def run_analysis(self, argv):
"""Run this analysis"""
args = self._parser.parse_args(argv)
if not HAVE_ST:
raise RuntimeError("Trying to run fermipy analysis, but don't have ST")
gta = GTAnalysis(args.config,
logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
gta.setup(overwrite=False)
gta.load_roi('fit_baseline')
gta.print_roi()
basedir = os.path.dirname(args.config)
# This should be a no-op, b/c it was done in the baseline analysis
gta.free_sources(skydir=gta.roi.skydir, distance=1.0, pars='norm')
for profile in args.profiles:
pkey, pdict = SEDAnalysis._build_profile_dict(basedir, profile)
# test_case need to be a dict with spectrum and morphology
gta.add_source(pkey, pdict)
# refit the ROI
gta.fit()
# build the SED
gta.sed(pkey, outfile="sed_%s.fits" % pkey)
# remove the source
gta.delete_source(pkey)
# put the ROI back to how it was
gta.load_xml('fit_baseline')
return gta
def run_analysis(self, argv):
"""Run this analysis"""
args = self._parser.parse_args(argv)
if not HAVE_ST:
raise RuntimeError(
"Trying to run fermipy analysis, but don't have ST")
gta = GTAnalysis(args.config, logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
gta.setup(overwrite=False)
baseline_roi_fit(gta, make_plots=args.make_plots,
minmax_npred=[1e3, np.inf])
localize_sources(gta, nstep=5, dtheta_max=0.5, update=True,
prefix='base', make_plots=args.make_plots)
gta.find_sources(sqrt_ts_threshold=5.0, search_skydir=gta.roi.skydir,
search_minmax_radius=[1.0, np.nan])
gta.optimize()
gta.print_roi()
gta.print_params()
gta.free_sources(skydir=gta.roi.skydir, distance=1.0, pars='norm')
gta.fit(covar=True)
gta.print_roi()
gta.print_params()
gta.write_roi(args.roi_baseline, make_plots=args.make_plots)
def run_analysis(self, argv):
"""Run this analysis"""
args = self._parser.parse_args(argv)
if not HAVE_ST:
raise RuntimeError("Trying to run fermipy analysis, but don't have ST")
gta = GTAnalysis(args.config, logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
gta.setup(overwrite=False)
gta.free_sources(False)
gta.print_roi()
gta.optimize()
gta.print_roi()
exclude = ['3FGL J1707.8+5626']
# Localize all point sources
for src in sorted(gta.roi.sources, key=lambda t: t['ts'], reverse=True):
# for s in gta.roi.sources:
if not src['SpatialModel'] == 'PointSource':
continue
if src['offset_roi_edge'] > -0.1:
continue
if src.name in exclude:
continue
if not '3FGL' in src.name:
continue
gta.localize(src.name, nstep=5, dtheta_max=0.5, update=True,
prefix='base', make_plots=True)
gta.optimize()
gta.print_roi()
gta.write_roi('base_roi', make_plots=True)
gta.find_sources(sqrt_ts_threshold=5.0)
gta.optimize()
gta.print_roi()
gta.print_params()
gta.free_sources(skydir=gta.roi.skydir, distance=1.0, pars='norm')
gta.fit()
gta.print_roi()
gta.print_params()
gta.write_roi('fit_baseline', make_plots=True)
def main():
usage = "usage: %(prog)s [config file]"
description = "Run fermipy analysis chain."
parser = argparse.ArgumentParser(usage=usage,description=description)
parser.add_argument('--config', default = 'sample_config.yaml')
parser.add_argument('--source', default = None)
args = parser.parse_args()
gta = GTAnalysis(args.config)
if args.source is None:
src_name = gta.roi.sources[0].name
gta.setup()
gta.optimize()
if (gta.roi[src_name]['ts'] > 1000. and
gta.roi[src_name]['SpectrumType'] == 'PowerLaw'):
gta.set_source_spectrum(src_name, spectrum_type='LogParabola',
spectrum_pars={'beta' : {'value' : 0.0, 'scale' : 1.0,
'min' : 0.0, 'max' : 2.0}})
gta.free_source(src_name)
gta.fit()
gta.free_source(src_name, False)
loc = gta.localize(src_name, free_radius=1.0, update=True, make_plots=True)
model = {'Index' : 2.0, 'SpatialModel' : 'PointSource'}
srcs = gta.find_sources(model=model, sqrt_ts_threshold=5.0,
min_separation=0.5)
sed = gta.sed(src_name, free_radius=1.0, make_plots=True)
gta.tsmap(make_plots=True)
gta.tsmap(prefix='excludeSource', exclude=[src_name], make_plots=True)
gta.write_roi('fit0')
lc = gta.lightcurve(src_name, binsz=86400.*28.0, free_radius=3.0, use_scaled_srcmap=True,
multithread=False)
def run_analysis(config):
print('Running analysis...')
gta = GTAnalysis(config)
gta.setup()
gta.optimize()
gta.print_roi()
# Localize and generate SED for first source in ROI
srcname = gta.roi.sources[0].name
gta.free_source(srcname)
gta.fit()
gta.localize(srcname)
gta.sed(srcname)
gta.write_roi('roi', make_plots=True)
gta.tsmap(make_plots=True)
gta.residmap(make_plots=True)
def run_analysis(config):
print('Running analysis...')
gta = GTAnalysis(config)
gta.setup()
gta.optimize()
gta.print_roi()
# Localize and generate SED for first source in ROI
srcname = gta.roi.sources[0].name
gta.free_source(srcname)
gta.fit()
gta.localize(srcname)
gta.sed(srcname)
gta.write_roi('roi', make_plots=True)
gta.tsmap(make_plots=True)
gta.residmap(make_plots=True)
def run_analysis(self, argv):
"""Run this analysis"""
args = self._parser.parse_args(argv)
if not HAVE_ST:
raise RuntimeError(
"Trying to run fermipy analysis, but don't have ST")
gta = GTAnalysis(args.config,
logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
gta.setup(overwrite=False)
baseline_roi_fit(gta,
make_plots=args.make_plots,
minmax_npred=[1e3, np.inf])
localize_sources(gta,
nstep=5,
dtheta_max=0.5,
update=True,
prefix='base',
make_plots=args.make_plots)
gta.find_sources(sqrt_ts_threshold=5.0,
search_skydir=gta.roi.skydir,
search_minmax_radius=[1.0, np.nan])
gta.optimize()
gta.print_roi()
gta.print_params()
gta.free_sources(skydir=gta.roi.skydir, distance=1.0, pars='norm')
gta.fit(covar=True)
gta.print_roi()
gta.print_params()
gta.write_roi(args.roi_baseline, make_plots=args.make_plots)
# Fix sources w/ significance < 10
gta.free_sources(cuts=('Detection_Significance',0,10),free=False)
# Free sources within 3 degrees of ROI center
gta.free_sources(distance=3.0)
# Free sources by name
gta.free_source('mkn421')
gta.free_source('galdiff')
gta.free_source('isodiff')
# Free only the normalization of a specific source
gta.free_norm('3FGL J1129.0+3705')
gta.fit()
# Compute the SED for a source
gta.sed('mkn421')
# Write the current state of the ROI model -- this will generate XML
# model files for each component as well as an output analysis
# dictionary in numpy and yaml formats
gta.write_roi('fit1')
def main():
usage = "usage: %(prog)s -c config.yaml"
description = "Run the lc analysis"
parser = argparse.ArgumentParser(usage=usage, description=description)
parser.add_argument('-c', '--conf', required=True)
parser.add_argument('-i',
required=False,
default=0,
help='Set local or scratch calculation',
type=int)
parser.add_argument('--state',
help='analysis state',
choices=['avgspec', 'setup'],
default='avgspec')
parser.add_argument('--forcepl',
default=0,
help='Force the target source to have power-law shape',
type=int)
parser.add_argument('--createsed',
default=0,
help='Create SED from best fit model',
type=int)
parser.add_argument(
'--adaptive',
default=0,
help='Use adaptive binning for minute scale light curves',
type=int)
parser.add_argument('--srcprob', default = 0,
help='Calculate the source probability for the photons,' \
' only works when no sub orbit time scales are used',
type=int)
parser.add_argument(
'--mincounts',
default=2,
help='Minimum number of counts within LC bin to run analysis',
type=int)
parser.add_argument('--simulate', default = None,
help='None or full path to yaml file which contains src name' \
'and spec to be simulated',
)
parser.add_argument(
'--make_plots',
default=0,
type=int,
help='Create sed plot',
)
parser.add_argument(
'--randomize',
default=1,
help=
