def test_one_dof():
# This is for a 1 dof spring-mass-damper case.
# It is described in more detail in the Kane docstring.
q, u = dynamicsymbols('q u')
qd, ud = dynamicsymbols('q u', 1)
m, c, k = symbols('m c k')
N = ReferenceFrame('N')
P = Point('P')
P.set_vel(N, u * N.x)
kd = [qd - u]
FL = [(P, (-k * q - c * u) * N.x)]
pa = Particle()
pa.mass = m
pa.point = P
BL = [pa]
KM = Kane(N)
KM.coords([q])
KM.speeds([u])
KM.kindiffeq(kd)
KM.kanes_equations(FL, BL)
MM = KM.mass_matrix
forcing = KM.forcing
rhs = MM.inv() * forcing
assert expand(rhs[0]) == expand(-(q * k + u * c) / m)
assert KM.linearize() == (Matrix([[0, 1], [k, c]]), Matrix([]))
def test_pend():
q, u = dynamicsymbols('q u')
qd, ud = dynamicsymbols('q u', 1)
m, l, g = symbols('m l g')
N = ReferenceFrame('N')
P = Point('P')
P.set_vel(N, -l * u * sin(q) * N.x + l * u * cos(q) * N.y)
kd = [qd - u]
FL = [(P, m * g * N.x)]
pa = Particle()
pa.mass = m
pa.point = P
BL = [pa]
KM = Kane(N)
KM.coords([q])
KM.speeds([u])
KM.kindiffeq(kd)
KM.kanes_equations(FL, BL)
MM = KM.mass_matrix
forcing = KM.forcing
rhs = MM.inv() * forcing
rhs.simplify()
assert expand(rhs[0]) == expand(-g / l * sin(q))
def test_parallel_axis():
# This is for a 2 dof inverted pendulum on a cart.
# This tests the parallel axis code in Kane. The inertia of the pendulum is
# defined about the hinge, not about the center of mass.
# Defining the constants and knowns of the system
gravity = symbols('g')
k, ls = symbols('k ls')
a, mA, mC = symbols('a mA mC')
F = dynamicsymbols('F')
Ix, Iy, Iz = symbols('Ix Iy Iz')
# Declaring the Generalized coordinates and speeds
q1, q2 = dynamicsymbols('q1 q2')
q1d, q2d = dynamicsymbols('q1 q2', 1)
u1, u2 = dynamicsymbols('u1 u2')
u1d, u2d = dynamicsymbols('u1 u2', 1)
# Creating reference frames
N = ReferenceFrame('N')
A = ReferenceFrame('A')
A.orient(N, 'Axis', [-q2, N.z])
A.set_ang_vel(N, -u2 * N.z)
# Origin of Newtonian reference frame
O = Point('O')
# Creating and Locating the positions of the cart, C, and the
# center of mass of the pendulum, A
C = O.locatenew('C', q1 * N.x)
Ao = C.locatenew('Ao', a * A.y)
# Defining velocities of the points
O.set_vel(N, 0)
C.set_vel(N, u1 * N.x)
Ao.v2pt_theory(C, N, A)
Cart = Particle('Cart', C, mC)
Pendulum = RigidBody('Pendulum', Ao, A, mA, (inertia(A, Ix, Iy, Iz), C))
# kinematical differential equations
kindiffs = [q1d - u1, q2d - u2]
bodyList = [Cart, Pendulum]
forceList = [(Ao, -N.y * gravity * mA),
(C, -N.y * gravity * mC),
(C, -N.x * k * (q1 - ls)),
(C, N.x * F)]
km=Kane(N)
km.coords([q1, q2])
km.speeds([u1, u2])
km.kindiffeq(kindiffs)
(fr,frstar) = km.kanes_equations(forceList, bodyList)
mm = km.mass_matrix_full
assert mm[3, 3] == -Iz
def test_aux():
