def writer(self):
"""\
Loop and copy console->serial until EXITCHARCTER character is
found. When MENUCHARACTER is found, interpret the next key
locally.
"""
menu_active = False
try:
while self.alive:
try:
b = console.getkey()
except KeyboardInterrupt:
b = serial.to_bytes([3])
c = character(b)
if menu_active:
if c == MENUCHARACTER or c == EXITCHARCTER: # Menu character again/exit char -> send itself
self.serial.write(b) # send character
if self.echo:
sys.stdout.write(c)
elif c == '\x15': # CTRL+U -> upload file
sys.stderr.write('\n--- File to upload: ')
sys.stderr.flush()
console.cleanup()
filename = sys.stdin.readline().rstrip('\r\n')
if filename:
try:
file = open(filename, 'r')
sys.stderr.write('--- Sending file %s ---\n' % filename)
while True:
line = file.readline().rstrip('\r\n')
if not line:
break
self.serial.write(line)
self.serial.write('\r\n')
# Wait for output buffer to drain.
self.serial.flush()
sys.stderr.write('.') # Progress indicator.
sys.stderr.write('\n--- File %s sent ---\n' % filename)
except IOError, e:
sys.stderr.write('--- ERROR opening file %s: %s ---\n' % (filename, e))
console.setup()
elif c in '\x08hH?': # CTRL+H, h, H, ? -> Show help
sys.stderr.write(get_help_text())
elif c == '\x12': # CTRL+R -> Toggle RTS
self.rts_state = not self.rts_state
self.serial.setRTS(self.rts_state)
sys.stderr.write('--- RTS %s ---\n' % (self.rts_state and 'active' or 'inactive'))
elif c == '\x04': # CTRL+D -> Toggle DTR
self.dtr_state = not self.dtr_state
self.serial.setDTR(self.dtr_state)
sys.stderr.write('--- DTR %s ---\n' % (self.dtr_state and 'active' or 'inactive'))
elif c == '\x02': # CTRL+B -> toggle BREAK condition
self.break_state = not self.break_state
self.serial.setBreak(self.break_state)
sys.stderr.write('--- BREAK %s ---\n' % (self.break_state and 'active' or 'inactive'))
elif c == '\x05': # CTRL+E -> toggle local echo
self.echo = not self.echo
sys.stderr.write('--- local echo %s ---\n' % (self.echo and 'active' or 'inactive'))
elif c == '\x09': # CTRL+I -> info
self.dump_port_settings()
elif c == '\x01': # CTRL+A -> cycle escape mode
self.repr_mode += 1
if self.repr_mode > 3:
self.repr_mode = 0
sys.stderr.write('--- escape data: %s ---\n' % (
REPR_MODES[self.repr_mode],
))
elif c == '\x0c': # CTRL+L -> cycle linefeed mode
self.convert_outgoing += 1
if self.convert_outgoing > 2:
self.convert_outgoing = 0
self.newline = NEWLINE_CONVERISON_MAP[self.convert_outgoing]
sys.stderr.write('--- line feed %s ---\n' % (
LF_MODES[self.convert_outgoing],
))
elif c in 'pP': # P -> change port
dump_port_list()
sys.stderr.write('--- Enter port name: ')
sys.stderr.flush()
console.cleanup()
try:
port = sys.stdin.readline().strip()
except KeyboardInterrupt:
port = None
console.setup()
if port and port != self.serial.port:
# reader thread needs to be shut down
self._stop_reader()
# save settings
settings = self.serial.getSettingsDict()
try:
try:
new_serial = serial.serial_for_url(port, do_not_open=True)
except AttributeError:
# happens when the installed pyserial is older than 2.5. use the
# Serial class directly then.
new_serial = serial.Serial()
new_serial.port = port
# restore settings and open
new_serial.applySettingsDict(settings)
new_serial.open()
new_serial.setRTS(self.rts_state)
new_serial.setDTR(self.dtr_state)
new_serial.setBreak(self.break_state)
except Exception, e:
sys.stderr.write('--- ERROR opening new port: %s ---\n' % (e,))
new_serial.close()
else:
self.serial.close()
self.serial = new_serial
sys.stderr.write('--- Port changed to: %s ---\n' % (self.serial.port,))
# and restart the reader thread
self._start_reader()
elif c in 'bB': # B -> change baudrate
sys.stderr.write('\n--- Baudrate: ')
sys.stderr.flush()
console.cleanup()
backup = self.serial.baudrate
try:
self.serial.baudrate = int(sys.stdin.readline().strip())
except ValueError, e:
sys.stderr.write('--- ERROR setting baudrate: %s ---\n' % (e,))
self.serial.baudrate = backup
else:
def writer(self):
"""\
Loop and copy console->serial until EXITCHARCTER character is
found. When MENUCHARACTER is found, interpret the next key
locally.
"""
menu_active = False
try:
while self.alive:
try:
b = console.getkey()
except KeyboardInterrupt:
b = serial.to_bytes([3])
c = character(b)
if menu_active:
if c == MENUCHARACTER or c == EXITCHARCTER: # Menu character again/exit char -> send itself
self.serial.write(b) # send character
if self.echo:
sys.stdout.write(c)
elif c == '\x15': # CTRL+U -> upload file
sys.stderr.write('\n--- File to upload: ')
sys.stderr.flush()
console.cleanup()
filename = sys.stdin.readline().rstrip('\r\n')
if filename:
try:
file = open(filename, 'r')
sys.stderr.write('--- Sending file %s ---\n' %
filename)
while True:
line = file.readline().rstrip('\r\n')
if not line:
break
self.serial.write(line)
self.serial.write('\r\n')
# Wait for output buffer to drain.
self.serial.flush()
sys.stderr.write(
'.') # Progress indicator.
