def __init__(self):
self.logMessage = LogMessage()
self.const = Constant()
self.processSensorData = ProcessSensorReading()
self.processConfigFile = ProcessConfigFile()
self.GPIOPins = GPIOPin()
self.bus = smbus.SMBus(1)
def __init__(self):
self.logMessage = LogMessage()
self.const = Constant()
self.sim = SIMOperations()
self.messages = Message()
self.processConfigFile = ProcessConfigFile()
self.processSensorData = ProcessSensorReading()
self.bus = smbus.SMBus(1)
def __init__(self):
self.logMessage = LogMessage()
self.const = Constant()
self.sim = SIMOperations()
self.messages = Message()
self.processConfigFile = ProcessConfigFile()
self.messageFilter = MessageFilter()
self.GPIOPins = GPIOPin()
if self.const.live:
self.lcd = RPILCD()
def __init__(self):
self.logMessage = LogMessage()
self.const = Constant()
self.sim = SIMOperations()
self.messages = Message()
self.processConfigFile = ProcessConfigFile()
self.processSensorData = ProcessSensorReading()
self.bus = smbus.SMBus(1)
class InstantAction:
logMessage = ''
const = ''
sim = ''
messages = ''
messageFilter = ''
processConfigFile = ''
processSensorData = ''
def __init__(self):
self.logMessage = LogMessage()
self.const = Constant()
self.sim = SIMOperations()
self.messages = Message()
self.processConfigFile = ProcessConfigFile()
self.processSensorData = ProcessSensorReading()
self.messageFilter = MessageFilter()
def run(self):
try:
if self.processConfigFile.checkValuesInConfigFile():
if self.sim.checkSIMCard():
while True:
messages = self.sim.readUnreadMessages()
if self.messageFilter.readCheckBalance(messages):
self.sim.sendSMSCheckBalance()
time.sleep(30)
lastReadMessage = self.sim.readFirstUnreadMessages(
)
message = self.messageFilter.readBalanceMessage(
lastReadMessage)
self.sim.sendSMS(message)
time.sleep(5)
self.sim.deleteReadMessages()
elif self.messageFilter.readUsedWater(messages):
# get used water
waterFlow = self.processSensorData.getWaterUsed()
currentDate = time.strftime("%d.%m.%Y,%H:%M")
message = 'Dear Digital Farmer, Water used is %s litres as of %s' % (
str(waterFlow), str(currentDate))
self.sim.sendSMS(message)
time.sleep(5)
self.sim.deleteReadMessages()
else:
self.logMessage.log(
'No SIM Card detected - Instant Action')
self.run()
else:
self.logMessage.log(
'Invalid configuration data / No file found - Instant Action'
)
self.run()
except:
self.logMessage.log('Error in Instant Action')
time.sleep(60)
self.run()
def __init__(self):
self.logMessage = LogMessage()
self.const = Constant()
self.sim = SIMOperations()
self.messages = Message()
self.processConfigFile = ProcessConfigFile()
self.messageFilter = MessageFilter()
self.GPIOPins = GPIOPin()
if self.const.live:
self.lcd = RPILCD()
class InstantAction:
logMessage = ''
const = ''
sim = ''
messages = ''
messageFilter = ''
processConfigFile = ''
processSensorData = ''
def __init__(self):
self.logMessage = LogMessage()
self.const = Constant()
self.sim = SIMOperations()
self.messages = Message()
self.processConfigFile = ProcessConfigFile()
self.processSensorData = ProcessSensorReading()
self.messageFilter = MessageFilter()
def run(self):
try:
if self.processConfigFile.checkValuesInConfigFile():
if self.sim.checkSIMCard():
while True:
messages = self.sim.readUnreadMessages()
if self.messageFilter.readCheckBalance(messages):
self.sim.sendSMSCheckBalance()
time.sleep(30)
lastReadMessage = self.sim.readFirstUnreadMessages()
message = self.messageFilter.readBalanceMessage(lastReadMessage)
self.sim.sendSMS(message)
time.sleep(5)
self.sim.deleteReadMessages()
elif self.messageFilter.readUsedWater(messages):
# get used water
waterFlow = self.processSensorData.getWaterUsed()
currentDate = time.strftime("%d.%m.%Y,%H:%M")
message = 'Dear Digital Farmer, Water used is %s litres as of %s' % (str(waterFlow), str(currentDate))
self.sim.sendSMS(message)
time.sleep(5)
self.sim.deleteReadMessages()
else:
self.logMessage.log('No SIM Card detected - Instant Action')
self.run()
else:
self.logMessage.log('Invalid configuration data / No file found - Instant Action')
self.run()
except:
self.logMessage.log('Error in Instant Action')
time.sleep(60)
self.run()
class Configuration:
logMessage = ''
const = ''
sim = ''
messages = ''
messageFilter = ''
processConfigFile = ''
lcd = ''
GPIOPins = ''
def __init__(self):
self.logMessage = LogMessage()
self.const = Constant()
self.sim = SIMOperations()
self.messages = Message()
self.processConfigFile = ProcessConfigFile()
self.messageFilter = MessageFilter()
self.GPIOPins = GPIOPin()
if self.const.live:
self.lcd = RPILCD()
def run(self):
try:
if not self.sim.checkSIMCard():
self.logMessage.log(self.messages.ERROR_INSERT_SIM)
self.displayOnLcd('ERROR100.')
