def CustomConfig(self, panel, sizer=None, irow=0):
"""config panel for left-hand-side of frame"""
labstyle = wx.ALIGN_LEFT|wx.LEFT|wx.TOP|wx.EXPAND
if self.lasso_callback is None:
zoom_opts = ('Zoom to Rectangle',
'Show Line Profile')
else:
zoom_opts = ('Zoom to Rectangle',
'Pick Area for XRF Spectrum',
'Show Line Profile')
cpanel = wx.Panel(panel)
if sizer is None:
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(SimpleText(cpanel, label='Cursor Modes', style=labstyle),
0, labstyle, 3)
self.zoom_mode = wx.RadioBox(cpanel, -1, "",
wx.DefaultPosition, wx.DefaultSize,
zoom_opts, 1, wx.RA_SPECIFY_COLS)
self.zoom_mode.Bind(wx.EVT_RADIOBOX, self.onCursorMode)
sizer.Add(self.zoom_mode, 1, labstyle, 4)
if self.save_callback is not None:
sizer.Add(SimpleText(cpanel, label='Save Position:', style=labstyle),
0, labstyle, 3)
self.pos_name = wx.TextCtrl(cpanel, -1, '', size=(155, -1),
style=wx.TE_PROCESS_ENTER)
self.pos_name.Bind(wx.EVT_TEXT_ENTER, self.onSavePixel)
sizer.Add(self.pos_name, 0, labstyle, 3)
pack(cpanel, sizer)
return cpanel
def createMainPanel(self):
epicspanel = self.createEpicsPanel()
ctrlpanel = self.createControlPanel()
plotpanel = self.panel = self.createPlotPanel()
self.panel.SetName('plotpanel')
tx, ty = self.wids['ptable'].GetBestSize()
cx, cy = ctrlpanel.GetBestSize()
px, py = plotpanel.GetBestSize()
self.SetSize((950, 625))
self.SetMinSize((450, 350))
style = wx.ALIGN_LEFT | wx.EXPAND | wx.ALL
bsizer = wx.BoxSizer(wx.HORIZONTAL)
bsizer.Add(ctrlpanel, 0, style, 1)
bsizer.Add(plotpanel, 1, style, 1)
hline = wx.StaticLine(self,
size=(425, 2),
style=wx.LI_HORIZONTAL | style)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(epicspanel, 0, style, 1)
sizer.Add(hline, 0, style, 1)
sizer.Add(bsizer, 1, style, 1)
pack(self, sizer)
self.set_roilist(mca=None)
def createSearchPanel(self):
searchpanel = wx.Panel(self, name='Search Panel')
labstyle = wx.ALIGN_LEFT|wx.ALIGN_BOTTOM|wx.EXPAND
ctrlstyle = wx.ALIGN_LEFT|wx.ALIGN_BOTTOM
txtstyle=wx.ALIGN_LEFT|wx.ST_NO_AUTORESIZE|wx.TE_PROCESS_ENTER
Font9 = Font(9)
Font10 = Font(10)
Font11 = Font(11)
plttitle = txt(searchpanel, 'XRD Reference Data', font=Font11, size=200)
loadpanel = wx.Panel(searchpanel, name='LoadPanel')
lsizer = wx.BoxSizer(wx.HORIZONTAL)
l1 = Button(loadpanel, 'Search Database', size=(120, 30), action=self.onSearchDB)
l2 = Button(loadpanel, 'Load CIF', size=(120, 30), action=self.onLoadCIF)
lsizer.Add(l1, 0, wx.EXPAND|wx.ALL, 0)
lsizer.Add(l2, 0, wx.EXPAND|wx.ALL, 0)
pack(loadpanel, lsizer)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(plttitle, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL)
sizer.Add(lin(searchpanel, 195), 0, labstyle)
sizer.Add(loadpanel, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL)
sizer.Add(lin(searchpanel, 195), 0, labstyle)
sizer.Add(lin(searchpanel, 195), 0, labstyle)
pack(searchpanel, sizer)
return searchpanel
def createMainPanel(self):
epicspanel = self.createEpicsPanel()
ctrlpanel = self.createControlPanel()
plotpanel = self.panel = self.createPlotPanel()
self.panel.SetName('plotpanel')
tx, ty = self.wids['ptable'].GetBestSize()
cx, cy = ctrlpanel.GetBestSize()
px, py = plotpanel.GetBestSize()
self.SetSize((950, 625))
self.SetMinSize((450, 350))
style = wx.ALIGN_LEFT|wx.EXPAND|wx.ALL
bsizer = wx.BoxSizer(wx.HORIZONTAL)
bsizer.Add(ctrlpanel, 0, style, 1)
bsizer.Add(plotpanel, 1, style, 1)
hline = wx.StaticLine(self, size=(425, 2), style=wx.LI_HORIZONTAL|style)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(epicspanel, 0, style, 1)
sizer.Add(hline, 0, style, 1)
sizer.Add(bsizer, 1, style, 1)
pack(self, sizer)
self.set_roilist(mca=None)
def CustomConfig(self, panel, sizer=None, irow=0):
"""config panel for left-hand-side of frame"""
labstyle = wx.ALIGN_LEFT|wx.LEFT|wx.TOP|wx.EXPAND
if self.lasso_callback is None:
zoom_opts = ('Zoom to Rectangle',)
else:
zoom_opts = ('Zoom to Rectangle',
'Pick Area for XRF Spectrum')
cpanel = wx.Panel(panel)
if sizer is None:
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(SimpleText(cpanel, label='Cursor Modes', style=labstyle),
0, labstyle, 3)
self.zoom_mode = wx.RadioBox(cpanel, -1, "",
wx.DefaultPosition, wx.DefaultSize,
zoom_opts, 1, wx.RA_SPECIFY_COLS)
self.zoom_mode.Bind(wx.EVT_RADIOBOX, self.onCursorMode)
sizer.Add(self.zoom_mode, 1, labstyle, 4)
if self.save_callback is not None:
sizer.Add(SimpleText(cpanel, label='Save Position:', style=labstyle),
0, labstyle, 3)
self.pos_name = wx.TextCtrl(cpanel, -1, '', size=(155, -1),
style=wx.TE_PROCESS_ENTER)
self.pos_name.Bind(wx.EVT_TEXT_ENTER, self.onSavePixel)
sizer.Add(self.pos_name, 0, labstyle, 3)
pack(cpanel, sizer)
return cpanel
def createMainPanel(self):
panel = wx.Panel(self)
sizer = wx.GridBagSizer(5, 4)
lab_roi = SimpleText(panel, ' Element / ROI Name')
lab_out = SimpleText(panel, ' Output Folder:')
lab_bad = SimpleText(panel, ' Bad Channels:')
lab_sel = SimpleText(panel, ' Select Files:')
self.roi_wid = wx.TextCtrl(panel, -1, '', size=(200, -1))
self.dir_wid = wx.TextCtrl(panel, -1, 'DT_Corrected', size=(200, -1))
self.badchans_wid = wx.TextCtrl(panel, -1, ' ', size=(200, -1))
self.sel_wid = Button(panel, 'Browse', size=(100, -1),
action=self.onBrowse)
ir = 0
sizer.Add(lab_roi, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.roi_wid, (ir, 1), (1, 1), LCEN, 2)
ir += 1
sizer.Add(lab_out, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.dir_wid, (ir, 1), (1, 1), LCEN, 2)
ir += 1
sizer.Add(lab_bad, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.badchans_wid, (ir, 1), (1, 1), LCEN, 2)
ir += 1
sizer.Add(lab_sel, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.sel_wid, (ir, 1), (1, 1), LCEN, 2)
pack(panel, sizer)
wx.CallAfter(self.init_larch)
return
def create_detbuttons(self, pane):
btnpanel = wx.Panel(pane, name='buttons')
btnsizer = wx.GridBagSizer(1, 1)
btns = {}
sx = 30
sy = int(sx / 2)
for i in range(1, self.nmca + 1):
b = Button(btnpanel,
'%d' % i,
size=(sx, sx),
action=partial(self.onSelectDet, index=i))
b.SetFont(Font(10))
self.wids['det%i' % i] = b
btns[i] = b
dtype = self.det_type.lower().replace('-',
'').replace(' ',
'').replace('_', '')
if dtype.startswith('sxd7') and self.nmca == 7:
btnsizer.Add((sx, sy), (0, 0), (1, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add(btns[4], (1, 0), (2, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add(btns[5], (3, 0), (2, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add((sx, sy), (5, 0), (1, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add(btns[3], (0, 2), (2, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add(btns[7], (2, 2), (2, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add(btns[6], (4, 2), (2, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add((sx, sy), (0, 4), (1, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add(btns[2], (1, 4), (2, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add(btns[1], (3, 4), (2, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add((sx, sy), (5, 4), (1, 2), wx.ALIGN_LEFT, 1)
elif dtype.startswith('me7') and self.nmca == 7:
btnsizer.Add((sx, sy), (0, 0), (1, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add(btns[7], (1, 0), (2, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add(btns[6], (3, 0), (2, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add((sx, sy), (5, 0), (1, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add(btns[2], (0, 2), (2, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add(btns[1], (2, 2), (2, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add(btns[5], (4, 2), (2, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add((sx, sy), (0, 4), (1, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add(btns[3], (1, 4), (2, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add(btns[4], (3, 4), (2, 2), wx.ALIGN_LEFT, 1)
btnsizer.Add((sx, sy), (5, 4), (1, 2), wx.ALIGN_LEFT, 1)
elif dtype.startswith('me4') and self.nmca == 4:
btnsizer.Add(btns[1], (0, 0), (1, 1), wx.ALIGN_LEFT, 1)
btnsizer.Add(btns[2], (1, 0), (1, 1), wx.ALIGN_LEFT, 1)
btnsizer.Add(btns[3], (1, 1), (1, 1), wx.ALIGN_LEFT, 1)
btnsizer.Add(btns[4], (0, 1), (1, 1), wx.ALIGN_LEFT, 1)
else:
NPERROW = 4
icol, irow = 0, 0
for nmca in range(1, self.nmca + 1):
btnsizer.Add(btns[nmca], (irow, icol), (1, 1), wx.ALIGN_LEFT,
1)
icol += 1
if icol > NPERROW - 1:
icol = 0
irow += 1
pack(btnpanel, btnsizer)
return btnpanel
def createBkgdPanel(self):
bkgdpanel = wx.Panel(self, name='Background Panel')
labstyle = wx.ALIGN_LEFT|wx.ALIGN_BOTTOM|wx.EXPAND
ctrlstyle = wx.ALIGN_LEFT|wx.ALIGN_BOTTOM
txtstyle=wx.ALIGN_LEFT|wx.ST_NO_AUTORESIZE|wx.TE_PROCESS_ENTER
Font9 = Font(9)
Font10 = Font(10)
Font11 = Font(11)
plttitle = txt(bkgdpanel, 'Background Options', font=Font11, size=200)
l1 = Check(bkgdpanel, 'Show background', action=self.onShowBkgd, default=False)
l2 = Button(bkgdpanel, 'Subtract background', size=(90, 30), action=self.onSubBkgd)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(plttitle, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL)
sizer.Add(lin(bkgdpanel, 195), 0, labstyle)
sizer.Add(l1, 0, wx.EXPAND|wx.ALL, 0)
sizer.Add(l2, 0, wx.EXPAND|wx.ALL, 0)
sizer.Add(lin(bkgdpanel, 195), 0, labstyle)
sizer.Add(lin(bkgdpanel, 195), 0, labstyle)
pack(bkgdpanel, sizer)
return bkgdpanel
def __init__(self, parent, param, size=(80, -1), precision=4, **kws):
self.param = param
self.precision = precision
wx.Panel.__init__(self, parent, -1)
self.wids = Empty()
self.wids.conf = wx.BitmapButton(self, -1, infoicon.GetBitmap(),
size=(24, 24))
self.wids.conf.Bind(wx.EVT_BUTTON, self.onConfigure)
self.wids.conf.SetToolTip(wx.ToolTip("Configure Parameter"))
self.wids.val = FloatCtrl(self, value=param.value,
minval=param.min, maxval=param.max,
precision=precision, size=size)
self.wids.vary = Choice(self, choices=VARY_CHOICES,
action=self.onVaryChoice, size=(80, -1))
vary_choice = 0
if param.vary:
vary_choice = 1
elif param.expr is not None:
vary_choice = 2
self.wids.vary.SetSelection(vary_choice)
sizer = wx.BoxSizer(wx.HORIZONTAL)
sizer.Add(self.wids.val, 0, LEFT|wx.TOP)
sizer.Add(self.wids.vary, 0, LEFT|wx.TOP|wx.ALL)
sizer.Add(self.wids.conf, 0, LEFT)
pack(self, sizer)
def createMainPanel(self):
panel = wx.Panel(self)
sizer = wx.GridBagSizer(5, 4)
lab_roi = SimpleText(panel, ' Element / ROI Name')
lab_out = SimpleText(panel, ' Output Folder:')
lab_bad = SimpleText(panel, ' Bad Channels:')
lab_sel = SimpleText(panel, ' Select Files:')
self.roi_wid = wx.TextCtrl(panel, -1, '', size=(200, -1))
self.dir_wid = wx.TextCtrl(panel, -1, 'DT_Corrected', size=(200, -1))
self.badchans_wid = wx.TextCtrl(panel, -1, ' ', size=(200, -1))
self.sel_wid = Button(panel,
'Browse',
size=(100, -1),
action=self.onBrowse)
ir = 0
sizer.Add(lab_roi, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.roi_wid, (ir, 1), (1, 1), LCEN, 2)
ir += 1
sizer.Add(lab_out, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.dir_wid, (ir, 1), (1, 1), LCEN, 2)
ir += 1
sizer.Add(lab_bad, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.badchans_wid, (ir, 1), (1, 1), LCEN, 2)
ir += 1
sizer.Add(lab_sel, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.sel_wid, (ir, 1), (1, 1), LCEN, 2)
pack(panel, sizer)
wx.CallAfter(self.init_larch)
return
def createBkgdPanel(self):
bkgdpanel = wx.Panel(self, name='Background Panel')
labstyle = wx.ALIGN_LEFT|wx.ALIGN_BOTTOM|wx.EXPAND
ctrlstyle = wx.ALIGN_LEFT|wx.ALIGN_BOTTOM
txtstyle=wx.ALIGN_LEFT|wx.ST_NO_AUTORESIZE|wx.TE_PROCESS_ENTER
Font9 = Font(9)
Font10 = Font(10)
Font11 = Font(11)
plttitle = txt(bkgdpanel, 'Background Options', font=Font11, size=200)
l1 = Check(bkgdpanel, 'Show background', action=self.onShowBkgd, default=False)
l2 = Button(bkgdpanel, 'Subtract background', size=(90, 30), action=self.onSubBkgd)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(plttitle, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL)
sizer.Add(lin(bkgdpanel, 195), 0, labstyle)
sizer.Add(l1, 0, wx.EXPAND|wx.ALL, 0)
sizer.Add(l2, 0, wx.EXPAND|wx.ALL, 0)
sizer.Add(lin(bkgdpanel, 195), 0, labstyle)
sizer.Add(lin(bkgdpanel, 195), 0, labstyle)
pack(bkgdpanel, sizer)
return bkgdpanel
def createSearchPanel(self):
searchpanel = wx.Panel(self, name='Search Panel')
labstyle = wx.ALIGN_LEFT|wx.ALIGN_BOTTOM|wx.EXPAND
ctrlstyle = wx.ALIGN_LEFT|wx.ALIGN_BOTTOM
txtstyle=wx.ALIGN_LEFT|wx.ST_NO_AUTORESIZE|wx.TE_PROCESS_ENTER
Font9 = Font(9)
Font10 = Font(10)
Font11 = Font(11)
plttitle = txt(searchpanel, 'XRD Reference Data', font=Font11, size=200)
loadpanel = wx.Panel(searchpanel, name='LoadPanel')
lsizer = wx.BoxSizer(wx.HORIZONTAL)
l1 = Button(loadpanel, 'Search Database', size=(120, 30), action=self.onSearchDB)
l2 = Button(loadpanel, 'Load CIF', size=(120, 30), action=self.onLoadCIF)
lsizer.Add(l1, 0, wx.EXPAND|wx.ALL, 0)
lsizer.Add(l2, 0, wx.EXPAND|wx.ALL, 0)
pack(loadpanel, lsizer)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(plttitle, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL)
sizer.Add(lin(searchpanel, 195), 0, labstyle)
sizer.Add(loadpanel, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL)
sizer.Add(lin(searchpanel, 195), 0, labstyle)
sizer.Add(lin(searchpanel, 195), 0, labstyle)
pack(searchpanel, sizer)
return searchpanel
def CustomConfig(self, panel, sizer=None, irow=0):
"""config panel for left-hand-side of frame"""
labstyle = wx.ALIGN_LEFT | wx.LEFT | wx.TOP | wx.EXPAND
if self.lasso_callback is None:
zoom_opts = ('Zoom to Rectangle', 'Show Line Profile')
else:
zoom_opts = ('Zoom to Rectangle', 'Pick Area for XRF Spectrum',
'Show Line Profile')
if self.wxmplot_version > 0.921:
cpanel = wx.Panel(panel)
if sizer is None:
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(SimpleText(cpanel, label='Cursor Modes', style=labstyle),
0, labstyle, 3)
self.zoom_mode = wx.RadioBox(cpanel, -1, "", wx.DefaultPosition,
wx.DefaultSize, zoom_opts, 1,
wx.RA_SPECIFY_COLS)
self.zoom_mode.Bind(wx.EVT_RADIOBOX, self.onCursorMode)
sizer.Add(self.zoom_mode, 1, labstyle, 4)
if self.save_callback is not None:
sizer.Add(
SimpleText(cpanel, label='Save Position:', style=labstyle),
0, labstyle, 3)
self.pos_name = wx.TextCtrl(cpanel,
-1,
'',
size=(155, -1),
style=wx.TE_PROCESS_ENTER)
self.pos_name.Bind(wx.EVT_TEXT_ENTER, self.onSavePixel)
sizer.Add(self.pos_name, 0, labstyle, 3)
pack(cpanel, sizer)
return cpanel
else: # support older versions of wxmplot, will be able to deprecate
conf = self.panel.conf
lpanel = panel
lsizer = sizer
self.zoom_mode = wx.RadioBox(panel, -1, "Cursor Mode:",
wx.DefaultPosition, wx.DefaultSize,
zoom_opts, 1, wx.RA_SPECIFY_COLS)
self.zoom_mode.Bind(wx.EVT_RADIOBOX, self.onCursorMode)
sizer.Add(self.zoom_mode, (irow, 0), (1, 4), labstyle, 3)
if self.save_callback is not None:
self.pos_name = wx.TextCtrl(panel,
-1,
'',
size=(175, -1),
style=wx.TE_PROCESS_ENTER)
self.pos_name.Bind(wx.EVT_TEXT_ENTER, self.onSavePixel)
label = SimpleText(panel,
label='Save Position:',
size=(-1, -1))
sizer.Add(label, (irow + 1, 0), (1, 2), labstyle, 3)
sizer.Add(self.pos_name, (irow + 1, 2), (1, 2), labstyle, 3)
def __init__(self, parent, group, on_ok=None):
self.group = group
self.on_ok = on_ok
wx.Frame.__init__(self,
None,
-1,
'Edit Array Names',
style=wx.DEFAULT_FRAME_STYLE | wx.TAB_TRAVERSAL)
self.SetFont(Font(10))
sizer = wx.GridBagSizer(4, 4)
self.SetMinSize((600, 600))
self.wids = {}
cind = SimpleText(self, label='Column')
cold = SimpleText(self, label='Current Name')
cnew = SimpleText(self, label='Enter New Name')
cret = SimpleText(self, label=' Result ', size=(150, -1))
cinfo = SimpleText(self, label=' Data Range')
ir = 0
sizer.Add(cind, (ir, 0), (1, 1), LCEN, 3)
sizer.Add(cold, (ir, 1), (1, 1), LCEN, 3)
sizer.Add(cnew, (ir, 2), (1, 1), LCEN, 3)
sizer.Add(cret, (ir, 3), (1, 1), LCEN, 3)
sizer.Add(cinfo, (ir, 4), (1, 1), LCEN, 3)
for i, name in enumerate(group.array_labels):
ir += 1
cind = SimpleText(self, label=' %i ' % (i + 1))
cold = SimpleText(self, label=' %s ' % name)
cret = SimpleText(self, label=fix_varname(name), size=(150, -1))
cnew = wx.TextCtrl(self, value=name, size=(150, -1))
cnew.Bind(wx.EVT_KILL_FOCUS, partial(self.update, index=i))
cnew.Bind(wx.EVT_CHAR, partial(self.update_char, index=i))
cnew.Bind(wx.EVT_TEXT_ENTER, partial(self.update, index=i))
# cnew.Bind(wx.EVT_TEXT, partial(self.update3, index=i))
arr = group.data[i, :]
info_str = " [ %8g : %8g ] " % (arr.min(), arr.max())
cinfo = SimpleText(self, label=info_str)
self.wids[i] = cnew
self.wids["ret_%i" % i] = cret
sizer.Add(cind, (ir, 0), (1, 1), LCEN, 3)
sizer.Add(cold, (ir, 1), (1, 1), LCEN, 3)
sizer.Add(cnew, (ir, 2), (1, 1), LCEN, 3)
sizer.Add(cret, (ir, 3), (1, 1), LCEN, 3)
sizer.Add(cinfo, (ir, 4), (1, 1), LCEN, 3)
sizer.Add(Button(self, 'OK', action=self.onOK), (ir + 1, 1), (1, 2),
LCEN, 3)
pack(self, sizer)
self.Show()
self.Raise()
def CreateXASPanel(self, parent):
p = panel = wx.Panel(parent)
self.xas_autoe0 = Check(panel, default=True, label='auto?')
