def run(par):
scenario, cfg_dict, sc_dict = par
cfg = Configuration(log_to_file=True, **cfg_dict)
sc = import_object('scenarios', scenario)(cfg.rnd, cfg.seed, **sc_dict)
cfg.scenario = sc
cli.run(cfg)
def read_trj(trj_file):
"""
return: Simulation
parameters:
trj_file: string | name of trj file
"""
simulation = Simulation()
with open(trj_file, 'r') as trj:
while True:
line = trj.readline()
if not line:
break
lattice = Lattice()
lattice.set_a(np.array(line.split(), dtype=float))
lattice.set_b(np.array(trj.readline().split(), dtype=float))
lattice.set_c(np.array(trj.readline().split(), dtype=float))
configuration = Configuration(lattice=lattice)
atom_types = trj.readline().split()
atom_counts = np.array(trj.readline().split(), dtype=int)
natom = np.sum(atom_counts)
for i in xrange(natom):
atom_record = trj.readline().split()
atom_name = atom_record[0]
atom_position = np.array(atom_record[1:], dtype=float)
configuration.insert_atom(Atom(atom_name, atom_position))
simulation.insert_configuration(configuration)
return simulation
def _generateArtifactList(options):
# load configuration
logging.info("Loading configuration...")
config = Configuration()
config.load(options)
# build list
logging.info("Building artifact list...")
listBuilder = ArtifactListBuilder(config)
artifactList = listBuilder.buildList()
logging.debug("Generated list contents:")
for gat in artifactList:
priorityList = artifactList[gat]
for priority in priorityList:
versionList = priorityList[priority]
for version in versionList:
logging.debug(" %s:%s", gat, version)
#filter list
logging.info("Filtering artifact list...")
listFilter = Filter(config)
artifactList = listFilter.filter(artifactList)
logging.debug("Filtered list contents:")
for gat in artifactList:
priorityList = artifactList[gat]
for priority in priorityList:
versionList = priorityList[priority]
for version in versionList:
logging.debug(" %s:%s", gat, version)
logging.info("Artifact list generation done")
return artifactList
def url_handler(ref):
uri = None
prefix = None
conf = Configuration()
datasetBase = conf.get_value("datasetBase")
webBase = conf.get_value("webBase")
webResourcePrefix = conf.get_value("webResourcePrefix")
if (len(webResourcePrefix) == 0):
splitted = ref.split("/")
prefix = splitted[0]
if (prefix in get_supported_prefixes()):
uri = "%s%s" % (datasetBase, ref[len(prefix)+1:])
return uri, prefix
else:
prefix = None
uri = datasetBase + ref
return uri, prefix
else:
if (ref.startswith(webResourcePrefix)):
prefix = None
uri = datasetBase + ref
return uri, prefix
else:
splitted = ref.split("/")
prefix = splitted[0]
if (prefix in get_supported_prefixes()):
uri = datasetBase + ref.replace(prefix+"/", conf.get_value("webResourcePrefix"))
return uri, prefix
else:
raise ValueError("Unsupportet type '%s'" % splitted[0])
class Kobol(object):
def __init__(self, directory = None):
self.home = os.path.normpath(directory or os.getcwd()) + os.sep
self.config = Configuration()
self.config['home'] = self.home
self.site = Site()
self.site.config(self.config)
def scaffold(self, **kwargs):
if os.path.isfile(self.home + '/.kobol'):
return False
elif kwargs.get('dry') != True:
skel = os.path.dirname(os.path.abspath(__file__)) + '/skel/'
os.system("cp -R %s* %s.kobol %s" % (skel, skel, self.home))
return True
def load_config_files(self, files):
self.config.load(files)
self.site.config(self.config)
def main(self):
self.scaffold()
def closeEvent(self, event):
if not self.trayIcon.isVisible() and Configuration.icon:
self.trayIcon.show()
self.hide()
event.ignore()
else:
termine = True
# On vérifie que tous les téléchargements soient finis
for download in self.downloads.instance.downloads:
if download.state == 3:
termine = False
# Si il y a un download en cours on affiche la fenêtre
if not termine and not Configuration.close_window:
# Un petit messageBox avec bouton clickable :)
msgBox = QMessageBox(QMessageBox.Question, u"Voulez-vous vraiment quitter?", u"Un ou plusieurs téléchargements sont en cours, et pyRex ne gère pas encore la reprise des téléchargements. Si vous quittez maintenant, toute progression sera perdue!")
checkBox = QCheckBox(u"Ne plus afficher ce message", msgBox)
checkBox.blockSignals(True)
msgBox.addButton(checkBox, QMessageBox.ActionRole)
msgBox.addButton("Annuler", QMessageBox.NoRole)
yesButton = msgBox.addButton("Valider", QMessageBox.YesRole)
msgBox.exec_()
if msgBox.clickedButton() == yesButton:
# On save l'état du bouton à cliquer
if checkBox.checkState() == Qt.Checked:
Configuration.close_window = True
Configuration.write_config()
event.accept()
else:
event.ignore()
else:
event.accept()
def TCPClient():
MYIP = Configuration.getPublicIP()
ID = Configuration.getMyID()
print threading.currentThread().getName(), 'TCP Client Starting. I am Node#', ID
while True:
user_input = raw_input("format: send <Dest Node ID> <Message>")
cmd = user_input.split(" ")
for ip in Configuration.IPTABLE:
if ip == MYIP: continue #Ignore itself
TCP_IP = ip
TCP_PORT = Configuration.TCPPORT
BUFFER_SIZE = 1024
MESSAGE = "Hello, World! from Node#%d" % ID
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
flag = True
while flag:
try:
s.connect((TCP_IP, TCP_PORT))
s.send(MESSAGE)
printdata("TCP Send", ID, ID, Configuration.getID(TCP_IP), MESSAGE)
data = s.recv(BUFFER_SIZE)
s.close()
flag = False
except:
printdata("TCP Client Reconnect", ID, ID, Configuration.getID(TCP_IP), "@_@")
time.sleep(1) #Reconnect delay
time.sleep(5)
print threading.currentThread().getName(), 'TCP Client Exiting. I am Node #', ID
return
def TCPSend(dest, content):
TCP_IP = Configuration.getIP(dest)
MYIP = Configuration.getPublicIP()
if TCP_IP == MYIP:
print "TCPSend() terminates. (Error: sending to itself)" #Ignore itself
return
TCP_PORT = Configuration.TCPPORT
ID = Configuration.getMyID()
print threading.currentThread().getName(), 'TCP Client Starting. I am Node#', ID
BUFFER_SIZE = 1024
MESSAGE = "Hello, World! from Node#%d" % ID
s = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
flag = True
while flag:
try:
s.connect((TCP_IP, TCP_PORT))
s.send(content)
printdata("TCP Send", ID, ID, Configuration.getID(TCP_IP), content)
data = s.recv(BUFFER_SIZE)
s.close()
flag = False
except:
printdata("TCP Client Reconnect", ID, ID, Configuration.getID(TCP_IP), "@_@")
time.sleep(1) #Reconnect delay
time.sleep(5)
print threading.currentThread().getName(), 'TCP Client Exiting Successfully. I am Node #', ID
return
def test_filter_excludedTypes(self):
config = Configuration()
alf = Filter(config)
config.excludedTypes = ["zip", "war"]
al = copy.deepcopy(self.artifactList)
al["foo:bar"] = {
"1": {
"1.0.0": ArtifactSpec("http://repo1.maven.org/maven2/",
[ArtifactType("zip", True, set([''])), ArtifactType("pom", False, set(['']))])
}
}
alf._filterExcludedTypes(al)
self.assertFalse('foo:bar' in al)
al["foo:bar"] = {
"1": {
"1.0.0": ArtifactSpec("http://repo1.maven.org/maven2/",
[ArtifactType("zip", True, set([''])), ArtifactType("pom", False, set(['']))])
}
}
config.gatcvWhitelist = ["*:zip:scm-sources:*"]
alf._filterExcludedTypes(al)
self.assertFalse('foo:bar' in al)
al["foo:bar"] = {
"1": {
"1.0.0": ArtifactSpec("http://repo1.maven.org/maven2/",
[ArtifactType("zip", True, set(['scm-sources'])),
ArtifactType("pom", False, set(['']))])
}
}
alf._filterExcludedTypes(al)
self.assertTrue('foo:bar' in al)
def test_filter_excluded_GAVs(self):
config = Configuration()
alf = Filter(config)
config.excludedGAVs = ["com.google.guava:guava:1.1.0"]
al = copy.deepcopy(self.artifactList)
self.assertTrue('1.1.0' in al['com.google.guava:guava:pom']['1'])
alf._filterExcludedGAVs(al)
self.assertFalse('1.1.0' in al['com.google.guava:guava:pom']['1'])
config.excludedGAVs = ["com.google.guava:guava:1.0*"]
al = copy.deepcopy(self.artifactList)
self.assertTrue('1.0.0' in al['com.google.guava:guava:pom']['1'])
self.assertTrue('1.0.1' in al['com.google.guava:guava:pom']['1'])
self.assertTrue('1.0.2' in al['com.google.guava:guava:pom']['2'])
self.assertTrue('1.0.0' in al['com.google.guava:guava:pom']['3'])
alf._filterExcludedGAVs(al)
self.assertFalse('1.0.0' in al['com.google.guava:guava:pom']['1'])
self.assertFalse('1.0.1' in al['com.google.guava:guava:pom']['1'])
self.assertFalse('2' in al['com.google.guava:guava:pom'])
self.assertFalse('1.0.0' in al['com.google.guava:guava:pom']['3'])
config.excludedGAVs = ["com.google.guava:*"]
al = copy.deepcopy(self.artifactList)
self.assertTrue('com.google.guava:guava:pom' in al)
alf._filterExcludedGAVs(al)
self.assertFalse('com.google.guava:guava:pom' in al)
def show_form(self):
'''
Displays this form, blocking until the user closes it. When it is closed,
this method will return a Configuration object containing the settings
that this dialog was displaying when it was closed (these settings were
also just saved on the filesystem, so they are also the settings that
this dialog will display the next time it is opened.)
