def run(plotIt=True):
cs, ncx, ncz, npad = 5.0, 25, 15, 15
hx = [(cs, ncx), (cs, npad, 1.3)]
hz = [(cs, npad, -1.3), (cs, ncz), (cs, npad, 1.3)]
mesh = discretize.CylMesh([hx, 1, hz], "00C")
active = mesh.vectorCCz < 0.0
layer = (mesh.vectorCCz < 0.0) & (mesh.vectorCCz >= -100.0)
actMap = maps.InjectActiveCells(mesh, active, np.log(1e-8), nC=mesh.nCz)
mapping = maps.ExpMap(mesh) * maps.SurjectVertical1D(mesh) * actMap
sig_half = 2e-3
sig_air = 1e-8
sig_layer = 1e-3
sigma = np.ones(mesh.nCz) * sig_air
sigma[active] = sig_half
sigma[layer] = sig_layer
mtrue = np.log(sigma[active])
rxOffset = 1e-3
rx = time_domain.Rx.PointMagneticFluxTimeDerivative(
np.array([[rxOffset, 0.0, 30]]), np.logspace(-5, -3, 31), "z"
)
src = time_domain.Src.MagDipole([rx], location=np.array([0.0, 0.0, 80]))
survey = time_domain.Survey([src])
time_steps = [(1e-06, 20), (1e-05, 20), (0.0001, 20)]
simulation = time_domain.Simulation3DElectricField(
mesh, sigmaMap=mapping, survey=survey, time_steps=time_steps
)
# d_true = simulation.dpred(mtrue)
# create observed data
rel_err = 0.05
data = simulation.make_synthetic_data(mtrue, relative_error=rel_err)
dmisfit = data_misfit.L2DataMisfit(simulation=simulation, data=data)
regMesh = discretize.TensorMesh([mesh.hz[mapping.maps[-1].indActive]])
reg = regularization.Tikhonov(regMesh, alpha_s=1e-2, alpha_x=1.0)
opt = optimization.InexactGaussNewton(maxIter=5, LSshorten=0.5)
invProb = inverse_problem.BaseInvProblem(dmisfit, reg, opt)
# Create an inversion object
beta = directives.BetaSchedule(coolingFactor=5, coolingRate=2)
betaest = directives.BetaEstimate_ByEig(beta0_ratio=1e0)
inv = inversion.BaseInversion(invProb, directiveList=[beta, betaest])
m0 = np.log(np.ones(mtrue.size) * sig_half)
simulation.counter = opt.counter = utils.Counter()
opt.remember("xc")
mopt = inv.run(m0)
if plotIt:
fig, ax = plt.subplots(1, 2, figsize=(10, 6))
ax[0].loglog(rx.times, -invProb.dpred, "b.-")
ax[0].loglog(rx.times, -data.dobs, "r.-")
ax[0].legend(("Noisefree", "$d^{obs}$"), fontsize=16)
ax[0].set_xlabel("Time (s)", fontsize=14)
ax[0].set_ylabel("$B_z$ (T)", fontsize=16)
ax[0].set_xlabel("Time (s)", fontsize=14)
ax[0].grid(color="k", alpha=0.5, linestyle="dashed", linewidth=0.5)
plt.semilogx(sigma[active], mesh.vectorCCz[active])
plt.semilogx(np.exp(mopt), mesh.vectorCCz[active])
ax[1].set_ylim(-600, 0)
ax[1].set_xlim(1e-4, 1e-2)
ax[1].set_xlabel("Conductivity (S/m)", fontsize=14)
ax[1].set_ylabel("Depth (m)", fontsize=14)
ax[1].grid(color="k", alpha=0.5, linestyle="dashed", linewidth=0.5)
plt.legend(["$\sigma_{true}$", "$\sigma_{pred}$"])
# Set up the source list
src_list = [
TDEM.Src.LineCurrent(
receiver_list=rec_list,
location=np.array([[*src[::2]], [*src[1::2]]]),
),
]
# Create `Survey`
survey = TDEM.Survey(src_list)
# Define the `Simulation`
prob = TDEM.Simulation3DElectricField(
mesh,
survey=survey,
rhoMap=maps.IdentityMap(mesh),
solver=Solver,
time_steps=time_steps,
)
###############################################################################
# Compute
# """""""
spg_bg = prob.dpred(mres_bg)
spg_tg = prob.dpred(mres_tg)
###############################################################################
# (F) Plots
# ---------
def run(plotIt=True, saveFig=False, cleanup=True):
"""
Run 1D inversions for a single sounding of the RESOLVE and SkyTEM
bookpurnong data
:param bool plotIt: show the plots?
