def addMachineExtruders(self, machine_definition: DefinitionContainerInterface, machine_id: str) -> None: changed = False machine_definition_id = machine_definition.getId() if machine_id not in self._extruder_trains: self._extruder_trains[machine_id] = { } changed = True container_registry = ContainerRegistry.getInstance() if container_registry: # Add the extruder trains that don't exist yet. for extruder_definition in container_registry.findDefinitionContainers(machine = machine_definition_id): position = extruder_definition.getMetaDataEntry("position", None) if not position: Logger.log("w", "Extruder definition %s specifies no position metadata entry.", extruder_definition.getId()) if not container_registry.findContainerStacks(machine = machine_id, position = position): # Doesn't exist yet. self.createExtruderTrain(extruder_definition, machine_definition, position, machine_id) changed = True # Gets the extruder trains that we just created as well as any that still existed. extruder_trains = container_registry.findContainerStacks(type = "extruder_train", machine = machine_id) for extruder_train in extruder_trains: self._extruder_trains[machine_id][extruder_train.getMetaDataEntry("position")] = extruder_train # regardless of what the next stack is, we have to set it again, because of signal routing. extruder_train.setNextStack(Application.getInstance().getGlobalContainerStack()) changed = True if changed: self.extrudersChanged.emit(machine_id)
def createGlobalStack(cls, new_stack_id: str, definition: DefinitionContainerInterface, variant_container, material_container, quality_container) -> GlobalStack: from cura.CuraApplication import CuraApplication application = CuraApplication.getInstance() stack = GlobalStack(new_stack_id) stack.setDefinition(definition) # Create user container user_container = cls.createUserChangesContainer(new_stack_id + "_user", definition.getId(), new_stack_id, is_global_stack=True) stack.definitionChanges = cls.createDefinitionChangesContainer( stack, new_stack_id + "_settings") stack.variant = variant_container stack.material = material_container stack.quality = quality_container stack.qualityChanges = application.empty_quality_changes_container stack.userChanges = user_container ContainerRegistry.getInstance().addContainer(user_container) return stack
def addMachineExtruders(self, machine_definition: DefinitionContainerInterface, machine_id: str) -> None: changed = False machine_definition_id = machine_definition.getId() if machine_id not in self._extruder_trains: self._extruder_trains[machine_id] = { } changed = True container_registry = ContainerRegistry.getInstance() if container_registry: # Add the extruder trains that don't exist yet. for extruder_definition in container_registry.findDefinitionContainers(machine = machine_definition_id): position = extruder_definition.getMetaDataEntry("position", None) if not position: Logger.log("w", "Extruder definition %s specifies no position metadata entry.", extruder_definition.getId()) if not container_registry.findContainerStacks(machine = machine_id, position = position): # Doesn't exist yet. self.createExtruderTrain(extruder_definition, machine_definition, position, machine_id) changed = True # Gets the extruder trains that we just created as well as any that still existed. extruder_trains = container_registry.findContainerStacks(type = "extruder_train", machine = machine_id) for extruder_train in extruder_trains: self._extruder_trains[machine_id][extruder_train.getMetaDataEntry("position")] = extruder_train # regardless of what the next stack is, we have to set it again, because of signal routing. extruder_train.setNextStack(Application.getInstance().getGlobalContainerStack()) changed = True if changed: self.extrudersChanged.emit(machine_id)
def createGlobalStack(cls, new_stack_id: str, definition: DefinitionContainerInterface, variant_container: "InstanceContainer", material_container: "InstanceContainer", quality_container: "InstanceContainer") -> GlobalStack: from cura.CuraApplication import CuraApplication application = CuraApplication.getInstance() registry = application.getContainerRegistry() stack = GlobalStack(new_stack_id) stack.setDefinition(definition) # Create user container user_container = cls.createUserChangesContainer(new_stack_id + "_user", definition.getId(), new_stack_id, is_global_stack = True) stack.definitionChanges = cls.createDefinitionChangesContainer(stack, new_stack_id + "_settings") stack.variant = variant_container stack.material = material_container stack.quality = quality_container stack.qualityChanges = application.empty_quality_changes_container stack.userChanges = user_container registry.addContainer(user_container) return stack