self.xas_showe0 = Check(panel, default=True, label='show?')
self.xas_autostep = Check(panel, default=True, label='auto?')
self.xas_op = Choice(panel, size=(225, -1),
choices=('Raw Data', 'Normalized',
'Derivative',
'Normalized + Derivative',
'Pre-edge subtracted',
'Raw Data With Pre-edge/Post-edge Curves'),
action=self.onXASChoice)
opts = {'size': (95, -1), 'precision': 3} # , 'action': self.onXASChoice}
self.xas_e0 = FloatCtrl(panel, value = 0, **opts)
self.xas_step = FloatCtrl(panel, value = 0, **opts)
opts['precision'] = 1
self.xas_pre1 = FloatCtrl(panel, value=-200, **opts)
self.xas_pre2 = FloatCtrl(panel, value= -30, **opts)
self.xas_nor1 = FloatCtrl(panel, value= 50, **opts)
self.xas_nor2 = FloatCtrl(panel, value= -50, **opts)
opts = {'size': (50, -1), 'choices': ('0', '1', '2', '3'),
'action': self.onXASChoice}
self.xas_vict = Choice(panel, **opts)
self.xas_nnor = Choice(panel, **opts)
self.xas_vict.SetSelection(1)
self.xas_nnor.SetSelection(2)
sizer = wx.GridBagSizer(10, 4)
sizer.Add(SimpleText(p, 'Plot XAS as: '), (0, 0), (1, 1), LCEN)
sizer.Add(SimpleText(p, 'E0 : '), (1, 0), (1, 1), LCEN)
sizer.Add(SimpleText(p, 'Edge Step: '), (2, 0), (1, 1), LCEN)
sizer.Add(SimpleText(p, 'Pre-edge range: '), (3, 0), (1, 1), LCEN)
sizer.Add(SimpleText(p, 'Normalization range: '), (4, 0), (1, 1), LCEN)
sizer.Add(self.xas_op, (0, 1), (1, 3), LCEN)
sizer.Add(self.xas_e0, (1, 1), (1, 1), LCEN)
sizer.Add(self.xas_step, (2, 1), (1, 1), LCEN)
sizer.Add(self.xas_pre1, (3, 1), (1, 1), LCEN)
sizer.Add(SimpleText(p, ':'), (3, 2), (1, 1), LCEN)
sizer.Add(self.xas_pre2, (3, 3), (1, 1), LCEN)
sizer.Add(self.xas_nor1, (4, 1), (1, 1), LCEN)
sizer.Add(SimpleText(p, ':'), (4, 2), (1, 1), LCEN)
sizer.Add(self.xas_nor2, (4, 3), (1, 1), LCEN)
sizer.Add(self.xas_autoe0, (1, 2), (1, 2), LCEN)
sizer.Add(self.xas_showe0, (1, 4), (1, 2), LCEN)
sizer.Add(self.xas_autostep, (2, 2), (1, 2), LCEN)
sizer.Add(SimpleText(p, 'Victoreen:'), (3, 4), (1, 1), LCEN)
sizer.Add(self.xas_vict, (3, 5), (1, 1), LCEN)
sizer.Add(SimpleText(p, 'PolyOrder:'), (4, 4), (1, 1), LCEN)
sizer.Add(self.xas_nnor, (4, 5), (1, 1), LCEN)
pack(panel, sizer)
return panel
def onFileList(self, event=None):
frame = wx.Frame(self)
edlist = FileCheckList(frame, select_action=self.onFileListSelect)
for i in range(8):
edlist.Append("File.%3.3d" % (i + 1))
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(edlist, 1, wx.EXPAND | wx.ALL, 5)
pack(frame, sizer)
frame.Show()
frame.Raise()
def onFileList(self, event=None):
frame = wx.Frame(self)
edlist = FileCheckList(frame, select_action=self.onFileListSelect)
for i in range(8):
edlist.Append("File.%3.3d" % (i+1))
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(edlist, 1, wx.EXPAND|wx.ALL, 5)
pack(frame, sizer)
frame.Show()
frame.Raise()
def onEdList(self, event=None):
frame = wx.Frame(self)
edlist = EditableListBox(frame, self.onEdListSelect)
edlist.Append(" Item 1 ")
edlist.Append(" Item 2 ")
edlist.Append(" Next ")
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(edlist, 1, wx.EXPAND | wx.ALL, 5)
pack(frame, sizer)
frame.Show()
frame.Raise()
def onEdList(self, event=None):
frame = wx.Frame(self)
edlist = EditableListBox(frame, self.onEdListSelect)
edlist.Append(" Item 1 ")
edlist.Append(" Item 2 ")
edlist.Append(" Next ")
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(edlist, 1, wx.EXPAND|wx.ALL, 5)
pack(frame, sizer)
frame.Show()
frame.Raise()
def __init__(self, parent, size=(675, 525)):
self.parent = parent
self.larch = parent.larch
self.mca = parent.mca
conf = parent.conf
self.paramgroup = Group()
if not hasattr(self.mca, 'init_calib'):
xrf_calib_fitrois(self.mca, _larch=self.larch)
wx.Frame.__init__(self,
parent,
-1,
'Fit XRF Spectra',
size=size,
style=wx.DEFAULT_FRAME_STYLE)
if not hasattr(self.parent, 'filters_data'):
self.parent.filters_data = read_filterdata(self.Filter_Materials,
_larch=self.larch)
self.wids = Empty()
self.SetFont(Font(9))
self.panels = {}
self.nb = flat_nb.FlatNotebook(self, wx.ID_ANY, agwStyle=FNB_STYLE)
self.nb.SetBackgroundColour('#FBFBF8')
self.SetBackgroundColour('#F6F6F0')
self.nb.AddPage(self.settings_page(), 'Fit & Background Settings')
self.nb.AddPage(self.filters_page(), 'Filters and Attenuation')
self.nb.AddPage(self.fitpeaks_page(), 'XRF Peaks')
self.nb.SetSelection(0)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(self.nb, 1, wx.ALL | wx.EXPAND)
sizer.Add((5, 5))
sizer.Add(HLine(self, size=(675, 3)), 0, CEN | LEFT | wx.TOP | wx.GROW)
sizer.Add((5, 5))
bpanel = RowPanel(self)
bpanel.Add(Button(bpanel, 'Fit Peaks', action=self.onFitPeaks), 0,
LEFT)
bpanel.Add(Button(bpanel, 'Done', action=self.onClose), 0, LEFT)
bpanel.pack()
sizer.Add(bpanel, 0, CEN)
pack(self, sizer)
self.Show()
self.Raise()
def __init__(self, parent=None, text=None, size=(550, 600), **kws):
wx.Frame.__init__(self, parent, size=size, style=FRAMESTYLE)
self.report = RichTextCtrl(self, size=(500, 500), style=wx.VSCROLL)
self.report.SetEditable(False)
self.report.SetFont(Font(11))
self.report.SetMinSize((500, 500))
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(self.report, 1, wx.ALL | wx.GROW, 2)
pack(self, sizer)
if text is not None:
self.set_text(text)
self.Show()
self.Raise()
def __init__(self,
parent,
param,
size=(80, -1),
show_name=False,
precision=4,
**kws):
self.param = param
self.precision = precision
wx.Panel.__init__(self, parent, -1)
self.wids = Empty()
self.wids.val = FloatCtrl(self,
value=param.value,
minval=param.min,
maxval=param.max,
precision=precision,
size=size)
self.wids.name = None
self.wids.edit = wx.Button(self, label='edit', size=(45, 25))
self.wids.edit.Bind(wx.EVT_BUTTON, self.onConfigure)
self.wids.edit.SetToolTip(wx.ToolTip("Configure Parameter"))
self.wids.vary = Choice(self,
choices=VARY_CHOICES,
action=self.onVaryChoice,
size=(80, -1))
vary_choice = 0
if param.vary:
vary_choice = 1
elif param.expr is not None:
vary_choice = 2
self.wids.vary.SetSelection(vary_choice)
sizer = wx.BoxSizer(wx.HORIZONTAL)
CLEFT = LEFT | wx.ALL | wx.ALIGN_CENTER_VERTICAL
if show_name:
self.wids.name = wx.StaticText(self,
label="%s: " % param.name,
size=(len(param.name) * 8, -1))
sizer.Add(self.wids.name, 0, CLEFT)
sizer.Add(self.wids.val, 0, CLEFT)
sizer.Add(self.wids.vary, 0, CLEFT)
sizer.Add(self.wids.edit, 0, CLEFT)
pack(self, sizer)
def __init__(self, parent=None, text=None, size=(550, 600), **kws):
wx.Frame.__init__(self, parent, size=size, style=FRAMESTYLE)
self.report = RichTextCtrl(self,size=(500, 500),
style=wx.VSCROLL)
self.report.SetEditable(False)
self.report.SetFont(Font(11))
self.reportx.SetMinSize((500, 500))
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(self.report, 1, wx.ALL|wx.GROW, 2)
pack(self, sizer)
if text is not None:
self.set_text(text)
self.Show()
self.Raise()
def CustomConfig(self, panel, sizer=None, irow=0):
"""config panel for left-hand-side of frame"""
labstyle = wx.ALIGN_LEFT|wx.LEFT|wx.TOP|wx.EXPAND
zoom_opts = ('Zoom to Rectangle',
'Pick Area for XRF Spectrum',
'Show Line Profile')
if self.wxmplot_version > 0.921:
cpanel = wx.Panel(panel)
if sizer is None:
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(SimpleText(cpanel, label='Cursor Modes', style=labstyle), 0, labstyle, 3)
self.zoom_mode = wx.RadioBox(cpanel, -1, "",
wx.DefaultPosition, wx.DefaultSize,
zoom_opts, 1, wx.RA_SPECIFY_COLS)
self.zoom_mode.Bind(wx.EVT_RADIOBOX, self.onCursorMode)
sizer.Add(self.zoom_mode, 1, labstyle, 4)
if self.save_callback is not None:
sizer.Add(SimpleText(cpanel, label='Save Position:', style=labstyle), 0, labstyle, 3)
self.pos_name = wx.TextCtrl(cpanel, -1, '', size=(155, -1),
style=wx.TE_PROCESS_ENTER)
self.pos_name.Bind(wx.EVT_TEXT_ENTER, self.onSavePixel)
sizer.Add(self.pos_name, 0, labstyle, 3)
pack(cpanel, sizer)
return cpanel
else: # support older versions of wxmplot, will be able to deprecate
conf = self.panel.conf
lpanel = panel
lsizer = sizer
self.zoom_mode = wx.RadioBox(panel, -1, "Cursor Mode:",
wx.DefaultPosition, wx.DefaultSize,
zoom_opts, 1, wx.RA_SPECIFY_COLS)
self.zoom_mode.Bind(wx.EVT_RADIOBOX, self.onCursorMode)
sizer.Add(self.zoom_mode, (irow, 0), (1, 4), labstyle, 3)
if self.save_callback is not None:
self.pos_name = wx.TextCtrl(panel, -1, '', size=(175, -1),
style=wx.TE_PROCESS_ENTER)
self.pos_name.Bind(wx.EVT_TEXT_ENTER, self.onSavePixel)
label = SimpleText(panel, label='Save Position:',
size=(-1, -1))
sizer.Add(label, (irow+1, 0), (1, 2), labstyle, 3)
sizer.Add(self.pos_name, (irow+1, 2), (1, 2), labstyle, 3)
def __init__(self,
parent,
id=-1,
pos=wx.DefaultPosition,
size=wx.DefaultSize,
style=wx.SP_3D | wx.SP_LIVE_UPDATE,
name='Filling Window',
rootObject=None,
rootLabel=None,
rootIsNamespace=False,
static=False):
"""Create a Filling instance."""
wx.SplitterWindow.__init__(self, parent, id, pos, size, style, name)
leftpanel = wx.Panel(self)
leftsizer = wx.BoxSizer(wx.VERTICAL)
# self.refresh = Button(leftpanel, 'Refresh', size=(125, -1),
# action=self.onRefresh)
self.tree = FillingTree(parent=leftpanel,
rootObject=rootObject,
rootLabel=rootLabel,
rootIsNamespace=rootIsNamespace,
static=static)
# leftsizer.Add(self.refresh, 0, wx.ALIGN_TOP, 1)
leftsizer.Add(self.tree, 1, wx.EXPAND | wx.ALL, 1)
pack(leftpanel, leftsizer)
# self.text = FillingRST(parent=self, static=static)
self.text = FillingText(parent=self, static=static)
wx.CallLater(1, self.SplitVertically, leftpanel, self.text, 200)
self.SetMinimumPaneSize(1)
# Override the filling so that descriptions go to FillingText.
self.tree.setText = self.text.SetText
# Display the root item.
if self.tree.root is not None:
self.tree.SelectItem(self.tree.root)
self.tree.display()
self.Bind(wx.EVT_SPLITTER_SASH_POS_CHANGED, self.OnChanged)
def createMainPanel(self):
panel = wx.Panel(self)
sizer = wx.GridBagSizer(5, 4)
lab_roi = SimpleText(panel, ' Element / ROI Name:')
lab_dir = SimpleText(panel, ' Output Folder:')
lab_ath = SimpleText(panel, ' Athena Project File:')
lab_bad = SimpleText(panel, ' Bad Channels:')
lab_sel = SimpleText(panel, ' Select Files:')
self.wid_roi = wx.TextCtrl(panel, -1, '', size=(200, -1))
self.wid_dir = wx.TextCtrl(panel, -1, 'DT_Corrected', size=(200, -1))
self.wid_ath = wx.TextCtrl(panel, -1, 'Athena_001.prj', size=(200, -1))
self.wid_bad = wx.TextCtrl(panel, -1, ' ', size=(200, -1))
self.wid_autoname = Check(panel,
default=True,
size=(150, -1),
label='auto-increment?')
self.sel_wid = Button(panel,
'Browse',
size=(100, -1),
action=self.onBrowse)
ir = 0
sizer.Add(lab_roi, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.wid_roi, (ir, 1), (1, 1), LCEN, 2)
ir += 1
sizer.Add(lab_dir, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.wid_dir, (ir, 1), (1, 1), LCEN, 2)
ir += 1
sizer.Add(lab_ath, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.wid_ath, (ir, 1), (1, 1), LCEN, 2)
sizer.Add(self.wid_autoname, (ir, 2), (1, 1), LCEN, 2)
ir += 1
sizer.Add(lab_bad, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.wid_bad, (ir, 1), (1, 1), LCEN, 2)
ir += 1
sizer.Add(lab_sel, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.sel_wid, (ir, 1), (1, 1), LCEN, 2)
pack(panel, sizer)
wx.CallAfter(self.init_larch)
return
def __init__(self, parent, size=(675, 525)):
self.parent = parent
self.larch = parent.larch
self.mca = parent.mca
conf = parent.conf
self.paramgroup = Group()
if not hasattr(self.mca, 'init_calib'):
xrf_calib_fitrois(self.mca, _larch=self.larch)
wx.Frame.__init__(self, parent, -1, 'Fit XRF Spectra',
size=size, style=wx.DEFAULT_FRAME_STYLE)
if not hasattr(self.parent, 'filters_data'):
self.parent.filters_data = read_filterdata(self.Filter_Materials,
_larch=self.larch)
self.wids = Empty()
self.SetFont(Font(9))
self.panels = {}
self.nb = flat_nb.FlatNotebook(self, wx.ID_ANY, agwStyle=FNB_STYLE)
self.nb.SetBackgroundColour('#FBFBF8')
self.SetBackgroundColour('#F6F6F0')
self.nb.AddPage(self.settings_page(), 'Fit & Background Settings')
self.nb.AddPage(self.filters_page(), 'Filters and Attenuation')
self.nb.AddPage(self.fitpeaks_page(), 'XRF Peaks')
self.nb.SetSelection(0)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(self.nb, 1, wx.ALL|wx.EXPAND)
sizer.Add((5,5))
sizer.Add(HLine(self, size=(675, 3)), 0, CEN|LEFT|wx.TOP|wx.GROW)
sizer.Add((5,5))
bpanel = RowPanel(self)
bpanel.Add(Button(bpanel, 'Fit Peaks', action=self.onFitPeaks), 0, LEFT)
bpanel.Add(Button(bpanel, 'Done', action=self.onClose), 0, LEFT)
bpanel.pack()
sizer.Add(bpanel, 0, CEN)
pack(self, sizer)
self.Show()
self.Raise()
def CreateFitPanel(self, parent):
panel = wx.Panel(parent)
tpan = wx.Panel(panel)
self.fit_model = Choice(tpan,
size=(100, -1),
choices=('Gaussian', 'Lorentzian', 'Voigt',
'Linear', 'Quadratic', 'Step',
'Rectangle', 'Exponential'))
self.fit_bkg = Choice(tpan,
size=(100, -1),
choices=('None', 'constant', 'linear',
'quadratic'))
self.fit_step = Choice(tpan,
size=(100, -1),
choices=('linear', 'error function', 'arctan'))
tsizer = wx.GridBagSizer(10, 4)
tsizer.Add(SimpleText(tpan, 'Fit Model: '), (0, 0), (1, 1), LCEN)
tsizer.Add(self.fit_model, (0, 1), (1, 1), LCEN)
tsizer.Add(SimpleText(tpan, 'Background: '), (0, 2), (1, 1), LCEN)
tsizer.Add(self.fit_bkg, (0, 3), (1, 1), LCEN)
tsizer.Add(
Button(tpan, 'Show Fit', size=(100, -1), action=self.onFitPeak),
(1, 1), (1, 1), LCEN)
tsizer.Add(SimpleText(tpan, 'Step Form: '), (1, 2), (1, 1), LCEN)
tsizer.Add(self.fit_step, (1, 3), (1, 1), LCEN)
pack(tpan, tsizer)
self.fit_report = RichTextCtrl(panel,
size=(525, 250),
style=wx.VSCROLL | wx.NO_BORDER)
self.fit_report.SetEditable(False)
self.fit_report.SetFont(Font(9))
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(tpan, 0, wx.GROW | wx.ALL, 2)
sizer.Add(self.fit_report, 1, LCEN | wx.GROW, 2)
pack(panel, sizer)
return panel
def __init__(self, parent, size=(550, 700)):
self.parent = parent
self._larch = parent.larch
self.mca = parent.mca
self.conf = {}
self.paramgroup = Group()
wx.Frame.__init__(self, parent, -1, 'Fit XRF Spectra',
size=size, style=wx.DEFAULT_FRAME_STYLE)
if not hasattr(self.parent, 'filters_data'):
self.parent.filters_data = read_filterdata(self.Filter_Materials,
_larch=self._larch)
self.wids = {}
self.panels = OrderedDict()
self.panels['Beam, Detector, Filters'] = self.beamdet_page
self.panels['Elements and Peaks'] = self.elempeaks_page
self.nb = flatnotebook(self, self.panels)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(self.nb, 1, wx.ALL|wx.EXPAND)
bpanel = wx.Panel(self)
self.SetBackgroundColour((235, 235, 235))
bsizer = wx.BoxSizer(wx.HORIZONTAL)
self.wids['show_components'] = Check(bpanel, label='Show All Components',
default=False)
bsizer.Add(Button(bpanel, 'Calculate Model',
action=self.onShowModel), 0, LEFT)
bsizer.Add(Button(bpanel, 'Fit Model',
action=self.onFitModel), 0, LEFT)
bsizer.Add(self.wids['show_components'], 0, LEFT)
pack(bpanel, bsizer)
sizer.Add(bpanel, 0, CEN)
sizer.Add((5,5))
pack(self, sizer)
self.Show()
self.Raise()
def createMainPanel(self):
ctrlpanel = self.createControlPanel()
plotpanel = self.panel = self.createPlotPanel()
plotpanel.yformatter = self._formaty
tx, ty = self.wids['ptable'].GetBestSize()
cx, cy = ctrlpanel.GetBestSize()
px, py = plotpanel.GetBestSize()
self.SetSize((max(cx, tx)+px, 25+max(cy, py)))
style = wx.ALIGN_LEFT|wx.EXPAND|wx.ALL
sizer = wx.BoxSizer(wx.HORIZONTAL)
sizer.Add(ctrlpanel, 0, style, 3)
sizer.Add(plotpanel, 1, style, 2)
self.SetMinSize((450, 150))
pack(self, sizer)
self.set_roilist(mca=None)
def createMainPanel(self):
ctrlpanel = self.createControlPanel()
plotpanel = self.panel = self.createPlotPanel()
plotpanel.yformatter = self._formaty
tx, ty = self.wids['ptable'].GetBestSize()
cx, cy = ctrlpanel.GetBestSize()
px, py = plotpanel.GetBestSize()
self.SetSize((max(cx, tx)+px, 25+max(cy, py)))
style = wx.ALIGN_LEFT|wx.EXPAND|wx.ALL
sizer = wx.BoxSizer(wx.HORIZONTAL)
sizer.Add(ctrlpanel, 0, style, 3)
sizer.Add(plotpanel, 1, style, 2)
self.SetMinSize((450, 150))
pack(self, sizer)
wx.CallAfter(self.init_larch)
self.set_roilist(mca=None)
def createMainPanel(self):
panel = wx.Panel(self)
sizer = wx.GridBagSizer(5, 4)
lab_roi = SimpleText(panel, ' Element / ROI Name:')
lab_dir = SimpleText(panel, ' Output Folder:')
lab_ath = SimpleText(panel, ' Athena Project File:')
lab_bad = SimpleText(panel, ' Bad Channels:')
lab_sel = SimpleText(panel, ' Select Files:')
self.wid_roi = wx.TextCtrl(panel, -1, '', size=(200, -1))
self.wid_dir = wx.TextCtrl(panel, -1, 'DT_Corrected', size=(200, -1))
self.wid_ath = wx.TextCtrl(panel, -1, 'Athena_001.prj', size=(200, -1))
self.wid_bad = wx.TextCtrl(panel, -1, ' ', size=(200, -1))
self.wid_autoname = Check(panel, default=True,
size=(150, -1), label='auto-increment?')
