def postRig(self):
'''
clean up for the rig build.
'''
if common.isValid('%s.jointVis' % self.rigGrp):
return True
if cmds.ls(type = 'rig') and common.isValid(self.controlsGrp) and not common.isValid(self.rigGrp):
return True
jointVisAttr = attribute.addAttr(self.rigGrp, 'jointVis', attrType = 'enum', defValue = 'off:on')
scaleAttr = attribute.addAttr(self.rigGrp, 'uniformScale', attrType = 'double', defValue = 1, min = 0)
jointDisplayAttr = attribute.addAttr(self.rigGrp, 'displayJnts', attrType = 'enum', defValue = 'Normal:Template:Reference')
cmds.setAttr(jointDisplayAttr, 2)
#setup attribute for uniform scale
attribute.connect(scaleAttr, '%s.sx' % self.rigGrp)
attribute.connect(scaleAttr, '%s.sy' % self.rigGrp)
attribute.connect(scaleAttr, '%s.sz' % self.rigGrp)
if self.skinClusterJnts:
for jnt in self.skinClusterJnts:
if cmds.objExists(jnt):
attribute.connect(jointVisAttr , '%s.v' % jnt)
cmds.setAttr('%s.overrideEnabled' % jnt, 1)
attribute.connect(jointDisplayAttr , '%s.overrideDisplayType' % jnt)
#set joint visibility attribute
cmds.setAttr(jointVisAttr, 1)
for grp in [self.rigGrp, self.jointsGrp, self.controlsGrp]:
attribute.lockAndHide(['t', 'r', 's', 'v'], grp)
def setupRig(self):
if super(Arm,self).setupRig():
return True
self.skinClusterJnts.remove(self.endJoint)
self.skinClusterJnts.insert(0,self.clavicleJoint)
#delete end joint and end guide
endJntGuide = self.endJoint.replace(common.JOINT, common.GUIDES)
if common.isValid(self.endJoint):
cmds.delete(self.endJoint)
if common.isValid(endJntGuide):
cmds.delete(endJntGuide)
if self._getSide() == common.LEFT:
positions = (
[self.position[0] + .5, self.position[1], self.position[2] + 1],
[self.position[0] + 2, self.position[1], self.position[2]],
[self.position[0] + 5, self.position[1], self.position[2] - 1],
[self.position[0] + 8, self.position[1], self.position[2]]
)
elif self._getSide() == common.RIGHT:
positions = (
[self.position[0] + -.5, self.position[1], self.position[2] + 1],
[self.position[0] - 2, self.position[1], self.position[2]],
[self.position[0] - 5, self.position[1], self.position[2] - 1],
[self.position[0] - 8, self.position[1], self.position[2]]
)
else:
positions = (
[self.position[0] + .5, self.position[1], self.position[2] + 1],
[self.position[0] + 2, self.position[1], self.position[2]],
[self.position[0] + 5, self.position[1], self.position[2] - 1],
[self.position[0] + 8, self.position[1], self.position[2]]
)
#create pelvis joint and parent leg under pelvis
if not common.isValid(self.clavicleJoint):
joint.create(name = self.clavicleJoint, parent = self.skeletonGrp, position = positions[0])
cmds.parent(self.startJoint, self.clavicleJoint)
#declare guides
clavicleJointGuide = self.setupCtrl(self.clavicleJoint.replace('_%s' % common.JOINT, ''),self.clavicleJoint)
startJointGuide = self.startJoint.replace(common.JOINT, common.GUIDES)
midJointGuide = self.midJoint.replace(common.JOINT, common.GUIDES)
tipJointGuide = self.tipJoint.replace(common.JOINT, common.GUIDES)
#move master guide to clavicle position
for i, guide in enumerate([clavicleJointGuide,startJointGuide,midJointGuide, tipJointGuide]):
zeroGroup = common.getParent(guide)
if i == 0:
cmds.xform(common.getParent(self.masterGuide), ws = True, t = positions[i])
cmds.xform(zeroGroup, ws = True, t = positions[i])
def postSetupRig(self):
'''
clean up section for the setup rig
'''
if common.isValid('%s.displayAxis' % self.masterGuide) or common.isValid(self.masterGuide) != True:
return True
#create attributes and lock/hide attrs on top nodes as well as masterGuide control
displayAttr = attribute.addAttr(self.masterGuide, 'displayAxis', attrType = 'enum', defValue = 'off:on')
attribute.lockAndHide(['r','t','s','v'], [self.setupRigGrp, self.skeletonGrp,self.guidesGrp, common.getParent(self.masterGuide)])
attribute.lockAndHide('v', self.masterGuide)
#resize guide controls
for guide in self.getGuides():
cmds.setAttr('%s.radius' % common.getShapes(guide, 0), self.controlScale * .5)
#resize masterGuide control
control.scaleShape(self.masterGuide, scale = [self.controlScale * 2, self.controlScale * 2, self.controlScale * 2])
#declaring skeleton joints
skeletonJnts = self.getSkeletonJnts()
#connect joints to the attributes on the masterGuide control
for jnt in skeletonJnts:
if cmds.objExists(jnt):
attribute.connect(displayAttr , '%s.displayLocalAxis' % jnt)
common.setDisplayType(jnt, 'reference')
#parent all constraints to guides group
if self.setupConstraints:
cmds.parent(self.setupConstraints, self.guidesGrp)
#Put the build attributes onto setup rigs
'''
cmds.addAttr(self.setupRigGrp, ln = 'kwargs', dt = "string")
cmds.setAttr('%s.kwargs' % self.setupRigGrp, str(self._buildAttrs), type = "string")
'''
attribute.copy('displayAxis', self.masterGuide, self.name(), reverseConnect = True)
#parent setup under puppet node
self._puppetNode.addChild(self.setupRigGrp)
if self.parentHook:
if cmds.objExists(self.parentHook):
displayLine = control.displayLine(self.masterGuide, self.parentHook, name = self.masterGuide.replace('_%s' % common.GUIDES, '_%s' % common.CURVE))
cmds.parent(displayLine, self.guidesGrp)
#set build args on puppet node
attrs = dict()
for attr in self.attributes():
attrs[attr.name()] = attr.value()
self.puppetNode.storeArgs(**attrs)
def saveJoints(cls, joints, filepath):
"""
Save the joints for the asset
:param joints: joints that will be written out
:type joints: list | str | tuple
"""
# declare list that will be used to gather controls to save
savedJoints = list()
# make sure controls is a list before proceeding
joints = common.toList(joints)
if not isinstance(joints, list):
raise RuntimeError("%s must be a list" % joints)
# end if
for jnt in joints:
if common.isValid(jnt):
if common.isType(jnt, "joint"):
savedJoints.append(jnt)
# end if
# end loop
# save the controls in savedControls list
joint.save(savedJoints, filepath=filepath)
def postBuild(self):
"""
clean up rig asset
.. todo: Finish complete cleanup of the rig
"""
# create nodes on the rigGrp node
tagControlsAttr = control.tag_as_control(self.rigGrp)
cmds.addAttr(self.rigGrp, ln="deform_joints", at="message")
tagJointsAttr = "%s.deform_joints" % self.rigGrp
if self.controls:
for ctrl in self.controls:
attribute.connect(tagControlsAttr, "%s.%s" % (ctrl, tagControlsAttr.split(".")[1]))
# end loop
# end if
if self.skinClusterJoints:
for jnt in self.skinClusterJoints:
if common.isValid(jnt):
cmds.addAttr(jnt, ln="deform_joints", at="message")
