class Node(object):
"""
Create a new Node for communication with an NDN hub with the given Transport
object and connectionInfo.
:param Transport transport: An object of a subclass of Transport used for
communication.
:param Transport.ConnectionInfo connectionInfo: An object of a subclass of
Transport.ConnectionInfo to be used to connect to the transport.
"""
def __init__(self, transport, connectionInfo):
self._transport = transport
self._connectionInfo = connectionInfo
self._pendingInterestTable = PendingInterestTable()
self._interestFilterTable = InterestFilterTable()
self._registeredPrefixTable = RegisteredPrefixTable(
self._interestFilterTable)
self._delayedCallTable = DelayedCallTable()
# An array of function objects
self._onConnectedCallbacks = []
self._commandInterestGenerator = CommandInterestGenerator()
self._timeoutPrefix = Name("/local/timeout")
self._lastEntryId = 0
self._lastEntryIdLock = threading.Lock()
self._connectStatus = Node._ConnectStatus.UNCONNECTED
def expressInterest(self, pendingInterestId, interestCopy, onData,
onTimeout, onNetworkNack, wireFormat, face):
"""
Send the Interest through the transport, read the entire response and
call onData, onTimeout or onNetworkNack as described below.
:param int pendingInterestId: The getNextEntryId() for the pending
interest ID which Face got so it could return it to the caller.
:param Interest interestCopy: The Interest which is NOT copied for this
internal Node method. The Face expressInterest is responsible for
making a copy for Node to use.
:param onData: When a matching data packet is received, this calls
onData(interest, data) where interest is the Interest given to
expressInterest and data is the received Data object.
:type onData: function object
:param onTimeout: If the interest times out according to the interest
lifetime, this calls onTimeout(interest) where interest is the
Interest given to expressInterest. If onTimeout is None, this does not
use it.
:type onTimeout: function object
:param onNetworkNack: When a network Nack packet for the interest is
received and onNetworkNack is not None, this calls
onNetworkNack(interest, networkNack) and does not call onTimeout.
interest is the sent Interest and networkNack is the received
NetworkNack. However, if a network Nack is received and onNetworkNack
is None, do nothing and wait for the interest to time out.
:type onNetworkNack: function object
:param wireFormat: A WireFormat object used to encode the message.
:type wireFormat: a subclass of WireFormat
:param Face face: The face which has the callLater method, used for
interest timeouts. The callLater method may be overridden in a
subclass of Face.
:throws: RuntimeError If the encoded interest size exceeds
getMaxNdnPacketSize().
"""
# Set the nonce in our copy of the Interest so it is saved in the PIT.
interestCopy.setNonce(Node._nonceTemplate)
interestCopy.refreshNonce()
if self._connectStatus == self._ConnectStatus.CONNECT_COMPLETE:
# We are connected. Simply send the interest.
self._expressInterestHelper(pendingInterestId, interestCopy,
onData, onTimeout, onNetworkNack,
wireFormat, face)
return
# TODO: Properly check if we are already connected to the expected host.
if not self._transport.isAsync():
# The simple case: Just do a blocking connect and express.
self._transport.connect(self._connectionInfo, self, None)
self._expressInterestHelper(pendingInterestId, interestCopy,
onData, onTimeout, onNetworkNack,
wireFormat, face)
# Make future calls to expressInterest send directly to the Transport.
self._connectStatus = self._ConnectStatus.CONNECT_COMPLETE
return
# Handle the async case.
if self._connectStatus == Node._ConnectStatus.UNCONNECTED:
self._connectStatus = Node._ConnectStatus.CONNECT_REQUESTED
# expressInterestHelper will be called by onConnected.
self._onConnectedCallbacks.append(
lambda: self._expressInterestHelper(
pendingInterestId, interestCopy, onData, onTimeout,
onNetworkNack, wireFormat, face))
def onConnected():
# Assume that further calls to expressInterest dispatched to the
# event loop are queued and won't enter expressInterest until
# this method completes and sets CONNECT_COMPLETE.
# Call each callback added while the connection was opening.
for onConnectedCallback in self._onConnectedCallbacks:
onConnectedCallback()
self._onConnectedCallbacks = []
# Make future calls to expressInterest send directly to the
# Transport.
self._connectStatus = Node._ConnectStatus.CONNECT_COMPLETE
self._transport.connect(self._connectionInfo, self, onConnected)
elif self._connectStatus == self._ConnectStatus.CONNECT_REQUESTED:
# Still connecting. add to the interests to express by onConnected.
self._onConnectedCallbacks.append(
lambda: self._expressInterestHelper(
pendingInterestId, interestCopy, onData, onTimeout,
onNetworkNack, wireFormat, face))
else:
# Don't expect this to happen.
raise RuntimeError("Node: Unrecognized _connectStatus " +
str(self._connectStatus))
def removePendingInterest(self, pendingInterestId):
"""
Remove the pending interest entry with the pendingInterestId from the
pending interest table. This does not affect another pending interest
with a different pendingInterestId, even if it has the same interest
name. If there is no entry with the pendingInterestId, do nothing.
:param int pendingInterestId: The ID returned from expressInterest.
"""
self._pendingInterestTable.removePendingInterest(pendingInterestId)
def makeCommandInterest(self, interest, keyChain, certificateName,
wireFormat):
"""
Append a timestamp component and a random value component to interest's
name. Then use the keyChain and certificateName to sign the interest.
If the interest lifetime is not set, this sets it.
:param Interest interest: The interest whose name is append with
components.
:param KeyChain keyChain: The KeyChain for calling sign.
:param Name certificateName: The certificate name of the key to use for
signing.
:param wireFormat: A WireFormat object used to encode the
SignatureInfo and to encode the interest name for signing.
:type wireFormat: A subclass of WireFormat
"""
self._commandInterestGenerator.generate(interest, keyChain,
certificateName, wireFormat)
def registerPrefix(self, registeredPrefixId, prefixCopy, onInterest,
onRegisterFailed, onRegisterSuccess, flags, wireFormat,
commandKeyChain, commandCertificateName, face):
"""
Register prefix with the connected NDN hub and call onInterest when a
matching interest is received. To register a prefix with NFD, you must
first call setCommandSigningInfo.
:param int registeredPrefixId: The getNextEntryId() for the registered
prefix ID which Face got so it could return it to the caller.
:param Name prefixCopy: The Name for the prefix to register which is NOT
copied for this internal Node method. The Face registerPrefix is
responsible for making a copy for Node to use.
:param onInterest: (optional) If not None, this creates an interest
filter from prefixCopy so that when an Interest is received which matches
the filter, this calls
onInterest(prefix, interest, face, interestFilterId, filter).
NOTE: You must not change the prefix or filter objects - if you need to
change them then make a copy. If onInterest is None, it is ignored and
you must call setInterestFilter.
:type onInterest: function object
:param onRegisterFailed: A function object to call if failed to retrieve
the connected hub's ID or failed to register the prefix.
:type onRegisterFailed: function object
:param onRegisterSuccess: This calls
onRegisterSuccess(prefix, registeredPrefixId) when this receives a
success message from the forwarder. If onRegisterSuccess is None, this
does not use it.
:type onRegisterSuccess: function object
:param ForwardingFlags flags: The flags for finer control of which
interests are forwardedto the application.
:param wireFormat: A WireFormat object used to encode the message.
:type wireFormat: a subclass of WireFormat
:param KeyChain commandKeyChain: The KeyChain object for signing
interests.
:param Name commandCertificateName: The certificate name for signing
interests.
:param Face face: The face which is passed to the onInterest callback.
If onInterest is None, this is ignored.
"""
self._nfdRegisterPrefix(registeredPrefixId, prefixCopy, onInterest,
onRegisterFailed, onRegisterSuccess, flags,
commandKeyChain, commandCertificateName, face)
def removeRegisteredPrefix(self, registeredPrefixId):
"""
Remove the registered prefix entry with the registeredPrefixId from the
registered prefix table. This does not affect another registered prefix
with a different registeredPrefixId, even if it has the same prefix
name. If an interest filter was automatically created by registerPrefix,
also remove it. If there is no entry with the registeredPrefixId, do
nothing.
:param int registeredPrefixId: The ID returned from registerPrefix.
"""
self._registeredPrefixTable.removeRegisteredPrefix(registeredPrefixId)
def setInterestFilter(self, interestFilterId, filterCopy, onInterest,
face):
"""
Add an entry to the local interest filter table to call the onInterest
callback for a matching incoming Interest. This method only modifies the
library's local callback table and does not register the prefix with the
forwarder. It will always succeed. To register a prefix with the
forwarder, use registerPrefix.
:param int interestFilterId: The getNextEntryId() for the interest
filter ID which Face got so it could return it to the caller.
:param InterestFilter filterCopy: The InterestFilter with a prefix and
optional regex filter used to match the name of an incoming Interest,
which is NOT copied for this internal Node method. The Face
setInterestFilter is responsible for making a copy for Node to use.
:param onInterest: When an Interest is received which matches the filter,
this calls onInterest(prefix, interest, face, interestFilterId, filter).
:type onInterest: function object
:param Face face: The face which is passed to the onInterest callback.
"""
self._interestFilterTable.setInterestFilter(interestFilterId,
InterestFilter(filterCopy),
onInterest, face)
def unsetInterestFilter(self, interestFilterId):
"""
Remove the interest filter entry which has the interestFilterId from the
interest filter table. This does not affect another interest filter with
a different interestFilterId, even if it has the same prefix name. If
there is no entry with the interestFilterId, do nothing.
:param int interestFilterId: The ID returned from setInterestFilter.
"""
self._interestFilterTable.unsetInterestFilter(interestFilterId)
def send(self, encoding):
"""
Send the encoded packet out through the transport.
:param encoding: The array of bytes for the encoded packet to send.
:type encoding: An array type with int elements
:throws: RuntimeError If the packet size exceeds getMaxNdnPacketSize().
"""
if len(encoding) > self.getMaxNdnPacketSize():
raise RuntimeError(
"The encoded packet size exceeds the maximum limit getMaxNdnPacketSize()"
)
self._transport.send(encoding)
def processEvents(self):
"""
Process any packets to receive and call callbacks such as onData,
onInterest or onTimeout. This returns immediately if there is no data to
receive. This blocks while calling the callbacks. You should repeatedly
call this from an event loop, with calls to sleep as needed so that the
loop doesn't use 100% of the CPU. Since processEvents modifies the pending
interest table, your application should make sure that it calls
processEvents in the same thread as expressInterest (which also modifies
the pending interest table).
:raises: This may raise an exception for reading data or in the callback
for processing the data. If you call this from an main event loop,
you may want to catch and log/disregard all exceptions.
"""
self._transport.processEvents()
# If Face.callLater is overridden to use a different mechanism, then
# processEvents is not needed to check for delayed calls.
self._delayedCallTable.callTimedOut()
def getTransport(self):
"""
Get the transport object given to the constructor.
:return: The transport object.
:rtype: Transport
"""
return self._transport
def getConnectionInfo(self):
"""
Get the connectionInfo object given to the constructor.
:return: The connectionInfo object.
:rtype: Transport.ConnectionInfo
"""
return self._connectionInfo
def onReceivedElement(self, element):
"""
This is called by the transport's ElementReader to process an
entire received Data or Interest element.
:param element: The bytes of the incoming element.
:type element: An array type with int elements
"""
lpPacket = None
if element[0] == Tlv.LpPacket_LpPacket:
# Decode the LpPacket and replace element with the fragment.
lpPacket = LpPacket()
# Set copy False so that the fragment is a slice which will be
# copied below. The header fields are all integers and don't need to
# be copied.
TlvWireFormat.get().decodeLpPacket(lpPacket, element, False)
element = lpPacket.getFragmentWireEncoding().buf()
# First, decode as Interest or Data.
interest = None
data = None
decoder = TlvDecoder(element)
if decoder.peekType(Tlv.Interest, len(element)):
interest = Interest()
interest.wireDecode(element, TlvWireFormat.get())
if lpPacket != None:
interest.setLpPacket(lpPacket)
elif decoder.peekType(Tlv.Data, len(element)):
data = Data()
data.wireDecode(element, TlvWireFormat.get())
if lpPacket != None:
data.setLpPacket(lpPacket)
if lpPacket != None:
# We have decoded the fragment, so remove the wire encoding to save
# memory.
lpPacket.setFragmentWireEncoding(Blob())
networkNack = NetworkNack.getFirstHeader(lpPacket)
if networkNack != None:
if interest == None:
# We got a Nack but not for an Interest, so drop the packet.
return
pendingInterests = []
self._pendingInterestTable.extractEntriesForNackInterest(
interest, pendingInterests)
for pendingInterest in pendingInterests:
try:
pendingInterest.getOnNetworkNack()(
pendingInterest.getInterest(), networkNack)
except:
logging.exception("Error in onNetworkNack")
# We have processed the network Nack packet.
return
# Now process as Interest or Data.
if interest != None:
# Call all interest filter callbacks which match.
matchedFilters = []
self._interestFilterTable.getMatchedFilters(
interest, matchedFilters)
for i in range(len(matchedFilters)):
entry = matchedFilters[i]
includeFilter = True
onInterestCall = entry.getOnInterest()
# If onInterest is not a function nor a method assumes it is a
# calleable object
if (not inspect.isfunction(onInterestCall)
and not inspect.ismethod(onInterestCall)):
onInterestCall = onInterestCall.__call__
# Use getcallargs to test if onInterest accepts 5 args.
try:
inspect.getcallargs(onInterestCall, None, None, None, None,
None)
except TypeError:
# Assume onInterest is old-style with 4 arguments.
includeFilter = False
if includeFilter:
try:
entry.getOnInterest()(entry.getFilter().getPrefix(),
interest, entry.getFace(),
entry.getInterestFilterId(),
entry.getFilter())
except:
logging.exception("Error in onInterest")
else:
# Old-style onInterest without the filter argument. We
# still pass a Face instead of Transport since Face also
# has a send method.
try:
entry.getOnInterest()(entry.getFilter().getPrefix(),
interest, entry.getFace(),
entry.getInterestFilterId())
except:
logging.exception("Error in onInterest")
elif data != None:
pendingInterests = []
self._pendingInterestTable.extractEntriesForExpressedInterest(
data, pendingInterests)
for pendingInterest in pendingInterests:
try:
pendingInterest.getOnData()(pendingInterest.getInterest(),
data)
except:
logging.exception("Error in onData")
def isLocal(self):
"""
Check if the face is local based on the current connection through the
Transport; some Transport may cause network I/O (e.g. an IP host name
lookup).
:return: True if the face is local, False if not.
:rtype bool:
"""
return self._transport.isLocal(self._connectionInfo)
def shutdown(self):
"""
Call getTransport().close().
"""
self._transport.close()
@staticmethod
def getMaxNdnPacketSize():
"""
Get the practical limit of the size of a network-layer packet. If a packet
is larger than this, the library or application MAY drop it.
:return: The maximum NDN packet size.
:rtype: int
"""
return Common.MAX_NDN_PACKET_SIZE
def _expressInterestHelper(self, pendingInterestId, interestCopy, onData,
onTimeout, onNetworkNack, wireFormat, face):
"""
Do the work of expressInterest once we know we are connected. Add the
entry to the PIT, encode and send the interest.
:param int pendingInterestId: The getNextEntryId() for the pending
interest ID which Face got so it could return it to the caller.
:param Interest interestCopy: The Interest to send, which has already
been copied.
:param onData: A function object to call when a matching data packet is
received.
:type onData: function object
:param onTimeout: A function object to call if the interest times out.
If onTimeout is None, this does not use it.
:type onTimeout: function object
:param onNetworkNack: A function object to call when a network Nack
packet is received.
:type onNetworkNack: function object
:param wireFormat: A WireFormat object used to encode the message.
:type wireFormat: a subclass of WireFormat
:param Face face: The face which has the callLater method, used for
interest timeouts. The callLater method may be overridden in a
subclass of Face.
:throws: RuntimeError If the encoded interest size exceeds
getMaxNdnPacketSize().
"""
pendingInterest = self._pendingInterestTable.add(
pendingInterestId, interestCopy, onData, onTimeout, onNetworkNack)
if pendingInterest == None:
# removePendingInterest was already called with the pendingInterestId.
return
if (onTimeout or interestCopy.getInterestLifetimeMilliseconds() != None
and interestCopy.getInterestLifetimeMilliseconds() >= 0.0):
# Set up the timeout.
delayMilliseconds = interestCopy.getInterestLifetimeMilliseconds()
if delayMilliseconds == None or delayMilliseconds < 0.0:
# Use a default timeout delay.
delayMilliseconds = 4000.0
face.callLater(
delayMilliseconds,
lambda: self._processInterestTimeout(pendingInterest))
# Special case: For _timeoutPrefix we don't actually send the interest.
if not self._timeoutPrefix.match(interestCopy.getName()):
encoding = interestCopy.wireEncode(wireFormat)
if encoding.size() > self.getMaxNdnPacketSize():
raise RuntimeError(
"The encoded interest size exceeds the maximum limit getMaxNdnPacketSize()"
)
self._transport.send(encoding.toBuffer())
def _nfdRegisterPrefix(self, registeredPrefixId, prefix, onInterest,
onRegisterFailed, onRegisterSuccess, flags,
commandKeyChain, commandCertificateName, face):
"""
Do the work of registerPrefix to register with NFD.