If the user clicks 'Cancel' then this method will simply return null.
'''
log.debug("opened the settings dialog.")
defaults = Configuration()
defaults.load_defaults()
self.__set_configuration(defaults)
self.__switch_to_best_tab()
dialogAnswer = self.ShowDialog() # blocks
if dialogAnswer == DialogResult.OK:
config = self.__get_configuration()
config.save_defaults()
log.debug("closed the settings dialog.")
else:
config = None
log.debug("cancelled the settings dialog.")
return config
def acceptor_udp_server():
ID = Configuration.getMyID()
#UDP_PORT = Configuration.ACCEPTOR_PORT
UDP_PORT = Configuration.PORTS["prepare"]
print threading.currentThread().getName(), ' Acceptor UDP Server Starting. I am Node#', ID, "at port", UDP_PORT
sock = socket.socket(socket.AF_INET, # Internet
socket.SOCK_DGRAM) # UDP
sock.bind(('', UDP_PORT))
while True:
data, addr = sock.recvfrom(1024) # buffer size is 1024 bytes
peerID = Configuration.getID( addr[0] )
#try
json_object = transferInput(data)
if json_object['msgname'] == "commit":
onCommit(json_object['entryID'], json_object['msglist'], peerID)
printdata("Acceptor Recv Commit", ID, peerID, ID, data)
elif json_object['msgname'] == "accept":
onAccept(json_object['entryID'], json_object['msglist'], peerID)
printdata("Acceptor Recv Accept", ID, peerID, ID, data)
elif json_object['msgname'] == "prepare":
onPrepare(json_object['entryID'], json_object['msglist'], peerID)
printdata("Acceptor Recv Prepare", ID, peerID, ID, data)
#except:
# print "Can't parse data:", data, sys.exc_info()[0]
print threading.currentThread().getName(), ' Acceptor UDP Server Exiting. I am Node#', ID
return
def clear():
"""
Clear the screen,
only if the configuration says it's OK.
"""
if Configuration.getClear() and Configuration.getInteractive():
sys.stdout.write(Configuration.clearcode)
def runMain():
# First, we import our devices from our configuration file. These will be split into two different groups, those
# controlled by Philips Hue and those controlled by Insteon.
configuration = Configuration()
config = configuration.loadConfig()
hueDevices = {}
insteonDevices = {}
for device in config['devices']['hue']:
hueDevices[device] = config['devices']['hue'][device]
for device in config['devices']['insteon']:
insteonDevices[device] = config['devices']['insteon'][device]
insteon = Insteon()
hue = Hue()
roomba = Roomba()
# Now we set up the voice recognition using Pocketsphinx from CMU Sphinx.
pocketSphinxListener = PocketSphinxListener()
# We want to run forever, or until the user presses control-c, whichever comes first.
while True:
try:
command = pocketSphinxListener.getCommand().lower()
command = command.replace('the', '')
if command.startswith('turn'):
onOrOff = command.split()[1]
deviceName = ''.join(command.split()[2:])
if deviceName in hueDevices:
deviceId = hueDevices[deviceName]['deviceID']
hue.turn(deviceId=deviceId, onOrOff=onOrOff)
if deviceName in insteonDevices:
deviceId = insteonDevices[deviceName]['deviceID']
insteon.turn(deviceId=deviceId, onOrOff=onOrOff)
if deviceName == 'roomba':
roomba.turn(onOrOff)
elif command.startswith('roomba'):
action = ' '.join(command.split()[1:])
if action == 'clean':
roomba.clean()
if action == 'go home':
roomba.goHome()
# This will allow us to be good cooperators and sleep for a second.
# This will give the other greenlets which we have created for talking
# to the Hue and Insteon hubs a chance to run.
gevent.sleep(1)
except (KeyboardInterrupt, SystemExit):
print 'People sometimes make mistakes, Goodbye.'
sys.exit()
except Exception as e:
exc_type, exc_value, exc_traceback = sys.exc_info()
traceback.print_exception(exc_type, exc_value, exc_traceback,
limit=2,
file=sys.stdout)
sys.exit()
def do_create(args):
"""Create a droplet based on configuration"""
config = Configuration()
if not config.read_config(args.config_file):
return False
create(config)
return True
def quote(uri):
uri = uri2str(uri)
#return urllib.quote(uri)
conf = Configuration()
fixUnescapedCharacters = conf.get_value("fixUnescapedCharacters")
for c in fixUnescapedCharacters:
uri = uri.replace(c, urllib.quote(c))
return uri
def do_destroy(args):
"""Destroy a droplet based on configuration"""
config = Configuration()
if not config.read_config(args.config_file):
return False
destroy(config)
return True
def setUp(self):
test_config = TestConfig()
self.data_path = test_config.get_data_path()
config = Configuration(os.path.join(self.data_path,'build.ini'))
db_name = config.get('mongodb1','db_name')
host = config.get('mongodb1','host')
config = MongoDBConfig(db_name, host)
self.db = MongoDB(config)
def wipeConfiguration(self):
conf = Configuration()
conf.wipe()
msgbox = QtGui.QMessageBox(self)
msgbox.setText(self.tr("The application will close. Please restart manually") )
msgbox.setModal( True )
ret = msgbox.exec_()
self.mustQuit()
def __init__(self, parent=None):
super(MainWindow, self).__init__(parent)
self.ui = uic.loadUi("mainwindow.ui",self)
self.setWindowTitle("python-whiteboard")
self.setWindowFlags( qt.Qt.CustomizeWindowHint | qt.Qt.WindowMinimizeButtonHint |
qt.Qt.WindowCloseButtonHint )
self.connected = False
self.calibrated = False
self.active = False
self.mustquit = False
self.wii = None
self.cursor = None
self.batteryLevel.reset()
self.batteryLevel.setRange(0,99)
self.batteryLevel.setValue(0)
conf = Configuration()
self.ui.pushButtonConnect.clicked.connect(self.connectWii)
self.ui.pushButtonCalibrate.clicked.connect(self.calibrateWiiScreen)
self.ui.pushButtonActivate.clicked.connect(self.activateWii)
self.ui.pushButtonLoadCal.clicked.connect(self.calibrateWiiFromSettings)
self.ui.pushButtonSettings.clicked.connect(self.showHideSettings)
self.ui.comboProfiles.currentIndexChanged.connect(self.changeProfile)
self.updateButtons()
self.ui.actionQuit.triggered.connect(self.mustQuit)
self.ui.actionHelp.triggered.connect(self.showAboutDlg)
self.ui.actionNew_Profile.triggered.connect(self.addProfile)
self.ui.actionDelete_Current_Profile.triggered.connect(self.delCurrentProfile)
self.ui.actionWipe_configuration.triggered.connect(self.wipeConfiguration)
self.ui.moveOnlyCheck.setChecked( conf.getValueStr('moveonly') == 'Yes' )
self.ui.moveOnlyCheck.stateChanged.connect(self.checkMoveOnly)
if conf.getValueStr("autoconnect") == "Yes":
self.timer = qt.QTimer(self)
self.timer.setInterval(500)
self.timer.timeout.connect(self.autoConnect)
self.timer.start()
self.timer2 = qt.QTimer(self)
self.timer2.setInterval(4000)
self.timer2.timeout.connect(self.checkWii)
self.timer2.start()
self.confDialog = ConfigDialog(self, self.wii)
layout = QtWidgets.QGridLayout()
layout.addWidget(self.confDialog)
self.ui.confContainer.setLayout(layout)
self.ui.confContainer.setVisible(False)
self.refreshProfiles()
self.center()
def SetGSize(self, widget, x=None, y=None): self.VBox.remove(self.grid.Widget()) c = Configuration() c.GridXX = x c.GridYY = y self.grid = PipesGrid.PipesGrid(c.GridXX, c.GridYY) self.grid.Widget().show_all() self.VBox.add (self.grid.Widget()) self.window.resize(1,1)
def main():
"""
As per Main method, defines sequence of program.
