def calculate_suitability(self):
"""
calculate set of suitability points to constrain the potential locations of new_ponds.
new_ponds can only be placed on cells that meet the following conditions:
1) outside the bounds existing beaver territory
2) on mapped streams with gradients <= 8 degrees
3) above the highest tidal influence
:return:
"""
# TODO what other conditions need to be met, make sure the correct stream types are used
# TODO recalculate suitable streams with new landcover
if type(self.SUITABLE_STREAMS) == str:
self.SUITABLE_STREAMS = arcpy.Raster(self.SUITABLE_STREAMS)
# calculate current territories
exclude_territory = self.calculate_territory()
# intersect un-colonized parts of the landscape with suitable streams
suitability_surface = exclude_territory * self.SUITABLE_STREAMS
suitability_surface_set_null = arcpy.sa.SetNull(
suitability_surface == 0, suitability_surface)
# convert suitable cells to points for random selection and watershed pour point
arcpy.RasterToPoint_conversion(
in_raster=suitability_surface_set_null,
out_point_features=self.suitability_points)
def get_patch_wses(self):
"""Gets list of WSE values in each patch at each discharge"""
self.logger.info("Getting patch WSE values...")
for q in self.discharges:
# convert each WSE ras to points
self.logger.info("Discharge: %s " % q)
wse_pts = os.path.join(self.cache, 'wse_pts.shp')
arcpy.RasterToPoint_conversion(self.q_wse_dict[q], wse_pts)
# extract patch num. to each point
wse_patch_pts = os.path.join(self.cache, 'wse_patch_pts.shp')
ExtractValuesToPoints(wse_pts, self.patch_ras, wse_patch_pts)
# export attribute table to csv
wse_patch_table = 'patch_table%i.csv' % int(q)
# 'RASTERVALU' = patch number, 'grid_code' = WSE
array = arcpy.da.FeatureClassToNumPyArray(wse_patch_pts, ['RASTERVALU', 'grid_code'], skip_nulls=True,
where_clause='RASTERVALU <> -9999')
df = pd.DataFrame(array.tolist(), columns=['patch', 'WSE'])
df = df.groupby('patch')['WSE'].apply(list)
for patch in df.index:
if patch in self.patch_wses.keys():
self.patch_wses[patch].extend(df[patch])
self.patch_qs[patch].extend([q] * len(df[patch]))
else:
self.patch_wses[patch] = df[patch]
self.patch_qs[patch] = [q] * len(df[patch])
def run(IFile, Ofile, Snumx, Snumy, Stype):
from arcpy import env
env.overwriteOutput = "True"
print "--------------------------------------------------------------------"
print "Program GetCentroid Starts: ", time.asctime(
time.localtime(time.time()))
print "--------------------------------------------------------------------"
try:
import arcpy
from arcpy import env
arcpy.env.workspace = Ofile
cell = Snumx + " " + Snumy
# Resample TIFF image
arcpy.Resample_management(IFile, "resamplenew.tif", cell,
Stype)
inRaster = "resamplenew.tif"
outPoint = Ofile + "/outpoint.shp"
field = "VALUE"
arcpy.RasterToPoint_conversion(inRaster, outPoint, field)
print "Input corret, output file has been generated..!"
print "--------------------------------------------------------------------"
print "Program GetCentroid Ends: ", time.asctime(
time.localtime(time.time()))
print "--------------------------------------------------------------------"
except:
print "Resample example failed."
print arcpy.GetMessages()
def ExtractVals(nc, aoi, out):
i = 0
for j in aoi:
#Mask out raster with Marine Reserve limits and save it
mask = arcpy.sa.ExtractByMask(nc, j)
mask.save("SST_" + out[i] + ".TIF")
#Create point features from masked out raster
Pts = arcpy.RasterToPoint_conversion(mask, "SST_Pts" + out[i] + ".shp",
"Value")
#Extract values from multiple layers to point features
SSTVal = arcpy.gp.ExtractMultiValuesToPoints_sa(
Pts, "SST_" + out[i] + ".tif SST_" + out[i], "NONE")
#Save attribute table of point features in excel format
arcpy.TableToExcel_conversion(SSTVal, "SSTValues" + out[i] + ".xls",
"NAME", "CODE")
#Read excel table
SSTPtVal = pd.ExcelFile("SSTValues" + out[i] + ".xls")
#Load first excel sheet
SST_sheet = SSTPtVal.parse(SSTPtVal.sheet_names[0])
#Create dictionary to change column names to months
NewColNames = dict(zip(SST_sheet.columns[3:14], TimeLabs))
#Change column names using dictionary
SST_sheet.rename(columns=NewColNames, inplace=True)
#Write file with corrected column names into a csv file for further analysis
SST_sheet.to_csv("SST_Values" + out[i] + ".csv")
i += 1
def execute_FromPoints(flowacc, area_threshold, str_frompoints, messages, language = "FR"):
# Calcul du seuil pour les points de départ sur le raster "flow accumulation"
flowacc_threshold = area_threshold * 1000 * 1000 / (flowacc.meanCellWidth * flowacc.meanCellHeight)
# Création du raster des cours d'eau
binrivers = arcpy.sa.SetNull(flowacc, 1, "VALUE < " + str(flowacc_threshold))
# Calcul du nombre de pixels voisines étant des cours d'eau
nbvoisins = arcpy.sa.FocalStatistics(binrivers, arcpy.sa.NbrRectangle(3,3,"CELL"), "SUM", "")
# On ne garde que les extrémités (1 voisin, donc nbvoisin = 2)
extremities = arcpy.sa.SetNull(nbvoisins, binrivers, "VALUE <> 2")
# On supprime les points situés sur le bord (exutoires de la zone modélisée)
noborders = arcpy.sa.FocalStatistics(flowacc, arcpy.sa.NbrRectangle(3, 3, "CELL"), "SUM", "NODATA")
borders = arcpy.sa.IsNull(noborders)
frompoints = arcpy.sa.SetNull(borders, extremities, "VALUE = 1")
# On convertit le raster en shapefile
arcpy.RasterToPoint_conversion(frompoints, str_frompoints)
return
def finddist(clatoshad_14, dir, path):
path2 = path
# Local variables:
points_shp = "{}\\points.shp".format(path2)
dist1 = "{}\\dist1".format(path2)
# Process: Raster to Point
arcpy.RasterToPoint_conversion(clatoshad_14, points_shp, "VALUE")
# Process: Add XY Coordinates
arcpy.AddXY_management(points_shp)
# Process: Add Field
arcpy.AddField_management(points_shp, "distfield", "FLOAT", "", "", "", "",
"NULLABLE", "NON_REQUIRED", "")
xlist = []
ylist = []
finames = ['POINT_X', 'POINT_Y', 'distfield']
rows = arcpy.da.UpdateCursor(points_shp, finames)
for row in rows:
xlist.append(row[0])
ylist.append(row[1])
rows.reset()
for row in rows:
if dir == 'e':
changex = row[0] - min(xlist)
changey = row[1] - min(ylist)
row[2] = math.sqrt(changex * changex + changey * changey)
if dir == 'w':
changex = row[0] - max(xlist)
changey = row[1] - min(ylist)
row[2] = math.sqrt(changex * changex + changey * changey)
rows.updateRow(row)
del row
del rows
arcpy.PointToRaster_conversion(points_shp, "distfield", dist1,
"MOST_FREQUENT", "NONE", clatoshad_14)
return dist1
def createComplainRasterFeature(SelectSQL,InputComplainFeatures,POIFeatures,FinalResultFeature):
logging.info("Process: 创建"+FinalResultFeature)
if(arcpy.Exists(FinalResultFeature)):
arcpy.Delete_management(FinalResultFeature, "FeatureClass")
rmNo = random.randint(100000000,999999999)
print rmNo
# Process: 筛选
print "Process: 筛选"
logging.info("Process: 筛选")
FeatureSelect=arcpy.Select_analysis(InputComplainFeatures, "in_memory/FeatureSelect"+repr(rmNo), SelectSQL)
