def processServer(self, cmdDict=None, action=None):
'''processServer: This method processes a server configuration object. It takes two parameters, a dictionary containing the command and the action (RW)'''
self.logger.trace("processServer: cmdDict=%s" % cmdDict)
if cmdDict == None:
self.logger.error("processServer: No dictionary was passed to the generateCommands method")
raise ProcessCommandException("No dictionary was passed to the generateCommands method")
#end-if
k = cmdDict.keys()[0]
v = cmdDict.values()[0]
self.logger.trace("processServer: key=%s, value=%s" % (k, v))
if k and v != None:
self.validateScope(v, 'processServer')
srv = AdminConfig.getid(v['scope']+"%s:%s/" % (k, v['name']))
self.logger.trace("processServer: srv=%s " % srv)
if srv == "":
self.logger.info("processServer: creating server %s" % v['name'])
else:
srvObj = AdminConfig.getObjectName(srv)
self.logger.trace("processServer: srvObj %s" % srvObj)
ptype = AdminControl.getAttribute(srvObj, 'processType')
self.logger.trace("processServer: ptype %s" % ptype)
if ptype != 'UnManagedProcess':
self.logger.info("processServer: This is a Network Deployment Profile so this command will run.")
else:
self.logger.warn("processServer: This is not a Network Deployment Profile so this command won't be run. Use the manageprofiles too to create servers." )
#raise ProcessCommandException("This is not a Network Deployment Profile so this command won't be run. Use the manageprofiles too to create servers.")
#end-if
#end-if
else:
self.logger.error("processServer: key and value parameters were not suppled to the method.")
raise ProcessCommandException("key and value parameters were not suppled to the method.")
def processServer(self, cmdDict=None, action=None):
'''processServer: This method processes a server configuration object. It takes two parameters, a dictionary containing the command and the action (RW)'''
self.logger.trace("processServer: cmdDict=%s" % cmdDict)
if cmdDict == None:
self.logger.error("processServer: No dictionary was passed to the generateCommands method")
raise ProcessCommandException("No dictionary was passed to the generateCommands method")
#end-if
k = cmdDict.keys()[0]
v = cmdDict.values()[0]
self.logger.trace("processServer: key=%s, value=%s" % (k, v))
if k and v != None:
self.validateScope(v, 'processServer')
srv = AdminConfig.getid(v['scope']+"%s:%s/" % (k, v['name']))
self.logger.trace("processServer: srv=%s " % srv)
if srv == "":
self.logger.info("processServer: creating server %s" % v['name'])
else:
srvObj = AdminConfig.getObjectName(srv)
self.logger.trace("processServer: srvObj %s" % srvObj)
ptype = AdminControl.getAttribute(srvObj, 'processType')
self.logger.trace("processServer: ptype %s" % ptype)
if ptype != 'UnManagedProcess':
self.logger.info("processServer: This is a Network Deployment Profile so this command will run.")
else:
self.logger.warn("processServer: This is not a Network Deployment Profile so this command won't be run. Use the manageprofiles too to create servers." )
#raise ProcessCommandException("This is not a Network Deployment Profile so this command won't be run. Use the manageprofiles too to create servers.")
#end-if
#end-if
else:
self.logger.error("processServer: key and value parameters were not suppled to the method.")
raise ProcessCommandException("key and value parameters were not suppled to the method.")
def processSIBQueue(self, k=None, a=None, c=None, action=None):
attrDict=a
attrDict['type'] = 'Queue'
self.logger.trace("processSIBQueue: attrDict=%s" % attrDict)
cmdDict=c['SIBQueue']
self.logger.trace("processSIBQueue: cmdDict=%s" % cmdDict)
self.sib = None
queueList = AdminTask.listSIBDestinations(['-bus %s' % attrDict['bus']]).split('\r\n')
self.logger.trace("processSIBQueue: queueList=%s" % queueList)
for queue in queueList:
self.logger.trace("processSIBQueue: queue=%s" % queue)
identifier = AdminConfig.showAttribute(queue, "identifier")
self.logger.trace("processSIBQueue: identifier=%s" % identifier)
if (identifier == attrDict['name']):
self.sib = queue
self.logger.trace("processSIBQueue: queue %s already exists" % attrDict['name'])
self.logger.trace("processSIBQueue: self.sib=%s" % self.sib)
if self.sib != None:
self.logger.warn("processSIBQueue: queue %s already exists on bus %s" % (attrDict['name'], attrDict['bus']))
self.logger.trace("processSIBQueue: queue attributes:%s" % AdminConfig.show(self.sib).split('\r\n'))
for key, value in cmdDict.items():
self.logger.trace("processSIBQueue: key=%s, value=%s" % (key, value))
if key != 'scope' and key != 'node' and key != 'server' and key != 'identifier':
actualValue = AdminConfig.showAttribute(self.sib, key)
self.logger.trace("processSIBQueue: actualValue=%s" % actualValue)
if actualValue != value:
if action == 'W':
self.logger.info("processSIBQueue: modifying attr %s: actualValue=%s, config=%s" % (key, actualValue, value))
self.logger.debug("processSIBQueue: command=AdminTask.modifySIBDestination(['-bus %s','-name %s','-%s %s'])" % (attrDict['bus'], attrDict['name'], key, value))
AdminTask.modifySIBDestination(['-bus', '%s' % attrDict['bus'], '-name', '%s' % attrDict['name'],'-%s' % key, '%s' % value])
else:
self.logger.warn("processSIBQueue: audit failure %s:%s: actualValue=%s, config=%s" % (AdminConfig.showAttribute(self.sib,'identifier'), key, actualValue, value))
else:
if action == 'W':
self.logger.info("processSIBQueue: creating %s:%s" % (k, attrDict['name']))
self.logger.debug("processSIBQueue: command=AdminTask.createSIBDestination(%s)" % (["-%s %s" % (key, value) for key, value in attrDict.items()]))
AdminTask.createSIBDestination(["-%s %s" % (key, value) for key, value in attrDict.items()])
else:
self.logger.info("processSIBQueue: action is %s, will not be creating %s:%s" % (action, k, attrDict['name']))
def processSIBusMember(self, k=None, a=None, c=None, action=None):
attrDict=a
self.logger.warn("processSIBusMember: attrDict %s" % attrDict)
cmdDict=c
self.logger.warn("processSIBusMember: cmdDict %s" % cmdDict)
self.sib = AdminConfig.getid('/SIBusMember:%s/' % cmdDict['server'])
self.logger.trace("processSIBusMember: self.sib=%s" % self.sib)
if self.sib != '':
self.logger.warn("processSIBusMember: server %s already member of the bus %s" % (attrDict['server'], attrDict['bus']))
else:
self.logger.info("processSIBusMember: creating %s:%s" % (k, attrDict['bus']))
