def get_max_flow_values(G, use_node_capacities=True, use_node_demands=False):
'''
This runs a ford-fulkerson maximum flow algrothim over the provided network
and assigns the resulting flows to each edge. The flows for each node are
also calcualted and assigned.
'''
print G.edges()
#print G.edges()
if use_node_capacities == True:
G = convert_topo(G)
print G.edges()
exit()
#check for supply and demand nodes. Needs to be at least one of each.
#if more than one need to create a super source/sink(demand) nodes.
G, supply_nodes, demand_nodes, added_nodes, added_edges = check_for_demand_supply_nodes(
G)
#get supply node and demand node
supply_nd, demand_nd = get_check_supply_demand_nodes(
G, supply_nodes, demand_nodes, added_nodes)
if use_node_capacities == True and use_node_demands == False:
#this returns the maximum flow and the flow on each edge by node
#first check a path is possible - ford-fulkerson would just return 0 otherwise
path = nx.has_path(G, supply_nd, demand_nd)
if path == False:
raise error_classes.GeneralError(
'No path exists between the supply node (node %s) and the demand node (node %s).'
% (supply_nd, demand_nd))
max_flow, edge_flows = nx.ford_fulkerson(G, supply_nd, demand_nd,
'flow_capacity')
elif use_node_capacities == True and use_node_demands == True:
#returns the flow on each edge given capacities and demands
#the sum of the demand needs to equal the sum of the supply (indicated by a negative demand value)
edge_flows = nx.min_cost_flow(G, 'demand', 'flow_capacity', 'weight')
elif use_node_capacities == False and use_node_demands == True:
#returns the flow on each edge given demands (capacities should be set at 9999999 (a very high number))
edge_flows = nx.min_cost_flow(G, 'demand', 'flow_capacity', 'weight')
#assign flows to nodes and edges
G = assign_edge_node_flows(G, edge_flows)
#before running any analysis, need to remove the added nodes and edges - the super source/demand if used
G = remove_added_nodes_edges(G, added_edges, added_nodes)
node_flow_max, edge_flow_max = get_max_flows(G)
return G, {
'max_flow': max_flow,
'max_node_flow': node_flow_max,
'max_edge_flow': edge_flow_max
}
def test_digon(self):
"""Check if digons are handled properly. Taken from ticket
#618 by arv."""
nodes = [(1, {}),
(2, {'demand': -4}),
(3, {'demand': 4}),
]
edges = [(1, 2, {'capacity': 3, 'weight': 600000}),
(2, 1, {'capacity': 2, 'weight': 0}),
(2, 3, {'capacity': 5, 'weight': 714285}),
(3, 2, {'capacity': 2, 'weight': 0}),
]
G = nx.DiGraph(edges)
G.add_nodes_from(nodes)
flowCost, H = nx.network_simplex(G)
soln = {1: {2: 0},
2: {1: 0, 3: 4},
3: {2: 0}}
assert_equal(flowCost, 2857140)
assert_equal(nx.min_cost_flow_cost(G), 2857140)
assert_equal(H, soln)
assert_equal(nx.min_cost_flow(G), soln)
assert_equal(nx.cost_of_flow(G, H), 2857140)
flowCost, H = nx.capacity_scaling(G)
assert_equal(flowCost, 2857140)
assert_equal(H, soln)
assert_equal(nx.cost_of_flow(G, H), 2857140)
def test_digraph1(self):
# From Bradley, S. P., Hax, A. C. and Magnanti, T. L. Applied
# Mathematical Programming. Addison-Wesley, 1977.
G = nx.DiGraph()
G.add_node(1, demand=-20)
G.add_node(4, demand=5)
G.add_node(5, demand=15)
G.add_edges_from([(1, 2, {
'capacity': 15,
'weight': 4
}), (1, 3, {
'capacity': 8,
'weight': 4
}), (2, 3, {
'weight': 2
}), (2, 4, {
'capacity': 4,
'weight': 2
}), (2, 5, {
'capacity': 10,
'weight': 6
}), (3, 4, {
'capacity': 15,
'weight': 1
}), (3, 5, {
'capacity': 5,
'weight': 3
}), (4, 5, {
'weight': 2
}), (5, 3, {
'capacity': 4,
'weight': 1
})])
flowCost, H = nx.network_simplex(G)
soln = {
1: {
2: 12,
3: 8
},
2: {
3: 8,
4: 4,
5: 0
},
3: {
4: 11,
5: 5
},
4: {
5: 10
},
5: {
3: 0
}
}
assert_equal(flowCost, 150)
assert_equal(nx.min_cost_flow_cost(G), 150)
assert_equal(H, soln)
assert_equal(nx.min_cost_flow(G), soln)
assert_equal(nx.cost_of_flow(G, H), 150)
def test_digon(self):
"""Check if digons are handled properly. Taken from ticket
#618 by arv."""
nodes = [(1, {}),
(2, {'demand': -4}),
(3, {'demand': 4}),
]
edges = [(1, 2, {'capacity': 3, 'weight': 600000}),
(2, 1, {'capacity': 2, 'weight': 0}),
(2, 3, {'capacity': 5, 'weight': 714285}),
(3, 2, {'capacity': 2, 'weight': 0}),
]
G = nx.DiGraph(edges)
G.add_nodes_from(nodes)
flowCost, H = nx.network_simplex(G)
soln = {1: {2: 0},
2: {1: 0, 3: 4},
3: {2: 0}}
assert flowCost == 2857140
assert nx.min_cost_flow_cost(G) == 2857140
assert H == soln
assert nx.min_cost_flow(G) == soln
assert nx.cost_of_flow(G, H) == 2857140
flowCost, H = nx.capacity_scaling(G)
assert flowCost == 2857140
assert H == soln
assert nx.cost_of_flow(G, H) == 2857140
def checkFeasible(self):
G = nx.DiGraph()
totalQuantity = 0
totalPrice = 0
for bid in self.winningBids:
bidName = 'b' + str(bid[1])
G.add_edge('s', bidName)
totalPrice += self.cab.bidList[bid[1]].priceOfBid
for s in range(len(self.cab.bidList[bid[1]].listOfSubBids)):
subbidName = bidName + 's' + str(s)
quantity = self.cab.bidList[bid[1]].listOfSubBids[s].quantity
totalQuantity += quantity
G.add_edge(bidName, subbidName, capacity=quantity)
for i in self.cab.bidList[bid[1]].listOfSubBids[s].listOfItems:
itemName = 'r' + str(i)
unitOfItem = self.cab.itemList[i].numberOfUnits
G.add_edge(subbidName, itemName)
G.add_edge(itemName, 't', capacity=unitOfItem)
G.add_node('s', demand=-totalQuantity)
G.add_node('t', demand=totalQuantity)
try:
flowDict = nx.min_cost_flow(G)
self.maxValue = [self.maxValue,
totalPrice][self.maxValue < totalPrice]
return flowDict
except:
return False
def test_zero_capacity_edges(self):
"""Address issue raised in ticket #617 by arv."""
