Exemplos de setup_mesh_source_test em Python

Exemplo n.º 1

#python

import testing

setup = testing.setup_mesh_source_test("SurfacePlot")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.SurfacePlot", 8192)

Exemplo n.º 2

#python

import testing

setup = testing.setup_mesh_source_test("NurbsDisk")
testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.NurbsDisk", 2)

Exemplo n.º 3

Arquivo: mesh.solid.failure.py Projeto: AwesomeDoesIt/k3d

#python

import k3d
import testing

setup = testing.setup_mesh_source_test("PolyDisk")
if k3d.polyhedron.is_solid(k3d.polyhedron.validate(setup.source.output_mesh, setup.source.output_mesh.primitives()[0])):
  raise Exception("Expected non-solid polyhedron")

Exemplo n.º 4

Arquivo: mesh.source.NurbsCylinder.py Projeto: yurivict/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsCylinder")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.NurbsCylinder", 2, ["Darwin-i386"])

Exemplo n.º 5

Arquivo: mesh.source.QuadricSphere.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("QuadricSphere")


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.QuadricSphere", 1)

Exemplo n.º 6

#python

import testing

setup = testing.setup_mesh_source_test("PolyIcosahedron")
testing.mesh_comparison_to_reference(setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolyIcosahedron", 1)

Exemplo n.º 7

#python

import testing

setup = testing.setup_mesh_source_test("Paraboloid")

testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.Paraboloid", 1)

Exemplo n.º 8

Arquivo: mesh.source.QuadricCylinder.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("QuadricCylinder")


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.QuadricCylinder", 1)

Exemplo n.º 9

Arquivo: mesh.source.NurbsHyperboloid.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsHyperboloid")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsHyperboloid", 1, ["Darwin-i386"])

Exemplo n.º 10

Arquivo: mesh.source.NurbsDisk.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsDisk")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsDisk", 2, ["Darwin-i386"])

Exemplo n.º 11

Arquivo: mesh.source.PolyText.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("PolyText")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolyText", 3, ["Darwin-i386"])

Exemplo n.º 12

Arquivo: mesh.source.LSystemParser.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("LSystemParser")
setup.source.growth = 2

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.LSystemParser", 1)

Exemplo n.º 13

Arquivo: mesh.source.QuadricDisk.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("QuadricDisk")


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.QuadricDisk", 1)

Exemplo n.º 14

Arquivo: mesh.source.NurbsCurve.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsCurve")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsCurve", 2)

Exemplo n.º 15

Arquivo: mesh.source.NurbsTorus.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsTorus")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsTorus", 3, ["Darwin-i386"])

Exemplo n.º 16

Arquivo: mesh.source.QuadricTorus.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("QuadricTorus")


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.QuadricTorus", 1)

Exemplo n.º 17

#python

import testing

setup = testing.setup_mesh_source_test("NurbsPolygon")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.NurbsPolygon", 1, ["Darwin-i386"])

Exemplo n.º 18

#python

import testing

setup = testing.setup_mesh_source_test("QuadricParaboloid")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.QuadricParaboloid", 1)

Exemplo n.º 19

Arquivo: mesh.source.QuadricCone.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("QuadricCone")


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.QuadricCone", 1)

Exemplo n.º 20

Arquivo: mesh.source.BlobbySegment.py Projeto: GarysRefererence2014/k3d

# python

import testing

setup = testing.setup_mesh_source_test("BlobbySegment")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.BlobbySegment", 2)

Exemplo n.º 21

Arquivo: source.UniformPolyhedron.py Projeto: yurivict/k3d

#python

import testing

setup = testing.setup_mesh_source_test("UniformPolyhedron")
setup.source.type = "small_stellated_dodecahedron"
setup.source.size = 5

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "source.UniformPolyhedron", 1)

Exemplo n.º 22

Arquivo: mesh.source.NurbsPolygon.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsPolygon")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsPolygon", 1, ["Darwin-i386"])

