def gnss_task():
sd_mounted = False
with thread_list_mutex:
thread_list[_thread.get_ident()] = 'GNSS'
# Mount SD if possible
sd = SD()
try:
os.mount(sd, '/sd')
os.listdir('/sd')
sd_mounted = True
except OSError:
pass
gnss = L76GNSS(py, timeout=5)
while True:
coord = gnss.rmc()
printt(coord)
# if sd_mounted:
# logfile = open('/sd/gnss.txt', 'a')
# logfile.write(logstring)
# logfile.close()
time.sleep(2)
def __init__(self,
spi,
reset,
dreq,
xdcs,
xcs,
sdcs=None,
mp=None,
cancb=lambda: False):
self._reset = reset
self._dreq = dreq # Data request
self._xdcs = xdcs # Data CS
self._xcs = xcs # Register CS
self._mp = mp
self._spi = spi
self._cbuf = bytearray(4) # Command buffer
self._cancb = cancb # Cancellation callback
self._slow_spi = True # Start on low baudrate
self._overrun = 0 # Recording
self.reset()
if ((sdcs is not None) and (mp is not None)):
import sdcard
import os
sd = sdcard.SDCard(spi, sdcs)
vfs = os.VfsFat(sd)
os.mount(vfs, mp)
self._spi.init(baudrate=_DATA_BAUDRATE)
def run():
# some SD cards won't work in 4-bit mode unless freq() is explicitely set
freq(240 * 1000 * 1000) # 80/160/240 MHz, faster CPU = faster SD card
#sd=SDCard(slot=3) # 1-bit mode
sd = SDCard() # 4-bit mode
mount(sd, "/sd")
print(listdir("/sd"))
f = open("/sd/long_file.bin", "rb") # any 1-10 MB long file
b = bytearray(16 * 1024)
i = 0
t1 = ticks_ms()
while f.readinto(b):
i += 1
t2 = ticks_ms()
print("%d KB in %d ms => %d KB/s file read" %
(i * len(b) // 1024, t2 - t1, 1000 * i * len(b) // 1024 //
(t2 - t1)))
f.close()
umount("/sd")
i = 0
t1 = ticks_ms()
while i < 256:
sd.readblocks(i, b)
i += 1
t2 = ticks_ms()
print("%d KB in %d ms => %d KB/s raw sector read" %
(i * len(b) // 1024, t2 - t1, 1000 * i * len(b) // 1024 //
(t2 - t1)))
sd.deinit()
def __init__(self, debug=False):
self.cfg = None
self.rtc = RTC()
self.debug = debug
self.battery = Battery()
# use this pin for debug
self.wifi_pin = Pin("GP24", mode=Pin.IN, pull=Pin.PULL_UP)
# Empty WDT object
self.wdt = None
if not debug:
if not self.wifi_pin():
self.wdt = WDT(timeout=20000)
self.sd = None
else:
from machine import SD
try:
self.sd = SD()
mount(self.sd, '/sd')
self.logfile = open("/sd/display.log", "a")
except OSError:
self.sd = None
self.logfile = None
self.epd = EPD()
self.log("Time left on the alarm: %dms" % self.rtc.alarm_left())
# Don't flash when we're awake outside of debug
heartbeat(self.debug)
def ConnectSDcardFile():
global spi, sdfile, sd
spi = SPI(sck=Pin(5), mosi=Pin(22), miso=Pin(27))
try:
sd = sdcard.SDCard(spi, Pin(23))
os.mount(sd, '/sd')
except OSError as e:
return ("SD card", str(e.args[0]))
if not sum((f[0]=="LOG") for f in os.ilistdir("sd")):
