def showText(self):
"""
Creates a dialog to show the generated text output.
"""
try:
generatedText = self.genText()
except ValueError:
return
self.txtwin = QDialog()
self.txtedt = QTextEdit()
self.txtbtn = QPushButton('OK')
self.txtwin.layout = QVBoxLayout(self.txtwin)
self.txtwin.layout.addWidget(self.txtedt)
self.txtwin.layout.addWidget(self.txtbtn)
self.txtbtn.clicked.connect(self.txtwin.deleteLater)
self.txtedt.setText(generatedText)
self.txtedt.setReadOnly(True)
self.txtwin.setWindowTitle('Resolution information')
self.txtwin.setWindowModality(Qt.ApplicationModal)
self.txtwin.setAttribute(Qt.WA_DeleteOnClose)
self.txtwin.setMinimumSize(400, 600)
self.txtwin.resize(400, 600)
self.txtwin.show()
self.txtloop = QEventLoop()
self.txtloop.exec_()
def _wait_reply(self, call_id, call_name, timeout):
"""Wait for the other side reply."""
if call_id in self._reply_inbox:
return
# Create event loop to wait with
wait_loop = QEventLoop()
self._sig_got_reply.connect(wait_loop.quit)
wait_timeout = QTimer()
wait_timeout.setSingleShot(True)
wait_timeout.timeout.connect(wait_loop.quit)
# Wait until the kernel returns the value
wait_timeout.start(timeout * 1000)
while len(self._reply_waitlist) > 0:
if not wait_timeout.isActive():
self._sig_got_reply.disconnect(wait_loop.quit)
if call_id in self._reply_waitlist:
raise TimeoutError("Timeout while waiting for {}".format(
self._reply_waitlist))
return
wait_loop.exec_()
wait_timeout.stop()
self._sig_got_reply.disconnect(wait_loop.quit)
def save_notebook(self, client):
"""
Save notebook corresponding to given client.
If the notebook is newly created and not empty, then ask the user for
a new filename and save under that name.
This function is called when the user closes a tab.
"""
client.save()
# Check filename to find out whether notebook is newly created
path = client.get_filename()
dirname, basename = osp.split(path)
if dirname != NOTEBOOK_TMPDIR or not basename.startswith('untitled'):
return
# Read file to see whether notebook is empty
wait_save = QEventLoop()
QTimer.singleShot(1000, wait_save.quit)
wait_save.exec_()
nb_contents = nbformat.read(path, as_version=4)
if (len(nb_contents['cells']) == 0
or len(nb_contents['cells'][0]['source']) == 0):
return
# Ask user to save notebook with new filename
buttons = QMessageBox.Yes | QMessageBox.No
text = _("<b>{0}</b> has been modified.<br>"
"Do you want to save changes?").format(basename)
answer = QMessageBox.question(self, self.get_plugin_title(), text,
buttons)
if answer == QMessageBox.Yes:
self.save_as(close=True)
def onHelp(self):
"""
Shows the help page
"""
try:
from pymantidplot.proxies import showCustomInterfaceHelp
showCustomInterfaceHelp("PyChop")
except ImportError:
helpTxt = "PyChop is a tool to allow direct inelastic neutron\nscattering users to estimate the inelastic resolution\n"
helpTxt += "and incident flux for a given spectrometer setting.\n\nFirst select the instrument, chopper settings and\n"
helpTxt += "Ei, and then click 'Calculate and Plot'. Data for all\nthe graphs will be generated (may take 1-2s) and\n"
helpTxt += "all graphs will be updated. If the 'Hold current plot'\ncheck box is ticked, additional settings will be\n"
helpTxt += "overplotted on the existing graphs if they are\ndifferent from previous settings.\n\nMore in-depth help "
helpTxt += "can be obtained from the\nMantid help pages."
self.hlpwin = QDialog()
self.hlpedt = QLabel(helpTxt)
self.hlpbtn = QPushButton('OK')
self.hlpwin.layout = QVBoxLayout(self.hlpwin)
self.hlpwin.layout.addWidget(self.hlpedt)
self.hlpwin.layout.addWidget(self.hlpbtn)
self.hlpbtn.clicked.connect(self.hlpwin.deleteLater)
self.hlpwin.setWindowTitle('Help')
self.hlpwin.setWindowModality(Qt.ApplicationModal)
self.hlpwin.setAttribute(Qt.WA_DeleteOnClose)
self.hlpwin.setMinimumSize(370, 300)
self.hlpwin.resize(370, 300)
self.hlpwin.show()
self.hlploop = QEventLoop()
self.hlploop.exec_()
def get_value(self, name):
"""Ask kernel for a value"""
# Don't ask for values while reading (ipdb) is active
if self._reading:
raise ValueError(
_("Inspecting and setting values while debugging "
"in IPython consoles is not supported yet by "
"TRex."))
# Wait until the kernel returns the value
wait_loop = QEventLoop()
self.sig_got_reply.connect(wait_loop.quit)
self.silent_execute("get_ipython().kernel.get_value('%s')" % name)
wait_loop.exec_()
# Remove loop connection and loop
self.sig_got_reply.disconnect(wait_loop.quit)
wait_loop = None
# Handle exceptions
if self._kernel_value is None:
if self._kernel_reply:
msg = self._kernel_reply[:]
self._kernel_reply = None
raise ValueError(msg)
return self._kernel_value
def get_value(self, name):
"""Ask kernel for a value"""
# Don't ask for values while reading (ipdb) is active
if self._reading:
raise ValueError(_("Inspecting and setting values while debugging "
"in IPython consoles is not supported yet by "
"Spyder."))
# Wait until the kernel returns the value
wait_loop = QEventLoop()
self.sig_got_reply.connect(wait_loop.quit)
self.silent_execute("get_ipython().kernel.get_value('%s')" % name)
wait_loop.exec_()
# Remove loop connection and loop
self.sig_got_reply.disconnect(wait_loop.quit)
wait_loop = None
# Handle exceptions
if self._kernel_value is None:
if self._kernel_reply:
msg = self._kernel_reply[:]
self._kernel_reply = None
raise ValueError(msg)
return self._kernel_value
def silent_exec_input(self, code):
"""Silently execute code through stdin"""
self._hidden = True
# Wait until the kernel returns an answer
wait_loop = QEventLoop()
self.sig_input_reply.connect(wait_loop.quit)
self.kernel_client.iopub_channel.flush()
self.kernel_client.input(code)
wait_loop.exec_()
# Remove loop connection and loop
self.sig_input_reply.disconnect(wait_loop.quit)
wait_loop = None
# Restore hidden state
self._hidden = False
# Emit signal
if 'pdb_step' in code and self._input_reply is not None:
fname = self._input_reply['fname']
lineno = self._input_reply['lineno']
self.sig_pdb_step.emit(fname, lineno)
elif 'get_namespace_view' in code:
view = self._input_reply
self.sig_namespace_view.emit(view)
elif 'get_var_properties' in code:
properties = self._input_reply
self.sig_var_properties.emit(properties)
def _loadPage(self):
html_path = self._get_page_path()
# QEventLoop is used to make the page loading behave syncronously
init_loop = QEventLoop()
self._page.loadFinished.connect(init_loop.quit)
self._page.load(QUrl().fromLocalFile(html_path))
init_loop.exec_()
def get_value(self, name):
"""Ask kernel for a value"""
code = u"get_ipython().kernel.get_value('%s')" % name
if self._reading:
method = self.kernel_client.input
code = u'!' + code
else:
method = self.silent_execute
# Wait until the kernel returns the value
wait_loop = QEventLoop()
self.sig_got_reply.connect(wait_loop.quit)
method(code)
wait_loop.exec_()
# Remove loop connection and loop
self.sig_got_reply.disconnect(wait_loop.quit)
wait_loop = None
# Handle exceptions
if self._kernel_value is None:
if self._kernel_reply:
msg = self._kernel_reply[:]
self._kernel_reply = None
raise ValueError(msg)
return self._kernel_value
def silent_exec_input(self, code):
"""Silently execute code through stdin"""
self._hidden = True
# Wait until the kernel returns an answer
wait_loop = QEventLoop()
self.sig_input_reply.connect(wait_loop.quit)
self.kernel_client.iopub_channel.flush()
self.kernel_client.input(code)
wait_loop.exec_()
# Remove loop connection and loop
self.sig_input_reply.disconnect(wait_loop.quit)
wait_loop = None
# Restore hidden state
self._hidden = False
# Emit signal
if 'pdb_step' in code and self._input_reply is not None:
fname = self._input_reply['fname']
lineno = self._input_reply['lineno']
self.sig_pdb_step.emit(fname, lineno)
elif 'get_namespace_view' in code:
view = self._input_reply
self.sig_namespace_view.emit(view)
elif 'get_var_properties' in code:
properties = self._input_reply
self.sig_var_properties.emit(properties)
def _wait(self, condition, signal, timeout_msg, timeout):
"""
Wait until condition() is True by running an event loop.
signal: qt signal that should interrupt the event loop.
timeout_msg: Message to display in case of a timeout.
