def test_nbytes_block(self):
arr = SparseArray([1, 2, 0, 0, 0], kind="block")
result = arr.nbytes
# (2 * 8) + 4 + 4
# sp_values, blocs, blengths
assert result == 24
def test_constructor_na_dtype(self, dtype):
with pytest.raises(ValueError, match="Cannot convert"):
SparseArray([0, 1, np.nan], dtype=dtype)
def test_with_list(op):
arr = SparseArray([0, 1], fill_value=0)
result = op(arr, [0, 1])
expected = op(arr, SparseArray([0, 1]))
tm.assert_sp_array_equal(result, expected)
def test_constructor_sparse_dtype_str(self):
result = SparseArray([1, 0, 0, 1], dtype="Sparse[int32]")
expected = SparseArray([1, 0, 0, 1], dtype=np.int32)
tm.assert_sp_array_equal(result, expected)
assert result.sp_values.dtype == np.dtype("int32")
def test_fillna(self):
s = SparseArray([1, np.nan, np.nan, 3, np.nan])
res = s.fillna(-1)
exp = SparseArray([1, -1, -1, 3, -1], fill_value=-1, dtype=np.float64)
tm.assert_sp_array_equal(res, exp)
s = SparseArray([1, np.nan, np.nan, 3, np.nan], fill_value=0)
res = s.fillna(-1)
exp = SparseArray([1, -1, -1, 3, -1], fill_value=0, dtype=np.float64)
tm.assert_sp_array_equal(res, exp)
s = SparseArray([1, np.nan, 0, 3, 0])
res = s.fillna(-1)
exp = SparseArray([1, -1, 0, 3, 0], fill_value=-1, dtype=np.float64)
tm.assert_sp_array_equal(res, exp)
s = SparseArray([1, np.nan, 0, 3, 0], fill_value=0)
res = s.fillna(-1)
exp = SparseArray([1, -1, 0, 3, 0], fill_value=0, dtype=np.float64)
tm.assert_sp_array_equal(res, exp)
s = SparseArray([np.nan, np.nan, np.nan, np.nan])
res = s.fillna(-1)
exp = SparseArray([-1, -1, -1, -1], fill_value=-1, dtype=np.float64)
tm.assert_sp_array_equal(res, exp)
s = SparseArray([np.nan, np.nan, np.nan, np.nan], fill_value=0)
res = s.fillna(-1)
exp = SparseArray([-1, -1, -1, -1], fill_value=0, dtype=np.float64)
tm.assert_sp_array_equal(res, exp)
# float dtype's fill_value is np.nan, replaced by -1
s = SparseArray([0.0, 0.0, 0.0, 0.0])
res = s.fillna(-1)
exp = SparseArray([0.0, 0.0, 0.0, 0.0], fill_value=-1)
tm.assert_sp_array_equal(res, exp)
# int dtype shouldn't have missing. No changes.
s = SparseArray([0, 0, 0, 0])
assert s.dtype == SparseDtype(np.int64)
assert s.fill_value == 0
res = s.fillna(-1)
tm.assert_sp_array_equal(res, s)
s = SparseArray([0, 0, 0, 0], fill_value=0)
assert s.dtype == SparseDtype(np.int64)
assert s.fill_value == 0
res = s.fillna(-1)
exp = SparseArray([0, 0, 0, 0], fill_value=0)
tm.assert_sp_array_equal(res, exp)
# fill_value can be nan if there is no missing hole.
# only fill_value will be changed
s = SparseArray([0, 0, 0, 0], fill_value=np.nan)
assert s.dtype == SparseDtype(np.int64, fill_value=np.nan)
assert np.isnan(s.fill_value)
res = s.fillna(-1)
exp = SparseArray([0, 0, 0, 0], fill_value=-1)
tm.assert_sp_array_equal(res, exp)
def test_constructor_dtype_str(self):
result = SparseArray([1, 2, 3], dtype="int")
expected = SparseArray([1, 2, 3], dtype=int)
tm.assert_sp_array_equal(result, expected)
def test_shape(self, data, shape, dtype):
# GH 21126
out = SparseArray(data, dtype=dtype)
assert out.shape == shape
def test_unique_all_sparse():
# https://github.com/pandas-dev/pandas/issues/23168
arr = SparseArray([0, 0])
result = arr.unique()
expected = SparseArray([0])
tm.assert_sp_array_equal(result, expected)
def test_map_missing():
arr = SparseArray([0, 1, 2])
expected = SparseArray([10, 11, None], fill_value=10)
result = arr.map({0: 10, 1: 11})
tm.assert_sp_array_equal(result, expected)
def test_first_fill_value_loc(arr, loc):
result = SparseArray(arr)._first_fill_value_loc()
assert result == loc
def test_unique_na_fill(arr, fill_value):
a = SparseArray(arr, fill_value=fill_value).unique()
b = pd.Series(arr).unique()
assert isinstance(a, SparseArray)
a = np.asarray(a)
tm.assert_numpy_array_equal(a, b)
def test_npoints(self):
arr = SparseArray([0, 1])
assert arr.npoints == 1
def test_density(self):
arr = SparseArray([0, 1])
assert arr.density == 0.5
def test_asarray_datetime64(self):
s = SparseArray(pd.to_datetime(["2012", None, None, "2013"]))
np.asarray(s)
def test_astype_nan_raises(self):
arr = SparseArray([1.0, np.nan])
with pytest.raises(ValueError, match="Cannot convert non-finite"):
arr.astype(int)
class TestSparseArray:
def setup_method(self, method):
self.arr_data = np.array(
[np.nan, np.nan, 1, 2, 3, np.nan, 4, 5, np.nan, 6])
self.arr = SparseArray(self.arr_data)
self.zarr = SparseArray([0, 0, 1, 2, 3, 0, 4, 5, 0, 6], fill_value=0)
def test_constructor_dtype(self):
arr = SparseArray([np.nan, 1, 2, np.nan])
assert arr.dtype == SparseDtype(np.float64, np.nan)
assert arr.dtype.subtype == np.float64
assert np.isnan(arr.fill_value)
arr = SparseArray([np.nan, 1, 2, np.nan], fill_value=0)
assert arr.dtype == SparseDtype(np.float64, 0)
assert arr.fill_value == 0
arr = SparseArray([0, 1, 2, 4], dtype=np.float64)
assert arr.dtype == SparseDtype(np.float64, np.nan)
assert np.isnan(arr.fill_value)
arr = SparseArray([0, 1, 2, 4], dtype=np.int64)
assert arr.dtype == SparseDtype(np.int64, 0)
assert arr.fill_value == 0
arr = SparseArray([0, 1, 2, 4], fill_value=0, dtype=np.int64)