# Process: 点转栅格
print FeatureSelect
rowSear = arcpy.SearchCursor(FeatureSelect)
row = rowSear.next()
if(row):
print "Process: 点转栅格"
logging.info("Process: 点转栅格")
tempEnvironment0 = arcpy.env.extent
arcpy.env.extent = "115 23 122 29"
ResultRaster=arcpy.PointToRaster_conversion(FeatureSelect, "OBJECTID", "in_memory/ResultRaster"+repr(rmNo), "COUNT", "NONE", ".0018")
arcpy.env.extent = tempEnvironment0
# Process: 栅格转点
print "Process: 栅格转点"
logging.info("Process: 栅格转点")
COMPLAIN_RASTER_POINTS=arcpy.RasterToPoint_conversion(ResultRaster, "in_memory/COMPLAIN_RASTER_POINTS"+repr(rmNo), "VALUE")
print "Process: 空间连接"
# Process: 空间连接
COMPLAIN_POI_UNION=arcpy.SpatialJoin_analysis(COMPLAIN_RASTER_POINTS, POI, "in_memory/COMPLAIN_POI_UNION"+repr(rmNo), "JOIN_ONE_TO_ONE", "KEEP_ALL", "","CLOSEST", ".1 DecimalDegrees", "DISTANCE")
print "Process: 点转栅格 (2)"
logging.info("Process: 点转栅格 (2)")
# Process: 点转栅格 (2)
tempEnvironment0 = arcpy.env.extent
arcpy.env.extent = "115 23 122 29"
ResultRaster2=arcpy.PointToRaster_conversion(COMPLAIN_POI_UNION, "OBJECTID", "in_memory/ResultRaster2"+repr(rmNo), "MOST_FREQUENT", "NONE", ".0018")
arcpy.env.extent = tempEnvironment0
print "Process: 栅格转面"
logging.info("Process: 栅格转面")
# Process: 栅格转面
ResultFeature=arcpy.RasterToPolygon_conversion(ResultRaster2, "in_memory/ResultFeature"+repr(rmNo), "NO_SIMPLIFY", "VALUE")
print "Process: 空间连接 (2)"
logging.info("Process: 空间连接 (2)")
# Process: 空间连接 (2)
ResultFeatureZj=arcpy.SpatialJoin_analysis(ResultFeature, COMPLAIN_POI_UNION, "in_memory/ResultFeatureZj"+repr(rmNo), "JOIN_ONE_TO_ONE", "KEEP_ALL", "", "INTERSECT", "", "")
# Process: 空间连接 (3)
arcpy.SpatialJoin_analysis(FeatureSelect, ResultFeatureZj, FinalResultFeature, "JOIN_ONE_TO_ONE", "KEEP_ALL", "", "INTERSECT", "", "")
#arcpy.SpatialJoin_analysis(FeatureSelect, ResultFeatureZj, FinalResultFeature, "JOIN_ONE_TO_ONE", "KEEP_ALL", "TIME \"TIME\" true true false 8 Date 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\GIS_OBJECT_COMPLAIN_Select1,TIME,-1,-1;WORK_ORDER_ID \"WORK_ORDER_ID\" true true false 100 Text 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\GIS_OBJECT_COMPLAIN_Select1,WORK_ORDER_ID,-1,-1;DISTANCE \"DISTANCE\" true true false 8 Double 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\Complain20140509_SpatialJoin,DISTANCE,-1,-1;POINTID \"POINTID\" true true false 4 Long 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\Complain20140509_SpatialJoin,POINTID,-1,-1;GRID_CODE \"聚合数\" true true false 4 Long 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\Complain20140509_SpatialJoin,GRID_CODE,-1,-1;Name \"聚合地址\" true true false 160 Text 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\Complain20140509_SpatialJoin,Name,-1,-1;Ctype \"聚合地址类型(原始)\" true true false 64 Text 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\Complain20140509_SpatialJoin,Ctype,-1,-1;CnType \"聚合地址类型\" true true false 50 Text 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\Complain20140509_SpatialJoin,CnType,-1,-1;CITY \"地市\" true true false 32 Text 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\Complain20140509_SpatialJoin,CITY,-1,-1;COUNTY \"区县\" true true false 32 Text 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\Complain20140509_SpatialJoin,COUNTY,-1,-1;GRID \"GRID\" true true false 32 Text 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\Complain20140509_SpatialJoin,GRID,-1,-1;SGLON \"栅格POI经度\" true true false 8 Double 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\Complain20140509_SpatialJoin,SGLON,-1,-1;SGLAT \"栅格POI纬度\" true true false 8 Double 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\Complain20140509_SpatialJoin,SGLAT,-1,-1;CQ_REGION \"城区网格所属区域\" true true false 60 Text 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\Complain20140509_SpatialJoin,CQ_REGION,-1,-1;CQ_REGION_TYPE \"城区网格区域属性\" true true false 60 Text 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\Complain20140509_SpatialJoin,CQ_REGION_TYPE,-1,-1;TEST_ID \"测试网格ID\" true true false 10 Text 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\Complain20140509_SpatialJoin,TEST_ID,-1,-1;TEST_GRIDID \"测试网格编号\" true true false 20 Text 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\Complain20140509_SpatialJoin,TEST_GRIDID,-1,-1;TEST_CLASS \"测试网格类型\" true true false 10 Text 0 0 ,First,#,D:\\HasmbyGis\\Cache.gdb\\Complain20140509_SpatialJoin,TEST_CLASS,-1,-1", "INTERSECT", "", "")
arcpy.Delete_management(COMPLAIN_POI_UNION)
arcpy.Delete_management(COMPLAIN_RASTER_POINTS)
arcpy.Delete_management(ResultRaster)
arcpy.Delete_management(ResultRaster2)
arcpy.Delete_management(ResultFeature)
arcpy.Delete_management(ResultFeatureZj)
del COMPLAIN_POI_UNION,COMPLAIN_RASTER_POINTS,ResultRaster,ResultRaster2,ResultFeature,ResultFeatureZj
arcpy.Delete_management(FeatureSelect)
del FeatureSelect,rowSear
logging.info("清理内存~~")
gc.collect()
def save_mu(self, *args):
# args[0] can be an optional output directory
try:
self.out_dir = args[0]
except:
pass
self.logger.info("")
self.logger.info(" * SAVING ... ")
arcpy.CheckOutExtension('Spatial') # check out license
arcpy.gp.overwriteOutput = True
arcpy.env.workspace = self.cache
arcpy.env.extent = "MAXOF"
arcpy.CheckInExtension('Spatial')
try:
self.logger.info(" * Converting MU IDs to strings:")
self.logger.info(" >> Converting raster to points ...")
pts = arcpy.RasterToPoint_conversion(self.ras_mu, self.cache + "pts_del.shp")
self.logger.info(" >> Converting numbers to strings ...")
arcpy.AddField_management(pts, "MU", "TEXT")
expression = "inverse_dict = " + fGl.dict2str(self.mu_dict, inverse_dict=True)
arcpy.CalculateField_management(pts, "MU", "inverse_dict[!grid_code!]", "PYTHON", expression)
self.logger.info(" >> OK")
self.logger.info(" * Saving MU string raster as:")
self.logger.info(str(self.out_dir) + "\\mu_str.tif")
arcpy.PointToRaster_conversion(in_features=pts, value_field="MU",
out_rasterdataset=self.out_dir + "\\mu_str.tif",
cell_assignment="MOST_FREQUENT", cellsize=5)
self.logger.info(" * OK")
except arcpy.ExecuteError:
self.logger.info("ExecuteERROR: (arcpy).")
self.logger.info(arcpy.GetMessages(2))
except Exception as e:
self.logger.info("ExceptionERROR: (arcpy).")
self.logger.info(e.args[0])
except:
self.logger.info("ERROR: Field assignment failed.")
return True
try:
self.logger.info(" * Saving mu numeric raster as:")
self.logger.info(str(self.out_dir) + "\\mu.tif")
self.ras_mu.save(self.out_dir + "\\mu.tif")
self.logger.info(" * OK")
except arcpy.ExecuteError:
self.logger.info(arcpy.AddError(arcpy.GetMessages(2)))
except Exception as e:
self.logger.info(arcpy.GetMessages(2))
except:
self.logger.info("ERROR: Saving failed.")
return True
try:
self.clean_up()
except:
pass
return False
def calcVS(unsnfltpts, bldg_veg_mask, ct, datapath):
"""
Calculates the cumulative viewshed from remaining unseen flight points. Generates Euclidean distance
to mean center table.
