import wtf import wtf.node.ap import wtf.comm import wtf.node.sta from wtf.node import PlatformOps # path to arduino directory... must be changed IDE = "/home/jacob/dev/arduino_project/MeshableMCU/arduino-1.5.6-r2" BOARD = "gmc200_dbg" arduino_comm = wtf.comm.Serial(port="/dev/ttyUSB2", prompt="") arduino_comm.name = "arduino" arduino_comm.verbosity = 2 # make zotac-0 hostapd to check that wifi tests are working sta_ssh = wtf.comm.SSH(ipaddr="zotac-3.local") sta_ssh.name = "zotac-3" sta_ssh.verbosity = 2 ops = PlatformOps(sta_ssh) iface = wtf.node.Iface.create_iface(name="wlan0", driver="ath9k", ops=ops) sta = wtf.node.ap.Hostapd(sta_ssh, [iface], ops=ops) wtf.conf = wtf.config("arduino", comm=arduino_comm, nodes=[sta], name="arduino mc200 tests", data={'IDE': IDE, 'BOARD': BOARD})
import wtf import wtf.node.ap import wtf.comm import wtf.node.sta from wtf.node import PlatformOps # path to arduino directory... must be changed IDE = "/home/jacob/dev/arduino_project/MeshableMCU/arduino-1.5.6-r2" arduino_comm = wtf.comm.Serial(port="/dev/ttyUSB2", prompt="") arduino_comm.name = "arduino" arduino_comm.verbosity = 2 # make zotac-0 hostapd to check that wifi tests are working sta_ssh = wtf.comm.SSH(ipaddr="zotac-3.local") sta_ssh.name = "zotac-3" sta_ssh.verbosity = 2 ops = PlatformOps(sta_ssh) iface = wtf.node.Iface.create_iface(name="wlan0", driver="ath9k", ops=ops) sta = wtf.node.ap.Hostapd(sta_ssh, [iface], ops=ops) wtf.conf = wtf.config("arduino", comm=arduino_comm, nodes=[sta], name="arduino mc200 tests", data={'IDE': IDE})
import wtf.node.ap import wtf.node.sta import wtf.comm import wtf # I've got an mwl8k dev board on serial port ttyUSB4 mwl8k_comm = wtf.comm.Serial(port="/dev/ttyUSB4", prompt="[root@fedora-arm /]# ") mwl8k_comm.name = "mwl8k" mwl8k_comm.verbosity = 2 mwl8k_ap = wtf.node.ap.Hostapd(mwl8k_comm, "wlan0") # create a configuration for a nearby STA sta_ssh = wtf.comm.SSH(ipaddr="192.168.1.80") sta_ssh.name = "STA" sta_ssh.verbosity = 2 sta = wtf.node.sta.LinuxSTA(sta_ssh, "wlan0") wtf.conf = wtf.config("ap_sta", nodes=[mwl8k_ap, sta], name="mwl8k as AP")
import wtf.node.p2p import wtf.comm import wtf p1_comm = wtf.comm.MvdroidSerial(port="/dev/ttyUSB0") p1_comm.name = "mvdroid-1" p1_comm.verbosity = 2 p1 = wtf.node.p2p.Mvdroid(p1_comm) p2_comm = wtf.comm.MvdroidSerial(port="/dev/ttyUSB1") p2_comm.name = "mvdroid-2" p2_comm.verbosity = 2 p2 = wtf.node.p2p.Mvdroid(p2_comm) wtf.conf = wtf.config("mvdroid", nodes=[p1, p2], name="mvdroid p2p tests")
import wtf wtf.conf = wtf.config("tshark", nodes=[], name="TSHARK TEST")
p1_comm = wtf.comm.SSH(ipaddr="192.168.1.80") ops = wtf.node.PlatformOps(p1_comm) p1_comm.name = "NODE 1" p1_comm.verbosity = 2 p1 = wtf.node.p2p.Wpap2p(p1_comm, [wtf.node.Iface.create_iface(name="wlan0", driver="ath9k")], path="/root", ops=ops) p2_comm = wtf.comm.SSH(ipaddr="192.168.1.90") ops2 = wtf.node.PlatformOps(p2_comm) p2_comm.name = "NODE 2" p2_comm.verbosity = 2 p2 = wtf.node.p2p.Wpap2p(p2_comm, [wtf.node.Iface.create_iface(name="wlan0", driver="ath9k")], path="/root", ops=ops2) # Marvell's mvdroid p2p node, which uses wfdd, wfd_cli, and