def find_starting_pixels(Iskel):
"""
Finds an endpoint pixel to begin walking to resolve network.
Parameters
----------
Iskel : np.array
Image of skeletonized mask.
Returns
-------
startpoints : list
Possible starting points for the walk.
"""
# Get skeleton connectivity
eps = imu.skel_endpoints(Iskel)
eps = set(np.ravel_multi_index(eps, Iskel.shape))
# Get one endpoint per connected component in network
rp, _ = imu.regionprops(Iskel, ['coords'])
startpoints = []
for ni in rp['coords']:
idcs = set(np.ravel_multi_index((ni[:, 0], ni[:, 1]), Iskel.shape))
# Find a valid endpoint for each connected component network
poss_id = idcs.intersection(eps)
if len(poss_id) > 0:
for pid in poss_id:
if check_startpoint(pid, Iskel) is True:
startpoints.append(pid)
break
return startpoints
def test_regionprops_big():
"""Bigger test of regionprops()."""
I = np.zeros((20, 20))
I[1:3, 1:3] = 1.0
I[15:20, 15:20] = 1.0
I[7:10, 4:12] = 1.0
props = ['centroid', 'mean', 'perim_len', 'eccentricity']
info, _ = im_utils.regionprops(I, props)
# make bunch of assertions
assert [*info] == props
assert np.all(
info['centroid'] == np.array([[1.5, 1.5], [8., 7.5], [17., 17.]]))
assert np.all(info['mean'] == np.array([1., 1., 1.]))
assert np.all(info['perim_len'] == np.array([4., 18., 16.]))
assert pytest.approx(
info['eccentricity'] == np.array([0., 0.93435318, 0.]))
def test_regionprops_small():
"""Small test of regionprops()."""
I = np.zeros((3, 3))
I[1, 1] = 1.0
props = [
'centroid', 'mean', 'perim_len', 'convex_area', 'eccentricity',
'equivalent_diameter', 'major_axis_length', 'minor_axis_length',
'invalidinput'
]
info, _ = im_utils.regionprops(I, props)
# make bunch of assertions
assert np.all(info['centroid'] == [1., 1.])
assert info['mean'] == 1.
assert info['perim_len'] == 0.
assert info['convex_area'] == 1
assert info['eccentricity'] == 0
assert info['equivalent_diameter'] == pytest.approx(1.12837917)
assert info['major_axis_length'] == 0.
assert info['minor_axis_length'] == 0.
def test_regionprops_perimeter():
"""Test of regionprops() 'perimeter' property."""
I = np.zeros((20, 20))
I[1:3, 1:3] = 1.0
I[15:20, 15:20] = 1.0
I[7:10, 4:12] = 1.0
props = ['perimeter']
info, _ = im_utils.regionprops(I, props)
# make bunch of assertions
assert [*info] == props
assert info['perimeter'].shape == (3, )
assert np.all(
info['perimeter'][0] == np.array([[1, 1], [2, 1], [2, 2], [1, 2]]))
assert np.all(info['perimeter'][1] ==
np.array([[7, 4], [8, 4], [9, 4], [9, 5], [9, 6], [9, 7],
[9, 8], [9, 9], [9, 10], [9, 11], [8, 11], [7, 11],
[7, 10], [7, 9], [7, 8], [7, 7], [7, 6], [7, 5]]))
assert np.all(info['perimeter'][2] == np.array(
[[15, 15], [16, 15], [17, 15], [18, 15], [19, 15], [19, 16], [19, 17],
[19, 18], [19, 19], [18, 19], [17, 19], [16, 19], [15, 19], [15, 18],
[15, 17], [15, 16]]))
def find_starting_pixels(Iskel):
"""
Finds an endpoint pixel to begin network resolution
"""
# Get skeleton connectivity
eps = iu.skel_endpoints(Iskel)
eps = set(np.ravel_multi_index(eps, Iskel.shape))
# Get one endpoint per connected component in network
rp = iu.regionprops(Iskel, ['coords'])
startpoints = []
for ni in rp['coords']:
idcs = set(np.ravel_multi_index((ni[:, 0], ni[:, 1]), Iskel.shape))
# Find a valid endpoint for each connected component network
poss_id = idcs.intersection(eps)
if len(poss_id) > 0:
for pid in poss_id:
if check_startpoint(pid, Iskel) is True:
startpoints.append(pid)
break
return startpoints
def get_island_properties(Imask,
pixlen,
pixarea,
crs,
gt,
props,
connectivity=2):
"""Get island properties."""