os.mkdir("sd/LOG")
fnum = 1+max((int(f[0][:3]) for f in os.ilistdir("sd/LOG") if f[3]>10), default=0)
fname = "sd/LOG/{:03d}.TXT".format(fnum)
print("Opening file", fname)
sdfile = open(fname, "w")
sdfile.write("Logfile: {}\n".format(fname))
sdfile.write("Device number: 3\n")
sdfile.write("Rt[ms]d\"[isodate]\"e[latdE]n[latdN]f[lngdE]o[lngdN] GPS cooeffs\n")
sdfile.write("Qt[ms]u[ms midnight]y[lat600000]x[lng600000]a[alt] GPS\n")
sdfile.write("Vt[ms]v[kph100]d[deg100] GPS velocity\n")
sdfile.write("Ft[ms]p[milibars] bluefly pressure\n")
sdfile.write("Gt[ms]r[rawhumid]a[rawtemp] si7021Humidity meter\n")
sdfile.write("Nt[ms]r[rawadc]s[resistance] nickel wire sensor\n")
sdfile.write("Zt[ms]xyz[linacc]abc[gravacc]wxyz[quat]s[calibstat] orient\n");
sdfile.write("Yt[ms]s\"calibconsts\" orient calib\n");
sdfile.write("\n")
sdfile.flush()
return (["SDfile", fname[:6], fname[6:]])
def mount_sd_card(self):
if not self.sd_mounted:
_logger.info("Mounting SD card")
os.mount(self.sdcard, self.SDCARD_MOUNT_POINT)
else:
_logger.debug("SD card already mounted")
self.sd_mounted = True
def wipe_microsd_card():
import ckcc, pyb
from main import dis
try:
os.umount('/sd')
except:
pass
sd = pyb.SDCard()
assert sd
if not sd.present(): return
# power cycle so card details (like size) are re-read from current card
sd.power(0)
sd.power(1)
dis.fullscreen('Part Erase...')
cutoff = 1024 # arbitrary
blk = bytearray(512)
for bnum in range(cutoff):
ckcc.rng_bytes(blk)
sd.writeblocks(bnum, blk)
dis.progress_bar_show(bnum / cutoff)
dis.fullscreen('Formating...')
# remount, with newfs option
os.mount(sd, '/sd', readonly=0, mkfs=1)
def __init__(self, rtc):
self.rtc = rtc
# Try to access the SD card and make the new path
try:
sd = SD()
os.mount(sd, '/sd')
self.sensor_file = "/sd/{0}".format(SENSOR_DATA)
print("INFO: Using SD card for data.")
except:
print("ERROR: cannot mount SD card, reverting to flash!")
self.sensor_file = SENSOR_DATA
print("Data filename = {0}".format(self.sensor_file))
# Setup the dictionary for each soil moisture sensor
adc = ADC(0)
soil_moisture1 = {
'sensor': adc.channel(pin='P13', attn=3),
'power': Pin('P19', Pin.OUT),
'location': 'Green ceramic pot on top shelf',
'num': 1,
}
soil_moisture2 = {
'sensor': adc.channel(pin='P14', attn=3),
'power': Pin('P20', Pin.OUT),
'location': 'Fern on bottom shelf',
'num': 2,
}
# Setup a list for each sensor dictionary
self.sensors = [soil_moisture1, soil_moisture2]
# Setup the alarm to read the sensors
a = Timer.Alarm(handler=self._read_sensors,
s=UPDATE_FREQ,
periodic=True)
print("Plant Monitor class is ready...")
def _try_microsd(bad_fs_ok=False):