G = nx.DiGraph()
G.add_edges_from([(1, 2, {'capacity': 1, 'weight': 1}),
(1, 5, {'capacity': 1, 'weight': 1}),
(2, 3, {'capacity': 0, 'weight': 1}),
(2, 5, {'capacity': 1, 'weight': 1}),
(5, 3, {'capacity': 2, 'weight': 1}),
(5, 4, {'capacity': 0, 'weight': 1}),
(3, 4, {'capacity': 2, 'weight': 1})])
G.nodes[1]['demand'] = -1
G.nodes[2]['demand'] = -1
G.nodes[4]['demand'] = 2
flowCost, H = nx.network_simplex(G)
soln = {1: {2: 0, 5: 1},
2: {3: 0, 5: 1},
3: {4: 2},
4: {},
5: {3: 2, 4: 0}}
assert flowCost == 6
assert nx.min_cost_flow_cost(G) == 6
assert H == soln
assert nx.min_cost_flow(G) == soln
assert nx.cost_of_flow(G, H) == 6
flowCost, H = nx.capacity_scaling(G)
assert flowCost == 6
assert H == soln
assert nx.cost_of_flow(G, H) == 6
def minCostFlow(src,dst,bw,edges,all=False,factor=1):
#print "Find flow %s->%s: %s"%(src,dst,bw)
#for e in edges:
# print str(e)
G = nx.DiGraph()
G.add_node(src, demand = bw)
G.add_node(dst, demand = -bw)
vtoe={}
res=[]
for e in edges:
if(e.getAVLBW(all)>0):
# print "v1: %s v2: %s bw: %s cost: %s" %(e.v1,e.v2, e.getAVLBW(all),int((e.cost+e.beta)/factor))
# sys.stdout.flush()
G.add_edge(e.v1, e.v2, weight = int((e.cost+e.beta)/factor), capacity = e.getAVLBW(all))
G.add_edge(e.v2, e.v1, weight = int((e.cost+e.beta)/factor), capacity = e.getAVLBW(all))
vtoe[(e.v1,e.v2)]=e
vtoe[(e.v2,e.v1)]=e
try:
# print G.edges
flowDict = nx.min_cost_flow(G)
for k in flowDict:
for j in flowDict[k]:
if flowDict[k][j]>0:
res.append([vtoe[(k,j)],flowDict[k][j]])
except nx.exception.NetworkXUnfeasible:
print "No feasible Flow"
return res
def min_cost_flow(self):
def get_demand(flow_dict, node):
in_flow = sum(flow_dict[u][v][key]
for u, v, key in self.in_edges(node, keys=True))
out_flow = sum(flow_dict[u][v][key]
for u, v, key in self.out_edges(node, keys=True))
return in_flow - out_flow
def split(multi_flowG):
base_dict = coll.defaultdict(lambda: coll.defaultdict(dict))
new_mdg = nx.MultiDiGraph()
for u, v, key in multi_flowG.edges:
lowerbound = multi_flowG[u][v][key]['lowerbound']
base_dict[u][v][key] = lowerbound
new_mdg.add_edge(u, v, key,
capacity=multi_flowG[u][v][key]['capacity'] - lowerbound,
weight=multi_flowG[u][v][key]['weight'],
)
for node in multi_flowG:
new_mdg.nodes[node]['demand'] = \
multi_flowG.nodes[node]['demand'] - \
get_demand(base_dict, node)
return base_dict, new_mdg
base_dict, new_mdg = split(self)
flow_dict = nx.min_cost_flow(new_mdg)
for u, v, key in self.edges:
flow_dict[u][v][key] += base_dict[u][v][key]
self.cost = self.cost_of_flow(flow_dict)
return flow_dict
def test_digraph1(self):
# From Bradley, S. P., Hax, A. C. and Magnanti, T. L. Applied
# Mathematical Programming. Addison-Wesley, 1977.
G = nx.DiGraph()
G.add_node(1, demand=-20)
G.add_node(4, demand=5)
G.add_node(5, demand=15)
G.add_edges_from([(1, 2, {'capacity': 15, 'weight': 4}),
(1, 3, {'capacity': 8, 'weight': 4}),
(2, 3, {'weight': 2}),
(2, 4, {'capacity': 4, 'weight': 2}),
(2, 5, {'capacity': 10, 'weight': 6}),
(3, 4, {'capacity': 15, 'weight': 1}),
(3, 5, {'capacity': 5, 'weight': 3}),
(4, 5, {'weight': 2}),
(5, 3, {'capacity': 4, 'weight': 1})])
flowCost, H = nx.network_simplex(G)
soln = {1: {2: 12, 3: 8},
2: {3: 8, 4: 4, 5: 0},
3: {4: 11, 5: 5},
4: {5: 10},
5: {3: 0}}
assert_equal(flowCost, 150)
assert_equal(nx.min_cost_flow_cost(G), 150)
assert_equal(H, soln)
assert_equal(nx.min_cost_flow(G), soln)
assert_equal(nx.cost_of_flow(G, H), 150)
flowCost, H = nx.capacity_scaling(G)
assert_equal(flowCost, 150)
assert_equal(H, soln)
assert_equal(nx.cost_of_flow(G, H), 150)
def test_zero_capacity_edges(self):
"""Address issue raised in ticket #617 by arv."""
G = nx.DiGraph()
G.add_edges_from([(1, 2, {'capacity': 1, 'weight': 1}),
(1, 5, {'capacity': 1, 'weight': 1}),
(2, 3, {'capacity': 0, 'weight': 1}),
(2, 5, {'capacity': 1, 'weight': 1}),
(5, 3, {'capacity': 2, 'weight': 1}),
(5, 4, {'capacity': 0, 'weight': 1}),
(3, 4, {'capacity': 2, 'weight': 1})])
G.nodes[1]['demand'] = -1
G.nodes[2]['demand'] = -1
G.nodes[4]['demand'] = 2
flowCost, H = nx.network_simplex(G)
soln = {1: {2: 0, 5: 1},
2: {3: 0, 5: 1},
3: {4: 2},
4: {},
5: {3: 2, 4: 0}}
assert_equal(flowCost, 6)
assert_equal(nx.min_cost_flow_cost(G), 6)
assert_equal(H, soln)
assert_equal(nx.min_cost_flow(G), soln)
assert_equal(nx.cost_of_flow(G, H), 6)
flowCost, H = nx.capacity_scaling(G)
assert_equal(flowCost, 6)
assert_equal(H, soln)
assert_equal(nx.cost_of_flow(G, H), 6)
def assignLB ( problem ):
"""
Uses networkx min_cost_flow algorithm for computes the assignment
lower bound. Alternatively, also networkx network simplex algorithm
could be used instead.
