def __init__(self, signals=None, setmask=False):
"""
Initialize a new mask object.
:param signals:
List of signals to block
:param setmask:
A flag that controls if ``SIG_SETMASK`` should be used over
``SIG_BLOCK`` and ``SIG_UNBLOCK``. For details see :meth:`block()`
and :meth:`unblock()`.
.. note::
The masking function (``sigprocmask(2)`` or ``pthread_sigmask(3)``)
is not called until :meth:`block()` is called.
"""
if signals is None:
self._signals = frozenset()
else:
self._signals = frozenset(signals)
self._setmask = setmask
self._mask = sigset_t()
self._old_mask = None # old mask is only used for SIG_SETMASK
self._is_active = False
sigemptyset(self._mask)
for signal in self.signals:
sigaddset(self._mask, signal)
def get(cls):
"""
Use ``pthread_sigmask(2)`` to obtain the mask of blocked signals
:returns:
A fresh :class:`pthread_sigmask` object.
The returned object behaves as it was constructed with the list of
currently blocked signals, ``setmask=False`` and as if the
:meth:`block()` was immediately called.
That is, calling :meth:`unblock()` will will cause those signals not to
be blocked anymore while calling :meth:`block()` will re-block them (if
they were unblocked after this method returns).
"""
mask = sigset_t()
sigemptyset(mask)
_pthread_sigmask(0, None, mask)
signals = []
for sig_num in range(1, NSIG):
if sigismember(mask, sig_num):
signals.append(sig_num)
self = cls(signals)
self._is_active = True
self._old_mask = mask
return self
def get(cls):
"""
Use the masking function (``sigprocmask(2)`` or ``pthread_sigmask(3)``)
to obtain the mask of blocked signals
:returns:
A fresh :class:`sigprocmask` object.
The returned object behaves as it was constructed with the list of
currently blocked signals, ``setmask=False`` and as if the
:meth:`block()` was immediately called.
That is, calling :meth:`unblock()` will will cause those signals not to
be blocked anymore while calling :meth:`block()` will re-block them (if
they were unblocked after this method returns).
"""
mask = sigset_t()
sigemptyset(mask)
cls._do_mask(0, None, mask)
signals = []
for sig_num in range(1, NSIG):
if sigismember(mask, sig_num):
signals.append(sig_num)
self = cls(signals)
self._is_active = True
self._old_mask = mask
return self
def signals(self, new_signals):
# Convert signals to frozendict as we depend on that below
new_signals = frozenset(new_signals)
# Reset the mask to what signals describes
sigemptyset(self._mask)
for signal in new_signals:
sigaddset(self._mask, signal)
# If we're active, re-apply the changes
if self.is_active:
# In setmask mode we can just overwrite the old values directly
if self._setmask:
# NOTE: we're not updating self._old_mask here. This way
# unblock will trully restore everything despite modifications
# to signals that happened after the call to block()
self._do_mask(SIG_SETMASK, self._mask, None)
else:
# in the non-setmask mode, let's just apply the delta
delta_mask = sigset_t()
# Let's start blocking the new signals first
added_signals = new_signals - self._signals
if added_signals:
sigemptyset(delta_mask)
for signal in added_signals:
sigaddset(delta_mask, signal)
self._do_mask(SIG_BLOCK, delta_mask, None)
# Let's unblock signals next
removed_signals = self._signals - new_signals
if removed_signals:
sigemptyset(delta_mask)
for signal in removed_signals:
sigaddset(delta_mask, signal)
self._do_mask(SIG_UNBLOCK, delta_mask, None)
# Reset signals to the new value
self._signals = new_signals
def __init__(self, signals=None, setmask=False):
"""
Initialize a new pthread_sigmask object.
:param signals:
List of signals to block
:param setmask:
A flag that controls if ``SIG_SETMASK`` should be used over
``SIG_BLOCK`` and ``SIG_UNBLOCK``. For details see :meth:`block()`
and :meth:`unblock()`.