:param int registeredPrefixId: The getNextEntryId() which registerPrefix
got so it could return it to the caller. If this is 0, then don't add
to _registeredPrefixTable (assuming it has already been done).
"""
if commandKeyChain == None:
raise RuntimeError(
"registerPrefix: The command KeyChain has not been set. You must call setCommandSigningInfo."
)
if commandCertificateName.size() == 0:
raise RuntimeError(
"registerPrefix: The command certificate name has not been set. You must call setCommandSigningInfo."
)
controlParameters = ControlParameters()
controlParameters.setName(prefix)
controlParameters.setForwardingFlags(flags)
commandInterest = Interest()
if self.isLocal():
commandInterest.setName(Name("/localhost/nfd/rib/register"))
# The interest is answered by the local host, so set a short timeout.
commandInterest.setInterestLifetimeMilliseconds(2000.0)
else:
commandInterest.setName(Name("/localhop/nfd/rib/register"))
# The host is remote, so set a longer timeout.
commandInterest.setInterestLifetimeMilliseconds(4000.0)
# NFD only accepts TlvWireFormat packets.
commandInterest.getName().append(
controlParameters.wireEncode(TlvWireFormat.get()))
self.makeCommandInterest(commandInterest, commandKeyChain,
commandCertificateName, TlvWireFormat.get())
# Send the registration interest.
response = Node._RegisterResponse(prefix, onRegisterFailed,
onRegisterSuccess,
registeredPrefixId, self, onInterest,
face)
self.expressInterest(self.getNextEntryId(), commandInterest,
response.onData, response.onTimeout, None,
TlvWireFormat.get(), face)
def callLater(self, delayMilliseconds, callback):
"""
Call callback() after the given delay. This adds to
self._delayedCallTable which is used by processEvents().
:param float delayMilliseconds: The delay in milliseconds.
:param callback: This calls callback() after the delay.
:type callback: function object
"""
self._delayedCallTable.callLater(delayMilliseconds, callback)
def _processInterestTimeout(self, pendingInterest):
"""
This is used in callLater for when the pending interest expires. If
the pendingInterest is still in the _pendingInterestTable, remove it and
call its onTimeout callback.
"""
if self._pendingInterestTable.removeEntry(pendingInterest):
pendingInterest.callTimeout()
def getNextEntryId(self):
"""
Get the next unique entry ID for the pending interest table, interest
filter table, etc. This uses a threading.Lock() to be thread safe. Most
entry IDs are for the pending interest table (there usually are not many
interest filter table entries) so we use a common pool to only have to
do the thread safe lock in one method which is called by Face.
:return: The next entry ID.
:rtype: int
"""
with self._lastEntryIdLock:
self._lastEntryId += 1
return self._lastEntryId
class _ConnectStatus(object):
UNCONNECTED = 1
CONNECT_REQUESTED = 2
CONNECT_COMPLETE = 3
class _RegisterResponse(object):
"""
A _RegisterResponse receives the response Data packet from the register
prefix interest sent to the connected NDN hub. If this gets a bad
response or a timeout, call onRegisterFailed.
"""
def __init__(self, prefix, onRegisterFailed, onRegisterSuccess,
registeredPrefixId, parent, onInterest, face):
self._prefix = prefix
self._onRegisterFailed = onRegisterFailed
self._onRegisterSuccess = onRegisterSuccess
self._registeredPrefixId = registeredPrefixId
self._parent = parent
self._onInterest = onInterest
self._face = face
def onData(self, interest, responseData):
"""
We received the response.
"""
# Decode responseData.getContent() and check for a success code.
controlResponse = ControlResponse()
try:
controlResponse.wireDecode(responseData.getContent(),
TlvWireFormat.get())
except ValueError as ex:
logging.getLogger(__name__).info(
"Register prefix failed: Error decoding the NFD response: %s",
str(ex))
try:
self._onRegisterFailed(self._prefix)
except:
logging.exception("Error in onRegisterFailed")
return
# Status code 200 is "OK".
if controlResponse.getStatusCode() != 200:
logging.getLogger(__name__).info(
"Register prefix failed: Expected NFD status code 200, got: %d",
controlResponse.getStatusCode())
try:
self._onRegisterFailed(self._prefix)
except:
logging.exception("Error in onRegisterFailed")
return
# Success, so we can add to the registered prefix table.
if self._registeredPrefixId != 0:
interestFilterId = 0
if self._onInterest != None:
# registerPrefix was called with the "combined" form that includes
# the callback, so add an InterestFilterEntry.
interestFilterId = self._parent.getNextEntryId()
self._parent.setInterestFilter(
interestFilterId, InterestFilter(self._prefix),
self._onInterest, self._face)
if not self._parent._registeredPrefixTable.add(
self._registeredPrefixId, self._prefix,
interestFilterId):
# removeRegisteredPrefix was already called with the registeredPrefixId.
if interestFilterId > 0:
# Remove the related interest filter we just added.
self._parent.unsetInterestFilter(interestFilterId)
return
logging.getLogger(__name__).info(
"Register prefix succeeded with the NFD forwarder for prefix %s",
self._prefix.toUri())
if self._onRegisterSuccess != None:
try:
self._onRegisterSuccess(self._prefix,
self._registeredPrefixId)
except:
logging.exception("Error in onRegisterSuccess")
def onTimeout(self, interest):
"""
We timed out waiting for the response.
"""
logging.getLogger(__name__).info(
"Timeout for NFD register prefix command.")
try:
self._onRegisterFailed(self._prefix)
except:
logging.exception("Error in onRegisterFailed")
_nonceTemplate = Blob(bytearray(4), False)
class InterestFilter(object):
"""
Create an InterestFilter to match any Interest whose name starts with the
given prefix. If the optional regexFilter is provided then the remaining
components match the regexFilter regular expression as described in
doesMatch.
:param prefix: The prefix. If a Name then this makes a copy of the Name.
Otherwise it create a Name from the URI string.
:type prefix: Name or str
:param str regexFilter: (optional) The regular expression for matching the
remaining name components.
"""
def __init__(self, prefix, regexFilter = None):
if type(prefix) is InterestFilter:
interestFilter = prefix
# The copy constructor.
self._prefix = Name(interestFilter._prefix)
self._regexFilter = interestFilter._regexFilter
self._regexFilterPattern = interestFilter._regexFilterPattern
else:
self._prefix = Name(prefix)
self._regexFilter = regexFilter
if regexFilter != None:
self._regexFilterPattern = self.makePattern(regexFilter)
else:
self._regexFilterPattern = None
def doesMatch(self, name):
"""
Check if the given name matches this filter. Match if name starts with
this filter's prefix. If this filter has the optional regexFilter then
the remaining components match the regexFilter regular expression.
For example, the following InterestFilter:
InterestFilter("/hello", "<world><>+")
will match all Interests, whose name has the prefix `/hello` which is
followed by a component `world` and has at least one more component
after it. Examples:
/hello/world/!
/hello/world/x/y/z
Note that the regular expression will need to match all remaining
components (e.g., there are implicit heading `^` and trailing `$`
symbols in the regular expression).
:param Name name: The name to check against this filter.
:return: True if name matches this filter, otherwise False.
:rtype: bool
"""
if len(name) < len(self._prefix):
return False
if self.hasRegexFilter():
# Perform a prefix match and regular expression match for the
# remaining components.
if not self._prefix.match(name):
return False
return None != NdnRegexMatcher.match(
self._regexFilterPattern, name.getSubName(len(self._prefix)))
else:
# Just perform a prefix match.
return self._prefix.match(name)
def getPrefix(self):
"""
Get the prefix given to the constructor.
:return: The prefix Name which you should not modify.
:rtype: Name
"""
return self._prefix
def hasRegexFilter(self):
"""
Check if a regexFilter was supplied to the constructor.
:return: True if a regexFilter was supplied to the constructor.
:rtype: bool
"""
return self._regexFilter != None
def getRegexFilter(self):
"""
Get the regex filter. This is only valid if hasRegexFilter() is True.
:return: The regular expression for matching the remaining name
components.
:rtype: str
"""
return self._regexFilter
@staticmethod
def makePattern(regexFilter):
"""
If regexFilter doesn't already have them, add ^ to the beginning and $
to the end since these are required by NdnRegexMatcher.match.
:param str regexFilter: The regex filter.
:return: The regex pattern with ^ and $.
:rtype str:
"""
if len(regexFilter) == 0:
# We don't expect this.
return "^$"
pattern = regexFilter
if pattern[0] != '^':
pattern = "^" + pattern
if pattern[-1] != '$':
pattern = pattern + "$"
return pattern
class Node(object):
"""
Create a new Node for communication with an NDN hub with the given Transport
object and connectionInfo.
:param Transport transport: An object of a subclass of Transport used for
communication.
:param Transport.ConnectionInfo connectionInfo: An object of a subclass of
Transport.ConnectionInfo to be used to connect to the transport.
"""
def __init__(self, transport, connectionInfo):
self._transport = transport
self._connectionInfo = connectionInfo
self._pendingInterestTable = PendingInterestTable()
self._interestFilterTable = InterestFilterTable()
self._registeredPrefixTable = RegisteredPrefixTable(self._interestFilterTable)
self._delayedCallTable = DelayedCallTable()
# An array of function objects
self._onConnectedCallbacks = []
self._commandInterestGenerator = CommandInterestGenerator()
self._timeoutPrefix = Name("/local/timeout")
self._lastEntryId = 0
self._lastEntryIdLock = threading.Lock()
self._connectStatus = Node._ConnectStatus.UNCONNECTED
def expressInterest(
self, pendingInterestId, interestCopy, onData, onTimeout, onNetworkNack,
wireFormat, face):
"""
Send the Interest through the transport, read the entire response and
call onData, onTimeout or onNetworkNack as described below.
:param int pendingInterestId: The getNextEntryId() for the pending
interest ID which Face got so it could return it to the caller.
:param Interest interestCopy: The Interest which is NOT copied for this
internal Node method. The Face expressInterest is responsible for
making a copy for Node to use.
:param onData: When a matching data packet is received, this calls
onData(interest, data) where interest is the Interest given to
expressInterest and data is the received Data object.
:type onData: function object
:param onTimeout: If the interest times out according to the interest
lifetime, this calls onTimeout(interest) where interest is the
Interest given to expressInterest. If onTimeout is None, this does not
use it.
:type onTimeout: function object
:param onNetworkNack: When a network Nack packet for the interest is
received and onNetworkNack is not None, this calls
onNetworkNack(interest, networkNack) and does not call onTimeout.
interest is the sent Interest and networkNack is the received
NetworkNack. However, if a network Nack is received and onNetworkNack
is None, do nothing and wait for the interest to time out.
:type onNetworkNack: function object
:param wireFormat: A WireFormat object used to encode the message.
:type wireFormat: a subclass of WireFormat
:param Face face: The face which has the callLater method, used for
interest timeouts. The callLater method may be overridden in a
subclass of Face.
:throws: RuntimeError If the encoded interest size exceeds
getMaxNdnPacketSize().
"""
# Set the nonce in our copy of the Interest so it is saved in the PIT.
interestCopy.setNonce(Node._nonceTemplate)
interestCopy.refreshNonce()
if self._connectStatus == self._ConnectStatus.CONNECT_COMPLETE:
# We are connected. Simply send the interest.
self._expressInterestHelper(
pendingInterestId, interestCopy, onData, onTimeout, onNetworkNack,
wireFormat, face)
return
# TODO: Properly check if we are already connected to the expected host.
if not self._transport.isAsync():
# The simple case: Just do a blocking connect and express.
self._transport.connect(self._connectionInfo, self, None);
self._expressInterestHelper(pendingInterestId,
interestCopy, onData, onTimeout, onNetworkNack, wireFormat, face)
# Make future calls to expressInterest send directly to the Transport.
self._connectStatus = self._ConnectStatus.CONNECT_COMPLETE
return
# Handle the async case.
if self._connectStatus == Node._ConnectStatus.UNCONNECTED:
self._connectStatus = Node._ConnectStatus.CONNECT_REQUESTED
# expressInterestHelper will be called by onConnected.
self._onConnectedCallbacks.append(
lambda: self._expressInterestHelper
(pendingInterestId, interestCopy, onData, onTimeout,
onNetworkNack, wireFormat, face))
def onConnected():
# Assume that further calls to expressInterest dispatched to the
# event loop are queued and won't enter expressInterest until
# this method completes and sets CONNECT_COMPLETE.
# Call each callback added while the connection was opening.
for onConnectedCallback in self._onConnectedCallbacks:
onConnectedCallback()
self._onConnectedCallbacks = []
# Make future calls to expressInterest send directly to the
# Transport.
self._connectStatus = Node._ConnectStatus.CONNECT_COMPLETE
self._transport.connect(self._connectionInfo, self, onConnected)
elif self._connectStatus == self._ConnectStatus.CONNECT_REQUESTED:
# Still connecting. add to the interests to express by onConnected.
self._onConnectedCallbacks.append(
lambda: self._expressInterestHelper
(pendingInterestId, interestCopy, onData, onTimeout,
onNetworkNack, wireFormat, face))
else:
# Don't expect this to happen.
raise RuntimeError(
"Node: Unrecognized _connectStatus " + str(self._connectStatus))
def removePendingInterest(self, pendingInterestId):
"""
Remove the pending interest entry with the pendingInterestId from the
pending interest table. This does not affect another pending interest
with a different pendingInterestId, even if it has the same interest
name. If there is no entry with the pendingInterestId, do nothing.
:param int pendingInterestId: The ID returned from expressInterest.
"""
self._pendingInterestTable.removePendingInterest(pendingInterestId)
def makeCommandInterest(self, interest, keyChain, certificateName, wireFormat):
"""
Append a timestamp component and a random value component to interest's
name. Then use the keyChain and certificateName to sign the interest.
If the interest lifetime is not set, this sets it.
:param Interest interest: The interest whose name is append with
components.
:param KeyChain keyChain: The KeyChain for calling sign.
:param Name certificateName: The certificate name of the key to use for
signing.
:param wireFormat: A WireFormat object used to encode the
SignatureInfo and to encode the interest name for signing.
:type wireFormat: A subclass of WireFormat
"""
self._commandInterestGenerator.generate(
interest, keyChain, certificateName, wireFormat)
def registerPrefix(
self, registeredPrefixId, prefixCopy, onInterest, onRegisterFailed,
onRegisterSuccess, flags, wireFormat, commandKeyChain,
commandCertificateName, face):
"""
Register prefix with the connected NDN hub and call onInterest when a
matching interest is received. To register a prefix with NFD, you must
first call setCommandSigningInfo.
:param int registeredPrefixId: The getNextEntryId() for the registered
prefix ID which Face got so it could return it to the caller.
:param Name prefixCopy: The Name for the prefix to register which is NOT
copied for this internal Node method. The Face registerPrefix is
responsible for making a copy for Node to use.
:param onInterest: (optional) If not None, this creates an interest
filter from prefixCopy so that when an Interest is received which matches
the filter, this calls
onInterest(prefix, interest, face, interestFilterId, filter).
NOTE: You must not change the prefix or filter objects - if you need to
change them then make a copy. If onInterest is None, it is ignored and
you must call setInterestFilter.
:type onInterest: function object
:param onRegisterFailed: A function object to call if failed to retrieve
the connected hub's ID or failed to register the prefix.
:type onRegisterFailed: function object
:param onRegisterSuccess: This calls
onRegisterSuccess(prefix, registeredPrefixId) when this receives a
success message from the forwarder. If onRegisterSuccess is None, this
does not use it.
:type onRegisterSuccess: function object
:param ForwardingFlags flags: The flags for finer control of which
interests are forwardedto the application.
:param wireFormat: A WireFormat object used to encode the message.
:type wireFormat: a subclass of WireFormat
:param KeyChain commandKeyChain: The KeyChain object for signing
interests.
:param Name commandCertificateName: The certificate name for signing
interests.
:param Face face: The face which is passed to the onInterest callback.
If onInterest is None, this is ignored.
"""
self._nfdRegisterPrefix(
registeredPrefixId, prefixCopy, onInterest,
onRegisterFailed, onRegisterSuccess, flags, commandKeyChain,
commandCertificateName, face)
def removeRegisteredPrefix(self, registeredPrefixId):
"""
Remove the registered prefix entry with the registeredPrefixId from the
registered prefix table. This does not affect another registered prefix
with a different registeredPrefixId, even if it has the same prefix
name. If an interest filter was automatically created by registerPrefix,
also remove it. If there is no entry with the registeredPrefixId, do
nothing.
:param int registeredPrefixId: The ID returned from registerPrefix.