attribute.connect(tagJointsAttr, "%s.deform_joints" % jnt)
# end if
# end loop
# end if
# lock and hide attributes
attribute.lockAndHide(["s", "v"], [self._shotCtrl, self._trsCtrl])
attribute.lockAndHide(["t", "r", "s", "v"], self.rigGrp)
# clear selection
cmds.select(cl=True)
def preBuild(self):
"""
sets up the hierachry
"""
# if there is no puppet node in the scene, we will run the setup first
if not cmds.ls(type="puppet"):
self.setup()
if common.isValid(self.rigGrp):
return True
# create hierachy
cmds.createNode("rig", n=self.rigGrp)
cmds.createNode("transform", n=self.noXformGrp)
cmds.createNode("transform", n=self.jointsGrp)
cmds.createNode("transform", n=self.controlsGrp)
# create shot and trs controls
control.create(self._shotCtrl.replace("_%s" % common.CONTROL, ""), parent=self.controlsGrp, color=common.WHITE)
control.create(self._trsCtrl.replace("_%s" % common.CONTROL, ""), parent=self._shotCtrl, color=common.WHITE)
# get the parents of the controls
shotZero = common.getParent(self._shotCtrl)
trsZero = common.getParent(self._trsCtrl)
cmds.parent(self._shotCtrl, self.controlsGrp)
cmds.parent(self._trsCtrl, self._shotCtrl)
control.scaleShape(self._shotCtrl, [2, 2, 2])
cmds.delete([shotZero, trsZero])
# cmds.createNode('transform', n = self.modelGroup)
cmds.parent([self.noXformGrp, self.jointsGrp, self.controlsGrp], self.rigGrp)
# turn off inherit transforms on the noXformGrp
cmds.setAttr("%s.inheritsTransform" % self.noXformGrp, 0)
self.controls.extend([self._shotCtrl, self._trsCtrl])
def setupRig(self):
if common.isValid(self.name()):
return True
self.setupConstraints = []
#makes component a puppet node
self.puppetNode = puppet.create(self.name())
#Create master guide control and
control.createSetup('{0}_master'.format(self.name()), type = 'square')
common.setColor(self.masterGuide, 'darkred')
#create hierarchy
cmds.createNode('transform', n = self.setupRigGrp)
cmds.createNode('transform', n = self.skeletonGrp)
cmds.createNode('transform', n = self.guidesGrp)
cmds.parent(self.skeletonGrp, self.setupRigGrp)
cmds.parent(self.guidesGrp, self.setupRigGrp)
cmds.parent(common.getParent(self.masterGuide),self.guidesGrp)
#add attributes to groups
attribute.addAttr(self.setupRigGrp, 'tag_guides', attrType = 'message')
masterGuideAttr = attribute.addAttr(self.setupRigGrp, 'master_guide', attrType = 'message')
attribute.connect(masterGuideAttr, '%s.tag_controls' % self.masterGuide)
def saveControls(cls, controls, filepath):
"""
Save the controls for the asset
:param controls: controls that will be written out
if they're nurbsCurves
:type controls: list | str | tuple
"""
# declare list that will be used to gather controls to save
savedControls = list()
# make sure controls is a list before proceeding
controls = common.toList(controls)
if not isinstance(controls, list):
raise RuntimeError("%s must be a list" % controls)
# end if
for ctrl in controls:
if common.isValid(ctrl):
if common.isType(ctrl, "nurbsCurve") or common.isType(common.getShapes(ctrl, 0), "nurbsCurve"):
savedControls.append(ctrl)
# end if
# end loop
# save the controls in savedControls list
control.save(savedControls, filepath=filepath)
def getJoints(cls, asset):
"""
Get joints based on whether or not the given asset has
a tag_joints attribute.
.. warning: This is probably going to change because it's unstable to change.
.. todo: get this working with just an attribute connected to all the deform joints
:param asset: Asset you want to get controls from
:type asset: str
:return: Returns controls on the given asset
:rtype: list | None
"""
# if the attribute is valid then get connections and return
jointAttr = "%s.displayJnts" % asset
if common.isValid(jointAttr):
joints = attribute.getConnections(jointAttr, plugs=False)
if joints:
return joints
# if there is no "displayJnts" attribute, we check for a puppet node
# in the scene. If there is one, we will check connections to that and
# traverse through the connections until we get to the joints
if cmds.ls(type="puppet"):
puppet = cmds.ls(type="puppet")
joints = list()
if puppet:
for node in attribute.getConnections("%s.puppet_nodes" % puppet[0], plugs=False):
jointAttr = "%s.displayAxis" % node
# get the connections to the "displayAxis" attribute on the node
# and if there is a connection, it should be the "masterGuide" control.
if common.isValid(jointAttr):
masterGuides = attribute.getConnections(jointAttr, plugs=False)
# get the connections to the masterGuide control, which should contain the joints
if masterGuides:
for guide in masterGuides:
jnts = attribute.getConnections(jointAttr.replace(node, guide), plugs=False)
# removes the node from the jnts list, since it is
# connected to the "displayAxis" attribute
if node in jnts:
jnts.pop(jnts.index(node))
joints.extend(jnts)
return joints
return None
def skinTwistSurfaces(joints, surface):
"""
adds a skinCluster to a surface based on joints
Example:
.. python::
skinTwistSurfaces(joints = [joint1, joint2], surface = nurbsPlane1)
@param joints: joints to deform surface
@type joints: *list*
@param surface: surface to be deformed by joints
@type surface: *str*
"""
if not isinstance(surface, str):
if isinstance(surface, unicode):
surface = str(surface)
else:
raise TypeError("%s is not a string. Pass string into argument surface" % surface)
if not common.isValid(surface):
raise RuntimeError("%s is does not exist in the scene." % surface)
for jnt in joints:
if not common.isValid(jnt):
raise RuntimeError("%s is does not exist in the scene." % jnt)
# create the skinCluster based on joints and surface
skinCluster = cmds.skinCluster(joints, surface, dr=0.1, tsb=True)
# iterate through joints and assign values to cv's on surface so the are bound to a specific joint
# check surface degree
surfShape = common.getShape(surface)[0]
degree = cmds.getAttr("%s.degreeU" % surfShape)
for i in range(0, len(joints)):
cmds.skinPercent(skinCluster[0], (surface + ".cv[0:%d][%d]" % (degree, i)), transformValue=[(joints[i], 1.0)])
return skinCluster
def getControls(cls, asset):
"""
Get controls based on whether or not the given asset has
a tag_controls attribute.
:param asset: Asset you want to get controls from
:type asset: str
:return: Returns controls on the given asset
:rtype: list | None
"""
controlAttr = "%s.tag_controls" % asset
if common.isValid(controlAttr):
return attribute.getConnections(controlAttr, plugs=False)
# end if
return None
def rig(self):
'''
this is the build section for the rig.