# Same as above, except we have 2 auxiliary speeds for the ground contact
# point, which is known to be zero. In one case, we go through then
# substitute the aux. speeds in at the end (they are zero, as well as their
# derivative), in the other case, we use the built-in auxiliary speed part
# of Kane. The equations from each should be the same.
q1, q2, q3, u1, u2, u3 = dynamicsymbols('q1 q2 q3 u1 u2 u3')
q1d, q2d, q3d, u1d, u2d, u3d = dynamicsymbols('q1 q2 q3 u1 u2 u3', 1)
u4, u5, f1, f2 = dynamicsymbols('u4, u5, f1, f2')
u4d, u5d = dynamicsymbols('u4, u5', 1)
r, m, g = symbols('r m g')
N = ReferenceFrame('N')
Y = N.orientnew('Y', 'Axis', [q1, N.z])
L = Y.orientnew('L', 'Axis', [q2, Y.x])
R = L.orientnew('R', 'Axis', [q3, L.y])
R.set_ang_vel(N, u1 * L.x + u2 * L.y + u3 * L.z)
R.set_ang_acc(N, R.ang_vel_in(N).dt(R) + (R.ang_vel_in(N) ^
R.ang_vel_in(N)))
C = Point('C')
C.set_vel(N, u4 * L.x + u5 * (Y.z ^ L.x))
Dmc = C.locatenew('Dmc', r * L.z)
Dmc.v2pt_theory(C, N, R)
Dmc.a2pt_theory(C, N, R)
I = inertia(L, m / 4 * r**2, m / 2 * r**2, m / 4 * r**2)
kd = [q1d - u3/cos(q3), q2d - u1, q3d - u2 + u3 * tan(q2)]
ForceList = [(Dmc, - m * g * Y.z), (C, f1 * L.x + f2 * (Y.z ^ L.x))]
BodyD = RigidBody()
BodyD.mc = Dmc
BodyD.inertia = (I, Dmc)
BodyD.frame = R
BodyD.mass = m
BodyList = [BodyD]
KM = Kane(N)
KM.coords([q1, q2, q3])
KM.speeds([u1, u2, u3, u4, u5])
KM.kindiffeq(kd)
kdd = KM.kindiffdict()
(fr, frstar) = KM.kanes_equations(ForceList, BodyList)
fr = fr.subs({u4d: 0, u5d: 0}).subs({u4: 0, u5:0})
frstar = frstar.subs({u4d: 0, u5d: 0}).subs({u4: 0, u5:0})
KM2 = Kane(N)
KM2.coords([q1, q2, q3])
KM2.speeds([u1, u2, u3], u_auxiliary=[u4, u5])
KM2.kindiffeq(kd)
(fr2, frstar2) = KM2.kanes_equations(ForceList, BodyList)
fr2 = fr2.subs({u4d: 0, u5d: 0}).subs({u4: 0, u5:0})
frstar2 = frstar2.subs({u4d: 0, u5d: 0}).subs({u4: 0, u5:0})
assert fr.expand() == fr2.expand()
assert frstar.expand() == frstar2.expand()
def test_pend():
q, u = dynamicsymbols('q u')
qd, ud = dynamicsymbols('q u', 1)
m, l, g = symbols('m l g')
N = ReferenceFrame('N')
P = Point('P')
P.set_vel(N, -l * u * sin(q) * N.x + l * u * cos(q) * N.y)
kd = [qd - u]
FL = [(P, m * g * N.x)]
pa = Particle()
pa.mass = m
pa.point = P
BL = [pa]
KM = Kane(N)
KM.coords([q])
KM.speeds([u])
KM.kindiffeq(kd)
KM.kanes_equations(FL, BL)
MM = KM.mass_matrix
forcing = KM.forcing
rhs = MM.inv() * forcing
rhs.simplify()
assert expand(rhs[0]) == expand(-g / l * sin(q))
def test_two_dof():
# This is for a 2 d.o.f., 2 particle spring-mass-damper.
# The first coordinate is the displacement of the first particle, and the
# second is the relative displacement between the first and second
# particles. Speeds are defined as the time derivatives of the particles.
q1, q2, u1, u2 = dynamicsymbols("q1 q2 u1 u2")
q1d, q2d, u1d, u2d = dynamicsymbols("q1 q2 u1 u2", 1)
m, c1, c2, k1, k2 = symbols("m c1 c2 k1 k2")
N = ReferenceFrame("N")
P1 = Point("P1")
P2 = Point("P2")
P1.set_vel(N, u1 * N.x)
P2.set_vel(N, (u1 + u2) * N.x)
kd = [q1d - u1, q2d - u2]
