def makeTvMan(self,x,y,z,tex,playrate):
man = Actor()
man.loadModel('models/samples/teapot_on_tv/mechman_idle')
man.setPos(x,y,z)
man.reparentTo(render)
fp = man.find("**/faceplate")
fp.setTexture(tex,1)
man.setPlayRate(playrate, "mechman_anim")
man.loop("mechman_anim")
self.tvMen.append(man)
def __init__(self):
base.disableMouse()
base.cam.node().getLens().setNear(10.0)
base.cam.node().getLens().setFar(200.0)
camera.setPos(0, -50, 0)
# Check video card capabilities.
if (base.win.getGsg().getSupportsBasicShaders() == 0):
addTitle(
"Toon Shader: Video driver reports that shaders are not supported."
)
return
# Enable a 'light ramp' - this discretizes the lighting,
# which is half of what makes a model look like a cartoon.
# Light ramps only work if shader generation is enabled,
# so we call 'setShaderAuto'.
tempnode = NodePath(PandaNode("temp node"))
tempnode.setAttrib(LightRampAttrib.makeSingleThreshold(0.5, 0.4))
tempnode.setShaderAuto()
base.cam.node().setInitialState(tempnode.getState())
# Use class 'CommonFilters' to enable a cartoon inking filter.
# This can fail if the video card is not powerful enough, if so,
# display an error and exit.
self.separation = 1 # Pixels
self.filters = CommonFilters(base.win, base.cam)
filterok = self.filters.setCartoonInk(separation=self.separation)
if (filterok == False):
addTitle(
"Toon Shader: Video card not powerful enough to do image postprocessing"
)
return
# Post the instructions.
self.title = addTitle(
"Panda3D: Tutorial - Toon Shading with Normals-Based Inking")
self.inst1 = addInstructions(0.95, "ESC: Quit")
self.inst2 = addInstructions(
0.90, "Up/Down: Increase/Decrease Line Thickness")
self.inst3 = addInstructions(0.85,
"V: View the render-to-texture results")
# Load a dragon model and animate it.
self.character = Actor()
self.character.loadModel('models/samples/cartoon/nik_dragon')
self.character.reparentTo(render)
self.character.loadAnims({'win': 'models/samples/cartoon/nik_dragon'})
self.character.loop('win')
self.character.hprInterval(15, Point3(360, 0, 0)).loop()
# Create a non-attenuating point light and an ambient light.
plightnode = PointLight("point light")
plightnode.setAttenuation(Vec3(1, 0, 0))
plight = render.attachNewNode(plightnode)
plight.setPos(30, -50, 0)
alightnode = AmbientLight("ambient light")
alightnode.setColor(Vec4(0.8, 0.8, 0.8, 1))
alight = render.attachNewNode(alightnode)
render.setLight(alight)
render.setLight(plight)
# Panda contains a built-in viewer that lets you view the
# results of all render-to-texture operations. This lets you
# see what class CommonFilters is doing behind the scenes.
self.accept("v", base.bufferViewer.toggleEnable)
self.accept("V", base.bufferViewer.toggleEnable)
base.bufferViewer.setPosition("llcorner")
self.accept("s", self.filters.manager.resizeBuffers)
# These allow you to change cartooning parameters in realtime
self.accept("escape", sys.exit, [0])
self.accept("arrow_up", self.increaseSeparation)
self.accept("arrow_down", self.decreaseSeparation)
def __init__(self):
base.disableMouse()
base.setBackgroundColor(0, 0, 0)
camera.setPos(0, -50, 0)
# Check video card capabilities.
if (base.win.getGsg().getSupportsBasicShaders() == 0):
addTitle(
"Glow Filter: Video driver reports that shaders are not supported."
)
return
# Post the instructions
self.title = addTitle("Panda3D: Tutorial - Glow Filter")
self.inst1 = addInstructions(0.95, "ESC: Quit")
self.inst2 = addInstructions(0.90, "Space: Toggle Glow Filter On/Off")
self.inst3 = addInstructions(0.85, "Enter: Toggle Running/Spinning")
self.inst4 = addInstructions(0.80,
"V: View the render-to-texture results")
#create the shader that will determime what parts of the scene will glow
glowShader=Shader.load(os.path.join(PANDA_SHADER_PATH, \
"samples/glow/glow_shader.sha"))
# load our model
self.tron = Actor()
self.tron.loadModel("models/samples/glow/tron")
self.tron.loadAnims({"running": "models/samples/glow/tron_anim"})
self.tron.reparentTo(render)
self.interval = self.tron.hprInterval(60, Point3(360, 0, 0))
self.interval.loop()
self.isRunning = False
#put some lighting on the tron model
dlight = DirectionalLight('dlight')
alight = AmbientLight('alight')
dlnp = render.attachNewNode(dlight)
alnp = render.attachNewNode(alight)
dlight.setColor(Vec4(1.0, 0.7, 0.2, 1))
alight.setColor(Vec4(0.2, 0.2, 0.2, 1))
dlnp.setHpr(0, -60, 0)
render.setLight(dlnp)
render.setLight(alnp)