self.sel_wid = Button(panel, 'Browse', size=(100, -1),
action=self.onBrowse)
ir = 0
sizer.Add(lab_roi, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.wid_roi, (ir, 1), (1, 1), LCEN, 2)
ir += 1
sizer.Add(lab_dir, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.wid_dir, (ir, 1), (1, 1), LCEN, 2)
ir += 1
sizer.Add(lab_ath, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.wid_ath, (ir, 1), (1, 1), LCEN, 2)
sizer.Add(self.wid_autoname, (ir, 2), (1, 1), LCEN, 2)
ir += 1
sizer.Add(lab_bad, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.wid_bad, (ir, 1), (1, 1), LCEN, 2)
ir += 1
sizer.Add(lab_sel, (ir, 0), (1, 1), LCEN, 2)
sizer.Add(self.sel_wid, (ir, 1), (1, 1), LCEN, 2)
pack(panel, sizer)
wx.CallAfter(self.init_larch)
return
def CreateFitPanel(self, parent):
panel = wx.Panel(parent)
tpan = wx.Panel(panel)
self.fit_model = Choice(tpan, size=(100, -1),
choices=('Gaussian', 'Lorentzian',
'Voigt', 'Linear', 'Quadratic',
'Step', 'Rectangle',
'Exponential'))
self.fit_bkg = Choice(tpan, size=(100, -1),
choices=('None', 'constant', 'linear', 'quadratic'))
self.fit_step = Choice(tpan, size=(100, -1),
choices=('linear', 'error function', 'arctan'))
tsizer = wx.GridBagSizer(10, 4)
tsizer.Add(SimpleText(tpan, 'Fit Model: '), (0, 0), (1, 1), LCEN)
tsizer.Add(self.fit_model, (0, 1), (1, 1), LCEN)
tsizer.Add(SimpleText(tpan, 'Background: '), (0, 2), (1, 1), LCEN)
tsizer.Add(self.fit_bkg, (0, 3), (1, 1), LCEN)
tsizer.Add(Button(tpan, 'Show Fit', size=(100, -1),
action=self.onFitPeak), (1, 1), (1, 1), LCEN)
tsizer.Add(SimpleText(tpan, 'Step Form: '), (1, 2), (1, 1), LCEN)
tsizer.Add(self.fit_step, (1, 3), (1, 1), LCEN)
pack(tpan, tsizer)
self.fit_report = RichTextCtrl(panel, size=(525, 250),
style=wx.VSCROLL|wx.NO_BORDER)
self.fit_report.SetEditable(False)
self.fit_report.SetFont(Font(9))
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(tpan, 0, wx.GROW|wx.ALL, 2)
sizer.Add(self.fit_report, 1, LCEN|wx.GROW, 2)
pack(panel, sizer)
return panel
def __init__(self, parent, id=-1, pos=wx.DefaultPosition,
size=wx.DefaultSize, style=wx.SP_3D|wx.SP_LIVE_UPDATE,
name='Filling Window', rootObject=None,
rootLabel=None, rootIsNamespace=False, static=False):
"""Create a Filling instance."""
wx.SplitterWindow.__init__(self, parent, id, pos, size, style, name)
leftpanel = wx.Panel(self)
leftsizer = wx.BoxSizer(wx.VERTICAL)
# self.refresh = Button(leftpanel, 'Refresh', size=(125, -1),
# action=self.onRefresh)
self.tree = FillingTree(parent=leftpanel, rootObject=rootObject,
rootLabel=rootLabel,
rootIsNamespace=rootIsNamespace,
static=static)
# leftsizer.Add(self.refresh, 0, wx.ALIGN_TOP, 1)
leftsizer.Add(self.tree, 1, wx.EXPAND|wx.ALL, 1)
pack(leftpanel, leftsizer)
# self.text = FillingRST(parent=self, static=static)
self.text = FillingText(parent=self, static=static)
wx.CallLater(1, self.SplitVertically, leftpanel, self.text, 200)
self.SetMinimumPaneSize(1)
# Override the filling so that descriptions go to FillingText.
self.tree.setText = self.text.SetText
# Display the root item.
if self.tree.root is not None:
self.tree.SelectItem(self.tree.root)
self.tree.display()
self.Bind(wx.EVT_SPLITTER_SASH_POS_CHANGED, self.OnChanged)
def __init__(self, parent, param, size=(80, -1), show_name=False, precision=4, **kws):
self.param = param
self.precision = precision
wx.Panel.__init__(self, parent, -1)
self.wids = Empty()
self.wids.val = FloatCtrl(self, value=param.value,
minval=param.min, maxval=param.max,
precision=precision, size=size)
self.wids.name = None
self.wids.edit = wx.Button(self, label='edit', size=(45, 25))
self.wids.edit.Bind(wx.EVT_BUTTON, self.onConfigure)
self.wids.edit.SetToolTip(wx.ToolTip("Configure Parameter"))
self.wids.vary = Choice(self, choices=VARY_CHOICES,
action=self.onVaryChoice, size=(80, -1))
vary_choice = 0
if param.vary:
vary_choice = 1
elif param.expr is not None:
vary_choice = 2
self.wids.vary.SetSelection(vary_choice)
sizer = wx.BoxSizer(wx.HORIZONTAL)
CLEFT = LEFT|wx.ALL|wx.ALIGN_CENTER_VERTICAL
if show_name:
self.wids.name = wx.StaticText(self,
label="%s: " % param.name,
size=(len(param.name)*8, -1))
sizer.Add(self.wids.name, 0, CLEFT)
sizer.Add(self.wids.val, 0, CLEFT)
sizer.Add(self.wids.vary, 0, CLEFT)
sizer.Add(self.wids.edit, 0, CLEFT)
pack(self, sizer)
def createMainPanel(self):
splitter = wx.SplitterWindow(self, style=wx.SP_LIVE_UPDATE)
splitter.SetMinimumPaneSize(250)
leftpanel = wx.Panel(splitter)
ltop = wx.Panel(leftpanel)
def Btn(msg, x, act):
b = Button(ltop, msg, size=(x, 30), action=act)
b.SetFont(Font(11))
return b
plot_one = Btn('Plot One', 120, self.onPlotOne)
plot_sel = Btn('Plot Selected', 120, self.onPlotSel)
sel_none = Btn('Select None', 120, self.onSelNone)
sel_all = Btn('Select All', 120, self.onSelAll)
self.controller.filelist = FileCheckList(leftpanel, main=self,
select_action=self.ShowFile)
self.controller.filelist.SetBackgroundColour(wx.Colour(255, 255, 255))
tsizer = wx.GridBagSizer(1, 1)
tsizer.Add(plot_one, (0, 0), (1, 1), LCEN, 2)
tsizer.Add(plot_sel, (0, 1), (1, 1), LCEN, 2)
tsizer.Add(sel_all, (1, 0), (1, 1), LCEN, 2)
tsizer.Add(sel_none, (1, 1), (1, 1), LCEN, 2)
pack(ltop, tsizer)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(ltop, 0, LCEN|wx.GROW, 1)
sizer.Add(self.controller.filelist, 1, LCEN|wx.GROW|wx.ALL, 1)
pack(leftpanel, sizer)
# right hand side
panel = wx.Panel(splitter)
sizer = wx.BoxSizer(wx.VERTICAL)
self.title = SimpleText(panel, 'initializing...')
self.title.SetFont(Font(10))
ir = 0
sizer.Add(self.title, 0, LCEN|wx.GROW|wx.ALL, 1)
self.nb = flat_nb.FlatNotebook(panel, -1, agwStyle=FNB_STYLE)
self.nb.SetTabAreaColour(wx.Colour(250,250,250))
self.nb.SetActiveTabColour(wx.Colour(254,254,195))
self.nb.SetNonActiveTabTextColour(wx.Colour(10,10,128))
self.nb.SetActiveTabTextColour(wx.Colour(128,0,0))
panel_opts = dict(parent=self.nb, controller=self.controller)
self.proc_panel = ProcessPanel(**panel_opts)
self.fit_panel = XYFitPanel(**panel_opts)
self.nb.AddPage(self.proc_panel, ' Data Processing ', True)
self.nb.AddPage(self.fit_panel, ' Curve Fitting ', True)
sizer.Add(self.nb, 1, LCEN|wx.EXPAND, 2)
self.nb.SetSelection(0)
pack(panel, sizer)
splitter.SplitVertically(leftpanel, panel, 1)
wx.CallAfter(self.init_larch)
def build_display(self):
self.SetFont(Font(10))
titleopts = dict(font=Font(11), colour='#AA0000')
gopts = dict(ncols=4, nrows=4, pad=2, itemstyle=LCEN)
xas = self.xaspanel = GridPanel(self, **gopts)
gen = self.genpanel = GridPanel(self, **gopts)
self.btns = {}
#gen
opts = dict(action=self.UpdatePlot, size=(65, -1), gformat=True)
self.xshift = FloatCtrl(gen, value=0.0, **opts)
self.xscale = FloatCtrl(gen, value=1.0, **opts)
self.yshift = FloatCtrl(gen, value=0.0, **opts)
self.yscale = FloatCtrl(gen, value=1.0, **opts)
self.btns['xshift'] = BitmapButton(gen, get_icon('plus'),
action=partial(self.on_selpoint, opt='xshift'),
tooltip='use last point selected from plot')
self.btns['yshift'] = BitmapButton(gen, get_icon('plus'),
action=partial(self.on_selpoint, opt='yshift'),
tooltip='use last point selected from plot')
opts = dict(action=self.onSmoothChoice, size=(30, -1))
sm_row1 = wx.Panel(gen)
sm_row2 = wx.Panel(gen)
sm_siz1= wx.BoxSizer(wx.HORIZONTAL)
sm_siz2= wx.BoxSizer(wx.HORIZONTAL)
self.smooth_c0 = FloatCtrl(sm_row1, value=2, precision=0, **opts)
self.smooth_c1 = FloatCtrl(sm_row1, value=1, precision=0, **opts)
opts['size'] = (65, -1)
self.smooth_sig = FloatCtrl(sm_row2, value=1, gformat=True, **opts)
opts['size'] = (120, -1)
self.smooth_op = Choice(sm_row1, choices=SMOOTH_OPS, **opts)
self.smooth_op.SetSelection(0)
self.smooth_conv = Choice(sm_row2, choices=CONV_OPS, **opts)
self.smooth_c0.Disable()
self.smooth_c1.Disable()
self.smooth_sig.Disable()
self.smooth_conv.SetSelection(0)
self.smooth_conv.Disable()
sm_siz1.Add(self.smooth_op, 0, LCEN, 1)
sm_siz1.Add(SimpleText(sm_row1, ' n= '), 0, LCEN, 1)
sm_siz1.Add(self.smooth_c0, 0, LCEN, 1)
sm_siz1.Add(SimpleText(sm_row1, ' order= '), 0, LCEN, 1)
sm_siz1.Add(self.smooth_c1, 0, LCEN, 1)
sm_siz2.Add(SimpleText(sm_row2, ' form= '), 0, LCEN, 1)
sm_siz2.Add(self.smooth_conv, 0, LCEN, 1)
sm_siz2.Add(SimpleText(sm_row2, ' sigma= '), 0, LCEN, 1)
sm_siz2.Add(self.smooth_sig, 0, LCEN, 1)
pack(sm_row1, sm_siz1)
pack(sm_row2, sm_siz2)
gen.Add(SimpleText(gen, ' General Data Processing', **titleopts), dcol=8)
gen.Add(SimpleText(gen, ' X shift:'), newrow=True)
gen.Add(self.btns['xshift'])
gen.Add(self.xshift, dcol=2)
gen.Add(SimpleText(gen, ' X scale:'))
gen.Add(self.xscale, dcol=2)
gen.Add(SimpleText(gen, ' Y shift:'), newrow=True)
gen.Add(self.btns['yshift'])
gen.Add(self.yshift, dcol=2)
gen.Add(SimpleText(gen, ' Y scale:'))
gen.Add(self.yscale, dcol=2)
gen.Add(SimpleText(gen, ' Smoothing:'), newrow=True)
gen.Add(sm_row1, dcol=7)
gen.Add(sm_row2, icol=1, dcol=7, newrow=True)
gen.pack()
#xas
opts = {'action': self.UpdatePlot}
e0opts_panel = wx.Panel(xas)
self.xas_autoe0 = Check(e0opts_panel, default=True, label='auto?', **opts)
self.xas_showe0 = Check(e0opts_panel, default=True, label='show?', **opts)
sx = wx.BoxSizer(wx.HORIZONTAL)
sx.Add(self.xas_autoe0, 0, LCEN, 4)
sx.Add(self.xas_showe0, 0, LCEN, 4)
pack(e0opts_panel, sx)
self.xas_autostep = Check(xas, default=True, label='auto?', **opts)
opts['size'] = (250, -1)
self.xas_op = Choice(xas, choices=XASOPChoices, **opts)
for name in ('e0', 'pre1', 'pre2', 'nor1', 'nor2'):
bb = BitmapButton(xas, get_icon('plus'),
action=partial(self.on_selpoint, opt=name),
tooltip='use last point selected from plot')
self.btns[name] = bb
opts = {'size': (65, -1), 'gformat': True,
'action': self.UpdatePlot}
self.xas_e0 = FloatCtrl(xas, value=0, **opts)
self.xas_step = FloatCtrl(xas, value=0, **opts)
opts['precision'] = 1
self.xas_pre1 = FloatCtrl(xas, value=-200, **opts)
self.xas_pre2 = FloatCtrl(xas, value= -30, **opts)
self.xas_nor1 = FloatCtrl(xas, value= 50, **opts)
self.xas_nor2 = FloatCtrl(xas, value= -50, **opts)
opts = {'size': (50, -1),
'choices': ('0', '1', '2', '3'),
'action': self.UpdatePlot}
self.xas_vict = Choice(xas, **opts)
self.xas_nnor = Choice(xas, **opts)
self.xas_vict.SetSelection(1)
self.xas_nnor.SetSelection(2)
def CopyBtn(name):
return Button(xas, 'Copy', size=(50, 30),
action=partial(self.onCopyParam, name))
xas.Add(SimpleText(xas, ' XAS Data Processing', **titleopts), dcol=6)
xas.Add(SimpleText(xas, ' Copy to Selected Groups?'), style=RCEN, dcol=3)
xas.Add(SimpleText(xas, 'Arrays to Plot: '), newrow=True)
xas.Add(self.xas_op, dcol=6)
xas.Add((10, 10))
xas.Add(CopyBtn('xas_op'), style=RCEN)
xas.Add(SimpleText(xas, 'E0 : '), newrow=True)
xas.Add(self.btns['e0'])
xas.Add(self.xas_e0)
xas.Add(e0opts_panel, dcol=4)
xas.Add((10, 1))
xas.Add(CopyBtn('xas_e0'), style=RCEN)
xas.Add(SimpleText(xas, 'Edge Step: '), newrow=True)
xas.Add((10, 1))
xas.Add(self.xas_step)
xas.Add(self.xas_autostep, dcol=3)
xas.Add((10, 1))
xas.Add((10, 1))
xas.Add(CopyBtn('xas_step'), style=RCEN)
xas.Add(SimpleText(xas, 'Pre-edge range: '), newrow=True)
xas.Add(self.btns['pre1'])
xas.Add(self.xas_pre1)
xas.Add(SimpleText(xas, ':'))
xas.Add(self.btns['pre2'])
xas.Add(self.xas_pre2)
xas.Add(SimpleText(xas, 'Victoreen:'))
xas.Add(self.xas_vict)
xas.Add(CopyBtn('xas_pre'), style=RCEN)
xas.Add(SimpleText(xas, 'Normalization range: '), newrow=True)
xas.Add(self.btns['nor1'])
xas.Add(self.xas_nor1)
xas.Add(SimpleText(xas, ':'))
xas.Add(self.btns['nor2'])
xas.Add(self.xas_nor2)
xas.Add(SimpleText(xas, 'PolyOrder:'))
xas.Add(self.xas_nnor)
xas.Add(CopyBtn('xas_norm'), style=RCEN)
xas.pack()
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.AddMany([((10,10), 0, LCEN, 0),
(gen, 0, LCEN, 10),
((10,10), 0, LCEN, 0),
(HLine(self, size=(550, 2)), 0, LCEN, 10),
((10,10), 0, LCEN, 0),
(xas, 1, LCEN|wx.GROW, 10)])
xas.Disable()
pack(self, sizer)
def __init__(self, parent, filename=None, read_ok_cb=None,
size=(725, 450), _larch=None):
self.parent = parent
self.filename = filename
self.larch = _larch
self.read_ok_cb = read_ok_cb
self.colors = GUIColors()
wx.Frame.__init__(self, parent, -1, size=size, style=FRAMESTYLE)
splitter = wx.SplitterWindow(self, style=wx.SP_LIVE_UPDATE)
splitter.SetMinimumPaneSize(200)
leftpanel = wx.Panel(splitter)
ltop = wx.Panel(leftpanel)
sel_none = Button(ltop, 'Select None', size=(100, 30), action=self.onSelNone)
sel_all = Button(ltop, 'Select All', size=(100, 30), action=self.onSelAll)
sel_imp = Button(ltop, 'Import Selected Groups', size=(200, 30), action=self.onOK)
self.select_imported = sel_imp
self.grouplist = FileCheckList(leftpanel, select_action=self.onShowGroup)
tsizer = wx.GridBagSizer(2, 2)
tsizer.Add(sel_all, (0, 0), (1, 1), LCEN, 0)
tsizer.Add(sel_none, (0, 1), (1, 1), LCEN, 0)
tsizer.Add(sel_imp, (1, 0), (1, 2), LCEN, 0)
pack(ltop, tsizer)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(ltop, 0, LCEN|wx.GROW, 1)
sizer.Add(self.grouplist, 1, LCEN|wx.GROW|wx.ALL, 1)
pack(leftpanel, sizer)
# right hand side
rightpanel = wx.Panel(splitter)
self.SetTitle("Reading Athena Project '%s'" % self.filename)
self.title = SimpleText(rightpanel, self.filename, font=Font(13),
colour=self.colors.title, style=LCEN)
self.plotpanel = PlotPanel(rightpanel, messenger=self.plot_messages)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(self.title, 0, LCEN, 2)
sizer.Add(self.plotpanel, 0, LCEN, 2)
pack(rightpanel, sizer)
splitter.SplitVertically(leftpanel, rightpanel, 1)
self.statusbar = self.CreateStatusBar(2, 0)
self.statusbar.SetStatusWidths([-3, -1])
statusbar_fields = [self.filename, ""]
for i in range(len(statusbar_fields)):
self.statusbar.SetStatusText(statusbar_fields[i], i)
