class StackCells(swing.JFrame):
def __init__(self):
swing.JFrame.__init__(self, title="Stack Cells")
self.__impD = IJ.getImage()
self.setDefaultCloseOperation(swing.JFrame.DISPOSE_ON_CLOSE)
self.__n=0
self.__widthl = "11"
self.__iplist = []
self.__init = False
self.__initDIA = False
self.__initFLUO = False
self.__skip = False
self.__avg = True
self.__mosa = True
self.__maxfinder = True
self.__appmedian = True
self.__fire = True
self.__align = True
self.__alignC = False
self.__enlarge = True
self.__measures = True
self.__sens = []
self.__listrois = []
self.__cellsrois = []
self.__Cutoff = 0
self.__labels = []
self.__maxraf = 100.0
self.__minraf = 0.0
self.__conEllipses = False
self.__dictCells = {}
self.__rm = RoiManager.getInstance()
if (self.__rm==None): self.__rm = RoiManager()
self.run()
def run(self) :
self.size=(1100, 400)
self.contentPane.layout = awt.BorderLayout()
self.__display = swing.JTextField(preferredSize=(400, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__setDisplay()
line = BorderFactory.createEtchedBorder(EtchedBorder.LOWERED)
northpanel1=swing.JPanel(awt.FlowLayout(awt.FlowLayout.LEFT))
northpanel1.setBorder(line)
northpanel1.add(self.__display)
new = swing.JButton("New", size=(100, 70), actionPerformed=self.__new)
northpanel1.add(new)
add = swing.JButton("Add", size=(100, 70), actionPerformed=self.__add)
northpanel1.add(add)
roiman = swing.JButton("Add Roi manager", size=(100, 70), actionPerformed= self.__addroi)
northpanel1.add(roiman)
end = swing.JButton("End", size=(100, 70), actionPerformed= self.__end)
northpanel1.add(end)
#grid = awt.GridLayout()
#grid.setRows(2)
#northpanel=swing.JPanel(grid)
#northpanel.add(northpanel1)
#northpanel2=swing.JPanel(awt.FlowLayout(awt.FlowLayout.LEFT))
grid0 = awt.GridLayout()
grid0.setRows(6)
northpanel2=swing.JPanel(grid0)
northpanel2.setBorder(line)
label=swing.JLabel("Label2")
label.setText("Line width ?")
northpanel2.add(label)
self.__display2 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display2.text = "11"
northpanel2.add(self.__display2)
label=swing.JLabel("Label3")
label.setText("Noise for peaks ?")
northpanel2.add(label)
self.__display3 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display3.text = "100"
northpanel2.add(self.__display3)
label=swing.JLabel("Label4")
label.setText("Fluo threshold ?")
northpanel2.add(label)
self.__display4 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display4.text = "170"
northpanel2.add(self.__display4)
#northpanel3=swing.JPanel(awt.FlowLayout(awt.FlowLayout.LEFT))
#northpanel3.setBorder(line)
label=swing.JLabel("Label5")
label.setText("Min of length ?")
northpanel2.add(label)
self.__display5 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display5.text = "50"
northpanel2.add(self.__display5)
label=swing.JLabel("Label6")
label.setText("Max of length ?")
northpanel2.add(label)
self.__display6 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display6.text = "500"
northpanel2.add(self.__display6)
dia = swing.JButton("DIA", size=(100, 70), actionPerformed= self.__dia)
northpanel2.add(dia)
fluo = swing.JButton("FLUO", size=(100, 70), actionPerformed= self.__fluo)
northpanel2.add(fluo)
southpanel=swing.JPanel(awt.FlowLayout(awt.FlowLayout.RIGHT))
southpanel.setBorder(line)
help = swing.JButton("Help", size=(100, 70), actionPerformed=self.__help)
self.__label=swing.JLabel("Label")
southpanel.add(self.__label)
close = swing.JButton("Close", size=(100, 70), actionPerformed=self.__close)
southpanel.add(help)
southpanel.add(close)
grid = awt.GridLayout()
grid.setRows(4)
checkpanel=swing.JPanel(grid)
checkpanel.setBorder(line)
self.__box0=swing.JCheckBox(actionPerformed=self.__boxaction0)
self.__box0.setText("Skip failed ROIs")
self.__box0.setSelected(False)
self.__box1=swing.JCheckBox(actionPerformed=self.__boxaction1)
self.__box1.setText("Mosaic")
self.__box1.setSelected(True)
self.__box2=swing.JCheckBox(actionPerformed=self.__boxaction2)
self.__box2.setText("Mean Projection")
self.__box2.setSelected(True)
self.__box3=swing.JCheckBox(actionPerformed=self.__boxaction3)
self.__box3.setText("Max Finder")
self.__box3.setSelected(True)
self.__box4=swing.JCheckBox(actionPerformed=self.__boxaction4)
self.__box4.setText("Median filter")
self.__box4.setSelected(True)
self.__box5=swing.JCheckBox(actionPerformed=self.__boxaction5)
self.__box5.setText("Fire LUT")
self.__box5.setSelected(True)
self.__box6=swing.JCheckBox(actionPerformed=self.__boxaction6)
self.__box6.setText("Auto Align Left")
self.__box6.setSelected(True)
self.__box7=swing.JCheckBox(actionPerformed=self.__boxaction7)
self.__box7.setText("Auto Enlarge")
self.__box7.setSelected(True)
self.__box8=swing.JCheckBox(actionPerformed=self.__boxaction8)
self.__box8.setText("Measures")
self.__box8.setSelected(True)
self.__box9=swing.JCheckBox(actionPerformed=self.__boxaction9)
self.__box9.setText("Auto Align Center")
self.__box9.setSelected(False)
self.__box10=swing.JCheckBox(actionPerformed=self.__boxaction10)
self.__box10.setText("Use ellipses")
self.__box10.setSelected(False)
checkpanel.add(self.__box0)
checkpanel.add(self.__box1)
checkpanel.add(self.__box2)
checkpanel.add(self.__box3)
checkpanel.add(self.__box4)
checkpanel.add(self.__box5)
checkpanel.add(self.__box6)
checkpanel.add(self.__box7)
checkpanel.add(self.__box8)
checkpanel.add(self.__box9)
checkpanel.add(self.__box10)
grid = awt.GridLayout()
grid.setRows(10)
checkpanel2=swing.JPanel(grid)
checkpanel2.setBorder(line)
label=swing.JLabel("Label7")
label.setText("Max of Solidity")
checkpanel2.add(label)
self.__display7 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display7.text = "1"
checkpanel2.add(self.__display7)
label=swing.JLabel("Label8")
label.setText("Min of Solidity")
checkpanel2.add(label)
self.__display8 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display8.text = "0"
checkpanel2.add(self.__display8)
label=swing.JLabel("Label9")
label.setText("Max of Area")
checkpanel2.add(label)
self.__display9 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display9.text = "1447680"
checkpanel2.add(self.__display9)
label=swing.JLabel("Label10")
label.setText("Min of Area")
checkpanel2.add(label)
