def gen_anat_segs(anat_loc, out_aff):
# # Custom inputs# #
try:
FSLDIR = os.environ['FSLDIR']
except KeyError:
print('FSLDIR environment variable not set!')
import nipype.interfaces.fsl as fsl
#import nibabel as nib
#from nilearn.image import resample_img
from nipype.interfaces.fsl import ExtractROI
print(
'\nSegmenting anatomical image to create White Matter and Ventricular CSF masks for contraining the tractography...'
)
# Create MNI ventricle mask
print('Creating MNI space ventricle mask...')
anat_dir = os.path.dirname(anat_loc)
lvent_out_file = "%s%s" % (anat_dir, '/LVentricle.nii.gz')
rvent_out_file = "%s%s" % (anat_dir, '/RVentricle.nii.gz')
MNI_atlas = "%s%s" % (
FSLDIR,
'/data/atlases/HarvardOxford/HarvardOxford-sub-prob-1mm.nii.gz')
fslroi1 = ExtractROI(in_file=MNI_atlas,
roi_file=lvent_out_file,
t_min=2,
t_size=1)
os.system(fslroi1.cmdline)
fslroi2 = ExtractROI(in_file=MNI_atlas,
roi_file=rvent_out_file,
t_min=13,
t_size=1)
os.system(fslroi2.cmdline)
mni_csf_loc = anat_dir + '/VentricleMask.nii.gz'
args = "%s%s%s" % ('-add ', rvent_out_file, ' -thr 0.1 -bin -dilF')
maths = fsl.ImageMaths(in_file=lvent_out_file,
op_string=args,
out_file=mni_csf_loc)
os.system(maths.cmdline)
# Segment anatomical (should be in MNI space)
print('Segmenting anatomical image using FAST...')
fastr = fsl.FAST()
fastr.inputs.in_files = anat_loc
fastr.inputs.img_type = 1
fastr.run()
old_file_csf = "%s%s" % (anat_loc.split('.nii.gz')[0], '_pve_0.nii.gz')
new_file_csf = "%s%s" % (anat_dir, '/CSF.nii.gz')
old_file_wm = "%s%s" % (anat_loc.split('.nii.gz')[0], '_pve_2.nii.gz')
new_file_wm = "%s%s" % (anat_dir, '/WM.nii.gz')
os.rename(old_file_csf, new_file_csf)
os.rename(old_file_wm, new_file_wm)
# Reslice to 1x1x1mm voxels
#img=nib.load(anat_loc)
#vox_sz = img.affine[0][0]
#targ_aff = img.affine/(np.array([[int(abs(vox_sz)),1,1,1],[1,int(abs(vox_sz)),1,1],[1,1,int(abs(vox_sz)),1],[1,1,1,1]]))
#new_file_csf_res = resample_img(new_file_csf, target_affine=targ_aff)
#new_file_wm_res = resample_img(new_file_wm, target_affine=targ_aff)
#nib.save(new_file_csf_res, new_file_csf)
#nib.save(new_file_wm_res, new_file_wm)
return new_file_csf, mni_csf_loc, new_file_wm
def fslmath_ExtractROI_T(input_file, tmin, tsize, out_prefix):
from nipype.interfaces.fsl import ExtractROI
import os
splitM = ExtractROI()
splitM.inputs.in_file = input_file
splitM.inputs.t_min = tmin
splitM.inputs.t_size = tsize
splitM.inputs.output_type = 'NIFTI_GZ'
print "ExtractROI [" + os.path.basename(input_file) + "]:" + splitM.cmdline
res = splitM.run()
outfile = d2s.move_to_results(res.outputs.roi_file, out_prefix)
return outfile
def gen_anat_segs(anat_loc, FSLDIR):
import nipype.interfaces.fsl as fsl
from nipype.interfaces.fsl import ExtractROI
##Create MNI ventricle mask
print('Creating MNI space ventricle mask...')
anat_dir = os.path.dirname(anat_loc)
lvent_out_file = anat_dir + '/LVentricle.nii.gz'
rvent_out_file = anat_dir + '/RVentricle.nii.gz'
MNI_atlas = FSLDIR + '/data/atlases/HarvardOxford/HarvardOxford-sub-prob-1mm.nii.gz'
fslroi1 = ExtractROI(in_file=MNI_atlas,
roi_file=lvent_out_file,
t_min=2,
t_size=1)
os.system(fslroi1.cmdline)
fslroi2 = ExtractROI(in_file=MNI_atlas,
roi_file=rvent_out_file,
t_min=13,
t_size=1)
os.system(fslroi2.cmdline)
mni_csf_loc = anat_dir + '/VentricleMask.nii.gz'
args = '-add ' + rvent_out_file + ' -thr 0.1 -bin -dilF'
maths = fsl.ImageMaths(in_file=lvent_out_file,
op_string=args,
out_file=mni_csf_loc)
os.system(maths.cmdline)
##Segment anatomical (should be in MNI space)
print('Segmenting anatomical image using FAST...')
fastr = fsl.FAST()
fastr.inputs.in_files = anat_loc
fastr.inputs.img_type = 1
fastr.run()
old_file_csf = anat_loc.split('.nii.gz')[0] + '_pve_0.nii.gz'
new_file_csf = anat_dir + '/CSF.nii.gz'
os.rename(old_file_csf, new_file_csf)
old_file_wm = anat_loc.split('.nii.gz')[0] + '_pve_2.nii.gz'
new_file_wm = anat_dir + '/WM.nii.gz'
os.rename(old_file_wm, new_file_wm)
return (new_file_csf, new_file_wm, mni_csf_loc)
def define_workflow(subject_list, run_list, experiment_dir, output_dir):
"""run the smooth workflow given subject and runs"""
# ExtractROI - skip dummy scans
extract = Node(ExtractROI(t_min=4, t_size=-1, output_type='NIFTI'),
name="extract")
# Smooth - image smoothing
smooth = Node(Smooth(fwhm=[8, 8, 8]), name="smooth")
# Mask - applying mask to smoothed
# mask_func = Node(ApplyMask(output_type='NIFTI'),
# name="mask_func")
# Infosource - a function free node to iterate over the list of subject names
infosource = Node(IdentityInterface(fields=['subject_id', 'run_num']),
name="infosource")
infosource.iterables = [('subject_id', subject_list),
('run_num', run_list)]
# SelectFiles - to grab the data (alternativ to DataGrabber)
func_file = opj(
'sub-{subject_id}', 'func',
'sub-{subject_id}_task-tsl_run-{run_num}_space-MNI152NLin2009cAsym_desc-preproc_bold.nii.gz'
)
templates = {'func': func_file}
selectfiles = Node(SelectFiles(templates, base_directory=data_dir),
name="selectfiles")
# Datasink - creates output folder for important outputs
datasink = Node(DataSink(base_directory=experiment_dir,
container=output_dir),
name="datasink")
## Use the following DataSink output substitutions
substitutions = [('_subject_id_', 'sub-'), ('ssub', 'sub'),
('_space-MNI152NLin2009cAsym_desc-preproc_', '_fwhm-8_'),
('_fwhm_', ''), ('_roi', '')]
substitutions += [('_run_num_%s' % r, '') for r in run_list]
datasink.inputs.substitutions = substitutions
# Create a preprocessing workflow
preproc = Workflow(name='preproc')
preproc.base_dir = opj(experiment_dir, working_dir)
# Connect all components of the preprocessing workflow (spm smooth)
preproc.connect([(infosource, selectfiles, [('subject_id', 'subject_id'),
('run_num', 'run_num')]),
(selectfiles, extract, [('func', 'in_file')]),
(extract, smooth, [('roi_file', 'in_files')]),
(smooth, datasink, [('smoothed_files', 'preproc.@smooth')
])])
return preproc
def Extract_vol_pipeline(self, **kwargs):
pipeline = self.new_pipeline(
name='Extract_volume',
desc=('Extract the last volume of the 4D PET timeseries'),
citations=[],
**kwargs)
pipeline.add('fslroi',
ExtractROI(roi_file='vol.nii.gz', t_min=79, t_size=1),
inputs={'in_file': ('pet_volumes', nifti_gz_format)},
outputs={'pet_image': ('roi_file', nifti_gz_format)})
return pipeline
def Extract_vol_pipeline(self, **kwargs):
pipeline = self.create_pipeline(
name='Extract_volume',
inputs=[DatasetSpec('pet_volumes', nifti_gz_format)],
outputs=[DatasetSpec('pet_image', nifti_gz_format)],
desc=('Extract the last volume of the 4D PET timeseries'),
version=1,
citations=[],
**kwargs)
fslroi = pipeline.create_node(
ExtractROI(roi_file='vol.nii.gz', t_min=79, t_size=1),
name='fslroi')
pipeline.connect_input('pet_volumes', fslroi, 'in_file')
pipeline.connect_output('pet_image', fslroi, 'roi_file')
return pipeline
DWIDenoise,
Generate5tt,
MRDeGibbs,
ResponseSD,
)
#: A dictionary that should be imported in the project's settings and included
#: within the *ANALYSIS_INTERFACES* setting.
interfaces = {
"apply_topup": {ApplyTOPUP().version: ApplyTOPUP},
"binary_maths": {BinaryMaths().version: BinaryMaths},
"BET": {BET().version: BET},
"CAT12 Segmentation": {"12.7": Cat12Segmentation},
"fslmerge": {Merge().version: Merge},
"fslreorient2std": {Reorient2Std().version: Reorient2Std},
"fslroi": {ExtractROI().version: ExtractROI},
"FAST": {FastWrapper.version: FastWrapper},
"FLIRT": {FLIRT().version: FLIRT},
"FNIRT": {FNIRT().version: FNIRT},
"FSL Anatomical Processing Script": {FslAnat.__version__: FslAnat},
"mean_image": {MeanImage().version: MeanImage},
"robustfov": {RobustFOV().version: RobustFOV},
"ReconAll": {ReconAll().version: ReconAll},
"SUSAN": {SUSAN().version: SUSAN},
"topup": {TopupWrapper.version: TopupWrapper},
"eddy": {Eddy().version: Eddy},
"denoise": {DWIDenoise().version: DWIDenoise},
"degibbs": {MRDeGibbs().version: MRDeGibbs},
"bias_correct": {DWIBiasCorrect().version: DWIBiasCorrect},
"dwifslpreproc": {DwiFslPreproc.__version__: DwiFslPreproc},
"mrconvert": {MRConvert.__version__: MRConvert},
def preproc_workflow(input_dir,
output_dir,
subject_list,
ses_list,
anat_file,
func_file,
scan_size=477,
bet_frac=0.37):
"""
The preprocessing workflow used in the preparation of the psilocybin vs escitalopram rsFMRI scans.
Workflows and notes are defined throughout. Inputs are designed to be general and masks/default MNI space is provided
:param input_dir: The input file directory containing all scans in BIDS format
:param output_dir: The output file directory
:param subject_list: a list of subject numbers
:param ses_list: a list of scan numbers (session numbers)
:param anat_file: The format of the anatomical scan within the input directory
:param func_file: The format of the functional scan within the input directory
:param scan_size: The length of the scan by number of images, most 10 minutes scans are around 400-500 depending
upon scanner defaults and parameters - confirm by looking at your data
:param bet_frac: brain extraction fractional intensity threshold
:return: the preprocessing workflow
"""
preproc = Workflow(name='preproc')
preproc.base_dir = output_dir
# Infosource - a function free node to iterate over the list of subject names
infosource = Node(IdentityInterface(fields=['subject_id', 'ses']),
name="infosource")
infosource.iterables = [('subject_id', subject_list), ('ses', ses_list)]
# SelectFiles - to grab the data (alternative to DataGrabber)
templates = {
'anat': anat_file,
'func': func_file
} # define the template of each file input
selectfiles = Node(SelectFiles(templates, base_directory=input_dir),
name="selectfiles")
# Datasink - creates output folder for important outputs
datasink = Node(DataSink(base_directory=output_dir, container=output_dir),
name="datasink")
preproc.connect([(infosource, selectfiles, [('subject_id', 'subject_id'),
('ses', 'ses')])])
'''
This is your functional processing workflow, used to trim scans, despike the signal, slice-time correct,
and motion correct your data
'''
fproc = Workflow(name='fproc') # the functional processing workflow
# ExtractROI - skip dummy scans at the beginning of the recording by removing the first three
trim = Node(ExtractROI(t_min=3, t_size=scan_size, output_type='NIFTI_GZ'),
name="trim")
# 3dDespike - despike
despike = Node(Despike(outputtype='NIFTI_GZ', args='-NEW'), name="despike")
fproc.connect([(trim, despike, [('roi_file', 'in_file')])])
preproc.connect([(selectfiles, fproc, [('func', 'trim.in_file')])])
# 3dTshift - slice time correction
slicetime = Node(TShift(outputtype='NIFTI_GZ', tpattern='alt+z2'),
name="slicetime")
fproc.connect([(despike, slicetime, [('out_file', 'in_file')])])
# 3dVolreg - correct motion and output 1d matrix
moco = Node(Volreg(outputtype='NIFTI_GZ',
interp='Fourier',
zpad=4,
args='-twopass'),
name="moco")
fproc.connect([(slicetime, moco, [('out_file', 'in_file')])])
moco_bpfdt = Node(
MOCObpfdt(), name='moco_bpfdt'
) # use the matlab function to correct the motion regressor
fproc.connect([(moco, moco_bpfdt, [('oned_file', 'in_file')])])
'''
This is the co-registration workflow using FSL and ANTs
'''
coreg = Workflow(name='coreg')
# BET - structural data brain extraction
bet_anat = Node(BET(output_type='NIFTI_GZ', frac=bet_frac, robust=True),
name="bet_anat")
# FSL segmentation process to get WM map
seg = Node(FAST(bias_iters=6,
img_type=1,
output_biascorrected=True,
output_type='NIFTI_GZ'),
name="seg")
coreg.connect([(bet_anat, seg, [('out_file', 'in_files')])])
# functional to structural registration
mean = Node(MCFLIRT(mean_vol=True, output_type='NIFTI_GZ'), name="mean")
# BBR using linear methods for initial transform fit
func2struc = Node(FLIRT(cost='bbr', dof=6, output_type='NIFTI_GZ'),
name='func2struc')
coreg.connect([(seg, func2struc, [('restored_image', 'reference')])])
coreg.connect([(mean, func2struc, [('mean_img', 'in_file')])])
coreg.connect([(seg, func2struc, [(('tissue_class_files', pickindex, 2),
'wm_seg')])])
# convert the FSL linear transform into a C3d format for AFNI
f2s_c3d = Node(C3dAffineTool(itk_transform=True, fsl2ras=True),
name='f2s_c3d')
coreg.connect([(func2struc, f2s_c3d, [('out_matrix_file', 'transform_file')
])])
coreg.connect([(mean, f2s_c3d, [('mean_img', 'source_file')])])
coreg.connect([(seg, f2s_c3d, [('restored_image', 'reference_file')])])
# Functional to structural registration via ANTs non-linear registration
reg = Node(Registration(
fixed_image='default_images/MNI152_T1_2mm_brain.nii.gz',
transforms=['Affine', 'SyN'],
transform_parameters=[(0.1, ), (0.1, 3.0, 0.0)],
number_of_iterations=[[1500, 1000, 1000], [100, 70, 50, 20]],
dimension=3,
write_composite_transform=True,
collapse_output_transforms=True,
metric=['MI'] + ['CC'],
metric_weight=[1] * 2,
radius_or_number_of_bins=[32] + [4],
convergence_threshold=[1.e-8, 1.e-9],
convergence_window_size=[20] + [10],
smoothing_sigmas=[[2, 1, 0], [4, 2, 1, 0]],
sigma_units=['vox'] * 2,
shrink_factors=[[4, 2, 1], [6, 4, 2, 1]],
use_histogram_matching=[False] + [True],
use_estimate_learning_rate_once=[True, True],
output_warped_image=True),
name='reg')
coreg.connect([(seg, reg, [('restored_image', 'moving_image')])
]) # connect segmentation node to registration node
merge1 = Node(niu.Merge(2), iterfield=['in2'],
name='merge1') # merge the linear and nonlinear transforms
coreg.connect([(f2s_c3d, merge1, [('itk_transform', 'in2')])])
coreg.connect([(reg, merge1, [('composite_transform', 'in1')])])
# warp the functional images into MNI space using the transforms from FLIRT and SYN
warp = Node(ApplyTransforms(
reference_image='default_images/MNI152_T1_2mm_brain.nii.gz',
input_image_type=3),
name='warp')
coreg.connect([(moco, warp, [('out_file', 'input_image')])])
coreg.connect([(merge1, warp, [('out', 'transforms')])])
preproc.connect([(selectfiles, coreg, [('anat', 'bet_anat.in_file')])])
preproc.connect([(fproc, coreg, [('moco.out_file', 'mean.in_file')])])
'''
Scrubbing workflow - find the motion outliers, bandpass filter, re-mean the data after bpf
'''
scrub = Workflow(name='scrub')
# Generate the Scrubbing Regressor
scrub_metrics = Node(MotionOutliers(dummy=4,
out_file='FD_outliers.1D',
metric='fd',
threshold=0.4),
name="scrub_metrics")
# regress out timepoints
scrub_frames = Node(Bandpass(highpass=0,
lowpass=99999,
outputtype='NIFTI_GZ'),
name='scrub_frames')
scrub.connect([(scrub_metrics, scrub_frames, [('out_file',
'orthogonalize_file')])])
preproc.connect([(coreg, scrub, [('warp.output_image',
'scrub_frames.in_file')])])
preproc.connect([(selectfiles, scrub, [('func', 'scrub_metrics.in_file')])
])
# mean image for remeaning after bandpass
premean = Node(TStat(args='-mean', outputtype='NIFTI_GZ'), name='premean')
# remean the image
remean2 = Node(Calc(expr='a+b', outputtype='NIFTI_GZ'), name='remean2')
scrub.connect([(scrub_frames, remean2, [('out_file', 'in_file_a')])])
scrub.connect([(premean, remean2, [('out_file', 'in_file_b')])])
preproc.connect([(coreg, scrub, [('warp.output_image', 'premean.in_file')])
])
'''
Regressors for final cleaning steps
'''
regressors = Workflow(name='regressors')
# Using registered structural image to create the masks for both WM and CSF
regbet = Node(BET(robust=True, frac=0.37, output_type='NIFTI_GZ'),
name='regbet')
regseg = Node(FAST(img_type=1,
output_type='NIFTI_GZ',
no_pve=True,
no_bias=True,
segments=True),
name='regseg')
regressors.connect([(regbet, regseg, [('out_file', 'in_files')])])
preproc.connect([(coreg, regressors, [('reg.warped_image',
'regbet.in_file')])])
'''
Create a cerebrospinal fluid (CSF) regressor
'''
# subtract subcortical GM from the CSF mask
subcortgm = Node(BinaryMaths(
operation='sub',
operand_file='default_images/subcortical_gm_mask_bin.nii.gz',
output_type='NIFTI_GZ',
args='-bin'),
name='subcortgm')
regressors.connect([(regseg, subcortgm, [(('tissue_class_files', pickindex,
0), 'in_file')])])
# Fill the mask holes
fillcsf = Node(MaskTool(fill_holes=True, outputtype='NIFTI_GZ'),
name='fillcsf')
regressors.connect([(subcortgm, fillcsf, [('out_file', 'in_file')])])