Parameters:
problem : class
The TSP problem object has returned by function load_problem
of package tsplib95.
Returns:
cost : int
The lower bound (objective value of the assignment problem).
elist : list of int
The list of edges in the assignment.
"""
# Solve assignment problem as a minimum-cost network flow problem
n = problem.dimension
G = nx.DiGraph()
for i in problem.get_nodes(): G.add_node(i, demand = -1 )
for j in problem.get_nodes(): G.add_node(j+n, demand = 1 )
for i in problem.get_nodes():
for j in problem.get_nodes():
if i != j:
G.add_edge(i,j+n, weight=problem.wfunc(i,j), capacity = n+1 )
flow = nx.min_cost_flow( G )
cost = nx.cost_of_flow(G,flow)
# Retrieve list of edges in the assignment
elist = [ (e[0],e[1]-n) for e in G.edges if flow[e[0]][e[1]] > 0 ]
return cost, elist
def constrained_kmeans(data, demand, maxiter=None, fixedprec=1e9):
data = np.array(data)
min_ = np.min(data, axis=0)
max_ = np.max(data, axis=0)
c = min_ + np.random.random((len(demand), data.shape[1])) * (max_ - min_)
m = np.array([-1] * len(data), dtype=np.int)
itercnt = 0
while True:
itercnt += 1
# memberships
g = nx.DiGraph()
g.add_nodes_from(xrange(0, data.shape[0]), demand=-1) # points
for i in xrange(0, len(c)):
g.add_node(len(data) + i, demand=demand[i])
# Calculating cost...
cost = np.array([np.linalg.norm(
np.tile(data.T, len(c)).T - np.tile(c, len(data)).reshape(len(c) * len(data), c.shape[1]), axis=1)])
# Preparing data_to_c_edges...
data_to_c_edges = np.concatenate((np.tile([xrange(0, data.shape[0])], len(c)).T,
np.tile(np.array([xrange(data.shape[0], data.shape[0] + c.shape[0])]).T,
len(data)).reshape(len(c) * len(data), 1), cost.T * fixedprec),
axis=1).astype(np.uint64)
# Adding to graph
g.add_weighted_edges_from(data_to_c_edges)
a = len(data) + len(c)
g.add_node(a, demand=len(data) - np.sum(demand))
c_to_a_edges = np.concatenate((np.array([xrange(len(data), len(data) + len(c))]).T, np.tile([[a]], len(c)).T),
axis=1)
g.add_edges_from(c_to_a_edges)
# Calculating min cost flow...
f = nx.min_cost_flow(g)
# assign
m_new = np.ones(len(data), dtype=np.int) * -1
for i in xrange(len(data)):
p = sorted(f[i].iteritems(), key=lambda x: x[1])[-1][0]
m_new[i] = p - len(data)
# stop condition
if np.all(m_new == m):
# Stop
return c, m, f
m = m_new
# compute new centers
for i in xrange(len(c)):
c[i, :] = np.mean(data[m == i, :], axis=0)
if maxiter is not None and itercnt >= maxiter:
# Max iterations reached
return c, m, f
def schedule(self):
'''
computes a MCNF
rtype: dict of dicts
'''
diff = self.necessary_supply - self.necessary_demand
self.network.nodes['s']['demand'] = -self.total
self.network.nodes['t']['demand'] = self.total + diff
return networkx.min_cost_flow(self.network)
def constrained_kmeans(data, demand, maxiter=None, fixedprec=1e9): data = np.array(data) min_ = np.min(data, axis = 0) max_ = np.max(data, axis = 0) C = min_ + np.random.random((len(demand), data.shape[1])) * (max_ - min_) M = np.array([-1] * len(data), dtype=np.int) itercnt = 0 while True: itercnt += 1 # memberships g = nx.DiGraph() g.add_nodes_from(xrange(0, data.shape[0]), demand=-1) # points for i in xrange(0, len(C)): g.add_node(len(data) + i, demand=demand[i]) # Calculating cost... cost = np.array([np.linalg.norm(np.tile(data.T, len(C)).T - np.tile(C, len(data)).reshape(len(C) * len(data), C.shape[1]), axis=1)]) # Preparing data_to_C_edges... data_to_C_edges = np.concatenate((np.tile([xrange(0, data.shape[0])], len(C)).T, np.tile(np.array([xrange(data.shape[0], data.shape[0] + C.shape[0])]).T, len(data)).reshape(len(C) * len(data), 1), cost.T * fixedprec), axis=1).astype(np.uint64) # Adding to graph g.add_weighted_edges_from(data_to_C_edges) a = len(data) + len(C) g.add_node(a, demand=len(data)-np.sum(demand)) C_to_a_edges = np.concatenate((np.array([xrange(len(data), len(data) + len(C))]).T, np.tile([[a]], len(C)).T), axis=1) g.add_edges_from(C_to_a_edges) # Calculating min cost flow... f = nx.min_cost_flow(g) # assign M_new = np.ones(len(data), dtype=np.int) * -1 for i in xrange(len(data)): p = sorted(f[i].iteritems(), key=lambda x: x[1])[-1][0] M_new[i] = p - len(data) # stop condition if np.all(M_new == M): # Stop return (C, M, f) M = M_new # compute new centers for i in xrange(len(C)): C[i, :] = np.mean(data[M==i, :], axis=0) if maxiter is not None and itercnt >= maxiter: # Max iterations reached return (C, M, f)
def remake_to_labelorder(pred_tensor: torch.tensor,
label_tensor: torch.tensor) -> dict:
pred_ = pred_tensor.cuda().cpu().detach().numpy().copy()
pred_ = np.array([np.argmax(i) for i in pred_])
label_ = label_tensor.cuda().cpu().detach().numpy().copy()
n_of_clusters = max(label_) + 1
pred_ids, label_ids = {}, {}
for vid, (pred_id, label_id) in enumerate(zip(pred_, label_)):
if (pred_id in pred_ids):
pred_ids[pred_id].append(vid)
else:
pred_ids[pred_id] = []
pred_ids[pred_id].append(vid)
if (label_id in label_ids):
label_ids[label_id].append(vid)
else:
label_ids[label_id] = []
label_ids[label_id].append(vid)
pred_pairs, label_pairs = [set() for _ in range(n_of_clusters)
], [set() for _ in range(n_of_clusters)]
for pred_key, label_key in zip(pred_ids.keys(), label_ids.keys()):
pred_pairs[pred_key] |= set(
[pair for pair in itertools.combinations(pred_ids[pred_key], 2)])
label_pairs[label_key] |= set(
[pair for pair in itertools.combinations(label_ids[label_key], 2)])
table = np.array(
[[len(label_pair & pred_pair) for label_pair in label_pairs]
for pred_pair in pred_pairs])