self.logger.debug("processSIBusMember: command=AdminTask.addSIBusMember(%s)" % (["-%s %s" % (key, value) for key, value in attrDict.items()]))
AdminTask.addSIBusMember(["-%s %s" % (key, value) for key, value in attrDict.items()])
def setTemplate(self, key=None, valueDict=None):
template = None
if key == 'DataSource':
if valueDict['providerType'] == 'Oracle JDBC Driver (XA)':
self.logger.trace("setTemplate: Oracle JDBC Driver DataSource")
template = AdminConfig.listTemplates('DataSource', "Oracle JDBC Driver XA DataSource")
else:
self.logger.trace("setTemplate: Oracle JDBC Driver DataSource")
template = AdminConfig.listTemplates('DataSource', "Oracle JDBC Driver DataSource")
elif key == 'JDBCProvider':
if valueDict['providerType'] == 'Oracle JDBC Driver (XA)':
self.logger.trace("setTemplate: Oracle JDBC Driver Provider Only (XA)")
template = AdminConfig.listTemplates('JDBCProvider', 'Oracle JDBC Driver Provider Only (XA)')
else:
self.logger.trace("setTemplate: Oracle JDBC Driver Provider Only")
template = 'Oracle JDBC Driver Provider Only(templates/system|jdbc-resource-provider-only-templates.xml#JDBCProvider_Oracle_5)'
elif key == 'MQQueueConnectionFactory':
template = AdminConfig.listTemplates('MQQueueConnectionFactory', 'First Example WMQ QueueConnectionFactory')
elif key == 'MQQueue':
template = AdminConfig.listTemplates('MQQueue', 'Example.JMS.WMQ.Q1')
self.logger.trace("setTemplate: template=%s" % template)
return template
def processSIBQueue(self, k=None, a=None, c=None, action=None):
attrDict=a
attrDict['type'] = 'Queue'
self.logger.trace("processSIBQueue: attrDict=%s" % attrDict)
cmdDict=c['SIBQueue']
self.logger.trace("processSIBQueue: cmdDict=%s" % cmdDict)
self.sib = None
queueList = AdminTask.listSIBDestinations(['-bus %s' % attrDict['bus']]).splitlines()
self.logger.trace("processSIBQueue: queueList=%s" % queueList)
for queue in queueList:
self.logger.trace("processSIBQueue: queue=%s" % queue)
identifier = AdminConfig.showAttribute(queue, "identifier")
self.logger.trace("processSIBQueue: identifier=%s" % identifier)
if (identifier == attrDict['name']):
self.sib = queue
self.logger.trace("processSIBQueue: queue %s already exists" % attrDict['name'])
self.logger.trace("processSIBQueue: self.sib=%s" % self.sib)
if self.sib != None:
self.logger.warn("processSIBQueue: queue %s already exists on bus %s" % (attrDict['name'], attrDict['bus']))
self.logger.trace("processSIBQueue: queue attributes:%s" % AdminConfig.show(self.sib).splitlines())
for key, value in cmdDict.items():
self.logger.trace("processSIBQueue: key=%s, value=%s" % (key, value))
if key != 'scope' and key != 'node' and key != 'server' and key != 'identifier':
actualValue = AdminConfig.showAttribute(self.sib, key)
self.logger.trace("processSIBQueue: actualValue=%s" % actualValue)
if actualValue != value:
if action == 'W':
self.logger.info("processSIBQueue: modifying attr %s: actualValue=%s, config=%s" % (key, actualValue, value))
self.logger.debug("processSIBQueue: command=AdminTask.modifySIBDestination(['-bus %s','-name %s','-%s %s'])" % (attrDict['bus'], attrDict['name'], key, value))
AdminTask.modifySIBDestination(['-bus', '%s' % attrDict['bus'], '-name', '%s' % attrDict['name'],'-%s' % key, '%s' % value])
else:
self.logger.warn("processSIBQueue: audit failure %s:%s: actualValue=%s, config=%s" % (AdminConfig.showAttribute(self.sib,'identifier'), key, actualValue, value))
else:
if action == 'W':
self.logger.info("processSIBQueue: creating %s:%s" % (k, attrDict['name']))
self.logger.debug("processSIBQueue: command=AdminTask.createSIBDestination(%s)" % (["-%s %s" % (key, value) for key, value in attrDict.items()]))
AdminTask.createSIBDestination(["-%s %s" % (key, value) for key, value in attrDict.items()])
else:
self.logger.info("processSIBQueue: action is %s, will not be creating %s:%s" % (action, k, attrDict['name']))
def setTemplate(self, key=None, valueDict=None):
template = None
if key == 'DataSource':
if valueDict['providerType'] == 'Oracle JDBC Driver (XA)':
self.logger.trace("setTemplate: Oracle JDBC Driver DataSource")
template = AdminConfig.listTemplates('DataSource', "Oracle JDBC Driver XA DataSource")
else:
self.logger.trace("setTemplate: Oracle JDBC Driver DataSource")
template = AdminConfig.listTemplates('DataSource', "Oracle JDBC Driver DataSource")
elif key == 'JDBCProvider':
if valueDict['providerType'] == 'Oracle JDBC Driver (XA)':
self.logger.trace("setTemplate: Oracle JDBC Driver Provider Only (XA)")
template = AdminConfig.listTemplates('JDBCProvider', 'Oracle JDBC Driver Provider Only (XA)')
else:
self.logger.trace("setTemplate: Oracle JDBC Driver Provider Only")
template = 'Oracle JDBC Driver Provider Only(templates/system|jdbc-resource-provider-only-templates.xml#JDBCProvider_Oracle_5)'
elif key == 'MQQueueConnectionFactory':
template = AdminConfig.listTemplates('MQQueueConnectionFactory', 'First Example WMQ QueueConnectionFactory')
elif key == 'MQQueue':
template = AdminConfig.listTemplates('MQQueue', 'Example.JMS.WMQ.Q1')
self.logger.trace("setTemplate: template=%s" % template)
return template
def processSIB(self, k=None, a=None, action=None):
attrDict=a
self.sib = AdminConfig.getid('/SIBus:%s/' % attrDict['bus'])
if self.sib != '':
for key in attrDict.keys():
self.logger.trace("processSIB: key=%s" % key)
if key != 'scope' and key != 'bus':
self.value=AdminConfig.showAttribute(self.sib, key)
self.logger.trace("processSIB: self.value=%s" % self.value)
if self.value != attrDict[key]:
if action == 'W':
self.logger.info("processSIB: modifying %s:%s:%s=%s" % (k, AdminConfig.showAttribute(self.sib,'name'), key, attrDict[key]))
self.logger.debug("processSIB: command=AdminTask.modifySIBus(%s)" % (["-%s %s -%s %s" % ('bus', attrDict['bus'], key, attrDict[key])]))
AdminTask.modifySIBus(["-%s %s -%s %s" % ('bus', attrDict['bus'], key, attrDict[key])])
else:
self.logger.warn("processSIB: audit failure %s:%s, actual=%s config=%s" % (k, AdminConfig.showAttribute(self.sib,'name'), AdminConfig.showAttribute(self.sib, key), attrDict[key]))
else:
if action == 'W':
self.logger.info("processSIB: creating %s:%s" % (k, attrDict['bus']))
self.logger.debug("processSIB: command=AdminTask.createSIBus(%s)" % (["-%s %s" % (key, value) for key, value in attrDict.items()]))
AdminTask.createSIBus(["-%s %s" % (key, value) for key, value in attrDict.items()])
else:
self.logger.info("processSIB: action is %s, will not be creating %s:%s" % (action, k, attrDict['bus']))