# Now we create the list of forces, then assign properties to each
# particle, then create a list of all particles.
FL = [(P1, (-k1 * q1 - c1 * u1 + k2 * q2 + c2 * u2) * N.x), (P2, (-k2 * q2 - c2 * u2) * N.x)]
pa1 = Particle("pa1", P1, m)
pa2 = Particle("pa2", P2, m)
BL = [pa1, pa2]
# Finally we create the Kane object, specify the inertial frame, pass
# relevant information, and form Fr & Fr*. Then we calculate the mass
# matrix and forcing terms, and finally solve for the udots.
KM = Kane(N)
KM.coords([q1, q2])
KM.speeds([u1, u2])
KM.kindiffeq(kd)
KM.kanes_equations(FL, BL)
MM = KM.mass_matrix
forcing = KM.forcing
rhs = MM.inv() * forcing
assert expand(rhs[0]) == expand((-k1 * q1 - c1 * u1 + k2 * q2 + c2 * u2) / m)
assert expand(rhs[1]) == expand((k1 * q1 + c1 * u1 - 2 * k2 * q2 - 2 * c2 * u2) / m)
def test_parallel_axis():
# This is for a 2 dof inverted pendulum on a cart.
# This tests the parallel axis code in Kane. The inertia of the pendulum is
# defined about the hinge, not about the center of mass.
# Defining the constants and knowns of the system
gravity = symbols('g')
k, ls = symbols('k ls')
a, mA, mC = symbols('a mA mC')
F = dynamicsymbols('F')
Ix, Iy, Iz = symbols('Ix Iy Iz')
# Declaring the Generalized coordinates and speeds
q1, q2 = dynamicsymbols('q1 q2')
q1d, q2d = dynamicsymbols('q1 q2', 1)
u1, u2 = dynamicsymbols('u1 u2')
u1d, u2d = dynamicsymbols('u1 u2', 1)
# Creating reference frames
N = ReferenceFrame('N')
A = ReferenceFrame('A')
A.orient(N, 'Axis', [-q2, N.z])
A.set_ang_vel(N, -u2 * N.z)
# Origin of Newtonian reference frame
O = Point('O')
# Creating and Locating the positions of the cart, C, and the
# center of mass of the pendulum, A
C = O.locatenew('C', q1 * N.x)
Ao = C.locatenew('Ao', a * A.y)
# Defining velocities of the points
O.set_vel(N, 0)
C.set_vel(N, u1 * N.x)
Ao.v2pt_theory(C, N, A)
Cart = Particle('Cart', C, mC)
Pendulum = RigidBody('Pendulum', Ao, A, mA, (inertia(A, Ix, Iy, Iz), C))
# kinematical differential equations
kindiffs = [q1d - u1, q2d - u2]
bodyList = [Cart, Pendulum]
forceList = [(Ao, -N.y * gravity * mA), (C, -N.y * gravity * mC),
(C, -N.x * k * (q1 - ls)), (C, N.x * F)]
km = Kane(N)
km.coords([q1, q2])
km.speeds([u1, u2])
km.kindiffeq(kindiffs)
(fr, frstar) = km.kanes_equations(forceList, bodyList)
mm = km.mass_matrix_full
assert mm[3, 3] == -Iz
def test_two_dof():
# This is for a 2 d.o.f., 2 particle spring-mass-damper.
# The first coordinate is the displacement of the first particle, and the
# second is the relative displacement between the first and second
# particles. Speeds are defined as the time derivatives of the particles.
q1, q2, u1, u2 = dynamicsymbols('q1 q2 u1 u2')
q1d, q2d, u1d, u2d = dynamicsymbols('q1 q2 u1 u2', 1)
m, c1, c2, k1, k2 = symbols('m c1 c2 k1 k2')
N = ReferenceFrame('N')
P1 = Point('P1')
P2 = Point('P2')
P1.set_vel(N, u1 * N.x)
P2.set_vel(N, (u1 + u2) * N.x)
kd = [q1d - u1, q2d - u2]
