def test_getData_area_cut_date(self):
# both testfiles have enough rainfall in swath at 0.5 mm threshold and given box
area=[-15, 5, 15, 20]
min_rain_swath = 2000
min_rain_box = 500
min_tpixel = 2500
rain_thresh = 0.5
obj = trmm.ReadWA(test_dir, area=area)
td=obj.get_data(obj.fpaths[1])
box = np.where((td['lon'].values > area[0]) & (td['lon'].values < area[2]) & (td['lat'].values > area[1]) & (td['lat'].values < area[3]))
# files are properly filtered according to the rain/box overlap thresholds
assert len(box[0]) > min_tpixel
assert np.sum(td['p'].values[box] > rain_thresh) > min_rain_box
# use cut on two files
obj = trmm.ReadWA(test_dir)
td = obj.get_data(obj.fpaths[0], cut = [8,10])
assert td['lat'].values[:, 0].max() <= 10
assert td['lat'].values[:, 0].min() >= 8
td = obj.get_data(obj.fpaths[1])
assert td['lat'].values[:, 0].max() >= 10
assert td['lat'].values[:, 0].min() <= 8
# get time and via index get same array, cut works the same
td = obj.get_ddata(2007,8,16,19,16, cut = [8,10])
assert td['lat'].values[:, 0].max() <= 10
assert td['lat'].values[:, 0].min() >= 8
td2 = obj.get_data(obj.fpaths[0], cut = [8, 10])
assert_array_equal(td2['p'].values, td['p'].values)
assert_array_equal(td2['flags'].values, td['flags'].values)
def test_trmmReadWA(self):
obj = trmm.ReadWA(test_dir)
files = obj.fpaths
assert files == [
test_dir+'/2007/08/2A25.20070816.55562.7.gra',
test_dir+'/2007/08/2A25.20070817.55577.7.gra']
with self.assertRaises(SystemExit):
trmm.ReadWA(test_dir, yrange=range(1999,2000))
def test_write_netcdf(self):
obj = trmm.ReadWA(test_dir)
with self.assertRaises(OSError):
da = obj.get_data(obj.fpaths[1], netcdf_path='/does/not/exist/test.nc')
da = obj.get_data(obj.fpaths[1], netcdf_path= test_write+'/test.nc')
def test_ll_to_MSG_TRMM(self):
test_dir = '/users/global/cornkle/data/pythonWorkspace/proj_CEH/eod/tests/test_files/trmm'
obj = trmm.ReadWA(test_dir)
dat = obj.get_data(obj.fpaths[0], cut=[3, 4])
lon = dat['lon'].values
lat = dat['lat'].values
dir = tm_utils.ll_toMSG(lon, lat)
assert np.unique(ua.unique_of_pair(dir['x'],
dir['y'])).size == lon.size
def netcdf():
trmm_folder = "/users/global/cornkle/data/OBS/TRMM/trmm_swaths_WA/"
box = [-11, 9, 11, 21] # W, S, E, N
#
# # make grid
# # define projection
# proj = pyproj.Proj('+proj=merc +lat_0=0. +lon_0=0.')
# # get lower left x,y fr 10W, 4N
# x, y = pyproj.transform(salem.wgs84, proj, [box[0], box[2]], [box[1], box[3]])
# dx = 5000 # 5km grid
# nx, r = divmod(x[1] - x[0], dx)
# ny, r = divmod(y[1] - y[0], dx)
# # make salem grid
# grid = salem.Grid(nxny=(nx, ny), dxdy=(5000, 5000), ll_corner=(x[0], y[0]), proj=proj)
lsta = xr.open_dataset(constants.LSTA_TESTFILE)
grid = lsta.salem.grid
xi, yi = grid.ij_coordinates
lon, lat = grid.ll_coordinates
t = trmm.ReadWA(trmm_folder, yrange=YRANGE, area=[box[0], box[1], box[2], box[3]])
cnt = 0
# cycle through TRMM dates - only dates tat have a certain number of pixels in llbox are considered
for _y, _m, _d, _h, _mi in zip(t.dates.y, t.dates.m, t.dates.d, t.dates.h, t.dates.mi):
# dummy = np.empty((ny,nx))*-100#np.NAN
td = t.get_ddata(_y, _m, _d, _h, _mi, cut=[box[1], box[3]])
date = [pd.datetime(_y, _m, _d, _h, _mi)]
print(date)
# ensure minimum trmm rainfall in area
if len(np.where(td['p'].values > 0)[0]) < 100: # at least 100 pixel with rainfall
print('Kickout: TRMM min pixel = 100')
continue
# Transform lons, lats to grid
xt, yt = grid.transform(td['lon'].values.flatten(), td['lat'].values.flatten(), crs=salem.wgs84)
# Convert for griddata input
tpoints = np.array((yt, xt)).T
inter = np.array((np.ravel(yi), np.ravel(xi))).T
# Interpolate using delaunay triangularization
dummyt = griddata(tpoints, td['p'].values.flatten(), inter, method='linear')
outt = dummyt.reshape((grid.ny, grid.nx))
for nb in range(5):
boole = np.isnan(outt)
outt[boole] = -1000
grad = np.gradient(outt)
outt[boole] = np.nan
outt[abs(grad[1]) > 300] = np.nan
outt[abs(grad[0]) > 300] = np.nan
if np.nanmin(outt)<0:
continue
print('Makes no sense!')