def createGlobalStack(cls, new_stack_id: str, definition: DefinitionContainerInterface, **kwargs) -> GlobalStack: stack = GlobalStack(new_stack_id) stack.setDefinition(definition) user_container = InstanceContainer(new_stack_id + "_user") user_container.addMetaDataEntry("type", "user") user_container.addMetaDataEntry("machine", new_stack_id) from cura.CuraApplication import CuraApplication user_container.addMetaDataEntry("setting_version", CuraApplication.SettingVersion) user_container.setDefinition(definition.getId()) stack.setUserChanges(user_container) # Important! The order here matters, because that allows the stack to # assume the material and variant have already been set. if "definition_changes" in kwargs: stack.setDefinitionChangesById(kwargs["definition_changes"]) else: stack.setDefinitionChanges( cls.createDefinitionChangesContainer( stack, new_stack_id + "_settings")) if "variant" in kwargs: stack.setVariantById(kwargs["variant"]) if "material" in kwargs: stack.setMaterialById(kwargs["material"]) if "quality" in kwargs: stack.setQualityById(kwargs["quality"]) if "quality_changes" in kwargs: stack.setQualityChangesById(kwargs["quality_changes"]) registry = ContainerRegistry.getInstance() registry.addContainer(stack) registry.addContainer(user_container) return stack
def createGlobalStack( cls, new_stack_id: str, definition: DefinitionContainerInterface, variant_container: "InstanceContainer", material_container: "InstanceContainer", quality_container: "InstanceContainer") -> GlobalStack: """Create a new Global stack :param new_stack_id: The ID of the new stack. :param definition: The definition to base the new stack on. :param variant_container: The variant selected for the current stack. :param material_container: The material selected for the current stack. :param quality_container: The quality selected for the current stack. :return: A new Global stack instance with the specified parameters. """ from cura.CuraApplication import CuraApplication application = CuraApplication.getInstance() registry = application.getContainerRegistry() stack = GlobalStack(new_stack_id) stack.setDefinition(definition) # Create user container user_container = cls.createUserChangesContainer(new_stack_id + "_user", definition.getId(), new_stack_id, is_global_stack=True) stack.definitionChanges = cls.createDefinitionChangesContainer( stack, new_stack_id + "_settings") stack.variant = variant_container stack.material = material_container stack.quality = quality_container stack.intent = application.empty_intent_container stack.qualityChanges = application.empty_quality_changes_container stack.userChanges = user_container registry.addContainer(user_container) return stack
def createGlobalStack(cls, new_stack_id: str, definition: DefinitionContainerInterface, **kwargs) -> GlobalStack: stack = GlobalStack(new_stack_id) stack.setDefinition(definition) user_container = InstanceContainer(new_stack_id + "_user") user_container.addMetaDataEntry("type", "user") user_container.addMetaDataEntry("machine", new_stack_id) from cura.CuraApplication import CuraApplication user_container.addMetaDataEntry("setting_version", CuraApplication.SettingVersion) user_container.setDefinition(definition.getId()) stack.setUserChanges(user_container) # Important! The order here matters, because that allows the stack to # assume the material and variant have already been set. if "definition_changes" in kwargs: stack.setDefinitionChangesById(kwargs["definition_changes"]) else: stack.setDefinitionChanges(cls.createDefinitionChangesContainer(stack, new_stack_id + "_settings")) if "variant" in kwargs: stack.setVariantById(kwargs["variant"]) if "material" in kwargs: stack.setMaterialById(kwargs["material"]) if "quality" in kwargs: stack.setQualityById(kwargs["quality"]) if "quality_changes" in kwargs: stack.setQualityChangesById(kwargs["quality_changes"]) registry = ContainerRegistry.getInstance() registry.addContainer(stack) registry.addContainer(user_container) return stack
def createExtruderTrain(self, extruder_definition: DefinitionContainerInterface, machine_definition: DefinitionContainerInterface, position, machine_id: str) -> None: # Cache some things. container_registry = ContainerRegistry.getInstance() machine_definition_id = Application.getInstance().getMachineManager().getQualityDefinitionId(machine_definition) # Create a container stack for this extruder. extruder_stack_id = container_registry.uniqueName(extruder_definition.getId()) container_stack = ContainerStack(extruder_stack_id) container_stack.setName(extruder_definition.getName()) # Take over the display name to display the stack with. container_stack.addMetaDataEntry("type", "extruder_train") container_stack.addMetaDataEntry("machine", machine_id) container_stack.addMetaDataEntry("position", position) container_stack.addContainer(extruder_definition) # Find the variant to use for this extruder. variant = container_registry.findInstanceContainers(id = "empty_variant")[0] if machine_definition.getMetaDataEntry("has_variants"): # First add any variant. Later, overwrite with preference if the preference is valid. variants = container_registry.findInstanceContainers(definition = machine_definition_id, type = "variant") if len(variants) >= 1: variant = variants[0] preferred_variant_id = machine_definition.getMetaDataEntry("preferred_variant") if preferred_variant_id: preferred_variants = container_registry.findInstanceContainers(id = preferred_variant_id, definition = machine_definition_id, type = "variant") if len(preferred_variants) >= 1: variant = preferred_variants[0] else: Logger.log("w", "The preferred variant \"%s\" of machine %s doesn't exist or is not a variant profile.", preferred_variant_id, machine_id) # And leave it at the default