:param unsnfltpts: List of remaining unseen flight points
:param bldg_veg_mask: Binary mask to remove invalid observer surfaces from cumulative VS raster
:param ct: Pass number
:param datapath: Path to input/output directory
"""
print('Calculating cumulative viewshed for {} unseen flight points...'.
format(len(unsnfltpts)))
# Make chunks of flight points
usfp_chunks = makechunks(unsnfltpts, 500)
print('Flight point chunks generated')
print(len(chunk) for chunk in usfp_chunks)
chunk_sums = []
chunkpass = 1
# Sum each chunk of single viewshed rasters
for chunk in usfp_chunks:
print('Chunksum operation {} on {} flight points...'.format(
chunkpass, len(chunk)))
# Set null values equal to 0 to avoid NoData holes
chunkgen = (Con(IsNull(arcpy.Raster(datapath + "vs_" + str(usfp))), 0,
1) for usfp in chunk)
chunkstats = arcpy.sa.CellStatistics(chunkgen, 'SUM', 'NODATA')
chunk_sums.append((chunkstats))
print('...Done.')
chunkpass += 1
# Sum chunks
sumrast = arcpy.sa.CellStatistics(chunk_sums, 'SUM', 'NODATA')
sumrast.save(datapath + "vs_pass_" + str(ct) + "_unmasked")
print('Unmasked cumulative viewshed saved.')
# mask out buildings and vegetation
# set Bldg_Veg_Mask cells to 0
unmasked = arcpy.Raster(datapath + "vs_pass_" + str(ct) + "_unmasked")
cumulative_masked = unmasked * bldg_veg_mask
print('Invalid observer surfaces masked.')
# set 0 value cells to Null
cumulative_masked = SetNull(cumulative_masked == 0, cumulative_masked)
print('Setting null values.')
# save to .GDB as cumulative raster
cumulative_masked.save(datapath + "vs_pass_" + str(ct))
print('Masked cumulative viewshed saved.')
# Convert raster to points with number views for VS pass and X Y location
vs_total_pts_ = datapath + "vs_pass_" + str(ct) + "_pts"
arcpy.RasterToPoint_conversion(cumulative_masked, vs_total_pts_)
arcpy.AddGeometryAttributes_management(vs_total_pts_, ['POINT_X_Y_Z_M'])
print('Viewshed points for pass {} generated'.format(ct))
# Find mean center of cumulative viewshed for pass, save as feature class
vs_center_ = datapath + "vs_pass_" + str(ct) + "_cntr"
arcpy.MeanCenter_stats(vs_total_pts_, vs_center_)
print('Mean center calculated.')
# Calculate distance of each observation from centroid of observer masspoints
vs_dist_ = datapath + "vs_pass_" + str(ct) + "_dist"
arcpy.PointDistance_analysis(vs_total_pts_, vs_center_, vs_dist_)
print('Observer distances table calculated.')
def cutout_area(self, bbox, epsg, cutout_shape=None):
"""
return the centroids of the zensus cells as points inside the
selected communities
"""
zensus_points = []
zensus_raster = self.folders.ZENSUS_RASTER_FILE
# temporary paths
out_raster = os.path.join(self.tmp_folder, 'zensus_cutout')
raster_points = os.path.join(self.tmp_folder, 'raster_points')
raster_points_projected = os.path.join(self.tmp_folder,
'raster_points_projected')
raster_points_clipped = os.path.join(self.tmp_folder,
'raster_points_clipped')
def del_tmp():
for fn in [
raster_points, raster_points_projected, out_raster,
raster_points_clipped
]:
arcpy.Delete_management(fn)
del_tmp()
out_raster = os.path.join(self.tmp_folder, 'zensus_cutout')
# clip minimum to rectangle shape that still contains all communities
srid = clip_raster(zensus_raster, out_raster, bbox)
# get raster points
arcpy.RasterToPoint_conversion(out_raster, raster_points)
start = time.time()
with arcpy.da.UpdateCursor(raster_points, "GRID_CODE") as cursor:
for row in cursor:
if row[0] <= 0:
cursor.deleteRow()
print(time.time() - start)
# project raster points to gauss krueger
out_cs = arcpy.SpatialReference(epsg)
arcpy.Project_management(raster_points, raster_points_projected,
out_cs)
if cutout_shape:
# clip raster points to selected communities
arcpy.Clip_analysis(raster_points_projected, cutout_shape,
raster_points_clipped)
else:
raster_points_clipped = raster_points
# create list with zensus points for return
rows = arcpy.da.SearchCursor(raster_points_clipped,
['SHAPE@XY', 'GRID_CODE'])
zensus_points = []
index = 0
for ((x, y), value) in rows:
if value <= 0:
continue
p = ZensusCell(x, y, id=index, epsg=srid, ew=value)
zensus_points.append(p)
index += 1
# delete temporary files
del_tmp()
return zensus_points, len(zensus_points)
def raster_to_point():
inRaster = r'{}/Buurten/{}/bk_ahn.tif'.format(path,buurt)
outPoint = r'{}/RasterT_tif12'.format(outPoint_path)
field = "VALUE"
arcpy.env.overwriteOutput = True
arcpy.RasterToPoint_conversion(inRaster, outPoint, field)
def convert_raster_to_point(input_file, output_file):
"""Convert raster to point vector
Args:
input_file: input raster file
output_file: output point vector file
"""
print "Converting raster to points..."
arcpy.RasterToPoint_conversion(input_file, output_file)
def conversion(outRaster, raster):
name = os.path.split(raster)[1][:-4]
# 按掩膜提取
outExtractByMask = None
# 常熟市溯源范围矢量文件
inMaskData = u"E:\\常熟溯源\\矢量\\常熟边界\\常熟市溯源范围.shp"
# 中间文件
outCliptif = outpath + '\\' + fileslist[2] + "\\Clip_" + name + '.tif'
# 剪裁
try:
# Execute ExtractByMask
arcpy.Clip_management(outRaster, "#", outCliptif, inMaskData, "#",
"ClippingGeometry", "NO_MAINTAIN_EXTENT")
except Exception as err:
arcpy.AddMessage("------Clip_management")
arcpy.AddMessage(err)
# 重采样
# resampletif=outpath+"\\"+os.path.split(raster)[1][:-4]+'_resampletif_'+getTime()+'.tif'
# arcpy.Resample_management(outExtractByMask, resampletif, "0.0005", "BILINEAR")
inPointFeatures = outpath + '\\' + fileslist[
3] + "\\RasterToPoint_" + name + '.shp'
arcpy.AddMessage("------栅格转点开始。。。")
try:
arcpy.RasterToPoint_conversion(outCliptif, inPointFeatures, 'VALUE')
except:
arcpy.AddMessage('-------' + inPointFeatures + " 已经存在。。。")
arcpy.AddMessage("------栅格转点完成")
# 克里金插值
Krigingfile = os.path.join(outpath + '\\' + fileslist[4],
'Kriging_' + name + ".tif")
field = "GRID_CODE"
cellSize = 0.00055
outVarRaster = ""
kModel = "Spherical"
kRadius = 20000
# Execute Kriging
try:
arcpy.Kriging_3d(inPointFeatures, field, Krigingfile, kModel, cellSize,
kRadius, outVarRaster)
except:
arcpy.AddMessage('------RasterToPoint_conversion Failed')
# 常熟市范围掩膜
changshumask = u'E:\\常熟溯源\\矢量\\常熟边界\\常熟边界缓冲区-去水域.shp'
outtif = os.path.join(
outpath + '\\' + fileslist[5],
'Changshumask_' + os.path.split(raster)[1][:-4] + ".tif")
# 按掩膜提取
try:
# Execute ExtractByMask
outMask = arcpy.sa.ExtractByMask(Krigingfile, changshumask)
outCon = arcpy.sa.Con(arcpy.sa.IsNull(outMask), 0.0001, outMask)
outCon.save(outtif)
except Exception as err:
arcpy.AddMessage("------ExtractByMask Failed")
arcpy.AddMessage(err)
createTraceFiles(outtif, name)
def conversion(outRaster,raster):
# 按掩膜提取
outExtractByMask=None
# 常熟市溯源范围矢量文件
inMaskData="F:\\20190905\\data\\changshurangle\\changshutrace.shp"
# 中间文件
inPointFeatures=outpath+"\\"+os.path.split(raster)[1][:-4]+'_'+getTime()+'.shp'
try:
# Execute ExtractByMask
outExtractByMask = arcpy.sa.ExtractByMask(outRaster, inMaskData)
except Exception as err:
arcpy.AddMessage("------ExtractByMask Failed")
arcpy.AddMessage(err)
return
# 重采样
# resampletif=outpath+"\\"+os.path.split(raster)[1][:-4]+'_resampletif_'+getTime()+'.tif'
# arcpy.Resample_management(outExtractByMask, resampletif, "0.0005", "BILINEAR")
arcpy.AddMessage("------栅格转点开始。。。")
try:
arcpy.RasterToPoint_conversion(outExtractByMask, inPointFeatures, 'VALUE')
except :
arcpy.AddMessage('-------'+inPointFeatures+" 已经存在。。。")
arcpy.AddMessage("------栅格转点完成")
# 克里金插值
titfile=os.path.join(outpath,os.path.split(raster)[1][:-4]+".tif")
field = "GRID_CODE"
cellSize =0.0005
outVarRaster = ""
kModel = "Spherical"
kRadius = 20000
# Execute Kriging
try:
arcpy.Kriging_3d(inPointFeatures, field, titfile, kModel, cellSize, kRadius, outVarRaster)
except :
Arcpy.AddMessage('------RasterToPoint_conversion Failed')
arcpy.AddMessage("------栅格转点开始。。。")
outPointFeatures=outpath+"\\"+os.path.split(raster)[1][:-4]+'.shp'
try:
arcpy.RasterToPoint_conversion(titfile, outPointFeatures, 'VALUE')
except :
arcpy.AddMessage('-------'+inPointFeatures+" 已经存在。。。")
arcpy.AddMessage("------栅格转点完成")
selectByLocatin(outPointFeatures)
def rst_to_pnt(inRst, pntShp, rstField=None):
"""Raster to Points Feature Class"""
rstField = 'Value' if not rstField else rstField
arcpy.RasterToPoint_conversion(in_raster=inRst,
out_point_features=pntShp,
raster_field=rstField)
return pntShp
def spatial_join_analysis(self, raster, curve_data):
# uses curve radius data and to mark all points within this radius of the input raster
self.logger.info(" -> Converting raster to points ...")