# maxwidth is an additional property
if 'maxwidth' in props:
props.remove('maxwidth')
do_maxwidth = True
else:
do_maxwidth = False
# Need perimeter to make island polygons
if 'perimeter' not in props:
props.append('perimeter')
# Pad by one pixel to help identify and remove the outer portion of
# the channel netowrk
Imaskpad = np.array(np.pad(Imask, 1, mode='constant'), dtype=bool)
Imp_invert = np.invert(Imaskpad)
rp_islands, Ilabeled = iu.regionprops(Imp_invert,
props=props,
connectivity=connectivity)
# Make polygons of the island perimeters
# Also get ids to match the labeled image
pgons = []
ids = []
for ip, p in enumerate(rp_islands['perimeter']):
ids.append(Ilabeled[p[0][0], p[0][1]]) # Store the index
p = np.vstack((p, p[0])) # Close the polygon
# Adjust for the single-pixel padding we added to the image
cr = gu.xy_to_coords(p[:, 1] - 1, p[:, 0] - 1, gt)
# Special cases: where the island is two pixels or less, we use the
# corner coordinates rather than the center coordinates to define
# the polygon.
if len(cr[0]) <= 2:
pixgon = [pixagon(cc, rc, pixlen) for cc, rc, in zip(cr[0], cr[1])]
if len(pixgon) > 1:
pixgon = cascaded_union(pixgon)
pgons.append(pixgon)
else:
pgons.append(Polygon(zip(cr[0], cr[1])))
# Do maximum width if requested
if do_maxwidth:
Idist = distance_transform_edt(Imp_invert)
maxwids = []
for i in ids:
maxwids.append(np.max(Idist[Ilabeled == i]) * 2 * pixlen)
# Convert requested properties to proper units
if 'area' in props:
rp_islands['area'] = rp_islands['area'] * pixarea
if 'major_axis_length' in props:
rp_islands[
'major_axis_length'] = rp_islands['major_axis_length'] * pixlen
if 'minor_axis_length' in props:
rp_islands[
'minor_axis_length'] = rp_islands['minor_axis_length'] * pixlen
if 'perim_len' in props:
rp_islands['perim_len'] = rp_islands['perim_len'] * pixlen
if 'convex_area' in props:
rp_islands['convex_area'] = rp_islands['convex_area'] * pixarea
# Need to change 'area' key as it's a function in geopandas
if 'area' in rp_islands:
rp_islands['Area'] = rp_islands.pop('area')
# Create islands geodataframe
gdf_dict = {
k: rp_islands[k]
for k in rp_islands if k not in ['coords', 'perimeter', 'centroid']
}
gdf_dict['geometry'] = pgons
gdf_dict['id'] = ids
if do_maxwidth:
gdf_dict['maxwid'] = maxwids
gdf = gpd.GeoDataFrame(gdf_dict)
gdf.crs = crs
# Identify and remove the border blob
border_id = Ilabeled[0][0]
Ilabeled[Ilabeled == border_id] = 0
gdf = gdf[gdf.id.values != border_id]
# Put 'id' column in front
colnames = [k for k in gdf.keys()]
colnames.remove('id')
colnames.insert(0, 'id')
gdf = gdf[colnames]
return gdf, Ilabeled[1:-1, 1:-1]
def surrounding_link_properties(links, nodes, Imask, islands, Iislands, pixlen,
pixarea):
"""
Find the links surrounding each island and computes their properties. This
function is useful for filtering; e.g. when it is desired to remove islands
surrounded by very large channels.
Parameters
----------
links : dict
Network links.
nodes : dict
Network nodes.
Imask : np.array
Binary mask of the channel network.
islands : geopandas.GeoDataframe
Contains island boundaries and associated properties. Created by
get_island_properties().
Iislands : np.array
Image wherein each island has a unique integer ID.
pixlen : numeric
Nominal length of a pixel (i.e. its resolution).
pixarea : numeric
Nominal area of a pixel.
Returns
-------
islands : geopandas.GeoDataframe
DESCRIPTION.