# Power up, mount the SD card, return False if we can't for some reason.
#
# If we're about to reformat, we don't need a working filesystem
sd = pyb.SDCard()
if not sd.present():
return False
if ckcc.is_simulator():
return True
try:
# already mounted and ready?
st = os.statvfs('/sd')
return True
except OSError:
pass
try:
sd.power(1)
os.mount(sd, '/sd', readonly=0, mkfs=0)
st = os.statvfs('/sd')
return True
except OSError as exc:
# corrupt or unformated SD card (or something)
if bad_fs_ok: return True
#sys.print_exception(exc)
return False
def __init__(self,
spi=None,
cs=None,
telegramToken=None,
chatId=None,
name="unnamed"):
self.spi = spi
self.cs = cs
self.telegramToken = telegramToken
self.chatId = chatId
self.name = name
self.tgramActive = False
self.rStatusActive = False
try:
self.sd = sdcard.SDCard(spi, cs) # Compatible with PCB
self.vfs = VfsFat(self.sd)
mount(self.vfs, Logger.PARTITION)
self.initialized = True
print("SD inicializada")
except Exception as e:
print("No se pudo montar micro SD")
self.vfs = None
self.initialized = False
print_exception(e)
print(repr(e))
def mount(self):
try:
os.mount(self.sdcard, self.sd_path)
self.mounted = True
except Exception as e:
sys.print_exception(e)
print('sd mount failure')
def ConnectSDcardFile():
global sdfile
try:
os.mount(sd, '/sd')
except OSError as e:
oledshowfattext(["SD card", "failed"])
time.sleep_ms(5000)
if not sum((f[0] == "LOG") for f in os.ilistdir("sd")):
os.mkdir("sd/LOG")
fnum = 1 + max(
(int(f[0][:3]) for f in os.ilistdir("sd/LOG") if f[3] > 10), default=0)
fname = "sd/LOG/{:03d}.TXT".format(fnum)
oledshowfattext(["SDfile", fname[:6], fname[6:]])
print("Opening file", fname)
sdfile = open(fname, "w")
sdfile.write("Logfile: {}".format(fname))
sdfile.write("Device number: 3")
sdfile.write(
"Rt[ms]d\"[isodate]\"e[latdE]n[latdN]f[lngdE]o[lngdN] GPS cooeffs\n")
sdfile.write("Qt[ms]u[ms midnight]y[lat600000]x[lng600000]a[alt] GPS\n")
sdfile.write("Vt[ms]v[kph100]d[deg100] GPS velocity\n")
sdfile.write("Ft[ms]p[milibars] bluefly pressure\n")
sdfile.write("Gt[ms]r[rawhumid]a[rawtemp] si7021Humidity meter\n")
sdfile.write("Nt[ms]r[rawadc]s[resistance] nickel wire sensor\n")
sdfile.write("\n")
return sdfile
def __check_file(self, file_path, debug=False):
if 'FiPy' in self.__sysname or 'GPy' in self.__sysname:
if file_path[
0] == '/' and not 'flash' in file_path and not file_path.split(
'/')[1] in os.listdir('/'):
if self.__sdpath is None:
self.__sdpath = file_path.split('/')[1]
try:
sd = SD()
time.sleep(0.5)
os.mount(sd, '/{}'.format(self.__sdpath))
except Exception as ex:
print('Unable to mount SD card!')
