def Run():
inst_type = _RunSubp(
"curl -s http://169.254.169.254/latest/meta-data/instance-type")
ami_id = _RunSubp("curl -s http://169.254.169.254/latest/meta-data/ami-id")
public_ip = _RunSubp(
"curl -s http://169.254.169.254/latest/meta-data/public-ipv4")
#Cons.P(ec2_inst_type)
#Cons.P(ami_id)
#Cons.P(public_ip)
# Get current datetime, hostname, instance type, ebs type
global _fn_log0, _fn_log1
_fn_log0 = "%s-%s-%s-%s" % (inst_type, datetime.datetime.now().strftime(
"%y%m%d-%H%M%S"), ami_id, public_ip)
_fn_log1 = "../log/ioping/%s" % _fn_log0
with Cons.MeasureTime("Setting up ..."):
dn_rand_data = "/mnt/ebs-ssd1/rand-data"
#Util.RunSubp("rm -rf %s" % dn_rand_data)
Util.RunSubp("mkdir -p %s" % dn_rand_data)
Util.RunSubp(
"dd if=/dev/zero of=%s/zeros bs=1M count=1000 > /dev/null 2>&1" %
dn_rand_data)
Util.RunSubp("mkdir -p /mnt/ebs-ssd1/ioping-tmp")
#Cons.P("Logging to %s" % _fn_log0)
Util.RunSubp("mkdir -p ../log/ioping")
Util.RunSubp("touch %s" % _fn_log1)
fn_rand_data = None
while True:
_MeasurePerf()
if fn_rand_data == None:
fn_rand_data = "%s/%s" % (dn_rand_data, datetime.datetime.now().
strftime("%y%m%d-%H%M%S"))
else:
# Make a new file when the file size becomes too big
filesize = os.path.getsize(fn_rand_data)
if filesize > 20 * 1024 * 1024 * 1024:
fn_rand_data = "%s/%s" % (dn_rand_data, datetime.datetime.now(
).strftime("%y%m%d-%H%M%S"))
# /dev/urandom too slow. http://serverfault.com/questions/6440/is-there-an-alternative-to-dev-urandom
# dd if=/dev/urandom of=$dn_rand_data/`date +"%y%m%d-%H%M%S.%N"` bs=1M count=20 > /dev/null 2>&1
#
# When the device gets full, it raises an exception and terminates.
# It took 4 days and 12 hours to fill the 16TB EBS SSD volume.
# start: 160422-220627
# end : 160427-093745
cmd = "(openssl enc -aes-256-ctr" \
" -pass pass:\"$(dd if=/dev/urandom bs=128 count=1 2>/dev/null | base64)\" -nosalt" \
" < %s/zeros >> %s)" \
" && sync" \
% (dn_rand_data, fn_rand_data)
_RunSubp(cmd)
sys.stdout.write(".")
sys.stdout.flush()
def Run():
with Cons.MeasureTime("Running an EC2 instance ..."):
global _boto_client
if _boto_client == None:
_boto_client = boto3.client("ec2")
inst_id = _RunEc2InstI2Xlarge()
_KeepCheckingInst(inst_id)
def _PlotRandW4kLog(fn):
fn_in = "plot-data/%s" % fn
fn_out = "plot-data/randw-4k-lat-log-%s.pdf" % fn
with Cons.MeasureTime("Plotting %s" % fn_out):
env = os.environ.copy()
env["FN_IN"] = fn_in
env["FN_OUT"] = fn_out
Util.RunSubp("gnuplot %s/randw-4k-log.gnuplot" % os.path.dirname(__file__), env)
Cons.P("Created %s %d" % (fn_out, os.path.getsize(fn_out)))
def Setup():
with Cons.MeasureTime("Setting up EBS SSD ..."):
Util.RunSubp("sudo mkdir -p /mnt/ebs-ssd1")
Util.RunSubp("sudo umount /dev/xvdc || true")
# TODO: Are EBS volumes come TRIMmed when they are allocated?
Util.RunSubp("sudo mkfs.ext4 -m 0 -E nodiscard -L ebs-ssd1 /dev/xvdc")
# -o discard for TRIM
Util.RunSubp("sudo mount -t ext4 -o discard /dev/xvdc /mnt/ebs-ssd1")
Util.RunSubp("sudo chown -R ubuntu /mnt/ebs-ssd1")
def _PlotSeqW100m(fn):
fn_in = "plot-data/%s" % fn
fn_out = "plot-data/seqw-100m-lat-%s.pdf" % fn
with Cons.MeasureTime("Plotting %s" % fn_out):
env = os.environ.copy()
env["FN_IN"] = fn_in
env["FN_OUT"] = fn_out
Util.RunSubp("gnuplot %s/seqw-100m.gnuplot" % os.path.dirname(__file__), env)
Cons.P("Created %s %d" % (fn_out, os.path.getsize(fn_out)))
def Setup():
with Cons.MeasureTime("Setting up local SSD ..."):
Util.RunSubp("sudo mkdir -p /mnt/local-ssd1")
Util.RunSubp("sudo umount /dev/xvdb || true")
