def doFileLoadThread(self):
for obj in self.objectList:
if obj.filename is not None and os.path.isfile(obj.filename) and obj.fileTime != os.stat(obj.filename).st_mtime:
obj.fileTime = os.stat(obj.filename).st_mtime
mesh = meshLoader.loadMesh(obj.filename)
obj.mesh = mesh
obj.dirty = True
obj.steepDirty = True
self.updateModelTransform()
self.glCanvas.zoom = self.objectsBoundaryCircleSize * 6.0
self.errorList = []
wx.CallAfter(self.updateToolbar)
wx.CallAfter(self.glCanvas.Refresh)
if os.path.isfile(self.gcodeFilename) and self.gcodeFileTime != os.stat(self.gcodeFilename).st_mtime:
self.gcodeFileTime = os.stat(self.gcodeFilename).st_mtime
self.gcodeDirty = True
self.gcode = gcodeInterpreter.gcode()
self.gcode.progressCallback = self.loadProgress
self.gcode.load(self.gcodeFilename)
errorList = []
for line in open(self.gcodeFilename, "rt"):
res = re.search(';Model error\(([a-z ]*)\): \(([0-9\.\-e]*), ([0-9\.\-e]*), ([0-9\.\-e]*)\) \(([0-9\.\-e]*), ([0-9\.\-e]*), ([0-9\.\-e]*)\)', line)
if res is not None:
v1 = util3d.Vector3(float(res.group(2)), float(res.group(3)), float(res.group(4)))
v2 = util3d.Vector3(float(res.group(5)), float(res.group(6)), float(res.group(7)))
errorList.append([v1, v2])
self.errorList = errorList
wx.CallAfter(self.updateToolbar)
wx.CallAfter(self.glCanvas.Refresh)
elif not os.path.isfile(self.gcodeFilename):
self.gcode = None
wx.CallAfter(self.checkReloadFileTimer.Start, 1000)
def LoadGCodeFile(self, filename):
if self.machineCom != None and self.machineCom.isPrinting():
return
#Send an initial M110 to reset the line counter to zero.
prevLineType = lineType = 'CUSTOM'
gcodeList = ["M110"]
for line in open(filename, 'r'):
if line.startswith(';TYPE:'):
lineType = line[6:].strip()
if ';' in line:
line = line[0:line.find(';')]
line = line.strip()
if len(line) > 0:
if prevLineType != lineType:
gcodeList.append((line, lineType, ))
else:
gcodeList.append(line)
prevLineType = lineType
gcode = gcodeInterpreter.gcode()
gcode.loadList(gcodeList)
#print "Loaded: %s (%d)" % (filename, len(gcodeList))
self.filename = filename
self.gcode = gcode
self.gcodeList = gcodeList
wx.CallAfter(self.progress.SetRange, len(gcodeList))
wx.CallAfter(self.UpdateButtonStates)
wx.CallAfter(self.UpdateProgress)
wx.CallAfter(self.SetTitle, 'Printing: %s' % (filename))
def OnDropFiles(self, files):
#if len(files) > 0:
#profile.setPluginConfig([])
#self.updateProfileToControls()
profile.putPreference('lastFile', files[0])
gcodeFilename = None
for filename in files:
self.addToModelMRU(filename)
ext = filename[filename.rfind('.')+1:].upper()
if ext == 'G' or ext == 'GCODE':
gcodeFilename = filename
if gcodeFilename is not None:
if self.scene._gcode is not None:
self.scene._gcode = None
for layerVBOlist in self.scene._gcodeVBOs:
for vbo in layerVBOlist:
self.scene.glReleaseList.append(vbo)
self.scene._gcodeVBOs = []
self.scene._gcode = gcodeInterpreter.gcode()
self.scene._gcodeFilename = gcodeFilename
self.scene.printButton.setBottomText('')
self.scene.setModelView(4)
self.scene.printButton.setDisabled(False)
self.scene.OnSliceDone(gcodeFilename)
self.scene.OnViewChange()
else:
if self.scene.getModelView() == 4:
self.scene.setModelView(0)
self.scene.OnViewChange()
self.scene.loadScene(files)
def _updateSliceProgress(self, progressValue, ready):
if not ready:
if self.printButton.getProgressBar() is not None and progressValue >= 0.0 and abs(self.printButton.getProgressBar() - progressValue) < 0.01:
return
self.printButton.setDisabled(not ready)
if progressValue >= 0.0:
self.printButton.setProgressBar(progressValue)
else:
self.printButton.setProgressBar(None)
if self._gcode is not None:
self._gcode = None
for layerVBOlist in self._gcodeVBOs:
for vbo in layerVBOlist:
self.glReleaseList.append(vbo)
self._gcodeVBOs = []
if ready:
self.printButton.setProgressBar(None)
cost = self._slicer.getFilamentCost()
if cost is not None:
self.printButton.setBottomText('%s\n%s\n%s' % (self._slicer.getPrintTime(), self._slicer.getFilamentAmount(), cost))
else:
self.printButton.setBottomText('%s\n%s' % (self._slicer.getPrintTime(), self._slicer.getFilamentAmount()))
self._gcode = gcodeInterpreter.gcode()
self._gcodeFilename = self._slicer.getGCodeFilename()
else:
self.printButton.setBottomText('')
self.QueueRefresh()
def LoadGCodeFile(self, filename):
if self.machineCom is not None and self.machineCom.isPrinting():
return
#Send an initial M110 to reset the line counter to zero.
