class ScopeInterface(QObject):
new_data = pyqtSignal(list)
def __init__(self, parent=None):
super(ScopeInterface, self).__init__(parent)
self.inprogress = False
def initialize(self):
self.sample_rate_index = 8
self.voltage_range = 0x01
self.data_points = 3 * 1024
self.trigger_level = 150
self.trigger_type = +1
self.scope = Oscilloscope()
self.scope.setup()
self.scope.open_handle()
if (not self.scope.is_device_firmware_present):
self.scope.flash_firmware()
self.scope.set_interface(1)
# choose ISO
self.scope.set_num_channels(1)
self.scope.set_sample_rate(self.sample_rate_index)
self.scope.set_ch1_voltage_range(self.voltage_range)
time.sleep(0.1)
return None
def capture(self):
if not self.inprogress:
self.inprogress = True
self.scope.start_capture()
shutdown_event = self.scope.read_async(self.data_callback,
self.data_points,
outstanding_transfers=25)
print("Clearing FIFO and starting data transfer...")
def data_callback(self, ch1_data, _):
d = list(ch1_data)
i = 0
#print("got new data ", time.time(), " : ", len(d))
if self.trigger_type > 0:
while (i < len(d) - 1) and not (d[i + 1] > self.trigger_level
and d[i] < self.trigger_level):
i += 1
#print("Trigger at ", i)
if (i != len(d) - 1):
self.new_data.emit(d[i:])
def stop(self):
self.scope.stop_capture()
print("Stopping new transfers.")
shutdown_event.set()
print("Snooze 1")
time.sleep(1)
print("Closing handle")
self.scope.close_handle()
print("Handle closed.")
self.inprogress = False
class ScopeInterface(QObject):
new_data = pyqtSignal(list)
def __init__(self, parent=None):
super(ScopeInterface, self).__init__(parent)
self.inprogress = False
def initialize(self):
self.sample_rate_index = 8
self.voltage_range = 0x01
self.data_points = 3 * 1024
self.trigger_level = 150
self.trigger_type = +1
self.scope = Oscilloscope()
self.scope.setup()
self.scope.open_handle()
if (not self.scope.is_device_firmware_present):
self.scope.flash_firmware()
self.scope.set_interface(1); # choose ISO
self.scope.set_num_channels(1)
self.scope.set_sample_rate(self.sample_rate_index)
self.scope.set_ch1_voltage_range(self.voltage_range)
time.sleep(0.1)
return None
def capture(self):
if not self.inprogress:
self.inprogress = True
self.scope.start_capture()
shutdown_event = self.scope.read_async(self.data_callback, self.data_points, outstanding_transfers=25)
print("Clearing FIFO and starting data transfer...")
def data_callback(self, ch1_data, _):
d = list(ch1_data)
i = 0
#print("got new data ", time.time(), " : ", len(d))
if self.trigger_type > 0:
while (i < len(d) - 1) and not (d[i+1] > self.trigger_level and d[i] < self.trigger_level):
i += 1
#print("Trigger at ", i)
if (i != len(d) - 1):
self.new_data.emit(d[i:])
def stop(self):
self.scope.stop_capture()
print("Stopping new transfers.")
shutdown_event.set()
print("Snooze 1")
time.sleep(1)
print("Closing handle")
self.scope.close_handle()
print("Handle closed.")
self.inprogress = False
def test_find_device(self):
print "Testing finding device and flashing stock firmware."
scope = Oscilloscope()
assert scope.setup()
assert scope.open_handle()
assert scope.flash_firmware()
assert scope.close_handle()
def test_clear_fifo(self):
print "Testing explicitly clearing the FIFO."
scope = Oscilloscope()
assert scope.setup()
assert scope.open_handle()
assert scope.flash_firmware()
assert scope.clear_fifo()
assert scope.close_handle()
def test_read_firmware(self):
print "Testing read_firmware method on scope."
scope = Oscilloscope()
assert scope.setup()
assert scope.open_handle()
assert scope.flash_firmware()
assert scope.read_firmware()
assert scope.close_handle()
def test_set_sample_rate(self):
print "Testing setting the sample rate."