return False
else:
print('SD card already mounted on {}!'.format(
self.__sdpath))
return False
try:
size = os.stat(file_path)[6]
if debug: print('File {} has size {}'.format(file_path, size))
return True
except Exception as ex:
print('Exception when checking file {}... wrong file name?'.format(
file_path))
print('{}'.format(ex))
return False
return False
def mount_sdcard():
spisd = SoftSPI(-1, miso=Pin(13), mosi=Pin(12), sck=Pin(14))
sd = SDCard(spisd, Pin(27))
vfs = os.VfsFat(sd)
os.mount(vfs, '/sd')
def mount_sdcard() -> bool:
"""Mounts SD card"""
if not is_sd_present():
raise RuntimeError("SD card is not present")
if sdcard is not None:
sdled.on()
sdcard.power(True)
os.mount(sdcard, "/sd")
def mountsd():
try:
spisd = SPI(-1, sck=Pin(14), mosi=Pin(13), miso=Pin(12))
sd = sdcard.SDCard(spisd, machine.Pin(15))
os.mount(sd, '/sd')
return 1
except:
return 0
def setup():
global logger, rtc, sd, iCAM, iACC, CTLR_IPADDRESS, logfile, filename
global wdt, ow, temp, py, sensor
gc.enable()
# HW Setup
wdt = WDT(timeout=wdt_timeout)
sd = SD()
rtc = RTC()
os.mount(sd,'/sd')
# Enable WiFi Antenna
Pin('P12', mode=Pin.OUT)(True)
# TEMPERATURE SENSORS: DS18B20 and SI7006A20
ow = OneWire(Pin('P10'))
temp = DS18X20(ow)
py = Pysense()
sensor = SI7006A20(py)
# SYSTEM VARIABLES
iCAM = pycom.nvs_get('iCAM') # pycom.nvs_set('iCAM',1)
iACC = pycom.nvs_get('iACC') # pycom.nvs_set('iACC',1)
logfile='/sd/log/{}.log'.format(datetime_string(time.time()))
logging.basicConfig(level=logging.DEBUG,filename=logfile)
logger = logging.getLogger(__name__)
# # NETWORK VARIABLES
# pbconf = pybytes.get_config()
# AP = pbconf['wifi']['ssid']
# if AP == 'wings':
# CTLR_IPADDRESS = '192.168.1.51'
# elif AP == 'RUT230_7714':
# CTLR_IPADDRESS = '192.168.1.100'
# # CONNECT TO AP
# wlan = WLAN(mode=WLAN.STA)
# while not wlan.isconnected():
# nets = wlan.scan()
# for net in nets:
# if net.ssid == 'RUT230_7714':
# pybytes.connect_wifi()
#
# wlan.ifconfig(config=('192.168.1.100', '255.255.255.0', '192.168.1.1', '8.8.8.8'))
# wlan.connect('RUT230_7714', auth=(WLAN.WPA2, 'Ei09UrDg'), timeout=5000)
# while not wlan.isconnected():
# machine.idle() # save power while waiting
socket_client.CTLR_IPADDRESS = CTLR_IPADDRESS
# GREETING
logger.info('--------------------')
logger.info(' Starting CAM{}-ACC{}'.format(iCAM, iACC))
logger.info('--------------------')
logger.info('AP={}'.format(AP))
gc.collect()
return
def sdtest2():
spi = machine.SPI(1)
spi.init() # Ensure right baudrate
sd = sdcard.SDCard(spi, machine.Pin(15)) # Compatible with PCB
# vfs = os.VfsLfs2(sd)
vfs = os.VfsFat(sd)
os.mount(vfs, "/fc")
print("Filesystem check")
print(os.listdir("/fc"))
line = "abcdefghijklmnopqrstuvwxyz\n"
lines = line * 200 # 5400 chars
short = "1234567890\n"
fn = "/fc/rats.txt"
print()
print("Multiple block read/write")
with open(fn, "w") as f:
n = f.write(lines)
print(n, "bytes written")
n = f.write(short)
print(n, "bytes written")
n = f.write(lines)
print(n, "bytes written")
with open(fn, "r") as f:
result1 = f.read()
print(len(result1), "bytes read")
fn = "/fc/rats1.txt"
print()
print("Single block read/write")
with open(fn, "w") as f:
n = f.write(short) # one block
print(n, "bytes written")
with open(fn, "r") as f:
result2 = f.read()
print(len(result2), "bytes read")
os.umount("/fc")
print()
print("Verifying data read back")
success = True
if result1 == "".join((lines, short, lines)):
print("Large file Pass")
else:
print("Large file Fail")
success = False
if result2 == short:
print("Small file Pass")
else:
print("Small file Fail")
success = False
print()
print("Tests", "passed" if success else "failed")
def quick_test_hw(hw):
_logger.info("Starting quick self test...")