# Erode the mask
erocsf = Node(MaskTool(outputtype='NIFTI_GZ', dilate_inputs='-1'),
name='erocsf')
regressors.connect([(fillcsf, erocsf, [('out_file', 'in_file')])])
# Take mean csf signal from functional image
meancsf = Node(ImageMeants(output_type='NIFTI_GZ'), name='meancsf')
regressors.connect([(erocsf, meancsf, [('out_file', 'mask')])])
preproc.connect([(coreg, regressors, [('warp.output_image',
'meancsf.in_file')])])
bpf_dt_csf = Node(CSFbpfdt(), name='bpf_dt_csf')
regressors.connect([(meancsf, bpf_dt_csf, [('out_file', 'in_file')])])
'''
Creates a local white matter regressor
'''
# subtract subcortical gm
subcortgm2 = Node(BinaryMaths(
operation='sub',
operand_file='default_images/subcortical_gm_mask_bin.nii.gz',
output_type='NIFTI_GZ',
args='-bin'),
name='subcortgm2')
regressors.connect([(regseg, subcortgm2, [(('tissue_class_files',
pickindex, 2), 'in_file')])])
# fill mask
fillwm = Node(MaskTool(fill_holes=True, outputtype='NIFTI_GZ'),
name='fillwm')
regressors.connect([(subcortgm2, fillwm, [('out_file', 'in_file')])])
# erod mask
erowm = Node(MaskTool(outputtype='NIFTI_GZ', dilate_inputs='-1'),
name='erowm')
regressors.connect([(fillwm, erowm, [('out_file', 'in_file')])])
# generate local wm
localwm = Node(Localstat(neighborhood=('SPHERE', 25),
stat='mean',
nonmask=True,
outputtype='NIFTI_GZ'),
name='localwm')
regressors.connect([(erowm, localwm, [('out_file', 'mask_file')])])
preproc.connect([(coreg, regressors, [('warp.output_image',
'localwm.in_file')])])
# bandpass filter the local wm regressor
localwm_bpf = Node(Fourier(highpass=0.01,
lowpass=0.08,
args='-retrend',
outputtype='NIFTI_GZ'),
name='loacwm_bpf')
regressors.connect([(localwm, localwm_bpf, [('out_file', 'in_file')])])
# detrend the local wm regressor
localwm_bpf_dt = Node(Detrend(args='-polort 2', outputtype='NIFTI_GZ'),
name='localwm_bpf_dt')
regressors.connect([(localwm_bpf, localwm_bpf_dt, [('out_file', 'in_file')
])])
'''
Clean up your functional image with the regressors you have created above
'''
# create a mask for blurring filtering, and detrending
clean = Workflow(name='clean')
mask = Node(BET(mask=True, functional=True), name='mask')
mean_mask = Node(MCFLIRT(mean_vol=True, output_type='NIFTI_GZ'),
name="mean_mask")
dilf = Node(DilateImage(operation='max', output_type='NIFTI_GZ'),
name='dilf')
clean.connect([(mask, dilf, [('mask_file', 'in_file')])])
preproc.connect([(scrub, clean, [('remean2.out_file', 'mask.in_file')])])
fill = Node(MaskTool(in_file='default_images/MNI152_T1_2mm_brain.nii.gz',
fill_holes=True,
outputtype='NIFTI_GZ'),
name='fill')
axb = Node(Calc(expr='a*b', outputtype='NIFTI_GZ'), name='axb')
clean.connect([(dilf, axb, [('out_file', 'in_file_a')])])
clean.connect([(fill, axb, [('out_file', 'in_file_b')])])
bxc = Node(Calc(expr='ispositive(a)*b', outputtype='NIFTI_GZ'), name='bxc')
clean.connect([(mean_mask, bxc, [('mean_img', 'in_file_a')])])
clean.connect([(axb, bxc, [('out_file', 'in_file_b')])])
preproc.connect([(scrub, clean, [('remean2.out_file', 'mean_mask.in_file')
])])
#### BLUR, FOURIER BPF, and DETREND
blurinmask = Node(BlurInMask(fwhm=6, outputtype='NIFTI_GZ'),
name='blurinmask')
clean.connect([(bxc, blurinmask, [('out_file', 'mask')])])
preproc.connect([(scrub, clean, [('remean2.out_file', 'blurinmask.in_file')
])])
fourier = Node(Fourier(highpass=0.01,
lowpass=0.08,
retrend=True,
outputtype='NIFTI_GZ'),
name='fourier')
clean.connect([(blurinmask, fourier, [('out_file', 'in_file')])])
tstat = Node(TStat(args='-mean', outputtype='NIFTI_GZ'), name='tstat')
clean.connect([(fourier, tstat, [('out_file', 'in_file')])])
detrend = Node(Detrend(args='-polort 2', outputtype='NIFTI_GZ'),
name='detrend')
clean.connect([(fourier, detrend, [('out_file', 'in_file')])])
remean = Node(Calc(expr='a+b', outputtype='NIFTI_GZ'), name='remean')
clean.connect([(detrend, remean, [('out_file', 'in_file_a')])])
clean.connect([(tstat, remean, [('out_file', 'in_file_b')])])
concat = Node(ConcatModel(), name='concat')
# Removes nuisance regressors via regression function
clean_rs = Node(Bandpass(highpass=0, lowpass=99999, outputtype='NIFTI_GZ'),
name='clean_rs')
clean.connect([(concat, clean_rs, [('out_file', 'orthogonalize_file')])])
remean1 = Node(Calc(expr='a+b', outputtype='NIFTI_GZ'), name='remean1')
clean.connect([(clean_rs, remean1, [('out_file', 'in_file_a')])])
clean.connect([(tstat, remean1, [('out_file', 'in_file_b')])])
preproc.connect([(regressors, clean, [('bpf_dt_csf.out_file',
'concat.in_file_a')])])
preproc.connect([(fproc, clean, [('moco_bpfdt.out_file',
'concat.in_file_b')])])
preproc.connect([(regressors, clean, [('localwm_bpf_dt.out_file',
'clean_rs.orthogonalize_dset')])])
clean.connect([(remean, clean_rs, [('out_file', 'in_file')])])
'''
Write graphical output detailing the workflows and nodes
'''
fproc.write_graph(graph2use='flat',
format='png',
simple_form=True,
dotfilename='./fproc.dot')
fproc.write_graph(graph2use='colored',
format='png',
simple_form=True,
dotfilename='./fproc_color.dot')
coreg.write_graph(graph2use='flat',
format='png',
simple_form=True,
dotfilename='./coreg.dot')
coreg.write_graph(graph2use='colored',
format='png',
simple_form=True,
dotfilename='./coreg_color.dot')
scrub.write_graph(graph2use='flat',
format='png',
simple_form=True,
dotfilename='./scrub.dot')
scrub.write_graph(graph2use='colored',
format='png',
simple_form=True,
dotfilename='./scrub_color.dot')
regressors.write_graph(graph2use='flat',
format='png',
simple_form=True,
dotfilename='./reg.dot')
regressors.write_graph(graph2use='colored',
format='png',
simple_form=True,
dotfilename='./reg_color.dot')
preproc.write_graph(graph2use='flat',
format='png',
simple_form=True,
dotfilename='./preproc.dot')
preproc.write_graph(graph2use='colored',
format='png',
simple_form=True,
dotfilename='./preproc_color.dot')
return preproc
coregwf.connect([
(bet_anat, segmentation, [('out_file', 'in_files')]),
(segmentation, threshold, [(('partial_volume_files', pif.get_wm),
'in_file')]),
(bet_anat, coreg_pre, [('out_file', 'reference')]),
(MNI, Normalization, [('out_file', 'reference')]),
(threshold, coreg_bbr, [('out_file', 'wm_seg')]),
(coreg_pre, coreg_bbr, [('out_matrix_file', 'in_matrix_file')]),
(coreg_bbr, Normalization, [('out_matrix_file', 'in_matrix_file')]),
(Normalization, applywarp, [('out_matrix_file', 'in_matrix_file')]),
(MNI, applywarp, [('out_file', 'reference')]),
])
#coregwf.write_graph(graph2use='colored', format='svg', simple_form=True)
'''-------------------------Nodos flujo funcional---------------------------'''
'''#########################################################################'''
extract = Node(ExtractROI(t_min=4, t_size=-1, output_type='NIFTI_GZ'),
name="extract")
mcflirt2 = Node(Function(input_names=['in_file', 'dof'],
output_names=['out_file', 'mean_img', 'par_file'],
function=pif.MCflirt2),
name='mcflirt2')
mcflirt2.inputs.dof = 12
#mcflirt2.iterables = ("dof", DOF)
slicetimer = Node(SliceTimer(index_dir=False,
interleaved=True,
output_type='NIFTI',
time_repetition=TR),
name="slicetimer")
def preprocessing(*argu):
argu = argu[0]
json_file = argu[1]
with open(json_file, 'r') as jsonfile:
info = json.load(jsonfile, object_pairs_hook=OrderedDict)
subject_list = info["subject_list"]
experiment_dir = info["experiment_dir"]
output_dir = 'datasink'
working_dir = 'workingdir'
task_list = info["task_list"]
fwhm = [*map(int, info["fwhm"])]
TR = float(info["TR"])
iso_size = 4
slice_list = [*map(int, info["slice order"])]
# ExtractROI - skip dummy scans
extract = Node(ExtractROI(t_min=int(info["dummy scans"]),
t_size=-1,
output_type='NIFTI'),
name="extract")
slicetime = Node(SliceTiming(num_slices=len(slice_list),
ref_slice=int(median(slice_list)),
slice_order=slice_list,
time_repetition=TR,
time_acquisition=TR - (TR / len(slice_list))),
name="slicetime")
mcflirt = Node(MCFLIRT(mean_vol=True, save_plots=True,
output_type='NIFTI'),
name="mcflirt")
# Smooth - image smoothing
smooth = Node(Smooth(), name="smooth")
smooth.iterables = ("fwhm", fwhm)
# Artifact Detection - determines outliers in functional images
art = Node(ArtifactDetect(norm_threshold=2,
zintensity_threshold=3,
mask_type='spm_global',
parameter_source='FSL',
use_differences=[True, False],
plot_type='svg'),
name="art")
# BET - Skullstrip anatomical Image
bet_anat = Node(BET(frac=0.5, robust=True, output_type='NIFTI_GZ'),
name="bet_anat")
# FAST - Image Segmentation
segmentation = Node(FAST(output_type='NIFTI_GZ'),
name="segmentation",
mem_gb=4)
# Select WM segmentation file from segmentation output
def get_wm(files):
return files[-1]
# Threshold - Threshold WM probability image
threshold = Node(Threshold(thresh=0.5, args='-bin',
output_type='NIFTI_GZ'),
name="threshold")
# FLIRT - pre-alignment of functional images to anatomical images
coreg_pre = Node(FLIRT(dof=6, output_type='NIFTI_GZ'), name="coreg_pre")
# FLIRT - coregistration of functional images to anatomical images with BBR
coreg_bbr = Node(FLIRT(dof=6,
cost='bbr',
schedule=opj(os.getenv('FSLDIR'),
'etc/flirtsch/bbr.sch'),
output_type='NIFTI_GZ'),
name="coreg_bbr")
# Apply coregistration warp to functional images
applywarp = Node(FLIRT(interp='spline',
apply_isoxfm=iso_size,
output_type='NIFTI'),
name="applywarp")
# Apply coregistration warp to mean file
applywarp_mean = Node(FLIRT(interp='spline',
apply_isoxfm=iso_size,
output_type='NIFTI_GZ'),
name="applywarp_mean")
# Create a coregistration workflow
coregwf = Workflow(name='coregwf')
coregwf.base_dir = opj(experiment_dir, working_dir)
# Connect all components of the coregistration workflow
coregwf.connect([
(bet_anat, segmentation, [('out_file', 'in_files')]),
(segmentation, threshold, [(('partial_volume_files', get_wm),
'in_file')]),
(bet_anat, coreg_pre, [('out_file', 'reference')]),
(threshold, coreg_bbr, [('out_file', 'wm_seg')]),
(coreg_pre, coreg_bbr, [('out_matrix_file', 'in_matrix_file')]),
(coreg_bbr, applywarp, [('out_matrix_file', 'in_matrix_file')]),
(bet_anat, applywarp, [('out_file', 'reference')]),
(coreg_bbr, applywarp_mean, [('out_matrix_file', 'in_matrix_file')]),
(bet_anat, applywarp_mean, [('out_file', 'reference')]),
])
# Infosource - a function free node to iterate over the list of subject names
infosource = Node(IdentityInterface(fields=['subject_id', 'task_name']),
name="infosource")
infosource.iterables = [('subject_id', subject_list),
('task_name', task_list)]
# SelectFiles - to grab the data (alternativ to DataGrabber)
anat_file = opj('sub-{subject_id}', 'anat', 'sub-{subject_id}_T1w.nii.gz')
func_file = opj('sub-{subject_id}', 'func',
'sub-{subject_id}_task-{task_name}_bold.nii.gz')
templates = {'anat': anat_file, 'func': func_file}
selectfiles = Node(SelectFiles(templates,
base_directory=info["base directory"]),
name="selectfiles")
# Datasink - creates output folder for important outputs
datasink = Node(DataSink(base_directory=experiment_dir,
container=output_dir),
name="datasink")
## Use the following DataSink output substitutions
substitutions = [
('_subject_id_', 'sub-'),
('_task_name_', '/task-'),
('_fwhm_', 'fwhm-'),
('_roi', ''),
('_mcf', ''),
('_st', ''),
('_flirt', ''),
('.nii_mean_reg', '_mean'),
('.nii.par', '.par'),
]
subjFolders = [('fwhm-%s/' % f, 'fwhm-%s_' % f) for f in fwhm]
substitutions.extend(subjFolders)
datasink.inputs.substitutions = substitutions
# Create a preprocessing workflow
preproc = Workflow(name='preproc')
preproc.base_dir = opj(experiment_dir, working_dir)
# Connect all components of the preprocessing workflow
preproc.connect([
(infosource, selectfiles, [('subject_id', 'subject_id'),
('task_name', 'task_name')]),
(selectfiles, extract, [('func', 'in_file')]),
(extract, slicetime, [('roi_file', 'in_files')]),
(slicetime, mcflirt, [('timecorrected_files', 'in_file')]),
(selectfiles, coregwf, [('anat', 'bet_anat.in_file'),
('anat', 'coreg_bbr.reference')]),
(mcflirt, coregwf, [('mean_img', 'coreg_pre.in_file'),
('mean_img', 'coreg_bbr.in_file'),
('mean_img', 'applywarp_mean.in_file')]),
(mcflirt, coregwf, [('out_file', 'applywarp.in_file')]),
(coregwf, smooth, [('applywarp.out_file', 'in_files')]),
(mcflirt, datasink, [('par_file', 'preproc.@par')]),
(smooth, datasink, [('smoothed_files', 'preproc.@smooth')]),
(coregwf, datasink, [('applywarp_mean.out_file', 'preproc.@mean')]),
(coregwf, art, [('applywarp.out_file', 'realigned_files')]),
(mcflirt, art, [('par_file', 'realignment_parameters')]),
(coregwf, datasink, [('coreg_bbr.out_matrix_file',
'preproc.@mat_file'),
('bet_anat.out_file', 'preproc.@brain')]),
(art, datasink, [('outlier_files', 'preproc.@outlier_files'),
('plot_files', 'preproc.@plot_files')]),
])
# Create preproc output graph# Creat # Create
preproc.write_graph(graph2use='colored', format='png', simple_form=True)
# Visualize the graph
img1 = imread(opj(preproc.base_dir, 'preproc', 'graph.png'))
plt.imshow(img1)
plt.xticks([]), plt.yticks([])
plt.show()
# Visualize the detailed graph# Visua # Visual
preproc.write_graph(graph2use='flat', format='png', simple_form=True)
img2 = imread(opj(preproc.base_dir, 'preproc', 'graph_detailed.png'))
plt.imshow(img2)
plt.xticks([]), plt.yticks([])
plt.show()
print("Workflow all set. Check the workflow image :)")
response = input('Should run the workflow? Enter yes or no :')
if response == 'yes':
preproc.run('MultiProc', plugin_args={'n_procs': 10})
elif response == 'no':
print('Exits the program since you entered no')
else:
raise RuntimeError('Should enter either yes or no')
working_dir = 'workingdir'
subject_list = ['sub-1', 'sub-2', 'sub-3', 'sub-4', 'sub-5', 'sub-6']
fwhm = [4, 8]
# full width at half maximum
#filter width in space
task_list = ['objectviewing']
with open('ds000105/task-objectviewing_bold.json', 'rt') as fp:
task_info = json.load(fp)
TR = task_info['RepetitionTime']
iso_size = 4
# ExtractROI - skip dummy scans
extract = Node(ExtractROI(t_min=4, t_size=-1),
output_type='NIFTI',
name="extract")
# MCFLIRT - motion correction
mcflirt = Node(MCFLIRT(mean_vol=True, save_plots=True, output_type='NIFTI'),
name="mcflirt")
#SliceTimer - correct for slice wise acquisition
slicetimer = Node(SliceTimer(index_dir=False,
interleaved=True,
output_type='NIFTI',
time_repetition=TR),
name="slicetimer")
# Smooth - image smoothing
structural_dir = '/home/colciencias/base/struct/'
experiment_dir = opj(base_dir, 'output/')
output_dir = 'datasink'
working_dir = 'workingdir'
subject_list = ['1']
# list of subject identifiers
fwhm = 8 # Smoothing widths to apply (Gaussian kernel size)
TR = 2 # Repetition time
init_volume = 0 # Firts volumen identification which will use in the pipeline
iso_size = 2 # Isometric resample of functional images to voxel size (in mm)
# ExtractROI - skip dummy scans
extract = Node(ExtractROI(t_min=init_volume, t_size=-1, output_type='NIFTI'),
name="extract")
# MCFLIRT - motion correction
mcflirt = Node(MCFLIRT(mean_vol=True, save_plots=True, output_type='NIFTI'),
name="motion_correction")
# SliceTimer - correct for slice wise acquisition
slicetimer = Node(SliceTimer(index_dir=False,
interleaved=True,
output_type='NIFTI',
time_repetition=TR),
name="slice_timing_correction")
# Smooth - image smoothing
smooth = Node(spm.Smooth(fwhm=fwhm), name="smooth")
def _main(subject_list,vols,subid_vol_dict, number_of_skipped_volumes,brain_path,\
mask_path,\
atlas_path,\
tr_path,\
motion_params_path,\
func2std_mat_path,\
MNI3mm_path,\
base_directory,\
fc_datasink_name,\
motion_param_regression,\
band_pass_filtering,\
global_signal_regression,\
smoothing,\
volcorrect,\
num_proc,\
functional_connectivity_directory ):
# ## Volume correction
# * I have already extracted 4 volumes.
# * Now extract 120 - 4 = 116 volumes from each subject
# * So define vols = 114
#
if number_of_skipped_volumes == None:
number_of_skipped_volumes = 4
vols = vols - number_of_skipped_volumes
def vol_correct(sub_id, subid_vol_dict, vols, number_of_skipped_volumes):
sub_vols = subid_vol_dict[sub_id] - number_of_skipped_volumes
if sub_vols > vols:
t_min = sub_vols - vols
elif sub_vols == vols:
t_min = 0
else:
raise Exception('Volumes of Sub ',sub_id,' less than desired!')