self.__display10 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display10.text = "1"
checkpanel2.add(self.__display10)
label=swing.JLabel("Label11")
label.setText("Max of Circ")
checkpanel2.add(label)
self.__display11 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display11.text = "1"
checkpanel2.add(self.__display11)
label=swing.JLabel("Label12")
label.setText("Min of Circ")
checkpanel2.add(label)
self.__display12 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display12.text = "0"
checkpanel2.add(self.__display12)
label=swing.JLabel("Label13")
label.setText("Max of AR")
checkpanel2.add(label)
self.__display13 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display13.text = "1392"
checkpanel2.add(self.__display13)
label=swing.JLabel("Label14")
label.setText("Min of AR")
checkpanel2.add(label)
self.__display14 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display14.text = "1"
checkpanel2.add(self.__display14)
label=swing.JLabel("Label15")
label.setText("Max of Feret")
checkpanel2.add(label)
self.__display15 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display15.text = "1392"
checkpanel2.add(self.__display15)
label=swing.JLabel("Label16")
label.setText("Min of Feret")
checkpanel2.add(label)
self.__display16 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display16.text = "1"
checkpanel2.add(self.__display16)
label=swing.JLabel("Label17")
label.setText("Max of Mean")
checkpanel2.add(label)
self.__display17 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display17.text = "65535"
checkpanel2.add(self.__display17)
label=swing.JLabel("Label18")
label.setText("Min of Mean")
checkpanel2.add(label)
self.__display18 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display18.text = "0"
checkpanel2.add(self.__display18)
label=swing.JLabel("Label19")
label.setText("max ratio Axis/Feret")
checkpanel2.add(label)
self.__display19 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display19.text = str(self.__maxraf)
checkpanel2.add(self.__display19)
label=swing.JLabel("Label20")
label.setText("Min ratio Axis/Feret")
checkpanel2.add(label)
self.__display20 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display20.text = str(self.__minraf)
checkpanel2.add(self.__display20)
label=swing.JLabel("Label21")
label.setText("Max MinFeret")
checkpanel2.add(label)
self.__display21 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display21.text = "1392"
checkpanel2.add(self.__display21)
label=swing.JLabel("Label22")
label.setText("Min MinFeret")
checkpanel2.add(label)
self.__display22 = swing.JTextField(preferredSize=(50, 30), horizontalAlignment=swing.SwingConstants.LEFT)
self.__display22.text = "1"
checkpanel2.add(self.__display22)
self.contentPane.add(northpanel1, awt.BorderLayout.NORTH)
self.contentPane.add(checkpanel, awt.BorderLayout.WEST)
self.contentPane.add(northpanel2, awt.BorderLayout.CENTER)
self.contentPane.add(southpanel, awt.BorderLayout.SOUTH)
self.contentPane.add(checkpanel2, awt.BorderLayout.EAST)
def __close(self, event):
self.oked = True
time.sleep(0.01)
self.dispose()
def __new(self, event):
self.__init = True
self.__n += 1
self.__name = "stackcells"+str(self.__n)
self.__display.text = self.__name
self.__sens[:] = []
self.__listrois[:] = []
self.__iplist[:] = []
self.__cellsrois[:] = []
self.__labels[:] = []
def __add(self, event):
if ( not self.__init) :
IJ.showMessage("", "please start a new stack")
return
if ( not self.__initDIA) :
IJ.showMessage("", "please select an image for DIA")
return
if ( not self.__initFLUO) :
IJ.showMessage("", "please select an image for FLUO")
return
self.__widthl = self.__display2.getText()
roi = self.__impD.getRoi()
if roi == None :
IJ.showMessage("", "No selection")
return
if roi.getType() in [6,7] :
nslice = self.__impD.getCurrentSlice()
self.__impF.setSlice(nslice)
self.__impF.setRoi(roi)
elif roi.getType() in [2,4] :
nslice = self.__impD.getCurrentSlice()
self.__impF.setSlice(nslice)
m=Morph(self.__impF, roi)
m.setMidParams(10, 2)
roi=m.MidAxis
if roi == None :
self.__display.text = "roi fail"
if not self.__skip : IJ.showMessage("", "failed roi, please draw it as polyline")
return
#if roi.getType() != 6 : self.__impF.setRoi(roi)
else :
IJ.showMessage("", "This selection is not yet allowed")
return
self.__impF.setRoi(roi)
straightener = Straightener()
new_ip = straightener.straighten(self.__impF, roi, int(self.__widthl))
self.__iplist.append(new_ip)
self.__labels.append(self.__isF.getShortSliceLabel(nslice))
self.__display.text = self.__name + " cell " + str(len(self.__iplist)) +" width="+str(new_ip.getWidth())+ " height="+ str(new_ip.getHeight())
roi.setPosition(self.__impD.getCurrentSlice())
self.__rm = RoiManager.getInstance()
if (self.__rm==None): self.__rm = RoiManager()
self.__rm.add(self.__impD, roi, len(self.__iplist))
self.__cellsrois.append((roi, self.__impD.getCurrentSlice()))
#self.__rm.runCommand("Show All")
IJ.selectWindow(self.__impD.getTitle())
def __end(self, event):
if len(self.__iplist)==0 :
IJ.showMessage("", "Stack is empty")
return
self.__ipw=[ ip.getWidth() for ip in self.__iplist ]
self.__iph=[ ip.getHeight() for ip in self.__iplist ]
maxw=max(self.__ipw)
maxh=max(self.__iph)
if self.__enlarge :
resizelist = [ ip.resize(maxw, maxh, True) for ip in self.__iplist ]
else :
resizelist = []
for ip in self.__iplist :
tempip = ShortProcessor(maxw, maxh)
tempip.copyBits(ip, 0, 0, Blitter.COPY)
resizelist.append(tempip)
ims = ImageStack(maxw, maxh)
#for ip in resizelist : ims.addSlice("", ip)
for i in range(len(resizelist)) :
ims.addSlice(self.__labels[i], resizelist[i])
self.__impRes = ImagePlus(self.__name, ims)
self.__impRes.show()
self.__sens = [1 for i in range(len(self.__iplist)) ]
if self.__appmedian : IJ.run(self.__impRes, "Median...", "radius=1 stack")
if self.__align : self.__falign()
if self.__avg : self.__favg()
if self.__mosa : self.__fmosa()
if self.__maxfinder : self.__fmaxfinder()
if self.__fire : IJ.run(self.__impRes, "Fire", "")
if self.__measures : self.__fmeasures()
self.__sens[:] = []
self.__listrois[:] = []
self.__iplist[:] = []
self.__cellsrois[:] = []
self.__ipw[:] = []
self.__iph[:] = []
self.__init = False