try:
cov_points = self.cache + "cov_points.shp"
arcpy.RasterToPoint_conversion(raster, cov_points)
zero_raster = Con((IsNull(raster) == 1), (IsNull(raster) * 1), 1)
all_points = self.cache + "all_points.shp"
arcpy.RasterToPoint_conversion(zero_raster, all_points)
except:
self.error = True
self.logger.info("ERROR: Could not perform spatial radius operations (RasterToPoint_conversion).")
self.logger.info(" -> Delineating " + self.cover_type + " effect radius (spatial join radius: " + str(curve_data[0][0]) + ") ...")
try:
out_points = self.cache + "spatjoin.shp"
rad = float(curve_data[0][0])
arcpy.SpatialJoin_analysis(target_features=all_points, join_features=cov_points,
out_feature_class=out_points, join_operation="JOIN_ONE_TO_MANY",
join_type="KEEP_COMMON", field_mapping="", match_option="CLOSEST",
search_radius=rad, distance_field_name="")
except:
self.error = True
self.logger.info("ERROR: Could not perform spatial radius operations (SpatialJoin_analysis).")
self.logger.info(" -> Converting points back to raster ...")
try:
arcpy.PointToRaster_conversion(in_features=out_points, value_field="grid_code",
out_rasterdataset=self.cache + "cov_points",
cell_assignment="MEAN", cellsize=self.cell_size)
__temp_ras__ = arcpy.Raster(self.cache + "cov_points.tif")
self.logger.info(" -> Assigning spatial HSI value (" + str(curve_data[1][0]) + ") where applies (raster calculator) ...")
__ras__ = Con(__temp_ras__ > 0, curve_data[1][0]) # assign HSI value
except:
self.error = True
self.logger.info("ERROR: Could not perform spatial radius operations (back conversion).")
if not self.error:
return Float(CellStatistics([__ras__], "SUM", "DATA"))
else:
return -1
def listfile(file):
pathDir = os.listdir(file)
for contents in pathDir:
# contents=100206
try:
hourtime = contents[-2:]
datetime = contents[-4:-2]
filename = "PM25_" + hourtime + '.tif'
filepath = os.path.join(file, contents)
if os.path.isdir(filepath):
tifpath = filepath + '\\PM25\\tif\\' + filename
print(tifpath)
pm25shpdir = "F:\\changshu\\siteetis\\pm251002\\pm25_1002" + hourtime
try:
os.makedirs(pm25shpdir)
except:
print('')
timeformat = '2019' + "-10-02" + " " + hourtime + ":" + "00" + ":" + "00"
timeArray = time.strptime(timeformat, "%Y-%m-%d %H:%M:%S")
timestamp = time.mktime(timeArray)
'''try:
# 执行sql语句
sql='INSERT INTO newchangshu.ams_wms (wmsname, url, data_time, datatype, city,create_time,create_by,workspace) VALUES ({},{},{},{},{},{},{},{})'.format('"pm25_1008'+hourtime+'"','"http://119.3.37.164:8090/geoserver"',timestamp,u'"pm25"',u'"常熟"'.decode('ISO-8859-1').encode('utf-8'),int(time.time()),'"admin"','"0"')
#sql='insert into ams_sixindex values({},{},{},{},{},{})'.format(inspection_num,car_id,238,create_time,update_time)
cursor.execute(sql)
# 提交到数据库执行
db.commit()
pass
except:
# 如果发生错误则回滚
traceback.print_exc()
db.rollback()
continue'''
inPointFeatures = os.path.join(
pm25shpdir, "pm25_1002" + hourtime + hourtime + '.shp')
# 栅格转点
arcpy.RasterToPoint_conversion(tifpath, inPointFeatures,
"VALUE")
pm25zippath = 'F:\\zip\\changshu\\PM2502'
try:
os.makedirs(pm25zippath)
except:
print('')
make_zip(
pm25shpdir, pm25zippath + "\\" + "PM25_1002" + hourtime +
hourtime + ".zip")
pass
except:
pass
def createTraceFiles(in_layer, name):
# 选中常熟市企业分区1中的AOT点并导出
arcpy.AddMessage("-------制作溯源文件。。。")
# 企业分区文件位置
zoneLocation = u'E:\\常熟溯源\\矢量\\常熟市溯源范围'
# 创建文件夹
# AOT文件
aot_Content = 'F:\\changshutraceresult\\aot'
try:
os.makedirs(aot_Content)
except:
arcpy.AddMessage('-------' + aot_Content + '已经存在')
path2Dir = os.listdir(zoneLocation)
for zonefile in path2Dir:
if zonefile[-4:].lower() == '.shp':
zone_Layer = os.path.join(zoneLocation, zonefile)
arcpy.AddMessage('-------' + name + ' 分区' + zonefile[-6:-4] +
' -------------------')
try:
# 剪裁
# Execute ExtractByMask
outClipRaster = os.path.join(
u'F:\\常熟溯源\\AOT\\裁剪',
'AOT裁剪分区' + zonefile[-6:-4] + '_' + name + '.tif')
arcpy.Clip_management(in_layer, "#", outClipRaster, zone_Layer,
"#", "ClippingGeometry",
"NO_MAINTAIN_EXTENT")
aotFeatures = os.path.join(
u'F:\\常熟溯源\\AOT\\shp',
'aot' + zonefile[-6:-4] + '_' + name + '.shp')
# 栅格转点
arcpy.RasterToPoint_conversion(outClipRaster, aotFeatures,
'VALUE')
arcpy.AddMessage(
'-------' + name + ' 分区' + zonefile[-6:-4] +
' RasterToPoint_conversion Success-------------------')
# 将AOT转为栅格，分辨率设为0.0005，参数设置如下
out_rasterdataset = os.path.join(
aot_Content,
'AOT分区' + zonefile[-6:-4] + '_' + name + '.tif')
arcpy.PointToRaster_conversion(aotFeatures, 'GRID_CODE',
out_rasterdataset, 'MAXIMUM',
'NONE', '0.00055')
except:
arcpy.AddMessage('-------' + name + ' 分区' + zonefile[-6:-4] +
'Clip_management 错误')
traceback.print_exc()
arcpy.AddMessage("------制作溯源文件完成")
def buildPointGrids(inFeature, tempRaster, cell_size, outShapefile):
# Convert from polygon to raster and raster to point to create point grid
arcpy.PolygonToRaster_conversion(inFeature, "OBJECTID", tempRaster, "CELL_CENTER", "NONE", cell_size)
# Determine if raster contains only NoData values
noData = int(arcpy.GetRasterProperties_management(tempRaster, 'ALLNODATA')[0])
if noData == 0:
# Convert raster to point grid
arcpy.RasterToPoint_conversion(tempRaster, outShapefile, "VALUE")
# Add XY Coordinates to feature class in the NAD_1983_Alaska_Albers projection
arcpy.AddXY_management(outShapefile)
# Delete intermediate files
arcpy.Delete_management(tempRaster)
elif noData == 1:
arcpy.AddMessage("All values for this watershed are nodata...")