# Instance store volumes come TRIMmed when they are allocated. Without
# nodiscard, it takes about 80 secs for a 800GB SSD.
Util.RunSubp("sudo mkfs.ext4 -m 0 -E nodiscard -L local-ssd1 /dev/xvdb")
# -o discard for TRIM
Util.RunSubp("sudo mount -t ext4 -o discard /dev/xvdb /mnt/local-ssd1")
Util.RunSubp("sudo chown -R ubuntu /mnt/local-ssd1")
def _SetHostnameWithAzPubIp():
with Cons.MeasureTime("Setting hostname"):
az = Util.RunSubp(
"curl -s http://169.254.169.254/latest/meta-data/placement/availability-zone"
)
pub_ip = Util.RunSubp(
"curl -s http://169.254.169.254/latest/meta-data/public-ipv4")
hn = "%s-%s" % (az, pub_ip.split(".")[-1])
Cons.P("hostname: %s" % hn)
# http://askubuntu.com/questions/9540/how-do-i-change-the-computer-name
cmd = "sudo sh -c 'echo \"%s\" > /etc/hostname'" % hn
Util.RunSubp(cmd, shell=True)
cmd = "sudo sed -i '/^127.0.0.1 localhost.*/c\\127.0.0.1 localhost %s' /etc/hosts" % hn
Util.RunSubp(cmd, shell=True)
cmd = "sudo service hostname restart"
Util.RunSubp(cmd)
def _GenLocalSsdData(fn):
fn_plot_data = "plot-data/%s" % fn
fn_raw = "../log/ioping/%s" % fn
# Uncompress the raw files if not exist
if not os.path.isfile(fn_raw):
with Cons.MeasureTime("file %s doesn't exist. uncompressing from the archive" % fn_raw):
cmd = "7z x -o../log/ioping %s.7z" % fn_raw
Util.RunSubp(cmd)
# Generate one if not exist. Skip for now. It's fast enough.
#if os.path.isfile(fn_plot_data):
# Cons.P("%s already exists" % fn_plot_data)
# return
if not os.path.exists("plot-data"):
os.makedirs("plot-data")
with Cons.MeasureTime("Generating plot data %s" % fn_plot_data):
with open(fn_raw) as fo_r, open(fn_plot_data, "w") as fo_w:
fmt = "%13s" \
" %5.1f" \
" %3d %3d %5d %4d" \
" %3d %3d %5d %3d" \
" %6d"
fo_w.write("%s\n" % Util.BuildHeader(fmt,
"datetime" \
" blocks_used_percent" \
" rr_4k_min rr_4k_avg rr_4k_max rr_4k_sd" \
" rw_4k_min rw_4k_avg rw_4k_max rw_4k_sd" \
" seqw_100m"
))
# 160425-011752
# 100 17430 5737 23499713 170 174 211 5
# 100 14822 6747 27634597 134 148 231 17
# 1 216553 5 484212179 216553 216553 216553 0
# Filesystem 1K-blocks Used Available Use% Mounted on
# /dev/xvda1 8115168 2545256 5134636 34% /
# /dev/xvdb 769018760 173080 768829296 1% /mnt/local-ssd1
i = 0
dt = None
block_used_percent_prev = None
blocks_total = None
blocks_used = None
rr_4k_min = None
rr_4k_avg = None
rr_4k_max = None
rr_4k_sd = None
rw_4k_min = None
rw_4k_avg = None
rw_4k_max = None
rw_4k_sd = None
seqw_100m = None
for line in fo_r.readlines():
#Cons.P(line)
if i == 0:
dt = line.strip()
# 4k rand read
elif i == 1:
t = line.split()
if len(t) != 8:
raise RuntimeError("Unexpected format [%s]" % line)
# All in us
rr_4k_min = int(t[4])
rr_4k_avg = int(t[5])
rr_4k_max = int(t[6])
rr_4k_sd = int(t[7])
elif i == 2:
t = line.split()
if len(t) != 8:
raise RuntimeError("Unexpected format [%s]" % line)
# All in us
rw_4k_min = int(t[4])
rw_4k_avg = int(t[5])
rw_4k_max = int(t[6])
rw_4k_sd = int(t[7])
elif i == 3:
t = line.split()
if len(t) != 8:
raise RuntimeError("Unexpected format [%s]" % line)