def __dia(self, event):
IJ.run("Set Scale...", "distance=0 known=0 pixel=1 unit=pixel")
#IJ.run("Properties...", "channels=1 slices=1 frames=20 unit=pixel pixel_width=1.0000 pixel_height=1.0000 voxel_depth=1.0000 frame=[1 sec] origin=0,0");
self.__impD = IJ.getImage()
self.__isD = self.__impD.getImageStack()
self.__display.text = "DIA="+self.__impD.getTitle()
self.__initDIA = True
def __fluo(self, event):
IJ.run("Set Scale...", "distance=0 known=0 pixel=1 unit=pixel")
self.__impF = IJ.getImage()
self.__isF = self.__impF.getImageStack()
self.__display.text = "FLUO="+self.__impF.getTitle()
self.__initFLUO = True
def __addroi(self, event) :
if ( not self.__init) :
IJ.showMessage("", "please start a new stack")
return
if ( not self.__initDIA) :
IJ.showMessage("", "please select an image for DIA")
return
if ( not self.__initFLUO) :
IJ.showMessage("", "please select an image for FLUO")
return
twres = TextWindow("measures-"+self.__name, "label\tname\tsol\tarea\tcirc\tAR\tFeret\taxis\traf\tdMajor\tdFeret\tdArea", "", 300, 450)
tab="\t"
self.__widthl = self.__display2.getText()
IJ.selectWindow(self.__impF.getTitle())
self.__rm = RoiManager.getInstance()
if (self.__rm==None): self.__rm = RoiManager()
if self.__impF.getImageStackSize() > 1 :
roisarray =[(roi, self.__rm.getSliceNumber(roi.getName())) for roi in self.__rm.getRoisAsArray()]
else :
roisarray =[(roi, 1) for roi in self.__rm.getRoisAsArray()]
self.__rm.runCommand("reset")
#self.__rm.runCommand("Delete")
IJ.selectWindow(self.__impF.getTitle())
self.__maxraf=float(self.__display19.text)
self.__minraf=float(self.__display20.text)
count=1
for roielement in roisarray :
roi = roielement[0]
pos = roielement[1]
lab = self.__impF.getImageStack().getShortSliceLabel(pos)
if lab==None : lab=str(pos)
if self.__conEllipses :
IJ.selectWindow(self.__impF.getTitle())
self.__impF.setSlice(pos)
self.__impF.setRoi(roi)
self.__rm.runCommand("Add")
IJ.run(self.__impF, "Fit Ellipse", "")
ellipse=self.__impF.getRoi()
params = ellipse.getParams()
ferets = ellipse.getFeretValues()
imp2 = Duplicator().run(self.__impF,pos,pos)
IJ.run(imp2, "Rotate... ", "angle="+str(ferets[1])+" grid=0 interpolation=Bilinear enlarge slice")
temproi=Roi((imp2.getWidth()-ferets[0])/2.0,(imp2.getHeight()-ferets[2])/2.0,ferets[0],ferets[2])
imp2.setRoi(temproi)
imp3 = Duplicator().run(imp2,1,1)
ip3=imp3.getProcessor()
if int(self.__display5.text) < ip3.getWidth() < int(self.__display6.text) :
self.__iplist.append(ip3)
self.__display.text = self.__name + " cell " + str(len(self.__iplist))
fer=Line(params[0],params[1],params[2],params[3])
self.__cellsrois.append((fer, pos))
self.__labels.append(self.__isF.getShortSliceLabel(pos))
m=Morph(self.__impF, roi)
twres.append(lab+tab+str(roi.getName())+tab+str(m.Solidity)+tab+str(m.Area)+tab+str(m.Circ)+tab+str(m.AR)+tab+str(m.MaxFeret)+tab+str(fer.getLength())+tab+str(1)+tab+str(0)+tab+str(0)+tab+str(0))
self.__dictCells[count]=(str(roi.getName()), lab, roi)
count=count+1
continue
if roi.getType() in [6,7] :
self.__impF.setSlice(pos)
self.__impF.setRoi(roi)
self.__rm.runCommand("Add")
elif roi.getType() in [2,4] :
self.__impF.setSlice(pos)
self.__impF.setRoi(roi)
m=Morph(self.__impF, roi)
m.setMidParams(10, 2)
midroi=m.MidAxis
if midroi == None : continue
raf = m.MaxFeret/midroi.getLength()
if (self.__maxraf < raf) or (raf < self.__minraf) : continue
maxsol = float(self.__display7.text)
minsol = float(self.__display8.text)
maxarea = float(self.__display9.text)
minarea = float(self.__display10.text)
maxcirc = float(self.__display11.text)
mincirc = float(self.__display12.text)
maxar = float(self.__display13.text)
minar = float(self.__display14.text)
maxfer = float(self.__display15.text)
minfer = float(self.__display16.text)
maxmean = float(self.__display17.text)
minmean = float(self.__display18.text)
maxmferet = float(self.__display21.text)
minmferet = float(self.__display22.text)
testsol = (minsol< m.Solidity < maxsol)
testarea = (minarea< m.Area < maxarea)
testcirc = (mincirc< m.Circ < maxcirc)
testar = (minar< m.AR < maxar)
testfer = (minfer< m.MaxFeret < maxfer)
testmean = (minmean < m.Mean < maxmean)
testmferet = (minmferet < m.MinFeret < maxmferet)
#print minmferet , m.MinFeret , maxmferet
test = (testsol+testarea+testcirc+testar+testfer+testmean+testmferet)/7
if test :
fmaj, ffmx, fa =[],[],[]
for r in m.getMidSegments(10, 40, 0) :
if r == None : continue
m2=Morph(self.__impF, r)
fmaj.append(m2.Major)
ffmx.append(m2.MaxFeret)
fa.append(m2.Area)
diffmajor, diffferet, diffarea = 0,0,0
if len(fa) > 4 :
medfmaj = self.listmean(fmaj[1:-1])
medffmx = self.listmean(ffmx[1:-1])
medfa = self.listmean(fa[1:-1])
diffmajor = (max(fmaj[1:-1])-medfmaj)/medfmaj
diffferet = (max(ffmx[1:-1])-medffmx)/medffmx
diffarea = (max(fa[1:-1])-medfa)/medfa
twres.append(lab+tab+str(roi.getName())+tab+str(m.Solidity)+tab+str(m.Area)+tab+str(m.Circ)+tab+str(m.AR)+tab+str(m.MaxFeret)+tab+str(midroi.getLength())+tab+str(m.MaxFeret/midroi.getLength())+tab+str(diffmajor)+tab+str(diffferet)+tab+str(diffarea))
#print lab+tab+str(roi.getName())+tab+str(m.Solidity)+tab+str(m.Area)+tab+str(m.Circ)+tab+str(m.AR)+tab+str(m.MaxFeret)+tab+str(midroi.getLength())+tab+str(m.MaxFeret/midroi.getLength())+tab+str(diffmajor)+tab+str(diffferet)+tab+str(diffarea)
self.__impF.setRoi(roi)
self.__rm.runCommand("Add")
self.__impF.killRoi()
self.__impF.setRoi(midroi)
#self.__dictCells[str(roi.getName())]=(str(roi.getName()), lab, roi)
self.__dictCells[count]=(str(roi.getName()), lab, roi)
count=count+1
else :
#print "test falls"
continue
else :
print "out loop"
continue
straightener = Straightener()
new_ip = straightener.straighten(self.__impF, midroi, int(self.__widthl))
if int(self.__display5.text) < new_ip.getWidth() < int(self.__display6.text) :
self.__iplist.append(new_ip)
self.__display.text = self.__name + " cell " + str(len(self.__iplist))
#print "add", roi.getName(), roi.getType()
self.__cellsrois.append((midroi, pos))
self.__labels.append(self.__isF.getShortSliceLabel(pos))
#roisarray=self.__rm.getRoisAsArray()
#self.__rm.runCommand("reset")
#self.__rm.runCommand("Delete")
self.__impD.killRoi()
self.__impF.killRoi()
