def SVM(X, Y, ktype): svmScores = [] kf = KFold(n=len(Y), n_folds = nfolds) for train_index, test_index in kf: X_train, X_test = X[train_index], X[test_index] y_train, y_test = Y[train_index], Y[test_index] # SVC fit clf = svm.SVC(C=1.0, kernel= ktype) clf.fit(X_train, y_train) svmScores.append(clf.score(X_test, y_test)) print "scores" , svmScores xx, yy = np.meshgrid(np.linspace(-10, 10, 500), np.linspace(-10, 10, 500)) Z = clf.decision_function(np.c_[xx.ravel(), yy.ravel()]) Z = Z.reshape(xx.shape) plt.contourf(xx, yy, Z, levels=np.linspace(Z.min(), 0, 7), cmap=pl.cm.Blues_r) a = pl.contour(xx, yy, Z, levels=[0], linewidths=2, colors='red') pl.contourf(xx, yy, Z, levels=[0, Z.max()], colors='orange') colors = ['w' if i == 0 else 'k' for i in Y] plt.scatter(X[:,0], X[:,1], color = colors, alpha=1.0) # Plt that plot yoz. and make the xylim not shitty plt.xlim([np.min(X)-5,np.max(X)+5]) plt.ylim([np.min(X)-5,np.max(X)+5]) plt.show()
def Contour(X,Y,Z, label='', levels=None, cmapidx=0, colors=None, fmt='%g', lwd=1, fsz=10,
inline=0, wire=True, cbar=True, zorder=None, markZero='', clabels=True):
"""
Plot contour
============
"""
L = None
if levels != None:
if not hasattr(levels, "__iter__"): # not a list or array...
levels = linspace(Z.min(), Z.max(), levels)
if colors==None:
c1 = contourf (X,Y,Z, cmap=Cmap(cmapidx), levels=levels, zorder=None)
else:
c1 = contourf (X,Y,Z, colors=colors, levels=levels, zorder=None)
if wire:
c2 = contour (X,Y,Z, colors=('k'), levels=levels, linewidths=[lwd], zorder=None)
if clabels:
clabel (c2, inline=inline, fontsize=fsz)
if cbar:
cb = colorbar (c1, format=fmt)
cb.ax.set_ylabel (label)
if markZero:
c3 = contour(X,Y,Z, levels=[0], colors=[markZero], linewidths=[2])
if clabels:
clabel(c3, inline=inline, fontsize=fsz)
def doSubplot(multiplier=1.0, layout=(-1, -1)):
pylab.contour(xs, ys, vr_obs[0][bounds], colors='k', linestyles='-', levels=np.arange(-50, 60, 10))
pylab.contour(xs, ys, model_obs['vr'][0][bounds], colors='k', linestyles='--', levels=np.arange(-50, 60, 10))
pylab.contourf(xs, ys, (model_obs['vr'][0] - vr_obs[0])[bounds], cmap=matplotlib.cm.get_cmap('RdBu_r'), zorder=-1)
grid.drawPolitical()
return
def plotData():
marr = fetchData()
textsize = 18
yticks([0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10], xt, size=textsize)
ylabel("Periode [s]", size=textsize)
xticks([0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10], yt, size=textsize)
xlabel("Ausstattung [%]", size=textsize)
title(
"Abweichung der Geschwindigkeit zwischen FCD und des simulierten Verkehrs", size=textsize)
# title("Relative Anzahl erfasster Kanten", size=textsize)
figtext(0.7865, 0.92, '[%]', size=textsize)
# levels=arange(mmin-mmin*.1, mmax+mmax*.1, (mmax-mmin)/10.))
contourf(marr, 50)
# set fontsize and ticks for the colorbar:
if showVal == EDGENO:
cb = colorbar(ticks=[0, 10, 20, 30, 40, 50, 60, 70, 80, 90, 100])
else:
# cb = colorbar(ticks=range(17))
cb = colorbar()
for t in cb.ax.get_yticklabels(): # set colorbar fontsize of each tick
t.set_fontsize(textsize)
show()
def main():
base_path = "/caps2/tsupinie/1kmf-control/"
temp = goshen_1km_temporal(start=14400, end=14400)
grid = goshen_1km_grid()
n_ens_members = 40
np.seterr(all='ignore')
ens = loadEnsemble(base_path, [ 11 ], temp.getTimes(), ([ 'pt', 'p' ], computeDensity))
ens = ens[0, 0]
zs = decompressVariable(nio.open_file("%s/ena001.hdfgrdbas" % base_path, mode='r', format='hdf').variables['zp'])
xs, ys = grid.getXY()
xs = xs[np.newaxis, ...].repeat(zs.shape[0], axis=0)
ys = ys[np.newaxis, ...].repeat(zs.shape[0], axis=0)
eff_buoy = effectiveBuoyancy(ens, (zs, ys, xs), plane={'z':10})
print eff_buoy
pylab.figure()
pylab.contourf(xs[0], ys[0], eff_buoy[0], cmap=matplotlib.cm.get_cmap('RdBu_r'))
pylab.colorbar()
grid.drawPolitical()
pylab.suptitle("Effective Buoyancy")
pylab.savefig("eff_buoy.png")
pylab.close()
return
def render(
src: array,
height: int,
width: int,
isostep: int,
dpi: int,
output_file_path: Path,
) -> None:
height = height // MAP_SCALE
width = width // MAP_SCALE
image_size = (
(width / dpi),
(height / dpi),
)
data = np.array(src).reshape((height, width))
isohypses = list(range(0, data.max(), isostep))
plt.clf()
plt.axis('off')
plt.figure(dpi=dpi)
fig = plt.figure(figsize=image_size, frameon=False)
fig.add_axes([0, 0, 1, 1])
contourf(data, 256, cmap=CMAP)
contour(data, isohypses, colors=ISOHYPSE_COLOR, linewidths=ISOHYPSE_WIDTH)
output_file_path.parent.parent.mkdir(parents=True, exist_ok=True)
plt.savefig(str(output_file_path), bbox_inches=0, dpi=dpi)
def plotSurface(pt, td, winds, map, stride, title, file_name):
pylab.figure()
pylab.axes((0.05, 0.025, 0.9, 0.9))
u, v = winds
nx, ny = pt.shape
gs_x, gs_y = goshen_3km_gs
xs, ys = np.meshgrid(gs_x * np.arange(nx), gs_y * np.arange(ny))
data_thin = tuple([ slice(None, None, stride) ] * 2)
td_cmap = matplotlib.cm.get_cmap('Greens')
td_cmap.set_under('#ffffff')
pylab.contourf(xs, ys, td, levels=np.arange(40, 80, 5), cmap=td_cmap)
pylab.colorbar()
CS = pylab.contour(xs, ys, pt, colors='r', linestyles='-', linewidths=1.5, levels=np.arange(288, 324, 4))
pylab.clabel(CS, inline_spacing=0, fmt="%d K", fontsize='x-small')
pylab.quiver(xs[data_thin], ys[data_thin], u[data_thin], v[data_thin])
drawPolitical(map, scale_len=75)
pylab.suptitle(title)
pylab.savefig(file_name)
pylab.close()
return
def main():
zbar = 0.7
vbar = 500 # km/s comoving distance
ncc = 1024
npp = 200000 # total mass = 1e9*2e5 M_sun/h
bsz = 3.0 # Mpc/h comoving distance
file_particles = sys.argv[1]
sdens = call_sph_sdens(file_particles, bsz, ncc, npp)
sdens.astype(np.float32).tofile("./output_files/cnfw_sdens.bin")
ksz_map = ksz_based_on_sdens(zbar, vbar, sdens)
# ---------------------------
# Save 2d array to a binary file.
ksz_map.astype(np.float32).tofile("./output_files/cnfw_ksz.bin")
# ---------------------------
# ---------------------------
# Read the output binary files.
a0 = np.fromfile("./output_files/cnfw_ksz.bin", dtype=np.float32)
a0 = a0.reshape((ncc, ncc))
# ---------------------------
# ---------------------------
# Plot the contours
import pylab as pl
pl.contourf(np.log10(a0))
pl.colorbar()
pl.show()
return 0
def __init__(self, name, nx, ng, np, opts={}):
Callback.__init__(self)
self.nx = nx
self.ng = ng
self.np = np
opts['input_scheme'] = nlpsol_out()
opts['output_scheme'] = ['ret']
figure(1)
subplot(111)
x_,y_ = mgrid[-1:1.5:0.01,-1:1.5:0.01]
z_ = DM.zeros(x_.shape)
for i in range(x_.shape[0]):
for j in range(x_.shape[1]):
z_[i,j] = fcn(x_[i,j],y_[i,j])
contourf(x_,y_,z_)
colorbar()
title('Iterations of Rosenbrock')
draw()
self.x_sols = []
self.y_sols = []
# Initialize internal objects
self.construct(name, opts)
def postplot(x,y,arr,plottitle,showplot=True):
""" Post process in 2D"""
levels = linspace(min(arr.ravel())*0.9,max(arr.ravel())*1.1,50)
contourf(x,y,arr.T,levels=levels);
title(plottitle); colorbar();
show()
return
def ScatterWithLinearSVC(X_,class_,C_,TrainedSVC,Labels_):
##"Train" the data, aka fit with vectorial distance to a line, since we are using a linear kernel
## Here we essentially minimize the total distance that each point is to a decision boundary
## Based on which side of the boundary the point lies (if distance is "positive" or "negative"), the decision is made
#TrainedSVC = SVC(C = C_, kernel = 'linear').fit(X_,class_)
if np.shape(X_)[1] >2:
print "X is larger than 2!"
Xvalues=X_[:,0]
Yvalues=X_[:,1]
xmax, ymax, xmin,ymin =Xvalues.max(), Yvalues.max(), Xvalues.min(), Yvalues.min()
binning=100.
### Make a big grid of coordinates, as a matrix of X positions and a matrix of y positions
X, Y = np.meshgrid(np.arange(xmin,xmax, (xmax-xmin)/binning),
np.arange(ymin,ymax, (ymax-ymin)/binning))
### Ravel the X and Y matrices up into vectors, put them together, and feed them to the predict function
GridPredictions=TrainedSVC.predict(np.c_[X.ravel(), Y.ravel()])
### Re-form a matrix of Grid predictions
GridPredictions=np.reshape(GridPredictions,np.shape(X))
### Plot a contour, with coloring each area, fading to 1/3 of the color "strength"
fig=plt.figure()
plt.contourf(X,Y,GridPredictions,alpha=0.33)
plt.scatter(Xvalues, Yvalues,c=class_)
plt.scatter(Xvalues, Yvalues,c=class_)
plt.ylabel(Labels_[0])
plt.xlabel(Labels_[1])
#plt.legend([GridPredictions], ["Training accuracy"])
fig.savefig('result.png')
def doSubplot(multiplier=1.0, layout=(-1, -1)):
exp_vort = cPickle.load(open("vort_time_height_%s.pkl" % exp[5:], 'r'))
vort_data[exp] = exp_vort
print "Max vorticity:", exp_vort.max()
cmap = cm.get_cmap('RdYlBu_r')
cmap.set_under('#ffffff')
# pylab.pcolormesh(boundCoordinate(np.array(temp.getTimes())), boundCoordinate(z_column / 1000.), exp_vort.T, cmap=cmap, vmin=min_vorticity, vmax=max_vorticity)
pylab.contourf(temp.getTimes(), z_column / 1000., exp_vort.T, cmap=cmap, levels=np.arange(min_vorticity, max_vorticity + 0.0024, 0.0025))
pylab.xlim(temp.getTimes()[0], temp.getTimes()[-1])
pylab.ylim([z_column[0] / 1000, 10])
layout_r, layout_c = layout
if layout_r == 2 and layout_c == 1 or layout_r == -1 and layout_c == -1:
pylab.xlabel("Time (UTC)", size='large')
pylab.ylabel("Height (km MSL)", size='large')
# pylab.axvline(14400, color='k', linestyle=':')
pylab.xticks(temp.getTimes(), temp.getStrings('%H%M', aslist=True), size='large')
pylab.yticks(size='large')
else:
pylab.xticks(temp.getTimes(), [ '' for t in temp ])
pylab.yticks(pylab.yticks()[0], [ '' for z in pylab.yticks()[0] ])
pylab.text(0.05, 0.95, experiments[exp], ha='left', va='top', transform=pylab.gca().transAxes, size=18 * multiplier)
pylab.xlim(temp.getTimes()[0], temp.getTimes()[3])
pylab.ylim([z_column[1] / 1000, 6])
# pylab.title(exp)
return
def plot_function_contour(x, y, function, **kwargs):
"""Make a contour plot of a function of two variables.