"""
try:
format = ['%(asctime)s %(message)s', '%Y-%m-%d %H:%M:%S']
resultfiles = []
pas = 0
total = 0
create_logger(format)
opts, args = getopt.getopt(sys.argv[1:], "hc:", ["help", "config="])
source = str()
if not opts:
usage()
for opt, arg in opts:
if opt in ("-h", "--help"):
usage()
elif opt in ("-c", "--config"):
source = arg
# Configurations init
Configuration.load(source, format)
logging.info("="*100)
logging.info("Regression started")
logging.info("="*100)
start_time = time.clock()
# Execute Scripts
resultfiles = execute()
logging.info("="*100)
logging.info("Results")
logging.info("="*100)
# Dispatch results
pas, total = dispatch(resultfiles)
total_time = time.clock() - start_time
logging.info("="*100)
logging.info("%d passed out of %d" %(pas, total))
logging.info("Total elapsed time(secs) %.2f" %(total_time))
logging.info("="*100)
except (getopt.GetoptError, Exception) as e:
logging.info("Exception %s" %str(e))
except:
logging.info("Fatal error occured.")
def __init__(self, config: Configuration):
super().__init__('RedisCassandra')
redis_host = config.get('redis.host')
redis_port = config.get('redis.port')
redis_pass = config.get('redis.password')
#TODO: change to Sentinel so we can handle multiple hosts
self.redis_conn = StrictRedis(host=redis_host, port=redis_port, password=redis_pass)
self.cache = get_cache()
def wait():
"""
Prompt and wait for user to press enter,
only if the configuration says it's OK.
"""
if Configuration.getClear() and Configuration.getInteractive():
print
print "press enter",
raw_input()
def saveCalibrationPars(self,wii):
conf = Configuration()
for i,p in enumerate(wii.screenPoints):
conf.saveValue("screenPoint"+str(i)+"x",str(p[0]))
conf.saveValue("screenPoint"+str(i)+"y",str(p[1]))
for i,p in enumerate(wii.calibrationPoints):
conf.saveValue("wiiPoint"+str(i)+"x",str(p[0]))
conf.saveValue("wiiPoint"+str(i)+"y",str(p[1]))
def refreshProfiles(self):
conf = Configuration()
self.ui.comboProfiles.clear()
self.ui.comboProfiles.addItem(self.tr("default"))
for p in conf.getProfileList():
self.ui.comboProfiles.addItem(p)
self.confDialog.refreshWidgets()
self.ui.moveOnlyCheck.setChecked( conf.getValueStr('moveonly') == 'Yes' )
def checkMoveOnly(self,i):
conf = Configuration()
if self.sender().isChecked():
conf.saveValue('moveonly','Yes')
if self.cursor:
self.cursor.noClicks = True
else:
conf.saveValue('moveonly','No')
if self.cursor:
self.cursor.noClicks = False
def delCurrentProfile(self): i = self.ui.comboProfiles.currentIndex() currentProfile = unicode(self.ui.comboProfiles.currentText()) if i == 0: return conf = Configuration() profiles = conf.getProfileList() profiles = [ p for p in profiles if p != currentProfile ] conf.setProfileList(profiles) self.refreshProfiles() self.ui.comboProfiles.setCurrentIndex(0)
def get_document_url(uri, prefix, conf=None):
if (conf == None):
conf = Configuration()
webResourcePrefix = conf.get_value("webResourcePrefix")
datasetBase = conf.get_value("datasetBase")
webBase = conf.get_value("webBase")
if (len(webResourcePrefix) == 0):
return "%s%s/%s" % (webBase, prefix, uri[len(datasetBase):])
else:
return uri.replace(datasetBase, webBase).replace(webResourcePrefix, "%s/" % prefix)
def cr(ctx):
try:
if (not Configuration.exists()):
Utils.print_encoded("Please inform your TFS' information\n")
ctx.invoke(configure, url=click.prompt("Url"), username=click.prompt("Username"), password=click.prompt("Password"))
ctx.exit()
repo = git.Repo('.')
ctx.obj = Repository(repo, RepositoryUtils(repo), Tfs(Configuration.load()))
except git.exc.InvalidGitRepositoryError:
Error.abort("You're not on a valid git repository")
def __init__(self):
configuration = Configuration()
self.token_bot = configuration.config['TELEGRAM']['BOT_TOKEN']
self.chat_id = configuration.config['TELEGRAM']['CHAT_ID']
self.bot = telegram.Bot(self.token_bot)
return global_step
if __name__ == "__main__":
file_name = ["data/test_batch.bin"]
exp_name = sys.argv[1]
a_function = tf.nn.relu if sys.argv[2] == "relu" else tf.sigmoid
pipeline = ip.DataPipeline(file_name)
test_x, test_y = pipeline.get_batch_op()
config = Configuration(input_size=3072,
output_size=10,
examples_per_epoches=50000,
batch_size=100,
a_function=a_function)
dropout = tf.placeholder(tf.float32)
convo_model = m.ConvoModel(config)
convo_model.initialize(test_x, dropout)
predictions = convo_model.infer()
top_k = tf.nn.in_top_k(predictions, test_y, 1)
summary_op = tf.merge_all_summaries()
summary_writer = tf.train.SummaryWriter("experiments/%s" % exp_name)
return [input_ids, attention_mask], np.array(y_batch, dtype=np.int32)
def on_epoch_end(self):
"""Updates indexes after each epoch"""
if self.shuffle:
np.random.shuffle(self.indices)
if __name__ == '__main__':
import argparse, sys
parser = argparse.ArgumentParser()
# 首先是mandatory parameters
parser.add_argument('--only_create_new_generator',
action='store_true',
help='create_new_generator')
parser.add_argument('--not_save_new_generator',
action='store_true',
help='not_save_new_generator')
parser.add_argument('--t',
action='store_true',
help='use torch as backend')
args = parser.parse_args()
not_save_new_generator = args.not_save_new_generator
only_create_new_generator = args.only_create_new_generator
use_torch = args.t
Configuration.configure()
LMTC().train(only_create_new_generator, not_save_new_generator, use_torch)
def validate(self):
"""validate and finalize configuration"""
self.config['remote'] = self.remote
if self.remote:
# setup remote
deviceip = self.config.get('deviceip')
deviceport = self.config['deviceport']
if deviceip or deviceport == -1:
self._setupRemote(deviceip, deviceport)
# fix webserver for --develop mode
if self.config.get('develop'):
webserver = self.config.get('webserver')
if (not webserver) or (webserver == 'localhost'):
self.config['webserver'] = utils.getLanIp()
# webServer can be used without remoteDevice, but is required when using remoteDevice
if self.config.get('deviceip') or self.config.get('deviceroot'):
if self.config.get(
'webserver', 'localhost'
) == 'localhost' or not self.config.get('deviceip'):
raise ConfigurationError(
"When running Talos on a remote device, you need to provide a webServer and optionally a remotePort"
)
fennecIDs = self.config.get('fennecIDs')
if fennecIDs and not os.path.exists(fennecIDs):
raise ConfigurationError(
"Unable to find fennce IDs file, please ensure this file exists: %s"
% fennecIDs)
# robocop based tests (which use fennecIDs) do not use or need the pageloader extension
if fennecIDs:
self.config['extensions'] = []
# generic configuration validation
Configuration.validate(self)
# ensure the browser_path is specified
msg = "Please specify --executablePath"
if not 'print_tests' in self.parsed and not self.config.get(
'browser_path'):
self.error(msg)
# add test_name_extension to config
# http://hg.mozilla.org/build/talos/file/c702ff8892be/talos/PerfConfigurator.py#l107
noChrome = self.config.get('noChrome')
mozAfterPaint = self.config.get('tpmozafterpaint')
if noChrome or mozAfterPaint and not self.config.get(
'test_name_extension'):
# (it would be nice to handle this more elegantly)
test_name_extension = ''
if noChrome:
test_name_extension += '_nochrome'
if mozAfterPaint:
test_name_extension += '_paint'
self.config['test_name_extension'] = test_name_extension
# BBB: (resultsServer, resultsLink) -> results_url
resultsServer = self.config.pop('resultsServer', None)
resultsLink = self.config.pop('resultsLink', None)
if resultsServer and resultsLink:
if self.config.get('results_urls'):
raise Configuration(
"Can't user resultsServer/resultsLink and results_url: use results_url instead"
)
self.config['results_urls'] = [
'http://%s%s' % (resultsServer, resultsLink)
]
# BBB: remove doubly-quoted xperf values from command line
# (needed for buildbot)
# https://bugzilla.mozilla.org/show_bug.cgi?id=704654#c43
xperf_path = self.config.get('xperf_path', '')
if 'xperf_path' in self.parsed and len(xperf_path) > 2:
quotes = ('"', "'")
for quote in quotes:
if xperf_path.startswith(quote) and xperf_path.endswith(quote):
self.config['xperf_path'] = xperf_path[1:-1]
break
# fix options for --develop
if self.config.get('develop'):
if not self.config.get('webserver'):
self.config['webserver'] = 'localhost:%s' % utils.findOpenPort(
'127.0.0.1')
# set preferences
if self.config.get('tpmozafterpaint'):
self.config['preferences'][
'dom.send_after_paint_to_content'] = True
extraPrefs = self.config.pop('extraPrefs', {})
extraPrefs = dict([(i, utils.parsePref(j))
for i, j in extraPrefs.items()])
self.config['preferences'].update(extraPrefs)
# remove None values from preferences;
# allows overrides
self.config['preferences'] = dict([
(key, value) for key, value in self.config['preferences'].items()
if value is not None
])
# fix talos.logfile preference to be an absolute path
# http://hg.mozilla.org/build/talos/file/e1022c38a8ed/talos/PerfConfigurator.py#l129
if 'talos.logfile' in self.config['preferences']:
# if set to empty string, use the "global" browser_log
# in practice these should always be in sync
log_file = self.config['preferences']['talos.logfile'].strip(
) or self.config['browser_log']
log_file = os.path.abspath(log_file)
self.config['preferences']['talos.logfile'] = log_file
if 'init_url' in self.config:
# fix init_url
self.config['init_url'] = self.convertUrlToRemote(
self.config['init_url'])
# get filters
ignore_first = self.config.pop('ignore_first')
if ignore_first:
# BBB handle legacy ignore_first case
# convert --ignoreFirst to the appropriate set of filters
if self.config.get('filters'):
raise ConfigurationError(
"Can't use --ignoreFirst and --filter; use --filter instead"
)
self.config['filters'] = ['ignore_first', 'median']
# convert options.filters to [[filter, [args]]]
filters = []
_filters = self.config.get('filters', self.filters[:])
for position, filter_name in enumerate(_filters):
if isinstance(filter_name, basestring):
try:
f = filter.parse(filter_name)
# Check if last filter is scalar filter
# and if all the rest are series filters
if position == len(_filters) - 1:
assert f[0] in filter.scalar_filters,\
"Last filter has to be a scalar filter."