'''
if common.isValid(self.controlsGrp):
return True
if not self._puppetNode:
self.runSetupRig()
#resolve build arguments
if not self.puppetNode == self.name():
self.puppetNode = puppet.Puppet(self.name())
self.puppetNode.restoreArgs(self)
cmds.createNode('transform', n = self.rigGrp)
cmds.createNode('transform', n = self.jointsGrp)
cmds.createNode('transform', n = self.controlsGrp)
cmds.parent([self.jointsGrp, self.controlsGrp], self.rigGrp)
if not self.skinClusterJnts:
self.skinClusterJnts.extend(self.getSkeletonJnts())
for jnt in self.skinClusterJnts:
if cmds.objExists(jnt):
common.setDisplayType(jnt, 'normal')
#get parent jnt
parent = cmds.listRelatives(jnt, p = True)
if parent:
if parent[0] == self.skeletonGrp:
cmds.parent(jnt, self.jointsGrp)
#delete the setup rig group
cmds.delete(self.setupRigGrp)
for jnt in self.skinClusterJnts:
if cmds.objExists(jnt):
#turn display axis off
cmds.setAttr('%s.displayLocalAxis' % jnt, 0)
#take the rotations of the joint and make the orientation
joint.rotateToOrient(jnt)
def create(name):
'''
Creation of a puppet node
Example:
...python:
puppet.create('l_leg')
#Result: puppet.Puppet object
@param name: Name of the puppet node
@type name: *str*
@return: puppet.Puppet object
@rtype: *Puppet*
'''
global PUPPET, TAGNAME
name = common.checkName(name)
#create a transform node with the name passed
mFnDependNode = om.MFnDependencyNode() #create MFnDependency Node object
#if puppet node does not exist, create one
if not common.isValid(PUPPET):
puppetObject = mFnDependNode.create('puppet', PUPPET)
cmds.addAttr(PUPPET, ln = TAGNAME, at = 'message')
#end if
#create
cmds.createNode('transform', name = name) #create transform
#mFnDependNode.setName(name) #set name
#return an asset object
newPuppetNode = Puppet(name)
#parent node to puppet
cmds.parent(newPuppetNode.fullPathName(), PUPPET)
#tag puppet nodes
newPuppetNode.tagNode()
return newPuppetNode
def postRig(self):
super(Foot, self).postRig()
#lock bank controls
for node in (self.__bankInCtrl,self.__bankOutCtrl, self.__heelPivotCtrl):
if common.isValid(node):
attribute.lockAndHide(['rx','s', 'v'], node)
#end if
#end loop
#lock and hide foot control attributes
attribute.lockAndHide(['t', 'r', 's', 'v'], self.__footCtrl)
for handle in self.__footIkFk.getIkHandles():
cmds.setAttr('%s.v' % handle, 0 )
#end loop
cmds.setAttr('%s.v' % self.__footIkFk.ikJoints[0], 0)
cmds.setAttr('%s.v' % self.__footIkFk.fkJoints[0], 0)
cmds.setAttr('%s.v' % self.__footIkFk.blendJoints[0], 0)
def build(self):
"""
build rig hierarchy and attach components
"""
# if there is no rig node in the scene, we will run the setup first
if not cmds.ls(type="rig"):
self.preBuild()
self.run()
for node in self.nodes():
if not isinstance(node, component.Component):
continue
if not common.isValid(node.rigGrp):
node.runRig()
trsChildren = cmds.listRelatives(self._trsCtrl, c=True)
if node.controlsGrp in trsChildren:
continue
cmds.parent(node.controlsGrp, self._trsCtrl)
cmds.parent(node.jointsGrp, self.jointsGrp)
for attr in ["displayJnts", "jointVis"]:
fullAttrPath = "%s.%s" % (self.rigGrp, attr)
componentAttr = "%s.%s" % (node.rigGrp, attr)
if cmds.objExists(componentAttr):
if not cmds.objExists(fullAttrPath):
attribute.copy(attr, node.rigGrp, self.rigGrp, reverseConnect=False)
# end if
connectedAttrs = attribute.getConnections(attr, node.rigGrp, incoming=False)
if connectedAttrs:
for connectedAttr in connectedAttrs:
cmds.disconnectAttr(componentAttr, connectedAttr)
attribute.connect(fullAttrPath, connectedAttr)
# end for
# end if
# end if
# end for
cmds.delete(node.rigGrp)
def restorePuppetNodes():
global PUPPET
#declare empty dictionary for restored nodes
restoredNodes = dict()
#check for a PUPPET node
if not common.isValid(PUPPET):
raise RunTimeError('%s does not exist in your scene! You need a %s node to restore puppet nodes' % (PUPPET, PUPPET))
#end if
#get the children of PUPPET
children = common.getChildren(PUPPET)
#check to see if there are any children, if not, raise a warning and return nothing
if not children:
cmds.warning('%s has no child puppet nodes to restore!' % PUPPET)
return False
#end if
#If nodes exist then place them in the restored dictionary
for node in children:
restoredNodes[node] = Puppet(node)
return restoredNodes
def setupRig(self):
if super(Limb,self).setupRig():
return True
self.skinClusterJnts = [ self.startJoint,
self.midJoint,
self.tipJoint,
self.endJoint ]
if self._getSide() == common.LEFT:
positions = (
[self.position[0] + 2, self.position[1], self.position[2]],
[self.position[0] + 5, self.position[1], self.position[2] - 1],
[self.position[0] + 8, self.position[1], self.position[2]],
[self.position[0] + 9, self.position[1], self.position[2]]
)
elif self._getSide() == common.RIGHT:
positions = (
[self.position[0] - 2, self.position[1], self.position[2]],
[self.position[0] - 5, self.position[1], self.position[2] - 1],
[self.position[0] - 8, self.position[1], self.position[2]],
[self.position[0] - 9, self.position[1], self.position[2]]
)
else:
positions = (
[self.position[0] - 2, self.position[1], self.position[2]],
[self.position[0] - 5, self.position[1], self.position[2] - 1],
[self.position[0] - 8, self.position[1], self.position[2]],
[self.position[0] - 9, self.position[1], self.position[2]]
)
for i,jnt in enumerate(self.skinClusterJnts):
if not common.isValid(jnt):
cmds.joint(n = jnt,position = positions[i])
if i == 0:
cmds.parent(jnt, self.skeletonGrp)
#place Master Guide control in the same position as the first joint
transform.matchXform(jnt, common.getParent(self.masterGuide), type = 'position')
else:
cmds.parent(jnt, self.skinClusterJnts[i - 1])
ctrl = self.setupCtrl(jnt.replace('_%s' % common.JOINT, ''),jnt)
#create template control
#control.createTemplate(ctrl)
cmds.select(cl = True)
# ----------------------------------------------------------------------
# CREATE GUIDES
startJointGuide = self.startJoint.replace(common.JOINT, common.GUIDES)
midJointGuide = self.midJoint.replace(common.JOINT, common.GUIDES)
tipJointGuide = self.tipJoint.replace(common.JOINT, common.GUIDES)
endJointGuide = self.endJoint.replace(common.JOINT, common.GUIDES)
#templateNullGroup = cmds.createNode('transform', n = endJointGuide.replace(common.GUIDES, common.GROUP))
#transform.matchXform(locator, endJointGuide, type = 'position')
#cmds.pointConstraint(tipJointGuide, templateNullGroup)
#cmds.parent(templateNullGroup, self.guidesGrp)
#control.createTemplate(templateNullGroup, defaultType = 'implicitSphere')
# ----------------------------------------------------------------------
# ORIENTATION
#
if self._getSide() == common.RIGHT:
aimVectorAttr = \
attribute.switch ('aimVector',
node= self.masterGuide,
value=4,
choices=['x','y','z','-x','-y','-z'],
outputs=[(1,0,0),(0,1,0),(0,0,1),(-1,0,0),(0,-1,0),(0,0,-1)])
upVectorAttr = \
attribute.switch ('upVector',
node=self.masterGuide,
value=3,
choices=['x','y','z','-x','-y','-z'],
outputs=[(1,0,0),(0,1,0),(0,0,1),(-1,0,0),(0,-1,0),(0,0,-1)])
else:
aimVectorAttr = \
attribute.switch ('aimVector',
node=self.masterGuide,
value=1,
choices=['x','y','z','-x','-y','-z'],
outputs=[(1,0,0),(0,1,0),(0,0,1),(-1,0,0),(0,-1,0),(0,0,-1)])
upVectorAttr = \
attribute.switch ('upVector',
node=self.masterGuide,
value=3,
choices=['x','y','z','-x','-y','-z'],
outputs=[(1,0,0),(0,1,0),(0,0,1),(-1,0,0),(0,-1,0),(0,0,-1)])
#Get Vectors for the cross product
#Decompose matrix nodes
startJointDcm = \
cmds.createNode('decomposeMatrix',
name = self.startJoint.replace('%s_%s' % (common.SKINCLUSTER, common.JOINT), common.DECOMPOSEMATRIX ))
attribute.connect('%s.worldMatrix' % startJointGuide,'%s.inputMatrix' % startJointDcm)
midJointDcm = \
cmds.createNode('decomposeMatrix', name = self.midJoint.replace('%s_%s' % (common.SKINCLUSTER, common.JOINT), common.DECOMPOSEMATRIX ))
attribute.connect('%s.worldMatrix' % midJointGuide, '%s.inputMatrix' % midJointDcm)
tipJointDcm = \
cmds.createNode('decomposeMatrix', name = self.tipJoint.replace('%s_%s' % (common.SKINCLUSTER, common.JOINT), common.DECOMPOSEMATRIX ))
attribute.connect('%s.worldMatrix' % tipJointGuide, '%s.inputMatrix' % tipJointDcm)
#plus minus average nodes
v1Node = cmds.createNode('plusMinusAverage')
v2Node = cmds.createNode('plusMinusAverage')
cmds.setAttr('%s.operation' % v1Node, 2)
cmds.setAttr('%s.operation' % v2Node, 2)
#connect Decompose Matrix and Plus Minus Average nodes
attribute.connect('%s.outputTranslate' % tipJointDcm, '%s.input3D[0]' % v1Node)
attribute.connect('%s.outputTranslate' % startJointDcm, '%s.input3D[1]' % v1Node)
attribute.connect('%s.outputTranslate' % midJointDcm, '%s.input3D[0]' % v2Node)
attribute.connect('%s.outputTranslate' % startJointDcm, '%s.input3D[1]' % v2Node)
#Get the cross product
crossNode = cmds.createNode('vectorProduct')
cmds.setAttr( '%s.%s' % (crossNode,'operation') , 2 )
attribute.connect( '%s.%s' % (v1Node,'output3D'), '%s.%s' % (crossNode,'input1') )
attribute.connect( '%s.%s' % (v2Node,'output3D'), '%s.%s' % (crossNode,'input2') )
crossVectorAttr = '%s.%s' % (crossNode,'output')
#Aim start joint to the middle joint
constraint = \
cmds.aimConstraint(midJointGuide,
self.startJoint,
aimVector = (1,0,0),
upVector = (0,1,0),
worldUpType = 'vector',
worldUpVector = (0,1,0))[0]
attribute.connect(aimVectorAttr, '%s.aimVector' % constraint)
attribute.connect(upVectorAttr, '%s.upVector' % constraint)
attribute.connect(crossVectorAttr, '%s.worldUpVector' % constraint)
self.setupConstraints.append(constraint)
#Aim middle joint to the tip joint
constraint = \
cmds.aimConstraint(tipJointGuide,
self.midJoint,
aimVector = (1,0,0),
upVector = (0,1,0),
worldUpType = 'vector',
worldUpVector = (0,1,0))[0]
attribute.connect(aimVectorAttr, '%s.aimVector' % constraint)
attribute.connect(upVectorAttr, '%s.upVector' % constraint)
attribute.connect(crossVectorAttr, '%s.worldUpVector' % constraint)
self.setupConstraints.append(constraint)
constraint = cmds.orientConstraint(self.midJoint, self.tipJoint)[0]
self.setupConstraints.append(constraint)
cmds.setAttr('%s.normalizeOutput' % crossNode, True)
self.upTwistJnts = list()
step = 1.0 / (self.numSegments + 1)
parent = self.startJoint
for i in range( 1, self.numSegments + 1 ):
j = joint.create( name='%s' % (self.startJoint.replace('_%s' % common.SKINCLUSTER, 'Twist_%s_%s' % (common.padNumber(i,3), common.SKINCLUSTER))), parent=parent )
transform.matchXform( self.startJoint,j, type='rotate' )
constraint = cmds.pointConstraint( self.startJoint, self.midJoint, j )[0]
weightAliasList = cmds.pointConstraint( constraint, q=True, weightAliasList=True )
cmds.setAttr( '%s.%s' % (constraint, weightAliasList[0]), 1-(step*i) )
cmds.setAttr( '%s.%s' % (constraint, weightAliasList[1]), step*i )
self.upTwistJnts.append(j)
self.skinClusterJnts.append(j) #adding the joint to skincluster joints list
# Create MiddleJoint Segments
self.loTwistJnts = list()
parent = self.midJoint
for i in range( 1, self.numSegments + 1):
j = joint.create( name='%s' % (self.midJoint.replace('_%s' % common.SKINCLUSTER, 'Twist_%s_%s' % (common.padNumber(i,3), common.SKINCLUSTER))), parent=parent )
transform.matchXform( self.midJoint,j, type='rotate' )
constraint = cmds.pointConstraint( self.midJoint, self.tipJoint, j )[0]
weightAliasList = cmds.pointConstraint( constraint, q=True, weightAliasList=True )
cmds.setAttr( '%s.%s' % (constraint, weightAliasList[0]), 1-(step*i) )
cmds.setAttr( '%s.%s' % (constraint, weightAliasList[1]), step*i )
self.loTwistJnts.append(j)
self.skinClusterJnts.append(j) #adding the joint to skincluster joints list
def rig(self):
if not self._puppetNode:
self.runSetupRig()
if cmds.objExists('%s.master_guide' % self.setupRigGrp):
self.masterGuide = attribute.getConnections('master_guide', self.setupRigGrp)[0].split('.')[0]
if common.isValid(self.masterGuide):
#get orientations for controls
fkOrient = self.__fkOrient()
ikOrient = self.__ikOrient()
upVector = self.upVector
aimVector = self.aimVector
#call parent class rig function
if super(Limb, self).rig():
return True
#create ik fk switch
ikfkDict = ikfk.create(jointChain = [self.startJoint, self.midJoint, self.tipJoint], stretch = self.stretch)
ikfkDict['group'] = cmds.rename(ikfkDict['group'], '%s_%s' % (self.name(),ikfkDict['group']))
#set the visibility on the ik/fk/blend joints to off
cmds.setAttr('%s.v' % ikfkDict['fkJoints'][0], 0)
cmds.setAttr('%s.v' % ikfkDict['ikJoints'][0], 0)
cmds.setAttr('%s.v' % ikfkDict['blendJoints'][0], 0)
ikfkAttr = attribute.addAttr(self.rigGrp, attr = 'ikfk', attrType = 'enum', defValue = ['off','on'],value = 0)
cmds.connectAttr(ikfkAttr, '%s.ikfk' % ikfkDict['group'], l = True, f = True)
#parent ikfk group under joints group
cmds.parent(ikfkDict['group'], self.jointsGrp)
#rename all ik and blend joints
for i,jnt in enumerate(ikfkDict['ikJoints']):
jnt = cmds.rename(jnt, jnt.replace('%s_%s_%s' % (common.SKINCLUSTER,common.JOINT, common.IK), '%s_%s' % (common.IK, common.JOINT)))
ikfkDict['ikJoints'][i] = jnt
for i,jnt in enumerate(ikfkDict['blendJoints']):
jnt = cmds.rename(jnt, jnt.replace('%s_%s_%s' % (common.SKINCLUSTER,common.JOINT, common.BLEND), '%s_%s' % (common.BLEND, common.JOINT)))
ikfkDict['blendJoints'][i] = jnt
#create ik setup
ikCtrl = control.create(name = ikfkDict['ikJoints'][2].replace('_%s' % common.JOINT, ''),type = 'cube', parent = self.controlsGrp, color = common.SIDE_COLOR[self._getSide()])
ikCtrlZero = common.getParent(ikCtrl)
attribute.copy('stretch', ikfkDict['group'], destination = ikCtrl, connect = True,reverseConnect = False)
attribute.copy('stretchTop', ikfkDict['group'], destination = ikCtrl, connect = True,reverseConnect = False)
attribute.copy('stretchBottom', ikfkDict['group'], destination = ikCtrl, connect = True,reverseConnect = False)
if ikOrient == 'Local':
transform.matchXform(ikfkDict['ikJoints'][2], ikCtrlZero, type = 'pose')
else:
transform.matchXform(ikfkDict['ikJoints'][2], ikCtrlZero, type = 'position')
cmds.orientConstraint(ikCtrl, ikfkDict['ikJoints'][2], mo = True)