Exemplo n.º 23

Arquivo: mesh.source.BlobbySegment.py Projeto: yurivict/k3d

#python

import testing

setup = testing.setup_mesh_source_test("BlobbySegment")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.BlobbySegment", 2)

Exemplo n.º 24

Arquivo: mesh.source.PolyCube.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("PolyCube")


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolyCube", 1)

Exemplo n.º 25

#python

import k3d
import testing

setup = testing.setup_mesh_source_test("PolyCube")
if not k3d.polyhedron.is_solid(
        k3d.polyhedron.validate(setup.source.output_mesh,
                                setup.source.output_mesh.primitives()[0])):
    raise Exception("Expected solid polyhedron")

Exemplo n.º 26

Arquivo: mesh.source.PolyCylinder.py Projeto: GarysRefererence2014/k3d

# python

import testing

setup = testing.setup_mesh_source_test("PolyCylinder")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(
    setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolyCylinder", 2, ["Darwin-i386"]
)

Exemplo n.º 27

#python

import testing

setup = testing.setup_mesh_source_test("PolyTorus")
testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.PolyTorus", 1)

Exemplo n.º 28

#python

import testing

setup = testing.setup_mesh_source_test("Cone")

testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.Cone", 1)

Exemplo n.º 29

Arquivo: mesh.source.CUDAPolyGridAndTransformPoints.py Projeto: AwesomeDoesIt/k3d

#python

import k3d
import testing

setup = testing.setup_mesh_source_test("CUDAPolyGridAndTransformPoints")

setup.source.input_matrix = k3d.translate3(k3d.vector3(0, 0, 1))


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolyGridAndTransformPoints", 1)

Exemplo n.º 30

Arquivo: mesh.source.NurbsParaboloid.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsParaboloid")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsParaboloid", 2, ["Darwin-i386"])

Exemplo n.º 31

#python

import testing

setup = testing.setup_mesh_source_test("NurbsHyperboloid")
testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.NurbsHyperboloid", 2)

Exemplo n.º 32

#python

import testing

setup = testing.setup_mesh_source_test("LinearLissajousCurve")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.LinearLissajousCurve", 32,
                             ["Darwin-i386"])

Exemplo n.º 33

Arquivo: mesh.source.PolyTorus.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("PolyTorus")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolyTorus", 1, ["Darwin-i386"])

Exemplo n.º 34

Arquivo: mesh.source.NurbsCircle.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsCircle")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsCircle", 1, ["Darwin-i386"])

Exemplo n.º 35

Arquivo: mesh.source.PolySphere.1.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("PolySphere")

setup.source.type = "sphere"

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolySphere.1", 2, ["Darwin-i386"])

Exemplo n.º 36

#python

import testing

setup = testing.setup_mesh_source_test("BlobbyEllipsoid")
testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.BlobbyEllipsoid", 2)

Exemplo n.º 37

Arquivo: mesh.source.Newell.teapot.py Projeto: yurivict/k3d

#python

import testing

setup = testing.setup_mesh_source_test("Newell")
setup.source.type = "teapot"

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.Newell.teapot", 1)

Exemplo n.º 38

#python

import testing

setup = testing.setup_mesh_source_test("LinearKnot")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.LinearKnot", 512, ["Darwin-i386"])

Exemplo n.º 39

#python

import testing

setup = testing.setup_mesh_source_test("CUDAPolyGrid")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolyGrid", 1)

Exemplo n.º 40

#python

import testing

setup = testing.setup_mesh_source_test("Teapot")


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.Teapot", 1)

Exemplo n.º 41

#python

import testing

setup = testing.setup_mesh_source_test("NurbsTorus")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.NurbsTorus", 3, ["Darwin-i386"])

Exemplo n.º 42

Arquivo: mesh.source.QuadricCylinder.py Projeto: yurivict/k3d

#python

import testing

setup = testing.setup_mesh_source_test("QuadricCylinder")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.QuadricCylinder", 1)

