def viewTime(projData: ProjectData, startDate: str, endDate: str,
**kwargs) -> Union[Figure, None]:
"""View timeseries in the project
Parameters
----------
projData : ProjectData
The project data instance
startDate : str
The start of the data range to plot
endDate : str
The end of the date range to plot
sites : List[str], optional
List of sites
sampleFreqs : List[float], optional
List of sample frequencies to plot
chans : List[str], optional
List of channels to plot
polreverse : Dict[str, bool]
Keys are channels and values are boolean flags for reversing
scale : Dict[str, float]
Keys are channels and values are floats to multiply the channel data by
calibrate : bool, optional
Boolean flag to calibrate data
normalise : bool, optional
Boolean flag to normalise the data. Default is False and setting to True will normalise each channel independently.
notch : List[float], optional
List of frequencies to notch out
filter : Dict, optional
Filter parameters
show : bool, optional
Boolean flag to show the plot
save : bool, optional
Boolean flag to save the plot to images folder
plotoptions : Dict
Dictionary of plot options
Returns
-------
matplotlib.pyplot.figure or None
A matplotlib figure unless the plot is not shown and is saved, in which case None and the figure is closed.
"""
from resistics.project.shortcuts import getCalibrator
from resistics.project.preprocess import (
applyPolarisationReversalOptions,
applyScaleOptions,
applyCalibrationOptions,
applyFilterOptions,
applyNormaliseOptions,
applyNotchOptions,
)
from resistics.common.plot import savePlot, plotOptionsTime
options = {}
options["sites"]: List[str] = projData.sites
options["sampleFreqs"]: Union[List[float],
List[str]] = projData.getSampleFreqs()
options["chans"]: List[str] = ["Ex", "Ey", "Hx", "Hy", "Hz"]
options["polreverse"]: Union[bool, Dict[str, bool]] = False
options["scale"]: Union[bool, Dict[str, float]] = False
options["calibrate"]: bool = False
options["normalise"]: bool = False
options["filter"]: Dict = {}
options["notch"]: List[float] = []
options["show"]: bool = True
options["save"]: bool = False
options["plotoptions"]: Dict = plotOptionsTime()
options = parseKeywords(options, kwargs)
# prepare calibrator
cal = getCalibrator(projData.calPath, projData.config)
if options["calibrate"]:
cal.printInfo()
# format startDate and endDate
start = datetime.strptime("{}.000".format(startDate),
"%Y-%m-%d %H:%M:%S.%f")
stop = datetime.strptime("{}.000".format(endDate), "%Y-%m-%d %H:%M:%S.%f")
# collect relevant data - dictionary to store timeData
timeDataAll = {}
for site in options["sites"]:
siteData = projData.getSiteData(site)
if isinstance(siteData, bool):
# site does not exist
continue
siteData.printInfo()
measurements = siteData.getMeasurements()
timeDataAll[site] = {}
# loop over measurements and save data for each one
for meas in measurements:
sampleFreq = siteData.getMeasurementSampleFreq(meas)
if sampleFreq not in options["sampleFreqs"]:
continue
# check if data contributes to user defined time period
siteStart = siteData.getMeasurementStart(meas)
siteStop = siteData.getMeasurementEnd(meas)
if siteStop < start or siteStart > stop:
continue
reader = siteData.getMeasurement(meas)
# get the samples of the datetimes
sampleStart, sampleStop = reader.time2sample(start, stop)
# as the samples returned from time2sample are rounded use sample2time to get the appropriate start and end times for those samples
readStart, readStop = reader.sample2time(sampleStart, sampleStop)
# get the data for any available channels meaning even those sites with missing channels can be plotted
timeData = reader.getPhysicalData(readStart, readStop)
projectText(
"Plotting measurement {} of site {} between {} and {}".format(
meas, site, readStart, readStop))
# apply various options
applyPolarisationReversalOptions(options, timeData)
applyScaleOptions(options, timeData)
applyCalibrationOptions(options, cal, timeData, reader)
applyFilterOptions(options, timeData)
applyNotchOptions(options, timeData)
applyNormaliseOptions(options, timeData)
timeDataAll[site][meas] = timeData
# plot all the data
plotfonts = options["plotoptions"]["plotfonts"]
fig = plt.figure(figsize=options["plotoptions"]["figsize"])
for site in timeDataAll:
for meas in timeDataAll[site]:
timeData = timeDataAll[site][meas]
timeData.view(
sampleStop=timeDataAll[site][meas].numSamples - 1,
fig=fig,
chans=options["chans"],
label="{} - {}".format(site, meas),
xlim=[start, stop],
plotfonts=plotfonts,
)
# add the suptitle
st = fig.suptitle(
"Time data from {} to {}".format(start.strftime("%Y-%m-%d %H-%M-%S"),
stop.strftime("%Y-%m-%d %H-%M-%S")),
fontsize=plotfonts["suptitle"],
)
st.set_y(0.98)
# do the axis labels
numChans = len(options["chans"])
for idx, chan in enumerate(options["chans"]):
plt.subplot(numChans, 1, idx + 1)
# do the yaxis
if isElectric(chan):
plt.ylabel("mV/km", fontsize=plotfonts["axisLabel"])
if len(options["plotoptions"]["Eylim"]) > 0:
plt.ylim(options["plotoptions"]["Eylim"])
else:
if options["calibrate"]:
plt.ylabel("nT", fontsize=plotfonts["axisLabel"])
else:
plt.ylabel("mV", fontsize=plotfonts["axisLabel"])
if len(options["plotoptions"]["Hylim"]) > 0:
plt.ylim(options["plotoptions"]["Hylim"])
plt.legend(loc=1, fontsize=plotfonts["legend"])
# plot format
fig.tight_layout(rect=[0, 0.02, 1, 0.96])
fig.subplots_adjust(top=0.92)
# plot show and save
if options["save"]:
impath = projData.imagePath
filename = "timeData_{}_{}".format(
start.strftime("%Y-%m-%d_%H-%M-%S_"),
stop.strftime("%Y-%m-%d_%H-%M-%S"))
savename = savePlot(impath, filename, fig)
projectText("Image saved to file {}".format(savename))
if options["show"]:
plt.show(block=options["plotoptions"]["block"])
if not options["show"] and options["save"]:
plt.close(fig)
return None
return fig
def viewSpectraSection(projData: ProjectData, site: str, meas: str,
**kwargs) -> Union[Figure, None]:
"""View spectra section for a measurement
Parameters
----------
projData : projecData
The project data
site : str
The site to view
meas: str
The measurement of the site to view
chans : List[str], optional
Channels to plot
declevel : int, optional
Decimation level to plot
specdir : str, optional
String that specifies spectra directory for the measurement
show : bool, optional
Show the spectra plot
save : bool, optional
Save the plot to the images directory
plotoptions : Dict, optional
Dictionary of plot options
Returns
-------
matplotlib.pyplot.figure or None
A matplotlib figure unless the plot is not shown and is saved, in which case None and the figure is closed. If no data was found, then None is returned.