G = nx.DiGraph()
G.add_node('s', demand=-n_of_clusters)
G.add_node('t', demand=n_of_clusters)
for pred_id in range(n_of_clusters):
G.add_edge('s', 'p_{}'.format(pred_id), weight=0, capacity=1)
for source, weights in enumerate(table):
for target, w in enumerate(weights):
G.add_edge('p_{}'.format(source),
'l_{}'.format(target),
weight=-w,
capacity=1)
for label_id in range(n_of_clusters):
G.add_edge('l_{}'.format(label_id), 't', weight=0, capacity=1)
clus_label_map = {}
result = nx.min_cost_flow(G)
for i, d in result.items():
for j, f in d.items():
if f and i[0] == 'p' and j[0] == 'l':
clus_label_map[int(i[2])] = int(j[2])
w = torch.FloatTensor(
[[1 if j == clus_label_map[i] else 0 for j in range(n_of_clusters)]
for i in range(n_of_clusters)]).cuda()
return torch.mm(pred_tensor, w)
def getConsumerDicts(self, start, stop):
consumerDicts = []
for currentSlice in range(start, stop):
_demands, _locations, _ids = self.getTimeSliceData(currentSlice)
G = self.generateGraph(_demands, _locations, _ids)
_flowDict = nx.min_cost_flow(G)
_consumerDict = self.flowToConsumerDict(_flowDict, G)
_consumerDict['graph'] = G
_consumerDict['flowDict'] = _flowDict
consumerDicts.append(_consumerDict)
return consumerDicts
def get_flow_per_edge(idle_drivers, arriving_drivers, expected_orders,
superworld):
'''
:param idle_drivers: a vector of idle drivers per supernode in the current time step
:param arriving_drivers: a vector of drivers that arrive due to customers in the next time step
:param expected_orders: a vector of number of orders expected in the next time step
:param superworld: a superworld
:returns: a dict keyed by [node1][node2] with number of cars to be travelled
'''
directed_superworld = nx.DiGraph(superworld)
idle_drivers = np.array(idle_drivers)
arriving_drivers = np.array(arriving_drivers)
expected_orders = np.array(expected_orders)
assert np.sum(idle_drivers) > 0
if np.sum(expected_orders) == 0:
expected_orders = np.ones(
expected_orders.shape) # aim for a uniform driver distribution
expected_orders = expected_orders / np.sum(expected_orders)
total_drivers_with_arriving = np.sum(idle_drivers + arriving_drivers)
# distribute drivers according to customers
required_drivers = np.array([
int(n * total_drivers_with_arriving) for n in expected_orders
]) # rounds down
required_drivers -= arriving_drivers # substract those we can not control
# we might end up with negative values, because too many are arriving at the same place, for example
# or with positive, becauce of rounding up/down
# randomly assign or substract excess drivers
required_drivers[required_drivers < 0] = 0
total_idle_drivers = np.sum(idle_drivers)
s = np.sum(required_drivers)
while total_idle_drivers - s != 0:
ind = np.nonzero(required_drivers)
a = np.random.choice(ind[0])
required_drivers[a] += (total_idle_drivers -
s) / np.abs(total_idle_drivers - s)
s = np.sum(required_drivers)
# set demand property on superworld graph and solve mincostflow
nx.set_edge_attributes(
directed_superworld, 1,
name='weight') # assume approximately equal distances
demand = required_drivers - idle_drivers # positive demand = inflow
assert np.sum(demand) == 0
nx.set_node_attributes(directed_superworld,
{i: demand[i]
for i in range(len(demand))}, "demand")
flow_per_edge_dict = nx.min_cost_flow(directed_superworld,
demand='demand',
weight='weight')
return flow_per_edge_dict
def assign(photos, pois):
"""Assign photos to POIs with minimum cost"""
#REF: en.wikipedia.org/wiki/Minimum-cost_flow_problem
#assert(len(photos) == len(pois))
dists = np.zeros((len(photos), len(pois)), dtype=np.float64)
for i, d in enumerate(photos):
for j, p in enumerate(pois):
dists[i, j] = round(math.sqrt( (d[0] - p[0])**2 + (d[1] - p[1])**2 ))
#print(dists)
G = nx.DiGraph()
# complete bipartite graph: photo -> POI
# infinity capacity
for i in range(len(photos)):
for j in range(len(pois)):
u = 'd' + str(i)
v = 'p' + str(j)
G.add_edge(u, v, weight=dists[i, j])
# source -> photo
# capacity = 1
for i in range(len(photos)):
u = 's'
v = 'd' + str(i)
G.add_edge(u, v, capacity=1, weight=0)
# POI -> sink
# infinity capacity
for j in range(len(pois)):
u = 'p' + str(j)
v = 't'
G.add_edge(u, v, weight=0)
# demand for source and sink
G.add_node('s', demand=-len(photos))
G.add_node('t', demand=len(photos))
#print(G.nodes())
#print(G.edges())
flowDict = nx.min_cost_flow(G)
assignment = dict()
for e in G.edges():
u = e[0]
v = e[1]
if u != 's' and v != 't' and flowDict[u][v] > 0:
#print(e, flowDict[u][v])
assignment[u] = v
return assignment
def make_pred_label_map(pred_: list, label_: list) -> dict:
pred_ids, label_ids = {}, {}
for vid, (pred_id, label_id) in enumerate(zip(pred_, label_)):
if (pred_id in pred_ids):
pred_ids[pred_id].append(vid)
else:
pred_ids[pred_id] = []
pred_ids[pred_id].append(vid)
if (label_id in label_ids):
label_ids[label_id].append(vid)
else:
label_ids[label_id] = []
label_ids[label_id].append(vid)
pred_pairs, label_pairs = [None
for _ in range(3)], [None for _ in range(3)]
for pred_key, label_key in zip(pred_ids.keys(), label_ids.keys()):
pred_pairs[pred_key] = set(
[pair for pair in itertools.combinations(pred_ids[pred_key], 2)])
label_pairs[label_key] = set(
[pair for pair in itertools.combinations(label_ids[label_key], 2)])
table = np.array(
[[len(label_pair & pred_pair) for label_pair in label_pairs]
for pred_pair in pred_pairs])
G = nx.DiGraph()
with open('./test.csv', 'r') as r:
n_preds, n_labels = table.shape[0], table.shape[1]