# Delete intermediate files
arcpy.Delete_management(tempRaster)
def raster_to_point(ZSfile):
print "Converting zonal statistics raster to points..."
ZSpoints = "zs_points.shp"
if arcpy.Exists(ZSpoints):
arcpy.Delete_management(ZSpoints)
arcpy.RasterToPoint_conversion(ZSfile, ZSpoints, "Value")
print "Finished raster to points!\n"
bar['value'] = 60
bar.update()
spatial_join(ZSpoints)
def extract_selection(streamlines, section_counter, slope):
## arcpy.AddMessage("Buffering...")
streambuffers = os.path.join(env.workspace,
naming + "_buffers" + str(section_counter))
arcpy.Buffer_analysis(streamlines, streambuffers, "25 Meters")
## arcpy.AddMessage("Masking...")
masked = ExtractByMask(slope, streambuffers)
masked.save(
os.path.join(env.workspace,
naming + "_maskedraster" + str(section_counter)))
## arcpy.AddMessage("Converting to points...")
slope_points = os.path.join(env.workspace,
naming + "_slopepoints" + str(section_counter))
arcpy.RasterToPoint_conversion(masked, slope_points, "Value")
return slope_points
def TwoRas2OnePnt(dirRas,
magRas,
outFeature,
optArgs,
arrName1="DIR",
arrName2="MAG",
csizeMultiplier=1):
# uses either gdal or arcpy
# Create and save an ESRI point shapefile at pixel center coordinates
# with values from array of the same dimensions
#
espg = getModel_SR(optArgs['model'])
# Using GDAL
if optArgs['noArc']:
dirRas = dirRas + '.tif'
magRas = magRas + '.tif'
outFeature = outFeature + '.shp'
array1 = rasFile2array(dirRas)
array2 = rasFile2array(magRas)
Two_array2shp(array1, array2, outFeature, dirRas, "DIR", "MAG",
csizeMultiplier, espg)
# Using ArcPy
else:
if 'clp' in dirRas:
fgdb = optArgs['clpgdb']
else:
fgdb = optArgs['geodb']
arcpy.env.workspace = fgdb
arcpy.RasterToPoint_conversion(in_raster=dirRas,
out_point_features=outFeature,
raster_field=arrName1)
rasFldMap = magRas + ' ' + arrName2
arcpy.gp.ExtractMultiValuesToPoints_sa(outFeature, rasFldMap, "NONE")
if csizeMultiplier != 1:
express = "!Magnitude! * "+ str(csizeMultiplier)\
+ " * "+str(csizeMultiplier)
arcpy.CalculateField_management(in_table=outFeature,
field=arrName2,
expression=express,
expression_type="PYTHON_9.3",
code_block="#")
arcpy.env.workspace = optArgs['geodb']
def eachFile(shppath, filepath):
pathDir = os.listdir(filepath)
path_file_number = glob.glob(pathname=filepath + '\\*.tif')
path_file_number = bytes(len(path_file_number))
print "alter " + path_file_number + " files"
count = 0
for inRaster in pathDir:
outExtractByMask = ExtractByMask(outRaster, inMaskData)
outPoint = shppath + os.path.splitext(inRaster)[0] + ".shp"
field = "VALUE"
count += 1
if (os.path.exists(outPoint)):
print outPoint + " alderly exists!"
continue
print "exporting " + inRaster
arcpy.RasterToPoint_conversion(inRaster, outPoint, field)
print inRaster + " alderly exported"
file_number = bytes(count)
print "alderly exported " + file_number + " file"
print "success!"
def RasterToSurface(dem, out_fc, field):
if not arcpy.Exists(dem):
arcpy.AddIDMessage("ERROR", 110, dem)
raise SystemExit()
desc = arcpy.Describe(dem)
if desc.spatialReference.name == "Unknown":
arcpy.AddIDMessage("ERROR", 1024)
raise SystemExit()
InitParams(desc.spatialReference)
rowCount, colCount = desc.height, desc.width
arcpy.env.outputCoordinateSystem = desc.SpatialReference.GCS
result = arcpy.RasterToPoint_conversion(dem, "DEM2", "Value")
demArray = arcpy.da.FeatureClassToNumPyArray(result, ("SHAPE@X", "SHAPE@Y", "grid_code")).reshape(
(rowCount, colCount))
arcpy.Delete_management(result)
dtype = np.dtype([('X', '<f4'), ('Y', '<f4'), ('{0}'.format(field), '<f4')])
surfaceArray = np.zeros(((rowCount - 1) * 2, (colCount - 1)), dtype)
for row in xrange(0, rowCount - 1):
for col in xrange(0, colCount - 1):
pointA = demArray[row, col]
pointB = demArray[row, col + 1]
pointC = demArray[row + 1, col + 1]
pointD = demArray[row + 1, col]
xABC = (pointA[0] + pointB[0] + pointC[0]) / 3.0
yABC = (pointA[1] + pointB[1] + pointC[1]) / 3.0
sABC = CalcTriangleArea(pointA, pointB, pointC)
surfaceArray[row * 2, col] = (xABC, yABC, sABC)
xADC = (pointA[0] + pointD[0] + pointC[0]) / 3.0
yADC = (pointA[1] + pointD[1] + pointC[1]) / 3.0
sADC = CalcTriangleArea(pointA, pointD, pointC) # unit: km2
surfaceArray[row * 2 + 1, col] = (xADC, yADC, sADC)
arcpy.da.NumPyArrayToFeatureClass(surfaceArray.reshape((rowCount - 1) * (colCount - 1) * 2, ),
out_fc, ["X", "Y"], desc.spatialReference.GCS)
def create_lfp(self):
arcpy.gp.FocalStatistics_sa(self.i.cat, self.i.l_rng,
"Rectangle 1 1 CELL", "RANGE",
"DATA") # distance from boundaries
arcpy.gp.Con_sa(self.i.l_rng, self.i.cat, self.i.l_ild, "#",
"Value = 0")
arcpy.gp.IsNull_sa(self.i.l_ild, self.i.l_ild_n)
arcpy.gp.ExtractByMask_sa(self.i.l_ild_n, self.i.cat, self.i.l_ild_n_c)
arcpy.gp.Con_sa(self.i.l_ild_n_c, self.e.d, self.i.l_fnd, "#",
"Value = 0")
arcpy.gp.Fill_sa(self.i.l_fnd, self.i.l_fill, "")
arcpy.gp.FlowDirection_sa(self.i.l_fill, self.i.l_fdr, "NORMAL", "")
arcpy.gp.FlowLength_sa(self.i.l_fdr, self.i.l_fln, "DOWNSTREAM", "")
self.process_l_lmx()
arcpy.gp.EqualTo_sa(self.i.l_lmx, self.i.l_fln, self.i.l_lmx_fln)
arcpy.gp.Con_sa(self.i.l_lmx_fln, self.i.l_ild, self.i.l_mxp_r, "#",
"Value = 1")
arcpy.RasterToPoint_conversion(in_raster=self.i.l_mxp_r,
out_point_features=self.i.l_mxp_v,
raster_field="Value")
arcpy.CopyFeatures_management(in_features=self.i.l_mxp_v,
out_feature_class=self.i.generate_temps(
"v", "mxp"))
arcpy.DeleteIdentical_management(in_dataset=self.i.l_mxp_v,
fields="GRID_CODE",
xy_tolerance="",
z_tolerance="0")
arcpy.gp.CostPath_sa(self.i.l_mxp_v, self.i.fdr, self.i.fdr,
self.i.l_pth, "EACH_CELL",
"GRID_CODE") # main function
print "Please wait...",
if sleep(90) == None:
arcpy.gp.StreamToFeature_sa(self.i.l_pth, self.i.fdr, self.i.l_lfp,
"NO_SIMPLIFY")
arcpy.SpatialJoin_analysis(target_features=self.i.l_lfp,
join_features=self.i.catchment,
out_feature_class=self.i.l_spa,