# # add MSG
# # define the "0 lag" frist
# msg_folder = '/users/global/cornkle/data/OBS/meteosat_SA15'
# m = msg.ReadMsg(msg_folder)
# arr = np.array([15, 30, 45, 60, 0])
# dm = arr - _mi
# ind = (np.abs(dm)).argmin()
#
# dt0 = dm[ind]
# ndate = date + dt.timedelta(minutes=int(dt0))
#
# m.set_date(ndate.year, ndate.month, ndate.day, ndate.hour, ndate.minute)
#
# if not m.dpath:
# print('Date missing')
# out = np.empty_like(outt)
# out.fill(np.nan)
#
# else:
# ml0 = m.get_data(llbox=box)
#
# xm, ym = grid.transform(ml0['lon'].values.flatten(), ml0['lat'].values.flatten(), crs=salem.wgs84)
# mpoints = np.array((ym, xm)).T
# out = griddata(mpoints, ml0['t'].values.flatten(), inter, method='linear')
# out = out.reshape((grid.ny, grid.nx))
#
#
# da = xr.Dataset({'p': (['x', 'y'], outt),
# # 't': (['x', 'y'], out)
# },
# coords={'lon': (['x', 'y'], lon),
# 'lat': (['x', 'y'], lat),
# 'time': date})
da = xr.DataArray(outt[None,...],
coords={'time': date, 'lat': lat[:,0], 'lon': lon[0,:]},
dims=['time', 'lat', 'lon']) # [np.newaxis, :]
ds = xr.Dataset({'p': da})
savefile = '/users/global/cornkle/TRMMfiles/' + date[0].strftime('%Y-%m-%d_%H:%M:%S') + '.nc'
try:
os.remove(savefile)
except OSError:
pass
ds.to_netcdf(path=savefile, mode='w')
print('Saved ' + savefile)
cnt = cnt + 1
print('Saved ' + str(cnt) + ' TRMM swaths as netcdf.')
def tm_overlap_blobs():
trmm_folder = "/users/global/cornkle/data/OBS/TRMM/trmm_swaths_WA/"
msg_folder = '/users/global/cornkle/data/OBS/meteosat_WA30'
tObj = trmm.ReadWA(trmm_folder, area=AREA, yrange=YRANGE)
mObj = msg.ReadMsg(msg_folder)
files = tObj.fpaths
dates = tObj.dates
mdic = defaultdict(list)
mdic_f = defaultdict(list)
mlon = mObj.lon
mlat = mObj.lat
mll = tm_utils.ll_toMSG(mlon, mlat)
mxy = ua.unique_of_pair(mll['x'], mll['y'])
cnt = 0
datess = []
# cycle through TRMM dates - only dates tat have a certain number of pixels in llbox are considered
for _y, _m, _d, _h, _mi in zip(dates.y, dates.m, dates.d, dates.h,
dates.mi):
# set zero shift time for msg
date = dt.datetime(_y, _m, _d, _h, _mi)
dt0 = tm_utils.minute_delta(_mi, 30)
print('TRMM', date, 'dt', dt0, 'MSG',
date + dt.timedelta(minutes=int(dt0)))
#time difference max
# if abs(dt0) > 4:
# continue
ndate = date + dt.timedelta(minutes=int(dt0))
print('TRMM', date, 'MSG', ndate)
mObj.set_date(ndate.year, ndate.month, ndate.day, ndate.hour,
ndate.minute)
if not (mObj.tpath or mObj.bpath):
print('No table or blob file, continue')
continue
dff = mObj.get_table()
dstring = str(ndate.year) + '-' + str(
ndate.month).zfill(2) + '-' + str(ndate.day).zfill(2) + ' ' + str(