:param bool saveFig: save the figure
:param bool cleanup: remove the downloaded results
"""
downloads, directory = download_and_unzip_data()
resolve = h5py.File(os.path.sep.join([directory, "booky_resolve.hdf5"]),
"r")
skytem = h5py.File(os.path.sep.join([directory, "booky_skytem.hdf5"]), "r")
river_path = resolve["river_path"].value
# Choose a sounding location to invert
xloc, yloc = 462100.0, 6196500.0
rxind_skytem = np.argmin(
abs(skytem["xy"][:, 0] - xloc) + abs(skytem["xy"][:, 1] - yloc))
rxind_resolve = np.argmin(
abs(resolve["xy"][:, 0] - xloc) + abs(resolve["xy"][:, 1] - yloc))
# Plot both resolve and skytem data on 2D plane
fig = plt.figure(figsize=(13, 6))
title = ["RESOLVE In-phase 400 Hz", "SkyTEM High moment 156 $\mu$s"]
ax1 = plt.subplot(121)
ax2 = plt.subplot(122)
axs = [ax1, ax2]
out_re = utils.plot2Ddata(
resolve["xy"],
resolve["data"][:, 0],
ncontour=100,
contourOpts={"cmap": "viridis"},
ax=ax1,
)
vmin, vmax = out_re[0].get_clim()
cb_re = plt.colorbar(out_re[0],
ticks=np.linspace(vmin, vmax, 3),
ax=ax1,
fraction=0.046,
pad=0.04)
temp_skytem = skytem["data"][:, 5].copy()
temp_skytem[skytem["data"][:, 5] > 7e-10] = 7e-10
out_sky = utils.plot2Ddata(
skytem["xy"][:, :2],
temp_skytem,
ncontour=100,
contourOpts={
"cmap": "viridis",
"vmax": 7e-10
},
ax=ax2,
)
vmin, vmax = out_sky[0].get_clim()
cb_sky = plt.colorbar(
out_sky[0],
ticks=np.linspace(vmin, vmax * 0.99, 3),
ax=ax2,
format="%.1e",
fraction=0.046,
pad=0.04,
)
cb_re.set_label("Bz (ppm)")
cb_sky.set_label("dB$_z$ / dt (V/A-m$^4$)")
for i, ax in enumerate(axs):
xticks = [460000, 463000]
yticks = [6195000, 6198000, 6201000]
ax.set_xticks(xticks)
ax.set_yticks(yticks)
ax.plot(xloc, yloc, "wo")
ax.plot(river_path[:, 0], river_path[:, 1], "k", lw=0.5)
ax.set_aspect("equal")
if i == 1:
ax.plot(skytem["xy"][:, 0],
skytem["xy"][:, 1],
"k.",
alpha=0.02,
ms=1)
ax.set_yticklabels([str(" ") for f in yticks])
else:
ax.plot(resolve["xy"][:, 0],
resolve["xy"][:, 1],
"k.",
alpha=0.02,
ms=1)
ax.set_yticklabels([str(f) for f in yticks])
ax.set_ylabel("Northing (m)")
ax.set_xlabel("Easting (m)")
ax.set_title(title[i])
ax.axis("equal")
# plt.tight_layout()
if saveFig is True:
fig.savefig("resolve_skytem_data.png", dpi=600)
# ------------------ Mesh ------------------ #
# Step1: Set 2D cylindrical mesh
cs, ncx, ncz, npad = 1.0, 10.0, 10.0, 20
hx = [(cs, ncx), (cs, npad, 1.3)]
npad = 12
temp = np.logspace(np.log10(1.0), np.log10(12.0), 19)
temp_pad = temp[-1] * 1.3**np.arange(npad)
hz = np.r_[temp_pad[::-1], temp[::-1], temp, temp_pad]
mesh = discretize.CylMesh([hx, 1, hz], "00C")
active = mesh.vectorCCz < 0.0
# Step2: Set a SurjectVertical1D mapping
# Note: this sets our inversion model as 1D log conductivity
# below subsurface
active = mesh.vectorCCz < 0.0
actMap = maps.InjectActiveCells(mesh, active, np.log(1e-8), nC=mesh.nCz)
mapping = maps.ExpMap(mesh) * maps.SurjectVertical1D(mesh) * actMap