return int(t_min)
# In[491]:
volCorrect = Node(Function(function=vol_correct, input_names=['sub_id','subid_vol_dict','vols','number_of_skipped_volumes'],
output_names=['t_min']), name='volCorrect')
volCorrect.inputs.subid_vol_dict = subid_vol_dict
volCorrect.inputs.vols = vols
volCorrect.inputs.number_of_skipped_volumes = number_of_skipped_volumes
# ## Define a function to fetch the filenames of a particular subject ID
def get_subject_filenames(subject_id,brain_path,mask_path,atlas_path,tr_path,motion_params_path,func2std_mat_path,MNI3mm_path):
import re
from itertools import zip_longest
for brain,mask,atlas,tr,motion_param,func2std_mat in zip_longest(brain_path,mask_path,atlas_path,tr_path,motion_params_path,func2std_mat_path): #itertools helps to zip unequal save_file_list_in_mask
# Source : https://stackoverflow.com/questions/11318977/zipping-unequal-lists-in-python-in-to-a-list-which-does-not-drop-any-element-fro
print('*******************',brain,mask,atlas,tr,motion_param,func2std_mat)
sub_id_extracted = re.search('.+_subject_id_(\d+)', brain).group(1)
if str(subject_id) in brain:
# print("Files for subject ",subject_id,brain,mask,atlas,tr,motion_param)
return brain,mask,atlas,tr,motion_param,func2std_mat,MNI3mm_path
print ('Unable to locate Subject: ',subject_id,'extracted: ',sub_id_extracted)
# print ('Unable to locate Subject: ',subject_id)
raise Exception('Unable to locate Subject: ',subject_id,'extracted: ',sub_id_extracted)
# raise Exception('Unable to locate Subject: ',subject_id)
return 0
# Make a node
getSubjectFilenames = Node(Function(function=get_subject_filenames, input_names=['subject_id','brain_path','mask_path','atlas_path','tr_path','motion_params_path','func2std_mat_path','MNI3mm_path'],
output_names=['brain','mask','atlas','tr','motion_param','func2std_mat', 'MNI3mm_path']), name='getSubjectFilenames')
getSubjectFilenames.inputs.brain_path = brain_path
getSubjectFilenames.inputs.mask_path = mask_path
getSubjectFilenames.inputs.atlas_path = atlas_path
getSubjectFilenames.inputs.tr_path = tr_path
getSubjectFilenames.inputs.motion_params_path = motion_params_path
getSubjectFilenames.inputs.func2std_mat_path = func2std_mat_path
getSubjectFilenames.inputs.MNI3mm_path = MNI3mm_path
infosource = Node(IdentityInterface(fields=['subject_id']),
name="infosource")
infosource.iterables = [('subject_id',subject_list)]
# ## Band Pass Filtering
# Let's do a band pass filtering on the data using the
# code from https://neurostars.org/t/bandpass-filtering-different-outputs-from-fsl-and-nipype-custom-function/824/2
### AFNI
bandpass = Node(afni.Bandpass(highpass=0.01, lowpass=0.1,
despike=False, no_detrend=True, notrans=True,
outputtype='NIFTI_GZ'),name='bandpass')
# bandpass = Node(afni.Bandpass(highpass=0.001, lowpass=0.01,
# despike=False, no_detrend=True, notrans=True,
# tr=2.0,outputtype='NIFTI_GZ'),name='bandpass')
# ## Highpass filtering
# In[506]:
"""
Perform temporal highpass filtering on the data
"""
# https://afni.nimh.nih.gov/pub/dist/doc/program_help/3dBandpass.html
# os.chdir('/home1/varunk/Autism-Connectome-Analysis-bids-related/')
highpass = Node(afni.Bandpass(highpass=0.009, lowpass=99999,
despike=False, no_detrend=True, notrans=True,
outputtype='NIFTI_GZ'),name='highpass')
# FSL bandpass/Highpass
# highpass = Node(interface=ImageMaths(suffix='_tempfilt'),
# iterfield=['in_file'],
# name='highpass')
#
# highpass.inputs.op_string = '-bptf 27.77775001525879 -1' # 23.64 # 31.25
# ## Smoothing
# ### Using 6mm fwhm
# sigma = 6/2.3548 = 2.547987090198743
spatialSmooth = Node(interface=ImageMaths(op_string='-s 2.5479',
suffix='_smoothed'),
name='spatialSmooth')
# ## Performs Gram Schmidt Process
# https://en.wikipedia.org/wiki/Gram%E2%80%93Schmidt_process
# In[509]:
def orthogonalize(in_file, mask_file):
import numpy as np
import nibabel as nib
import os
from os.path import join as opj
def gram_schmidt(voxel_time_series, mean_vector):
numerator = np.dot(voxel_time_series,mean_vector)
dinominator = np.dot(mean_vector,mean_vector)
voxel_time_series_orthogonalized = voxel_time_series - (numerator/dinominator)*mean_vector
# TO CONFIRM IF THE VECTORS ARE ORTHOGONAL
# sum_dot_prod = np.sum(np.dot(voxel_time_series_orthogonalized,mean_vector))
# print('Sum of entries of orthogonalized vector = ',sum_dot_prod)
return voxel_time_series_orthogonalized
mask_data = nib.load(mask_file)
mask = mask_data.get_data()
brain_data = nib.load(in_file)
brain = brain_data.get_data()
x_dim, y_dim, z_dim, t_dim = brain_data.shape
# Find mean brain
mean_vector = np.zeros(t_dim)
num_brain_voxels = 0
# Count the number of brain voxels
for i in range(x_dim):
for j in range(y_dim):
for k in range(z_dim):
if mask[i,j,k] == 1:
mean_vector = mean_vector + brain[i,j,k,:]
num_brain_voxels = num_brain_voxels + 1
mean_vector = mean_vector / num_brain_voxels
# Orthogonalize
for i in range(x_dim):
for j in range(y_dim):
for k in range(z_dim):
if mask[i,j,k] == 1:
brain[i,j,k,:] = gram_schmidt(brain[i,j,k,:], mean_vector)
sub_id = in_file.split('/')[-1].split('.')[0].split('_')[0].split('-')[1]
gsr_file_name = 'sub-' + sub_id + '_task-rest_run-1_bold.nii.gz'
# gsr_file_name_nii = gsr_file_name + '.nii.gz'
out_file = opj(os.getcwd(),gsr_file_name) # path
brain_with_header = nib.Nifti1Image(brain, affine=brain_data.affine,header = brain_data.header)
nib.save(brain_with_header,gsr_file_name)
return out_file
# In[510]:
globalSignalRemoval = Node(Function(function=orthogonalize, input_names=['in_file','mask_file'],
output_names=['out_file']), name='globalSignalRemoval' )
# globalSignalRemoval.inputs.mask_file = mask_file
# globalSignalRemoval.iterables = [('in_file',file_paths)]
# ## GLM for regression of motion parameters
# In[511]:
def calc_residuals(in_file,
motion_file):
"""
Calculates residuals of nuisance regressors -motion parameters for every voxel for a subject using GLM.
Parameters
----------
in_file : string
Path of a subject's motion corrected nifti file.
motion_par_file : string
path of a subject's motion parameters
Returns
-------
out_file : string
Path of residual file in nifti format
"""
import nibabel as nb
import numpy as np
import os
from os.path import join as opj
nii = nb.load(in_file)
data = nii.get_data().astype(np.float32)
global_mask = (data != 0).sum(-1) != 0
# Check and define regressors which are provided from files
if motion_file is not None:
motion = np.genfromtxt(motion_file)
if motion.shape[0] != data.shape[3]:
raise ValueError('Motion parameters {0} do not match data '
'timepoints {1}'.format(motion.shape[0],
data.shape[3]))
if motion.size == 0:
raise ValueError('Motion signal file {0} is '
'empty'.format(motion_file))
# Calculate regressors
regressor_map = {'constant' : np.ones((data.shape[3],1))}
regressor_map['motion'] = motion
X = np.zeros((data.shape[3], 1))
for rname, rval in regressor_map.items():
X = np.hstack((X, rval.reshape(rval.shape[0],-1)))
X = X[:,1:]
if np.isnan(X).any() or np.isnan(X).any():
raise ValueError('Regressor file contains NaN')
Y = data[global_mask].T
try:
B = np.linalg.inv(X.T.dot(X)).dot(X.T).dot(Y)
except np.linalg.LinAlgError as e:
if "Singular matrix" in e:
raise Exception("Error details: {0}\n\nSingular matrix error: "
"The nuisance regression configuration you "
"selected may have been too stringent, and the "
"regression could not be completed. Ensure your "
"parameters are not too "
"extreme.\n\n".format(e))
else:
raise Exception("Error details: {0}\n\nSomething went wrong with "
"nuisance regression.\n\n".format(e))
Y_res = Y - X.dot(B)
data[global_mask] = Y_res.T
img = nb.Nifti1Image(data, header=nii.get_header(),
affine=nii.get_affine())
subject_name = in_file.split('/')[-1].split('.')[0]
filename = subject_name + '_residual.nii.gz'
out_file = os.path.join(os.getcwd(),filename )
img.to_filename(out_file) # alt to nib.save
return out_file
# In[512]:
# Create a Node for above
calc_residuals = Node(Function(function=calc_residuals, input_names=['in_file','motion_file'],
output_names=['out_file']), name='calc_residuals')
# ## Datasink
# I needed to define the structure of what files are saved and where.
# In[513]:
# Create DataSink object
dataSink = Node(DataSink(), name='datasink')
# Name of the output folder
dataSink.inputs.base_directory = opj(base_directory,fc_datasink_name)
# To create the substitutions I looked the `datasink` folder where I was redirecting the output. I manually selected the part of file/folder name that I wanted to change and copied below to be substituted.
#
# In[514]:
# Define substitution strings so that the data is similar to BIDS
substitutions = [('_subject_id_', 'sub-')]
# Feed the substitution strings to the DataSink node
dataSink.inputs.substitutions = substitutions
# ### Following is a Join Node that collects the preprocessed file paths and saves them in a file
# In[516]:
def save_file_list_function(in_fc_map_brain_file):
# Imports
import numpy as np
import os
from os.path import join as opj
file_list = np.asarray(in_fc_map_brain_file)
print('######################## File List ######################: \n',file_list)
np.save('fc_map_brain_file_list',file_list)
file_name = 'fc_map_brain_file_list.npy'
out_fc_map_brain_file = opj(os.getcwd(),file_name) # path
return out_fc_map_brain_file
# In[517]:
save_file_list = JoinNode(Function(function=save_file_list_function, input_names=['in_fc_map_brain_file'],
output_names=['out_fc_map_brain_file']),
joinsource="infosource",
joinfield=['in_fc_map_brain_file'],
name="save_file_list")
# ## Create a FC node
#
# This node:
# 1. Exracts the average time series of the brain ROI's using the atlas and stores
# it as a matrix of size [ROIs x Volumes].
# 2. Extracts the Voxel time series and stores it in matrix of size [Voxels x Volumes]
#
# And save FC matrix files in shape of brains
def pear_coff(in_file, atlas_file, mask_file):
# code to find how many voxels are in the brain region using the mask
# imports
import numpy as np
import nibabel as nib
import os
from os.path import join as opj
mask_data = nib.load(mask_file)
mask = mask_data.get_data()
x_dim, y_dim, z_dim = mask_data.shape
atlasPath = atlas_file
# Read the atlas
atlasObject = nib.load(atlasPath)
atlas = atlasObject.get_data()
num_ROIs = int((np.max(atlas) - np.min(atlas) ))
# Read the brain in_file
brain_data = nib.load(in_file)
brain = brain_data.get_data()
x_dim, y_dim, z_dim, num_volumes = brain.shape
num_brain_voxels = 0
x_dim, y_dim, z_dim = mask_data.shape
for i in range(x_dim):
for j in range(y_dim):
for k in range(z_dim):
if mask[i,j,k] == 1:
num_brain_voxels = num_brain_voxels + 1
# Initialize a matrix of ROI time series and voxel time series
ROI_matrix = np.zeros((num_ROIs, num_volumes))
voxel_matrix = np.zeros((num_brain_voxels, num_volumes))
# Fill up the voxel_matrix
voxel_counter = 0
for i in range(x_dim):
for j in range(y_dim):
for k in range(z_dim):
if mask[i,j,k] == 1:
voxel_matrix[voxel_counter,:] = brain[i,j,k,:]
voxel_counter = voxel_counter + 1
# Fill up the ROI_matrix
# Keep track of number of voxels per ROI as well by using an array - num_voxels_in_ROI[]
num_voxels_in_ROI = np.zeros((num_ROIs,1)) # A column arrray containing number of voxels in each ROI
for i in range(x_dim):
for j in range(y_dim):
for k in range(z_dim):
label = int(atlas[i,j,k]) - 1
if label != -1:
ROI_matrix[label,:] = np.add(ROI_matrix[label,:], brain[i,j,k,:])
num_voxels_in_ROI[label,0] = num_voxels_in_ROI[label,0] + 1
ROI_matrix = np.divide(ROI_matrix,num_voxels_in_ROI) # Check if divide is working correctly
X, Y = ROI_matrix, voxel_matrix
# Subtract mean from X and Y
X = np.subtract(X, np.mean(X, axis=1, keepdims=True))
Y = np.subtract(Y, np.mean(Y, axis=1, keepdims=True))
temp1 = np.dot(X,Y.T)
temp2 = np.sqrt(np.sum(np.multiply(X,X), axis=1, keepdims=True))
temp3 = np.sqrt(np.sum(np.multiply(Y,Y), axis=1, keepdims=True))
temp4 = np.dot(temp2,temp3.T)
coff_matrix = np.divide(temp1, (temp4 + 1e-7))
# Check if any ROI is missing and replace the NAN values in coff_matrix by 0
if np.argwhere(np.isnan(coff_matrix)).shape[0] != 0:
print("Some ROIs are not present. Replacing NAN in coff matrix by 0")
np.nan_to_num(coff_matrix, copy=False)
# TODO: when I have added 1e-7 in the dinominator, then why did I feel the need to replace NAN by zeros
sub_id = in_file.split('/')[-1].split('.')[0].split('_')[0].split('-')[1]
fc_file_name = sub_id + '_fc_map'
print ("Pear Matrix calculated for subject: ",sub_id)
roi_brain_matrix = coff_matrix
brain_file = in_file
x_dim, y_dim, z_dim, t_dim = brain.shape
(brain_data.header).set_data_shape([x_dim,y_dim,z_dim,num_ROIs])
brain_roi_tensor = np.zeros((brain_data.header.get_data_shape()))
print("Creating brain for Subject-",sub_id)
for roi in range(num_ROIs):
brain_voxel_counter = 0
for i in range(x_dim):
for j in range(y_dim):
for k in range(z_dim):
if mask[i,j,k] == 1:
brain_roi_tensor[i,j,k,roi] = roi_brain_matrix[roi,brain_voxel_counter]
brain_voxel_counter = brain_voxel_counter + 1
assert (brain_voxel_counter == len(roi_brain_matrix[roi,:]))
print("Created brain for Subject-",sub_id)
path = os.getcwd()
fc_file_name = fc_file_name + '.nii.gz'
out_file = opj(path,fc_file_name)
brain_with_header = nib.Nifti1Image(brain_roi_tensor, affine=brain_data.affine,header = brain_data.header)
nib.save(brain_with_header,out_file)
fc_map_brain_file = out_file
return fc_map_brain_file
# In[521]:
# Again Create the Node and set default values to paths
pearcoff = Node(Function(function=pear_coff, input_names=['in_file','atlas_file','mask_file'],
output_names=['fc_map_brain_file']), name='pearcoff')
# # IMPORTANT:
# * The ROI 255 has been removed due to resampling. Therefore the FC maps will have nan at that row. So don't use that ROI :)
# * I came to know coz I keep getting this error: RuntimeWarning: invalid value encountered in true_divide
# * To debug it, I read the coff matrix and checked its diagnol to discover the nan value.
#
#
#
# ## Extract volumes
# ExtractROI - For volCorrect
extract = Node(ExtractROI(t_size=-1),
output_type='NIFTI',
name="extract")
# ### Node for applying xformation matrix to functional data
#
# In[523]:
func2std_xform = Node(FLIRT(output_type='NIFTI_GZ',
apply_xfm=True), name="func2std_xform")
# motion_param_regression = 1
# band_pass_filtering = 0
# global_signal_regression = 0
# smoothing = 1
# volcorrect = 1
if num_proc == None:
num_proc = 7
combination = 'motionRegress' + str(int(motion_param_regression)) + \
'global' + str(int(global_signal_regression)) + 'smoothing' + str(int(smoothing)) +\
'filt' + str(int(band_pass_filtering))
print("Combination: ",combination)
binary_string = str(int(motion_param_regression)) + str(int(global_signal_regression)) + \
str(int(smoothing)) + str(int(band_pass_filtering)) + str(int(volcorrect))
base_dir = opj(base_directory,functional_connectivity_directory)
# wf = Workflow(name=functional_connectivity_directory)
wf = Workflow(name=combination)
wf.base_dir = base_dir # Dir where all the outputs will be stored.
wf.connect(infosource ,'subject_id', getSubjectFilenames, 'subject_id')
# ------- Dynamic Pipeline ------------------------
nodes = [
calc_residuals,
globalSignalRemoval,
spatialSmooth,
bandpass,
volCorrect]
# from nipype.interfaces import fsl
old_node = getSubjectFilenames
old_node_output = 'brain'
binary_string = binary_string+'0' # so that the loop runs one more time
for idx, include in enumerate(binary_string):
# 11111
# motion_param_regression
# global_signal_regression
# smoothing
# band_pass_filtering
# volcorrect
if old_node == calc_residuals:
old_node_output = 'out_file'
elif old_node == extract :
old_node_output = 'roi_file'
elif old_node == globalSignalRemoval:
old_node_output = 'out_file'
elif old_node == bandpass:
old_node_output = 'out_file'
elif old_node == highpass:
old_node_output = 'out_file'
elif old_node == spatialSmooth:
old_node_output = 'out_file'
elif old_node == volCorrect:
old_node_output = 'out_file'
if int(include):
# if old_node is None:
#
# wf.add_nodes([nodes[idx]])
#
# else:
new_node = nodes[idx]
if new_node == calc_residuals:
wf.connect([(getSubjectFilenames, calc_residuals, [('motion_param', 'motion_file')])])
new_node_input = 'in_file'
elif new_node == extract :
wf.connect([( volCorrect, extract, [('t_min','t_min')])])
new_node_input = 'in_file'
elif new_node == globalSignalRemoval:
wf.connect([(getSubjectFilenames, globalSignalRemoval, [('mask','mask_file')])])
new_node_input = 'in_file'
elif new_node == bandpass:
wf.connect([(getSubjectFilenames, bandpass, [('tr','tr')])])
new_node_input = 'in_file'
elif new_node == highpass:
wf.connect([(getSubjectFilenames, highpass, [('tr','tr')])]) #Commenting for FSL
new_node_input = 'in_file'
elif new_node == spatialSmooth:
new_node_input = 'in_file'
elif new_node == volCorrect:
wf.connect([(infosource, volCorrect, [('subject_id','sub_id')])])
wf.connect([( volCorrect, extract, [('t_min','t_min')])])
new_node = extract
new_node_input = 'in_file'
wf.connect(old_node, old_node_output, new_node, new_node_input)
old_node = new_node
else:
if idx == 3: # bandpas == 0 => Highpass
new_node = highpass
wf.connect([(getSubjectFilenames, highpass, [('tr','tr')])]) #Commenting for FSL
new_node_input = 'in_file'
wf.connect(old_node, old_node_output, new_node, new_node_input)
old_node = new_node
wf.connect(old_node, old_node_output, pearcoff, 'in_file')
wf.connect(getSubjectFilenames,'atlas', pearcoff, 'atlas_file')
wf.connect(getSubjectFilenames, 'mask', pearcoff, 'mask_file')
wf.connect(pearcoff, 'fc_map_brain_file', func2std_xform ,'in_file')
wf.connect(getSubjectFilenames,'func2std_mat', func2std_xform, 'in_matrix_file')
wf.connect(getSubjectFilenames, 'MNI3mm_path', func2std_xform,'reference')
folder_name = combination + '.@fc_map_brain_file'
wf.connect(func2std_xform, 'out_file', save_file_list, 'in_fc_map_brain_file')
wf.connect(save_file_list, 'out_fc_map_brain_file', dataSink,folder_name)
TEMP_DIR_FOR_STORAGE = opj(base_directory,'crash_files')
wf.config = {"execution": {"crashdump_dir": TEMP_DIR_FOR_STORAGE}}
wf.write_graph(graph2use='flat', format='png')
wf.run('MultiProc', plugin_args={'n_procs': num_proc})
def dti_artifact_correction(wf_name="dti_artifact_correction"):
""" Run the diffusion MRI pre-processing workflow against the diff files in `data_dir`.