"""
# obj = d
# links = obj.links
# nodes = obj.nodes
# Imask = obj.Imask
# pixlen = obj.pixlen
# pixarea = obj.pixarea
# gt = obj.gt
# crs = obj.crs
# props=['area', 'maxwidth', 'major_axis_length', 'minor_axis_length']
# islands, Iislands = get_island_properties(obj.Imask, pixlen, pixarea, obj.crs, obj.gt, props)
# islands.to_file(r"C:\Users\Jon\Desktop\Research\John Shaw\Deltas\GBM\GBM_islands.shp")
# np.save(r'C:\Users\Jon\Desktop\Research\John Shaw\Deltas\GBM\GBM_Iislands.npy', Iislands)
# # islands = gpd.read_file(r"C:\Users\Jon\Desktop\Research\eBI\Results\Indus\Indus_islands.shp")
# # Iislands = np.load(r'C:\Users\Jon\Desktop\Research\eBI\Results\Indus\Indus_Iislands.npy')
# Rasterize the links and nodes
Iln = np.zeros(Imask.shape, dtype=int)
# Burn links into raster
for lidcs in links['idx']:
rcidcs = np.unravel_index(lidcs, Iln.shape)
Iln[rcidcs] = 1
# Burn nodes into raster, but use their negative so we can find them later
for nid, nidx in zip(nodes['id'], nodes['idx']):
rc = np.unravel_index(nidx, Iln.shape)
Iln[rc] = -nid
# Pad Ilids and Imask to avoid edge effects later
npad = 8
Iln = np.pad(Iln, npad, mode='constant')
Imask = np.array(np.pad(Imask, npad, mode='constant'), dtype=bool)
Iislands = np.pad(Iislands, npad, mode='constant')
# Make a binary version of the network skeleton
Iskel = np.array(Iln, dtype=bool)
# Invert the skeleton
Iskel = np.invert(Iskel)
# Find the regions of the inverted map
regions, Ireg = im.regionprops(Iskel,
props=['coords', 'area', 'label'],
connectivity=1)
regions['area'] = regions['area'] * pixarea
# Dilate each region and get the link ids that encompass it
# Ensure the set of link ids forms a closed loop; remove link ids that don't
# Use the loop links to compute the average river width around the island
# Finally, map the region to its corresponding island and compute the island
# properties to determine whether or not to fill it
keys = ['sur_area', 'sur_avg_wid', 'sur_max_wid', 'sur_min_wid']
for k in keys:
islands[k] = [np.nan for r in range(len(islands))]
islands['sur_link_ids'] = ['' for r in range(len(islands))]
# # Can speed up the calculation by skipping huge regions
# max_area = np.mean(links['wid_adj'])**2 * 20
imshape = Ireg.shape
for idx in range(len(islands)):
print(idx)
# Identify the region associated with the island
i_id = islands.id.values[idx]
r_id = stats.mode(Ireg[Iislands == i_id])[0][0]
# It is possible that the corresponding region is a 0 pixel, or one
# that comprises the network. This usually happens only when the island
# is one or two pixels. Skip these islands
if r_id == 0:
continue
r_idx = np.where(regions['label'] == r_id)[0][0]
# Get the region's properties
ra = regions['area'][r_idx]
rc = regions['coords'][r_idx]
# if ra > max_area:
# continue
# Make region blob
Irblob, cropped = im.crop_binary_coords(rc)
# Pad and dilate the blob
Irblob = np.pad(Irblob, npad, mode='constant')
Irblob = np.array(im.dilate(Irblob, n=2, strel='disk'), dtype=bool)
# Adjust padded image in case pads extend beyond original image boundary
if cropped[0] - npad < 0:
remove = npad - cropped[0]
Irblob = Irblob[:, remove:]
cropped[0] = 0
else:
cropped[0] = cropped[0] - npad
if cropped[1] - npad < 0:
remove = npad - cropped[1]
Irblob = Irblob[abs(remove):, :]
cropped[1] = 0
else:
cropped[1] = cropped[1] - npad
if cropped[2] + npad > imshape[1]:
remove = (cropped[2] + npad) - imshape[1]
Irblob = Irblob[:, :(-remove - 1)]
cropped[2] = imshape[1]
else:
cropped[2] = cropped[2] + npad
if cropped[3] + npad > imshape[0]:
remove = (cropped[3] + npad) - imshape[0]
Irblob = Irblob[:(-remove - 1), :]
cropped[3] = imshape[0]
else:
cropped[3] = cropped[3] + npad
# Get node ids that overlap the dilated blob
Iln_crop = Iln[cropped[1]:cropped[3] + 1, cropped[0]:cropped[2] + 1]
lids = Iln_crop[Irblob]
overlap_nodes = -np.unique(lids[lids < 0])
# Get the links connected to the overlap nodes so we can construct the
# mini-graph
overlap_links = [
li for l in
[nodes['conn'][nodes['id'].index(nid)] for nid in overlap_nodes]
for li in l
]
# Try to find a loop using the identified link ids
G = nx.Graph()
G.add_nodes_from(overlap_nodes)
lconn = [
links['conn'][links['id'].index(lid)] for lid in overlap_links
]
for lc in lconn:
G.add_edge(lc[0], lc[1])
surrounding_nodes = nx.cycle_basis(G)
# Check if we're dealing with a parallel loop
if len(surrounding_nodes) == 0:
if len(overlap_nodes) == 2:
if sum([
l in nodes['conn'][nodes['id'].index(overlap_nodes[1])]
for l in nodes['conn'][nodes['id'].index(
overlap_nodes[0])]
]) > 1:
surrounding_nodes = [[o for o in overlap_nodes]]
else: # We assume that if no loops were found, this must be a parallel loop
for on in overlap_nodes:
conn = nodes['conn'][nodes['id'].index(on)]
for on2 in overlap_nodes:
if on2 == on:
continue
else:
conn2 = nodes['conn'][nodes['id'].index(on2)]
if sum([c in conn2 for c in conn]) == 2:
surrounding_nodes = [[on, on2]]
break
# # Check if links are at outlet or inlet
# if len(surrounding_nodes) == 0:
# poss_nodes = np.array([links['conn'][links['id'].index(lid)] for lid in lids]).flatten()
# if any(np.in1d(poss_nodes, nodes['inlets'])) or any(np.in1d(poss_nodes, nodes['outlets'])):
# # Only keep link ids that have 3 or more occurrences
# surrounding_nodes = [[lid for lid, ct in zip(cts[0], cts[1]) if ct > 2]]
# print('io:{}'.format(ic))
if len(surrounding_nodes) == 0:
Warning('Cant find surrounding links for region {}.'.format(idx))
# If multiple loops were found
if len(surrounding_nodes) > 1:
# Choose the surrounding nodes that contain the highest
# fraction of overlap with the overlap_nodes
fracs = []
for sn in surrounding_nodes:
in_or_out = [s in overlap_nodes for s in sn]
fracs.append(sum(in_or_out) / len(overlap_nodes))
surrounding_nodes = [surrounding_nodes[fracs.index(max(fracs))]]
# At this point, only one loop should be present
# if len(surrounding_nodes) != 1:
# import pdb
# pdb.set_trace()
assert (len(surrounding_nodes) == 1)
surrounding_nodes = surrounding_nodes[0]
surrounding_nodes.append(surrounding_nodes[0])
# Get the links of the loop
surrounding_links = []
for i in range(len(surrounding_nodes) - 1):
n1 = surrounding_nodes[i]
n2 = surrounding_nodes[i + 1]
for lid in overlap_links:
lconn = links['conn'][links['id'].index(lid)]
if n1 in lconn and n2 in lconn:
surrounding_links.append(lid)
surrounding_links = list(set(surrounding_links))
islands.sur_link_ids.values[idx] = str(surrounding_links)
# Now that links surrounding the island are known, can compute some
# of their morphologic metrics.
# Use a length-weighted width. Could alternatively use the 'wid_pix' but
# that includes the misleading connector pixels
wids = np.array([
links['wid_adj'][links['id'].index(lid)]
for lid in surrounding_links
])
lens = np.array([
links['len_adj'][links['id'].index(lid)]
for lid in surrounding_links
])
avg_wid = np.sum(wids * lens) / np.sum(lens)
islands.sur_avg_wid.values[idx] = avg_wid
islands.sur_max_wid.values[idx] = np.max(wids)
islands.sur_min_wid.values[idx] = np.min(wids)
islands.sur_area.values[idx] = ra # already converted to pixarea
return islands