# Now we create the list of forces, then assign properties to each
# particle, then create a list of all particles.
FL = [(P1, (-k1 * q1 - c1 * u1 + k2 * q2 + c2 * u2) * N.x),
(P2, (-k2 * q2 - c2 * u2) * N.x)]
pa1 = Particle()
pa2 = Particle()
pa1.mass = m
pa2.mass = m
pa1.point = P1
pa2.point = P2
BL = [pa1, pa2]
# Finally we create the Kane object, specify the inertial frame, pass
# relevant information, and form Fr & Fr*. Then we calculate the mass
# matrix and forcing terms, and finally solve for the udots.
KM = Kane(N)
KM.coords([q1, q2])
KM.speeds([u1, u2])
KM.kindiffeq(kd)
KM.kanes_equations(FL, BL)
MM = KM.mass_matrix
forcing = KM.forcing
rhs = MM.inv() * forcing
assert expand(rhs[0]) == expand(
(-k1 * q1 - c1 * u1 + k2 * q2 + c2 * u2) / m)
assert expand(rhs[1]) == expand(
(k1 * q1 + c1 * u1 - 2 * k2 * q2 - 2 * c2 * u2) / m)
def test_rolling_disc():
# Rolling Disc Example
# Here the rolling disc is formed from the contact point up, removing the
# need to introduce generalized speeds. Only 3 configuration and three
# speed variables are need to describe this system, along with the disc's
# mass and radius, and the local gravity (note that mass will drop out).
q1, q2, q3, u1, u2, u3 = dynamicsymbols('q1 q2 q3 u1 u2 u3')
q1d, q2d, q3d, u1d, u2d, u3d = dynamicsymbols('q1 q2 q3 u1 u2 u3', 1)
r, m, g = symbols('r m g')
# The kinematics are formed by a series of simple rotations. Each simple
# rotation creates a new frame, and the next rotation is defined by the new
# frame's basis vectors. This example uses a 3-1-2 series of rotations, or
# Z, X, Y series of rotations. Angular velocity for this is defined using
# the second frame's basis (the lean frame).
N = ReferenceFrame('N')
Y = N.orientnew('Y', 'Axis', [q1, N.z])
L = Y.orientnew('L', 'Axis', [q2, Y.x])
R = L.orientnew('R', 'Axis', [q3, L.y])
R.set_ang_vel(N, u1 * L.x + u2 * L.y + u3 * L.z)
R.set_ang_acc(N,
R.ang_vel_in(N).dt(R) + (R.ang_vel_in(N) ^ R.ang_vel_in(N)))
# This is the translational kinematics. We create a point with no velocity
# in N; this is the contact point between the disc and ground. Next we form
# the position vector from the contact point to the disc's center of mass.
# Finally we form the velocity and acceleration of the disc.
C = Point('C')
C.set_vel(N, 0)
Dmc = C.locatenew('Dmc', r * L.z)
Dmc.v2pt_theory(C, N, R)
Dmc.a2pt_theory(C, N, R)
# This is a simple way to form the inertia dyadic.
I = inertia(L, m / 4 * r**2, m / 2 * r**2, m / 4 * r**2)
# Kinematic differential equations; how the generalized coordinate time
# derivatives relate to generalized speeds.
kd = [q1d - u3 / cos(q2), q2d - u1, q3d - u2 + u3 * tan(q2)]
# Creation of the force list; it is the gravitational force at the mass
# center of the disc. Then we create the disc by assigning a Point to the
# center of mass attribute, a ReferenceFrame to the frame attribute, and mass
# and inertia. Then we form the body list.
ForceList = [(Dmc, -m * g * Y.z)]
BodyD = RigidBody('BodyD', Dmc, R, m, (I, Dmc))
BodyList = [BodyD]