common.setColor(ikCtrl, common.SIDE_COLOR[self._getSide()])
#setup poleVector
pvCtrl = control.create(name = ikfkDict['ikJoints'][2].replace('_%s' % common.JOINT, '_%s' % common.POLEVECTOR),type = 'cube', parent = self.controlsGrp, color = common.SIDE_COLOR[self._getSide()])
#size polevector control
for i in range(len(common.getShapes(pvCtrl))):
control.scaleShape(pvCtrl, scale = [self.controlScale * .5, self.controlScale * .5, self.controlScale * .5], index = i)
pvCtrlZero = common.getParent(pvCtrl)
pvDisplayLineAttr = attribute.addAttr(pvCtrl, attr = 'pvLine', attrType = 'enum', defValue = 'off:on', value = 1)
transform.matchXform(ikfkDict['ikJoints'][1], pvCtrlZero, type = 'position')
#cmds.parent(ikfkDict['ikHandle'], w = True)
pvPos = ikfk.getPoleVectorPosition(ikfkDict['ikJoints'][1], ikfkDict['ikHandle'])
cmds.xform(pvCtrlZero, ws = True, t = pvPos)
common.setColor(pvCtrlZero, common.SIDE_COLOR[self._getSide()])
#create polevector constraint and parent under control
cmds.poleVectorConstraint(pvCtrl, ikfkDict['ikHandle'])
targetConstraint = cmds.pointConstraint(ikCtrl, ikfkDict['targetJnts'][1], mo = True) #ikhandle is under target joint
pvDisplayLine = control.displayLine(ikfkDict['ikJoints'][0], pvCtrl, name = pvCtrl.replace(common.CONTROL, common.DISPLAYLINE), parent = self.controlsGrp)
cmds.orientConstraint(ikCtrl,ikfkDict['ikJoints'][0], mo = True)
#adding attribute to ik ctrl
ikTwistAttr = attribute.addAttr(ikCtrl, attr = 'twist')
cmds.connectAttr(ikTwistAttr, '%s.twist' % ikfkDict['ikHandle'], f = True)
#connecting to shapes
ikfkReverse = cmds.createNode('reverse', n = ikCtrl.replace('%s_%s' % (common.IK, common.CONTROL), '%s_%s' % (common.REVERSE, common.UTILITY)))
attribute.connect('%s.ikfk' % ikfkDict['group'], '%s.inputX' % ikfkReverse)
for shape in common.getShapes(ikCtrl):
attribute.connect('%s.outputX' % ikfkReverse,'%s.v' % shape)
for shape in common.getShapes(pvCtrl):
attribute.connect('%s.outputX' % ikfkReverse,'%s.v' % shape)
#connect pvDisplayLineAttr in pvDisplayLine visibility
displayLineMultiply = cmds.createNode('multiplyDivide', n = pvDisplayLine.replace(common.DISPLAYLINE, common.MULTIPLYDIVIDE))
attribute.connect(pvDisplayLineAttr, '%s.input1X' % displayLineMultiply)
attribute.connect('%s.outputX' % ikfkReverse, '%s.input2X' % displayLineMultiply)
attribute.connect('%s.outputX' % displayLineMultiply, '%s.v' % common.getChildren(pvDisplayLine)[0])
#create fk setup
fkCtrls = list()
parent = self.controlsGrp
for i,jnt in enumerate(ikfkDict['fkJoints']):
cmds.select(cl = True)
#rename fk joint
jnt = cmds.rename(jnt,jnt.replace('%s_%s_%s' % (common.SKINCLUSTER,common.JOINT,common.FK), '%s_%s' % (common.FK,common.JOINT)))
ikfkDict['fkJoints'][i] = jnt #re-assign fk joint intop ikfkDict
#create controls, set color, and make connections
fkCtrl = control.create(name = jnt.replace('_%s' % common.JOINT, ''),type = 'circle', parent = parent, color = common.SIDE_COLOR[self._getSide()])
fkCtrlZero = common.getParent(fkCtrl)
if fkOrient == 'Local':
transform.matchXform(jnt, fkCtrlZero, type = 'pose')
#end if
else:
transform.matchXform(jnt, fkCtrlZero, type = 'position')
#end else
cmds.connectAttr('%s.ikfk' % ikfkDict['group'], '%s.v' % common.getShapes(fkCtrl)[0], f = True)
cmds.parentConstraint(fkCtrl, jnt, mo = True)
attribute.lockAndHide('t', fkCtrl)
attribute.lockAndHide('s', fkCtrl)
attribute.lockAndHide('v', fkCtrl)
#get joint rotate order and apply to control and parent group
rotateOrder = attribute.getValue('rotateOrder', jnt)
for node in [fkCtrl, fkCtrlZero]:
cmds.setAttr('%s.rotateOrder' % node, rotateOrder)
fkCtrls.append(fkCtrl)
parent = fkCtrl
#end loop
#end loop
aimAxis = transform.getAimAxis(ikfkDict['blendJoints'][0], allowNegative = False)
#Up Twist Joint Setup
if self.upTwistJnts:
noTwistJnt = common.duplicate(self.startJoint, name = self.startJoint.replace('%s' % common.SKINCLUSTER, 'NoTwist_%s' % common.SKINCLUSTER), parent = self.startJoint)
inverseMultNode = cmds.createNode('multiplyDivide', n = noTwistJnt.replace('%s_%s' % (common.SKINCLUSTER,common.JOINT), '%s_%s' % (common.UTILITY, common.MULTIPLYDIVIDE)))
cmds.connectAttr('%s.r%s' % (ikfkDict['blendJoints'][0], aimAxis), '%s.input1X' % inverseMultNode, f = True)
cmds.setAttr('%s.input2X' % inverseMultNode, -1)
cmds.connectAttr('%s.outputX' % inverseMultNode, '%s.r%s' % (noTwistJnt, aimAxis), f = True)
step = 1.0 / (len(self.upTwistJnts) +1)
for i in range( 1, (len(self.upTwistJnts)+1) ):
twsitMultNode = cmds.createNode('multiplyDivide', n = self.upTwistJnts[i - 1].replace('%s_%s' % (common.SKINCLUSTER,common.JOINT), '%s_%s' % (common.UTILITY, common.MULTIPLYDIVIDE)))
cmds.connectAttr('%s.r%s' % (ikfkDict['blendJoints'][0], aimAxis), '%s.input1X' % twsitMultNode, f = True)
cmds.setAttr('%s.input2X' % twsitMultNode, -(1-(step*i)) )
cmds.connectAttr('%s.outputX' % twsitMultNode, '%s.r%s' % (self.upTwistJnts[i -1], aimAxis),f = True)
#end loop
self.upTwistJnts.insert(0, noTwistJnt)
#end if
if self.loTwistJnts:
twistJnt = common.duplicate(self.midJoint,name = self.midJoint.replace('%s' % common.SKINCLUSTER, 'loTwist_%s' % common.SKINCLUSTER), parent = self.midJoint)
constraint = cmds.aimConstraint(ikfkDict['blendJoints'][2],twistJnt,aimVector = aimVector, upVector = upVector, worldUpType ="objectrotation", worldUpVector = upVector, worldUpObject = self.tipJoint)
cmds.setAttr('%s.v' % twistJnt, 0)
#end if
step = 1.0 / (len(self.loTwistJnts) +1)
for i in range( 1, (len(self.loTwistJnts)+1) ):
twsitMultNode = cmds.createNode('multiplyDivide', n = self.loTwistJnts[i - 1].replace('%s_%s' % (common.SKINCLUSTER,common.JOINT), '%s_%s' % (common.UTILITY, common.MULTIPLYDIVIDE)))
cmds.connectAttr('%s.r%s' % (ikfkDict['blendJoints'][2], aimAxis), '%s.input1X' % twsitMultNode, f = True)
cmds.setAttr('%s.input2X' % twsitMultNode, 1-(step*i) )
cmds.connectAttr('%s.outputX' % twsitMultNode, '%s.r%s' % (self.loTwistJnts[i -1], aimAxis),f = True)
#end loop
#------------------------
#Add to class variables
#------------------------
#assign joints to the joints list
self.joints = {'ik' : ikfkDict['ikJoints'], 'fk' : ikfkDict['fkJoints'], 'blend' : ikfkDict['blendJoints'], 'target' : ikfkDict['targetJnts']}
#assign controls to the controls list
#assign fkCtrls into the controls dictionary
self.controls = {'ik' : [ikCtrl, pvCtrl],'fk' : fkCtrls }
self.ikfkGroup = ikfkDict['group']
#assign hooks
self.hookRoot = [ikfkDict['ikJoints'][0], common.getParent(fkCtrls[0]), ikCtrl, ikfkDict['targetJnts'][-1]]
self.hookPoint = [ikfkDict['blendJoints'][-1]]
#add no twist joint to the skincluster list
self.skinClusterJnts.append(noTwistJnt)
def load( filepath, world=False ):
'''Import joints exported with the *save* function. **python format**
If the joint already exists it will set the transformation, if it doesn't it will create it.
.. python ::
# This command will only import the exported values into persp node, if any.
load( '/var/tmp/attributes.pyson', 'persp' )
:param filepath: File exported with the save function.