"""
self._registeredPrefixTable.removeRegisteredPrefix(registeredPrefixId)
def setInterestFilter(self, interestFilterId, filterCopy, onInterest, face):
"""
Add an entry to the local interest filter table to call the onInterest
callback for a matching incoming Interest. This method only modifies the
library's local callback table and does not register the prefix with the
forwarder. It will always succeed. To register a prefix with the
forwarder, use registerPrefix.
:param int interestFilterId: The getNextEntryId() for the interest
filter ID which Face got so it could return it to the caller.
:param InterestFilter filterCopy: The InterestFilter with a prefix and
optional regex filter used to match the name of an incoming Interest,
which is NOT copied for this internal Node method. The Face
setInterestFilter is responsible for making a copy for Node to use.
:param onInterest: When an Interest is received which matches the filter,
this calls onInterest(prefix, interest, face, interestFilterId, filter).
:type onInterest: function object
:param Face face: The face which is passed to the onInterest callback.
"""
self._interestFilterTable.setInterestFilter(
interestFilterId, InterestFilter(filterCopy), onInterest, face)
def unsetInterestFilter(self, interestFilterId):
"""
Remove the interest filter entry which has the interestFilterId from the
interest filter table. This does not affect another interest filter with
a different interestFilterId, even if it has the same prefix name. If
there is no entry with the interestFilterId, do nothing.
:param int interestFilterId: The ID returned from setInterestFilter.
"""
self._interestFilterTable.unsetInterestFilter(interestFilterId)
def send(self, encoding):
"""
Send the encoded packet out through the transport.
:param encoding: The array of bytes for the encoded packet to send.
:type encoding: An array type with int elements
:throws: RuntimeError If the packet size exceeds getMaxNdnPacketSize().
"""
if len(encoding) > self.getMaxNdnPacketSize():
raise RuntimeError(
"The encoded packet size exceeds the maximum limit getMaxNdnPacketSize()")
self._transport.send(encoding)
def processEvents(self):
"""
Process any packets to receive and call callbacks such as onData,
onInterest or onTimeout. This returns immediately if there is no data to
receive. This blocks while calling the callbacks. You should repeatedly
call this from an event loop, with calls to sleep as needed so that the
loop doesn't use 100% of the CPU. Since processEvents modifies the pending
interest table, your application should make sure that it calls
processEvents in the same thread as expressInterest (which also modifies
the pending interest table).
:raises: This may raise an exception for reading data or in the callback
for processing the data. If you call this from an main event loop,
you may want to catch and log/disregard all exceptions.
"""
self._transport.processEvents()
# If Face.callLater is overridden to use a different mechanism, then
# processEvents is not needed to check for delayed calls.
self._delayedCallTable.callTimedOut();
def getTransport(self):
"""
Get the transport object given to the constructor.
:return: The transport object.
:rtype: Transport
"""
return self._transport
def getConnectionInfo(self):
"""
Get the connectionInfo object given to the constructor.
:return: The connectionInfo object.
:rtype: Transport.ConnectionInfo
"""
return self._connectionInfo
def onReceivedElement(self, element):
"""
This is called by the transport's ElementReader to process an
entire received Data or Interest element.
:param element: The bytes of the incoming element.
:type element: An array type with int elements
"""
lpPacket = None
if element[0] == Tlv.LpPacket_LpPacket:
# Decode the LpPacket and replace element with the fragment.
lpPacket = LpPacket()
# Set copy False so that the fragment is a slice which will be
# copied below. The header fields are all integers and don't need to
# be copied.
TlvWireFormat.get().decodeLpPacket(lpPacket, element, False)
element = lpPacket.getFragmentWireEncoding().buf()
# First, decode as Interest or Data.
interest = None
data = None
decoder = TlvDecoder(element)
if decoder.peekType(Tlv.Interest, len(element)):
interest = Interest()
interest.wireDecode(element, TlvWireFormat.get())
if lpPacket != None:
interest.setLpPacket(lpPacket)
elif decoder.peekType(Tlv.Data, len(element)):
data = Data()
data.wireDecode(element, TlvWireFormat.get())
if lpPacket != None:
data.setLpPacket(lpPacket)
if lpPacket != None:
# We have decoded the fragment, so remove the wire encoding to save
# memory.
lpPacket.setFragmentWireEncoding(Blob())
networkNack = NetworkNack.getFirstHeader(lpPacket)
if networkNack != None:
if interest == None:
# We got a Nack but not for an Interest, so drop the packet.
return
pendingInterests = []
self._pendingInterestTable.extractEntriesForNackInterest(
interest, pendingInterests)
for pendingInterest in pendingInterests:
try:
pendingInterest.getOnNetworkNack()(
pendingInterest.getInterest(), networkNack)
except:
logging.exception("Error in onNetworkNack")
# We have processed the network Nack packet.
return
# Now process as Interest or Data.
if interest != None:
# Call all interest filter callbacks which match.
matchedFilters = []
self._interestFilterTable.getMatchedFilters(interest, matchedFilters)
for i in range(len(matchedFilters)):
entry = matchedFilters[i]
includeFilter = True
onInterestCall = entry.getOnInterest()
# If onInterest is not a function nor a method assumes it is a
# calleable object
if (not inspect.isfunction(onInterestCall) and
not inspect.ismethod(onInterestCall)):
onInterestCall = onInterestCall.__call__
# Use getcallargs to test if onInterest accepts 5 args.
try:
inspect.getcallargs(onInterestCall,
None, None, None, None, None)
except TypeError:
# Assume onInterest is old-style with 4 arguments.
includeFilter = False
if includeFilter:
try:
entry.getOnInterest()(
entry.getFilter().getPrefix(), interest,
entry.getFace(), entry.getInterestFilterId(),
entry.getFilter())
except:
logging.exception("Error in onInterest")
else:
# Old-style onInterest without the filter argument. We
# still pass a Face instead of Transport since Face also
# has a send method.
try:
entry.getOnInterest()(
entry.getFilter().getPrefix(), interest,
entry.getFace(), entry.getInterestFilterId())
except:
logging.exception("Error in onInterest")
elif data != None:
pendingInterests = []
self._pendingInterestTable.extractEntriesForExpressedInterest(
data, pendingInterests)
for pendingInterest in pendingInterests:
try:
pendingInterest.getOnData()(pendingInterest.getInterest(), data)
except:
logging.exception("Error in onData")
def isLocal(self):
"""
Check if the face is local based on the current connection through the
Transport; some Transport may cause network I/O (e.g. an IP host name
lookup).
:return: True if the face is local, False if not.
:rtype bool:
"""
return self._transport.isLocal(self._connectionInfo)
def shutdown(self):
"""
Call getTransport().close().
"""
self._transport.close()
@staticmethod
def getMaxNdnPacketSize():
"""
Get the practical limit of the size of a network-layer packet. If a packet
is larger than this, the library or application MAY drop it.
:return: The maximum NDN packet size.
:rtype: int
"""
return Common.MAX_NDN_PACKET_SIZE
def _expressInterestHelper(
self, pendingInterestId, interestCopy, onData, onTimeout, onNetworkNack,
wireFormat, face):
"""
Do the work of expressInterest once we know we are connected. Add the
entry to the PIT, encode and send the interest.
:param int pendingInterestId: The getNextEntryId() for the pending
interest ID which Face got so it could return it to the caller.
:param Interest interestCopy: The Interest to send, which has already
been copied.
:param onData: A function object to call when a matching data packet is
received.
:type onData: function object
:param onTimeout: A function object to call if the interest times out.
If onTimeout is None, this does not use it.
:type onTimeout: function object
:param onNetworkNack: A function object to call when a network Nack
packet is received.
:type onNetworkNack: function object
:param wireFormat: A WireFormat object used to encode the message.
:type wireFormat: a subclass of WireFormat
:param Face face: The face which has the callLater method, used for
interest timeouts. The callLater method may be overridden in a
subclass of Face.
:throws: RuntimeError If the encoded interest size exceeds
getMaxNdnPacketSize().
"""
pendingInterest = self._pendingInterestTable.add(
pendingInterestId, interestCopy, onData, onTimeout, onNetworkNack)
if pendingInterest == None:
# removePendingInterest was already called with the pendingInterestId.
return
if (onTimeout or
interestCopy.getInterestLifetimeMilliseconds() != None and
interestCopy.getInterestLifetimeMilliseconds() >= 0.0):
# Set up the timeout.
delayMilliseconds = interestCopy.getInterestLifetimeMilliseconds()
if delayMilliseconds == None or delayMilliseconds < 0.0:
# Use a default timeout delay.
delayMilliseconds = 4000.0
face.callLater(delayMilliseconds,
lambda: self._processInterestTimeout(pendingInterest))
# Special case: For _timeoutPrefix we don't actually send the interest.
if not self._timeoutPrefix.match(interestCopy.getName()):
encoding = interestCopy.wireEncode(wireFormat)
if encoding.size() > self.getMaxNdnPacketSize():
raise RuntimeError(
"The encoded interest size exceeds the maximum limit getMaxNdnPacketSize()")
self._transport.send(encoding.toBuffer())
def _nfdRegisterPrefix(
self, registeredPrefixId, prefix, onInterest, onRegisterFailed,
onRegisterSuccess, flags, commandKeyChain, commandCertificateName, face):
"""
Do the work of registerPrefix to register with NFD.
:param int registeredPrefixId: The getNextEntryId() which registerPrefix
got so it could return it to the caller. If this is 0, then don't add
to _registeredPrefixTable (assuming it has already been done).
"""
if commandKeyChain == None:
raise RuntimeError(
"registerPrefix: The command KeyChain has not been set. You must call setCommandSigningInfo.")
if commandCertificateName.size() == 0:
raise RuntimeError(
"registerPrefix: The command certificate name has not been set. You must call setCommandSigningInfo.")
controlParameters = ControlParameters()
controlParameters.setName(prefix)
controlParameters.setForwardingFlags(flags)
commandInterest = Interest()
if self.isLocal():
commandInterest.setName(Name("/localhost/nfd/rib/register"))
# The interest is answered by the local host, so set a short timeout.
commandInterest.setInterestLifetimeMilliseconds(2000.0)
else:
commandInterest.setName(Name("/localhop/nfd/rib/register"))
# The host is remote, so set a longer timeout.
commandInterest.setInterestLifetimeMilliseconds(4000.0)
# NFD only accepts TlvWireFormat packets.
commandInterest.getName().append(controlParameters.wireEncode(TlvWireFormat.get()))
self.makeCommandInterest(
commandInterest, commandKeyChain, commandCertificateName,
TlvWireFormat.get())
# Send the registration interest.
response = Node._RegisterResponse(
prefix, onRegisterFailed, onRegisterSuccess, registeredPrefixId, self,
onInterest, face)
self.expressInterest(
self.getNextEntryId(), commandInterest, response.onData,
response.onTimeout, None, TlvWireFormat.get(), face)
def callLater(self, delayMilliseconds, callback):
"""
Call callback() after the given delay. This adds to
self._delayedCallTable which is used by processEvents().
:param float delayMilliseconds: The delay in milliseconds.
:param callback: This calls callback() after the delay.
:type callback: function object
"""
self._delayedCallTable.callLater(delayMilliseconds, callback)
def _processInterestTimeout(self, pendingInterest):
"""
This is used in callLater for when the pending interest expires. If
the pendingInterest is still in the _pendingInterestTable, remove it and
call its onTimeout callback.
"""
if self._pendingInterestTable.removeEntry(pendingInterest):
pendingInterest.callTimeout()
def getNextEntryId(self):
"""
Get the next unique entry ID for the pending interest table, interest
filter table, etc. This uses a threading.Lock() to be thread safe. Most
entry IDs are for the pending interest table (there usually are not many
interest filter table entries) so we use a common pool to only have to
do the thread safe lock in one method which is called by Face.
:return: The next entry ID.
:rtype: int
"""
with self._lastEntryIdLock:
self._lastEntryId += 1
return self._lastEntryId
class _ConnectStatus(object):
UNCONNECTED = 1
CONNECT_REQUESTED = 2
CONNECT_COMPLETE = 3
class _RegisterResponse(object):
"""
A _RegisterResponse receives the response Data packet from the register
prefix interest sent to the connected NDN hub. If this gets a bad
response or a timeout, call onRegisterFailed.
"""
def __init__(self, prefix, onRegisterFailed, onRegisterSuccess,
registeredPrefixId, parent, onInterest, face):
self._prefix = prefix
self._onRegisterFailed = onRegisterFailed
self._onRegisterSuccess = onRegisterSuccess
self._registeredPrefixId = registeredPrefixId
self._parent = parent
self._onInterest = onInterest
self._face = face
def onData(self, interest, responseData):
"""
We received the response.
"""
# Decode responseData.getContent() and check for a success code.
controlResponse = ControlResponse()
try:
controlResponse.wireDecode(responseData.getContent(), TlvWireFormat.get())
except ValueError as ex:
logging.getLogger(__name__).info(
"Register prefix failed: Error decoding the NFD response: %s",
str(ex))
try:
self._onRegisterFailed(self._prefix)
except:
logging.exception("Error in onRegisterFailed")
return
# Status code 200 is "OK".
if controlResponse.getStatusCode() != 200:
logging.getLogger(__name__).info(
"Register prefix failed: Expected NFD status code 200, got: %d",
controlResponse.getStatusCode())
try:
self._onRegisterFailed(self._prefix)
except:
logging.exception("Error in onRegisterFailed")
return
# Success, so we can add to the registered prefix table.
if self._registeredPrefixId != 0:
interestFilterId = 0
if self._onInterest != None:
# registerPrefix was called with the "combined" form that includes
# the callback, so add an InterestFilterEntry.
interestFilterId = self._parent.getNextEntryId()
self._parent.setInterestFilter(
interestFilterId, InterestFilter(self._prefix),
self._onInterest, self._face)
if not self._parent._registeredPrefixTable.add(
self._registeredPrefixId, self._prefix, interestFilterId):
# removeRegisteredPrefix was already called with the registeredPrefixId.
if interestFilterId > 0:
# Remove the related interest filter we just added.
self._parent.unsetInterestFilter(interestFilterId)
return
logging.getLogger(__name__).info(
"Register prefix succeeded with the NFD forwarder for prefix %s",
self._prefix.toUri())
if self._onRegisterSuccess != None:
try:
self._onRegisterSuccess(self._prefix, self._registeredPrefixId)
except:
logging.exception("Error in onRegisterSuccess")
def onTimeout(self, interest):
"""
We timed out waiting for the response.
"""
logging.getLogger(__name__).info(
"Timeout for NFD register prefix command.")
try:
self._onRegisterFailed(self._prefix)
except:
logging.exception("Error in onRegisterFailed")
_nonceTemplate = Blob(bytearray(4), False)
class Node(object):
"""
Create a new Node for communication with an NDN hub with the given Transport
object and connectionInfo.
:param Transport transport: An object of a subclass of Transport used for
communication.
:param Transport.ConnectionInfo connectionInfo: An object of a subclass of
Transport.ConnectionInfo to be used to connect to the transport.
"""
def __init__(self, transport, connectionInfo):
self._transport = transport
self._connectionInfo = connectionInfo
# An array of _PendingInterest
self._pendingInterestTable = []
# An array of _RegisteredPrefix
self._registeredPrefixTable = []
# An array of _InterestFilterEntry
self._interestFilterTable = []
# An array of _DelayedCall
self._delayedCallTable = []
# An array of function objects
self._onConnectedCallbacks = []
self._ndndIdFetcherInterest = Interest(
Name("/%C1.M.S.localhost/%C1.M.SRV/ndnd/KEY"))
self._ndndIdFetcherInterest.setInterestLifetimeMilliseconds(4000.0)
self._ndndId = None
self._commandInterestGenerator = CommandInterestGenerator()
self._timeoutPrefix = Name("/local/timeout")
self._lastEntryId = 0
self._lastEntryIdLock = threading.Lock()
self._connectStatus = Node._ConnectStatus.UNCONNECTED
def expressInterest(
self, pendingInterestId, interestCopy, onData, onTimeout, wireFormat, face):
"""
Send the Interest through the transport, read the entire response and
call onData(interest, data).
:param int pendingInterestId: The getNextEntryId() for the pending
interest ID which Face got so it could return it to the caller.
:param Interest interestCopy: The Interest which is NOT copied for this
internal Node method. The Face expressInterest is responsible for
making a copy for Node to use.
:param onData: A function object to call when a matching data packet is
received.
:type onData: function object
:param onTimeout: A function object to call if the interest times out.
If onTimeout is None, this does not use it.
:type onTimeout: function object
:param wireFormat: A WireFormat object used to encode the message.
:type wireFormat: a subclass of WireFormat
:param Face face: The face which has the callLater method, used for
interest timeouts. The callLater method may be overridden in a
subclass of Face.
:throws: RuntimeError If the encoded interest size exceeds
getMaxNdnPacketSize().