It will resample/regrid the diffusion image to have isometric voxels.
Corrects for head motion correction and Eddy currents.
Estimates motion outliers and exports motion reports using nipype.algorithms.RapidArt.
Nipype Inputs
-------------
dti_art_input.diff: traits.File
path to the diffusion MRI image
dti_art_input.bval: traits.File
path to the bvals file
dti_art_input.bvec: traits.File
path to the bvecs file
Nipype Outputs
--------------
dti_art_output.eddy_corr_file: traits.File
Eddy currents corrected DTI image.
dti_art_output.bvec_rotated: traits.File
Rotated bvecs file
dti_art_output.brain_mask_1: traits.File
Brain mask extracted using BET on the first B0 image.
dti_art_output.brain_mask_2: traits.File
Brain mask extracted using BET on the average B0 image,
after motion correction.
dti_art_output.acpq: traits.File
Text file with acquisition parameters calculated for Eddy.
dti_art_output.index: traits.File
Text file with acquisition indices calculated for Eddy.
dti_art_output.avg_b0: traits.File
The average b=0 image extracted from the motion and eddy
currents correted diffusion MRI.
dti_art_output.hmc_corr_file: traits.File
dti_art_output.hmc_corr_bvec: traits.File
dti_art_output.hmc_corr_xfms: traits.File
dti_art_output.art_displacement_files: traits.File
dti_art_output.art_intensity_files: traits.File
dti_art_output.art_norm_files: traits.File
dti_art_output.art_outlier_files: traits.File
dti_art_output.art_plot_files: traits.File
dti_art_output.art_statistic_files: traits.File
Returns
-------
wf: nipype Workflow
"""
# specify input and output fields
in_fields = ["diff", "bval", "bvec"]
out_fields = ["eddy_corr_file",
"bvec_rotated",
"brain_mask_1",
"brain_mask_2",
"acqp",
"index",
"avg_b0",
]
do_rapidart = get_config_setting("dmri.artifact_detect", True)
if do_rapidart:
out_fields += ["hmc_corr_file",
"hmc_corr_bvec",
"hmc_corr_xfms",
"art_displacement_files",
"art_intensity_files",
"art_norm_files",
"art_outlier_files",
"art_plot_files",
"art_statistic_files",
]
# input interface
dti_input = setup_node(IdentityInterface(fields=in_fields, mandatory_inputs=True),
name="dti_art_input")
# resample
resample = setup_node(Function(function=reslice,
input_names=['in_file', 'new_zooms', 'order', 'out_file'],
output_names=['out_file']),
name='dti_reslice')
## extract first b0 for Eddy and HMC brain mask
list_b0 = pe.Node(Function(function=b0_indices,
input_names=['in_bval'],
output_names=['out_idx'],),
name='b0_indices')
extract_b0 = pe.Node(ExtractROI(t_size=1),
name="extract_first_b0")
# For Eddy, the mask is only used for selecting voxels for the estimation of the hyperparameters,
# so isn’t very critical.
# Note also that it is better with a too conservative (small) mask than a too big.
bet_dwi0 = setup_node(BET(frac=0.3, mask=True, robust=True),
name='bet_dwi_pre')
pick_first = lambda lst: lst[0]
# motion artifacts detection, requires linear co-registration for motion estimation.
if do_rapidart:
# head motion correction
hmc = hmc_pipeline()
art = setup_node(rapidart_dti_artifact_detection(), name="detect_artifacts")
# Eddy
eddy = setup_node(Eddy(method='jac'), name="eddy")
## acquisition parameters for Eddy
write_acqp = setup_node(Function(function=dti_acquisition_parameters,
input_names=["in_file"],
output_names=["out_acqp", "out_index"],),
name="write_acqp")
## rotate b-vecs
rot_bvec = setup_node(Function(function=eddy_rotate_bvecs,
input_names=["in_bvec", "eddy_params"],
output_names=["out_file"],),
name="rot_bvec")
## extract all b0s and average them after Eddy correction
avg_b0_post = pe.Node(Function(function=b0_average,
input_names=['in_dwi', 'in_bval'],
output_names=['out_file'],),
name='b0_avg_post')
bet_dwi1 = setup_node(BET(frac=0.3, mask=True, robust=True),
name='bet_dwi_post')
# nlmeans denoise
apply_nlmeans = get_config_setting("dmri.apply_nlmeans", True)
if apply_nlmeans:
nlmeans = setup_node(Function(function=nlmeans_denoise,
input_names=['in_file', 'mask_file', 'out_file', 'N'],
output_names=['out_file']),
name='nlmeans_denoise')
# output interface
dti_output = setup_node(IdentityInterface(fields=out_fields),
name="dti_art_output")
# Create the workflow object
wf = pe.Workflow(name=wf_name)
# Connect the nodes
wf.connect([
# resample to iso-voxel
(dti_input, resample, [("diff", "in_file"),]),
# read from input file the acquisition parameters for eddy
(dti_input, write_acqp, [("diff", "in_file")]),
# reference mask for hmc and eddy
(dti_input, list_b0, [("bval", "in_bval")]),
(resample, extract_b0, [("out_file", "in_file")]),
(list_b0, extract_b0, [(("out_idx", pick_first), "t_min")]),
(extract_b0, bet_dwi0, [("roi_file", "in_file")]),
# Eddy
(resample, eddy, [("out_file", "in_file")]),
(bet_dwi0, eddy, [("mask_file", "in_mask")]),
(dti_input, eddy, [("bval", "in_bval"),
("bvec", "in_bvec")
]),
(write_acqp, eddy, [("out_acqp", "in_acqp"),
("out_index", "in_index")
]),
# rotate bvecs
(dti_input, rot_bvec, [("bvec", "in_bvec")]),
(eddy, rot_bvec, [("out_parameter", "eddy_params")]),
# final avg b0
(dti_input, avg_b0_post, [("bval", "in_bval")]),
(eddy, avg_b0_post, [("out_corrected", "in_dwi" )]),
(avg_b0_post, bet_dwi1, [("out_file", "in_file")]),
# output
(write_acqp, dti_output, [("out_acqp", "acqp"),
("out_index", "index")]),
(bet_dwi0, dti_output, [("mask_file", "brain_mask_1")]),
(bet_dwi1, dti_output, [("mask_file", "brain_mask_2")]),
(rot_bvec, dti_output, [("out_file", "bvec_rotated")]),
(avg_b0_post, dti_output, [("out_file", "avg_b0")]),
])
if apply_nlmeans:
wf.connect([
# non-local means
(eddy, nlmeans, [("out_corrected", "in_file")]),
(bet_dwi1, nlmeans, [("mask_file", "mask_file")]),
# output
(nlmeans, dti_output, [("out_file", "eddy_corr_file")]),
])
else:
wf.connect([
# output
(eddy, dti_output, [("out_corrected", "eddy_corr_file")]),
])
if do_rapidart:
wf.connect([
# head motion correction
(dti_input, hmc, [("bval", "inputnode.in_bval"),
("bvec", "inputnode.in_bvec"),
]),
(resample, hmc, [("out_file", "inputnode.in_file")]),
(bet_dwi0, hmc, [("mask_file", "inputnode.in_mask")]),
(list_b0, hmc, [(("out_idx", pick_first), "inputnode.ref_num"),]),
# artifact detection
(hmc, art, [("outputnode.out_file", "realigned_files"),
("outputnode.out_xfms", "realignment_parameters"),
]),
(bet_dwi1, art, [("mask_file", "mask_file"),]),
# output
(hmc, dti_output, [("outputnode.out_file", "hmc_corr_file"),
("outputnode.out_bvec", "hmc_corr_bvec"),
("outputnode.out_xfms", "hmc_corr_xfms"),
]),
(art, dti_output, [("displacement_files", "art_displacement_files"),
("intensity_files", "art_intensity_files"),
("norm_files", "art_norm_files"),
("outlier_files", "art_outlier_files"),
("plot_files", "art_plot_files"),
("statistic_files", "art_statistic_files"),
]),
])
return wf
"versions": [{
"title": Merge().version or "1.0",
"description":
f"Default fslmerge version for nipype {_NIPYPE_VERSION}.", # noqa: E501
"input": FSLMERGE_INPUT_SPECIFICATION,
"output": FSLMERGE_OUTPUT_SPECIFICATION,
"nested_results_attribute": "outputs.get_traitsfree",
}],
},
{
"title":
"fslroi",
"description":
"Extracts specific ROI from image.",
"versions": [{
"title": ExtractROI().version or "1.0",
"description":
f"Default fslroi version for nipype {_NIPYPE_VERSION}.", # noqa: E501
"input": FSLROI_INPUT_SPECIFICATION,
"output": FSLROI_OUTPUT_SPECIFICATION,
"nested_results_attribute": "outputs.get_traitsfree",
}],
},
{
"title":
"topup",
"description":
"Estimates and corrects susceptibillity induced distortions.", # noqa: E501
"versions": [{
"title": TOPUP().version or "1.0",
"description":
def init_eddy_wf(debug=False, name="eddy_wf"):
"""
Create a workflow for head-motion & Eddy currents distortion estimation with FSL.
Parameters
----------
name : :obj:`str`
Name of workflow (default: ``eddy_wf``)
Inputs
------
dwi_file
dwi NIfTI file
Outputs
-------
out_eddy
The eddy corrected diffusion image..
"""
from nipype.interfaces.fsl import Eddy, ExtractROI
inputnode = pe.Node(
niu.IdentityInterface(
fields=["dwi_file", "metadata", "dwi_mask", "in_bvec", "in_bval"]
),
name="inputnode",
)
outputnode = pe.Node(
niu.IdentityInterface(
fields=["out_rotated_bvecs", "eddy_ref_image", "out_eddy"]
),
name="outputnode",
)
workflow = Workflow(name=name)
workflow.__desc__ = f"""\
Geometrical distortions derived from the so-called Eddy-currents, and head-motion
realignment parameters were estimated with the joint modeling of ``eddy_openmp``,
included in FSL {Eddy().version} [@eddy].
"""
eddy = pe.Node(
Eddy(),
name="eddy",
)
if debug:
eddy.inputs.niter = 1
eddy.inputs.is_shelled = True
eddy.inputs.dont_peas = True
eddy.inputs.nvoxhp = 100
# Generate the acqp and index files for eddy
gen_eddy_files = pe.Node(
niu.Function(
input_names=["in_file", "in_meta"],
output_names=["out_acqparams", "out_index"],
function=gen_eddy_textfiles,
),
name="gen_eddy_files",
)
eddy_ref_img = pe.Node(ExtractROI(t_min=0, t_size=1), name="eddy_roi")
# fmt:off
workflow.connect([
(inputnode, eddy, [
("dwi_file", "in_file"),
("dwi_mask", "in_mask"),
("in_bvec", "in_bvec"),
("in_bval", "in_bval"),
]),
(inputnode, gen_eddy_files, [
("dwi_file", "in_file"),
("metadata", "in_meta")
]),
(gen_eddy_files, eddy, [
("out_acqparams", "in_acqp"),
("out_index", "in_index"),
]),
(eddy, outputnode, [
("out_corrected", "out_eddy"),
("out_rotated_bvecs", "out_rotated_bvecs")
]),
(eddy, eddy_ref_img, [("out_corrected", "in_file")]),
(eddy_ref_img, outputnode, [("roi_file", "eddy_ref_image")]),
])
# fmt:on
return workflow
def trimT(in_file, roi_file, t_min=0, t_size=-1):
ExtractROI(in_file=in_file, roi_file=roi_file, t_min=t_min,
t_size=t_size).run()
def make_w_preproc_anna():
n_in = Node(IdentityInterface(fields=[
'prf_run1',
'prf_run2',
]), name='input')
n_out = Node(IdentityInterface(fields=[
'prf_preproc',
]), name='output')
n_roi = Node(ExtractROI(), name='roi')
n_roi.inputs.t_min = 5
n_roi.inputs.t_size = 1
n_volreg = Node(interface=Volreg(), name='volreg')
n_volreg.inputs.outputtype = 'NIFTI'
n_volreg.inputs.zpad = 1
n_volreg.inputs.oned_file = 'pRF_run1_mov.1D'
n_volreg2 = Node(interface=Volreg(), name='volreg2')
n_volreg2.inputs.outputtype = 'NIFTI'
n_volreg2.inputs.zpad = 1
n_volreg2.inputs.oned_file = 'pRF_run2_mov.1D'
n_tcat = Node(interface=TCat(), name='tcat')
n_tcat.inputs.outputtype = 'NIFTI'
n_tcat.inputs.rlt = '++'
n_tcat2 = Node(interface=TCat(), name='tcat2')
n_tcat2.inputs.outputtype = 'NIFTI'
n_tcat2.inputs.rlt = '++'
n_tcat = Node(interface=TCat(), name='tcat')
n_tcat.inputs.outputtype = 'NIFTI'
n_tcat.inputs.rlt = '++'
n_tcat2 = Node(interface=TCat(), name='tcat2')
n_tcat2.inputs.outputtype = 'NIFTI'
n_tcat2.inputs.rlt = '++'
n_clip1 = Node(ClipLevel(), 'clip1')
n_clip2 = Node(ClipLevel(), 'clip2')
n_clip_both = Node(ClipLevel(), 'clip_both')
n_mask1 = Node(Automask(), 'mask1')
n_mask1.inputs.outputtype = 'NIFTI'
n_mask2 = Node(Automask(), 'mask2')
n_mask2.inputs.outputtype = 'NIFTI'
n_mask_both = Node(Automask(), 'mask_both')
n_mask_both.inputs.outputtype = 'NIFTI'
n_calc1 = Node(Calc(), 'calc1')
n_calc1.inputs.expr = 'step(a)*b'
n_calc1.inputs.outputtype = 'NIFTI'
n_calc2 = Node(Calc(), 'calc2')
n_calc2.inputs.expr = 'step(a)*b'
n_calc2.inputs.outputtype = 'NIFTI'
n_calc_both = Node(Calc(), 'calc_both')
n_calc_both.inputs.expr = 'step(a)*b'
n_calc_both.inputs.outputtype = 'NIFTI'
n_mean1 = Node(TStat(), 'mean1')
n_mean1.inputs.outputtype = 'NIFTI'
n_mean2 = Node(TStat(), 'mean2')
n_mean2.inputs.outputtype = 'NIFTI'
n_ratio1 = Node(Calc(), 'ratio1')
n_ratio1.inputs.expr = '(a/b)'
n_ratio1.inputs.outputtype = 'NIFTI'
n_ratio1.inputs.args = '-fscale'
n_means = Node(Means(), name='means')
n_means.inputs.datum = 'float'
n_means.inputs.outputtype = 'NIFTI'
w = Workflow('nipype_prf')
w.connect(n_in, 'prf_run1', n_roi, 'in_file')
w.connect(n_in, 'prf_run1', n_volreg, 'in_file')
w.connect(n_roi, 'roi_file', n_volreg, 'basefile')
w.connect(n_volreg, 'out_file', n_tcat, 'in_files')
w.connect(n_in, 'prf_run2', n_volreg2, 'in_file')
w.connect(n_roi, 'roi_file', n_volreg2, 'basefile')
w.connect(n_volreg2, 'out_file', n_tcat2, 'in_files')
w.connect(n_tcat, 'out_file', n_clip1, 'in_file')
w.connect(n_tcat2, 'out_file', n_clip2, 'in_file')
w.connect(n_tcat, 'out_file', n_mask1, 'in_file')
w.connect(n_clip1, ('clip_val', _to_args), n_mask1, 'args')
w.connect(n_tcat2, 'out_file', n_mask2, 'in_file')
w.connect(n_clip2, ('clip_val', _to_args), n_mask2, 'args')
w.connect(n_mask1, 'out_file', n_calc1, 'in_file_a')
w.connect(n_tcat, 'out_file', n_calc1, 'in_file_b')
w.connect(n_mask2, 'out_file', n_calc2, 'in_file_a')
w.connect(n_tcat2, 'out_file', n_calc2, 'in_file_b')
w.connect(n_tcat, 'out_file', n_mean1, 'in_file')
w.connect(n_tcat2, 'out_file', n_mean2, 'in_file')
w.connect(n_tcat, 'out_file', n_means, 'in_file_a')
w.connect(n_tcat2, 'out_file', n_means, 'in_file_b')
w.connect(n_means, 'out_file', n_mask_both, 'in_file')
w.connect(n_means, 'out_file', n_clip_both, 'in_file')
w.connect(n_clip_both, ('clip_val', _to_args), n_mask_both, 'args')
w.connect(n_mask_both, 'out_file', n_calc_both, 'in_file_a')
w.connect(n_means, 'out_file', n_calc_both, 'in_file_b')
w.connect(n_calc_both, 'out_file', n_out, 'prf_preproc')
return w
python3_env = "daniel"
python2_env = "daniel2"
cleanup = True
""" do not edit below """
for i in range(len(file_in)):
# get fileparts of input
path_file, name_file, ext_file = get_filename(file_in[i])
# filenames
file_vol0 = os.path.join(path_file, name_file + "_vol0" + ext_file)
file_out = os.path.join(path_file, name_file + "_gnlcorr" + ext_file)
# extract first volume
fslroi = ExtractROI()
fslroi.inputs.in_file = file_in[i]
fslroi.inputs.roi_file = file_vol0
fslroi.inputs.output_type = "NIFTI"
fslroi.inputs.t_min = 0
fslroi.inputs.t_size = 1
fslroi.run()
# exexute gnl correction
gnl_correction(file_vol0, file_bash, file_coeff, python3_env, python2_env,
path_file, False)
# apply warp to first volume
applywarp = ApplyWarp()
applywarp.inputs.in_file = file_in[i]
applywarp.inputs.ref_file = file_in[i]
def preproc(data_dir, sink_dir, subject, task, session, run, masks,
motion_thresh, moco):
from nipype.interfaces.fsl import MCFLIRT, FLIRT, FNIRT, ExtractROI, ApplyWarp, MotionOutliers, InvWarp, FAST
#from nipype.interfaces.afni import AlignEpiAnatPy
from nipype.interfaces.utility import Function
from nilearn.plotting import plot_anat
from nilearn import input_data