G.add_node('s', demand=-n_preds)
G.add_node('t', demand=n_labels)
for pred_id in range(n_preds):
G.add_edge('s', 'p_{}'.format(pred_id), weight=0, capacity=1)
for source, weights in enumerate(table):
for target, w in enumerate(weights):
G.add_edge('p_{}'.format(source),
'l_{}'.format(target),
weight=-w,
capacity=1)
for label_id in range(n_labels):
G.add_edge('l_{}'.format(label_id), 't', weight=0, capacity=1)
clus_label_map = {}
result = nx.min_cost_flow(G)
for i, d in result.items():
for j, f in d.items():
if f and i[0] == 'p' and j[0] == 'l':
clus_label_map[int(i[2])] = int(j[2])
return clus_label_map
def test_simple_digraph(self):
G = nx.DiGraph()
G.add_node('a', demand=-5)
G.add_node('d', demand=5)
G.add_edge('a', 'b', weight=3, capacity=4)
G.add_edge('a', 'c', weight=6, capacity=10)
G.add_edge('b', 'd', weight=1, capacity=9)
G.add_edge('c', 'd', weight=2, capacity=5)
flowCost, H = nx.network_simplex(G)
soln = {'a': {'b': 4, 'c': 1}, 'b': {'d': 4}, 'c': {'d': 1}, 'd': {}}
assert_equal(flowCost, 24)
assert_equal(nx.min_cost_flow_cost(G), 24)
assert_equal(H, soln)
assert_equal(nx.min_cost_flow(G), soln)
assert_equal(nx.cost_of_flow(G, H), 24)
def get_path(self):
new_G = self._add_end_node()
flow_dict = nx.min_cost_flow(new_G)
path = []
before_node_name = "s"
while True:
edges = flow_dict[before_node_name]
for node_name, flow in edges.items():
if flow == 1:
if node_name == "e":
return path
node = self.nodes_dict[node_name]
path.append(node.data["bbox"])
before_node_name = node_name
break
def test_transshipment(self):
G = nx.DiGraph()
G.add_node("a", demand=1)
G.add_node("b", demand=-2)
G.add_node("c", demand=-2)
G.add_node("d", demand=3)
G.add_node("e", demand=-4)
G.add_node("f", demand=-4)
G.add_node("g", demand=3)
G.add_node("h", demand=2)
G.add_node("r", demand=3)
G.add_edge("a", "c", weight=3)
G.add_edge("r", "a", weight=2)
G.add_edge("b", "a", weight=9)
G.add_edge("r", "c", weight=0)
G.add_edge("b", "r", weight=-6)
G.add_edge("c", "d", weight=5)
G.add_edge("e", "r", weight=4)
G.add_edge("e", "f", weight=3)
G.add_edge("h", "b", weight=4)
G.add_edge("f", "d", weight=7)
G.add_edge("f", "h", weight=12)
G.add_edge("g", "d", weight=12)
G.add_edge("f", "g", weight=-1)
G.add_edge("h", "g", weight=-10)
flowCost, H = nx.network_simplex(G)
soln = {
"a": {"c": 0},
"b": {"a": 0, "r": 2},
"c": {"d": 3},
"d": {},
"e": {"r": 3, "f": 1},
"f": {"d": 0, "g": 3, "h": 2},
"g": {"d": 0},
"h": {"b": 0, "g": 0},
"r": {"a": 1, "c": 1},
}
assert flowCost == 41
assert nx.min_cost_flow_cost(G) == 41
assert H == soln
assert nx.min_cost_flow(G) == soln
assert nx.cost_of_flow(G, H) == 41
flowCost, H = nx.capacity_scaling(G)
assert flowCost == 41
assert nx.cost_of_flow(G, H) == 41
assert H == soln
def nxGraph(self, data):
bs = data.shape[0]
G = nx.DiGraph()
G.add_node('s', demand=-int(bs ** 2 / 2))
G.add_node('t', demand=int(bs ** 2 / 2))
names = []
for i in range(bs):
G.add_edge('s', 'row' + str(i), capacity=self.topk, weight=0)
G.add_edge('col' + str(i), 't', capacity=self.topk, weight=0)
for j in range(bs):
G.add_edge('row' + str(i), 'col' + str(j), capacity=1, weight=data[i, j].numpy())
names.append('row' + str(i))
dictMinFLow = nx.min_cost_flow(G)
mask = []
for w in names:
mask.append(list(dictMinFLow[w].values()))
return np.array(mask)
def execute(self):
solution = nx.min_cost_flow(self.network)
print("----------------- networkx o-d | original event | cost ------------------")
for node_origen in solution.keys():
for node_destination in solution[node_origen].keys():
print(node_origen, node_destination, "|",
self.network[node_origen][node_destination]['original_events'], "|",
solution[node_origen][node_destination])
print("-------------- solution arcs -----------------")
for node_origen in solution.keys():
for node_destination in solution[node_origen].keys():
if solution[node_origen][node_destination] > 0 or self.network[node_origen][node_destination]['capacity'] == 0:
print(node_origen, node_destination, "|",
self.network[node_origen][node_destination]['original_events'], "|",
solution[node_origen][node_destination])
self.network[node_origen][node_destination]['color'] = 'red' if solution[node_origen][node_destination] > 0 else 'green'
print("---------------------------------------------")
def test_transshipment(self):
G = nx.DiGraph()
G.add_node('a', demand=1)
G.add_node('b', demand=-2)
G.add_node('c', demand=-2)
G.add_node('d', demand=3)
G.add_node('e', demand=-4)
G.add_node('f', demand=-4)
G.add_node('g', demand=3)
G.add_node('h', demand=2)
G.add_node('r', demand=3)
G.add_edge('a', 'c', weight=3)
G.add_edge('r', 'a', weight=2)
G.add_edge('b', 'a', weight=9)
G.add_edge('r', 'c', weight=0)
G.add_edge('b', 'r', weight=-6)
G.add_edge('c', 'd', weight=5)
G.add_edge('e', 'r', weight=4)
G.add_edge('e', 'f', weight=3)
G.add_edge('h', 'b', weight=4)
G.add_edge('f', 'd', weight=7)
G.add_edge('f', 'h', weight=12)
G.add_edge('g', 'd', weight=12)
G.add_edge('f', 'g', weight=-1)
G.add_edge('h', 'g', weight=-10)
flowCost, H = nx.network_simplex(G)
soln = {'a': {'c': 0},
'b': {'a': 0, 'r': 2},
'c': {'d': 3},
'd': {},
'e': {'r': 3, 'f': 1},
'f': {'d': 0, 'g': 3, 'h': 2},
'g': {'d': 0},
'h': {'b': 0, 'g': 0},
'r': {'a': 1, 'c': 1}}
assert flowCost == 41
assert nx.min_cost_flow_cost(G) == 41
assert H == soln
assert nx.min_cost_flow(G) == soln
assert nx.cost_of_flow(G, H) == 41
flowCost, H = nx.capacity_scaling(G)
assert flowCost == 41