ndate.hour).zfill(2) + ':' + str(
ndate.minute).zfill(2) + ':' + str(00).zfill(2)
if not dstring in dff['Date'].as_matrix():
continue
sel = dff.loc[dff['Date'] == dstring]
big = sel.loc[sel['Area'] >= 25000] # only mcs over 25.000km2
print('big area', big['Area'].values)
if big.empty:
continue
td = tObj.get_ddata(_y, _m, _d, _h, _mi, cut=[0, 22])
try:
if not td:
print('TRMM problem')
continue
except:
pass
md = mObj.get_data(llbox=AREA)
md_blob = mObj.get_blob(llbox=AREA)
blobs = md_blob.values
blat = big['Lat'].values.tolist()
blon = big['Lon'].values.tolist()
barea = big['Area'].values.tolist()
btemp = big['Temp'].values.tolist()
for lon, lat, bt, ba in zip(blon, blat, btemp, barea):
mcs = tm_utils.ll_toMSG(lon, lat)
point = np.where((mll['x'] == mcs['x']) & (mll['y'] == mcs['y']))
# if not all(point):
# if mcs['x'] > mll['x'].max() or mcs['x'] < mll['x'].min() or mcs['y'] > mll['y'].max() or mcs['y'] < mll['y'].min():
# continue
# else:
# print('Point not found but should be in!')
# continue
# blob number
nb = blobs[point]
# if we find a 0 instead of a blob, continue
if not nb[0]:
continue
isblob = np.where(blobs == nb)
if isblob[0].size < 2500:
print('Ooops blob too small? This should not happen')
continue
# lat lons of complete blob
blats = md['lat'].values[isblob]
blons = md['lon'].values[isblob]
# msg indices of complete blob
my = mll['y'][isblob]
mx = mll['x'][isblob]
blatmin, blatmax = blats.min(), blats.max()
blonmin, blonmax = blons.min(), blons.max()
# whole blob must be inside TRMM. Attention: This draws a rectangle.
# There is still a chance that blob is not in TRMM. Checked later!
if not (td['lon'].values.min() <
blonmin) & (td['lon'].values.max() > blonmax):
continue
if not (td['lat'].values.min() <
blatmin) & (td['lat'].values.max() > blatmax):
continue
ll_trmm = tm_utils.ll_toMSG(td['lon'].values, td['lat'].values)
tx = ll_trmm['x']
ty = ll_trmm['y']
mpair = ua.unique_of_pair(mx, my)
tpair = ua.unique_of_pair(tx, ty)
#Do we need to do it that way?
inter = np.in1d(tpair, mpair) # returns false and true, whole grid
inter_rev = np.in1d(
mpair, tpair.flat[inter]
) # Attention: this leaves out meteosat cells where no closest TRMM cell (since TRMM is coarser!)
# have at least 500 pixels shared for MCS between TRMM and MSG
if sum(inter) < 500:
continue
print(_y, _m, _d, _h, _mi)
bprcp = td['p'].values.flat[inter]
bflags = td['flags'].values.flat[inter]
mtt = md['t'].values[isblob].flat[inter_rev]
# we need same number of TRMM and MSG per plot to do the masking
if not bprcp.size == mtt.size:
print('Tprcp and MSGT not same, someting wrong!')
