def sprt_paulis():
"""
Just taking a look at some Paulis to see if they're being
reformatted correctly.
"""
sprt = range(5)
paulis = [sp.X([0, 2, 4]) * sp.Y([1]), sp.Z([0, 1]) * sp.X([1, 3])]
return [mw.pauli_to_tpls(pauli, sprt) for pauli in paulis]
def path_pauli(self, crd_0, crd_1, err_type):
"""
Returns a minimum-length Pauli between two ancillas, given the
type of error that joins the two.
This function is awkward, because it works implicitly on the
un-rotated surface code, first finding a "corner" (a place on
the lattice for the path to turn 90 degrees), then producing
two diagonal paths on the rotated lattice that go to and from
this corner.
"""
err_type = err_type.upper()
if self.boundary_conditions == 'open':
pth_0 = [(x, crd_0[1])
for x in short_seq(crd_0[0], crd_1[0], None)]
pth_1 = [(crd_1[0], y)
for y in short_seq(crd_0[1], crd_1[1], None)]
if self.boundary_conditions == 'rotated':
mid_v = diag_intersection(crd_0, crd_1,
self.layout.ancillas.values())
pth_0, pth_1 = diag_pth(crd_0, mid_v), diag_pth(mid_v, crd_1)
elif self.boundary_conditions == 'closed':
pth_0 = [(x, crd_0[1])
for x in short_seq(crd_0[0], crd_1[0], self.dx)]
pth_1 = [(crd_1[0], y)
for y in short_seq(crd_0[1], crd_1[1], self.dy)]
#path on lattice, uses idxs
p = [self.layout.map[crd] for crd in list(pth_0) + list(pth_1)]
pl = sp.X(p) if err_type == 'X' else sp.Z(p)
return pl
def xyx_check():
"""
If BP works, than a chain consisting of X-Y-X errors will be
corrected at d = 5.
"""
layout = sc.SCLayout(5)
err = sp.X([15, 24, 33]) * sp.Z([24])
mdl = [0.9, 0.1 / 3, 0.1 / 3, 0.1 / 3]
def two_bit_bp():
"""
Reproduce Figure 2a from Poulin/Chung 2008, using the BP from
matched_weights.py.
"""
stabs = {2: sp.X([0, 1]), 3: sp.Z([0, 1])}
err = sp.X([0])
mdl = [0.9, 0.1 / 3, 0.1 / 3, 0.1 / 3]
g = mw.tanner_graph(stabs, err, mdl)
b_list = [g.node[1]['prior']] # symmetry sez: identical on both qubits
for _ in range(10):
mw.propagate_beliefs(g, 1)
b_list.append(mw.beliefs(g)[1])
return b_list
def logicals(self):
dx, dy = self.dx, self.dy
if self.top == 'rough':
x_pts = [self.map[(x, 1)] for x in range(0, 2 * dx, 2)]
z_pts = [self.map[(0, y)] for y in range(1, 2 * dy + 1, 2)]
elif self.top == 'smooth':
x_pts = [self.map[(1, y)] for y in range(0, 2 * dy, 2)]
z_pts = [self.map[(x, 0)] for x in range(1, 2 * dx + 1, 2)]
else:
raise ValueError("top type " "{} not allowed".format(self.top))
return [sp.X(x_pts), sp.Z(z_pts)]
def stabilisers(self):
"""
Sometimes it's convenient to have the stabilisers of a surface
code, especially when doing a 2d example.
"""
stab_dict = {'X': {}, 'Z': {}}
for key in stab_dict.keys():
for anc in self.ancillas[key]:
d_set = [self.map[ad(anc, shft, self.l)] for shft in TC_SHIFTS]
stab = sp.X(d_set) if key == "X" else sp.Z(d_set)
stab_dict[key][self.map[anc]] = stab
return stab_dict
def logicals(self):
x_1 = [self.map[(x, 1)] for x in _evens(self.l)]
x_2 = [self.map[(1, y)] for y in _evens(self.l)]
z_1 = [self.map[(x, 0)] for x in _odds(self.l)]
z_2 = [self.map[(0, y)] for y in _odds(self.l)]
return [sp.X(x_1), sp.X(x_2), sp.Z(z_1), sp.Z(z_2)]
# This big block of variables is meant to pre-compute a lot of the
# stuff that goes into check_to_qubit for surface codes at import-time.
g_14 = [{0}, {1}, {2}, {3}]
g_24 = [{0, 1}, {1, 2}, {2, 3}]
g_12 = [{0}, {1}]
g_22 = [{0, 1}]
_xxxx_com = list(sp.generated_group(g_14, g_24))
_zzzz_com = list(sp.generated_group(g_24, g_14))
_xx_com = list(sp.generated_group(g_12, g_22))
_zz_com = list(sp.generated_group(g_22, g_12))
_xxxx_acom = [sp.Z([0]) * p for p in sp.generated_group(g_14, g_24)]
_zzzz_acom = [sp.X([0]) * p for p in sp.generated_group(g_24, g_14)]
_xx_acom = [sp.Z([0]) * p for p in sp.generated_group(g_12, g_22)]
_zz_acom = [sp.X([0]) * p for p in sp.generated_group(g_22, g_12)]
def tpl_lst(pauli_lst, n_bits):
return [str_sprt_to_tpl(p.str_sprt_pair(), range(n_bits))
for p in pauli_lst]
_lpg_wrap = {
('XXXX', 0): tpl_lst(_xxxx_com, 4),
('XXXX', 1): tpl_lst(_xxxx_acom, 4),
('ZZZZ', 0): tpl_lst(_zzzz_com, 4),
('ZZZZ', 1): tpl_lst(_zzzz_acom, 4),
('XX', 0): tpl_lst(_xx_com, 2),
('XX', 1): tpl_lst(_xx_acom, 2),
('ZZ', 0): tpl_lst(_zz_com, 2),