'If you simulate, use Poisson realization. If false, use Asimov data set',
type=int)
args = parser.parse_args()
utils.init_logging('DEBUG')
config = yaml.load(open(args.conf))
tmpdir, job_id = lsf.init_lsf()
if not job_id:
job_id = args.i
logging.info('tmpdir: {0:s}, job_id: {1:n}'.format(tmpdir, job_id))
os.chdir(tmpdir) # go to tmp directory
logging.info('Entering directory {0:s}'.format(tmpdir))
logging.info('PWD is {0:s}'.format(os.environ["PWD"]))
# copy the ft1,ft2 and ltcube files
#for k in ['evfile','scfile','ltcube']:
# don't stage them, done automatically by fermipy if needed
# config[k] = utils.copy2scratch(config[k], tmpdir)
# set the scratch directories
logging.debug(config['data'])
config['fileio']['scratchdir'] = tmpdir
# set the log file
logdir = copy.deepcopy(config['fileio']['logfile'])
config['fileio']['logfile'] = path.join(tmpdir, 'fermipy.log')
# debugging: all files will be saved (default is False)
#config['fileio']['savefits'] = True
# if simulating an orbit, save fits files
if args.simulate is not None:
config['fileio']['savefits'] = True
# copy all fits files already present in outdir
# run the analysis
lc_config = copy.deepcopy(config['lightcurve'])
fit_config = copy.deepcopy(config['fit_pars'])
# remove parameters from config file not accepted by fermipy
for k in ['configname', 'tmp', 'log', 'fit_pars']:
config.pop(k, None)
if 'adaptive' in config['lightcurve'].keys():
config['lightcurve'].pop('adaptive', None)
# set the correct time bin
config['selection']['tmin'], config['selection']['tmax'], nj = set_lc_bin(
config['selection']['tmin'],
config['selection']['tmax'],
config['lightcurve']['binsz'],
job_id - 1 if job_id > 0 else 0,
ft1=config['data']['evfile'])
logging.debug('setting light curve bin' + \
'{0:n}, between {1[tmin]:.0f} and {1[tmax]:.0f}'.format(job_id, config['selection']))
if args.adaptive:
config['fileio']['outdir'] = utils.mkdir(
path.join(config['fileio']['outdir'],
'adaptive{0:.0f}/'.format(lc_config['adaptive'])))
if args.state == 'setup':
config['fileio']['outdir'] = utils.mkdir(
path.join(config['fileio']['outdir'],
'setup{0:05n}/'.format(job_id if job_id > 0 else 1)))
else:
config['fileio']['outdir'] = utils.mkdir(
path.join(config['fileio']['outdir'],
'{0:05n}/'.format(job_id if job_id > 0 else 1)))
logging.info('Starting with fermipy analysis')
logging.info('using fermipy version {0:s}'.format(fermipy.__version__))
logging.info('located at {0:s}'.format(fermipy.__file__))
if config['data']['ltcube'] == '':
config['data'].pop('ltcube', None)
compute_sub_gti_lc = False
if type(config['lightcurve']['binsz']) == str:
if len(config['lightcurve']['binsz'].strip('gti')):
compute_sub_gti_lc = True
if config['lightcurve']['binsz'].find('min') > 0:
config['lightcurve']['binsz'] = float(
config['lightcurve']['binsz'].strip('gti').strip(
'min')) * 60.
logging.info("set time bin length to {0:.2f}s".format(
config['lightcurve']['binsz']))
else:
config['lightcurve']['binsz'] = 3. * 3600.
try:
gta = GTAnalysis(config, logging={'verbosity': 3})
except Exception as e:
logging.error("{0}".format(e))
config['selection']['target'] = None
gta = GTAnalysis(config, logging={'verbosity': 3})
sep = gta.roi.sources[0]['offset']
logging.warning(
"Source closets to ROI center is {0:.3f} degree away".format(sep))
if sep < 0.1:
config['selection']['target'] = gta.roi.sources[0]['name']
gta.config['selection']['target'] = config['selection']['target']
logging.info("Set target to {0:s}".format(
config['selection']['target']))
# stage the full time array analysis results to the tmp dir
# do not copy png images
files = [
fn for fn in glob(fit_config['avgspec'])
if fn.find('.xml') > 0 or fn.find('.npy') > 0
]
files += [config['data']['evfile']]
utils.copy2scratch(files, gta.workdir)
# we're using actual data
if args.simulate is None:
# check before the analysis start if there are any events in the master file
# in the specified time range
logging.info('Checking for events in initial ft1 file')
t = Table.read(path.join(gta.workdir,
path.basename(config['data']['evfile'])),
hdu='EVENTS')
logging.info("times in base ft1: {0} {1} {2}".format(
t["TIME"].max(), t["TIME"].min(),
t["TIME"].max() - t["TIME"].min()))
m = (t["TIME"] >= config['selection']['tmin']) & (
t["TIME"] <= config['selection']['tmax'])
if np.sum(m) < args.mincounts + 1:
logging.error(
"*** Only {0:n} events between tmin and tmax! Exiting".format(
np.sum(m)))
assert np.sum(m) > args.mincounts
else:
logging.info("{0:n} events between tmin and tmax".format(
np.sum(m)))
# check how many bins are in each potential light curve bin
if compute_sub_gti_lc:
# select time of first and last
# photon instead of GTI time
m = (t["TIME"] >= config['selection']['tmin']) & \
(t["TIME"] <= config['selection']['tmax'])
tmin = t["TIME"][m].min() - 1.
tmax = t["TIME"][m].max() + 1.
logging.info("There will be up to {0:n} time bins".format(np.ceil(
(tmax - tmin) / \
config['lightcurve']['binsz'])))
bins = np.arange(tmin, tmax, config['lightcurve']['binsz'])
bins = np.concatenate([bins, [config['selection']['tmax']]])
counts = calc_counts(t, bins)
# remove the starting times of the bins with zero counts
# and rebin the data
logging.info("Counts before rebinning: {0}".format(counts))
mincounts = 10.
mc = counts < mincounts
if np.sum(mc):
# remove trailing zeros
if np.any(counts == 0.):
mcounts_post, mcounts_pre = rm_trailing_zeros(counts)
counts = counts[mcounts_post & mcounts_pre]
bins = np.concatenate([
bins[:-1][mcounts_post & mcounts_pre],
[bins[1:][mcounts_post & mcounts_pre].max()]
])
bins = rebin(counts, bins)
logging.info("Bin lengths after rebinning: {0}".format(
np.diff(bins)))
logging.info("Bin times after rebinning: {0}".format(bins))
counts = calc_counts(t, bins)
logging.info("Counts after rebinning: {0}".format(counts))
else:
logging.info("Regular time binning will be used")
bins = list(bins)
logging.info('Running fermipy setup')
try:
gta.setup()
except (RuntimeError, IndexError) as e:
logging.error(
'Caught Runtime/Index Error while initializing analysis object')
logging.error('Printing error:')
logging.error(e)
if e.message.find("File not found") >= 0 and e.message.find(
'srcmap') >= 0:
logging.error("*** Srcmap calculation failed ***")
if e.message.find("NDSKEYS") >= 0 and e.message.find('srcmap') >= 0:
logging.error(
"*** Srcmap calculation failed with NDSKEYS keyword not found in header ***"
)
logging.info("Checking if there are events in ft1 file")
ft1 = path.join(gta.workdir, 'ft1_00.fits')
f = glob(ft1)
if not len(f):
logging.error(
"*** no ft1 file found at location {0:s}".format(ft1))
raise
t = Table.read(f[0], hdu='EVENTS')
if not len(t):
logging.error("*** The ft1 file contains no events!! ***".format(
len(t)))
else:
logging.info("The ft1 file contains {0:n} event(s)".format(len(t)))
return
# end here if you only want to calulate
# intermediate fits files
if args.state == 'setup':
return gta
logging.info('Loading the fit for the average spectrum')
gta.load_roi('avgspec') # reload the average spectral fit
logging.info('Running fermipy optimize and fit')
# we're using actual data
if args.simulate is None:
if args.forcepl:
gta = set_src_spec_pl(
gta, gta.get_source_name(config['selection']['target']))
# to do add EBL absorption at some stage ...
# gta = add_ebl_atten(gta, gta.get_source_name(config['selection']['target']), fit_config['z'])
# make sure you are fitting data
gta.simulate_roi(restore=True)
if compute_sub_gti_lc:
if args.adaptive:
# do import only here since root must be compiled
from fermiAnalysis import adaptivebinning as ab
# compute the exposure
energy = 1000.
