Python setup_mesh_source_test Exemples

Exemple #1

#python

import testing

setup = testing.setup_mesh_source_test("SurfacePlot")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.SurfacePlot", 8192)

Exemple #2

#python

import testing

setup = testing.setup_mesh_source_test("NurbsDisk")
testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.NurbsDisk", 2)

Exemple #3

Fichier : mesh.solid.failure.py Projet : AwesomeDoesIt/k3d

#python

import k3d
import testing

setup = testing.setup_mesh_source_test("PolyDisk")
if k3d.polyhedron.is_solid(k3d.polyhedron.validate(setup.source.output_mesh, setup.source.output_mesh.primitives()[0])):
  raise Exception("Expected non-solid polyhedron")

Exemple #4

Fichier : mesh.source.NurbsCylinder.py Projet : yurivict/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsCylinder")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.NurbsCylinder", 2, ["Darwin-i386"])

Exemple #5

Fichier : mesh.source.QuadricSphere.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("QuadricSphere")


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.QuadricSphere", 1)

Exemple #6

#python

import testing

setup = testing.setup_mesh_source_test("PolyIcosahedron")
testing.mesh_comparison_to_reference(setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolyIcosahedron", 1)

Exemple #7

#python

import testing

setup = testing.setup_mesh_source_test("Paraboloid")

testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.Paraboloid", 1)

Exemple #8

Fichier : mesh.source.QuadricCylinder.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("QuadricCylinder")


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.QuadricCylinder", 1)

Exemple #9

Fichier : mesh.source.NurbsHyperboloid.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsHyperboloid")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsHyperboloid", 1, ["Darwin-i386"])

Exemple #10

Fichier : mesh.source.NurbsDisk.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsDisk")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsDisk", 2, ["Darwin-i386"])

Exemple #11

Fichier : mesh.source.PolyText.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("PolyText")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolyText", 3, ["Darwin-i386"])

Exemple #12

Fichier : mesh.source.LSystemParser.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("LSystemParser")
setup.source.growth = 2

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.LSystemParser", 1)

Exemple #13

Fichier : mesh.source.QuadricDisk.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("QuadricDisk")


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.QuadricDisk", 1)

Exemple #14

Fichier : mesh.source.NurbsCurve.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsCurve")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsCurve", 2)

Exemple #15

Fichier : mesh.source.NurbsTorus.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsTorus")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsTorus", 3, ["Darwin-i386"])

Exemple #16

Fichier : mesh.source.QuadricTorus.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("QuadricTorus")


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.QuadricTorus", 1)

Exemple #17

#python

import testing

setup = testing.setup_mesh_source_test("NurbsPolygon")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.NurbsPolygon", 1, ["Darwin-i386"])

Exemple #18

#python

import testing

setup = testing.setup_mesh_source_test("QuadricParaboloid")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.QuadricParaboloid", 1)

Exemple #19

Fichier : mesh.source.QuadricCone.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("QuadricCone")


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.QuadricCone", 1)

Exemple #20

Fichier : mesh.source.BlobbySegment.py Projet : GarysRefererence2014/k3d

# python

import testing

setup = testing.setup_mesh_source_test("BlobbySegment")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.BlobbySegment", 2)

Exemple #21

Fichier : source.UniformPolyhedron.py Projet : yurivict/k3d

#python

import testing

setup = testing.setup_mesh_source_test("UniformPolyhedron")
setup.source.type = "small_stellated_dodecahedron"
setup.source.size = 5

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "source.UniformPolyhedron", 1)

Exemple #22

Fichier : mesh.source.NurbsPolygon.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsPolygon")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsPolygon", 1, ["Darwin-i386"])

Exemple #23

Fichier : mesh.source.BlobbySegment.py Projet : yurivict/k3d

#python

import testing

setup = testing.setup_mesh_source_test("BlobbySegment")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.BlobbySegment", 2)

Exemple #24

Fichier : mesh.source.PolyCube.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("PolyCube")


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolyCube", 1)

Exemple #25

#python

import k3d
import testing

setup = testing.setup_mesh_source_test("PolyCube")
if not k3d.polyhedron.is_solid(
        k3d.polyhedron.validate(setup.source.output_mesh,
                                setup.source.output_mesh.primitives()[0])):
    raise Exception("Expected solid polyhedron")

Exemple #26

Fichier : mesh.source.PolyCylinder.py Projet : GarysRefererence2014/k3d

# python

import testing

setup = testing.setup_mesh_source_test("PolyCylinder")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(
    setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolyCylinder", 2, ["Darwin-i386"]
)

Exemple #27

#python

import testing

setup = testing.setup_mesh_source_test("PolyTorus")
testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.PolyTorus", 1)

Exemple #28

#python

import testing

setup = testing.setup_mesh_source_test("Cone")

testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.Cone", 1)

Exemple #29

Fichier : mesh.source.CUDAPolyGridAndTransformPoints.py Projet : AwesomeDoesIt/k3d

#python

import k3d
import testing

setup = testing.setup_mesh_source_test("CUDAPolyGridAndTransformPoints")

setup.source.input_matrix = k3d.translate3(k3d.vector3(0, 0, 1))


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolyGridAndTransformPoints", 1)

Exemple #30

Fichier : mesh.source.NurbsParaboloid.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsParaboloid")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsParaboloid", 2, ["Darwin-i386"])