# create the glow buffer. This buffer renders like a normal scene,
# except that only the glowing materials should show up nonblack.
glowBuffer = base.win.makeTextureBuffer("Glow scene", 512, 512)
glowBuffer.setSort(-3)
glowBuffer.setClearColor(Vec4(0, 0, 0, 1))
# We have to attach a camera to the glow buffer. The glow camera
# must have the same frustum as the main camera. As long as the aspect
# ratios match, the rest will take care of itself.
glowCamera = base.makeCamera(glowBuffer,
lens=base.cam.node().getLens())
# Tell the glow camera to use the glow shader
tempnode = NodePath(PandaNode("temp node"))
tempnode.setShader(glowShader)
glowCamera.node().setInitialState(tempnode.getState())
# set up the pipeline: from glow scene to blur x to blur y to main window.
blurXBuffer=makeFilterBuffer(glowBuffer, "Blur X", -2, \
os.path.join(PANDA_SHADER_PATH, "samples/glow/glow_xblur.sha"))
blurYBuffer=makeFilterBuffer(blurXBuffer, "Blur Y", -1, \
os.path.join(PANDA_SHADER_PATH, "samples/glow/glow_yblur.sha"))
self.finalcard = blurYBuffer.getTextureCard()
self.finalcard.reparentTo(render2d)
self.finalcard.setAttrib(ColorBlendAttrib.make(ColorBlendAttrib.MAdd))
# Panda contains a built-in viewer that lets you view the results of
# your render-to-texture operations. This code configures the viewer.
self.accept("v", base.bufferViewer.toggleEnable)
self.accept("V", base.bufferViewer.toggleEnable)
base.bufferViewer.setPosition("llcorner")
base.bufferViewer.setLayout("hline")
base.bufferViewer.setCardSize(0.652, 0)
# event handling
self.accept("space", self.toggleGlow)
self.accept("enter", self.toggleDisplay)
self.accept("escape", sys.exit, [0])
self.glowOn = True
def __init__(self):
#This code puts the standard title and instruction text on screen
self.title = OnscreenText(
text="Panda3D: Tutorial - Joint Manipulation",
style=1,
fg=(1, 1, 1, 1),
font=font,
pos=(0.7, -0.95),
scale=.07)
self.onekeyText = genLabelText("ESC: Quit", 0)
self.onekeyText = genLabelText("[1]: Teapot", 1)
self.twokeyText = genLabelText("[2]: Candy cane", 2)
self.threekeyText = genLabelText("[3]: Banana", 3)
self.fourkeyText = genLabelText("[4]: Sword", 4)
#setup key input
self.accept('escape', sys.exit)
self.accept('1', self.setObject, [0])
self.accept('2', self.setObject, [1])
self.accept('3', self.setObject, [2])
self.accept('4', self.setObject, [3])
base.disableMouse() #Disable mouse-based camera-control
camera.setPos(0, -15, 2) #Position the camera
self.eve = Actor(
"models/samples/looking_and_gripping/eve",
#Load our animated charachter
{'walk': "models/samples/looking_and_gripping/eve_walk"})
self.eve.reparentTo(render) #Put it in the scene
#Now we use controlJoint to get a NodePath that's in control of her neck
#This must be done before any animations are played
self.eveNeck = self.eve.controlJoint(None, 'modelRoot', 'Neck')
#We now play an animation. An animation must be played, or at least posed
#for the nodepath we just got from controlJoint to actually effect the model
self.eve.actorInterval("walk", playRate=2).loop()
#Now we add a task that will take care of turning the head
taskMgr.add(self.turnHead, "turnHead")
#Now we will expose the joint the hand joint. ExposeJoint allows us to
#get the position of a joint while it is animating. This is different than
#controlJonit which stops that joint from animating but lets us move it.