assert nx.cost_of_flow(G, H) == 41
assert H == soln
def test_transshipment(self):
G = nx.DiGraph()
G.add_node('a', demand=1)
G.add_node('b', demand=-2)
G.add_node('c', demand=-2)
G.add_node('d', demand=3)
G.add_node('e', demand=-4)
G.add_node('f', demand=-4)
G.add_node('g', demand=3)
G.add_node('h', demand=2)
G.add_node('r', demand=3)
G.add_edge('a', 'c', weight=3)
G.add_edge('r', 'a', weight=2)
G.add_edge('b', 'a', weight=9)
G.add_edge('r', 'c', weight=0)
G.add_edge('b', 'r', weight=-6)
G.add_edge('c', 'd', weight=5)
G.add_edge('e', 'r', weight=4)
G.add_edge('e', 'f', weight=3)
G.add_edge('h', 'b', weight=4)
G.add_edge('f', 'd', weight=7)
G.add_edge('f', 'h', weight=12)
G.add_edge('g', 'd', weight=12)
G.add_edge('f', 'g', weight=-1)
G.add_edge('h', 'g', weight=-10)
flowCost, H = nx.network_simplex(G)
soln = {'a': {'c': 0},
'b': {'a': 0, 'r': 2},
'c': {'d': 3},
'd': {},
'e': {'r': 3, 'f': 1},
'f': {'d': 0, 'g': 3, 'h': 2},
'g': {'d': 0},
'h': {'b': 0, 'g': 0},
'r': {'a': 1, 'c': 1}}
assert_equal(flowCost, 41)
assert_equal(nx.min_cost_flow_cost(G), 41)
assert_equal(H, soln)
assert_equal(nx.min_cost_flow(G), soln)
assert_equal(nx.cost_of_flow(G, H), 41)
flowCost, H = nx.capacity_scaling(G)
assert_equal(flowCost, 41)
assert_equal(nx.cost_of_flow(G, H), 41)
assert_equal(H, soln)
def MinCostFlow(
dfnd,
dfed,
node_label="id",
demand_label="demand",
from_label="node1",
to_label="node2",
weight_label="weight",
capacity_label="capacity",
flow_label="flow",
**kwargs,
):
"""
最小費用流問題
入力
dfnd: 点のDataFrameもしくはCSVファイル名
dfed: 辺のDataFrameもしくはCSVファイル名(有向)
node_label: 点IDの属性文字
demand_label: 需要の属性文字
from_label: 元点の属性文字
to_label: 先点の属性文字
weight_label: 辺の重みの属性文字
capacity_label: 辺の容量の属性文字
flow_label: 辺の流量の属性文字(結果)
出力
辺のDataFrame
"""
g, dfnd, dfed = graph_from_table(
dfnd,
dfed,
True,
node_label=node_label,
from_label=from_label,
to_label=to_label,
**kwargs,
)
t = nx.min_cost_flow(g,
demand=demand_label,
capacity=capacity_label,
weight=weight_label)
dftmp = pd.DataFrame(
[(i, j, f) for i, d in t.items() for j, f in d.items() if f],
columns=[from_label, to_label, flow_label],
)
return pd.merge(dfed, dftmp)
def resolver_pfmc(abastecimiento, encuentro, transporte, inventario) :
abastecimientos = abrir(f"Instancias/{abastecimiento}")
encuentros = abrir(f"Instancias/{encuentro}")
transporte = abrir (f"Instancias/{transporte}")
inventario = abrir (f"Instancias/{inventario}")
#crea un grafo con los datos de las intancias
G = crear_grafo(abastecimientos,encuentros,transporte,inventario)
flowDict = nx.min_cost_flow(G)
"""BONUS: grafica con solo los nodos"""
grafico = Graficar(G,solo_nodos=True)
grafico.title("Representacion Completa Solo Nodos")
grafico.savefig("representacion_completa_solo_nodos.png")
grafico.show()
flow_to_xlsx(flowDict,"Resultado.xlsx")
#guarda el resultado en el archivo resultado.txt
with open('resultado.txt', 'w') as outfile:
json.dump(flowDict, outfile)
return flowDict
def test_simple_digraph(self):
G = nx.DiGraph()
G.add_node('a', demand = -5)
G.add_node('d', demand = 5)
G.add_edge('a', 'b', weight = 3, capacity = 4)
G.add_edge('a', 'c', weight = 6, capacity = 10)
G.add_edge('b', 'd', weight = 1, capacity = 9)
G.add_edge('c', 'd', weight = 2, capacity = 5)
flowCost, H = nx.network_simplex(G)
soln = {'a': {'b': 4, 'c': 1},
'b': {'d': 4},
'c': {'d': 1},
'd': {}}
assert_equal(flowCost, 24)
assert_equal(nx.min_cost_flow_cost(G), 24)
assert_equal(H, soln)
assert_equal(nx.min_cost_flow(G), soln)
assert_equal(nx.cost_of_flow(G, H), 24)
def bend(self):
"""
Computes a minimal size set of edge bends that allows the link diagram
to be embedded orthogonally. This follows directly Tamassia's first
paper.
"""
N = self.face_network
flow = networkx.min_cost_flow(N)
for a, flows in flow.iteritems():
for b, w_a in flows.iteritems():
if w_a and set(['s', 't']).isdisjoint(set([a, b])):
w_b = flow[b][a]
A, B = self[a], self[b]
e_a, e_b = A.edge_of_intersection(B)
turns_a = w_a*[1] + w_b*[-1]
turns_b = w_b*[1] + w_a*[-1]
subdivide_edge(e_a, len(turns_a))
A.bend(e_a, turns_a)
B.bend(e_b, turns_b)
def test_simple_digraph(self):
G = nx.DiGraph()
G.add_node('a', demand=-5)
G.add_node('d', demand=5)
G.add_edge('a', 'b', weight=3, capacity=4)
G.add_edge('a', 'c', weight=6, capacity=10)
G.add_edge('b', 'd', weight=1, capacity=9)
G.add_edge('c', 'd', weight=2, capacity=5)
flowCost, H = nx.network_simplex(G)
soln = {'a': {'b': 4, 'c': 1}, 'b': {'d': 4}, 'c': {'d': 1}, 'd': {}}
assert flowCost == 24
assert nx.min_cost_flow_cost(G) == 24
assert H == soln
assert nx.min_cost_flow(G) == soln
assert nx.cost_of_flow(G, H) == 24
flowCost, H = nx.capacity_scaling(G)
assert flowCost == 24
assert nx.cost_of_flow(G, H) == 24
assert H == soln
def test_simple_digraph(self):
G = nx.DiGraph()
G.add_node("a", demand=-5)
G.add_node("d", demand=5)
G.add_edge("a", "b", weight=3, capacity=4)
G.add_edge("a", "c", weight=6, capacity=10)
G.add_edge("b", "d", weight=1, capacity=9)
G.add_edge("c", "d", weight=2, capacity=5)
flowCost, H = nx.network_simplex(G)
soln = {"a": {"b": 4, "c": 1}, "b": {"d": 4}, "c": {"d": 1}, "d": {}}
assert flowCost == 24
assert nx.min_cost_flow_cost(G) == 24
assert H == soln
assert nx.min_cost_flow(G) == soln
assert nx.cost_of_flow(G, H) == 24
flowCost, H = nx.capacity_scaling(G)
assert flowCost == 24
assert nx.cost_of_flow(G, H) == 24
assert H == soln
def print_stats(G):
try:
calculate_demand(G)
print("min_cost_flow")
