def addMachineExtruders(self, machine_definition: DefinitionContainerInterface, machine_id: str) -> None:
changed = False
machine_definition_id = machine_definition.getId()
if machine_id not in self._extruder_trains:
self._extruder_trains[machine_id] = { }
changed = True
container_registry = ContainerRegistry.getInstance()
if container_registry:
# Add the extruder trains that don't exist yet.
for extruder_definition in container_registry.findDefinitionContainers(machine = machine_definition_id):
position = extruder_definition.getMetaDataEntry("position", None)
if not position:
Logger.log("w", "Extruder definition %s specifies no position metadata entry.", extruder_definition.getId())
if not container_registry.findContainerStacks(machine = machine_id, position = position): # Doesn't exist yet.
self.createExtruderTrain(extruder_definition, machine_definition, position, machine_id)
changed = True
# Gets the extruder trains that we just created as well as any that still existed.
extruder_trains = container_registry.findContainerStacks(type = "extruder_train", machine = machine_id)
for extruder_train in extruder_trains:
self._extruder_trains[machine_id][extruder_train.getMetaDataEntry("position")] = extruder_train
# regardless of what the next stack is, we have to set it again, because of signal routing.
extruder_train.setNextStack(Application.getInstance().getGlobalContainerStack())
changed = True
if changed:
self.extrudersChanged.emit(machine_id)
def createGlobalStack(cls, new_stack_id: str,
definition: DefinitionContainerInterface,
variant_container, material_container,
quality_container) -> GlobalStack:
from cura.CuraApplication import CuraApplication
application = CuraApplication.getInstance()
stack = GlobalStack(new_stack_id)
stack.setDefinition(definition)
# Create user container
user_container = cls.createUserChangesContainer(new_stack_id + "_user",
definition.getId(),
new_stack_id,
is_global_stack=True)
stack.definitionChanges = cls.createDefinitionChangesContainer(
stack, new_stack_id + "_settings")
stack.variant = variant_container
stack.material = material_container
stack.quality = quality_container
stack.qualityChanges = application.empty_quality_changes_container
stack.userChanges = user_container
ContainerRegistry.getInstance().addContainer(user_container)
return stack
def addMachineExtruders(self, machine_definition: DefinitionContainerInterface, machine_id: str) -> None:
changed = False
machine_definition_id = machine_definition.getId()
if machine_id not in self._extruder_trains:
self._extruder_trains[machine_id] = { }
changed = True
container_registry = ContainerRegistry.getInstance()
if container_registry:
# Add the extruder trains that don't exist yet.
for extruder_definition in container_registry.findDefinitionContainers(machine = machine_definition_id):
position = extruder_definition.getMetaDataEntry("position", None)
if not position:
Logger.log("w", "Extruder definition %s specifies no position metadata entry.", extruder_definition.getId())
if not container_registry.findContainerStacks(machine = machine_id, position = position): # Doesn't exist yet.
self.createExtruderTrain(extruder_definition, machine_definition, position, machine_id)
changed = True
# Gets the extruder trains that we just created as well as any that still existed.
extruder_trains = container_registry.findContainerStacks(type = "extruder_train", machine = machine_id)
for extruder_train in extruder_trains:
self._extruder_trains[machine_id][extruder_train.getMetaDataEntry("position")] = extruder_train