"""
from matplotlib.colors import LogNorm
from resistics.common.plot import savePlot, plotOptionsSpec, colorbar2dSpectra
options = {}
options["chans"] = []
options["declevel"] = 0
options["specdir"] = projData.config.configParams["Spectra"]["specdir"]
options["show"] = True
options["save"] = False
options["plotoptions"] = plotOptionsSpec()
options = parseKeywords(options, kwargs)
projectText(
"Plotting spectra section for measurement {} and site {}".format(
meas, site))
specReader = getSpecReader(projData, site, meas, **options)
if specReader is None:
return None
# channels
dataChans = specReader.getChannels()
if len(options["chans"]) > 0:
dataChans = options["chans"]
# get windows
numWindows = specReader.getNumWindows()
sampleFreqDec = specReader.getSampleFreq()
f = specReader.getFrequencyArray()
# if plotting a section, ignore plotwindow
if numWindows > 250:
windows = list(
np.linspace(0, numWindows, 250, endpoint=False, dtype=np.int32))
else:
windows = np.arange(0, numWindows)
# create figure
plotfonts = options["plotoptions"]["plotfonts"]
fig = plt.figure(figsize=options["plotoptions"]["figsize"])
st = fig.suptitle(
"Spectra section, site = {}, meas = {}, fs = {:.2f} [Hz], decimation level = {:2d}, windows = {:d}, {} to {}"
.format(
site,
meas,
sampleFreqDec,
options["declevel"],
len(windows),
windows[0],
windows[-1],
),
fontsize=plotfonts["suptitle"],
)
st.set_y(0.98)
# collect the data
specData = np.empty(shape=(len(windows), len(dataChans),
specReader.getDataSize()),
dtype="complex")
dates = []
for idx, iW in enumerate(windows):
winData = specReader.readBinaryWindowLocal(iW)
for cIdx, chan in enumerate(dataChans):
specData[idx, cIdx, :] = winData.data[chan]
dates.append(winData.startTime)
ampLim = options["plotoptions"]["amplim"]
for idx, chan in enumerate(dataChans):
ax = plt.subplot(1, len(dataChans), idx + 1)
plotData = np.transpose(np.absolute(np.squeeze(specData[:, idx, :])))
if len(ampLim) == 2:
plt.pcolor(
dates,
f,
plotData,
norm=LogNorm(vmin=ampLim[0], vmax=ampLim[1]),
cmap=colorbar2dSpectra(),
)
else:
plt.pcolor(
dates,
f,
plotData,
norm=LogNorm(vmin=plotData.min(), vmax=plotData.max()),
cmap=colorbar2dSpectra(),
)
cb = plt.colorbar()
cb.ax.tick_params(labelsize=plotfonts["axisTicks"])
# set axis limits
ax.set_ylim(0, specReader.getSampleFreq() / 2.0)
ax.set_xlim([dates[0], dates[-1]])
if isMagnetic(chan):
plt.title("Amplitude {} [nT]".format(chan),
fontsize=plotfonts["title"])
else:
plt.title("Amplitude {} [mV/km]".format(chan),
fontsize=plotfonts["title"])
ax.set_ylabel("Frequency [Hz]", fontsize=plotfonts["axisLabel"])
ax.set_xlabel("Time", fontsize=plotfonts["axisLabel"])
# set tick sizes
for label in ax.get_xticklabels() + ax.get_yticklabels():
label.set_fontsize(plotfonts["axisTicks"])
plt.grid(True)
# plot format
fig.autofmt_xdate(rotation=90, ha="center")
fig.tight_layout(rect=[0.02, 0.02, 0.96, 0.92])
# plot show and save
if options["save"]:
impath = projData.imagePath
filename = "spectraSection_{}_{}_dec{}_{}".format(
site, meas, options["declevel"], options["specdir"])
savename = savePlot(impath, filename, fig)
projectText("Image saved to file {}".format(savename))
if options["show"]:
plt.show(block=options["plotoptions"]["block"])
if not options["show"] and options["save"]:
plt.close(fig)
return None
return fig
def viewSpectraStack(projData: ProjectData, site: str, meas: str,
**kwargs) -> Union[Figure, None]:
"""View spectra stacks for a measurement
Parameters
----------
projData : projecData
The project data
site : str
The site to view
meas: str
The measurement of the site to view
chans : List[str], optional
Channels to plot
declevel : int, optional
Decimation level to plot
numstacks : int, optional
The number of windows to stack
coherences : List[List[str]], optional
A list of coherences to add, specified as [["Ex", "Hy"], ["Ey", "Hx"]]
specdir : str, optional
String that specifies spectra directory for the measurement
show : bool, optional
Show the spectra plot
save : bool, optional
Save the plot to the images directory
plotoptions : Dict, optional
Dictionary of plot options
Returns
-------
matplotlib.pyplot.figure or None
A matplotlib figure unless the plot is not shown and is saved, in which case None and the figure is closed. If no data was found, then None is returned.