Parameters
----------
x, y : array_like of float
The positions of the nodes of a plotting grid.
function : function
The function to plot.
filling : bool
Fill contours if True (default).
num_contours : int
The number of contours to plot, 50 by default.
xlabel, ylabel : str, optional
The axes labels. Empty by default.
title : str, optional
The title. Empty by default.
"""
X, Y = numpy.meshgrid(x, y)
Z = []
for y_value in y:
Z.append([])
for x_value in x:
Z[-1].append(function(x_value, y_value))
Z = numpy.array(Z)
num_contours = kwargs.get('num_contours', 50)
if kwargs.get('filling', True):
pylab.contourf(X, Y, Z, num_contours, cmap=pylab.cm.jet)
else:
pylab.contour(X, Y, Z, num_contours, cmap=pylab.cm.jet)
pylab.xlabel(kwargs.get('xlabel', ''))
pylab.ylabel(kwargs.get('ylabel', ''))
pylab.title(kwargs.get('title', ''))
def plotComparison(ens_mean, ens_ob_mean, ens_ob_std, obs, ob_locations, refl, grid, levels, cmap, title, file_name):
max_std = 5.0
xs, ys = grid.getXY()
obs_xs, obs_ys = grid(*ob_locations)
clip_box = Bbox([[0, 0], [1, 1]])
pylab.figure()
pylab.contourf(xs, ys, ens_mean, cmap=cmap, levels=levels)
pylab.colorbar()
pylab.contour(xs, ys, refl, colors='k', levels=np.arange(20, 80, 20))
for ob_x, ob_y, ob, ob_mean, ob_std in zip(obs_xs, obs_ys, obs, ens_ob_mean, ens_ob_std):
color_bin = np.argmin(np.abs(ob - levels))
if ob > levels[color_bin]: color_bin += 1
color_level = float(color_bin) / len(levels)
ob_z_score = (ob - ob_mean) / ob_std
print "Ob z-score:", ob_z_score, "Ob:", ob, "Ob mean:", ob_mean, "Ob std:", ob_std
pylab.plot(ob_x, ob_y, 'ko', markerfacecolor=cmap(color_level), markeredgecolor=std_cmap(ob_z_score / max_std), markersize=4, markeredgewidth=1)
# pylab.text(ob_x - 1000, ob_y + 1000, "%5.1f" % temp_K, ha='right', va='bottom', size='xx-small', clip_box=clip_box, clip_on=True)
grid.drawPolitical()
pylab.suptitle(title)
pylab.savefig(file_name)
pylab.close()
return
def main():
buffer_width=40000
reports = loadReports("snowfall_2013022600_m.txt")
# map = Basemap(projection='lcc', resolution='i', area_thresh=10000.,
# llcrnrlat=20., llcrnrlon=-120., urcrnrlat=48., urcrnrlon=-60.,
# lat_0=34.95, lon_0=-97.0, lat_1=30., lat_2=60.)
map = Basemap(projection='lcc', resolution='i', area_thresh=10000.,
llcrnrlat=25., llcrnrlon=-110., urcrnrlat=40., urcrnrlon=-90.,
lat_0=34.95, lon_0=-97.0, lat_1=30., lat_2=60.)
width, height = map(map.urcrnrlon, map.urcrnrlat)
report_xs, report_ys = map(reports['longitude'], reports['latitude'])
keep_idxs = np.where((report_xs >= -buffer_width) & (report_xs <= width + buffer_width) & (report_ys >= -buffer_width) & (report_ys <= height + buffer_width))
spacing = findAvgStationSpacing(*map(reports['longitude'][keep_idxs], reports['latitude'][keep_idxs]))
dx = dy = floor(spacing * 0.75 / 2000) * 2000
print dx, dy
xs, ys = np.meshgrid(np.arange(0, width, dx), np.arange(0, height, dy))
grid = griddata((report_xs[keep_idxs], report_ys[keep_idxs]), reports['amount'][keep_idxs], (xs, ys))
pylab.contourf(xs, ys, grid / 2.54, levels=np.arange(2, 22, 2), cmap=pylab.cool())
pylab.colorbar(orientation='horizontal')
map.drawcoastlines()
map.drawcountries()
map.drawstates()
pylab.savefig("snow.png")
return
def doSubplot(multiplier=1.0, layout=(-1, -1)):
data = cPickle.load(open("cold_pool_%s.pkl" % exp, 'r'))
wdt = temporal.getTimes().index(time_sec)
try:
mo = ARPSModelObsFile("%s/%s/KCYSan%06d" % (base_path, exp, time_sec))
except AssertionError:
mo = ARPSModelObsFile("%s/%s/KCYSan%06d" % (base_path, exp, time_sec), mpi_config=(2, 12))
except:
print "Can't load reflectivity ..."
mo = {'Z':np.zeros((1, 255, 255), dtype=np.float32)}
cmap = matplotlib.cm.get_cmap('Blues_r')
cmap.set_over('#ffffff')
# cmap.set_under(tuple( cmap._segmentdata[c][0][-1] for c in ['red', 'green', 'blue'] ))
# cmap.set_under(cmap[0])
xs, ys = grid.getXY()
# pylab.pcolormesh(xs, ys, data['t'][2][domain_bounds], cmap=cmap, vmin=288., vmax=295.)
pylab.contour(xs, ys, mo['Z'][0][domain_bounds], levels=np.arange(10, 80, 10), colors='k', zorder=10)
pylab.contourf(xs, ys, data['t'][wdt][domain_bounds], levels=range(289, 296), cmap=cmap)
grid.drawPolitical(scale_len=10)
# pylab.plot(track_xs, track_ys, 'mv-', lw=2.5, mfc='k', ms=8)
pylab.text(0.05, 0.95, experiments[exp], ha='left', va='top', transform=pylab.gca().transAxes, size=14 * multiplier)
return
def main():
nnn = 512
boxsize = 4.0
dsx = boxsize/nnn
xi1 = np.linspace(-boxsize/2.0,boxsize/2.0-dsx,nnn)+0.5*dsx
xi2 = np.linspace(-boxsize/2.0,boxsize/2.0-dsx,nnn)+0.5*dsx
xi1,xi2 = np.meshgrid(xi1,xi2)
#----------------------------------------------------
# lens parameters for main halo
xlc1 = 0.0
xlc2 = 0.0
ql0 = 0.799999999999
rc0 = 0.100000000001
re0 = 1.0
phi0 = 0.0
g_ycen = 0.0
g_xcen = 0.0
phi,td,ai1,ai2,kappa,mu,yi1,yi2 = nie_all(xi1,xi2,xlc1,xlc2,re0,rc0,ql0,phi0,g_ycen,g_xcen)
pl.figure(figsize=(10,10))
pl.contourf(td)
pl.show()
def trainStep(fnn, trainer, trndata, tstdata):
trainer.trainEpochs(1)
trnresult = percentError(trainer.testOnClassData(), trndata["class"])
tstresult = percentError(trainer.testOnClassData(dataset=tstdata), tstdata["class"])
print "epoch: %4d" % trainer.totalepochs, " train error: %5.2f%%" % trnresult, " test error: %5.2f%%" % tstresult
out = fnn.activateOnDataset(griddata)
out = out.argmax(axis=1) # the highest output activation gives the class
out = out.reshape(X.shape)
figure(1)
ioff() # interactive graphics off
clf() # clear the plot
hold(True) # overplot on
for c in [0, 1, 2]:
here, _ = where(trndata["class"] == c)
plot(trndata["input"][here, 0], trndata["input"][here, 1], "o")
if out.max() != out.min(): # safety check against flat field
contourf(X, Y, out) # plot the contour
ion() # interactive graphics on
draw() # update the plot
figure(2)
ioff() # interactive graphics off
clf() # clear the plot
hold(True) # overplot on
for c in [0, 1, 2]:
here, _ = where(tstdata["class"] == c)
plot(tstdata["input"][here, 0], tstdata["input"][here, 1], "o")
if out.max() != out.min(): # safety check against flat field
contourf(X, Y, out) # plot the contour
ion() # interactive graphics on
draw() # update the plot
def plot(self,scatter=None,screen=True,out=None):
""" Plot the VLEP landscape. """
X = np.linspace(0.5,3.2,100)
Y = np.linspace(-2,1.4,100)
Z=np.zeros((100,100))
for i,x in enumerate(X):
for j,y in enumerate(Y):
Z[j,i]=self._function(x,y)
pl.contourf(X,Y,Z,100)
pl.hot()
if scatter!=None:
pl.scatter(scatter[0,:],scatter[1,:],color='b')
#if plot!=None:
#pl.plot(plot[0,:],plot[1,:],color='y')
#pl.scatter(plot[0,:],plot[1,:],color='y')
if screen==True:
pl.show()
else:
assert out!=None
pl.savefig(out)
pl.clf()
self.it+=1
def view_pcem(self,PCEM):
nbins = np.sqrt(len(PCEM))
levels=[0.0,0.01,0.02,0.03,0.04,0.05,0.1,0.15,0.2,0.25,0.3,0.35,0.4,0.45,0.5]
#levels2=[0.0,0.01,0.05,0.1,0.2,0.3,0.4,0.5,1.0]
T1 = PCEM[:,0].reshape( (nbins,nbins))
T2 = PCEM[:,1].reshape( (nbins,nbins))
E = PCEM[:,2].reshape( (nbins,nbins))
EC = PCEM[:,3].reshape( (nbins,nbins))
M = PCEM[:,4].reshape( (nbins,nbins))
pp.figure()
pp.subplot(1,2,1)
pp.contour( T1, T2, E, levels,linewidths=0.5,colors="k",linestyles='solid' )
pp.contourf( T1, T2, E, levels, alpha=0.75 )
pp.xlabel( "proposal")
pp.ylabel( "current")
pp.title( "Error" )
pp.colorbar()
# pp.subplot(1,3,2)
# pp.contour( T1, T2, EC, levels,linewidths=0.5,colors="k",linestyles='solid' )
# pp.contourf( T1, T2, EC, levels, alpha=0.75 )
# pp.xlabel( "proposal")
# pp.ylabel( "current")
# pp.colorbar()
# pp.title( "Corrected Error" )
pp.subplot(1,2,2)
pp.contour( T1, T2, M, 20,linewidths=1.0,colors="k",linestyles='solid' )
pp.contourf( T1, T2, M, 20 )
pp.xlabel( "proposal")
pp.ylabel( "current")
pp.colorbar()
pp.title("MU Z")
def doSubplot(multiplier=1.0, layout=(-1, -1)):
if time_sec < 16200:
xs, ys = xs_1, ys_1
domain_bounds = bounds_1sthalf
grid = grid_1
else:
xs, ys = xs_2, ys_2
domain_bounds = bounds_2ndhalf
grid = grid_2
try:
mo = ARPSModelObsFile("%s/%s/KCYS%03dan%06d" % (base_path, exp, min_ens, time_sec))
except AssertionError:
mo = ARPSModelObsFile("%s/%s/KCYS%03dan%06d" % (base_path, exp, min_ens, time_sec), mpi_config=(2, 12))
except:
print "Can't load reflectivity ..."
mo = {'Z':np.zeros((1, 255, 255), dtype=np.float32)}
pylab.contour(xs, ys, wind[exp]['w'][wdt][domain_bounds], levels=np.arange(2, 102, 2), styles='-', colors='k')
pylab.contour(xs, ys, wind[exp]['w'][wdt][domain_bounds], levels=np.arange(-100, 0, 2), styles='--', colors='k')
pylab.quiver(xs[thin], ys[thin], wind[exp]['u'][wdt][domain_bounds][thin], wind[exp]['v'][wdt][domain_bounds][thin])
pylab.contourf(xs, ys, mo['Z'][0][domain_bounds], levels=np.arange(10, 85, 5), cmap=NWSRef, zorder=-10)
grid.drawPolitical(scale_len=10)
row, col = layout
if col == 1:
pylab.text(-0.075, 0.5, exp_names[exp], transform=pylab.gca().transAxes, rotation=90, ha='center', va='center', size=12 * multiplier)
def makemap( name,
bamfile,
window,
stride,
highest,
lowest,
bins ) :
"""
This function drives the genome map making workflow.