join_operation="JOIN_ONE_TO_ONE",
join_type="KEEP_ALL",
match_option="HAVE_THEIR_CENTER_IN")
def processUrbanExtents(extents, popRaster, tempFolder, fieldPref="c"):
allCompactness = []
filesToDelete = []
#add two output fields
tryAddField(extents, "%sCom" % fieldPref, "FLOAT")
tryAddField(extents, "%sNCom" % fieldPref, "FLOAT")
with arcpy.da.UpdateCursor(
extents,
["OID@", "%sCom" % fieldPref,
"%sNCom" % fieldPref]) as cursor:
for featRow in cursor:
tRaster = os.path.join(tempFolder, "pop_%s" % featRow[0])
tRasterPoints = os.path.join(tempFolder,
"pop_%s_pts.shp" % featRow[0])
tLayer = "pop_%s" % featRow[0]
filesToDelete.append(tRaster)
filesToDelete.append(tRasterPoints)
filesToDelete.append(tRasterPoints)
arcpy.MakeFeatureLayer_management(extents, tLayer,
'"FID" = %s' % featRow[0])
#Use the current feature to extract the current raster
arcpy.Clip_management(popRaster, '#', tRaster, tLayer, '0',
'ClippingGeometry', 'MAINTAIN_EXTENT')
try:
arcpy.RasterToPoint_conversion(tRaster, tRasterPoints)
compactness = main(tRasterPoints, "GRID_CODE", tempFolder)
featRow[1] = compactness[0]
featRow[2] = compactness[1]
except:
tPrint("Something went wrong with feature %s" % featRow[0])
featRow[1] = 0
featRow[2] = 0
cursor.updateRow(featRow)
for f in filesToDelete:
arcpy.Delete_management(f)
return (allCompactness)
def attributeESApoints(cntry, outFeatures, outDB, ntlFile, lcRaster, ghslValu, globalOutlines):
tempLC = "%s/%s" % (outDB,"ESA2009")
tempPts = "%s/%s" % (outDB,"tPts")
tempAdmin = "%s/%s" % (outDB, "Admin1")
arcpy.Select_analysis(in_features=globalOutlines, out_feature_class=tempAdmin, where_clause=""""ISO3" = '%s'""" % cntry)
tPrint("***Created Admin File")
arcpy.Clip_management(in_raster=lcRaster, rectangle="", out_raster=tempLC, in_template_dataset=tempAdmin, nodata_value="0", clipping_geometry="ClippingGeometry")
tPrint("***Clipped ESA Globcover")
arcpy.RasterToPoint_conversion(in_raster=tempLC, out_point_features=tempPts, raster_field="Value")
renameField(tempPts, "grid_code", "Globcover")
tPrint("***Converted to points")
ExtractValuesToPoints(tempPts, ntlFile, outFeatures, "NONE", "VALUE_ONLY")
renameField(outFeatures, "RASTERVALU", "NTL")
tPrint("***Extracted NTL Values")
fOut = outFeatures.replace("Globcover", "Globcover_GHSL")
arcpy.sa.ExtractValuesToPoints(outFeatures, ghslValu, fOut)
renameField(fOut, "RASTERVALU", "GHSL")
arcpy.Delete_management(outFeatures)
arcpy.Rename_management(fOut, outFeatures)
def main(argv=None):
"""Iterate over LM, BM, and restoration tasks."""
if argv is None:
argv = sys.argv # Get parameters from ArcGIS tool dialog
start_time = time.clock()
# USER SETTINGS ######################################################
# Restoration Settings
# ALL input data must be in the same projection
# Set to True to restore highest ROI. Set to False to restore strongest
# barrier
restore_max_roi = argv[1]
# Resistance value of restored habitat. Must be 1 or greater.
restored_resistance_val = argv[2]
# No spaces or special chars in paths or gdb names
restoration_data_gdb = argv[3]
# No spaces in path, avoid using dropbox or network drive
# Project directories will be created in this (iter1, iter2...) as will an
# output geodatabase
output_dir = argv[4]
# Resistance raster. Should be in input GDB
resistance_ras = argv[5]
# Core area feature class. Should be in input GDB 'URWA_HCAs_Doug_Grant'
core_fc = argv[6]
core_fn = argv[7] # Core area field name
radius = argv[8] # Restoration radius in meters
iterations = argv[9] # Number of restorations to perform
# If less than this proportion of ag in circle, don't consider restoring
# circle
min_ag_threshold = argv[10]
# Don't consider barriers below this improvement score (average improvement
# per meter diameter restored)
min_improvement_val = argv[11]
# Average per-m2 parcel cost per pixel. Snapped to resistance raster.
parcel_cost_ras = argv[12]
# Right now this is just a raster with all pixels set to 0.113174
restoration_cost_ras = argv[13]
ag_ras = argv[14] # 1=Ag, 0=Not Ag
# Some restorations benefit multiple corridors.
# 'Maximum' takes the greatest improvement across core area pairs
# 'Sum' adds improvement scores acreoss all pairs.
barrier_combine_method = argv[15]
# Use cwd_thresh = None for no threshold. Use cwd_thresh = X to not
# consider restorations more than X map units away from each core area.
cwd_thresh = argv[16]
# END USER SETTINGS ######################################################
try:
# Setup path and create directories
gprint('Hey! Make sure everything is in the same projection!\n')
gprint('Setting up paths and creating directories')
sys.path.append('..\\toolbox\\scripts')
res_ras = os.path.join(restoration_data_gdb, resistance_ras)
core_fc_path = os.path.join(restoration_data_gdb, core_fc)
# Set up a NEW output gdb (leave previous ones on drive)
i = None
for i in range(1, 200):
output_gdb = 'restorationOutput' + str(i) + '.gdb'
if not arcpy.Exists(os.path.join(output_dir, output_gdb)):
break
gprint('Previous output GDB ' + output_gdb + ' exists. '
'Delete to save disk space.')
arcpy.CreateFileGDB_management(output_dir, output_gdb)
output_gdb = os.path.join(output_dir, output_gdb)
log_file = os.path.join(output_gdb,
'Iterate Barriers' + str(i) + '.py')
# Write a copy of this file to output dir as a record of settings
shutil.copyfile(__file__, log_file)
arcpy.env.cellSize = res_ras
arcpy.env.extent = res_ras
arcpy.env.snapRaster = res_ras
arcpy.env.overwriteOutput = True
arcpy.env.scratchWorkspace = output_gdb
arcpy.env.workspace = output_gdb
spatialref = arcpy.Describe(res_ras).spatialReference
mapunits = spatialref.linearUnitName
gprint('Cell size = ' + str(arcpy.env.cellSize) + ' ' + mapunits + 's')
# Calculate fraction of ag within radius of each pixel
gprint('Calculating purchase cost, fraction of ag, etc within radius '
'of each pixel.')