"""
from resistics.common.plot import savePlot, plotOptionsSpec, colorbarMultiline
options = {}
options["chans"] = []
options["declevel"] = 0
options["numstacks"] = 10
options["coherences"] = []
options["specdir"] = projData.config.configParams["Spectra"]["specdir"]
options["show"] = True
options["save"] = False
options["plotoptions"] = plotOptionsSpec()
options = parseKeywords(options, kwargs)
projectText("Plotting spectra stack for measurement {} and site {}".format(
meas, site))
specReader = getSpecReader(projData, site, meas, **options)
if specReader is None:
return None
# channels
dataChans = specReader.getChannels()
if len(options["chans"]) > 0:
dataChans = options["chans"]
numChans = len(dataChans)
# get windows
numWindows = specReader.getNumWindows()
sampleFreqDec = specReader.getSampleFreq()
f = specReader.getFrequencyArray()
# calculate num of windows to stack in each set
stackSize = int(np.floor(1.0 * numWindows / options["numstacks"]))
if stackSize == 0:
projectWarning("Too few windows for number of stacks {}".format(
options["numstacks"]))
options["numstacks"] = numWindows
stackSize = 1
projectWarning("Number of stacks changed to {}".format(
options["numstacks"]))
# calculate number of rows - in case interested in coherences too
nrows = (2 if len(options["coherences"]) == 0 else 2 +
np.ceil(1.0 * len(options["coherences"]) / numChans))
# setup the figure
plotfonts = options["plotoptions"]["plotfonts"]
cmap = colorbarMultiline()
fig = plt.figure(figsize=options["plotoptions"]["figsize"])
st = fig.suptitle(
"Spectra stack, fs = {:.6f} [Hz], decimation level = {:2d}, windows in each set = {:d}"
.format(sampleFreqDec, options["declevel"], stackSize),
fontsize=plotfonts["suptitle"],
)
st.set_y(0.98)
# do the stacking
for iP in range(0, options["numstacks"]):
stackStart = iP * stackSize
stackStop = min(stackStart + stackSize, numWindows)
color = cmap(iP / options["numstacks"])
# dictionaries to hold data for this section
stackedData = {}
ampData = {}
phaseData = {}
powerData = {}
# assign initial zeros
for c in dataChans:
stackedData[c] = np.zeros(shape=(specReader.getDataSize()),
dtype="complex")
ampData[c] = np.zeros(shape=(specReader.getDataSize()),
dtype="complex")
phaseData[c] = np.zeros(shape=(specReader.getDataSize()),
dtype="complex")
for c2 in dataChans:
powerData[c + c2] = np.zeros(shape=(specReader.getDataSize()),
dtype="complex")
# now stack the data and create nice plots
for iW in range(stackStart, stackStop):
winData = specReader.readBinaryWindowLocal(iW)
for c in dataChans:
stackedData[c] += winData.data[c]
ampData[c] += np.absolute(winData.data[c])
phaseData[c] += np.angle(winData.data[c]) * (180.0 / np.pi)
# get coherency data
for c2 in dataChans:
powerData[c + c2] += winData.data[c] * np.conjugate(
winData.data[c2])
if iW == stackStart:
startTime = winData.startTime
if iW == stackStop - 1:
stopTime = winData.stopTime
# scale powers and stacks
ampLim = options["plotoptions"]["amplim"]
for idx, c in enumerate(dataChans):
stackedData[c] = stackedData[c] / (stackStop - stackStart)
ampData[c] = ampData[c] / (stackStop - stackStart)
phaseData[c] = phaseData[c] / (stackStop - stackStart)
for c2 in dataChans:
# normalisation
powerData[c + c2] = 2 * powerData[c + c2] / (stackStop -
stackStart)
# normalisation
powerData[c + c2][[0, -1]] = powerData[c + c2][[0, -1]] / 2
# plot
ax1 = plt.subplot(nrows, numChans, idx + 1)
plt.title("Amplitude {}".format(c), fontsize=plotfonts["title"])
h = ax1.semilogy(
f,
ampData[c],
color=color,
label="{} to {}".format(
startTime.strftime("%m-%d %H:%M:%S"),
stopTime.strftime("%m-%d %H:%M:%S"),
),
)
if len(ampLim) == 2:
ax1.set_ylim(ampLim)
else:
ax1.set_ylim(0.01, 1000)
ax1.set_xlim(0, sampleFreqDec / 2.0)