# Finally we form the equations of motion, using the same steps we did
# before. Specify inertial frame, supply generalized speeds, supply
# kinematic differential equation dictionary, compute Fr from the force
# list and Fr* from the body list, compute the mass matrix and forcing
# terms, then solve for the u dots (time derivatives of the generalized
# speeds).
KM = Kane(N)
KM.coords([q1, q2, q3])
KM.speeds([u1, u2, u3])
KM.kindiffeq(kd)
KM.kanes_equations(ForceList, BodyList)
MM = KM.mass_matrix
forcing = KM.forcing
rhs = MM.inv() * forcing
kdd = KM.kindiffdict()
rhs = rhs.subs(kdd)
assert rhs.expand() == Matrix([
(10 * u2 * u3 * r - 5 * u3**2 * r * tan(q2) + 4 * g * sin(q2)) /
(5 * r), -2 * u1 * u3 / 3, u1 * (-2 * u2 + u3 * tan(q2))
]).expand()
def test_one_dof():
# This is for a 1 dof spring-mass-damper case.
# It is described in more detail in the Kane docstring.
q, u = dynamicsymbols('q u')
qd, ud = dynamicsymbols('q u', 1)
m, c, k = symbols('m c k')
N = ReferenceFrame('N')
P = Point('P')
P.set_vel(N, u * N.x)
kd = [qd - u]
FL = [(P, (-k * q - c * u) * N.x)]
pa = Particle('pa', P, m)
BL = [pa]
KM = Kane(N)
KM.coords([q])
KM.speeds([u])
KM.kindiffeq(kd)
KM.kanes_equations(FL, BL)
MM = KM.mass_matrix
forcing = KM.forcing
rhs = MM.inv() * forcing
assert expand(rhs[0]) == expand(-(q * k + u * c) / m)
assert KM.linearize() == (Matrix([[0, 1], [k, c]]), Matrix([]), Matrix([]))
def test_aux():
# Same as above, except we have 2 auxiliary speeds for the ground contact
# point, which is known to be zero. In one case, we go through then
# substitute the aux. speeds in at the end (they are zero, as well as their
# derivative), in the other case, we use the built-in auxiliary speed part
# of Kane. The equations from each should be the same.
q1, q2, q3, u1, u2, u3 = dynamicsymbols('q1 q2 q3 u1 u2 u3')
q1d, q2d, q3d, u1d, u2d, u3d = dynamicsymbols('q1 q2 q3 u1 u2 u3', 1)
u4, u5, f1, f2 = dynamicsymbols('u4, u5, f1, f2')
u4d, u5d = dynamicsymbols('u4, u5', 1)
r, m, g = symbols('r m g')
N = ReferenceFrame('N')
Y = N.orientnew('Y', 'Axis', [q1, N.z])
L = Y.orientnew('L', 'Axis', [q2, Y.x])
R = L.orientnew('R', 'Axis', [q3, L.y])
R.set_ang_vel(N, u1 * L.x + u2 * L.y + u3 * L.z)
R.set_ang_acc(N,
R.ang_vel_in(N).dt(R) + (R.ang_vel_in(N) ^ R.ang_vel_in(N)))
C = Point('C')
C.set_vel(N, u4 * L.x + u5 * (Y.z ^ L.x))
Dmc = C.locatenew('Dmc', r * L.z)
Dmc.v2pt_theory(C, N, R)
Dmc.a2pt_theory(C, N, R)
I = inertia(L, m / 4 * r**2, m / 2 * r**2, m / 4 * r**2)
kd = [q1d - u3 / cos(q2), q2d - u1, q3d - u2 + u3 * tan(q2)]
ForceList = [(Dmc, -m * g * Y.z), (C, f1 * L.x + f2 * (Y.z ^ L.x))]
BodyD = RigidBody('BodyD', Dmc, R, m, (I, Dmc))
BodyList = [BodyD]
KM = Kane(N)
KM.coords([q1, q2, q3])
KM.speeds([u1, u2, u3, u4, u5])
KM.kindiffeq(kd)
(fr, frstar) = KM.kanes_equations(ForceList, BodyList)
fr = fr.subs({u4d: 0, u5d: 0}).subs({u4: 0, u5: 0})
frstar = frstar.subs({u4d: 0, u5d: 0}).subs({u4: 0, u5: 0})
KM2 = Kane(N)
KM2.coords([q1, q2, q3])
KM2.speeds([u1, u2, u3], u_auxiliary=[u4, u5])
KM2.kindiffeq(kd)
(fr2, frstar2) = KM2.kanes_equations(ForceList, BodyList)
fr2 = fr2.subs({u4d: 0, u5d: 0}).subs({u4: 0, u5: 0})
frstar2 = frstar2.subs({u4d: 0, u5d: 0}).subs({u4: 0, u5: 0})
assert fr.expand() == fr2.expand()
assert frstar.expand() == frstar2.expand()
def test_rolling_disc():
