except:
(type, value, tb) = sys.exc_info()
#print("type: %s, value: %s" % (type, value))
compteur += 1
#fcntl.flock(file, fcntl.LOCK_UN)
file.close()
time.sleep(1)
else:
#fcntl.flock(file, fcntl.LOCK_UN)
file.close()
return compositeClientDict, compositeInputDirDict
# Read configuration file
config = ConfigParser()
config.readfp(template.openFile(FULL_MAIN_CONF))
pdsTab = config.get('PDS', 'tab')
# Server redirection if pdsTab is not ON
if pdsTab != 'ON':
URL = "pxCircuitsTab.py\n"
print 'Location: ', URL
results_name = config.get('CIR', 'results_name') # How the "results" file (sent by CIR host) will be named (path not included)
logname = config.get('CS', 'logname') # Full name for the logfile
log_level = config.get('CS', 'log_level') # Level of logging
timeout = int(config.get('CS', 'results_timeout')) # Number of minutes after which the "results" are considered outdated
# If not defined in configuration file, set defaults
if (not logname ):
logname = CS + "/log/" + "CS.log"
def readQueueMax(filename, system):
clientsRegex = {}
directoriesRegex = {}
circuitsRegex = {}
timersRegex = {}
pdsGraphsRegex = {}
pxGraphsRegex = {}
# PDS Default when no entries is present in the maxSettings.conf file
default_client = 200
default_inputDir = 400
default_pdsGraph = 0
# PX Default when no enty is present in the maxSettings.conf file
default_circuit = 800
default_timer = 20
default_pxGraph = 0
file = template.openFile(filename, 0)
lines = file.readlines()
# Parsing
inClients = 0
inInputDirs = 0
inPXCircuits = 0
inPXTimers = 0
inPDSGraphs = 0
inPXGraphs = 0
regex_CLIENTS = re.compile(r'^PDS_CLIENTS\s*')
regex_INPUT_DIRECTORIES = re.compile(r'^PDS_INPUT_DIRECTORIES\s*')
regex_PDS_GRAPHS = re.compile(r'^PDS_GRAPHS\s*')
regex_PX_GRAPHS = re.compile(r'^PX_GRAPHS\s*')
regex_PX_CIRCUITS = re.compile(r'^PX_CIRCUITS\s*')
regex_PX_TIMERS = re.compile(r'^PX_TIMERS\s*')
regex_DEFAULT = re.compile(r'^DEFAULT\s+(\d+).*')
regex_NameValue = re.compile(r'^(.*?)\s+(\d+).*')
for line in lines:
match_CLIENTS = regex_CLIENTS.match(line)
match_INPUT_DIRECTORIES = regex_INPUT_DIRECTORIES.match(line)
match_PDS_GRAPHS = regex_PDS_GRAPHS.match(line)
match_PX_GRAPHS = regex_PX_GRAPHS.match(line)
match_PX_CIRCUITS = regex_PX_CIRCUITS.match(line)
match_PX_TIMERS = regex_PX_TIMERS.match(line)
match_DEFAULT = regex_DEFAULT.match(line)
match_NameValue = regex_NameValue.match(line)
if line[0] == "#":
continue
elif match_CLIENTS:
if DEBUG: print "Les Clients"
inClients = 1
(inInputDirs, inPXCircuits, inPXTimers, inPDSGraphs,
inPXGraphs) = (0, 0, 0, 0, 0)
elif match_INPUT_DIRECTORIES:
if DEBUG: print "Les Directories"
inInputDirs = 1
(inClients, inPXCircuits, inPXTimers, inPDSGraphs,
inPXGraphs) = (0, 0, 0, 0, 0)
elif match_PDS_GRAPHS:
if DEBUG: print "Les Graphs PDS"
inPDSGraphs = 1
(inClients, inInputDirs, inPXCircuits, inPXTimers,
inPXGraphs) = (0, 0, 0, 0, 0)
elif match_PX_GRAPHS:
if DEBUG: print "Les Graphs PX"
inPXGraphs = 1
(inClients, inInputDirs, inPXCircuits, inPXTimers,
inPDSGraphs) = (0, 0, 0, 0, 0)
elif match_PX_CIRCUITS:
if DEBUG: print "Les Circuits"
inPXCircuits = 1
(inClients, inInputDirs, inPXTimers, inPDSGraphs,
inPXGraphs) = (0, 0, 0, 0, 0)
elif match_PX_TIMERS:
if DEBUG: print "Les Timers"
inPXTimers = 1
(inClients, inInputDirs, inPXCircuits, inPDSGraphs,
inPXGraphs) = (0, 0, 0, 0, 0)
elif inClients:
if (match_DEFAULT):
default_client = match_DEFAULT.group(1)
elif (match_NameValue):
(name, number) = match_NameValue.groups()
clientsRegex[glob_to_regex(name)] = number
if DEBUG:
print "client ",
print match_NameValue.groups()
elif inInputDirs:
if (match_DEFAULT):
default_inputDir = match_DEFAULT.group(1)
elif (match_NameValue):
(name, number) = match_NameValue.groups()
directoriesRegex[glob_to_regex(name)] = number
if DEBUG:
print "inputDir ",
print match_NameValue.groups()
elif inPDSGraphs:
if (match_DEFAULT):
default_pdsGraph = match_DEFAULT.group(1)
elif (match_NameValue):
(name, number) = match_NameValue.groups()
pdsGraphsRegex[glob_to_regex(name)] = number
if DEBUG:
print "PDS graph ",
print match_NameValue.groups()
elif inPXGraphs:
if (match_DEFAULT):
default_pxGraph = match_DEFAULT.group(1)
elif (match_NameValue):
(name, number) = match_NameValue.groups()
pxGraphsRegex[glob_to_regex(name)] = number
if DEBUG:
print "PX graph ",
print match_NameValue.groups()
elif inPXCircuits:
if (match_DEFAULT):
default_circuit = match_DEFAULT.group(1)
elif (match_NameValue):
(name, number) = match_NameValue.groups()
circuitsRegex[glob_to_regex(name)] = number
if DEBUG:
print "circuit",
print match_NameValue.groups()
elif inPXTimers:
if (match_DEFAULT):
default_timer = match_DEFAULT.group(1)
elif (match_NameValue):
(name, number) = match_NameValue.groups()
timersRegex[glob_to_regex(name)] = number
if DEBUG:
print "timer",
print match_NameValue.groups()
if system == 'PDS':
return clientsRegex, default_client, directoriesRegex, default_inputDir, pdsGraphsRegex, default_pdsGraph
elif system == 'PX':
return circuitsRegex, default_circuit, timersRegex, default_timer, pxGraphsRegex, default_pxGraph
compositeClientDict = pickle.load(file)
compositeInputDirDict = pickle.load(file)
file.close()
return compositeClientDict, compositeInputDirDict
def unarchiveListing(filename):
file = open(filename, "rb")
listingDict = pickle.load(file)
file.close()
return listingDict
# Read configuration file
config = ConfigParser()
config.readfp(template.openFile(FULL_MAIN_CONF))
results_name = config.get(
'CIR',
'results_name') # How the "results" file will be named (path not included)
logname = config.get('CS', 'logname') # Full name for the logfile
log_level = config.get('CS', 'log_level') # Level of logging
host = config.get(
'CCS',
'host') # Where the program to create a client listing must be initiated
timeout = int(
config.get('CS', 'results_timeout')
) # Number of minutes after which the "results" are considered outdated
# If not defined in configuration file, set defaults
if (not logname):
logname = CS + "/log/" + "CS.log"
def readQueueMax(filename, system):
clientsRegex = {}
directoriesRegex = {}
circuitsRegex = {}
timersRegex = {}
pdsGraphsRegex = {}
pxGraphsRegex = {}
# PDS Default when no entries is present in the maxSettings.conf file
default_client = 200
default_inputDir = 400
default_pdsGraph = 0
# PX Default when no enty is present in the maxSettings.conf file
default_circuit = 800
default_timer = 20
default_pxGraph = 0
file = template.openFile(filename, 0)
lines = file.readlines()
# Parsing
inClients = 0
inInputDirs = 0
inPXCircuits = 0
inPXTimers = 0
inPDSGraphs = 0
inPXGraphs = 0
regex_CLIENTS = re.compile(r'^PDS_CLIENTS\s*')
regex_INPUT_DIRECTORIES = re.compile(r'^PDS_INPUT_DIRECTORIES\s*')