texp, front, back = ab.comp_exposure_phi(gta, energy=1000.)
# compute the bins
result = ab.time_bins(
gta,
texp,
0.5 * (front + back),
#critval = 20., # bins with ~20% unc
critval=lc_config['adaptive'],
Epivot=None, # compute on the fly
# tstart = config['selection']['tmin'],
# tstop = config['selection']['tmax']
)
# cut the bins to this GTI
mask = result['tstop'] > config['selection']['tmin']
mask = mask & (result['tstart'] < config['selection']['tmax'])
# try again with catalog values
if not np.sum(mask):
logging.error(
"Adaptive bins outside time window, trying catalog values for flux"
)
result = ab.time_bins(
gta,
texp,
0.5 * (front + back),
critval=lc_config['adaptive'], # bins with ~20% unc
Epivot=None, # compute on the fly
forcecatalog=True,
# tstart = config['selection']['tmin'],
# tstop = config['selection']['tmax']
)
# cut the bins to this GTI
mask = result['tstop'] > config['selection']['tmin']
mask = mask & (result['tstart'] <
config['selection']['tmax'])
if not np.sum(mask):
logging.error(
"Adaptive bins do not cover selected time interval!"
)
logging.error("Using original bins")
else:
bins = np.concatenate((result['tstart'][mask],
[result['tstop'][mask][-1]]))
bins[0] = np.max(
[config['selection']['tmin'], bins[0]])
bins[-1] = np.min(
[config['selection']['tmax'], bins[-1]])
bins = list(bins)
# removing trailing zeros
counts = calc_counts(t, bins)
mcounts_post, mcounts_pre = rm_trailing_zeros(counts)
logging.info(
"count masks: {0} {1}, bins: {2}, counts: {3}".
format(mcounts_post, mcounts_pre, bins, counts))
counts = counts[mcounts_post & mcounts_pre]
bins = np.concatenate([
np.array(bins)[:-1][mcounts_post & mcounts_pre],
[
np.array(bins)[1:][mcounts_post
& mcounts_pre].max()
]
])
logging.info(
"Using bins {0}, total n={1:n} bins".format(
bins,
len(bins) - 1))
logging.info("bins widths : {0}".format(np.diff(bins)))
logging.info("counts per bin: {0} ".format(
calc_counts(t, bins)))
bins = list(bins)
# TODO: test that this is working also with GTIs that have little or no counts
lc = gta.lightcurve(
config['selection']['target'],
binsz=config['lightcurve']['binsz'],
free_background=config['lightcurve']['free_background'],
free_params=config['lightcurve']['free_params'],
free_radius=config['lightcurve']['free_radius'],
make_plots=False,
multithread=True,
nthread=4,
#multithread = False,
#nthread = 1,
save_bin_data=True,
shape_ts_threshold=16.,
use_scaled_srcmap=True,
use_local_ltcube=True,
write_fits=True,
write_npy=True,
time_bins=bins,
outdir='{0:.0f}s'.format(config['lightcurve']['binsz']))
else:
# run the fitting of the entire time and energy range
try:
o = gta.optimize() # perform an initial fit
logging.debug(o)
except RuntimeError as e:
logging.error("Error in optimize: {0}".format(e))
logging.info("Trying to continue ...")
gta = set_free_pars_lc(gta, config, fit_config)
f = gta.fit()
if 'fix_sources' in fit_config.keys():
skip = fit_config['fix_sources'].keys()
else:
skip = []
gta, f = refit(gta,
config['selection']['target'],
f,
fit_config['ts_fixed'],
skip=skip)
gta.print_roi()
gta.write_roi('lc')
if args.createsed:
if args.make_plots:
init_matplotlib_backend()
gta.load_roi('lc') # reload the average spectral fit
logging.info('Running sed for {0[target]:s}'.format(
config['selection']))
sed = gta.sed(config['selection']['target'],
prefix = 'lc_sed',
free_radius = None if config['sed']['free_radius'] == 0. \
else config['sed']['free_radius'],
free_background= config['sed']['free_background'],
free_pars = fa.allnorm,
make_plots = args.make_plots,
cov_scale = config['sed']['cov_scale'],
use_local_index = config['sed']['use_local_index'],
bin_index = config['sed']['bin_index']
)
# debugging: calculate sed and resid maps for each light curve bin
#logging.info('Running sed for {0[target]:s}'.format(config['selection']))
#sed = gta.sed(config['selection']['target'], prefix = 'lc')
#model = {'Scale': 1000., 'Index' : fit_config['new_src_pl_index'], 'SpatialModel' : 'PointSource'}
#resid_maps = gta.residmap('lc',model=model, make_plots=True, write_fits = True, write_npy = True)
if args.srcprob:
logging.info("Running srcprob with srcmdl {0:s}".format('lc'))
gta.compute_srcprob(xmlfile='lc', overwrite=True)
# we are simulating a source
else:
# TODO: I probably have to run the setup here. Do on weekly files, i.e., no time cut? Only do that later?
with open(args.simulate) as f:
simsource = np.load(f, allow_pickle=True).flat[0]
# set the source to the simulation value
gta.set_source_spectrum(
simsource['target'],
spectrum_type=simsource['spectrum_type'],
spectrum_pars=simsource['spectrum_pars'][job_id - 1])
logging.info("changed spectral parameters to {0}".format(
gta.roi.get_source_by_name(simsource['target']).spectral_pars))
# simulate the ROI
gta.simulate_roi(randomize=bool(args.randomize))
gta = set_free_pars_lc(gta, config, fit_config)
# fit the simulation
f = gta.fit()
gta, f = refit(gta, config['selection']['target'], f,
fit_config['ts_fixed'])
gta.print_roi()
gta.write_roi('lc_simulate_{0:s}'.format(simsource['suffix']))
return gta
gta.setup(overwrite = True)
#first optimization run with output
fit_res = gta.optimize()
gta.write_roi('fit_optimize')
#free parameters for full likelihood fit
gta.free_sources(pars='norm')
gta.free_sources(distance = 3.0)
gta.free_source('galdiff')
gta.free_source('isodiff')
#do the likelihood fit
fit_results = gta.fit()
if fit_results['fit_success']!=True:
gta.load_roi('fit_optimize.npy')
gta.free_sources(free=False)
gta.free_sources(pars='norm', distance = 3.0)
gta.free_sources(distance = 1.)
gta.free_source('galdiff')
gta.free_source('isodiff')
fit_res2 = gta.fit()
if fit_results['fit_success']!=True:
gta.load_roi('fit_optimize.npy')
gta.free_sources(free=False)
gta.free_sources(pars='norm', distance = 1.5)
gta.free_sources(distance = 0.5)
gta.free_source('galdiff')
gta.free_source('isodiff')
def main():
usage = "usage: %(prog)s [config file]"
description = "Run fermipy analysis chain."
