def erase_parameters():
'''erase parameters on test board'''
conn = Connection()
logger.info("Setting SYSID_SW_MREV to 0")
conn.test.send('param set SYSID_SW_MREV 0\n')
time.sleep(1)
logger.info("rebooting")
conn.test.send('reboot\n')
util.discard_messages(conn.testmav)
util.wait_mode(conn.testmav, IDLE_MODES, timeout=30)
logger.info("Parameters erased")
return True
def erase_parameters():
'''erase parameters on test board'''
conn = Connection()
logger.info("Setting SYSID_SW_MREV to 0")
conn.test.send('param set SYSID_SW_MREV 0\n')
time.sleep(1)
logger.info("rebooting")
conn.test.send('reboot\n')
util.discard_messages(conn.testmav)
util.wait_mode(conn.testmav, IDLE_MODES, timeout=30)
logger.info("Parameters erased")
return True
def __init__(self, ref_only=False):
util.kill_processes(['mavproxy.py', GDB])
self.reflog = StringIO()
self.testlog = StringIO()
self.ref = None
self.test = None
self.nsh = None
self.refmav = None
self.testmav = None
try:
if not ref_only:
self.nsh = nsh_console.nsh_console()
except Exception as ex:
self.close()
util.show_error('Connecting to nsh console', ex, self.testlog)
try:
self.ref = mav_reference.mav_reference(self.reflog)
except Exception as ex:
self.close()
util.show_error('Connecting to reference board1', ex, self.reflog)
try:
if not ref_only:
self.test = mav_test.mav_test(self.testlog)
except Exception as ex:
self.close()
util.show_error('Connecting to test board1', ex, self.testlog)
try:
logger.info("CONNECTING MAVLINK TO REFERENCE BOARD")
self.refmav = mavutil.mavlink_connection('127.0.0.1:14550')
util.wait_heartbeat(self.refmav, timeout=30)
util.wait_mode(self.refmav, IDLE_MODES)
except Exception as ex:
self.close()
util.show_error('Connecting to reference board2', ex, self.reflog)
try:
if not ref_only:
logger.info("CONNECTING MAVLINK TO TEST BOARD at %s" % time.ctime())
self.testmav = mavutil.mavlink_connection('127.0.0.1:14551')
util.wait_heartbeat(self.testmav, timeout=30)
logger.info("got heartbeat at %s" % time.ctime())
util.wait_mode(self.testmav, IDLE_MODES)
logger.info("Waiting for 'Ready to FLY'")
self.test.expect('Ready to FLY', timeout=20)
except Exception as ex:
self.close()
util.show_error('Connecting to test board2 at %s' % time.ctime(), ex, self.testlog)
if self.nsh is not None:
# log any extra nsh data
logger.debug("Draining nsh")
try:
self.nsh.read_nonblocking(4096, 1)
except Exception as ex:
pass
try:
if not ref_only and not ref_gyro_offset_ok(self.refmav):
self.close()
util.failure("Bad reference gyro - FAILED")
except Exception as ex:
self.close()
util.show_error('testing reference gyros', ex)
logger.info("Setting rotation level")
try:
rotate.set_rotation(self, 'level', wait=False)
except Exception as ex:
self.close()
util.show_error("unable to set safety off", ex)
def __init__(self, ref_only=False):
util.kill_processes(['mavproxy.py', GDB])
self.reflog = StringIO()
self.testlog = StringIO()
self.ref = None
self.test = None
self.nsh = None
self.refmav = None
self.testmav = None
try:
if not ref_only:
self.nsh = nsh_console.nsh_console()
except Exception as ex:
self.close()
util.show_error('Connecting to nsh console', ex, self.testlog)
try:
self.ref = mav_reference.mav_reference(self.reflog)
except Exception as ex:
self.close()
util.show_error('Connecting to reference board1', ex, self.reflog)
try:
if not ref_only:
self.test = mav_test.mav_test(self.testlog)
except Exception as ex:
self.close()
util.show_error('Connecting to test board1', ex, self.testlog)
try:
logger.info("CONNECTING MAVLINK TO REFERENCE BOARD")
self.refmav = mavutil.mavlink_connection('127.0.0.1:14550')
util.wait_heartbeat(self.refmav, timeout=30)
util.wait_mode(self.refmav, IDLE_MODES)
except Exception as ex:
self.close()
util.show_error('Connecting to reference board2', ex, self.reflog)
try:
if not ref_only:
logger.info("CONNECTING MAVLINK TO TEST BOARD")
self.testmav = mavutil.mavlink_connection('127.0.0.1:14551')
util.wait_heartbeat(self.testmav, timeout=30)
logger.info("got heartbeat")
util.wait_mode(self.testmav, IDLE_MODES)
logger.info("Waiting for 'Ready to FLY'")