self.a_project = read_athena(self.filename, do_bkg=False, do_fft=False,
_larch=_larch)
self.allgroups = []
for item in dir(self.a_project):
if not item.startswith('_athena_'):
self.allgroups.append(item)
self.grouplist.Append(item)
self.Show()
self.Raise()
def beamdet_page(self, **kws):
"beam / detector settings"
mca = self.parent.mca
conf = self.parent.conf
xray_energy = getattr(mca, 'incident_energy', None)
if xray_energy is None:
xray_energy = 20.0
if xray_energy < 250:
xray_energy = 1000.0 * xray_energy
mca.incident_energy = xray_energy
en_min = getattr(conf, 'e_min', 1.0) * 1000.0
en_max = getattr(conf, 'e_max', None)
if en_max is None:
en_max = mca.incident_energy
en_max = en_max * 1000.0
cal_offset = getattr(mca, 'offset', 0) * 1000.0
cal_slope = getattr(mca, 'slope', 0.010) * 1000.0
det_efano = getattr(mca, 'det_efano', EFano['Si'])
det_noise = getattr(mca, 'det_noise', 30)
det_efano = getattr(mca, 'det_efano', EFano['Si'])
width = getattr(mca, 'bgr_width', 5000)
expon = getattr(mca, 'bgr_exponent', 2)
wids = self.wids
main = wx.Panel(self)
pdet = GridPanel(main, itemstyle=LEFT)
pflt = GridPanel(main, itemstyle=LEFT)
wids['bgr_use'] = Check(pdet, label='Fit Background-Subtracted Spectrum',
default=False, action=self.onUseBackground)
wids['bgr_width'] = FloatSpin(pdet, value=width, min_val=0, max_val=15000,
digits=0, increment=500, size=(100, -1))
wids['bgr_expon'] = Choice(pdet, choices=['2', '4', '6'],
size=(70, -1), default=0)
wids['bgr_show'] = Button(pdet, 'Show Background', size=(150, -1),
action=self.onShowBgr)
wids['bgr_width'].Disable()
wids['bgr_expon'].Disable()
wids['bgr_show'].Disable()
wids['cal_slope'] = FloatSpin(pdet, value=cal_slope,
min_val=0, max_val=100,
digits=3, increment=0.01, size=(100, -1))
wids['cal_offset'] = FloatSpin(pdet, value=cal_offset,
min_val=-500, max_val=500,
digits=3, increment=0.01, size=(100, -1))
wids['cal_vary'] = VarChoice(pdet, default=0)
wids['det_mat'] = Choice(pdet, choices=Detector_Materials,
size=(55, -1), default=0,
action=self.onDetMaterial)
wids['det_thk'] = FloatSpin(pdet, value=0.400, size=(100, -1),
increment=0.010, min_val=0, max_val=10,
digits=3)
wids['det_noise_vary'] = VarChoice(pdet, default=1)
wids['det_efano_vary'] = VarChoice(pdet, default=0)
opts = dict(size=(100, -1), min_val=0, max_val=250000,
digits=1, increment=10)
wids['en_xray'] = FloatSpin(pdet, value=xray_energy, **opts)
wids['en_min'] = FloatSpin(pdet, value=en_min, **opts)
wids['en_max'] = FloatSpin(pdet, value=en_max, **opts)
opts.update({'digits': 4, 'max_val': 500, 'increment': 1})
wids['det_noise'] = FloatSpin(pdet, value=det_noise, **opts)
opts.update({'max_val': 1, 'increment': 0.001})
wids['det_efano'] = FloatSpin(pdet, value=det_efano, **opts)
pdet.AddText(' Beam Energy, Fit Range :', colour='#880000', dcol=3)
pdet.AddText(' X-ray Energy (eV): ', newrow=True)
pdet.Add(wids['en_xray'])
pdet.AddText(' Fit Range (eV): ', newrow=True)
pdet.Add(wids['en_min'])
pdet.AddText(' : ')
pdet.Add(wids['en_max'])
pdet.Add(HLine(pdet, size=(550, 3)), dcol=4, newrow=True)
pdet.AddText(' Energy Calibration :', colour='#880000', dcol=1, newrow=True)
pdet.AddText(' Vary in fit:')
pdet.Add(wids['cal_vary'], dcol=2)
pdet.AddText(' Offset (eV): ', newrow=True)
pdet.Add(wids['cal_offset'])
pdet.AddText(' Slope (eV/bin): ', newrow=True)
pdet.Add(wids['cal_slope'])
pdet.Add(HLine(pdet, size=(550, 3)), dcol=4, newrow=True)
pdet.AddText(' Detector :', colour='#880000', dcol=4, newrow=True)
pdet.AddText(' Material: ', newrow=True)
pdet.Add(wids['det_mat'])
pdet.AddText(' Thickness (mm): ', newrow=True)
pdet.Add(wids['det_thk'])
pdet.AddText(' Noise (eV): ', newrow=True)
pdet.Add(wids['det_noise'])
pdet.Add(wids['det_noise_vary'], dcol=2)
pdet.AddText(' E_Fano (eV): ', newrow=True)
pdet.Add(wids['det_efano'])
pdet.Add(wids['det_efano_vary'], dcol=2)
pdet.AddText(EFano_Text, newrow=True, dcol=4)
pdet.Add(HLine(pdet, size=(550, 3)), dcol=4, newrow=True)
pdet.AddText(" Background: ", colour='#880000', newrow=True)
pdet.Add(wids['bgr_use'], dcol=3)
pdet.AddText(' Exponent:', newrow=True)
pdet.Add(wids['bgr_expon'])
pdet.AddText(' Width (keV): ', newrow=True)
pdet.Add(wids['bgr_width'], dcol=2)
pdet.Add(wids['bgr_show'])
pdet.pack()
# filters section
bx = Button(pflt, 'Customize Filter List', size=(150, -1),
action = self.onEditFilters)
bx.Disable()
pflt.Add(HLine(pflt, size=(550, 3)), dcol=6)
pflt.AddText(' Filters :', colour='#880000', dcol=3, newrow=True)
pflt.Add(bx, dcol=3)
pflt.AddManyText((' filter', 'material',
'thickness (mm)', 'vary thickness'), style=CEN, newrow=True)
opts = dict(size=(100, -1), min_val=0, digits=3, increment=0.010)
for i in range(1, NFILTERS+1):
t = 'filt%d' % i
wids['%s_mat'%t] = Choice(pflt, choices=self.Filter_Materials, default=0,
size=(125, -1),
action=partial(self.onFilterMaterial, index=i))
wids['%s_thk'%t] = FloatSpin(pflt, value=0.0, **opts)
wids['%s_var'%t] = VarChoice(pflt, default=0)
pflt.AddText(' %i' % (i), newrow=True)
pflt.Add(wids['%s_mat' % t])
pflt.Add(wids['%s_thk' % t])
pflt.Add(wids['%s_var' % t])
pflt.Add(HLine(pflt, size=(550, 3)), dcol=6, newrow=True)
pflt.pack()
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(pdet)
sizer.Add(pflt)
pack(main, sizer)
return main
def createEpicsPanel(self):
pane = wx.Panel(self, name='epics panel')
psizer = wx.GridBagSizer(4, 12) # wx.BoxSizer(wx.HORIZONTAL)
btnpanel = wx.Panel(pane, name='buttons')
nmca = self.nmca
NPERROW = 6
self.SetFont(Font(9))
if self.det_type.lower().startswith('me-4') and nmca < 5:
btnsizer = wx.GridBagSizer(2, 2)
else:
btnsizer = wx.GridBagSizer(
int((nmca + NPERROW - 2) / (1.0 * NPERROW)), NPERROW)
style = wx.ALIGN_LEFT | wx.ALIGN_CENTER_VERTICAL
rstyle = wx.ALIGN_RIGHT | wx.ALIGN_CENTER_VERTICAL
bkg_choices = ['None']
psizer.Add(SimpleText(pane, ' MCAs: '), (0, 0), (1, 1), style, 1)
for i in range(1, 1 + nmca):
bkg_choices.append("%i" % i)
b = Button(btnpanel,
'%i' % i,
size=(30, 25),
action=partial(self.onSelectDet, index=i))
self.wids['det%i' % i] = b
loc = divmod(i - 1, NPERROW)
if self.det_type.lower().startswith('me-4') and nmca < NPERROW - 1:
loc = self.me4_layout[i - 1]
btnsizer.Add(b, loc, (1, 1), style, 1)
pack(btnpanel, btnsizer)
nrows = 1 + loc[0]
if self.det_type.lower().startswith('me-4') and nmca < 5:
nrows = 2
psizer.Add(btnpanel, (0, 1), (nrows, 1), style, 1)
self.wids['det_status'] = SimpleText(pane,
' ',
size=(120, -1),
style=style)
self.wids['deadtime'] = SimpleText(pane,
' ',
size=(120, -1),
style=style)
self.wids['bkg_det'] = Choice(pane,
size=(75, -1),
choices=bkg_choices,
action=self.onSelectDet)
self.wids['dwelltime'] = FloatCtrl(pane,
value=0.0,
precision=1,
minval=0,
size=(80, -1),
act_on_losefocus=True,
action=self.onSetDwelltime)
self.wids['elapsed'] = SimpleText(pane,
' ',
size=(80, -1),
style=style)
b1 = Button(pane, 'Start', size=(90, 25), action=self.onStart)
b2 = Button(pane, 'Stop', size=(90, 25), action=self.onStop)
b3 = Button(pane, 'Erase', size=(90, 25), action=self.onErase)
b4 = Button(pane,
'Continuous',
size=(90, 25),
action=partial(self.onStart, dtime=0))
bkg_lab = SimpleText(pane, 'Background MCA:', size=(150, -1))
pre_lab = SimpleText(pane, 'Preset Time (s):', size=(125, -1))
ela_lab = SimpleText(pane, 'Elapsed Time (s):', size=(125, -1))
sta_lab = SimpleText(pane, 'Status :', size=(100, -1))
dea_lab = SimpleText(pane, '% Deadtime:', size=(100, -1))
psizer.Add(bkg_lab, (0, 2), (1, 1), style, 1)
psizer.Add(self.wids['bkg_det'], (1, 2), (1, 1), style, 1)
psizer.Add(pre_lab, (0, 3), (1, 1), style, 1)
psizer.Add(ela_lab, (1, 3), (1, 1), style, 1)
psizer.Add(self.wids['dwelltime'], (0, 4), (1, 1), style, 1)
psizer.Add(self.wids['elapsed'], (1, 4), (1, 1), style, 1)
psizer.Add(b1, (0, 5), (1, 1), style, 1)
psizer.Add(b4, (0, 6), (1, 1), style, 1)
psizer.Add(b2, (1, 5), (1, 1), style, 1)
psizer.Add(b3, (1, 6), (1, 1), style, 1)
psizer.Add(sta_lab, (0, 7), (1, 1), style, 1)
psizer.Add(self.wids['det_status'], (0, 8), (1, 1), style, 1)
psizer.Add(dea_lab, (1, 7), (1, 1), style, 1)
psizer.Add(self.wids['deadtime'], (1, 8), (1, 1), style, 1)
pack(pane, psizer)
# pane.SetMinSize((500, 53))
self.det.connect_displays(status=self.wids['det_status'],
elapsed=self.wids['elapsed'],
deadtime=self.wids['deadtime'])
wx.CallAfter(self.onSelectDet, index=1, init=True)
self.timer_counter = 0
self.mca_timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.UpdateData, self.mca_timer)
self.mca_timer.Start(100)
return pane
def createControlPanel(self):
ctrlpanel = wx.Panel(self, name='Ctrl Panel')
ptable = PeriodicTablePanel(ctrlpanel, onselect=self.onShowLines,
tooltip_msg='Select Element for KLM Lines')
self.wids['ptable'] = ptable
labstyle = wx.ALIGN_LEFT|wx.ALIGN_BOTTOM|wx.EXPAND
ctrlstyle = wx.ALIGN_LEFT|wx.ALIGN_BOTTOM
txtstyle=wx.ALIGN_LEFT|wx.ST_NO_AUTORESIZE|wx.TE_PROCESS_ENTER
Font9 = Font(9)
Font10 = Font(10)
Font11 = Font(11)
#
arrowpanel = wx.Panel(ctrlpanel)
ssizer = wx.BoxSizer(wx.HORIZONTAL)
for wname, dname in (('uparrow', 'up'),
('leftarrow', 'left'),
('rightarrow', 'right'),
('downarrow', 'down')):
self.wids[wname] = wx.BitmapButton(arrowpanel, -1,
get_icon(wname),
size=(25, 25),
style=wx.NO_BORDER)
self.wids[wname].Bind(wx.EVT_BUTTON,
partial(ptable.onKey, name=dname))
ssizer.Add(self.wids[wname], 0, wx.EXPAND|wx.ALL)
self.wids['kseries'] = Check(arrowpanel, ' K ', action=self.onKLM)
self.wids['lseries'] = Check(arrowpanel, ' L ', action=self.onKLM)
self.wids['mseries'] = Check(arrowpanel, ' M ', action=self.onKLM)
self.wids['holdbtn'] = wx.ToggleButton(arrowpanel, -1, 'Hold ', size=(65, 25))
self.wids['holdbtn'].Bind(wx.EVT_TOGGLEBUTTON, self.onToggleHold)
ssizer.Add(txt(arrowpanel, ' '), 0, wx.EXPAND|wx.ALL, 0)
ssizer.Add(self.wids['holdbtn'], 0, wx.EXPAND|wx.ALL, 2)
ssizer.Add(self.wids['kseries'], 0, wx.EXPAND|wx.ALL, 0)
ssizer.Add(self.wids['lseries'], 0, wx.EXPAND|wx.ALL, 0)
ssizer.Add(self.wids['mseries'], 0, wx.EXPAND|wx.ALL, 0)
pack(arrowpanel, ssizer)
# roi section...
rsizer = wx.GridBagSizer(4, 6)
roipanel = wx.Panel(ctrlpanel, name='ROI Panel')
self.wids['roilist'] = wx.ListBox(roipanel, size=(135, 120))
self.wids['roilist'].Bind(wx.EVT_LISTBOX, self.onROI)
self.wids['roilist'].SetMinSize((135, 120))
self.wids['roiname'] = wx.TextCtrl(roipanel, -1, '', size=(150, -1))
#
roibtns= wx.Panel(roipanel, name='ROIButtons')
zsizer = wx.BoxSizer(wx.HORIZONTAL)
z1 = Button(roibtns, 'Add', size=(70, 30), action=self.onNewROI)
z2 = Button(roibtns, 'Delete', size=(70, 30), action=self.onConfirmDelROI)
z3 = Button(roibtns, 'Rename', size=(70, 30), action=self.onRenameROI)
zsizer.Add(z1, 0, wx.EXPAND|wx.ALL, 0)
zsizer.Add(z2, 0, wx.EXPAND|wx.ALL, 0)
zsizer.Add(z3, 0, wx.EXPAND|wx.ALL, 0)
pack(roibtns, zsizer)
rt1 = txt(roipanel, ' Channels:', size=75, font=Font9)
rt2 = txt(roipanel, ' Energy:', size=75, font=Font9)
rt3 = txt(roipanel, ' Cen/Wid:', size=75, font=Font9)
m = ''
self.wids['roi_msg1'] = txt(roipanel, m, size=135, font=Font9)
self.wids['roi_msg2'] = txt(roipanel, m, size=135, font=Font9)
self.wids['roi_msg3'] = txt(roipanel, m, size=135, font=Font9)
rsizer.Add(txt(roipanel, ' Regions of Interest:', size=125, font=Font11),
(0, 0), (1, 3), labstyle)
rsizer.Add(self.wids['roiname'], (1, 0), (1, 3), labstyle)
rsizer.Add(roibtns, (2, 0), (1, 3), labstyle)
rsizer.Add(rt1, (3, 0), (1, 1), LEFT)
rsizer.Add(rt2, (4, 0), (1, 1), LEFT)
rsizer.Add(rt3, (5, 0), (1, 1), LEFT)
rsizer.Add(self.wids['roi_msg1'], (3, 1), (1, 2), labstyle)
rsizer.Add(self.wids['roi_msg2'], (4, 1), (1, 2), labstyle)
rsizer.Add(self.wids['roi_msg3'], (5, 1), (1, 2), labstyle)
rsizer.Add(self.wids['roilist'], (0, 3), (6, 1),
wx.EXPAND|wx.ALL|wx.ALIGN_RIGHT)
rsizer.SetHGap(1)
pack(roipanel, rsizer)
# end roi section
# y scale
yscalepanel = wx.Panel(ctrlpanel, name='YScalePanel')
ysizer = wx.BoxSizer(wx.HORIZONTAL)
ytitle = txt(yscalepanel, ' Y Axis:', font=Font10, size=80)
yspace = txt(yscalepanel, ' ', font=Font10, size=20)
ylog = Choice(yscalepanel, size=(80, 30), choices=['log', 'linear'],
action=self.onLogLinear)
yaxis = Check(yscalepanel, ' Show Y Scale ', action=self.onYAxis,
default=False)
self.wids['show_yaxis'] = yaxis
ysizer.Add(ytitle, 0, wx.ALIGN_CENTER_VERTICAL|wx.ALL, 0)
ysizer.Add(ylog, 0, wx.EXPAND|wx.ALL, 0)
ysizer.Add(yspace, 0, wx.EXPAND|wx.ALL, 0)
ysizer.Add(yaxis, 0, wx.EXPAND|wx.ALL, 0)
pack(yscalepanel, ysizer)
# zoom buttons
zoompanel = wx.Panel(ctrlpanel, name='ZoomPanel')
zsizer = wx.BoxSizer(wx.HORIZONTAL)
z1 = Button(zoompanel, 'Zoom In', size=(80, 30), action=self.onZoomIn)
z2 = Button(zoompanel, 'Zoom Out', size=(80, 30), action=self.onZoomOut)
p1 = Button(zoompanel, 'Pan Lo', size=(75, 30), action=self.onPanLo)
p2 = Button(zoompanel, 'Pan Hi', size=(75, 30), action=self.onPanHi)
zsizer.Add(p1, 0, wx.EXPAND|wx.ALL, 0)
zsizer.Add(p2, 0, wx.EXPAND|wx.ALL, 0)
zsizer.Add(z1, 0, wx.EXPAND|wx.ALL, 0)
zsizer.Add(z2, 0, wx.EXPAND|wx.ALL, 0)
pack(zoompanel, zsizer)
#
self.wids['xray_lines'] = None
if HAS_DV:
dvstyle = dv.DV_SINGLE|dv.DV_VERT_RULES|dv.DV_ROW_LINES
xlines = dv.DataViewListCtrl(ctrlpanel, style=dvstyle)
self.wids['xray_lines'] = xlines
xlines.AppendTextColumn('Line ', width=55)
xlines.AppendTextColumn('Energy(keV) ', width=110)
xlines.AppendTextColumn('Strength ', width=85)
xlines.AppendTextColumn('Levels ', width=75)
for col in (0, 1, 2, 3):
this = xlines.Columns[col]
this.Sortable = True
align = RIGHT
if col in (0, 3): align = wx.ALIGN_LEFT
this.Alignment = this.Renderer.Alignment = align
xlines.SetMinSize((300, 240))
xlines.Bind(dv.EVT_DATAVIEW_SELECTION_CHANGED,
self.onSelectXrayLine)