def processSIB(self, k=None, a=None, action=None):
attrDict=a
self.sib = AdminConfig.getid('/SIBus:%s/' % attrDict['bus'])
if self.sib != '':
for key in attrDict.keys():
self.logger.trace("processSIB: key=%s" % key)
if key != 'scope' and key != 'bus':
self.value=AdminConfig.showAttribute(self.sib, key)
self.logger.trace("processSIB: self.value=%s" % self.value)
if self.value != attrDict[key]:
if action == 'W':
self.logger.info("processSIB: modifying %s:%s:%s=%s" % (k, AdminConfig.showAttribute(self.sib,'name'), key, attrDict[key]))
self.logger.debug("processSIB: command=AdminTask.modifySIBus(%s)" % (["-%s %s -%s %s" % ('bus', attrDict['bus'], key, attrDict[key])]))
AdminTask.modifySIBus(["-%s %s -%s %s" % ('bus', attrDict['bus'], key, attrDict[key])])
else:
self.logger.warn("processSIB: audit failure %s:%s, actual=%s config=%s" % (k, AdminConfig.showAttribute(self.sib,'name'), AdminConfig.showAttribute(self.sib, key), attrDict[key]))
else:
if action == 'W':
self.logger.info("processSIB: creating %s:%s" % (k, attrDict['bus']))
self.logger.debug("processSIB: command=AdminTask.createSIBus(%s)" % (["-%s %s" % (key, value) for key, value in attrDict.items()]))
AdminTask.createSIBus(["-%s %s" % (key, value) for key, value in attrDict.items()])
else:
self.logger.info("processSIB: action is %s, will not be creating %s:%s" % (action, k, attrDict['bus']))
def writeQueuesByScope(scopeIds, qParams, tableId):
for s in scopeIds :
try :
queues = AdminTask.listWMQQueues(s).splitlines()
scope = s.split('|')[0].split('(')[1]
for q in queues :
tArgs = []
for p in qParams :
paramValue = AdminConfig.showAttribute(q,p)
tArgs.append(paramValue)
tArgs.append(scope)
tableId.rows.append(tArgs)
except :
print sys.exc_info()
def processSIBusMember(self, k=None, a=None, c=None, action=None):
attrDict=a
self.logger.trace("processSIBusMember: attrDict %s" % attrDict)
cmdDict=c
self.logger.trace("processSIBusMember: cmdDict %s" % cmdDict)
sibmembers = AdminConfig.list(k, AdminConfig.getid(cmdDict['scope'])).splitlines()
self.logger.trace("processSIBusMember: sibmembers=%s" % sibmembers)
self.logger.trace("processSIBusMember: sibmembers[0]=%s" % sibmembers[0])
self.sib = None
if sibmembers[0] != '':
self.logger.trace("processSIBusMember: found members in the bus.")
for sibmember in sibmembers:
self.logger.trace("processSIBusMember: sibmember=%s" % sibmember)
membername = AdminConfig.showAttribute(sibmember, 'server')
self.logger.trace("processSIBusMember: membername=%s" % membername)
if membername == attrDict['server']:
self.sib = sibmember
self.logger.trace("processSIBusMember: self.sib=%s" % self.sib)
if self.sib != None:
self.logger.warn("processSIBusMember: server %s already member of the bus %s" % (attrDict['server'], attrDict['bus']))
else:
self.logger.info("processSIBusMember: creating %s:%s" % (k, attrDict['bus']))
self.logger.debug("processSIBusMember: command=AdminTask.addSIBusMember(%s)" % (["-%s %s" % (key, value) for key, value in attrDict.items()]))
AdminTask.addSIBusMember(["-%s %s" % (key, value) for key, value in attrDict.items()])
def validateScope(self, valueDict=None, method=None, key=None):
self.valueDict=valueDict
self.method=method
key=key
self.logger.trace("validateScope: key=%s" % key)
if key == 'J2CActivationSpec' or key == 'J2CAdminObject' or key == 'J2CConnectionFactory':
valueDict['scope'] = ('%sJ2CResourceAdapter:SIB JMS Resource Adapter/' % valueDict['scope'])
self.logger.trace("validateScope: Adjusting Scope for resource provider=%s" % valueDict['scope'])
elif key == 'MQQueueConnectionFactory':
valueDict['scope'] = ('%sJMSProvider:WebSphere MQ JMS Provider/' % valueDict['scope'])
self.logger.trace("validateScope: Adjusting Scope for messaging provider=%s" % valueDict['scope'])
elif key == 'MQQueue':
valueDict['scope'] = ('%sJMSProvider:WebSphere MQ JMS Provider/' % valueDict['scope'])
self.logger.trace("validateScope: Adjusting Scope for messaging provider=%s" % valueDict['scope'])
self.scope = AdminConfig.getid(valueDict['scope'])
self.logger.trace("validateScope:%s self.scope=%s" % (self.method, self.scope))
if self.scope == "":
self.logger.error("validateScope:%s Scope %s does not exist. The object may not have been created yet or the scope in the configuration file is incorrect." % (self.method, valueDict['scope']))
raise ProcessCommandException("Scope %s does not exist. The object may not have been created yet or the scope in the configuration file is incorrect." % valueDict['scope'])
def validateScope(self, valueDict=None, method=None, key=None):
self.valueDict=valueDict
self.method=method
key=key
self.logger.trace("validateScope: key=%s" % key)
if key == 'J2CActivationSpec' or key == 'J2CAdminObject' or key == 'J2CConnectionFactory':
valueDict['scope'] = ('%sJ2CResourceAdapter:SIB JMS Resource Adapter/' % valueDict['scope'])
self.logger.trace("validateScope: Adjusting Scope for resource provider=%s" % valueDict['scope'])
elif key == 'MQQueueConnectionFactory':
valueDict['scope'] = ('%sJMSProvider:WebSphere MQ JMS Provider/' % valueDict['scope'])
self.logger.trace("validateScope: Adjusting Scope for messaging provider=%s" % valueDict['scope'])
elif key == 'MQQueue':
valueDict['scope'] = ('%sJMSProvider:WebSphere MQ JMS Provider/' % valueDict['scope'])
self.logger.trace("validateScope: Adjusting Scope for messaging provider=%s" % valueDict['scope'])
self.scope = AdminConfig.getid(valueDict['scope'])
self.logger.trace("validateScope:%s self.scope=%s" % (self.method, self.scope))
if self.scope == "":
self.logger.error("validateScope:%s Scope %s does not exist. The object may not have been created yet or the scope in the configuration file is incorrect." % (self.method, valueDict['scope']))
raise ProcessCommandException("Scope %s does not exist. The object may not have been created yet or the scope in the configuration file is incorrect." % valueDict['scope'])
def processNestedAttribute(self, cmdDict=None, action=None):
'''processNestedAttribute: This method processes a single nested attribute. It takes two parameters, a dictionary containing the command and the action (RW)'''
self.logger.trace("processNestedAttribute: cmdDict=%s" % cmdDict)
if cmdDict == None:
self.logger.error("processNestedAttribute: No dictionary was passed to the generateCommands method")
raise ProcessCommandException("No dictionary was passed to the generateCommands method")