if isMagnetic(c):
ax1.set_ylabel("Amplitude [nT]",
fontsize=plotfonts["axisLabel"])
else:
ax1.set_ylabel("Amplitude [mV/km]",
fontsize=plotfonts["axisLabel"])
ax1.set_xlabel("Frequency [Hz]", fontsize=plotfonts["axisLabel"])
plt.grid(True)
# set tick sizes
for label in ax1.get_xticklabels() + ax1.get_yticklabels():
label.set_fontsize(plotfonts["axisTicks"])
# plot phase
ax2 = plt.subplot(nrows, numChans, numChans + idx + 1)
plt.title("Phase {}".format(c), fontsize=plotfonts["title"])
ax2.plot(
f,
phaseData[c],
color=color,
label="{} to {}".format(
startTime.strftime("%m-%d %H:%M:%S"),
stopTime.strftime("%m-%d %H:%M:%S"),
),
)
ax2.set_ylim(-180, 180)
ax2.set_xlim(0, sampleFreqDec / 2.0)
ax2.set_ylabel("Phase [degrees]", fontsize=plotfonts["axisLabel"])
ax2.set_xlabel("Frequency [Hz]", fontsize=plotfonts["axisLabel"])
plt.grid(True)
# set tick sizes
for label in ax2.get_xticklabels() + ax2.get_yticklabels():
label.set_fontsize(plotfonts["axisTicks"])
# plot coherences
for idx, coh in enumerate(options["coherences"]):
c = coh[0]
c2 = coh[1]
cohNom = np.power(np.absolute(powerData[c + c2]), 2)
cohDenom = powerData[c + c] * powerData[c2 + c2]
coherence = cohNom / cohDenom
ax = plt.subplot(nrows, numChans, 2 * numChans + idx + 1)
plt.title("Coherence {} - {}".format(c, c2),
fontsize=plotfonts["title"])
ax.plot(
f,
coherence,
color=color,
label="{} to {}".format(
startTime.strftime("%m-%d %H:%M:%S"),
stopTime.strftime("%m-%d %H:%M:%S"),
),
)
ax.set_ylim(0, 1.1)
ax.set_xlim(0, sampleFreqDec / 2)
ax.set_ylabel("Coherence", fontsize=plotfonts["axisLabel"])
ax.set_xlabel("Frequency [Hz]", fontsize=plotfonts["axisLabel"])
plt.grid(True)
# set tick sizes
for label in ax.get_xticklabels() + ax.get_yticklabels():
label.set_fontsize(plotfonts["axisTicks"])
# fig legend and layout
ax = plt.gca()
h, l = ax.get_legend_handles_labels()
fig.tight_layout(rect=[0.01, 0.01, 0.98, 0.81])
# legend
legax = plt.axes(position=[0.01, 0.82, 0.98, 0.12], in_layout=False)
plt.tick_params(left=False,
labelleft=False,
bottom=False,
labelbottom=False)
plt.box(False)
legax.legend(h,
l,
ncol=4,
loc="upper center",
fontsize=plotfonts["legend"])
# plot show and save
if options["save"]:
impath = projData.imagePath
filename = "spectraStack_{}_{}_dec{}_{}".format(
site, meas, options["declevel"], options["specdir"])
savename = savePlot(impath, filename, fig)
projectText("Image saved to file {}".format(savename))
if options["show"]:
plt.show(block=options["plotoptions"]["block"])
if not options["show"] and options["save"]:
plt.close(fig)
return None
return fig
def viewSpectra(projData: ProjectData, site: str, meas: str,
**kwargs) -> Union[Figure, None]:
"""View spectra for a measurement
Parameters
----------
projData : projecData
The project data
site : str
The site to view
meas: str
The measurement of the site to view
chans : List[str], optional
Channels to plot
declevel : int, optional
Decimation level to plot
plotwindow : int, str, Dict, optional
Windows to plot (local). If int, the window with local index plotwindow will be plotted. If string and "all", all the windows will be plotted if there are less than 20 windows, otherwise 20 windows throughout the whole spectra dataset will be plotted. If a dictionary, needs to have start and stop to define a range.
specdir : str, optional
String that specifies spectra directory for the measurement
show : bool, optional
Show the spectra plot
save : bool, optional
Save the plot to the images directory
plotoptions : Dict, optional
Dictionary of plot options
Returns
-------
matplotlib.pyplot.figure or None
A matplotlib figure unless the plot is not shown and is saved, in which case None and the figure is closed. If no data was found, then None is returned.