wpa_supplicant is # also supported. Create such a node like this: #p2_comm = wtf.comm.MvdroidSerial(port="/dev/ttyUSB0") #p2_comm.name = "mvdroid" #p2_comm.verbosity = 2 # NOTE: the force_driver_reload option to the Mvdroid constructor forces a full # reload of the underlying driver at node start/stop time instead of node # init/shutdown time. Currently, this option must be set to true to prevent # the state of one test influencing another test. Clearly, in a real system # you would not want to reload the drivers for each wifi-direct use case. So # this is a bug in mvdroid. Once it's fixed, we can stop using # force_driver_reload=True. #p2 = wtf.node.p2p.Mvdroid(p2_comm, force_driver_reload=True) wtf.conf = wtf.config("p2p", nodes=[p1, p2], name="wpa supplicant p2p")
import wtf.node.p2p import wtf.comm import wtf p1_comm = wtf.comm.SSH(ipaddr="192.168.1.80") p1_comm.name = "NODE 1" p1_comm.verbosity = 2 p1 = wtf.node.p2p.Wpap2p(p1_comm, "wlan0", path="/root") p2_comm = wtf.comm.SSH(ipaddr="192.168.1.90") p2_comm.name = "NODE 2" p2_comm.verbosity = 2 p2 = wtf.node.p2p.Wpap2p(p2_comm, "wlan0", path="/root") # Marvell's mvdroid p2p node, which uses wfdd, wfd_cli, and wpa_supplicant is # also supported. Create such a node like this: #p2_comm = wtf.comm.MvdroidSerial(port="/dev/ttyUSB0") #p2_comm.name = "mvdroid" #p2_comm.verbosity = 2 # NOTE: the force_driver_reload option to the Mvdroid constructor forces a full # reload of the underlying driver at node start/stop time instead of node # init/shutdown time. Currently, this option must be set to true to prevent # the state of one test influencing another test. Clearly, in a real system # you would not want to reload the drivers for each wifi-direct use case. So # this is a bug in mvdroid. Once it's fixed, we can stop using # force_driver_reload=True. #p2 = wtf.node.p2p.Mvdroid(p2_comm, force_driver_reload=True) wtf.conf = wtf.config("p2p", nodes=[p1, p2], name="wpa supplicant p2p")
# pre-configured zotac nodes for n in range(4): # comms z_ssh = wtf.comm.SSH(ipaddr="192.168.3.15" + str(n + 1)) ops = PlatformOps(z_ssh) z_ssh.name = "zotac-" + str(n) z_ssh.verbosity = 2 ifaces = [] configs = [] # iface + ip iface = wtf.node.Iface.create_iface(name="wlan0", driver=driver, ip="%s.%d" % (subnet, 10 + n), ops=ops) ifaces.append(iface) # BSS configs.append(wtf.node.mesh.MeshConf( ssid=meshid, channel=channel, htmode=htmode, iface=ifaces[0])) ifaces[-1].conf = configs[-1] z = wtf.node.mesh.MeshSTA(z_ssh, ifaces=ifaces, ops=ops) z.configs = configs zotacs.append(z) # XXX: decouple testbed description from the specific test suite wtf.conf = wtf.config("simplemesh", nodes=zotacs, name="simple two zotac mesh throughput test")
ops = PlatformOps(z_ssh) z_ssh.name = "zotac-" + str(n) z_ssh.verbosity = 2 ifaces = [] configs = [] # iface + ip iface = wtf.node.Iface.create_iface(name="wlan0", driver=driver, ip="%s.%d" % (subnet, 10 + n), ops=ops) ifaces.append(iface) # BSS configs.append( wtf.node.mesh.MeshConf(ssid=meshid, channel=channel, htmode=htmode, iface=ifaces[0])) ifaces[-1].conf = configs[-1] z = wtf.node.mesh.MeshSTA(z_ssh, ifaces=ifaces, ops=ops) z.configs = configs zotacs.append(z) # XXX: decouple testbed description from the specific test suite wtf.conf = wtf.config("simplemesh", nodes=zotacs, name="simple two zotac mesh throughput test")