continue
# rtest = np.copy(td['p'].values) # check the TRMM pixels identified
# rtest.flat[inter] = 1500 # np.where(inter)
#
#
# maskr = np.zeros_like(md['t'].values)
# maskr[isblob] = 1000
# # np.where(maskr>999)
#
# mxinter = np.in1d(mxy, mpair[inter_rev])
# maskrr = np.zeros_like(md['t'].values)
# maskrr.flat[mxinter] = 1100
#
# plt.figure()
# ax = plt.axes(projection=ccrs.PlateCarree())
#
# plt.contourf(mlon, mlat, maskr,
# transform=ccrs.PlateCarree()) # green, MSG blob
# plt.contourf(td['lon'].values, td['lat'].values, rtest, levels=np.arange(1300, 1600, 100),
# transform=ccrs.PlateCarree()) # identified TRMM pixel
# #Identified MSG temperatures, problem: only nearest to TRMM, omits MSG pixels
# plt.contourf(mlon, mlat, maskrr, levels=np.arange(1097, 1099, 1),
# transform=ccrs.PlateCarree()) # green, MSG blob
# ax.coastlines()
if np.count_nonzero(bprcp) < 50:
continue
mask = tm_utils.getTRMMconv(bflags) # filter for convective rain
mask = np.array(mask)
smask = tm_utils.getTRMMstrat(bflags) # filter for convective rain
smask = np.array(smask)
nz_bprcp = np.sum(bprcp > 0.1)
tall = np.nanmean(mtt[np.isfinite(bprcp)])
# remove all these zero rainfall from blob
bprcpNZ = bprcp[bprcp > 0.1]
mttNZ = mtt[bprcp > 0.1]
flagsNZ = bflags[bprcp > 0.1]
maskNZ = tm_utils.getTRMMconv(
flagsNZ) # list of 0 and 1, flattened!
smaskNZ = tm_utils.getTRMMstrat(
flagsNZ) # list of 0 and 1, flattened!
if sum(maskNZ) < 2:
continue
datess.append(
(_y, _m, _d, _h, _mi, ba, td['lon'].values.min(),
td['lon'].values.max(), td['lat'].values.min(),
td['lat'].values.max(), blonmin, blonmax, blatmin, blatmax))
pm = np.nanmean(bprcpNZ)
tm = np.nanmean(mttNZ)
ppm = np.percentile(bprcpNZ, 98)
pmax = np.nanmax(bprcp)
pi = float(np.sum(bprcpNZ > 30)) / float(bprcpNZ.size)
mdic['p'].append(pm) # prcp mean of every MCS (no zero)
mdic['pp'].append(ppm) # value of 98 percentile of MCS (no zero)
mdic['rain'].append(bprcpNZ) # whole rainfall field, no sum
mdic['pmax'].append(pmax) # maximum pcp in MCS
mdic['pi'].append(pi) # share of > 30mmh pixel of > 0 pixel
mdic['t'].append(tm) # T where PCP > 0 and overlap
mdic['tall'].append(
tall) # T where cloud and TRMM valid (incl 0 rain)
mdic['hod'].append(_h) # hour of day for image
mdic['yr'].append(_y) # year for image
mdic['mon'].append(_m) # month for image
mdic['lat'].append(lat)
mdic['lon'].append(lon)
mdic['tpixel_nzero'].append(
nz_bprcp) # nb pixel of MCS for PCP > 0
mdic['tpixel'].append(bprcp.size) # nb pixel of MCS including 0
mdic['tpixel_conv'].append(sum(mask)) # number convective pixel
mdic['tpixel_strat'].append(sum(smask)) # number stratiform pixel
mdic['tpixel_zero'].append(np.size(bprcp) -
np.size(nz_bprcp)) # number zero pixel
mdic['twhole'].append(bt)
mdic['area'].append(isblob[0].size)
print('Passed flag filter')
# check for at least 500 TRMM pixels in MSG above 0 rain
# if np.count_nonzero(bprcp) < 500:
# continue
pc = np.nanmean(bprcpNZ.flat[np.where(maskNZ)])
tc = np.nanmean(mttNZ.flat[np.where(maskNZ)])
pic = float(np.greater(bprcpNZ.flat[np.where(maskNZ)],
30.).sum()) / float(sum(maskNZ))
ppc = np.percentile(bprcpNZ.flat[np.where(maskNZ)], 98)