"""
from resistics.common.plot import savePlot, plotOptionsSpec, colorbarMultiline
options = {}
options["chans"]: List[str] = []
options["declevel"]: int = 0
options["plotwindow"]: Union[int, Dict, str] = [0]
options["specdir"]: str = projData.config.configParams["Spectra"][
"specdir"]
options["show"]: bool = True
options["save"]: bool = False
options["plotoptions"]: Dict = plotOptionsSpec()
options = parseKeywords(options, kwargs)
projectText("Plotting spectra for measurement {} and site {}".format(
meas, site))
specReader = getSpecReader(projData, site, meas, **options)
if specReader is None:
return None
# channels
dataChans = specReader.getChannels()
if len(options["chans"]) > 0:
dataChans = options["chans"]
numChans = len(dataChans)
# get windows
numWindows = specReader.getNumWindows()
sampleFreqDec = specReader.getSampleFreq()
# get the window data
windows = options["plotwindow"]
if isinstance(windows, str) and windows == "all":
if numWindows > 20:
windows = list(
np.linspace(0, numWindows, 20, endpoint=False, dtype=np.int32))
else:
windows = list(np.arange(0, numWindows))
elif isinstance(windows, int):
windows = [windows] # if an integer, make it into a list
elif isinstance(windows, dict):
windows = list(np.arange(windows["start"], windows["stop"] + 1))
# create a figure
plotfonts = options["plotoptions"]["plotfonts"]
cmap = colorbarMultiline()
fig = plt.figure(figsize=options["plotoptions"]["figsize"])
for iW in windows:
if iW >= numWindows:
break
color = cmap(iW / numWindows)
winData = specReader.readBinaryWindowLocal(iW)
winData.view(
fig=fig,
chans=dataChans,
label="{} to {}".format(
winData.startTime.strftime("%m-%d %H:%M:%S"),
winData.stopTime.strftime("%m-%d %H:%M:%S"),
),
plotfonts=plotfonts,
color=color,
)
st = fig.suptitle(
"Spectra plot, site = {}, meas = {}, fs = {:.2f} [Hz], decimation level = {:2d}"
.format(site, meas, sampleFreqDec, options["declevel"]),
fontsize=plotfonts["suptitle"],
)
st.set_y(0.98)
# put on axis labels etc
for idx, chan in enumerate(dataChans):
ax = plt.subplot(numChans, 1, idx + 1)
plt.title("Amplitude {}".format(chan), fontsize=plotfonts["title"])
if len(options["plotoptions"]["amplim"]) == 2:
ax.set_ylim(options["plotoptions"]["amplim"])
ax.set_xlim(0, specReader.getSampleFreq() / 2.0)
plt.grid(True)
# fig legend and formatting
ax = plt.gca()
h, l = ax.get_legend_handles_labels()
fig.tight_layout(rect=[0.02, 0.02, 0.77, 0.92])
# legend axis
legax = plt.axes(position=[0.77, 0.02, 0.23, 0.88], in_layout=False)
plt.tick_params(left=False,
labelleft=False,
bottom=False,
labelbottom="False")
plt.box(False)
legax.legend(h, l, loc="upper left", fontsize=plotfonts["legend"])
# plot show and save
if options["save"]:
impath = projData.imagePath
filename = "spectraData_{}_{}_dec{}_{}".format(site, meas,
options["declevel"],
options["specdir"])
savename = savePlot(impath, filename, fig)
projectText("Image saved to file {}".format(savename))
if options["show"]:
plt.show(block=options["plotoptions"]["block"])
if not options["show"] and options["save"]:
plt.close(fig)
return None
return fig
def viewStatisticDensityplot(
projData: ProjectData,
site: str,
sampleFreq: Union[int, float],
stat: str,
crossplots: List[List[str]],
**kwargs
) -> Union[Figure, None]:
"""View statistic data as a density plot for a single sampling frequency of a site
Parameters
----------
projData : ProjectData
A project instance
site : str
The site for which to plot statistics
stat : str
The statistic to plot
sampleFreq : float
The sampling frequency for which to plot statistics
crossplots : List[List[str]]
The statistic element pairs to crossplot
declevel : int
The decimation level to plot
eFreqI : int
The evaluation frequency index
specdir : str
The spectra directory
maskname : str
Mask name
xlim : List, optional
Limits for the x axis
ylim : List, optional
Limits for the y axis
maxcols : int
The maximum number of columns in the plots
show : bool, optional
Show the spectra plot
save : bool, optional
Save the plot to the images directory
plotoptions : Dict, optional
Dictionary of plot options
Returns
-------
matplotlib.pyplot.figure or None
A matplotlib figure unless the plot is not shown and is saved, in which case None and the figure is closed. If no data was found, None.
"""
from resistics.common.plot import (
savePlot,
plotOptionsSpec,
getPlotRowsAndCols,
colorbar2dSpectra,
)
options = {}
options["declevel"] = 0
options["eFreqI"] = 0
options["specdir"] = projData.config.configParams["Spectra"]["specdir"]
options["maskname"] = ""
options["xlim"] = []
options["ylim"] = []
options["maxcols"] = 2
options["show"] = True
options["save"] = False