.. note::
``pthread_sigmask(2)`` is not called until :meth:`block()` is
called.
"""
if signals is None:
self._signals = frozenset()
else:
self._signals = frozenset(signals)
self._setmask = setmask
self._mask = sigset_t()
self._old_mask = None # old mask is only used for SIG_SETMASK
self._is_active = False
sigemptyset(self._mask)
for signal in self.signals:
sigaddset(self._mask, signal)
def signals(self, new_signals):
# Convert signals to frozendict as we depend on that below
new_signals = frozenset(new_signals)
# Reset the mask to what signals describes
sigemptyset(self._mask)
for signal in new_signals:
sigaddset(self._mask, signal)
# If we're active, re-apply the changes
if self.is_active:
# In setmask mode we can just overwrite the old values directly
if self._setmask:
# NOTE: we're not updating self._old_mask here. This way
# unblock will trully restore everything despite modifications
# to signals that happened after the call to block()
_pthread_sigmask(SIG_SETMASK, self._mask, None)
else:
# in the non-setmask mode, let's just apply the delta
delta_mask = sigset_t()
# Let's start blocking the new signals first
added_signals = new_signals - self._signals
if added_signals:
sigemptyset(delta_mask)
for signal in added_signals:
sigaddset(delta_mask, signal)
_pthread_sigmask(SIG_BLOCK, delta_mask, None)
# Let's unblock signals next
removed_signals = self._signals - new_signals
if removed_signals:
sigemptyset(delta_mask)
for signal in removed_signals:
sigaddset(delta_mask, signal)
_pthread_sigmask(SIG_UNBLOCK, delta_mask, None)
# Reset signals to the new value
self._signals = new_signals
def create_signal_mask():
"""Create signal mask for blocking/unblocking signals.
:return:
"""
mask = sigset_t()
sigemptyset(mask)
for sig in [SIGINT, SIGQUIT, SIGTERM]:
sigaddset(mask, sig)
return mask
def update(self, signals):
"""
Update the mask of signals this signalfd reacts to
:param signals:
A replacement set of signal numbers to monitor
:raises ValueError:
If :meth:`closed()` is True
"""
if self._sfd < 0:
_err_closed()
mask = sigset_t()
sigemptyset(mask)
if signals is not None:
for signal in signals:
sigaddset(mask, signal)
# flags are ignored when sfd is not -1
_signalfd(self._sfd, mask, 0)
self._signals = frozenset(signals)
def update(self, signals):
"""
Update the mask of signals this signalfd reacts to
:param signals:
A replacement set of signal numbers to monitor
:raises ValueError:
If :meth:`closed()` is True
"""
if self._sfd < 0:
_err_closed()
mask = sigset_t()
sigemptyset(mask)
if signals is not None:
for signal in signals:
sigaddset(mask, signal)
# flags are ignored when sfd is not -1
_signalfd(self._sfd, mask, 0)
self._signals = frozenset(signals)
def block(self):
"""
Use ``pthread_sigmask(2)`` to block signals.
This method uses either ``SIG_SETMASK`` or ``SIG_BLOCK``, depending on
how the object was constructed. After this method is called, the
subsequent call to :meth:`unblock()` will undo its effects.
.. note::
This method is a no-op if signal blocking is currently active (as
determined by :meth:`is_active` returning True).
"""
if self._is_active:
return
if self._setmask:
self._old_mask = sigset_t()
sigemptyset(self._old_mask)
_pthread_sigmask(SIG_SETMASK, self._mask, self._old_mask)
else:
_pthread_sigmask(SIG_BLOCK, self._mask, None)
self._is_active = True
def block(self):
"""
Use the masking function (``sigprocmask(2)`` or ``pthread_sigmask(3)``)
to block signals.