#WRITE A DARA GRABBER
def get_niftis(subject_id, data_dir, task, run, session):
from os.path import join, exists
t1 = join(data_dir, subject_id, 'session-{0}'.format(session),
'anatomical', 'anatomical-0', 'anatomical.nii.gz')
#t1_brain_mask = join(data_dir, subject_id, 'session-1', 'anatomical', 'anatomical-0', 'fsl', 'anatomical-bet.nii.gz')
epi = join(data_dir, subject_id, 'session-{0}'.format(session), task,
'{0}-{1}'.format(task, run), '{0}.nii.gz'.format(task))
assert exists(t1), "t1 does not exist at {0}".format(t1)
assert exists(epi), "epi does not exist at {0}".format(epi)
standard = '/home/applications/fsl/5.0.8/data/standard/MNI152_T1_2mm.nii.gz'
return t1, epi, standard
data = Function(
function=get_niftis,
input_names=["subject_id", "data_dir", "task", "run", "session"],
output_names=["t1", "epi", "standard"])
data.inputs.data_dir = data_dir
data.inputs.subject_id = subject
data.inputs.run = run
data.inputs.session = session
data.inputs.task = task
grabber = data.run()
if session == 0:
sesh = 'pre'
if session == 1:
sesh = 'post'
#reg_dir = '/home/data/nbc/physics-learning/data/first-level/{0}/session-1/retr/retr-{1}/retr-5mm.feat/reg'.format(subject, run)
#set output paths for quality assurance pngs
qa1 = join(
sink_dir, 'qa',
'{0}-session-{1}_{2}-{3}_t1_flirt.png'.format(subject, session, task,
run))
qa2 = join(
sink_dir, 'qa',
'{0}-session-{1}_{2}-{3}_mni_flirt.png'.format(subject, session, task,
run))
qa3 = join(
sink_dir, 'qa',
'{0}-session-{1}_{2}-{3}_mni_fnirt.png'.format(subject, session, task,
run))
confound_file = join(
sink_dir, sesh, subject,
'{0}-session-{1}_{2}-{3}_confounds.txt'.format(subject, session, task,
run))
#run motion correction if indicated
if moco == True:
mcflirt = MCFLIRT(ref_vol=144, save_plots=True, output_type='NIFTI_GZ')
mcflirt.inputs.in_file = grabber.outputs.epi
#mcflirt.inputs.in_file = join(data_dir, subject, 'session-1', 'retr', 'retr-{0}'.format(run), 'retr.nii.gz')
mcflirt.inputs.out_file = join(
sink_dir, sesh, subject,
'{0}-session-{1}_{2}-{3}_mcf.nii.gz'.format(
subject, session, task, run))
flirty = mcflirt.run()
motion = np.genfromtxt(flirty.outputs.par_file)
else:
print "no moco needed"
motion = 0
#calculate motion outliers
try:
mout = MotionOutliers(metric='fd', threshold=motion_thresh)
mout.inputs.in_file = grabber.outputs.epi
mout.inputs.out_file = join(
sink_dir, sesh, subject,
'{0}-session-{1}_{2}-{3}_fd-gt-{3}mm'.format(
subject, session, task, run, motion_thresh))
mout.inputs.out_metric_plot = join(
sink_dir, sesh, subject,
'{0}-session-{1}_{2}-{3}_metrics.png'.format(
subject, session, task, run))
mout.inputs.out_metric_values = join(
sink_dir, sesh, subject,
'{0}-session-{1}_{2}-{3}_fd.txt'.format(subject, session, task,
run))
moutliers = mout.run()
outliers = np.genfromtxt(moutliers.outputs.out_file)
e = 'no errors in motion outliers, yay'
except Exception as e:
print(e)
outliers = np.genfromtxt(mout.inputs.out_metric_values)
#set everything above the threshold to 1 and everything below to 0
outliers[outliers > motion_thresh] = 1
outliers[outliers < motion_thresh] = 0
#concatenate motion parameters and motion outliers to form confounds file
#outliers = outliers.reshape((outliers.shape[0],1))
conf = outliers
np.savetxt(confound_file, conf, delimiter=',')
#extract an example volume for normalization
ex_fun = ExtractROI(t_min=144, t_size=1)
ex_fun.inputs.in_file = flirty.outputs.out_file
ex_fun.inputs.roi_file = join(
sink_dir, sesh, subject,
'{0}-session-{1}_{2}-{3}-example_func.nii.gz'.format(
subject, session, task, run))
fun = ex_fun.run()
warp = ApplyWarp(interp="nn", abswarp=True)
if not exists(
'/home/data/nbc/physics-learning/data/first-level/{0}/session-{1}/{2}/{2}-{3}/{2}-5mm.feat/reg/example_func2standard_warp.nii.gz'
.format(subject, session, task, run)):
#two-step normalization using flirt and fnirt, outputting qa pix
flit = FLIRT(cost_func="corratio", dof=12)
reg_func = flit.run(
reference=fun.outputs.roi_file,
in_file=grabber.outputs.t1,
searchr_x=[-180, 180],
searchr_y=[-180, 180],
out_file=join(
sink_dir, sesh, subject,
'{0}-session-{1}_{2}-{3}_t1-flirt.nii.gz'.format(
subject, session, task, run)),
out_matrix_file=join(
sink_dir, sesh, subject,
'{0}-session-{1}_{2}-{3}_t1-flirt.mat'.format(
subject, session, task, run)))
reg_mni = flit.run(
reference=grabber.outputs.t1,
in_file=grabber.outputs.standard,
searchr_y=[-180, 180],
searchr_z=[-180, 180],
out_file=join(
sink_dir, sesh, subject,
'{0}-session-{1}_{2}-{3}_mni-flirt-t1.nii.gz'.format(
subject, session, task, run)),
out_matrix_file=join(
sink_dir, sesh, subject,
'{0}-session-{1}_{2}-{3}_mni-flirt-t1.mat'.format(
subject, session, task, run)))
#plot_stat_map(aligner.outputs.out_file, bg_img=fun.outputs.roi_file, colorbar=True, draw_cross=False, threshold=1000, output_file=qa1a, dim=-2)
display = plot_anat(fun.outputs.roi_file, dim=-1)
display.add_edges(reg_func.outputs.out_file)
display.savefig(qa1, dpi=300)
display.close()
display = plot_anat(grabber.outputs.t1, dim=-1)
display.add_edges(reg_mni.outputs.out_file)
display.savefig(qa2, dpi=300)
display.close()
perf = FNIRT(output_type='NIFTI_GZ')
perf.inputs.warped_file = join(
sink_dir, sesh, subject,
'{0}-session-{1}_{2}-{3}_mni-fnirt-t1.nii.gz'.format(
subject, session, task, run))
perf.inputs.affine_file = reg_mni.outputs.out_matrix_file
perf.inputs.in_file = grabber.outputs.standard
perf.inputs.subsampling_scheme = [8, 4, 2, 2]
perf.inputs.fieldcoeff_file = join(
sink_dir, sesh, subject,
'{0}-session-{1}_{2}-{3}_mni-fnirt-t1-warpcoeff.nii.gz'.format(
subject, session, task, run))
perf.inputs.field_file = join(
sink_dir, sesh, subject,
'{0}-session-{1}_{2}-{3}_mni-fnirt-t1-warp.nii.gz'.format(
subject, session, task, run))
perf.inputs.ref_file = grabber.outputs.t1
reg2 = perf.run()
warp.inputs.field_file = reg2.outputs.field_file
#plot fnirted MNI overlaid on example func
display = plot_anat(grabber.outputs.t1, dim=-1)
display.add_edges(reg2.outputs.warped_file)
display.savefig(qa3, dpi=300)
display.close()
else:
warpspeed = InvWarp(output_type='NIFTI_GZ')
warpspeed.inputs.warp = '/home/data/nbc/physics-learning/data/first-level/{0}/session-{1}/{2}/{2}-{3}/{2}-5mm.feat/reg/example_func2standard_warp.nii.gz'.format(
subject, session, task, run)
warpspeed.inputs.reference = fun.outputs.roi_file
warpspeed.inputs.inverse_warp = join(
sink_dir, sesh, subject,
'{0}-session-{1}_{2}-{3}_mni-fnirt-t1-warp.nii.gz'.format(
subject, session, task, run))
mni2epiwarp = warpspeed.run()
warp.inputs.field_file = mni2epiwarp.outputs.inverse_warp
for key in masks.keys():
#warp takes us from mni to epi
warp.inputs.in_file = masks[key]
warp.inputs.ref_file = fun.outputs.roi_file
warp.inputs.out_file = join(
sink_dir, sesh, subject,
'{0}-session-{1}_{2}-{3}_{4}.nii.gz'.format(
subject, session, task, run, key))
net_warp = warp.run()
qa_file = join(
sink_dir, 'qa', '{0}-session-{1}_{2}-{3}_qa_{4}.png'.format(
subject, session, task, run, key))
display = plotting.plot_roi(net_warp.outputs.out_file,
bg_img=fun.outputs.roi_file,
colorbar=True,
vmin=0,
vmax=18,
draw_cross=False)
display.savefig(qa_file, dpi=300)
display.close()
return flirty.outputs.out_file, confound_file, e
def __init__(self, parent, dir_dic, bids):
super().__init__(parent, dir_dic, bids)
# Create interfaces ============================================================================================
# BET
T1w_BET = Node(BET(), name="T1w_BET")
T1w_BET.btn_string = 'T1w Brain Extraction'
self.interfaces.append(T1w_BET)
T1w_gad_BET = Node(BET(), name="T1w_gad_BET")
T1w_gad_BET.btn_string = 'T1w Gadolinium Enhanced Brain Extraction'
self.interfaces.append(T1w_gad_BET)
T2w_dbs_BET = Node(BET(), name="T2w_dbs_BET")
T2w_dbs_BET.btn_string = 'T2w DBS Acquisition Brain Extraction'
self.interfaces.append(T2w_dbs_BET)
dwi_BET = Node(BET(), name="dwi_BET")
dwi_BET.btn_string = 'dwi Brain Extraction'
self.interfaces.append(dwi_BET)
# BFC
T1w_BFC = Node(N4BiasFieldCorrection(), name="T1w_BFC")
T1w_BFC.btn_string = 'T1w Bias Field Correction'
self.interfaces.append(T1w_BFC)
# Split
dwi_ROI_b0 = Node(ExtractROI(), name="dwi_ROI_b0")
dwi_ROI_b0.btn_string = 'dwi Extract b0'
self.interfaces.append(dwi_ROI_b0)
# Eddy current correction
dwi_Eddy = Node(Eddy(), name="dwi_Eddy")
dwi_Eddy.btn_string = 'dwi Eddy Current Correction'
self.interfaces.append(dwi_Eddy)
# Distortion correction
# as this section is script/comment heavy it was put into a function
self.distortion_correction_workflow()
# Data output (i.e. sink) ======================================================================================
self.sink = Node(DataSink(), name="sink")
self.sink.btn_string = 'data sink'
self.sink.inputs.base_directory = self.dir_dic['data_dir']
self.jsink = Node(JSONFileSink(), name="jsink")
self.jsink.btn_string = 'json sink'
self.jsink.inputs.base_directory = self.dir_dic['data_dir']
# Initialize workflow ==========================================================================================
self.wf = Workflow(name='pre_processing')
# T1w BET to ants N4BiasFieldCorrection
self.wf.connect([(self.return_interface("T1w_BET"),
self.return_interface("T1w_BFC"),
[("out_file", "input_image")])])
self.wf.connect([(self.return_interface("T1w_BET"),
self.return_interface("T1w_BFC"), [("mask_file",
"mask_image")])])
# Eddy
self.wf.connect([(self.return_interface("dwi_BET"),
self.return_interface("dwi_Eddy"), [("out_file",
"in_file")])])
self.wf.connect([(self.return_interface("dwi_BET"),
self.return_interface("dwi_Eddy"), [("mask_file",
"in_mask")])])
# ROI b0
self.wf.connect([(self.return_interface("dwi_Eddy"),
self.return_interface("dwi_ROI_b0"),
[("out_corrected", "in_file")])])
# Distortion Correction:
# b0_T1_Reg:
# -i: moving image
# -r: T1
# -x: T1 mask
self.wf.connect([(self.return_interface("dwi_ROI_b0"),
self.return_interface("b0_T1w_Reg"),
[("roi_file", "moving_image")])])
self.wf.connect([(self.return_interface("T1w_BFC"),
self.return_interface("b0_T1w_Reg"),
[("output_image", "fixed_image")])])
# test remove as doesn't seem useful (see self.distortion_correction_workflow()) and causes a crash when added
# self.wf.connect([(self.return_interface("T1w_BET"), self.return_interface("b0_T1w_Reg"),
# [("mask_file", "fixed_image_mask")])])
# dwi_T1_Tran:
# -i: Eddy corrected image
# -r: Eddy corrected b0
# -t: transforms
self.wf.connect([(self.return_interface("dwi_Eddy"),
self.return_interface("dwi_T1w_Tran"),
[("out_corrected", "input_image")])])
self.wf.connect([(self.return_interface("dwi_ROI_b0"),
self.return_interface("dwi_T1w_Tran"),
[("roi_file", "reference_image")])])
self.wf.connect([(self.return_interface("b0_T1w_Reg"),
self.return_interface("dwi_T1w_Tran"),
[("composite_transform", "transforms")])])
# BaseInterface generates a dict mapping button strings to the workflow nodes
# self.map_workflow()
graph_file = self.wf.write_graph("pre_processing", graph2use='flat')
self.graph_file = graph_file.replace("pre_processing.png",
"pre_processing_detailed.png")
self.init_settings()
self.init_ui()
def convert_single_subject(subj_folder):
import os
import nibabel as nb
import numpy as np
t1_folder = path.join(subj_folder, "PROCESSED", "MPRAGE", "SUBJ_111")
subj_id = os.path.basename(subj_folder)
print("Converting ", subj_id)
numerical_id = (subj_id.split("_"))[1]
bids_id = "sub-OASIS1" + str(numerical_id)
bids_subj_folder = path.join(dest_dir, bids_id)
if not os.path.isdir(bids_subj_folder):
os.mkdir(bids_subj_folder)
session_folder = path.join(bids_subj_folder, "ses-M00")
if not os.path.isdir(session_folder):
os.mkdir(path.join(session_folder))
os.mkdir(path.join(session_folder, "anat"))
# In order do convert the Analyze format to Nifti the path to the .img file is required
img_file_path = glob(path.join(t1_folder, "*.img"))[0]
output_path = path.join(
session_folder, "anat", bids_id + "_ses-M00_T1w.nii.gz"
)
# First, convert to Nifti so that we can extract the s_form with NiBabel
# (NiBabel creates an 'Spm2AnalyzeImage' object that does not contain 'get_sform' method
img_with_wrong_orientation_analyze = nb.load(img_file_path)
# OASIS-1 images have the same header but sform is incorrect
# To solve this issue, we use header from images converted with FreeSurfer
# to generate a 'clean hard-coded' header
# affine:
# [[ 0. 0. -1. 80.]
# [ 1. 0. 0. -128.]
# [ 0. 1. 0. -128.]
# [ 0. 0. 0. 1.]]
# fmt: off
affine = np.array(
[
0, 0, -1, 80,
1, 0, 0, -128,
0, 1, 0, -128,
0, 0, 0, 1
]
).reshape(4, 4)
# fmt: on
s_form = affine.astype(np.int16)
hdr = nb.Nifti1Header()
hdr.set_data_shape((256, 256, 160))
hdr.set_data_dtype(np.int16)
hdr["bitpix"] = 16
hdr.set_sform(s_form, code="scanner")
hdr.set_qform(s_form, code="scanner")
hdr["extents"] = 16384
hdr["xyzt_units"] = 10
img_with_good_orientation_nifti = nb.Nifti1Image(
np.round(img_with_wrong_orientation_analyze.get_data()).astype(
np.int16
),
s_form,
header=hdr,
)
nb.save(img_with_good_orientation_nifti, output_path)
# Header correction to obtain dim0 = 3
fslroi = ExtractROI(
in_file=output_path, roi_file=output_path, t_min=0, t_size=1
)
fslroi.run()
import os
from os.path import abspath
from datetime import datetime
from IPython.display import Image
import pydot
from nipype import Workflow, Node, MapNode, Function, config
from nipype.interfaces.fsl import TOPUP, ApplyTOPUP, BET, ExtractROI, Eddy, FLIRT, FUGUE
from nipype.interfaces.fsl.maths import MathsCommand
import nipype.interfaces.utility as util
import nipype.interfaces.mrtrix3 as mrt
#Requirements for the workflow to run smoothly: All files as in NIfTI-format and named according to the following standard:
#Images are from the tonotopy DKI sequences on the 7T Philips Achieva scanner in Lund. It should work with any DKI sequence and possibly also a standard DTI but the setting for B0-corrections, epi-distortion corrections and eddy current corrections will be wrong.
#DKI file has a base name shared with bvec and bval in FSL format. E.g. "DKI.nii.gz" "DKI.bvec" and "DKI.bval".
#There is one b0-volume with reversed (P->A) phase encoding called DKIbase+_revenc. E.g. "DKI_revenc.nii.gz".
#Philips B0-map magnitude and phase offset (in Hz) images.
#One input file for topup describing the images as specified by topup.
#Set nbrOfThreads to number of available CPU threads to run the analyses.