options["plotoptions"] = plotOptionsSpec()
options = parseKeywords(options, kwargs)
projectText(
"Plotting density plot for statistic {}, site {} and sampling frequency {}".format(
stat, site, sampleFreq
)
)
statData = getStatisticDataForSampleFreq(
projData,
site,
sampleFreq,
stat,
declevel=options["declevel"],
specdir=options["specdir"],
)
statMeas = list(statData.keys())
if len(statMeas) == 0:
projectWarning(
"No statistic files for site {}, sampling frequency {}, statistic {} and decimation level {}".format(
site, sampleFreq, stat, options["declevel"]
)
)
return None
# get the evaluation frequency
eFreq = statData[statMeas[0]].evalFreq[options["eFreqI"]]
# get the mask data
maskWindows = []
if options["maskname"] != "":
maskData = getMaskData(projData, site, options["maskname"], sampleFreq)
maskWindows = maskData.getMaskWindowsFreq(
options["declevel"], options["eFreqI"]
)
# plot information
nrows, ncols = getPlotRowsAndCols(options["maxcols"], len(crossplots))
plotfonts = options["plotoptions"]["plotfonts"]
fig = plt.figure(figsize=options["plotoptions"]["figsize"])
# suptitle
st = fig.suptitle(
"{} density plots for {}, sampling frequency {} Hz,\ndecimation level {} and evaluation frequency {} Hz".format(
stat, site, sampleFreq, options["declevel"], eFreq
),
fontsize=plotfonts["suptitle"],
)
st.set_y(0.98)
# now plot the data
for idx, cplot in enumerate(crossplots):
ax = plt.subplot(nrows, ncols, idx + 1)
plt.title("Crossplot {}".format(cplot), fontsize=plotfonts["title"])
plotAll1 = []
plotAll2 = []
for meas in statMeas:
stats = statData[meas].getStats(maskwindows=maskWindows)
plotI1 = statData[meas].winStats.index(cplot[0])
plotData1 = np.squeeze(stats[:, options["eFreqI"], plotI1])
plotI2 = statData[meas].winStats.index(cplot[1])
plotData2 = np.squeeze(stats[:, options["eFreqI"], plotI2])
# add to all data
if plotData1.size == 0:
continue
if plotData1.size == 1:
plotAll1 = plotAll1 + [float(plotData1)]
plotAll2 = plotAll2 + [float(plotData2)]
else:
plotAll1 = plotAll1 + plotData1.tolist()
plotAll2 = plotAll2 + plotData2.tolist()
plotAll1 = np.array(plotAll1)
plotAll2 = np.array(plotAll2)
nbins = 200
if len(options["xlim"]) > 0:
plt.xlim(options["xlim"])
rangex = options["xlim"]
else:
minx = np.percentile(plotAll1, 2)
maxx = np.percentile(plotAll1, 98)
ax.set_xlim(minx, maxx)
rangex = [minx, maxx]
if len(options["ylim"]) > 0:
plt.ylim(options["ylim"])
rangey = options["ylim"]
else:
miny = np.percentile(plotAll2, 2)
maxy = np.percentile(plotAll2, 98)
ax.set_ylim(miny, maxy)
rangey = [miny, maxy]
plt.hist2d(
plotAll1,
plotAll2,
bins=(nbins, nbins),
range=[rangex, rangey],
cmap=plt.cm.inferno,
)
# axis format
plt.xlabel(cplot[0], fontsize=plotfonts["axisLabel"])
plt.ylabel(cplot[1], fontsize=plotfonts["axisLabel"])
plt.grid(True)
# set tick sizes
for label in ax.get_xticklabels() + ax.get_yticklabels():
label.set_fontsize(plotfonts["axisTicks"])
# plot format, show and save
# fig.tight_layout(rect=[0.02, 0.02, 0.98, 0.92])
if options["save"]:
impath = projData.imagePath
sampleFreqStr = fileFormatSampleFreq(sampleFreq)
filename = "statDensityplot_{:s}_{:s}_{:s}_dec{:d}_efreq{:d}_{:s}".format(
stat,
site,
sampleFreqStr,
options["declevel"],
options["eFreqI"],
options["specdir"],
)
if options["maskname"] != "":
filename = "{}_{}".format(filename, options["maskname"])
savename = savePlot(impath, filename, fig)
projectText("Image saved to file {}".format(savename))
if options["show"]:
plt.show(block=options["plotoptions"]["block"])
if not options["show"] and options["save"]:
plt.close(fig)
return None
return fig
def viewStatisticHistogram(
projData: ProjectData, site: str, sampleFreq: float, stat: str, **kwargs
) -> Union[Figure, None]:
"""View statistic histograms for a single sampling frequency of a site
Parameters
----------
projData : ProjectData
A project instance
site : str
The site for which to plot statistics
stat : str
The statistic to plot
sampleFreq : float
The sampling frequency for which to plot statistics
declevel : int
The decimation level to plot
eFreqI : int
The evaluation frequency index
specdir : str
The spectra directory
maskname : str
Mask name
numbins : int
The number of bins for the histogram data binning
xlim : List, optional
Limits for the x axis
maxcols : int
The maximum number of columns in the plots
show : bool, optional
Show the spectra plot
save : bool, optional
Save the plot to the images directory
plotoptions : Dict, optional
Dictionary of plot options
Returns
-------
matplotlib.pyplot.figure or None
A matplotlib figure unless the plot is not shown and is saved, in which case None. If no data was found, None.