ag_ras = os.path.join(restoration_data_gdb, ag_ras)
in_neighborhood = arcpy.sa.NbrCircle(radius, "MAP")
arcpy.env.extent = ag_ras
out_focal_stats = arcpy.sa.FocalStatistics(ag_ras, in_neighborhood,
"MEAN", "NODATA")
proportion_ag_ras = os.path.join(output_gdb, 'proportionAgRas')
out_focal_stats.save(proportion_ag_ras)
arcpy.env.extent = res_ras
# Calculate purchase cost of circles
parcel_cost_ras = os.path.join(restoration_data_gdb, parcel_cost_ras)
arcpy.env.extent = parcel_cost_ras
out_focal_stats = arcpy.sa.FocalStatistics(parcel_cost_ras,
in_neighborhood, "MEAN",
"DATA")
cost_focal_stats_ras = os.path.join(output_gdb, 'cost_focal_stats_ras')
out_focal_stats.save(cost_focal_stats_ras)
arcpy.env.extent = res_ras
circle_area = float(npy.pi * radius * radius)
outras = arcpy.sa.Raster(cost_focal_stats_ras) * circle_area
purch_cost_ras = os.path.join(output_gdb, 'purchaseCostRaster')
outras.save(purch_cost_ras)
lu.delete_data(cost_focal_stats_ras)
restoration_cost_ras = os.path.join(restoration_data_gdb,
restoration_cost_ras)
outras = (
arcpy.sa.Raster(purch_cost_ras) +
(arcpy.sa.Raster(restoration_cost_ras) * radius * radius * npy.pi))
total_cost_ras = os.path.join(output_gdb, 'totalCostRaster')
outras.save(total_cost_ras)
# Create mask to remove areas without cost data
arcpy.env.extent = total_cost_ras
cost_mask_ras = os.path.join(output_gdb, 'costMaskRaster')
cost_thresh = 0
out_con = arcpy.sa.Con(
(arcpy.sa.Raster(total_cost_ras) > float(cost_thresh)), 1)
out_con.save(cost_mask_ras)
arcpy.env.extent = res_ras
# Create mask to remove areas below ag threshold
out_con = arcpy.sa.Con(
(arcpy.sa.Raster(proportion_ag_ras) > float(min_ag_threshold)), 1)
ag_mask_ras = os.path.join(output_gdb, 'agMaskRaster')
out_con.save(ag_mask_ras)
do_step_1 = 'true'
do_step_2 = 'true'
do_step_5 = 'false'
all_restored_areas_ras = ''
for cur_iter in range(1, iterations + 1):
start_time1 = time.clock()
# Some env settings get changed by linkage mapper and must be
# reset here
arcpy.env.cellSize = res_ras
arcpy.env.extent = res_ras
arcpy.env.snapRaster = res_ras
arcpy.env.scratchWorkspace = output_gdb
arcpy.env.workspace = output_gdb
lu.dashline(1)
gprint('Running iteration number ' + str(cur_iter))
proj_dir = os.path.join(output_dir,
'iter' + str(cur_iter) + 'Proj')
lu.create_dir(output_dir)
lu.delete_dir(proj_dir)
lu.create_dir(proj_dir)
if cur_iter > 1: # Copy previous s2 linktable to new project dir
datapass_dir = os.path.join(proj_dir, 'datapass')
lu.create_dir(datapass_dir)
proj_dir1 = os.path.join(output_dir, 'iter1Proj')
datapass_dir_iter1 = os.path.join(proj_dir1, 'datapass')
s2_link_tbl_iter1 = os.path.join(datapass_dir_iter1,
'linkTable_s2.csv')
s2_link_tbl = os.path.join(datapass_dir, 'linkTable_s2.csv')
shutil.copyfile(s2_link_tbl_iter1, s2_link_tbl)
# Run Linkage Mapper
# Copy distances text file from earlier LM run to the output
# directory- speeds things up!
dist_file = os.path.join(output_dir, core_fc + '_dists.txt')
if not os.path.exists(dist_file):
if cur_iter == 1:
gprint('Will calculate distance file.')
dist_file = '#'
else:
proj_dir1 = os.path.join(output_dir, 'iter1Proj')
dist_file1 = os.path.join(proj_dir1,
core_fc + '_dists.txt')
# Put a copy here for future runs
shutil.copyfile(dist_file1, dist_file)
arcpy.env.scratchWorkspace = output_gdb
arcpy.env.workspace = output_gdb
argv = ('lm_master.py', proj_dir, core_fc_path, core_fn, res_ras,
do_step_1, do_step_2, 'Cost-Weighted & Euclidean',
dist_file, 'true', 'true', 'false', '4', 'Cost-Weighted',
'true', do_step_5, 'true', '200000', '10000', '#', '#',
'#', '#')
gprint('Running ' + str(argv))
lm_master.lm_master(argv)
do_step_1 = 'false' # Can skip for future iterations
do_step_2 = 'false' # Can skip for future iterations
do_step_5 = 'false' # Skipping for future iterations
start_radius = str(radius)
end_radius = str(radius)
radius_step = '0'
save_radius_ras = 'false'
write_pct_ras = 'false'
argv = ('barrier_master.py', proj_dir, res_ras, start_radius,
end_radius, radius_step, barrier_combine_method,
save_radius_ras, write_pct_ras, cwd_thresh)
gprint('Running ' + str(argv))
barrier_master.bar_master(argv)
# Some env settings get changed by linkage mapper and must be
# reset here
arcpy.env.cellSize = res_ras
arcpy.env.extent = res_ras
arcpy.env.snapRaster = res_ras
arcpy.env.scratchWorkspace = output_gdb
arcpy.env.workspace = output_gdb
gprint('Finding restoration circles with max barrier score / ROI')
# Find points with max ROI
prefix = os.path.basename(proj_dir)
if barrier_combine_method == 'Sum':
sum_suffix = 'Sum'
else:
sum_suffix = ''
barrier_fn = (prefix + "_BarrierCenters" + sum_suffix + "_Rad" +
str(radius))
barrier_ras = os.path.join(proj_dir, 'output', 'barriers.gdb',
barrier_fn)
if not arcpy.Exists(barrier_ras):
msg = ('Error: cannot find barrier output: ' + barrier_ras)
lu.raise_error(msg)
if cur_iter > 1:
gprint('Creating mask for previously restored areas')
in_neighborhood = arcpy.sa.NbrCircle(radius, "MAP")
arcpy.env.extent = all_restored_areas_ras
out_focal_stats = arcpy.sa.FocalStatistics(
all_restored_areas_ras, in_neighborhood, "MEAN", "DATA")
all_restored_focal_ras = os.path.join(
output_gdb, 'allRestFocRas_iter' + str(cur_iter))
# Anything > 0 would include a restored area
out_focal_stats.save(all_restored_focal_ras)
arcpy.env.extent = res_ras
rest_mask_ras = os.path.join(
output_gdb, 'restMaskRaster_iter' + str(cur_iter))
minval = 0
out_con = arcpy.sa.Con(
(arcpy.sa.Raster(all_restored_focal_ras) == float(minval)),
1)
out_con.save(rest_mask_ras)
# Candidate areas have not been restored, have cost data, meet
# minimum improvement score criteria, and have enough ag in them
candidate_barrier_ras = os.path.join(
output_gdb, 'candidateBarrierRaster' + '_iter' + str(cur_iter))
if cur_iter > 1:
gprint('Creating candidate restoration raster using barrier '
'results, previous restorations, and selection '
'criteria')
# ROI scores will be in terms of total improvement
# (= score * diameter)
out_calc = (arcpy.sa.Raster(cost_mask_ras) *
arcpy.sa.Raster(ag_mask_ras) *
arcpy.sa.Raster(barrier_ras) *
arcpy.sa.Raster(rest_mask_ras) * (radius * 2))
else:
out_calc = (arcpy.sa.Raster(cost_mask_ras) *
arcpy.sa.Raster(ag_mask_ras) *
arcpy.sa.Raster(barrier_ras) * radius * 2)
min_barrier_score = min_improvement_val * radius * 2
if restored_resistance_val != 1:
out_calc_2 = (out_calc - (2 * radius *
(restored_resistance_val - 1)))
out_con = arcpy.sa.Con(
(out_calc_2 >= float(min_barrier_score)), out_calc_2)
else:
out_con = arcpy.sa.Con((out_calc >= float(min_barrier_score)),
out_calc)
out_con.save(candidate_barrier_ras)
lu.build_stats(candidate_barrier_ras)
purchase_roi_ras = os.path.join(
output_gdb, 'purchaseRoiRaster' + '_iter' + str(cur_iter))
out_calc = (arcpy.sa.Raster(candidate_barrier_ras) /
arcpy.sa.Raster(purch_cost_ras))
out_calc.save(purchase_roi_ras)
lu.build_stats(purchase_roi_ras)
total_roi_ras = os.path.join(
output_gdb, 'purchaseRestRoiRaster' + '_iter' + str(cur_iter))
out_calc = (arcpy.sa.Raster(candidate_barrier_ras) /
arcpy.sa.Raster(total_cost_ras))
out_calc.save(total_roi_ras)
lu.build_stats(total_roi_ras)
max_barrier = float(
arcpy.GetRasterProperties_management(candidate_barrier_ras,
"MAXIMUM").getOutput(0))
gprint('Maximum barrier improvement score: ' + str(max_barrier))
if max_barrier < 0:
arcpy.AddWarning("\nNo barriers found that meet CWD or Ag "
"threshold criteria.")
max_purch_roi = arcpy.GetRasterProperties_management(
purchase_roi_ras, "MAXIMUM")
gprint('Maximum purchase ROI score: ' +
str(max_purch_roi.getOutput(0)))
max_roi = arcpy.GetRasterProperties_management(
total_roi_ras, "MAXIMUM")
gprint('Maximum total ROI score: ' + str(max_roi.getOutput(0)))
if restore_max_roi:
out_point = os.path.join(
output_gdb, 'maxRoiPoint' + '_iter' + str(cur_iter))
gprint('Choosing circle with maximum ROI to restore')
out_con = arcpy.sa.Con(
(arcpy.sa.Raster(total_roi_ras) >= float(
max_roi.getOutput(0))), total_roi_ras)
max_roi_ras = os.path.join(output_gdb, 'max_roi_ras')
out_con.save(max_roi_ras)
# Save max ROI to point
try:
arcpy.RasterToPoint_conversion(max_roi_ras, out_point)
except Exception:
msg = ('Error: it looks like there are no viable '
'restoration candidates.')