IJ.selectWindow(self.__impD.getTitle())
def __boxaction0(self, event):
self.__skip = event.getSource().isSelected()
def __boxaction1(self, event):
self.__mosa = event.getSource().isSelected()
#self.__setDisplay(str(event.getSource().text)+" is "+str(event.getSource().isSelected()))
def __boxaction2(self, event):
self.__avg = event.getSource().isSelected()
#self.__setDisplay(str(event.getSource().text)+" is "+str(event.getSource().isSelected()))
def __boxaction3(self, event):
self.__maxfinder = event.getSource().isSelected()
#self.__setDisplay(str(event.getSource().text)+" is "+str(event.getSource().isSelected()))
def __boxaction4(self, event):
self.__appmedian = event.getSource().isSelected()
#self.__setDisplay(str(event.getSource().text)+" is "+str(event.getSource().isSelected()))
def __boxaction5(self, event):
self.__fire = event.getSource().isSelected()
#self.__setDisplay(str(event.getSource().text)+" is "+str(event.getSource().isSelected()))
def __boxaction6(self, event):
self.__align = event.getSource().isSelected()
#self.__setDisplay(str(event.getSource().text)+" is "+str(event.getSource().isSelected()))
def __boxaction7(self, event):
self.__enlarge = event.getSource().isSelected()
#self.__setDisplay(str(event.getSource().text)+" is "+str(event.getSource().isSelected()))
def __boxaction8(self, event):
self.__measures = event.getSource().isSelected()
#self.__setDisplay(str(event.getSource().text)+" is "+str(event.getSource().isSelected()))
def __boxaction9(self, event):
self.__alignC = event.getSource().isSelected()
#self.__setDisplay(str(event.getSource().text)+" is "+str(event.getSource().isSelected()))
def __boxaction10(self, event):
self.__conEllipses = event.getSource().isSelected()
def __favg(self) :
zp = ZProjector(self.__impRes)
zp.setMethod(ZProjector.AVG_METHOD)
zp.doProjection()
imp = zp.getProjection()
imp.show()
if self.__fire : IJ.run(imp, "Fire", "")
def __fmosa(self) :
mm = MontageMaker()
imp = mm.makeMontage2(self.__impRes, 1, self.__impRes.getStackSize(), 1, 1, self.__impRes.getStackSize(), 1, 0, False)
imp.setTitle("MONTAGE"+self.__name)
imp.show()
if self.__fire : IJ.run(imp, "Fire", "")
def __fmaxfinder(self) :
#stack = self.__impRes.getStack()
self.__impD.killRoi()
self.__impF.killRoi()
stack = self.__impF.getStack()
n_slices = stack.getSize()
#newstack=ImageStack(self.__impRes.getWidth(), self.__impRes.getHeight())
newstack=ImageStack(self.__impF.getWidth(), self.__impF.getHeight())
noise = self.__display3.text
for index in range(1,n_slices+1):
IJ.selectWindow(self.__impF.getTitle())
self.__impF.setSlice(index)
ip = self.__impF.getProcessor()
mf=MaximumFinder()
ipmax = mf.findMaxima(ip, int(noise), 0, 0, False, False)
newstack.addSlice("", ipmax)
newimage=ImagePlus("max points"+self.__name, newstack)
newimage.show()
newimage.updateAndDraw()
listip = []
maxh=self.__impRes.getHeight()
for roi in self.__cellsrois :
straightener = Straightener()
newimage.setSlice(roi[1])
newimage.setRoi(roi[0])
#listip.append(straightener.straighten(newimage, roi[0], int(self.__widthl)))
listip.append(straightener.straighten(newimage, roi[0], maxh))
ipw=[ ip.getWidth() for ip in listip ]
iph=[ ip.getHeight() for ip in listip ]
maxw=max(ipw)
maxh=max(iph)
if self.__enlarge : resizelist = [ ip.resize(maxw, maxh, True) for ip in listip ]
elif self.__alignC :
resizelist = []
for ip in listip :
tempip = ByteProcessor(maxw, maxh)
tempip.copyBits(ip, 0, 0, Blitter.COPY)
resizelist.append(tempip)
else :
resizelist = []
for ip in listip :
tempip = ByteProcessor(maxw, maxh)
tempip.copyBits(ip, 0, 0, Blitter.COPY)
resizelist.append(tempip)
ims = ImageStack(maxw, maxh)
#for ip in resizelist : ims.addSlice("", ip)
for i in range(len(resizelist)) :
ims.addSlice(self.__labels[i], resizelist[i])
self.__impMax = ImagePlus(self.__name+"-max", ims)
self.__impMax.show()
stack = self.__impMax.getStack() # get the stack within the ImagePlus
n_slices = stack.getSize()
for index in range(1, n_slices+1):
self.__impMax.killRoi()
self.__impMax.setSlice(index)
roi = self.__listrois[index-1]
if self.__sens[index-1]<0 :
self.__impMax.setRoi(roi)
ip1 = self.__impMax.getProcessor()
ip1.flipHorizontal()
self.__impMax.killRoi()
self.__impMax.updateAndDraw()
ip = self.__impMax.getProcessor()
for i in range(ip.getWidth()*ip.getHeight()) :
if ip.getf(i) > 0 : ip.setf(i, 255)
#else : ip.setf(i, 0)
IJ.run(self.__impMax, "8-bit", "")
IJ.run(self.__impMax, "Options...", "iterations=2 count=1 black edm=Overwrite do=Close stack")
IJ.run(self.__impMax, "Ultimate Points", "stack")
self.__impMax.updateAndDraw()
def __falign(self) :
#self.__impRes=IJ.getImage()
stack = self.__impRes.getStack() # get the stack within the ImagePlus
n_slices = stack.getSize() # get the number of slices
ic = ImageCalculator()
w = self.__impRes.getWidth()
h = self.__impRes.getHeight()
self.__sens[:] = []
self.__listrois[:] = []
for index in range(1, n_slices+1):
self.__impRes.setSlice(index)
ip1 = stack.getProcessor(index)
imp1 = ImagePlus("imp1-"+str(index), ip1)
imp1sqr = ic.run("Multiply create 32-bit", imp1, imp1)
IJ.setThreshold(imp1sqr, 1, 4294836225)
IJ.run(imp1sqr, "Create Selection", "")
roi = imp1sqr.getRoi()
rect=roi.getBounds()
roi = Roi(rect)
self.__listrois.append(roi)
ipsqr = imp1sqr.getProcessor()
is1 = ipsqr.getStatistics()
self.__impRes.killRoi()
if is1.xCenterOfMass > w/2.00 :
self.__impRes.setRoi(roi)
ip1 = self.__impRes.getProcessor()
ip1.flipHorizontal()
self.__impRes.killRoi()
self.__sens.append(-1)
else : self.__sens.append(1)
self.__impRes.updateAndDraw()
def __fmeasures(self) :
self.__Cutoff = float(self.__display4.text)
nslices = self.__impRes.getImageStackSize()
rt = ResultsTable()
rt.show("RT-"+self.__name)
twpoints = TextWindow("points-"+self.__name, "index\tlabel\tname\tx\ty\taxis\tcellw\tcellh", "", 200, 450)
twlabels = TextWindow("labels-"+self.__name, "index\tlabel\tname\tnpoints", "", 200, 450)
isres = self.__impRes.getImageStack()
for index in range(1, nslices+1):
self.__impRes.setSlice(index)
self.__impRes.killRoi()
roi = self.__listrois[index-1]
self.__impRes.setRoi(roi)