"""
# TODO: Properly check if we are already connected to the expected host.
if self._connectStatus == self._ConnectStatus.CONNECT_COMPLETE:
# We are connected. Simply send the interest.
self._expressInterestHelper(
pendingInterestId, interestCopy, onData, onTimeout, wireFormat,
face)
return
if self._connectStatus == Node._ConnectStatus.UNCONNECTED:
self._connectStatus = Node._ConnectStatus.CONNECT_REQUESTED
# expressInterestHelper will be called by onConnected.
self._onConnectedCallbacks.append(
lambda: self._expressInterestHelper
(pendingInterestId, interestCopy, onData, onTimeout, wireFormat,
face))
def onConnected():
# Assume that further calls to expressInterest dispatched to the
# event loop are queued and won't enter expressInterest until
# this method completes and sets CONNECT_COMPLETE.
# Call each callback added while the connection was opening.
for onConnectedCallback in self._onConnectedCallbacks:
onConnectedCallback()
self._onConnectedCallbacks = []
# Make future calls to expressInterest send directly to the
# Transport.
self._connectStatus = Node._ConnectStatus.CONNECT_COMPLETE
self._transport.connect(self._connectionInfo, self, onConnected)
elif self._connectStatus == self._ConnectStatus.CONNECT_REQUESTED:
# Still connecting. add to the interests to express by onConnected.
self._onConnectedCallbacks.append(
lambda: self._expressInterestHelper
(pendingInterestId, interestCopy, onData, onTimeout, wireFormat,
face))
else:
# Don't expect this to happen.
raise RuntimeError(
"Node: Unrecognized _connectStatus " + str(self._connectStatus))
def removePendingInterest(self, pendingInterestId):
"""
Remove the pending interest entry with the pendingInterestId from the
pending interest table. This does not affect another pending interest
with a different pendingInterestId, even if it has the same interest
name. If there is no entry with the pendingInterestId, do nothing.
:param int pendingInterestId: The ID returned from expressInterest.
"""
count = 0
# Go backwards through the list so we can erase entries.
# Remove all entries even though pendingInterestId should be unique.
i = len(self._pendingInterestTable) - 1
while i >= 0:
if (self._pendingInterestTable[i].getPendingInterestId() ==
pendingInterestId):
count += 1
# For efficiency, mark this as removed so that
# _processInterestTimeout doesn't look for it.
self._pendingInterestTable[i].setIsRemoved()
self._pendingInterestTable.pop(i)
i -= 1
if count == 0:
logging.getLogger(__name__).debug(
"removePendingInterest: Didn't find pendingInterestId " + pendingInterestId)
def makeCommandInterest(self, interest, keyChain, certificateName, wireFormat):
"""
Append a timestamp component and a random value component to interest's
name. Then use the keyChain and certificateName to sign the interest.
If the interest lifetime is not set, this sets it.
:param Interest interest: The interest whose name is append with
components.
:param KeyChain keyChain: The KeyChain for calling sign.
:param Name certificateName: The certificate name of the key to use for
signing.
:param wireFormat: A WireFormat object used to encode the
SignatureInfo and to encode the interest name for signing.
:type wireFormat: A subclass of WireFormat
"""
self._commandInterestGenerator.generate(
interest, keyChain, certificateName, wireFormat)
def registerPrefix(
self, registeredPrefixId, prefixCopy, onInterest, onRegisterFailed, flags,
wireFormat, commandKeyChain, commandCertificateName, face):
"""
Register prefix with the connected NDN hub and call onInterest when a
matching interest is received.
:param int registeredPrefixId: The getNextEntryId() for the registered
prefix ID which Face got so it could return it to the caller.
:param Name prefixCopy: The Name for the prefix to register which is NOT
copied for this internal Node method. The Face registerPrefix is
responsible for making a copy for Node to use.
:param onInterest: (optional) If not None, this creates an interest
filter from prefixCopy so that when an Interest is received which matches
the filter, this calls
onInterest(prefix, interest, face, interestFilterId, filter).
NOTE: You must not change the prefix or filter objects - if you need to
change them then make a copy. If onInterest is None, it is ignored and
you must call setInterestFilter.
:type onInterest: function object
:param onRegisterFailed: A function object to call if failed to retrieve
the connected hub's ID or failed to register the prefix.
:type onRegisterFailed: function object
:param ForwardingFlags flags: The flags for finer control of which
interests are forwardedto the application.
:param wireFormat: A WireFormat object used to encode the message.
:type wireFormat: a subclass of WireFormat
:param KeyChain commandKeyChain: The KeyChain object for signing
interests. If null, assume we are connected to a legacy NDNx forwarder.
:param Name commandCertificateName: The certificate name for signing
interests.
:param Face face: The face which is passed to the onInterest callback.
If onInterest is None, this is ignored.
"""
# If we have an _ndndId, we know we already connected to NDNx.
if self._ndndId != None or commandKeyChain == None:
# Assume we are connected to a legacy NDNx server.
if not WireFormat.ENABLE_NDNX:
raise RuntimeError(
"registerPrefix with NDNx is deprecated. To enable while you upgrade your code to use NFD, set WireFormat.ENABLE_NDNX = True")
if self._ndndId == None:
# First fetch the ndndId of the connected hub.
fetcher = Node._NdndIdFetcher(
self, registeredPrefixId, prefixCopy, onInterest, onRegisterFailed,
flags, wireFormat, face)
# We send the interest using the given wire format so that the hub
# receives (and sends) in the application's desired wire format.
self.expressInterest(
self.getNextEntryId(), self._ndndIdFetcherInterest,
fetcher.onData, fetcher.onTimeout, wireFormat, face)
else:
self._registerPrefixHelper(
registeredPrefixId, prefixCopy, onInterest, onRegisterFailed,
flags, wireFormat, face)
else:
# The application set the KeyChain for signing NFD interests.
self._nfdRegisterPrefix(
registeredPrefixId, prefixCopy, onInterest,
onRegisterFailed, flags, commandKeyChain, commandCertificateName,
face)
def removeRegisteredPrefix(self, registeredPrefixId):
"""
Remove the registered prefix entry with the registeredPrefixId from the
registered prefix table. This does not affect another registered prefix
with a different registeredPrefixId, even if it has the same prefix
name. If an interest filter was automatically created by registerPrefix,
also remove it. If there is no entry with the registeredPrefixId, do
nothing.
:param int registeredPrefixId: The ID returned from registerPrefix.
"""
count = 0
# Go backwards through the list so we can erase entries.
# Remove all entries even though registeredPrefixId should be unique.
i = len(self._registeredPrefixTable) - 1
while i >= 0:
entry = self._registeredPrefixTable[i]
if (entry.getRegisteredPrefixId() == registeredPrefixId):
count += 1
if entry.getRelatedInterestFilterId() > 0:
# Remove the related interest filter.
self.unsetInterestFilter(entry.getRelatedInterestFilterId())
self._registeredPrefixTable.pop(i)
i -= 1
if count == 0:
logging.getLogger(__name__).debug(
"removeRegisteredPrefix: Didn't find registeredPrefixId " + registeredPrefixId)
def setInterestFilter(self, interestFilterId, filterCopy, onInterest, face):
"""
Add an entry to the local interest filter table to call the onInterest
callback for a matching incoming Interest. This method only modifies the
library's local callback table and does not register the prefix with the
forwarder. It will always succeed. To register a prefix with the
forwarder, use registerPrefix.
:param int interestFilterId: The getNextEntryId() for the interest
filter ID which Face got so it could return it to the caller.
:param InterestFilter filterCopy: The InterestFilter with a prefix and
optional regex filter used to match the name of an incoming Interest,
which is NOT copied for this internal Node method. The Face
setInterestFilter is responsible for making a copy for Node to use.
:param onInterest: When an Interest is received which matches the filter,
this calls onInterest(prefix, interest, face, interestFilterId, filter).
:type onInterest: function object
:param Face face: The face which is passed to the onInterest callback.
"""
self._interestFilterTable.append(Node._InterestFilterEntry
(interestFilterId, filterCopy, onInterest, face))
def unsetInterestFilter(self, interestFilterId):
"""
Remove the interest filter entry which has the interestFilterId from the
interest filter table. This does not affect another interest filter with
a different interestFilterId, even if it has the same prefix name. If
there is no entry with the interestFilterId, do nothing.
:param int interestFilterId: The ID returned from setInterestFilter.
"""
count = 0
# Go backwards through the list so we can erase entries.
# Remove all entries even though interestFilterId should be unique.
i = len(self._interestFilterTable) - 1
while i >= 0:
if (self._interestFilterTable[i].getInterestFilterId() ==
interestFilterId):
count += 1
self._interestFilterTable.pop(i)
i -= 1
if count == 0:
logging.getLogger(__name__).debug(
"unsetInterestFilter: Didn't find interestFilterId " + interestFilterId)
def send(self, encoding):
"""
Send the encoded packet out through the transport.
:param encoding: The array of bytes for the encoded packet to send.
:type encoding: An array type with int elements
:throws: RuntimeError If the packet size exceeds getMaxNdnPacketSize().
"""
if len(encoding) > self.getMaxNdnPacketSize():
raise RuntimeError(
"The encoded packet size exceeds the maximum limit getMaxNdnPacketSize()")
self._transport.send(encoding)
def processEvents(self):
"""
Process any packets to receive and call callbacks such as onData,
onInterest or onTimeout. This returns immediately if there is no data to
receive. This blocks while calling the callbacks. You should repeatedly
call this from an event loop, with calls to sleep as needed so that the
loop doesn't use 100% of the CPU. Since processEvents modifies the pending
interest table, your application should make sure that it calls
processEvents in the same thread as expressInterest (which also modifies
the pending interest table).
:raises: This may raise an exception for reading data or in the callback
for processing the data. If you call this from an main event loop,
you may want to catch and log/disregard all exceptions.
"""
self._transport.processEvents()
# Check for delayed calls. Since callLater does a sorted insert into
# _delayedCallTable, the check for timeouts is quick and does not
# require searching the entire table. If callLater is overridden to use
# a different mechanism, then processEvents is not needed to check for
# delayed calls.
now = Common.getNowMilliseconds()
# _delayedCallTable is sorted on _callTime, so we only need to process
# the timed-out entries at the front, then quit.
while (len(self._delayedCallTable) > 0 and
self._delayedCallTable[0].getCallTime() <= now):
delayedCall = self._delayedCallTable[0]
del self._delayedCallTable[0]
delayedCall.callCallback()
def getTransport(self):
"""
Get the transport object given to the constructor.
:return: The transport object.
:rtype: Transport
"""
return self._transport
def getConnectionInfo(self):
"""
Get the connectionInfo object given to the constructor.
:return: The connectionInfo object.
:rtype: Transport.ConnectionInfo
"""
return self._connectionInfo
def onReceivedElement(self, element):
"""
This is called by the transport's ElementReader to process an
entire received Data or Interest element.
:param element: The bytes of the incoming element.
:type element: An array type with int elements
"""
# The type codes for TLV Interest and Data packets are chosen to not
# conflict with the first byte of a binary XML packet, so we canjust
# look at the first byte.
if not (element[0] == Tlv.Interest or element[0] == Tlv.Data):
# Ignore non-TLV elements.
# Assume it is Binary XML.
if not WireFormat.ENABLE_NDNX:
raise RuntimeError(
"BinaryXmlWireFormat (NDNx) is deprecated. To enable while you upgrade your network to use NDN-TLV, set WireFormat.ENABLE_NDNX = True")
return
# First, decode as Interest or Data.
interest = None
data = None
decoder = TlvDecoder(element)
if decoder.peekType(Tlv.Interest, len(element)):
interest = Interest()
interest.wireDecode(element, TlvWireFormat.get())
elif decoder.peekType(Tlv.Data, len(element)):
data = Data()
data.wireDecode(element, TlvWireFormat.get())
# Now process as Interest or Data.
if interest != None:
# Call all interest filter callbacks which match.
for i in range(len(self._interestFilterTable)):
entry = self._interestFilterTable[i]
if entry.getFilter().doesMatch(interest.getName()):
includeFilter = True
# Use getcallargs to test if onInterest accepts 5 args.
try:
inspect.getcallargs(entry.getOnInterest(),
None, None, None, None, None)
except TypeError:
# Assume onInterest is old-style with 4 arguments.
includeFilter = False
if includeFilter:
entry.getOnInterest()(
entry.getFilter().getPrefix(), interest,
entry.getFace(), entry.getInterestFilterId(),
entry.getFilter())
else:
# Old-style onInterest without the filter argument. We
# still pass a Face instead of Transport since Face also
# has a send method.
entry.getOnInterest()(
entry.getFilter().getPrefix(), interest,
entry.getFace(), entry.getInterestFilterId())
elif data != None:
pendingInterests = self._extractEntriesForExpressedInterest(
data.getName())
for pendingInterest in pendingInterests:
pendingInterest.getOnData()(pendingInterest.getInterest(), data)
def isLocal(self):
"""
Check if the face is local based on the current connection through the
Transport; some Transport may cause network I/O (e.g. an IP host name
lookup).
:return: True if the face is local, False if not.
:rtype bool:
"""
return self._transport.isLocal(self._connectionInfo)
def shutdown(self):
"""
Call getTransport().close().
"""
self._transport.close()
@staticmethod
def getMaxNdnPacketSize():
"""
Get the practical limit of the size of a network-layer packet. If a packet
is larger than this, the library or application MAY drop it.
:return: The maximum NDN packet size.
:rtype: int
"""
return Common.MAX_NDN_PACKET_SIZE
def _expressInterestHelper(
self, pendingInterestId, interestCopy, onData, onTimeout, wireFormat, face):
"""
Do the work of expressInterest once we know we are connected. Add the
entry to the PIT, encode and send the interest.
:param int pendingInterestId: The getNextEntryId() for the pending
interest ID which Face got so it could return it to the caller.
:param Interest interestCopy: The Interest to send, which has already
been copied.
:param onData: A function object to call when a matching data packet is
received.
:type onData: function object
:param onTimeout: A function object to call if the interest times out.
If onTimeout is None, this does not use it.
:type onTimeout: function object
:param wireFormat: A WireFormat object used to encode the message.
:type wireFormat: a subclass of WireFormat
:param Face face: The face which has the callLater method, used for
interest timeouts. The callLater method may be overridden in a
subclass of Face.
:throws: RuntimeError If the encoded interest size exceeds
getMaxNdnPacketSize().
"""
pendingInterest = Node._PendingInterest(
pendingInterestId, interestCopy, onData, onTimeout)
self._pendingInterestTable.append(pendingInterest)
if (interestCopy.getInterestLifetimeMilliseconds() != None and
interestCopy.getInterestLifetimeMilliseconds() >= 0.0):
# Set up the timeout.
face.callLater(interestCopy.getInterestLifetimeMilliseconds(),
lambda: self._processInterestTimeout(pendingInterest))
# Special case: For _timeoutPrefix we don't actually send the interest.
if not self._timeoutPrefix.match(interestCopy.getName()):
encoding = interestCopy.wireEncode(wireFormat)
if encoding.size() > self.getMaxNdnPacketSize():
raise RuntimeError(
"The encoded interest size exceeds the maximum limit getMaxNdnPacketSize()")
self._transport.send(encoding.toBuffer())
def _extractEntriesForExpressedInterest(self, name):
"""
Find all entries from the _pendingInterestTable where the name conforms
to the entry's interest selectors, remove the entries from the table
and return them.
:param Name name: The name to find the interest for (from the incoming
data packet).
:return: The matching entries from the _pendingInterestTable, or []
if none are found.
:rtype: array of _PendingInterest
"""
result = []
# Go backwards through the list so we can erase entries.
i = len(self._pendingInterestTable) - 1
while i >= 0:
pendingInterest = self._pendingInterestTable[i]
if pendingInterest.getInterest().matchesName(name):
result.append(pendingInterest)
# We let the callback from callLater call _processInterestTimeout,
# but for efficiency, mark this as removed so that it returns
# right away.
self._pendingInterestTable.pop(i)
pendingInterest.setIsRemoved()
i -= 1
return result
def _registerPrefixHelper(
self, registeredPrefixId, prefix, onInterest, onRegisterFailed, flags,
wireFormat, face):
"""
Do the work of registerPrefix to register with NDNx once we have an
_ndndId.
:param int registeredPrefixId: The getNextEntryId() which registerPrefix
got so it could return it to the caller. If this is 0, then don't add
to _registeredPrefixTable (assuming it has already been done).