lu.raise_error(msg)
else: # Restoring strongest barrier instead
out_point = os.path.join(
output_gdb, 'maxBarrierPoint' + '_iter' + str(cur_iter))
gprint('Choosing circle with maximum BARRIER IMPROVEMENT SCORE'
' to restore')
out_con = arcpy.sa.Con(
(arcpy.sa.Raster(candidate_barrier_ras) >= max_barrier),
candidate_barrier_ras)
max_barrier_ras = os.path.join(output_gdb, 'maxBarrierRaster')
out_con.save(max_barrier_ras)
# Save max barrier to point
try:
arcpy.RasterToPoint_conversion(max_barrier_ras, out_point)
except Exception:
msg = ('Error: it looks like there are no viable '
'restoration candidates.')
lu.raise_error(msg)
gprint('Done evaluating candidate restorations')
result = int(arcpy.GetCount_management(out_point).getOutput(0))
if result > 1:
# Would be better to retain point with max barrier score when
# we have multiple points with same ROI
arcpy.AddWarning('Deleting points with identical '
'ROI/improvement score values')
arcpy.DeleteIdentical_management(out_point, "grid_code", 0.1,
0.1)
arcpy.sa.ExtractMultiValuesToPoints(
out_point,
[[candidate_barrier_ras, "barrierScore"],
[purch_cost_ras, "purchCost"], [total_cost_ras, "totalCost"],
[purchase_roi_ras, "purchaseROI"],
[total_roi_ras, "totalROI"]], "NONE")
arcpy.AddField_management(out_point, "restorationNumber", "SHORT")
arcpy.CalculateField_management(out_point, "restorationNumber",
cur_iter, "PYTHON_9.3")
arcpy.AddField_management(out_point, "radius", "DOUBLE")
arcpy.CalculateField_management(out_point, "radius", radius,
"PYTHON_9.3")
arcpy.AddField_management(out_point, "barrierScore_per_m",
"DOUBLE")
arcpy.CalculateField_management(
out_point, "barrierScore_per_m",
"(float(!barrierScore!) / (!radius! * 2))", "PYTHON_9.3")
gprint('\nCreating restoration circles')
if restore_max_roi:
circle_fc = os.path.join(
output_gdb, 'maxRoiCircle' + '_iter' + str(cur_iter))
else:
circle_fc = os.path.join(
output_gdb, 'maxBarrierCircle' + '_iter' + str(cur_iter))
arcpy.Buffer_analysis(out_point, circle_fc, radius)
gprint('Rasterizing restoration circles')
if restore_max_roi:
circle_ras = os.path.join(
output_gdb, 'maxRoicircle_ras' + '_iter' + str(cur_iter))
else:
circle_ras = os.path.join(
output_gdb,
'maxBarrierCircleRas' + '_iter' + str(cur_iter))
arcpy.FeatureToRaster_conversion(circle_fc, 'totalROI', circle_ras,
arcpy.env.cellSize)
# restore raster
gprint('Digitally restoring resistance raster')
res_ras_restored = os.path.join(
output_gdb, 'resRastRestored' + '_iter' + str(cur_iter))
out_con = arcpy.sa.Con(arcpy.sa.IsNull(circle_ras), res_ras,
restored_resistance_val)
out_con.save(res_ras_restored)
all_restored_areas_ras = os.path.join(
output_gdb, 'allRestoredAreas_iter' + str(cur_iter))
prev_restored_areas_ras = os.path.join(
output_gdb, 'allRestoredAreas_iter' + str(cur_iter - 1))
if cur_iter == 1:
out_con = arcpy.sa.Con(arcpy.sa.IsNull(circle_ras), 0, 1)
else:
# Add this restoration to areas restored
out_con = arcpy.sa.Con(arcpy.sa.IsNull(circle_ras),
prev_restored_areas_ras, 1)
out_con.save(all_restored_areas_ras)
lu.delete_data(circle_ras)
# Use for next iteration resistance raster
res_ras = res_ras_restored
# Add circle into feature class with all circles
if restore_max_roi:
all_circles_fc = os.path.join(output_gdb, "allCirclesMaxROI")
else:
all_circles_fc = os.path.join(output_gdb,
"allCirclesMaxBarriers")
if cur_iter == 1:
arcpy.CopyFeatures_management(circle_fc, all_circles_fc)
else:
arcpy.Append_management(circle_fc, all_circles_fc, "TEST")
gprint('Finished iteration #' + str(cur_iter))
start_time1 = lu.elapsed_time(start_time1)
gprint('\nDone with iterations.')
start_time = lu.elapsed_time(start_time)
gprint('Outputs saved in: ' + output_gdb)
gprint('Back up your project directories if you want to save '
'corridor/barrier results.')
# Return GEOPROCESSING specific errors
except arcpy.ExecuteError:
lu.dashline(1)
gprint('****Iteration script failed. Details follow.****')
lu.exit_with_geoproc_error(_SCRIPT_NAME)
# Return any PYTHON or system specific errors
except Exception:
lu.dashline(1)
gprint('****Iteration script failed. Details follow.****')
lu.exit_with_python_error(_SCRIPT_NAME)
## Process: Clip raster - https://desktop.arcgis.com/en/arcmap/latest/tools/data-management-toolbox/clip.htm
print 'Clipping raster - rectangular extent...'
#arcpy.gp.ExtractByMask_sa(RASTER, Basin_Boundary, Basin_Raster)
arcpy.Clip_management(RASTER, "#", Basin_Raster, Basin_Boundary, "", "NONE","NO_MAINTAIN_EXTENT")
## Process: Resample apriori raster - https://desktop.arcgis.com/en/arcmap/10.3/tools/data-management-toolbox/resample.htm
print 'Resampling basin raster...'
arcpy.Resample_management(Basin_Raster, Basin_Raster_resamp, "0.01 0.01", "NEAREST")
## Process: Clip raster to basin boundary
print 'Extracting by mask - basin boundary...'
arcpy.Clip_management(Basin_Raster_resamp, "#", Basin_Raster_resamp_clip, Basin_Boundary, "", "ClippingGeometry","NO_MAINTAIN_EXTENT")
## Process: Raster to Point
print 'Raster to point...'
arcpy.RasterToPoint_conversion(Basin_Raster_resamp_clip, Basin_Points, "VALUE")
#
## Process: Export Feature Attribute to ASCII
print 'Export attributes to text...'
arcpy.ExportXYv_stats(Basin_Points + '.shp', "GRID_CODE", "COMMA", Out_text, "ADD_FIELD_NAMES")
if snow == 'on':
# list all Snow17 grids (directories containing data only) #ignore extra files in directory
all_snow = [ name for name in os.listdir(SNOW17_Grids_Folder) if os.path.isdir(os.path.join(SNOW17_Grids_Folder, name)) ]
all_snow.remove('info') # remove info directory from list of variables
for variable in all_snow:
print ch5id + ' --> ' + variable
Out_text = output_dir + '\\' + ch5id + '\\' + ch5id + '_' + variable + '.txt'
## Local variables:
RASTER = SNOW17_Grids_Folder + '\\' + variable
# Run z-value function along channel axis
z_raster_array = np.apply_along_axis(return_z_value, 2, rgb_raster_array,
ranges, no_data)
z_raster = arcpy.NumPyArrayToRaster(z_raster_array, lower_left, cell_width,
cell_height, no_data)
arcpy.AddMessage(
"NumPy array re-stacked and z-value function ran across channel axis")
# Create paths
out_raster = os.path.join(workspace, "RGBtoZ_Ras")
out_points = os.path.join(workspace, "RGBtoZ_Pnt")
# Define raster, convert to points and save both outputs
arcpy.CopyRaster_management(z_raster, out_raster)
arcpy.DefineProjection_management(out_raster, sr)
arcpy.RasterToPoint_conversion(out_raster, out_points)
except CompositeImage:
error = "A RGB (3-band) composite image must be used."
arcpy.AddError(error)
print error
except GeorectifiedImage:
error = "Raster must be projected"
arcpy.AddError(error)
print error
except FileFormat:
error = "Incorrect text file format. See instructions"
arcpy.AddError(error)
print error