prevLineType = lineType = 'CUSTOM'
gcodeList = ["M110"]
for line in open(filename, 'r'):
if line.startswith(';TYPE:'):
lineType = line[6:].strip()
if ';' in line:
line = line[0:line.find(';')]
line = line.strip()
if len(line) > 0:
if prevLineType != lineType:
gcodeList.append((
line,
lineType,
))
else:
gcodeList.append(line)
prevLineType = lineType
gcode = gcodeInterpreter.gcode()
gcode.loadList(gcodeList)
#print "Loaded: %s (%d)" % (filename, len(gcodeList))
self.filename = filename
self.gcode = gcode
self.gcodeList = gcodeList
wx.CallAfter(self.progress.SetRange, len(gcodeList))
wx.CallAfter(self.UpdateButtonStates)
wx.CallAfter(self.UpdateProgress)
wx.CallAfter(self.SetTitle, 'Printing: %s' % (filename))
def doFileLoadThread(self):
for obj in self.objectList:
if obj.filename is not None and os.path.isfile(
obj.filename) and obj.fileTime != os.stat(
obj.filename).st_mtime:
obj.fileTime = os.stat(obj.filename).st_mtime
try:
mesh = meshLoader.loadMesh(obj.filename)
except:
wx.CallAfter(self.ShowWarningPopup,
'Failed to load %s' % (obj.filename))
obj.mesh = None
obj.filename = None
else:
obj.mesh = mesh
obj.dirty = True
obj.steepDirty = True
self.updateModelTransform()
if self.objectsBoundaryCircleSize is not None:
self.glCanvas.zoom = self.objectsBoundaryCircleSize * 6.0
self.errorList = []
wx.CallAfter(self.updateToolbar)
wx.CallAfter(self.glCanvas.Refresh)
elif obj.filename is None or not os.path.isfile(obj.filename):
obj.mesh = None
obj.filename = None
if os.path.isfile(
self.gcodeFilename) and self.gcodeFileTime != os.stat(
self.gcodeFilename).st_mtime:
self.gcodeFileTime = os.stat(self.gcodeFilename).st_mtime
self.gcodeDirty = True
self.gcode = gcodeInterpreter.gcode()
self.gcode.progressCallback = self.loadProgress
self.gcode.load(self.gcodeFilename)
errorList = []
for line in open(self.gcodeFilename, "rt"):
res = re.search(
';Model error\(([a-z ]*)\): \(([0-9\.\-e]*), ([0-9\.\-e]*), ([0-9\.\-e]*)\) \(([0-9\.\-e]*), ([0-9\.\-e]*), ([0-9\.\-e]*)\)',
line)
if res is not None:
v1 = util3d.Vector3(float(res.group(2)),
float(res.group(3)),
float(res.group(4)))
v2 = util3d.Vector3(float(res.group(5)),
float(res.group(6)),
float(res.group(7)))
errorList.append([v1, v2])
self.errorList = errorList
wx.CallAfter(self.updateToolbar)
wx.CallAfter(self.glCanvas.Refresh)
elif not os.path.isfile(self.gcodeFilename):
self.gcode = None
wx.CallAfter(self.checkReloadFileTimer.Start, 1000)
def __init__(self):
self._engineLog = []
self._gcodeData = StringIO.StringIO()
self._polygons = []
self._replaceInfo = {}
self._success = False
self._printTimeSeconds = None
self._filamentMM = [0.0] * 4
self._modelHash = None
self._profileString = profile.getProfileString()
self._preferencesString = profile.getPreferencesString()
self._gcodeInterpreter = gcodeInterpreter.gcode()
self._gcodeLoadThread = None
self._finished = False
def doFileLoadThread(self):
for obj in self.objectList:
if obj.filename is not None and os.path.isfile(
obj.filename) and obj.fileTime != os.stat(
obj.filename).st_mtime:
obj.fileTime = os.stat(obj.filename).st_mtime