assert arr.dtype == SparseDtype(np.int64, 0)
assert arr.fill_value == 0
arr = SparseArray([0, 1, 2, 4], dtype=None)
assert arr.dtype == SparseDtype(np.int64, 0)
assert arr.fill_value == 0
arr = SparseArray([0, 1, 2, 4], fill_value=0, dtype=None)
assert arr.dtype == SparseDtype(np.int64, 0)
assert arr.fill_value == 0
def test_constructor_dtype_str(self):
result = SparseArray([1, 2, 3], dtype="int")
expected = SparseArray([1, 2, 3], dtype=int)
tm.assert_sp_array_equal(result, expected)
def test_constructor_sparse_dtype(self):
result = SparseArray([1, 0, 0, 1], dtype=SparseDtype("int64", -1))
expected = SparseArray([1, 0, 0, 1], fill_value=-1, dtype=np.int64)
tm.assert_sp_array_equal(result, expected)
assert result.sp_values.dtype == np.dtype("int64")
def test_constructor_sparse_dtype_str(self):
result = SparseArray([1, 0, 0, 1], dtype="Sparse[int32]")
expected = SparseArray([1, 0, 0, 1], dtype=np.int32)
tm.assert_sp_array_equal(result, expected)
assert result.sp_values.dtype == np.dtype("int32")
def test_constructor_object_dtype(self):
# GH 11856
arr = SparseArray(["A", "A", np.nan, "B"], dtype=object)
assert arr.dtype == SparseDtype(object)
assert np.isnan(arr.fill_value)
arr = SparseArray(["A", "A", np.nan, "B"],
dtype=object,
fill_value="A")
assert arr.dtype == SparseDtype(object, "A")
assert arr.fill_value == "A"
# GH 17574
data = [False, 0, 100.0, 0.0]
arr = SparseArray(data, dtype=object, fill_value=False)
assert arr.dtype == SparseDtype(object, False)
assert arr.fill_value is False
arr_expected = np.array(data, dtype=object)
it = (type(x) == type(y) and x == y for x, y in zip(arr, arr_expected))
assert np.fromiter(it, dtype=np.bool_).all()
@pytest.mark.parametrize("dtype", [SparseDtype(int, 0), int])
def test_constructor_na_dtype(self, dtype):
with pytest.raises(ValueError, match="Cannot convert"):
SparseArray([0, 1, np.nan], dtype=dtype)
def test_constructor_warns_when_losing_timezone(self):
# GH#32501 warn when losing timezone inforamtion
dti = pd.date_range("2016-01-01", periods=3, tz="US/Pacific")
expected = SparseArray(np.asarray(dti, dtype="datetime64[ns]"))
with tm.assert_produces_warning(UserWarning):
result = SparseArray(dti)
tm.assert_sp_array_equal(result, expected)
with tm.assert_produces_warning(UserWarning):
result = SparseArray(pd.Series(dti))
tm.assert_sp_array_equal(result, expected)
def test_constructor_spindex_dtype(self):
arr = SparseArray(data=[1, 2], sparse_index=IntIndex(4, [1, 2]))
# XXX: Behavior change: specifying SparseIndex no longer changes the
# fill_value
expected = SparseArray([0, 1, 2, 0], kind="integer")
tm.assert_sp_array_equal(arr, expected)
assert arr.dtype == SparseDtype(np.int64)
assert arr.fill_value == 0
arr = SparseArray(
data=[1, 2, 3],
sparse_index=IntIndex(4, [1, 2, 3]),
dtype=np.int64,
fill_value=0,
)
exp = SparseArray([0, 1, 2, 3], dtype=np.int64, fill_value=0)
tm.assert_sp_array_equal(arr, exp)
assert arr.dtype == SparseDtype(np.int64)
assert arr.fill_value == 0
arr = SparseArray(data=[1, 2],
sparse_index=IntIndex(4, [1, 2]),
fill_value=0,
dtype=np.int64)
exp = SparseArray([0, 1, 2, 0], fill_value=0, dtype=np.int64)
tm.assert_sp_array_equal(arr, exp)
assert arr.dtype == SparseDtype(np.int64)
assert arr.fill_value == 0
arr = SparseArray(
data=[1, 2, 3],
sparse_index=IntIndex(4, [1, 2, 3]),
dtype=None,
fill_value=0,
)
exp = SparseArray([0, 1, 2, 3], dtype=None)
tm.assert_sp_array_equal(arr, exp)
assert arr.dtype == SparseDtype(np.int64)
assert arr.fill_value == 0
@pytest.mark.parametrize("sparse_index", [None, IntIndex(1, [0])])
def test_constructor_spindex_dtype_scalar(self, sparse_index):
# scalar input
arr = SparseArray(data=1, sparse_index=sparse_index, dtype=None)
exp = SparseArray([1], dtype=None)
tm.assert_sp_array_equal(arr, exp)
assert arr.dtype == SparseDtype(np.int64)
assert arr.fill_value == 0
arr = SparseArray(data=1, sparse_index=IntIndex(1, [0]), dtype=None)
exp = SparseArray([1], dtype=None)
tm.assert_sp_array_equal(arr, exp)
assert arr.dtype == SparseDtype(np.int64)
assert arr.fill_value == 0
def test_constructor_spindex_dtype_scalar_broadcasts(self):
arr = SparseArray(data=[1, 2],
sparse_index=IntIndex(4, [1, 2]),
fill_value=0,
dtype=None)
exp = SparseArray([0, 1, 2, 0], fill_value=0, dtype=None)
tm.assert_sp_array_equal(arr, exp)
assert arr.dtype == SparseDtype(np.int64)
assert arr.fill_value == 0
@pytest.mark.parametrize(
"data, fill_value",
[
(np.array([1, 2]), 0),
(np.array([1.0, 2.0]), np.nan),
([True, False], False),
([pd.Timestamp("2017-01-01")], pd.NaT),
],
)
def test_constructor_inferred_fill_value(self, data, fill_value):
result = SparseArray(data).fill_value
if pd.isna(fill_value):
assert pd.isna(result)
else:
assert result == fill_value
@pytest.mark.parametrize("format", ["coo", "csc", "csr"])
@pytest.mark.parametrize("size", [0, 10])
@td.skip_if_no_scipy
def test_from_spmatrix(self, size, format):
import scipy.sparse
mat = scipy.sparse.random(size, 1, density=0.5, format=format)
result = SparseArray.from_spmatrix(mat)
result = np.asarray(result)
expected = mat.toarray().ravel()