# regardless of what the next stack is, we have to set it again, because of signal routing.
extruder_train.setNextStack(Application.getInstance().getGlobalContainerStack())
changed = True
if changed:
self.extrudersChanged.emit(machine_id)
def createGlobalStack(cls, new_stack_id: str, definition: DefinitionContainerInterface,
variant_container: "InstanceContainer",
material_container: "InstanceContainer",
quality_container: "InstanceContainer") -> GlobalStack:
from cura.CuraApplication import CuraApplication
application = CuraApplication.getInstance()
registry = application.getContainerRegistry()
stack = GlobalStack(new_stack_id)
stack.setDefinition(definition)
# Create user container
user_container = cls.createUserChangesContainer(new_stack_id + "_user", definition.getId(), new_stack_id,
is_global_stack = True)
stack.definitionChanges = cls.createDefinitionChangesContainer(stack, new_stack_id + "_settings")
stack.variant = variant_container
stack.material = material_container
stack.quality = quality_container
stack.qualityChanges = application.empty_quality_changes_container
stack.userChanges = user_container
registry.addContainer(user_container)
return stack
def createGlobalStack(cls, new_stack_id: str,
definition: DefinitionContainerInterface,
**kwargs) -> GlobalStack:
stack = GlobalStack(new_stack_id)
stack.setDefinition(definition)
user_container = InstanceContainer(new_stack_id + "_user")
user_container.addMetaDataEntry("type", "user")
user_container.addMetaDataEntry("machine", new_stack_id)
from cura.CuraApplication import CuraApplication
user_container.addMetaDataEntry("setting_version",
CuraApplication.SettingVersion)
user_container.setDefinition(definition.getId())
stack.setUserChanges(user_container)
# Important! The order here matters, because that allows the stack to
# assume the material and variant have already been set.
if "definition_changes" in kwargs:
stack.setDefinitionChangesById(kwargs["definition_changes"])
else:
stack.setDefinitionChanges(
cls.createDefinitionChangesContainer(
stack, new_stack_id + "_settings"))
if "variant" in kwargs:
stack.setVariantById(kwargs["variant"])
if "material" in kwargs:
stack.setMaterialById(kwargs["material"])
if "quality" in kwargs:
stack.setQualityById(kwargs["quality"])
if "quality_changes" in kwargs:
stack.setQualityChangesById(kwargs["quality_changes"])
registry = ContainerRegistry.getInstance()
registry.addContainer(stack)
registry.addContainer(user_container)
return stack
def createGlobalStack(
cls, new_stack_id: str, definition: DefinitionContainerInterface,
variant_container: "InstanceContainer",
material_container: "InstanceContainer",
quality_container: "InstanceContainer") -> GlobalStack:
"""Create a new Global stack
:param new_stack_id: The ID of the new stack.
:param definition: The definition to base the new stack on.
:param variant_container: The variant selected for the current stack.
:param material_container: The material selected for the current stack.
:param quality_container: The quality selected for the current stack.
:return: A new Global stack instance with the specified parameters.
"""
from cura.CuraApplication import CuraApplication
application = CuraApplication.getInstance()
registry = application.getContainerRegistry()
stack = GlobalStack(new_stack_id)
stack.setDefinition(definition)
# Create user container
user_container = cls.createUserChangesContainer(new_stack_id + "_user",
definition.getId(),
new_stack_id,
is_global_stack=True)
stack.definitionChanges = cls.createDefinitionChangesContainer(
stack, new_stack_id + "_settings")
stack.variant = variant_container
stack.material = material_container
stack.quality = quality_container
stack.intent = application.empty_intent_container
stack.qualityChanges = application.empty_quality_changes_container
stack.userChanges = user_container
registry.addContainer(user_container)
return stack
def createGlobalStack(cls, new_stack_id: str, definition: DefinitionContainerInterface, **kwargs) -> GlobalStack:
stack = GlobalStack(new_stack_id)
stack.setDefinition(definition)
user_container = InstanceContainer(new_stack_id + "_user")
user_container.addMetaDataEntry("type", "user")
user_container.addMetaDataEntry("machine", new_stack_id)
from cura.CuraApplication import CuraApplication
user_container.addMetaDataEntry("setting_version", CuraApplication.SettingVersion)
user_container.setDefinition(definition.getId())
stack.setUserChanges(user_container)