timeout: time in seconds before a timeout
"""
if condition():
return
# Create event loop to wait with
wait_loop = QEventLoop()
signal.connect(wait_loop.quit)
wait_timeout = QTimer()
wait_timeout.setSingleShot(True)
wait_timeout.timeout.connect(wait_loop.quit)
# Wait until the kernel returns the value
wait_timeout.start(timeout * 1000)
while not condition():
if not wait_timeout.isActive():
signal.disconnect(wait_loop.quit)
if not condition():
raise TimeoutError(timeout_msg)
return
wait_loop.exec_()
wait_timeout.stop()
signal.disconnect(wait_loop.quit)
def wait_input(self, prompt=''):
"""Wait for input (raw_input support)"""
self.new_prompt(prompt)
self.setFocus()
self.input_mode = True
self.input_loop = QEventLoop()
self.input_loop.exec_()
self.input_loop = None
def run(self, installSignalHandlers=True):
if self._ownApp:
self._blockApp = self.qApp
else:
self._blockApp = QEventLoop()
self.runReturn()
self._blockApp.exec_()
if self.running:
self.stop()
self.runUntilCurrent()
def get_source(self, objtxt):
"""Get object source"""
wait_loop = QEventLoop()
self.sig_got_reply.connect(wait_loop.quit)
self.silent_exec_method("get_ipython().kernel.get_source('%s')" % objtxt)
wait_loop.exec_()
# Remove loop connection and loop
self.sig_got_reply.disconnect(wait_loop.quit)
wait_loop = None
return self._kernel_reply
def get_doc(self, objtxt):
"""Get object documentation dictionary"""
wait_loop = QEventLoop()
self.sig_got_reply.connect(wait_loop.quit)
self.silent_exec_method("get_ipython().kernel.get_doc('%s')" % objtxt)
wait_loop.exec_()
# Remove loop connection and loop
self.sig_got_reply.disconnect(wait_loop.quit)
wait_loop = None
return self._kernel_reply
def load_data(self, filename, ext):
# Wait until the kernel tries to load the file
wait_loop = QEventLoop()
self.sig_got_reply.connect(wait_loop.quit)
self.silent_exec_method(
"get_ipython().kernel.load_data('%s', '%s')" % (filename, ext))
wait_loop.exec_()
# Remove loop connection and loop
self.sig_got_reply.disconnect(wait_loop.quit)
wait_loop = None
return self._kernel_reply
def openMovieSelection(self, movie: Movie(), result: list()):
select = MovieSelectionWindow(movie.file.fullNameAndPath, result)
select.setWindowModality(Qt.WindowModal)
mw = qtmodern.windows.ModernWindow(select)
mw.setWindowModality(Qt.WindowModal)
mw.show()
# This loop will wait for the window is destroyed
loop = QEventLoop()
select.finished.connect(loop.quit)
loop.exec()
return select.acceptedId
def load_data(self, filename, ext):
# Wait until the kernel tries to load the file
wait_loop = QEventLoop()
self.sig_got_reply.connect(wait_loop.quit)
self.silent_exec_method(r"get_ipython().kernel.load_data('%s', '%s')" %
(filename, ext))
wait_loop.exec_()
# Remove loop connection and loop
self.sig_got_reply.disconnect(wait_loop.quit)
wait_loop = None
return self._kernel_reply
def openShowSelection(self, show: TvShow(), result: list()):
select = ShowSelectionWindow(show.estimatedTitle, result)
select.setWindowModality(Qt.WindowModal)
mw = qtmodern.windows.ModernWindow(select)
mw.setWindowModality(Qt.WindowModal)
mw.show()
# This loop will wait for the window is destroyed
loop = QEventLoop()
select.finished.connect(loop.quit)
loop.exec()
return select.acceptedId
def save_namespace(self, filename):
# Wait until the kernel tries to save the file
wait_loop = QEventLoop()
self.sig_got_reply.connect(wait_loop.quit)
self.silent_exec_method("get_ipython().kernel.save_namespace('%s')" %
filename)
wait_loop.exec_()
# Remove loop connection and loop
self.sig_got_reply.disconnect(wait_loop.quit)
wait_loop = None
return self._kernel_reply
def write_to_stdin(self, line):
"""Send raw characters to the IPython kernel through stdin"""
wait_loop = QEventLoop()
self.sig_prompt_ready.connect(wait_loop.quit)
self.kernel_client.input(line)
wait_loop.exec_()
# Remove loop connection and loop
self.sig_prompt_ready.disconnect(wait_loop.quit)
wait_loop = None
# Run post exec commands
self._post_exec_input(line)
def write_to_stdin(self, line):
"""Send raw characters to the IPython kernel through stdin"""
wait_loop = QEventLoop()
self.sig_prompt_ready.connect(wait_loop.quit)
self.kernel_client.input(line)
wait_loop.exec_()
# Remove loop connection and loop
self.sig_prompt_ready.disconnect(wait_loop.quit)
wait_loop = None
# Run post exec commands
self._post_exec_input(line)
def save_namespace(self, filename):
# Wait until the kernel tries to save the file
wait_loop = QEventLoop()
self.sig_got_reply.connect(wait_loop.quit)
self.silent_exec_method(r"get_ipython().kernel.save_namespace('%s')" %
filename)
wait_loop.exec_()
# Remove loop connection and loop
self.sig_got_reply.disconnect(wait_loop.quit)
wait_loop = None
return self._kernel_reply
def get_doc(self, objtxt):
"""Get object documentation dictionary"""
if self._reading:
return
wait_loop = QEventLoop()
self.sig_got_reply.connect(wait_loop.quit)
self.silent_exec_method("get_ipython().kernel.get_doc('%s')" % objtxt)
wait_loop.exec_()
# Remove loop connection and loop
self.sig_got_reply.disconnect(wait_loop.quit)
wait_loop = None
return self._kernel_reply
def is_defined(self, objtxt, force_import=False):
"""Return True if object is defined"""
wait_loop = QEventLoop()
self.sig_got_reply.connect(wait_loop.quit)
self.silent_exec_method(
"get_ipython().kernel.is_defined('%s', force_import=%s)"
% (objtxt, force_import))
wait_loop.exec_()
# Remove loop connection and loop
self.sig_got_reply.disconnect(wait_loop.quit)
wait_loop = None
return self._kernel_reply
def is_defined(self, objtxt, force_import=False):
"""Return True if object is defined"""
wait_loop = QEventLoop()
self.sig_got_reply.connect(wait_loop.quit)
self.silent_exec_method(
"get_ipython().kernel.is_defined('%s', force_import=%s)" %
(objtxt, force_import))
wait_loop.exec_()
# Remove loop connection and loop
self.sig_got_reply.disconnect(wait_loop.quit)
wait_loop = None
return self._kernel_reply
def get_source(self, objtxt):
"""Get object source"""
if self._reading:
return
wait_loop = QEventLoop()
self.sig_got_reply.connect(wait_loop.quit)
self.silent_exec_method("get_ipython().kernel.get_source('%s')" % objtxt)
wait_loop.exec_()
# Remove loop connection and loop
self.sig_got_reply.disconnect(wait_loop.quit)
wait_loop = None
return self._kernel_reply
def enterId(self):
select = CustomEnterWindow(True)
select.setWindowModality(Qt.WindowModal)
mw = qtmodern.windows.ModernWindow(select)
mw.setWindowModality(Qt.WindowModal)
mw.show()
select.ui.txtId.setFocus()
loop = QEventLoop()
select.finished.connect(loop.quit)
loop.exec()
if select.result != None and select.result.isdecimal():
self.acceptedId = int(select.result)
self.close()
def __enterTitleWindow__(self, search):
select = CustomEnterWindow(False)
select.setWindowModality(Qt.WindowModal)
mw = qtmodern.windows.ModernWindow(select)
mw.setWindowModality(Qt.WindowModal)
mw.show()
select.ui.txtId.setFocus()
loop = QEventLoop()
select.finished.connect(loop.quit)
loop.exec()
if select.result != None:
self.__possibilities__ = search(select.result)
self.actualizeTable()
def close_client(self, index=None, client=None, save=False):
"""Close client tab from index or widget (or close current tab)."""
if not self.tabwidget.count():
return
if client is not None:
index = self.tabwidget.indexOf(client)
if index is None and client is None:
index = self.tabwidget.currentIndex()
if index is not None:
client = self.tabwidget.widget(index)
is_welcome = client.get_filename() == WELCOME
if not save and not is_welcome:
client.save()
wait_save = QEventLoop()
QTimer.singleShot(1000, wait_save.quit)
wait_save.exec_()
path = client.get_filename()
fname = osp.basename(path)
nb_contents = nbformat.read(path, as_version=4)
if ('untitled' in fname and len(nb_contents['cells']) > 0
and len(nb_contents['cells'][0]['source']) > 0):
buttons = QMessageBox.Yes | QMessageBox.No
answer = QMessageBox.question(
self, self.get_plugin_title(),
_("<b>{0}</b> has been modified."
"<br>Do you want to "
"save changes?".format(fname)), buttons)
if answer == QMessageBox.Yes:
self.save_as(close=True)
if not is_welcome:
client.shutdown_kernel()
client.close()
# Delete notebook file if it is in temporary directory
filename = client.get_filename()
if filename.startswith(get_temp_dir()):
try:
os.remove(filename)
except EnvironmentError:
pass
# Note: notebook index may have changed after closing related widgets
self.tabwidget.removeTab(self.tabwidget.indexOf(client))
self.clients.remove(client)
self.create_welcome_client()
def showText(self):
"""
Creates a dialog to show the generated text output.
"""
try:
generatedText = self.genText()
except ValueError:
return
self.txtwin = QDialog()
self.txtedt = QTextEdit()
self.txtbtn = QPushButton('OK')
self.txtwin.layout = QVBoxLayout(self.txtwin)
self.txtwin.layout.addWidget(self.txtedt)
self.txtwin.layout.addWidget(self.txtbtn)
self.txtbtn.clicked.connect(self.txtwin.deleteLater)
self.txtedt.setText(generatedText)
self.txtedt.setReadOnly(True)
self.txtwin.setWindowTitle('Resolution information')
self.txtwin.setWindowModality(Qt.ApplicationModal)
self.txtwin.setAttribute(Qt.WA_DeleteOnClose)
self.txtwin.setMinimumSize(400, 600)
self.txtwin.resize(400, 600)
self.txtwin.show()
self.txtloop = QEventLoop()
self.txtloop.exec_()
def onHelp(self):
"""
Shows the help page
"""
try:
from pymantidplot.proxies import showCustomInterfaceHelp
showCustomInterfaceHelp("PyChop")
except ImportError:
helpTxt = "PyChop is a tool to allow direct inelastic neutron\nscattering users to estimate the inelastic resolution\n"
helpTxt += "and incident flux for a given spectrometer setting.\n\nFirst select the instrument, chopper settings and\n"
helpTxt += "Ei, and then click 'Calculate and Plot'. Data for all\nthe graphs will be generated (may take 1-2s) and\n"
helpTxt += "all graphs will be updated. If the 'Hold current plot'\ncheck box is ticked, additional settings will be\n"
helpTxt += "overplotted on the existing graphs if they are\ndifferent from previous settings.\n\nMore in-depth help "
helpTxt += "can be obtained from the\nMantid help pages."
self.hlpwin = QDialog()
self.hlpedt = QLabel(helpTxt)
self.hlpbtn = QPushButton('OK')
self.hlpwin.layout = QVBoxLayout(self.hlpwin)
self.hlpwin.layout.addWidget(self.hlpedt)
self.hlpwin.layout.addWidget(self.hlpbtn)
self.hlpbtn.clicked.connect(self.hlpwin.deleteLater)
self.hlpwin.setWindowTitle('Help')
self.hlpwin.setWindowModality(Qt.ApplicationModal)
self.hlpwin.setAttribute(Qt.WA_DeleteOnClose)
self.hlpwin.setMinimumSize(370, 300)
self.hlpwin.resize(370, 300)
self.hlpwin.show()
self.hlploop = QEventLoop()
self.hlploop.exec_()
def get_text(self) -> str:
"""
获取文本内容
:return:
"""
self.contentEdit.signal_request_text.emit()
self.loop = QEventLoop()
_text = ''
def f(text):
self.loop.quit()
_text = text
self.contentEdit.signal_text_got.connect(f)
self.loop.exec_()
return _text
def wait_input(self, prompt=''):
"""Wait for input (raw_input support)"""
self.new_prompt(prompt)
self.setFocus()
self.input_mode = True
self.input_loop = QEventLoop()
self.input_loop.exec_()
self.input_loop = None
def save_namespace(self, filename):
if self._reading:
message = _("Saving data while debugging is not supported.")
QMessageBox.warning(self, _("Warning"), message)
return
# Wait until the kernel tries to save the file
wait_loop = QEventLoop()
self.sig_got_reply.connect(wait_loop.quit)
self.silent_exec_method(r"get_ipython().kernel.save_namespace('%s')" %
filename)
wait_loop.exec_()
# Remove loop connection and loop
self.sig_got_reply.disconnect(wait_loop.quit)
wait_loop = None
return self._kernel_reply
def load_data(self, filename, ext):
if self._reading:
message = _("Loading this kind of data while debugging is not "
"supported.")