tm.assert_numpy_array_equal(result, expected)
@pytest.mark.parametrize("format", ["coo", "csc", "csr"])
@td.skip_if_no_scipy
def test_from_spmatrix_including_explicit_zero(self, format):
import scipy.sparse
mat = scipy.sparse.random(10, 1, density=0.5, format=format)
mat.data[0] = 0
result = SparseArray.from_spmatrix(mat)
result = np.asarray(result)
expected = mat.toarray().ravel()
tm.assert_numpy_array_equal(result, expected)
@td.skip_if_no_scipy
def test_from_spmatrix_raises(self):
import scipy.sparse
mat = scipy.sparse.eye(5, 4, format="csc")
with pytest.raises(ValueError, match="not '4'"):
SparseArray.from_spmatrix(mat)
@pytest.mark.parametrize(
"scalar,dtype",
[
(False, SparseDtype(bool, False)),
(0.0, SparseDtype("float64", 0)),
(1, SparseDtype("int64", 1)),
("z", SparseDtype("object", "z")),
],
)
def test_scalar_with_index_infer_dtype(self, scalar, dtype):
# GH 19163
arr = SparseArray(scalar, index=[1, 2, 3], fill_value=scalar)
exp = SparseArray([scalar, scalar, scalar], fill_value=scalar)
tm.assert_sp_array_equal(arr, exp)
assert arr.dtype == dtype
assert exp.dtype == dtype
def test_get_item(self):
assert np.isnan(self.arr[1])
assert self.arr[2] == 1
assert self.arr[7] == 5
assert self.zarr[0] == 0
assert self.zarr[2] == 1
assert self.zarr[7] == 5
errmsg = re.compile("bounds")
with pytest.raises(IndexError, match=errmsg):
self.arr[11]
with pytest.raises(IndexError, match=errmsg):
self.arr[-11]
assert self.arr[-1] == self.arr[len(self.arr) - 1]
def test_take_scalar_raises(self):
msg = "'indices' must be an array, not a scalar '2'."
with pytest.raises(ValueError, match=msg):
self.arr.take(2)
def test_take(self):
exp = SparseArray(np.take(self.arr_data, [2, 3]))
tm.assert_sp_array_equal(self.arr.take([2, 3]), exp)
exp = SparseArray(np.take(self.arr_data, [0, 1, 2]))
tm.assert_sp_array_equal(self.arr.take([0, 1, 2]), exp)
def test_take_all_empty(self):
a = pd.array([0, 0], dtype=pd.SparseDtype("int64"))
result = a.take([0, 1], allow_fill=True, fill_value=np.nan)
tm.assert_sp_array_equal(a, result)
def test_take_fill_value(self):
data = np.array([1, np.nan, 0, 3, 0])
sparse = SparseArray(data, fill_value=0)
exp = SparseArray(np.take(data, [0]), fill_value=0)
tm.assert_sp_array_equal(sparse.take([0]), exp)
exp = SparseArray(np.take(data, [1, 3, 4]), fill_value=0)
tm.assert_sp_array_equal(sparse.take([1, 3, 4]), exp)
def test_take_negative(self):
exp = SparseArray(np.take(self.arr_data, [-1]))
tm.assert_sp_array_equal(self.arr.take([-1]), exp)
exp = SparseArray(np.take(self.arr_data, [-4, -3, -2]))
tm.assert_sp_array_equal(self.arr.take([-4, -3, -2]), exp)
@pytest.mark.parametrize("fill_value", [0, None, np.nan])
def test_shift_fill_value(self, fill_value):
# GH #24128
sparse = SparseArray(np.array([1, 0, 0, 3, 0]), fill_value=8.0)
res = sparse.shift(1, fill_value=fill_value)
if isna(fill_value):
fill_value = res.dtype.na_value
exp = SparseArray(np.array([fill_value, 1, 0, 0, 3]), fill_value=8.0)
tm.assert_sp_array_equal(res, exp)
def test_bad_take(self):
with pytest.raises(IndexError, match="bounds"):
self.arr.take([11])
def test_take_filling(self):
# similar tests as GH 12631
sparse = SparseArray([np.nan, np.nan, 1, np.nan, 4])
result = sparse.take(np.array([1, 0, -1]))
expected = SparseArray([np.nan, np.nan, 4])
tm.assert_sp_array_equal(result, expected)
# XXX: test change: fill_value=True -> allow_fill=True
result = sparse.take(np.array([1, 0, -1]), allow_fill=True)
expected = SparseArray([np.nan, np.nan, np.nan])
tm.assert_sp_array_equal(result, expected)
# allow_fill=False
result = sparse.take(np.array([1, 0, -1]),
allow_fill=False,
fill_value=True)
expected = SparseArray([np.nan, np.nan, 4])
tm.assert_sp_array_equal(result, expected)
msg = "Invalid value in 'indices'"
with pytest.raises(ValueError, match=msg):
sparse.take(np.array([1, 0, -2]), allow_fill=True)
with pytest.raises(ValueError, match=msg):
sparse.take(np.array([1, 0, -5]), allow_fill=True)
msg = "out of bounds value in 'indices'"
with pytest.raises(IndexError, match=msg):
sparse.take(np.array([1, -6]))
with pytest.raises(IndexError, match=msg):
sparse.take(np.array([1, 5]))
with pytest.raises(IndexError, match=msg):
sparse.take(np.array([1, 5]), allow_fill=True)
def test_take_filling_fill_value(self):
# same tests as GH 12631
sparse = SparseArray([np.nan, 0, 1, 0, 4], fill_value=0)
result = sparse.take(np.array([1, 0, -1]))
expected = SparseArray([0, np.nan, 4], fill_value=0)
tm.assert_sp_array_equal(result, expected)
# fill_value
result = sparse.take(np.array([1, 0, -1]), allow_fill=True)
# XXX: behavior change.
# the old way of filling self.fill_value doesn't follow EA rules.
# It's supposed to be self.dtype.na_value (nan in this case)
expected = SparseArray([0, np.nan, np.nan], fill_value=0)
tm.assert_sp_array_equal(result, expected)
# allow_fill=False
result = sparse.take(np.array([1, 0, -1]),
allow_fill=False,
fill_value=True)
expected = SparseArray([0, np.nan, 4], fill_value=0)
tm.assert_sp_array_equal(result, expected)
msg = "Invalid value in 'indices'."