analyser= Analyzer(self.__impRes, Analyzer.LABELS+Analyzer.CENTER_OF_MASS+Analyzer.CENTROID+Analyzer.INTEGRATED_DENSITY+Analyzer.MEAN+Analyzer.KURTOSIS+Analyzer.SKEWNESS+Analyzer.MIN_MAX+Analyzer.SLICE+Analyzer.STACK_POSITION+Analyzer.STD_DEV, rt)
analyser.measure()
rt.show("RT-"+self.__name)
rect=roi.getBounds()
ip = self.__impRes.getProcessor()
xCoord = []
yCoord = []
currentPixel = []
m00 = 0.00
m10 = 0.00
m01 = 0.00
mc20 = 0.00
mc02 = 0.00
mc11 = 0.00
mc30 = 0.00
mc03 = 0.00
mc21 = 0.00
mc12 = 0.00
mc40 = 0.00
mc04 = 0.00
mc31 = 0.00
mc13 = 0.00
mm20 = 0.00
mm02 = 0.00
mm11 = 0.00
mm30 = 0.00
mm03 = 0.00
mm21 = 0.00
mm12 = 0.00
mm40 = 0.00
mm04 = 0.00
mm31 = 0.00
mm13 = 0.00
for y in range(rect.y, rect.y+rect.height, 1) :
for x in range(rect.x, rect.x+rect.width, 1) :
xCoord.append(x+0.5)
yCoord.append(y+0.5)
#pixel=ip.getf(x,y)-self.__Cutoff
pixel = ip.getPixelValue(x,y)-self.__Cutoff
if pixel < 0 : pixel = 0
currentPixel.append(pixel)
m00 += currentPixel[-1]
m10 += currentPixel[-1]*xCoord[-1]
m01 += currentPixel[-1]*yCoord[-1]
xm = m10/(m00+0.00000001)
ym = m01/(m00+0.00000001)
xc = rect.width/2.00
yc = rect.height/2.00
for i in range(rect.width*rect.height) :
xcrel = xCoord[i]-xc
ycrel = yCoord[i]-yc
#mc20 += currentPixel[i]*(xCoord[i]-xc)*(xCoord[i]-xc)
#mc02 += currentPixel[i]*(yCoord[i]-yc)*(yCoord[i]-yc)
#mc11 += currentPixel[i]*(xCoord[i]-xc)*(yCoord[i]-yc)
#
#mc30 += currentPixel[i]*(xCoord[i]-xc)*(xCoord[i]-xc)*(xCoord[i]-xc)
#mc03 += currentPixel[i]*(yCoord[i]-yc)*(yCoord[i]-yc)*(yCoord[i]-yc)
#mc21 += currentPixel[i]*(xCoord[i]-xc)*(xCoord[i]-xc)*(yCoord[i]-yc)
#mc12 += currentPixel[i]*(xCoord[i]-xc)*(yCoord[i]-yc)*(yCoord[i]-yc)
#
#mc40 += currentPixel[i]*(xCoord[i]-xc)*(xCoord[i]-xc)*(xCoord[i]-xc)*(xCoord[i]-xc)
#mc04 += currentPixel[i]*(yCoord[i]-yc)*(yCoord[i]-yc)*(yCoord[i]-yc)*(yCoord[i]-yc)
#mc31 += currentPixel[i]*(xCoord[i]-xc)*(xCoord[i]-xc)*(xCoord[i]-xc)*(yCoord[i]-yc)
#mc13 += currentPixel[i]*(xCoord[i]-xc)*(yCoord[i]-yc)*(yCoord[i]-yc)*(yCoord[i]-yc)
mc20 += currentPixel[i]*xcrel*xcrel
mc02 += currentPixel[i]*ycrel*ycrel
mc11 += currentPixel[i]*xcrel*ycrel
mc30 += currentPixel[i]*xcrel*xcrel*xcrel
mc03 += currentPixel[i]*ycrel*ycrel*ycrel
mc21 += currentPixel[i]*xcrel*xcrel*ycrel
mc12 += currentPixel[i]*xcrel*ycrel*ycrel
mc40 += currentPixel[i]*xcrel*xcrel*xcrel*xcrel
mc04 += currentPixel[i]*ycrel*ycrel*ycrel*ycrel
mc31 += currentPixel[i]*xcrel*xcrel*xcrel*ycrel
mc13 += currentPixel[i]*xcrel*ycrel*ycrel*ycrel
for i in range(rect.width*rect.height) :
mm20 += currentPixel[i]*(xCoord[i]-xm)*(xCoord[i]-xm)
mm02 += currentPixel[i]*(yCoord[i]-ym)*(yCoord[i]-ym)
mm11 += currentPixel[i]*(xCoord[i]-xm)*(yCoord[i]-ym)
mm30 += currentPixel[i]*(xCoord[i]-xm)*(xCoord[i]-xm)*(xCoord[i]-xm)
mm03 += currentPixel[i]*(yCoord[i]-ym)*(yCoord[i]-ym)*(yCoord[i]-ym)
mm21 += currentPixel[i]*(xCoord[i]-xm)*(xCoord[i]-xm)*(yCoord[i]-ym)
mm12 += currentPixel[i]*(xCoord[i]-xm)*(yCoord[i]-ym)*(yCoord[i]-ym)
mm40 += currentPixel[i]*(xCoord[i]-xm)*(xCoord[i]-xm)*(xCoord[i]-xm)*(xCoord[i]-xm)
mm04 += currentPixel[i]*(yCoord[i]-ym)*(yCoord[i]-ym)*(yCoord[i]-ym)*(yCoord[i]-ym)
mm31 += currentPixel[i]*(xCoord[i]-xm)*(xCoord[i]-xm)*(xCoord[i]-xm)*(yCoord[i]-ym)
mm13 += currentPixel[i]*(xCoord[i]-xm)*(yCoord[i]-ym)*(yCoord[i]-ym)*(yCoord[i]-ym)
xxcVar = mc20/m00
yycVar = mc02/m00
xycVar = mc11/m00
xcSkew = mc30/(m00 * math.pow(xxcVar,(3.0/2.0)))
ycSkew = mc03/(m00 * math.pow(yycVar,(3.0/2.0)))
xcKurt = mc40 / (m00 * math.pow(xxcVar,2.0)) - 3.0
ycKurt = mc04 / (m00 * math.pow(yycVar,2.0)) - 3.0
ecc = (math.pow((mc20-mc02),2.0)+(4.0*mc11*mc11))/m00
xxmVar = mm20/m00
yymVar = mm02/m00
xymVar = mm11/m00
xmSkew = mm30/(m00 * math.pow(xxmVar,(3.0/2.0)))
ymSkew = mm03/(m00 * math.pow(yymVar,(3.0/2.0)))
xmKurt = mm40 / (m00 * math.pow(xxmVar,2.0)) - 3.0
ymKurt = mm04 / (m00 * math.pow(yymVar,2.0)) - 3.0
ecm = (math.pow((mm20-mm02),2.0)+(4.0*mm11*mm11))/m00
rt.addValue("xxcVar", xxcVar)
rt.addValue("yycVar", yycVar)
rt.addValue("xycVar", xycVar)
rt.addValue("xcSkew", xcSkew)
rt.addValue("ycSkew", ycSkew)
rt.addValue("xcKurt", xcKurt)
rt.addValue("ycKurt", ycKurt)
rt.addValue("Ecc", ecc)
rt.addValue("xxmVar", xxmVar)
rt.addValue("yymVar", yymVar)
rt.addValue("xymVar", xymVar)
rt.addValue("xmSkew", xmSkew)
rt.addValue("ymSkew", ymSkew)
rt.addValue("xmKurt", xmKurt)
rt.addValue("ymKurt", ymKurt)
rt.addValue("Ecm", ecm)
rt.addValue("roiw", rect.width)
rt.addValue("roih", rect.height)
rt.addValue("cellw", self.__ipw[index-1])
rt.addValue("cellh", self.__iph[index-1])
self.__impRes.killRoi()
xCoord[:] = []
yCoord[:] = []
currentPixel[:] = []
points = []
points[:] = []
npointsmax = 0
#lab = self.__labels[index-1]
nameroi = self.__dictCells[index][0]
lab = self.__dictCells[index][1]
self.__impMax.setSlice(index)
ipmax = self.__impMax.getProcessor()
for y in range(ipmax.getHeight()) :
for x in range(ipmax.getWidth()) :
if ipmax.getPixelValue(x,y) > 0 :
#print str(index)
#print lab
#print nameroi
#print str(x)
#print str(y)
#print str(self.__cellsrois[index-1][0].getLength())
#print str(self.__ipw[index-1])
#print str(self.__iph[index-1])
twpoints.append(str(index)+"\t"+lab+"\t"+nameroi+"\t"+str(x)+"\t"+str(y)+"\t"+str(self.__cellsrois[index-1][0].getLength())+"\t"+str(self.__ipw[index-1])+"\t"+str(self.__iph[index-1]))
npointsmax+=1
rt.addValue("npoints", npointsmax)
twlabels.append(str(index)+"\t"+lab+"\t"+nameroi+"\t"+str(npointsmax))
rt.show("RT-"+self.__name)
rt.show("RT-"+self.__name)
def __setDisplay(self, val=""):
self.__display.text = str(val)
def setLabel(self, text):
self.__label.setText(text)
def listmean(self, l) : return float(sum(l)/len(l))
def listmedian(self, l) :
s=l[:]
s.sort()
w=len(l)
return float(s[(w-1)/2]) if (w%2 == 1) else float((s[w/2]+s[(w/2)-1]))/2
def __help(self, event):
IJ.log("""
--------------------------------------------------------------------------------------
New = Starts a new process with stacked cells
Add = Adds un ROI as a new cell in the stack (poly segments line or a closed area ROI)
Add Roi manager = adds all the ROIs contained in the roi manager
End = Stops the stack process and generates images and results
--------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------
Line width = width of the cells in pixels.