sys.stderr.write('\n--- File %s sent ---\n' %
filename)
except IOError, e:
sys.stderr.write(
'--- ERROR opening file %s: %s ---\n' %
(filename, e))
console.setup()
elif c in '\x08hH?': # CTRL+H, h, H, ? -> Show help
sys.stderr.write(get_help_text())
elif c == '\x12': # CTRL+R -> Toggle RTS
self.rts_state = not self.rts_state
self.serial.setRTS(self.rts_state)
sys.stderr.write(
'--- RTS %s ---\n' %
(self.rts_state and 'active' or 'inactive'))
elif c == '\x04': # CTRL+D -> Toggle DTR
self.dtr_state = not self.dtr_state
self.serial.setDTR(self.dtr_state)
sys.stderr.write(
'--- DTR %s ---\n' %
(self.dtr_state and 'active' or 'inactive'))
elif c == '\x02': # CTRL+B -> toggle BREAK condition
self.break_state = not self.break_state
self.serial.setBreak(self.break_state)
sys.stderr.write(
'--- BREAK %s ---\n' %
(self.break_state and 'active' or 'inactive'))
elif c == '\x05': # CTRL+E -> toggle local echo
self.echo = not self.echo
sys.stderr.write(
'--- local echo %s ---\n' %
(self.echo and 'active' or 'inactive'))
elif c == '\x09': # CTRL+I -> info
self.dump_port_settings()
elif c == '\x01': # CTRL+A -> cycle escape mode
self.repr_mode += 1
if self.repr_mode > 3:
self.repr_mode = 0
sys.stderr.write('--- escape data: %s ---\n' %
(REPR_MODES[self.repr_mode], ))
elif c == '\x0c': # CTRL+L -> cycle linefeed mode
self.convert_outgoing += 1
if self.convert_outgoing > 2:
self.convert_outgoing = 0
self.newline = NEWLINE_CONVERISON_MAP[
self.convert_outgoing]
sys.stderr.write('--- line feed %s ---\n' %
(LF_MODES[self.convert_outgoing], ))
elif c in 'pP': # P -> change port
dump_port_list()
sys.stderr.write('--- Enter port name: ')
sys.stderr.flush()
console.cleanup()
try:
port = sys.stdin.readline().strip()
except KeyboardInterrupt:
port = None
console.setup()
if port and port != self.serial.port:
# reader thread needs to be shut down
self._stop_reader()
# save settings
settings = self.serial.getSettingsDict()
try:
try:
new_serial = serial.serial_for_url(
port, do_not_open=True)
except AttributeError:
# happens when the installed pyserial is older than 2.5. use the
# Serial class directly then.
new_serial = serial.Serial()
new_serial.port = port
# restore settings and open
new_serial.applySettingsDict(settings)
new_serial.open()
new_serial.setRTS(self.rts_state)
new_serial.setDTR(self.dtr_state)
new_serial.setBreak(self.break_state)
except Exception, e:
sys.stderr.write(
'--- ERROR opening new port: %s ---\n' %
(e, ))
new_serial.close()
else:
self.serial.close()
self.serial = new_serial
sys.stderr.write(
'--- Port changed to: %s ---\n' %
(self.serial.port, ))
# and restart the reader thread
self._start_reader()
elif c in 'bB': # B -> change baudrate
sys.stderr.write('\n--- Baudrate: ')
sys.stderr.flush()
console.cleanup()
backup = self.serial.baudrate
try:
self.serial.baudrate = int(
sys.stdin.readline().strip())
except ValueError, e:
sys.stderr.write(
'--- ERROR setting baudrate: %s ---\n' % (e, ))
self.serial.baudrate = backup
else:
# FTDITerm, a terminal for the FTDI direct driver.
# (C)2015 Ian Hartwig <ihartwig@github>
# Built on top of miniterm.py:
# Very simple serial terminal
# (C)2002-2011 Chris Liechti <*****@*****.**>
# Input characters are sent directly (only LF -> CR/LF/CRLF translation is
# done), received characters are displayed as is (or escaped trough pythons
# repr, useful for debug purposes)
import sys, os, threading
import pyserial_glue as serial
EXITCHARCTER = serial.to_bytes([0x1d]) # GS/CTRL+]
MENUCHARACTER = serial.to_bytes([0x14]) # Menu: CTRL+T
DEFAULT_PORT = None
DEFAULT_BAUDRATE = 9600
DEFAULT_RTS = None
DEFAULT_DTR = None
def key_description(character):
"""generate a readable description for a key"""
ascii_code = ord(character)
if ascii_code < 32:
return 'Ctrl+%c' % (ord('@') + ascii_code)
else:
return repr(character)
# FTDITerm, a terminal for the FTDI direct driver.
# (C)2015 Ian Hartwig <ihartwig@github>
# Built on top of miniterm.py:
# Very simple serial terminal
# (C)2002-2011 Chris Liechti <*****@*****.**>
# Input characters are sent directly (only LF -> CR/LF/CRLF translation is
# done), received characters are displayed as is (or escaped trough pythons
# repr, useful for debug purposes)
import sys, os, threading
import pyserial_glue as serial
EXITCHARCTER = serial.to_bytes([0x1d]) # GS/CTRL+]
MENUCHARACTER = serial.to_bytes([0x14]) # Menu: CTRL+T
DEFAULT_PORT = None
DEFAULT_BAUDRATE = 9600
DEFAULT_RTS = None
DEFAULT_DTR = None
def key_description(character):
"""generate a readable description for a key"""
ascii_code = ord(character)
if ascii_code < 32:
return 'Ctrl+%c' % (ord('@') + ascii_code)
else:
return repr(character)