#end-if
k = cmdDict.keys()[0]
v = cmdDict.values()[0]
self.logger.trace("processNestedAttribute: key=%s, value=%s" % (k, v))
try:
self.validateScope(v, 'processNestedAttribute')
except ProcessCommandException:
self.logger.info("processNestedAttribute: Skipping NestedAttribute %s:%s" % (k, v))
else:
attribute = None
if re.match("[a-z]", k):
self.logger.trace("processNestedAttribute: %s is a nested property." % k)
attribute=AdminConfig.showAttribute(AdminConfig.getid(v['scope']), k)
else:
attribute = AdminConfig.list('%s' % k, AdminConfig.getid(v['scope']))
self.logger.trace("processNestedAttribute: %s is an object." % k)
#end-if
for (k2, v2) in v.items():
if k2 != "scope":
actualValue=AdminConfig.showAttribute(attribute, k2)
if actualValue != v2:
if action == 'W':
self.logger.info("processNestedAttribute: modifying %s%s:%s=%s" % (v['scope'], k, k2, v2))
self.logger.debug("processNestedAttribute: command=AdminConfig.modify(attribute, [[%s, %s]])" % (k2, v2))
AdminConfig.modify(attribute, [[k2, v2]])
else:
self.logger.warn("processNestedAttribute: audit failure %s%s:%s, actual=%s config=%s" % (v['scope'], k, k2, actualValue, v2))
#end-if
else:
self.logger.debug("processNestedAttribute: ignoring %s%s:%s=%s" % (v['scope'], k, k2, v2))
def processNestedAttribute(self, cmdDict=None, action=None):
'''processNestedAttribute: This method processes a single nested attribute. It takes two parameters, a dictionary containing the command and the action (RW)'''
self.logger.trace("processNestedAttribute: cmdDict=%s" % cmdDict)
if cmdDict == None:
self.logger.error("processNestedAttribute: No dictionary was passed to the generateCommands method")
raise ProcessCommandException("No dictionary was passed to the generateCommands method")
#end-if
k = cmdDict.keys()[0]
v = cmdDict.values()[0]
self.logger.trace("processNestedAttribute: key=%s, value=%s" % (k, v))
try:
self.validateScope(v, 'processNestedAttribute')
except ProcessCommandException:
self.logger.info("processNestedAttribute: Skipping NestedAttribute %s:%s" % (k, v))
else:
attribute = None
if re.match("[a-z]", k):
self.logger.trace("processNestedAttribute: %s is a nested property." % k)
attribute=AdminConfig.showAttribute(AdminConfig.getid(v['scope']), k)
else:
attribute = AdminConfig.list('%s' % k, AdminConfig.getid(v['scope']))
self.logger.trace("processNestedAttribute: %s is an object." % k)
#end-if
for (k2, v2) in v.items():
if k2 != "scope":
actualValue=AdminConfig.showAttribute(attribute, k2)
if actualValue != v2:
if action == 'W':
self.logger.info("processNestedAttribute: modifying %s%s:%s=%s" % (v['scope'], k, k2, v2))
self.logger.debug("processNestedAttribute: command=AdminConfig.modify(attribute, [[%s, %s]])" % (k2, v2))
AdminConfig.modify(attribute, [[k2, v2]])
else:
self.logger.warn("processNestedAttribute: audit failure %s%s:%s, actual=%s config=%s" % (v['scope'], k, k2, actualValue, v2))
#end-if
else:
self.logger.debug("processNestedAttribute: ignoring %s%s:%s=%s" % (v['scope'], k, k2, v2))
def set(self, name, value, desc, type):
for prop in self.obj.getChildren('resourceProperties'):
if prop.getAttribute('name') == name:
prop.setAttribute('value', value)
return
AdminConfig.create('J2EEResourceProperty', self.obj.id, [['name', name], ['value', value], ['description', desc], ['type', type]])
tArgs = []
for p in qParams :
paramValue = AdminConfig.showAttribute(q,p)
tArgs.append(paramValue)
tArgs.append(scope)
tableId.rows.append(tArgs)
except :
print sys.exc_info()
QUEUE_HTML_FILE = 'Queues.html'
queuesFile = open(QUEUE_HTML_FILE, 'w')
queueT = HTML.Table(header_row=['Name', 'JNDI name', 'MQ Queue manager', 'MQ Queue name', 'Scope'])
queueParams = ["name", "jndiName", "baseQueueManagerName", "baseQueueName"]
cell = AdminConfig.getid('/Cell:/').splitlines()
nodes = AdminConfig.getid('/Node:/').splitlines()
servers = AdminConfig.getid('/Server:/').splitlines()
writeQueuesByScope(servers, queueParams, queueT)
htmlcode = str(queueT)
queuesFile.write(htmlcode)
queuesFile.write('<p>')
dbT = HTML.Table(header_row=['Name', 'JNDI name', 'Provider', 'JAAS Alias', 'Scope'])
dbParams = ['name', 'jndiName', 'provider', 'authDataAlias']
'''
def getChild(self, attrName): childId = AdminConfig.showAttribute(self.id, attrName) if childId: return ConfigObject(childId)
def getChildren(self, attrName): children = [] for childId in wsadminToList(AdminConfig.showAttribute(self.id, attrName)): children.append(ConfigObject(childId)) return children
def getAttribute(self, attrName): return AdminConfig.showAttribute(self.id, attrName)
def setAttribute(self, attrName, attrValue): AdminConfig.modify(self.id, [[attrName, attrValue]])
def getConfigObjects(filter): objects = [] for id in wsadminToList(AdminConfig.getid(filter)): objects.append(ConfigObject(id)) return objects
def processConfigItem(self, cmdDict=None, action=None):
'''processConfigItem: This method processes a single configuration object. It takes two parameters, a dictionary containing the command and the action (RW)'''
self.logger.trace("processConfigItem: cmdDict=%s" % cmdDict)
if cmdDict == None:
self.logger.error("processConfigItem: No dictionary was passed to the generateCommands method")
raise ProcessCommandException("No dictionary was passed to the generateCommands method")
#end-if
k = cmdDict.keys()[0]
v = cmdDict.values()[0]
self.logger.trace("processConfigItem: key=%s, value=%s" % (k, v))
template = self.setTemplate(key=k, valueDict=v)
self.logger.trace("processConfigItem: template=%s" % template)
try:
self.validateScope(valueDict=v, method='processConfigItem', key=k)
except ProcessCommandException:
self.logger.info("processConfigItem: Skipping ConfigItem %s:%s." % (k, v))
else:
self.logger.trace("processConfigItem: scope=%s " % AdminConfig.getid(v['scope']))
self.logger.trace("processConfigItem: finding object command=AdminConfig.getid('/%s:%s/') " % (k, v['name']))
obj = AdminConfig.getid('/%s:%s/' % (k, v['name']))
self.logger.trace("processConfigItem: obj=%s " % obj)
if obj == "":
self.logger.trace("processConfigItem: obj not found, creating...")
attrList = []
for key in v.keys():
if key != 'scope':
attrList.append([key, v[key]])
#end-if
#end-for
self.logger.trace("processConfigItem: attrList=%s" % attrList)
self.logger.trace("processConfigItem: template=%s" % template)
if template == None:
self.logger.trace("processConfigItem: template was not found...")
