def gui_it(click_func, style="qdarkstyle", **argvs) -> None:
"""
Parameters
----------
click_func
`new_thread` is used for qt-based func, like matplotlib
"""
global _gstyle
_gstyle = GStyle(style)
# Need to ensure plugins work on systems w. no Qt5 installed:
# os.environ['QT_QPA_PLATFORM_PLUGIN_PATH'] = "." # Or rather: 'resource_path(".")' ???
# app_path = os.path.abspath(__file__)
app_path = resource_path(".")
app_plugin_path = os.path.join(app_path, "plugins")
os.environ['QT_QPA_PLATFORM_PLUGIN_PATH'] = app_path
# QtWidgets.QApplication.addLibraryPath(os.path.join(pyqt, "plugins"))
app = QtWidgets.QApplication(sys.argv)
# app_path = app.applicationDirPath() # Won't work! Points to local 'python.exe' ... :-(
app.addLibraryPath(app_path)
app.addLibraryPath(app_plugin_path)
print(f"Using '{app_plugin_path}" ' as plugin PATH ...')
print(app.libraryPaths()) # For DEBUG only!
print(f"Running application '{app_path}' ...")
app.setStyleSheet(_gstyle.stylesheet)
# set the default value for argvs
argvs["run_exit"] = argvs.get("run_exit", False)
argvs["new_thread"] = argvs.get("new_thread", False)
ex = App(click_func, **argvs)
sys.exit(app.exec_())
def vv_fram_erase(cleanup=True, verbose=True, debug=False):
"""
Erase FRAM on irrigation-sensor target (VV).
Note that erase-application START-address is NOT equal to RAM-startaddr!
Instead, the 'ResetISR' symbol is located 212 bytes ABOVE the vector table, at addr=0x1FFFE0D4.
"""
FRAM_ERASE_JLINK_CMD_FILE = "FRAM_erase.tmp.jlink"
FRAM_ERASE_APP_SREC = resource_path("VV_FRAM_eraser.srec") # TODO: must have a separate, K32L-specific application(=SREC) in order to erase FRAM on 'AB'-type!!
FRAM_ERASE_APP_START_ADDR = 0x1FFFE0D4 # NOTE: location of '.init' symbol read from .MAP-file --> app loaded in SRAM!
#
with open(FRAM_ERASE_JLINK_CMD_FILE, 'w') as fp:
fp.write("halt\n")
fp.write("r\n")
fp.write(f"loadfile {FRAM_ERASE_APP_SREC}\n")
fp.write(f"setpc {hex(FRAM_ERASE_APP_START_ADDR)}\n")
fp.write("g\n")
fp.write("sleep 6000\n") # Must ensure we sleep at least 5sec to allow erase-app to run to finish!
fp.write("q\n")
# Need to sleep at least 5sec to allow FRAM-erase process to complete.
# TODO: check when erase-app has finished blanking FRAM!
# (but, tricky without serial port connection ...)
# TODO: also determine end result of FRAM-erase (PASS or FAIL)!
cmd_status, jlink_output = run_jlink_cmd_file(FRAM_ERASE_JLINK_CMD_FILE)
# Remove file if specified:
if cleanup:
try:
os.remove(FRAM_ERASE_JLINK_CMD_FILE)
except OSError:
pass
#
return cmd_status, jlink_output
def run_jlink_cmd_file(cmd_file_name, verbose=True):
SUBPROC_RETVAL_STATUS_SUCCESS = 0
status = False
#
cmd_with_args = []
cmd_with_args.append(resource_path(JLINK_EXE_FILE))
cmd_with_args.extend(JLINK_TARGET_OPTIONS)
cmd_with_args.append(cmd_file_name)
#
print("Running: " + str(cmd_with_args))
try:
# if sys.plaform == 'win32':
if os.name != 'posix':
startup_info = subprocess.STARTUPINFO()
startup_info.dwFlags = subprocess.CREATE_NEW_CONSOLE | subprocess.STARTF_USESHOWWINDOW
startup_info.wShowWindow = subprocess.SW_HIDE
#
p1 = subprocess.Popen(cmd_with_args,
shell=False,
stdin=subprocess.DEVNULL,
stdout=subprocess.PIPE,
stderr=subprocess.PIPE,
startupinfo=startup_info)
else:
p1 = subprocess.Popen(cmd_with_args,
shell=False,
stdin=subprocess.DEVNULL,
stdout=subprocess.PIPE,
stderr=subprocess.PIPE)
# Run the command
output = p1.communicate(timeout=30)[0]
except subprocess.TimeoutExpired:
print("ERROR: timeout from running J-Link!")