:type filepath: **str**
:param world: Import world position
:type world: **bool**
'''
if not fileIO.isFile(filepath):
raise RuntimeError, 'No valid filepath "%s"' % filepath
# Get Data
data = pyon.load( filepath )
# Create Joints
for joint in data.keys():
parameters = data[joint]['parameters']
parent = data[joint]['parent']
# Create Joint
if not common.isValid( joint ):
joint = create( name=joint )
# Create Parent Node
if not common.isValid( parent ) and parent in data.keys():
parent = create( name=parent )
# Parent joint
if common.isValid( parent ) and common.getParent( joint ) != parent:
cmds.parent( joint, parent )
# Set values
for attr in parameters.keys():
# Check if valid
if not common.isValid('%s.%s' % (joint, attr)):
continue
# ------------------------------------------------------------------
# Check if connected or locked
locked = False
if attribute.isConnected( attr, joint, incoming=True, outgoing=False ) or attribute.isLocked( attr, joint ):
locked = True
if attribute.isCompound( attr, joint ):
attrChildren = cmds.attributeQuery( attr, node = joint, listChildren = True)
for attrChild in attrChildren:
if attribute.isConnected( attrChild, joint, incoming=True, outgoing=False ) or attribute.isLocked( attrChild, joint ):
locked = True
if locked:
continue
# ------------------------------------------------------------------
# Set values
value = parameters[attr]
attribute.setValue( attr, joint, value )
# Set world position
if world:
for joint in data.keys():
worldPosition = data[joint]['worldPosition']
cmds.move( worldPosition[0], worldPosition[1], worldPosition[2], joint, worldSpace=True, a=True, pcp=True )
#logger.info( 'Joints loaded from: "%s"' % filepath)
def setupRig(self):
if super(Chain, self).setupRig():
return True
self.skinClusterJnts = [self.startJoint, self.endJoint]
if self._getSide() == common.LEFT:
positions = (
[self.position[0] + 2, self.position[1], self.position[2]],
[self.position[0] + 9, self.position[1], self.position[2]]
)
aimCtrlPosition = [positions[0][0],
positions[0][1] + 5,
positions[0][2]]
#end if
elif self._getSide() == common.RIGHT:
positions = (
[self.position[0] - 2, self.position[1], self.position[2]],
[self.position[0] - 9, self.position[1], self.position[2]]
)
aimCtrlPosition = [positions[0][0],
positions[0][1] + 5,
positions[0][2]]
#end elif
else:
positions = (
[self.position[0], self.position[1], self.position[2]],
[self.position[0], self.position[1] + 9, self.position[2]]
)
aimCtrlPosition = [positions[0][0],
positions[0][1],
positions[0][2] + 5]
#end elif
for i,jnt in enumerate(self.skinClusterJnts):
if not common.isValid(jnt):
cmds.joint(n = jnt,position = positions[i])
if i == 0:
cmds.parent(jnt, self.skeletonGrp)
#place Master Guide control in the same position
# as the first joint
transform.matchXform(jnt,
common.getParent(self.masterGuide),
type = 'position')
else:
cmds.parent(jnt, self.skinClusterJnts[i - 1])
#end if/else
ctrl = self.setupCtrl(jnt.replace('_%s' % common.JOINT, ''),jnt)
#create template control
#control.createTemplate(ctrl)
cmds.select(cl = True)
#end loop
# ----------------------------------------------------------------------
# CREATE GUIDES
startJointGuide = self.startJoint.replace(common.JOINT, common.GUIDES)
endJointGuide = self.endJoint.replace(common.JOINT, common.GUIDES)
# ----------------------------------------------------------------------
# ORIENTATION
#
if self._getSide() == common.RIGHT:
aimVectorAttr = attribute.switch ('aimVector',
node= self.masterGuide,
value=4,
choices=['x','y','z','-x','-y','-z'],
outputs=[(1,0,0),(0,1,0),(0,0,1),(-1,0,0),(0,-1,0),(0,0,-1)])
upVectorAttr = attribute.switch ('upVector',
node=self.masterGuide,
value=3,
choices=['x','y','z','-x','-y','-z'],
outputs=[(1,0,0),(0,1,0),(0,0,1),(-1,0,0),(0,-1,0),(0,0,-1)])
else:
aimVectorAttr = attribute.switch ('aimVector',
node=self.masterGuide,
value=1,
choices=['x','y','z','-x','-y','-z'],
outputs=[(1,0,0),(0,1,0),(0,0,1),(-1,0,0),(0,-1,0),(0,0,-1)])
upVectorAttr = attribute.switch ('upVector',
node=self.masterGuide,
value=3,
choices=['x','y','z','-x','-y','-z'],
outputs=[(1,0,0),(0,1,0),(0,0,1),(-1,0,0),(0,-1,0),(0,0,-1)])
#create in-between joints and guides and make connections
step = 1.0 / (self.numJoints - 1)
parent = self.startJoint
for i in range( 1, self.numJoints - 1 ):
j = '%s_%s_%s_%s_%s' % (self._getPrefix(),
common.getDescription(self.name()),
common.padNumber(i,3),
common.SKINCLUSTER,
common.JOINT)
if not common.isValid(j):
joint.create( name= j)
transform.matchXform( self.startJoint,j, type='rotate' )
ctrl = self.setupCtrl(j.replace('_%s' % common.JOINT, ''),j)
ctrlParent = common.getParent(ctrl)
#create point constraint and figure out percentage for position
constraint = cmds.pointConstraint( self.startJoint,
endJointGuide, ctrlParent )[0]
weightAliasList = cmds.pointConstraint( constraint,
q=True,
weightAliasList=True)
cmds.setAttr( '%s.%s' % (constraint, weightAliasList[0]), 1-(step*i) )
cmds.setAttr( '%s.%s' % (constraint, weightAliasList[1]), step*i )
#adding the joint to skincluster joints list
self.skinClusterJnts.insert(-1, j)
relatives = cmds.listRelatives(j, p = True)
if not relatives:
cmds.parent(j, parent)
parent = j
if i == self.numJoints - 2:
cmds.parent(self.endJoint, j)
constraint = cmds.orientConstraint(j, self.endJoint)[0]
#add constraints to setup constraint list
self._addSetupConstraints(constraint)
#create aim control
aimLocator = self._createAimLocator(aimCtrlPosition,
color = common.SIDE_COLOR_SECONDARY[self._getSide()])
#create aim constraints
for i, jnt in enumerate(self.skinClusterJnts):
if jnt == self.endJoint:
break
constraint = cmds.aimConstraint(
self.skinClusterJnts[i+1].replace('_%s' % common.JOINT, '_%s' % common.GUIDES),
jnt,
worldUpType = "object",
worldUpObject = aimLocator)[0]
attribute.connect(aimVectorAttr, '%s.aimVector' % constraint)
attribute.connect(upVectorAttr, '%s.upVector' % constraint)
#add constraints to setup constraint list
self._addSetupConstraints(constraint)
def setupRig(self):
if super(Hand, self).setupRig():
return True
if self._getSide() == common.LEFT:
#move master guide into position
cmds.xform(common.getParent(self.masterGuide), ws = True,
t = self.handPosition)
for i,obj in enumerate(self.fingers):
self.__fingers[obj] = finger.Finger('%s_%s' % (self._getPrefix(),
obj))
self.__fingers[obj].initialize(numJoints = self.numJoints,
position=[self.position[0] + 10,
self.position[1],
(self.position[2] + 2 )- i],
parent = self.parent)
self.__fingers[obj].setupRig()
cmds.parentConstraint(self.masterGuide,
common.getParent(self.__fingers[obj].masterGuide),
mo = True)
for guide in self.__fingers[obj].getGuides():
#tag the guide control with a tag_guides attribute
tagAttr = attribute.addAttr(guide, 'hand_guides',
attrType = 'message')
attribute.connect('%s.tag_guides' % self.setupRigGrp,
tagAttr)
#end loop
#end loop
#end if
elif self._getSide() == common.RIGHT:
#move master guide into position
cmds.xform(common.getParent(self.masterGuide), ws = True, t = self.handPosition)
for i,obj in enumerate(self.fingers):
self.__fingers[obj] = finger.Finger('%s_%s' % (self._getPrefix(), obj))
self.__fingers[obj].initialize(numJoints = self.numJoints, position = [self.position[0] - 10, self.position[1], (self.position[2] + 2 ) - i], parent = self.parent)
self.__fingers[obj].setupRig()
cmds.parentConstraint(self.masterGuide, common.getParent(self.__fingers[obj].masterGuide), mo = True)
for guide in self.__fingers[obj].getGuides():
#tag the guide control with a tag_guides attribute
tagAttr = attribute.addAttr(guide, 'hand_guides', attrType = 'message')