if action == 'W':
if k == 'J2CActivationSpec':
self.logger.trace("processConfigItem: key is J2CActivationSpec so fixing attribute list")
attr = AdminConfig.list('ActivationSpec', AdminConfig.getid(v['scope']))
attrList.append(['activationSpec', attr])
elif k == 'J2CAdminObject':
self.logger.trace("processConfigItem: key is J2CAdminObject so fixing attribute list")
attr = AdminConfig.list('AdminObject', AdminConfig.getid(v['scope']))
attrList.append(['adminObject', attr])
elif k == 'J2CConnectionFactory':
self.logger.trace("processConfigItem: key is J2CConnectionFactory so fixing attribute list")
attr = AdminConfig.list('ConnectionDefinition', AdminConfig.getid(v['scope']))
attrList.append(['connectionDefinition', attr])
self.logger.info("processConfigItem: creating %s:%s:%s" % (AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'name'), k, v['name']))
self.logger.debug("processConfigItem: command=AdminConfig.create('%s', %s, %s)" % (k, AdminConfig.getid(v['scope']), attrList))
AdminConfig.create('%s' % k, AdminConfig.getid(v['scope']), attrList)
else:
self.logger.warn("processConfigItem: action is set to %s. Item %s:%s:%s will not be created. Attribute and properties for this object will not exist and may cause failures in this script." % (action, AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'name'), k, v['name']))
#end-if
else:
self.logger.trace("processConfigItem: template was found...")
if action == 'W':
self.logger.info("processConfigItem: creating %s:%s:%s" % (AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'name'), k, v['name']))
self.logger.trace("processConfigItem: template=%s" % template)
self.logger.debug("processConfigItem: command=AdminConfig.createUsingTemplate('%s', %s, %s, %s)" % (k, AdminConfig.getid(v['scope']), attrList, template))
AdminConfig.createUsingTemplate('%s' % k, AdminConfig.getid(v['scope']), attrList, template)
else:
self.logger.warn("processConfigItem: action is set to %s. Item %s:%s:%s will not be created. Attribute and properties for this object will not exist and may cause failures in this script." % (action, AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'name'), k, v['name']))
#end-if
#end-if
#end-if
else:
for key in v.keys():
if key != 'scope':
actual = AdminConfig.showAttribute(obj, key)
self.logger.trace("processConfigItem: attribute=%s, value=%s" % (key, actual))
if actual != v[key]:
if action == 'W':
self.logger.info("processConfigItem: modifying actual=%s to %s" % (actual,v[key]))
self.logger.debug("processConfigItem: command=AdminConfig.modify(%s, [['%s', '%s']])" % (obj, key, v[key]))
AdminConfig.modify(obj, [[key, v[key]]])
else:
self.logger.warn("processPropertySet: audit failure %s:%s, actual=%s config=%s" % (AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'name'), (AdminConfig.showAttribute(obj, 'name')), (AdminConfig.showAttribute(obj, key)), v[key]))
def processSecurity(self, cmdDict=None, action=None):
'''Used to process security properties'''
self.logger.trace("processPropertySet: cmdDict=%s" % cmdDict)
if cmdDict == None:
self.logger.error("processPropertySet: No dictionary was passed to the generateCommands method")
raise ProcessCommandException("No dictionary was passed to the generateCommands method")
#end-if
k = cmdDict.keys()[0]
v = cmdDict.values()[0]
self.logger.trace("processSecrurity: key=%s, value=%s" % (k, v))
if k and v != None:
self.validateScope(v, 'processSecurity')
self.jaasAuthDataList = AdminConfig.list(k, AdminConfig.getid('%sSecurity:/' % v['scope'])).split('\r\n')
self.logger.trace("processSecrurity: jaasAuthDataList=%s"% self.jaasAuthDataList)
for key in v.keys():
if key == 'alias':
self.logger.trace("processSecrurity: key=%s, value=%s" % (key, v[key]))
itemFound="1"
self.logger.trace("processSecrurity: items length is=%s" % len(self.jaasAuthDataList))
for item in self.jaasAuthDataList:
self.logger.trace("processSecrurity: item=%s" % item)
if item != "":
self.logger.trace("processSecrurity: name=%s" % AdminConfig.showAttribute(item, 'alias'))
if AdminConfig.showAttribute(item, 'alias') == v[key]:
self.logger.trace("processSecrurity: checking alias %s" % AdminConfig.showAttribute(item,'alias'))
for key in v.keys():
if key != 'scope':
self.logger.trace("processSecrurity: key=%s" % key)
if AdminConfig.showAttribute(item, key) != v[key]:
self.logger.trace("processSecrurity: alias:%s, key=%s, actual=%s, config=%s" % (AdminConfig.showAttribute(item,'alias'), key, AdminConfig.showAttribute(item, key), v[key]))
if action == 'W':
self.logger.info("processSecrurity: modifying %s:%s=%s" % (AdminConfig.showAttribute(item,'alias'), key, v[key]))
self.logger.debug("processSecrurity: command=AdminConfig.modify(%s, [[%s, %s]])" % (AdminConfig.showAttribute(item,'alias'), key, v[key]))
AdminConfig.modify(item, [[key, v[key]]])
else:
self.logger.warn("processSecrurity: audit failure %s:, actual=%s config=%s" % (AdminConfig.showAttribute(item,'alias'), AdminConfig.showAttribute(item, key), v[key]))
#end-if
#end-if
#end-if
#end-for
itemFound = "0"
break
#end-if
#end-if
#end-for
if itemFound == "1":
self.logger.info("processSecrurity: creating %s:%s" % (k, v['alias']))
attrList = []
for key in v.keys():
if key != 'scope':
attrList.append([key, v[key]])
if action == 'W':
self.logger.debug("processSecrurity: command=AdminConfig.create(%s, %s, %s)" % (k, AdminConfig.getid('%sSecurity:/' % v['scope']), attrList))
AdminConfig.create(k, AdminConfig.getid('%sSecurity:/' % v['scope']), attrList)
else:
self.logger.warn("processSecrurity: action is %s so this item will not be created %s:%s" % (action, k, v['alias']))
#end-if
#end-if
#end-for
else:
self.logger.error("processPropertySet: key and value parameters were not suppled to the method.")
raise ProcessCommandException("key and value parameters were not suppled to the method.")
def processPropertySet(self, cmdDict=None, action=None):
'''processPropertySet: This method processes a single configuration object. It takes two parameters, a dictionary containing the command and the action (RW)'''
self.logger.trace("processPropertySet: cmdDict=%s" % cmdDict)
if cmdDict == None:
self.logger.error("processPropertySet: No dictionary was passed to the generateCommands method")
raise ProcessCommandException("No dictionary was passed to the generateCommands method")
#end-if
k = cmdDict.keys()[0]
v = cmdDict.values()[0]
self.logger.trace("processPropertySet: key=%s, value=%s" % (k, v))
try:
self.validateScope(v, 'processPropertySet')
except ProcessCommandException:
self.logger.info("processPropertySet: Skipping propertyset %s:%s " % (k, v))
else:
self.propSet = None
try:
self.logger.trace("processPropertySet: locating property set...")
self.propSet=AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'propertySet')
self.logger.trace("processPropertySet: property set found.")
except ScriptingException, msg:
self.logger.trace("processPropertySet: msg=%s" % msg)
self.logger.trace("processPropertySet: property set not found.")