This method uses either ``SIG_SETMASK`` or ``SIG_BLOCK``, depending on
how the object was constructed. After this method is called, the
subsequent call to :meth:`unblock()` will undo its effects.
.. note::
This method is a no-op if signal blocking is currently active (as
determined by :meth:`is_active` returning True).
"""
if self._is_active:
return
if self._setmask:
self._old_mask = sigset_t()
sigemptyset(self._old_mask)
self._do_mask(SIG_SETMASK, self._mask, self._old_mask)
else:
self._do_mask(SIG_BLOCK, self._mask, None)
self._is_active = True
def main():
# Block signals so that they aren't handled
# according to their default dispositions
mask = sigset_t()
fdsi = signalfd_siginfo()
sigemptyset(mask)
sigaddset(mask, SIGINT)
sigaddset(mask, SIGQUIT)
sigprocmask(SIG_BLOCK, mask, None)
# Get a signalfd descriptor
sfd = signalfd(-1, mask, SFD_CLOEXEC)
# Get a epoll descriptor
epollfd = epoll_create1(EPOLL_CLOEXEC)
ev = epoll_event()
ev.events = EPOLLIN
ev.data.fd = sfd
epoll_ctl(epollfd, EPOLL_CTL_ADD, sfd, byref(ev))
MAX_EVENTS = 10
events = (epoll_event * MAX_EVENTS)()
with fdopen(sfd, 'rb', 0) as sfd_stream:
while True:
nfds = epoll_wait(
epollfd, cast(byref(events), POINTER(epoll_event)),
MAX_EVENTS, -1)
for event_id in range(nfds):
if events[event_id].data.fd == sfd:
# Read the next delivered signal
sfd_stream.readinto(fdsi)
if fdsi.ssi_signo == SIGINT:
print("Got SIGINT")
elif fdsi.ssi_signo == SIGQUIT:
print("Got SIGQUIT")
return
else:
print("Read unexpected signal")
else:
raise Exception("unexpected fd?")
close(sfd)
close(epollfd)
def main():
# Block signals so that they aren't handled
# according to their default dispositions
mask = sigset_t()
fdsi = signalfd_siginfo()
sigemptyset(mask)
sigaddset(mask, SIGINT)
sigaddset(mask, SIGQUIT)
sigprocmask(SIG_BLOCK, mask, None)
# Get a signalfd descriptor
sfd = signalfd(-1, mask, 0)
with fdopen(sfd, 'rb', 0) as sfd_stream:
while True:
# Read the next delivered signal
sfd_stream.readinto(fdsi)
if fdsi.ssi_signo == SIGINT:
print("Got SIGINT")
elif fdsi.ssi_signo == SIGQUIT:
print("Got SIGQUIT")
return
else:
print("Read unexpected signal")
def __init__(self, signals=None, flags=0):
"""
Create a signalfd() descriptor reacting to a set of signals.
:param signals:
A set of signal numbers to include in the mask of signals passed to
signalfd(2).
:param flags:
A bit-mask of flags to pass to signalfd(2). You should pass
SFD_CLOEXEC here, to ensure that a other threads don't inadvertedly
fork and leak this descriptor. You can also pass SFD_NONBLOCK to
make reads from the signalfd object non-blocking.
"""
self._sfd = -1
self._signals = frozenset()
mask = sigset_t()
sigemptyset(mask)
if signals is None:
signals = ()
for signal in signals:
sigaddset(mask, signal)
self._sfd = _signalfd(-1, mask, flags)
self._signals = frozenset(signals)
def __init__(self, signals=None, flags=0):
"""
Create a signalfd() descriptor reacting to a set of signals.
:param signals:
A set of signal numbers to include in the mask of signals passed to
signalfd(2).
:param flags:
A bit-mask of flags to pass to signalfd(2). You should pass
SFD_CLOEXEC here, to ensure that a other threads don't inadvertedly
fork and leak this descriptor. You can also pass SFD_NONBLOCK to
make reads from the signalfd object non-blocking.