variant. container_stack.addContainer(variant) # Find a material to use for this variant. material = container_registry.findInstanceContainers(id = "empty_material")[0] if machine_definition.getMetaDataEntry("has_materials"): # First add any material. Later, overwrite with preference if the preference is valid. machine_has_variant_materials = machine_definition.getMetaDataEntry("has_variant_materials", default = False) if machine_has_variant_materials or machine_has_variant_materials == "True": materials = container_registry.findInstanceContainers(type = "material", definition = machine_definition_id, variant = variant.getId()) else: materials = container_registry.findInstanceContainers(type = "material", definition = machine_definition_id) if len(materials) >= 1: material = materials[0] preferred_material_id = machine_definition.getMetaDataEntry("preferred_material") if preferred_material_id: global_stack = ContainerRegistry.getInstance().findContainerStacks(id = machine_id) if global_stack: approximate_material_diameter = str(round(global_stack[0].getProperty("material_diameter", "value"))) else: approximate_material_diameter = str(round(machine_definition.getProperty("material_diameter", "value"))) search_criteria = { "type": "material", "id": preferred_material_id, "approximate_diameter": approximate_material_diameter} if machine_definition.getMetaDataEntry("has_machine_materials"): search_criteria["definition"] = machine_definition_id if machine_definition.getMetaDataEntry("has_variants") and variant: search_criteria["variant"] = variant.id else: search_criteria["definition"] = "fdmprinter" preferred_materials = container_registry.findInstanceContainers(**search_criteria) if len(preferred_materials) >= 1: # In some cases we get multiple materials. In that case, prefer materials that are marked as read only. read_only_preferred_materials = [preferred_material for preferred_material in preferred_materials if preferred_material.isReadOnly()] if len(read_only_preferred_materials) >= 1: material = read_only_preferred_materials[0] else: material = preferred_materials[0] else: Logger.log("w", "The preferred material \"%s\" of machine %s doesn't exist or is not a material profile.", preferred_material_id, machine_id) # And leave it at the default material. container_stack.addContainer(material) # Find a quality to use for this extruder. quality = container_registry.getEmptyInstanceContainer() search_criteria = { "type": "quality" } if machine_definition.getMetaDataEntry("has_machine_quality"): search_criteria["definition"] = machine_definition_id if machine_definition.getMetaDataEntry("has_materials") and material: search_criteria["material"] = material.id else: search_criteria["definition"] = "fdmprinter" preferred_quality = machine_definition.getMetaDataEntry("preferred_quality") if preferred_quality: search_criteria["id"] = preferred_quality containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria) if not containers and preferred_quality: Logger.log("w", "The preferred quality \"%s\" of machine %s doesn't exist or is not a quality profile.", preferred_quality, machine_id) search_criteria.pop("id", None) containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria) if containers: quality = containers[0] container_stack.addContainer(quality) empty_quality_changes = container_registry.findInstanceContainers(id = "empty_quality_changes")[0] container_stack.addContainer(empty_quality_changes) user_profile = container_registry.findInstanceContainers(type = "user", extruder = extruder_stack_id) if user_profile: # There was already a user profile, loaded from settings. user_profile = user_profile[0] else: user_profile = InstanceContainer(extruder_stack_id + "_current_settings") # Add an empty user profile. user_profile.addMetaDataEntry("type", "user") user_profile.addMetaDataEntry("extruder", extruder_stack_id) from cura.CuraApplication import CuraApplication user_profile.addMetaDataEntry("setting_version", CuraApplication.SettingVersion) user_profile.setDefinition(machine_definition) container_registry.addContainer(user_profile) container_stack.addContainer(user_profile) # regardless of what the next stack is, we have to set it again, because of signal routing. container_stack.setNextStack(Application.getInstance().getGlobalContainerStack()) container_registry.addContainer(container_stack)
def createExtruderTrain(self, extruder_definition: DefinitionContainerInterface, machine_definition: DefinitionContainerInterface, position, machine_id: str) -> None: # Cache some things. container_registry = ContainerRegistry.getInstance() machine_definition_id = Application.getInstance().getMachineManager().getQualityDefinitionId(machine_definition) # Create a container stack for this extruder. extruder_stack_id = container_registry.uniqueName(extruder_definition.getId()) container_stack = ContainerStack(extruder_stack_id) container_stack.setName(extruder_definition.getName()) # Take over the display name to display the stack with. container_stack.addMetaDataEntry("type", "extruder_train") container_stack.addMetaDataEntry("machine", machine_id) container_stack.addMetaDataEntry("position", position) container_stack.addContainer(extruder_definition) # Find the variant to use for this