"""
import pylab
logfile = name + '.mapmaker.log'
mapfile = name + '.map.gff'
pique.msg( logfile, 'starting mapmaker for project : ' + name )
pique.msg( logfile, ' -> BAM file : ' + bamfile )
pique.msg( logfile, ' -> map file : ' + mapfile )
pique.msg( logfile, ' -> window : ' + str(window) )
pique.msg( logfile, ' -> stride : ' + str(stride) )
pique.msg( logfile, ' -> bins : ' + str(bins) )
pique.msg( logfile, ' -> highest bin : ' + str(highest) )
pique.msg( logfile, ' -> lowest bin : ' + str(lowest) )
pique.msg( logfile, 'loading data...' )
data = pique.fileIO.loadBAM( bamfile )
pique.msg( logfile, ' found contigs :' )
for contig in data.keys() :
pique.msg( logfile, ' ' + contig )
pique.msg( logfile, ' ' + str(len(data[contig]['forward'])) )
pique.msg( logfile, 'making spectral histograms...' )
sh = {}
for contig in data.keys() :
pique.msg( logfile, ' :: making sectral histogram for contig ' + contig )
d = numpy.array( data[contig]['forward'] + data[contig]['reverse'], dtype = int )
sh[contig] = pique.mapmaker.hist( d,
lowest,
highest,
bins,
window,
stride )
# save images of spectral histograms
pique.msg( logfile, 'saving images of spectral histograms...' )
for contig in sh.keys() :
pylab.cla() # clean up crumbs from last plot
pylab.clf() # clean up crumbs from last plot
pique.msg( logfile, ' :: saving image for contig ' + contig )
pylab.contourf( sh[contig], bins )
pylab.title( name + ' : ' + contig )
imgname = name + '_' + contig + '.png'
pylab.savefig( imgname, format='png' )
def main():
base_path = "/caps2/tsupinie/"
ap = argparse.ArgumentParser()
ap.add_argument('--exp-name', dest='exp_name', required=True)
args = ap.parse_args()
n_ens_members = 40
exp_name = args.exp_name
bounds_obs = (slice(100, 180), slice(90, 170))
grid_obs = goshen_1km_grid(bounds=bounds_obs)
bounds = (slice(None), slice(None))
grid = goshen_1km_grid(bounds=bounds)
temp = goshen_1km_temporal(start=14400)
obs_file_names = ['psu_straka_mesonet.pkl', 'ttu_sticknet.pkl', 'asos.pkl']
all_obs = loadObs(obs_file_names, temp.getDatetimes(aslist=True), grid_obs, grid_obs.getWidthHeight())
obs_xy = np.vstack(grid(all_obs['longitude'], all_obs['latitude'])).T
ens = loadEnsemble("/caps2/tsupinie/%s/" % exp_name, n_ens_members, temp.getTimes(), (['u', 'v', 'pt', 'p', 'qv'], getTempDewpRefl), {'sigma':2}, agl=True, wrap=True)
grid_xs, grid_ys = grid.getXY()
obs_t_verif = []
for wdt, (time_sec, time_epoch) in enumerate(zip(temp, temp.getEpochs())):
try:
mo = ARPSModelObsFile("%s/%s/KCYSan%06d" % (base_path, exp_name, time_sec))
except AssertionError:
mo = ARPSModelObsFile("%s/%s/KCYSan%06d" % (base_path, exp_name, time_sec), mpi_config=(2, 12))
except:
print "Can't load reflectivity ..."
mo = {'Z':np.zeros((1, 255, 255), dtype=np.float32)}
time_ob_idxs = np.where(all_obs['nom_time'] == time_epoch)[0]
time_obs = all_obs[time_ob_idxs]
time_obs_xy = obs_xy[time_ob_idxs]
obs_intrp = griddata(time_obs_xy, 5. / 9. * (time_obs['temp'] - 32) + 273.15, (grid_xs, grid_ys))
print np.isfinite(obs_intrp).sum()
pylab.figure()
pylab.contourf(grid_xs, grid_ys, ens['t'][:, wdt].mean(axis=0)[bounds] - obs_intrp, levels=np.arange(-6, 6.5, 0.5), cmap=matplotlib.cm.get_cmap("RdBu_r"))
pylab.colorbar()
pylab.contour(grid_xs, grid_ys, mo['Z'][0][tuple(reversed(bounds))], levels=np.arange(10, 80, 10), colors='k')
grid.drawPolitical()
pylab.savefig("obs_verif/obs_%s_t_grid_%06d.png" % (exp_name[5:], time_sec))
pylab.close()
obs_t_verif.append(ens['t'][:, wdt].mean(axis=0) - obs_intrp)
cPickle.dump(np.array(obs_t_verif), open("obs_verif/obs_verif_%s.pkl" % exp_name, 'w'), -1)
return
def plot_options(K_vals, sigma_vals, prices):
"""Make a contour plot of the option prices."""
import pylab
pylab.contourf(sigma_vals, K_vals, prices)
pylab.colorbar()
pylab.title("Option Price")
pylab.xlabel("Volatility")
pylab.ylabel("Strike Price")
def ContourPlot2D(u, v, p, Y, X):
pl.figure(figsize = (11,7), dpi = 100)
pl.contourf(X,Y,p,alpha=0.5,cmap=cm.gist_heat)# plotting the pressure field contours
pl.colorbar()
pl.quiver(X[::2,::2],Y[::2,::2],u[::2,::2],v[::2,::2]) # plotting velocity vectors
pl.xlabel('X')
pl.ylabel('Y')
pl.title('Pressure contours and velocity vectors')
def plot(H, w1, w2):
eva, eve = eigh(H)
Y, X = np.meshgrid(w2, w1)
plt.contourf(X, Y, np.log(eva), 50)
plt.colorbar()
plt.xlabel(r"$\omega_1$")
plt.ylabel(r"$\omega_2$")
plt.title("greatest eigenvalue of second derivatives (log scale)")
def graphs_parameters_svm(filename):
#reading the features and target variables from the file
features, target = read_data(filename)
# to normalize the data by subtracting mean and dividing by standard deviation
scaler = StandardScaler()
features = scaler.fit_transform(features)
#setting the ranges of gamma and C
C_2d_range = [1, 1e2, 1e4, 1e5]
gamma_2d_range = [1e-1, 1, 1e1, 1e2]
#classifiers will contain list of all the models for various ranges of C and gamma
classifiers = []
for C in C_2d_range:
for gamma in gamma_2d_range:
clf = SVC(kernel='rbf', C=C, gamma=gamma)
clf.fit(features, target)
classifiers.append((C, gamma, clf))
target = [int(y) for y in target]
pl.figure(figsize=(12, 10))
# construct a mesh
h = .02
x = np.array(features, dtype=float)
y = np.array(target, dtype= int)
x_min, x_max = x[:, 0].min() - 1, x[:, 0].max() + 1
y_min, y_max = x[:, 1].min() - 1, x[:, 1].max() + 1
xx, yy = np.meshgrid(np.arange(x_min, x_max, h), np.arange(y_min, y_max, h))
#Plotting Support vectors
for (k, (C, gamma, clf)) in enumerate(classifiers):
Z = clf.predict(np.c_[xx.ravel(), yy.ravel()])
Z = Z.reshape(xx.shape)
pl.subplot(len(C_2d_range), len(gamma_2d_range), k + 1)
pl.title("gamma 10^%d, C 10^%d" % (np.log10(gamma), np.log10(C)),size='medium')
pl.contourf(xx, yy, Z, cmap=pl.cm.Paired)
pl.scatter(clf.support_vectors_[:, 0],clf.support_vectors_[:, 1], c=y[clf.support_], cmap=pl.cm.Paired)
pl.xticks(())
pl.yticks(())
pl.axis('tight')
pl.show()
pl.figure(figsize=(12, 10))
#plotting decision boundary
for (k, (C, gamma, clf)) in enumerate(classifiers):
# evaluate decision function in a grid
Z = clf.decision_function(np.c_[xx.ravel(), yy.ravel()])
Z = Z.reshape(xx.shape)
# visualize decision function for these parameters
pl.subplot(len(C_2d_range), len(gamma_2d_range), k + 1)
pl.title("gamma 10^%d, C 10^%d" % (np.log10(gamma), np.log10(C)),
size='medium')
# visualize parameter's effect on decision function
pl.pcolormesh(xx, yy, -Z, cmap=pl.cm.jet)
pl.scatter(features[:, 0], features[:, 1], c=target, cmap=pl.cm.jet)
pl.xticks(())
pl.yticks(())
pl.axis('tight')
pl.show()
optimal_model = grid_search(clf, x, y)
print " the optimal parameters are (C gamma):(", optimal_model.C,optimal_model._gamma, ")"
def plot_contour(Z, fname, title):
xm, tm = np.meshgrid(x, time)
pl.contourf(xm, tm, Z,100)
pl.title(title, fontsize=20)
pl.colorbar()
pl.xlabel('x')
pl.ylabel('t [sec]')
pl.savefig(fname+'.png')
pl.clf()
def show_cmap(cmap, levs):
n = 10
x = np.linspace(0,n,n)
y = np.linspace(0,n,n)
z = levs.min() + np.random.random((n,n)) * (levs.max() - levs.min())
pl.figure()
pl.contourf(x,y,z,levs,extend='both',cmap=cmap)
pl.colorbar()
def plotSpread(spread, title, file_name):
pylab.clf()
ny, nx = spread.shape
x, y = np.meshgrid(np.arange(nx), np.arange(ny))
pylab.contourf(x, y, spread)
pylab.colorbar()
pylab.title(title)
pylab.savefig(file_name)
return
def TimeIntegrate():
global Nx, Nz, hx, hz, x, z, dt
global U, W, P, T
global Hx, Hz, Pp, Ht
time = 0
fwTime = 0.0
iCnt = 1
Hx.fill(0.0)
Hz.fill(0.0)
Ht.fill(0.0)
while True:
if iCnt % opInt == 0:
Re = np.mean(np.sqrt(U[1:Nx-1, 1:Nz-1]**2.0 + W[1:Nx-1, 1:Nz-1]**2.0))/nu
Nu = 1.0 + np.mean(W[1:Nx-1, 1:Nz-1]*T[1:Nx-1, 1:Nz-1])/kappa
maxDiv = getDiv(U, W)
print("%f %f %f %f" %(time, Re, Nu, maxDiv))
Hx = computeNLinDiff_X(U, W)
Hz = computeNLinDiff_Z(U, W)
Ht = computeNLinDiff_T(U, W, T)
# Calculating guessed values of U implicitly
Hx[1:Nx-1, 1:Nz-1] = U[1:Nx-1, 1:Nz-1] + dt*(Hx[1:Nx-1, 1:Nz-1] - (P[2:Nx, 1:Nz-1] - P[0:Nx-2, 1:Nz-1])/(2.0*hx))
uJacobi(Hx)
# Calculating guessed values of W implicitly
Hz[1:Nx-1, 1:Nz-1] = W[1:Nx-1, 1:Nz-1] + dt*(Hz[1:Nx-1, 1:Nz-1] - ((P[1:Nx-1, 2:Nz] - P[1:Nx-1, 0:Nz-2])/(2.0*hz)) + T[1:Nx-1, 1:Nz-1])
wJacobi(Hz)
# Calculating guessed values of T implicitly
Ht[1:Nx-1, 1:Nz-1] = T[1:Nx-1, 1:Nz-1] + dt*Ht[1:Nx-1, 1:Nz-1]
TJacobi(Ht)
#print(np.amax(U), np.amax(V), np.amax(W))
# Calculating pressure correction term
rhs = np.zeros([Nx, Nz])
rhs[1:Nx-1, 1:Nz-1] = ((U[2:Nx, 1:Nz-1] - U[0:Nx-2, 1:Nz-1])/(2.0*hx) +
(W[1:Nx-1, 2:Nz] - W[1:Nx-1, 0:Nz-2])/(2.0*hz))/dt
#ps.multigrid(Pp, rhs)
Pp = PoissonSolver(rhs)