# All of the min, avg, max are the same since there is only 1 request
# at a time.
seqw_100m = int(t[4])
elif i == 6:
t = line.split()
if (len(t) != 6) or (t[0] != "/dev/xvdb"):
raise RuntimeError("Unexpected format [%s]" % line)
blocks_total = int(t[1])
blocks_used = int(t[2])
i += 1
if i == 7:
block_used_percent = round(100.0 * blocks_used / blocks_total, 1)
if block_used_percent_prev != block_used_percent:
fo_w.write((fmt + "\n") % (dt
, (100.0 * blocks_used / blocks_total)
, rr_4k_min, rr_4k_avg, rr_4k_max, rr_4k_sd
, rw_4k_min, rw_4k_avg, rw_4k_max, rw_4k_sd
, seqw_100m
))
block_used_percent_prev = block_used_percent
i = 0
dt = None
blocks_total = None
blocks_used = None
rr_4k_min = None
rr_4k_avg = None
rr_4k_max = None
rr_4k_sd = None
rw_4k_min = None
rw_4k_avg = None
rw_4k_max = None
rw_4k_sd = None
seqw_100m = None
Cons.P("Created %s %d" % (fn_plot_data, os.path.getsize(fn_plot_data)))
def _GenEbsSsdData(fn0, fn1):
fn_plot_data = "plot-data/%s" % fn1
fn_raw0 = "../log/ioping/%s" % fn0
fn_raw1 = "../log/ioping/%s" % fn1
# Generate one if not exist. Skip for now. It's fast enough.
#if os.path.isfile(fn_plot_data):
# Cons.P("%s already exists" % fn_plot_data)
# return
# Uncompress the raw files if not exist
for fn in [fn_raw0, fn_raw1]:
if not os.path.isfile(fn):
with Cons.MeasureTime("file %s doesn't exist. uncompressing from the archive" % fn):
cmd = "7z x -o../log/ioping %s.7z" % fn
Util.RunSubp(cmd)
if not os.path.exists("plot-data"):
os.makedirs("plot-data")
with Cons.MeasureTime("Generating plot data %s" % fn_plot_data):
with open(fn_plot_data, "w") as fo_w, open(fn_raw0) as fo_r0, open(fn_raw1) as fo_r1:
fmt = "%13s" \
" %5.1f" \
" %3d %4d %5d %4d" \
" %3d %4d %5d %4d" \
" %6d"
fo_w.write("%s\n" % Util.BuildHeader(fmt,
"datetime" \
" blocks_used_percent" \
" rr_4k_min rr_4k_avg rr_4k_max rr_4k_sd" \
" rw_4k_min rw_4k_avg rw_4k_max rw_4k_sd" \
" seqw_100m"
))
#160423-195525
#100 68474 1460 5981833 230 685 1631 568
#100 74883 1335 5469866 495 749 4723 585
#1 1690975 1 62010142 1690975 1690975 1690975 0
#Filesystem 1K-blocks Used Available Use% Mounted on
#/dev/xvda1 8115168 2676196 5003696 35% /
#/dev/xvdc 17111375772 1565491700 15545867688 10% /mnt/ebs-ssd1
i = 0
dt = None
block_used_percent_prev = None
blocks_total = None
blocks_used = None
rr_4k_min = None
rr_4k_avg = None
rr_4k_max = None
rr_4k_sd = None
rw_4k_min = None
rw_4k_avg = None
rw_4k_max = None
rw_4k_sd = None
seqw_100m = None
for fo_r in [fo_r0, fo_r1]:
for line in fo_r.readlines():
#Cons.P("%d [%s]" % (i, line.strip()))
if i == 0:
dt = line.strip()
# 4k rand read
elif i == 1:
t = line.split()
if len(t) != 8:
raise RuntimeError("Unexpected format [%s]" % line)
# All in us
rr_4k_min = int(t[4])
rr_4k_avg = int(t[5])
rr_4k_max = int(t[6])
rr_4k_sd = int(t[7])
elif i == 2:
t = line.split()
if len(t) != 8:
raise RuntimeError("Unexpected format [%s]" % line)
# All in us
rw_4k_min = int(t[4])
rw_4k_avg = int(t[5])
rw_4k_max = int(t[6])
rw_4k_sd = int(t[7])
elif i == 3:
t = line.split()
if len(t) != 8:
raise RuntimeError("Unexpected format [%s]" % line)
# All of the min, avg, max are the same since there is only 1 request
# at a time.
seqw_100m = int(t[4])
elif i == 6:
t = line.split()
if (len(t) != 6) or (t[0] != "/dev/xvdc"):
raise RuntimeError("Unexpected format [%s]" % line)
blocks_total = int(t[1])
blocks_used = int(t[2])
i += 1
if i == 7:
block_used_percent = round(100.0 * blocks_used / blocks_total, 1)
if block_used_percent_prev != block_used_percent:
fo_w.write((fmt + "\n") % (dt
, (100.0 * blocks_used / blocks_total)
, rr_4k_min, rr_4k_avg, rr_4k_max, rr_4k_sd
, rw_4k_min, rw_4k_avg, rw_4k_max, rw_4k_sd
, seqw_100m
))
block_used_percent_prev = block_used_percent
i = 0
dt = None
blocks_total = None
blocks_used = None
rr_4k_min = None
rr_4k_avg = None
rr_4k_max = None
rr_4k_sd = None
rw_4k_min = None
rw_4k_avg = None
rw_4k_max = None
rw_4k_sd = None
seqw_100m = None
Cons.P("Created %s %d" % (fn_plot_data, os.path.getsize(fn_plot_data)))