with pytest.raises(ValueError, match=msg):
sparse.take(np.array([1, 0, -2]), allow_fill=True)
with pytest.raises(ValueError, match=msg):
sparse.take(np.array([1, 0, -5]), allow_fill=True)
msg = "out of bounds value in 'indices'"
with pytest.raises(IndexError, match=msg):
sparse.take(np.array([1, -6]))
with pytest.raises(IndexError, match=msg):
sparse.take(np.array([1, 5]))
with pytest.raises(IndexError, match=msg):
sparse.take(np.array([1, 5]), fill_value=True)
def test_take_filling_all_nan(self):
sparse = SparseArray([np.nan, np.nan, np.nan, np.nan, np.nan])
# XXX: did the default kind from take change?
result = sparse.take(np.array([1, 0, -1]))
expected = SparseArray([np.nan, np.nan, np.nan], kind="block")
tm.assert_sp_array_equal(result, expected)
result = sparse.take(np.array([1, 0, -1]), fill_value=True)
expected = SparseArray([np.nan, np.nan, np.nan], kind="block")
tm.assert_sp_array_equal(result, expected)
msg = "out of bounds value in 'indices'"
with pytest.raises(IndexError, match=msg):
sparse.take(np.array([1, -6]))
with pytest.raises(IndexError, match=msg):
sparse.take(np.array([1, 5]))
with pytest.raises(IndexError, match=msg):
sparse.take(np.array([1, 5]), fill_value=True)
def test_set_item(self):
def setitem():
self.arr[5] = 3
def setslice():
self.arr[1:5] = 2
with pytest.raises(TypeError, match="assignment via setitem"):
setitem()
with pytest.raises(TypeError, match="assignment via setitem"):
setslice()
def test_constructor_from_too_large_array(self):
with pytest.raises(TypeError, match="expected dimension <= 1 data"):
SparseArray(np.arange(10).reshape((2, 5)))
def test_constructor_from_sparse(self):
res = SparseArray(self.zarr)
assert res.fill_value == 0
tm.assert_almost_equal(res.sp_values, self.zarr.sp_values)
def test_constructor_copy(self):
cp = SparseArray(self.arr, copy=True)
cp.sp_values[:3] = 0
assert not (self.arr.sp_values[:3] == 0).any()
not_copy = SparseArray(self.arr)
not_copy.sp_values[:3] = 0
assert (self.arr.sp_values[:3] == 0).all()
def test_constructor_bool(self):
# GH 10648
data = np.array([False, False, True, True, False, False])
arr = SparseArray(data, fill_value=False, dtype=bool)
assert arr.dtype == SparseDtype(bool)
tm.assert_numpy_array_equal(arr.sp_values, np.array([True, True]))
# Behavior change: np.asarray densifies.
# tm.assert_numpy_array_equal(arr.sp_values, np.asarray(arr))
tm.assert_numpy_array_equal(arr.sp_index.indices,
np.array([2, 3], np.int32))
dense = arr.to_dense()
assert dense.dtype == bool
tm.assert_numpy_array_equal(dense, data)
def test_constructor_bool_fill_value(self):
arr = SparseArray([True, False, True], dtype=None)
assert arr.dtype == SparseDtype(np.bool_)
assert not arr.fill_value
arr = SparseArray([True, False, True], dtype=np.bool_)
assert arr.dtype == SparseDtype(np.bool_)
assert not arr.fill_value
arr = SparseArray([True, False, True], dtype=np.bool_, fill_value=True)
assert arr.dtype == SparseDtype(np.bool_, True)
assert arr.fill_value
def test_constructor_float32(self):
# GH 10648
data = np.array([1.0, np.nan, 3], dtype=np.float32)
arr = SparseArray(data, dtype=np.float32)
assert arr.dtype == SparseDtype(np.float32)
tm.assert_numpy_array_equal(arr.sp_values,
np.array([1, 3], dtype=np.float32))
# Behavior change: np.asarray densifies.
# tm.assert_numpy_array_equal(arr.sp_values, np.asarray(arr))
tm.assert_numpy_array_equal(arr.sp_index.indices,
np.array([0, 2], dtype=np.int32))
dense = arr.to_dense()
assert dense.dtype == np.float32
tm.assert_numpy_array_equal(dense, data)
def test_astype(self):
# float -> float
arr = SparseArray([None, None, 0, 2])
result = arr.astype("Sparse[float32]")
expected = SparseArray([None, None, 0, 2], dtype=np.dtype("float32"))
tm.assert_sp_array_equal(result, expected)
dtype = SparseDtype("float64", fill_value=0)
result = arr.astype(dtype)
expected = SparseArray._simple_new(
np.array([0.0, 2.0], dtype=dtype.subtype), IntIndex(4, [2, 3]),
dtype)
tm.assert_sp_array_equal(result, expected)
dtype = SparseDtype("int64", 0)
result = arr.astype(dtype)
expected = SparseArray._simple_new(np.array([0, 2], dtype=np.int64),
IntIndex(4, [2, 3]), dtype)
tm.assert_sp_array_equal(result, expected)
arr = SparseArray([0, np.nan, 0, 1], fill_value=0)
with pytest.raises(ValueError, match="NA"):
arr.astype("Sparse[i8]")
def test_astype_bool(self):
a = SparseArray([1, 0, 0, 1], dtype=SparseDtype(int, 0))
result = a.astype(bool)
expected = SparseArray([True, 0, 0, True], dtype=SparseDtype(bool, 0))
tm.assert_sp_array_equal(result, expected)
# update fill value
result = a.astype(SparseDtype(bool, False))
expected = SparseArray([True, False, False, True],
dtype=SparseDtype(bool, False))
tm.assert_sp_array_equal(result, expected)
def test_astype_all(self, any_real_dtype):
vals = np.array([1, 2, 3])
arr = SparseArray(vals, fill_value=1)
typ = np.dtype(any_real_dtype)
res = arr.astype(typ)
assert res.dtype == SparseDtype(typ, 1)
assert res.sp_values.dtype == typ
tm.assert_numpy_array_equal(np.asarray(res.to_dense()),
vals.astype(typ))
@pytest.mark.parametrize(
"array, dtype, expected",
[
(
SparseArray([0, 1]),
"float",
SparseArray([0.0, 1.0], dtype=SparseDtype(float, 0.0)),
),
(SparseArray([0, 1]), bool, SparseArray([False, True])),
(
SparseArray([0, 1], fill_value=1),
bool,
SparseArray([False, True], dtype=SparseDtype(bool, True)),
),
pytest.param(
SparseArray([0, 1]),
"datetime64[ns]",
SparseArray(
np.array([0, 1], dtype="datetime64[ns]"),
dtype=SparseDtype("datetime64[ns]", pd.Timestamp("1970")),
),
marks=[pytest.mark.xfail(reason="NumPy-7619")],
),
(
SparseArray([0, 1, 10]),
str,
SparseArray(["0", "1", "10"], dtype=SparseDtype(str, "0")),
),
(SparseArray(["10", "20"]), float, SparseArray([10.0, 20.0])),
(
SparseArray([0, 1, 0]),
object,
SparseArray([0, 1, 0], dtype=SparseDtype(object, 0)),
),
],
)
def test_astype_more(self, array, dtype, expected):
result = array.astype(dtype)
tm.assert_sp_array_equal(result, expected)
def test_astype_nan_raises(self):
arr = SparseArray([1.0, np.nan])
with pytest.raises(ValueError, match="Cannot convert non-finite"):
arr.astype(int)
def test_set_fill_value(self):
arr = SparseArray([1.0, np.nan, 2.0], fill_value=np.nan)
arr.fill_value = 2
assert arr.fill_value == 2
arr = SparseArray([1, 0, 2], fill_value=0, dtype=np.int64)