self.logger.trace("processPropertySet: propSet=%s " % self.propSet)
self.propList = AdminConfig.list(k, AdminConfig.getid(v['scope'])).split('\r\n')
for key in v.keys():
if key == 'name':
self.logger.trace("processPropertySet: key=%s, value=%s" % (key, v[key]))
itemFound="1"
for item in self.propList:
self.logger.trace("processPropertySet: name=%s" % AdminConfig.showAttribute(item, 'name'))
if AdminConfig.showAttribute(item, 'name') == v[key]:
self.logger.trace("processPropertySet: actual name=%s, value=%s" % (AdminConfig.showAttribute(item, 'name'), AdminConfig.showAttribute(item, 'value')))
self.logger.trace("processPropertySet: config name=%s, value=%s" % (v['name'], v['value']))
if AdminConfig.showAttribute(item, 'value') != v['value']:
if action == 'W':
self.logger.info("processPropertySet: modifying %s:%s:%s=%s" % (AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'name'), AdminConfig.showAttribute(item, 'name'), 'value', v['value']))
self.logger.debug("processPropertySet: command=AdminConfig.modify(%s, [[%s, %s]])" % (item, 'value', v['value']))
AdminConfig.modify(item, [['value', v['value']]])
else:
self.logger.warn("processPropertySet: audit failure %s:%s, actual=%s config=%s" % (AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'name'), (AdminConfig.showAttribute(item, 'name')), AdminConfig.showAttribute(item, 'value'), v['value']))
#end-if
else:
self.logger.debug("processPropertySet: ignoring %s %s" % (AdminConfig.showAttribute(item, 'name'), AdminConfig.showAttribute(item, 'value')))
#end-if
itemFound = "0"
break
#end-if
#end-for
if itemFound == "1":
if self.propSet != None:
self.logger.info("processPropertySet: creating %s:%s:%s=%s" % (AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'name'), v[key], 'value', v['value']))
self.logger.debug("processPropertySet: command=AdminConfig.create(%s, %s, [['name', '%s'],['type', '%s'],['value', '%s'],['required', '%s'])" % (k, self.propSet, v[key], v['type'], v['value'], v['required']))
AdminConfig.create(k, self.propSet, [['name', v[key]],['type', v['type']],['value', v['value']],['required', v['required']]])
else:
self.logger.ERROR("processPropertySet: You tried to create a new property but the configuration does not have a property set. You will need to to write some code to deal with this because I haven't done it yet :-)")
def processConfigItem(self, cmdDict=None, action=None):
'''processConfigItem: This method processes a single configuration object. It takes two parameters, a dictionary containing the command and the action (RW)'''
self.logger.trace("processConfigItem: cmdDict=%s" % cmdDict)
if cmdDict == None:
self.logger.error("processConfigItem: No dictionary was passed to the generateCommands method")
raise ProcessCommandException("No dictionary was passed to the generateCommands method")
#end-if
k = cmdDict.keys()[0]
v = cmdDict.values()[0]
self.logger.trace("processConfigItem: key=%s, value=%s" % (k, v))
template = self.setTemplate(key=k, valueDict=v)
self.logger.trace("processConfigItem: template=%s" % template)
try:
self.validateScope(valueDict=v, method='processConfigItem', key=k)
except ProcessCommandException:
self.logger.info("processConfigItem: Skipping ConfigItem %s:%s." % (k, v))
else:
self.logger.trace("processConfigItem: scope=%s " % AdminConfig.getid(v['scope']))
self.logger.trace("processConfigItem: finding object command=AdminConfig.getid('/%s:%s/') " % (k, v['name']))
obj = AdminConfig.getid('/%s:%s/' % (k, v['name']))
self.logger.trace("processConfigItem: obj=%s " % obj)
if obj == "":
self.logger.trace("processConfigItem: obj not found, creating...")
attrList = []
for key in v.keys():
if key != 'scope':
attrList.append([key, v[key]])
#end-if
#end-for
self.logger.trace("processConfigItem: attrList=%s" % attrList)
self.logger.trace("processConfigItem: template=%s" % template)
if template == None:
self.logger.trace("processConfigItem: template was not found...")
if action == 'W':
if k == 'J2CActivationSpec':
self.logger.trace("processConfigItem: key is J2CActivationSpec so fixing attribute list")
attr = AdminConfig.list('ActivationSpec', AdminConfig.getid(v['scope']))
attrList.append(['activationSpec', attr])
elif k == 'J2CAdminObject':
self.logger.trace("processConfigItem: key is J2CAdminObject so fixing attribute list")
attr = AdminConfig.list('AdminObject', AdminConfig.getid(v['scope']))
attrList.append(['adminObject', attr])
elif k == 'J2CConnectionFactory':
self.logger.trace("processConfigItem: key is J2CConnectionFactory so fixing attribute list")
attr = AdminConfig.list('ConnectionDefinition', AdminConfig.getid(v['scope']))
attrList.append(['connectionDefinition', attr])
self.logger.info("processConfigItem: creating %s:%s:%s" % (AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'name'), k, v['name']))
self.logger.debug("processConfigItem: command=AdminConfig.create('%s', %s, %s)" % (k, AdminConfig.getid(v['scope']), attrList))
AdminConfig.create('%s' % k, AdminConfig.getid(v['scope']), attrList)
else:
self.logger.warn("processConfigItem: action is set to %s. Item %s:%s:%s will not be created. Attribute and properties for this object will not exist and may cause failures in this script." % (action, AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'name'), k, v['name']))
#end-if
else:
self.logger.trace("processConfigItem: template was found...")
if action == 'W':
self.logger.info("processConfigItem: creating %s:%s:%s" % (AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'name'), k, v['name']))
self.logger.trace("processConfigItem: template=%s" % template)
self.logger.debug("processConfigItem: command=AdminConfig.createUsingTemplate('%s', %s, %s, %s)" % (k, AdminConfig.getid(v['scope']), attrList, template))
AdminConfig.createUsingTemplate('%s' % k, AdminConfig.getid(v['scope']), attrList, template)
else:
self.logger.warn("processConfigItem: action is set to %s. Item %s:%s:%s will not be created. Attribute and properties for this object will not exist and may cause failures in this script." % (action, AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'name'), k, v['name']))
#end-if
#end-if
#end-if
else:
for key in v.keys():
if key != 'scope':
actual = AdminConfig.showAttribute(obj, key)
self.logger.trace("processConfigItem: attribute=%s, value=%s" % (key, actual))
if actual != v[key]:
if action == 'W':
self.logger.info("processConfigItem: modifying actual=%s to %s" % (actual,v[key]))
self.logger.debug("processConfigItem: command=AdminConfig.modify(%s, [['%s', '%s']])" % (obj, key, v[key]))
AdminConfig.modify(obj, [[key, v[key]]])
else:
self.logger.warn("processPropertySet: audit failure %s:%s, actual=%s config=%s" % (AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'name'), (AdminConfig.showAttribute(obj, 'name')), (AdminConfig.showAttribute(obj, key)), v[key]))
def generateCommands(self, cmdList=None, action=None):
'''Method that takes a list of command dictionaries and processes them. Use this method to process a series or sequential commands.'''
self.action = action
if self.action == None:
self.action = 'R'
self.cmdList = cmdList
self.logger.info("generateCommands: processing command list.")