pmaxc = bprcpNZ.flat[np.where(maskNZ)].max()
# print 'Nb', nb
mdic_f['pconv'].append(pc)
mdic_f['piconv'].append(pic)
mdic_f['ppconv'].append(ppc)
mdic_f['pmaxconv'].append(pmaxc)
mdic_f['tconv'].append(tc)
mdic_f['tnfconv'].append(tm)
mdic_f['hod'].append(_h)
mdic_f['yr'].append(_y)
mdic_f['mon'].append(_m)
mdic_f['lat'].append(lat)
mdic_f['lon'].append(lon)
mdic_f['tpixel_convNZ'].append(sum(maskNZ))
mdic_f['tpixel_stratNZ'].append(sum(smaskNZ))
cnt = cnt + 1
print(cnt)
myDicts = [mdic, mdic_f]
for d in datess:
print(d)
pkl.dump(
myDicts,
open('/users/global/cornkle/data/OBS/test/c_paper_rainfield.p', 'wb')
) # MSG_TRMM_temp_pcp_300px'+str(yrange[0])+'-'+str(yrange[-1])+'_new.p', 'wb'))
print('Saved ' + 'MSG_TRMM_temp_pcp_' + str(YRANGE[0]) + '-' +
str(YRANGE[-1]) + '_new.p with ' + str(cnt) + ' MCSs')
def saveMCS():
trmm_folder = "/users/global/cornkle/data/OBS/TRMM/trmm_swaths_WA/"
msg_folder = '/users/global/cornkle/data/OBS/meteosat_WA30'
t = trmm.ReadWA(trmm_folder, yrange=YRANGE, area=[-15, 4, 20, 25]) # (ll_lon, ll_lat, ur_lon, ur_lat) define initial TRMM box and scan for swaths in that box
m = msg.ReadMsg(msg_folder)
cnt = 0
# minute array to find closest MSG minute
arr = np.array([15, 30, 45, 60, 0])
# loop through TRMM dates - only dates that have a certain number of pixels in llbox are considered
for _y, _m, _d, _h, _mi in zip(t.dates.y, t.dates.m, t.dates.d, t.dates.h, t.dates.mi):
tdic = t.get_ddata(_y, _m, _d, _h, _mi, cut=[3,26]) # cut TRMM data at lower/upper lat
#get value of closest minute
dm = arr - _mi
dm = dm[dm<0]
try:
ind = (np.abs(dm)).argmin()
except ValueError:
continue
# set smallest lag time for msg
date = dt.datetime(_y, _m, _d, _h, _mi)
dt0 = dm[ind]
ndate = date + dt.timedelta(minutes=int(dt0))
m.set_date(ndate.year, ndate.month, ndate.day, ndate.hour, ndate.minute)
mdic = m.get_data(llbox=[tdic['lon'].values.min(), tdic['lat'].values.min(), tdic['lon'].values.max(),tdic['lat'].values.max()])
# check whether date is completely missing or just 30mins interval exists
if not mdic:
dm = np.delete(dm, np.argmin(np.abs(dm)), axis=0)
# try second closest minute
try:
dummy = np.min(np.abs(dm))> 15
except ValueError:
continue
if dummy:
print('Date missing')
continue
ind = (np.abs(dm)).argmin()
dt0 = dm[ind]
ndate = date + dt.timedelta(minutes=int(dt0))
m.set_date(ndate.year, ndate.month, ndate.day, ndate.hour, ndate.minute)
mdic = m.get_data(llbox=[tdic['lon'].values.min(), tdic['lat'].values.min(), tdic['lon'].values.max(),
tdic['lat'].values.max()])
if not mdic:
print('Date missing')
continue
print('TRMM:', date, 'MSG:', ndate.year, ndate.month, ndate.day, ndate.hour, ndate.minute )
lon1 = mdic['lon'].values # MSG coords
lat1 = mdic['lat'].values
mdic['t'].values[mdic['t'].values >= -10] = 0 # T threshold -10 for clouds
### filter minimum cloud size
labels, numL = label(mdic['t'].values)
u, inv = np.unique(labels, return_inverse=True)
n = np.bincount(inv)
goodinds = u[n > 39] # defines minimum MCS size e.g. 9x39 ~ 350km2
print(goodinds) # indices of clouds of "good size"
if not sum(goodinds) > 0:
continue
for gi in goodinds:
if gi == 0: # index 0 is always background, ignore!