"""
if not WireFormat.ENABLE_NDNX:
# We can get here if the command signing info is set, but running NDNx.
raise RuntimeError(
"registerPrefix with NDNx is deprecated. To enable while you upgrade your code to use NFD, set WireFormat.ENABLE_NDNX = True")
# Create a ForwardingEntry.
# Note: ndnd ignores any freshness that is larger than 3600 seconds and
# sets 300 seconds instead. To register "forever", (=2000000000 sec),
# the freshness period must be omitted.
forwardingEntry = ForwardingEntry()
forwardingEntry.setAction("selfreg")
forwardingEntry.setPrefix(prefix)
forwardingEntry.setForwardingFlags(flags)
content = forwardingEntry.wireEncode(wireFormat)
# Set the ForwardingEntry as the content of a Data packet and sign.
data = Data()
data.setContent(content)
# Set the name to a random value so that each request is unique.
nonce = bytearray(4)
for i in range(len(nonce)):
nonce[i] = _systemRandom.randint(0, 0xff)
data.getName().append(nonce)
# The ndnd ignores the signature, so set to blank values.
data.getSignature().getKeyLocator().setType(
KeyLocatorType.KEY_LOCATOR_DIGEST)
data.getSignature().getKeyLocator().setKeyData(
Blob(bytearray(32), False))
data.getSignature().setSignature(Blob(bytearray(128), False))
encodedData = data.wireEncode(wireFormat)
# Create an interest where the name has the encoded Data packet.
interestName = Name().append("ndnx").append(self._ndndId).append(
"selfreg").append(encodedData)
interest = Interest(interestName)
interest.setInterestLifetimeMilliseconds(4000.0)
interest.setScope(1)
if registeredPrefixId != 0:
interestFilterId = 0
if onInterest != None:
# registerPrefix was called with the "combined" form that includes
# the callback, so add an InterestFilterEntry.
interestFilterId = self.getNextEntryId()
self.setInterestFilter(
interestFilterId, InterestFilter(prefix), onInterest, face)
self._registeredPrefixTable.append(Node._RegisteredPrefix(
registeredPrefixId, prefix, interestFilterId))
# Send the registration interest.
response = Node._RegisterResponse(
self, prefix, onInterest, onRegisterFailed, flags, wireFormat, False,
face)
self.expressInterest(
self.getNextEntryId(), interest, response.onData, response.onTimeout,
wireFormat, face)
def _nfdRegisterPrefix(
self, registeredPrefixId, prefix, onInterest, onRegisterFailed, flags,
commandKeyChain, commandCertificateName, face):
"""
Do the work of registerPrefix to register with NFD.
:param int registeredPrefixId: The getNextEntryId() which registerPrefix
got so it could return it to the caller. If this is 0, then don't add
to _registeredPrefixTable (assuming it has already been done).
"""
if commandKeyChain == None:
raise RuntimeError(
"registerPrefix: The command KeyChain has not been set. You must call setCommandSigningInfo.")
if commandCertificateName.size() == 0:
raise RuntimeError(
"registerPrefix: The command certificate name has not been set. You must call setCommandSigningInfo.")
controlParameters = ControlParameters()
controlParameters.setName(prefix)
controlParameters.setForwardingFlags(flags)
commandInterest = Interest()
if self.isLocal():
commandInterest.setName(Name("/localhost/nfd/rib/register"))
# The interest is answered by the local host, so set a short timeout.
commandInterest.setInterestLifetimeMilliseconds(2000.0)
else:
commandInterest.setName(Name("/localhop/nfd/rib/register"))
# The host is remote, so set a longer timeout.
commandInterest.setInterestLifetimeMilliseconds(4000.0)
# NFD only accepts TlvWireFormat packets.
commandInterest.getName().append(controlParameters.wireEncode(TlvWireFormat.get()))
self.makeCommandInterest(
commandInterest, commandKeyChain, commandCertificateName,
TlvWireFormat.get())
if registeredPrefixId != 0:
interestFilterId = 0
if onInterest != None:
# registerPrefix was called with the "combined" form that includes
# the callback, so add an InterestFilterEntry.
interestFilterId = self.getNextEntryId()
self.setInterestFilter(
interestFilterId, InterestFilter(prefix), onInterest, face)
self._registeredPrefixTable.append(Node._RegisteredPrefix(
registeredPrefixId, prefix, interestFilterId))
# Send the registration interest.
response = Node._RegisterResponse(
self, prefix, onInterest, onRegisterFailed, flags,
TlvWireFormat.get(), True, face)
self.expressInterest(
self.getNextEntryId(), commandInterest, response.onData,
response.onTimeout, TlvWireFormat.get(), face)
def callLater(self, delayMilliseconds, callback):
"""
Call callback() after the given delay. This adds to
self._delayedCallTable which is used by processEvents().
:param float delayMilliseconds: The delay in milliseconds.
:param callback: This calls callback() after the delay.
:type callback: function object
"""
delayedCall = Node._DelayedCall(delayMilliseconds, callback)
# Insert into _delayedCallTable, sorted on delayedCall.getCallTime().
# Search from the back since we expect it to go there.
i = len(self._delayedCallTable) - 1
while i >= 0:
if (self._delayedCallTable[i].getCallTime() <= delayedCall.getCallTime()):
break
i -= 1
# Element i is the greatest less than or equal to
# delayedCall.getCallTime(), so insert after it.
self._delayedCallTable.insert(i + 1, delayedCall)
def _processInterestTimeout(self, pendingInterest):
"""
This is used in callLater for when the pending interest expires. If
the pendingInterest is still in the _pendingInterestTable, remove it and
call its onTimeout callback.
"""
if pendingInterest.getIsRemoved():
# _extractEntriesForExpressedInterest or removePendingInterest has
# removed pendingInterest from _pendingInterestTable, so we don't
# need to look for it. Do nothing.
return
try:
index = self._pendingInterestTable.index(pendingInterest)
except ValueError:
# The pending interest has been removed. Do nothing.
return
del self._pendingInterestTable[index]
pendingInterest.callTimeout()
def getNextEntryId(self):
"""
Get the next unique entry ID for the pending interest table, interest
filter table, etc. This uses a threading.Lock() to be thread safe. Most
entry IDs are for the pending interest table (there usually are not many
interest filter table entries) so we use a common pool to only have to
do the thread safe lock in one method which is called by Face.
:return: The next entry ID.
:rtype: int
"""
with self._lastEntryIdLock:
self._lastEntryId += 1
return self._lastEntryId
class _ConnectStatus(object):
UNCONNECTED = 1
CONNECT_REQUESTED = 2
CONNECT_COMPLETE = 3
class _DelayedCall(object):
"""
_DelayedCall is a private class for the members of the _delayedCallTable.
Create a new _DelayedCall and set the call time based on the current
time and the delayMilliseconds.
:param float delayMilliseconds: The delay in milliseconds.
:param callback: This calls callback() after the delay.
:type callback: function object
"""
def __init__(self, delayMilliseconds, callback):
self._callback = callback
self._callTime = Common.getNowMilliseconds() + delayMilliseconds
def getCallTime(self):
"""
Get the time at which the callback should be called.
:return: The call time in milliseconds, similar to
Common.getNowMilliseconds().
:rtype: float
"""
return self._callTime
def callCallback(self):
"""
Call the callback given to the constructor. This does not catch
exceptions.
"""
self._callback()
class _PendingInterest(object):
"""
_PendingInterest is a private class for the members of the
_pendingInterestTable.
:param int pendingInterestId: A unique ID for this entry, which you
should get with getNextEntryId().
:param Interest interest: The interest.
:param onData: A function object to call when a matching data packet is
received.
:type onData: function object
:param onTimeout: A function object to call if the interest times out.
If onTimeout is None, this does not use it.
:type onTimeout: function object
"""
def __init__(self, pendingInterestId, interest, onData, onTimeout):
self._pendingInterestId = pendingInterestId
self._interest = interest
self._onData = onData
self._onTimeout = onTimeout
self._isRemoved = False
def getPendingInterestId(self):
"""
Get the pendingInterestId given to the constructor.
:return: The pending interest ID.
:rtype: int
"""
return self._pendingInterestId
def getInterest(self):
"""
Get the interest given to the constructor.
:return: The interest.
:rtype: int
"""
return self._interest
def getOnData(self):
"""
Get the onData function object given to the constructor.
:return: The onData function object.
:rtype: function object
"""
return self._onData
def callTimeout(self):
"""
Call _onTimeout (if defined). This ignores exceptions from
_onTimeout.
"""
if self._onTimeout:
# Ignore all exceptions.
try:
self._onTimeout(self._interest)
except:
pass
def setIsRemoved(self):
"""
Set the isRemoved flag which is returned by getIsRemoved().
"""
self._isRemoved = True
def getIsRemoved(self):
"""
Check if setIsRemoved() was called.
:return: True if setIsRemoved() was called.
:rtype: bool
"""
return self._isRemoved
class _RegisteredPrefix(object):
"""
A _RegisteredPrefix holds a registeredPrefixId and information necessary
to remove the registration later. It optionally holds a related
interestFilterId if the InterestFilter was set in the same
registerPrefix operation.
:param int registeredPrefixId: A unique ID for this entry, which you
should get with getNextEntryId().
:param Name prefix: The name prefix.
:param int relatedInterestFilterId: (optional) The related
interestFilterId for the filter set in the same registerPrefix
operation. If omitted, set to 0.
"""
def __init__(self, registeredPrefixId, prefix, relatedInterestFilterId):
self._registeredPrefixId = registeredPrefixId
self._prefix = prefix
self._relatedInterestFilterId = relatedInterestFilterId
def getRegisteredPrefixId(self):
"""
Get the registeredPrefixId given to the constructor.
:return: The registered prefix ID.
:rtype: int
"""
return self._registeredPrefixId
def getPrefix(self):
"""
Get the name prefix to the constructor.
:return: The name prefix.
:rtype: Name
"""
return self._prefix
def getRelatedInterestFilterId(self):
"""
Get the related interestFilterId given to the constructor.
:return: The related interestFilterId.
:rtype: int
"""
return self._relatedInterestFilterId
class _InterestFilterEntry(object):
"""
An _InterestFilterEntry holds an interestFilterId, an InterestFilter
and the OnInterestCallback with its related Face.
Create a new InterestFilterEntry with the given values.
:param int interestFilterId: The ID from getNextEntryId().
:param InterestFilter filter: The InterestFilter for this entry.
:param onInterest: The callback to call.
:type onInterest: function object
:param Face face: The face on which was called registerPrefix or
setInterestFilter which is passed to the onInterest callback.
"""
def __init__(self, interestFilterId, filter, onInterest, face):
self._interestFilterId = interestFilterId
self._filter = filter
self._onInterest = onInterest
self._face = face
def getInterestFilterId(self):
"""
Get the interestFilterId given to the constructor.
:return: The interestFilterId.
:rtype: int
"""
return self._interestFilterId
def getFilter(self):
"""
Get the InterestFilter given to the constructor.
:return: The InterestFilter.
:rtype: InterestFilter
"""
return self._filter
def getOnInterest(self):
"""
Get the OnInterestCallback given to the constructor.
:return: The OnInterestCallback.
:rtype: function object
"""
return self._onInterest
def getFace(self):
"""
Get the Face given to the constructor.
:return: The Face.
:rtype: Face
"""
return self._face
class _NdndIdFetcher(object):
"""
An _NdndIdFetcher receives the Data packet with the publisher public key
digest for the connected NDN hub.
"""
def __init__(self, node, registeredPrefixId, prefix, onInterest,
onRegisterFailed, flags, wireFormat, face):
self._node = node
self._registeredPrefixId = registeredPrefixId
self._prefix = prefix
self._onInterest = onInterest
self._onRegisterFailed = onRegisterFailed
self._flags = flags
self._wireFormat = wireFormat
self._face = face
def onData(self, interest, ndndIdData):
"""
We received the ndnd ID.
"""
# Assume that the content is a DER encoded public key of the ndnd.
# Do a quick check that the first byte is for DER encoding.
if (ndndIdData.getContent().size() < 1 or
ndndIdData.getContent().buf()[0] != 0x30):
logging.getLogger(__name__).info(
"Register prefix failed: The content returned when fetching the NDNx ID does not appear to be a public key")
self._onRegisterFailed(self._prefix)
return
# Get the digest of the public key.
digest = bytearray(
hashlib.sha256(ndndIdData.getContent().toBuffer()).digest())
# Set the _ndndId and continue.
# TODO: If there are multiple connected hubs, the NDN ID is really
# stored per connected hub.
self._node._ndndId = Blob(digest, False)
self._node._registerPrefixHelper(
self._registeredPrefixId, self._prefix, self._onInterest,
self._onRegisterFailed, self._flags, self._wireFormat, self._face)
def onTimeout(self, interest):
"""
We timed out fetching the ndnd ID.
"""
logging.getLogger(__name__).info(
"Register prefix failed: Timeout fetching the NDNx ID")
self._onRegisterFailed(self._prefix)
class _RegisterResponse(object):
"""
A _RegisterResponse receives the response Data packet from the register
prefix interest sent to the connected NDN hub. If this gets a bad
response or a timeout, call onRegisterFailed.
"""
def __init__(self, node, prefix, onInterest, onRegisterFailed, flags,
wireFormat, isNfdCommand, face):
self._node = node
self._prefix = prefix
self._onInterest = onInterest
self._onRegisterFailed = onRegisterFailed
self._flags = flags
self._wireFormat = wireFormat
self._isNfdCommand = isNfdCommand
self._face = face
def onData(self, interest, responseData):
"""
We received the response. Do a quick check of expected name
components.
"""
if self._isNfdCommand:
# Decode responseData->getContent() and check for a success code.
# TODO: Move this into the TLV code.
statusCode = None
try:
decoder = TlvDecoder(responseData.getContent().buf())
decoder.readNestedTlvsStart(Tlv.NfdCommand_ControlResponse)
statusCode = decoder.readNonNegativeIntegerTlv(Tlv.NfdCommand_StatusCode)
except ValueError as ex:
logging.getLogger(__name__).info(
"Register prefix failed: Error decoding the NFD response: %s",
str(ex))
self._onRegisterFailed(self._prefix)
return
# Status code 200 is "OK".
if statusCode != 200:
logging.getLogger(__name__).info(
"Register prefix failed: Expected NFD status code 200, got: %d",
statusCode)
self._onRegisterFailed(self._prefix)
return
logging.getLogger(__name__).info(
"Register prefix succeeded with the NFD forwarder for prefix %s",
self._prefix.toUri())
else:
expectedName = Name("/ndnx/.../selfreg")
if (responseData.getName().size() < 4 or
responseData.getName()[0] != expectedName[0] or
responseData.getName()[2] != expectedName[2]):
logging.getLogger(__name__).info(
"Register prefix failed: Unexpected name in NDNx response: %s",
responseData.getName().toUri())
self._onRegisterFailed(self._prefix)
return
logging.getLogger(__name__).info(
"Register prefix succeeded with the NDNx forwarder for prefix %s",
self._prefix.toUri())
def onTimeout(self, interest):
"""
We timed out waiting for the response.
"""
if self._isNfdCommand:
logging.getLogger(__name__).info(
"Timeout for NFD register prefix command. Attempting an NDNx command...")
# The application set the commandKeyChain, but we may be
# connected to NDNx.
if self._node._ndndId == None:
# First fetch the ndndId of the connected hub.
# Pass 0 for registeredPrefixId since the entry was already added to
# _registeredPrefixTable on the first try.
fetcher = Node._NdndIdFetcher(
self._node, 0, self._prefix, self._onInterest,
self._onRegisterFailed, self._flags, self._wireFormat,
self._face)
# We send the interest using the given wire format so that the hub
# receives (and sends) in the application's desired wire format.
self._node.expressInterest(
self._node.getNextEntryId(), self._node._ndndIdFetcherInterest,
fetcher.onData, fetcher.onTimeout, self._wireFormat,
self._face)
else:
# Pass 0 for registeredPrefixId since the entry was already
# added to _registeredPrefixTable on the first try.
self._node._registerPrefixHelper(
0, self._prefix, self._onInterest, self._onRegisterFailed,
self._flags, self._wireFormat)
else:
# An NDNx command was sent because there is no commandKeyChain,
# so we can't try an NFD command. Or it was sent from this
# callback after trying an NFD command. Fail.
logging.getLogger(__name__).info(
"Register prefix failed: Timeout waiting for the response from the register prefix interest")
self._onRegisterFailed(self._prefix)
class Consumer(object):
"""
Create a Consumer to use the given ConsumerDb, Face and other values.
:param Face face: The face used for data packet and key fetching.
:param KeyChain keyChain: The keyChain used to verify data packets.
:param Name groupName: The reading group name that the consumer belongs to.
This makes a copy of the Name.
:param Name consumerName: The identity of the consumer. This makes a copy of
the Name.
:param ConsumerDb database: The ConsumerDb database for storing decryption
keys.
:param Link cKeyLink: (optional) The Link object to use in Interests for
C-KEY retrieval. This makes a copy of the Link object. If the Link
object's getDelegations().size() is zero, don't use it. If omitted, don't
use a Link object.
:param Link dKeyLink: (optional) The Link object to use in Interests for
D-KEY retrieval. This makes a copy of the Link object. If the Link
object's getDelegations().size() is zero, don't use it. If omitted, don't
use a Link object.