if self.cmdList == None:
self.logger.error("generateCommands: No list was passed to the generateCommands method")
raise ProcessCommandException("No list was passed to the generateCommands method")
self.logger.info("generateCommands: action is %s" % self.action)
self.logger.trace("generateCommands: self.cmdList = %s " % self.cmdList)
for item in self.cmdList:
cmdDict = item
self.logger.trace("generateCommands: item = %s" % item)
for k, v in cmdDict.items():
self.logger.trace("generateCommands: k = %s" % k )
self.logger.trace("generateCommands: v = %s" % v )
if k == "Cell":
self.logger.debug("generateCommands: block = Cell")
if AdminControl.getCell() != v['name']:
self.logger.error("generateCommands: Cell name %s != %s. You may have connected to the wrong WebSphere environment or the name of the cell in the configuration xml is not correct." % (AdminControl.getCell(),v['name']))
raise ProcessCommandException("Cell name %s != %s. You may have connected to the wrong WebSphere environment or the name of the cell in the configuration xml is not correct." % (AdminControl.getCell(),v['name']))
elif k == "ServerCluster":
self.logger.trace("generateCommands: block = ServerCluster")
'''IMPLEMENT ME'''
elif re.search("ClusterMember", k):
self.logger.trace("generateCommands: block = ClusterMember")
'''IMPLEMENT ME'''
elif k == "Server":
self.logger.trace("generateCommands: block = Server")
self.processServer(cmdDict=cmdDict, action=self.action)
elif k == "DataSource" or k == "MQQueueConnectionFactory" or k == 'MQQueue' or k == "JDBCProvider" or k == 'J2CActivationSpec' or k == 'J2CAdminObject' or k == 'J2CConnectionFactory':
self.logger.trace("generateCommands: block = JDBCProvider, DataSource, MQQueueConnectionFactory, MQQueue, J2CActivationSpec, J2CAdminObject, J2CConnectionFactory")
self.processConfigItem(cmdDict=cmdDict, action=self.action)
elif k == "J2EEResourceProperty":
self.logger.trace("generateCommands: block = J2EEResourceProperty")
self.processPropertySet(cmdDict=cmdDict, action=self.action)
elif k == "JAASAuthData":
self.logger.trace("generateCommands: block = JAASAuthData")
self.processSecurity(cmdDict=cmdDict, action=self.action)
elif k == "ConnectionPool" or k == "connectionPool" or k == "sessionPool" or k == 'EJBCache' or k == 'PMIService' or k == 'PMIRequestMetrics':
self.logger.trace("generateCommands: block = ConnectionPool, connectionPool, sessionPool")
self.processNestedAttribute(cmdDict=cmdDict, action=self.action)
elif k == "JavaVirtualMachine" or k == "ProcessExecution":
self.logger.trace("generateCommands: block = JavaVirtualMachine, ProcessExecution")
self.processNestedAttribute(cmdDict=cmdDict, action=self.action)
elif k == 'SIBus' or k == 'SIBusMember' or k == 'SIBTopicSpace' or k == 'SIBQueue':
self.logger.trace("generateCommands: block = SIBus, SIBusMember, SIBTopicSpace, SIBQueue")
self.processAdminTask(cmdDict=cmdDict, action=self.action)
elif k == "env" or k == "Node" or k == 'dmgr' or k == 'JMSProvider' or k == 'J2CResourceAdapter':
self.logger.trace("generateCommands: block = env, Node, dmgr")
'''Ignore a tag'''
self.logger.debug("generateCommands: ignoring tag %s" % k )
else:
'''Throw an exception if the tag is unknown'''
self.logger.error("generateCommands: %s is an unknown key. Remove it from the configuration or add code to handle it." % k)
raise ProcessCommandException("generateCommands: %s is an unknown key. Remove it from the configuration or add code to handle it." % k)
#end-if
self.logger.debug("generateCommands: config save status is %s" % AdminConfig.hasChanges())
if AdminConfig.hasChanges() == 1:
self.logger.info("generateCommands: saving changes.")
AdminConfig.save()
def processPropertySet(self, cmdDict=None, action=None):
'''processPropertySet: This method processes a single configuration object. It takes two parameters, a dictionary containing the command and the action (RW)'''
self.logger.trace("processPropertySet: cmdDict=%s" % cmdDict)
if cmdDict == None:
self.logger.error("processPropertySet: No dictionary was passed to the generateCommands method")
raise ProcessCommandException("No dictionary was passed to the generateCommands method")
#end-if
k = cmdDict.keys()[0]
v = cmdDict.values()[0]
self.logger.trace("processPropertySet: key=%s, value=%s" % (k, v))
try:
self.validateScope(v, 'processPropertySet')
except ProcessCommandException:
self.logger.info("processPropertySet: Skipping propertyset %s:%s " % (k, v))
else:
self.propSet = None
try:
self.logger.trace("processPropertySet: locating property set...")
self.propSet=AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'propertySet')
self.logger.trace("processPropertySet: property set found.")
except ScriptingException, msg:
self.logger.trace("processPropertySet: msg=%s" % msg)
self.logger.trace("processPropertySet: property set not found.")
self.logger.trace("processPropertySet: propSet=%s " % self.propSet)
self.propList = AdminConfig.list(k, AdminConfig.getid(v['scope'])).splitlines()
self.logger.trace("processPropertySet: self.propList=%s " % self.propList)
for key in v.keys():
if key == 'name':
self.logger.trace("processPropertySet: key=%s, value=%s" % (key, v[key]))
itemFound="1"
for item in self.propList:
self.logger.trace("processPropertySet: name=%s" % AdminConfig.showAttribute(item, 'name'))
if AdminConfig.showAttribute(item, 'name') == v[key]:
self.logger.trace("processPropertySet: actual name=%s, value=%s" % (AdminConfig.showAttribute(item, 'name'), AdminConfig.showAttribute(item, 'value')))
self.logger.trace("processPropertySet: config name=%s, value=%s" % (v['name'], v['value']))
if AdminConfig.showAttribute(item, 'value') != v['value']:
if action == 'W':
self.logger.info("processPropertySet: modifying %s:%s:%s=%s" % (AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'name'), AdminConfig.showAttribute(item, 'name'), 'value', v['value']))
self.logger.debug("processPropertySet: command=AdminConfig.modify(%s, [[%s, %s]])" % (item, 'value', v['value']))
AdminConfig.modify(item, [['value', v['value']]])
else:
self.logger.warn("processPropertySet: audit failure %s:%s, actual=%s config=%s" % (AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'name'), (AdminConfig.showAttribute(item, 'name')), AdminConfig.showAttribute(item, 'value'), v['value']))
#end-if
else:
self.logger.debug("processPropertySet: ignoring %s %s" % (AdminConfig.showAttribute(item, 'name'), AdminConfig.showAttribute(item, 'value')))
#end-if
itemFound = "0"
break
#end-if
#end-for
if itemFound == "1":
if self.propSet != None:
self.logger.info("processPropertySet: creating %s:%s:%s=%s" % (AdminConfig.showAttribute(AdminConfig.getid(v['scope']), 'name'), v[key], 'value', v['value']))
self.logger.debug("processPropertySet: command=AdminConfig.create(%s, %s, [['name', '%s'],['type', '%s'],['value', '%s'],['required', '%s'])" % (k, self.propSet, v[key], v['type'], v['value'], v['required']))
AdminConfig.create(k, self.propSet, [['name', v[key]],['type', v['type']],['value', v['value']],['required', v['required']]])
else:
self.logger.ERROR("processPropertySet: You tried to create a new property but the configuration does not have a property set. You will need to to write some code to deal with this because I haven't done it yet :-)")
def generateCommands(self, cmdList=None, action=None):
'''Method that takes a list of command dictionaries and processes them. Use this method to process a series or sequential commands.'''
self.action = action
if self.action == None:
self.action = 'R'
self.cmdList = cmdList
self.logger.info("generateCommands: processing command list.")