QMessageBox.warning(self, _("Warning"), message)
return
# Wait until the kernel tries to load the file
wait_loop = QEventLoop()
self.sig_got_reply.connect(wait_loop.quit)
self.silent_exec_method(
r"get_ipython().kernel.load_data('%s', '%s')" % (filename, ext))
wait_loop.exec_()
# Remove loop connection and loop
self.sig_got_reply.disconnect(wait_loop.quit)
wait_loop = None
return self._kernel_reply
def _wait(self, condition, signal, timeout_msg, timeout):
"""
Wait until condition() is True by running an event loop.
signal: qt signal that should interrupt the event loop.
timeout_msg: Message to display in case of a timeout.
timeout: time in seconds before a timeout
"""
# Exit if condition is fulfilled or the kernel is dead.
if condition():
return
if not self.kernel_client.is_alive():
raise RuntimeError("Kernel is dead")
# Create event loop to wait with
wait_loop = QEventLoop()
wait_timeout = QTimer()
wait_timeout.setSingleShot(True)
# Connect signals to stop kernel loop
wait_timeout.timeout.connect(wait_loop.quit)
self.kernel_client.hb_channel.kernel_died.connect(wait_loop.quit)
signal.connect(wait_loop.quit)
# Wait until the kernel returns the value
wait_timeout.start(timeout * 1000)
while not condition():
if not wait_timeout.isActive():
signal.disconnect(wait_loop.quit)
self.kernel_client.hb_channel.kernel_died.disconnect(
wait_loop.quit)
if condition():
return
if not self.kernel_client.is_alive():
raise RuntimeError("Kernel is dead")
raise TimeoutError(timeout_msg)
wait_loop.exec_()
wait_timeout.stop()
signal.disconnect(wait_loop.quit)
self.kernel_client.hb_channel.kernel_died.disconnect(
wait_loop.quit)
def wait_and_check_if_empty(filename):
"""
Wait until notebook is created and check whether it is empty.
Repeatedly try to read the file, waiting a bit after every attempt.
At the first attempt where the file exists, test whether it is empty
and return. If it takes too long before the file is created, pretend
it is empty.
Parameters
----------
filename : str
File name of notebook to be checked.
Returns
-------
True if notebook is empty or on timeout, False otherwise.
"""
for iteration in range(WAIT_SAVE_ITERATIONS):
# Wait a bit
wait_save = QEventLoop()
QTimer.singleShot(WAIT_SAVE_DELAY, wait_save.quit)
wait_save.exec_()
# Try reading the file
try:
nb_contents = nbformat.read(filename, as_version=4)
except FileNotFoundError:
continue
# If empty, we are done
if (len(nb_contents['cells']) == 0
or len(nb_contents['cells'][0]['source']) == 0):
return True
else:
return False
else:
# It is taking longer than expected;
# Just return True and hope for the best
return True
def save_notebook(self, client):
"""
Save notebook corresponding to given client.
If the notebook is newly created and not empty, then ask the user
whether to save it under a new name.
Parameters
----------
client : NotebookClient
Client of notebook to be saved.
Returns
-------
The file name of the notebook.
"""
client.save()
filename = client.filename
if not self.is_newly_created(client):
return filename
# Read file to see whether notebook is empty
wait_save = QEventLoop()
QTimer.singleShot(1000, wait_save.quit)
wait_save.exec_()
nb_contents = nbformat.read(filename, as_version=4)
if (len(nb_contents['cells']) == 0
or len(nb_contents['cells'][0]['source']) == 0):
return filename
# Ask user to save notebook with new filename
buttons = QMessageBox.Yes | QMessageBox.No
text = _("<b>{0}</b> has been modified.<br>"
"Do you want to save changes?").format(osp.basename(filename))
answer = QMessageBox.question(
self, _('Save changes'), text, buttons)
if answer == QMessageBox.Yes:
return self.save_as(reopen_after_save=False)
else:
return filename
def _mx_wait_reply(self, usrexp, sig, code=''):
wait_loop = QEventLoop()
sig.connect(wait_loop.quit)
self.mx_silent_exec_method(usrexp, code)
wait_loop.exec_()
# Remove loop connection and loop
sig.disconnect(wait_loop.quit)
wait_loop = None
if spyder.version_info < (4, ):
# Handle exceptions
if sig not in self.mx_nondata_msgs:
if self._mx_value is None:
if self._kernel_reply:
msg = self._kernel_reply[:]
self._kernel_reply = None
raise ValueError(msg)
result = self._mx_value
self._mx_value = None
return result
class PyChopGui(QMainWindow):
"""
GUI Class using PyQT for PyChop to help users plan inelastic neutron experiments
at spallation sources by calculating the resolution and flux at a given neutron energies.
"""
instruments = {}
choppers = {}
minE = {}
maxE = {}
def __init__(self):
super(PyChopGui, self).__init__()
self.folder = os.path.dirname(sys.modules[self.__module__].__file__)
for fname in os.listdir(self.folder):
if fname.endswith('.yaml'):
instobj = Instrument(os.path.join(self.folder, fname))
self.instruments[instobj.name] = instobj
self.choppers[instobj.name] = instobj.getChopperNames()
self.minE[instobj.name] = max([instobj.emin, 0.01])
self.maxE[instobj.name] = instobj.emax
self.drawLayout()
self.setInstrument(list(self.instruments.keys())[0])
self.resaxes_xlim = 0
self.qeaxes_xlim = 0
self.isFramePlotted = 0
def setInstrument(self, instname):
"""
Defines the instrument parameters by the name of the instrument.
"""
self.engine = self.instruments[str(instname)]
self.tabs.setTabEnabled(self.tdtabID, False)
self.widgets['ChopperCombo']['Combo'].clear()
self.widgets['FrequencyCombo']['Combo'].clear()
self.widgets['FrequencyCombo']['Label'].setText('Frequency')
self.widgets['PulseRemoverCombo']['Combo'].clear()
for item in self.choppers[str(instname)]:
self.widgets['ChopperCombo']['Combo'].addItem(item)
rep = self.engine.moderator.source_rep
maxfreq = self.engine.chopper_system.max_frequencies
# At the moment, the GUI only supports up to two independent frequencies
if not hasattr(maxfreq, '__len__') or len(maxfreq) == 1:
self.widgets['PulseRemoverCombo']['Combo'].hide()
self.widgets['PulseRemoverCombo']['Label'].hide()
for fq in range(rep, (maxfreq[0] if hasattr(maxfreq, '__len__') else maxfreq) + 1, rep):
self.widgets['FrequencyCombo']['Combo'].addItem(str(fq))
if hasattr(self.engine.chopper_system, 'frequency_names'):
self.widgets['FrequencyCombo']['Label'].setText(self.engine.chopper_system.frequency_names[0])
else:
self.widgets['PulseRemoverCombo']['Combo'].show()
self.widgets['PulseRemoverCombo']['Label'].show()
if hasattr(self.engine.chopper_system, 'frequency_names'):
for idx, chp in enumerate([self.widgets['FrequencyCombo']['Label'], self.widgets['PulseRemoverCombo']['Label']]):
chp.setText(self.engine.chopper_system.frequency_names[idx])
for fq in range(rep, maxfreq[0] + 1, rep):
self.widgets['FrequencyCombo']['Combo'].addItem(str(fq))
for fq in range(rep, maxfreq[1] + 1, rep):
self.widgets['PulseRemoverCombo']['Combo'].addItem(str(fq))
if len(self.engine.chopper_system.choppers) > 1:
self.widgets['MultiRepCheck'].setEnabled(True)
self.tabs.setTabEnabled(self.tdtabID, True)
else:
self.widgets['MultiRepCheck'].setEnabled(False)
self.widgets['MultiRepCheck'].setChecked(False)
self.widgets['Chopper2Phase']['Edit'].hide()
self.widgets['Chopper2Phase']['Label'].hide()
if self.engine.chopper_system.isPhaseIndependent:
self.widgets['Chopper2Phase']['Edit'].show()
self.widgets['Chopper2Phase']['Label'].show()
self.widgets['Chopper2Phase']['Edit'].setText(str(self.engine.chopper_system.defaultPhase[0]))
self.widgets['Chopper2Phase']['Label'].setText(self.engine.chopper_system.phaseNames[0])
# Special case for MERLIN - hide phase control from normal users
if 'MERLIN' in str(instname) and not self.instSciAct.isChecked():
self.widgets['Chopper2Phase']['Edit'].hide()
self.widgets['Chopper2Phase']['Label'].hide()
self.engine.setChopper(str(self.widgets['ChopperCombo']['Combo'].currentText()))
self.engine.setFrequency(float(self.widgets['FrequencyCombo']['Combo'].currentText()))
val = self.flxslder.val * self.maxE[self.engine.instname] / 100
self.flxedt.setText('%3.2f' % (val))
nframe = self.engine.moderator.n_frame if hasattr(self.engine.moderator, 'n_frame') else 1
self.repfig_nframe_edit.setText(str(nframe))
self.repfig_nframe_rep1only.setChecked(False)
if hasattr(self.engine.chopper_system, 'default_frequencies'):
cb = [self.widgets['FrequencyCombo']['Combo'], self.widgets['PulseRemoverCombo']['Combo']]
for idx, freq in enumerate(self.engine.chopper_system.default_frequencies):
cb[idx].setCurrentIndex([i for i in range(cb[idx].count()) if str(freq) in cb[idx].itemText(i)][0])
if idx > 1:
break
self.tabs.setTabEnabled(self.qetabID, False)
if self.engine.has_detector and hasattr(self.engine.detector, 'tthlims'):
self.tabs.setTabEnabled(self.qetabID, True)
def setChopper(self, choppername):
"""
Defines the Fermi chopper slit package type by name, or the disk chopper arrangement variant.
"""
self.engine.setChopper(str(choppername))
self.engine.setFrequency(float(self.widgets['FrequencyCombo']['Combo'].currentText()))
# Special case for MERLIN - only enable multirep for 'G' chopper
if 'MERLIN' in self.engine.instname:
if 'G' in str(choppername):
self.widgets['MultiRepCheck'].setEnabled(True)
self.tabs.setTabEnabled(self.tdtabID, True)
self.widgets['Chopper2Phase']['Edit'].setText('1500')
self.widgets['Chopper2Phase']['Label'].setText('Disk chopper phase delay time')
if self.instSciAct.isChecked():
self.widgets['Chopper2Phase']['Edit'].show()
self.widgets['Chopper2Phase']['Label'].show()
else:
self.widgets['MultiRepCheck'].setEnabled(False)
self.widgets['MultiRepCheck'].setChecked(False)
self.tabs.setTabEnabled(self.tdtabID, False)
self.widgets['Chopper2Phase']['Edit'].hide()
self.widgets['Chopper2Phase']['Label'].hide()
def setFreq(self, freqtext=None, **kwargs):
"""
Sets the chopper frequency(ies), in Hz.