### Need to make better revenc for the 15 version if we choose to use it (i.e. same TE and TR)
#Set to relevant directory/parameters
datadir=os.path.abspath("/Users/ling-men/Documents/MRData/testDKI")
rawDKI_base='DKI_15'
B0map_base = 'B0map'
nbrOfThreads=6
print_graph = True
acqparam_file = os.path.join(datadir,'acqparams.txt')
index_file = os.path.join(datadir,'index.txt')
####
#config.enable_debug_mode()
DKI_nii=os.path.join(datadir, rawDKI_base+'.nii.gz')
DKI_bval=os.path.join(datadir, rawDKI_base+'.bval')
#####################################################
### If Specified Create FMAP From DWI NIFTI Files ###
#####################################################
DWI_FMAP=list(filter(lambda x: "_dwi.nii.gz" in x, FMAP_SCANS))
if OPT_GEN_FMAP_DWI == "TRUE" and DWI_SCANS and DWI_FMAP:
JSON=list(filter(lambda x: "_dwi.json" in x, DWI_SCANS))[0]
NIFTI=list(filter(lambda x: "_dwi.nii.gz" in x, DWI_SCANS))[0]
CONTENT=json.load(open(JSON), object_pairs_hook=OrderedDict)
PHASE_NEW=DICT_DIR.get(CONTENT.get("PhaseEncodingDirection"))
TEMP_OUTPUT=list(filter(lambda x: "_dwi.nii.gz" in x, FMAP_SCANS))[0].replace("","")
OUTPUT=TEMP_OUTPUT.replace([x for x in TEMP_OUTPUT.split("_") if "acq-" in x][0],"acq-{}".format(PHASE_NEW))
Extract = ExtractROI(
in_file=NIFTI,
roi_file=OUTPUT,
output_type="NIFTI_GZ",
t_min=0,
t_size=1)
Extract.run()
json.dump(CONTENT, open(OUTPUT.replace("nii.gz","json"), "w"), indent=12)
FMAP_SCANS=list(filter(lambda x:'/fmap/sub-' in x, directory_structure(DIR_SUB)))
#############################################################
### Create Directionary Keys of Task Names for FUNC Scans ###
#############################################################
if FUNC_SCANS:
FUNC_JSONS=list(filter(lambda x:'bold.json' in x, FUNC_SCANS))
for FUNC_JSON in FUNC_JSONS:
if any(not 'task-' for elem in os.path.basename(FUNC_JSON).split("_")):
Error = open(os.path.join('.', 'Fatal_BIDS_Error.txt'), 'w')
def make_workflow(n_fmap=10):
n_in = Node(IdentityInterface(fields=[
'func',
'fmap',
]), name='input')
n_out = Node(IdentityInterface(fields=[
'func1',
'func2',
'mean',
]), name='output')
w = Workflow('preproc')
w_mc_func = make_w_mcmean('func')
if n_fmap == 1: # nipype cannot handle conditional nodes
w_mc_fmap = identify_workflow()
else:
w_mc_fmap = make_w_mcmean('fmap')
w_masking = make_w_masking()
w_warp = make_w_warp()
n_apply = Node(interface=NwarpApply(), name='warpapply')
n_apply.inputs.out_file = 'preprocessed.nii'
n_mean = Node(interface=TStat(), name='mean')
n_mean.inputs.args = '-mean'
n_mean.inputs.outputtype = 'NIFTI_GZ'
n_roi1 = Node(ExtractROI(), 'split1')
n_roi1.inputs.t_min = 0
n_roi1.inputs.roi_file = 'preprocessed_1.nii.gz'
n_roi2 = Node(ExtractROI(), 'split2')
n_roi2.inputs.roi_file = 'preprocessed_2.nii.gz'
w.connect(n_in, 'fmap', w_mc_fmap, 'input.epi')
w.connect(w_mc_fmap, 'output.mean', w_masking, 'input.fmap')
w.connect(n_in, 'func', w_masking, 'input.func')
w.connect(w_masking, 'output.func', w_mc_func, 'input.epi')
w.connect(w_masking, 'output.fmap', w_warp, 'input.fmap')
w.connect(w_mc_func, 'output.mean', w_warp, 'input.func')
w.connect(w_mc_func, 'output.motion_parameters', w_warp, 'input.motion_parameters')
w.connect(w_warp, 'output.warping', n_apply, 'warp')
w.connect(w_masking, 'output.func', n_apply, 'in_file')
w.connect(w_mc_fmap, 'output.mean', n_apply, 'master')
w.connect(n_apply, 'out_file', n_mean, 'in_file')
w.connect(n_apply, 'out_file', n_roi1, 'in_file')
w.connect(n_apply, ('out_file', _half_dynamics), n_roi1, 't_size')
w.connect(n_apply, 'out_file', n_roi2, 'in_file')
w.connect(n_apply, ('out_file', _half_dynamics), n_roi2, 't_min')
w.connect(n_apply, ('out_file', _half_dynamics), n_roi2, 't_size')
w.connect(n_mean, 'out_file', n_out, 'mean')
w.connect(n_roi1, 'roi_file', n_out, 'func1')
w.connect(n_roi2, 'roi_file', n_out, 'func2')
return w
def run(base_dir):
template = '/home/brainlab/Desktop/Rudas/Data/Parcellation/TPM.nii'
matlab_cmd = '/home/brainlab/Desktop/Rudas/Tools/spm12_r7487/spm12/run_spm12.sh /home/brainlab/Desktop/Rudas/Tools/MCR/v713/ script'
spm.SPMCommand.set_mlab_paths(matlab_cmd=matlab_cmd, use_mcr=True)
print('SPM version: ' + str(spm.SPMCommand().version))
structural_dir = '/home/brainlab/Desktop/Rudas/Data/Propofol/Structurals/'
experiment_dir = opj(base_dir, 'output/')
output_dir = 'datasink'
working_dir = 'workingdir'
'''
subject_list = ['2014_05_02_02CB',
'2014_05_16_16RA',
'2014_05_30_30AQ',
'2014_07_04_04HD']
'''
subject_list = [
'2014_05_02_02CB', '2014_05_16_16RA', '2014_05_30_30AQ',
'2014_07_04_04HD', '2014_07_04_04SG', '2014_08_13_13CA',
'2014_10_08_08BC', '2014_10_08_08VR', '2014_10_22_22CY',
'2014_10_22_22TK', '2014_11_17_17EK', '2014_11_17_17NA',
'2014_11_19_19SA', '2014_11_19_AK', '2014_11_25.25JK',
'2014_11_27_27HF', '2014_12_10_10JR'
]
# list of subject identifiers
fwhm = 8 # Smoothing widths to apply (Gaussian kernel size)
TR = 2 # Repetition time
init_volume = 0 # Firts volumen identification which will use in the pipeline
iso_size = 2 # Isometric resample of functional images to voxel size (in mm)
# ExtractROI - skip dummy scans
extract = Node(ExtractROI(t_min=init_volume,
t_size=-1,
output_type='NIFTI'),
name="extract")
# MCFLIRT - motion correction
mcflirt = Node(MCFLIRT(mean_vol=True, save_plots=True,
output_type='NIFTI'),
name="motion_correction")
# SliceTimer - correct for slice wise acquisition
slicetimer = Node(SliceTimer(index_dir=False,
interleaved=True,
output_type='NIFTI',
time_repetition=TR),
name="slice_timing_correction")
# Smooth - image smoothing
smooth = Node(spm.Smooth(fwhm=fwhm), name="smooth")
n4bias = Node(N4Bias(out_file='t1_n4bias.nii.gz'), name='n4bias')
descomposition = Node(Descomposition(n_components=20,
low_pass=0.1,
high_pass=0.01,
tr=TR),
name='descomposition')
# Artifact Detection - determines outliers in functional images
art = Node(ArtifactDetect(norm_threshold=2,
zintensity_threshold=3,
mask_type='spm_global',
parameter_source='FSL',
use_differences=[True, False],
plot_type='svg'),
name="artifact_detection")
extract_confounds_ws_csf = Node(
ExtractConfounds(out_file='ev_without_gs.csv'),
name='extract_confounds_ws_csf')
extract_confounds_gs = Node(ExtractConfounds(out_file='ev_with_gs.csv',
delimiter=','),
name='extract_confounds_global_signal')
signal_extraction = Node(SignalExtraction(
time_series_out_file='time_series.csv',
correlation_matrix_out_file='correlation_matrix.png',
atlas_identifier='cort-maxprob-thr25-2mm',
tr=TR,
plot=True),
name='signal_extraction')
art_remotion = Node(ArtifacRemotion(out_file='fmri_art_removed.nii'),
name='artifact_remotion')
# BET - Skullstrip anatomical anf funtional images
bet_t1 = Node(BET(frac=0.5, robust=True, mask=True,
output_type='NIFTI_GZ'),
name="bet_t1")
# FAST - Image Segmentation
segmentation = Node(FAST(output_type='NIFTI'), name="segmentation")
# Normalize - normalizes functional and structural images to the MNI template
normalize_fmri = Node(Normalize12(jobtype='estwrite',
tpm=template,
write_voxel_sizes=[2, 2, 2],
write_bounding_box=[[-90, -126, -72],
[90, 90, 108]]),
name="normalize_fmri")
gunzip = Node(Gunzip(), name="gunzip")
normalize_t1 = Node(Normalize12(
jobtype='estwrite',
tpm=template,
write_voxel_sizes=[iso_size, iso_size, iso_size],
write_bounding_box=[[-90, -126, -72], [90, 90, 108]]),
name="normalize_t1")
normalize_masks = Node(Normalize12(
jobtype='estwrite',
tpm=template,
write_voxel_sizes=[iso_size, iso_size, iso_size],
write_bounding_box=[[-90, -126, -72], [90, 90, 108]]),
name="normalize_masks")
# Threshold - Threshold WM probability image
threshold = Node(Threshold(thresh=0.5, args='-bin',
output_type='NIFTI_GZ'),
name="wm_mask_threshold")
# FLIRT - pre-alignment of functional images to anatomical images
coreg_pre = Node(FLIRT(dof=6, output_type='NIFTI_GZ'),
name="linear_warp_estimation")
# FLIRT - coregistration of functional images to anatomical images with BBR
coreg_bbr = Node(FLIRT(dof=6,
cost='bbr',
schedule=opj(os.getenv('FSLDIR'),
'etc/flirtsch/bbr.sch'),
output_type='NIFTI_GZ'),
name="nonlinear_warp_estimation")
# Apply coregistration warp to functional images
applywarp = Node(FLIRT(interp='spline',
apply_isoxfm=iso_size,
output_type='NIFTI'),
name="registration_fmri")
# Apply coregistration warp to mean file
applywarp_mean = Node(FLIRT(interp='spline',
apply_isoxfm=iso_size,
output_type='NIFTI_GZ'),
name="registration_mean_fmri")
# Infosource - a function free node to iterate over the list of subject names
infosource = Node(IdentityInterface(fields=['subject_id']),
name="infosource")
infosource.iterables = [('subject_id', subject_list)]
# SelectFiles - to grab the data (alternativ to DataGrabber)
anat_file = opj(structural_dir, '{subject_id}', 't1.nii')
func_file = opj('{subject_id}', 'fmri.nii')
templates = {'anat': anat_file, 'func': func_file}
selectfiles = Node(SelectFiles(templates, base_directory=base_dir),
name="selectfiles")
# Datasink - creates output folder for important outputs
datasink = Node(DataSink(base_directory=experiment_dir,
container=output_dir),
name="datasink")
# Create a coregistration workflow
coregwf = Workflow(name='coreg_fmri_to_t1')
coregwf.base_dir = opj(experiment_dir, working_dir)
# Create a preprocessing workflow
preproc = Workflow(name='preproc')
preproc.base_dir = opj(experiment_dir, working_dir)
# Connect all components of the coregistration workflow
coregwf.connect([
(bet_t1, n4bias, [('out_file', 'in_file')]),
(n4bias, segmentation, [('out_file', 'in_files')]),
(segmentation, threshold, [(('partial_volume_files', get_latest),
'in_file')]),
(n4bias, coreg_pre, [('out_file', 'reference')]),
(threshold, coreg_bbr, [('out_file', 'wm_seg')]),
(coreg_pre, coreg_bbr, [('out_matrix_file', 'in_matrix_file')]),
(coreg_bbr, applywarp, [('out_matrix_file', 'in_matrix_file')]),
(n4bias, applywarp, [('out_file', 'reference')]),
(coreg_bbr, applywarp_mean, [('out_matrix_file', 'in_matrix_file')]),
(n4bias, applywarp_mean, [('out_file', 'reference')]),
])
## Use the following DataSink output substitutions
substitutions = [('_subject_id_', 'sub-')]
# ('_fwhm_', 'fwhm-'),
# ('_roi', ''),
# ('_mcf', ''),
# ('_st', ''),
# ('_flirt', ''),
# ('.nii_mean_reg', '_mean'),
# ('.nii.par', '.par'),
# ]
#subjFolders = [('fwhm-%s/' % f, 'fwhm-%s_' % f) for f in fwhm]
#substitutions.extend(subjFolders)
datasink.inputs.substitutions = substitutions
# Connect all components of the preprocessing workflow
preproc.connect([
(infosource, selectfiles, [('subject_id', 'subject_id')]),
(selectfiles, extract, [('func', 'in_file')]),
(extract, mcflirt, [('roi_file', 'in_file')]),
(mcflirt, slicetimer, [('out_file', 'in_file')]),
(selectfiles, coregwf, [('anat', 'bet_t1.in_file'),
('anat', 'nonlinear_warp_estimation.reference')
]),
(mcflirt, coregwf, [('mean_img', 'linear_warp_estimation.in_file'),
('mean_img', 'nonlinear_warp_estimation.in_file'),
('mean_img', 'registration_mean_fmri.in_file')]),
(slicetimer, coregwf, [('slice_time_corrected_file',
'registration_fmri.in_file')]),
(coregwf, art, [('registration_fmri.out_file', 'realigned_files')]),
(mcflirt, art, [('par_file', 'realignment_parameters')]),
(art, art_remotion, [('outlier_files', 'outlier_files')]),
(coregwf, art_remotion, [('registration_fmri.out_file', 'in_file')]),
(coregwf, gunzip, [('n4bias.out_file', 'in_file')]),
(selectfiles, normalize_fmri, [('anat', 'image_to_align')]),
(art_remotion, normalize_fmri, [('out_file', 'apply_to_files')]),
(selectfiles, normalize_t1, [('anat', 'image_to_align')]),
(gunzip, normalize_t1, [('out_file', 'apply_to_files')]),
(selectfiles, normalize_masks, [('anat', 'image_to_align')]),
(coregwf, normalize_masks, [(('segmentation.partial_volume_files',
get_wm_csf), 'apply_to_files')]),
(normalize_fmri, smooth, [('normalized_files', 'in_files')]),
(smooth, extract_confounds_ws_csf, [('smoothed_files', 'in_file')]),
(normalize_masks, extract_confounds_ws_csf, [('normalized_files',
'list_mask')]),
(mcflirt, extract_confounds_ws_csf, [('par_file', 'file_concat')]),
#(smooth, extract_confounds_gs, [('smoothed_files', 'in_file')]),
#(normalize_t1, extract_confounds_gs, [(('normalized_files',change_to_list), 'list_mask')]),
#(extract_confounds_ws_csf, extract_confounds_gs, [('out_file', 'file_concat')]),
(smooth, signal_extraction, [('smoothed_files', 'in_file')]),
#(extract_confounds_gs, signal_extraction, [('out_file', 'confounds_file')]),
(extract_confounds_ws_csf, signal_extraction, [('out_file',
'confounds_file')]),
#(smooth, descomposition, [('smoothed_files', 'in_file')]),
#(extract_confounds_ws_csf, descomposition, [('out_file', 'confounds_file')]),
#(extract_confounds_gs, datasink, [('out_file', 'preprocessing.@confounds_with_gs')]),
(extract_confounds_ws_csf, datasink,
[('out_file', 'preprocessing.@confounds_without_gs')]),
(smooth, datasink, [('smoothed_files', 'preprocessing.@smoothed')]),
(normalize_fmri, datasink, [('normalized_files',
'preprocessing.@fmri_normalized')]),
(normalize_t1, datasink, [('normalized_files',
'preprocessing.@t1_normalized')]),
(normalize_masks, datasink, [('normalized_files',
'preprocessing.@masks_normalized')]),
(signal_extraction, datasink, [('time_series_out_file',
'preprocessing.@time_serie')]),
(signal_extraction, datasink, [('correlation_matrix_out_file',
'preprocessing.@correlation_matrix')]),
(signal_extraction, datasink,
[('fmri_cleaned_out_file', 'preprocessing.@fmri_cleaned_out_file')]),
#(descomposition, datasink, [('out_file', 'preprocessing.@descomposition')]),
#(descomposition, datasink, [('plot_files', 'preprocessing.@descomposition_plot_files')])
])
preproc.write_graph(graph2use='colored', format='png', simple_form=True)
preproc.run()
def main(paths, options_binary_string, ANAT, num_proc=7):
json_path = paths[0]
base_directory = paths[1]
motion_correction_bet_directory = paths[2]
parent_wf_directory = paths[3]
# functional_connectivity_directory=paths[4]
coreg_reg_directory = paths[5]
atlas_resize_reg_directory = paths[6]
subject_list = paths[7]
datasink_name = paths[8]
# fc_datasink_name=paths[9]
atlasPath = paths[10]
# brain_path=paths[11]
# mask_path=paths[12]
# atlas_path=paths[13]
# tr_path=paths[14]
# motion_params_path=paths[15]
# func2std_mat_path=paths[16]
# MNI3mm_path=paths[17]
# demographics_file_path = paths[18]
# phenotype_file_path = paths[19]
data_directory = paths[20]
number_of_subjects = len(subject_list)
print("Working with ", number_of_subjects, " subjects.")
# Create our own custom function - BIDSDataGrabber using a Function Interface.
# In[858]:
def get_nifti_filenames(subject_id, data_dir):
# Remember that all the necesary imports need to be INSIDE the function for the Function Interface to work!
from bids.grabbids import BIDSLayout
layout = BIDSLayout(data_dir)
run = 1
anat_file_path = [
f.filename for f in layout.get(
subject=subject_id, type='T1w', extensions=['nii', 'nii.gz'])
]
func_file_path = [
f.filename for f in layout.get(subject=subject_id,
type='bold',
run=run,
extensions=['nii', 'nii.gz'])
]
if len(anat_file_path) == 0:
return None, func_file_path[0] # No Anatomical files present
return anat_file_path[0], func_file_path[0]
BIDSDataGrabber = Node(Function(
function=get_nifti_filenames,
input_names=['subject_id', 'data_dir'],
output_names=['anat_file_path', 'func_file_path']),
name='BIDSDataGrabber')
# BIDSDataGrabber.iterables = [('subject_id',subject_list)]
BIDSDataGrabber.inputs.data_dir = data_directory
# ## Return TR
def get_TR(in_file):
from bids.grabbids import BIDSLayout
data_directory = '/home1/varunk/data/ABIDE1/RawDataBIDs'
layout = BIDSLayout(data_directory)
metadata = layout.get_metadata(path=in_file)
TR = metadata['RepetitionTime']
return TR
# ---------------- Added new Node to return TR and other slice timing correction params-------------------------------
def _getMetadata(in_file):
from bids.grabbids import BIDSLayout
import logging
logger = logging.getLogger(__name__)
logger.setLevel(logging.DEBUG)
# create a file handler
handler = logging.FileHandler('progress.log')
# add the handlers to the logger
logger.addHandler(handler)
interleaved = True
index_dir = False
data_directory = '/home1/varunk/data/ABIDE1/RawDataBIDs'
layout = BIDSLayout(data_directory)
metadata = layout.get_metadata(path=in_file)
print(metadata)
logger.info('Extracting Meta Data of file: %s', in_file)
try:
tr = metadata['RepetitionTime']
except KeyError:
print(
'Key RepetitionTime not found in task-rest_bold.json so using a default of 2.0 '
)
tr = 2
logger.error(
'Key RepetitionTime not found in task-rest_bold.json for file %s so using a default of 2.0 ',
in_file)
try:
slice_order = metadata['SliceAcquisitionOrder']
except KeyError:
print(
'Key SliceAcquisitionOrder not found in task-rest_bold.json so using a default of interleaved ascending '
)
logger.error(
'Key SliceAcquisitionOrder not found in task-rest_bold.json for file %s so using a default of interleaved ascending',
in_file)
return tr, index_dir, interleaved
if slice_order.split(' ')[0] == 'Sequential':
interleaved = False
if slice_order.split(' ')[1] == 'Descending':
index_dir = True
return tr, index_dir, interleaved
getMetadata = Node(Function(
function=_getMetadata,
input_names=['in_file'],
output_names=['tr', 'index_dir', 'interleaved']),
name='getMetadata')
# ### Skipping 4 starting scans
# Extract ROI for skipping first 4 scans of the functional data
# > **Arguments:**
# t_min: (corresponds to time dimension) Denotes the starting time of the inclusion
# t_size: Denotes the number of scans to include
#
# The logic behind skipping 4 initial scans is to take scans after the subject has stabalized in the scanner.
# In[863]:
# ExtractROI - skip dummy scans
extract = Node(ExtractROI(t_min=4, t_size=-1),
output_type='NIFTI',
name="extract")
# ### Slice time correction
# Created a Node that does slice time correction
# > **Arguments**:
# index_dir=False -> Slices were taken bottom to top i.e. in ascending order
# interleaved=True means odd slices were acquired first and then even slices [or vice versa(Not sure)]
slicetimer = Node(SliceTimer(output_type='NIFTI'), name="slicetimer")
# ### Motion Correction
# Motion correction is done using fsl's mcflirt. It alligns all the volumes of a functional scan to each other
# MCFLIRT - motion correction
mcflirt = Node(MCFLIRT(mean_vol=True, save_plots=True,
output_type='NIFTI'),
name="mcflirt")
# Just a dummy node to transfer the output of Mcflirt to the next workflow. Needed if we didnt want to use the Mcflirt
from_mcflirt = Node(IdentityInterface(fields=['in_file']),
name="from_mcflirt")
# ### Skull striping
# I used fsl's BET
# In[868]:
skullStrip = Node(BET(mask=False, frac=0.3, robust=True),
name='skullStrip') #
# *Note*: Do not include special characters in ```name``` field above coz then wf.writegraph will cause issues
# ## Resample
# I needed to resample the anatomical file from 1mm to 3mm. Because registering a 1mm file was taking a huge amount of time.