parser = argparse.ArgumentParser(usage=usage, description=description)
parser.add_argument('--config', default='sample_config.yaml')
parser.add_argument('--source', default=None)
args = parser.parse_args()
gta = GTAnalysis(args.config,
logging={'verbosity': 3},
fileio={'workdir_regex': '\.xml$|\.npy$'})
model0 = {'SpatialModel': 'PointSource', 'Index': 1.5}
model1 = {'SpatialModel': 'PointSource', 'Index': 2.0}
model2 = {'SpatialModel': 'PointSource', 'Index': 2.7}
src_name = gta.config['selection']['target']
gta.setup(overwrite=True)
gta.free_sources(False)
gta.print_roi()
gta.optimize()
gta.print_roi()
exclude = []
# Localize all point sources
for s in sorted(gta.roi.sources, key=lambda t: t['ts'], reverse=True):
# for s in gta.roi.sources:
if not s['SpatialModel'] == 'PointSource':
continue
if s['offset_roi_edge'] > -0.1:
continue
if s.name in exclude:
continue
if not '3FGL' in s.name:
continue
if s.name == src_name:
continue
gta.localize(s.name,
nstep=5,
dtheta_max=0.5,
update=True,
prefix='base',
make_plots=True)
gta.optimize()
gta.print_roi()
gta.write_roi('base_roi', make_plots=True)
exclude = [src_name]
if not 'carina_2' in exclude:
exclude += ['carina_2']
if not 'carina_3' in exclude:
exclude += ['carina_3']
gta.tsmap('base', model=model0, make_plots=True, exclude=exclude)
gta.residmap('base', model=model0, make_plots=True, exclude=exclude)
gta.tsmap('base', model=model1, make_plots=True, exclude=exclude)
gta.residmap('base', model=model1, make_plots=True, exclude=exclude)
gta.tsmap('base', model=model2, make_plots=True, exclude=exclude)
gta.residmap('base', model=model2, make_plots=True, exclude=exclude)
gta.find_sources(sqrt_ts_threshold=5.0)
gta.optimize()
gta.print_roi()
gta.print_params()
gta.free_sources(skydir=gta.roi.skydir, distance=1.0, pars='norm')
gta.fit()
gta.print_roi()
gta.print_params()
gta.write_roi('fit0_roi', make_plots=True)
m = gta.tsmap('fit0', model=model0, make_plots=True, exclude=exclude)
gta.plotter.make_tsmap_plots(m, gta.roi, zoom=2, suffix='tsmap_zoom')
gta.residmap('fit0', model=model0, make_plots=True, exclude=exclude)
gta.tsmap('fit0', model=model1, make_plots=True, exclude=exclude)
gta.plotter.make_tsmap_plots(m, gta.roi, zoom=2, suffix='tsmap_zoom')
gta.residmap('fit0', model=model1, make_plots=True, exclude=exclude)
gta.tsmap('fit0', model=model2, make_plots=True, exclude=exclude)
gta.plotter.make_tsmap_plots(m, gta.roi, zoom=2, suffix='tsmap_zoom')
gta.residmap('fit0', model=model2, make_plots=True, exclude=exclude)
gta.sed(src_name, prefix='fit0', make_plots=True, free_radius=1.0)
gta.free_source(src_name)
gta.fit(reoptimize=True)
gta.print_roi()
gta.print_params()
gta.write_roi('fit1_roi', make_plots=True)
def main():
usage = "usage: %(prog)s [config file]"
description = "Run fermipy analysis chain."
parser = argparse.ArgumentParser(usage=usage,description=description)
parser.add_argument('--config', default = 'sample_config.yaml')
parser.add_argument('--source', default = None)
args = parser.parse_args()
gta = GTAnalysis(args.config,logging={'verbosity' : 3},
fileio={'workdir_regex' : '\.xml$|\.npy$'})
gta.setup()
names = [s.name for s in gta.roi.sources if not s.diffuse]
gta.reload_sources(names)
sqrt_ts_threshold=3
model0 = { 'SpatialModel' : 'PointSource', 'Index' : 1.5 }
model1 = { 'SpatialModel' : 'PointSource', 'Index' : 2.0 }
model2 = { 'SpatialModel' : 'PointSource', 'Index' : 2.5 }
#src_name = gta.roi.sources[0].name
if args.source is None:
src_name = gta.config['selection']['target']
else:
src_name = args.source
# -----------------------------------
# Fit the Baseline Model
# -----------------------------------
# Get a reasonable starting point for the spectral model
gta.free_source(src_name)
gta.fit()
gta.free_source(src_name,False)
gta.optimize()
# Localize 3FGL sources
for s in gta.roi.sources:
if not s['SpatialModel'] == 'PointSource':
continue
if s['offset'] < 0.5 or s['ts'] < 25.:
continue
if s['offset_roi_edge'] > -0.1:
continue
gta.localize(s.name,nstep=5,dtheta_max=0.5,update=True,
prefix='base')
gta.free_source(s.name,False)
gta.tsmap('base',model=model1)
# Look for new point sources outside the inner 1.0 deg
gta.find_sources('base',model=model1,
search_skydir=gta.roi.skydir,
max_iter=5,min_separation=0.5,
sqrt_ts_threshold=sqrt_ts_threshold,
search_minmax_radius=[1.0,None])
gta.optimize()
gta.print_roi()
gta.write_roi('base')
# -----------------------------------
# Pass 0 - Source at Nominal Position
# -----------------------------------
fit_region(gta,'fit0',src_name)
# -------------------------------------
# Pass 1 - Source at Localized Position
# -------------------------------------
gta.localize(src_name,nstep=5,dtheta_max=0.5,update=True,
prefix='fit1')
fit_region(gta,'fit1',src_name)
fit_halo(gta,'fit1',src_name)
gta.load_roi('fit1')
# -------------------------------------
# Pass 2 - 2+ Point Sources
# -------------------------------------
srcs = []
# Fit up to 4 sources
for i in range(2,6):
srcs_fit = gta.find_sources('fit%i'%i,
search_skydir=gta.roi.skydir,
max_iter=1,
sources_per_iter=1,
sqrt_ts_threshold=3,
min_separation=0.5,
search_minmax_radius=[None,1.0])
if len(srcs_fit['sources']) == 0:
break
srcs += srcs_fit['sources']
best_fit_idx = i
gta.localize(src_name,nstep=5,dtheta_max=0.4,
update=True,prefix='fit%i'%i)
# Relocalize new sources
for s in sorted(srcs, key=lambda t: t['ts'],reverse=True):
gta.localize(s.name,nstep=5,dtheta_max=0.4,
update=True,prefix='fit%i'%i)
fit_region(gta,'fit%i'%i,src_name)
fit_halo(gta,'fit%i'%i,src_name)
gta.load_roi('fit%i'%i)
new_source_data = []
for s in srcs:
src_data = gta.roi[s.name].data
new_source_data.append(copy.deepcopy(src_data))
np.save(os.path.join(gta.workdir,'new_source_data.npy'),
new_source_data)
gta = GTAnalysis(args.config)
gta.setup()
# Iteratively optimize all components in the ROI
gta.optimize()
# Fix sources w/ TS < 10
gta.free_sources(minmax_ts=[None, 10], free=False)
# Free sources within 3 degrees of ROI center
gta.free_sources(distance=3.0)
# Free sources by name
gta.free_source('mkn421')
gta.free_source('galdiff')
gta.free_source('isodiff')
# Free only the normalization of a specific source
gta.free_norm('3FGL J1129.0+3705')
gta.fit()
# Compute the SED for a source
gta.sed('mkn421')
# Write the current state of the ROI model -- this will generate XML
# model files for each component as well as an output analysis
# dictionary in numpy and yaml formats
gta.write_roi('fit1')
def main(cmd_line):
#takes integer arguement specifying the simulation number
sim = cmd_line[1]
indir = "/zfs/astrohe/ckarwin/Machine_Learning_GC/Sim_2/Dame_Maps/"
outdir = indir + "Simulation_Output/sim_%s" % sim
if (os.path.isdir(outdir) == True):
shutil.rmtree(outdir)
os.system('mkdir %s' % outdir)
os.chdir(outdir)
#A single simulation should first be ran, which will generate all the needed data products that can be reused for subsequent simulations.