arr.fill_value = 2
assert arr.fill_value == 2
# XXX: this seems fine? You can construct an integer
# sparsearray with NaN fill value, why not update one?
# coerces to int
# msg = "unable to set fill_value 3\\.1 to int64 dtype"
# with pytest.raises(ValueError, match=msg):
arr.fill_value = 3.1
assert arr.fill_value == 3.1
# msg = "unable to set fill_value nan to int64 dtype"
# with pytest.raises(ValueError, match=msg):
arr.fill_value = np.nan
assert np.isnan(arr.fill_value)
arr = SparseArray([True, False, True],
fill_value=False,
dtype=np.bool_)
arr.fill_value = True
assert arr.fill_value
# coerces to bool
# msg = "unable to set fill_value 0 to bool dtype"
# with pytest.raises(ValueError, match=msg):
arr.fill_value = 0
assert arr.fill_value == 0
# msg = "unable to set fill_value nan to bool dtype"
# with pytest.raises(ValueError, match=msg):
arr.fill_value = np.nan
assert np.isnan(arr.fill_value)
@pytest.mark.parametrize("val", [[1, 2, 3], np.array([1, 2]), (1, 2, 3)])
def test_set_fill_invalid_non_scalar(self, val):
arr = SparseArray([True, False, True],
fill_value=False,
dtype=np.bool_)
msg = "fill_value must be a scalar"
with pytest.raises(ValueError, match=msg):
arr.fill_value = val
def test_copy(self):
arr2 = self.arr.copy()
assert arr2.sp_values is not self.arr.sp_values
assert arr2.sp_index is self.arr.sp_index
def test_values_asarray(self):
tm.assert_almost_equal(self.arr.to_dense(), self.arr_data)
@pytest.mark.parametrize(
"data,shape,dtype",
[
([0, 0, 0, 0, 0], (5, ), None),
([], (0, ), None),
([0], (1, ), None),
(["A", "A", np.nan, "B"], (4, ), object),
],
)
def test_shape(self, data, shape, dtype):
# GH 21126
out = SparseArray(data, dtype=dtype)
assert out.shape == shape
@pytest.mark.parametrize(
"vals",
[
[np.nan, np.nan, np.nan, np.nan, np.nan],
[1, np.nan, np.nan, 3, np.nan],
[1, np.nan, 0, 3, 0],
],
)
@pytest.mark.parametrize("fill_value", [None, 0])
def test_dense_repr(self, vals, fill_value):
vals = np.array(vals)
arr = SparseArray(vals, fill_value=fill_value)
res = arr.to_dense()
tm.assert_numpy_array_equal(res, vals)
res2 = arr._internal_get_values()
tm.assert_numpy_array_equal(res2, vals)
def test_getitem(self):
def _checkit(i):
tm.assert_almost_equal(self.arr[i], self.arr.to_dense()[i])
for i in range(len(self.arr)):
_checkit(i)
_checkit(-i)
def test_getitem_arraylike_mask(self):
arr = SparseArray([0, 1, 2])
result = arr[[True, False, True]]
expected = SparseArray([0, 2])
tm.assert_sp_array_equal(result, expected)
def test_getslice(self):
result = self.arr[:-3]
exp = SparseArray(self.arr.to_dense()[:-3])
tm.assert_sp_array_equal(result, exp)
result = self.arr[-4:]
exp = SparseArray(self.arr.to_dense()[-4:])
tm.assert_sp_array_equal(result, exp)
# two corner cases from Series
result = self.arr[-12:]
exp = SparseArray(self.arr)
tm.assert_sp_array_equal(result, exp)
result = self.arr[:-12]
exp = SparseArray(self.arr.to_dense()[:0])
tm.assert_sp_array_equal(result, exp)
def test_getslice_tuple(self):
dense = np.array([np.nan, 0, 3, 4, 0, 5, np.nan, np.nan, 0])
sparse = SparseArray(dense)
res = sparse[(slice(4, None), )]
exp = SparseArray(dense[4:])
tm.assert_sp_array_equal(res, exp)
sparse = SparseArray(dense, fill_value=0)
res = sparse[(slice(4, None), )]
exp = SparseArray(dense[4:], fill_value=0)
tm.assert_sp_array_equal(res, exp)
msg = "too many indices for array"
with pytest.raises(IndexError, match=msg):
sparse[4:, :]
with pytest.raises(IndexError, match=msg):
# check numpy compat
dense[4:, :]
def test_boolean_slice_empty(self):
arr = SparseArray([0, 1, 2])
res = arr[[False, False, False]]
assert res.dtype == arr.dtype
@pytest.mark.parametrize(
"op", ["add", "sub", "mul", "truediv", "floordiv", "pow"])
def test_binary_operators(self, op):
op = getattr(operator, op)
data1 = np.random.randn(20)
data2 = np.random.randn(20)
data1[::2] = np.nan
data2[::3] = np.nan
arr1 = SparseArray(data1)
arr2 = SparseArray(data2)
data1[::2] = 3
data2[::3] = 3
farr1 = SparseArray(data1, fill_value=3)
farr2 = SparseArray(data2, fill_value=3)
def _check_op(op, first, second):
res = op(first, second)
exp = SparseArray(op(first.to_dense(), second.to_dense()),
fill_value=first.fill_value)
assert isinstance(res, SparseArray)
tm.assert_almost_equal(res.to_dense(), exp.to_dense())
res2 = op(first, second.to_dense())
assert isinstance(res2, SparseArray)
tm.assert_sp_array_equal(res, res2)
res3 = op(first.to_dense(), second)
assert isinstance(res3, SparseArray)
tm.assert_sp_array_equal(res, res3)
res4 = op(first, 4)
assert isinstance(res4, SparseArray)