# main layout
# may have to adjust comparison....
store = xlines.GetStore()
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(roipanel, 0, labstyle)
sizer.Add(lin(ctrlpanel, 195), 0, labstyle)
sizer.Add(yscalepanel, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL)
sizer.Add(zoompanel, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL)
sizer.Add(lin(ctrlpanel, 195), 0, labstyle)
sizer.Add(ptable, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL, 4)
sizer.Add(arrowpanel, 0, labstyle)
sizer.Add(lin(ctrlpanel, 195), 0, labstyle)
if self.wids['xray_lines'] is not None:
sizer.Add(xlines, 0, wx.ALIGN_CENTER|wx.GROW|wx.ALL|wx.EXPAND)
pack(ctrlpanel, sizer)
return ctrlpanel
def build_display(self):
self.mod_nb = flat_nb.FlatNotebook(self, -1, agwStyle=FNB_STYLE)
self.mod_nb.SetTabAreaColour(wx.Colour(250,250,250))
self.mod_nb.SetActiveTabColour(wx.Colour(254,254,195))
self.mod_nb.SetNonActiveTabTextColour(wx.Colour(10,10,128))
self.mod_nb.SetActiveTabTextColour(wx.Colour(128,0,0))
self.param_panel = AllParamsPanel(self, controller=self.controller)
self.mod_nb.AddPage(self.param_panel, 'Parameters', True)
row1 = wx.Panel(self)
rsizer = wx.BoxSizer(wx.HORIZONTAL)
xmin_sel = BitmapButton(row1, get_icon('plus'),
action=partial(self.on_selpoint, opt='xmin'),
tooltip='use last point selected from plot')
xmax_sel = BitmapButton(row1, get_icon('plus'),
action=partial(self.on_selpoint, opt='xmax'),
tooltip='use last point selected from plot')
opts = {'size': (70, -1), 'gformat': True}
self.xmin = FloatCtrl(row1, value=-np.inf, **opts)
self.xmax = FloatCtrl(row1, value=np.inf, **opts)
rsizer.Add(SimpleText(row1, 'Fit X Range: [ '), 0, LCEN, 3)
rsizer.Add(xmin_sel, 0, LCEN, 3)
rsizer.Add(self.xmin, 0, LCEN, 3)
rsizer.Add(SimpleText(row1, ' : '), 0, LCEN, 3)
rsizer.Add(xmax_sel, 0, LCEN, 3)
rsizer.Add(self.xmax, 0, LCEN, 3)
rsizer.Add(SimpleText(row1, ' ] '), 0, LCEN, 3)
rsizer.Add(Button(row1, 'Full Data Range', size=(100, -1),
action=self.onResetRange), 0, LCEN, 3)
pack(row1, rsizer)
row2 = wx.Panel(self)
rsizer = wx.BoxSizer(wx.HORIZONTAL)
self.plot_comps = Check(row2, label='Plot Components?',
default=True, size=(150, -1))
rsizer.Add(Button(row2, 'Run Fit',
size=(150, -1), action=self.onRunFit), 0, RCEN, 3)
rsizer.Add(Button(row2, 'Save Fit',
size=(150, -1), action=self.onSaveFit), 0, LCEN, 3)
rsizer.Add(Button(row2, 'Plot Current Model',
size=(150, -1), action=self.onShowModel), 0, LCEN, 3)
rsizer.Add(self.plot_comps, 0, LCEN, 3)
pack(row2, rsizer)
row3 = wx.Panel(self)
rsizer = wx.BoxSizer(wx.HORIZONTAL)
rsizer.Add(SimpleText(row3, ' Add Model: '), 0, LCEN, 3)
rsizer.Add(Choice(row3, size=(150, -1), choices=PeakChoices,
action=self.addModel), 0, LCEN, 3)
rsizer.Add(Choice(row3, size=(150, -1), choices=StepChoices,
action=partial(self.addModel, is_step=True)), 0, LCEN, 3)
rsizer.Add(Choice(row3, size=(150, -1), choices=ModelChoices,
action=self.addModel), 0, LCEN, 3)
pack(row3, rsizer)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.AddMany([(row2, 0, LCEN, 5),
(row1, 0, LCEN, 5),
(row3, 0, LCEN, 5),
((5,5), 0, LCEN, 5),
(HLine(self, size=(550, 2)), 0, LCEN, 10),
((5,5), 0, LCEN, 0),
(self.mod_nb, 1, LCEN|wx.GROW, 10)])
pack(self, sizer)
def build_display(self):
self.mod_nb = flat_nb.FlatNotebook(self, -1, agwStyle=FNB_STYLE)
self.mod_nb.SetTabAreaColour(wx.Colour(250, 250, 250))
self.mod_nb.SetActiveTabColour(wx.Colour(254, 254, 195))
self.mod_nb.SetNonActiveTabTextColour(wx.Colour(10, 10, 128))
self.mod_nb.SetActiveTabTextColour(wx.Colour(128, 0, 0))
self.mod_nb.Bind(wx.EVT_NOTEBOOK_PAGE_CHANGED, self.onNBChanged)
self.param_panel = AllParamsPanel(self, controller=self.controller)
# self.mod_nb.AddPage(self.param_panel, 'Parameters', True)
range_row = wx.Panel(self)
rsizer = wx.BoxSizer(wx.HORIZONTAL)
xmin_sel = BitmapButton(range_row,
get_icon('plus'),
action=partial(self.on_selpoint, opt='xmin'),
tooltip='use last point selected from plot')
xmax_sel = BitmapButton(range_row,
get_icon('plus'),
action=partial(self.on_selpoint, opt='xmax'),
tooltip='use last point selected from plot')
opts = {'size': (70, -1), 'gformat': True}
self.xmin = FloatCtrl(range_row, value=-np.inf, **opts)
self.xmax = FloatCtrl(range_row, value=np.inf, **opts)
rsizer.Add(SimpleText(range_row, 'Fit Range X=[ '), 0, LCEN, 3)
rsizer.Add(xmin_sel, 0, LCEN, 3)
rsizer.Add(self.xmin, 0, LCEN, 3)
rsizer.Add(SimpleText(range_row, ' : '), 0, LCEN, 3)
rsizer.Add(xmax_sel, 0, LCEN, 3)
rsizer.Add(self.xmax, 0, LCEN, 3)
rsizer.Add(SimpleText(range_row, ' ] '), 0, LCEN, 3)
rsizer.Add(
Button(range_row,
'Full Data Range',
size=(150, -1),
action=self.onResetRange), 0, LCEN, 3)
pack(range_row, rsizer)
action_row = wx.Panel(self)
rsizer = wx.BoxSizer(wx.HORIZONTAL)
self.plot_comps = Check(action_row,
label='Plot Components?',
default=True,
size=(150, -1))
rsizer.Add(
Button(action_row, 'Run Fit', size=(100, -1),
action=self.onRunFit), 0, RCEN, 3)
savebtn = Button(action_row,
'Save Fit',
size=(100, -1),
action=self.onSaveFit)
savebtn.Disable()
rsizer.Add(savebtn, 0, LCEN, 3)
rsizer.Add(
Button(action_row,
'Plot Current Model',
size=(150, -1),
action=self.onShowModel), 0, LCEN, 3)
rsizer.Add(self.plot_comps, 0, LCEN, 3)
pack(action_row, rsizer)
models_row = wx.Panel(self)
rsizer = wx.BoxSizer(wx.HORIZONTAL)
self.model_choice = Choice(models_row,
size=(200, -1),
choices=ModelChoices['peaks'],
action=self.addModel)
rsizer.Add(SimpleText(models_row, ' Add Model Type: '), 0, LCEN, 3)
rsizer.Add(
Choice(models_row,
size=(100, -1),
choices=ModelTypes,
action=self.onModelTypes), 0, LCEN, 3)
rsizer.Add(SimpleText(models_row, ' Model: '), 0, LCEN, 3)
rsizer.Add(self.model_choice, 0, LCEN, 3)
pack(models_row, rsizer)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.AddMany([(range_row, 0, LCEN, 4), ((9, 9), 0, LCEN, 4),
(models_row, 0, LCEN, 4), ((9, 9), 0, LCEN, 4),
(action_row, 0, LCEN, 4), ((9, 9), 0, LCEN, 4),
(HLine(self, size=(550, 3)), 0, LCEN, 4),
((10, 10), 0, LCEN, 2),
(self.mod_nb, 1, LCEN | wx.GROW, 10)])
pack(self, sizer)
def createDetailsPanel(self, parent):
mainpanel = wx.Panel(parent)
mainsizer = wx.BoxSizer(wx.VERTICAL)
panel = wx.Panel(mainpanel)
sizer = wx.GridBagSizer(8, 7)
self.title = SimpleText(panel, 'initializing...')
ir = 0
sizer.Add(self.title, (ir, 0), (1, 6), LCEN, 2)
# x-axis
self.xarr = Choice(panel,
choices=[],
action=self.onColumnChoices,
size=(120, -1))
self.xop = Choice(panel,
choices=('', 'log'),
action=self.onColumnChoices,
size=(90, -1))
ir += 1
sizer.Add(SimpleText(panel, 'X = '), (ir, 0), (1, 1), CEN, 0)
sizer.Add(self.xop, (ir, 1), (1, 1), CEN, 0)
sizer.Add(SimpleText(panel, '('), (ir, 2), (1, 1), CEN, 0)
sizer.Add(self.xarr, (ir, 3), (1, 1), RCEN, 0)
sizer.Add(SimpleText(panel, ')'), (ir, 4), (1, 1), CEN, 0)
self.yops = []
self.yarr = []
opts = {
'choices': [],
'size': (120, -1),
'action': self.onColumnChoices
}
for i in range(3):
self.yarr.append(Choice(panel, **opts))
for opts, sel, siz in ((PRE_OPS, 0, 90), (ARR_OPS, 3, 50), (ARR_OPS, 3,
50)):
w1 = Choice(panel,
choices=opts,
action=self.onColumnChoices,
size=(siz, -1))
w1.SetSelection(sel)
self.yops.append(w1)
ir += 1
label = 'Y = '
sizer.Add(SimpleText(panel, label), (ir, 0), (1, 1), CEN, 0)
sizer.Add(self.yops[0], (ir, 1), (1, 1), CEN, 0)
sizer.Add(SimpleText(panel, '[('), (ir, 2), (1, 1), CEN, 0)
sizer.Add(self.yarr[0], (ir, 3), (1, 1), CEN, 0)
sizer.Add(self.yops[1], (ir, 4), (1, 1), CEN, 0)
sizer.Add(self.yarr[1], (ir, 5), (1, 1), CEN, 0)
sizer.Add(SimpleText(panel, ')'), (ir, 6), (1, 1), LCEN, 0)
ir += 1
sizer.Add(self.yops[2], (ir, 4), (1, 1), CEN, 0)
sizer.Add(self.yarr[2], (ir, 5), (1, 1), CEN, 0)
sizer.Add(SimpleText(panel, ']'), (ir, 6), (1, 1), LCEN, 0)
self.use_deriv = Check(panel,
default=False,
label='Use Derivative?',
action=self.onColumnChoices)
self.dtcorr = Check(panel,
default=True,
label='correct deadtime?',
action=self.onColumnChoices)
ir += 1
sizer.Add(self.use_deriv, (ir, 0), (1, 3), LCEN, 0)
sizer.Add(self.dtcorr, (ir, 3), (1, 3), LCEN, 0)
pack(panel, sizer)
self.nb = flat_nb.FlatNotebook(mainpanel, -1, agwStyle=FNB_STYLE)
self.nb.SetTabAreaColour(wx.Colour(248, 248, 240))
self.nb.SetActiveTabColour(wx.Colour(254, 254, 195))
self.nb.SetNonActiveTabTextColour(wx.Colour(40, 40, 180))
self.nb.SetActiveTabTextColour(wx.Colour(80, 0, 0))
self.xas_panel = self.CreateXASPanel(self.nb) # mainpanel)
self.fit_panel = self.CreateFitPanel(self.nb) # mainpanel)
self.nb.AddPage(self.fit_panel, ' General Analysis ', True)
self.nb.AddPage(self.xas_panel, ' XAS Processing ', True)
mainsizer.Add(panel, 0, LCEN | wx.EXPAND, 2)
btnbox = wx.Panel(mainpanel)
btnsizer = wx.BoxSizer(wx.HORIZONTAL)
for ttl, opt in (('New Plot', 'new'), ('Over Plot (left)', 'left'),
('Over Plot (right)', 'right')):
btnsizer.Add(
Button(btnbox,
ttl,
size=(135, -1),
action=partial(self.onPlot, opt=opt)), LCEN, 1)
pack(btnbox, btnsizer)
mainsizer.Add(btnbox, 0, LCEN, 2)
mainsizer.Add(self.nb, 1, LCEN | wx.EXPAND, 2)
pack(mainpanel, mainsizer)
return mainpanel
def build_display(self):
self.SetFont(Font(10))
titleopts = dict(font=Font(11), colour='#AA0000')
xas = self.xaspanel = GridPanel(self,
ncols=4,
nrows=4,
pad=2,
itemstyle=LCEN)
self.plotone_op = Choice(xas,
choices=list(PlotOne_Choices.keys()),
action=self.onPlotOne,
size=(200, -1))
self.plotsel_op = Choice(xas,
choices=list(PlotSel_Choices.keys()),
action=self.onPlotSel,
size=(200, -1))
self.plotone_op.SetStringSelection('Normalized')
self.plotsel_op.SetStringSelection('Normalized')
plot_one = Button(xas,
'Plot This Group',
size=(150, -1),
action=self.onPlotOne)
plot_sel = Button(xas,
'Plot Selected Groups',
size=(150, -1),
action=self.onPlotSel)
self.btns = {}
opts = dict(action=self.onReprocess)
self.deconv_ewid = FloatCtrl(xas,
value=0.5,
precision=2,
minval=0,
size=(50, -1),
**opts)
self.deconv_form = Choice(xas,
choices=DECONV_OPS,
size=(100, -1),
**opts)
e0opts_panel = wx.Panel(xas)
self.xas_autoe0 = Check(e0opts_panel,
default=True,
label='auto?',
**opts)
self.xas_showe0 = Check(e0opts_panel,
default=True,
label='show?',
**opts)
sx = wx.BoxSizer(wx.HORIZONTAL)
sx.Add(self.xas_autoe0, 0, LCEN, 4)
sx.Add(self.xas_showe0, 0, LCEN, 4)
pack(e0opts_panel, sx)
self.xas_autostep = Check(xas, default=True, label='auto?', **opts)
for name in ('e0', 'pre1', 'pre2', 'nor1', 'nor2'):
bb = BitmapButton(xas,
get_icon('plus'),
action=partial(self.on_selpoint, opt=name),
tooltip='use last point selected from plot')
self.btns[name] = bb
opts['size'] = (50, -1)
self.xas_vict = Choice(xas, choices=('0', '1', '2', '3'), **opts)
self.xas_nnor = Choice(xas, choices=('0', '1', '2', '3'), **opts)
self.xas_vict.SetSelection(1)
self.xas_nnor.SetSelection(1)
opts.update({'size': (75, -1), 'precision': 1})
self.xas_pre1 = FloatCtrl(xas, value=-np.inf, **opts)
self.xas_pre2 = FloatCtrl(xas, value=-30, **opts)
self.xas_nor1 = FloatCtrl(xas, value=50, **opts)
self.xas_nor2 = FloatCtrl(xas, value=np.inf, **opts)
opts = {'size': (75, -1), 'gformat': True}
self.xas_e0 = FloatCtrl(xas, value=0, action=self.onSet_XASE0, **opts)
self.xas_step = FloatCtrl(xas,
value=0,
action=self.onSet_XASStep,
**opts)
saveconf = Button(xas,
'Save as Default Settings',
size=(200, -1),
action=self.onSaveConfigBtn)
def CopyBtn(name):
return Button(xas,
'Copy',
size=(50, -1),
action=partial(self.onCopyParam, name))
xas.Add(SimpleText(xas, ' XAS Pre-edge subtraction and Normalization',
**titleopts),
dcol=6)
xas.Add(SimpleText(xas, ' Copy to Selected Groups?'),
style=RCEN,
dcol=3)
xas.Add(plot_sel, newrow=True)
xas.Add(self.plotsel_op, dcol=6)
xas.Add(plot_one, newrow=True)
xas.Add(self.plotone_op, dcol=6)
xas.Add((10, 10))
xas.Add(CopyBtn('plotone_op'), style=RCEN)
xas.Add(SimpleText(xas, 'E0 : '), newrow=True)
xas.Add(self.btns['e0'])
xas.Add(self.xas_e0)
xas.Add(e0opts_panel, dcol=4)
xas.Add((10, 1))
xas.Add(CopyBtn('xas_e0'), style=RCEN)
xas.Add(SimpleText(xas, 'Edge Step: '), newrow=True)
xas.Add((10, 1))
xas.Add(self.xas_step)
xas.Add(self.xas_autostep, dcol=3)
xas.Add((10, 1))
xas.Add((10, 1))
xas.Add(CopyBtn('xas_step'), style=RCEN)
xas.Add(SimpleText(xas, 'Pre-edge range: '), newrow=True)
xas.Add(self.btns['pre1'])
xas.Add(self.xas_pre1)
xas.Add(SimpleText(xas, ':'))
xas.Add(self.btns['pre2'])
xas.Add(self.xas_pre2)
xas.Add(SimpleText(xas, 'Victoreen:'))
xas.Add(self.xas_vict)
xas.Add(CopyBtn('xas_pre'), style=RCEN)
xas.Add(SimpleText(xas, 'Normalization range: '), newrow=True)
xas.Add(self.btns['nor1'])
xas.Add(self.xas_nor1)
xas.Add(SimpleText(xas, ':'))
xas.Add(self.btns['nor2'])
xas.Add(self.xas_nor2)
xas.Add(SimpleText(xas, 'Poly Order:'))
xas.Add(self.xas_nnor)
xas.Add(CopyBtn('xas_norm'), style=RCEN)
xas.Add(SimpleText(xas, ' Deconvolution:'), newrow=True)
xas.Add(self.deconv_form, dcol=5)
xas.Add(SimpleText(xas, 'Energy width:'))
xas.Add(self.deconv_ewid)
xas.Add(CopyBtn('deconv'), style=RCEN)
xas.Add(saveconf, dcol=6, newrow=True)
xas.pack()
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add((5, 5), 0, LCEN, 3)
sizer.Add(HLine(self, size=(550, 2)), 0, LCEN, 3)
sizer.Add(xas, 0, LCEN, 3)
sizer.Add((5, 5), 0, LCEN, 3)
sizer.Add(HLine(self, size=(550, 2)), 0, LCEN, 3)
pack(self, sizer)
def __init__(self, parent, param, precision=4, vary=None, **kws):
self.param = param
title = " Parameter: %s " % (param.name)
wx.Dialog.__init__(self, parent, wx.ID_ANY, title=title)
panel = GridPanel(self)
self.SetFont(parent.GetFont())
if vary is None:
vary = 0
if param.vary:
vary = 1
elif param.expr is not None:
vary = 2
minval, maxval = param.min, param.max
stderr, expr = param.stderr, param.expr
sminval = "%s" % minval
smaxval = "%s" % maxval
if minval in (None, 'None', -np.inf): minval = -np.inf
if maxval in (None, 'None', np.inf): maxval = np.inf
if stderr is None: stderr = ''
if expr is None: expr = ''
self.wids = Empty()
self.wids.vary = Choice(panel, choices=VARY_CHOICES,
action=self.onVaryChoice, size=(110, -1))
self.wids.vary.SetSelection(vary)