"""
freq_gui = float(self.widgets['FrequencyCombo']['Combo'].currentText())
freq_in = kwargs['manual_freq'] if ('manual_freq' in kwargs.keys()) else freq_gui
if len(self.engine.getFrequency()) > 1 and (not hasattr(freq_in, '__len__') or len(freq_in)==1):
freqpr = float(self.widgets['PulseRemoverCombo']['Combo'].currentText())
freq_in = [freq_in, freqpr]
if not self.widgets['Chopper2Phase']['Label'].isHidden():
chop2phase = self.widgets['Chopper2Phase']['Edit'].text()
if isinstance(self.engine.chopper_system.defaultPhase[0], string_types):
chop2phase = str(chop2phase)
else:
chop2phase = float(chop2phase) % (1e6 / self.engine.moderator.source_rep)
self.engine.setFrequency(freq_in, phase=chop2phase)
else:
self.engine.setFrequency(freq_in)
def setEi(self):
"""
Sets the incident energy (or focused incident energy for multi-rep case).
"""
try:
eitxt = float(self.widgets['EiEdit']['Edit'].text())
self.engine.setEi(eitxt)
if self.eiPlots.isChecked():
self.calc_callback()
except ValueError:
raise ValueError('No Ei specified, or Ei string not understood')
def calc_callback(self):
"""
Calls routines to calculate the resolution / flux and to update the Matplotlib graphs.
"""
try:
if self.engine.getChopper() is None:
self.setChopper(self.widgets['ChopperCombo']['Combo'].currentText())
self.setEi()
self.setFreq()
self.calculate()
if self.errormess:
idx = [i for i, ei in enumerate(self.eis) if np.abs(ei - self.engine.getEi()) < 1.e-4]
if idx and self.flux[idx[0]] == 0:
raise ValueError(self.errormess)
self.errormessage(self.errormess)
self.plot_res()
self.plot_frame()
if self.instSciAct.isChecked():
self.update_script()
except ValueError as err:
self.errormessage(err)
self.plot_flux_ei()
self.plot_flux_hz()
def calculate(self):
"""
Performs the resolution and flux calculations.
"""
self.errormess = None
if self.engine.getEi() is None:
self.setEi()
if self.widgets['MultiRepCheck'].isChecked():
en = np.linspace(0, 0.95, 200)
self.eis = self.engine.getAllowedEi()
with warnings.catch_warnings(record=True) as w:
warnings.simplefilter('always', UserWarning)
self.res = self.engine.getMultiRepResolution(en)
self.flux = self.engine.getMultiRepFlux()
if len(w) > 0:
mess = [str(w[i].message) for i in range(len(w))]
self.errormess = '\n'.join([m for m in mess if 'tchop' in m])
else:
en = np.linspace(0, 0.95*self.engine.getEi(), 200)
with warnings.catch_warnings(record=True) as w:
warnings.simplefilter('always', UserWarning)
self.res = self.engine.getResolution(en)
self.flux = self.engine.getFlux()
if len(w) > 0:
raise ValueError(w[0].message)
def _set_overplot(self, overplot, axisname):
axis = getattr(self, axisname)
if overplot:
if matplotlib.compare_versions('2.1.0',matplotlib.__version__):
axis.hold(True)
else:
setattr(self, axisname+'_xlim', 0)
axis.clear()
axis.axhline(color='k')
def plot_res(self):
"""
Plots the resolution in the resolution tab
"""
overplot = self.widgets['HoldCheck'].isChecked()
multiplot = self.widgets['MultiRepCheck'].isChecked()
self._set_overplot(overplot, 'resaxes')
self._set_overplot(overplot, 'qeaxes')
inst = self.engine.instname
freq = self.engine.getFrequency()
if hasattr(freq, '__len__'):
freq = freq[0]
if multiplot:
if matplotlib.compare_versions('2.1.0',matplotlib.__version__):
self.resaxes.hold(True)
for ie, Ei in enumerate(self.eis):
en = np.linspace(0, 0.95*Ei, 200)
if any(self.res[ie]):
if not self.flux[ie]:
continue
line, = self.resaxes.plot(en, self.res[ie])
label_text = '%s_%3.2fmeV_%dHz_Flux=%fn/cm2/s' % (inst, Ei, freq, self.flux[ie])
line.set_label(label_text)
if self.tabs.isTabEnabled(self.qetabID):
self.plot_qe(Ei, label_text, hold=True)
self.resaxes_xlim = max(Ei, self.resaxes_xlim)
if matplotlib.compare_versions('2.1.0',matplotlib.__version__):
self.resaxes.hold(False)
else:
ei = self.engine.getEi()
en = np.linspace(0, 0.95*ei, 200)
line, = self.resaxes.plot(en, self.res)
chopper = self.engine.getChopper()
label_text = '%s_%s_%3.2fmeV_%dHz_Flux=%fn/cm2/s' % (inst, chopper, ei, freq, self.flux)
line.set_label(label_text)
if self.tabs.isTabEnabled(self.qetabID):
self.plot_qe(ei, label_text, overplot)
self.resaxes_xlim = max(ei, self.resaxes_xlim)
self.resaxes.set_xlim([0, self.resaxes_xlim])
self.resaxes.legend().draggable()
self.resaxes.set_xlabel('Energy Transfer (meV)')
self.resaxes.set_ylabel(r'$\Delta$E (meV FWHM)')
self.rescanvas.draw()
def plot_qe(self, Ei, label_text, hold=False):
""" Plots the Q-E diagram """
from scipy import constants
E2q, meV2J = (2. * constants.m_n / (constants.hbar ** 2), constants.e / 1000.)
en = np.linspace(-Ei / 5., Ei, 100)
q2 = []
for tth in self.engine.detector.tthlims:
q = np.sqrt(E2q * (2 * Ei - en - 2 * np.sqrt(Ei * (Ei - en)) * np.cos(np.deg2rad(tth))) * meV2J) / 1e10
q2.append(np.concatenate((np.flipud(q), q)))
self._set_overplot(hold, 'qeaxes')
self.qeaxes_xlim = max(np.max(q2), self.qeaxes_xlim)
line, = self.qeaxes.plot(np.hstack(q2), np.concatenate((np.flipud(en), en)).tolist() * len(self.engine.detector.tthlims))
line.set_label(label_text)
self.qeaxes.set_xlim([0, self.qeaxes_xlim])
self.qeaxes.legend().draggable()
self.qeaxes.set_xlabel(r'$|Q| (\mathrm{\AA}^{-1})$')
self.qeaxes.set_ylabel('Energy Transfer (meV)')
self.qecanvas.draw()
def plot_flux_ei(self, **kwargs):
"""
Plots the flux vs Ei in the middle tab
"""
inst = self.engine.instname
chop = self.engine.getChopper()
freq = self.engine.getFrequency()
overplot = self.widgets['HoldCheck'].isChecked()
if hasattr(freq, '__len__'):
freq = freq[0]
update = kwargs['update'] if 'update' in kwargs.keys() else False
# Do not recalculate if all relevant parameters still the same.
_, labels = self.flxaxes2.get_legend_handles_labels()
searchStr = '([A-Z]+) "(.+)" ([0-9]+) Hz'
tmpinst = []
if (labels and (overplot or len(labels) == 1)) or update:
for prevtitle in labels:
prevInst, prevChop, prevFreq = re.search(searchStr, prevtitle).groups()
if update:
tmpinst.append(copy.deepcopy(Instrument(self.instruments[prevInst], prevChop, float(prevFreq))))
else:
if inst == prevInst and chop == prevChop and freq == float(prevFreq):
return
ne = 25
mn = self.minE[inst]
mx = (self.flxslder.val/100)*self.maxE[inst]
eis = np.linspace(mn, mx, ne)
flux = eis*0
elres = eis*0
if update:
self.flxaxes1.clear()
self.flxaxes2.clear()
if matplotlib.compare_versions('2.1.0',matplotlib.__version__):
self.flxaxes1.hold(True)
self.flxaxes2.hold(True)
for ii, instrument in enumerate(tmpinst):
for ie, ei in enumerate(eis):
with warnings.catch_warnings(record=True):
warnings.simplefilter('always', UserWarning)
flux[ie] = instrument.getFlux(ei)
elres[ie] = instrument.getResolution(0., ei)[0]
self.flxaxes1.plot(eis, flux)
line, = self.flxaxes2.plot(eis, elres)
line.set_label(labels[ii])
else:
for ie, ei in enumerate(eis):
with warnings.catch_warnings(record=True):
warnings.simplefilter('always', UserWarning)
flux[ie] = self.engine.getFlux(ei)
elres[ie] = self.engine.getResolution(0., ei)[0]
if overplot:
if matplotlib.compare_versions('2.1.0',matplotlib.__version__):
self.flxaxes1.hold(True)
self.flxaxes2.hold(True)
else:
self.flxaxes1.clear()
self.flxaxes2.clear()
self.flxaxes1.plot(eis, flux)
line, = self.flxaxes2.plot(eis, elres)
line.set_label('%s "%s" %d Hz' % (inst, chop, freq))
self.flxaxes1.set_xlim([mn, mx])
self.flxaxes2.set_xlim([mn, mx])
self.flxaxes1.set_xlabel('Incident Energy (meV)')
self.flxaxes1.set_ylabel('Flux (n/cm$^2$/s)')
self.flxaxes1.set_xlabel('Incident Energy (meV)')
self.flxaxes2.set_ylabel('Elastic Resolution FWHM (meV)')
lg = self.flxaxes2.legend()
lg.draggable()
self.flxcanvas.draw()
def update_slider(self, val=None):
"""
Callback function for the x-axis slider of the flux tab
"""
if val is None:
val = float(self.flxedt.text()) / self.maxE[self.engine.instname] * 100
if val < self.minE[self.engine.instname]:
self.errormessage("Max Ei must be greater than %2.1f" % (self.minE[self.engine.instname]))
val = (self.minE[self.engine.instname]+0.1) / self.maxE[self.engine.instname] * 100
self.flxslder.set_val(val)
else:
val = self.flxslder.val * self.maxE[self.engine.instname] / 100
self.flxedt.setText('%3.2f' % (val))
self.plot_flux_ei(update=True)
self.flxcanvas.draw()
def plot_flux_hz(self):
"""
Plots the flux vs freq in the middle tab
"""
inst = self.engine.instname
chop = self.engine.getChopper()
ei = float(self.widgets['EiEdit']['Edit'].text())
overplot = self.widgets['HoldCheck'].isChecked()
# Do not recalculate if one of the plots has the same parametersc
_, labels = self.frqaxes2.get_legend_handles_labels()
searchStr = '([A-Z]+) "(.+)" Ei = ([0-9.-]+) meV'
if labels and (overplot or len(labels) == 1):
for prevtitle in labels:
prevInst, prevChop, prevEi = re.search(searchStr, prevtitle).groups()
if inst == prevInst and chop == prevChop and abs(ei-float(prevEi)) < 0.01:
return
freq0 = self.engine.getFrequency()
rep = self.engine.moderator.source_rep
maxfreq = self.engine.chopper_system.max_frequencies