time.sleep(1)
self.displayOnLcd('Please insert\nyour SIM')
time.sleep(1)
self.GPIOPins.ErrorLED()
else:
if not self.processConfigFile.checkValuesInConfigFile():
self.logMessage.log(self.messages.ERROR_CONFIG)
self.displayOnLcd('Hello \nDigital farmer')
time.sleep(3)
self.displayOnLcd('ILLUMINUM \nGREEN HOUSE TECH')
time.sleep(3)
self.displayOnLcd('ERROR101')
time.sleep(1)
self.displayOnLcd('Kindly\nconfigure')
time.sleep(1)
self.displayOnLcd('your system')
self.GPIOPins.ErrorLED()
self.setConfigData()
except:
self.logMessage.log('Error in main configuration section')
pass
def setConfigData(self):
try:
setContactNumber = False
setLowerLimit = False
setUpperLimit = False
while True:
if setContactNumber and setLowerLimit and setUpperLimit:
self.GPIOPins.FullyFunctionalLED()
break
if not setContactNumber:
if self.setContactNumberToConfigFile():
setContactNumber = True
phone = self.processConfigFile.readPhoneNumber()
message = self.messages.SMS_SET_MOBILE % (str(phone))
self.sim.sendSMS(message)
time.sleep(1)
# self.sim.sendSMS(self.messages.SMS_SETUP_LOWER_LIMIT)
time.sleep(1)
self.sim.sendSMS('Kindly set up your Lower limit Setting for Soil Moisture')
time.sleep(1)
self.sim.deleteReadMessages()
time.sleep(1)
elif setContactNumber and not setLowerLimit and not setUpperLimit:
if self.setLowerLimitToConfigFile():
setLowerLimit = True
lowerLimit = self.processConfigFile.readLowerLimit()
message = self.messages.SMS_CONFIRM_LOWER_LIMIT % (str(lowerLimit))
self.sim.sendSMS(message)
time.sleep(2)
# self.sim.sendSMS(self.messages.SMS_SETUP_UPPER_LIMIT)
self.sim.sendSMS('Kindly set up your Upper limit')
time.sleep(2)
self.sim.deleteReadMessages()
time.sleep(1)
elif setLowerLimit and setContactNumber:
if setLowerLimit and self.setUpperLimitToConfigFile():
setUpperLimit = True
upperLimit = self.processConfigFile.readUpperLimit()
message = self.messages.SMS_CONFIRM_UPPER_LIMIT % (str(upperLimit))
self.sim.sendSMS(message)
time.sleep(2)
# self.sim.sendSMS(self.messages.SMS_CONGRATULATIONS)
self.sim.sendSMS('CONGRATULATIONS! You have now set up your Smart Mobile Farm')
time.sleep(1)
self.sim.deleteReadMessages()
time.sleep(1)
except:
self.logMessage.log('Error in setting configuration')
pass
return True
def setContactNumberToConfigFile(self):
status = False
try:
messages = self.sim.readUnreadMessages()
contactNumber = self.messageFilter.readContactNumber(messages)
if contactNumber:
self.logMessage.log('Contact number found : ' + str(contactNumber))
self.processConfigFile.updateContactNumber(contactNumber)
status = True
except:
self.logMessage.log('Error in setting contact number')
pass
return status
def setLowerLimitToConfigFile(self):
status = False
try:
messages = self.sim.readUnreadMessages()
lowerLimit = self.messageFilter.readLowerLimit(messages)
if lowerLimit:
self.logMessage.log('lower limit found : ' + str(lowerLimit))
self.processConfigFile.updateLowerLimitNumber(str(lowerLimit))
status = True
except:
self.logMessage.log('Error in setting lower limit')
pass
return status
def setUpperLimitToConfigFile(self):
status = False
try:
messages = self.sim.readUnreadMessages()
upperLimit = self.messageFilter.readUpperLimit(messages)
if upperLimit:
self.logMessage.log('upper limit found : ' + str(upperLimit))
self.processConfigFile.updateUpperLimitNumber(str(upperLimit))
status = True
except:
self.logMessage.log('Error in setting upper limit')
pass
return status
# display text on LCD screen
def displayOnLcd(self, text):