# Important! The order here matters, because that allows the stack to
# assume the material and variant have already been set.
if "definition_changes" in kwargs:
stack.setDefinitionChangesById(kwargs["definition_changes"])
else:
stack.setDefinitionChanges(cls.createDefinitionChangesContainer(stack, new_stack_id + "_settings"))
if "variant" in kwargs:
stack.setVariantById(kwargs["variant"])
if "material" in kwargs:
stack.setMaterialById(kwargs["material"])
if "quality" in kwargs:
stack.setQualityById(kwargs["quality"])
if "quality_changes" in kwargs:
stack.setQualityChangesById(kwargs["quality_changes"])
registry = ContainerRegistry.getInstance()
registry.addContainer(stack)
registry.addContainer(user_container)
return stack
def createExtruderTrain(self, extruder_definition: DefinitionContainerInterface, machine_definition: DefinitionContainerInterface,
position, machine_id: str) -> None:
# Cache some things.
container_registry = ContainerRegistry.getInstance()
machine_definition_id = Application.getInstance().getMachineManager().getQualityDefinitionId(machine_definition)
# Create a container stack for this extruder.
extruder_stack_id = container_registry.uniqueName(extruder_definition.getId())
container_stack = ContainerStack(extruder_stack_id)
container_stack.setName(extruder_definition.getName()) # Take over the display name to display the stack with.
container_stack.addMetaDataEntry("type", "extruder_train")
container_stack.addMetaDataEntry("machine", machine_id)
container_stack.addMetaDataEntry("position", position)
container_stack.addContainer(extruder_definition)
# Find the variant to use for this extruder.
variant = container_registry.findInstanceContainers(id = "empty_variant")[0]
if machine_definition.getMetaDataEntry("has_variants"):
# First add any variant. Later, overwrite with preference if the preference is valid.
variants = container_registry.findInstanceContainers(definition = machine_definition_id, type = "variant")
if len(variants) >= 1:
variant = variants[0]
preferred_variant_id = machine_definition.getMetaDataEntry("preferred_variant")
if preferred_variant_id:
preferred_variants = container_registry.findInstanceContainers(id = preferred_variant_id, definition = machine_definition_id, type = "variant")
if len(preferred_variants) >= 1:
variant = preferred_variants[0]
else:
Logger.log("w", "The preferred variant \"%s\" of machine %s doesn't exist or is not a variant profile.", preferred_variant_id, machine_id)
# And leave it at the default variant.
container_stack.addContainer(variant)
# Find a material to use for this variant.
material = container_registry.findInstanceContainers(id = "empty_material")[0]
if machine_definition.getMetaDataEntry("has_materials"):
# First add any material. Later, overwrite with preference if the preference is valid.
machine_has_variant_materials = machine_definition.getMetaDataEntry("has_variant_materials", default = False)
if machine_has_variant_materials or machine_has_variant_materials == "True":
materials = container_registry.findInstanceContainers(type = "material", definition = machine_definition_id, variant = variant.getId())
else:
materials = container_registry.findInstanceContainers(type = "material", definition = machine_definition_id)
if len(materials) >= 1:
material = materials[0]
preferred_material_id = machine_definition.getMetaDataEntry("preferred_material")
if preferred_material_id:
global_stack = ContainerRegistry.getInstance().findContainerStacks(id = machine_id)
if global_stack:
approximate_material_diameter = str(round(global_stack[0].getProperty("material_diameter", "value")))
else:
approximate_material_diameter = str(round(machine_definition.getProperty("material_diameter", "value")))
search_criteria = { "type": "material", "id": preferred_material_id, "approximate_diameter": approximate_material_diameter}
if machine_definition.getMetaDataEntry("has_machine_materials"):
search_criteria["definition"] = machine_definition_id
if machine_definition.getMetaDataEntry("has_variants") and variant:
search_criteria["variant"] = variant.id
else:
search_criteria["definition"] = "fdmprinter"
preferred_materials = container_registry.findInstanceContainers(**search_criteria)
if len(preferred_materials) >= 1:
# In some cases we get multiple materials. In that case, prefer materials that are marked as read only.
read_only_preferred_materials = [preferred_material for preferred_material in preferred_materials if preferred_material.isReadOnly()]
if len(read_only_preferred_materials) >= 1:
material = read_only_preferred_materials[0]
else:
material = preferred_materials[0]
else:
Logger.log("w", "The preferred material \"%s\" of machine %s doesn't exist or is not a material profile.", preferred_material_id, machine_id)
# And leave it at the default material.
container_stack.addContainer(material)
# Find a quality to use for this extruder.
quality = container_registry.getEmptyInstanceContainer()
search_criteria = { "type": "quality" }
if machine_definition.getMetaDataEntry("has_machine_quality"):
search_criteria["definition"] = machine_definition_id
if machine_definition.getMetaDataEntry("has_materials") and material:
search_criteria["material"] = material.id
else:
search_criteria["definition"] = "fdmprinter"
preferred_quality = machine_definition.getMetaDataEntry("preferred_quality")
if preferred_quality:
search_criteria["id"] = preferred_quality
containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
if not containers and preferred_quality:
Logger.log("w", "The preferred quality \"%s\" of machine %s doesn't exist or is not a quality profile.", preferred_quality, machine_id)
search_criteria.pop("id", None)
containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
if containers:
quality = containers[0]
container_stack.addContainer(quality)
empty_quality_changes = container_registry.findInstanceContainers(id = "empty_quality_changes")[0]
container_stack.addContainer(empty_quality_changes)
user_profile = container_registry.findInstanceContainers(type = "user", extruder = extruder_stack_id)
if user_profile: # There was already a user profile, loaded from settings.
user_profile = user_profile[0]
else:
user_profile = InstanceContainer(extruder_stack_id + "_current_settings") # Add an empty user profile.
user_profile.addMetaDataEntry("type", "user")
user_profile.addMetaDataEntry("extruder", extruder_stack_id)
from cura.CuraApplication import CuraApplication
user_profile.addMetaDataEntry("setting_version", CuraApplication.SettingVersion)
user_profile.setDefinition(machine_definition)
container_registry.addContainer(user_profile)
container_stack.addContainer(user_profile)
# regardless of what the next stack is, we have to set it again, because of signal routing.
container_stack.setNextStack(Application.getInstance().getGlobalContainerStack())
container_registry.addContainer(container_stack)
def createExtruderTrain(self, extruder_definition: DefinitionContainerInterface, machine_definition: DefinitionContainerInterface,
position, machine_id: str) -> None:
# Cache some things.
container_registry = ContainerRegistry.getInstance()
machine_definition_id = Application.getInstance().getMachineManager().getQualityDefinitionId(machine_definition)
# Create a container stack for this extruder.
extruder_stack_id = container_registry.uniqueName(extruder_definition.getId())
container_stack = ContainerStack(extruder_stack_id)
container_stack.setName(extruder_definition.getName()) # Take over the display name to display the stack with.
container_stack.addMetaDataEntry("type", "extruder_train")
container_stack.addMetaDataEntry("machine", machine_id)
container_stack.addMetaDataEntry("position", position)
container_stack.addContainer(extruder_definition)
# Find the variant to use for this extruder.
variant = container_registry.findInstanceContainers(id = "empty_variant")[0]
if machine_definition.getMetaDataEntry("has_variants"):
# First add any variant. Later, overwrite with preference if the preference is valid.
variants = container_registry.findInstanceContainers(definition = machine_definition_id, type = "variant")
if len(variants) >= 1:
variant = variants[0]
preferred_variant_id = machine_definition.getMetaDataEntry("preferred_variant")
if preferred_variant_id:
preferred_variants = container_registry.findInstanceContainers(id = preferred_variant_id, definition = machine_definition_id, type = "variant")
if len(preferred_variants) >= 1:
variant = preferred_variants[0]
else:
Logger.log("w", "The preferred variant \"%s\" of machine %s doesn't exist or is not a variant profile.", preferred_variant_id, machine_id)
# And leave it at the default variant.
container_stack.addContainer(variant)