else:
assert f[0] in filter.series_filters,\
"Any filter except the last has to be a series filter."
except Exception, e:
raise ConfigurationError("Bad value for filter '%s': %s" %
(filter_name, e))
else:
f = filter_name
filters.append(f)
if __name__ == "__main__":
# event loop
loop = asyncio.get_event_loop()
# signal
signal.signal(signal.SIGINT, clash_handler)
# working directory
working_path = os.path.abspath(sys.argv[1])
print("working directory: {0}".format(working_path))
# make data directory
_data_directory = "{0}/data".format(working_path)
if os.path.exists(_data_directory):
shutil.rmtree(_data_directory)
print("remove old data folder")
os.mkdir(_data_directory)
print("make data folder")
# load configuration
config = Configuration("", [])
_config_path = "{0}/config.yml".format(working_path)
_config_loader = ConfigLoader(path=_config_path, config=config)
print("Listener:\n{0}\nSpeaker:\n{1}".format(config.listener_token,
config.speaker_token_list))
# lunch bot
bot_manager = BotManager(config=config,
loop=loop,
working_path=_data_directory)
# run loop
loop.run_forever()
#!/usr/bin/env python3
# -*- coding: utf-8 -*-
"""
Created on Tue Oct 29 14:55:37 2019
@author: simona
"""
from mpi4py import MPI
comm_world = MPI.COMM_WORLD
rank_world = comm_world.Get_rank()
from configuration import Configuration
C = Configuration()
solver_init = C.full_solver_init
solver_parameters = C.full_solver_parameters
no_solvers = C.no_full_solvers
no_samplers = C.no_samplers
# solver_init ... initializes the object of the (full, surrogate) solver
# solver_parameters ... list of dictionaries with initialization parameters
# no_solvers ... number of solvers to be created
# no_samplers ... number of samplers that request solutions
import numpy as np
from collections import deque
Solvers = []
for i in range(no_solvers):
Solvers.append(solver_init(**solver_parameters[i]))
samplers_rank = np.arange(no_samplers)
is_active_sampler = np.array([True] * len(samplers_rank))
# Images can either be extracted from a video file or a batch of single photographs. Select
# the example for the test run.
type = 'video'
if type == 'image':
names = glob.glob('Images/2012*.tif')
# names = glob.glob('Images/Moon_Tile-031*ap85_8b.tif')
# names = glob.glob('Images/Example-3*.jpg')
else:
# file = 'short_video'
file = 'Moon_Tile-024_043939'
names = 'Videos/' + file + '.avi'
print(names)
start_over_all = time()
# Get configuration parameters.
configuration = Configuration()
try:
frames = Frames(names, type=type)
print("Number of images read: " + str(frames.number))
print("Image shape: " + str(frames.shape))
except Exception as e:
print("Error: " + e.message)
exit()
# Rank the frames by their overall local contrast.
rank_frames = RankFrames(frames, configuration)
start = time()
rank_frames.frame_score()
end = time()
print('Elapsed time in ranking images: {}'.format(end - start))
print("Index of maximum: " + str(rank_frames.frame_ranks_max_index))
def __init__(self, parent=None):
"""
Initialize the Planetary System LRGB Aligner environment.
:param parent: None
"""
# The (generated) QtGui class is contained in module main_gui.py.
QtWidgets.QWidget.__init__(self, parent)
self.ui = Ui_MainWindow()
self.ui.setupUi(self)
# Insert the photo viewer into the main GUI.
self.ImageWindow = PhotoViewer(self)
self.ImageWindow.setObjectName("ImageWindow")
self.ui.verticalLayout_3.insertWidget(1, self.ImageWindow, stretch=1)
# Connect main GUI events with method invocations.
self.ui.buttonLoadBW.clicked.connect(self.load_bw_image)
self.ui.buttonLoadColor.clicked.connect(self.load_color_image)
self.ui.buttonRegistration.clicked.connect(self.compute_registration)
self.ui.buttonComputeLRGB.clicked.connect(self.compute_lrgb)
self.ui.buttonSetConfigParams.clicked.connect(self.edit_configuration)
self.ui.buttonSaveRegisteredColorImage.clicked.connect(
self.save_registered_image)
self.ui.buttonSaveLRGB.clicked.connect(self.save_lrgb_image)
self.ui.buttonExit.clicked.connect(self.closeEvent)
self.ui.radioShowBW.clicked.connect(
lambda: self.show_pixmap(pixmap_index=0))
self.ui.radioShowColorOrig.clicked.connect(
lambda: self.show_pixmap(pixmap_index=1))
self.ui.radioShowColorRigidTransform.clicked.connect(
lambda: self.show_pixmap(pixmap_index=2))
self.ui.radioShowMatches.clicked.connect(
lambda: self.show_pixmap(pixmap_index=3))
self.ui.radioShowColorOptFlow.clicked.connect(
lambda: self.show_pixmap(pixmap_index=4))
self.ui.radioShowLRGB.clicked.connect(
lambda: self.show_pixmap(pixmap_index=5))
# Initialize the path to the home directory.
self.current_dir = str(Path.home())
# Initialize instance variables.
self.image_reference = None
self.image_reference_8bit_gray = None
self.image_target = None
self.image_target_8bit_gray = None
self.image_dewarped = None
self.image_lrgb = None
self.pixmaps = [None, None, None, None, None, None]
self.current_pixmap_index = None
# Initialize status variables
self.status_list = [
False, False, False, False, False, False, False, False
]
self.status_pointer = {
"initialized": 0,
"bw_loaded": 1,
"color_loaded": 2,
"rigid_transformed": 3,
"optical_flow_computed": 4,
"lrgb_computed": 5,
"results_saved": 6
}
self.radio_buttons = [
self.ui.radioShowBW, # 0
self.ui.radioShowColorOrig, # 1
self.ui.radioShowColorRigidTransform, # 2
self.ui.radioShowMatches, # 3
self.ui.radioShowColorOptFlow, # 4
self.ui.radioShowLRGB
] # 5
self.control_buttons = [
self.ui.buttonSetConfigParams, # 0
self.ui.buttonLoadBW, # 1
self.ui.buttonLoadColor, # 2
self.ui.buttonRegistration, # 3
self.ui.buttonSaveRegisteredColorImage, # 4
self.ui.buttonComputeLRGB, # 5
self.ui.buttonSaveLRGB, # 6
self.ui.buttonExit
] # 7
self.max_button = [0, 1, 2, 4, 5, 6, 6]
self.max_control_button = [2, 3, 4, 4, 6, 7, 8]
self.status_busy = False
# Create configuration object and set configuration parameters to standard values.
self.configuration = Configuration()
# Write the program version into the window title.
self.setWindowTitle(self.configuration.version)