#The data products that are copied below are for subsequent simulations after the first run.
shutil.copy2('%s/srcmap_00.fits' % indir, 'srcmap_00.fits')
shutil.copy2('%s/bexpmap_00.fits' % indir, 'bexpmap_00.fits')
shutil.copy2('%s/ccube_00.fits' % indir, 'ccube_00.fits')
shutil.copy2('%s/config.yaml' % indir, 'config.yaml')
shutil.copy2('%s/ft1_00.fits' % indir, 'ft1_00.fits')
shutil.copy2('%s/LAT_Final_Excess_Template.fits' % indir,
'LAT_Final_Excess_Template.fits')
#setup analysis:
gta = GTAnalysis('config.yaml', logging={'verbosity': 3})
gta.setup()
#gta.load_roi("after_setup")
#set components to zero for simulations:
gta.set_norm("MapSource", 0.0) #excess template
gta.set_norm("galdiff04", 0.0) #CO12_0-5
gta.set_norm("galdiff05", 0.0) #CO12_6-9
gta.set_norm("galdiff06", 0.0) #CO12_10-12
gta.set_norm("galdiff07", 0.0) #CO12_13-16
#run simulations:
gta.write_roi('before_sim')
gta.simulate_roi(randomize=True)
#delete sources that were simulated:
gta.delete_source("galdiff00", delete_source_map=False)
gta.delete_source("galdiff01", delete_source_map=False)
gta.delete_source("galdiff02", delete_source_map=False)
gta.delete_source("galdiff03", delete_source_map=False)
#set random normalizations of sources for performing fit:
#n4 = np.random.normal(1.0,0.2)
#n5 = np.random.normal(1.0,0.2)
#n6 = np.random.normal(1.0,0.2)
#nms = np.random.normal(1e-4,0.5e-4)
gta.set_norm("galdiff04", 0.8)
gta.set_norm("galdiff05", 0.8)
gta.set_norm("galdiff06", 1.2)
gta.set_norm("galdiff07", 1.2)
#perform fit for null hypothesis:
gta.free_sources(free=True)
gta.free_source("galdiff07", free=False)
gta.free_source("MapSource", free=False)
Fit = gta.fit()
null = Fit["loglike"]
gta.write_roi('after_null_fit')
gta.write_model_map("null_model")
#set normalizations of sources for performing alternative fit:
gta.set_norm("galdiff04", 0.8)
gta.set_norm("galdiff05", 0.8)
gta.set_norm("galdiff06", 1.2)
gta.set_norm("galdiff07", 1.2)
gta.set_norm("MapSource", 1e-4)
gta.free_sources(free=True)
#gta.free_source("galdiff07",free=False)
Fit2 = gta.fit()
alternative = Fit2["loglike"]
gta.write_roi('after_alternative_fit')
gta.write_model_map("alternative_model")
#calculate source spectrum:
ltcube = '/zfs/astrohe/ckarwin/Stacking_Analysis/UFOs/NGC_4151_Analysis/MakeLTCube/zmax_105/UFOs_binned_ltcube.fits'
obs = BinnedObs(srcMaps='srcmap_00.fits',
expCube=ltcube,
binnedExpMap='bexpmap_00.fits',
irfs='P8R3_SOURCE_V2')
like = BinnedAnalysis(obs,
'after_alternative_fit_00.xml',
optimizer='MINUIT')
Elist, Flist = CalcFlux(like, 'MapSource')
data = {"energ[MeV]": Elist, "flux[MeV/cm^2/s]": Flist}
df = pd.DataFrame(data=data)
df.to_csv("excess_flux.dat", sep="\t", index=False)
#calculte TS:
TS = -2 * (null - alternative)
#write results:
savefile = "TS_sim_%s.txt" % sim
f = open(savefile, "w")
f.write(str(TS))
f.close()
#rm ft file to reduce storage:
os.system('rm ft1_00.fits')
return
config['fileio']['outdir'] = cwd+'/fits'
config['fileio']['logfile'] = cwd+'/fits/fermipy.log'
config['data']['ltcube'] = cwd+'/fits/ltcube_00.fits'
config['model']['galdiff'] = path_to_conda+'/share/fermitools/refdata/fermi/galdiffuse/gll_iem_v07.fits'
config['model']['isodiff'] = path_to_conda+'/share/fermitools/refdata/fermi/galdiffuse/iso_P8R3_SOURCE_V3_v1.txt'
config['logging']['verbosity'] = 4
source = config['selection']['target']
with open(cwd+'/config_modified.yaml', 'w') as o:
yaml.dump(config, o)
likelihoods = np.zeros((5))
gta = GTAnalysis(config='config_modified.yaml')
gta.setup()
model = {'Index' : 2.0, 'SpatialModel' : 'PointSource'}
for i in range(1,6):
gta.optimize()
gta.free_sources(free=False)
gta.free_source(source)
gta.free_source('galdiff')
gta.free_source('isodiff')
gta.free_sources(distance=3, pars='norm')
gta.free_sources(minmax_ts=[100, None], pars='norm')
gta.fit(optimizer='NEWMINUIT', reoptimize=True)
maps = gta.residmap(f'../maps/opt_alternating{i}', model=model, make_plots=True)
maps = gta.tsmap(f'../maps/opt_alternating_{i}', model=model, make_plots=True)
gta.write_roi(f'opt_{i}', make_plots=True)
likelihoods[i-1] = - gta.like()
np.savetxt('optimization_process_likes_alternating.dat', likelihoods)
def FGES_BinnedAnalysis(prefix, ANALYSISDIR, numsources, xmlsources, spectrum,
spectrumpoints, spectrumpointsUL, spectrum_mev_or_erg,
spectrum_mev_or_tev, configfile):
ANALYSISDIR = ANALYSISDIR + prefix + '/'
i = numsources #number of sources
sources_names = ''
for x in range(0, i):
sources_names += str(xmlsources[x])
#Run the likelihood analysis up to doing the fit
gta = GTAnalysis(ANALYSISDIR + configfile, logging={'verbosity': 3})
gta.setup()
#Print the pre likelihood fit parameters
gta.print_roi()
for x in range(0, i):
print(gta.roi[xmlsources[x]])
#Do an initial optimization of parameters
gta.optimize()
gta.print_roi()
#Prepare to get the likelihood
#Free the normalizations of sources within 7 degrees of the center of the field of view
gta.free_sources(distance=7.0, pars='norm')
gta.free_source('galdiff')
gta.free_source('isodiff')
for x in range(0, i):
gta.free_source(xmlsources[x])
#LIKELIHOOD ANALYSIS
fit_results = gta.fit()
#print out and return the results
print('Fit Quality: ', fit_results['fit_quality'])
for x in range(0, i):
print(gta.roi[xmlsources[x]])
gta.write_roi(sources_names + 'fit')
#RESIDUAL MAP
model = {'Index': 2.0, 'SpatialModel': 'PointSource'}
maps = gta.residmap('residual', model=model, make_plots=True)
# Generate residual map with source of interest removed from the model
model_nosource = {'Index': 2.0, 'SpatialModel': 'PointSource'}
maps_nosource = gta.residmap('residual_wsource',
model=model_nosource,
exclude=xmlsources,
make_plots=True)
#TS Map
tsmap = gta.tsmap('tsmap',
model={
'SpatialModel': 'PointSource',
'Index': 2.0
},
exclude=xmlsources,
make_plots=True)
tsmap_wSNR = gta.tsmap('tsmap_wSNR',
model={
'SpatialModel': 'PointSource',
'Index': 2.0
},
make_plots=True)
#PLOT SEDs
for x in range(0, i):
c = np.load('10to500gev/' + sources_names + 'fit.npy').flat[0]
sorted(c['sources'].keys())
c['sources'][xmlsources[x]]['flux']
print(c['sources'][xmlsources[x]]['param_names'][:4])
print(c['sources'][xmlsources[x]]['param_values'][:4])
c['sources'][xmlsources[x]]['ts']
E = np.array(c['sources'][xmlsources[x]]['model_flux']['energies'])
dnde = np.array(c['sources'][xmlsources[x]]['model_flux']['dnde'])
dnde_hi = np.array(
c['sources'][xmlsources[x]]['model_flux']['dnde_hi'])
dnde_lo = np.array(