extruder. variant = container_registry.findInstanceContainers(id = "empty_variant")[0] if machine_definition.getMetaDataEntry("has_variants"): # First add any variant. Later, overwrite with preference if the preference is valid. variants = container_registry.findInstanceContainers(definition = machine_definition_id, type = "variant") if len(variants) >= 1: variant = variants[0] preferred_variant_id = machine_definition.getMetaDataEntry("preferred_variant") if preferred_variant_id: preferred_variants = container_registry.findInstanceContainers(id = preferred_variant_id, definition = machine_definition_id, type = "variant") if len(preferred_variants) >= 1: variant = preferred_variants[0] else: Logger.log("w", "The preferred variant \"%s\" of machine %s doesn't exist or is not a variant profile.", preferred_variant_id, machine_id) # And leave it at the default variant. container_stack.addContainer(variant) # Find a material to use for this variant. material = container_registry.findInstanceContainers(id = "empty_material")[0] if machine_definition.getMetaDataEntry("has_materials"): # First add any material. Later, overwrite with preference if the preference is valid. machine_has_variant_materials = machine_definition.getMetaDataEntry("has_variant_materials", default = False) if machine_has_variant_materials or machine_has_variant_materials == "True": materials = container_registry.findInstanceContainers(type = "material", definition = machine_definition_id, variant = variant.getId()) else: materials = container_registry.findInstanceContainers(type = "material", definition = machine_definition_id) if len(materials) >= 1: material = materials[0] preferred_material_id = machine_definition.getMetaDataEntry("preferred_material") if preferred_material_id: global_stack = ContainerRegistry.getInstance().findContainerStacks(id = machine_id) if global_stack: approximate_material_diameter = str(round(global_stack[0].getProperty("material_diameter", "value"))) else: approximate_material_diameter = str(round(machine_definition.getProperty("material_diameter", "value"))) search_criteria = { "type": "material", "id": preferred_material_id, "approximate_diameter": approximate_material_diameter} if machine_definition.getMetaDataEntry("has_machine_materials"): search_criteria["definition"] = machine_definition_id if machine_definition.getMetaDataEntry("has_variants") and variant: search_criteria["variant"] = variant.id else: search_criteria["definition"] = "fdmprinter" preferred_materials = container_registry.findInstanceContainers(**search_criteria) if len(preferred_materials) >= 1: # In some cases we get multiple materials. In that case, prefer materials that are marked as read only. read_only_preferred_materials = [preferred_material for preferred_material in preferred_materials if preferred_material.isReadOnly()] if len(read_only_preferred_materials) >= 1: material = read_only_preferred_materials[0] else: material = preferred_materials[0] else: Logger.log("w", "The preferred material \"%s\" of machine %s doesn't exist or is not a material profile.", preferred_material_id, machine_id) # And leave it at the default material. container_stack.addContainer(material) # Find a quality to use for this extruder. quality = container_registry.getEmptyInstanceContainer() search_criteria = { "type": "quality" } if machine_definition.getMetaDataEntry("has_machine_quality"): search_criteria["definition"] = machine_definition_id if machine_definition.getMetaDataEntry("has_materials") and material: search_criteria["material"] = material.id else: search_criteria["definition"] = "fdmprinter" preferred_quality = machine_definition.getMetaDataEntry("preferred_quality") if preferred_quality: search_criteria["id"] = preferred_quality containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria) if not containers and preferred_quality: Logger.log("w", "The preferred quality \"%s\" of machine %s doesn't exist or is not a quality profile.", preferred_quality, machine_id) search_criteria.pop("id", None) containers = ContainerRegistry.getInstance().findInstanceContainers(**search_criteria) if containers: quality = containers[0] container_stack.addContainer(quality) empty_quality_changes = container_registry.findInstanceContainers(id = "empty_quality_changes")[0] container_stack.addContainer(empty_quality_changes) user_profile = container_registry.findInstanceContainers(type = "user", extruder = extruder_stack_id) if user_profile: # There was already a user profile, loaded from settings. user_profile = user_profile[0] else: user_profile = InstanceContainer(extruder_stack_id + "_current_settings") # Add an empty user profile. user_profile.addMetaDataEntry("type", "user") user_profile.addMetaDataEntry("extruder", extruder_stack_id) from cura.CuraApplication import CuraApplication user_profile.addMetaDataEntry("setting_version", CuraApplication.SettingVersion) user_profile.setDefinition(machine_definition) container_registry.addContainer(user_profile) container_stack.addContainer(user_profile) # regardless of what the next stack is, we have to set it again, because of signal routing. container_stack.setNextStack(Application.getInstance().getGlobalContainerStack()) container_registry.addContainer(container_stack)