# Add pressure correction.
P = P + Pp
# Update new values for U, V and W
U[1:Nx-1, 1:Nz-1] = U[1:Nx-1, 1:Nz-1] - dt*(Pp[2:Nx, 1:Nz-1] - Pp[0:Nx-2, 1:Nz-1])/(2.0*hx)
W[1:Nx-1, 1:Nz-1] = W[1:Nx-1, 1:Nz-1] - dt*(Pp[1:Nx-1, 2:Nz] - Pp[1:Nx-1, 0:Nz-2])/(2.0*hz)
imposeUBCs(U)
imposeWBCs(W)
imposePBCs(P)
imposeTBCs(T)
#print(np.amax(U), np.amax(W))
#if abs(fwTime - time) < 0.5*dt:
if abs(time - tMax)<1e-5:
writeSoln(U, W, P, T, time)
Z, X = np.meshgrid(x,z)
plt.contourf(X, Z, T, 500, cmap=cm.coolwarm)
clb = plt.colorbar()
plt.quiver(X, Z, U, W)
plt.axis('scaled')
clb.ax.set_title(r'$T$', fontsize = 20)
plt.show()
fwTime = fwTime + fwInt
if time > tMax:
break
time = time + dt
iCnt = iCnt + 1
def plot_PDF_log(data, x_, y_, z_, ZZ, var_name1, var_name2, var_name3, amp_qt,
amp_w, time, z):
fig = plt.figure(figsize=(20, 15))
plt.subplot(3, 5, 1)
plt.scatter(data[:, 0], data[:, 1], s=2, alpha=0.3)
plt.title('data')
axis_label(var_name1, var_name2, amp_qt, amp_w)
plt.subplot(3, 5, 2)
ax1 = plt.hist2d(data[:, 0],
data[:, 1],
bins=30,
norm=LogNorm(),
normed=True)
plt.colorbar(shrink=0.8)
axis_label(var_name1, var_name2, amp_qt, amp_w)
plt.title('data histogram')
plt.subplot(3, 5, 3)
ax1 = plt.contourf(x_, y_, np.sum(np.exp(ZZ), axis=2).T, norm=LogNorm())
plt.colorbar(ax1, shrink=0.8)
plt.title('EM2 PDF')
axis_label(var_name1, var_name2, amp_qt, amp_w)
plt.subplot(3, 5, 4)
ax1 = plt.hist2d(data[:, 0],
data[:, 1],
bins=30,
normed=True,
norm=LogNorm())
# xxx
lvls = np.logspace(-1, 6, 10)
ax2 = plt.contour(x_,
y_,
np.sum(np.exp(ZZ), axis=2).T,
levels=lvls,
colors='w',
norm=LogNorm(),
linewidths=3)
plt.colorbar(ax2, shrink=0.8)
# xxx
plt.title('EM2 PDF')
axis_label(var_name1, var_name2, amp_qt, amp_w)
plt.subplot(3, 5, 6)
plt.scatter(data[:, 0], data[:, 2], s=2, alpha=0.3)
plt.title('data')
axis_label(var_name1, var_name3, amp_qt, amp_w)
plt.subplot(3, 5, 7)
ax1 = plt.hist2d(data[:, 0],
data[:, 2],
bins=30,
norm=LogNorm(),
normed=True)
plt.colorbar(shrink=0.8)
axis_label(var_name1, var_name3, amp_qt, amp_w)
plt.title('data histogram')
plt.subplot(3, 5, 8)
# xxx
ax1 = plt.contourf(x_, z_, np.sum(np.exp(ZZ), axis=1).T, norm=LogNorm())
# xxx
plt.colorbar(ax1, shrink=0.8)
plt.title('EM2 PDF')
axis_label(var_name1, var_name3, amp_qt, amp_w)
plt.subplot(3, 5, 9)
ax1 = plt.hist2d(data[:, 0],
data[:, 2],
bins=30,
normed=True,
norm=LogNorm())
# xxx
# lvls = np.exp(np.arange(-5,6,1))
lvls = np.logspace(-1, 5, 10)
ax2 = plt.contour(x_,
z_,
np.sum(np.exp(ZZ), axis=1).T,
levels=lvls,
colors='w',
norm=LogNorm(),
linewidths=3)
plt.colorbar(ax2, shrink=0.8)
# xxx
plt.title('EM2 PDF')
axis_label(var_name1, var_name3, amp_qt, amp_w)
plt.subplot(3, 5, 11)
plt.scatter(data[:, 1], data[:, 2], s=2, alpha=0.3)
plt.title('data')
axis_label(var_name2, var_name3, amp_qt, amp_w)
plt.subplot(3, 5, 12)
ax1 = plt.hist2d(data[:, 1],
data[:, 2],
bins=30,
norm=LogNorm(),
normed=True)
plt.colorbar(shrink=0.8)
plt.title('data histogram')
plt.subplot(3, 5, 13)
# xxx
ax1 = plt.contourf(y_, z_, np.sum(np.exp(ZZ), axis=0).T, norm=LogNorm())
# xxx
plt.title('EM2 PDF')
axis_label(var_name2, var_name3, amp_qt, amp_w)
plt.colorbar(ax1, shrink=0.8)
plt.subplot(3, 5, 14)
ax1 = plt.hist2d(data[:, 1],
data[:, 2],
bins=30,
normed=True,
norm=LogNorm())
# xxx
lvls = np.logspace(-1, 6, 10)
ax2 = plt.contour(y_,
z_,
np.sum(np.exp(ZZ), axis=0).T,
levels=lvls,
colors='w',
linewidths=3,
norm=LogNorm())
plt.colorbar(ax2, shrink=0.8)
# xxx
plt.title('EM2 PDF')
axis_label(var_name2, var_name3, amp_qt, amp_w)
# plt.colorbar(ax1, shrink=0.8)
fig.suptitle('EM2 PDF: ' + var_name1 + var_name2 + var_name3 + ' (t=' +
str(time) + ', z=' + str(z) + 'm)',
fontsize=20)
plt.savefig(
os.path.join(
path, 'EM2_trivar_figures',
'EM2_PDF_trivariate_' + var_name1 + var_name2 + var_name3 + '_' +
str(time) + '_z' + str(np.int(z)) + 'm_log.png'))
plt.close()
return
X = mData[:, :, 0] * 1.475
Y = mData[:, :, 1] * 1.475
elif str(sys.argv[3]) == "yz":
X = mData[:, :, 1] * 1.475
Y = mData[:, :, 2] * 1.475
else:
print("only xz and xy slices supported")
exit
F = mData[:, :, 3] * Fscale
fig, axes = plt.subplots(nrows=1, ncols=1)
fig.set_size_inches((12, 12))
sp = subplot(111)
if useLog == 1:
im2 = contourf(X, Y, log10(F + F0), colouraxis, cmap=cmapname)
else:
im2 = contourf(X, Y, F + F0, colouraxis, cmap=cmapname)
plt.xlabel("$X [km]$", fontsize=36, color=bgcolor)
plt.ylabel("$Y [km]$", fontsize=36, color=bgcolor)
dt = NextTime * 0.00496
titlestring = "t - $t_{\\rm merge}$ = %.02f ms" % (dt)
plt.title(titlestring, fontsize=36, color=bgcolor)
ax = plt.gca()
ax.xaxis.set_major_locator(majorLocatorX)
ax.xaxis.set_minor_locator(minorLocatorX)
ax.xaxis.set_ticklabels(Xlab, fontsize=32, color=bgcolor)
ax.xaxis.set_tick_params(which='minor', length=5, width=2)
ax.xaxis.set_tick_params(which='major', width=3, length=10)
#Pseudo density
nt, atoms = read_cube('water_pseudo_density.cube', read_data=True)
x = len(nt) // 2
nt = nt[x]
# All electron density and bader volumes
n, atoms = read_cube('water_density.cube', read_data=True)
#bader, atoms2 = read_cube('AtIndex.cube', read_data=True)
x = len(n) // 2
n = n[x]
#bader = bader[x]
# plot
fig = pl.figure(figsize=(6.2, 3))
pl.subplot(121)
pl.contourf(nt.T, vals, origin='lower', extend='neither', colors=colors)
pl.axis('equal')
pl.axis([52-25, 52+25, 52-25, 52+25])
pl.axis('off')
pl.text(52.5, 55, '$7.07e$', size=20, ha='center', va='center')
pl.title('Pseudo density', size=20)
pl.subplot(122)
pl.contourf(n.T, vals, colors=colors,
origin='lower', extend='neither')
#pl.contour(bader.T, [1.5], origin='lower', extend='neither', colors='k')
pl.axis('equal')
pl.axis([104-50, 104+50, 104-50, 104+50])
pl.axis('off')
pl.text(104.0, 112.0, '$9.12e$', size=20, ha='center', va='center')
pl.text( 86.5, 97.5, '$0.44e$', size=20, ha='right', va='center')
def plot_sim_reflect():
print(" SIM REFLECTIVITY")
# Set Figure Size (1000 x 800)
pylab.figure(figsize=(width,height),frameon=False)
QR = nc.variables['QRAIN']
QS = nc.variables['QSNOW']
# Define 'constant' densities (kg m-3)
rhor = 1000
rhos = 100
rhog = 400
rhoi = 917
# Define "fixed intercepts" (m-4)
Norain = 8.0E6
#Nosnow = 2.0E7
Nosnow = 2.0E6*np.exp(-0.12 * (temps[time]-273))
Nograu = 4.0E6
# First, find the density at the first sigma level
# above the surface
density = np.divide(psfc[time],(287.0 * temps[time]))
#print "Rho: ", np.mean(density)
Qra = QR[time,1]
Qsn = QS[time,1]
Qra = np.nan_to_num(Qra)
Qsn = np.nan_to_num(Qsn)
# Calculate slope factor lambda
lambr = np.divide((3.14159 * Norain * rhor), np.multiply(density, Qra))
lambr = lambr ** 0.25
#lambs = np.divide((3.14159 * Nosnow * rhoi), np.multiply(density, Qsn))
#lambs = lambs ** 0.25
lambs = np.exp(-0.0536 * (temps[time] - 273))
# Calculate equivalent reflectivity factor
Zer = (720.0 * Norain * (lambr ** -7.0)) * 1E18
Zes = (0.224 * 720.0 * Nosnow * (lambr ** -7.0) * (rhos/rhoi) ** 2) * 1E18
Zes_int = np.divide((lambs * Qsn * density), Nosnow)
Zes = ((0.224 * 720 * 1E18) / (3.14159 * rhor) ** 2) * Zes_int ** 2
Ze = np.add(Zer, Zes)
#Ze = Zer
# Convert to dBZ
dBZ = 10 * np.log10(Ze)
dBZ = np.nan_to_num(dBZ)
units = 'dBZe'
print " MAX: ", np.max(dBZ)
# Now plot
REF_LEVELS = range(5,90,5)
SREFLECT=pylab.contourf(x,y,dBZ,REF_LEVELS,cmap=coltbls.reflect())
#SREFLECT=pylab.contourf(x,y,dBZ)
title = 'Simulated Surface Reflectivity'
prodid = 'sref'
drawmap(SREFLECT, title, prodid, units)
tstresult = percentError(trainer.testOnClassData(
dataset=tstdata), tstdata['class'])
print "epoch: %4d" % trainer.totalepochs, \
" train error: %5.2f%%" % trnresult, \
" test error: %5.2f%%" % tstresult
""" Run our grid data through the FNN, get the most likely class
and shape it into a square array again. """
out = fnn.activateOnDataset(griddata)
out = out.argmax(axis=1) # the highest output activation gives the class
out = out.reshape(X.shape)
""" Now plot the test data and the underlying grid as a filled contour. """
figure(1)
ioff() # interactive graphics off
clf() # clear the plot
hold(True) # overplot on
for c in [0, 1, 2]:
here, _ = where(tstdata['class'] == c)
plot(tstdata['input'][here, 0], tstdata['input'][here, 1], 'o')
if out.max() != out.min(): # safety check against flat field
contourf(X, Y, out) # plot the contour
ion() # interactive graphics on
draw() # update the plot
""" Finally, keep showing the plot until user kills it. """
ioff()
show()
# title for the plots
titles = [
'SVC with rbf kernel',
'SVC (linear kernel)\n with Fourier rbf feature map\n'
'n_components=100', 'SVC (linear kernel)\n with Nystroem rbf feature map\n'
'n_components=100'
]
pl.tight_layout()
pl.figure(figsize=(12, 5))
# predict and plot
for i, clf in enumerate((kernel_svm, nystroem_approx_svm, fourier_approx_svm)):