c['sources'][xmlsources[x]]['model_flux']['dnde_lo'])
if spectrum_mev_or_erg == "erg":
suffix = 'erg'
mult = 0.00000160218
elif spectrum_mev_or_erg == "mev":
suffix = 'MeV'
mult = 1
if spectrum_mev_or_tev == "mev":
xaxis = 'MeV'
denominator = 1
elif spectrum_mev_or_tev == "tev":
xaxis = 'TeV'
denominator = 1000000
if spectrum:
plt.loglog(E, (E**2) * dnde, 'k--')
plt.loglog(E, (E**2) * dnde_hi, 'k')
plt.loglog(E, (E**2) * dnde_lo, 'k')
plt.xlabel('E [MeV]')
plt.ylabel(r'E$^2$ dN/dE [MeV cm$^{-2}$ s$^{-1}$]')
plt.savefig('spectrum_' + xmlsources[x] + '.png')
#GET SED POINTS
if spectrumpoints:
sed = gta.sed(xmlsources[x], make_plots=True)
#sed = gta.sed(xmlsource,prefix=xmlsource + 'spectrum',loge_bins=)
src = gta.roi[xmlsources[x]]
#Plot without upper limits
plt.loglog(E, (E**2) * dnde, 'k--')
plt.loglog(E, (E**2) * dnde_hi, 'k')
plt.loglog(E, (E**2) * dnde_lo, 'k')
plt.errorbar(np.array(sed['e_ctr']),
sed['e2dnde'],
yerr=sed['e2dnde_err'],
fmt='o')
plt.xlabel('E [MeV]')
plt.ylabel(r'E$^{2}$ dN/dE [MeV cm$^{-2}$ s$^{-1}$]')
#plt.show()
plt.savefig('spectrumpoints_' + xmlsources[x] + '.png')
#Plot with upper limits, last 5 points
plt.loglog(E, (E**2) * dnde, 'k--')
plt.loglog(E, (E**2) * dnde_hi, 'k')
plt.loglog(E, (E**2) * dnde_lo, 'k')
plt.errorbar(sed['e_ctr'][:-5],
sed['e2dnde'][:-5],
yerr=sed['e2dnde_err'][:-5],
fmt='o')
plt.errorbar(np.array(sed['e_ctr'][-5:]),
sed['e2dnde_ul95'][-5:],
yerr=0.2 * sed['e2dnde_ul95'][-5:],
fmt='o',
uplims=True)
plt.xlabel('E [MeV]')
plt.ylabel(r'E$^{2}$ dN/dE [MeV cm$^{-2}$ s$^{-1}$]')
plt.savefig('spectrumpointsUL_' + xmlsources[x] + '.png')
plt.clf()
def _process_lc_bin(itime, name, config, basedir, workdir, diff_sources, const_spectrum, roi, lck_params,
**kwargs):
i, time = itime
roi = copy.deepcopy(roi)
config = copy.deepcopy(config)
config['selection']['tmin'] = time[0]
config['selection']['tmax'] = time[1]
# create output directories labeled in MET vals
outdir = basedir + 'lightcurve_%.0f_%.0f' % (time[0], time[1])
config['fileio']['outdir'] = os.path.join(workdir, outdir)
config['logging']['prefix'] = 'lightcurve_%.0f_%.0f ' % (time[0], time[1])
config['fileio']['logfile'] = os.path.join(config['fileio']['outdir'],
'fermipy.log')
utils.mkdir(config['fileio']['outdir'])
yaml.dump(utils.tolist(config),
open(os.path.join(config['fileio']['outdir'],
'config.yaml'), 'w'))
xmlfile = os.path.join(config['fileio']['outdir'], 'base.xml')
try:
from fermipy.gtanalysis import GTAnalysis
gta = GTAnalysis(config, roi, loglevel=logging.DEBUG)
gta.logger.info('Fitting time range %i %i' % (time[0], time[1]))
gta.setup()
except:
print('Analysis failed in time range %i %i' %
(time[0], time[1]))
print(sys.exc_info()[0])
raise
return {}
gta._lck_params = lck_params
# Recompute source map for source of interest and sources within 3 deg
if gta.config['gtlike']['use_scaled_srcmap']:
names = [s.name for s in
gta.roi.get_sources(distance=3.0, skydir=gta.roi[name].skydir)
if not s.diffuse]
gta.reload_sources(names)
# Write the current model
gta.write_xml(xmlfile)
# Optimize the model
gta.optimize(skip=diff_sources,
shape_ts_threshold=kwargs.get('shape_ts_threshold'))
fit_results = _fit_lc(gta, name, **kwargs)
gta.write_xml('fit_model_final.xml')
srcmodel = copy.deepcopy(gta.get_src_model(name))
numfree = gta.get_free_param_vector().count(True)
const_srcmodel = gta.get_src_model(name).copy()
fixed_fit_results = fit_results.copy()
fixed_srcmodel = gta.get_src_model(name).copy()
fixed_fit_results['fit_success'],fixed_srcmodel['fit_success'] = [False,False]
fixed_fit_results['fit_quality'],fixed_srcmodel['fit_quality'] = [0,0]
max_ts_thresholds = [None, 4, 9, 16, 25]
for max_ts in max_ts_thresholds:
if max_ts is not None:
gta.free_sources(minmax_ts=[None, max_ts], free=False, exclude=[name])
# rerun fit using params from full time (constant) fit using same
# param vector as the successful fit to get loglike
specname, spectrum = const_spectrum
gta.set_source_spectrum(name, spectrum_type=specname,
spectrum_pars=spectrum,
update_source=False)
gta.free_source(name, free=False)
const_fit_results = gta.fit()
if not const_fit_results['fit_success']:
continue
const_srcmodel = gta.get_src_model(name)
# rerun using shape fixed to full time fit
# for the fixed-shape lightcurve
gta.free_source(name, pars='norm')
fixed_fit_results = gta.fit()
if not fixed_fit_results['fit_success']:
continue
fixed_srcmodel = gta.get_src_model(name)
break
# special lc output
o = {'flux_const': const_srcmodel['flux'],
'loglike_const': const_fit_results['loglike'],
'fit_success': fit_results['fit_success'],
'fit_success_fixed': fixed_fit_results['fit_success'],
'fit_quality': fit_results['fit_quality'],
'fit_status': fit_results['fit_status'],
'num_free_params': numfree,
'config': config}
# full flux output
if fit_results['fit_success'] == 1:
for k in defaults.source_flux_output.keys():
if not k in srcmodel:
continue
o[k] = srcmodel[k]
o[k+'_fixed'] = fixed_srcmodel[k]
gta.logger.info('Finished time range %i %i' % (time[0], time[1]))
return o
def _process_lc_bin(itime, name, config, basedir, workdir, diff_sources, const_spectrum, roi, lck_params,
**kwargs):
i, time = itime
roi = copy.deepcopy(roi)
config = copy.deepcopy(config)
config['selection']['tmin'] = time[0]
config['selection']['tmax'] = time[1]
# create output directories labeled in MET vals
outdir = basedir + 'lightcurve_%.0f_%.0f' % (time[0], time[1])
config['fileio']['outdir'] = os.path.join(workdir, outdir)
config['logging']['prefix'] = 'lightcurve_%.0f_%.0f ' % (time[0], time[1])
config['fileio']['logfile'] = os.path.join(config['fileio']['outdir'],
'fermipy.log')
utils.mkdir(config['fileio']['outdir'])
yaml.dump(utils.tolist(config),
open(os.path.join(config['fileio']['outdir'],
'config.yaml'), 'w'))
xmlfile = os.path.join(config['fileio']['outdir'], 'base.xml')
try:
from fermipy.gtanalysis import GTAnalysis
gta = GTAnalysis(config, roi, loglevel=logging.DEBUG)
gta.logger.info('Fitting time range %i %i' % (time[0], time[1]))
gta.setup()
except:
print('Analysis failed in time range %i %i' %
(time[0], time[1]))
print(sys.exc_info()[0])
raise
return {}
gta._lck_params = lck_params
# Recompute source map for source of interest and sources within 3 deg
if gta.config['gtlike']['use_scaled_srcmap']:
names = [s.name for s in
gta.roi.get_sources(distance=3.0, skydir=gta.roi[name].skydir)
if not s.diffuse]
gta.reload_sources(names)