mesh = meshLoader.loadMesh(obj.filename)
obj.mesh = mesh
obj.dirty = True
obj.steepDirty = True
self.updateModelTransform()
self.OnScaleMax(True)
self.glCanvas.zoom = numpy.max(self.objectsSize) * 3.5
self.errorList = []
wx.CallAfter(self.updateToolbar)
wx.CallAfter(self.glCanvas.Refresh)
if os.path.isfile(
self.gcodeFilename) and self.gcodeFileTime != os.stat(
self.gcodeFilename).st_mtime:
self.gcodeFileTime = os.stat(self.gcodeFilename).st_mtime
gcode = gcodeInterpreter.gcode()
gcode.progressCallback = self.loadProgress
gcode.load(self.gcodeFilename)
self.gcodeDirty = False
self.gcode = gcode
self.gcodeDirty = True
errorList = []
for line in open(self.gcodeFilename, "rt"):
res = re.search(
';Model error\(([a-z ]*)\): \(([0-9\.\-e]*), ([0-9\.\-e]*), ([0-9\.\-e]*)\) \(([0-9\.\-e]*), ([0-9\.\-e]*), ([0-9\.\-e]*)\)',
line)
if res is not None:
v1 = util3d.Vector3(float(res.group(2)),
float(res.group(3)),
float(res.group(4)))
v2 = util3d.Vector3(float(res.group(5)),
float(res.group(6)),
float(res.group(7)))
errorList.append([v1, v2])
self.errorList = errorList
wx.CallAfter(self.updateToolbar)
wx.CallAfter(self.glCanvas.Refresh)
elif not os.path.isfile(self.gcodeFilename):
self.gcode = None
wx.CallAfter(self.checkReloadFileTimer.Start, 1000)
def OnRun(self):
self.progressLog = []
p = sliceRun.startSliceCommandProcess(self.sliceCommand)
line = p.stdout.readline()
while (len(line) > 0):
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.SetProgress, progress[0], int(progress[1]),
maxValue)
else:
self.progressLog.append(line)
wx.CallAfter(self.statusText.SetLabel, line)
if self.abort:
p.terminate()
wx.CallAfter(self.statusText.SetLabel, "Aborted by user.")
return
line = p.stdout.readline()
line = p.stderr.readline()
while len(line) > 0:
line = line.rstrip()
self.progressLog.append(line)
line = p.stderr.readline()
self.returnCode = p.wait()
self.progressGauge2.SetValue(self.fileCount)
gcode = gcodeInterpreter.gcode()
gcode.load(self.resultFilename)
self.abort = True
sliceTime = time.time() - self.sliceStartTime
status = "Build: %s" % (self.resultFilename)
status += "\nSlicing took: %02d:%02d" % (sliceTime / 60,
sliceTime % 60)
status += "\nFilament: %.2fm %.2fg" % (gcode.extrusionAmount / 1000,
gcode.calculateWeight() * 1000)
status += "\nPrint time: %02d:%02d" % (int(
gcode.totalMoveTimeMinute / 60), int(
gcode.totalMoveTimeMinute % 60))
cost = gcode.calculateCost()
if cost is not None:
status += "\nCost: %s" % (cost)
profile.replaceGCodeTags(self.resultFilename, gcode)
wx.CallAfter(self.statusText.SetLabel, status)
wx.CallAfter(self.OnSliceDone)
def run(self):
p = sliceRun.startSliceCommandProcess(self.cmdList[self.fileIdx])
line = p.stdout.readline()
self.progressLog = []
maxValue = 1
while(len(line) > 0):
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.notifyWindow.SetProgress, progress[0], int(progress[1]), maxValue)
else:
self.progressLog.append(line)
wx.CallAfter(self.notifyWindow.statusText.SetLabel, line)
if self.notifyWindow.abort:
p.terminate()
wx.CallAfter(self.notifyWindow.statusText.SetLabel, "Aborted by user.")