# Plot the decision boundary. For that, we will asign a color to each
# point in the mesh [x_min, m_max]x[y_min, y_max].
pl.subplot(1, 3, i + 1)
Z = clf.predict(flat_grid)
# Put the result into a color plot
Z = Z.reshape(grid.shape[:-1])
pl.contourf(multiples, multiples, Z, cmap=pl.cm.Paired)
pl.axis('off')
# Plot also the training points
pl.scatter(X[:, 0], X[:, 1], c=targets_train, cmap=pl.cm.Paired)
pl.title(titles[i])
pl.tight_layout()
pl.show()
def plotMixtureEntropy(mix, axis):
"""
@param axis: matlab-like axis coordinates: [x_start, x_end, y_start, y_end]
"""
# -5, 10.0, -5.0, 10.0
x = pylab.arange(axis[0], axis[1] + 0.1, 0.1)
y = pylab.arange(axis[2], axis[3] + 0.1, 0.1)
#print x
#print y
#print len(x)
#print len(y)
#X,Y = pylab.meshgrid(x,y)
#z = pylab.exp(-(X*X + Y*Y)) + 0.6*pylab.exp(-((X+1.8)**2 + Y**2))
#pylab.contour(x,y,z)
z = numpy.zeros((len(y), len(x)), dtype='Float64')
for i in range(len(y)):
dat = numpy.zeros((len(x), 2), dtype='Float64')
dat[:, 1] = y[i]
dat[:, 0] = x
#print numpy.exp(mix.pdf(dat))
#print "---------------------------\n",dat
data = mixture.DataSet()
data.fromList(dat)
data.internalInit(mix)
l = mixture.get_posterior(mix, data, logreturn=False)
#print l
#print numpy.exp(mix.pdf(dat)).tolist()
for j in range(len(x)):
z[i, j] = mixture.entropy(l[:, j])
#print dat[j,:] ,":",l[:,j], "=",z[i,j]
#print "---------------------------\n"
#print "z", len(z),'x', len(z[0]) ,'=', len(z) * len(z[0])
print "max", z.max()
#max_val = z.max()
max_val = numpy.log(mix.G) # maximum entropy for a vector of length mix.G
print "theor. max", max_val
step = max_val / 10.0
print "step", step
#pylab.figure(1)
#pylab.contour(x,y,z)
#pylab.figure(2)
#pylab.contour(x,y,z,pylab.arange(0,max_val,step))
#pylab.legend()
# pylab.colorbar()
pylab.contourf(
x,
y,
z,
) # pylab.arange(0,max_val,step)
pylab.title('Posterior Entropy Plot')
def plotNormalMixtureDensity(mix,
axis,
title=None,
newfigure=False,
fill=True,
alpha=1.0):
"""
@param axis: matlab-like axis coordinates: [x_start, x_end, y_start, y_end]
"""
if newfigure == True:
pylab.figure()
# -5, 10.0, -5.0, 10.0
x = pylab.arange(axis[0], axis[1] + 0.1, 0.1)
y = pylab.arange(axis[2], axis[3] + 0.1, 0.1)
#print len(x)
#print len(y)
#X,Y = pylab.meshgrid(x,y)
#z = pylab.exp(-(X*X + Y*Y)) + 0.6*pylab.exp(-((X+1.8)**2 + Y**2))
#pylab.contour(x,y,z)
z = numpy.zeros((len(y), len(x)), dtype='Float64')
for i in range(len(y)):
ndat = numpy.zeros((len(x), 2), dtype='Float64')
ndat[:, 1] = y[i]
ndat[:, 0] = x
#print numpy.exp(mix.pdf(dat))
dat = mixture.DataSet()
dat.fromList(ndat)
dat.internalInit(mix)
# XXX pdf is log valued, we want the true value XXX
#print numpy.exp(mix.pdf(dat)).tolist()
z[i, :] = numpy.exp(mix.pdf(dat))
#print "z", len(z),'x', len(z[0]) ,'=', len(z) * len(z[0])
#print "max",z.max()
max_val = z.max()
step = max_val / 40.0
#step = max_val / 200.0
#print "step",step
#pylab.figure(1)
#pylab.contour(x,y,z)
if fill == True:
pylab.contourf(x, y, z, pylab.arange(0, max_val, step), alpha=alpha)
else:
pylab.contour(x, y, z, pylab.arange(0, max_val, step), alpha=alpha)
if title:
pylab.title(title)
else:
pylab.title('Normal Mixture Density Plot')
print re0, le, ql, ph, ex_shs, ex_sha
yi1 = x1 - al1
yi2 = x2 - al2
xroot1, xroot2, nroots = trf.mapping_triangles(ys1, ys2, x1, x2, yi1, yi2)
if (nroots > len(ximgs[np.nonzero(ximgs)])):
xroot = np.sqrt(xroot1 * xroot1 + xroot2 * xroot2)
idx = xroot == xroot.min()
xroot1[idx] = 0.0
xroot2[idx] = 0.0
simg = gauss_2d(x1, x2, ys1, ys2, 0.05)
limg = gauss_2d(yi1, yi2, ys1, ys2, 0.05)
levels_kappa = [0.8, 0.9, 1.0, 1.2, 1.3, 1.4, 1.5, 1.6, 1.7, 1.8, 2.8]
levels = [0.45, 0.6, 0.75, 0.9, 1.0]
pl.figure(figsize=(8, 8))
pl.contourf(x1, x2, limg, levels)
pl.contour(x1, x2, np.log(kap), levels_kappa, colors=('k', ))
pl.contour(x1, x2, simg, levels)
pl.plot(ys1, ys2, 'rx')
pl.plot(ximgs[np.nonzero(ximgs)], yimgs[np.nonzero(yimgs)], 'bo')
pl.plot(xroot1[np.nonzero(xroot1)], xroot2[np.nonzero(xroot2)], 'rx')
#---------------------------------------------
pl.show()
def make_contour(r, var, model, vel, par, mode, x):
global new_r, new_zp
import seaborn as sns
sns.set(style="white",
rc={
"figure.figsize": (8, 8),
'axes.labelsize': 16,
'ytick.labelsize': 12,
'xtick.labelsize': 12,
'axes.titlesize': 18
})
t_var = np.empty(var[x::, :].shape)
t_r = np.empty(t_var.shape)
for i in range(len(r[0, :])):
t_var[:, i] = var[x::, i]
t_r[:, i] = np.linspace(r[0, i], r[-1, i], len(t_var[:, i]))
var = 1. * t_var
r = 1. * t_r
new_r = lint.leg_interp(r[0:-2, :], 8, "EVEN")
new_zp = lint.leg_interp(var[0:-2, :], 8, "EVEN")
#levels = np.linspace(np.min(new_zp),np.max(new_zp), 40)
#####REMOVE 0-10deg at the pole:
new_r = new_r[:, 11::]
new_zp = new_zp[:, 11::]
theta = np.linspace(0, np.deg2rad(90), 89)
#########################################
#theta = np.linspace(0,np.deg2rad(90),100)
newt, n_r = np.meshgrid(theta, new_r[:, 0])
plt.contourf((new_r * np.sin(newt)), (new_r * np.cos(newt)),
new_zp,
100,
cmap=plt.cm.gnuplot,
vmax=np.max(new_zp),
vmin=np.min(new_zp))
plt.contourf((new_r * np.sin(newt)),
-(new_r * np.cos(newt)),
new_zp,
100,
cmap=plt.cm.gnuplot,
vmax=np.max(new_zp),
vmin=np.min(new_zp))
plt.contourf(-(new_r * np.sin(newt)),
-(new_r * np.cos(newt)),
new_zp,
100,
cmap=plt.cm.gnuplot,
vmax=np.max(new_zp),
vmin=np.min(new_zp))
plt.contourf(-(new_r * np.sin(newt)), (new_r * np.cos(newt)),
new_zp,
100,
cmap=plt.cm.gnuplot,
vmax=np.max(new_zp),
vmin=np.min(new_zp))
#CSl = plt.contour((new_r*np.sin(newt)),(new_r*np.cos(newt)),new_zp, 20, colors="k")
#CS = plt.contourf((new_r*np.cos(newt)), (new_r*np.sin(newt)), new_zp, cmap=plt.cm.Spectral,levels=levels)
#plt.axes().set_aspect('equal')
#plt.xlim(np.ceil(r[-1,-1]))
plt.ylim(-plt.xlim()[1], plt.xlim()[1])
#plt.xlabel("Radius [R$_{\odot}$]")
#plt.ylabel("Radius [R$_{\odot}$]")
plt.axis('off')
try:
m = (find_name(model, vel, par, mode)).strip()
except:
m = "freq_%.5f" % find_sigma(model, vel, par, mode)
v = find_vel(model, vel)
plt.title("M" + model[0] + "_V" + v + " - mode: " + m)
return
griddata._convertToOneOfMany()
for i in range(20):
trainer.trainEpochs(1) # usually 5
trainresult = percentError(trainer.testOnClassData(), traindata["class"])
testresult = percentError(trainer.testOnClassData(), testdata["class"])
print("epoch %4d" % trainer.totalepochs, "trainerror %5.2f%%" % trainresult, "testerror %5.2f%%" % testresult)
out = fnn.activateOnDataset(griddata)
out = out.argmax(axis=1)
out = out.reshape(X.shape)
figure(1)
# might be the wrong import for the following lines
ioff()
clf()
hold(True)
for c in [0,1,2]:
here, _ = where(testdata["class"]==c)
plot(testdata["input"][here, 0], testdata["input"][here, 1], 'o')
if out.max()!=out.min():
contourf(X, Y, out)
ion()
draw()
ioff()
show()
def pair_posterior(atpy_table, weights, outfile=None, title=None, priors=None, sim_vals=None):
"""
pair_posterior(atpy_table)
:Arguments:
atpy_table: Contains 1 column for each parameter with samples.
weights: The weights from the MultiNest results. Should have been
removed from the table.
outfile: The root name of the output file.
title:
priors: A dictionary of priors??
sim_vals: A dictionary containing the input values.