#
# In[872]:
# Resample - resample anatomy to 3x3x3 voxel resolution
resample_mni = Node(
Resample(
voxel_size=(3, 3, 3),
resample_mode='Cu', # cubic interpolation
outputtype='NIFTI'),
name="resample_mni")
resample_anat = Node(
Resample(
voxel_size=(3, 3, 3),
resample_mode='Cu', # cubic interpolation
outputtype='NIFTI'),
name="resample_anat")
# In[873]:
resample_atlas = Node(
Resample(
voxel_size=(3, 3, 3),
resample_mode='NN', # cubic interpolation
outputtype='NIFTI'),
name="resample_atlas")
resample_atlas.inputs.in_file = atlasPath
# # Matrix operations
# ### For concatenating the transformation matrices
concat_xform = Node(ConvertXFM(concat_xfm=True), name='concat_xform')
# Node to calculate the inverse of func2std matrix
inv_mat = Node(ConvertXFM(invert_xfm=True), name='inv_mat')
# ## Extracting the mean brain
meanfunc = Node(interface=ImageMaths(op_string='-Tmean', suffix='_mean'),
name='meanfunc')
meanfuncmask = Node(interface=BET(mask=True, no_output=True, frac=0.3),
name='meanfuncmask')
# ## Apply Mask
# Does BET (masking) on the whole func scan [Not using this, creates bug for join node]
maskfunc = Node(interface=ImageMaths(suffix='_bet', op_string='-mas'),
name='maskfunc')
# Does BET (masking) on the mean func scan
maskfunc4mean = Node(interface=ImageMaths(suffix='_bet', op_string='-mas'),
name='maskfunc4mean')
# ## Datasink
# I needed to define the structure of what files are saved and where.
# Create DataSink object
dataSink = Node(DataSink(), name='datasink')
# Name of the output folder
dataSink.inputs.base_directory = opj(base_directory, datasink_name)
# Define substitution strings so that the data is similar to BIDS
substitutions = [
('_subject_id_', 'sub-'), ('_resample_brain_flirt.nii_brain', ''),
('_roi_st_mcf_flirt.nii_brain_flirt', ''),
('task-rest_run-1_bold_roi_st_mcf.nii', 'motion_params'),
('T1w_resample_brain_flirt_sub-0050002_task-rest_run-1_bold_roi_st_mcf_mean_bet_flirt',
'fun2std')
]
# Feed the substitution strings to the DataSink node
dataSink.inputs.substitutions = substitutions
# ### Apply Mask to functional data
# Mean file of the motion corrected functional scan is sent to
# skullStrip to get just the brain and the mask_image.
# Mask_image is just a binary file (containing 1 where brain is present and 0 where it isn't).
# After getting the mask_image form skullStrip, apply that mask to aligned
# functional image to extract its brain and remove the skull
# In[889]:
# Function
# in_file: The file on which you want to apply mask
# in_file2 = mask_file: The mask you want to use. Make sure that mask_file has same size as in_file
# out_file : Result of applying mask in in_file -> Gives the path of the output file
def applyMask_func(in_file, in_file2):
import numpy as np
import nibabel as nib
import os
from os.path import join as opj
# convert from unicode to string : u'/tmp/tmp8daO2Q/..' -> '/tmp/tmp8daO2Q/..' i.e. removes the prefix 'u'
mask_file = in_file2
brain_data = nib.load(in_file)
mask_data = nib.load(mask_file)
brain = brain_data.get_data().astype('float32')
mask = mask_data.get_data()
# applying mask by multiplying elementwise to the binary mask
if len(brain.shape) == 3: # Anat file
brain = np.multiply(brain, mask)
elif len(brain.shape) > 3: # Functional File
for t in range(brain.shape[-1]):
brain[:, :, :, t] = np.multiply(brain[:, :, :, t], mask)
else:
pass
# Saving the brain file
path = os.getcwd()
in_file_split_list = in_file.split('/')
in_file_name = in_file_split_list[-1]
out_file = in_file_name + '_brain.nii.gz' # changing name
brain_with_header = nib.Nifti1Image(brain,
affine=brain_data.affine,
header=brain_data.header)
nib.save(brain_with_header, out_file)
out_file = opj(path, out_file)
out_file2 = in_file2
return out_file, out_file2
# #### Things learnt:
# 1. I found out that whenever a node is being executed, it becomes the current directory and whatever file you create now, will be stored here.
# 2. #from IPython.core.debugger import Tracer; Tracer()() # Debugger doesnt work in nipype
# Wrap the above function inside a Node
# In[890]:
applyMask = Node(Function(function=applyMask_func,
input_names=['in_file', 'in_file2'],
output_names=['out_file', 'out_file2']),
name='applyMask')
# ### Some nodes needed for Co-registration and Normalization
# Node for getting the xformation matrix
func2anat_reg = Node(FLIRT(output_type='NIFTI'), name="func2anat_reg")
# Node for applying xformation matrix to functional data
func2std_xform = Node(FLIRT(output_type='NIFTI', apply_xfm=True),
name="func2std_xform")
# Node for applying xformation matrix to functional data
std2func_xform = Node(FLIRT(output_type='NIFTI',
apply_xfm=True,
interp='nearestneighbour'),
name="std2func_xform")
# Node for Normalizing/Standardizing the anatomical and getting the xformation matrix
anat2std_reg = Node(FLIRT(output_type='NIFTI'), name="anat2std_reg")
# I wanted to use the MNI file as input to the workflow so I created an Identity
# Node that reads the MNI file path and outputs the same MNI file path.
# Then I connected this node to whereever it was needed.
MNI152_2mm = Node(IdentityInterface(fields=['standard_file', 'mask_file']),
name="MNI152_2mm")
# Set the mask_file and standard_file input in the Node. This setting sets the input mask_file permanently.
MNI152_2mm.inputs.mask_file = os.path.expandvars(
'$FSLDIR/data/standard/MNI152_T1_2mm_brain_mask.nii.gz')
MNI152_2mm.inputs.standard_file = os.path.expandvars(
'$FSLDIR/data/standard/MNI152_T1_2mm_brain.nii.gz')
# MNI152_2mm.inputs.mask_file = '/usr/share/fsl/5.0/data/standard/MNI152_T1_2mm_brain_mask.nii.gz'
# MNI152_2mm.inputs.standard_file = '/usr/share/fsl/5.0/data/standard/MNI152_T1_2mm_brain.nii.gz'
# ## Band Pass Filtering
# Let's do a band pass filtering on the data using the code from https://neurostars.org/t/bandpass-filtering-different-outputs-from-fsl-and-nipype-custom-function/824/2
### AFNI
bandpass = Node(afni.Bandpass(highpass=0.008,
lowpass=0.08,
despike=False,
no_detrend=True,
notrans=True,
outputtype='NIFTI_GZ'),
name='bandpass')
# ### Following is a Join Node that collects the preprocessed file paths and saves them in a file
# In[902]:
def save_file_list_function_in_brain(in_brain):
import numpy as np
import os
from os.path import join as opj
file_list = np.asarray(in_brain)
print('######################## File List ######################: \n',
file_list)
np.save('brain_file_list', file_list)
file_name = 'brain_file_list.npy'
out_brain = opj(os.getcwd(), file_name) # path
return out_brain
def save_file_list_function_in_mask(in_mask):
import numpy as np
import os
from os.path import join as opj
file_list2 = np.asarray(in_mask)
print('######################## File List ######################: \n',
file_list2)
np.save('mask_file_list', file_list2)
file_name2 = 'mask_file_list.npy'
out_mask = opj(os.getcwd(), file_name2) # path
return out_mask
def save_file_list_function_in_motion_params(in_motion_params):
import numpy as np
import os
from os.path import join as opj
file_list3 = np.asarray(in_motion_params)
print('######################## File List ######################: \n',
file_list3)
np.save('motion_params_file_list', file_list3)
file_name3 = 'motion_params_file_list.npy'
out_motion_params = opj(os.getcwd(), file_name3) # path
return out_motion_params
def save_file_list_function_in_motion_outliers(in_motion_outliers):
import numpy as np
import os
from os.path import join as opj
file_list4 = np.asarray(in_motion_outliers)
print('######################## File List ######################: \n',
file_list4)
np.save('motion_outliers_file_list', file_list4)
file_name4 = 'motion_outliers_file_list.npy'
out_motion_outliers = opj(os.getcwd(), file_name4) # path
return out_motion_outliers
def save_file_list_function_in_joint_xformation_matrix(
in_joint_xformation_matrix):
import numpy as np
import os
from os.path import join as opj
file_list5 = np.asarray(in_joint_xformation_matrix)
print('######################## File List ######################: \n',
file_list5)
np.save('joint_xformation_matrix_file_list', file_list5)
file_name5 = 'joint_xformation_matrix_file_list.npy'
out_joint_xformation_matrix = opj(os.getcwd(), file_name5) # path
return out_joint_xformation_matrix
def save_file_list_function_in_tr(in_tr):
import numpy as np
import os
from os.path import join as opj
tr_list = np.asarray(in_tr)
print('######################## TR List ######################: \n',
tr_list)
np.save('tr_list', tr_list)
file_name6 = 'tr_list.npy'
out_tr = opj(os.getcwd(), file_name6) # path
return out_tr
def save_file_list_function_in_atlas(in_atlas):
import numpy as np
import os
from os.path import join as opj
file_list7 = np.asarray(in_atlas)
print('######################## File List ######################: \n',
file_list7)
np.save('atlas_file_list', file_list7)
file_name7 = 'atlas_file_list.npy'
out_atlas = opj(os.getcwd(), file_name7) # path
return out_atlas
save_file_list_in_brain = JoinNode(Function(
function=save_file_list_function_in_brain,
input_names=['in_brain'],
output_names=['out_brain']),
joinsource="infosource",
joinfield=['in_brain'],
name="save_file_list_in_brain")
save_file_list_in_mask = JoinNode(Function(
function=save_file_list_function_in_mask,
input_names=['in_mask'],
output_names=['out_mask']),
joinsource="infosource",
joinfield=['in_mask'],
name="save_file_list_in_mask")
save_file_list_in_motion_outliers = JoinNode(
Function(function=save_file_list_function_in_motion_outliers,
input_names=['in_motion_outliers'],
output_names=['out_motion_outliers']),
joinsource="infosource",
joinfield=['in_motion_outliers'],
name="save_file_list_in_motion_outliers")
save_file_list_in_motion_params = JoinNode(
Function(function=save_file_list_function_in_motion_params,
input_names=['in_motion_params'],
output_names=['out_motion_params']),
joinsource="infosource",
joinfield=['in_motion_params'],
name="save_file_list_in_motion_params")
save_file_list_in_joint_xformation_matrix = JoinNode(
Function(function=save_file_list_function_in_joint_xformation_matrix,
input_names=['in_joint_xformation_matrix'],
output_names=['out_joint_xformation_matrix']),
joinsource="infosource",
joinfield=['in_joint_xformation_matrix'],
name="save_file_list_in_joint_xformation_matrix")
save_file_list_in_tr = JoinNode(Function(
function=save_file_list_function_in_tr,
input_names=['in_tr'],
output_names=['out_tr']),
joinsource="infosource",
joinfield=['in_tr'],
name="save_file_list_in_tr")
save_file_list_in_atlas = JoinNode(Function(
function=save_file_list_function_in_atlas,
input_names=['in_atlas'],
output_names=['out_atlas']),
joinsource="infosource",
joinfield=['in_atlas'],
name="save_file_list_in_atlas")
# save_file_list = JoinNode(Function(function=save_file_list_function, input_names=['in_brain', 'in_mask', 'in_motion_params','in_motion_outliers','in_joint_xformation_matrix', 'in_tr', 'in_atlas'],
# output_names=['out_brain','out_mask','out_motion_params','out_motion_outliers','out_joint_xformation_matrix','out_tr', 'out_atlas']),
# joinsource="infosource",
# joinfield=['in_brain', 'in_mask', 'in_motion_params','in_motion_outliers','in_joint_xformation_matrix','in_tr', 'in_atlas'],
# name="save_file_list")
# def save_file_list_function(in_brain, in_mask, in_motion_params, in_motion_outliers, in_joint_xformation_matrix, in_tr, in_atlas):
# # Imports
# import numpy as np
# import os
# from os.path import join as opj
#
#
# file_list = np.asarray(in_brain)
# print('######################## File List ######################: \n',file_list)
#
# np.save('brain_file_list',file_list)
# file_name = 'brain_file_list.npy'
# out_brain = opj(os.getcwd(),file_name) # path
#
#
# file_list2 = np.asarray(in_mask)
# print('######################## File List ######################: \n',file_list2)
#
# np.save('mask_file_list',file_list2)
# file_name2 = 'mask_file_list.npy'
# out_mask = opj(os.getcwd(),file_name2) # path
#
#
# file_list3 = np.asarray(in_motion_params)
# print('######################## File List ######################: \n',file_list3)
#
# np.save('motion_params_file_list',file_list3)
# file_name3 = 'motion_params_file_list.npy'
# out_motion_params = opj(os.getcwd(),file_name3) # path
#
#
# file_list4 = np.asarray(in_motion_outliers)
# print('######################## File List ######################: \n',file_list4)
#
# np.save('motion_outliers_file_list',file_list4)
# file_name4 = 'motion_outliers_file_list.npy'
# out_motion_outliers = opj(os.getcwd(),file_name4) # path
#
#
# file_list5 = np.asarray(in_joint_xformation_matrix)
# print('######################## File List ######################: \n',file_list5)
#
# np.save('joint_xformation_matrix_file_list',file_list5)
# file_name5 = 'joint_xformation_matrix_file_list.npy'
# out_joint_xformation_matrix = opj(os.getcwd(),file_name5) # path
#
# tr_list = np.asarray(in_tr)
# print('######################## TR List ######################: \n',tr_list)
#
# np.save('tr_list',tr_list)
# file_name6 = 'tr_list.npy'
# out_tr = opj(os.getcwd(),file_name6) # path
#
#
# file_list7 = np.asarray(in_atlas)
# print('######################## File List ######################: \n',file_list7)
#
# np.save('atlas_file_list',file_list7)
# file_name7 = 'atlas_file_list.npy'
# out_atlas = opj(os.getcwd(),file_name7) # path
#
#
#
#
# return out_brain, out_mask, out_motion_params, out_motion_outliers, out_joint_xformation_matrix, out_tr , out_atlas
#
#
#
# save_file_list = JoinNode(Function(function=save_file_list_function, input_names=['in_brain', 'in_mask', 'in_motion_params','in_motion_outliers','in_joint_xformation_matrix', 'in_tr', 'in_atlas'],
# output_names=['out_brain','out_mask','out_motion_params','out_motion_outliers','out_joint_xformation_matrix','out_tr', 'out_atlas']),
# joinsource="infosource",
# joinfield=['in_brain', 'in_mask', 'in_motion_params','in_motion_outliers','in_joint_xformation_matrix','in_tr', 'in_atlas'],
# name="save_file_list")
# ### Motion outliers
motionOutliers = Node(MotionOutliers(no_motion_correction=False,
metric='fd',
out_metric_plot='fd_plot.png',
out_metric_values='fd_raw.txt'),
name='motionOutliers')
# ## Workflow for atlas registration from std to functional
wf_atlas_resize_reg = Workflow(name=atlas_resize_reg_directory)
wf_atlas_resize_reg.connect([
# Apply the inverse matrix to the 3mm Atlas to transform it to func space
(maskfunc4mean, std2func_xform, [(('out_file', 'reference'))]),
(resample_atlas, std2func_xform, [('out_file', 'in_file')]),
# Now, applying the inverse matrix
(inv_mat, std2func_xform, [('out_file', 'in_matrix_file')]
), # output: Atlas in func space
(std2func_xform, save_file_list_in_atlas, [('out_file', 'in_atlas')]),
# ---------------------------Save the required files --------------------------------------------
(save_file_list_in_motion_params, dataSink,
[('out_motion_params', 'motion_params_paths.@out_motion_params')]),
(save_file_list_in_motion_outliers, dataSink,
[('out_motion_outliers', 'motion_outliers_paths.@out_motion_outliers')
]),
(save_file_list_in_brain, dataSink,
[('out_brain', 'preprocessed_brain_paths.@out_brain')]),
(save_file_list_in_mask, dataSink,
[('out_mask', 'preprocessed_mask_paths.@out_mask')]),
(save_file_list_in_joint_xformation_matrix, dataSink,
[('out_joint_xformation_matrix',
'joint_xformation_matrix_paths.@out_joint_xformation_matrix')]),
(save_file_list_in_tr, dataSink, [('out_tr', 'tr_paths.@out_tr')]),
(save_file_list_in_atlas, dataSink, [('out_atlas',
'atlas_paths.@out_atlas')])
])
# In[909]:
wf_coreg_reg = Workflow(name=coreg_reg_directory)
# wf_coreg_reg.base_dir = base_directory
# Dir where all the outputs will be stored(inside coregistrationPipeline folder).
if ANAT == 1:
wf_coreg_reg.connect(BIDSDataGrabber, 'anat_file_path', skullStrip,
'in_file') # Resampled the anat file to 3mm
wf_coreg_reg.connect(skullStrip, 'out_file', resample_anat, 'in_file')
wf_coreg_reg.connect(
resample_anat, 'out_file', func2anat_reg, 'reference'
) # Make the resampled file as reference in func2anat_reg
# Sec 1. The above 3 steps registers the mean image to resampled anat image and
# calculates the xformation matrix .. I hope the xformation matrix will be saved
wf_coreg_reg.connect(MNI152_2mm, 'standard_file', resample_mni,
'in_file')
wf_coreg_reg.connect(resample_mni, 'out_file', anat2std_reg,
'reference')
wf_coreg_reg.connect(resample_anat, 'out_file', anat2std_reg,
'in_file')
# Calculates the Xformationmatrix from anat3mm to MNI 3mm
# We can get those matrices by refering to func2anat_reg.outputs.out_matrix_file and similarly for anat2std_reg
wf_coreg_reg.connect(func2anat_reg, 'out_matrix_file', concat_xform,
'in_file')
wf_coreg_reg.connect(anat2std_reg, 'out_matrix_file', concat_xform,
'in_file2')
wf_coreg_reg.connect(concat_xform, 'out_file', dataSink,
'tranformation_matrix_fun2std.@out_file')
wf_coreg_reg.connect(concat_xform, 'out_file',
save_file_list_in_joint_xformation_matrix,
'in_joint_xformation_matrix')
# Now inverse the func2std MAT to std2func
wf_coreg_reg.connect(concat_xform, 'out_file', wf_atlas_resize_reg,
'inv_mat.in_file')
# ------------------------------------------------------------------------------------------------------------------------------
# Registration of Functional to MNI 3mm space w/o using anatomical
if ANAT == 0:
print('Not using Anatomical high resoulution files')
wf_coreg_reg.connect(MNI152_2mm, 'standard_file', resample_mni,
'in_file')
wf_coreg_reg.connect(
resample_mni, 'out_file', func2anat_reg, 'reference'
) # Make the resampled file as reference in func2anat_reg
wf_coreg_reg.connect(func2anat_reg, 'out_matrix_file', dataSink,
'tranformation_matrix_fun2std.@out_file')
wf_coreg_reg.connect(func2anat_reg, 'out_matrix_file',
save_file_list_in_joint_xformation_matrix,
'in_joint_xformation_matrix')
# Now inverse the func2std MAT to std2func
wf_coreg_reg.connect(func2anat_reg, 'out_matrix_file',
wf_atlas_resize_reg, 'inv_mat.in_file')
# ## Co-Registration, Normalization and Bandpass Workflow
# 1. Co-registration means alligning the func to anat
# 2. Normalization means aligning func/anat to standard
# 3. Applied band pass filtering in range - highpass=0.008, lowpass=0.08
# In[910]:
wf_motion_correction_bet = Workflow(name=motion_correction_bet_directory)
# wf_motion_correction_bet.base_dir = base_directory
wf_motion_correction_bet.connect([
(from_mcflirt, meanfunc, [('in_file', 'in_file')]),
(meanfunc, meanfuncmask, [('out_file', 'in_file')]),
(from_mcflirt, applyMask, [('in_file', 'in_file')]), # 1
(meanfuncmask, applyMask, [
('mask_file', 'in_file2')
]), # 2 output: 1&2, BET on coregistered fmri scan
(meanfunc, maskfunc4mean, [('out_file', 'in_file')]), # 3
(meanfuncmask, maskfunc4mean,
[('mask_file', 'in_file2')]), # 4 output: 3&4, BET on mean func scan
(applyMask, save_file_list_in_brain, [('out_file', 'in_brain')]),
(applyMask, save_file_list_in_mask, [('out_file2', 'in_mask')]),
(maskfunc4mean, wf_coreg_reg, [('out_file', 'func2anat_reg.in_file')])
])
infosource = Node(IdentityInterface(fields=['subject_id']),
name="infosource")
infosource.iterables = [('subject_id', subject_list)]
# Create the workflow
wf = Workflow(name=parent_wf_directory)
# base_dir = opj(s,'result')
wf.base_dir = base_directory # Dir where all the outputs will be stored(inside BETFlow folder).
