(options.ether_iface)
ip = c.packets[1]
icmpecho = c.packets[3]
count = int(options.count)
while (count > 0):
# c.calc_checksums()
# icmpecho.cksum = icmpv6.cksum(icmpecho, ip)
# icmpecho.calc_checksum()
c.encode()
out = output.write(c.bytes, len(c.bytes))
# packet = input.read()
# print packet
sleep(1)
count -= 1
icmpecho.sequence += 1
def main():
from optparse import OptionParser
parser = OptionParser()
parser.add_option("-c", "--count",
dest="count", default=1,
help="Stop after sending (and recieving) count ECHO_RESPONSE packets..")
parser.add_option("-D", "--dont_fragment",
dest="df", default=False,
help="Set the Don't Fragment bit.")
parser.add_option("-s", "--ip_source",
dest="ip_source", default=None,
help="The IP source address.")
parser.add_option("-d", "--ip_dest",
dest="ip_dest", default=None,
help="The IP destination address.")
parser.add_option("-I", "--ether_iface",
dest="ether_iface", default=None,
help="The name of the source interface.")
parser.add_option("-e", "--ether_source",
dest="ether_source", default=None,
help="The host Ethernet source address.")
parser.add_option("-g", "--ether_dest",
dest="ether_dest", default=None,
help="The gateway Ethernet destination address.")
parser.add_option("-r", "--rt_hop",
dest="hop", default="::",
help="The intermediate router address.")
(options, args) = parser.parse_args()
rtcount = 1
# plen is 8 + rtcount * 16 for rt hdr, 8 for ICMP, 6 for foobar
plen = 8 + rtcount * 16 + 8 + 6
c = ethernet(src=ether_atob(options.ether_source), \
dst=ether_atob(options.ether_dest)) / \
ipv6(hop=64, next_header = 43, length = plen, \
src=inet_pton(AF_INET6, options.ip_source), \
dst=inet_pton(AF_INET6, options.ip_dest)) / \
ipv6ext.rt_ext(next_header = 58, \
addr1 = inet_pton(AF_INET6, options.hop)) / \
icmpv6(type=ICMP6_ECHO_REQUEST, id=12345) / \
payload(payload="foobar")
c.calc_lengths()
#
# Increment ICMP echo sequence number with each iteration.
#
output = PcapConnector(options.ether_iface)
ip = c.packets[1]
icmpecho = c.packets[3]
count = int(options.count)
while (count > 0):
# c.calc_checksums()
# icmpecho.cksum = icmpv6.cksum(icmpecho, ip)
# icmpecho.calc_checksum()
c.encode()
out = output.write(c.bytes, len(c.bytes))
# packet = input.read()
# print packet
sleep(1)
count -= 1
icmpecho.sequence += 1