scope = Oscilloscope()
assert scope.setup()
assert scope.open_handle()
assert scope.flash_firmware()
for rate_index in scope.SAMPLE_RATES.keys():
scope.set_sample_rate(rate_index)
assert scope.close_handle()
def test_get_cal_values(self):
print "Testing getting calibration values."
scope = Oscilloscope()
assert scope.setup()
assert scope.open_handle()
assert scope.flash_firmware()
cal_values = scope.get_calibration_values()
assert cal_values
assert scope.close_handle()
def test_flash_firmware(self):
print "Testing flashing multiple firmwares."
scope = Oscilloscope()
assert scope.setup()
assert scope.open_handle()
assert scope.flash_firmware(stock_firmware, supports_single_channel=False)
assert scope.flash_firmware(mod_firmware_01)
assert scope.flash_firmware(stock_firmware, supports_single_channel=False)
assert scope.close_handle()
def test_set_channel_voltage_range(self):
print "Testing setting the voltage range."
scope = Oscilloscope()
assert scope.setup()
assert scope.open_handle()
assert scope.flash_firmware()
for vrange in scope.VOLTAGE_RANGES.keys():
assert scope.set_ch1_voltage_range(vrange)
assert scope.set_ch1_voltage_range(vrange)
assert scope.close_handle()
def test_read_data(self):
print "Testing reading data from the oscilloscope."
scope = Oscilloscope()
assert scope.setup()
assert scope.open_handle()
assert scope.flash_firmware()
ch1_data, _ = scope.read_data(data_size=0x400)
print ch1_data
assert ch1_data
assert scope.close_handle()
def test_set_num_channels(self):
print "Testing setting the number of channels with modified firmware."
scope = Oscilloscope()
assert scope.setup()
assert scope.open_handle()
assert scope.flash_firmware(mod_firmware_01)
assert scope.set_num_channels(1)
assert scope.set_num_channels(2)
assert scope.set_num_channels(1)
assert scope.close_handle()
def test_set_one_channel_and_read(self):
print "Testing setting one channel and reading it."
scope = Oscilloscope()
assert scope.setup()
assert scope.open_handle()
assert scope.flash_firmware(mod_firmware_01)
assert scope.set_ch1_voltage_range(0xA)
assert scope.set_sample_rate(0x10)
assert scope.set_num_channels(1)
ch1_data, ch2_data = scope.read_data(0x4000)
assert ch1_data
assert not ch2_data
assert scope.close_handle()
def test_data_scaling(self):
print "Testing setting various scale facotrs and reading."
scale_factor = 0x01
scope = Oscilloscope()
assert scope.setup()
assert scope.open_handle()
assert scope.flash_firmware()
assert scope.set_ch1_voltage_range(scale_factor)
assert scope.set_sample_rate(27)
ch1_data, _ = scope.read_data(0x100000)
ch1_data = scope.scale_read_data(ch1_data, scale_factor)
print "Max:", max(ch1_data), "(V), Min:", min(ch1_data), "(V)"
assert ch1_data
assert scope.close_handle()
def test_read_many_sizes(self):
print "Testing reading many different data sizes"
scope = Oscilloscope()
assert scope.setup()
assert scope.open_handle()
assert scope.flash_firmware()
data_size = 0x400
for _ in xrange(11):
print "DATA SIZE", data_size
ch1_data, ch2_data = scope.read_data(data_size=data_size, raw=True)
print len(ch1_data)
print len(ch2_data)
assert ch1_data, ch2_data
data_size <<= 1
assert scope.close_handle()
#!/usr/bin/python3 __author__ = 'Robert Cope' from PyHT6022.LibUsbScope import Oscilloscope from PyHT6022.HantekFirmware import mod_firmware_iso as Firmware scope = Oscilloscope() scope.setup() scope.open_handle() scope.flash_firmware(firmware=Firmware) scope.close_handle()
__author__ = 'Jochen Hoenicke'
from PyHT6022.LibUsbScope import Oscilloscope
scope = Oscilloscope()
scope.setup()
scope.open_handle()
eeprom = scope.read_eeprom(0, 256)
scope.close_handle()
print eeprom.encode('hex')