"""
def __init__(self,
face,
keyChain,
groupName,
consumerName,
database,
cKeyLink=None,
dKeyLink=None):
self._database = database
self._keyChain = keyChain
self._face = face
self._groupName = Name(groupName)
self._consumerName = Name(consumerName)
self._cKeyLink = (Consumer.NO_LINK
if cKeyLink == None else Link(cKeyLink))
self._dKeyLink = (Consumer.NO_LINK
if dKeyLink == None else Link(dKeyLink))
# The dictionary key is the C-KEY name. The value is the encoded key Blob.
self._cKeyMap = {}
# The dictionary key is the D-KEY name. The value is the encoded key Blob.
self._dKeyMap = {}
def consume(self, contentName, onConsumeComplete, onError, link=None):
"""
Express an Interest to fetch the content packet with contentName, and
decrypt it, fetching keys as needed.
:param Name contentName: The name of the content packet.
:param onConsumeComplete: When the content packet is fetched and
decrypted, this calls onConsumeComplete(contentData, result) where
contentData is the fetched Data packet and result is the decrypted
plain text Blob.
NOTE: The library will log any exceptions raised by this callback, but
for better error handling the callback should catch and properly
handle any exceptions.
:type onPlainText: function object
:param onError: This calls onError(errorCode, message) for an error,
where errorCode is from EncryptError.ErrorCode and message is a str.
NOTE: The library will log any exceptions raised by this callback, but
for better error handling the callback should catch and properly
handle any exceptions.
:type onError: function object
:param Link link: (optional) The Link object to use in Interests for
data retrieval. This makes a copy of the Link object. If the Link
object's getDelegations().size() is zero, don't use it. If omitted,
don't use a Link object.
"""
if link == None:
link = Consumer.NO_LINK
interest = Interest(contentName)
def onVerified(validData):
# Decrypt the content.
def onPlainText(plainText):
try:
onConsumeComplete(validData, plainText)
except:
logging.exception("Error in onConsumeComplete")
self._decryptContent(validData, onPlainText, onError)
# Copy the Link object since the passed link may become invalid.
self._sendInterest(interest, 1, Link(link), onVerified, onError)
def setGroup(self, groupName):
"""
Set the group name.
:param Name groupName: The reading group name that the consumer belongs
to. This makes a copy of the Name.
"""
self._groupName = Name(groupName)
def addDecryptionKey(self, keyName, keyBlob):
"""
Add a new decryption key with keyName and keyBlob to the database.
:param Name keyName: The key name.
:param Blob keyBlob: The encoded key.
:raises ConsumerDb.Error: If a key with the same keyName already exists
in the database, or other database error.
:raises RuntimeError: if the consumer name is not a prefix of the key name.
"""
if not self._consumerName.match(keyName):
raise RuntimeError(
"addDecryptionKey: The consumer name must be a prefix of the key name"
)
self._database.addKey(keyName, keyBlob)
@staticmethod
def _decrypt(encryptedContent, keyBits, onPlainText, onError):
"""
Decrypt encryptedContent using keyBits.
:param encryptedContent: The EncryptedContent to decrypt, or a Blob
which is first decoded as an EncryptedContent.
:type encryptedContent: Blob or EncryptedContent
:param {Blob} keyBits The key value.
:param onPlainText: When encryptedBlob is decrypted, this calls
onPlainText(decryptedBlob) with the decrypted Blob.
:type onPlainText: function object
:param onError: This calls onError(errorCode, message) for an error,
where errorCode is from EncryptError.ErrorCode and message is a str.
:type onError: function object
"""
if isinstance(encryptedContent, Blob):
# Decode as EncryptedContent.
encryptedBlob = encryptedContent
encryptedContent = EncryptedContent()
encryptedContent.wireDecode(encryptedBlob)
payload = encryptedContent.getPayload()
if encryptedContent.getAlgorithmType() == EncryptAlgorithmType.AesCbc:
# Prepare the parameters.
decryptParams = EncryptParams(EncryptAlgorithmType.AesCbc)
decryptParams.setInitialVector(encryptedContent.getInitialVector())
# Decrypt the content.
try:
content = AesAlgorithm.decrypt(keyBits, payload, decryptParams)
except Exception as ex:
try:
onError(EncryptError.ErrorCode.InvalidEncryptedFormat,
repr(ex))
except:
logging.exception("Error in onError")
return
onPlainText(content)
elif encryptedContent.getAlgorithmType(
) == EncryptAlgorithmType.RsaOaep:
# Prepare the parameters.
decryptParams = EncryptParams(EncryptAlgorithmType.RsaOaep)
# Decrypt the content.
try:
content = RsaAlgorithm.decrypt(keyBits, payload, decryptParams)
except Exception as ex:
Consumer._callOnError(
onError, EncryptError.ErrorCode.InvalidEncryptedFormat,
repr(ex))
return
onPlainText(content)
else:
Consumer._callOnError(
onError, EncryptError.ErrorCode.UnsupportedEncryptionScheme,
repr(encryptedContent.getAlgorithmType()))
def _decryptContent(self, data, onPlainText, onError):
"""
Decrypt the data packet.
:param Data data: The data packet. This does not verify the packet.
:param onPlainText: When the data packet is decrypted, this calls
onPlainText(decryptedBlob) with the decrypted blob.
:type onPlainText: function object
:param onError: This calls onError(errorCode, message) for an error,
where errorCode is from EncryptError.ErrorCode and message is a str.
:type onError: function object
"""
# Get the encrypted content.
dataEncryptedContent = EncryptedContent()
try:
dataEncryptedContent.wireDecode(data.getContent())
except Exception as ex:
Consumer._callOnError(
onError, EncryptError.ErrorCode.InvalidEncryptedFormat,
repr(ex))
return
cKeyName = dataEncryptedContent.getKeyLocator().getKeyName()
# Check if the content key is already in the store.
if cKeyName in self._cKeyMap:
cKey = self._cKeyMap[cKeyName]
self._decrypt(dataEncryptedContent, cKey, onPlainText, onError)
else:
# Retrieve the C-KEY Data from the network.
interestName = Name(cKeyName)
interestName.append(Encryptor.NAME_COMPONENT_FOR).append(
self._groupName)
interest = Interest(interestName)
def onVerified(validCKeyData):
def localOnPlainText(cKeyBits):
# cKeyName is already a copy inside the local
# dataEncryptedContent.
self._cKeyMap[cKeyName] = cKeyBits
Consumer._decrypt(dataEncryptedContent, cKeyBits,
onPlainText, onError)
self._decryptCKey(validCKeyData, localOnPlainText, onError)
self._sendInterest(interest, 1, self._cKeyLink, onVerified,
onError)
def _decryptCKey(self, cKeyData, onPlainText, onError):
"""
Decrypt cKeyData.
:param Data cKeyData: The C-KEY data packet.
:param onPlainText: When the data packet is decrypted, this calls
onPlainText(decryptedBlob) with the decrypted blob.
:type onPlainText: function object
:param onError: This calls onError(errorCode, message) for an error,
where errorCode is from EncryptError.ErrorCode and message is a str.
:type onError: function object
"""
# Get the encrypted content.
cKeyContent = cKeyData.getContent()
cKeyEncryptedContent = EncryptedContent()
try:
cKeyEncryptedContent.wireDecode(cKeyContent)
except Exception as ex:
try:
onError(EncryptError.ErrorCode.InvalidEncryptedFormat,
repr(ex))
except:
logging.exception("Error in onError")
return
eKeyName = cKeyEncryptedContent.getKeyLocator().getKeyName()
dKeyName = eKeyName.getPrefix(-3)
dKeyName.append(Encryptor.NAME_COMPONENT_D_KEY).append(
eKeyName.getSubName(-2))
# Check if the decryption key is already in the store.
if dKeyName in self._dKeyMap:
dKey = self._dKeyMap[dKeyName]
Consumer._decrypt(cKeyEncryptedContent, dKey, onPlainText, onError)
else:
# Get the D-Key Data.
interestName = Name(dKeyName)
interestName.append(Encryptor.NAME_COMPONENT_FOR).append(
self._consumerName)
interest = Interest(interestName)
def onVerified(validDKeyData):
def localOnPlainText(dKeyBits):
# dKeyName is already a local copy.
self._dKeyMap[dKeyName] = dKeyBits
Consumer._decrypt(cKeyEncryptedContent, dKeyBits,
onPlainText, onError)
self._decryptDKey(validDKeyData, localOnPlainText, onError)
self._sendInterest(interest, 1, self._dKeyLink, onVerified,
onError)
def _decryptDKey(self, dKeyData, onPlainText, onError):
"""
Decrypt dKeyData.
:param Data dKeyData: The D-KEY data packet.
:param onPlainText: When the data packet is decrypted, this calls
onPlainText(decryptedBlob) with the decrypted blob.
:type onPlainText: function object
:param onError: This calls onError(errorCode, message) for an error,
where errorCode is from EncryptError.ErrorCode and message is a str.
:type onError: function object
"""
# Get encrypted content.
dataContent = dKeyData.getContent()
# Process the nonce.
# dataContent is a sequence of the two EncryptedContent.
encryptedNonce = EncryptedContent()
try:
encryptedNonce.wireDecode(dataContent)
except Exception as ex:
try:
onError(EncryptError.ErrorCode.InvalidEncryptedFormat,
repr(ex))
except:
logging.exception("Error in onError")
return
consumerKeyName = encryptedNonce.getKeyLocator().getKeyName()
# Get consumer decryption key.
try:
consumerKeyBlob = self._getDecryptionKey(consumerKeyName)
except Exception as ex:
Consumer._callOnError(onError, EncryptError.ErrorCode.NoDecryptKey,
"Database error: " + repr(ex))
return
if consumerKeyBlob.size() == 0:
try:
onError(
EncryptError.ErrorCode.NoDecryptKey,
"The desired consumer decryption key in not in the database"
)
except:
logging.exception("Error in onError")
return
# Process the D-KEY.
# Use the size of encryptedNonce to find the start of encryptedPayload.
encryptedPayloadBlob = Blob(
dataContent.buf()[encryptedNonce.wireEncode().size():], False)
if encryptedPayloadBlob.size() == 0:
try:
onError(
EncryptError.ErrorCode.InvalidEncryptedFormat,
"The data packet does not satisfy the D-KEY packet format")
except:
logging.exception("Error in onError")
return
# Decrypt the D-KEY.
Consumer._decrypt(
encryptedNonce,
consumerKeyBlob, lambda nonceKeyBits: Consumer._decrypt(
encryptedPayloadBlob, nonceKeyBits, onPlainText, onError),
onError)
def _sendInterest(self, interest, nRetrials, link, onVerified, onError):
"""
Express the interest, call verifyData for the fetched Data packet and
call onVerified if verify succeeds. If verify fails, call
onError(EncryptError.ErrorCode.Validation, "verifyData failed"). If the
interest times out, re-express nRetrials times. If the interest times
out nRetrials times, or for a network Nack, call
onError(EncryptError.ErrorCode.DataRetrievalFailure, interest.getName().toUri()).
:param Interest interest: The Interest to express.
:param int nRetrials: The number of retrials left after a timeout.
:param Link link: The Link object to use in the Interest. This does not
make a copy of the Link object. If the Link object's
getDelegations().size() is zero, don't use it.
:param onVerified: When the fetched Data packet validation succeeds,
this calls onVerified(data).
:type onVerified: function object
:param onError: This calls onError(errorCode, message) for an error,
where errorCode is from EncryptError.ErrorCode and message is a str.
:type onError: function object
"""
# Prepare the callback functions.
def onData(contentInterest, contentData):
# The Interest has no selectors, so assume the library correctly
# matched with the Data name before calling onData.
try:
self._keyChain.verifyData(
contentData, onVerified,
lambda d, reason: Consumer._callOnError(
onError, EncryptError.ErrorCode.Validation,
"verifyData failed. Reason: " + reason))
except Exception as ex:
try:
onError(EncryptError.ErrorCode.General,
"verifyData error: " + repr(ex))
except:
logging.exception("Error in onError")
def onNetworkNack(interest, networkNack):
# We have run out of options. Report a retrieval failure.
try:
onError(EncryptError.ErrorCode.DataRetrievalFailure,
interest.getName().toUri())
except:
logging.exception("Error in onError")
def onTimeout(interest):
if nRetrials > 0:
self._sendInterest(interest, nRetrials - 1, link, onVerified,
onError)
else:
onNetworkNack(interest, NetworkNack())
if link.getDelegations().size() == 0:
# We can use the supplied interest without copying.
request = interest
else:
# Copy the supplied interest and add the Link.
request = Interest(interest)
# This will use a cached encoding if available.
request.setLinkWireEncoding(link.wireEncode())
try:
self._face.expressInterest(request, onData, onTimeout,
onNetworkNack)
except Exception as ex:
try:
onError(EncryptError.ErrorCode.General,
"expressInterest error: " + repr(ex))
except:
logging.exception("Error in onError")
def _getDecryptionKey(self, decryptionKeyName):
"""
Get the encoded blob of the decryption key with decryptionKeyName from
the database.
:param Name decryptionKeyName: The key name.
:return: A Blob with the encoded key, or an isNull Blob if cannot find
the key with keyName.
:rtype: Blob
:raises ConsumerDb.Error: For a database error.
"""
return self._database.getKey(decryptionKeyName)
@staticmethod
def _callOnError(onError, errorCode, message):
"""
Call onError(errorCode, message) within a try block to log exceptions
that it throws. We name this separate helper function to use inside
lambda expressions.
"""
try:
onError(errorCode, message)
except:
logging.exception("Error in onError")
NO_LINK = Link()
class Consumer(object):
"""
Create a Consumer to use the given ConsumerDb, Face and other values.
:param Face face: The face used for data packet and key fetching.
:param KeyChain keyChain: The keyChain used to verify data packets.
:param Name groupName: The reading group name that the consumer belongs to.
This makes a copy of the Name.
:param Name consumerName: The identity of the consumer. This makes a copy of
the Name.
:param ConsumerDb database: The ConsumerDb database for storing decryption
keys.
:param Link cKeyLink: (optional) The Link object to use in Interests for
C-KEY retrieval. This makes a copy of the Link object. If the Link
object's getDelegations().size() is zero, don't use it. If omitted, don't
use a Link object.
:param Link dKeyLink: (optional) The Link object to use in Interests for
D-KEY retrieval. This makes a copy of the Link object. If the Link
object's getDelegations().size() is zero, don't use it. If omitted, don't
use a Link object.
"""
def __init__(self, face, keyChain, groupName, consumerName, database,
cKeyLink = None, dKeyLink = None):
self._database = database
self._keyChain = keyChain
self._face = face
self._groupName = Name(groupName)
self._consumerName = Name(consumerName)
self._cKeyLink = (Consumer.NO_LINK if cKeyLink == None
else Link(cKeyLink))
self._dKeyLink = (Consumer.NO_LINK if dKeyLink == None
else Link(dKeyLink))
# The dictionary key is the C-KEY name. The value is the encoded key Blob.
self._cKeyMap = {}
# The dictionary key is the D-KEY name. The value is the encoded key Blob.
self._dKeyMap = {}
def consume(self, contentName, onConsumeComplete, onError, link = None):
"""
Express an Interest to fetch the content packet with contentName, and
decrypt it, fetching keys as needed.
:param Name contentName: The name of the content packet.
:param onConsumeComplete: When the content packet is fetched and
decrypted, this calls onConsumeComplete(contentData, result) where
contentData is the fetched Data packet and result is the decrypted
plain text Blob.
NOTE: The library will log any exceptions raised by this callback, but
for better error handling the callback should catch and properly
handle any exceptions.
:type onPlainText: function object
:param onError: This calls onError(errorCode, message) for an error,
where errorCode is from EncryptError.ErrorCode and message is a str.
NOTE: The library will log any exceptions raised by this callback, but
for better error handling the callback should catch and properly
handle any exceptions.
:type onError: function object
:param Link link: (optional) The Link object to use in Interests for
data retrieval. This makes a copy of the Link object. If the Link
object's getDelegations().size() is zero, don't use it. If omitted,
don't use a Link object.
"""
if link == None:
link = Consumer.NO_LINK
interest = Interest(contentName)
def onVerified(validData):
# Decrypt the content.
def onPlainText(plainText):
try:
onConsumeComplete(validData, plainText)
except:
logging.exception("Error in onConsumeComplete")
self._decryptContent(validData, onPlainText, onError)
# Copy the Link object since the passed link may become invalid.
self._sendInterest(interest, 1, Link(link), onVerified, onError)
def setGroup(self, groupName):
"""
Set the group name.
:param Name groupName: The reading group name that the consumer belongs
to. This makes a copy of the Name.
"""
self._groupName = Name(groupName)
def addDecryptionKey(self, keyName, keyBlob):
"""
Add a new decryption key with keyName and keyBlob to the database.
:param Name keyName: The key name.
:param Blob keyBlob: The encoded key.
:raises ConsumerDb.Error: If a key with the same keyName already exists
in the database, or other database error.
:raises RuntimeError: if the consumer name is not a prefix of the key name.