# Write the current model
gta.write_xml(xmlfile)
# Optimize the model
gta.optimize(skip=diff_sources,
shape_ts_threshold=kwargs.get('shape_ts_threshold'))
fit_results = _fit_lc(gta, name, **kwargs)
gta.write_xml('fit_model_final.xml')
srcmodel = copy.deepcopy(gta.get_src_model(name))
numfree = gta.get_free_param_vector().count(True)
max_ts_thresholds = [None, 4, 9]
for max_ts in max_ts_thresholds:
if max_ts is not None:
gta.free_sources(minmax_ts=[None, max_ts], free=False, exclude=[name])
# rerun fit using params from full time (constant) fit using same
# param vector as the successful fit to get loglike
specname, spectrum = const_spectrum
gta.set_source_spectrum(name, spectrum_type=specname,
spectrum_pars=spectrum,
update_source=False)
gta.free_source(name, free=False)
const_fit_results = gta.fit()
if not const_fit_results['fit_success']:
continue
const_srcmodel = gta.get_src_model(name)
# rerun using shape fixed to full time fit
# for the fixed-shape lightcurve
gta.free_source(name, pars='norm')
fixed_fit_results = gta.fit()
if not fixed_fit_results['fit_success']:
continue
fixed_srcmodel = gta.get_src_model(name)
break
# special lc output
o = {'flux_const': const_srcmodel['flux'],
'loglike_const': const_fit_results['loglike'],
'fit_success': fit_results['fit_success'],
'fit_success_fixed': fixed_fit_results['fit_success'],
'fit_quality': fit_results['fit_quality'],
'fit_status': fit_results['fit_status'],
'num_free_params': numfree,
'config': config}
# full flux output
if fit_results['fit_success'] == 1:
for k in defaults.source_flux_output.keys():
if not k in srcmodel:
continue
o[k] = srcmodel[k]
o[k+'_fixed'] = fixed_srcmodel[k]
gta.logger.info('Finished time range %i %i' % (time[0], time[1]))
return o
class ExtensionFit:
def __init__(self, configFile):
self.gta = GTAnalysis(configFile, logging={'verbosity': 3})
self.target = None
self.targetRadius = None
self.distance = None
self.catalog = fits.getdata('/users-data/mfalxa/code/gll_psch_v13.fit',
1)
def setSourceName(self, sourceObject, newName):
self.gta.delete_source(sourceObject['name'])
self.gta.add_source(newName, sourceObject)
''' INITIALIZE '''
def initialize(self, sizeROI, rInner, addToROI, TSMin, debug):
self.gta.setup()
if self.gta.config['selection']['emin'] >= 10000:
self.gta.set_parameter('galdiff', 'Scale', 30000)
if debug == True:
self.gta.make_plots('startAll')
self.gta.residmap(prefix='startAll', make_plots=True)
# Get model source names
sourceList = self.gta.get_sources(exclude=['isodiff', 'galdiff'])
# Delete sources unassociated with TS < 50
for i in range(len(sourceList)):
if sourceList[i]['catalog']['TS_value'] < TSMin and self.catalog[
'CLASS'][self.catalog['Source_Name'] == sourceList[i]
['name']][0] == '':
self.gta.delete_source(sourceList[i]['name'])
closests = self.gta.get_sources(distance=rInner,
exclude=['isodiff', 'galdiff'])
# Delete all unidentified sources
for i in range(len(closests)):
if self.catalog['CLASS'][self.catalog['Source_Name'] == closests[i]
['name']][0].isupper() == False:
self.gta.delete_source(closests[i]['name'])
if self.catalog['CLASS'][self.catalog['Source_Name'] == closests[i]
['name']][0] == 'SFR':
self.target = closests[i]
self.setSourceName(self.target, 'TESTSOURCE')
# If debug, save ROI and make plots
if debug == True:
self.gta.write_roi('startModel')
self.gta.residmap(prefix='start', make_plots=True)
self.gta.make_plots('start')
# Optmize spectral parameters for sources with npred > 1
self.gta.optimize(npred_threshold=1, skip=['isodiff'])
# Get model source names
sourceList = self.gta.get_sources(distance=sizeROI + addToROI,
square=True,
exclude=['isodiff', 'galdiff'])
# Iterate source localizing on source list
for i in range(len(sourceList)):
if sourceList[i].extended == False:
self.gta.localize(sourceList[i]['name'],
write_fits=False,
write_npy=False,
update=True)
# Free sources within ROI size + extra distance from center
self.gta.free_sources(distance=sizeROI + addToROI, square=True)
# Re-optimize ROI
self.gta.optimize(skip=['isodiff'])
# Save and make plots if debug
if debug == True:
self.gta.write_roi('modelInitialized')
self.gta.residmap(prefix='initialized', make_plots=True)
self.gta.make_plots('initialized')
# Lock sources
self.gta.free_sources(free=False)
''' OUTER REGION '''
def outerRegionAnalysis(self, sizeROI, rInner, sqrtTsThreshold,
minSeparation, debug):
self.gta.free_sources(distance=sizeROI,
pars='norm',
square=True,
free=True)
self.gta.free_sources(distance=rInner, free=False)
self.gta.free_source('galdiff', free=True)
self.gta.free_source('isodiff', free=False)
# Seek new sources until none are found
sourceModel = {
'SpectrumType': 'PowerLaw',
'Index': 2.0,
'Scale': 30000,
'Prefactor': 1.e-15,
'SpatialModel': 'PointSource'
}
newSources = self.gta.find_sources(sqrt_ts_threshold=sqrtTsThreshold,
min_separation=minSeparation,
model=sourceModel,
**{
'search_skydir':
self.gta.roi.skydir,
'search_minmax_radius':
[rInner, sizeROI]
})
if len(newSources) > 0:
for i in range(len(newSources)):
if newSources['sources'][i]['ts'] > 100.:
self.gta.set_source_spectrum(
newSources['sources'][i]['name'],
spectrum_type='LogParabola')
self.gta.free_source(newSources['sources'][i]['name'])
self.gta.fit()
self.gta.free_source(newSources['sources'][i]['name'],
free=False)
# Optimize all ROI
self.gta.optimize(skip=['isodiff'])
# Save sources found
if debug == True:
self.gta.residmap(prefix='outer', make_plots=True)
self.gta.write_roi('outerAnalysisROI')
self.gta.make_plots('outer')
''' INNER REGION '''
def innerRegionAnalysis(self, sizeROI, rInner, maxIter, sqrtTsThreshold,
minSeparation, dmMin, TSm1Min, TSextMin, debug):
self.gta.free_sources(distance=sizeROI, square=True, free=False)
self.gta.free_sources(distance=rInner, free=True, exclude=['isodiff'])
# Keep closest source if identified with star forming region in catalog or look for new source closest to center within Rinner
if self.target != None:
print('Closest source identified with star forming region : ',
self.target['name'])
self.gta.set_source_morphology('TESTSOURCE',
**{'spatial_model': 'PointSource'})
else:
closeSources = self.gta.find_sources(sqrt_ts_threshold=2.,
min_separation=minSeparation,
max_iter=1,
**{
'search_skydir':
self.gta.roi.skydir,
'search_minmax_radius':
[0., rInner]
})
dCenter = np.array([])
for i in range(len(closeSources['sources'])):
dCenter = np.append(
dCenter,
self.gta.roi.skydir.separation(