# Ignore this if the actual op raises (e.g. pow).
try:
exp = op(first.to_dense(), 4)
exp_fv = op(first.fill_value, 4)
except ValueError:
pass
else:
tm.assert_almost_equal(res4.fill_value, exp_fv)
tm.assert_almost_equal(res4.to_dense(), exp)
with np.errstate(all="ignore"):
for first_arr, second_arr in [(arr1, arr2), (farr1, farr2)]:
_check_op(op, first_arr, second_arr)
def test_pickle(self):
def _check_roundtrip(obj):
unpickled = tm.round_trip_pickle(obj)
tm.assert_sp_array_equal(unpickled, obj)
_check_roundtrip(self.arr)
_check_roundtrip(self.zarr)
def test_generator_warnings(self):
sp_arr = SparseArray([1, 2, 3])
with warnings.catch_warnings(record=True) as w:
warnings.filterwarnings(action="always",
category=DeprecationWarning)
warnings.filterwarnings(action="always",
category=PendingDeprecationWarning)
for _ in sp_arr:
pass
assert len(w) == 0
def test_fillna(self):
s = SparseArray([1, np.nan, np.nan, 3, np.nan])
res = s.fillna(-1)
exp = SparseArray([1, -1, -1, 3, -1], fill_value=-1, dtype=np.float64)
tm.assert_sp_array_equal(res, exp)
s = SparseArray([1, np.nan, np.nan, 3, np.nan], fill_value=0)
res = s.fillna(-1)
exp = SparseArray([1, -1, -1, 3, -1], fill_value=0, dtype=np.float64)
tm.assert_sp_array_equal(res, exp)
s = SparseArray([1, np.nan, 0, 3, 0])
res = s.fillna(-1)
exp = SparseArray([1, -1, 0, 3, 0], fill_value=-1, dtype=np.float64)
tm.assert_sp_array_equal(res, exp)
s = SparseArray([1, np.nan, 0, 3, 0], fill_value=0)
res = s.fillna(-1)
exp = SparseArray([1, -1, 0, 3, 0], fill_value=0, dtype=np.float64)
tm.assert_sp_array_equal(res, exp)
s = SparseArray([np.nan, np.nan, np.nan, np.nan])
res = s.fillna(-1)
exp = SparseArray([-1, -1, -1, -1], fill_value=-1, dtype=np.float64)
tm.assert_sp_array_equal(res, exp)
s = SparseArray([np.nan, np.nan, np.nan, np.nan], fill_value=0)
res = s.fillna(-1)
exp = SparseArray([-1, -1, -1, -1], fill_value=0, dtype=np.float64)
tm.assert_sp_array_equal(res, exp)
# float dtype's fill_value is np.nan, replaced by -1
s = SparseArray([0.0, 0.0, 0.0, 0.0])
res = s.fillna(-1)
exp = SparseArray([0.0, 0.0, 0.0, 0.0], fill_value=-1)
tm.assert_sp_array_equal(res, exp)
# int dtype shouldn't have missing. No changes.
s = SparseArray([0, 0, 0, 0])
assert s.dtype == SparseDtype(np.int64)
assert s.fill_value == 0
res = s.fillna(-1)
tm.assert_sp_array_equal(res, s)
s = SparseArray([0, 0, 0, 0], fill_value=0)
assert s.dtype == SparseDtype(np.int64)
assert s.fill_value == 0
res = s.fillna(-1)
exp = SparseArray([0, 0, 0, 0], fill_value=0)
tm.assert_sp_array_equal(res, exp)
# fill_value can be nan if there is no missing hole.
# only fill_value will be changed
s = SparseArray([0, 0, 0, 0], fill_value=np.nan)
assert s.dtype == SparseDtype(np.int64, fill_value=np.nan)
assert np.isnan(s.fill_value)
res = s.fillna(-1)
exp = SparseArray([0, 0, 0, 0], fill_value=-1)
tm.assert_sp_array_equal(res, exp)
def test_fillna_overlap(self):
s = SparseArray([1, np.nan, np.nan, 3, np.nan])
# filling with existing value doesn't replace existing value with
# fill_value, i.e. existing 3 remains in sp_values
res = s.fillna(3)
exp = np.array([1, 3, 3, 3, 3], dtype=np.float64)
tm.assert_numpy_array_equal(res.to_dense(), exp)
s = SparseArray([1, np.nan, np.nan, 3, np.nan], fill_value=0)
res = s.fillna(3)
exp = SparseArray([1, 3, 3, 3, 3], fill_value=0, dtype=np.float64)
tm.assert_sp_array_equal(res, exp)
def test_nonzero(self):
# Tests regression #21172.
sa = SparseArray(
[float("nan"),
float("nan"), 1, 0, 0, 2, 0, 0, 0, 3, 0, 0])
expected = np.array([2, 5, 9], dtype=np.int32)
(result, ) = sa.nonzero()
tm.assert_numpy_array_equal(expected, result)
sa = SparseArray([0, 0, 1, 0, 0, 2, 0, 0, 0, 3, 0, 0])
(result, ) = sa.nonzero()
tm.assert_numpy_array_equal(expected, result)
def test_set_fill_value(self):
arr = SparseArray([1.0, np.nan, 2.0], fill_value=np.nan)
arr.fill_value = 2
assert arr.fill_value == 2
arr = SparseArray([1, 0, 2], fill_value=0, dtype=np.int64)