return
line = p.stdout.readline()
line = p.stderr.readline()
while(len(line) > 0):
line = line.rstrip()
self.progressLog.append(line)
line = p.stderr.readline()
self.returnCode = p.wait()
self.fileIdx += 1
if self.fileIdx == len(self.cmdList):
if len(self.filelist) > 1:
self._stitchMultiExtruder()
gcodeFilename = sliceRun.getExportFilename(self.filelist[0])
gcodefile = open(gcodeFilename, "a")
for logLine in self.progressLog:
if logLine.startswith('Model error('):
gcodefile.write(';%s\n' % (logLine))
gcodefile.close()
wx.CallAfter(self.notifyWindow.statusText.SetLabel, "Running plugins")
ret = profile.runPostProcessingPlugins(gcodeFilename)
if ret != None:
self.progressLog.append(ret)
self.gcode = gcodeInterpreter.gcode()
self.gcode.load(gcodeFilename)
profile.replaceGCodeTags(gcodeFilename, self.gcode)
wx.CallAfter(self.notifyWindow.OnSliceDone, self)
else:
self.run()
def OnRun(self, index):
while self.cmdIndex < len(self.sliceCmdList):
cmdIndex = self.cmdIndex
self.cmdIndex += 1
action = self.sliceCmdList[cmdIndex]
wx.CallAfter(
self.SetTitle,
_("Building: [%(index)d/%(size)d]") %
(self.sliceCmdList.index(action) + 1, len(self.sliceCmdList)))
p = sliceRun.startSliceCommandProcess(action)
line = p.stdout.readline()
maxValue = 1
while (len(line) > 0):
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.SetProgress, index, progress[0],
int(progress[1]), maxValue)
else:
wx.CallAfter(self.statusText[index].SetLabel, line)
if self.abort:
p.terminate()
wx.CallAfter(self.statusText[index].SetLabel,
_("Aborted by user."))
return
line = p.stdout.readline()
self.returnCode = p.wait()
# Update output gocde file...
# Warning: the user could have changed the profile between the slcer run and this code. We might be using old information.
gcodeFilename = self.outputFilenameList[index]
gcode = gcodeInterpreter.gcode()
gcode.load(gcodeFilename)
profile.replaceGCodeTags(gcodeFilename, gcode)
wx.CallAfter(self.progressGauge[index].SetValue, 10000)
self.totalDoneFactor[index] = 0.0
wx.CallAfter(
self.progressTextTotal.SetLabel,
_("Done %(index)d/%(size)d") %
(self.cmdIndex, len(self.sliceCmdList)))
wx.CallAfter(self.progressGaugeTotal.SetValue, self.cmdIndex)
def run(self):
p = sliceRun.startSliceCommandProcess(self.cmdList[self.fileIdx])
line = p.stdout.readline()
self.progressLog = []
maxValue = 1
starttime = time.time()
while len(line) > 0:
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.notifyWindow.SetProgress, progress[0],
int(progress[1]), maxValue)
else:
self.progressLog.append("%0.2f: %s" %
(time.time() - starttime, line))
wx.CallAfter(self.notifyWindow.statusText.SetLabel, line)
if self.notifyWindow.abort:
p.terminate()
wx.CallAfter(self.notifyWindow.mainWindow.removeSliceProgress,
self.notifyWindow)
return
line = p.stdout.readline()
line = p.stderr.readline()
while len(line) > 0:
line = line.rstrip()
self.progressLog.append(line)
line = p.stderr.readline()
self.returnCode = p.wait()
self.fileIdx += 1
if self.fileIdx == len(self.cmdList):
gcodeFilename = sliceRun.getExportFilename(self.filelist[0])
gcodefile = open(gcodeFilename, "a")
for logLine in self.progressLog:
if logLine.startswith('Model error('):
gcodefile.write(';%s\n' % (logLine))
gcodefile.close()
self.gcode = gcodeInterpreter.gcode()
self.gcode.load(gcodeFilename)
profile.replaceGCodeTags(gcodeFilename, self.gcode)
wx.CallAfter(self.notifyWindow.OnSliceDone, self)
else:
self.run()
def OnRun(self):
self.progressLog = []
p = sliceRun.startSliceCommandProcess(self.sliceCommand)
line = p.stdout.readline()
while(len(line) > 0):
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.SetProgress, progress[0], int(progress[1]), maxValue)
else:
self.progressLog.append(line)
wx.CallAfter(self.statusText.SetLabel, line)
if self.abort:
p.terminate()
wx.CallAfter(self.statusText.SetLabel, "Aborted by user.")