Exemple #31

#python

import testing

setup = testing.setup_mesh_source_test("NurbsHyperboloid")
testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.NurbsHyperboloid", 2)

Exemple #32

#python

import testing

setup = testing.setup_mesh_source_test("LinearLissajousCurve")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.LinearLissajousCurve", 32,
                             ["Darwin-i386"])

Exemple #33

Fichier : mesh.source.PolyTorus.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("PolyTorus")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolyTorus", 1, ["Darwin-i386"])

Exemple #34

Fichier : mesh.source.NurbsCircle.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsCircle")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsCircle", 1, ["Darwin-i386"])

Exemple #35

Fichier : mesh.source.PolySphere.1.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("PolySphere")

setup.source.type = "sphere"

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolySphere.1", 2, ["Darwin-i386"])

Exemple #36

#python

import testing

setup = testing.setup_mesh_source_test("BlobbyEllipsoid")
testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.BlobbyEllipsoid", 2)

Exemple #37

Fichier : mesh.source.Newell.teapot.py Projet : yurivict/k3d

#python

import testing

setup = testing.setup_mesh_source_test("Newell")
setup.source.type = "teapot"

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.Newell.teapot", 1)

Exemple #38

#python

import testing

setup = testing.setup_mesh_source_test("LinearKnot")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.LinearKnot", 512, ["Darwin-i386"])

Exemple #39

#python

import testing

setup = testing.setup_mesh_source_test("CUDAPolyGrid")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolyGrid", 1)

Exemple #40

#python

import testing

setup = testing.setup_mesh_source_test("Teapot")


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.Teapot", 1)

Exemple #41

#python

import testing

setup = testing.setup_mesh_source_test("NurbsTorus")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.NurbsTorus", 3, ["Darwin-i386"])

Exemple #42

Fichier : mesh.source.QuadricCylinder.py Projet : yurivict/k3d

#python

import testing

setup = testing.setup_mesh_source_test("QuadricCylinder")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.QuadricCylinder", 1)

Exemple #43

Fichier : mesh.source.PolyCushion.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("PolyCushion")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolyCushion", 1)

Exemple #44

#python

import k3d
import testing

setup = testing.setup_mesh_source_test("CUDAPolyGridAndTransformPoints")

setup.source.input_matrix = k3d.translate3(k3d.vector3(0, 0, 1))

testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.PolyGridAndTransformPoints",
                                     1)

Exemple #45

Fichier : mesh.source.SurfacePlot.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("SurfacePlot")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.SurfacePlot", 8192)

Exemple #46

Fichier : mesh.source.QuadricLogo.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("QuadricLogo")


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.QuadricLogo", 1, ["Darwin-i386"])

Exemple #47

#python

import testing

setup = testing.setup_mesh_source_test("KnotCurve")
testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.KnotCurve", 300)

Exemple #48

#python

import testing

setup = testing.setup_mesh_source_test("NurbsCircle")
testing.mesh_comparison_to_reference(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsCircle", 2)

Exemple #49

#python

import testing

setup = testing.setup_mesh_source_test("PolySphere")

setup.source.type = "sphereized_cylinder"

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.PolySphere.3", 2, ["Darwin-i386"])

Exemple #50

Fichier : source.LinearKnot.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("LinearKnot")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.LinearKnot", 512, ["Darwin-i386"])

Exemple #51

Fichier : mesh.source.Newell.teaspoon.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("Newell")
setup.source.type = "teaspoon"

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.Newell.teaspoon", 1)

Exemple #52

Fichier : mesh.source.PolyCushion.py Projet : yurivict/k3d

#python

import testing

setup = testing.setup_mesh_source_test("PolyCushion")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.PolyCushion", 1)

Exemple #53

Fichier : mesh.source.PolyDisk.py Projet : yurivict/k3d

#python

import testing

setup = testing.setup_mesh_source_test("PolyDisk")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.PolyDisk", 1, ["Darwin-i386"])

Exemple #54

#python

import testing

setup = testing.setup_mesh_source_test("PolyText")
testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.PolyText", 4)

Exemple #55

#python

import k3d
import testing

script_path = k3d.share_path() / k3d.filesystem.generic_path(
    "scripts/MeshSourceScript/cylinders.py")
script_file = file(str(script_path), "r")

setup = testing.setup_mesh_source_test("MeshSourceScript")
setup.source.script = script_file.read()

testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.MeshSourceScript.cylinders",
                                     2)

Exemple #56

#python

import testing

setup = testing.setup_mesh_source_test("NurbsCurve")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.NurbsCurve", 2)

Exemple #57

Fichier : mesh.source.MeshSourceScript.bezier_triangle_patches.py Projet : AwesomeDoesIt/k3d

#python

import k3d
import testing

script_path = k3d.share_path() / k3d.filesystem.generic_path("scripts/MeshSourceScript/bezier_triangle_patches.py")
script_file = file(str(script_path), "r")

setup = testing.setup_mesh_source_test("MeshSourceScript")
setup.source.script = script_file.read()


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.MeshSourceScript.bezier_triangle_patches", 2)

Exemple #58

Fichier : mesh.source.NurbsCylinder.py Projet : AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsCylinder")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsCylinder", 2, ["Darwin-i386"])