pycom_util.reset_rgbled()
_logger.info("Starting hardware quick check")
chrono = machine.Timer.Chrono()
chrono.start()
with CheckStep(FLAG_MOSFET_PIN, suppress_exception=True):
if hw.mosfet_pin:
_logger.info("Mosfet pin state: %s", hw.mosfet_pin())
wdt.feed()
with CheckStep(FLAG_SD_CARD, suppress_exception=True):
import os
mountpoint = "/co2_sd_card_test"
os.mount(hw.sdcard, mountpoint)
contents = os.listdir(mountpoint)
os.umount(mountpoint)
_logger.info("SD card OK. Contents: %s", contents)
wdt.feed()
with CheckStep(FLAG_ERTC, suppress_exception=True):
ertc = hw.ertc
time_tuple = ertc.get_time()
_logger.info("External RTC ok. Current time: %s", time_tuple)
wdt.feed()
with CheckStep(FLAG_CO2, suppress_exception=True):
import explorir
co2 = hw.co2
co2.set_mode(explorir.MODE_POLLING)
reading = co2.read_co2()
_logger.info("CO2 sensor ok. Current level: %d ppm", reading)
wdt.feed()
with CheckStep(FLAG_ETEMP, suppress_exception=True):
etemp = hw.etemp
_logger.debug("Starting external temp read. Can take up to 750ms.")
etemp.start_conversion()
chrono.reset()
while True:
reading = etemp.read_temp_async()
if reading: break
if chrono.read_ms() > 1000:
raise TimeoutError(
"Timeout reading external temp sensor after %d ms" %
chrono.read_ms())
_logger.info("External temp sensor ok. Current temp: %s C", reading)
wdt.feed()
show_boot_flags()
_logger.info("Failures after quick hardware check: 0x%04x", failures)
display_errors_led()
wdt.feed()
pycom.rgbled(0x0)
def init_sd_card():
# First we would like to bount the SD card
try:
spibus = SPI(1, sck=Pin(18), mosi=Pin(23), miso=Pin(19))
sd = sdcard.SDCard(spibus, Pin(4)) # <- chipselect 4 on WEMOS D32 Pro
os.mount(sd, SD_ROOT)
except:
failure()
def sdtest():
spi = machine.SPI(1)
spi.init() # Ensure right baudrate
sd = sdcard.SDCard(spi, machine.Pin.board.X21) # Compatible with PCB
vfs = os.VfsFat(sd)
os.mount(vfs, '/fc')
print('Filesystem check')
print(os.listdir('/fc'))
line = 'abcdefghijklmnopqrstuvwxyz\n'
lines = line * 200 # 5400 chars
short = '1234567890\n'
fn = '/fc/rats.txt'
print()
print('Multiple block read/write')
with open(fn,'w') as f:
n = f.write(lines)
print(n, 'bytes written')
n = f.write(short)
print(n, 'bytes written')
n = f.write(lines)
print(n, 'bytes written')
with open(fn,'r') as f:
result1 = f.read()
print(len(result1), 'bytes read')
fn = '/fc/rats1.txt'
print()
print('Single block read/write')
with open(fn,'w') as f:
n = f.write(short) # one block
print(n, 'bytes written')
with open(fn,'r') as f:
result2 = f.read()
print(len(result2), 'bytes read')
os.umount('/fc')
print()
print('Verifying data read back')
success = True
if result1 == ''.join((lines, short, lines)):
print('Large file Pass')
else:
print('Large file Fail')
success = False
if result2 == short:
print('Small file Pass')
else:
print('Small file Fail')
success = False
print()
print('Tests', 'passed' if success else 'failed')
def mount(path):
"""
Mount the SD card.