# https://networkx.github.io/documentation/stable/reference/algorithms/generated/networkx.algorithms.flow.min_cost_flow.html#networkx.algorithms.flow.min_cost_flow
# demand maybe from strongly_connected_components
print(nx.min_cost_flow(G, capacity="inverse_weight", weight="weight"))
print("pagerank")
print(nx.pagerank(G))
print("average_node_connectivity")
print(nx.average_node_connectivity(G))
print("dominating_set")
print(nx.dominating_set(G))
print("strongly_connected_components")
print(list(nx.strongly_connected_components(G)))
except Exception:
pass
def test_transshipment(self):
G = nx.DiGraph()
G.add_node('a', demand = 1)
G.add_node('b', demand = -2)
G.add_node('c', demand = -2)
G.add_node('d', demand = 3)
G.add_node('e', demand = -4)
G.add_node('f', demand = -4)
G.add_node('g', demand = 3)
G.add_node('h', demand = 2)
G.add_node('r', demand = 3)
G.add_edge('a', 'c', weight = 3)
G.add_edge('r', 'a', weight = 2)
G.add_edge('b', 'a', weight = 9)
G.add_edge('r', 'c', weight = 0)
G.add_edge('b', 'r', weight = -6)
G.add_edge('c', 'd', weight = 5)
G.add_edge('e', 'r', weight = 4)
G.add_edge('e', 'f', weight = 3)
G.add_edge('h', 'b', weight = 4)
G.add_edge('f', 'd', weight = 7)
G.add_edge('f', 'h', weight = 12)
G.add_edge('g', 'd', weight = 12)
G.add_edge('f', 'g', weight = -1)
G.add_edge('h', 'g', weight = -10)
flowCost, H = nx.network_simplex(G)
soln = {'a': {'c': 0},
'b': {'a': 0, 'r': 2},
'c': {'d': 3},
'd': {},
'e': {'r': 3, 'f': 1},
'f': {'d': 0, 'g': 3, 'h': 2},
'g': {'d': 0},
'h': {'b': 0, 'g': 0},
'r': {'a': 1, 'c': 1}}
assert_equal(flowCost, 41)
assert_equal(nx.min_cost_flow_cost(G), 41)
assert_equal(H, soln)
assert_equal(nx.min_cost_flow(G), soln)
assert_equal(nx.cost_of_flow(G, H), 41)
def grafico_pfmc():
#le cambie los valores para que tuviera solucion
encuentros = {'e0': {'t0': 22, 't1': 16}, 'e1': {'t0': 34, 't1': 26}}
abastecimientos = {'a0': {'t0': 720, 't1': 586}, 'a1': {'t0': 561, 't1': 985}}
transporte = {'a0': {'e0': (5, 32), 'e1': (6, 43)},'a1': {'e0': (7, 67), 'e1': (8, 36)}}
inventario = {'a0': (0, 427), 'a1': (0, 445)}
G = crear_grafo(abastecimientos,encuentros,transporte,inventario)
grafico = Graficar(G)
grafico.title("Representacion Simple")
grafico.savefig("representacion_simple.png")
grafico.show()
""" Bonus: Esto resuleve el PFMC del ejemplo chico y lo grafica, podria mostrar las
cantidades de flujo en el grafico pero no nos dan puntaje por eso"""
flowDict = nx.min_cost_flow(G)
flow_to_xlsx(flowDict,"Resultado Simple.xlsx") #lo paso a excel
with open('resultado_simple.txt', 'w') as outfile: # y a txt pot si acaso
json.dump(flowDict, outfile)
grafico = Graficar(G,flowDict)
grafico.title("Solucion Simple")
grafico.savefig("solucion_simple.png")
grafico.show()
def test_digraph1(self):
# From Bradley, S. P., Hax, A. C. and Magnanti, T. L. Applied
# Mathematical Programming. Addison-Wesley, 1977.
G = nx.DiGraph()
G.add_node(1, demand=-20)
G.add_node(4, demand=5)
G.add_node(5, demand=15)
G.add_edges_from(
[
(1, 2, {"capacity": 15, "weight": 4}),
(1, 3, {"capacity": 8, "weight": 4}),
(2, 3, {"weight": 2}),
(2, 4, {"capacity": 4, "weight": 2}),
(2, 5, {"capacity": 10, "weight": 6}),
(3, 4, {"capacity": 15, "weight": 1}),
(3, 5, {"capacity": 5, "weight": 3}),
(4, 5, {"weight": 2}),
(5, 3, {"capacity": 4, "weight": 1}),
]
)
flowCost, H = nx.network_simplex(G)
soln = {
1: {2: 12, 3: 8},
2: {3: 8, 4: 4, 5: 0},
3: {4: 11, 5: 5},
4: {5: 10},
5: {3: 0},
}
assert flowCost == 150
assert nx.min_cost_flow_cost(G) == 150
assert H == soln
assert nx.min_cost_flow(G) == soln
assert nx.cost_of_flow(G, H) == 150
flowCost, H = nx.capacity_scaling(G)
assert flowCost == 150
assert H == soln
assert nx.cost_of_flow(G, H) == 150
def is_flow_feasible(m, ResMastery, SkillReq, SkillSet):
Resources = range(m)
# initialise directed graph to run flow algorithm on
G = nx.DiGraph()
G.add_node('s', demand=-np.sum(SkillReq)) # source
G.add_node('t', demand= np.sum(SkillReq)) # sink
# pdb.set_trace()
UsefulRes = find_useful_resources(Resources, ResMastery, SkillSet)
# define resource nodes and edges from the source to resources
for res in UsefulRes:
G.add_node(res, demand=0)
G.add_edge('s', res, weight=0, capacity=1)
# define required skill nodes and edges from skills to sink node
for skill in SkillSet:
# offset the index by the # of res
G.add_node(skill+m, demand=0)
G.add_edge(skill+m, 't', weight=0, capacity=SkillReq[skill])
# define the edges between the resource and the skill nodes
for res in Resources:
for skill in SkillSet:
if ResMastery[res][skill] == 1:
G.add_edge(res, skill+m, weight=0, capacity=1)
# pdb.set_trace()
try:
flowDict = nx.min_cost_flow(G)
except nx.exception.NetworkXUnfeasible:
return False
return True
def constrcut_flow_graph(reach_graph,sorted_bbox,flow_graph=None,scores=None):
def to_left_node(index):
return 2*index+1
def to_right_node(index):
return 2*index+2
def scale_to_int(score):
MAX_VALUE = 10000
return int(score*MAX_VALUE)
def compute_box_center(box):
center_y = (box[3]+box[1])/2
center_x = (box[2]+box[0])/2
return center_x,center_y
def get_data_cost(score):
return scale_to_int(score)
def get_smoothness_cost(box1, box2):
alpha=0.0
h1=box1[3]-box1[1]+1
h2=box2[3]-box2[1]+1
x1, y1=compute_box_center(box1)
x2, y2=compute_box_center(box2)
d=((x1-x2)**2+(y1-y2)**2)**0.5/min(h1,h2)
s=float(abs(h1-h2))/min(h1, h2)
return scale_to_int(alpha*d+(1-alpha)*s)
def get_entry_cost(index,reach_graph,scores):
reach_node_costs = [scores[left] for left, right in reach_graph.edges() if right == index]