self.wids.val = FloatCtrl(panel, value=param.value, size=(100, -1),
precision=precision,
minval=minval, maxval=maxval)
self.wids.min = FloatCtrl(panel, value=minval, size=(100, -1))
self.wids.max = FloatCtrl(panel, value=maxval, size=(100, -1))
self.wids.expr = wx.TextCtrl(panel, value=expr, size=(300, -1))
self.wids.err = wx.StaticText(panel, label="%s" % stderr)
SetTip(self.wids.expr, "Mathematical expression to calcutate value")
btnsizer = wx.StdDialogButtonSizer()
ok_btn = wx.Button(panel, wx.ID_OK)
ok_btn.SetDefault()
btnsizer.AddButton(ok_btn)
btnsizer.AddButton(wx.Button(panel, wx.ID_CANCEL))
btnsizer.Realize()
panel.AddText(' Name:', style=LEFT)
panel.AddText(param.name, style=LEFT)
panel.AddText(' Type:', style=LEFT)
panel.Add(self.wids.vary, style=LEFT)
panel.AddText(' Value:', style=LEFT, newrow=True)
panel.Add(self.wids.val, style=LEFT)
panel.AddText(' Std Error:', style=LEFT)
panel.Add(self.wids.err, style=LEFT)
panel.AddText(' Min Value:', style=LEFT, newrow=True)
panel.Add(self.wids.min, style=LEFT)
panel.AddText(' Max Value:', style=LEFT)
panel.Add(self.wids.max, style=LEFT)
panel.AddText(' Constraint:', style=LEFT, newrow=True)
panel.Add(self.wids.expr, style=LEFT, dcol=3)
panel.Add(HLine(panel, size=(375, 2)), dcol=4, newrow=True)
panel.Add(btnsizer, dcol=4, newrow=True, style=LEFT)
panel.pack()
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(panel, 0, 0, 25)
self.onVaryChoice()
pack(self, sizer)
bsize = self.GetBestSize()
self.SetSize((bsize[0]+10, bsize[1]+10))
def __init__(self,
parent,
filename=None,
read_ok_cb=None,
size=(725, 450),
_larch=None):
self.parent = parent
self.filename = filename
self.larch = _larch
self.read_ok_cb = read_ok_cb
self.colors = GUIColors()
wx.Frame.__init__(self, parent, -1, size=size, style=FRAMESTYLE)
splitter = wx.SplitterWindow(self, style=wx.SP_LIVE_UPDATE)
splitter.SetMinimumPaneSize(200)
leftpanel = wx.Panel(splitter)
ltop = wx.Panel(leftpanel)
sel_none = Button(ltop,
'Select None',
size=(100, 30),
action=self.onSelNone)
sel_all = Button(ltop,
'Select All',
size=(100, 30),
action=self.onSelAll)
sel_imp = Button(ltop,
'Import Selected Groups',
size=(200, 30),
action=self.onOK)
self.select_imported = sel_imp
self.select_imported.Disable()
self.grouplist = FileCheckList(leftpanel,
select_action=self.onShowGroup)
self.grouplist.SetBackgroundColour(wx.Colour(255, 255, 255))
tsizer = wx.GridBagSizer(2, 2)
tsizer.Add(sel_all, (0, 0), (1, 1), LCEN, 0)
tsizer.Add(sel_none, (0, 1), (1, 1), LCEN, 0)
tsizer.Add(sel_imp, (1, 0), (1, 2), LCEN, 0)
pack(ltop, tsizer)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(ltop, 0, LCEN | wx.GROW, 1)
sizer.Add(self.grouplist, 1, LCEN | wx.GROW | wx.ALL, 1)
pack(leftpanel, sizer)
# right hand side
rightpanel = wx.Panel(splitter)
self.SetTitle("Reading Athena Project '%s'" % self.filename)
self.title = SimpleText(rightpanel,
self.filename,
font=Font(13),
colour=self.colors.title,
style=LCEN)
self.plotpanel = PlotPanel(rightpanel, messenger=self.plot_messages)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(self.title, 0, LCEN, 2)
sizer.Add(self.plotpanel, 0, LCEN, 2)
pack(rightpanel, sizer)
splitter.SplitVertically(leftpanel, rightpanel, 1)
self.statusbar = self.CreateStatusBar(2, 0)
self.statusbar.SetStatusWidths([-3, -1])
statusbar_fields = [self.filename, ""]
for i in range(len(statusbar_fields)):
self.statusbar.SetStatusText(statusbar_fields[i], i)
self.all = read_athena(self.filename,
do_bkg=False,
do_fft=False,
with_journal=False,
_larch=_larch)
for item in dir(self.all):
self.grouplist.Append(item)
self.Show()
self.Raise()
def build_display(self):
self.mod_nb = flat_nb.FlatNotebook(self, -1, agwStyle=FNB_STYLE)
self.mod_nb.SetTabAreaColour(wx.Colour(250, 250, 250))
self.mod_nb.SetActiveTabColour(wx.Colour(254, 254, 195))
self.mod_nb.SetNonActiveTabTextColour(wx.Colour(10, 10, 128))
self.mod_nb.SetActiveTabTextColour(wx.Colour(128, 0, 0))
self.param_panel = AllParamsPanel(self, controller=self.controller)
self.mod_nb.AddPage(self.param_panel, "Parameters", True)
range_row = wx.Panel(self)
rsizer = wx.BoxSizer(wx.HORIZONTAL)
xmin_sel = BitmapButton(
range_row,
get_icon("plus"),
action=partial(self.on_selpoint, opt="xmin"),
tooltip="use last point selected from plot",
)
xmax_sel = BitmapButton(
range_row,
get_icon("plus"),
action=partial(self.on_selpoint, opt="xmax"),
tooltip="use last point selected from plot",
)
opts = {"size": (70, -1), "gformat": True}
self.xmin = FloatCtrl(range_row, value=-np.inf, **opts)
self.xmax = FloatCtrl(range_row, value=np.inf, **opts)
rsizer.Add(SimpleText(range_row, "Fit Range X=[ "), 0, LCEN, 3)
rsizer.Add(xmin_sel, 0, LCEN, 3)
rsizer.Add(self.xmin, 0, LCEN, 3)
rsizer.Add(SimpleText(range_row, " : "), 0, LCEN, 3)
rsizer.Add(xmax_sel, 0, LCEN, 3)
rsizer.Add(self.xmax, 0, LCEN, 3)
rsizer.Add(SimpleText(range_row, " ] "), 0, LCEN, 3)
rsizer.Add(Button(range_row, "Use Full Data Range", size=(150, -1), action=self.onResetRange), 0, LCEN, 3)
pack(range_row, rsizer)
action_row = wx.Panel(self)
rsizer = wx.BoxSizer(wx.HORIZONTAL)
self.plot_comps = Check(action_row, label="Plot Components?", default=True, size=(150, -1))
rsizer.Add(Button(action_row, "Run Fit", size=(100, -1), action=self.onRunFit), 0, RCEN, 3)
rsizer.Add(Button(action_row, "Save Fit", size=(100, -1), action=self.onSaveFit), 0, LCEN, 3)
rsizer.Add(Button(action_row, "Plot Current Model", size=(150, -1), action=self.onShowModel), 0, LCEN, 3)
rsizer.Add(self.plot_comps, 0, LCEN, 3)
pack(action_row, rsizer)
models_row = wx.Panel(self)
rsizer = wx.BoxSizer(wx.HORIZONTAL)
rsizer.Add(SimpleText(models_row, " Add Model: "), 0, LCEN, 3)
rsizer.Add(Choice(models_row, size=(150, -1), choices=PeakChoices, action=self.addModel), 0, LCEN, 3)
rsizer.Add(
Choice(models_row, size=(150, -1), choices=StepChoices, action=partial(self.addModel, is_step=True)),
0,
LCEN,
3,
)
rsizer.Add(Choice(models_row, size=(150, -1), choices=ModelChoices, action=self.addModel), 0, LCEN, 3)
pack(models_row, rsizer)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.AddMany(
[
(range_row, 0, LCEN, 4),
((9, 9), 0, LCEN, 4),
(models_row, 0, LCEN, 4),
((9, 9), 0, LCEN, 4),
(action_row, 0, LCEN, 4),
((9, 9), 0, LCEN, 4),
(HLine(self, size=(550, 3)), 0, LCEN, 4),
((10, 10), 0, LCEN, 2),
(self.mod_nb, 1, LCEN | wx.GROW, 10),
]
)
pack(self, sizer)
def createMainPanel(self):
splitter = wx.SplitterWindow(self, style=wx.SP_LIVE_UPDATE)
splitter.SetMinimumPaneSize(250)
leftpanel = wx.Panel(splitter)
ltop = wx.Panel(leftpanel)
def Btn(msg, x, act):
b = Button(ltop, msg, size=(x, 30), action=act)
b.SetFont(Font(10))
return b
plot_one = Btn('Plot One', 120, self.onPlotOne)
plot_sel = Btn('Plot Selected', 120, self.onPlotSel)
sel_none = Btn('Select None', 120, self.onSelNone)
sel_all = Btn('Select All', 120, self.onSelAll)
self.controller.filelist = FileCheckList(leftpanel, main=self,
select_action=self.ShowFile,
remove_action=self.RemoveFile)
self.controller.filelist.SetBackgroundColour(wx.Colour(255, 255, 255))
tsizer = wx.GridBagSizer(1, 1)
tsizer.Add(plot_one, (0, 0), (1, 1), LCEN, 2)
tsizer.Add(plot_sel, (0, 1), (1, 1), LCEN, 2)
tsizer.Add(sel_all, (1, 0), (1, 1), LCEN, 2)
tsizer.Add(sel_none, (1, 1), (1, 1), LCEN, 2)
pack(ltop, tsizer)
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(ltop, 0, LCEN|wx.GROW, 1)
sizer.Add(self.controller.filelist, 1, LCEN|wx.GROW|wx.ALL, 1)
pack(leftpanel, sizer)
# right hand side
panel = wx.Panel(splitter)
sizer = wx.BoxSizer(wx.VERTICAL)
self.title = SimpleText(panel, 'initializing...', size=(300, -1))
self.title.SetFont(Font(10))
ir = 0
sizer.Add(self.title, 0, LCEN|wx.GROW|wx.ALL, 1)
self.nb = flat_nb.FlatNotebook(panel, -1, agwStyle=FNB_STYLE)
self.nb.SetTabAreaColour(wx.Colour(250,250,250))
self.nb.SetActiveTabColour(wx.Colour(254,254,195))
self.nb.SetNonActiveTabTextColour(wx.Colour(10,10,128))
self.nb.SetActiveTabTextColour(wx.Colour(128,0,0))
panel_opts = dict(parent=self.nb, controller=self.controller)
self.proc_panel = ProcessPanel(**panel_opts)
self.fit_panel = XYFitPanel(**panel_opts)
self.nb.AddPage(self.proc_panel, ' Data Processing ', True)
self.nb.AddPage(self.fit_panel, ' Curve Fitting ', True)
sizer.Add(self.nb, 1, LCEN|wx.EXPAND, 2)
self.nb.SetSelection(0)
pack(panel, sizer)
splitter.SplitVertically(leftpanel, panel, 1)
wx.CallAfter(self.init_larch)
def CreateXASPanel(self, parent):
p = panel = wx.Panel(parent)
self.xas_autoe0 = Check(panel, default=True, label='auto?')
self.xas_showe0 = Check(panel, default=True, label='show?')
self.xas_autostep = Check(panel, default=True, label='auto?')
self.xas_op = Choice(
panel,
size=(225, -1),
choices=('Raw Data', 'Normalized', 'Derivative',
'Normalized + Derivative', 'Pre-edge subtracted',
'Raw Data With Pre-edge/Post-edge Curves'),
action=self.onXASChoice)
opts = {
'size': (95, -1),
'precision': 3
} # , 'action': self.onXASChoice}
self.xas_e0 = FloatCtrl(panel, value=0, **opts)
self.xas_step = FloatCtrl(panel, value=0, **opts)
opts['precision'] = 1
self.xas_pre1 = FloatCtrl(panel, value=-200, **opts)
self.xas_pre2 = FloatCtrl(panel, value=-30, **opts)
self.xas_nor1 = FloatCtrl(panel, value=50, **opts)
self.xas_nor2 = FloatCtrl(panel, value=-50, **opts)
opts = {
'size': (50, -1),
'choices': ('0', '1', '2', '3'),
'action': self.onXASChoice
}
self.xas_vict = Choice(panel, **opts)
self.xas_nnor = Choice(panel, **opts)
self.xas_vict.SetSelection(1)
self.xas_nnor.SetSelection(2)
sizer = wx.GridBagSizer(10, 4)
sizer.Add(SimpleText(p, 'Plot XAS as: '), (0, 0), (1, 1), LCEN)
sizer.Add(SimpleText(p, 'E0 : '), (1, 0), (1, 1), LCEN)
sizer.Add(SimpleText(p, 'Edge Step: '), (2, 0), (1, 1), LCEN)
sizer.Add(SimpleText(p, 'Pre-edge range: '), (3, 0), (1, 1), LCEN)
sizer.Add(SimpleText(p, 'Normalization range: '), (4, 0), (1, 1), LCEN)
sizer.Add(self.xas_op, (0, 1), (1, 3), LCEN)
sizer.Add(self.xas_e0, (1, 1), (1, 1), LCEN)
sizer.Add(self.xas_step, (2, 1), (1, 1), LCEN)
sizer.Add(self.xas_pre1, (3, 1), (1, 1), LCEN)
sizer.Add(SimpleText(p, ':'), (3, 2), (1, 1), LCEN)
sizer.Add(self.xas_pre2, (3, 3), (1, 1), LCEN)
sizer.Add(self.xas_nor1, (4, 1), (1, 1), LCEN)
sizer.Add(SimpleText(p, ':'), (4, 2), (1, 1), LCEN)
sizer.Add(self.xas_nor2, (4, 3), (1, 1), LCEN)
sizer.Add(self.xas_autoe0, (1, 2), (1, 2), LCEN)
sizer.Add(self.xas_showe0, (1, 4), (1, 2), LCEN)
sizer.Add(self.xas_autostep, (2, 2), (1, 2), LCEN)
sizer.Add(SimpleText(p, 'Victoreen:'), (3, 4), (1, 1), LCEN)
sizer.Add(self.xas_vict, (3, 5), (1, 1), LCEN)
sizer.Add(SimpleText(p, 'PolyOrder:'), (4, 4), (1, 1), LCEN)
sizer.Add(self.xas_nnor, (4, 5), (1, 1), LCEN)
pack(panel, sizer)
return panel
def __init__(self, parent, pos=(-1, -1)):
self.parent = parent
self.larch = parent.larch
self.lgroup = parent.lgroup
message = "Edit Column Labels for %s" % self.lgroup.filename
wx.Frame.__init__(self, None, -1, 'Edit Column Labels',
style=FRAMESTYLE)
FWID = 600
self.SetFont(Font(10))
sizer = wx.GridBagSizer(10, 5)
panel = scrolled.ScrolledPanel(self)
self.SetMinSize((600, 600))
self.colors = GUIColors()
# title row
title = SimpleText(panel, message, font=Font(13),
colour=self.colors.title, style=LCEN)
sizer.Add(title, (0, 0), (1, 3), LCEN, 5)
ir = 1
sizer.Add(SimpleText(panel, label='Column #', size=(55, -1)),
(ir, 0), (1, 1), LCEN, 2)
sizer.Add(SimpleText(panel, label='Current Label', size=(200, -1)),
(ir, 1), (1, 1), RCEN, 2)
sizer.Add(SimpleText(panel, label='New Label'),
(ir, 2), (1, 1), LCEN, 2)
ir += 1
sizer.Add(wx.StaticLine(panel, size=(FWID, 3), style=wx.LI_HORIZONTAL),
(ir, 0), (1, 4), LCEN|wx.GROW|wx.ALL, 3)
self.twids = []
for icol, clab in enumerate(self.lgroup.array_labels):
ix = SimpleText(panel, label='%i' % icol, size=(55, -1))
old = SimpleText(panel, label=clab, size=(200, -1))
new = wx.TextCtrl(panel, -1, value=clab, size=(200, -1))
self.twids.append((clab, new))
ir +=1
sizer.Add(ix, (ir, 0), (1, 1), RCEN, 2)
sizer.Add(old, (ir, 1), (1, 1), LCEN, 2)
sizer.Add(new, (ir, 2), (1, 1), LCEN, 2)
ir += 1
sizer.Add(okcancel(panel, self.onOK, self.onClose),
(ir, 0), (1, 2), LCEN, 3)
ir += 1
sizer.Add(wx.StaticLine(panel, size=(FWID, 3), style=wx.LI_HORIZONTAL),
(ir, 0), (1, 4), LCEN|wx.GROW|wx.ALL, 3)
#
pack(panel, sizer)
ftext = wx.TextCtrl(self, style=wx.TE_MULTILINE|wx.TE_READONLY,
size=(-1, 275))
try:
m = open(self.lgroup.filename, 'r')
text = m.read()
m.close()
except:
text = "The file '%s'\n was not found" % self.lgroup.filename
ftext.SetValue(text)
ftext.SetFont(Font(9))
mainsizer = wx.BoxSizer(wx.VERTICAL)
mainsizer.Add(panel, 0, wx.GROW|wx.ALL, 2)
mainsizer.Add(ftext, 1, LCEN|wx.GROW, 2)
pack(self, mainsizer)
self.Show()
self.Raise()
def createControlPanel(self):
ctrlpanel = wx.Panel(self, name='Ctrl Panel')
ptable = PeriodicTablePanel(ctrlpanel, onselect=self.onShowLines,
tooltip_msg='Select Element for KLM Lines')
self.wids['ptable'] = ptable
labstyle = wx.ALIGN_LEFT|wx.ALIGN_BOTTOM|wx.EXPAND
ctrlstyle = wx.ALIGN_LEFT|wx.ALIGN_BOTTOM
txtstyle=wx.ALIGN_LEFT|wx.ST_NO_AUTORESIZE|wx.TE_PROCESS_ENTER
Font9 = Font(9)
Font10 = Font(10)
Font11 = Font(11)
#
arrowpanel = wx.Panel(ctrlpanel)
ssizer = wx.BoxSizer(wx.HORIZONTAL)
for wname, dname in (('uparrow', 'up'),
('leftarrow', 'left'),
('rightarrow', 'right'),
('downarrow', 'down')):
self.wids[wname] = wx.BitmapButton(arrowpanel, -1,
get_icon(wname),
size=(40, 40),
style=wx.NO_BORDER)
self.wids[wname].Bind(wx.EVT_BUTTON,
partial(ptable.onKey, name=dname))
ssizer.Add(self.wids[wname], 0, wx.EXPAND|wx.ALL)
self.wids['kseries'] = Check(arrowpanel, ' K ', action=self.onKLM)
self.wids['lseries'] = Check(arrowpanel, ' L ', action=self.onKLM)
self.wids['mseries'] = Check(arrowpanel, ' M ', action=self.onKLM)
ssizer.Add(txt(arrowpanel, ' '), 0, wx.EXPAND|wx.ALL, 0)
ssizer.Add(self.wids['kseries'], 0, wx.EXPAND|wx.ALL, 0)
ssizer.Add(self.wids['lseries'], 0, wx.EXPAND|wx.ALL, 0)
ssizer.Add(self.wids['mseries'], 0, wx.EXPAND|wx.ALL, 0)
pack(arrowpanel, ssizer)