Produces a matrix of plots. On the diagonals are the marginal
posteriors of the parameters. On the off-diagonals are the
marginal pairwise posteriors of the parameters.
"""
params = atpy_table.keys()
pcnt = len(params)
fontsize = 6
plt.close(10)
plt.figure(10, figsize = (40,40))
plt.subplots_adjust(left=0.05, right=0.98, bottom=0.05, top=0.98)
# Marginalized 1D
for ii in range(pcnt):
ax = plt.subplot(pcnt, pcnt, ii*(pcnt+1)+1)
plt.setp(ax.get_xticklabels(), fontsize=fontsize)
plt.setp(ax.get_yticklabels(), fontsize=fontsize)
n, bins, patch = plt.hist(atpy_table[params[ii]], normed=True,
histtype='step', weights=weights, bins=50)
plt.xlabel(params[ii], size=fontsize)
plt.ylim(0, n.max()*1.1)
if (sim_vals != None) and (params[ii] in sim_vals):
plt.axvline(sim_vals[params[ii]], color='red', linestyle='-')
ax.get_xaxis().get_major_formatter().set_useOffset(False)
ax.get_xaxis().get_major_formatter().set_scientific(False)
x_limits = ax.get_xlim()
y_limits = ax.get_ylim()
x_sep = (x_limits[1] - x_limits[0]) / 2.1
y_sep = (y_limits[1] - y_limits[0]) / 2.1
x_majorLocator = MultipleLocator(x_sep)
y_majorLocator = MultipleLocator(y_sep)
ax.xaxis.set_major_locator(x_majorLocator)
ax.yaxis.set_major_locator(y_majorLocator)
# Bivariates
for ii in range(pcnt - 1):
for jj in range(ii+1, pcnt):
ax = plt.subplot(pcnt, pcnt, ii*pcnt + jj+1)
plt.setp(ax.get_xticklabels(), fontsize=fontsize)
plt.setp(ax.get_yticklabels(), fontsize=fontsize)
(H, x, y) = np.histogram2d(atpy_table[params[jj]], atpy_table[params[ii]],
weights=weights, bins=50)
xcenter = x[:-1] + (np.diff(x) / 2.0)
ycenter = y[:-1] + (np.diff(y) / 2.0)
plt.contourf(xcenter, ycenter, H.T, cmap=plt.cm.gist_yarg)
if (sim_vals != None) and (params[ii] in sim_vals) and (params[jj] in sim_vals):
plt.plot(sim_vals[params[jj]], sim_vals[params[ii]], 'r.')
plt.xlabel(params[jj], size=fontsize)
plt.ylabel(params[ii], size=fontsize)
ax.get_xaxis().get_major_formatter().set_useOffset(False)
ax.get_xaxis().get_major_formatter().set_scientific(False)
ax.get_yaxis().get_major_formatter().set_useOffset(False)
ax.get_yaxis().get_major_formatter().set_scientific(False)
x_limits = ax.get_xlim()
y_limits = ax.get_ylim()
x_sep = (x_limits[1] - x_limits[0]) / 2.1
y_sep = (y_limits[1] - y_limits[0]) / 2.1
x_majorLocator = MultipleLocator(x_sep)
y_majorLocator = MultipleLocator(y_sep)
ax.xaxis.set_major_locator(x_majorLocator)
ax.yaxis.set_major_locator(y_majorLocator)
#if title != None:
# plt.suptitle(title)
plt.subplots_adjust(wspace=0.3, hspace=0.3)
if outfile != None:
plt.savefig(outfile, bbox_inches='tight', pad_inches=0.05)
return
density = moments[:, :, 0]
j_x = moments[:, :, 1]
j_y = moments[:, :, 2]
lagrange_multipliers = \
io.readBinaryFile(lagrange_multiplier_files[file_number])
lagrange_multipliers = lagrange_multipliers[0].reshape(N_q2, N_q1, 5)
mu = lagrange_multipliers[:, :, 0]
mu_ee = lagrange_multipliers[:, :, 1]
T_ee = lagrange_multipliers[:, :, 2]
vel_drift_x = lagrange_multipliers[:, :, 3]
vel_drift_y = lagrange_multipliers[:, :, 4]
pl.contourf(q1_meshgrid, q2_meshgrid, density.T, 100, cmap='bwr')
pl.title(r'Time = ' + "%.2f"%(time_array[file_number]) + " ps")
pl.streamplot(q1, q2,
vel_drift_x, vel_drift_y,
density=2, color='k',
linewidth=0.7, arrowsize=1
)
pl.xlim([q1[0], q1[-1]])
pl.ylim([q2[0], q2[-1]])
pl.gca().set_aspect('equal')
pl.xlabel(r'$x\;(\mu \mathrm{m})$')
pl.ylabel(r'$y\;(\mu \mathrm{m})$')
pl.suptitle('$\\tau_\mathrm{mc} = \infty$, $\\tau_\mathrm{mr} = \infty$')
pl.savefig('images/dump_' + '%06d'%file_number + '.png')
idx = largest_indices(wcfl, max_locs)
for n in np.arange(max_locs):
k = idx[0][n]
j = idx[1][n]
i = idx[2][n]
print(" N=%3.3d, K=%3.3d, LAT=%7.3f, LON=%7.3f, OMEGA_CFL=%4.2f, W=%4.2f, W+1=%4.2f, DZ=%4.1f, U=%4.1f V=%4.1f " % \
(n, k, lat[j,i], lon[j,i], wcfl[k,j,i], W[k,j,i], W[k+1,j,i], dz[k,j,i], U[k,j,i], V[k,j,i]))
k = idx[0][0]
_w_min = 1.0
ctable = 'viridis'
scale_w_clevels = min(max(np.int(z[k].mean() / 1000.), 1.0), 7.0)
clevels = scale_w_clevels * np.arange(-10., 11., 1.)
wmask = np.ma.masked_array(W[k],
mask=[np.abs(W[k]) <= scale_w_clevels * _w_min])
plot = P.contourf(lon, lat, wmask, clevels, cmap=P.get_cmap(ctable))
#cbar = P.colorbar(plot,location='right',pad="5%")
plot = P.contour(lon, lat, wmask, clevels[::2], colors='k', linewidths=0.5)
#cbar.set_label('%s' % ("$m s^{-1}$"))
title = ("Vertical Velocity K = %d " % (k))
P.title(title, fontsize=10)
P.show()
f.close()
#at = AnchoredText("Max W: %4.1f \n Min W: %4.1f" % (w.max(),w.min()), loc=4, prop=dict(size=6), frameon=True,)
#at.patch.set_boxstyle("round,pad=0.,rounding_size=0.2")
#ax2.add_artist(at)
def plotPosteriorMax(mix, axis):
"""
@param axis: matlab-like axis coordinates: [x_start, x_end, y_start, y_end]
"""
# -5, 10.0, -5.0, 10.0
x = pylab.arange(axis[0], axis[1], 0.1)
y = pylab.arange(axis[2], axis[3], 0.1)
#print len(x)
#print len(y)
# XXX colors hard coded here XXX
color = ['b', 'r', 'g', 'm', 'c', 'y']
assert mix.G <= len(color)
z = numpy.zeros((len(y), len(x)), dtype='Float64')
for i in range(len(y)):
dat = numpy.zeros((len(x), 2), dtype='Float64')
dat[:, 1] = y[i]
dat[:, 0] = x
#print numpy.exp(mix.pdf(dat))
#print "---------------------------\n",dat
l = mixture.get_posterior(mix, dat)
#print l
# XXX pdf is log valued, we want the true value XXX
#print numpy.exp(mix.pdf(dat)).tolist()
for j in range(len(x)):
z[i, j] = numpy.argmax(l[:, j])
#print dat[j,:] ,":",l[:,j],numpy.argmax(l[:,j])
#print dat[j,:] ,":",l[:,j], "=",z[i,j]
#print "---------------------------\n"
#print "z", len(z),'x', len(z[0]) ,'=', len(z) * len(z[0])
print "max", z.max()
#max_val = z.max()
max_val = numpy.log(mix.G) # maximum entropy for a vector of length mix.G
print "theor. max", max_val
step = max_val / 40.0
print "step", step
#pylab.figure(1)
#pylab.contour(x,y,z)
#pylab.figure(2)
#pylab.contour(x,y,z,pylab.arange(0,max_val,step))
#pylab.legend()
pylab.figure()
# pylab.colorbar()
pylab.contourf(x, y, z, cmap=pylab.cm.hsv) # pylab.arange(0,max_val,step)
pylab.title('Posterior Maximum Plot')
def plot_precip_type():
print(" PRECIP TYPE")
# Set Figure Size (1000 x 800)
pylab.figure(figsize=(width,height),frameon=False)
sr = nc.variables['SR']
tsk = nc.variables['TSK']
rainc = nc.variables['RAINC']
rainnc = nc.variables['RAINNC']
type_pct = sr[time]
if time == 0:
prev_total = rainc[time] + rainnc[time]
else:
prev_total = rainc[time-1] + rainnc[time-1]
total_accum = rainc[time] + rainnc[time]
precip_tend = total_accum - prev_total
snow_precip = []
mix_precip = []
rain_precip = []
for j in range(len(precip_tend)):
cur_col_rain = []
cur_col_mix = []
cur_col_snow = []
for i in range(len(precip_tend[0])):
if (0.20 < type_pct[j,i] < 0.90):
cur_col_mix.append(precip_tend[j,i])
cur_col_snow.append(0.)
cur_col_rain.append(0.)
elif (type_pct[j,i] >= 0.90):
cur_col_mix.append(0.)
cur_col_snow.append(precip_tend[j,i])
cur_col_rain.append(0.)