# Start the workflow thread. It controls the computations and control of external devices.
# By decoupling those activities from the main thread, the GUI is kept from freezing during
# long-running activities.
self.workflow = Workflow(self)
sleep(self.configuration.wait_for_workflow_initialization)
# The workflow thread sends signals during computations. Connect those signals with the
# appropriate GUI activity.
self.workflow.set_status_busy_signal.connect(self.set_busy)
self.workflow.set_status_signal.connect(self.set_status)
self.workflow.set_error_signal.connect(self.show_error_message)
# Reset downstream status flags.
self.set_status(0)
from timeit import default_timer as timer
from configuration import Configuration
gamma = 0.001
beta = 0.100
rules = {'1': [('0', gamma)], '01': [('11', beta)], '10': [('11', beta)]}
base = 2
N = 8
Nmax = 20
Nmin = 2
size = [0] * Nmax
time = [0] * Nmax
t1 = timer()
Configuration.init_globals(base, N)
adjacency = [[1] * N for i in range(N)]
for k in range(N):
adjacency[k][k] = 0
T = Transition(Configuration, rules)
T.compute(adjacency)
eig_T = T.get_eigenvals()
print('Elapsed time for regular configuration: %s' % (timer() - t1))
print(sys.getsizeof(T.elements))
print(sys.getsizeof(T))
from symmetric_configuration import *
t1 = timer()
SymConf.init_globals(base, N)
TS = Transition(SymConf, rules)
import json
import helper_test
from configuration import Configuration
from helper import Helper
debug = True
configuration = Configuration(name='actioncam',
path=helper_test.config_path(),
debug=debug)
config = configuration.config
helper = Helper(config)
def test_helper_infos():
print('test_infos')
infos = helper.infos_self()
for info in infos:
print(info)
assert len(infos) > 1, 'test_infos failed finding infos'
def test_helper_loghome():
print("test_helper_loghome")
log_good = helper.log_home("actioncam")
print("actioncam log home is " + log_good)
log_bad = helper.log_home("DOESNOTEXIST")
print("all other log home is also " + log_bad)
assert log_good == log_bad, "Failed getting valid Loghome for unknown section"
# -----------------------------------------------------------------------
# amber_test_generation.py
# Author: Hari Raval
# -----------------------------------------------------------------------
import sys
import re
from configuration import Configuration
# default Configuration object to be used in the Amber test generation
default_config = Configuration(timeout=20000,
workgroups=65532,
threads_per_workgroup=1,
saturation_level=0,
subgroup=0)
# write the necessary "boiler plate" code to generate an Amber test, along with Shader
# Storage Buffer Object(s), workgroup size, and global variable to
# assign thread IDs. output is the file being written to, timeout determines (in ms) when the
# program will terminate, num_testing_threads is the number of threads being tested, and saturation_level is the
# type of saturation (if any)
def write_amber_prologue(output, timeout, threads_per_workgroup, workgroups,
num_testing_threads, saturation_level,
subgroup_setting):
output.write("#!amber\n")
output.write("\n")
output.write("SET ENGINE_DATA fence_timeout_ms " + str(timeout) + "\n")
output.write("\n")
output.write("SHADER compute test GLSL\n")
# determine whether the same or different subgroups will be used for testing to update versions and extensions
def bill(self, session, subscriber, destination_number, context, duration):
if context == 'LOCAL':
bill_log.info('===========================================================================')
bill_log.info('LOCAL Context')
bleg_connected = session.getVariable('bleg_uuid')
hangup_cause = session.getVariable('hangup_cause')
subscriber = session.getVariable('bleg_destination_number')
#print session.getVariable('bleg_billsec')
configuration = Configuration()
if context == 'OUTBOUND':
bill_log.info('===========================================================================')
bill_log.info('OUTBOUND Context Bill subscriber %s destination %s' % (subscriber, destination_number))
# get rate
rate = self.get_rate(destination_number)
call_cost = self.get_call_cost(duration, rate[3])
# set destination_name and cost for the CDR
session.setVariable('destination_name', rate[1])
session.setVariable('cost', str(call_cost))
bill_log.info('Call duration: %d sec Call cost: %.2f' % (duration, call_cost))
sub = Subscriber()
try:
previous_balance = sub.get_balance(subscriber)
current_balance = previous_balance - call_cost
real_balance = 0 if current_balance < 0 else current_balance
bill_log.info('Previous balance: %.2f Current Balance: %.2f' % (previous_balance, real_balance))
sub.set_balance(subscriber, real_balance)
bill_log.info('Billing %s completed successfully' % subscriber)
except SubscriberException as e:
bill_log.error('Error during billing the subscriber: %s' % e)
if context == 'INBOUND':
bill_log.info('===========================================================================')
bill_log.info('INBOUND Context')
bleg_connected = session.getVariable('bleg_uuid')
hangup_cause = session.getVariable('hangup_cause')
subscriber = session.getVariable('bleg_destination_number')
#print session.getVariable('bleg_billsec')
configuration = Configuration()
if (bleg_connected != '' and bleg_connected != None) and hangup_cause == 'NORMAL_CLEARING':
bill_log.info('Call B-leg was connected. Bill subscriber %s' % subscriber)
try:
charge_info = configuration.get_charge_inbound_calls()
if charge_info[1] == 'call':
bill_log.info('Charge type: per call, Cost: %s' % charge_info[0])
call_cost = charge_info[0]
try:
sub = Subscriber()
previous_balance = sub.get_balance(subscriber)
current_balance = previous_balance - call_cost
bill_log.info('Previous balance: %.2f Current Balance: %.2f' % (previous_balance, current_balance))
sub.set_balance(subscriber, current_balance)
bill_log.info('Billing %s completed successfully' % subscriber)
except SubscriberException as e:
bill_log.error('Error during billing the subscriber: %s' % e)
elif charge_info[1] == 'min':
bill_log.info('Charge type rate per min, cost per min: %s' % charge_info[0])
# BUG: Cannot get b-leg billsec from FS. Use the billsec of a-leg instead
call_cost = self.get_call_cost(duration, charge_info[0])
bill_log.info('Call duration %s sec Call cost: %s' % (duration, call_cost))
try:
sub = Subscriber()
previous_balance = sub.get_balance(subscriber)
current_balance = previous_balance - call_cost
bill_log.info('Previous balance: %.2f Current Balance: %.2f' % (previous_balance, current_balance))
sub.set_balance(subscriber, current_balance)
bill_log.info('Billing %s completed successfully' % subscriber)
except SubscriberException as e:
bill_log.error('Error during billing the subscriber: %s' % e)
except ConfigurationException as e:
bill_log.error(e)
else:
bill_log.info('Call B-leg was not connected. Not billing subscriber %s' % subscriber)
def main():
global LOG_FILE
parser = argparse.ArgumentParser()
parser.add_argument(
'input_dir',
help='Path to input directory containing test in text format')
parser.add_argument('num_iterations',
type=int,
help='Number of iteration to run each test')
parser.add_argument(
'--android',
action='store_true',
help=
'Run on Android device. Assumes a single Android device is connected, accessible with adb, and with amber already installed as /data/local/tmp/amber_ndk'
)
args = parser.parse_args()
if args.android:
android_sanity_check()
start = time.time()
input_dir = args.input_dir
num_iterations = args.num_iterations
# the user must input the location of the directory where the .amber files will reside
output_dir_path = get_new_dir_name()
# the user may change the flags used to build the amber tests with (include spaces before and after the flag(s))
amber_build_flags = " -d -t spv1.3 "
os.system("mkdir " + output_dir_path)
log_file_name = output_dir_path + "/output_log.txt"
LOG_FILE = open(log_file_name, 'w')
log_print("Date and Time:")
now = datetime.now()
nowpp = now.strftime("%d/%m/%Y %H:%M:%S")
log_print(nowpp)
log_print("Computer:")
log_print(socket.gethostname())
log_print("")
# Store Vulkan info
vulkan_info = output_dir_path + "/vulkaninfo.txt"
if args.android:
log_print("No vulkaninfo on Android")
else:
log_print("storing vulkaninfo to: " + vulkan_info)
log_print("")
os.system("vulkaninfo > " + vulkan_info)
if args.android:
amber_build_path = "" # ignored anyway
else:
amber_build_path = find_amber() + " "
# the user must provide all the possible configuration objects they want to test with, placing them in the
# all_config_variants list below
default_cfg = Configuration(timeout=2000,
workgroups=65532,
threads_per_workgroup=1,
saturation_level=0,
subgroup=0)
round_r_cfg = Configuration(timeout=2000,
workgroups=65532,
threads_per_workgroup=1,
saturation_level=1,
subgroup=0)
chunk_cfg = Configuration(timeout=2000,
workgroups=65532,
threads_per_workgroup=1,
saturation_level=2,
subgroup=0)
diff_subgroup_cfg = Configuration(timeout=2000,
workgroups=65532,
threads_per_workgroup=256,
saturation_level=0,
subgroup=1)
diff_workgroup_cfg = Configuration(timeout=2000,
workgroups=65532,
threads_per_workgroup=4,
saturation_level=0,
subgroup=0)
all_config_variants = [default_cfg, diff_subgroup_cfg, diff_workgroup_cfg]
# call the main driver function
amber_driver(all_config_variants, input_dir, output_dir_path,
amber_build_path, amber_build_flags, num_iterations,
args.android)
end = time.time()
log_print("")
log_print("Execution time (s):")
log_print(str(end - start))
LOG_FILE.close()
import dropletManager
from irc.dict import IRCDict
from irc.bot import SingleServerIRCBot, ServerSpec
from configuration import Configuration
# Basic commands
from command import helpCmd, running_droplet
# User management commands
from command import op_user, unop_user, add_user, rem_user
# Droplet management commands
from command import add_api_key, stop_droplet, list_images, load_most_recent_image, load_named_image
# a list of all commands
from command import commands
default_config = Configuration.from_path("./default_config.json")
def serverOfConfig(config):
return ServerSpec(config.settings[Configuration.IRC_SERVER],
port=config.settings[Configuration.IRC_PORT],
password=config.settings[Configuration.IRC_PASSWD])
class MrDo(SingleServerIRCBot):
def __init__(self, config):
SingleServerIRCBot.__init__(self,
[serverOfConfig(config)],
config.settings[Configuration.IRC_UNAME],
config.settings[Configuration.IRC_UNAME])
self.config = config
self.channel = config.settings[Configuration.IRC_CHAN]
from configuration import Configuration
from boe import Boe, Scraping
# pip install request
# pip install configparser
# pip install beautifulsoup4
config = Configuration('config.properties')
scraping = Scraping()
scraping.get_html(config.get_url())
import googlemaps
import pandas as pd
sys.path.append("../route")
sys.path.append("../utils")
sys.path.append("../config")
from geo_utils import GeoUtils
from pymongo import MongoClient
from configuration import Configuration
from polyline_route import PolylineRoute
""" Creating required instances."""
