def generateCode(self):
feed_rate, safe_Z, max_cut_per_pass, bit_diameter, stock_thickness = self.setup.getAllData()
self.g_code = G.startProgram(feed_rate)
self.g_code += G.bore_circle_ID(safe_Z,
stock_thickness,
max_cut_per_pass,
self.tab_thickness_var.get(),
bit_diameter,
self.doughnut_ID_var.get())
self.g_code += G.bore_tabbed_ID(safe_Z,
stock_thickness,
max_cut_per_pass,
self.tab_thickness_var.get(),
bit_diameter,
self.doughnut_ID_var.get(),
float(self.tab_width_var.get()))
self.g_code += G.bore_circle_OD(safe_Z,
stock_thickness,
max_cut_per_pass,
self.tab_thickness_var.get(),
bit_diameter,
self.doughnut_OD_var.get())
self.g_code += G.bore_tabbed_OD(safe_Z,
self.tab_thickness_var.get(),
max_cut_per_pass,
self.tab_thickness_var.get(),
bit_diameter,
self.doughnut_OD_var.get(),
float(self.tab_width_var.get()))
self.g_code += G.endProgram()
return self.g_code
def generateCode(self):
feed_rate, safe_Z, max_cut_per_pass, bit_diameter, stock_thickness = self.setup.getAllData(
)
self.g_code = G.startProgram(feed_rate)
self.g_code += G.bore_circle_ID(safe_Z, stock_thickness,
max_cut_per_pass,
self.tab_thickness_var.get(),
bit_diameter,
self.doughnut_ID_var.get())
self.g_code += G.bore_tabbed_ID(safe_Z, stock_thickness,
max_cut_per_pass,
self.tab_thickness_var.get(),
bit_diameter,
self.doughnut_ID_var.get(),
float(self.tab_width_var.get()))
self.g_code += G.bore_circle_OD(safe_Z, stock_thickness,
max_cut_per_pass,
self.tab_thickness_var.get(),
bit_diameter,
self.doughnut_OD_var.get())
self.g_code += G.bore_tabbed_OD(safe_Z, self.tab_thickness_var.get(),
max_cut_per_pass,
self.tab_thickness_var.get(),
bit_diameter,
self.doughnut_OD_var.get(),
float(self.tab_width_var.get()))
self.g_code += G.endProgram()
return self.g_code
def full_doughnut(self):
g_code = sg.startProgram(1000)
g_code += sg.bore_circle_ID(40, 4.5, 3, 1.5, 4.763, 118)
g_code += sg.bore_tabbed_ID(40, 1.5, 3, 1.5, 4.763, 118, 6.35)
g_code += sg.bore_circle_OD(40, 4.5, 3, 1.5, 4.763, 150)
g_code += sg.bore_tabbed_OD(40, 1.5, 3, 1.5, 4.763, 150, 6.35)
g_code += sg.endProgram()
match = self.proven_doughnut()
self.assertEqual(g_code, match, "not a match")
def full_doughnut(self):
g_code = sg.startProgram(1000)
g_code += sg.bore_circle_ID(40, 4.5, 3, 1.5, 4.763, 118)
g_code += sg.bore_tabbed_ID(40, 1.5, 3, 1.5, 4.763, 118, 6.35)
g_code += sg.bore_circle_OD(40, 4.5, 3, 1.5, 4.763, 150)
g_code += sg.bore_tabbed_OD(40, 1.5, 3, 1.5, 4.763, 150, 6.35)
g_code += sg.endProgram()
match = self.proven_doughnut()
self.assertEqual(g_code, match, "not a match")
def tabbed_bore_OD_equal_ID(self):
g_code_ID = sg.bore_tabbed_ID(100, 11.3, 3, 1.1, 2.5, 55, 6.35)
g_code_OD = sg.bore_tabbed_OD(100, 11.3, 3, 1.1, 2.5, 50, 6.35)
self.assertEqual(g_code_ID, g_code_OD, "not a match")
def tabbed_bore_OD_equal_ID(self):
g_code_ID = sg.bore_tabbed_ID(100, 11.3, 3, 1.1, 2.5, 55, 6.35)
g_code_OD = sg.bore_tabbed_OD(100, 11.3, 3, 1.1, 2.5, 50, 6.35)
self.assertEqual(g_code_ID, g_code_OD, "not a match")