return
line = p.stdout.readline()
line = p.stderr.readline()
while len(line) > 0:
line = line.rstrip()
self.progressLog.append(line)
line = p.stderr.readline()
self.returnCode = p.wait()
self.progressGauge2.SetValue(self.fileCount)
gcode = gcodeInterpreter.gcode()
gcode.load(self.resultFilename)
self.abort = True
sliceTime = time.time() - self.sliceStartTime
status = "Build: %s" % (self.resultFilename)
status += "\nSlicing took: %02d:%02d" % (sliceTime / 60, sliceTime % 60)
status += "\nFilament: %.2fm %.2fg" % (gcode.extrusionAmount / 1000, gcode.calculateWeight() * 1000)
status += "\nPrint time: %02d:%02d" % (int(gcode.totalMoveTimeMinute / 60), int(gcode.totalMoveTimeMinute % 60))
cost = gcode.calculateCost()
if cost is not None:
status += "\nCost: %s" % (cost)
profile.replaceGCodeTags(self.resultFilename, gcode)
wx.CallAfter(self.statusText.SetLabel, status)
wx.CallAfter(self.OnSliceDone)
def run(self):
p = sliceRun.startSliceCommandProcess(self.cmdList[self.fileIdx])
line = p.stdout.readline()
self.progressLog = []
maxValue = 1
starttime = time.time()
while len(line) > 0:
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.notifyWindow.SetProgress, progress[0], int(progress[1]), maxValue)
else:
self.progressLog.append("%0.2f: %s" % (time.time() - starttime, line))
wx.CallAfter(self.notifyWindow.statusText.SetLabel, line)
if self.notifyWindow.abort:
p.terminate()
wx.CallAfter(self.notifyWindow.mainWindow.removeSliceProgress, self.notifyWindow)
return
line = p.stdout.readline()
line = p.stderr.readline()
while len(line) > 0:
line = line.rstrip()
self.progressLog.append(line)
line = p.stderr.readline()
self.returnCode = p.wait()
self.fileIdx += 1
if self.fileIdx == len(self.cmdList):
gcodeFilename = sliceRun.getExportFilename(self.filelist[0])
gcodefile = open(gcodeFilename, "a")
for logLine in self.progressLog:
if logLine.startswith('Model error('):
gcodefile.write(';%s\n' % (logLine))
gcodefile.close()
self.gcode = gcodeInterpreter.gcode()
self.gcode.load(gcodeFilename)
profile.replaceGCodeTags(gcodeFilename, self.gcode)
wx.CallAfter(self.notifyWindow.OnSliceDone, self)
else:
self.run()
def doFileLoadThread(self):
for obj in self.objectList:
if obj.filename != None and os.path.isfile(obj.filename) and obj.fileTime != os.stat(obj.filename).st_mtime:
obj.fileTime = os.stat(obj.filename).st_mtime
mesh = meshLoader.loadMesh(obj.filename)
obj.dirty = False
obj.mesh = mesh
self.updateModelTransform()
self.OnScaleMax(None, True)
scale = profile.getProfileSettingFloat('model_scale')
size = (self.objectsMaxV - self.objectsMinV) * scale
self.toolbarInfo.SetValue('%0.1f %0.1f %0.1f' % (size[0], size[1], size[2]))
self.glCanvas.zoom = numpy.max(size) * 2.5
self.errorList = []
wx.CallAfter(self.updateToolbar)
wx.CallAfter(self.glCanvas.Refresh)
if os.path.isfile(self.gcodeFilename) and self.gcodeFileTime != os.stat(self.gcodeFilename).st_mtime:
self.gcodeFileTime = os.stat(self.gcodeFilename).st_mtime
gcode = gcodeInterpreter.gcode()
gcode.progressCallback = self.loadProgress
gcode.load(self.gcodeFilename)
self.gcodeDirty = False
self.gcode = gcode
self.gcodeDirty = True
errorList = []
for line in open(self.gcodeFilename, "rt"):
res = re.search(';Model error\(([a-z ]*)\): \(([0-9\.\-e]*), ([0-9\.\-e]*), ([0-9\.\-e]*)\) \(([0-9\.\-e]*), ([0-9\.\-e]*), ([0-9\.\-e]*)\)', line)
if res != None:
v1 = util3d.Vector3(float(res.group(2)), float(res.group(3)), float(res.group(4)))
v2 = util3d.Vector3(float(res.group(5)), float(res.group(6)), float(res.group(7)))