continue
inds = np.where(labels == gi) # position of cloud
# cut a box for every single blob (cloud) from msg - get min max lat lon of the blob, cut upper lower from TRMM to match blob
latmax, latmin = lat1[inds].max(), lat1[inds].min()
lonmax, lonmin = lon1.values[inds].max(), lon1[inds].min()
mmeans = np.percentile(mdic['t'].values[inds], 90)
td = t.get_ddata(_y, _m, _d, _h, _mi, cut=[latmin - 1, latmax + 1]) # for each cloud, cut TRMM swath
dt0 = dm[ind]
ml0 = m.get_data(llbox=[lonmin - 1, latmin - 1, lonmax + 1, latmax + 1]) # cut cloud box in MSG
if not ml0:
continue
#make salem grid
grid = u_grid.make(ml0['lon'].values, ml0['lat'].values,5000) # 5km regular grid from lat/lon coords
lon, lat = grid.ll_coordinates # 5km grid lat/lon coordinates
# interpolate TRMM and MSG to 5km common grid
inter, mpoints = u_grid.griddata_input(ml0['lon'].values, ml0['lat'].values,grid)
inter, tpoints = u_grid.griddata_input(td['lon'].values, td['lat'].values, grid)
# Interpolate TRMM using delaunay triangularization
try:
dummyt = griddata(tpoints, td['p'].values.flatten(), inter, method='linear')
except ValueError:
continue
outt = dummyt.reshape((grid.ny, grid.nx))
if np.sum(np.isfinite(outt)) < 5: # at least 5 valid pixel
print('Kickout: TRMM min pixel < 5')
continue
# Interpolate TRMM flags USING NEAREST
dummyf = griddata(tpoints, td['flags'].values.flatten(), inter, method='nearest')
outf = dummyf.reshape((grid.ny, grid.nx))
outf=outf.astype(np.float)
isnot = np.isnan(outt)
outf[isnot]=np.nan
##remove artefact edges of interpolated TRMM
for nb in range(5):
boole = np.isnan(outt)
outt[boole] = -1000
grad = np.gradient(outt)
outt[boole] = np.nan
outt[abs(grad[1]) > 300] = np.nan
outt[abs(grad[0]) > 300] = np.nan
outf[abs(grad[1]) > 300] = np.nan
outf[abs(grad[0]) > 300] = np.nan
#get convective rainfall only
outff = tm_utils.getTRMMconv(outf) ## from TRMM flags, get positions of convective rain
outk = np.zeros_like(outt)
outk[np.where(outff)]=outt[np.where(outff)]
# Interpolate MSG using delaunay triangularization
dummy = griddata(mpoints, ml0['t'].values.flatten(), inter, method='linear')
dummy = dummy.reshape((grid.ny, grid.nx))
outl = np.full_like(dummy, np.nan)
xl, yl = grid.transform(lon1[inds], lat1[inds], crs=salem.wgs84, nearest=True, maskout=True)
outl[yl.compressed(), xl.compressed()] = dummy[yl.compressed(), xl.compressed()]
# TODO #### SHIFTING WITH RESPECT TO MIN T / MAX P - search for Pmax within 20km from Tmin, shift TRMM image
#
# tmin = np.argmin(outl)
# pmax =
#
# dist =
#
tmask = np.isfinite(outt)
mmask = np.isfinite(outl)
mask2 = np.isfinite(outl[tmask])
#last check for min area, crazy rainfall or crazy cloud size
if (sum(mmask.flatten())*25 < 350) or (outt.max()>200) or (sum(mmask.flatten())*25 > 1500000):
continue
if sum(mask2.flatten()) < 5: # Check minimum overlap between TRMM swath and MSG cloud
print('Kickout: TRMM MSG overlap less than 3pix of cloud area')
continue
print('Hit:', gi)
da = xr.Dataset({'p': (['x', 'y'], outt), # rainfall field
'pconv': (['x', 'y'], outk), # convective rainfall
't_lag0': (['x', 'y'], dummy), # full T image in cutout region
'tc_lag0': (['x', 'y'], outl), # cloud area only
},
coords={'lon': (['x', 'y'], lon),
'lat': (['x', 'y'], lat),
'time': date})
da.attrs['lag0'] = dt0 # lag in minutes between TRMM / MSG
da.attrs['meanT'] = np.mean(outl[mmask]) # cloud mean T
da.attrs['T90perc'] = mmeans # cloud 90perc T
da.attrs['meanT_cut'] = np.mean(outl[tmask][mask2]) # cloud mean T in TRMM region
da.attrs['area'] = sum(mmask.flatten()) # total cloud area
da.attrs['area_cut'] = sum(mask2) # cloud area overlapping with TRMM
da.close()
savefile = '/users/global/cornkle/MCSfiles/WA15_big_-40_15W-20E_zR/' + date.strftime('%Y-%m-%d_%H:%M:%S') + '_' + str(gi) + '.nc'
try:
os.remove(savefile)
except OSError:
pass
da.to_netcdf(path=savefile, mode='w')
print('Saved ' + savefile)
cnt = cnt + 1
print('Saved ' + str(cnt) + ' TRMM/MSG merged MCSs as netcdf.')