# roi section...
rsizer = wx.GridBagSizer(4, 6)
roipanel = wx.Panel(ctrlpanel, name='ROI Panel')
self.wids['roilist'] = wx.ListBox(roipanel, size=(135, 120))
self.wids['roilist'].Bind(wx.EVT_LISTBOX, self.onROI)
self.wids['roilist'].SetMinSize((135, 120))
self.wids['roiname'] = wx.TextCtrl(roipanel, -1, '', size=(150, -1))
#
roibtns= wx.Panel(roipanel, name='ROIButtons')
zsizer = wx.BoxSizer(wx.HORIZONTAL)
z1 = Button(roibtns, 'Add', size=(70, 30), action=self.onNewROI)
z2 = Button(roibtns, 'Delete', size=(70, 30), action=self.onConfirmDelROI)
z3 = Button(roibtns, 'Rename', size=(70, 30), action=self.onRenameROI)
zsizer.Add(z1, 0, wx.EXPAND|wx.ALL, 0)
zsizer.Add(z2, 0, wx.EXPAND|wx.ALL, 0)
zsizer.Add(z3, 0, wx.EXPAND|wx.ALL, 0)
pack(roibtns, zsizer)
rt1 = txt(roipanel, ' Channels:', size=75, font=Font9)
rt2 = txt(roipanel, ' Energy:', size=75, font=Font9)
rt3 = txt(roipanel, ' Cen/Wid:', size=75, font=Font9)
m = ''
self.wids['roi_msg1'] = txt(roipanel, m, size=135, font=Font9)
self.wids['roi_msg2'] = txt(roipanel, m, size=135, font=Font9)
self.wids['roi_msg3'] = txt(roipanel, m, size=135, font=Font9)
rsizer.Add(txt(roipanel, ' Regions of Interest:', size=125, font=Font11),
(0, 0), (1, 3), labstyle)
rsizer.Add(self.wids['roiname'], (1, 0), (1, 3), labstyle)
rsizer.Add(roibtns, (2, 0), (1, 3), labstyle)
rsizer.Add(rt1, (3, 0), (1, 1), LEFT)
rsizer.Add(rt2, (4, 0), (1, 1), LEFT)
rsizer.Add(rt3, (5, 0), (1, 1), LEFT)
rsizer.Add(self.wids['roi_msg1'], (3, 1), (1, 2), labstyle)
rsizer.Add(self.wids['roi_msg2'], (4, 1), (1, 2), labstyle)
rsizer.Add(self.wids['roi_msg3'], (5, 1), (1, 2), labstyle)
rsizer.Add(self.wids['roilist'], (0, 3), (6, 1),
wx.EXPAND|wx.ALL|wx.ALIGN_RIGHT)
rsizer.SetHGap(1)
pack(roipanel, rsizer)
# end roi section
# y scale
yscalepanel = wx.Panel(ctrlpanel, name='YScalePanel')
ysizer = wx.BoxSizer(wx.HORIZONTAL)
ytitle = txt(yscalepanel, ' Y Axis:', font=Font10, size=80)
yspace = txt(yscalepanel, ' ', font=Font10, size=20)
ylog = Choice(yscalepanel, size=(80, 30), choices=['log', 'linear'],
action=self.onLogLinear)
yaxis = Check(yscalepanel, ' Show Y Scale ', action=self.onYAxis,
default=False)
self.wids['show_yaxis'] = yaxis
ysizer.Add(ytitle, 0, wx.ALIGN_CENTER_VERTICAL|wx.ALL, 0)
ysizer.Add(ylog, 0, wx.EXPAND|wx.ALL, 0)
ysizer.Add(yspace, 0, wx.EXPAND|wx.ALL, 0)
ysizer.Add(yaxis, 0, wx.EXPAND|wx.ALL, 0)
pack(yscalepanel, ysizer)
# zoom buttons
zoompanel = wx.Panel(ctrlpanel, name='ZoomPanel')
zsizer = wx.BoxSizer(wx.HORIZONTAL)
z1 = Button(zoompanel, 'Zoom In', size=(80, 30), action=self.onZoomIn)
z2 = Button(zoompanel, 'Zoom Out', size=(80, 30), action=self.onZoomOut)
p1 = Button(zoompanel, 'Pan Lo', size=(75, 30), action=self.onPanLo)
p2 = Button(zoompanel, 'Pan Hi', size=(75, 30), action=self.onPanHi)
zsizer.Add(p1, 0, wx.EXPAND|wx.ALL, 0)
zsizer.Add(p2, 0, wx.EXPAND|wx.ALL, 0)
zsizer.Add(z1, 0, wx.EXPAND|wx.ALL, 0)
zsizer.Add(z2, 0, wx.EXPAND|wx.ALL, 0)
pack(zoompanel, zsizer)
#
self.wids['xray_lines'] = None
if HAS_DV:
dvstyle = dv.DV_SINGLE|dv.DV_VERT_RULES|dv.DV_ROW_LINES
xlines = dv.DataViewListCtrl(ctrlpanel, style=dvstyle)
self.wids['xray_lines'] = xlines
xlines.AppendTextColumn('Line ', width=55)
xlines.AppendTextColumn('Energy(keV) ', width=110)
xlines.AppendTextColumn('Strength ', width=85)
xlines.AppendTextColumn('Levels ', width=75)
for col in (0, 1, 2, 3):
this = xlines.Columns[col]
this.Sortable = True
align = RIGHT
if col in (0, 3): align = wx.ALIGN_LEFT
this.Alignment = this.Renderer.Alignment = align
xlines.SetMinSize((300, 240))
xlines.Bind(dv.EVT_DATAVIEW_SELECTION_CHANGED,
self.onSelectXrayLine)
# main layout
# may have to adjust comparison....
store = xlines.GetStore()
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(roipanel, 0, labstyle)
sizer.Add(lin(ctrlpanel, 195), 0, labstyle)
sizer.Add(yscalepanel, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL)
sizer.Add(zoompanel, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL)
sizer.Add(lin(ctrlpanel, 195), 0, labstyle)
sizer.Add(ptable, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL, 4)
sizer.Add(arrowpanel, 0, labstyle)
sizer.Add(lin(ctrlpanel, 195), 0, labstyle)
if self.wids['xray_lines'] is not None:
sizer.Add(xlines, 0, wx.ALIGN_CENTER|wx.GROW|wx.ALL|wx.EXPAND)
pack(ctrlpanel, sizer)
return ctrlpanel
def __init__(self, parent, pos=(-1, -1)):
self.parent = parent
self.larch = parent.larch
self.lgroup = parent.lgroup
message = "Edit Column Labels for %s" % self.lgroup.filename
wx.Frame.__init__(self,
None,
-1,
'Edit Column Labels',
style=FRAMESTYLE)
FWID = 600
self.SetFont(Font(10))
sizer = wx.GridBagSizer(10, 5)
panel = scrolled.ScrolledPanel(self)
self.SetMinSize((600, 600))
self.colors = GUIColors()
# title row
title = SimpleText(panel,
message,
font=Font(13),
colour=self.colors.title,
style=LCEN)
sizer.Add(title, (0, 0), (1, 3), LCEN, 5)
ir = 1
sizer.Add(SimpleText(panel, label='Column #', size=(55, -1)), (ir, 0),
(1, 1), LCEN, 2)
sizer.Add(SimpleText(panel, label='Current Label', size=(200, -1)),
(ir, 1), (1, 1), RCEN, 2)
sizer.Add(SimpleText(panel, label='New Label'), (ir, 2), (1, 1), LCEN,
2)
ir += 1
sizer.Add(wx.StaticLine(panel, size=(FWID, 3), style=wx.LI_HORIZONTAL),
(ir, 0), (1, 4), LCEN | wx.GROW | wx.ALL, 3)
self.twids = []
for icol, clab in enumerate(self.lgroup.array_labels):
ix = SimpleText(panel, label='%i' % icol, size=(55, -1))
old = SimpleText(panel, label=clab, size=(200, -1))
new = wx.TextCtrl(panel, -1, value=clab, size=(200, -1))
self.twids.append((clab, new))
ir += 1
sizer.Add(ix, (ir, 0), (1, 1), RCEN, 2)
sizer.Add(old, (ir, 1), (1, 1), LCEN, 2)
sizer.Add(new, (ir, 2), (1, 1), LCEN, 2)
ir += 1
sizer.Add(okcancel(panel, self.onOK, self.onClose), (ir, 0), (1, 2),
LCEN, 3)
ir += 1
sizer.Add(wx.StaticLine(panel, size=(FWID, 3), style=wx.LI_HORIZONTAL),
(ir, 0), (1, 4), LCEN | wx.GROW | wx.ALL, 3)
#
pack(panel, sizer)
ftext = wx.TextCtrl(self,
style=wx.TE_MULTILINE | wx.TE_READONLY,
size=(-1, 275))
try:
m = open(self.lgroup.filename, 'r')
text = m.read()
m.close()
except:
text = "The file '%s'\n was not found" % self.lgroup.filename
ftext.SetValue(text)
ftext.SetFont(Font(9))
mainsizer = wx.BoxSizer(wx.VERTICAL)
mainsizer.Add(panel, 0, wx.GROW | wx.ALL, 2)
mainsizer.Add(ftext, 1, LCEN | wx.GROW, 2)
pack(self, mainsizer)
self.Show()
self.Raise()
def createDetailsPanel(self, parent):
mainpanel = wx.Panel(parent)
mainsizer = wx.BoxSizer(wx.VERTICAL)
panel = wx.Panel(mainpanel)
sizer = wx.GridBagSizer(8, 7)
self.title = SimpleText(panel, 'initializing...')
ir = 0
sizer.Add(self.title, (ir, 0), (1, 6), LCEN, 2)
# x-axis
self.xarr = Choice(panel, choices=[],
action=self.onColumnChoices, size=(120, -1))
self.xop = Choice(panel, choices=('', 'log'),
action=self.onColumnChoices, size=(90, -1))
ir += 1
sizer.Add(SimpleText(panel, 'X = '), (ir, 0), (1, 1), CEN, 0)
sizer.Add(self.xop, (ir, 1), (1, 1), CEN, 0)
sizer.Add(SimpleText(panel, '('), (ir, 2), (1, 1), CEN, 0)
sizer.Add(self.xarr, (ir, 3), (1, 1), RCEN, 0)
sizer.Add(SimpleText(panel, ')'), (ir, 4), (1, 1), CEN, 0)
self.yops = []
self.yarr = []
opts= {'choices':[], 'size':(120, -1), 'action':self.onColumnChoices}
for i in range(3):
self.yarr.append(Choice(panel, **opts))
for opts, sel, siz in ((PRE_OPS, 0, 90),
(ARR_OPS, 3, 50), (ARR_OPS, 3, 50)):
w1 = Choice(panel, choices=opts, action=self.onColumnChoices,
size=(siz, -1))
w1.SetSelection(sel)
self.yops.append(w1)
ir += 1
label = 'Y = '
sizer.Add(SimpleText(panel, label), (ir, 0), (1, 1), CEN, 0)
sizer.Add(self.yops[0], (ir, 1), (1, 1), CEN, 0)
sizer.Add(SimpleText(panel, '[('), (ir, 2), (1, 1), CEN, 0)
sizer.Add(self.yarr[0], (ir, 3), (1, 1), CEN, 0)
sizer.Add(self.yops[1], (ir, 4), (1, 1), CEN, 0)
sizer.Add(self.yarr[1], (ir, 5), (1, 1), CEN, 0)
sizer.Add(SimpleText(panel, ')'), (ir, 6), (1, 1), LCEN, 0)
ir += 1
sizer.Add(self.yops[2], (ir, 4), (1, 1), CEN, 0)
sizer.Add(self.yarr[2], (ir, 5), (1, 1), CEN, 0)
sizer.Add(SimpleText(panel, ']'), (ir, 6), (1, 1), LCEN, 0)
self.use_deriv = Check(panel, default=False, label='Use Derivative?',
action=self.onColumnChoices)
self.dtcorr = Check(panel, default=True, label='correct deadtime?',
action=self.onColumnChoices)
ir += 1
sizer.Add(self.use_deriv, (ir, 0), (1, 3), LCEN, 0)
sizer.Add(self.dtcorr, (ir, 3), (1, 3), LCEN, 0)
pack(panel, sizer)
self.nb = flat_nb.FlatNotebook(mainpanel, -1, agwStyle=FNB_STYLE)
self.nb.SetTabAreaColour(wx.Colour(248,248,240))
self.nb.SetActiveTabColour(wx.Colour(254,254,195))
self.nb.SetNonActiveTabTextColour(wx.Colour(40,40,180))
self.nb.SetActiveTabTextColour(wx.Colour(80,0,0))
self.xas_panel = self.CreateXASPanel(self.nb) # mainpanel)
self.fit_panel = self.CreateFitPanel(self.nb) # mainpanel)
self.nb.AddPage(self.fit_panel, ' General Analysis ', True)
self.nb.AddPage(self.xas_panel, ' XAS Processing ', True)
mainsizer.Add(panel, 0, LCEN|wx.EXPAND, 2)
btnbox = wx.Panel(mainpanel)
btnsizer = wx.BoxSizer(wx.HORIZONTAL)
for ttl, opt in (('New Plot', 'new'),
('Over Plot (left)', 'left'),
('Over Plot (right)', 'right')):
btnsizer.Add(Button(btnbox, ttl, size=(135, -1),
action=partial(self.onPlot, opt=opt)),
LCEN, 1)
pack(btnbox, btnsizer)
mainsizer.Add(btnbox, 0, LCEN, 2)
mainsizer.Add(self.nb, 1, LCEN|wx.EXPAND, 2)
pack(mainpanel, mainsizer)
return mainpanel
def build_display(self):
self.SetFont(Font(10))
titleopts = dict(font=Font(11), colour='#AA0000')
gopts = dict(ncols=4, nrows=4, pad=2, itemstyle=LCEN)
xas = self.xaspanel = GridPanel(self, **gopts)
gen = self.genpanel = GridPanel(self, **gopts)
self.btns = {}
#gen
opts = dict(action=self.UpdatePlot, size=(65, -1), gformat=True)
self.xshift = FloatCtrl(gen, value=0.0, **opts)
self.xscale = FloatCtrl(gen, value=1.0, **opts)
self.yshift = FloatCtrl(gen, value=0.0, **opts)
self.yscale = FloatCtrl(gen, value=1.0, **opts)
self.btns['xshift'] = BitmapButton(gen, get_icon('plus'),
action=partial(self.on_selpoint, opt='xshift'),
tooltip='use last point selected from plot')
self.btns['yshift'] = BitmapButton(gen, get_icon('plus'),
action=partial(self.on_selpoint, opt='yshift'),
tooltip='use last point selected from plot')
opts = dict(action=self.onSmoothChoice, size=(30, -1))
sm_row1 = wx.Panel(gen)
sm_row2 = wx.Panel(gen)
sm_siz1= wx.BoxSizer(wx.HORIZONTAL)
sm_siz2= wx.BoxSizer(wx.HORIZONTAL)
self.smooth_c0 = FloatCtrl(sm_row1, value=2, precision=0, minval=1, **opts)
self.smooth_c1 = FloatCtrl(sm_row1, value=1, precision=0, minval=1, **opts)
self.smooth_msg = SimpleText(sm_row1, label=' ', size=(205, -1))
opts['size'] = (65, -1)
self.smooth_sig = FloatCtrl(sm_row2, value=1, gformat=True, **opts)
opts['size'] = (120, -1)
self.smooth_op = Choice(sm_row1, choices=SMOOTH_OPS, **opts)
self.smooth_op.SetSelection(0)
self.smooth_conv = Choice(sm_row2, choices=CONV_OPS, **opts)
self.smooth_c0.Disable()
self.smooth_c1.Disable()
self.smooth_sig.Disable()
self.smooth_conv.SetSelection(0)
self.smooth_conv.Disable()
sm_siz1.Add(self.smooth_op, 0, LCEN, 1)
sm_siz1.Add(SimpleText(sm_row1, ' n= '), 0, LCEN, 1)
sm_siz1.Add(self.smooth_c0, 0, LCEN, 1)
sm_siz1.Add(SimpleText(sm_row1, ' order= '), 0, LCEN, 1)
sm_siz1.Add(self.smooth_c1, 0, LCEN, 1)
sm_siz1.Add(self.smooth_msg, 0, LCEN, 1)
sm_siz2.Add(SimpleText(sm_row2, ' form= '), 0, LCEN, 1)
sm_siz2.Add(self.smooth_conv, 0, LCEN, 1)
sm_siz2.Add(SimpleText(sm_row2, ' sigma= '), 0, LCEN, 1)
sm_siz2.Add(self.smooth_sig, 0, LCEN, 1)
pack(sm_row1, sm_siz1)
pack(sm_row2, sm_siz2)
gen.Add(SimpleText(gen, ' General Data Processing', **titleopts), dcol=8)
gen.Add(SimpleText(gen, ' X shift:'), newrow=True)
gen.Add(self.btns['xshift'])
gen.Add(self.xshift, dcol=2)
gen.Add(SimpleText(gen, ' X scale:'))
gen.Add(self.xscale, dcol=2)
gen.Add(SimpleText(gen, ' Y shift:'), newrow=True)
gen.Add(self.btns['yshift'])
gen.Add(self.yshift, dcol=2)
gen.Add(SimpleText(gen, ' Y scale:'))
gen.Add(self.yscale, dcol=2)
gen.Add(SimpleText(gen, ' Smoothing:'), newrow=True)
gen.Add(sm_row1, dcol=8)
gen.Add(sm_row2, icol=1, dcol=7, newrow=True)
gen.pack()
#xas
opts = {'action': self.UpdatePlot}
e0opts_panel = wx.Panel(xas)
self.xas_autoe0 = Check(e0opts_panel, default=True, label='auto?', **opts)
self.xas_showe0 = Check(e0opts_panel, default=True, label='show?', **opts)
sx = wx.BoxSizer(wx.HORIZONTAL)
sx.Add(self.xas_autoe0, 0, LCEN, 4)
sx.Add(self.xas_showe0, 0, LCEN, 4)
pack(e0opts_panel, sx)
self.xas_autostep = Check(xas, default=True, label='auto?', **opts)
opts['size'] = (250, -1)
self.xas_op = Choice(xas, choices=XASOPChoices, **opts)
self.xas_op.SetStringSelection('Normalized')
for name in ('e0', 'pre1', 'pre2', 'nor1', 'nor2'):
bb = BitmapButton(xas, get_icon('plus'),
action=partial(self.on_selpoint, opt=name),
tooltip='use last point selected from plot')
self.btns[name] = bb
opts = {'size': (65, -1), 'gformat': True}
self.xas_e0 = FloatCtrl(xas, value=0, action=self.onSet_XASE0, **opts)
self.xas_step = FloatCtrl(xas, value=0, action=self.onSet_XASStep, **opts)
opts['precision'] = 1
opts['action'] = self.UpdatePlot
self.xas_pre1 = FloatCtrl(xas, value=-200, **opts)
self.xas_pre2 = FloatCtrl(xas, value= -30, **opts)
self.xas_nor1 = FloatCtrl(xas, value= 50, **opts)
self.xas_nor2 = FloatCtrl(xas, value= -50, **opts)
opts = {'size': (50, -1),
'choices': ('0', '1', '2', '3'),
'action': self.UpdatePlot}
self.xas_vict = Choice(xas, **opts)
self.xas_nnor = Choice(xas, **opts)
self.xas_vict.SetSelection(1)
self.xas_nnor.SetSelection(1)
def CopyBtn(name):
return Button(xas, 'Copy', size=(50, 30),
action=partial(self.onCopyParam, name))
xas.Add(SimpleText(xas, ' XAS Data Processing', **titleopts), dcol=6)
xas.Add(SimpleText(xas, ' Copy to Selected Groups?'), style=RCEN, dcol=3)
xas.Add(SimpleText(xas, 'Arrays to Plot: '), newrow=True)
xas.Add(self.xas_op, dcol=6)
xas.Add((10, 10))
xas.Add(CopyBtn('xas_op'), style=RCEN)