#This is particularly usefull for putting an object (like a weapon) in an
#actor's hand
self.rightHand = self.eve.exposeJoint(None, 'modelRoot', 'RightHand')
#This is a table with models, positions, rotations, and scales of objects to
#be attached to our exposed joint. These are stock models and so they needed
#to be repositioned to look right.
positions = [("models/samples/looking_and_gripping/teapot", \
(0,-.66,-.95), (90,0,90), .4),
("models/samples/looking_and_gripping/candycane", \
(.15,-.99,-.22), (90,0,90), 1),
("models/samples/looking_and_gripping/banana", \
(.08,-.1,.09), (0,-90,0), 1.75),
("models/samples/looking_and_gripping/sword", \
(.11,.19,.06), (0,0,90), 1)]
self.models = [] #A list that will store our models objects
for row in positions:
np = loader.loadModel(row[0]) #Load the model
np.setPos(row[1][0], row[1][1], row[1][2]) #Position it
np.setHpr(row[2][0], row[2][1], row[2][2]) #Rotate it
np.setScale(row[3]) #Scale it
#Reparent the model to the exposed joint. That way when the joint moves,
#the model we just loaded will move with it.
np.reparentTo(self.rightHand)
self.models.append(np) #Add it to our models list
self.setObject(0) #Make object 0 the first shown
self.setupLights() #Put in some default lighting
def __init__(self):
base.disableMouse()
camera.setPos(0, -50, 0)
# Check video card capabilities.
if (base.win.getGsg().getSupportsBasicShaders() == 0):
addTitle(
"Toon Shader: Video driver reports that shaders are not supported."
)
return
# Post the instructions.
self.title = addTitle(
"Panda3D: Tutorial - Toon Shading with Normals-Based Inking")
self.inst1 = addInstructions(0.95, "ESC: Quit")
self.inst2 = addInstructions(
0.90, "Up/Down: Increase/Decrease Line Thickness")
self.inst3 = addInstructions(
0.85, "Left/Right: Decrease/Increase Line Darkness")
self.inst4 = addInstructions(0.80,
"V: View the render-to-texture results")
# This shader's job is to render the model with discrete lighting
# levels. The lighting calculations built into the shader assume
# a single nonattenuating point light.
tempnode = NodePath(PandaNode("temp node"))
tempnode.setShader(Shader.load(os.path.join(PANDA_SHADER_PATH, \
"samples/cartoon/cartoon_lighting.sha")))
base.cam.node().setInitialState(tempnode.getState())
# This is the object that represents the single "light", as far
# the shader is concerned. It's not a real Panda3D LightNode, but
# the shader doesn't care about that.
light = render.attachNewNode("light")
light.setPos(30, -50, 0)
# this call puts the light's nodepath into the render state.
# this enables the shader to access this light by name.
render.setShaderInput("light", light)
# The "normals buffer" will contain a picture of the model colorized
# so that the color of the model is a representation of the model's
# normal at that point.
normalsBuffer = base.win.makeTextureBuffer("normalsBuffer", 0, 0)
normalsBuffer.setClearColor(Vec4(0.5, 0.5, 0.5, 1))
self.normalsBuffer = normalsBuffer
normalsCamera = base.makeCamera(normalsBuffer,
lens=base.cam.node().getLens())
normalsCamera.node().setScene(render)
tempnode = NodePath(PandaNode("temp node"))
tempnode.setShader(Shader.load(os.path.join(PANDA_SHADER_PATH, \
"samples/cartoon/cartoon_normal.sha")))
normalsCamera.node().setInitialState(tempnode.getState())
#what we actually do to put edges on screen is apply them as a texture to
#a transparent screen-fitted card
drawnScene = normalsBuffer.getTextureCard()
drawnScene.setTransparency(1)
drawnScene.setColor(1, 1, 1, 0)
drawnScene.reparentTo(render2d)
self.drawnScene = drawnScene
# this shader accepts, as input, the picture from the normals buffer.
# it compares each adjacent pixel, looking for discontinuities.
# wherever a discontinuity exists, it emits black ink.
self.separation = 0.001
self.cutoff = 0.3
inkGen=Shader.load(os.path.join(PANDA_SHADER_PATH, \
"samples/cartoon/cartoon_ink.sha"))
drawnScene.setShader(inkGen)
drawnScene.setShaderInput("separation",
Vec4(self.separation, 0, self.separation, 0))
drawnScene.setShaderInput(
"cutoff", Vec4(self.cutoff, self.cutoff, self.cutoff, self.cutoff))
# Panda contains a built-in viewer that lets you view the results of
# your render-to-texture operations. This code configures the viewer.
self.accept("v", base.bufferViewer.toggleEnable)
self.accept("V", base.bufferViewer.toggleEnable)
base.bufferViewer.setPosition("llcorner")