Noise for peaks = value passed to detect peaks function
Fluo threshold = value of the background in the fluo image. Used for acurated calculus of moments.
Min length = filter for small short cells
Max length = filter for long cells
--------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------
DIA = Select the image and click to set the source image for cells ROI
FLUO = Select the image and click to set the image containig the fluorescence signal
(if Add Roi manager selected, this is not take in to account)
--------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------
Skip failed ROIs = debug option
Generate Mosaic = Generates a vertcal image with all the stacked cells
Mean Projection = creates the projection of all cells by mean method
Create maxFinder = uses the maxFinder function to generate peaks information
Apply median = smooth the streched images by a 3x3 median filter
Apply Fire LUT = shows all images with false colors (Fire LUT)
Auto Align = Flip the cells to align the center of mass in the left part of the images
Auto enlarge = Stretch the cell to fit the length of the longuest cell
Generate measures = creates a text windows with measures parameters.
""")
continue
idx = tempvar.index(max(tempvar))
start = frame[0]
metaphase = frame[idx+3]
if (division - start > 15 and division - start < 100):
if start>0:
for spot in sortedTrack:
# Fetch spot features directly from spot.
x=spot.getFeature('POSITION_X')
y=spot.getFeature('POSITION_Y')
t=spot.getFeature('FRAME')
roi2 = OvalRoi(x/dx - (6*dx), y/dy - (6*dy), 12, 12)
roi2.setPosition(int(t))
rm.add(imp, roi2, nextRoi)
nextRoi = nextRoi+1
resultstable.setValue("IMAGE_NAME", trackrowNumber, filename)
resultstable.setValue("TRACK_ID", trackrowNumber, id)
resultstable.setValue("START", trackrowNumber, start)
resultstable.setValue("METAPHASE", trackrowNumber, metaphase)
resultstable.setValue("END", trackrowNumber, division)
trackrowNumber = trackrowNumber + 1
# plot = Plot(str(id), "slice", "mean", frame, var)
# plot.show()
# break
# imp.close()
resultstable.show("Results")
idx = tempvar.index(max(tempvar))
start = frame[0]
metaphase = frame[idx + 3]
if (division - start > 15 and division - start < 100):
if start > 0:
for spot in sortedTrack:
# Fetch spot features directly from spot.
x = spot.getFeature('POSITION_X')
y = spot.getFeature('POSITION_Y')
t = spot.getFeature('FRAME')
roi2 = OvalRoi(x / dx - (6 * dx), y / dy - (6 * dy),
12, 12)
roi2.setPosition(int(t))
rm.add(imp, roi2, nextRoi)
nextRoi = nextRoi + 1
resultstable.setValue("IMAGE_NAME", trackrowNumber,
filename)
resultstable.setValue("TRACK_ID", trackrowNumber, id)
resultstable.setValue("START", trackrowNumber, start)
resultstable.setValue("METAPHASE", trackrowNumber,
metaphase)
resultstable.setValue("END", trackrowNumber, division)
trackrowNumber = trackrowNumber + 1
# plot = Plot(str(id), "slice", "mean", frame, var)
# plot.show()
# break
# imp.close()
def segmentation(imp, spot_data, channel, diameter_init, ES_tolerance, ES_area_max, ES_ctrl_pts, ES_iteration, repeat_max):
# Open files
cal = imp.getCalibration()
manager = RoiManager.getInstance()
if manager is None:
manager = RoiManager()
# Prepare log files for output
options = IS.MEDIAN | IS.AREA | IS.MIN_MAX | IS.CENTROID | IS.PERIMETER | IS.ELLIPSE | IS.SKEWNESS
convergence = []
Sintensity = []
for spot in spot_data:
repeat = 0
flag = False
spotID = int(spot[0])
Xcenter = (float(spot[1]) / cal.pixelWidth)
Ycenter = (float(spot[2]) / cal.pixelHeight)
Quality = float(spot[3])
diameter_init = float(spot[4] / cal.pixelWidth) * 2.0
while True:
manager = RoiManager.getInstance()
if manager is None:
manager = RoiManager()
Xcurrent = int(Xcenter - diameter_init / 2.0)
Ycurrent = int(Ycenter - diameter_init / 2.0)
Dcurrent1 = int(diameter_init * (1.2 - repeat / 10.0))
Dcurrent2 = int(diameter_init * (0.8 + repeat / 10.0))
roi = OvalRoi(Xcurrent, Ycurrent, Dcurrent1, Dcurrent2)
imp.setPosition(channel)
imp.setRoi(roi)
Esnake_options1 = "target_brightness=Bright control_points=" + \
str(ES_ctrl_pts) + " gaussian_blur=0 "
Esnake_options2 = "energy_type=Contour alpha=2.0E-5 max_iterations=" + \
str(ES_iteration) + " immortal=false"
IJ.run(imp, "E-Snake", Esnake_options1 + Esnake_options2)
roi_snake = manager.getRoisAsArray()
roi_ind = len(roi_snake) - 1
stats = IS.getStatistics(
imp.getProcessor(), options, imp.getCalibration())
perimeter = roi_snake[roi_ind].getLength() * cal.pixelWidth
circularity = 4.0 * 3.1417 * (stats.area / (perimeter * perimeter))
if stats.area > 17.0 and stats.area < ES_area_max and stats.skewness < -0.01 and circularity > 0.01 and stats.minor > 2.0 and boundaries(Xcenter, Ycenter, stats.xCentroid / cal.pixelWidth, stats.yCentroid / cal.pixelHeight, ES_tolerance):