attribute.connect('%s.tag_guides' % self.setupRigGrp, tagAttr)
#end loop
#end loop
#end elif
else:
#move master guide into position
cmds.xform(common.getParent(self.masterGuide), ws = True, t = self.handPosition)
for i,obj in enumerate(self.fingers):
self.__fingers[obj] = finger.Finger('%s_%s' % (self._getPrefix(), obj))
self.__fingers[obj].initialize(numJoints = self.numJoints, position = [self.position[0] - 10, self.position[1], (self.position[2] + 2 ) - i], parent = self.parent)
self.__fingers[obj].setupRig()
cmds.parentConstraint(self.masterGuide, common.getParent(self.__fingers[obj].masterGuide), mo = True)
for guide in self.__fingers[obj].getGuides():
#tag the guide control with a tag_guides attribute
tagAttr = attribute.addAttr(guide, 'hand_guides', attrType = 'message')
attribute.connect('%s.tag_guides' % self.setupRigGrp, tagAttr)
#end loop
#end loop
#end elif
#create joint and guide
if not common.isValid(self.handJoint):
joint.create(self.handJoint, self.skeletonGrp, self.handPosition)
if not common.isValid(self.handJoint.replace(common.JOINT,common.CONTROL)):
self.setupCtrl(self.handGuide,self.handJoint, common.SIDE_COLOR[self._getSide()])
def rig(self):
if not self._puppetNode:
self.runSetupRig()
if common.isValid('%s_%s%s' % (self.name(), common.IK, common.FK)):
return True
cmds.parent([self.__bankInPivot,
self.__bankOutPivot,
self.__heelPivot],
w = True)
if super(Foot,self).rig():
return True
#create foot ik/fk chain and parent group to joints group
self.__footIkFk = \
ikfk.IkFkFoot(self.ankleJoint,
self.toeJoint,
name = self.name())
#list the groups for the foot ik setup
self.__footRollGroups.insert(0, 'anklePivot')
footRollGrpList = self.__footRollGroups
#create foot setup
self.__footIkFk.create(searchReplace = '%s' % common.SKINCLUSTER,
footRollGrpList = footRollGrpList)
#parent to joints group
cmds.parent(self.__footIkFk.group, self.jointsGrp)
#get position of joints
anklePosition = \
cmds.xform(self.ankleJoint, q = True, ws = True, rp = True)
ballPosition = \
cmds.xform(self.ballJoint, q = True, ws = True, rp = True)
toePosition = \
cmds.xform(self.toeJoint, q = True, ws = True, rp = True)
bankInPosition = \
cmds.xform(self.__bankInPivot, q = True, ws = True, rp = True)
bankOutPosition = \
cmds.xform(self.__bankOutPivot, q = True, ws = True, rp = True)
heelPosition = \
cmds.xform(self.__heelPivot, q = True, ws = True, rp = True)
#delete pivot joints
for jnt in (self.__heelPivot,self.__bankOutPivot, self.__bankInPivot):
cmds.delete(jnt)
#end loop
#get foot roll groups
footRollGroups = self.__footIkFk.getFootRolls()
handles = self.__footIkFk.getIkHandles()
#position foot roll groups
for grp in footRollGroups:
if grp in ['ballRoll', 'toeBend']:
cmds.xform(footRollGroups[grp], ws = True, rp = ballPosition)
elif grp in ['heelRoll', 'heelPivot']:
if grp == self.__heelPivotName:
cmds.setAttr('%s.rotateOrder' % footRollGroups[grp], 2)
cmds.xform(footRollGroups[grp], ws = True, rp = heelPosition)
elif grp in ['toeRoll', 'toePivot']:
cmds.xform(footRollGroups[grp], ws = True, rp = toePosition)
elif grp in ['bankIn', self.__bankInZero]:
cmds.xform(footRollGroups[grp], ws = True, rp = bankInPosition)
elif grp in ['bankOut', self.__bankOutZero]:
cmds.xform(footRollGroups[grp], ws = True, rp = bankOutPosition)
cmds.setAttr('%s.rotateOrder' % footRollGroups[grp], 2)
elif grp in ['anklePivot']:
cmds.xform(footRollGroups[grp], ws = True, rp = anklePosition)
#end loop
#create controls
self.__footCtrl = \
control.create(name= self.name(),
type = 'implicitSphere',
parent = self.controlsGrp,
color = common.SIDE_COLOR[self._getSide()])
self.__bankInCtrl = \
control.create(name= footRollGroups[self.__bankIn] ,
type = 'implicitSphere',
parent = self.controlsGrp,
color = common.SIDE_COLOR_SECONDARY[self._getSide()])
self.__bankOutCtrl = \
control.create(name= footRollGroups[self.__bankOut] ,
type = 'implicitSphere',
parent = self.controlsGrp,
color = common.SIDE_COLOR_SECONDARY[self._getSide()])
self.__heelPivotCtrl = \
control.create(name= footRollGroups[self.__heelPivotName] ,
type = 'implicitSphere',
parent = self.controlsGrp,
color = common.SIDE_COLOR_SECONDARY[self._getSide()])
#parent of controls
parentBankOutCtrl = common.getParent(self.__bankOutCtrl)
parentBankInCtrl = common.getParent(self.__bankInCtrl)
parentHeelPivotCtrl = common.getParent(self.__heelPivotCtrl)
#scale controls
for ctrl in [self.__footCtrl,self.__bankOutCtrl, self.__bankInCtrl, self.__heelPivotCtrl]:
for i in range(len(common.getShapes(ctrl))):
control.scaleShape (ctrl, scale = [.3, .3, .3], index = i)
#place controls in correct positions
transform.matchXform(self.ankleJoint,
common.getParent(self.__footCtrl),
type = 'pose')
cmds.xform(common.getParent(self.__footCtrl),
ws = True,
r = True,
t = [0,0,-2])
cmds.delete(cmds.parentConstraint(footRollGroups['bankIn'],
parentBankInCtrl))
cmds.delete(cmds.parentConstraint(footRollGroups['bankOut'],
parentBankOutCtrl))
cmds.delete(cmds.parentConstraint(footRollGroups['heelPivot'],
parentHeelPivotCtrl))
#Decompose matrix nodes for pivots and connect the controls to them
for ctrl, grp in zip([self.__bankInCtrl, self.__bankOutCtrl, self.__heelPivotCtrl] , [footRollGroups['bankIn'], footRollGroups['bankOut'], footRollGroups[self.__heelRoll]]):
grpZero = common.getChildren(grp)[0]
dcm = cmds.createNode('decomposeMatrix',
n = '%s_%s' % (grp, common.DECOMPOSEMATRIX))
mdn = cmds.createNode('multiplyDivide',
n = '%s_%s' % (grp, common.MULTIPLYDIVIDE))
attribute.connect('%s.worldMatrix[0]' % ctrl, '%s.inputMatrix' % dcm)
#connect controls to pivots
attribute.connect('%s.outputTranslate' % dcm, '%s.rotatePivot' % grp)
attribute.connect('%s.outputTranslate' % dcm, '%s.rotatePivot' % grpZero)
#Change attributes on Multiply divide node and make connections
cmds.setAttr('%s.input2Y' % mdn, -1)
attribute.connect('%s.ry' % ctrl, '%s.input1Y' % mdn)
attribute.connect('%s.outputY' % mdn, '%s.ry' % grpZero)
attribute.connect('%s.ry' % ctrl, '%s.ry' % grp)
#parent constrain the foot control to the ankle joint
for node in [self.__footCtrl,parentBankOutCtrl, parentBankInCtrl, parentHeelPivotCtrl]:
cmds.parentConstraint(footRollGroups['anklePivot'], node, mo = True)
#add attributes to the foot control and connect them to the pivots
ikfkAttr = \
attribute.addAttr(self.__footCtrl,
'ikfk' ,
attrType = 'enum',
defValue = ['off', 'on'],
value = 0)
bankAttr = \
attribute.addAttr(self.__footCtrl,
'bank' ,
attrType = 'double',
defValue = 0,
min = -10,
max = 10)
ballRollAttr = \
attribute.addAttr(self.__footCtrl,
self.__ballRoll ,
attrType = 'double',
defValue = 0,
min = 0,
max = 10)
toeRollAttr = \
attribute.addAttr(self.__footCtrl,
self.__toeRoll ,
attrType = 'double',
defValue = 0,
min = 0,
max = 10)
toePivotAttr = \
attribute.addAttr(self.__footCtrl,
self.__toePivot ,
attrType = 'double',
defValue = 0,
min = -10,
max = 10)
toeBendAttr = \
attribute.addAttr(self.__footCtrl,
self.__toeBend ,
attrType = 'double',
defValue = 0,
min = -10,
max = 10)
heelRollAttr = \
attribute.addAttr(self.__footCtrl,
self.__heelRoll ,
attrType = 'double',
defValue = 0,
min = -10,
max = 0)
heelPivotAttr = \
attribute.addAttr(self.__footCtrl,
self.__heelPivotName ,
attrType = 'double',
defValue = 0,
min = -10,
max = 10)
self.__footRollAttrs.extend([ikfkAttr,
bankAttr,
ballRollAttr,
toeRollAttr ,
toePivotAttr,
toeBendAttr,
heelRollAttr,
heelPivotAttr])
#create remap dictionary to place remap nodes in based on foot roll group names
ramapNodes = dict()
#create remap nodes and connect them to foot roll groups
for attr in [bankAttr,toePivotAttr,toeBendAttr,heelPivotAttr]:
node, attrName = attr.split('.')