Exemplo n.º 43

Arquivo: mesh.source.PolyCushion.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("PolyCushion")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.PolyCushion", 1)

Exemplo n.º 44

#python

import k3d
import testing

setup = testing.setup_mesh_source_test("CUDAPolyGridAndTransformPoints")

setup.source.input_matrix = k3d.translate3(k3d.vector3(0, 0, 1))

testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.PolyGridAndTransformPoints",
                                     1)

Exemplo n.º 45

Arquivo: mesh.source.SurfacePlot.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("SurfacePlot")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.SurfacePlot", 8192)

Exemplo n.º 46

Arquivo: mesh.source.QuadricLogo.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("QuadricLogo")


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.QuadricLogo", 1, ["Darwin-i386"])

Exemplo n.º 47

#python

import testing

setup = testing.setup_mesh_source_test("KnotCurve")
testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.KnotCurve", 300)

Exemplo n.º 48

#python

import testing

setup = testing.setup_mesh_source_test("NurbsCircle")
testing.mesh_comparison_to_reference(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsCircle", 2)

Exemplo n.º 49

#python

import testing

setup = testing.setup_mesh_source_test("PolySphere")

setup.source.type = "sphereized_cylinder"

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.PolySphere.3", 2, ["Darwin-i386"])

Exemplo n.º 50

Arquivo: source.LinearKnot.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("LinearKnot")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.LinearKnot", 512, ["Darwin-i386"])

Exemplo n.º 51

Arquivo: mesh.source.Newell.teaspoon.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("Newell")
setup.source.type = "teaspoon"

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.Newell.teaspoon", 1)

Exemplo n.º 52

Arquivo: mesh.source.PolyCushion.py Projeto: yurivict/k3d

#python

import testing

setup = testing.setup_mesh_source_test("PolyCushion")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.PolyCushion", 1)

Exemplo n.º 53

Arquivo: mesh.source.PolyDisk.py Projeto: yurivict/k3d

#python

import testing

setup = testing.setup_mesh_source_test("PolyDisk")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.PolyDisk", 1, ["Darwin-i386"])

Exemplo n.º 54

#python

import testing

setup = testing.setup_mesh_source_test("PolyText")
testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.PolyText", 4)

Exemplo n.º 55

#python

import k3d
import testing

script_path = k3d.share_path() / k3d.filesystem.generic_path(
    "scripts/MeshSourceScript/cylinders.py")
script_file = file(str(script_path), "r")

setup = testing.setup_mesh_source_test("MeshSourceScript")
setup.source.script = script_file.read()

testing.mesh_comparison_to_reference(setup.document,
                                     setup.source.get_property("output_mesh"),
                                     "mesh.source.MeshSourceScript.cylinders",
                                     2)

Exemplo n.º 56

#python

import testing

setup = testing.setup_mesh_source_test("NurbsCurve")

testing.require_valid_mesh(setup.document,
                           setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document,
                             setup.source.get_property("output_mesh"),
                             "mesh.source.NurbsCurve", 2)

Exemplo n.º 57

Arquivo: mesh.source.MeshSourceScript.bezier_triangle_patches.py Projeto: AwesomeDoesIt/k3d

#python

import k3d
import testing

script_path = k3d.share_path() / k3d.filesystem.generic_path("scripts/MeshSourceScript/bezier_triangle_patches.py")
script_file = file(str(script_path), "r")

setup = testing.setup_mesh_source_test("MeshSourceScript")
setup.source.script = script_file.read()


testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.MeshSourceScript.bezier_triangle_patches", 2)

Exemplo n.º 58

Arquivo: mesh.source.NurbsCylinder.py Projeto: AwesomeDoesIt/k3d

#python

import testing

setup = testing.setup_mesh_source_test("NurbsCylinder")

testing.require_valid_mesh(setup.document, setup.source.get_property("output_mesh"))
testing.require_similar_mesh(setup.document, setup.source.get_property("output_mesh"), "mesh.source.NurbsCylinder", 2, ["Darwin-i386"])