# Rolling Disc Example
# Here the rolling disc is formed from the contact point up, removing the
# need to introduce generalized speeds. Only 3 configuration and three
# speed variables are need to describe this system, along with the disc's
# mass and radius, and the local graivty (note that mass will drop out).
q1, q2, q3, u1, u2, u3 = dynamicsymbols('q1 q2 q3 u1 u2 u3')
q1d, q2d, q3d, u1d, u2d, u3d = dynamicsymbols('q1 q2 q3 u1 u2 u3', 1)
r, m, g = symbols('r m g')
# The kinematics are formed by a series of simple rotations. Each simple
# rotation creates a new frame, and the next rotation is defined by the new
# frame's basis vectors. This example uses a 3-1-2 series of rotations, or
# Z, X, Y series of rotations. Angular velocity for this is defined using
# the second frame's basis (the lean frame).
N = ReferenceFrame('N')
Y = N.orientnew('Y', 'Axis', [q1, N.z])
L = Y.orientnew('L', 'Axis', [q2, Y.x])
R = L.orientnew('R', 'Axis', [q3, L.y])
R.set_ang_vel(N, u1 * L.x + u2 * L.y + u3 * L.z)
R.set_ang_acc(N, R.ang_vel_in(N).dt(R) + (R.ang_vel_in(N) ^ R.ang_vel_in(N)))
# This is the translational kinematics. We create a point with no velocity
# in N; this is the contact point between the disc and ground. Next we form
# the position vector from the contact point to the disc mass center.
# Finally we form the velocity and acceleration of the disc.
C = Point('C')
C.set_vel(N, 0)
Dmc = C.locatenew('Dmc', r * L.z)
Dmc.v2pt_theory(C, N, R)
Dmc.a2pt_theory(C, N, R)
# This is a simple way to form the inertia dyadic.
I = inertia(L, m / 4 * r**2, m / 2 * r**2, m / 4 * r**2)
# Kinematic differential equations; how the generalized coordinate time
# derivatives relate to generalized speeds.
kd = [q1d - u3/cos(q3), q2d - u1, q3d - u2 + u3 * tan(q2)]
# Creation of the force list; it is the gravitational force at the mass
# center of the disc. Then we create the disc by assigning a Point to the
# mass center attribute, a ReferenceFrame to the frame attribute, and mass
# and inertia. Then we form the body list.
ForceList = [(Dmc, - m * g * Y.z)]
BodyD = RigidBody()
BodyD.mc = Dmc
BodyD.inertia = (I, Dmc)
BodyD.frame = R
BodyD.mass = m
BodyList = [BodyD]
# Finally we form the equations of motion, using the same steps we did
# before. Specify inertial frame, supply generalized speeds, supply
# kinematic differential equation dictionary, compute Fr from the force
# list and Fr* fromt the body list, compute the mass matrix and forcing
# terms, then solve for the u dots (time derivatives of the generalized
# speeds).
KM = Kane(N)
KM.coords([q1, q2, q3])
KM.speeds([u1, u2, u3])
KM.kindiffeq(kd)
KM.kanes_equations(ForceList, BodyList)
MM = KM.mass_matrix
forcing = KM.forcing
rhs = MM.inv() * forcing
kdd = KM.kindiffdict()
rhs = rhs.subs(kdd)
assert rhs.expand() == Matrix([(10*u2*u3*r - 5*u3**2*r*tan(q2) +
4*g*sin(q2))/(5*r), -2*u1*u3/3, u1*(-2*u2 + u3*tan(q2))]).expand()