#print type_pct[j,i]
else:
cur_col_mix.append(0.)
cur_col_snow.append(0.)
cur_col_rain.append(precip_tend[j,i])
snow_precip.append(cur_col_snow)
mix_precip.append(cur_col_mix)
rain_precip.append(cur_col_rain)
#print snow_precip
#raw_input()
PCP_LEVELS = [0.01,0.03,0.05,0.10,0.15,0.20,0.25,0.30,0.40,0.50,0.60,0.70,0.80,0.90,1.00,1.25,1.50,1.75,2.00,2.50]
MIXT=pylab.contourf(x,y,mix_precip,PCP_LEVELS,extend='max',cmap=coltbls.mixprecip1())
RAINT=pylab.contourf(x,y,rain_precip,PCP_LEVELS,extend='max',cmap=coltbls.rain1())
SNOWT=pylab.contourf(x,y,snow_precip,PCP_LEVELS,extend='max',cmap=coltbls.snow1())
ftemps = (9./5.)*(temps[time]-273) + 32
ftsk = (9./5.)*(tsk[time] - 273) + 32
T=pylab.contour(x,y,ftemps,[32],colors='red',linestyles='solid')
TS=pylab.contour(x,y,ftsk,[32],colors='purple',linestyles='dashdot')
#RAINT=pylab.contourf(x,y,type_pct,extend='max',cmap=pylab.cm.copper)
title = 'Frozen Precipitation'
prodid = 'ptype'
units = 'in'
drawmap(RAINT, title, prodid, 'in')
# make a plot of the centers of the cells
scat = plt.plot(ra, dec, 'o', c='k', markersize=2)
if straylight:
if magnitudes:
CS = plt.contour(xi,
yi,
zi,
vf,
linewidths=0.5,
colors='k',
extent=extent)
CS = plt.contourf(xi,
yi,
zi,
vf,
cmap=plt.cm.jet,
extent=extent)
else:
CS = plt.contour(xi,
yi,
zi,
vf,
linewidths=0.5,
colors='k',
extent=extent,
locator=ticker.LogLocator())
CS = plt.contourf(xi,
yi,
zi,
vf,
def plot_comp_reflect():
print(" COMP REFLECTIVITY")
# Set Figure Size (1000 x 800)
pylab.figure(figsize=(width,height),frameon=False)
QR = nc.variables['QRAIN']
QS = nc.variables['QSNOW']
# Define 'constant' densities (kg m-3)
rhor = 1000
rhos = 100
rhog = 400
rhoi = 917
# Define "fixed intercepts" (m-4)
Norain = 8.0E6
#Nosnow = 2.0E7
Nosnow = 2.0E6*np.exp(-0.12 * (temps[time]-273))
Nograu = 4.0E6
# First, find the density at the first sigma level
# above the surface
density = np.divide(psfc[time],(287.0 * temps[time]))
#print "Rho: ", np.mean(density)
Qra_all = QR[time]
Qsn_all = QS[time]
for j in range(len(Qra_all[1,:,1])):
curcol_r = []
curcol_s = []
for i in range(len(Qra_all[1,1,:])):
maxrval = np.max(Qra_all[:,j,i])
maxsval = np.max(Qsn_all[:,j,i])
curcol_r.append(maxrval)
curcol_s.append(maxsval)
np_curcol_r = np.array(curcol_r)
np_curcol_s = np.array(curcol_s)
if j == 0:
Qra = np_curcol_r
Qsn = np_curcol_s
else:
Qra = np.row_stack((Qra, np_curcol_r))
Qsn = np.row_stack((Qsn, np_curcol_s))
#print "Qra shp: ", np.shape(Qra)
#print "Den shp: ", np.shape(density)
# Calculate slope factor lambda
lambr = np.divide((3.14159 * Norain * rhor), np.multiply(density, Qra))
lambr = lambr ** 0.25
#lambs = np.divide((3.14159 * Nosnow * rhoi), np.multiply(density, Qsn))
#lambs = lambs ** 0.25
lambs = np.exp(-0.0536 * (temps[time] - 273))
# Calculate equivalent reflectivity factor
Zer = (720.0 * Norain * (lambr ** -7.0)) * 1E18
Zes = (0.224 * 720.0 * Nosnow * (lambr ** -7.0) * (rhos/rhoi) ** 2) * 1E18
Zes_int = np.divide((lambs * Qsn * density), Nosnow)
Zes = ((0.224 * 720 * 1E18) / (3.14159 * rhor) ** 2) * Zes_int ** 2
Ze = np.add(Zer, Zes)
#Ze = Zer
# Convert to dBZ
dBZ = 10 * np.log10(Ze)
dBZ = np.nan_to_num(dBZ)
units = 'dBZe'
print " MAX: ", np.max(dBZ)
# Now plot
REF_LEVELS = range(5,90,5)
CREFLECT=pylab.contourf(x,y,dBZ,REF_LEVELS,cmap=coltbls.reflect())
#SREFLECT=pylab.contourf(x,y,dBZ)
title = 'Simulated Composite Reflectivity'
prodid = 'cref'
drawmap(CREFLECT, title, prodid, units)
#(E_p,E_m,Qj)=IntElfield(theta,1.540562,array([1-.15E-04/2+0.35E-06j/2,1-.45E-04/2+0.60E-05j/2,1]),array([0,1000]))
from paratt import Refl
#c=Refl(theta,1.54,array([1-7.57e-6+1.73e-7j,1-2.24e-5+2.89e-6j,1-7.57e-6+1.73e-7j,1-2.24e-5+2.89e-6j,1-7.57e-6+1.73e-7j,1-2.24e-5+2.89e-6j,1-7.57e-6+1.73e-7j,1]),array([80,20,80,20,80,20]),0)
c = Refl(theta, 1.54,
array([1 - 7.57e-6 + 1.73e-7j, 1 - 2.24e-5 + 2.89e-6j, 1]),
array([0, 1000, 0]), array([0, 0, 0]))
#gplt.plot(theta,log10(abs(E_m[-1]/E_p[-1])**2),theta,log10(abs(c**2)))
#f=f=open('Specrefl.dat','r')
#t=io.read_array(f)
#t=transpose(t)
#gplt.plot(theta,log10(abs(E_m[-1]/E_p[-1])**2),t[0],log10(t[1]))
k = 2 * math.pi / 1.54
n = [1, 1 - 2.24e-5 + 2.89e-6j, 1 - 7.57e-6 + 1.73e-7j]
n = array(n)
z = array([0, -1000])
#(T,R,k)=AmpElfield2(k*cos(theta*math.pi/180),k*ones(theta.shape), n,z)
#(T,R,k)=IntElfield(theta,1.54, n, array([0,1000]))
(T, R, zc, E) = AmpElfield_test(theta, 1.54, n, array([0, 1000, 0]))
#print T[0]
pylab.subplot(211)
pylab.plot(theta, log10(abs(R)), theta, log10(abs(c)), '.-')
pylab.ylabel('R')
pylab.xlabel('theta [deg]')
pylab.legend(('Abeles', 'Parratt'))
pylab.subplot(212)
pylab.contourf(theta, zc, E.transpose())
#print zc.shape, zc[-1]
#print log10(E[0,:]).shape
#pylab.plot(zc, (E[1,:]))
pylab.show()
#map the consistency values into weights
#weights = []
# for user_name in individualConsistency:
# try:
# weights.append(min(1., math.pow(individualConsistency[user_name]/0.6,8.5)))
# except ValueError:
# print individualConsistency[user_name]
# raise
weights = {
user_name: min(
1.,
math.pow(individualConsistency[user_name] / wParam1,
wParam2))
for user_name in individualConsistency
}
#results.append([individualConsistency[user_name] for user_name in individualConsistency])
results.append([weights[user_name] for user_name in weights])
#print len(individualConsistency)
from scipy.stats import ks_2samp
diff = ks_2samp(results[0], results[1])
mesh[i1][i2] = diff[0]
print mesh
import pylab as pl
pl.contourf(param2Range, param1Range, mesh)
#P.hist(results[0], 50, normed=1, histtype='step', cumulative=True)
#P.show()
pl.colorbar()
pl.show()
def embed_dat_matrix_two_dimensions(low_dimension_data_matrix,
y=None,
labels=None,
density_colormap='Blues',
instance_colormap='YlOrRd'):
from sklearn.preprocessing import scale
low_dimension_data_matrix = scale(low_dimension_data_matrix)
# make mesh
x_min, x_max = low_dimension_data_matrix[:, 0].min(
), low_dimension_data_matrix[:, 0].max()
y_min, y_max = low_dimension_data_matrix[:, 1].min(
), low_dimension_data_matrix[:, 1].max()
step_num = 50
h = min((x_max - x_min) / step_num,
(y_max - y_min) / step_num) # step size in the mesh
b = h * 10 # border size
x_min, x_max = low_dimension_data_matrix[:, 0].min(
) - b, low_dimension_data_matrix[:, 0].max() + b
y_min, y_max = low_dimension_data_matrix[:, 1].min(
) - b, low_dimension_data_matrix[:, 1].max() + b
xx, yy = np.meshgrid(np.arange(x_min, x_max, h),
np.arange(y_min, y_max, h))
# induce a one class model to estimate densities
from sklearn.svm import OneClassSVM
gamma = max(x_max - x_min, y_max - y_min)
clf = OneClassSVM(gamma=gamma, nu=0.1)
clf.fit(low_dimension_data_matrix)