# BSS configs.append( wtf.node.mesh.MeshConf(ssid=meshid, channel=channel, htmode="HT20", iface=ifaces[0])) z = wtf.node.mesh.MeshSTA(z_ssh, ifaces=ifaces) z.configs = configs zotacs.append(z) # configure your sniffer node here ssh = wtf.comm.SSH(ipaddr="10.10.10." + str(6)) ssh.name = "sniffer" ssh.verbosity = 2 ifaces = [] configs = [] ifaces.append(wtf.node.Iface(name="wlan0", driver="ath9k")) configs.append( wtf.node.mesh.MeshConf(channel=channel, htmode="HT20", iface=ifaces[0])) sniffer = wtf.node.sniffer.SnifferSTA(ssh, iface="wlan0", driver="ath9k", ifaces=ifaces) sniffer.configs = configs zotacs.append(sniffer) # XXX: decouple testbed description from the specific test suite wtf.conf = wtf.config("mcca", nodes=zotacs, name="zotac mesh")
z_ssh.verbosity = 2 # iface + ip ifaces.append(wtf.node.Iface(name="wlan0", driver="ath9k", ip="%s.%d" % (subnet, str(10 + n)))) # BSS configs.append(wtf.node.mesh.MeshConf( ssid=meshid, channel=channel, htmode="HT20", iface=ifaces[0])) z = wtf.node.mesh.MeshSTA(z_ssh, ifaces=ifaces) z.configs = configs zotacs.append(z) # configure your sniffer node here ssh = wtf.comm.SSH(ipaddr="10.10.10." + str(6)) ssh.name = "sniffer" ssh.verbosity = 2 ifaces = [] configs = [] ifaces.append(wtf.node.Iface(name="wlan0", driver="ath9k")) configs.append(wtf.node.mesh.MeshConf( channel=channel, htmode="HT20", iface=ifaces[0])) sniffer = wtf.node.sniffer.SnifferSTA( ssh, iface="wlan0", driver="ath9k", ifaces=ifaces) sniffer.configs = configs zotacs.append(sniffer) # XXX: decouple testbed description from the specific test suite wtf.conf = wtf.config("mcca", nodes=zotacs, name="zotac mesh")
import wtf.comm import wtf subnet = "192.168.34" zotacs = [] # pre-configured zotac nodes for n in range(10, 12): # comms z_ssh = wtf.comm.SSH(ipaddr="10.10.10." + str(n)) z_ssh.name = "zotac-" + str(n) z_ssh.verbosity = 2 ifaces = [] configs = [] # iface + ip ifaces.append(wtf.node.Iface(name="wlan0", driver="ath9k", ip="%s.%d" % (subnet, str(10 + n)))) # BSS configs.append(wtf.node.mesh.MeshConf(ssid="meshpoo", channel=channel, htmode="HT20", iface=ifaces[0])) z = wtf.node.mesh.MeshSTA(z_ssh, ifaces=ifaces) z.configs = configs zotacs.append(z) # XXX: decouple testbed description from the specific test suite wtf.conf = wtf.config("11aa", nodes=zotacs, name="11aa mesh")
# pre-configured zotac nodes for n in range(10, 12): # comms z_ssh = wtf.comm.SSH(ipaddr="10.10.10." + str(n)) z_ssh.name = "zotac-" + str(n) z_ssh.verbosity = 2 ifaces = [] configs = [] # iface + ip ifaces.append( wtf.node.Iface(name="wlan0", driver="ath9k", ip="%s.%d" % (subnet, str(10 + n)))) # BSS configs.append( wtf.node.mesh.MeshConf(ssid="meshpoo", channel=channel, htmode="HT20", iface=ifaces[0])) z = wtf.node.mesh.MeshSTA(z_ssh, ifaces=ifaces) z.configs = configs zotacs.append(z) # XXX: decouple testbed description from the specific test suite wtf.conf = wtf.config("11aa", nodes=zotacs, name="11aa mesh")