sig_half = 1e-1
sig_air = 1e-8
sigma = np.ones(mesh.nCz) * sig_air
sigma[active] = sig_half
# Initial and reference model
m0 = np.log(sigma[active])
# ------------------ RESOLVE Forward Simulation ------------------ #
# Step3: Invert Resolve data
# Bird height from the surface
b_height_resolve = resolve["src_elevation"].value
src_height_resolve = b_height_resolve[rxind_resolve]
# Set Rx (In-phase and Quadrature)
rxOffset = 7.86
bzr = FDEM.Rx.PointMagneticFluxDensitySecondary(
np.array([[rxOffset, 0.0, src_height_resolve]]),
orientation="z",
component="real",
)
bzi = FDEM.Rx.PointMagneticFluxDensity(
np.array([[rxOffset, 0.0, src_height_resolve]]),
orientation="z",
component="imag",
)
# Set Source (In-phase and Quadrature)
frequency_cp = resolve["frequency_cp"].value
freqs = frequency_cp.copy()
srcLoc = np.array([0.0, 0.0, src_height_resolve])
srcList = [
FDEM.Src.MagDipole([bzr, bzi], freq, srcLoc, orientation="Z")
for freq in freqs
]
# Set FDEM survey (In-phase and Quadrature)
survey = FDEM.Survey(srcList)
prb = FDEM.Simulation3DMagneticFluxDensity(mesh,
sigmaMap=mapping,
Solver=Solver)
prb.survey = survey
# ------------------ RESOLVE Inversion ------------------ #
# Primary field
bp = -mu_0 / (4 * np.pi * rxOffset**3)
# Observed data
cpi_inds = [0, 2, 6, 8, 10]
cpq_inds = [1, 3, 7, 9, 11]
dobs_re = (np.c_[resolve["data"][rxind_resolve, :][cpi_inds],
resolve["data"][rxind_resolve, :][cpq_inds], ].flatten() *
bp * 1e-6)
# Uncertainty
relative = np.repeat(np.r_[np.ones(3) * 0.1, np.ones(2) * 0.15], 2)
floor = 20 * abs(bp) * 1e-6
std = abs(dobs_re) * relative + floor
# Data Misfit
data_resolve = data.Data(dobs=dobs_re,
survey=survey,
standard_deviation=std)
dmisfit = data_misfit.L2DataMisfit(simulation=prb, data=data_resolve)
# Regularization
regMesh = discretize.TensorMesh([mesh.hz[mapping.maps[-1].indActive]])
reg = regularization.Simple(regMesh, mapping=maps.IdentityMap(regMesh))
# Optimization
opt = optimization.InexactGaussNewton(maxIter=5)
# statement of the inverse problem
invProb = inverse_problem.BaseInvProblem(dmisfit, reg, opt)
# Inversion directives and parameters
target = directives.TargetMisfit() # stop when we hit target misfit
invProb.beta = 2.0
inv = inversion.BaseInversion(invProb, directiveList=[target])
reg.alpha_s = 1e-3
reg.alpha_x = 1.0
reg.mref = m0.copy()
opt.LSshorten = 0.5
opt.remember("xc")
# run the inversion
mopt_re = inv.run(m0)
dpred_re = invProb.dpred
# ------------------ SkyTEM Forward Simulation ------------------ #
# Step4: Invert SkyTEM data
# Bird height from the surface
b_height_skytem = skytem["src_elevation"].value
src_height = b_height_skytem[rxind_skytem]
srcLoc = np.array([0.0, 0.0, src_height])
# Radius of the source loop
area = skytem["area"].value
radius = np.sqrt(area / np.pi)
rxLoc = np.array([[radius, 0.0, src_height]])
# Parameters for current waveform
t0 = skytem["t0"].value