if self.cmdList == None:
self.logger.error("generateCommands: No list was passed to the generateCommands method")
raise ProcessCommandException("No list was passed to the generateCommands method")
self.logger.info("generateCommands: action is %s" % self.action)
self.logger.trace("generateCommands: self.cmdList = %s " % self.cmdList)
for item in self.cmdList:
cmdDict = item
self.logger.trace("generateCommands: item = %s" % item)
for k, v in cmdDict.items():
self.logger.trace("generateCommands: k = %s" % k )
self.logger.trace("generateCommands: v = %s" % v )
if k == "Cell":
self.logger.debug("generateCommands: block = Cell")
if AdminControl.getCell() != v['name']:
self.logger.error("generateCommands: Cell name %s != %s. You may have connected to the wrong WebSphere environment or the name of the cell in the configuration xml is not correct." % (AdminControl.getCell(),v['name']))
raise ProcessCommandException("Cell name %s != %s. You may have connected to the wrong WebSphere environment or the name of the cell in the configuration xml is not correct." % (AdminControl.getCell(),v['name']))
elif k == "ServerCluster":
self.logger.trace("generateCommands: block = ServerCluster")
'''IMPLEMENT ME'''
elif re.search("ClusterMember", k):
self.logger.trace("generateCommands: block = ClusterMember")
'''IMPLEMENT ME'''
elif k == "Server":
self.logger.trace("generateCommands: block = Server")
self.processServer(cmdDict=cmdDict, action=self.action)
elif k == "DataSource" or k == "MQQueueConnectionFactory" or k == 'MQQueue' or k == "JDBCProvider" or k == 'J2CActivationSpec' or k == 'J2CAdminObject' or k == 'J2CConnectionFactory':
self.logger.trace("generateCommands: block = JDBCProvider, DataSource, MQQueueConnectionFactory, MQQueue, J2CActivationSpec, J2CAdminObject, J2CConnectionFactory")
self.processConfigItem(cmdDict=cmdDict, action=self.action)
elif k == "J2EEResourceProperty":
self.logger.trace("generateCommands: block = J2EEResourceProperty")
self.processPropertySet(cmdDict=cmdDict, action=self.action)
elif k == "JAASAuthData":
self.logger.trace("generateCommands: block = JAASAuthData")
self.processSecurity(cmdDict=cmdDict, action=self.action)
elif k == "ConnectionPool" or k == "connectionPool" or k == "sessionPool" or k == 'EJBCache' or k == 'PMIService' or k == 'PMIRequestMetrics':
self.logger.trace("generateCommands: block = ConnectionPool, connectionPool, sessionPool")
self.processNestedAttribute(cmdDict=cmdDict, action=self.action)
elif k == "JavaVirtualMachine" or k == "ProcessExecution":
self.logger.trace("generateCommands: block = JavaVirtualMachine, ProcessExecution")
self.processNestedAttribute(cmdDict=cmdDict, action=self.action)
elif k == 'SIBus' or k == 'SIBusMember' or k == 'SIBTopicSpace' or k == 'SIBQueue':
self.logger.trace("generateCommands: block = SIBus, SIBusMember, SIBTopicSpace, SIBQueue")
self.processAdminTask(cmdDict=cmdDict, action=self.action)
elif k == "env" or k == "Node" or k == 'dmgr' or k == 'JMSProvider' or k == 'J2CResourceAdapter':
self.logger.trace("generateCommands: block = env, Node, dmgr")
'''Ignore a tag'''
self.logger.debug("generateCommands: ignoring tag %s" % k )
else:
'''Throw an exception if the tag is unknown'''
self.logger.error("generateCommands: %s is an unknown key. Remove it from the configuration or add code to handle it." % k)
raise ProcessCommandException("generateCommands: %s is an unknown key. Remove it from the configuration or add code to handle it." % k)
#end-if
self.logger.debug("generateCommands: config save status is %s" % AdminConfig.hasChanges())
if AdminConfig.hasChanges() == 1:
self.logger.info("generateCommands: saving changes.")
AdminConfig.save()
def getServers(types):
servers = []
for server in wsadminToList(AdminConfig.getid("/Server:/")):
if AdminConfig.showAttribute(server, "serverType") in types:
servers.append(ConfigObject(server))
return servers
def SaveConfig(self):
AdminConfig.save()
def processSecurity(self, cmdDict=None, action=None):
'''Used to process security properties'''
self.logger.trace("processPropertySet: cmdDict=%s" % cmdDict)
if cmdDict == None:
self.logger.error("processPropertySet: No dictionary was passed to the generateCommands method")
raise ProcessCommandException("No dictionary was passed to the generateCommands method")
#end-if
k = cmdDict.keys()[0]
v = cmdDict.values()[0]
self.logger.trace("processSecrurity: key=%s, value=%s" % (k, v))
if k and v != None:
self.validateScope(v, 'processSecurity')
self.jaasAuthDataList = AdminConfig.list(k, AdminConfig.getid('%sSecurity:/' % v['scope'])).splitlines()
self.logger.trace("processSecrurity: jaasAuthDataList=%s"% self.jaasAuthDataList)
for key in v.keys():
if key == 'alias':
self.logger.trace("processSecrurity: key=%s, value=%s" % (key, v[key]))
itemFound="1"
self.logger.trace("processSecrurity: items length is=%s" % len(self.jaasAuthDataList))
for item in self.jaasAuthDataList:
self.logger.trace("processSecrurity: item=%s" % item)
if item != "":
self.logger.trace("processSecrurity: name=%s" % AdminConfig.showAttribute(item, 'alias'))
if AdminConfig.showAttribute(item, 'alias') == v[key]:
self.logger.trace("processSecrurity: checking alias %s" % AdminConfig.showAttribute(item,'alias'))
for key in v.keys():
if key != 'scope':
self.logger.trace("processSecrurity: key=%s" % key)
if AdminConfig.showAttribute(item, key) != v[key]:
self.logger.trace("processSecrurity: alias:%s, key=%s, actual=%s, config=%s" % (AdminConfig.showAttribute(item,'alias'), key, AdminConfig.showAttribute(item, key), v[key]))
if action == 'W':
self.logger.info("processSecrurity: modifying %s:%s=%s" % (AdminConfig.showAttribute(item,'alias'), key, v[key]))
self.logger.debug("processSecrurity: command=AdminConfig.modify(%s, [[%s, %s]])" % (AdminConfig.showAttribute(item,'alias'), key, v[key]))
AdminConfig.modify(item, [[key, v[key]]])
else:
self.logger.warn("processSecrurity: audit failure %s:, actual=%s config=%s" % (AdminConfig.showAttribute(item,'alias'), AdminConfig.showAttribute(item, key), v[key]))
#end-if
#end-if
#end-if
#end-for
itemFound = "0"
break
#end-if
#end-if
#end-for
if itemFound == "1":
self.logger.info("processSecrurity: creating %s:%s" % (k, v['alias']))
attrList = []
for key in v.keys():
if key != 'scope':
attrList.append([key, v[key]])
if action == 'W':
self.logger.debug("processSecrurity: command=AdminConfig.create(%s, %s, %s)" % (k, AdminConfig.getid('%sSecurity:/' % v['scope']), attrList))
AdminConfig.create(k, AdminConfig.getid('%sSecurity:/' % v['scope']), attrList)
else:
self.logger.warn("processSecrurity: action is %s so this item will not be created %s:%s" % (action, k, v['alias']))
#end-if
#end-if
#end-for
else:
self.logger.error("processPropertySet: key and value parameters were not suppled to the method.")
raise ProcessCommandException("key and value parameters were not suppled to the method.")