ramapNodes[attrName] = \
cmds.createNode('remapValue',
n = '%s_%s_%s' % (node, attrName, common.REMAP))
attribute.connect(attr, '%s.inputValue' % ramapNodes[attrName])
cmds.setAttr('%s.outputMax' % ramapNodes[attrName], 100)
cmds.setAttr('%s.outputMin' % ramapNodes[attrName], -100)
cmds.setAttr('%s.inputMax' % ramapNodes[attrName], 10)
cmds.setAttr('%s.inputMin' % ramapNodes[attrName], -10)
#end loop
for attr in [ballRollAttr,toeRollAttr, heelRollAttr]:
node, attrName = attr.split('.')
ramapNodes[attrName] = \
cmds.createNode('remapValue',
n = '%s_%s_%s' % (node, attrName, common.REMAP))
attribute.connect(attr, '%s.inputValue' % ramapNodes[attrName])
cmds.setAttr('%s.outputMax' % ramapNodes[attrName], 100)
cmds.setAttr('%s.outputMin' % ramapNodes[attrName], 0)
cmds.setAttr('%s.inputMax' % ramapNodes[attrName], 10)
cmds.setAttr('%s.inputMin' % ramapNodes[attrName], 0)
if attr == heelRollAttr:
cmds.setAttr('%s.outputMax' % ramapNodes[attrName], 0)
cmds.setAttr('%s.outputMin' % ramapNodes[attrName], -100)
cmds.setAttr('%s.inputMax' % ramapNodes[attrName], 0)
cmds.setAttr('%s.inputMin' % ramapNodes[attrName], -10)
#end if
#end loop
#connect remap nodes to roll groups
#---Bank In/Out---
if self._getSide() == common.LEFT:
attribute.connect('%s.outValue' % ramapNodes['bank'],
'%s.rz' % footRollGroups[self.__bankIn])
attribute.connect('%s.outValue' % ramapNodes['bank'],
'%s.rz' % footRollGroups[self.__bankOut])
cmds.transformLimits(footRollGroups[self.__bankIn],
rz =[0, 100],
erz = [1, 1])
cmds.transformLimits(footRollGroups[self.__bankOut],
rz =[-100, 0],
erz = [1, 1])
elif self._getSide() == common.RIGHT:
invertMDN = \
cmds.createNode('multiplyDivide',
n = '%s_bankInvert_%s' % (self._getSide(),
common.MULTIPLYDIVIDE))
cmds.setAttr('%s.input2X' % invertMDN, -1)
attribute.connect('%s.outValue' % ramapNodes['bank'],
'%s.input1X' % invertMDN)
attribute.connect('%s.outputX' % invertMDN,
'%s.rz' % footRollGroups[self.__bankIn])
attribute.connect('%s.outputX' % invertMDN,
'%s.rz' % footRollGroups[self.__bankOut])
cmds.transformLimits(footRollGroups[self.__bankIn],
rz =[-100, 0],
erz = [1, 1])
cmds.transformLimits(footRollGroups[self.__bankOut],
rz =[0, 100],
erz = [1, 1])
#---Ball Roll---
attribute.connect('%s.outValue' % ramapNodes[self.__ballRoll],
'%s.rx' % footRollGroups[self.__ballRoll])
#---Toe Roll---
attribute.connect('%s.outValue' % ramapNodes[self.__toeRoll],
'%s.rx' % footRollGroups[self.__toeRoll])
#---Toe Pivot---
attribute.connect('%s.outValue' % ramapNodes[self.__toePivot],
'%s.ry' % footRollGroups[self.__toePivot])
#---Heel Roll---
attribute.connect('%s.outValue' % ramapNodes[self.__heelRoll],
'%s.rx' % footRollGroups[self.__heelRoll])
#---Heel Pivot---
attribute.connect('%s.outValue' % ramapNodes[self.__heelPivotName],
'%s.ry' % footRollGroups[self.__heelPivotName])
#---IK/FK---
attribute.connect(ikfkAttr,
'%s.ikfk' % self.__footIkFk.group)
#---Ball Roll---
attribute.connect('%s.outValue' % ramapNodes[self.__toeBend],
'%s.rx' % footRollGroups[self.__toeBend])
#connect fk joints to the ankle pivot
#cmds.parentConstraint(footRollGroups['anklePivot'], self.__footIkFk.fkJoints[0], mo = True)
#connecting visibility of control shapes to the controls
ikfkReverse = \
cmds.createNode('reverse', n = '%s_%s' % (self.name(),common.REVERSE))
attribute.connect(ikfkAttr, '%s.inputX' % ikfkReverse)
for ikCtrl in [self.__bankInCtrl,self.__bankOutCtrl,self.__heelPivotCtrl]:
cmds.setAttr('%s.rotateOrder' % ikCtrl, 2)
for shape in common.getShapes(ikCtrl):
if shape:
attribute.connect('%s.outputX' % ikfkReverse, '%s.v' % shape)
#----FK Setup---
fkCtrls = list()
parent = self.controlsGrp
for jnt in self.__footIkFk.fkJoints:
if jnt == self.__footIkFk.fkJoints[-1]:
continue
#end if
ctrl = \
control.create(name= jnt.split('_%s' % common.JOINT)[0],
type = 'circle',
parent = parent,
color = common.SIDE_COLOR[self._getSide()])
ctrlParent = common.getParent(ctrl)
transform.matchXform(jnt, ctrlParent, type = 'pose')
cmds.parentConstraint(ctrl, jnt, mo = True) #----> might change this to connect rotations and not use translation
if jnt == self.__footIkFk.fkJoints[0]:
cmds.parentConstraint(footRollGroups['anklePivot'],
ctrlParent,
mo = True)
#end if
#connect visibility of shapes to foot control
for shape in common.getShapes(ctrl):
attribute.connect(ikfkAttr, '%s.v' % shape)
#end for
parent = ctrl
fkCtrls.append(ctrl)
#assign hooks
self.hookRoot.extend([footRollGroups['anklePivot'], common.getParent(fkCtrls[0])])
self.hookPoint.extend([footRollGroups['ballRoll']])