freqs = range(rep, (maxfreq[0] if hasattr(maxfreq, '__len__') else maxfreq) + 1, rep)
flux = np.zeros(len(freqs))
elres = np.zeros(len(freqs))
for ie, freq in enumerate(freqs):
if hasattr(freq0, '__len__'):
self.setFreq(manual_freq=[freq] + freq0[1:])
else:
self.setFreq(manual_freq=freq)
with warnings.catch_warnings(record=True):
warnings.simplefilter('always', UserWarning)
flux[ie] = self.engine.getFlux(ei)
elres[ie] = self.engine.getResolution(0., ei)[0]
if overplot:
if matplotlib.compare_versions('2.1.0',matplotlib.__version__):
self.frqaxes1.hold(True)
self.frqaxes2.hold(True)
else:
self.frqaxes1.clear()
self.frqaxes2.clear()
self.setFreq(manual_freq=freq0)
self.frqaxes1.set_xlabel('Chopper Frequency (Hz)')
self.frqaxes1.set_ylabel('Flux (n/cm$^2$/s)')
line, = self.frqaxes1.plot(freqs, flux, 'o-')
self.frqaxes1.set_xlim([0, np.max(freqs)])
self.frqaxes2.set_xlabel('Chopper Frequency (Hz)')
self.frqaxes2.set_ylabel('Elastic Resolution FWHM (meV)')
line, = self.frqaxes2.plot(freqs, elres, 'o-')
line.set_label('%s "%s" Ei = %5.3f meV' % (inst, chop, ei))
lg = self.frqaxes2.legend()
lg.draggable()
self.frqaxes2.set_xlim([0, np.max(freqs)])
self.frqcanvas.draw()
def instSciCB(self):
"""
Callback function for the "Instrument Scientist Mode" menu option
"""
# MERLIN is a special case - want to hide ability to change phase from users
if 'MERLIN' in self.engine.instname and 'G' in self.engine.getChopper():
if self.instSciAct.isChecked():
self.widgets['Chopper2Phase']['Edit'].show()
self.widgets['Chopper2Phase']['Label'].show()
self.widgets['Chopper2Phase']['Edit'].setText('1500')
self.widgets['Chopper2Phase']['Label'].setText('Disk chopper phase delay time')
else:
self.widgets['Chopper2Phase']['Edit'].hide()
self.widgets['Chopper2Phase']['Label'].hide()
if self.instSciAct.isChecked():
self.tabs.insertTab(self.scrtabID, self.scrtab, 'ScriptOutput')
self.scrtab.show()
else:
self.tabs.removeTab(self.scrtabID)
self.scrtab.hide()
def errormessage(self, message):
msg = QMessageBox()
msg.setText(str(message))
msg.setStandardButtons(QMessageBox.Ok)
msg.exec_()
def loadYaml(self):
yaml_file = QFileDialog().getOpenFileName(self.mainWidget, 'Open Instrument YAML File', self.folder, 'Files (*.yaml)')
if isinstance(yaml_file, tuple):
yaml_file = yaml_file[0]
yaml_file = str(yaml_file)
new_folder = os.path.dirname(yaml_file)
if new_folder != self.folder:
self.folder = new_folder
try:
new_inst = Instrument(yaml_file)
except (RuntimeError, AttributeError, ValueError) as err:
self.errormessage(err)
newname = new_inst.name
if newname in self.instruments.keys() and not self.overwriteload.isChecked():
overwrite, newname = self._ask_overwrite()
if overwrite == 1:
return
elif overwrite == 0:
newname = new_inst.name
self.instruments[newname] = new_inst
self.choppers[newname] = new_inst.getChopperNames()
self.minE[newname] = max([new_inst.emin, 0.01])
self.maxE[newname] = new_inst.emax
self.updateInstrumentList()
combo = self.widgets['InstrumentCombo']['Combo']
idx = [i for i in range(combo.count()) if str(combo.itemText(i)) == newname]
combo.setCurrentIndex(idx[0])
self.setInstrument(newname)
def _ask_overwrite(self):
msg = QDialog()
msg.setWindowTitle('Load overwrite')
layout = QGridLayout()
layout.addWidget(QLabel('Instrument %s already exists in memory. Overwrite this?'), 0, 0, 1, -1)
buttons = [QPushButton(label) for label in ['Load and overwrite', 'Cancel Load', 'Load and rename to']]
locations = [[1, 0], [1, 1], [2, 0]]
self.overwrite_flag = 1
def overwriteCB(idx):
self.overwrite_flag = idx
msg.accept()
for idx, button in enumerate(buttons):
button.clicked.connect(lambda _, idx=idx: overwriteCB(idx))
layout.addWidget(button, locations[idx][0], locations[idx][1])
newname = QLineEdit()
newname.editingFinished.connect(lambda: overwriteCB(2))
layout.addWidget(newname, 2, 1)
msg.setLayout(layout)
msg.exec_()
newname = str(newname.text())
if not newname or newname in self.instruments:
self.errormessage('Invalid instrument name. Cancelling load.')
self.overwrite_flag = 1
return self.overwrite_flag, newname
def updateInstrumentList(self):
combo = self.widgets['InstrumentCombo']['Combo']
old_instruments = [str(combo.itemText(i)) for i in range(combo.count())]
new_instruments = [inst for inst in self.instruments if inst not in old_instruments]
for inst in new_instruments:
combo.addItem(inst)
def plot_frame(self):
"""
Plots the distance-time diagram in the right tab
"""
if len(self.engine.chopper_system.choppers) > 1:
self.engine.n_frame = int(self.repfig_nframe_edit.text())
self.repaxes.clear()
self.engine.plotMultiRepFrame(self.repaxes, first_rep=self.repfig_nframe_rep1only.isChecked())
self.repcanvas.draw()
def _gen_text_ei(self, ei, obj_in):
obj = Instrument(obj_in)
obj.setEi(ei)
en = np.linspace(0, 0.95*ei, 10)
try:
flux = self.engine.getFlux()
res = self.engine.getResolution(en)
except ValueError as err:
self.errormessage(err)
raise ValueError(err)
tsqvan, tsqdic, tsqmodchop = obj.getVanVar()
v_mod, v_chop = tuple(np.sqrt(tsqmodchop[:2]) * 1e6)
x0, _, x1, x2, _ = obj.chopper_system.getDistances()
first_component = 'moderator'
if x0 != tsqmodchop[2]:
x0 = tsqmodchop[2]
first_component = 'chopper 1'
txt = '# ------------------------------------------------------------- #\n'
txt += '# Ei = %8.2f meV\n' % (ei)
txt += '# Flux = %8.2f n/cm2/s\n' % (flux)
txt += '# Elastic resolution = %6.2f meV\n' % (res[0])
txt += '# Time width at sample = %6.2f us, of which:\n' % (1e6*np.sqrt(tsqvan))
for ky, val in list(tsqdic.items()):
txt += '# %20s : %6.2f us\n' % (ky, 1e6*np.sqrt(val))
txt += '# %s distances:\n' % (obj.instname)
txt += '# x0 = %6.2f m (%s to Fermi)\n' % (x0, first_component)
txt += '# x1 = %6.2f m (Fermi to sample)\n' % (x1)
txt += '# x2 = %6.2f m (sample to detector)\n' % (x2)
txt += '# Approximate inelastic resolution is given by:\n'
txt += '# dE = 2 * E2V * sqrt(ef**3 * t_van**2) / x2\n'
txt += '# where: E2V = 4.373e-4 meV/(m/us) conversion from energy to speed\n'
txt += '# t_van**2 = (geom*t_mod)**2 + ((1+geom)*t_chop)**2\n'
txt += '# geom = (x1 + x2*(ei/ef)**1.5) / x0\n'
txt += '# and t_mod and t_chop are the moderator and chopper time widths at the\n'
txt += '# moderator and chopper positions (not at the sample as listed above).\n'
txt += '# Which in this case is:\n'
txt += '# %.4e*sqrt(ef**3 * ( (%6.5f*(%.3f+%.3f*(ei/ef)**1.5))**2 \n' % (874.78672e-6/x2, v_mod, x1/x0, x2/x0)
txt += '# + (%6.5f*(%.3f+%.3f*(ei/ef)**1.5))**2) )\n' % (v_chop, 1+x1/x0, x2/x0)
txt += '# EN (meV) Full dE (meV) Approx dE (meV)\n'
for ii in range(len(res)):
ef = ei-en[ii]
approx = (874.78672e-6/x2)*np.sqrt(ef**3 * ((v_mod*((x1/x0)+(x2/x0)*(ei/ef)**1.5))**2
+ (v_chop*(1+(x1/x0)+(x2/x0)*(ei/ef)**1.5))**2))
txt += '%12.5f %12.5f %12.5f\n' % (en[ii], res[ii], approx)
return txt
def genText(self):
"""
Generates text output of the resolution function versus energy transfer and other information.
"""
multiplot = self.widgets['MultiRepCheck'].isChecked()
obj = self.engine
if obj.getChopper() is None:
self.setChopper(self.widgets['ChopperCombo']['Combo'].currentText())
if obj.getEi() is None:
self.setEi()
instname, chtyp, freqs, ei_in = tuple([obj.instname, obj.getChopper(), obj.getFrequency(), obj.getEi()])
txt = '# ------------------------------------------------------------- #\n'
txt += '# Chop calculation for instrument %s\n' % (instname)
if obj.isFermi:
txt += '# with chopper %s at %3i Hz\n' % (chtyp, freqs[0])
else:
txt += '# in %s mode with:\n' % (chtyp)
freq_names = obj.chopper_system.frequency_names
for idx in range(len(freq_names)):
txt += '# %s at %3i Hz\n' % (freq_names[idx], freqs[idx])
txt += self._gen_text_ei(ei_in, obj)
if multiplot:
for ei in sorted(self.engine.getAllowedEi()):
if np.abs(ei - ei_in) > 0.001:
txt += self._gen_text_ei(ei, obj)
return txt
def showText(self):
"""
Creates a dialog to show the generated text output.
"""
try:
generatedText = self.genText()
except ValueError:
return
self.txtwin = QDialog()
self.txtedt = QTextEdit()
self.txtbtn = QPushButton('OK')
self.txtwin.layout = QVBoxLayout(self.txtwin)
self.txtwin.layout.addWidget(self.txtedt)
self.txtwin.layout.addWidget(self.txtbtn)
self.txtbtn.clicked.connect(self.txtwin.deleteLater)
self.txtedt.setText(generatedText)
self.txtedt.setReadOnly(True)
self.txtwin.setWindowTitle('Resolution information')
self.txtwin.setWindowModality(Qt.ApplicationModal)
self.txtwin.setAttribute(Qt.WA_DeleteOnClose)
self.txtwin.setMinimumSize(400, 600)
self.txtwin.resize(400, 600)
self.txtwin.show()
self.txtloop = QEventLoop()
self.txtloop.exec_()
def saveText(self):
"""
Saves the generated text to a file (opens file dialog).
"""
fname = QFileDialog.getSaveFileName(self, 'Open file', '')
if isinstance(fname, tuple):
fname = fname[0]
fid = open(fname, 'w')
fid.write(self.genText())
fid.close()
def update_script(self):
"""
Updates the text window with information about the previous calculation.