"""
from resistics.common.plot import savePlot, plotOptionsSpec, getPlotRowsAndCols
options = {}
options["declevel"] = 0
options["eFreqI"] = 0
options["specdir"] = projData.config.configParams["Spectra"]["specdir"]
options["maskname"] = ""
options["numbins"] = 40
options["xlim"] = []
options["maxcols"] = 4
options["show"] = True
options["save"] = False
options["plotoptions"] = plotOptionsSpec()
options = parseKeywords(options, kwargs)
projectText(
"Plotting histogram for statistic {}, site {} and sampling frequency {}".format(
stat, site, sampleFreq
)
)
statData = getStatisticDataForSampleFreq(
projData,
site,
sampleFreq,
stat,
declevel=options["declevel"],
specdir=options["specdir"],
)
statMeas = list(statData.keys())
if len(statMeas) == 0:
projectWarning(
"No statistic files for site {}, sampling frequency {}, statistic {} and decimation level {}".format(
site, sampleFreq, stat, options["declevel"]
)
)
return None
# get the statistic components
statComponents = statData[statMeas[0]].winStats
# get the evaluation frequency
eFreq = statData[statMeas[0]].evalFreq[options["eFreqI"]]
# get the mask data
maskWindows = []
if options["maskname"] != "":
maskData = getMaskData(projData, site, options["maskname"], sampleFreq)
maskWindows = maskData.getMaskWindowsFreq(
options["declevel"], options["eFreqI"]
)
# plot information
nrows, ncols = getPlotRowsAndCols(options["maxcols"], len(statComponents))
numbins = options["numbins"]
plotfonts = options["plotoptions"]["plotfonts"]
fig = plt.figure(figsize=options["plotoptions"]["figsize"])
# suptitle
st = fig.suptitle(
"{} histogram for {}, sampling frequency {} Hz, decimation level {} and evaluation frequency {} Hz".format(
stat, site, sampleFreq, options["declevel"], eFreq
),
fontsize=plotfonts["suptitle"],
)
st.set_y(0.98)
# now plot the data
for idx, val in enumerate(statComponents):
ax = plt.subplot(nrows, ncols, idx + 1)
plt.title("Histogram {}".format(val), fontsize=plotfonts["title"])
plotData = np.empty(shape=(0))
for meas in statMeas:
stats = statData[meas].getStats(maskwindows=maskWindows)
plotData = np.concatenate(
(plotData, np.squeeze(stats[:, options["eFreqI"], idx]))
)
# remove infinities and nans
plotData = plotData[np.isfinite(plotData)]
# x axis options
xlim = (
options["xlim"]
if len(options["xlim"]) > 0
else [np.min(plotData), np.max(plotData)]
)
plt.xlim(xlim)
plt.xlabel("Value", fontsize=plotfonts["axisLabel"])
# now plot with xlim in mind
plt.hist(plotData, numbins, range=xlim, facecolor="red", alpha=0.75)
plt.grid()
# y axis options
plt.ylabel("Count", fontsize=plotfonts["axisLabel"])
# set tick sizes
for label in ax.get_xticklabels() + ax.get_yticklabels():
label.set_fontsize(plotfonts["axisTicks"])
# plot format, show and save
fig.tight_layout(rect=[0.02, 0.02, 0.98, 0.92])
if options["save"]:
impath = projData.imagePath
sampleFreqStr = fileFormatSampleFreq(sampleFreq)
filename = "statHist_{:s}_{:s}_{:s}_dec{:d}_efreq{:d}_{:s}".format(
stat,
site,
sampleFreqStr,
options["declevel"],
options["eFreqI"],
options["specdir"],
)
if options["maskname"] != "":
filename = "{}_{}".format(filename, options["maskname"])
savename = savePlot(impath, filename, fig)
projectText("Image saved to file {}".format(savename))
if options["show"]:
plt.show(block=options["plotoptions"]["block"])
if not options["show"] and options["save"]:
plt.close(fig)
return None
return fig
def viewStatistic(
projData: ProjectData, site: str, sampleFreq: Union[int, float], stat: str, **kwargs
) -> Union[Figure, None]:
"""View statistic data for a single sampling frequency of a site
Parameters
----------
projData : ProjectData
A project instance
site : str
The site for which to plot statistics
stat : str
The statistic to plot
sampleFreq : float
The sampling frequency for which to plot statistics
declevel : int
The decimation level to plot
eFreqI : int
The evaluation frequency index
specdir : str
The spectra directory
maskname : str
Mask name
clim : List, optional
Limits for colourbar axis
xlim : List, optional
Limits for the x axis
ylim : List, optional
Limits for the y axis
colortitle : str, optional
Title for the colourbar
show : bool, optional
Show the spectra plot
save : bool, optional
Save the plot to the images directory
plotoptions : Dict, optional
Dictionary of plot options
Returns
-------
matplotlib.pyplot.figure or None
A matplotlib figure unless the plot is not shown and is saved, in which case None and the figure is closed. If no data was found, None.
"""
from resistics.common.plot import savePlot, plotOptionsSpec, getPlotRowsAndCols
options = {}
options["declevel"] = 0
options["eFreqI"] = 0
options["specdir"] = projData.config.configParams["Spectra"]["specdir"]
options["maskname"] = ""
options["clim"] = []
options["xlim"] = []
options["ylim"] = []
options["colortitle"] = ""
options["show"] = True
options["save"] = False
options["plotoptions"] = plotOptionsSpec()
options = parseKeywords(options, kwargs)
projectText(
"Plotting statistic {} for site {} and sampling frequency {}".format(
stat, site, sampleFreq
)
)
statData = getStatisticDataForSampleFreq(
projData,
site,
sampleFreq,
stat,
declevel=options["declevel"],
specdir=options["specdir"],
)
statMeas = list(statData.keys())
if len(statMeas) == 0:
projectWarning(
"No statistic files for site {}, sampling frequency {}, statistic {} and decimation level {}".format(
site, sampleFreq, stat, options["declevel"]
)
)
return None