return status, None
lines = output.splitlines()
lines_out = []
for line in lines:
line_str = line.decode('latin1', 'ignore')
lines_out.append(line_str)
if verbose:
print(line_str)
# Check for J-Link NOT connected, or connection problems:
if line_str.startswith("Cannot connect to target") or line_str.startswith("Connecting to J-Link via USB...FAILED"):
return status, lines_out
# Check for WRITE-errors:
if line_str.startswith("Could not write"):
return status, lines_out
# Check for 'Error'/'ERROR' in output:
if line_str.find('Error') > 0 or line_str.find('ERROR') > 0:
return status, lines_out
# Check for 'Error'/'ERROR' in output:
if line_str.find('Error') > 0 or line_str.find('ERROR') > 0:
return status, lines_out
# If 'normal' output - or NO output at all - the return value is used to decide 'status':
status = (p1.returncode == SUBPROC_RETVAL_STATUS_SUCCESS)
#
return status, lines_out
def generate_cmd_button(self,
label,
cmd_slot,
tooltip: str = "",
icon_name: str = ""):
button = QtWidgets.QPushButton(label)
button.setToolTip(tooltip)
if icon_name != "":
if icon_name.startswith('SP_'):
button.setIcon(button.style().standardIcon(
getattr(QtWidgets.QStyle, icon_name)))
else:
try:
button.setIcon(QtGui.QIcon(resource_path(icon_name)))
except Exception:
pass
button.clicked.connect(self.clean_sysargv)
button.clicked.connect(self.add_sysargv)
button.clicked.connect(cmd_slot)
return button
def run_jlink_cmd_file(cmd_file_name, verbose=True):
SUBPROC_RETVAL_STATUS_SUCCESS = 0
status = False
#
cmd_with_args = []
cmd_with_args.append(resource_path(JLINK_EXE_FILE))
cmd_with_args.extend(JLINK_TARGET_OPTIONS)
cmd_with_args.append(cmd_file_name)
#
print("Running: " + str(cmd_with_args))
try:
startup_info = subprocess.STARTUPINFO()
startup_info.dwFlags = subprocess.CREATE_NEW_CONSOLE | subprocess.STARTF_USESHOWWINDOW
startup_info.wShowWindow = subprocess.SW_HIDE
#
p1 = subprocess.Popen(cmd_with_args,
shell=False,
stdin=subprocess.DEVNULL,
stdout=subprocess.PIPE,
stderr=subprocess.PIPE,
startupinfo=startup_info)
# Run the command
output = p1.communicate(timeout=30)[0]
except subprocess.TimeoutExpired:
print("ERROR: timeout from running J-Link!")
return status
lines = output.splitlines()
lines_out = []
for line in lines:
line_str = line.decode('latin1', 'ignore')
lines_out.append(line_str)
if verbose:
print(line_str)
status = (p1.returncode == SUBPROC_RETVAL_STATUS_SUCCESS)
#
return status, lines_out
print("================================")
#
if total_status:
print("PASS: successful programming.")
else:
print("FAIL: programming error!!")
print("================================")
print("")
#
print("Completed FW-programming.")
#
return total_status
# ***************** MAIN ************************
if __name__ == "__main__":
prog_func = run_irrigation_sensor_programming
prog_func.__setattr__("name", f"Irrigation Sensor Programming Tool ver.{VER_MAJOR}.{VER_MINOR}.{VER_SUBMINOR}")
quick.gui_it(prog_func,
run_exit=False,
new_thread=False,
style="qdarkstyle",
output="gui",
width=650,
height=750,
left=100,
top=100,
app_icon=resource_path("7sense-7-hvit.png"))