# Plot the decision boundary. For that, we will assign a color to each
# point in the mesh [x_min, m_max] . [y_min, y_max].
if hasattr(clf, "decision_function"):
score_matrix = clf.decision_function(np.c_[xx.ravel(), yy.ravel()])
else:
score_matrix = clf.predict_proba(np.c_[xx.ravel(), yy.ravel()])[:, 1]
# Put the result into a color plot
levels = np.linspace(min(score_matrix), max(score_matrix), 40)
score_matrix = score_matrix.reshape(xx.shape)
if y is None:
y = 'white'
plt.contourf(xx,
yy,
score_matrix,
cmap=plt.get_cmap(density_colormap),
alpha=0.9,
levels=levels)
plt.scatter(low_dimension_data_matrix[:, 0],
low_dimension_data_matrix[:, 1],
alpha=.5,
s=70,
edgecolors='gray',
c=y,
cmap=plt.get_cmap(instance_colormap))
# labels
if labels is not None:
for id in range(low_dimension_data_matrix.shape[0]):
label = labels[id]
x = low_dimension_data_matrix[id, 0]
y = low_dimension_data_matrix[id, 1]
plt.annotate(label,
xy=(x, y),
xytext=(0, 0),
textcoords='offset points')
headerfile.close()
rawFilename = header[1].split()[1]
res_x = int(header[2].split()[1][:-1]) # remove the ',' at end of string
res_y = int(header[2].split()[2][:-1]) # remove the ',' at end of string
print 'xdim %s' % res_x
print 'ydim %s' % res_y
data = np.fromfile(rawFilename, dtype=np.double, count=-1, sep='')
assert data.shape[
0] == res_x * res_y, "raw data array does not match the resolution in the header"
x = np.linspace(0., 1., res_x)
y = np.linspace(0., 1. * res_y / res_x, res_y)
X, Y = np.meshgrid(x, y)
# number of contours we wish to see
N = 12
pl.contourf(X, Y, data.reshape(res_y, res_x), N, alpha=.75, cmap='jet')
C = pl.contour(X,
Y,
data.reshape(res_y, res_x),
N,
colors='black',
linewidth=.1)
#pl.clabel(C, inline=1)
pl.axes().set_aspect('equal')
pl.savefig("output.png", dpi=72)
pl.show()
2 * v[1]**0.5,
180 + angle,
color=color)
ell.set_clip_box(splot.bbox)
ell.set_alpha(0.5)
splot.add_artist(ell)
xx, yy = np.meshgrid(np.linspace(4, 8.5, 200), np.linspace(1.5, 4.5, 200))
X_grid = np.c_[xx.ravel(), yy.ravel()]
zz_lda = lda.predict_proba(X_grid)[:, 1].reshape(xx.shape)
zz_qda = qda.predict_proba(X_grid)[:, 1].reshape(xx.shape)
pl.figure()
splot = pl.subplot(1, 2, 1)
pl.contourf(xx, yy, zz_lda > 0.5, alpha=0.5)
pl.scatter(X[y == 0, 0], X[y == 0, 1], c='b', label=target_names[0])
pl.scatter(X[y == 1, 0], X[y == 1, 1], c='r', label=target_names[1])
pl.contour(xx, yy, zz_lda, [0.5], linewidths=2., colors='k')
plot_ellipse(splot, lda.means_[0], lda.covariance_, 'b')
plot_ellipse(splot, lda.means_[1], lda.covariance_, 'r')
pl.legend()
pl.axis('tight')
pl.title('Linear Discriminant Analysis')
splot = pl.subplot(1, 2, 2)
pl.contourf(xx, yy, zz_qda > 0.5, alpha=0.5)
pl.scatter(X[y == 0, 0], X[y == 0, 1], c='b', label=target_names[0])
pl.scatter(X[y == 1, 0], X[y == 1, 1], c='r', label=target_names[1])
pl.contour(xx, yy, zz_qda, [0.5], linewidths=2., colors='k')
plot_ellipse(splot, qda.means_[0], qda.covariances_[0], 'b')
def animate(i):
## create a frame
Z = get_animation_data(i)
contour = pylab.contourf(X, Y, Z, cmap=plt.cm.bone)
plt.title('t = %.1f' % ((nT / n_frames) * (i + 1)))
return contour
np.savetxt(
"%s_V%d_%dd_%dm.dat" %
(orbit_id, mag_max, nb_obs_day, min_t_obs_per_orbit), data_grid)
np.savetxt("ra_grid.dat", ra_grid)
np.savetxt("dec_grid.dat", dec_grid)
data_grid = np.fliplr(data_grid)
ra_grid = rah_grid
v = np.arange(min_val, max_val + step_scale, step_scale)
CS = plt.contour(ra_grid, dec_grid, data_grid, colors='k', levels=v)
plt.clabel(CS, inline=1, fmt='%d', colors='k', fontsize=12)
CS = plt.contourf(ra_grid, dec_grid, data_grid, levels=v, cmap=plt.cm.winter)
plt.yticks(np.arange(-80, 100, 20.))
if include_constellation:
for co in constel.constellations:
co = np.asarray(co, dtype=np.float)
co[:, 1] = co[:, 1] / 1800.
co[:, 2] = co[:, 2] / 60.
idc = np.where(co[:, 1] < 12.)
co[idc, 1] = 12. - co[idc, 1]
idc = np.where(co[:, 1] > 12.)
def plot2d_contour(self,
x=None,
y=None,
what="count(*)",
limits=None,
shape=256,
selection=None,
f="identity",
figsize=None,
xlabel=None,
ylabel=None,
aspect="auto",
levels=None,
fill=False,
colorbar=False,
colorbar_label=None,
colormap=None,
colors=None,
linewidths=None,
linestyles=None,
vmin=None,
vmax=None,
grid=None,
show=None,
**kwargs):
"""
Plot conting contours on 2D grid.
:param x: {expression}
:param y: {expression}
:param what: What to plot, count(*) will show a N-d histogram, mean('x'), the mean of the x column, sum('x') the sum, std('x') the standard deviation, correlation('vx', 'vy') the correlation coefficient. Can also be a list of values, like ['count(x)', std('vx')], (by default maps to column)
:param limits: {limits}
:param shape: {shape}
:param selection: {selection}
:param f: transform values by: 'identity' does nothing 'log' or 'log10' will show the log of the value
:param figsize: (x, y) tuple passed to pylab.figure for setting the figure size
:param xlabel: label of the x-axis (defaults to param x)
:param ylabel: label of the y-axis (defaults to param y)
:param aspect: the aspect ratio of the figure
:param levels: the contour levels to be passed on pylab.contour or pylab.contourf
:param colorbar: plot a colorbar or not
:param colorbar_label: the label of the colourbar (defaults to param what)
:param colormap: matplotlib colormap to pass on to pylab.contour or pylab.contourf
:param colors: the colours of the contours
:params linewidths: the widths of the contours
:params linestyles: the style of the contour lines
:param vmin: instead of automatic normalization, scale the data between vmin and vmax
:param vmax: see vmin
:param grid: {grid}
:param show:
"""
# Get the function out of the string
f = vaex.dataset._parse_f(f)
# Internals on what to bin
binby = []
x = vaex.dataset._ensure_strings_from_expressions(x)
y = vaex.dataset._ensure_strings_from_expressions(y)
for expression in [y, x]:
if expression is not None:
binby = [expression] + binby
# The shape
shape = vaex.dataset._expand_shape(shape, 2)
# The limits and
limits = self.limits(binby, limits)
# Constructing the 2d histogram
if grid is None:
if what:
if isinstance(what, (vaex.stat.Expression)):
grid = what.calculate(self,
binby=binby,
limits=limits,
shape=shape,
selection=selection)
else:
what = what.strip()
index = what.index("(")
groups = re.match("(.*)\((.*)\)", what).groups()
if groups and len(groups) == 2:
function = groups[0]
arguments = groups[1].strip()
functions = ["mean", "sum", "std", "count"]
if function in functions:
# grid = getattr(self, function)(arguments, binby, limits=limits, shape=shape, selection=selection)
grid = getattr(vaex.stat,
function)(arguments).calculate(
self,
binby=binby,
limits=limits,
shape=shape,
selection=selection)
elif function == "count" and arguments == "*":
grid = self.count(binby=binby,
shape=shape,
limits=limits,
selection=selection)
elif function == "cumulative" and arguments == "*":
# TODO: comulative should also include the tails outside limits
grid = self.count(binby=binby,
shape=shape,
limits=limits,
selection=selection)
grid = np.cumsum(grid)
else:
raise ValueError(
"Could not understand method: %s, expected one of %r'"
% (function, functions))
else:
raise ValueError(
"Could not understand 'what' argument %r, expected something in form: 'count(*)', 'mean(x)'"
% what)
else:
grid = self.histogram(binby,
size=shape,
limits=limits,
selection=selection)
# Apply the function on the grid
fgrid = f(grid)
# Figure creation
if figsize is not None:
fig = plt.figure(num=None,
figsize=figsize,
dpi=80,
facecolor='w',
edgecolor='k')
fig = plt.gcf()
# labels
plt.xlabel(xlabel or x)
plt.ylabel(ylabel or y)
# The master contour plot
if fill == False:
value = plt.contour(fgrid.T,
origin="lower",
extent=np.array(limits).ravel().tolist(),
linestyles=linestyles,
linewidths=linewidths,
levels=levels,
colors=colors,
cmap=colormap,
vmin=vmin,
vmax=vmax,
**kwargs)
else:
value = plt.contourf(fgrid.T,
origin="lower",
extent=np.array(limits).ravel().tolist(),
linestyles=linestyles,
levels=levels,
colors=colors,
cmap=colormap,
vmin=vmin,
vmax=vmax,
**kwargs)
if colorbar:
plt.colorbar(label=colorbar_label or what)
# Wrap things up
if show:
plt.show()
return value
def graph_dos_real_space_atk(self):
#print "NUMBER OF LDDSO BJECTS"
#print len(nlread(self.device_config_path, LocalDeviceDensityOfStates))
lddos_list = nlread(self.device_config_path,
LocalDeviceDensityOfStates)
if not lddos_list:
self.generate_dos_real_space()
lddos_list = nlread(self.device_config_path,
LocalDeviceDensityOfStates)
#Find the z-spacing
dX, dY, dZ = lddos_list[0].volumeElement().convertTo(Ang)
dz = dZ.norm()
shape = lddos_list[0].shape()
z = dz * numpy.arange(shape[2])
# calculate average lddos along z for each spectrum
energies = []
lddos_z = []
for lddos in lddos_list:
energies = energies + [lddos.energy().inUnitsOf(eV)]
avg_z = numpy.apply_over_axes(numpy.mean, lddos[:, :, :],
[0, 1]).flatten()
lddos_z = lddos_z + [avg_z]
# plot as contour plot
# make variables
energies = numpy.array(energies)
X, Y = numpy.meshgrid(z, energies)
Z = numpy.array(lddos_z).reshape(numpy.shape(X))
#print "X = "
#print X
#print "Y = "
#print Y
#print "Z = "
#print Z
#print "X min, max"
#print numpy.amax(X)
#print numpy.amin(X)
#print "Y min, max"
#print numpy.amax(Y)
#print numpy.amin(Y)
#print "Z min, max"
#print numpy.amax(Z)
#print numpy.amin(Z)
import pylab
#plot the LDDOS(E, z)
pylab.xlabel('z (Angstrom)', fontsize=12, family='sans-serif')
pylab.ylabel('Energy (eV)', fontsize=12, family='sans-serif')
contour_values = numpy.linspace(0, numpy.amax(Z), 25)
pylab.contourf(X, Y, Z, contour_values)
pylab.colorbar()
pylab.axis(
[numpy.amin(X),
numpy.amax(X),
numpy.amin(Y),
numpy.amax(Y)])
pylab.title(self.device_config_path + ": E vs. z")
pylab.savefig(self.device_config_path + 'lddos.png', dpi=100)
density = density + np.flip(density, axis=1)
density_min = -0.0015 #np.min(density)
density_max = 0.0015 #np.max(density)
J = np.sqrt(j_x**2 + j_y**2)
j_x_m = np.ma.masked_where(J < 2e-10, j_x)
j_y_m = np.ma.masked_where(J < 2e-10, j_y)
print("x.shape : ", x.shape)
# plot_grid(x[::1, ::1], y[::1, ::1], alpha=0.5)
#im = pl.contourf(x, y, density.T, 100, norm=MidpointNormalize(midpoint=0, vmin=density_min, vmax=density_max), cmap='bwr')
im = pl.contourf(x,
y,
density.T,
200,
norm=colors.SymLogNorm(linthresh=density.max() / 20,
vmin=density_min,
vmax=density_max),
cmap='bwr')
m = pl.cm.ScalarMappable(cmap='bwr')
m.set_array(density.T)
m.set_clim(density_min, density_max)
pl.colorbar(m, boundaries=np.linspace(density_min, density_max, 100))
pl.title(r'Time = ' + "%.2f" % (time_array[start_index + file_number]) +
" ps")
#pl.streamplot(x[:, 0], y[0, :],
# j_x_m, j_y_m,
# density=2, color='k',
# linewidth=1, arrowsize=1.2
# )
y = np.arange(-1, 13, dx)
x_src = np.array([1, 2.50, 2.5, 1])
y_src = np.array([1, 5, 10, 1])
x_src = np.array([1, 1, 1, 1])
y_src = np.array([10, 7, 4, 1])
S = np.array([x_src, y_src]).transpose()
xx, yy = np.meshgrid(x, y)
V = 0.1 * np.ones_like(xx)
V[yy > 6] = 0.15
V[np.logical_and(np.abs(yy) > 7, xx > 2.5)] = 0.18
t_map = eikonal(x, y, [], V, S)
#%%
plt.subplot(1, 1, 1)
plt.pcolor(x, y, V)
plt.axis('image')
plt.show
#%%
for i in range(S.shape[0]):
plt.subplot(1, S.shape[0] + 1, i + 1)
plt.contourf(x, y, t_map[i])
plt.axis('image')
plt.show()