"""
if self.widgets['MultiRepCheck'].isChecked():
out = self.engine.getMultiWidths()
new_str = '\n'
for ie, ee in enumerate(out['Eis']):
res = out['Energy'][ie]
percent = res / ee * 100
chop_width = out['chopper'][ie]
mod_width = out['moderator'][ie]
new_str += 'Ei is %6.2f meV, resolution is %6.2f ueV, percentage resolution is %6.3f\n' % (ee, res * 1000, percent)
new_str += 'FWHM at sample from chopper and moderator are %6.2f us, %6.2f us\n' % (chop_width, mod_width)
else:
ei = self.engine.getEi()
out = self.engine.getWidths()
res = out['Energy']
percent = res / ei * 100
chop_width = out['chopper']
mod_width = out['moderator']
new_str = '\nEi is %6.2f meV, resolution is %6.2f ueV, percentage resolution is %6.3f\n' % (ei, res * 1000, percent)
new_str += 'FWHM at sample from chopper and moderator are %6.2f us, %6.2f us\n' % (chop_width, mod_width)
self.scredt.append(new_str)
def onHelp(self):
"""
Shows the help page
"""
try:
from pymantidplot.proxies import showCustomInterfaceHelp
showCustomInterfaceHelp("PyChop")
except ImportError:
helpTxt = "PyChop is a tool to allow direct inelastic neutron\nscattering users to estimate the inelastic resolution\n"
helpTxt += "and incident flux for a given spectrometer setting.\n\nFirst select the instrument, chopper settings and\n"
helpTxt += "Ei, and then click 'Calculate and Plot'. Data for all\nthe graphs will be generated (may take 1-2s) and\n"
helpTxt += "all graphs will be updated. If the 'Hold current plot'\ncheck box is ticked, additional settings will be\n"
helpTxt += "overplotted on the existing graphs if they are\ndifferent from previous settings.\n\nMore in-depth help "
helpTxt += "can be obtained from the\nMantid help pages."
self.hlpwin = QDialog()
self.hlpedt = QLabel(helpTxt)
self.hlpbtn = QPushButton('OK')
self.hlpwin.layout = QVBoxLayout(self.hlpwin)
self.hlpwin.layout.addWidget(self.hlpedt)
self.hlpwin.layout.addWidget(self.hlpbtn)
self.hlpbtn.clicked.connect(self.hlpwin.deleteLater)
self.hlpwin.setWindowTitle('Help')
self.hlpwin.setWindowModality(Qt.ApplicationModal)
self.hlpwin.setAttribute(Qt.WA_DeleteOnClose)
self.hlpwin.setMinimumSize(370, 300)
self.hlpwin.resize(370, 300)
self.hlpwin.show()
self.hlploop = QEventLoop()
self.hlploop.exec_()
def drawLayout(self):
"""
Draws the GUI layout.
"""
self.widgetslist = [
['pair', 'show', 'Instrument', 'combo', self.instruments, self.setInstrument, 'InstrumentCombo'],
['pair', 'show', 'Chopper', 'combo', '', self.setChopper, 'ChopperCombo'],
['pair', 'show', 'Frequency', 'combo', '', self.setFreq, 'FrequencyCombo'],
['pair', 'hide', 'Pulse remover chopper freq', 'combo', '', self.setFreq, 'PulseRemoverCombo'],
['pair', 'show', 'Ei', 'edit', '', self.setEi, 'EiEdit'],
['pair', 'hide', 'Chopper 2 phase delay time', 'edit', '5', self.setFreq, 'Chopper2Phase'],
['spacer'],
['single', 'show', 'Calculate and Plot', 'button', self.calc_callback, 'CalculateButton'],
['single', 'show', 'Hold current plot', 'check', lambda: None, 'HoldCheck'],
['single', 'show', 'Show multi-reps', 'check', lambda: None, 'MultiRepCheck'],
['spacer'],
['single', 'show', 'Show data ascii window', 'button', self.showText, 'ShowAsciiButton'],
['single', 'show', 'Save data as ascii', 'button', self.saveText, 'SaveAsciiButton']
]
self.droplabels = []
self.dropboxes = []
self.singles = []
self.widgets = {}
self.leftPanel = QVBoxLayout()
self.rightPanel = QVBoxLayout()
self.tabs = QTabWidget(self)
self.fullWindow = QGridLayout()
for widget in self.widgetslist:
if 'pair' in widget[0]:
self.droplabels.append(QLabel(widget[2]))
if 'combo' in widget[3]:
self.dropboxes.append(QComboBox(self))
self.dropboxes[-1].activated['QString'].connect(widget[5])
for item in widget[4]:
self.dropboxes[-1].addItem(item)
self.widgets[widget[-1]] = {'Combo':self.dropboxes[-1], 'Label':self.droplabels[-1]}
elif 'edit' in widget[3]:
self.dropboxes.append(QLineEdit(self))
self.dropboxes[-1].returnPressed.connect(widget[5])
self.widgets[widget[-1]] = {'Edit':self.dropboxes[-1], 'Label':self.droplabels[-1]}
else:
raise RuntimeError('Bug in code - widget %s is not recognised.' % (widget[3]))
self.leftPanel.addWidget(self.droplabels[-1])
self.leftPanel.addWidget(self.dropboxes[-1])
if 'hide' in widget[1]:
self.droplabels[-1].hide()
self.dropboxes[-1].hide()
elif 'single' in widget[0]:
if 'check' in widget[3]:
self.singles.append(QCheckBox(widget[2], self))
self.singles[-1].stateChanged.connect(widget[4])
elif 'button' in widget[3]:
self.singles.append(QPushButton(widget[2]))
self.singles[-1].clicked.connect(widget[4])
else:
raise RuntimeError('Bug in code - widget %s is not recognised.' % (widget[3]))
self.leftPanel.addWidget(self.singles[-1])
if 'hide' in widget[1]:
self.singles[-1].hide()
self.widgets[widget[-1]] = self.singles[-1]
elif 'spacer' in widget[0]:
self.leftPanel.addItem(QSpacerItem(0, 35))
else:
raise RuntimeError('Bug in code - widget class %s is not recognised.' % (widget[0]))
# Right panel, matplotlib figures
self.resfig = Figure()
self.resfig.patch.set_facecolor('white')
self.rescanvas = FigureCanvas(self.resfig)
self.resaxes = self.resfig.add_subplot(111)
self.resaxes.axhline(color='k')
self.resaxes.set_xlabel('Energy Transfer (meV)')
self.resaxes.set_ylabel(r'$\Delta$E (meV FWHM)')
self.resfig_controls = NavigationToolbar(self.rescanvas, self)
self.restab = QWidget(self.tabs)
self.restabbox = QVBoxLayout()
self.restabbox.addWidget(self.rescanvas)
self.restabbox.addWidget(self.resfig_controls)
self.restab.setLayout(self.restabbox)
self.flxfig = Figure()
self.flxfig.patch.set_facecolor('white')
self.flxcanvas = FigureCanvas(self.flxfig)
self.flxaxes1 = self.flxfig.add_subplot(121)
self.flxaxes1.set_xlabel('Incident Energy (meV)')
self.flxaxes1.set_ylabel('Flux (n/cm$^2$/s)')
self.flxaxes2 = self.flxfig.add_subplot(122)
self.flxaxes2.set_xlabel('Incident Energy (meV)')
self.flxaxes2.set_ylabel('Elastic Resolution FWHM (meV)')
self.flxfig_controls = NavigationToolbar(self.flxcanvas, self)
self.flxsldfg = Figure()
self.flxsldfg.patch.set_facecolor('white')
self.flxsldcv = FigureCanvas(self.flxsldfg)
self.flxsldax = self.flxsldfg.add_subplot(111)
self.flxslder = Slider(self.flxsldax, 'Ei (meV)', 0, 100, valinit=100)
self.flxslder.valtext.set_visible(False)
self.flxslder.on_changed(self.update_slider)
self.flxedt = QLineEdit()
self.flxedt.setText('1000')
self.flxedt.returnPressed.connect(self.update_slider)
self.flxtab = QWidget(self.tabs)
self.flxsldbox = QHBoxLayout()
self.flxsldbox.addWidget(self.flxsldcv)
self.flxsldbox.addWidget(self.flxedt)
self.flxsldwdg = QWidget()
self.flxsldwdg.setLayout(self.flxsldbox)
sz = self.flxsldwdg.maximumSize()
sz.setHeight(50)
self.flxsldwdg.setMaximumSize(sz)
self.flxtabbox = QVBoxLayout()
self.flxtabbox.addWidget(self.flxcanvas)
self.flxtabbox.addWidget(self.flxsldwdg)
self.flxtabbox.addWidget(self.flxfig_controls)
self.flxtab.setLayout(self.flxtabbox)
self.frqfig = Figure()
self.frqfig.patch.set_facecolor('white')
self.frqcanvas = FigureCanvas(self.frqfig)
self.frqaxes1 = self.frqfig.add_subplot(121)
self.frqaxes1.set_xlabel('Chopper Frequency (Hz)')
self.frqaxes1.set_ylabel('Flux (n/cm$^2$/s)')
self.frqaxes2 = self.frqfig.add_subplot(122)
self.frqaxes1.set_xlabel('Chopper Frequency (Hz)')
self.frqaxes2.set_ylabel('Elastic Resolution FWHM (meV)')
self.frqfig_controls = NavigationToolbar(self.frqcanvas, self)
self.frqtab = QWidget(self.tabs)
self.frqtabbox = QVBoxLayout()
self.frqtabbox.addWidget(self.frqcanvas)
self.frqtabbox.addWidget(self.frqfig_controls)
self.frqtab.setLayout(self.frqtabbox)
self.repfig = Figure()
self.repfig.patch.set_facecolor('white')
self.repcanvas = FigureCanvas(self.repfig)
self.repaxes = self.repfig.add_subplot(111)
self.repaxes.axhline(color='k')
self.repaxes.set_xlabel(r'TOF ($\mu$sec)')
self.repaxes.set_ylabel('Distance (m)')
self.repfig_controls = NavigationToolbar(self.repcanvas, self)
self.repfig_nframe_label = QLabel('Number of frames to plot')
self.repfig_nframe_edit = QLineEdit('1')
self.repfig_nframe_button = QPushButton('Replot')
self.repfig_nframe_button.clicked.connect(lambda: self.plot_frame())
self.repfig_nframe_rep1only = QCheckBox('First Rep Only')
self.repfig_nframe_box = QHBoxLayout()
self.repfig_nframe_box.addWidget(self.repfig_nframe_label)
self.repfig_nframe_box.addWidget(self.repfig_nframe_edit)
self.repfig_nframe_box.addWidget(self.repfig_nframe_button)
self.repfig_nframe_box.addWidget(self.repfig_nframe_rep1only)
self.reptab = QWidget(self.tabs)
self.repfig_nframe = QWidget(self.reptab)
self.repfig_nframe.setLayout(self.repfig_nframe_box)
self.repfig_nframe.setSizePolicy(QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Fixed))
self.reptabbox = QVBoxLayout()
self.reptabbox.addWidget(self.repcanvas)
self.reptabbox.addWidget(self.repfig_nframe)
self.reptabbox.addWidget(self.repfig_controls)
self.reptab.setLayout(self.reptabbox)
self.qefig = Figure()
self.qefig.patch.set_facecolor('white')
self.qecanvas = FigureCanvas(self.qefig)
self.qeaxes = self.qefig.add_subplot(111)
self.qeaxes.axhline(color='k')
self.qeaxes.set_xlabel(r'$|Q| (\mathrm{\AA}^{-1})$')
self.qeaxes.set_ylabel('Energy Transfer (meV)')
self.qefig_controls = NavigationToolbar(self.qecanvas, self)
self.qetabbox = QVBoxLayout()
self.qetabbox.addWidget(self.qecanvas)
self.qetabbox.addWidget(self.qefig_controls)
self.qetab = QWidget(self.tabs)
self.qetab.setLayout(self.qetabbox)
self.scrtab = QWidget(self.tabs)
self.scredt = QTextEdit()
self.scrcls = QPushButton("Clear")
self.scrcls.clicked.connect(lambda: self.scredt.clear())
self.scrbox = QVBoxLayout()
self.scrbox.addWidget(self.scredt)
self.scrbox.addWidget(self.scrcls)