self.fw_version = None
self.px4_version = None
self.nuttx_version = None
self.stm32_serial = None
ready = False
self.test.send("param fetch\n")
# log version information for later reference
while (self.fw_version is None or self.px4_version is None
or self.nuttx_version is None
or self.stm32_serial is None or not ready):
i = self.test.expect([
'APM: ([^\r\n]*Copter[^\r\n]*)\r\n',
'APM: PX4: ([0-9a-f]+) NuttX: ([0-9a-f]+)\r\n',
'APM: PX4v2 ([0-9A-F]+ [0-9A-F]+ [0-9A-F]+)\r\n',
'(Ready to FLY)'
],
timeout=20)
if i == 3:
ready = True
elif i == 0:
self.fw_version = self.test.match.group(1)
elif i == 1:
self.px4_version = self.test.match.group(1)
self.nuttx_version = self.test.match.group(2)
elif i == 2:
self.stm32_serial = self.test.match.group(1)
except Exception as ex:
self.close()
util.show_error('Connecting to test board2', ex, self.testlog)
if self.nsh is not None:
# log any extra nsh data
logger.debug("Draining nsh")
try:
self.nsh.read_nonblocking(4096, 1)
except Exception as ex:
pass
try:
if not ref_only and not ref_gyro_offset_ok(self.refmav):
self.close()
util.failure("Bad reference gyro - FAILED")
except Exception as ex:
self.close()
util.show_error('testing reference gyros', ex)
logger.info("Setting rotation level")
try:
rotate.set_rotation(self, 'level', wait=False)
except Exception as ex:
self.close()
util.show_error("unable to set safety off", ex)
def __init__(self, ref_only=False):
util.kill_processes(['mavproxy.py', GDB])
self.reflog = StringIO()
self.testlog = StringIO()
self.ref = None
self.test = None
self.nsh = None
self.refmav = None
self.testmav = None
try:
if not ref_only:
self.nsh = nsh_console.nsh_console()
except Exception as ex:
self.close()
util.show_error('Connecting to nsh console', ex, self.testlog)
try:
self.ref = mav_reference.mav_reference(self.reflog)
except Exception as ex:
self.close()
util.show_error('Connecting to reference board1', ex, self.reflog)
try:
if not ref_only:
self.test = mav_test.mav_test(self.testlog)
except Exception as ex:
self.close()
util.show_error('Connecting to test board1', ex, self.testlog)
try:
logger.info("CONNECTING MAVLINK TO REFERENCE BOARD")
self.refmav = mavutil.mavlink_connection('127.0.0.1:14550')
util.wait_heartbeat(self.refmav, timeout=30)
util.wait_mode(self.refmav, IDLE_MODES)
except Exception as ex:
self.close()
util.show_error('Connecting to reference board2', ex, self.reflog)
try:
if not ref_only:
logger.info("CONNECTING MAVLINK TO TEST BOARD")
self.testmav = mavutil.mavlink_connection('127.0.0.1:14551')
util.wait_heartbeat(self.testmav, timeout=30)
logger.info("got heartbeat")
util.wait_mode(self.testmav, IDLE_MODES)
logger.info("Waiting for 'Ready to FLY'")
self.fw_version = None
self.px4_version = None
self.nuttx_version = None
self.stm32_serial = None
ready = False
self.test.send("param fetch\n")
# log version information for later reference
while (self.fw_version is None or
self.px4_version is None or
self.nuttx_version is None or
self.stm32_serial is None or
not ready):
i = self.test.expect(['APM: ([^\r\n]*Copter[^\r\n]*)\r\n',
'APM: PX4: ([0-9a-f]+) NuttX: ([0-9a-f]+)\r\n',
'APM: PX4v2 ([0-9A-F]+ [0-9A-F]+ [0-9A-F]+)\r\n',
'(Ready to FLY)'],
timeout=20)
if i == 3:
ready = True
elif i == 0:
self.fw_version = self.test.match.group(1)
elif i == 1:
self.px4_version = self.test.match.group(1)
self.nuttx_version = self.test.match.group(2)
elif i == 2:
self.stm32_serial = self.test.match.group(1)
except Exception as ex:
self.close()
util.show_error('Connecting to test board2', ex, self.testlog)
if self.nsh is not None:
# log any extra nsh data
logger.debug("Draining nsh")
try:
self.nsh.read_nonblocking(4096, 1)
except Exception as ex:
pass
try:
if not ref_only and not ref_gyro_offset_ok(self.refmav):
self.close()
util.failure("Bad reference gyro - FAILED")
except Exception as ex:
self.close()
util.show_error('testing reference gyros', ex)
logger.info("Setting rotation level")
try:
rotate.set_rotation(self, 'level', wait=False)
except Exception as ex:
self.close()
util.show_error("unable to set safety off", ex)