arr.fill_value = 2
assert arr.fill_value == 2
# XXX: this seems fine? You can construct an integer
# sparsearray with NaN fill value, why not update one?
# coerces to int
# msg = "unable to set fill_value 3\\.1 to int64 dtype"
# with pytest.raises(ValueError, match=msg):
arr.fill_value = 3.1
assert arr.fill_value == 3.1
# msg = "unable to set fill_value nan to int64 dtype"
# with pytest.raises(ValueError, match=msg):
arr.fill_value = np.nan
assert np.isnan(arr.fill_value)
arr = SparseArray([True, False, True],
fill_value=False,
dtype=np.bool_)
arr.fill_value = True
assert arr.fill_value
# coerces to bool
# msg = "unable to set fill_value 0 to bool dtype"
# with pytest.raises(ValueError, match=msg):
arr.fill_value = 0
assert arr.fill_value == 0
# msg = "unable to set fill_value nan to bool dtype"
# with pytest.raises(ValueError, match=msg):
arr.fill_value = np.nan
assert np.isnan(arr.fill_value)
def setup_method(self, method):
self.arr_data = np.array(
[np.nan, np.nan, 1, 2, 3, np.nan, 4, 5, np.nan, 6])
self.arr = SparseArray(self.arr_data)
self.zarr = SparseArray([0, 0, 1, 2, 3, 0, 4, 5, 0, 6], fill_value=0)
def test_constructor_sparse_dtype(self):
result = SparseArray([1, 0, 0, 1], dtype=SparseDtype("int64", -1))
expected = SparseArray([1, 0, 0, 1], fill_value=-1, dtype=np.int64)
tm.assert_sp_array_equal(result, expected)
assert result.sp_values.dtype == np.dtype("int64")
def test_take(self):
exp = SparseArray(np.take(self.arr_data, [2, 3]))
tm.assert_sp_array_equal(self.arr.take([2, 3]), exp)
exp = SparseArray(np.take(self.arr_data, [0, 1, 2]))
tm.assert_sp_array_equal(self.arr.take([0, 1, 2]), exp)
def test_getitem_arraylike_mask(self):
arr = SparseArray([0, 1, 2])
result = arr[[True, False, True]]
expected = SparseArray([0, 2])
tm.assert_sp_array_equal(result, expected)
def test_take_negative(self):
exp = SparseArray(np.take(self.arr_data, [-1]))
tm.assert_sp_array_equal(self.arr.take([-1]), exp)
exp = SparseArray(np.take(self.arr_data, [-4, -3, -2]))
tm.assert_sp_array_equal(self.arr.take([-4, -3, -2]), exp)
def test_boolean_slice_empty(self):
arr = SparseArray([0, 1, 2])
res = arr[[False, False, False]]
assert res.dtype == arr.dtype
def test_constructor_from_too_large_array(self):
with pytest.raises(TypeError, match="expected dimension <= 1 data"):
SparseArray(np.arange(10).reshape((2, 5)))
class TestSparseArrayAnalytics:
@pytest.mark.parametrize(
"data,pos,neg",
[
([True, True, True], True, False),
([1, 2, 1], 1, 0),
([1.0, 2.0, 1.0], 1.0, 0.0),
],
)
def test_all(self, data, pos, neg):
# GH 17570
out = SparseArray(data).all()
assert out
out = SparseArray(data, fill_value=pos).all()
assert out
data[1] = neg
out = SparseArray(data).all()
assert not out
out = SparseArray(data, fill_value=pos).all()
assert not out
@pytest.mark.parametrize(
"data,pos,neg",
[
([True, True, True], True, False),
([1, 2, 1], 1, 0),
([1.0, 2.0, 1.0], 1.0, 0.0),
],
)
def test_numpy_all(self, data, pos, neg):
# GH 17570
out = np.all(SparseArray(data))
assert out
out = np.all(SparseArray(data, fill_value=pos))
assert out
data[1] = neg
out = np.all(SparseArray(data))
assert not out
out = np.all(SparseArray(data, fill_value=pos))
assert not out
# raises with a different message on py2.
msg = "the 'out' parameter is not supported"
with pytest.raises(ValueError, match=msg):
np.all(SparseArray(data), out=np.array([]))
@pytest.mark.parametrize(
"data,pos,neg",
[
([False, True, False], True, False),
([0, 2, 0], 2, 0),
([0.0, 2.0, 0.0], 2.0, 0.0),
],
)
def test_any(self, data, pos, neg):
# GH 17570
out = SparseArray(data).any()
assert out
out = SparseArray(data, fill_value=pos).any()
assert out
data[1] = neg
out = SparseArray(data).any()
assert not out
out = SparseArray(data, fill_value=pos).any()
assert not out
@pytest.mark.parametrize(
"data,pos,neg",
[
([False, True, False], True, False),
([0, 2, 0], 2, 0),
([0.0, 2.0, 0.0], 2.0, 0.0),
],
)
def test_numpy_any(self, data, pos, neg):
# GH 17570
out = np.any(SparseArray(data))
assert out
out = np.any(SparseArray(data, fill_value=pos))
assert out
data[1] = neg
out = np.any(SparseArray(data))
assert not out
out = np.any(SparseArray(data, fill_value=pos))
assert not out
msg = "the 'out' parameter is not supported"
with pytest.raises(ValueError, match=msg):
np.any(SparseArray(data), out=out)
def test_sum(self):
data = np.arange(10).astype(float)
out = SparseArray(data).sum()
assert out == 45.0
data[5] = np.nan
out = SparseArray(data, fill_value=2).sum()
assert out == 40.0
out = SparseArray(data, fill_value=np.nan).sum()
assert out == 40.0
@pytest.mark.parametrize(
"arr",
[
np.array([0, 1, np.nan, 1]),
np.array([0, 1, 1]),
np.array([True, True, False]),
],
)
@pytest.mark.parametrize("fill_value", [0, 1, np.nan, True, False])
@pytest.mark.parametrize("min_count, expected", [(3, 2), (4, np.nan)])
def test_sum_min_count(self, arr, fill_value, min_count, expected):
# https://github.com/pandas-dev/pandas/issues/25777
sparray = SparseArray(arr, fill_value=fill_value)
result = sparray.sum(min_count=min_count)
if np.isnan(expected):
assert np.isnan(result)
else:
assert result == expected
def test_numpy_sum(self):
data = np.arange(10).astype(float)
out = np.sum(SparseArray(data))
assert out == 45.0
data[5] = np.nan
out = np.sum(SparseArray(data, fill_value=2))
assert out == 40.0
out = np.sum(SparseArray(data, fill_value=np.nan))
assert out == 40.0
msg = "the 'dtype' parameter is not supported"
with pytest.raises(ValueError, match=msg):
np.sum(SparseArray(data), dtype=np.int64)
msg = "the 'out' parameter is not supported"
with pytest.raises(ValueError, match=msg):
np.sum(SparseArray(data), out=out)
@pytest.mark.parametrize(
"data,expected",
[
(
np.array([1, 2, 3, 4, 5], dtype=float), # non-null data
SparseArray(np.array([1.0, 3.0, 6.0, 10.0, 15.0])),
),
(
np.array([1, 2, np.nan, 4, 5], dtype=float), # null data
SparseArray(np.array([1.0, 3.0, np.nan, 7.0, 12.0])),
),
],
)
@pytest.mark.parametrize("numpy", [True, False])
def test_cumsum(self, data, expected, numpy):
cumsum = np.cumsum if numpy else lambda s: s.cumsum()
out = cumsum(SparseArray(data))
tm.assert_sp_array_equal(out, expected)
out = cumsum(SparseArray(data, fill_value=np.nan))
tm.assert_sp_array_equal(out, expected)
out = cumsum(SparseArray(data, fill_value=2))
tm.assert_sp_array_equal(out, expected)
if numpy: # numpy compatibility checks.