utils = GeoUtils()
config = Configuration()
gmaps = googlemaps.Client(key=config.API_KEY)
mongo_client = MongoClient(host=config.MONGO_HOST, port=config.MONGO_PORT)
""" User input."""
source = sys.argv[1]
destination = sys.argv[2]
mode = sys.argv[3]
_id = "{}_{}_{}".format(source.lower(), destination.lower(), mode)
""" Creating mongo connection."""
db = mongo_client[config.MONGO_TBT_DB]
coll = db[config.MONGO_ROUTE_COLLECTION]
if not coll.find_one({"_id":_id}):
print ("Hi Buddy, I am calling google API")
def test_interface(self):
###########################################################################
# Test create_interface
Configuration._create(interface_config=str(Interfaces.TEXT))
interface = create_interface()
self.assertEqual(type(interface), TextInterface)
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
from bottle import route, run, debug, template, request, validate, error, static_file, get
from bottle import response
from json import dumps
from player import Player
from configuration import Configuration
from volume_control import VolumeController
from googlemusic import GoogleMusic
# Player object
player = Player()
# Config object
config = Configuration()
# Volume Control object
volume_control = VolumeController()
# Google Music
google_music = GoogleMusic(config.app_settings().google_music_user,
config.app_settings().google_music_password)
####
# UI
####
@route('/')
def index():
def test_property_access(self):
config = Configuration(key1="value1", key2=dict(key2_2="value2_2"))
assert config.key1 == "value1"
assert isinstance(config.key2, Section)
assert config.key2.key2_2 == "value2_2"
class SystrayUi(QtGui.QDialog):
def __init__(self):
super(SystrayUi, self).__init__()
# Get the configuration
self._config = Configuration()
self._socket = None
self._syncFolder = None
self._syncInterval = None
self._remoteHost = None
self._remoteUser = None
self._remoteRepositoryPath = None
staticPath = os.path.join(os.path.dirname(os.path.realpath(__file__)),
"static")
self._respath = os.path.join(staticPath, "img")
self.createLocalSettingsGroupBox()
self.createRemoteSettingsGroupBox()
self.createButtons()
self.createActions()
self.createTrayIcon()
mainLayout = QtGui.QVBoxLayout()
mainLayout.addWidget(self.localSettingsGroupBox)
mainLayout.addWidget(self.remoteSettingsGroupBox)
mainLayout.addStretch(1)
mainLayout.addSpacing(12)
mainLayout.addLayout(self.buttonsLayout)
self.setLayout(mainLayout)
# Read and apply all settings
#self.loadSettings()
# Show the systray icon
self.trayIcon.show()
self.setWindowTitle("PythonDrop")
self.resize(500, 300)
self.hide()
def createButtons(self):
self.okButton = QtGui.QPushButton("&Ok")
self.cancelButton = QtGui.QPushButton("&Cancel")
self.okButton.clicked.connect(self.okClicked)
self.cancelButton.clicked.connect(self.cancelClicked)
self.buttonsLayout = QtGui.QHBoxLayout()
self.buttonsLayout.addStretch(1)
self.buttonsLayout.addWidget(self.okButton)
self.buttonsLayout.addWidget(self.cancelButton)
def createLocalSettingsGroupBox(self):
self.localSettingsGroupBox = QtGui.QGroupBox("Local Settings")
locationLabel = QtGui.QLabel("Sync Folder Location")
self.locationLineEdit = QtGui.QLineEdit()
self.changeLocationButton = QtGui.QPushButton("Change...")
self.changeLocationButton.clicked.connect(self.changeReposPathClicked)
updateIntervalLabel = QtGui.QLabel("Update Interval")
self.updateIntervalSpinBox = QtGui.QSpinBox()
labelUnit = QtGui.QLabel("s")
updateIntervalLayout = QtGui.QHBoxLayout()
updateIntervalLayout.addWidget(updateIntervalLabel)
updateIntervalLayout.addWidget(self.updateIntervalSpinBox)
updateIntervalLayout.addWidget(labelUnit)
locationLayout = QtGui.QHBoxLayout()
locationLayout.addSpacing(20)
locationLayout.addWidget(self.locationLineEdit)
locationLayout.addWidget(self.changeLocationButton)
layout = QtGui.QVBoxLayout()
layout.addWidget(locationLabel)
layout.addLayout(locationLayout)
layout.addSpacing(5)
layout.addLayout(updateIntervalLayout)
self.localSettingsGroupBox.setLayout(layout)
def createRemoteSettingsGroupBox(self):
self.remoteSettingsGroupBox = QtGui.QGroupBox("Remote Settings")
formLayout = QtGui.QFormLayout()
formLayout.setSpacing(5)
self.remoteHostLineEdit = QtGui.QLineEdit()
formLayout.addRow("Remote Host", self.remoteHostLineEdit)
self.remoteUserLineEdit = QtGui.QLineEdit()
formLayout.addRow("Remote User", self.remoteUserLineEdit)
self.remoteReposPathLineEdit = QtGui.QLineEdit()
formLayout.addRow("Remote Repository Path",
self.remoteReposPathLineEdit)
self.remoteSettingsGroupBox.setLayout(formLayout)
def createActions(self):
self.minimizeAction = QtGui.QAction("Mi&nimize",
self,
triggered=self.hide)
self.maximizeAction = QtGui.QAction("Ma&ximize",
self,
triggered=self.showMaximized)
self.restoreAction = QtGui.QAction("&Restore",
self,
triggered=self.showNormal)
self.openPythonDropFolderAction = QtGui.QAction(
"&Open PythonDrop Folder...",
self,
triggered=self.openPythonDropFolder)
self.showPreferencesDialogAction = QtGui.QAction(
"&Preferences...", self, triggered=self.showPreferencesDialog)
self.pauseResumeDaemonAction = QtGui.QAction(
"Pause syncing", self, triggered=self.pauseResumeDaemon)
self.startDaemonAction = QtGui.QAction("Start syncing",
self,
triggered=self.startDaemon)
self.aboutAction = QtGui.QAction("&About",
self,
triggered=self.showAbout)
self.quitAction = QtGui.QAction("&Exit",
self,
triggered=QtGui.qApp.quit)
def createTrayIcon(self):
self.trayIconMenu = QtGui.QMenu(self)
self.trayIconMenu.addAction(self.openPythonDropFolderAction)
self.trayIconMenu.addSeparator()
self.trayIconMenu.addAction(self.pauseResumeDaemonAction)
#self.trayIconMenu.addAction(self.startDaemonAction)
self.trayIconMenu.addSeparator()
self.trayIconMenu.addAction(self.showPreferencesDialogAction)
self.trayIconMenu.addAction(self.aboutAction)
self.trayIconMenu.addSeparator()
self.trayIconMenu.addAction(self.quitAction)
self.trayIcon = QtGui.QSystemTrayIcon(self)
self.trayIcon.setIcon(
QtGui.QIcon(os.path.join(self._respath, "refresh.ico")))
self.trayIcon.setContextMenu(self.trayIconMenu)
def startDaemon(self):
pass
def pauseResumeDaemon(self):
self.sendApiCommand("stop")
def openPythonDropFolder(self):
subprocess.Popen("explorer " + self._config["roshandrop_folder"])
def showPreferencesDialog(self):
self.showNormal()
def cancelClicked(self):
self.hide()
def okClicked(self):
self.applySettings()
self.hide()
def changeReposPathClicked(self):
oldDir = self._config["roshandrop_folder"]
dir = QtGui.QFileDialog.getExistingDirectory(
self, "Select Folder for Repository", oldDir,
QtGui.QFileDialog.ShowDirsOnly)
if dir:
self.locationLineEdit.setText(dir)
def loadSettings(self):
# Read the settings from the daemon
self.readSettings()
self.locationLineEdit.setText(self._syncFolder)
self.updateIntervalSpinBox.setValue(int(self._syncInterval))
self.remoteHostLineEdit.setText(self._remoteHost)
self.remoteUserLineEdit.setText(self._remoteUser)
self.remoteReposPathLineEdit.setText(self._remoteRepositoryPath)
def applySettings(self):
if int(self._config["sync_interval"]
) != self.updateIntervalSpinBox.value():
self.sendApiCommand("update_interval",
str(self.updateIntervalSpinBox.value()))
def showAbout(self):
msgBox = QtGui.QMessageBox()
msgBox.setText("This Software was created by Roshan Lamichhane. ;)")
msgBox.exec_()
def readSettings(self):
self._syncFolder = self.sendApiCommand("get", "syncfolder")
self._syncInterval = self.sendApiCommand("get", "syncinterval")
self._remoteHost = self.sendApiCommand("get", "remotehost")
self._remoteUser = self.sendApiCommand("get", "remoteuser")
self._remoteRepositoryPath = self.sendApiCommand("get", "remoterep")
def writeSettings(self):
pass
def connect(self):
self._socket = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
self._socket.connect(
("127.0.0.1", self._config.get_option('tcpListenPort', 'general')))
# Receive the welcome message
#answer = self.recv_end(self._socket)
def disconnect(self):
if self._socket is not None:
self._socket.close()