if self.const.live:
self.lcd.clear()
self.lcd.message(text)
else:
print text
class Configuration:
logMessage = ''
const = ''
sim = ''
messages = ''
messageFilter = ''
processConfigFile = ''
lcd = ''
GPIOPins = ''
def __init__(self):
self.logMessage = LogMessage()
self.const = Constant()
self.sim = SIMOperations()
self.messages = Message()
self.processConfigFile = ProcessConfigFile()
self.messageFilter = MessageFilter()
self.GPIOPins = GPIOPin()
if self.const.live:
self.lcd = RPILCD()
def run(self):
try:
if not self.sim.checkSIMCard():
self.logMessage.log(self.messages.ERROR_INSERT_SIM)
self.displayOnLcd('ERROR100.')
time.sleep(1)
self.displayOnLcd('Please insert\nyour SIM')
time.sleep(1)
self.GPIOPins.ErrorLED()
else:
if not self.processConfigFile.checkValuesInConfigFile():
self.logMessage.log(self.messages.ERROR_CONFIG)
self.displayOnLcd('Hello \nDigital farmer')
time.sleep(3)
self.displayOnLcd('ILLUMINUM \nGREEN HOUSE TECH')
time.sleep(3)
self.displayOnLcd('ERROR101')
time.sleep(1)
self.displayOnLcd('Kindly\nconfigure')
time.sleep(1)
self.displayOnLcd('your system')
self.GPIOPins.ErrorLED()
self.setConfigData()
except:
self.logMessage.log('Error in main configuration section')
pass
def setConfigData(self):
try:
setContactNumber = False
setLowerLimit = False
setUpperLimit = False
while True:
if setContactNumber and setLowerLimit and setUpperLimit:
self.GPIOPins.FullyFunctionalLED()
break
if not setContactNumber:
if self.setContactNumberToConfigFile():
setContactNumber = True
phone = self.processConfigFile.readPhoneNumber()
message = self.messages.SMS_SET_MOBILE % (str(phone))
self.sim.sendSMS(message)
time.sleep(1)
# self.sim.sendSMS(self.messages.SMS_SETUP_LOWER_LIMIT)
time.sleep(1)
self.sim.sendSMS(
'Kindly set up your Lower limit Setting for Soil Moisture'
)
time.sleep(1)
self.sim.deleteReadMessages()
time.sleep(1)
elif setContactNumber and not setLowerLimit and not setUpperLimit:
if self.setLowerLimitToConfigFile():
setLowerLimit = True
lowerLimit = self.processConfigFile.readLowerLimit()
message = self.messages.SMS_CONFIRM_LOWER_LIMIT % (
str(lowerLimit))
self.sim.sendSMS(message)
time.sleep(2)
# self.sim.sendSMS(self.messages.SMS_SETUP_UPPER_LIMIT)
self.sim.sendSMS('Kindly set up your Upper limit')
time.sleep(2)
self.sim.deleteReadMessages()
time.sleep(1)
elif setLowerLimit and setContactNumber:
if setLowerLimit and self.setUpperLimitToConfigFile():
setUpperLimit = True
upperLimit = self.processConfigFile.readUpperLimit()
message = self.messages.SMS_CONFIRM_UPPER_LIMIT % (
str(upperLimit))
self.sim.sendSMS(message)
time.sleep(2)
# self.sim.sendSMS(self.messages.SMS_CONGRATULATIONS)
self.sim.sendSMS(
'CONGRATULATIONS! You have now set up your Smart Mobile Farm'
)
time.sleep(1)
self.sim.deleteReadMessages()
time.sleep(1)
except:
self.logMessage.log('Error in setting configuration')
pass
return True
def setContactNumberToConfigFile(self):
status = False
try:
messages = self.sim.readUnreadMessages()
contactNumber = self.messageFilter.readContactNumber(messages)
if contactNumber:
self.logMessage.log('Contact number found : ' +
str(contactNumber))
self.processConfigFile.updateContactNumber(contactNumber)
status = True
except:
self.logMessage.log('Error in setting contact number')
pass
return status
def setLowerLimitToConfigFile(self):
status = False
try:
messages = self.sim.readUnreadMessages()
lowerLimit = self.messageFilter.readLowerLimit(messages)
if lowerLimit:
self.logMessage.log('lower limit found : ' + str(lowerLimit))
self.processConfigFile.updateLowerLimitNumber(str(lowerLimit))
status = True
except:
self.logMessage.log('Error in setting lower limit')
pass
return status
def setUpperLimitToConfigFile(self):
status = False
try:
messages = self.sim.readUnreadMessages()
upperLimit = self.messageFilter.readUpperLimit(messages)
if upperLimit:
self.logMessage.log('upper limit found : ' + str(upperLimit))
self.processConfigFile.updateUpperLimitNumber(str(upperLimit))
status = True
except:
self.logMessage.log('Error in setting upper limit')
pass
return status
# display text on LCD screen
def displayOnLcd(self, text):
if self.const.live:
self.lcd.clear()
self.lcd.message(text)
else:
print text
class DailyReport:
logMessage = ''
const = ''
sim = ''
messages = ''
processSensorData = ''
processConfigFile = ''
bus = ''
address = 0x04
def __init__(self):
self.logMessage = LogMessage()
self.const = Constant()
self.sim = SIMOperations()
self.messages = Message()
self.processConfigFile = ProcessConfigFile()
self.processSensorData = ProcessSensorReading()
self.bus = smbus.SMBus(1)
def run(self):
try:
if self.sim.checkSIMCard():
if self.processConfigFile.checkValuesInConfigFile():
data = self.processSensorData.getSensorData()
if len(data) > 0:
currentTime = time.strftime("%d.%m.%Y %H:%M:%S")
message1 = 'Dear Digital Farmer, here is your farm’s status;'
message2 = 'Device ID: %s \n Temperature: %s \n Humidity: %s ' % (
'SMF001', str(data[0]), str(data[1]))
message3 = 'Soil Moisture: %s \n Liters of water irrigated: %s ' % (
str(data[2]), str(data[3]))
message4 = 'State of Valve: %s \n Battery voltage: %s \n Date and Time: %s' % (
str(data[5]), str(data[4]), str(currentTime))
self.sim.sendSMS(message1)
time.sleep(2)
self.sim.sendSMS(message2)
time.sleep(2)
self.sim.sendSMS(message3)
time.sleep(2)
self.sim.sendSMS(message4)
self.logMessage.log(
'Running daily schedule : (message : ' +
str(message1) + str(message2) + str(message3) +
str(message4) + ' )')
self.processSensorData.updateWaterUsed('0')
# send alert to arduino to reset water usage value
self.writeNumber(self.const.SENSOR_CODE_WATER_RESET)
time.sleep(1)
water = self.readNumber()
self.processSensorData.updateWaterUsed(water)
else:
self.logMessage.log('No sensor data saved')
else:
self.logMessage.log(
'Invalid configuration data / No file found - Daily report'
)
else:
self.logMessage.log(
'Error No SIM Card detected - Daily report')
except:
self.logMessage.log('Error in Daily Report')
def writeNumber(self, value):
try:
self.bus.write_byte(self.address, value)
except:
pass
return -1
def readNumber(self):
number = 0
try:
number = self.bus.read_byte(self.address)
except:
pass
return number
class ReadSensorData:
logMessage = ''
const = ''
processSensorData = ''
processConfigFile = ''
GPIOPins = ''
bus = ''
address = 0x04
def __init__(self):
self.logMessage = LogMessage()
self.const = Constant()
self.processSensorData = ProcessSensorReading()
self.processConfigFile = ProcessConfigFile()
self.GPIOPins = GPIOPin()
self.bus = smbus.SMBus(1)
def run(self):
try:
if self.processConfigFile.checkValuesInConfigFile():
self.i2cRead()
else:
self.logMessage.log('Invalid configuration data / No file found - Read Sensor Data')
time.sleep(40)
self.run()
except:
self.logMessage.log('Error on reading sensor data frequently')
time.sleep(40)
self.run()
def i2cRead(self):
try:
while True:
self.writeNumber(self.const.SENSOR_CODE_TEMPERATURE)
time.sleep(1)