"""
if path not in os.listdir("/"):
try:
os.mount(SD(), "/" + path)
except:
return False
return True
def __init__(self):
try:
os.mount(
SDCard(slot=3,
miso=Pin(12),
mosi=Pin(13),
sck=Pin(14),
cs=Pin(15)), "/sd")
except:
print("Sd card could not be read")
def start():
# FIXME
lcd.erase()
# mount SD card to filesystem
sd = SDCard()
os.mount(sd, '/sd')
# navigate to first screen
SeedChoiceScreen().visit()
def fstest():
ram = get_spiram()
os.VfsLfs2.mkfs(ram) # Format littlefs
try:
os.mount(ram, '/ram')
except OSError: # Already mounted
pass
print('Contents of "/": {}'.format(os.listdir('/')))
print('Contents of "/ram": {}'.format(os.listdir('/ram')))
print(os.statvfs('/ram'))
def print_log(path='/sd/display.log'):
sd = SD()
os.mount(sd, '/sd')
with open(path, 'r') as logfile:
for line in logfile:
print(line, end='')
os.unmount('/sd')
sd.deinit()
def mount_microSD(self):
try:
microSD = SD()
except OSError:
return False
try:
os.mount(microSD,'/microSD')
except OSError:
return False
return True
def initialize_sd_card():
"""Try to mount SD card and append /sd/lib to sys.path"""
global sd
try:
sd = SD(pins=('GP10', 'GP11', 'GP15'))
os.mount(sd, '/sd')
sys.path.append('/sd/lib')
except OSError:
return False
else:
return True
def mount_sd():
try:
sd = machine.SD()
try: # check if sd is already mounted
os.stat('/sd')
return True
except: # not mounted: continue # todo except specific exception
pass
os.mount(sd, '/sd')
return True
except OSError:
return False
def cptest():
ram = get_spiram()
if 'ram' in os.listdir('/'):
print('Device already mounted.')
else:
os.VfsLfs2.mkfs(ram) # Format littlefs
os.mount(ram, '/ram')
print('Formatted and mounted device.')
cp('/sd/spiram_test.py', '/ram/')
cp('/sd/spiram.py', '/ram/')
print('Contents of "/ram": {}'.format(os.listdir('/ram')))
print(os.statvfs('/ram'))
def mount_sd():
logger.info("mounting sd...")
try:
sd = sdcard.SDCard(machine.SPI(1), machine.Pin(15))
os.mount(sd, "/sd")
except Exception as e:
logger.exc(e, "sd could not be mounted.")
failed_mounts_count = increment_counter("failed_mounts")
if failed_mounts_count == 1:
print_error_msg("SD-Karte konnte nicht gelesen werden! Sag besser mal Fabian bescheid!")
else:
reset_counter("failed_mounts")
def __init__(self):
self.debug('doing state init')
#load (or create) a local file
sd = SD()
os.mount(sd, '/sd')
#sigfox setup
sigfox = Sigfox(mode=Sigfox.SIGFOX, rcz=Sigfox.RCZ1)
self.sig = socket.socket(socket.AF_SIGFOX, socket.SOCK_RAW)
self.sig.setblocking(False)
self.sig.setsockopt(socket.SOL_SIGFOX, socket.SO_RX, False)
#py = Pytrack()
#self.gps = L76GNSS(py)
self.debug('trying to get state from net...')
try:
data = {}
data["order"] = '-createdAt'
data["limit"] = '1'
headers = {
'X-Parse-Application-Id': PARSE_APPLICATION_ID,
'X-Parse-REST-API-Key': PARSE_REST_API_KEY,
'Content-Type': 'application/json'
}
self.debug('sending request.')
resp = urequests.get(PARSE_BASE_URL + '/classes/ConfigObject',
headers=headers,
data=ujson.dumps(data))
config = resp.json()
resp.close()
self.debug('got state from net:')
self.debug(ujson.dumps(config))
self.write_config(config["results"][0])
except:
self.debug('could not get state from net.')
try:
f = open('/sd/config.json', 'r')
config = f.read()
f.close()
if config == '':
self.debug('found invalid local json file, writing...')
config = {}
config["state"] = 0
self.write_config(config)
else:
self.debug('found valid local json file:')
self.debug(config)
self.config = ujson.loads(config)
except:
self.debug('ERROR - could not get/create a valid config file!')