# Load a dragon model and animate it.
self.character = Actor()
self.character.loadModel('models/samples/cartoon/nik_dragon')
self.character.reparentTo(render)
self.character.loadAnims({'win': 'models/samples/cartoon/nik_dragon'})
self.character.loop('win')
self.character.hprInterval(15, Point3(360, 0, 0)).loop()
# these allow you to change cartooning parameters in realtime
self.accept("escape", sys.exit, [0])
self.accept("arrow_up", self.increaseSeparation)
self.accept("arrow_down", self.decreaseSeparation)
self.accept("arrow_left", self.increaseCutoff)
self.accept("arrow_right", self.decreaseCutoff)
def __init__(self):
base.disableMouse()
base.setBackgroundColor(0, 0, 0)
camera.setPos(0, -50, 0)
# Check video card capabilities.
if (base.win.getGsg().getSupportsBasicShaders() == 0):
addTitle(
"Glow Filter: Video driver reports that shaders are not supported."
)
return
# Use class 'CommonFilters' to enable a bloom filter.
# The brightness of a pixel is measured using a weighted average
# of R,G,B,A. We put all the weight on Alpha, meaning that for
# us, the framebuffer's alpha channel alpha controls bloom.
self.filters = CommonFilters(base.win, base.cam)
filterok = self.filters.setBloom(blend=(0, 0, 0, 1),
desat=-0.5,
intensity=3.0,
size="small")
if (filterok == False):
addTitle(
"Toon Shader: Video card not powerful enough to do image postprocessing"
)
return
self.glowSize = 1
# Post the instructions
self.title = addTitle("Panda3D: Tutorial - Glow Filter")
self.inst1 = addInstructions(0.95, "ESC: Quit")
self.inst2 = addInstructions(
0.90, "Space: Toggle Glow Filter Small/Med/Large/Off")
self.inst3 = addInstructions(0.85, "Enter: Toggle Running/Spinning")
self.inst4 = addInstructions(0.80,
"V: View the render-to-texture results")
# load our model
self.tron = Actor()
self.tron.loadModel("samples/glow/tron")
self.tron.loadAnims({"running": "samples/glow/models/tron_anim"})
self.tron.reparentTo(render)
self.interval = self.tron.hprInterval(60, Point3(360, 0, 0))
self.interval.loop()
self.isRunning = False
# put some lighting on the model
dlight = DirectionalLight('dlight')
alight = AmbientLight('alight')
dlnp = render.attachNewNode(dlight)
alnp = render.attachNewNode(alight)
dlight.setColor(Vec4(1.0, 0.7, 0.2, 1))
alight.setColor(Vec4(0.2, 0.2, 0.2, 1))
dlnp.setHpr(0, -60, 0)
render.setLight(dlnp)
render.setLight(alnp)
# Panda contains a built-in viewer that lets you view the results of
# your render-to-texture operations. This code configures the viewer.
self.accept("v", base.bufferViewer.toggleEnable)
self.accept("V", base.bufferViewer.toggleEnable)
base.bufferViewer.setPosition("llcorner")
base.bufferViewer.setLayout("hline")
#base.camLens.setFov(100)
# event handling
self.accept("space", self.toggleGlow)
self.accept("enter", self.toggleDisplay)
self.accept("escape", sys.exit, [0])
def __init__(self):
self.keyMap = {
"left": 0,
"right": 0,
"forward": 0,
"cam-left": 0,
"cam-right": 0
}
base.win.setClearColor(Vec4(0, 0, 0, 1))
# Post the instructions
self.title = addTitle(
"Panda3D Tutorial: Roaming Ralph (Walking on Uneven Terrain)")
self.inst1 = addInstructions(0.95, "[ESC]: Quit")
self.inst2 = addInstructions(0.90, "[Left Arrow]: Rotate Ralph Left")
self.inst3 = addInstructions(0.85, "[Right Arrow]: Rotate Ralph Right")
self.inst4 = addInstructions(0.80, "[Up Arrow]: Run Ralph Forward")
self.inst6 = addInstructions(0.70, "[A]: Rotate Camera Left")
self.inst7 = addInstructions(0.65, "[S]: Rotate Camera Right")