sorted_costs = sorted(reach_node_costs)
if len(sorted_costs) > 0:
cost = scale_to_int(-sorted_costs[-1])
else:
cost = 0
return cost
def get_exit_cost(index,reach_graph,scores):
reach_node_costs = [scores[right] for left, right in reach_graph.edges() if left == index]
sorted_costs = sorted(reach_node_costs)
if len(sorted_costs) > 0:
cost = scale_to_int(-sorted_costs[-1])
else:
cost = 0
return cost
def overlaps(box1,box2):
h1=box1[3]-box1[1]+1
h2=box2[3]-box2[1]+1
overlaps=min(box2[3], box1[3])-max(box1[1], box2[1])
overlaps=overlaps if overlaps>0 else 0
return float(overlaps)/h2
length = len(sorted_bbox)
scores = [-1 for i in range(length)]
if flow_graph == None:
#box
print 'construct graph'
flow_graph = nx.DiGraph()
ENTRY_NODE = -1
flow_graph.add_node(ENTRY_NODE,demand = -1)
EXIT_NODE = -2
flow_graph.add_node(EXIT_NODE,demand = 1)
# data cost
for index in range(length):
left_node = to_left_node(index)
right_node = to_right_node(index)
flow_graph.add_node(left_node)
flow_graph.add_node(right_node)
data_cost = get_data_cost(scores[index])
flow_graph.add_edge(left_node,right_node,weight=data_cost,capacity = 1)
# smoothness cost
for left,right in reach_graph.edges():
left_node = to_right_node(left)
right_node = to_left_node(right)
smoothness_cost = get_smoothness_cost(sorted_bbox[left],sorted_bbox[right])
flow_graph.add_edge(left_node,right_node,weight=smoothness_cost,capacity = 1)
# entry cost
for index in range(length):
entry_cost = get_entry_cost(index,reach_graph,scores)
left_node = to_left_node(index)
flow_graph.add_edge(ENTRY_NODE,left_node,weight=entry_cost,capacity = 1)
# exit cost
for index in range(length):
exit_cost = get_exit_cost(index,reach_graph,scores)
right_node = to_right_node(index)
flow_graph.add_edge(right_node,EXIT_NODE,weight=exit_cost,capacity = 1)
box_inds=[]
flowDict = nx.min_cost_flow(flow_graph)
flowCost = nx.min_cost_flow_cost(flow_graph)
for index in range(length):
left_node=to_left_node(index)
right_node=to_right_node(index)
try:
find = [node for node, value in flowDict[left_node].iteritems() if value == 1]
except:
find = []
if len(find)>0:
box_inds.append(index)
# find node overlaps over 0.5
remove_inds = box_inds
'''
for index in box_inds:
print index
node_neighbor_right = [right for left, right in reach_graph.edges() if left == index]
node_neighbor_left = [left for left, right in reach_graph.edges() if right == index]
for node_index in node_neighbor_right:
if overlaps(sorted_bbox[node_index],sorted_bbox[index]) > 0.5:
remove_inds.append(node_index)
for node_index in node_neighbor_left:
if overlaps(sorted_bbox[node_index],sorted_bbox[index]) > 0.5:
remove_inds.append(node_index)
'''
# remove node for next iteration
for index in remove_inds:
left_node = to_right_node(index)
right_node = to_left_node(index)
if left_node > 0:
flow_graph.remove_node(left_node)
if right_node > 0:
flow_graph.remove_node(right_node)
return box_inds,flowCost,flow_graph
total += int(exits) - int(entries)
for n in G.nodes():
if "demand" not in G.node[n]:
G.remove_node(n)
turnstile_stations = [record.strip().split(',')[2] for record in noondata]
gtfs_stations = G.nodes()
#print set(turnstile_stations) - set(gtfs_stations)
extra_nodes = set(gtfs_stations) - set(turnstile_stations)
nx.draw_spring(G, with_labels=True, node_color='w', node_size=350, font_size=7)
#plt.show()
flow = nx.min_cost_flow(G)
inflowstation=[]
inflow=[]
for x in G.nodes():
total = 0
inflowstation.append(x)
for p in G.predecessors(x):
total = total+ flow[p][x]
inflow.append(total)
rows = zip(inflowstation,inflow)
length= range(0,len(inflowstation))
y = [ func(xx) for xx in x ]
plt.figure()
plt.plot(x,y)
plt.show()
def FLOWCOST( flow, cost ) :
res = [ cc( flow.get( e, 0. ) ) for e, cc in cost.iteritems() ] # big difference!
#res = [ cost.get( e, line(0.) )( flow[e] ) for e in flow ]
return sum( res )
def FEAS( flow, capacity, network ) :
for e in network.edges() :
if flow.get(e, 0. ) > capacity.get(e, np.Inf ) : return False
return True
flow = MinConvexCostFlow( g, u, supply, cf, epsilon=.001 )
print ( flow, FLOWCOST( flow, cf ), FEAS( flow, u, g ) )
flowstar = { 'b' : 10., 'd' : 10. }
print ( flowstar, FLOWCOST( flowstar, cf ), FEAS( flowstar, u, g ) )
digraph = mincostflow_nx( g, u, supply, c )
compare = nx.min_cost_flow( digraph )
# Let's now solve for the min-cost flow of the example we had in class. We have already added capacities and demands to our network. We finally need to introduce edge costs (weights). # In[10]: G.edge['s']['u']['weight'] = 1 G.edge['s']['v']['weight'] = 1 G.edge['u']['v']['weight'] = 1 G.edge['u']['t']['weight'] = 1 G.edge['v']['t']['weight'] = 2 # Now we can just call the min-cost flow function. Note that we could have used this to solve the flow-with-demands problem, just by setting all the costs (weights) to 0. # In[11]: minimum_cost_flow = nx.min_cost_flow(G) print_flow(minimum_cost_flow) # This is the same as the maximum flow found in class. For this example, the maximum flow is unique. # ## Exercises # # 1. Construct the bipartite graph from the example application in the slides and find a matching using max flow. # # 2. Write a function to compute a conformal decomposition of a flow with demands, and run it on the flows found in the "Min-Cost Flow" section above. # ### Solution 1 # # For the first problem, we form the network by hand then solve max flow using new source and sink vertices, imposing a capacity of 1 on all edges.