"""
if not self._consumerName.match(keyName):
raise RuntimeError(
"addDecryptionKey: The consumer name must be a prefix of the key name")
self._database.addKey(keyName, keyBlob)
@staticmethod
def _decrypt(encryptedContent, keyBits, onPlainText, onError):
"""
Decrypt encryptedContent using keyBits.
:param encryptedContent: The EncryptedContent to decrypt, or a Blob
which is first decoded as an EncryptedContent.
:type encryptedContent: Blob or EncryptedContent
:param {Blob} keyBits The key value.
:param onPlainText: When encryptedBlob is decrypted, this calls
onPlainText(decryptedBlob) with the decrypted Blob.
:type onPlainText: function object
:param onError: This calls onError(errorCode, message) for an error,
where errorCode is from EncryptError.ErrorCode and message is a str.
:type onError: function object
"""
if isinstance(encryptedContent, Blob):
# Decode as EncryptedContent.
encryptedBlob = encryptedContent
encryptedContent = EncryptedContent()
encryptedContent.wireDecode(encryptedBlob)
payload = encryptedContent.getPayload()
if encryptedContent.getAlgorithmType() == EncryptAlgorithmType.AesCbc:
# Prepare the parameters.
decryptParams = EncryptParams(EncryptAlgorithmType.AesCbc)
decryptParams.setInitialVector(encryptedContent.getInitialVector())
# Decrypt the content.
try:
content = AesAlgorithm.decrypt(keyBits, payload, decryptParams)
except Exception as ex:
try:
onError(EncryptError.ErrorCode.InvalidEncryptedFormat, repr(ex))
except:
logging.exception("Error in onError")
return
onPlainText(content)
elif encryptedContent.getAlgorithmType() == EncryptAlgorithmType.RsaOaep:
# Prepare the parameters.
decryptParams = EncryptParams(EncryptAlgorithmType.RsaOaep)
# Decrypt the content.
try:
content = RsaAlgorithm.decrypt(keyBits, payload, decryptParams)
except Exception as ex:
Consumer._callOnError(onError,
EncryptError.ErrorCode.InvalidEncryptedFormat, repr(ex))
return
onPlainText(content)
else:
Consumer._callOnError(onError,
EncryptError.ErrorCode.UnsupportedEncryptionScheme,
repr(encryptedContent.getAlgorithmType()))
def _decryptContent(self, data, onPlainText, onError):
"""
Decrypt the data packet.
:param Data data: The data packet. This does not verify the packet.
:param onPlainText: When the data packet is decrypted, this calls
onPlainText(decryptedBlob) with the decrypted blob.
:type onPlainText: function object
:param onError: This calls onError(errorCode, message) for an error,
where errorCode is from EncryptError.ErrorCode and message is a str.
:type onError: function object
"""
# Get the encrypted content.
dataEncryptedContent = EncryptedContent()
try:
dataEncryptedContent.wireDecode(data.getContent())
except Exception as ex:
Consumer._callOnError(onError,
EncryptError.ErrorCode.InvalidEncryptedFormat, repr(ex))
return
cKeyName = dataEncryptedContent.getKeyLocator().getKeyName()
# Check if the content key is already in the store.
if cKeyName in self._cKeyMap:
cKey = self._cKeyMap[cKeyName]
self._decrypt(dataEncryptedContent, cKey, onPlainText, onError)
else:
# Retrieve the C-KEY Data from the network.
interestName = Name(cKeyName)
interestName.append(Encryptor.NAME_COMPONENT_FOR).append(self._groupName)
interest = Interest(interestName)
def onVerified(validCKeyData):
def localOnPlainText(cKeyBits):
# cKeyName is already a copy inside the local
# dataEncryptedContent.
self._cKeyMap[cKeyName] = cKeyBits
Consumer._decrypt(
dataEncryptedContent, cKeyBits, onPlainText, onError)
self._decryptCKey(validCKeyData, localOnPlainText, onError)
self._sendInterest(interest, 1, self._cKeyLink, onVerified, onError)
def _decryptCKey(self, cKeyData, onPlainText, onError):
"""
Decrypt cKeyData.
:param Data cKeyData: The C-KEY data packet.
:param onPlainText: When the data packet is decrypted, this calls
onPlainText(decryptedBlob) with the decrypted blob.
:type onPlainText: function object
:param onError: This calls onError(errorCode, message) for an error,
where errorCode is from EncryptError.ErrorCode and message is a str.
:type onError: function object
"""
# Get the encrypted content.
cKeyContent = cKeyData.getContent()
cKeyEncryptedContent = EncryptedContent()
try:
cKeyEncryptedContent.wireDecode(cKeyContent)
except Exception as ex:
try:
onError(EncryptError.ErrorCode.InvalidEncryptedFormat, repr(ex))
except:
logging.exception("Error in onError")
return
eKeyName = cKeyEncryptedContent.getKeyLocator().getKeyName()
dKeyName = eKeyName.getPrefix(-3)
dKeyName.append(Encryptor.NAME_COMPONENT_D_KEY).append(
eKeyName.getSubName(-2))
# Check if the decryption key is already in the store.
if dKeyName in self._dKeyMap:
dKey = self._dKeyMap[dKeyName]
Consumer._decrypt(cKeyEncryptedContent, dKey, onPlainText, onError)
else:
# Get the D-Key Data.
interestName = Name(dKeyName)
interestName.append(Encryptor.NAME_COMPONENT_FOR).append(
self._consumerName)
interest = Interest(interestName)
def onVerified(validDKeyData):
def localOnPlainText(dKeyBits):
# dKeyName is already a local copy.
self._dKeyMap[dKeyName] = dKeyBits
Consumer._decrypt(
cKeyEncryptedContent, dKeyBits, onPlainText, onError)
self._decryptDKey(validDKeyData, localOnPlainText, onError)
self._sendInterest(interest, 1, self._dKeyLink, onVerified, onError)
def _decryptDKey(self, dKeyData, onPlainText, onError):
"""
Decrypt dKeyData.
:param Data dKeyData: The D-KEY data packet.
:param onPlainText: When the data packet is decrypted, this calls
onPlainText(decryptedBlob) with the decrypted blob.
:type onPlainText: function object
:param onError: This calls onError(errorCode, message) for an error,
where errorCode is from EncryptError.ErrorCode and message is a str.
:type onError: function object
"""
# Get encrypted content.
dataContent = dKeyData.getContent()
# Process the nonce.
# dataContent is a sequence of the two EncryptedContent.
encryptedNonce = EncryptedContent()
try:
encryptedNonce.wireDecode(dataContent)
except Exception as ex:
try:
onError(EncryptError.ErrorCode.InvalidEncryptedFormat, repr(ex))
except:
logging.exception("Error in onError")
return
consumerKeyName = encryptedNonce.getKeyLocator().getKeyName()
# Get consumer decryption key.
try:
consumerKeyBlob = self._getDecryptionKey(consumerKeyName)
except Exception as ex:
Consumer._callOnError(onError,
EncryptError.ErrorCode.NoDecryptKey, "Database error: " + repr(ex))
return
if consumerKeyBlob.size() == 0:
try:
onError(EncryptError.ErrorCode.NoDecryptKey,
"The desired consumer decryption key in not in the database")
except:
logging.exception("Error in onError")
return
# Process the D-KEY.
# Use the size of encryptedNonce to find the start of encryptedPayload.
encryptedPayloadBlob = Blob(
dataContent.buf()[encryptedNonce.wireEncode().size():], False)
if encryptedPayloadBlob.size() == 0:
try:
onError(EncryptError.ErrorCode.InvalidEncryptedFormat,
"The data packet does not satisfy the D-KEY packet format")
except:
logging.exception("Error in onError")
return
# Decrypt the D-KEY.
Consumer._decrypt(
encryptedNonce, consumerKeyBlob,
lambda nonceKeyBits: Consumer._decrypt(
encryptedPayloadBlob, nonceKeyBits, onPlainText, onError),
onError)
def _sendInterest(self, interest, nRetrials, link, onVerified, onError):
"""
Express the interest, call verifyData for the fetched Data packet and
call onVerified if verify succeeds. If verify fails, call
onError(EncryptError.ErrorCode.Validation, "verifyData failed"). If the
interest times out, re-express nRetrials times. If the interest times
out nRetrials times, or for a network Nack, call
onError(EncryptError.ErrorCode.DataRetrievalFailure, interest.getName().toUri()).
:param Interest interest: The Interest to express.
:param int nRetrials: The number of retrials left after a timeout.
:param Link link: The Link object to use in the Interest. This does not
make a copy of the Link object. If the Link object's
getDelegations().size() is zero, don't use it.
:param onVerified: When the fetched Data packet validation succeeds,
this calls onVerified(data).
:type onVerified: function object
:param onError: This calls onError(errorCode, message) for an error,
where errorCode is from EncryptError.ErrorCode and message is a str.
:type onError: function object
"""
# Prepare the callback functions.
def onData(contentInterest, contentData):
# The Interest has no selectors, so assume the library correctly
# matched with the Data name before calling onData.
try:
self._keyChain.verifyData(
contentData, onVerified,
lambda d, reason: Consumer._callOnError(
onError, EncryptError.ErrorCode.Validation,
"verifyData failed. Reason: " + reason))
except Exception as ex:
try:
onError(EncryptError.ErrorCode.General, "verifyData error: " + repr(ex))
except:
logging.exception("Error in onError")
def onNetworkNack(interest, networkNack):
# We have run out of options. Report a retrieval failure.
try:
onError(EncryptError.ErrorCode.DataRetrievalFailure,
interest.getName().toUri())
except:
logging.exception("Error in onError")
def onTimeout(interest):
if nRetrials > 0:
self._sendInterest(interest, nRetrials - 1, link, onVerified, onError)
else:
onNetworkNack(interest, NetworkNack())
if link.getDelegations().size() == 0:
# We can use the supplied interest without copying.
request = interest
else:
# Copy the supplied interest and add the Link.
request = Interest(interest)
# This will use a cached encoding if available.
request.setLinkWireEncoding(link.wireEncode())
try:
self._face.expressInterest(request, onData, onTimeout, onNetworkNack)
except Exception as ex:
try:
onError(EncryptError.ErrorCode.General,
"expressInterest error: " + repr(ex))
except:
logging.exception("Error in onError")
def _getDecryptionKey(self, decryptionKeyName):
"""
Get the encoded blob of the decryption key with decryptionKeyName from
the database.
:param Name decryptionKeyName: The key name.
:return: A Blob with the encoded key, or an isNull Blob if cannot find
the key with keyName.
:rtype: Blob
:raises ConsumerDb.Error: For a database error.
"""
return self._database.getKey(decryptionKeyName)
@staticmethod
def _callOnError(onError, errorCode, message):
"""
Call onError(errorCode, message) within a try block to log exceptions
that it throws. We name this separate helper function to use inside
lambda expressions.
"""
try:
onError(errorCode, message)
except:
logging.exception("Error in onError")
NO_LINK = Link()
class Node(object):
"""
Create a new Node for communication with an NDN hub with the given Transport
object and connectionInfo.
:param Transport transport: An object of a subclass of Transport used for
communication.
:param Transport.ConnectionInfo connectionInfo: An object of a subclass of
Transport.ConnectionInfo to be used to connect to the transport.
"""
def __init__(self, transport, connectionInfo):
self._transport = transport
self._connectionInfo = connectionInfo
# An array of PendintInterest
self._pendingInterestTable = []
# An array of RegisteredPrefix
self._registeredPrefixTable = []
self._ndndIdFetcherInterest = Interest(
Name("/%C1.M.S.localhost/%C1.M.SRV/ndnd/KEY"))
self._ndndIdFetcherInterest.setInterestLifetimeMilliseconds(4000.0)
self._ndndId = None
self._commandInterestGenerator = CommandInterestGenerator()
self._timeoutPrefix = Name("/local/timeout")
def expressInterest(self, interest, onData, onTimeout, wireFormat):
"""
Send the Interest through the transport, read the entire response and
call onData(interest, data).
:param Interest interest: The Interest which is NOT copied for this
internal Node method. The Face expressInterest is reponsible for
making a copy for Node to use.
:param onData: A function object to call when a matching data packet is
received.
:type onData: function object
:param onTimeout: A function object to call if the interest times out.
If onTimeout is None, this does not use it.
:type onTimeout: function object
:param wireFormat: A WireFormat object used to encode the message.
:type wireFormat: a subclass of WireFormat
"""
# TODO: Properly check if we are already connected to the expected host.
if not self._transport.getIsConnected():
self._transport.connect(self._connectionInfo, self)
pendingInterestId = Node._PendingInterest.getNextPendingInterestId()
self._pendingInterestTable.append(
Node._PendingInterest(pendingInterestId, interest, onData,
onTimeout))
# Special case: For _timeoutPrefix we don't actually send the interest.
if not self._timeoutPrefix.match(interest.getName()):
self._transport.send(interest.wireEncode(wireFormat).toBuffer())
return pendingInterestId
def removePendingInterest(self, pendingInterestId):
"""
Remove the pending interest entry with the pendingInterestId from the
pending interest table. This does not affect another pending interest
with a different pendingInterestId, even if it has the same interest
name. If there is no entry with the pendingInterestId, do nothing.
:param int pendingInterestId: The ID returned from expressInterest.
"""
# Go backwards through the list so we can erase entries.
# Remove all entries even though pendingInterestId should be unique.
i = len(self._pendingInterestTable) - 1
while i >= 0:
if (self._pendingInterestTable[i].getPendingInterestId() ==
pendingInterestId):
self._pendingInterestTable.pop(i)
i -= 1
def makeCommandInterest(self, interest, keyChain, certificateName, wireFormat):
"""
Append a timestamp component and a random value component to interest's
name. Then use the keyChain and certificateName to sign the interest.
If the interest lifetime is not set, this sets it.
:param Interest interest: The interest whose name is append with
components.
:param KeyChain keyChain: The KeyChain for calling sign.
:param Name certificateName: The certificate name of the key to use for
signing.
:param wireFormat: A WireFormat object used to encode the
SignatureInfo and to encode the interest name for signing.
:type wireFormat: A subclass of WireFormat
"""
self._commandInterestGenerator.generate(
interest, keyChain, certificateName, wireFormat)
def registerPrefix(
self, prefix, onInterest, onRegisterFailed, flags, wireFormat,
commandKeyChain, commandCertificateName):
"""
Register prefix with the connected NDN hub and call onInterest when a
matching interest is received.
:param Name prefix: The Name for the prefix to register which is NOT
copied for this internal Node method. The Face registerPrefix is
reponsible for making a copy for Node to use..
:param onInterest: A function object to call when a matching interest is
received.
:type onInterest: function object
:param onRegisterFailed: A function object to call if failed to retrieve
the connected hub's ID or failed to register the prefix.
:type onRegisterFailed: function object
:param ForwardingFlags flags: The flags for finer control of which
interests are forwardedto the application.
:param wireFormat: A WireFormat object used to encode the message.
:type wireFormat: a subclass of WireFormat
:param KeyChain commandKeyChain: The KeyChain object for signing
interests. If null, assume we are connected to a legacy NDNx forwarder.
:param Name commandCertificateName: The certificate name for signing
interests.
"""
# Get the registeredPrefixId now so we can return it to the caller.
registeredPrefixId = Node._RegisteredPrefix.getNextRegisteredPrefixId()
# If we have an _ndndId, we know we already connected to NDNx.
if self._ndndId != None or commandKeyChain == None:
# Assume we are connected to a legacy NDNx server.
if self._ndndId == None:
# First fetch the ndndId of the connected hub.
fetcher = Node._NdndIdFetcher(
self, registeredPrefixId, prefix, onInterest, onRegisterFailed,
flags, wireFormat)
# We send the interest using the given wire format so that the hub
# receives (and sends) in the application's desired wire format.
self.expressInterest(
self._ndndIdFetcherInterest, fetcher.onData, fetcher.onTimeout,
wireFormat)
else:
self._registerPrefixHelper(
registeredPrefixId, Name(prefix), onInterest, onRegisterFailed,
flags, wireFormat)
else:
# The application set the KeyChain for signing NFD interests.
self._nfdRegisterPrefix(
registeredPrefixId, Name(prefix), onInterest,
onRegisterFailed, flags, commandKeyChain, commandCertificateName)
return registeredPrefixId
def removeRegisteredPrefix(self, registeredPrefixId):
"""
Remove the registered prefix entry with the registeredPrefixId from the
registered prefix table. This does not affect another registered prefix
with a different registeredPrefixId, even if it has the same prefix
name. If there is no entry with the registeredPrefixId, do nothing.
:param int registeredPrefixId: The ID returned from registerPrefix.
"""
# Go backwards through the list so we can erase entries.
# Remove all entries even though registeredPrefixId should be unique.
i = len(self._registeredPrefixTable) - 1
while i >= 0:
if (self._registeredPrefixTable[i].getRegisteredPrefixId() ==
registeredPrefixId):
self._registeredPrefixTable.pop(i)
i -= 1
def processEvents(self):
"""
Process any packets to receive and call callbacks such as onData,
onInterest or onTimeout. This returns immediately if there is no data to
receive. This blocks while calling the callbacks. You should repeatedly
call this from an event loop, with calls to sleep as needed so that the
loop doesn't use 100% of the CPU. Since processEvents modifies the pending
interest table, your application should make sure that it calls
processEvents in the same thread as expressInterest (which also modifies
the pending interest table).