def sendApiCommand(self, command, data=None):
answer = None
if self._socket == None:
return
if data == None:
dataToSend = command + "\n\r"
else:
dataToSend = command + " " + data + "\n\r"
self._socket.send(dataToSend)
# Receive the answer
answer = self.recv_end(self._socket)
return answer
End = "\n\r"
def recv_end(self, the_socket):
total_data = []
data = ''
while True:
data = the_socket.recv(8192)
if self.End in data:
total_data.append(data[:data.find(self.End)])
break
total_data.append(data)
if len(total_data) > 1:
#check if end_of_data was split
last_pair = total_data[-2] + total_data[-1]
if self.End in last_pair:
total_data[-2] = last_pair[:last_pair.find(self.End)]
total_data.pop()
break
return ''.join(total_data)
def recv_basic(self, the_socket):
total_data = []
while True:
data = the_socket.recv(8192)
if not data: break
total_data.append(data)
return ''.join(total_data)
import sys
from collections import deque
import imageio
import matplotlib.pyplot as plt
from classifier import Classifier
from configuration import Configuration
from helper import Helper
from lane_detection import LaneDetection
from pre_processing import PreProcessing
from window_search import WindowSearch
config = Configuration().__dict__
sys.path.append("implementation/")
def __main__():
# get video stream
video_cap = imageio.get_reader(config["project_video"])
# polynomial lane fit
lanes_fit = []
# history of heatmaps to reject false positives
history = deque(maxlen=config["history_limit"])
# classifier and scaler
classifier = Classifier.get_trained_classifier(use_pre_trained=True)
# load calibration parameters:
camera_matrix, dist_coef = PreProcessing.load_calibration_params()
def initLogging(verbose=False, console='stdout', consoleLevel='DEBUG'):
"""
Initilize NuPic logging by reading in from the logging configuration file. The
logging configuration file is named 'nupic-logging.conf' and is expected to be
in the format defined by the python logging module.
If the environment variable 'NTA_CONF_DIR' is defined, then the logging
configuration file is expected to be in the NTA_CONF_DIR directory. If
NTA_CONF_DIR is not defined, then it is found in the 'conf/default'
subdirectory of the NuPic installation directory (typically
~/nta/current/conf/default)
The logging configuration file can use the environment variable 'NTA_LOG_DIR'
to set the locations of log files. If this variable is not defined already in
the environment, this method will set it to the 'logs' subdirectory of the
NuPic install directory (typically ~/nta/eng/logs) before loading in the
configuration file.
console: Defines console output for the default "root" logging
configuration; this may be one of 'stdout', 'stderr', or None;
Use None to suppress console logging output
consoleLevel:
Logging-level filter string for console output corresponding to
logging levels in the logging module; may be one of:
'DEBUG', 'INFO', 'WARNING', 'ERROR', or 'CRITICAL'.
E.g., a value of'WARNING' suppresses DEBUG and INFO level output
to console, but allows WARNING, ERROR, and CRITICAL
"""
# NOTE: If you call this twice from the same process there seems to be a
# bug - logged messages don't show up for loggers that you do another
# logging.getLogger() on.
global gLoggingInitialized
if gLoggingInitialized:
if verbose:
print >> sys.stderr, "Logging already initialized, doing nothing."
return
consoleStreamMappings = {
'stdout': 'stdoutConsoleHandler',
'stderr': 'stderrConsoleHandler',
}
consoleLogLevels = [
'DEBUG', 'INFO', 'WARNING', 'WARN', 'ERROR', 'CRITICAL', 'FATAL'
]
assert console is None or console in consoleStreamMappings.keys(), (
'Unexpected console arg value: %r') % (console, )
assert consoleLevel in consoleLogLevels, (
'Unexpected consoleLevel arg value: %r') % (consoleLevel)
# -----------------------------------------------------------------------
# Setup logging. Look for the nupic-logging.conf file, first in the
# NTA_CONFIG_DIR path (if defined), then in a subdirectory of the nupic
# module
# TODO: move into nupic.support
configFilename = 'nupic-logging.conf'
try:
configFilePath = Configuration.findConfigFile(configFilename)
except:
configFilePath = None
# If NTA_LOG_DIR is not defined, set it now. This is used by the logging
# config file to set the path for the log files
if 'NTA_LOG_DIR' not in os.environ:
os.environ['NTA_LOG_DIR'] = os.path.join(nupic.rootDir, 'logs')
if not os.path.exists(os.environ['NTA_LOG_DIR']):
makeDirectoryFromAbsolutePath(
os.path.abspath(os.environ['NTA_LOG_DIR']))
# Load in the logging configuration file
if configFilePath is None:
print >> sys.stderr, (
"WARNING: Could not find the logging configuration file " \
"(filename: '%s', expected to be in search path: %s). Logging is " \
" disabled.") % (configFilename, Configuration.getConfigPaths())
else:
if verbose:
print >> sys.stderr, ("Using logging configuration file: %s") % (
configFilePath)
# This dict will hold our replacement strings for logging configuration
replacements = dict()
def makeKey(name):
""" Makes replacement key """
return "$$%s$$" % (name)
platform = sys.platform.lower()
if platform.startswith('java'):
# Jython
import java.lang
platform = java.lang.System.getProperty("os.name").lower()
if platform.startswith('mac os x'):
platform = 'darwin'
if platform.startswith('darwin'):
replacements[makeKey(
'SYSLOG_HANDLER_ADDRESS')] = '"/var/run/syslog"'
elif platform.startswith('linux'):
replacements[makeKey('SYSLOG_HANDLER_ADDRESS')] = '"/dev/log"'
else:
raise RuntimeError(
"This platform is neither darwin nor linux: %s" %
(sys.platform, ))
if False: #os.path.isdir('/var/log/numenta/nupic'):
# NOTE: Not using syslogHandler for now because it either truncates or
# drops messages over ~1,400 bytes (depending on platform)
# Nupic logs go to syslog. Also, SysLogHandler raises an exception
# on jython (at least on 2.5.2): "AttributeError: 'module' object has no
# attribute 'AF_UNIX'" (jython is used by a sub-moduleof
# ClientJobManager)
replacements[makeKey('PERSISTENT_LOG_HANDLER')] = 'syslogHandler'
else:
# Nupic logs go to file
replacements[makeKey('PERSISTENT_LOG_HANDLER')] = 'fileHandler'
# Set up log file path for the default file handler
logFilePath = _genLoggingFilePath()
makeDirectoryFromAbsolutePath(os.path.dirname(logFilePath))
replacements[makeKey('FILE_HANDLER_LOG_FILENAME')] = repr(
logFilePath)
# Set up root logger
replacements[makeKey('ROOT_LOGGER_HANDLERS')] = (
replacements[makeKey('PERSISTENT_LOG_HANDLER')])
if console is not None:
replacements[makeKey('ROOT_LOGGER_HANDLERS')] += (
',' + consoleStreamMappings[console])
# Set up log level for console handlers
replacements[makeKey('CONSOLE_LOG_LEVEL')] = consoleLevel
customConfig = StringIO()
with open(configFilePath) as src:
for lineNum, line in enumerate(src):
if "$$" in line:
for (key, value) in replacements.items():
line = line.replace(key, value)
# If there is still a replacement string in the line, we're missing it
# from our replacements dict
if "$$" in line and "$$<key>$$" not in line:
raise RuntimeError(
("The text %r, found at line #%d of file %r, "
"contains a string not found in our replacement "
"dict.") % (line, lineNum, configFilePath))
customConfig.write(line)
customConfig.seek(0)
if version.StrictVersion(
python_version()) >= version.StrictVersion('2.6'):
# NOTE: the disable_existing_loggers arg is new as of python 2.6, so it's
# not supported on our jython interperter, which was v2.5.x as of this
# writing
logging.config.fileConfig(customConfig,
disable_existing_loggers=False)
else:
logging.config.fileConfig(customConfig)
gLoggingInitialized = True
from tests.my_test_case import MyTestCase
from configuration import Configuration
configurations = Configuration()
from FAdo.fa import sConcat
from FAdo.reex import *
#from yappy_parser import Yappy
class TestFado(MyTestCase):
def setUp(self):
pass
def test_dfa(self):
r2 = str2regexp("(k+s+t)(Y)*", no_table=0).toDFA()
self.write_to_dot_to_file(r2, "r2")
if __name__ == '__main__':