# Find a material to use for this variant.
material = container_registry.findInstanceContainers(id = "empty_material")[0]
if machine_definition.getMetaDataEntry("has_materials"):
# First add any material. Later, overwrite with preference if the preference is valid.
machine_has_variant_materials = machine_definition.getMetaDataEntry("has_variant_materials", default = False)
if machine_has_variant_materials or machine_has_variant_materials == "True":
materials = container_registry.findInstanceContainers(type = "material", definition = machine_definition_id, variant = variant.getId())
else:
materials = container_registry.findInstanceContainers(type = "material", definition = machine_definition_id)
if len(materials) >= 1:
material = materials[0]
preferred_material_id = machine_definition.getMetaDataEntry("preferred_material")
if preferred_material_id:
global_stack = ContainerRegistry.getInstance().findContainerStacks(id = machine_id)
if global_stack:
approximate_material_diameter = str(round(global_stack[0].getProperty("material_diameter", "value")))
else:
approximate_material_diameter = str(round(machine_definition.getProperty("material_diameter", "value")))
search_criteria = { "type": "material", "id": preferred_material_id, "approximate_diameter": approximate_material_diameter}
if machine_definition.getMetaDataEntry("has_machine_materials"):
search_criteria["definition"] = machine_definition_id
if machine_definition.getMetaDataEntry("has_variants") and variant:
search_criteria["variant"] = variant.id
else:
search_criteria["definition"] = "fdmprinter"
preferred_materials = container_registry.findInstanceContainers(**search_criteria)
if len(preferred_materials) >= 1:
# In some cases we get multiple materials. In that case, prefer materials that are marked as read only.
read_only_preferred_materials = [preferred_material for preferred_material in preferred_materials if preferred_material.isReadOnly()]
if len(read_only_preferred_materials) >= 1:
material = read_only_preferred_materials[0]
else:
material = preferred_materials[0]
else:
Logger.log("w", "The preferred material \"%s\" of machine %s doesn't exist or is not a material profile.", preferred_material_id, machine_id)
# And leave it at the default material.
container_stack.addContainer(material)
# Find a quality to use for this extruder.
quality = container_registry.getEmptyInstanceContainer()
search_criteria = { "type": "quality" }
if machine_definition.getMetaDataEntry("has_machine_quality"):
search_criteria["definition"] = machine_definition_id
if machine_definition.getMetaDataEntry("has_materials") and material:
search_criteria["material"] = material.id
else:
search_criteria["definition"] = "fdmprinter"
preferred_quality = machine_definition.getMetaDataEntry("preferred_quality")
if preferred_quality:
search_criteria["id"] = preferred_quality
containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
if not containers and preferred_quality:
Logger.log("w", "The preferred quality \"%s\" of machine %s doesn't exist or is not a quality profile.", preferred_quality, machine_id)
search_criteria.pop("id", None)
containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria)
if containers:
quality = containers[0]
container_stack.addContainer(quality)
empty_quality_changes = container_registry.findInstanceContainers(id = "empty_quality_changes")[0]
container_stack.addContainer(empty_quality_changes)
user_profile = container_registry.findInstanceContainers(type = "user", extruder = extruder_stack_id)
if user_profile: # There was already a user profile, loaded from settings.
user_profile = user_profile[0]
else:
user_profile = InstanceContainer(extruder_stack_id + "_current_settings") # Add an empty user profile.
user_profile.addMetaDataEntry("type", "user")
user_profile.addMetaDataEntry("extruder", extruder_stack_id)
from cura.CuraApplication import CuraApplication
user_profile.addMetaDataEntry("setting_version", CuraApplication.SettingVersion)
user_profile.setDefinition(machine_definition)
container_registry.addContainer(user_profile)
container_stack.addContainer(user_profile)
# regardless of what the next stack is, we have to set it again, because of signal routing.
container_stack.setNextStack(Application.getInstance().getGlobalContainerStack())
container_registry.addContainer(container_stack)