self.scrtab.setLayout(self.scrbox)
self.scrtab.hide()
self.tabs.addTab(self.restab, 'Resolution')
self.tabs.addTab(self.flxtab, 'Flux-Ei')
self.tabs.addTab(self.frqtab, 'Flux-Freq')
self.tabs.addTab(self.reptab, 'Time-Distance')
self.tdtabID = 3
self.tabs.setTabEnabled(self.tdtabID, False)
self.tabs.addTab(self.qetab, 'Q-E')
self.qetabID = 4
self.tabs.setTabEnabled(self.qetabID, False)
self.scrtabID = 5
self.rightPanel.addWidget(self.tabs)
self.menuLoad = QMenu('Load')
self.loadAct = QAction('Load YAML', self.menuLoad)
self.loadAct.triggered.connect(self.loadYaml)
self.menuLoad.addAction(self.loadAct)
self.menuOptions = QMenu('Options')
self.instSciAct = QAction('Instrument Scientist Mode', self.menuOptions, checkable=True)
self.instSciAct.triggered.connect(self.instSciCB)
self.menuOptions.addAction(self.instSciAct)
self.eiPlots = QAction('Press Enter in Ei box updates plots', self.menuOptions, checkable=True)
self.menuOptions.addAction(self.eiPlots)
self.overwriteload = QAction('Always overwrite instruments in memory', self.menuOptions, checkable=True)
self.menuOptions.addAction(self.overwriteload)
self.menuBar().addMenu(self.menuLoad)
self.menuBar().addMenu(self.menuOptions)
self.leftPanelWidget = QWidget()
self.leftPanelWidget.setLayout(self.leftPanel)
self.leftPanelWidget.setSizePolicy(QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Preferred))
self.fullWindow.addWidget(self.leftPanelWidget, 0, 0)
self.fullWindow.addLayout(self.rightPanel, 0, 1)
self.helpbtn = QPushButton("?", self)
self.helpbtn.setMaximumWidth(30)
self.helpbtn.clicked.connect(self.onHelp)
self.fullWindow.addWidget(self.helpbtn, 1, 0, 1, -1)
self.mainWidget = QWidget()
self.mainWidget.setLayout(self.fullWindow)
self.setCentralWidget(self.mainWidget)
self.setWindowTitle('PyChopGUI')
self.show()
class InternalShell(PythonShellWidget):
"""Shell base widget: link between PythonShellWidget and Interpreter"""
status = Signal(str)
refresh = Signal()
go_to_error = Signal(str)
focus_changed = Signal()
def __init__(self,
parent=None,
namespace=None,
commands=[],
message=None,
max_line_count=300,
font=None,
exitfunc=None,
profile=False,
multithreaded=True,
light_background=True):
PythonShellWidget.__init__(self, parent,
get_conf_path('history_internal.py'),
profile)
self.set_light_background(light_background)
self.multithreaded = multithreaded
self.setMaximumBlockCount(max_line_count)
if font is not None:
self.set_font(font)
# Allow raw_input support:
self.input_loop = None
self.input_mode = False
# KeyboardInterrupt support
self.interrupted = False # used only for not-multithreaded mode
self.sig_keyboard_interrupt.connect(self.keyboard_interrupt)
# Code completion / calltips
getcfg = lambda option: CONF.get('internal_console', option)
case_sensitive = getcfg('codecompletion/case_sensitive')
self.set_codecompletion_case(case_sensitive)
# keyboard events management
self.eventqueue = []
# Init interpreter
self.exitfunc = exitfunc
self.commands = commands
self.message = message
self.interpreter = None
self.start_interpreter(namespace)
# Clear status bar
self.status.emit('')
# Embedded shell -- requires the monitor (which installs the
# 'open_in_spyder' function in builtins)
if hasattr(builtins, 'open_in_spyder'):
self.go_to_error.connect(self.open_with_external_spyder)
#------ Interpreter
def start_interpreter(self, namespace):
"""Start Python interpreter"""
self.clear()
if self.interpreter is not None:
self.interpreter.closing()
self.interpreter = Interpreter(namespace, self.exitfunc, SysOutput,
WidgetProxy, DEBUG)
self.interpreter.stdout_write.data_avail.connect(self.stdout_avail)
self.interpreter.stderr_write.data_avail.connect(self.stderr_avail)
self.interpreter.widget_proxy.sig_set_readonly.connect(
self.setReadOnly)
self.interpreter.widget_proxy.sig_new_prompt.connect(self.new_prompt)
self.interpreter.widget_proxy.sig_edit.connect(self.edit_script)
self.interpreter.widget_proxy.sig_wait_input.connect(self.wait_input)
if self.multithreaded:
self.interpreter.start()
# Interpreter banner
banner = create_banner(self.message)
self.write(banner, prompt=True)
# Initial commands
for cmd in self.commands:
self.run_command(cmd, history=False, new_prompt=False)
# First prompt
self.new_prompt(self.interpreter.p1)
self.refresh.emit()
return self.interpreter
def exit_interpreter(self):
"""Exit interpreter"""
self.interpreter.exit_flag = True
if self.multithreaded:
self.interpreter.stdin_write.write(to_binary_string('\n'))
self.interpreter.restore_stds()
def edit_script(self, filename, external_editor):
filename = to_text_string(filename)
if external_editor:
self.external_editor(filename)
else:
self.parent().edit_script(filename)
def stdout_avail(self):
"""Data is available in stdout, let's empty the queue and write it!"""
data = self.interpreter.stdout_write.empty_queue()
if data:
self.write(data)
def stderr_avail(self):
"""Data is available in stderr, let's empty the queue and write it!"""
data = self.interpreter.stderr_write.empty_queue()
if data:
self.write(data, error=True)
self.flush(error=True)
#------Raw input support
def wait_input(self, prompt=''):
"""Wait for input (raw_input support)"""
self.new_prompt(prompt)
self.setFocus()
self.input_mode = True
self.input_loop = QEventLoop()
self.input_loop.exec_()
self.input_loop = None
def end_input(self, cmd):
"""End of wait_input mode"""
self.input_mode = False
self.input_loop.exit()
self.interpreter.widget_proxy.end_input(cmd)
#----- Menus, actions, ...
def setup_context_menu(self):
"""Reimplement PythonShellWidget method"""
PythonShellWidget.setup_context_menu(self)
self.help_action = create_action(self,
_("Help..."),
icon=ima.icon('DialogHelpButton'),
triggered=self.help)
self.menu.addAction(self.help_action)
@Slot()
def help(self):
"""Help on Spyder console"""
QMessageBox.about(
self, _("Help"), """<b>%s</b>
<p><i>%s</i><br> edit foobar.py
<p><i>%s</i><br> xedit foobar.py
<p><i>%s</i><br> run foobar.py
<p><i>%s</i><br> clear x, y
<p><i>%s</i><br> !ls
<p><i>%s</i><br> object?
<p><i>%s</i><br> result = oedit(object)
""" %
(_('Shell special commands:'), _('Internal editor:'),
_('External editor:'), _('Run script:'), _('Remove references:'),
_('System commands:'), _('Python help:'), _('GUI-based editor:')))
#------ External editing
def open_with_external_spyder(self, text):
"""Load file in external Spyder's editor, if available
This method is used only for embedded consoles
(could also be useful if we ever implement the magic %edit command)"""
match = get_error_match(to_text_string(text))
if match:
fname, lnb = match.groups()
builtins.open_in_spyder(fname, int(lnb))
def external_editor(self, filename, goto=-1):
"""Edit in an external editor
Recommended: SciTE (e.g. to go to line where an error did occur)"""
editor_path = CONF.get('internal_console', 'external_editor/path')
goto_option = CONF.get('internal_console', 'external_editor/gotoline')
try:
args = [filename]
if goto > 0 and goto_option:
args.append('%s%d'.format(goto_option, goto))
programs.run_program(editor_path, args)
except OSError:
self.write_error("External editor was not found:"
" %s\n" % editor_path)
#------ I/O
def flush(self, error=False, prompt=False):
"""Reimplement ShellBaseWidget method"""
PythonShellWidget.flush(self, error=error, prompt=prompt)
if self.interrupted:
self.interrupted = False
raise KeyboardInterrupt
#------ Clear terminal
def clear_terminal(self):
"""Reimplement ShellBaseWidget method"""
self.clear()
self.new_prompt(self.interpreter.p2 if self.interpreter.more else self.
interpreter.p1)
#------ Keyboard events
def on_enter(self, command):
"""on_enter"""
if self.profile:
# Simple profiling test
t0 = time()
for _ in range(10):
self.execute_command(command)
self.insert_text(u"\n<Δt>=%dms\n" % (1e2 * (time() - t0)))
self.new_prompt(self.interpreter.p1)
else:
self.execute_command(command)
self.__flush_eventqueue()
def keyPressEvent(self, event):
"""
Reimplement Qt Method
Enhanced keypress event handler
"""
if self.preprocess_keyevent(event):
# Event was accepted in self.preprocess_keyevent
return
self.postprocess_keyevent(event)
def __flush_eventqueue(self):
"""Flush keyboard event queue"""
while self.eventqueue:
past_event = self.eventqueue.pop(0)
self.postprocess_keyevent(past_event)
#------ Command execution
def keyboard_interrupt(self):
"""Simulate keyboard interrupt"""
if self.multithreaded:
self.interpreter.raise_keyboard_interrupt()
else:
if self.interpreter.more:
self.write_error("\nKeyboardInterrupt\n")
self.interpreter.more = False
self.new_prompt(self.interpreter.p1)
self.interpreter.resetbuffer()
else:
self.interrupted = True
def execute_lines(self, lines):
"""
Execute a set of lines as multiple command
lines: multiple lines of text to be executed as single commands
"""
for line in lines.splitlines():
stripped_line = line.strip()
if stripped_line.startswith('#'):
continue
self.write(line + os.linesep, flush=True)
self.execute_command(line + "\n")
self.flush()
def execute_command(self, cmd):
"""
Execute a command
cmd: one-line command only, with '\n' at the end
"""
if self.input_mode:
self.end_input(cmd)
return
if cmd.endswith('\n'):
cmd = cmd[:-1]
# cls command
if cmd == 'cls':
self.clear_terminal()
return
self.run_command(cmd)
def run_command(self, cmd, history=True, new_prompt=True):
"""Run command in interpreter"""
if not cmd:
cmd = ''
else:
if history:
self.add_to_history(cmd)
self.interpreter.stdin_write.write(to_binary_string(cmd + '\n'))
if not self.multithreaded:
self.interpreter.run_line()
self.refresh.emit()
#------ Code completion / Calltips
def _eval(self, text):
"""Is text a valid object?"""