pass
def initialize_sd_card():
"""Try to mount SD card and append /sd/lib to sys.path"""
global sd
log = ulog.Logger('SD: ')
try:
log.info('preparing SD card')
sd = SD(pins=('GP10', 'GP11', 'GP15'))
os.mount(sd, '/sd')
sys.path.append('/sd/lib')
except OSError:
log.info('no card found!')
return False
else:
log.info('mounted to /sd')
return True
def save_config(cfg):
"""
Save out a configuration file
:param Config cfg: config option
:return: None
"""
sd = SD()
os.mount(sd, '/sd')
with open("/sd/config.txt", "w") as cfgfile:
cfgfile.write("Host:%s\n", cfg.host)
cfgfile.write("WiFi:%s\n", cfg.wifi_ssid)
cfgfile.write("Pass:%s\n", cfg.wifi_key)
cfgfile.write("Port:%s\n", cfg.port)
cfgfile.write("Image:%s\n", cfg.image_path)
cfgfile.write("Meta:%s\n", cfg.metadata_path)
if cfg.upload_path:
cfgfile.write("Up:%s\n", cfg.upload_path)
os.unmount(sd)
sd.deinit()
def load(debug=False, sd=None):
"""
Load off SD our AP, pw, and URL details
:param debug: Logging
:param sd: SD object if mounted already
:return: Config object
"""
from machine import SD
cfg = None
try:
unmount = False
if sd is None:
sd = SD()
os.mount(sd, '/sd')
unmount = True
cfg = Config.load_file(open(Config.SD_CONFIG_PATH,"r"), debug)
if unmount:
try:
os.unmount('/sd') # got renamed in upy 1.9
except AttributeError:
os.umount('/sd')
sd.deinit()
del sd
except OSError:
print("Can't open config file SD card")
if not cfg:
cfg = Config.load_file(open(Config.FLASH_CONFIG_PATH, "r"), debug)
if not cfg:
raise ValueError("No config file!")
print("Loaded from flash")
cfg.src = "flash"
else:
print("Loaded from SD card")
cfg.src = "sd"
return cfg
print
# Unpack the base yaOSp package
print
print "Installing yaOSp base package ..."
try :
os.mkdir( "/media/install" )
except OSError, e :
print "Failed to create /media/install directory!"
sys.exit(0)
try :
os.mount( partition[ "name" ], "/media/install", "ext2" )
except OSError, e :
print "Failed to mount %s to /media/install" % ( partition[ "name" ] )
sys.exit(0)
try :
base = tarfile.open( "/yaosp/yaosp_base.tar.bz2" )
except IOError, e :
print "The yaosp base package is not found!"
sys.exit(0)
print
for entry in base :
print "Extracting /media/install/%s" % ( entry.name )
base.extract( entry, "/media/install" )
def mnt():
cs = Pin("P22", mode=Pin.OUT)
sd = SDCard(SPI(0), cs)
os.mount(sd, '/')
from pyb import SD
import pyb
import os
machine = os.uname().machine
if 'LaunchPad' in machine:
sd_pins = ('GP16', 'GP17', 'GP15')
elif 'WiPy' in machine:
sd_pins = ('GP10', 'GP11', 'GP15')
else:
raise Exception('Board not supported!')
sd = SD(pins=sd_pins)
os.mount(sd, '/sd')
os.mkfs('/sd')
os.chdir('/flash')
print(os.listdir())
os.chdir('/sd')
print(os.listdir())
# create a test directory in flash
os.mkdir('/flash/test')
os.chdir('/flash/test')
print(os.getcwd())
os.chdir('..')
print(os.getcwd())
os.chdir('test')
print(os.getcwd())
def mount_tf(self, mount_point="/"):
sd = SDCard(SPI(0), Pin("P15", mode=Pin.OUT))
os.mount(sd, mount_point)