errorList.append([v1, v2])
self.errorList = errorList
wx.CallAfter(self.updateToolbar)
wx.CallAfter(self.glCanvas.Refresh)
elif not os.path.isfile(self.gcodeFilename):
self.gcode = None
wx.CallAfter(self.checkReloadFileTimer.Start, 1000)
def OnRun(self, index):
while self.cmdIndex < len(self.sliceCmdList):
cmdIndex = self.cmdIndex;
self.cmdIndex += 1
action = self.sliceCmdList[cmdIndex]
wx.CallAfter(self.SetTitle, "Building: [%d/%d]" % (self.sliceCmdList.index(action) + 1, len(self.sliceCmdList)))
p = sliceRun.startSliceCommandProcess(action)
line = p.stdout.readline()
maxValue = 1
while(len(line) > 0):
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.SetProgress, index, progress[0], int(progress[1]), maxValue)
else:
wx.CallAfter(self.statusText[index].SetLabel, line)
if self.abort:
p.terminate()
wx.CallAfter(self.statusText[index].SetLabel, "Aborted by user.")
return
line = p.stdout.readline()
self.returnCode = p.wait()
# Update output gocde file...
# Warning: the user could have changed the profile between the slcer run and this code. We might be using old information.
gcodeFilename = self.outputFilenameList[index]
gcode = gcodeInterpreter.gcode()
gcode.load(gcodeFilename)
profile.replaceGCodeTags(gcodeFilename, gcode)
wx.CallAfter(self.progressGauge[index].SetValue, 10000)
self.totalDoneFactor[index] = 0.0
wx.CallAfter(self.progressTextTotal.SetLabel, "Done %d/%d" % (self.cmdIndex, len(self.sliceCmdList)))
wx.CallAfter(self.progressGaugeTotal.SetValue, self.cmdIndex)
def showLoadModel(self, button = 1):
if button == 1:
dlg=wx.FileDialog(self, 'Open 3D model', os.path.split(profile.getPreference('lastFile'))[0], style=wx.FD_OPEN|wx.FD_FILE_MUST_EXIST|wx.FD_MULTIPLE)
dlg.SetWildcard(meshLoader.loadWildcardFilter() + "|GCode file (*.gcode)|*.g;*.gcode;*.G;*.GCODE")
if dlg.ShowModal() != wx.ID_OK:
dlg.Destroy()
return
filenames = dlg.GetPaths()
dlg.Destroy()
if len(filenames) < 1:
return False
profile.putPreference('lastFile', filenames[0])
gcodeFilename = None
for filename in filenames:
self.GetParent().GetParent().GetParent().addToModelMRU(filename)
ext = filename[filename.rfind('.')+1:].upper()
if ext == 'G' or ext == 'GCODE':
gcodeFilename = filename
if gcodeFilename is not None:
if self._gcode is not None:
self._gcode = None
for layerVBOlist in self._gcodeVBOs:
for vbo in layerVBOlist:
self.glReleaseList.append(vbo)
self._gcodeVBOs = []
self._gcode = gcodeInterpreter.gcode()
self._gcodeFilename = gcodeFilename
self.printButton.setBottomText('')
self.viewSelection.setValue(4)
self.printButton.setDisabled(False)
self.OnViewChange()
else:
if self.viewSelection.getValue() == 4:
self.viewSelection.setValue(0)
self.OnViewChange()
self.loadScene(filenames)
def OnRun(self):
resultFile = open(self.resultFilename, "w")
put = profile.setTempOverride
self.progressLog = []
for action in self.actionList:
wx.CallAfter(self.SetTitle, "Building: [%d/%d]" % (self.actionList.index(action) + 1, len(self.actionList)))
if not action.usePreviousSlice:
p = sliceRun.startSliceCommandProcess(action.sliceCmd)
line = p.stdout.readline()
maxValue = 1
while(len(line) > 0):
line = line.rstrip()
if line[0:9] == "Progress[" and line[-1:] == "]":
progress = line[9:-1].split(":")
if len(progress) > 2:
maxValue = int(progress[2])
wx.CallAfter(self.SetProgress, progress[0], int(progress[1]), maxValue)
else:
self.progressLog.append(line)
wx.CallAfter(self.statusText.SetLabel, line)
if self.abort:
p.terminate()
wx.CallAfter(self.statusText.SetLabel, "Aborted by user.")