xas.Add(SimpleText(xas, 'E0 : '), newrow=True)
xas.Add(self.btns['e0'])
xas.Add(self.xas_e0)
xas.Add(e0opts_panel, dcol=4)
xas.Add((10, 1))
xas.Add(CopyBtn('xas_e0'), style=RCEN)
xas.Add(SimpleText(xas, 'Edge Step: '), newrow=True)
xas.Add((10, 1))
xas.Add(self.xas_step)
xas.Add(self.xas_autostep, dcol=3)
xas.Add((10, 1))
xas.Add((10, 1))
xas.Add(CopyBtn('xas_step'), style=RCEN)
xas.Add(SimpleText(xas, 'Pre-edge range: '), newrow=True)
xas.Add(self.btns['pre1'])
xas.Add(self.xas_pre1)
xas.Add(SimpleText(xas, ':'))
xas.Add(self.btns['pre2'])
xas.Add(self.xas_pre2)
xas.Add(SimpleText(xas, 'Victoreen:'))
xas.Add(self.xas_vict)
xas.Add(CopyBtn('xas_pre'), style=RCEN)
xas.Add(SimpleText(xas, 'Normalization range: '), newrow=True)
xas.Add(self.btns['nor1'])
xas.Add(self.xas_nor1)
xas.Add(SimpleText(xas, ':'))
xas.Add(self.btns['nor2'])
xas.Add(self.xas_nor2)
xas.Add(SimpleText(xas, 'PolyOrder:'))
xas.Add(self.xas_nnor)
xas.Add(CopyBtn('xas_norm'), style=RCEN)
xas.pack()
saveconf = Button(self, 'Save as Default Settings',
size=(175, 30),
action=self.onSaveConfigBtn)
hxline = HLine(self, size=(550, 2))
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.AddMany([((10, 10), 0, LCEN, 10), (gen, 0, LCEN, 10),
((10, 10), 0, LCEN, 10), (hxline, 0, LCEN, 10),
((10, 10), 0, LCEN, 10), (xas, 0, LCEN, 10),
((10, 10), 0, LCEN, 10), (saveconf, 0, LCEN, 10),
])
xas.Disable()
pack(self, sizer)
def __init__(self):
wx.Frame.__init__(self, None, -1, 'wxutil demo',
style=wx.DEFAULT_FRAME_STYLE|wx.RESIZE_BORDER|wx.TAB_TRAVERSAL)
self.SetTitle('wxutil demo')
self.SetFont(Font(11))
self.set_menu()
self.statusbar = self.CreateStatusBar(2, 1)
self.statusbar.SetStatusWidths([-2, -1])
statusbar_fields = ['Initializing....', ' ']
for i in range(len(statusbar_fields)):
self.statusbar.SetStatusText(statusbar_fields[i], i)
self.Bind(wx.EVT_CLOSE, self.onExit)
panel = GridPanel(self, nrows=8, ncols=4)
tctrl_name = TextCtrl(panel, value='', action=self.onName,
size=(250, -1))
lctrl_addr = LabeledTextCtrl(self, value='<>', action=self.onAddr,
labeltext=' Address: ', size=(250, -1))
lab3 = HyperText(panel,' FloatCtrl: ', size=(100, -1), action=self.onHyperText)
val3 = FloatCtrl(panel, '3', action=self.onFloat1, precision=2,
minval=0, maxval=1000, size=(250, -1))
lab4 = HyperText(panel,' FloatSpin: ', size=(100, -1), action=self.onHyperText)
val4 = FloatSpin(panel, '12.2', action=self.onFloatSpin, digits=2,
increment=0.1, size=(250, -1))
labx = HyperText(panel,' NumericCombo: ', size=(100, -1), action=self.onHyperText)
steps = make_steps(prec=1, tmin=0, tmax=100)
valx = NumericCombo(panel, steps, precision=1)
self.choice1 = Choice(panel, size=(200, -1),action=self.onChoice)
self.choice1.SetChoices(['Apple', 'Banana', 'Cherry'])
yesno = YesNo(panel)
check1 = Check(panel, label='enable? ', action=self.onCheck)
btn1 = Button(panel, label='Start', size=(100, -1), action=self.onStart)
pinbtn = BitmapButton(panel, get_icon('pin'), size=(50, -1),
action=partial(self.onBMButton, opt='pin1'),
tooltip='use last point selected from plot')
togbtn = ToggleButton(panel, 'Press Me',
action=self.onToggleButton, size=(100, -1),
tooltip='do it, do it now, you will like it')
browse_btn = Button(panel, 'Open File',
action=self.onFileOpen, size=(150, -1))
okcancel = OkCancel(panel, onOK=self.onOK, onCancel=self.onCancel)
ptable_btn = Button(panel, 'Show Periodic Table',
action=self.onPTable, size=(175, -1))
edlist_btn = Button(panel, 'Show Editable Listbox',
action=self.onEdList, size=(175, -1))
filelist_btn = Button(panel, 'Show File CheckList',
action=self.onFileList, size=(175, -1))
panel.AddText(' Name: ', style=LEFT)
panel.Add(tctrl_name, dcol=2)
panel.Add(lctrl_addr.label, newrow=True)
panel.Add(lctrl_addr, dcol=2)
panel.Add(lab3, newrow=True)
panel.Add(val3, dcol=3)
panel.Add(lab4, newrow=True)
panel.Add(val4, dcol=3)
panel.Add(labx, newrow=True)
panel.Add(valx, dcol=3)
panel.AddText(' Choice : ', newrow=True)
panel.Add(check1)
panel.Add(self.choice1)
panel.AddText(' Yes or No: ', newrow=True)
panel.Add(yesno)
panel.Add(HLine(panel, size=(500, -1)), dcol=3, newrow=True)
panel.Add(btn1, newrow=True)
panel.Add(pinbtn)
panel.Add(togbtn)
panel.Add(browse_btn, newrow=True)
panel.Add(ptable_btn)
panel.Add(edlist_btn, newrow=True)
panel.Add(filelist_btn)
panel.Add(okcancel, newrow=True)
panel.pack()
self.timer = wx.Timer(self)
self.last_time = time.time()
self.Bind(wx.EVT_TIMER, self.onTimer, self.timer)
fsizer = wx.BoxSizer(wx.VERTICAL)
fsizer.Add(panel, 0, wx.ALIGN_LEFT|wx.ALIGN_CENTER|wx.EXPAND)
wx.CallAfter(self.init_timer)
psize = panel.GetBestSize()
self.SetSize((psize[0]+5, psize[1]+25))
pack(self, fsizer)
self.Refresh()
def createControlPanel(self):
ctrlpanel = wx.Panel(self, name='Ctrl Panel')
bkgpanel = self.createBkgdPanel()
searchpanel = self.createSearchPanel()
labstyle = wx.ALIGN_LEFT|wx.ALIGN_BOTTOM|wx.EXPAND
ctrlstyle = wx.ALIGN_LEFT|wx.ALIGN_BOTTOM
txtstyle=wx.ALIGN_LEFT|wx.ST_NO_AUTORESIZE|wx.TE_PROCESS_ENTER
Font9 = Font(9)
Font10 = Font(10)
Font11 = Font(11)
plttitle = txt(ctrlpanel, 'Plot Parameters', font=Font10, size=200)
# y scale
yscalepanel = wx.Panel(ctrlpanel, name='YScalePanel')
ysizer = wx.BoxSizer(wx.HORIZONTAL)
ytitle = txt(yscalepanel, ' Y Axis:', font=Font10, size=80)
yspace = txt(yscalepanel, ' ', font=Font10, size=20)
ylog = Choice(yscalepanel, size=(80, 30), choices=['linear', 'log'],
action=self.onLogLinear)
yaxis = Check(yscalepanel, ' Show Y Scale ', action=self.onYAxis,
default=True)
self.wids['show_yaxis'] = yaxis
ysizer.Add(ytitle, 0, wx.ALIGN_CENTER_VERTICAL|wx.ALL, 0)
ysizer.Add(ylog, 0, wx.EXPAND|wx.ALL, 0)
ysizer.Add(yspace, 0, wx.EXPAND|wx.ALL, 0)
ysizer.Add(yaxis, 0, wx.EXPAND|wx.ALL, 0)
pack(yscalepanel, ysizer)
# zoom buttons
zoompanel = wx.Panel(ctrlpanel, name='ZoomPanel')
zsizer = wx.BoxSizer(wx.HORIZONTAL)
z1 = Button(zoompanel, 'Zoom In', size=(80, 30), action=self.onZoomIn)
z2 = Button(zoompanel, 'Zoom Out', size=(80, 30), action=self.onZoomOut)
p1 = Button(zoompanel, 'Pan Lo', size=(75, 30), action=self.onPanLo)
p2 = Button(zoompanel, 'Pan Hi', size=(75, 30), action=self.onPanHi)
zsizer.Add(p1, 0, wx.EXPAND|wx.ALL, 0)
zsizer.Add(p2, 0, wx.EXPAND|wx.ALL, 0)
zsizer.Add(z1, 0, wx.EXPAND|wx.ALL, 0)
zsizer.Add(z2, 0, wx.EXPAND|wx.ALL, 0)
pack(zoompanel, zsizer)
# x scale
xscalepanel = wx.Panel(ctrlpanel, name='XScalePanel')
xsizer = wx.BoxSizer(wx.HORIZONTAL)
xtitle = txt(xscalepanel, ' X Axis:', font=Font10, size=80)
xspace = txt(xscalepanel, ' ', font=Font10, size=20)
self.xaxis = wx.RadioBox(xscalepanel, -1, '',wx.DefaultPosition, wx.DefaultSize,
('q','2th','d'),
1, wx.RA_SPECIFY_ROWS)
self.xaxis.Bind(wx.EVT_RADIOBOX, self.onXaxis)
xsizer.Add(xtitle, 0, wx.ALIGN_CENTER_VERTICAL|wx.ALL, 0)
xsizer.Add(xspace, 0, wx.EXPAND|wx.ALL, 0)
xsizer.Add(self.xaxis, 0, wx.EXPAND|wx.ALL, 0)
pack(xscalepanel, xsizer)
###########################
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(plttitle, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL)
sizer.Add(lin(ctrlpanel, 195), 0, labstyle)
sizer.Add(yscalepanel, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL)
sizer.Add(lin(ctrlpanel, 195), 0, labstyle)
sizer.Add(lin(ctrlpanel, 195), 0, labstyle)
sizer.Add(xscalepanel, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL)
sizer.Add(lin(ctrlpanel, 195), 0, labstyle)
sizer.Add(lin(ctrlpanel, 195), 0, labstyle)
sizer.Add(zoompanel, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL)
sizer.Add(lin(ctrlpanel, 195), 0, labstyle)
sizer.Add(lin(ctrlpanel, 195), 0, labstyle)
sizer.Add(bkgpanel, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL)
sizer.Add(searchpanel, 0, wx.ALIGN_RIGHT|wx.EXPAND|wx.ALL)
pack(ctrlpanel, sizer)
return ctrlpanel
def __init__(self, parent, param, precision=4, vary=None, **kws):
self.param = param
title = " Parameter: %s " % (param.name)
wx.Dialog.__init__(self, parent, wx.ID_ANY, title=title)
panel = GridPanel(self)
self.SetFont(parent.GetFont())
if vary is None:
vary = 0
if param.vary:
vary = 1
elif param.expr is not None:
vary = 2
minval, maxval = param.min, param.max
stderr, expr = param.stderr, param.expr
sminval = "%s" % minval
smaxval = "%s" % maxval
if minval in (None, 'None', -np.inf): minval = -np.inf
if maxval in (None, 'None', np.inf): maxval = np.inf
if stderr is None: stderr = ''
if expr is None: expr = ''
self.wids = Empty()
self.wids.vary = Choice(panel,
choices=VARY_CHOICES,
action=self.onVaryChoice,
size=(110, -1))
self.wids.vary.SetSelection(vary)
self.wids.val = FloatCtrl(panel,
value=param.value,
size=(100, -1),
precision=precision,
minval=minval,
maxval=maxval)
self.wids.min = FloatCtrl(panel, value=minval, size=(100, -1))
self.wids.max = FloatCtrl(panel, value=maxval, size=(100, -1))
self.wids.expr = wx.TextCtrl(panel, value=expr, size=(300, -1))
self.wids.err = wx.StaticText(panel, label="%s" % stderr)
SetTip(self.wids.expr, "Mathematical expression to calcutate value")
btnsizer = wx.StdDialogButtonSizer()
ok_btn = wx.Button(panel, wx.ID_OK)
ok_btn.SetDefault()
btnsizer.AddButton(ok_btn)
btnsizer.AddButton(wx.Button(panel, wx.ID_CANCEL))
btnsizer.Realize()
panel.AddText(' Name:', style=LEFT)
panel.AddText(param.name, style=LEFT)
panel.AddText(' Type:', style=LEFT)
panel.Add(self.wids.vary, style=LEFT)
panel.AddText(' Value:', style=LEFT, newrow=True)
panel.Add(self.wids.val, style=LEFT)
panel.AddText(' Std Error:', style=LEFT)
panel.Add(self.wids.err, style=LEFT)
panel.AddText(' Min Value:', style=LEFT, newrow=True)
panel.Add(self.wids.min, style=LEFT)
panel.AddText(' Max Value:', style=LEFT)
panel.Add(self.wids.max, style=LEFT)
panel.AddText(' Constraint:', style=LEFT, newrow=True)
panel.Add(self.wids.expr, style=LEFT, dcol=3)
panel.Add(HLine(panel, size=(375, 2)), dcol=4, newrow=True)
panel.Add(btnsizer, dcol=4, newrow=True, style=LEFT)
panel.pack()
sizer = wx.BoxSizer(wx.VERTICAL)
sizer.Add(panel, 0, 0, 25)
self.onVaryChoice()
pack(self, sizer)
bsize = self.GetBestSize()
self.SetSize((bsize[0] + 10, bsize[1] + 10))
def __init__(self, parent, mca, size=(-1, -1), callback=None):
self.mca = mca
self.callback = callback
wx.Frame.__init__(self,
parent,
-1,
'Calibrate MCA',
size=size,
style=wx.DEFAULT_FRAME_STYLE)
opanel = scrolled.ScrolledPanel(self)
osizer = wx.BoxSizer(wx.VERTICAL)
panel = GridPanel(opanel)
self.calib_updated = False
panel.AddText("Calibrate MCA Energy (Energies in eV)",
colour='#880000',
dcol=7)
panel.AddText("ROI", newrow=True, style=CEN)
panel.AddText("Predicted", style=CEN)
panel.AddText("Peaks with Current Calibration", dcol=3, style=CEN)
panel.AddText("Peaks with Refined Calibration", dcol=3, style=CEN)
panel.AddText("Name", newrow=True, style=CEN)
panel.AddText("Energy", style=CEN)
panel.AddText("Center", style=CEN)
panel.AddText("Difference", style=CEN)
panel.AddText("FWHM", style=CEN)
panel.AddText("Center", style=CEN)
panel.AddText("Difference", style=CEN)
panel.AddText("FWHM", style=CEN)
panel.AddText("Use? ", style=CEN)
panel.Add(HLine(panel, size=(700, 3)), dcol=9, newrow=True)
self.wids = []
# find ROI peak positions
self.init_wids = {}
for roi in self.mca.rois:
eknown, ecen, fwhm = 1, 1, 1
words = roi.name.split()
elem = words[0].title()
family = 'ka'
if len(words) > 1:
family = words[1]
try:
eknown = xray_line(elem, family).energy / 1000.0
except (AttributeError, ValueError):
eknown = 0.0001
mid = (roi.right + roi.left) / 2
wid = (roi.right - roi.left) / 2
ecen = mid * mca.slope + mca.offset
fwhm = 2.354820 * wid * mca.slope
diff = ecen - eknown
name = (' ' + roi.name + ' ' * 10)[:10]
opts = {'style': CEN, 'size': (75, -1)}
w_name = SimpleText(panel, name, **opts)
w_pred = SimpleText(panel, "% .1f" % (1000 * eknown), **opts)
w_ccen = SimpleText(panel, "% .1f" % (1000 * ecen), **opts)
w_cdif = SimpleText(panel, "% .1f" % (1000 * diff), **opts)
w_cwid = SimpleText(panel, "% .1f" % (1000 * fwhm), **opts)
w_ncen = SimpleText(panel, "-----", **opts)
w_ndif = SimpleText(panel, "-----", **opts)
w_nwid = SimpleText(panel, "-----", **opts)
w_use = Check(panel, label='', size=(40, -1), default=0)
panel.Add(w_name, style=LEFT, newrow=True)
panel.AddMany((w_pred, w_ccen, w_cdif, w_cwid, w_ncen, w_ndif,
w_nwid, w_use))
self.init_wids[roi.name] = [
False, w_pred, w_ccen, w_cdif, w_cwid, w_use
]
self.wids.append(
(roi.name, eknown, ecen, w_ncen, w_ndif, w_nwid, w_use))
panel.Add(HLine(panel, size=(700, 3)), dcol=9, newrow=True)
offset = 1000.0 * self.mca.offset
slope = 1000.0 * self.mca.slope
panel.AddText("Current Calibration:", dcol=2, newrow=True)
panel.AddText("offset(eV):")
panel.AddText("%.3f" % (offset), dcol=1, style=RIGHT)
panel.AddText("slope(eV/chan):")
panel.AddText("%.3f" % (slope), dcol=1, style=RIGHT)
panel.AddText("Refined Calibration:", dcol=2, newrow=True)
self.new_offset = FloatCtrl(panel,
value=offset,
precision=3,
size=(80, -1))
self.new_slope = FloatCtrl(panel,
value=slope,
precision=3,
size=(80, -1))
panel.AddText("offset(eV):")
panel.Add(self.new_offset, dcol=1, style=RIGHT)
panel.AddText("slope(eV/chan):")
panel.Add(self.new_slope, dcol=1, style=RIGHT)
self.calib_btn = Button(panel,
'Compute Calibration',
size=(175, -1),
action=self.onCalibrate)
self.calib_btn.Disable()
panel.Add(self.calib_btn, dcol=3, newrow=True)
panel.Add(Button(panel,
'Use New Calibration',
size=(175, -1),
action=self.onUseCalib),
dcol=3,
style=RIGHT)
panel.Add(Button(panel, 'Done', size=(125, -1), action=self.onClose),
dcol=2,
style=RIGHT)
panel.pack()
a = panel.GetBestSize()
self.SetSize((a[0] + 25, a[1] + 50))
osizer.Add(panel)
pack(opanel, osizer)
opanel.SetupScrolling()
self.Show()
self.Raise()
self.init_proc = False
self.init_t0 = time.time()
self.init_timer = wx.Timer(self)
self.Bind(wx.EVT_TIMER, self.onInitTimer, self.init_timer)
self.init_timer.Start(2)