times = skytem["times"].value
waveform_skytem = skytem["waveform"].value
offTime = t0
times_off = times - t0
# Note: we are Using theoretical VTEM waveform,
# but effectively fits SkyTEM waveform
peakTime = 1.0000000e-02
a = 3.0
dbdt_z = TDEM.Rx.PointMagneticFluxTimeDerivative(
locations=rxLoc, times=times_off[:-3] + offTime,
orientation="z") # vertical db_dt
rxList = [dbdt_z] # list of receivers
srcList = [
TDEM.Src.CircularLoop(
rxList,
loc=srcLoc,
radius=radius,
orientation="z",
waveform=TDEM.Src.VTEMWaveform(offTime=offTime,
peakTime=peakTime,
a=3.0),
)
]
# solve the problem at these times
timeSteps = [
(peakTime / 5, 5),
((offTime - peakTime) / 5, 5),
(1e-5, 5),
(5e-5, 5),
(1e-4, 10),
(5e-4, 15),
]
prob = TDEM.Simulation3DElectricField(mesh,
time_steps=timeSteps,
sigmaMap=mapping,
Solver=Solver)
survey = TDEM.Survey(srcList)
prob.survey = survey
src = srcList[0]
rx = src.receiver_list[0]
wave = []
for time in prob.times:
wave.append(src.waveform.eval(time))
wave = np.hstack(wave)
out = prob.dpred(m0)
# plot the waveform
fig = plt.figure(figsize=(5, 3))
times_off = times - t0
plt.plot(waveform_skytem[:, 0], waveform_skytem[:, 1], "k.")
plt.plot(prob.times, wave, "k-", lw=2)
plt.legend(("SkyTEM waveform", "Waveform (fit)"), fontsize=10)
for t in rx.times:
plt.plot(np.ones(2) * t, np.r_[-0.03, 0.03], "k-")
plt.ylim(-0.1, 1.1)
plt.grid(True)
plt.xlabel("Time (s)")
plt.ylabel("Normalized current")
if saveFig:
fig.savefig("skytem_waveform", dpi=200)
# Observed data
dobs_sky = skytem["data"][rxind_skytem, :-3] * area
# ------------------ SkyTEM Inversion ------------------ #
# Uncertainty
relative = 0.12
floor = 7.5e-12
std = abs(dobs_sky) * relative + floor
# Data Misfit
data_sky = data.Data(dobs=-dobs_sky, survey=survey, standard_deviation=std)
dmisfit = data_misfit.L2DataMisfit(simulation=prob, data=data_sky)
# Regularization
regMesh = discretize.TensorMesh([mesh.hz[mapping.maps[-1].indActive]])
reg = regularization.Simple(regMesh, mapping=maps.IdentityMap(regMesh))
# Optimization
opt = optimization.InexactGaussNewton(maxIter=5)
# statement of the inverse problem
invProb = inverse_problem.BaseInvProblem(dmisfit, reg, opt)
# Directives and Inversion Parameters
target = directives.TargetMisfit()
invProb.beta = 20.0
inv = inversion.BaseInversion(invProb, directiveList=[target])
reg.alpha_s = 1e-1
reg.alpha_x = 1.0
opt.LSshorten = 0.5
opt.remember("xc")
reg.mref = mopt_re # Use RESOLVE model as a reference model
# run the inversion
mopt_sky = inv.run(m0)
dpred_sky = invProb.dpred
# Plot the figure from the paper
plt.figure(figsize=(12, 8))
fs = 13 # fontsize
matplotlib.rcParams["font.size"] = fs
ax0 = plt.subplot2grid((2, 2), (0, 0), rowspan=2)
ax1 = plt.subplot2grid((2, 2), (0, 1))
ax2 = plt.subplot2grid((2, 2), (1, 1))
# Recovered Models
sigma_re = np.repeat(np.exp(mopt_re), 2, axis=0)