resultFile.close()
return
line = p.stdout.readline()
self.returnCode = p.wait()
put('object_center_x', action.centerX - self.extruderOffset[action.extruder][0])
put('object_center_y', action.centerY - self.extruderOffset[action.extruder][1])
put('clear_z', action.clearZ)
put('extruder', action.extruder)
put('print_temperature', action.temperature)
if action == self.actionList[0]:
resultFile.write(';TYPE:CUSTOM\n')
resultFile.write('T%d\n' % (action.extruder))
currentExtruder = action.extruder
prevTemp = action.temperature
startGCode = profile.getAlterationFileContents('start.gcode')
startGCode = startGCode.replace('?filename?', 'Multiple files')
resultFile.write(startGCode)
else:
#reset the extrusion length, and move to the next object center.
resultFile.write(';TYPE:CUSTOM\n')
if prevTemp != action.temperature and action.temperature > 0:
resultFile.write('M104 S%d\n' % (int(action.temperature)))
prevTemp = action.temperature
resultFile.write(profile.getAlterationFileContents('nextobject.gcode'))
resultFile.write(';PRINTNR:%d\n' % self.actionList.index(action))
profile.resetTempOverride()
if not action.usePreviousSlice:
f = open(sliceRun.getExportFilename(action.filename, "project_tmp"), "r")
data = f.read(4096)
while data != '':
resultFile.write(data)
data = f.read(4096)
f.close()
savedCenterX = action.centerX
savedCenterY = action.centerY
else:
f = open(sliceRun.getExportFilename(action.filename, "project_tmp"), "r")
for line in f:
if line[0] != ';':
if 'X' in line:
line = self._adjustNumberInLine(line, 'X', action.centerX - savedCenterX)
if 'Y' in line:
line = self._adjustNumberInLine(line, 'Y', action.centerY - savedCenterY)
resultFile.write(line)
f.close()
if not action.leaveResultForNextSlice:
os.remove(sliceRun.getExportFilename(action.filename, "project_tmp"))
wx.CallAfter(self.progressGauge.SetValue, 10000)
self.totalDoneFactor = 0.0
wx.CallAfter(self.progressGauge2.SetValue, self.actionList.index(action) + 1)
resultFile.write(';TYPE:CUSTOM\n')
if len(self.actionList) > 1 and self.actionList[-1].clearZ > 1:
#only move to higher Z if we have sliced more then 1 object. This solves the "move into print after printing" problem with the print-all-at-once option.
resultFile.write('G1 Z%f F%f\n' % (self.actionList[-1].clearZ, profile.getProfileSettingFloat('max_z_speed') * 60))
resultFile.write(profile.getAlterationFileContents('end.gcode'))
resultFile.close()
gcode = gcodeInterpreter.gcode()
gcode.load(self.resultFilename)
self.abort = True
sliceTime = time.time() - self.sliceStartTime
status = "Build: %s" % (self.resultFilename)
status += "\nSlicing took: %02d:%02d" % (sliceTime / 60, sliceTime % 60)
status += "\nFilament: %.2fm %.2fg" % (gcode.extrusionAmount / 1000, gcode.calculateWeight() * 1000)
status += "\nPrint time: %02d:%02d" % (int(gcode.totalMoveTimeMinute / 60), int(gcode.totalMoveTimeMinute % 60))
cost = gcode.calculateCost()
self.totalMoveTimeMinute = gcode.totalMoveTimeMinute
if cost != False:
status += "\nCost: %s" % (cost)
profile.replaceGCodeTags(self.resultFilename, gcode)
wx.CallAfter(self.statusText.SetLabel, status)
wx.CallAfter(self.OnSliceDone)