# get the evaluation frequency
eFreq = statData[statMeas[0]].evalFreq[options["eFreqI"]]
# get the mask data
maskWindows = []
if options["maskname"] != "":
maskData = getMaskData(projData, site, options["maskname"], sampleFreq)
maskWindows = maskData.getMaskWindowsFreq(
options["declevel"], options["eFreqI"]
)
# setup the figure
plotfonts = options["plotoptions"]["plotfonts"]
fig = plt.figure(figsize=options["plotoptions"]["figsize"])
# get the date limits
siteData = projData.getSiteData(site)
if len(options["xlim"]) == 0:
start = siteData.getMeasurementStart(statMeas[0])
end = siteData.getMeasurementEnd(statMeas[0])
for meas in statMeas:
start = min(start, siteData.getMeasurementStart(meas))
end = max(end, siteData.getMeasurementEnd(meas))
options["xlim"] = [start, end]
# do the plots
for meas in statMeas:
statData[meas].view(
options["eFreqI"],
fig=fig,
xlim=options["xlim"],
ylim=options["ylim"],
clim=options["clim"],
label=meas,
plotfonts=options["plotoptions"]["plotfonts"],
maskwindows=maskWindows,
)
# add a legened
plt.legend(markerscale=4, fontsize=plotfonts["legend"])
# do the title after all the plots
fig.suptitle(
"{} values for {}, sampling frequency = {:.2f} Hz, decimation level = {} and evaluation frequency {} Hz".format(
stat, site, sampleFreq, options["declevel"], eFreq
),
fontsize=plotfonts["suptitle"],
)
# plot format, show and save
fig.tight_layout(rect=[0.02, 0.02, 0.98, 0.92])
if options["save"]:
impath = projData.imagePath
sampleFreqStr = fileFormatSampleFreq(sampleFreq)
filename = "stat_{:s}_{:s}_{:s}_dec{:d}_efreq{:d}_{:s}".format(
stat,
site,
sampleFreqStr,
options["declevel"],
options["eFreqI"],
options["specdir"],
)
if options["maskname"] != "":
filename = "{}_{}".format(filename, options["maskname"])
savename = savePlot(impath, filename, fig)
projectText("Image saved to file {}".format(savename))
if options["show"]:
plt.show(block=options["plotoptions"]["block"])
if not options["show"] and options["save"]:
plt.close(fig)
return None
return fig
def viewTipper(projData: ProjectData, **kwargs) -> List[Figure]:
"""View transfer function data
Parameters
----------
projData : projecData
The project data
sites : List[str], optional
List of sites to plot transfer functions for
sampleFreqs : List[float], optional
List of samples frequencies for which to plot transfer functions
specdir : str, optional
The spectra directories used
postpend : str, optional
The postpend on the transfer function files
cols : bool, optional
Boolean flag, True to arrange tipper plot as 1 row with 3 columns
show : bool, optional
Show the spectra plot
save : bool, optional
Save the plot to the images directory
plotoptions : Dict
A dictionary of plot options. For example, set the resistivity y limits using res_ylim, set the phase y limits using phase_ylim and set the xlimits using xlim
"""
from resistics.common.plot import (
savePlot,
plotOptionsTipper,
getTransferFunctionFigSize,
transferFunctionColours,
)
options = {}
options["sites"] = projData.getSites()
options["sampleFreqs"] = projData.getSampleFreqs()
options["specdir"] = projData.config.configParams["Spectra"]["specdir"]
options["postpend"] = ""
options["cols"] = True
options["save"] = False
options["show"] = True
options["plotoptions"] = plotOptionsTipper()
options = parseKeywords(options, kwargs)
# loop over sites
figs = []
for site in options["sites"]:
siteData = projData.getSiteData(site)
sampleFreqs = set(siteData.getSampleFreqs())
# find the intersection with the options["freqs"]
sampleFreqs = sampleFreqs.intersection(options["sampleFreqs"])
sampleFreqs = sorted(list(sampleFreqs))
# if prepend is a string, then make it a list
if isinstance(options["postpend"], str):
options["postpend"] = [options["postpend"]]
plotfonts = options["plotoptions"]["plotfonts"]
# now loop over the postpend options
for pp in options["postpend"]:
# add an underscore if not empty
postpend = "_{}".format(pp) if pp != "" else pp
fig = plt.figure(figsize=options["plotoptions"]["figsize"])
mks = ["o", "*", "d", "^", "h"]
lstyles = ["solid", "dashed", "dashdot", "dotted"]
# loop over sampling frequencies
includedFreqs = []
for idx, sampleFreq in enumerate(sampleFreqs):
tfData = getTransferFunctionData(projData,
site,
sampleFreq,
specdir=options["specdir"],
postpend=pp)
if not tfData:
continue
includedFreqs.append(sampleFreq)
projectText(
"Plotting tipper for site {}, sample frequency {}".format(
site, sampleFreq))
mk = mks[idx % len(mks)]
ls = lstyles[idx % len(lstyles)]
tfData.viewTipper(
fig=fig,
rows=options["cols"],
mk=mk,
ls=ls,
label="{}".format(sampleFreq),
xlim=options["plotoptions"]["xlim"],
length_ylim=options["plotoptions"]["length_ylim"],
angle_ylim=options["plotoptions"]["angle_ylim"],
plotfonts=options["plotoptions"]["plotfonts"],
)
# check if any files found
if len(includedFreqs) == 0:
continue
# sup title
sub = "Site {} tipper: {}".format(site,
options["specdir"] + postpend)
sub = "{}\nfs = {}".format(
sub, arrayToString(includedFreqs, decimals=3))
st = fig.suptitle(sub, fontsize=plotfonts["suptitle"])
st.set_y(0.99)
fig.tight_layout()
fig.subplots_adjust(top=0.85)
figs.append(fig)
if options["save"]:
impath = projData.imagePath
filename = "tipper_{}_{}{}".format(site, options["specdir"],
postpend)
savename = savePlot(impath, filename, fig)
projectText("Image saved to file {}".format(savename))
if not options["show"]:
plt.close("all")
else:
plt.show(block=options["plotoptions"]["block"])
return figs