Sintensity = stats.median
convergence.append(True)
break
if stats.median > 6000 and stats.area > 17.0 and stats.area < ES_area_max:
Sintensity = stats.median
convergence.append(True)
break
elif repeat > repeat_max:
manager.select(imp, roi_ind)
manager.runCommand(imp, 'Delete')
roi = OvalRoi(Xcenter + 1.0 - diameter_init / 2.0, Ycenter +
1.0 - diameter_init / 2.0, diameter_init, diameter_init)
imp.setRoi(roi)
manager.add(imp, roi, spotID)
roi_snake.append(roi)
stats = IS.getStatistics(
imp.getProcessor(), options, imp.getCalibration())
Sintensity = stats.median
convergence.append(False)
break
else:
IJ.log('Area=' + str(stats.area) + ' Skewness=' + str(stats.skewness) +
' circularity=' + str(circularity) + ' Minor=' + str(stats.minor))
manager.select(imp, roi_ind)
manager.runCommand(imp, 'Delete')
repeat += 1
# End Spot-segmentation
# End all Spots-segmentation
manager.runCommand(imp, 'Show All')
imp.setPosition(channel)
color = imp.createImagePlus()
ip = imp.getProcessor().duplicate()
color.setProcessor("segmentation" + str(channel), ip)
color.show()
IJ.selectWindow("segmentation" + str(channel))
manager.moveRoisToOverlay(color)
spot_optimal = manager.getRoisAsArray()
manager.reset()
for i in xrange(0, len(spot_optimal)):
spot = spot_optimal[i]
spot.setStrokeWidth(2)
if convergence[i]:
spot.setStrokeColor(Color.GREEN)
else:
spot.setStrokeColor(Color.MAGENTA)
imp.setRoi(spot)
manager.add(imp, spot, i)
manager.runCommand(imp, 'Show All')
imp.setPosition(channel)
manager = RoiManager()
RoiManager(False) #sho the roi manager window, wierd interface
i = 1
for currPoint in pointList:
#print "point " + str(i)
x, y, z = currPoint.split(",")
#composite is interleaved with ch1/ch2
#if doComposite==1:
# z *= 2
#a point roi (This seems to be in pixels???)
pROI = PointRoi(int(x), int(y), imp1)
imp1.setSliceWithoutUpdate(int(z))
manager.add(imp1, pROI, int(z)) #add WITH slice, I want the pROI to be a 3D point
#manager.addRoi(pROI) #add WITHOUT slice
i += 1
print "added " + str(i) + " pnts to roi manager"
if do3d==1:
#see: http://www.ini.uzh.ch/~acardona/fiji-tutorial/
ps = [] #list of Point3f (pointList)
cps = [] #list of Point3f of connection points (cPointList)
lps = [] #list of backbone centerline points (lPointList)
cell_diameter = 3 #right now in pixels, eventually in um
#print "Setting Spine Points..."
for currPoint in pointList:
x, y, z = currPoint.split(",")
def tethered_cell(image_path, frame_number=100, frame_rate=100.0, CCW=1):
"""
parameter setting; frame rate (frame/sec)
CCW = 1 : the motor rotation direction and the cell rotation direction on the image are same
CCW = -1: the motor rotation direction and the cell rotation direction on the image are different
"""
opener = Opener()
imp = opener.openImage(image_path)
image_slice_number = imp.getNSlices()
rm = RoiManager().getInstance()
if image_slice_number < frame_number: # too short movie
IJ.log('Number of frame of the movie is fewer than the number of frame that you selected')
return False
# create result directory
result_path = image_path + '_tethered_cell_result'
if os.path.lexists(result_path) is False:
os.mkdir(result_path)
#z projection; standard deviation, tethered cell shorws circle
IJ.run(imp, 'Subtract Background...', 'rolling=5 light stack')
IJ.run(imp, 'Median...', 'radius=2 stack')
IJ.run(imp, 'Z Project...', 'stop=500 projection=[Standard Deviation]')
zimp = IJ.getImage()
IJ.saveAs(zimp, 'bmp', os.path.join(result_path,'STD_DEV.bmp'))
# pick up tethered cell
IJ.setAutoThreshold(zimp, 'MaxEntropy dark')
IJ.run(zimp, 'Convert to Mask', '')
IJ.run('Set Measurements...', "area centroid bounding shape feret's limit redirect=None decimal=3")
IJ.run(zimp, 'Analyze Particles...', 'size=30-Infinity circularity=0.88-1.00 show=Nothing display exclude clear include')
zrt = ResultsTable.getResultsTable()
IJ.saveAs('Results', os.path.join(result_path,'RoiInfo.csv'))
#tcX and tcY are xy coordinates of tethered cell, tcdia is outer diameter of rotating tethered cell
#add ROI into stack image
for i in range(zrt.getCounter()):
tcX = zrt.getValue('X', i)
tcY = zrt.getValue('Y', i)
tcdia = zrt.getValue('Feret', i)
rm.add(imp, OvalRoi(tcX - tcdia/2.0, tcY - tcdia/2.0, tcdia + 1, tcdia + 1), i)
#calculate rotation speed by ellipse fitting
IJ.setAutoThreshold(imp, 'Li')
for roi_number in range(rm.getCount()):
t = []
XM = []
YM = []
theta = []
rotation_speed = []
area = []
imp.setRoi(rm.getRoi(roi_number))
cropped_imp = Duplicator().run(imp)
IJ.run('Set Measurements...', 'area mean center fit limit redirect=None decimal=3')
rm.select(roi_number)
rt = rm.multiMeasure(imp)