temperature = self.readNumber()
self.processSensorData.updateTemperature(str(temperature))
self.writeNumber(self.const.SENSOR_CODE_HUMIDITY)
time.sleep(1)
humidity = self.readNumber()
self.processSensorData.updateHumidity(str(humidity))
self.writeNumber(self.const.SENSOR_CODE_MOISTURE)
time.sleep(1)
moisture = self.readNumber()
self.processSensorData.updateMoisture(str(moisture))
self.writeNumber(self.const.SENSOR_CODE_WATER)
time.sleep(1)
water = self.readNumber()
self.processSensorData.updateWaterUsed(str(water))
self.writeNumber(self.const.SENSOR_CODE_BATTERY)
time.sleep(1)
battery = self.readNumber()
self.processSensorData.updateBattery(str(battery))
# power valve based on soil moisture
self.checkSoilMoisture(moisture)
except:
self.logMessage.log('Error on sending request to Arduino - Read Sensor Data')
pass
def checkSoilMoisture(self, moisture):
try:
if moisture > 0:
lowerLimit = self.processConfigFile.readLowerLimit()
higherLimit = self.processConfigFile.readUpperLimit()
if moisture < lowerLimit:
self.GPIOPins.powerOnValve()
self.processSensorData.updateStateOfValve('ON')
elif moisture > higherLimit:
self.GPIOPins.powerOffValve()
self.processSensorData.updateStateOfValve('OFF')
except:
self.logMessage.log('Error on checking soil moisture - Read Sensor Data')
pass
def writeNumber(self, value):
try:
self.bus.write_byte(self.address, value)
except:
pass
return -1
def readNumber(self):
number = 0
try:
number = self.bus.read_byte(self.address)
except:
pass
return number
class DailyReport:
logMessage = ''
const = ''
sim = ''
messages = ''
processSensorData = ''
processConfigFile = ''
bus = ''
address = 0x04
def __init__(self):
self.logMessage = LogMessage()
self.const = Constant()
self.sim = SIMOperations()
self.messages = Message()
self.processConfigFile = ProcessConfigFile()
self.processSensorData = ProcessSensorReading()
self.bus = smbus.SMBus(1)
def run(self):
try:
if self.sim.checkSIMCard():
if self.processConfigFile.checkValuesInConfigFile():
data = self.processSensorData.getSensorData()
if len(data) > 0:
currentTime = time.strftime("%d.%m.%Y %H:%M:%S")
message1 = 'Dear Digital Farmer, here is your farm’s status;'
message2 = 'Device ID: %s \n Temperature: %s \n Humidity: %s ' % ('SMF001', str(data[0]), str(data[1]))
message3 = 'Soil Moisture: %s \n Liters of water irrigated: %s ' % (str(data[2]), str(data[3]))
message4 = 'State of Valve: %s \n Battery voltage: %s \n Date and Time: %s' % (str(data[5]), str(data[4]), str(currentTime))
self.sim.sendSMS(message1)
time.sleep(2)
self.sim.sendSMS(message2)
time.sleep(2)
self.sim.sendSMS(message3)
time.sleep(2)
self.sim.sendSMS(message4)
self.logMessage.log('Running daily schedule : (message : ' + str(message1) + str(message2) + str(message3) + str(message4) + ' )')
self.processSensorData.updateWaterUsed('0')
# send alert to arduino to reset water usage value
self.writeNumber(self.const.SENSOR_CODE_WATER_RESET)
time.sleep(1)
water = self.readNumber()
self.processSensorData.updateWaterUsed(water)
else:
self.logMessage.log('No sensor data saved')
else:
self.logMessage.log('Invalid configuration data / No file found - Daily report')
else:
self.logMessage.log('Error No SIM Card detected - Daily report')
except:
self.logMessage.log('Error in Daily Report')
def writeNumber(self, value):
try:
self.bus.write_byte(self.address, value)
except:
pass
return -1
def readNumber(self):
number = 0
try:
number = self.bus.read_byte(self.address)
except:
pass
return number