closeSources['sources'][i].skydir).value)
self.target = closeSources['sources'][np.argmin(dCenter)]
print('Target name : ', self.target['name'])
self.setSourceName(self.target, 'TESTSOURCE')
for i in [
x for x in range(len(closeSources['sources']))
if x != (np.argmin(dCenter))
]:
self.gta.delete_source(closeSources['sources'][i]['name'])
self.gta.optimize(skip=['isodiff'])
# Initialize n sources array
nSources = []
# Save ROI without extension fit
self.gta.write_roi('nSourcesFit')
if debug == True:
self.gta.make_plots('innerInit')
self.gta.residmap(prefix='innerInit', make_plots=True)
# Test for extension
extensionTest = self.gta.extension('TESTSOURCE',
make_plots=True,
write_npy=debug,
write_fits=debug,
spatial_model='RadialDisk',
update=True,
free_background=True,
fit_position=True)
extLike = extensionTest['loglike_ext']
TSext = extensionTest['ts_ext']
print('TSext : ', TSext)
extAIC = 2 * (len(self.gta.get_free_param_vector()) -
self.gta._roi_data['loglike'])
self.gta.write_roi('extFit')
if debug == True:
self.gta.residmap(prefix='ext0', make_plots=True)
self.gta.make_plots('ext0')
self.gta.load_roi('nSourcesFit', reload_sources=True)
for i in range(1, maxIter + 1):
# Test for n point sources
nSourcesTest = self.gta.find_sources(
sources_per_iter=1,
sqrt_ts_threshold=sqrtTsThreshold,
min_separation=minSeparation,
max_iter=1,
**{
'search_skydir': self.gta.roi.skydir,
'search_minmax_radius': [0., rInner]
})
if len(nSourcesTest['sources']) > 0:
if nSourcesTest['sources'][0]['ts'] > 100.:
self.gta.set_source_spectrum(
nSourcesTest['sources'][0]['name'],
spectrum_type='LogParabola')
self.gta.free_source(nSourcesTest['sources'][0]['name'])
self.gta.fit()
self.gta.free_source(nSourcesTest['sources'][0]['name'],
free=False)
if debug == True:
self.gta.make_plots('nSources' + str(i))
nSources.append(nSourcesTest['sources'])
self.gta.localize(nSourcesTest['sources'][0]['name'],
write_npy=debug,
write_fits=debug,
update=True)
nAIC = 2 * (len(self.gta.get_free_param_vector()) -
self.gta._roi_data['loglike'])
self.gta.free_source(nSourcesTest['sources'][0]['name'],
free=True)
self.gta.residmap(prefix='nSources' + str(i), make_plots=True)
self.gta.write_roi('n1SourcesFit')
# Estimate Akaike Information Criterion difference between both models
dm = extAIC - nAIC
print('AIC difference between both models = ', dm)
# Estimate TS_m+1
extensionTestPlus = self.gta.extension(
'TESTSOURCE',
make_plots=True,
write_npy=debug,
write_fits=debug,
spatial_model='RadialDisk',
update=True,
free_background=True,
fit_position=True)
TSm1 = 2 * (extensionTestPlus['loglike_ext'] - extLike)
print('TSm+1 = ', TSm1)
if debug == True:
self.gta.residmap(prefix='ext' + str(i), make_plots=True)
self.gta.make_plots('ext' + str(i))
if dm < dmMin and TSm1 < TSm1Min:
self.gta.load_roi('extFit', reload_sources=True)
break
else:
# Set extension test to current state and save current extension fit ROI and load previous nSources fit ROI
extensionTest = extensionTestPlus
extLike = extensionTestPlus['loglike_ext']
TSext = extensionTestPlus['ts_ext']
print('TSext : ', TSext)
extAIC = 2 * (len(self.gta.get_free_param_vector()) -
self.gta._roi_data['loglike'])
self.gta.write_roi('extFit')
self.gta.load_roi('n1SourcesFit', reload_sources=True)
self.gta.write_roi('nSourcesFit')
else:
if TSext > TSextMin:
self.gta.load_roi('extFit', reload_sources=True)
break
else:
self.gta.load_roi('nSourcesFit', reload_sources=True)
break
self.gta.fit()
# Get source radius depending on spatial model
endSources = self.gta.get_sources()
for i in range(len(endSources)):
if endSources[i]['name'] == 'TESTSOURCE':
self.target = endSources[i]
self.distance = self.gta.roi.skydir.separation(
endSources[i].skydir).value
if endSources[i].extended == True:
self.targetRadius = endSources[i]['SpatialWidth']
else:
self.targetRadius = endSources[i]['pos_r95']
''' CHECK OVERLAP '''
def overlapDisk(self, rInner, radiusCatalog):
print('Target radius : ', self.targetRadius)
# Check radius sizes
if radiusCatalog < self.targetRadius:
r = float(radiusCatalog)
R = float(self.targetRadius)
else:
r = float(self.targetRadius)
R = float(radiusCatalog)
# Estimating overlapping area
d = self.distance
print('Distance from center : ', d)
if d < (r + R):
if R < (r + d):
area = r**2 * np.arccos(
(d**2 + r**2 - R**2) / (2 * d * r)) + R**2 * np.arccos(
(d**2 + R**2 - r**2) / (2 * d * R)) - 0.5 * np.sqrt(
(-d + r + R) * (d + r - R) * (d - r + R) *
(d + r + R))
overlap = round((area / (np.pi * r**2)) * 100, 2)
else:
area = np.pi * r**2
overlap = 100.0
else:
area = 0.
overlap = 0.
print('Overlapping surface : ', area)
print('Overlap : ', overlap)
if overlap > 68. and self.distance < rInner:
associated = True
else:
associated = False
return associated
''' CHECK UPPER LIMIT '''
def upperLimit(self, name, radius):
sourceModel = {
'SpectrumType': 'PowerLaw',
'Index': 2.0,
'Scale': 30000,
'Prefactor': 1.e-15,
'SpatialModel': 'RadialDisk',
'SpatialWidth': radius,
'glon': self.gta.config['selection']['glon'],
'glat': self.gta.config['selection']['glat']
}
self.gta.add_source(name, sourceModel, free=True)
self.gta.fit()
self.gta.residmap(prefix='upperLimit', make_plots=True)
print('Upper limit : ', self.gta.get_sources()[0]['flux_ul95'])
f.write(os.path.join(od, 'ft1_00.fits') + '\n')
# modify base config to include merged files
with open(BASE_CONFIG) as infile, \
open(CONFIG_FINAL_FILE, 'w') as outfile:
config = yaml.load(infile)
config['data']['evfile'] = os.path.join(os.getcwd(), FT1_FILES_LIST)
config['data']['ltcube'] = os.path.join(os.getcwd(), LTCUBE_FINAL_FILE)
config['fileio'] = {'outdir': 'out_merged/'}
outfile.write('# Automatically merged from directories:\n')
for outdir in outdirs:
outfile.write('# {}\n'.format(outdir))
outfile.write('\n')
yaml.dump(config, outfile, indent=4)
# some generic processing just for sanity check
gta = GTAnalysis(CONFIG_FINAL_FILE, logging={'verbosity': 3})
gta.setup()
gta.free_source('4FGL J1512.8-0906', free=True, pars=['Index'])
gta.free_source('4FGL J1512.8-0906', free=True, pars='norm')
# Free Normalization of all Sources within 3 deg of ROI center
gta.free_sources(distance=3.0, pars='norm')
# Free all parameters of isotropic and galactic diffuse components
gta.free_source('galdiff')
gta.free_source('isodiff')
gta.optimize()
gta.print_roi()
fit_res = gta.fit()
print('Fit Quality: ', fit_res['fit_quality'])
print(gta.roi['4FGL J1512.8-0906'])