sigma_sky = np.repeat(np.exp(mopt_sky), 2, axis=0)
z = np.repeat(mesh.vectorCCz[active][1:], 2, axis=0)
z = np.r_[mesh.vectorCCz[active][0], z, mesh.vectorCCz[active][-1]]
ax0.semilogx(sigma_re, z, "k", lw=2, label="RESOLVE")
ax0.semilogx(sigma_sky, z, "b", lw=2, label="SkyTEM")
ax0.set_ylim(-50, 0)
# ax0.set_xlim(5e-4, 1e2)
ax0.grid(True)
ax0.set_ylabel("Depth (m)")
ax0.set_xlabel("Conducivity (S/m)")
ax0.legend(loc=3)
ax0.set_title("(a) Recovered Models")
# RESOLVE Data
ax1.loglog(frequency_cp,
dobs_re.reshape((5, 2))[:, 0] / bp * 1e6,
"k-",
label="Obs (real)")
ax1.loglog(
frequency_cp,
dobs_re.reshape((5, 2))[:, 1] / bp * 1e6,
"k--",
label="Obs (imag)",
)
ax1.loglog(
frequency_cp,
dpred_re.reshape((5, 2))[:, 0] / bp * 1e6,
"k+",
ms=10,
markeredgewidth=2.0,
label="Pred (real)",
)
ax1.loglog(
frequency_cp,
dpred_re.reshape((5, 2))[:, 1] / bp * 1e6,
"ko",
ms=6,
markeredgecolor="k",
markeredgewidth=0.5,
label="Pred (imag)",
)
ax1.set_title("(b) RESOLVE")
ax1.set_xlabel("Frequency (Hz)")
ax1.set_ylabel("Bz (ppm)")
ax1.grid(True)
ax1.legend(loc=3, fontsize=11)
# SkyTEM data
ax2.loglog(times_off[3:] * 1e6, dobs_sky / area, "b-", label="Obs")
ax2.loglog(
times_off[3:] * 1e6,
-dpred_sky / area,
"bo",
ms=4,
markeredgecolor="k",
markeredgewidth=0.5,
label="Pred",
)
ax2.set_xlim(times_off.min() * 1e6 * 1.2, times_off.max() * 1e6 * 1.1)
ax2.set_xlabel("Time ($\mu s$)")
ax2.set_ylabel("dBz / dt (V/A-m$^4$)")
ax2.set_title("(c) SkyTEM High-moment")
ax2.grid(True)
ax2.legend(loc=3)
a3 = plt.axes([0.86, 0.33, 0.1, 0.09], facecolor=[0.8, 0.8, 0.8, 0.6])
a3.plot(prob.times * 1e6, wave, "k-")
a3.plot(rx.times * 1e6,
np.zeros_like(rx.times),
"k|",
markeredgewidth=1,
markersize=12)
a3.set_xlim([prob.times.min() * 1e6 * 0.75, prob.times.max() * 1e6 * 1.1])
a3.set_title("(d) Waveform", fontsize=11)
a3.set_xticks([prob.times.min() * 1e6, t0 * 1e6, prob.times.max() * 1e6])
a3.set_yticks([])
# a3.set_xticklabels(['0', '2e4'])
a3.set_xticklabels(["-1e4", "0", "1e4"])
plt.tight_layout()
if saveFig:
plt.savefig("booky1D_time_freq.png", dpi=600)
if plotIt:
plt.show()
resolve.close()
skytem.close()
if cleanup:
print(os.path.split(directory)[:-1])
os.remove(
os.path.sep.join(directory.split()[:-1] +
["._bookpurnong_inversion"]))
os.remove(downloads)
shutil.rmtree(directory)
# Set up the source list
src_list = [
TDEM.Src.LineCurrent(
rxList=rec_list,
loc=np.array([[*src[::2]], [*src[1::2]]]),
),
]
# Create `Survey`
survey = TDEM.Survey(src_list)
# Define the `Simulation`
prob = TDEM.Simulation3DElectricField(
mesh,
survey=survey,
rhoMap=maps.IdentityMap(mesh),
Solver=pymatsolver.Pardiso,
timeSteps=time_steps,
)
###############################################################################
# Compute
# """""""
spg_bg = prob.dpred(mres_bg)
spg_tg = prob.dpred(mres_tg)
###############################################################################
# (F) Plots
# ---------