# wf.connect([ (infosource, BIDSDataGrabber, [('subject_id','subject_id')]),
# (BIDSDataGrabber, extract, [('func_file_path','in_file')]),
#
# (BIDSDataGrabber,getMetadata, [('func_file_path','in_file')]),
#
# (getMetadata,slicetimer, [('tr','time_repetition')]),
#
#
# (getMetadata,slicetimer, [('index_dir','index_dir')]),
#
# (getMetadata,slicetimer, [('interleaved','interleaved')]),
#
# (getMetadata,save_file_list_in_tr, [('tr','in_tr')]),
#
# (extract,slicetimer,[('roi_file','in_file')]),
#
# (slicetimer, mcflirt,[('slice_time_corrected_file','in_file')])
# (mcflirt,dataSink,[('par_file','motion_params.@par_file')]), # saves the motion parameters calculated before
#
# (mcflirt,save_file_list_in_motion_params,[('par_file','in_motion_params')]),
#
# (mcflirt,wf_motion_correction_bet,[('out_file','from_mcflirt.in_file')])
# ])
# # Run it in parallel
# wf.run('MultiProc', plugin_args={'n_procs': num_proc})
#
#
#
# # Visualize the detailed graph
# # from IPython.display import Image
# wf.write_graph(graph2use='flat', format='png', simple_form=True)
# Options:
# discard 4 Volumes (extract), slicetimer, mcflirt
print('Preprocessing Options:')
print('Skipping 4 dummy volumes - ', options_binary_string[0])
print('Slicetiming correction - ', options_binary_string[1])
print('Finding Motion Outliers - ', options_binary_string[2])
print('Doing Motion Correction - ', options_binary_string[3])
# ANAT = 0
nodes = [extract, slicetimer, motionOutliers, mcflirt]
wf.connect(infosource, 'subject_id', BIDSDataGrabber, 'subject_id')
wf.connect(BIDSDataGrabber, 'func_file_path', getMetadata, 'in_file')
wf.connect(getMetadata, 'tr', save_file_list_in_tr, 'in_tr')
old_node = BIDSDataGrabber
old_node_output = 'func_file_path'
for idx, include in enumerate(options_binary_string):
if old_node == extract:
old_node_output = 'roi_file'
elif old_node == slicetimer:
old_node_output = 'slice_time_corrected_file'
# elif old_node == mcflirt:
# old_node_output = 'out_file'
if int(include):
new_node = nodes[idx]
if new_node == slicetimer:
wf.connect(getMetadata, 'tr', slicetimer, 'time_repetition')
wf.connect(getMetadata, 'index_dir', slicetimer, 'index_dir')
wf.connect(getMetadata, 'interleaved', slicetimer,
'interleaved')
new_node_input = 'in_file'
elif new_node == extract:
new_node_input = 'in_file'
elif new_node == mcflirt:
new_node_input = 'in_file'
wf.connect(mcflirt, 'par_file', dataSink,
'motion_params.@par_file'
) # saves the motion parameters calculated before
wf.connect(mcflirt, 'par_file',
save_file_list_in_motion_params, 'in_motion_params')
wf.connect(mcflirt, 'out_file', wf_motion_correction_bet,
'from_mcflirt.in_file')
elif new_node == motionOutliers:
wf.connect(meanfuncmask, 'mask_file', motionOutliers, 'mask')
wf.connect(motionOutliers, 'out_file', dataSink,
'motionOutliers.@out_file')
wf.connect(motionOutliers, 'out_metric_plot', dataSink,
'motionOutliers.@out_metric_plot')
wf.connect(motionOutliers, 'out_metric_values', dataSink,
'motionOutliers.@out_metric_values')
wf.connect(motionOutliers, 'out_file',
save_file_list_in_motion_outliers,
'in_motion_outliers')
new_node_input = 'in_file'
wf.connect(old_node, old_node_output, new_node, new_node_input)
continue
wf.connect(old_node, old_node_output, new_node, new_node_input)
old_node = new_node
else:
if idx == 3:
# new_node = from_mcflirt
# new_node_input = 'from_mcflirt.in_file'
wf.connect(old_node, old_node_output, wf_motion_correction_bet,
'from_mcflirt.in_file')
# old_node = new_node
TEMP_DIR_FOR_STORAGE = opj(base_directory, 'crash_files')
wf.config = {"execution": {"crashdump_dir": TEMP_DIR_FOR_STORAGE}}
# Visualize the detailed graph
# from IPython.display import Image
wf.write_graph(graph2use='flat', format='png', simple_form=True)
# Run it in parallel
wf.run('MultiProc', plugin_args={'n_procs': num_proc})
def run(self):
matlab_cmd = self.paths['spm_path'] + ' ' + self.paths[
'mcr_path'] + '/ script'
spm.SPMCommand.set_mlab_paths(matlab_cmd=matlab_cmd, use_mcr=True)
print(matlab_cmd)
print('SPM version: ' + str(spm.SPMCommand().version))
experiment_dir = opj(self.paths['input_path'], 'output/')
output_dir = 'datasink'
working_dir = 'workingdir'
subject_list = self.subject_list
# list of subject identifiers
fwhm = self.parameters[
'fwhm'] # Smoothing widths to apply (Gaussian kernel size)
tr = self.parameters['tr'] # Repetition time
init_volume = self.parameters[
'init_volume'] # Firts volumen identification which will use in the pipeline
iso_size = self.parameters[
'iso_size'] # Isometric resample of functional images to voxel size (in mm)
low_pass = self.parameters['low_pass']
high_pass = self.parameters['high_pass']
t1_relative_path = self.paths['t1_relative_path']
fmri_relative_path = self.paths['fmri_relative_path']
# ExtractROI - skip dummy scans
extract = Node(ExtractROI(t_min=init_volume,
t_size=-1,
output_type='NIFTI'),
name="extract") #FSL
# MCFLIRT - motion correction
mcflirt = Node(MCFLIRT(mean_vol=True,
save_plots=True,
output_type='NIFTI'),
name="motion_correction") #FSL
# SliceTimer - correct for slice wise acquisition
slicetimer = Node(SliceTimer(index_dir=False,
interleaved=True,
output_type='NIFTI',
time_repetition=tr),
name="slice_timing_correction") #FSL
# Smooth - image smoothing
denoise = Node(Denoise(), name="denoising") #Interfaces with dipy
smooth = Node(spm.Smooth(fwhm=fwhm), name="smooth") #SPM
n4bias = Node(N4Bias(out_file='t1_n4bias.nii.gz'),
name='n4bias') #Interface with SimpleITK
descomposition = Node(Descomposition(n_components=20,
low_pass=0.1,
high_pass=0.01,
tr=tr),
name='descomposition') #Interface with nilearn
# Artifact Detection - determines outliers in functional images
art = Node(ArtifactDetect(norm_threshold=2,
zintensity_threshold=3,
mask_type='spm_global',
parameter_source='FSL',
use_differences=[True, False],
plot_type='svg'),
name="artifact_detection") #Rapidart
extract_confounds_ws_csf = Node(
ExtractConfounds(out_file='ev_without_gs.csv'),
name='extract_confounds_ws_csf') #Interfece
extract_confounds_gs = Node(ExtractConfounds(out_file='ev_with_gs.csv',
delimiter=','),
name='extract_confounds_global_signal')
signal_extraction = Node(SignalExtraction(
time_series_out_file='time_series.csv',
correlation_matrix_out_file='correlation_matrix.png',
labels_parcellation_path=self.paths['labels_parcellation_path'],
mask_mni_path=self.paths['mask_mni_path'],
tr=tr,
low_pass=low_pass,
high_pass=high_pass,
plot=False),
name='signal_extraction')
signal_extraction.iterables = [('image_parcellation_path',
self.paths['image_parcellation_path'])]
art_remotion = Node(
ArtifacRemotion(out_file='fmri_art_removed.nii'),
name='artifact_remotion') #This interface requires implementation
# BET - Skullstrip anatomical anf funtional images
bet_t1 = Node(BET(frac=0.5,
robust=True,
mask=True,
output_type='NIFTI_GZ'),
name="bet_t1") #FSL
# FAST - Image Segmentation
segmentation = Node(FAST(output_type='NIFTI'),
name="segmentation") #FSL
# Normalize - normalizes functional and structural images to the MNI template
normalize_fmri = Node(Normalize12(
jobtype='estwrite',
tpm=self.paths['template_spm_path'],
write_voxel_sizes=[iso_size, iso_size, iso_size],
write_bounding_box=[[-90, -126, -72], [90, 90, 108]]),
name="normalize_fmri") #SPM
gunzip = Node(Gunzip(), name="gunzip")
normalize_t1 = Node(Normalize12(
jobtype='estwrite',
tpm=self.paths['template_spm_path'],
write_voxel_sizes=[iso_size, iso_size, iso_size],
write_bounding_box=[[-90, -126, -72], [90, 90, 108]]),
name="normalize_t1")
normalize_masks = Node(Normalize12(
jobtype='estwrite',
tpm=self.paths['template_spm_path'],
write_voxel_sizes=[iso_size, iso_size, iso_size],
write_bounding_box=[[-90, -126, -72], [90, 90, 108]]),
name="normalize_masks")
# Threshold - Threshold WM probability image
threshold = Node(Threshold(thresh=0.5,
args='-bin',
output_type='NIFTI_GZ'),
name="wm_mask_threshold")
# FLIRT - pre-alignment of functional images to anatomical images
coreg_pre = Node(FLIRT(dof=6, output_type='NIFTI_GZ'),
name="linear_warp_estimation")
# FLIRT - coregistration of functional images to anatomical images with BBR
coreg_bbr = Node(FLIRT(dof=6,
cost='bbr',
schedule=opj(os.getenv('FSLDIR'),
'etc/flirtsch/bbr.sch'),
output_type='NIFTI_GZ'),
name="nonlinear_warp_estimation")
# Apply coregistration warp to functional images
applywarp = Node(FLIRT(interp='spline',
apply_isoxfm=iso_size,
output_type='NIFTI'),
name="registration_fmri")
# Apply coregistration warp to mean file
applywarp_mean = Node(FLIRT(interp='spline',
apply_isoxfm=iso_size,
output_type='NIFTI_GZ'),
name="registration_mean_fmri")
# Infosource - a function free node to iterate over the list of subject names
infosource = Node(IdentityInterface(fields=['subject_id']),
name="infosource")
infosource.iterables = [('subject_id', subject_list)]
# SelectFiles - to grab the data (alternativ to DataGrabber)
anat_file = opj('{subject_id}', t1_relative_path)
func_file = opj('{subject_id}', fmri_relative_path)
#anat_file = opj('{subject_id}/anat/', 'data.nii')
#func_file = opj('{subject_id}/func/', 'data.nii')
templates = {'anat': anat_file, 'func': func_file}
selectfiles = Node(SelectFiles(
templates, base_directory=self.paths['input_path']),
name="selectfiles")
# Datasink - creates output folder for important outputs
datasink = Node(DataSink(base_directory=experiment_dir,
container=output_dir),
name="datasink")
# Create a coregistration workflow
coregwf = Workflow(name='coreg_fmri_to_t1')
coregwf.base_dir = opj(experiment_dir, working_dir)
# Create a preprocessing workflow
preproc = Workflow(name='preproc')
preproc.base_dir = opj(experiment_dir, working_dir)
# Connect all components of the coregistration workflow
coregwf.connect([
(bet_t1, n4bias, [('out_file', 'in_file')]),
(n4bias, segmentation, [('out_file', 'in_files')]),
(segmentation, threshold, [(('partial_volume_files', get_latest),
'in_file')]),
(n4bias, coreg_pre, [('out_file', 'reference')]),
(threshold, coreg_bbr, [('out_file', 'wm_seg')]),
(coreg_pre, coreg_bbr, [('out_matrix_file', 'in_matrix_file')]),
(coreg_bbr, applywarp, [('out_matrix_file', 'in_matrix_file')]),
(n4bias, applywarp, [('out_file', 'reference')]),
(coreg_bbr, applywarp_mean, [('out_matrix_file', 'in_matrix_file')
]),
(n4bias, applywarp_mean, [('out_file', 'reference')]),
])
## Use the following DataSink output substitutions
substitutions = [('_subject_id_', 'sub-')]
# ('_fwhm_', 'fwhm-'),
# ('_roi', ''),
# ('_mcf', ''),
# ('_st', ''),
# ('_flirt', ''),
# ('.nii_mean_reg', '_mean'),
# ('.nii.par', '.par'),
# ]
# subjFolders = [('fwhm-%s/' % f, 'fwhm-%s_' % f) for f in fwhm]
# substitutions.extend(subjFolders)
datasink.inputs.substitutions = substitutions
# Connect all components of the preprocessing workflow
preproc.connect([
(infosource, selectfiles, [('subject_id', 'subject_id')]),
(selectfiles, extract, [('func', 'in_file')]),
(extract, mcflirt, [('roi_file', 'in_file')]),
(mcflirt, slicetimer, [('out_file', 'in_file')]),
(selectfiles, denoise, [('anat', 'in_file')]),
(denoise, coregwf, [('out_file', 'bet_t1.in_file'),
('out_file',
'nonlinear_warp_estimation.reference')]),
(mcflirt, coregwf,
[('mean_img', 'linear_warp_estimation.in_file'),
('mean_img', 'nonlinear_warp_estimation.in_file'),
('mean_img', 'registration_mean_fmri.in_file')]),
(slicetimer, coregwf, [('slice_time_corrected_file',
'registration_fmri.in_file')]),
(coregwf, art, [('registration_fmri.out_file', 'realigned_files')
]),
(mcflirt, art, [('par_file', 'realignment_parameters')]),
(art, art_remotion, [('outlier_files', 'outlier_files')]),
(coregwf, art_remotion, [('registration_fmri.out_file', 'in_file')
]),
(coregwf, gunzip, [('n4bias.out_file', 'in_file')]),
(selectfiles, normalize_fmri, [('anat', 'image_to_align')]),
(art_remotion, normalize_fmri, [('out_file', 'apply_to_files')]),
(selectfiles, normalize_t1, [('anat', 'image_to_align')]),
(gunzip, normalize_t1, [('out_file', 'apply_to_files')]),
(selectfiles, normalize_masks, [('anat', 'image_to_align')]),
(coregwf, normalize_masks, [(('segmentation.partial_volume_files',
get_wm_csf), 'apply_to_files')]),
(normalize_fmri, smooth, [('normalized_files', 'in_files')]),
(smooth, extract_confounds_ws_csf, [('smoothed_files', 'in_file')
]),
(normalize_masks, extract_confounds_ws_csf, [('normalized_files',
'list_mask')]),
(mcflirt, extract_confounds_ws_csf, [('par_file', 'file_concat')]),
(art, extract_confounds_ws_csf, [('outlier_files', 'outlier_files')
]),
# (smooth, extract_confounds_gs, [('smoothed_files', 'in_file')]),
# (normalize_t1, extract_confounds_gs, [(('normalized_files',change_to_list), 'list_mask')]),
# (extract_confounds_ws_csf, extract_confounds_gs, [('out_file', 'file_concat')]),
(smooth, signal_extraction, [('smoothed_files', 'in_file')]),
# (extract_confounds_gs, signal_extraction, [('out_file', 'confounds_file')]),
(extract_confounds_ws_csf, signal_extraction,
[('out_file', 'confounds_file')]),
#(smooth, descomposition, [('smoothed_files', 'in_file')]),
#(extract_confounds_ws_csf, descomposition, [('out_file', 'confounds_file')]),
# (extract_confounds_gs, datasink, [('out_file', 'preprocessing.@confounds_with_gs')]),
(denoise, datasink, [('out_file', 'preprocessing.@t1_denoised')]),
(extract_confounds_ws_csf, datasink,
[('out_file', 'preprocessing.@confounds_without_gs')]),
(smooth, datasink, [('smoothed_files', 'preprocessing.@smoothed')
]),
(normalize_fmri, datasink, [('normalized_files',
'preprocessing.@fmri_normalized')]),
(normalize_t1, datasink, [('normalized_files',
'preprocessing.@t1_normalized')]),
(normalize_masks, datasink, [('normalized_files',
'preprocessing.@masks_normalized')]),
(signal_extraction, datasink, [('time_series_out_file',
'preprocessing.@time_serie')]),
(signal_extraction, datasink,
[('correlation_matrix_out_file',
'preprocessing.@correlation_matrix')])
])
#(signal_extraction, datasink,
# [('fmri_cleaned_out_file', 'preprocessing.@fmri_cleaned_out_file')])])
#,
#(descomposition, datasink, [('out_file', 'preprocessing.@descomposition')]),
#(descomposition, datasink, [('plot_files', 'preprocessing.@descomposition_plot_files')])
#])
preproc.write_graph(graph2use='colored',
format='png',
simple_form=True)
preproc.run()