:raises: This may raise an exception for reading data or in the callback
for processing the data. If you call this from an main event loop,
you may want to catch and log/disregard all exceptions.
"""
self._transport.processEvents()
# Check for PIT entry timeouts. Go backwards through the list so we can
# erase entries.
nowMilliseconds = Common.getNowMilliseconds()
i = len(self._pendingInterestTable) - 1
while i >= 0:
if self._pendingInterestTable[i].isTimedOut(nowMilliseconds):
# Save the PendingInterest and remove it from the PIT. Then
# call the callback.
pendingInterest = self._pendingInterestTable[i]
self._pendingInterestTable.pop(i)
pendingInterest.callTimeout()
# Refresh now since the timeout callback might have delayed.
nowMilliseconds = Common.getNowMilliseconds()
i -= 1
def getTransport(self):
"""
Get the transport object given to the constructor.
:return: The transport object.
:rtype: Transport
"""
return self._transport
def getConnectionInfo(self):
"""
Get the connectionInfo object given to the constructor.
:return: The connectionInfo object.
:rtype: Transport.ConnectionInfo
"""
return self._connectionInfo
def onReceivedElement(self, element):
"""
This is called by the transport's ElementReader to process an
entire received Data or Interest element.
:param element: The bytes of the incoming element.
:type element: An array type with int elements
"""
# The type codes for TLV Interest and Data packets are chosen to not
# conflict with the first byte of a binary XML packet, so we canjust
# look at the first byte.
if not (element[0] == Tlv.Interest or element[0] == Tlv.Data):
# Ignore non-TLV elements.
return
# First, decode as Interest or Data.
interest = None
data = None
decoder = TlvDecoder(element)
if decoder.peekType(Tlv.Interest, len(element)):
interest = Interest()
interest.wireDecode(element, TlvWireFormat.get())
elif decoder.peekType(Tlv.Data, len(element)):
data = Data()
data.wireDecode(element, TlvWireFormat.get())
# Now process as Interest or Data.
if interest != None:
entry = self._getEntryForRegisteredPrefix(interest.getName())
if entry != None:
entry.getOnInterest()(
entry.getPrefix(), interest, self._transport,
entry.getRegisteredPrefixId())
elif data != None:
pendingInterests = self._extractEntriesForExpressedInterest(
data.getName())
for pendingInterest in pendingInterests:
pendingInterest.getOnData()(pendingInterest.getInterest(), data)
def shutdown(self):
"""
Call getTransport().close().
"""
self._transport.close()
def _extractEntriesForExpressedInterest(self, name):
"""
Find all entries from the _pendingInterestTable where the name conforms
to the entry's interest selectors, remove the entries from the table
and return them.
:param Name name: The name to find the interest for (from the incoming
data packet).
:return: The matching entries from the _pendingInterestTable, or []
if none are found.
:rtype: array of _PendingInterest
"""
result = []
# Go backwards through the list so we can erase entries.
i = len(self._pendingInterestTable) - 1
while i >= 0:
if self._pendingInterestTable[i].getInterest().matchesName(name):
result.append(self._pendingInterestTable[i])
self._pendingInterestTable.pop(i)
i -= 1
return result
def _getEntryForRegisteredPrefix(self, name):
"""
Find the first entry from the _registeredPrefixTable where the entry
prefix is the longest that matches name.
:param Name name: The name to find the RegisteredPrefix for (from the
incoming interest packet).
:return: The registered prefix entry, or None of not found.
:rtype: _RegisteredPrefix
"""
iResult = -1
for i in range(len(self._registeredPrefixTable)):
if self._registeredPrefixTable[i].getPrefix().match(name):
if (iResult < 0 or
self._registeredPrefixTable[i].getPrefix().size() >
self._registeredPrefixTable[iResult].getPrefix().size()):
# Update to the longer match.
iResult = i
if iResult >= 0:
return self._registeredPrefixTable[iResult]
else:
return None
def _registerPrefixHelper(
self, registeredPrefixId, prefix, onInterest, onRegisterFailed, flags,
wireFormat):
"""
Do the work of registerPrefix to register with NDNx once we have an
_ndndId.
:param int registeredPrefixId: The
_RegisteredPrefix.getNextRegisteredPrefixId() which registerPrefix got
so it could return it to the caller. If this is 0, then don't add to
_registeredPrefixTable (assuming it has already been done).
"""
# Create a ForwardingEntry.
# Note: ndnd ignores any freshness that is larger than 3600 seconds and
# sets 300 seconds instead. To register "forever", (=2000000000 sec),
# the freshness period must be omitted.
forwardingEntry = ForwardingEntry()
forwardingEntry.setAction("selfreg")
forwardingEntry.setPrefix(prefix)
forwardingEntry.setForwardingFlags(flags)
content = forwardingEntry.wireEncode(wireFormat)
# Set the ForwardingEntry as the content of a Data packet and sign.
data = Data()
data.setContent(content)
# Set the name to a random value so that each request is unique.
nonce = bytearray(4)
for i in range(len(nonce)):
nonce[i] = _systemRandom.randint(0, 0xff)
data.getName().append(nonce)
# The ndnd ignores the signature, so set to blank values.
data.getSignature().getKeyLocator().setType(
KeyLocatorType.KEY_LOCATOR_DIGEST)
data.getSignature().getKeyLocator().setKeyData(
Blob(bytearray(32), False))
data.getSignature().setSignature(Blob(bytearray(128), False))
encodedData = data.wireEncode(wireFormat)
# Create an interest where the name has the encoded Data packet.
interestName = Name().append("ndnx").append(self._ndndId).append(
"selfreg").append(encodedData)
interest = Interest(interestName)
interest.setInterestLifetimeMilliseconds(4000.0)
interest.setScope(1)
encodedInterest = interest.wireEncode(wireFormat)
if registeredPrefixId != 0:
# Save the onInterest callback and send the registration interest.
self._registeredPrefixTable.append(Node._RegisteredPrefix(
registeredPrefixId, prefix, onInterest))
response = Node._RegisterResponse(
self, prefix, onInterest, onRegisterFailed, flags, wireFormat, False)
self.expressInterest(
interest, response.onData, response.onTimeout, wireFormat)
def _nfdRegisterPrefix(
self, registeredPrefixId, prefix, onInterest, onRegisterFailed, flags,
commandKeyChain, commandCertificateName):
"""
Do the work of registerPrefix to register with NFD.
:param int registeredPrefixId: The
_RegisteredPrefix.getNextRegisteredPrefixId() which registerPrefix got
so it could return it to the caller. If this is 0, then don't add to
_registeredPrefixTable (assuming it has already been done).
"""
if commandKeyChain == None:
raise RuntimeError(
"registerPrefix: The command KeyChain has not been set. You must call setCommandSigningInfo.")
if commandCertificateName.size() == 0:
raise RuntimeError(
"registerPrefix: The command certificate name has not been set. You must call setCommandSigningInfo.")
controlParameters = ControlParameters()
controlParameters.setName(prefix)
commandInterest = Interest(Name("/localhost/nfd/rib/register"))
# NFD only accepts TlvWireFormat packets.
commandInterest.getName().append(controlParameters.wireEncode(TlvWireFormat.get()))
self.makeCommandInterest(
commandInterest, commandKeyChain, commandCertificateName,
TlvWireFormat.get())
# The interest is answered by the local host, so set a short timeout.
commandInterest.setInterestLifetimeMilliseconds(2000.0)
if registeredPrefixId != 0:
# Save the onInterest callback and send the registration interest.
self._registeredPrefixTable.append(Node._RegisteredPrefix(
registeredPrefixId, prefix, onInterest))
response = Node._RegisterResponse(
self, prefix, onInterest, onRegisterFailed, flags,
TlvWireFormat.get(), True)
self.expressInterest(
commandInterest, response.onData, response.onTimeout,
TlvWireFormat.get())
class _PendingInterest(object):
"""
_PendingInterest is a private class for the members of the
_pendingInterestTable. Create a new PendingInterest and set the
_timeoutTime based on the current time and the interest lifetime.
:param int pendingInterestId: A unique ID for this entry, which you
should get with getNextPendingInteresId().
:param Interest interest: The interest.
:param onData: A function object to call when a matching data packet is
received.
:type onData: function object
:param onTimeout: A function object to call if the interest times out.
If onTimeout is None, this does not use it.
:type onTimeout: function object
"""
def __init__(self, pendingInterestId, interest, onData, onTimeout):
self._pendingInterestId = pendingInterestId
self._interest = interest
self._onData = onData
self._onTimeout = onTimeout
# Set up _timeoutTimeMilliseconds.
if (self._interest.getInterestLifetimeMilliseconds() != None and
self._interest.getInterestLifetimeMilliseconds() >= 0.0):
self._timeoutTimeMilliseconds = (Common.getNowMilliseconds() +
self._interest.getInterestLifetimeMilliseconds())
else:
# No timeout.
self._timeoutTimeMilliseconds = None
_lastPendingInterestId = 0
@staticmethod
def getNextPendingInterestId():
"""
Get the next unique pending interest ID.
:return: The next pending interest ID.
:rtype: int
"""
Node._PendingInterest._lastPendingInterestId += 1
return Node._PendingInterest._lastPendingInterestId
def getPendingInterestId(self):
"""
Get the pendingInterestId given to the constructor.
:return: The pending interest ID.
:rtype: int
"""
return self._pendingInterestId
def getInterest(self):
"""
Get the interest given to the constructor.
:return: The interest.
:rtype: int
"""
return self._interest
def getOnData(self):
"""
Get the onData function object given to the constructor.
:return: The onData function object.
:rtype: function object
"""
return self._onData
def isTimedOut(self, nowMilliseconds):
"""
Check if this interest is timed out.
:param float nowMilliseconds: The current time in milliseconds from
Common.getNowMilliseconds().
:return: True if this interest timed out, otherwise False.
:rtype: bool
"""
return (self._timeoutTimeMilliseconds != None and
nowMilliseconds >= self._timeoutTimeMilliseconds)
def callTimeout(self):
"""
Call _onTimeout (if defined). This ignores exceptions from
_onTimeout.
"""
if self._onTimeout:
# Ignore all exceptions.
try:
self._onTimeout(self._interest)
except:
pass
class _RegisteredPrefix(object):
"""
_RegisteredPrefix is a private class for the members of the
_registeredPrefixTable. Create a new RegisteredPrefix with the
given values.
:param int registeredPrefixId: A unique ID for this entry, which you
should get with getNextRegisteredPrefixId().
:param Name prefix: The name prefix.
:param onInterest: A function object to call when a matching data packet
is received.
:type onInterest: function object
"""
def __init__(self, registeredPrefixId, prefix, onInterest):
self._registeredPrefixId = registeredPrefixId
self._prefix = prefix
self._onInterest = onInterest
_lastRegisteredPrefixId = 0
@staticmethod
def getNextRegisteredPrefixId():
"""
Get the next unique registered prefix ID.
:return: The next registered prefix ID.
:rtype: int
"""
Node._RegisteredPrefix._lastRegisteredPrefixId += 1
return Node._RegisteredPrefix._lastRegisteredPrefixId
def getRegisteredPrefixId(self):
"""
Get the registeredPrefixId given to the constructor.
:return: The registered prefix ID.
:rtype: int
"""
return self._registeredPrefixId
def getPrefix(self):
"""
Get the name prefix to the constructor.
:return: The name prefix.
:rtype: Name
"""
return self._prefix
def getOnInterest(self):
"""
Get the onInterest function object given to the constructor.
:return: The onInterest function object.
:rtype: function object
"""
return self._onInterest
class _NdndIdFetcher(object):
"""
An _NdndIdFetcher receives the Data packet with the publisher public key
digest for the connected NDN hub.
"""
def __init__(self, node, registeredPrefixId, prefix, onInterest,
onRegisterFailed, flags, wireFormat):
self._node = node
self._registeredPrefixId = registeredPrefixId
self._prefix = prefix
self._onInterest = onInterest
self._onRegisterFailed = onRegisterFailed
self._flags = flags
self._wireFormat = wireFormat
def onData(self, interest, ndndIdData):
"""
We received the ndnd ID.
"""
# Assume that the content is a DER encoded public key of the ndnd.
# Do a quick check that the first byte is for DER encoding.
if (ndndIdData.getContent().size() < 1 or
ndndIdData.getContent().buf()[0] != 0x30):
logging.getLogger(__name__).info(
"Register prefix failed: The content returned when fetching the NDNx ID does not appear to be a public key")
self._onRegisterFailed(self._prefix)
return
# Get the digest of the public key.
digest = bytearray(
hashlib.sha256(ndndIdData.getContent().toBuffer()).digest())
# Set the _ndndId and continue.
# TODO: If there are multiple connected hubs, the NDN ID is really
# stored per connected hub.
self._node._ndndId = Blob(digest, False)
self._node._registerPrefixHelper(
self._registeredPrefixId, self._prefix, self._onInterest,
self._onRegisterFailed, self._flags, self._wireFormat)
def onTimeout(self, interest):
"""
We timed out fetching the ndnd ID.
"""
logging.getLogger(__name__).info(
"Register prefix failed: Timeout fetching the NDNx ID")
self._onRegisterFailed(self._prefix)
class _RegisterResponse(object):
"""
A _RegisterResponse receives the response Data packet from the register
prefix interest sent to the connected NDN hub. If this gets a bad
response or a timeout, call onRegisterFailed.
"""
def __init__(self, node, prefix, onInterest, onRegisterFailed, flags,
wireFormat, isNfdCommand):
self._node = node
self._prefix = prefix
self._onInterest = onInterest
self._onRegisterFailed = onRegisterFailed
self._flags = flags
self._wireFormat = wireFormat
self._isNfdCommand = isNfdCommand
def onData(self, interest, responseData):
"""
We received the response. Do a quick check of expected name
components.
"""
if self._isNfdCommand:
# Decode responseData->getContent() and check for a success code.
# TODO: Move this into the TLV code.
statusCode = None
try:
decoder = TlvDecoder(responseData.getContent().buf())
decoder.readNestedTlvsStart(Tlv.NfdCommand_ControlResponse)
statusCode = decoder.readNonNegativeIntegerTlv(Tlv.NfdCommand_StatusCode)
except ValueError as ex:
logging.getLogger(__name__).info(
"Register prefix failed: Error decoding the NFD response: %s",
str(ex))
self._onRegisterFailed(self._prefix)
return
# Status code 200 is "OK".
if statusCode != 200:
logging.getLogger(__name__).info(
"Register prefix failed: Expected NFD status code 200, got: %d",
statusCode)
self._onRegisterFailed(self._prefix)
logging.getLogger(__name__).info(
"Register prefix succeeded with the NFD forwarder for prefix %s",
self._prefix.toUri())
else:
expectedName = Name("/ndnx/.../selfreg")
if (responseData.getName().size() < 4 or
responseData.getName()[0] != expectedName[0] or
responseData.getName()[2] != expectedName[2]):
logging.getLogger(__name__).info(
"Register prefix failed: Unexpected name in NDNx response: %s",
responseData.getName().toUri())
self._onRegisterFailed(self._prefix)
return
logging.getLogger(__name__).info(
"Register prefix succeeded with the NDNx forwarder for prefix %s",
self._prefix.toUri())
def onTimeout(self, interest):
"""
We timed out waiting for the response.
"""
if self._isNfdCommand:
logging.getLogger(__name__).info(
"Timeout for NFD register prefix command. Attempting an NDNx command...")
# The application set the commandKeyChain, but we may be
# connected to NDNx.
if self._node._ndndId == None:
# First fetch the ndndId of the connected hub.
# Pass 0 for registeredPrefixId since the entry was already added to
# _registeredPrefixTable on the first try.
fetcher = Node._NdndIdFetcher(
self._node, 0, self._prefix, self._onInterest,
self._onRegisterFailed, self._flags, self._wireFormat)
# We send the interest using the given wire format so that the hub
# receives (and sends) in the application's desired wire format.
self._node.expressInterest(
self._node._ndndIdFetcherInterest, fetcher.onData,
fetcher.onTimeout, self._wireFormat)
else:
# Pass 0 for registeredPrefixId since the entry was already
# added to _registeredPrefixTable on the first try.
self._node._registerPrefixHelper(
0, self._prefix, self._onInterest, self._onRegisterFailed,
self._flags, self._wireFormat)
else:
# An NDNx command was sent because there is no commandKeyChain,
# so we can't try an NFD command. Or it was sent from this
# callback after trying an NFD command. Fail.
logging.getLogger(__name__).info(
"Register prefix failed: Timeout waiting for the response from the register prefix interest")
self._onRegisterFailed(self._prefix)