# Set up the environment
#
# This environment model contains collision meshes. If you look
# in the egg file, you will see the following:
#
# <Collide> { Polyset keep descend }
#
# This tag causes the following mesh to be converted to a collision
# mesh -- a mesh which is optimized for collision, not rendering.
# It also keeps the original mesh, so there are now two copies ---
# one optimized for rendering, one for collisions.
self.environ = loader.loadModel("models/samples/roaming_ralph/world")
self.environ.reparentTo(render)
self.environ.setPos(0, 0, 0)
# Create the main character, Ralph
ralphStartPos = self.environ.find("**/start_point").getPos()
self.ralph = Actor(
"models/samples/roaming_ralph/ralph", {
"run": "models/samples/roaming_ralph/ralph_run",
"walk": "models/samples/roaming_ralph/ralph_walk"
})
self.ralph.reparentTo(render)
self.ralph.setScale(.2)
self.ralph.setPos(ralphStartPos)
# Create a floater object. We use the "floater" as a temporary
# variable in a variety of calculations.
self.floater = NodePath(PandaNode("floater"))
self.floater.reparentTo(render)
# Accept the control keys for movement and rotation
self.accept("escape", sys.exit)
self.accept("arrow_left", self.setKey, ["left", 1])
self.accept("arrow_right", self.setKey, ["right", 1])
self.accept("arrow_up", self.setKey, ["forward", 1])
self.accept("a", self.setKey, ["cam-left", 1])
self.accept("s", self.setKey, ["cam-right", 1])
self.accept("arrow_left-up", self.setKey, ["left", 0])
self.accept("arrow_right-up", self.setKey, ["right", 0])
self.accept("arrow_up-up", self.setKey, ["forward", 0])
self.accept("a-up", self.setKey, ["cam-left", 0])
self.accept("s-up", self.setKey, ["cam-right", 0])
taskMgr.add(self.move, "moveTask")
# Game state variables
self.isMoving = False
# Set up the camera
base.disableMouse()
base.camera.setPos(self.ralph.getX(), self.ralph.getY() + 10, 2)
# We will detect the height of the terrain by creating a collision
# ray and casting it downward toward the terrain. One ray will
# start above ralph's head, and the other will start above the camera.
# A ray may hit the terrain, or it may hit a rock or a tree. If it
# hits the terrain, we can detect the height. If it hits anything
# else, we rule that the move is illegal.
self.cTrav = CollisionTraverser()
self.ralphGroundRay = CollisionRay()
self.ralphGroundRay.setOrigin(0, 0, 1000)
self.ralphGroundRay.setDirection(0, 0, -1)
self.ralphGroundCol = CollisionNode('ralphRay')
self.ralphGroundCol.addSolid(self.ralphGroundRay)
self.ralphGroundCol.setFromCollideMask(BitMask32.bit(0))
self.ralphGroundCol.setIntoCollideMask(BitMask32.allOff())
self.ralphGroundColNp = self.ralph.attachNewNode(self.ralphGroundCol)
self.ralphGroundHandler = CollisionHandlerQueue()
self.cTrav.addCollider(self.ralphGroundColNp, self.ralphGroundHandler)
self.camGroundRay = CollisionRay()
self.camGroundRay.setOrigin(0, 0, 1000)
self.camGroundRay.setDirection(0, 0, -1)
self.camGroundCol = CollisionNode('camRay')
self.camGroundCol.addSolid(self.camGroundRay)
self.camGroundCol.setFromCollideMask(BitMask32.bit(0))
self.camGroundCol.setIntoCollideMask(BitMask32.allOff())
self.camGroundColNp = base.camera.attachNewNode(self.camGroundCol)
self.camGroundHandler = CollisionHandlerQueue()
self.cTrav.addCollider(self.camGroundColNp, self.camGroundHandler)
def chooseEffectWhirlpool(self):
base.setBackgroundColor(0, 0, 0, 1)
self.bcard.show()
self.fcard.hide()
self.bcard.setColor(1, 1, 1, 1)
self.bcard.setScale(0.999)
self.bcard.setPos(0, 0, 0)
self.bcard.setR(1)
self.clickrate = 10000
self.nextclick = 0
t = MotionTrails()
character = Actor()
character.loadModel('models/samples/motion_trails/dancer')
character.reparentTo(render)
character.loadAnims({'win': 'models/samples/motion_trails/dancer'})
character.loop('win')
# character.hprInterval(15, Point3(360, 0,0)).loop()
#put some lighting on the model
dlight = DirectionalLight('dlight')
alight = AmbientLight('alight')
dlnp = render.attachNewNode(dlight)
alnp = render.attachNewNode(alight)
dlight.setColor(Vec4(1.0, 0.9, 0.8, 1))
alight.setColor(Vec4(0.2, 0.3, 0.4, 1))
dlnp.setHpr(0, -60, 0)
render.setLight(dlnp)