return self.interpreter.eval(text)
def get_dir(self, objtxt):
"""Return dir(object)"""
obj, valid = self._eval(objtxt)
if valid:
return getobjdir(obj)
def get_globals_keys(self):
"""Return shell globals() keys"""
return list(self.interpreter.namespace.keys())
def get_cdlistdir(self):
"""Return shell current directory list dir"""
return os.listdir(getcwd_or_home())
def iscallable(self, objtxt):
"""Is object callable?"""
obj, valid = self._eval(objtxt)
if valid:
return callable(obj)
def get_arglist(self, objtxt):
"""Get func/method argument list"""
obj, valid = self._eval(objtxt)
if valid:
return getargtxt(obj)
def get__doc__(self, objtxt):
"""Get object __doc__"""
obj, valid = self._eval(objtxt)
if valid:
return obj.__doc__
def get_doc(self, objtxt):
"""Get object documentation dictionary"""
obj, valid = self._eval(objtxt)
if valid:
return getdoc(obj)
def get_source(self, objtxt):
"""Get object source"""
obj, valid = self._eval(objtxt)
if valid:
return getsource(obj)
def is_defined(self, objtxt, force_import=False):
"""Return True if object is defined"""
return self.interpreter.is_defined(objtxt, force_import)
class InternalShell(PythonShellWidget):
"""Shell base widget: link between PythonShellWidget and Interpreter"""
status = Signal(str)
refresh = Signal()
go_to_error = Signal(str)
focus_changed = Signal()
def __init__(self, parent=None, namespace=None, commands=[], message=None,
max_line_count=300, font=None, exitfunc=None, profile=False,
multithreaded=True, light_background=True):
PythonShellWidget.__init__(self, parent,
get_conf_path('history_internal.py'),
profile)
self.set_light_background(light_background)
self.multithreaded = multithreaded
self.setMaximumBlockCount(max_line_count)
if font is not None:
self.set_font(font)
# Allow raw_input support:
self.input_loop = None
self.input_mode = False
# KeyboardInterrupt support
self.interrupted = False # used only for not-multithreaded mode
self.sig_keyboard_interrupt.connect(self.keyboard_interrupt)
# Code completion / calltips
getcfg = lambda option: CONF.get('internal_console', option)
case_sensitive = getcfg('codecompletion/case_sensitive')
self.set_codecompletion_case(case_sensitive)
# keyboard events management
self.eventqueue = []
# Init interpreter
self.exitfunc = exitfunc
self.commands = commands
self.message = message
self.interpreter = None
self.start_interpreter(namespace)
# Clear status bar
self.status.emit('')
# Embedded shell -- requires the monitor (which installs the
# 'open_in_spyder' function in builtins)
if hasattr(builtins, 'open_in_spyder'):
self.go_to_error.connect(self.open_with_external_spyder)
#------ Interpreter
def start_interpreter(self, namespace):
"""Start Python interpreter"""
self.clear()
if self.interpreter is not None:
self.interpreter.closing()
self.interpreter = Interpreter(namespace, self.exitfunc,
SysOutput, WidgetProxy,
get_debug_level())
self.interpreter.stdout_write.data_avail.connect(self.stdout_avail)
self.interpreter.stderr_write.data_avail.connect(self.stderr_avail)
self.interpreter.widget_proxy.sig_set_readonly.connect(self.setReadOnly)
self.interpreter.widget_proxy.sig_new_prompt.connect(self.new_prompt)
self.interpreter.widget_proxy.sig_edit.connect(self.edit_script)
self.interpreter.widget_proxy.sig_wait_input.connect(self.wait_input)
if self.multithreaded:
self.interpreter.start()
# Interpreter banner
banner = create_banner(self.message)
self.write(banner, prompt=True)
# Initial commands
for cmd in self.commands:
self.run_command(cmd, history=False, new_prompt=False)
# First prompt
self.new_prompt(self.interpreter.p1)
self.refresh.emit()
return self.interpreter
def exit_interpreter(self):
"""Exit interpreter"""
self.interpreter.exit_flag = True
if self.multithreaded:
self.interpreter.stdin_write.write(to_binary_string('\n'))
self.interpreter.restore_stds()
def edit_script(self, filename, external_editor):
filename = to_text_string(filename)
if external_editor:
self.external_editor(filename)
else:
self.parent().edit_script(filename)
def stdout_avail(self):
"""Data is available in stdout, let's empty the queue and write it!"""
data = self.interpreter.stdout_write.empty_queue()
if data:
self.write(data)
def stderr_avail(self):
"""Data is available in stderr, let's empty the queue and write it!"""
data = self.interpreter.stderr_write.empty_queue()
if data:
self.write(data, error=True)
self.flush(error=True)
#------Raw input support
def wait_input(self, prompt=''):
"""Wait for input (raw_input support)"""
self.new_prompt(prompt)
self.setFocus()
self.input_mode = True
self.input_loop = QEventLoop()
self.input_loop.exec_()
self.input_loop = None
def end_input(self, cmd):
"""End of wait_input mode"""
self.input_mode = False
self.input_loop.exit()
self.interpreter.widget_proxy.end_input(cmd)
#----- Menus, actions, ...
def setup_context_menu(self):
"""Reimplement PythonShellWidget method"""
PythonShellWidget.setup_context_menu(self)
self.help_action = create_action(self, _("Help..."),
icon=ima.icon('DialogHelpButton'),
triggered=self.help)
self.menu.addAction(self.help_action)
@Slot()
def help(self):
"""Help on Spyder console"""
QMessageBox.about(self, _("Help"),
"""<b>%s</b>
<p><i>%s</i><br> edit foobar.py
<p><i>%s</i><br> xedit foobar.py
<p><i>%s</i><br> run foobar.py
<p><i>%s</i><br> clear x, y
<p><i>%s</i><br> !ls
<p><i>%s</i><br> object?
<p><i>%s</i><br> result = oedit(object)
""" % (_('Shell special commands:'),
_('Internal editor:'),
_('External editor:'),
_('Run script:'),
_('Remove references:'),
_('System commands:'),
_('Python help:'),
_('GUI-based editor:')))
#------ External editing
def open_with_external_spyder(self, text):
"""Load file in external Spyder's editor, if available
This method is used only for embedded consoles
(could also be useful if we ever implement the magic %edit command)"""
match = get_error_match(to_text_string(text))
if match:
fname, lnb = match.groups()
builtins.open_in_spyder(fname, int(lnb))
def external_editor(self, filename, goto=-1):
"""Edit in an external editor
Recommended: SciTE (e.g. to go to line where an error did occur)"""
editor_path = CONF.get('internal_console', 'external_editor/path')
goto_option = CONF.get('internal_console', 'external_editor/gotoline')
try:
args = [filename]
if goto > 0 and goto_option:
args.append('%s%d'.format(goto_option, goto))
programs.run_program(editor_path, args)
except OSError:
self.write_error("External editor was not found:"
" %s\n" % editor_path)
#------ I/O
def flush(self, error=False, prompt=False):
"""Reimplement ShellBaseWidget method"""
PythonShellWidget.flush(self, error=error, prompt=prompt)
if self.interrupted:
self.interrupted = False
raise KeyboardInterrupt
#------ Clear terminal
def clear_terminal(self):
"""Reimplement ShellBaseWidget method"""
self.clear()
self.new_prompt(self.interpreter.p2 if self.interpreter.more else self.interpreter.p1)
#------ Keyboard events
def on_enter(self, command):
"""on_enter"""
if self.profile:
# Simple profiling test
t0 = time()
for _ in range(10):
self.execute_command(command)
self.insert_text(u"\n<Δt>=%dms\n" % (1e2*(time()-t0)))
self.new_prompt(self.interpreter.p1)
else:
self.execute_command(command)
self.__flush_eventqueue()
def keyPressEvent(self, event):
"""
Reimplement Qt Method
Enhanced keypress event handler
"""
if self.preprocess_keyevent(event):
# Event was accepted in self.preprocess_keyevent
return
self.postprocess_keyevent(event)
def __flush_eventqueue(self):
"""Flush keyboard event queue"""
while self.eventqueue:
past_event = self.eventqueue.pop(0)
self.postprocess_keyevent(past_event)
#------ Command execution
def keyboard_interrupt(self):
"""Simulate keyboard interrupt"""
if self.multithreaded:
self.interpreter.raise_keyboard_interrupt()
else:
if self.interpreter.more:
self.write_error("\nKeyboardInterrupt\n")
self.interpreter.more = False
self.new_prompt(self.interpreter.p1)
self.interpreter.resetbuffer()
else:
self.interrupted = True
def execute_lines(self, lines):
"""
Execute a set of lines as multiple command
lines: multiple lines of text to be executed as single commands
"""
for line in lines.splitlines():
stripped_line = line.strip()
if stripped_line.startswith('#'):
continue
self.write(line+os.linesep, flush=True)
self.execute_command(line+"\n")
self.flush()
def execute_command(self, cmd):
"""
Execute a command
cmd: one-line command only, with '\n' at the end
"""
if self.input_mode:
self.end_input(cmd)
return
if cmd.endswith('\n'):
cmd = cmd[:-1]
# cls command
if cmd == 'cls':
self.clear_terminal()
return
self.run_command(cmd)
def run_command(self, cmd, history=True, new_prompt=True):
"""Run command in interpreter"""
if not cmd:
cmd = ''
else:
if history:
self.add_to_history(cmd)
if not self.multithreaded:
if 'input' not in cmd:
self.interpreter.stdin_write.write(
to_binary_string(cmd + '\n'))
self.interpreter.run_line()
self.refresh.emit()
else:
self.write(_('In order to use commands like "raw_input" '
'or "input" run Spyder with the multithread '
'option (--multithread) from a system terminal'),
error=True)
else:
self.interpreter.stdin_write.write(to_binary_string(cmd + '\n'))
#------ Code completion / Calltips
def _eval(self, text):
"""Is text a valid object?"""
return self.interpreter.eval(text)
def get_dir(self, objtxt):
"""Return dir(object)"""
obj, valid = self._eval(objtxt)
if valid:
return getobjdir(obj)
def get_globals_keys(self):
"""Return shell globals() keys"""
return list(self.interpreter.namespace.keys())
def get_cdlistdir(self):
"""Return shell current directory list dir"""
return os.listdir(getcwd_or_home())
def iscallable(self, objtxt):
"""Is object callable?"""
obj, valid = self._eval(objtxt)
if valid:
return callable(obj)
def get_arglist(self, objtxt):
"""Get func/method argument list"""
obj, valid = self._eval(objtxt)
if valid:
return getargtxt(obj)
def get__doc__(self, objtxt):
"""Get object __doc__"""
obj, valid = self._eval(objtxt)
if valid:
return obj.__doc__
def get_doc(self, objtxt):
"""Get object documentation dictionary"""
obj, valid = self._eval(objtxt)
if valid:
return getdoc(obj)
def get_source(self, objtxt):
"""Get object source"""
obj, valid = self._eval(objtxt)
if valid:
return getsource(obj)
def is_defined(self, objtxt, force_import=False):
"""Return True if object is defined"""
return self.interpreter.is_defined(objtxt, force_import)