# check cell is present while analysis. Don't a cell gose anywhare?
for i in range(frame_number):
area.append(rt.getValue('Area1', i))
if 0 in area:
continue
for i in range(frame_number):
t.append((1/frame_rate)*i)
XM.append(rt.getValue('XM1', i))
YM.append(rt.getValue('YM1', i))
theta.append(rt.getValue('Angle1', i)/180.0*math.pi) # convert to radian
if i == 0:
rotation_speed.append(0)
else:
# phase treatment, theta should be -pi ~ pi
temp_rotation_speed = [theta[i] - theta[i-1],
theta[i] - theta[i-1] + math.pi,
theta[i] - theta[i-1] - math.pi,
theta[i] - theta[i-1] + 2*math.pi,
theta[i] - theta[i-1] - 2*math.pi]
temp_rotation_speed = sorted(temp_rotation_speed, key = lambda x :abs(x) )[0]
rotation_speed.append(CCW*temp_rotation_speed/(2.0*math.pi)*frame_rate)
# write csv
# earch columns indicate 1:index, 2:time(sec), 3:X-coordinate of center of mass(pixel), 4:Y-coordinate of center of mass (pixel), 5:Angle(Radian), 6:Rotation Speed(Hz)
with open(os.path.join(result_path,'Roi' + str(roi_number) + '.csv'), 'w') as f:
writer = csv.writer(f)
writer.writerow(['Index', 'time(s)', 'X', 'Y', 'Angle(rad)', 'Rotation Speed(Hz)'])
for i in range(len(t)):
writer.writerow([i, t[i], XM[i], YM[i], theta[i], rotation_speed[i]])
# plot x-y, t-x, t-y, t-rotation speed, save plot as bmp
plotRotation(roi_number, result_path, t, XM, YM, rotation_speed)
IJ.saveAs(cropped_imp, 'tiff', os.path.join(result_path,'Roi' + str(roi_number) + '.tiff'))
rt.reset()
# get analysis date and time
dt = datetime.datetime.today()
dtstr = dt.strftime('%Y-%m-%d %H:%M:%S')
# wtite analysis setting
with open(os.path.join(result_path,'analysis_setting.csv'), 'w') as f:
writer = csv.writer(f)
writer.writerow(['Analysis Date','frame number','frame rate','CCW direction', 'Method','Auto threshold', 'Subtruct Background', 'Median filter'])
writer.writerow([dtstr, frame_number, frame_rate, CCW, 'Ellipse', 'Li', '5.0', '2'])
# save roi
if rm.getCount() != 0:
rm.runCommand('Save', os.path.join(result_path, 'Roi.zip'))
zimp.close()
imp.close()
rm.close()
zrt.reset()
def channel_segmentation(infile, diameter, tolerance, repeat_max, Zrepeat=10):
# ROI optimization by Esnake optimisation
default_options = "stack_order=XYCZT color_mode=Grayscale view=Hyperstack"
IJ.run("Bio-Formats Importer", default_options + " open=[" + infile + "]")
imp = IJ.getImage()
cal = imp.getCalibration()
channels = [i for i in xrange(1, imp.getNChannels() + 1)]
log = filename(infile)
log = re.sub('.ids', '.csv', log)
XZdrift, YZdrift = retrieve_Zdrift(log)
XZpt = [i * imp.getWidth() / Zrepeat for i in xrange(1, Zrepeat - 1)]
YZpt = [i * imp.getHeight() / Zrepeat for i in xrange(1, Zrepeat - 1)]
# Prepare head output file
for ch in channels:
csv_name = 'ch' + str(ch) + log
with open(os.path.join(folder6, csv_name), 'wb') as outfile:
SegLog = csv.writer(outfile, delimiter=',')
SegLog.writerow(['spotID', 'Xpos', 'Ypos', 'Zpos',
'Quality', 'area', 'intensity', 'min', 'max', 'std'])
# Retrieve seeds from SpotDetector
options = IS.MEDIAN | IS.AREA | IS.MIN_MAX | IS.CENTROID
spots = retrieve_seeds(log)
for ch in channels:
for spot in spots:
repeat = 0
# Spots positions are given according to calibration, need to
# convert it to pixel coordinates
spotID = int(spot[0])
Xcenter = int(float(spot[2]) / cal.pixelWidth)
Ycenter = int(float(spot[3]) / cal.pixelHeight)
Zcenter = float(spot[4]) / cal.pixelDepth
Quality = float(spot[5])
# find closest grid location in Zdrift matrix
Xpt = min(range(len(XZpt)), key=lambda i: abs(XZpt[i] - Xcenter))
Ypt = min(range(len(YZpt)), key=lambda i: abs(YZpt[i] - Ycenter))
# Calculate Z position according to SpotZ, calibration and
# channel-specific Zdrift #
Zshift = median([float(XZdrift[Xpt][ch - 1]),
float(YZdrift[Ypt][ch - 1])]) / cal.pixelDepth
correctZ = int(Zcenter - Zshift)
imp.setPosition(ch, correctZ, 1)
imp.getProcessor().setMinAndMax(0, 3000)
while True:
manager = RoiManager.getInstance()
if manager is None:
manager = RoiManager()
roi = OvalRoi(Xcenter - diameter * (1.0 + repeat / 10.0) / 2.0, Ycenter - diameter * (
1.0 + repeat / 10.0) / 2.0, diameter * (1.0 + repeat / 10.0), diameter * (1.0 + repeat / 10.0))
imp.setRoi(roi)
IJ.run(imp, "E-Snake", "target_brightness=Bright control_points=3 gaussian_blur=0 energy_type=Mixture alpha=2.0E-5 max_iterations=20 immortal=false")
roi_snake = manager.getRoisAsArray()[0]
imp.setRoi(roi_snake)
stats = IS.getStatistics(
imp.getProcessor(), options, imp.getCalibration())
manager.reset()
if stats.area > 20.0 and stats.area < 150.0 and boundaries(Xcenter, Ycenter, stats.xCentroid / cal.pixelWidth, stats.yCentroid / cal.pixelHeight, tolerance):
Sarea = stats.area
Sintensity = stats.median
Smin = stats.min
Smax = stats.max
Sstd = stats.stdDev
break
elif repeat > repeat_max:
roi = OvalRoi(Xcenter - diameter / 2.0,
Ycenter - diameter / 2.0, diameter, diameter)
imp.setRoi(roi)
manager.add(imp, roi, i)
stats = IS.getStatistics(
imp.getProcessor(), options, imp.getCalibration())
Sarea = stats.area
Sintensity = stats.median
Smin = stats.min
Smax = stats.max
Sstd = stats.stdDev
break
else:
repeat += 1
# Save results
csv_name = 'ch' + str(ch) + log
with open(os.path.join(folder6, csv_name), 'ab') as outfile:
SegLog = csv.writer(outfile, delimiter=',')
SegLog.writerow([spotID, Xcenter, Ycenter, correctZ,
Quality, Sarea, Sintensity, Smin, Smax, Sstd])
# End spot optimization
# End spots
# End channels
IJ.selectWindow(filename(infile))
IJ.run("Close")
manager = RoiManager()
RoiManager(False) #sho the roi manager window, wierd interface
i = 1
for currPoint in pointList:
#print "point " + str(i)
x, y, z = currPoint.split(",")
#composite is interleaved with ch1/ch2
#if doComposite==1:
# z *= 2
#a point roi (This seems to be in pixels???)
pROI = PointRoi(int(x), int(y), imp1)
imp1.setSliceWithoutUpdate(int(z))
manager.add(imp1, pROI,
int(z)) #add WITH slice, I want the pROI to be a 3D point
#manager.addRoi(pROI) #add WITHOUT slice
i += 1
print "added " + str(i) + " pnts to roi manager"
if do3d == 1:
#see: http://www.ini.uzh.ch/~acardona/fiji-tutorial/
ps = [] #list of Point3f (pointList)
cps = [] #list of Point3f of connection points (cPointList)
lps = [] #list of backbone centerline points (lPointList)
cell_diameter = 3 #right now in pixels, eventually in um
#print "Setting Spine Points..."
for currPoint in pointList:
x, y, z = currPoint.split(",")
f = open(str(xFile))
for line in f:
x.append(line.replace("\n","").split(","))
f.close()
f = open(str(yFile))
for line in f:
y.append(line.replace("\n","").split(","))
f.close()
f = open(str(zFile))
for line in f:
z.append(line.replace("\n","").split(","))
f.close()
x.pop(0)
y.pop(0)
z.pop(0)
imp = IJ.getImage()
rm = RoiManager()
IJ.log("Processing started")
for point in x:
IJ.log("\\Update:Processing Object {}/{}".format(x.index(point)+1,len(x)))
for time in point:
if len(time) < 10 and time != 'NA':
imp.setZ(int(round(float(z[x.index(point)][x[x.index(point)].index(time)]))))
imp.setT(x[x.index(point)].index(time)+1)
rm.add(imp,PointRoi(int(round(float(time))),int(round(float(y[x.index(point)][x[x.index(point)].index(time)])))),x.index(point)+1)