"""
self._sfd = -1
self._signals = frozenset()
mask = sigset_t()
sigemptyset(mask)
if signals is None:
signals = ()
for signal in signals:
sigaddset(mask, signal)
self._sfd = _signalfd(-1, mask, flags)
self._signals = frozenset(signals)
def main():
# Block signals so that they aren't handled
# according to their default dispositions
mask = sigset_t()
fdsi = signalfd_siginfo()
sigemptyset(mask)
sigaddset(mask, SIGINT)
sigaddset(mask, SIGQUIT)
sigaddset(mask, SIGCHLD)
sigaddset(mask, SIGPIPE)
print("Blocking signals")
sigprocmask(SIG_BLOCK, mask, None)
# Get a signalfd descriptor
sfd = signalfd(-1, mask, SFD_CLOEXEC | SFD_NONBLOCK)
print("Got signalfd", sfd)
# Get a epoll descriptor
ep = epoll()
print("Got epollfd", ep.fileno())
print("Adding signalfd fd {} to epoll".format(sfd))
ep.register(sfd, EPOLLIN)
# Get two pair of pipes, one for stdout and one for stderr
stdout_pair = (c_int * 2)()
pipe2(byref(stdout_pair), O_CLOEXEC | O_NONBLOCK)
print("Got stdout pipe pair", stdout_pair[0], stdout_pair[1])
print("Adding pipe fd {} to epoll".format(stdout_pair[0]))
ep.register(stdout_pair[0], EPOLLIN)
stderr_pair = (c_int * 2)()
pipe2(byref(stderr_pair), O_CLOEXEC | O_NONBLOCK)
print("Got stderr pipe pair", stderr_pair[0], stderr_pair[1])
print("Adding pipe fd {} to epoll".format(stdout_pair[0]))
ep.register(stderr_pair[0], EPOLLIN)
prog = argv[1:]
if not prog:
prog = ['echo', 'usage: demo.py PROG [ARGS]']
print("Going to start program:", prog)
# Fork :-)
pid = fork()
if pid == 0: # Child.
# NOTE: we are not closing any of the pipe ends. Why? Because they are
# all O_CLOEXEC and will thus not live across the execlp call down
# below.
dup3(stdout_pair[1], 1, 0)
dup3(stderr_pair[1], 2, 0)
execlp(prog[0], *prog)
return -1
else:
close(stdout_pair[1])
close(stderr_pair[1])
with fdopen(sfd, 'rb', 0) as sfd_stream:
waiting_for = set(['stdout', 'stderr', 'proc'])
while waiting_for:
print("Waiting for events...", ' '.join(waiting_for), flush=True)
event_list = ep.poll(maxevents=10)
print("epoll_wait() read {} events".format(len(event_list)))
for fd, events in event_list:
print("[event]")
event_bits = []
if events & EPOLLIN == EPOLLIN:
event_bits.append('EPOLLIN')
if events & EPOLLOUT == EPOLLOUT:
event_bits.append('EPOLLOUT')
if events & EPOLLRDHUP == EPOLLRDHUP:
event_bits.append('EPOLLRDHUP')
if events & EPOLLPRI == EPOLLPRI:
event_bits.append('EPOLLPRI')
if events & EPOLLERR == EPOLLERR:
event_bits.append('EPOLLERR')
if events & EPOLLHUP == EPOLLHUP:
event_bits.append('EPOLLHUP')
if fd == sfd:
fd_name = 'signalfd()'
elif fd == stdout_pair[0]:
fd_name = 'stdout pipe2()'
elif fd == stderr_pair[0]:
fd_name = 'stderr pipe2()'
else:
fd_name = "???"
print(" events: {} ({})".format(
events, ' | '.join(event_bits)))
print(" fd: {} ({})".format(fd, fd_name))
if fd == sfd:
print("signalfd() descriptor ready")
if events & EPOLLIN:
print("Reading data from signalfd()...")