regex_PDS_GRAPHS = re.compile(r'^PDS_GRAPHS\s*')
regex_PX_GRAPHS = re.compile(r'^PX_GRAPHS\s*')
regex_PX_CIRCUITS = re.compile(r'^PX_CIRCUITS\s*')
regex_PX_TIMERS = re.compile(r'^PX_TIMERS\s*')
regex_DEFAULT = re.compile(r'^DEFAULT\s+(\d+).*')
regex_NameValue = re.compile(r'^(.*?)\s+(\d+).*')
for line in lines:
match_CLIENTS = regex_CLIENTS.match(line)
match_INPUT_DIRECTORIES = regex_INPUT_DIRECTORIES.match(line)
match_PDS_GRAPHS = regex_PDS_GRAPHS.match(line)
match_PX_GRAPHS = regex_PX_GRAPHS.match(line)
match_PX_CIRCUITS = regex_PX_CIRCUITS.match(line)
match_PX_TIMERS = regex_PX_TIMERS.match(line)
match_DEFAULT = regex_DEFAULT.match(line)
match_NameValue = regex_NameValue.match(line)
if line[0] == "#":
continue
elif match_CLIENTS:
if DEBUG: print "Les Clients"
inClients = 1
(inInputDirs, inPXCircuits, inPXTimers, inPDSGraphs, inPXGraphs) = (0, 0, 0, 0, 0)
elif match_INPUT_DIRECTORIES:
if DEBUG: print "Les Directories"
inInputDirs = 1
(inClients, inPXCircuits, inPXTimers, inPDSGraphs, inPXGraphs) = (0, 0, 0, 0, 0)
elif match_PDS_GRAPHS:
if DEBUG: print "Les Graphs PDS"
inPDSGraphs = 1
(inClients, inInputDirs, inPXCircuits, inPXTimers, inPXGraphs) = (0, 0, 0, 0, 0)
elif match_PX_GRAPHS:
if DEBUG: print "Les Graphs PX"
inPXGraphs = 1
(inClients, inInputDirs, inPXCircuits, inPXTimers, inPDSGraphs) = (0, 0, 0, 0, 0)
elif match_PX_CIRCUITS:
if DEBUG: print "Les Circuits"
inPXCircuits = 1
(inClients, inInputDirs, inPXTimers, inPDSGraphs, inPXGraphs) = (0, 0, 0, 0, 0)
elif match_PX_TIMERS:
if DEBUG: print "Les Timers"
inPXTimers = 1
(inClients, inInputDirs, inPXCircuits, inPDSGraphs, inPXGraphs) = (0, 0, 0, 0, 0)
elif inClients:
if (match_DEFAULT):
default_client = match_DEFAULT.group(1)
elif (match_NameValue):
(name, number) = match_NameValue.groups()
clientsRegex[glob_to_regex(name)] = number
if DEBUG:
print "client ",
print match_NameValue.groups()
elif inInputDirs:
if (match_DEFAULT):
default_inputDir = match_DEFAULT.group(1)
elif (match_NameValue):
(name, number) = match_NameValue.groups()
directoriesRegex[glob_to_regex(name)] = number
if DEBUG:
print "inputDir ",
print match_NameValue.groups()
elif inPDSGraphs:
if (match_DEFAULT):
default_pdsGraph = match_DEFAULT.group(1)
elif (match_NameValue):
(name, number) = match_NameValue.groups()
pdsGraphsRegex[glob_to_regex(name)] = number
if DEBUG:
print "PDS graph ",
print match_NameValue.groups()
elif inPXGraphs:
if (match_DEFAULT):
default_pxGraph = match_DEFAULT.group(1)
elif (match_NameValue):
(name, number) = match_NameValue.groups()
pxGraphsRegex[glob_to_regex(name)] = number
if DEBUG:
print "PX graph ",
print match_NameValue.groups()
elif inPXCircuits:
if (match_DEFAULT):
default_circuit = match_DEFAULT.group(1)
elif (match_NameValue):
(name, number) = match_NameValue.groups()
circuitsRegex[glob_to_regex(name)] = number
if DEBUG:
print "circuit",
print match_NameValue.groups()
elif inPXTimers:
if (match_DEFAULT):
default_timer = match_DEFAULT.group(1)
elif (match_NameValue):
(name, number) = match_NameValue.groups()
timersRegex[glob_to_regex(name)] = number
if DEBUG:
print "timer",
print match_NameValue.groups()
if system == 'PDS':
return clientsRegex, default_client, directoriesRegex, default_inputDir, pdsGraphsRegex, default_pdsGraph
elif system == 'PX':
return circuitsRegex, default_circuit, timersRegex, default_timer, pxGraphsRegex, default_pxGraph