# Images can either be extracted from a video file or a batch of single photographs. Select
# the example for the test run.
type = 'video'
if type == 'image':
names = glob('Images/2012*.tif')
# names = glob.glob('Images/Moon_Tile-031*ap85_8b.tif')
# names = glob.glob('Images/Example-3*.jpg')
else:
names = 'Videos/another_short_video.avi'
print(names)
# Get configuration parameters.
configuration = Configuration()
configuration.initialize_configuration()
try:
frames = Frames(configuration, names, type=type)
print("Number of images read: " + str(frames.number))
print("Image shape: " + str(frames.shape))
except Error as e:
print("Error: " + e.message)
exit()
# Rank the frames by their overall local contrast.
rank_frames = RankFrames(frames, configuration)
start = time()
rank_frames.frame_score()
end = time()
print('Elapsed time in ranking images: {}'.format(end - start))
def run(config_path: Path, experiment_path: Path, skip_list: List[str],
ssh_password: str) -> None:
config: Configuration = Configuration.load(config_path)
_build_project(config, skip_list)
_deploy_project(config_path, experiment_path, skip_list, ssh_password)
def validateConfig():
try:
cc = Configuration(request.form['config'])
return "OK"
except ConfigurationException as ce:
return str(ce)
def main():
# check '~/.pyraxshell' and config files exist, create them if missing
if not check_dir_home():
print("This is the first time 'pyraxshell' runs, please, configure "
"'%s' according to your needs" % CONFIG_FILE)
#create db
DB()
Sessions.Instance().create_table_sessions() # @UndefinedVariable
Sessions.Instance().create_table_commands() # @UndefinedVariable
# create default configuration file
Configuration.Instance() # @UndefinedVariable
sys.exit(0)
# ########################################
# VERSION CHECK
if not version.check_version_file():
sys.exit(1)
# ########################################
# LOGGING
start_logging()
logging.debug('starting')
# from baseconfigfile import BaseConfigFile
# bcf = BaseConfigFile()
# ########################################
# ACCOUNTS
accounts = Account.Instance() # @UnusedVariable @UndefinedVariable
# config file is read by 'BaseConfigFile' constructor
# ########################################
# CONFIGURATION
cfg = Configuration.Instance() # @UndefinedVariable
# override settings with CLI params
cfg.parse_cli(sys.argv)
logging.debug("configuration: %s" % cfg)
# set user's log level if specified
if not Configuration.Instance().log_level == None: # @UndefinedVariable
l = logging.getLogger()
for h in l.handlers:
h.setLevel(cfg.log_level)
# ########################################
# START SESSION
Sessions.Instance().start_session() # @UndefinedVariable
# Sessions.Instance().insert_table_commands('IN', 'OUT') # @UndefinedVariable
# ########################################
# DO STUFF
# handle configuration
if cfg.pyrax_http_debug == True:
pyrax.set_http_debug(True)
if cfg.pyrax_no_verify_ssl == True:
# see: https://github.com/rackspace/pyrax/issues/187
pyrax.set_setting("verify_ssl", False)
# start notifier
Notifier().start()
# main loop
Cmd_Pyraxshell().cmdloop()
from feature_table import FeatureTable
from constraint_set import ConstraintSet
from grammar import Grammar
from lexicon import Lexicon
from lexicon import Word
from configuration import Configuration
from tests.persistence_tools import get_feature_table_fixture, get_constraint_set_fixture
from simulations.dag_zook import configurations_dict
from constraint import VowelHarmonyConstraint, PhonotacticConstraint
from transducer import Transducer
from debug_tools import write_to_dot as dot
configuration = Configuration()
configuration.load_configurations_from_dict(configurations_dict)
feature_table = FeatureTable.load(get_feature_table_fixture("vowel_harmony_simple_feature_table.json"))
constraint_set = ConstraintSet.load(get_constraint_set_fixture("vowel_harmony_simple_constraint_set.json"))
data = ["unu", "uku", "nunu", "kunu", "nuku", "kuku",
"ini", "iki", "nini", "kini", "niki", "kiki",
"unukun", "ukukun", "nunukun", "kunukun", "nukukun", "kukukun",
"inikin", "ikikin", "ninikin", "kinikin", "nikikin", "kikikin"]
max_word_length_in_data = max([len(word) for word in data])
lexicon = Lexicon(data, max_word_length_in_data)
grammar = Grammar(constraint_set, lexicon)
grammar_transducer = grammar.get_transducer()
| (__ | | | | | (_) | | | \__ \ | | \__ \ \__ \ | __/ / / \ V / | (_) | | |_ | | | __/ | | | | | | \ V / | __/ | (_| | | |_| |
\___|_|_| |_| _\___/_ |_| |___/ |_|_|___/_|___/ \___| /___| \_/ \___/ \__| |_| \___| |_| |_| |_| \_/ \___| \__,_| \__,_|
__ __ __ ___ __ ____ __
/ / /_ | / / |__ \ / / |___ \ \ \
| | | | / / ) | / / __) | | |
| | | | / / / / / / |__ < | |
| | | | / / / /_ / / ___) | | |
| | |_| /_/ |____| /_/ |____/ | |
\_\ /_/
""")
lvl = int(input("Entrez votre niveau : "))
configuration = Configuration(lvl)
Niveau = configuration.config(lvl)
joueur = Niveau.getJoueur()
l = Niveau.getLabyrinthe()
cls()
print("""
_
| |
| | ___
| | / _ \
| |____ | __/
|______| \___|
_ _ _ _ _
# Coroutine concurrency (http://sdiehl.github.io/gevent-tutorial/#core) imports
import grequests
import gevent
# This method is used as a callback for the asynchronous network communications used to speak to the hub.
# Our version is very simplistic and just outputs the HTTP Response Code to the console.
def printStatus(response, **kwargs):
print("Insteon response was {}".format(response.status_code))
# The following allows us to specify the IP address, username and password in a more friendly JSON configuration file rather than
# hardcoding the values in the Python source.
configuration = Configuration()
config = configuration.loadConfig()
hub = config['insteon']
class Insteon():
def turn(self, deviceId='', onOrOff=''):
if onOrOff == 'on':
self.turnLightOn(deviceId)
if onOrOff == 'off':
self.turnLightOff(deviceId)
def turnLightOn(self, deviceId):
# The grequests library sends the request as soon as we create "job" below. We then yield to the greenlet every hundredth of a second
# in the main update method to ensure we capture the result.
base64string = base64.encodestring(