# Read the next delivered signal
sfd_stream.readinto(fdsi)
if fdsi.ssi_signo == SIGINT:
print("Got SIGINT")
elif fdsi.ssi_signo == SIGQUIT:
print("Got SIGQUIT")
raise SystemExit("exiting prematurly")
elif fdsi.ssi_signo == SIGCHLD:
print("Got SIGCHLD")
waitid_result = waitid(
P_PID, pid,
WNOHANG |
WEXITED | WSTOPPED | WCONTINUED |
WUNTRACED)
if waitid_result is None:
print("child not ready")
else:
print("child event")
print("si_pid:", waitid_result.si_pid)
print("si_uid:", waitid_result.si_uid)
print("si_signo:", waitid_result.si_signo)
assert waitid_result.si_signo == SIGCHLD
print("si_status:", waitid_result.si_status)
print("si_code:", waitid_result.si_code)
if waitid_result.si_code == CLD_EXITED:
# assert WIFEXITED(waitid_result.si_status)
print("child exited normally")
print("exit code:",
WEXITSTATUS(waitid_result.si_status))
waiting_for.remove('proc')
if 'stdout' in waiting_for:
ep.unregister(stdout_pair[0])
close(stdout_pair[0])
waiting_for.remove('stdout')
if 'stderr' in waiting_for:
ep.unregister(stderr_pair[0])
close(stderr_pair[0])
waiting_for.remove('stderr')
elif waitid_result.si_code == CLD_KILLED:
assert WIFSIGNALED(waitid_result.si_status)
print("child was killed by signal")
print("death signal:",
waitid_result.si_status)
waiting_for.remove('proc')
elif waitid_result.si_code == CLD_DUMPED:
assert WIFSIGNALED(waitid_result.si_status)
print("core:",
WCOREDUMP(waitid_result.si_status))
elif waitid_result.si_code == CLD_STOPPED:
print("child was stopped")
print("stop signal:",
waitid_result.si_status)
elif waitid_result.si_code == CLD_TRAPPED:
print("child was trapped")
# TODO: we could explore trap stuff here
elif waitid_result.si_code == CLD_CONTINUED:
print("child was continued")
else:
raise SystemExit(
"Unknown CLD_ code: {}".format(
waitid_result.si_code))
elif fdsi.ssi_signo == SIGPIPE:
print("Got SIGPIPE")
else:
print("Read unexpected signal: {}".format(
fdsi.ssi_signo))
elif fd == stdout_pair[0]:
print("pipe() (stdout) descriptor ready")
if events & EPOLLIN:
print("Reading data from stdout...")
data = read(stdout_pair[0], PIPE_BUF)
print("Read {} bytes from stdout".format(len(data)))
print(data)
if events & EPOLLHUP:
print("Removing stdout pipe from epoll")
ep.unregister(stdout_pair[0])
print("Closing stdout pipe")
close(stdout_pair[0])
waiting_for.remove('stdout')
elif fd == stderr_pair[0]:
print("pipe() (stderr) descriptor ready")
if events & EPOLLIN:
print("Reading data from stdout...")
data = read(stderr_pair[0], PIPE_BUF)
print("Read {} bytes from stderr".format(len(data)))
print(data)
if events & EPOLLHUP:
print("Removing stderr pipe from epoll")
ep.unregister(stderr_pair[0])
print("Closing stderr pipe")
close(stderr_pair[0])
waiting_for.remove('stderr')
else:
# FIXME: we are still getting weird activation events on fd
# 0 (stdin) with events == 0 (nothing). I cannot explain
# this yet.
print("Unexpected descriptor ready:", fd)
assert not waiting_for
print("Closing", ep)
ep.close()
print("Unblocking signals")
sigprocmask(SIG_UNBLOCK, mask, None)
print("Exiting normally")