msg = "the 'dtype' parameter is not supported"
with pytest.raises(ValueError, match=msg):
np.cumsum(SparseArray(data), dtype=np.int64)
msg = "the 'out' parameter is not supported"
with pytest.raises(ValueError, match=msg):
np.cumsum(SparseArray(data), out=out)
else:
axis = 1 # SparseArray currently 1-D, so only axis = 0 is valid.
msg = re.escape(f"axis(={axis}) out of bounds")
with pytest.raises(ValueError, match=msg):
SparseArray(data).cumsum(axis=axis)
def test_mean(self):
data = np.arange(10).astype(float)
out = SparseArray(data).mean()
assert out == 4.5
data[5] = np.nan
out = SparseArray(data).mean()
assert out == 40.0 / 9
def test_numpy_mean(self):
data = np.arange(10).astype(float)
out = np.mean(SparseArray(data))
assert out == 4.5
data[5] = np.nan
out = np.mean(SparseArray(data))
assert out == 40.0 / 9
msg = "the 'dtype' parameter is not supported"
with pytest.raises(ValueError, match=msg):
np.mean(SparseArray(data), dtype=np.int64)
msg = "the 'out' parameter is not supported"
with pytest.raises(ValueError, match=msg):
np.mean(SparseArray(data), out=out)
def test_ufunc(self):
# GH 13853 make sure ufunc is applied to fill_value
sparse = SparseArray([1, np.nan, 2, np.nan, -2])
result = SparseArray([1, np.nan, 2, np.nan, 2])
tm.assert_sp_array_equal(abs(sparse), result)
tm.assert_sp_array_equal(np.abs(sparse), result)
sparse = SparseArray([1, -1, 2, -2], fill_value=1)
result = SparseArray([1, 2, 2],
sparse_index=sparse.sp_index,
fill_value=1)
tm.assert_sp_array_equal(abs(sparse), result)
tm.assert_sp_array_equal(np.abs(sparse), result)
sparse = SparseArray([1, -1, 2, -2], fill_value=-1)
result = SparseArray([1, 2, 2],
sparse_index=sparse.sp_index,
fill_value=1)
tm.assert_sp_array_equal(abs(sparse), result)
tm.assert_sp_array_equal(np.abs(sparse), result)
sparse = SparseArray([1, np.nan, 2, np.nan, -2])
result = SparseArray(np.sin([1, np.nan, 2, np.nan, -2]))
tm.assert_sp_array_equal(np.sin(sparse), result)
sparse = SparseArray([1, -1, 2, -2], fill_value=1)
result = SparseArray(np.sin([1, -1, 2, -2]), fill_value=np.sin(1))
tm.assert_sp_array_equal(np.sin(sparse), result)
sparse = SparseArray([1, -1, 0, -2], fill_value=0)
result = SparseArray(np.sin([1, -1, 0, -2]), fill_value=np.sin(0))
tm.assert_sp_array_equal(np.sin(sparse), result)
def test_ufunc_args(self):
# GH 13853 make sure ufunc is applied to fill_value, including its arg
sparse = SparseArray([1, np.nan, 2, np.nan, -2])
result = SparseArray([2, np.nan, 3, np.nan, -1])
tm.assert_sp_array_equal(np.add(sparse, 1), result)
sparse = SparseArray([1, -1, 2, -2], fill_value=1)
result = SparseArray([2, 0, 3, -1], fill_value=2)
tm.assert_sp_array_equal(np.add(sparse, 1), result)
sparse = SparseArray([1, -1, 0, -2], fill_value=0)
result = SparseArray([2, 0, 1, -1], fill_value=1)
tm.assert_sp_array_equal(np.add(sparse, 1), result)
@pytest.mark.parametrize("fill_value", [0.0, np.nan])
def test_modf(self, fill_value):
# https://github.com/pandas-dev/pandas/issues/26946
sparse = SparseArray([fill_value] * 10 + [1.1, 2.2],
fill_value=fill_value)
r1, r2 = np.modf(sparse)
e1, e2 = np.modf(np.asarray(sparse))
tm.assert_sp_array_equal(r1, SparseArray(e1, fill_value=fill_value))
tm.assert_sp_array_equal(r2, SparseArray(e2, fill_value=fill_value))
def test_nbytes_integer(self):
arr = SparseArray([1, 0, 0, 0, 2], kind="integer")
result = arr.nbytes
# (2 * 8) + 2 * 4
assert result == 24
def test_nbytes_block(self):
arr = SparseArray([1, 2, 0, 0, 0], kind="block")
result = arr.nbytes
# (2 * 8) + 4 + 4
# sp_values, blocs, blengths
assert result == 24
def test_asarray_datetime64(self):
s = SparseArray(pd.to_datetime(["2012", None, None, "2013"]))
np.asarray(s)
def test_density(self):
arr = SparseArray([0, 1])
assert arr.density == 0.5
def test_npoints(self):
arr = SparseArray([0, 1])
assert arr.npoints == 1
def test_constructor_from_sparse(self):
res = SparseArray(self.zarr)
assert res.fill_value == 0
tm.assert_almost_equal(res.sp_values, self.zarr.sp_values)
result = arr.__add__(df)
assert result is NotImplemented
def test_with_zerodim_ndarray():
# GH#27910
arr = SparseArray([0, 1], fill_value=0)
result = arr * np.array(2)
expected = arr * 2
tm.assert_sp_array_equal(result, expected)
@pytest.mark.parametrize("ufunc", [np.abs, np.exp])
@pytest.mark.parametrize(
"arr", [SparseArray([0, 0, -1, 1]),
SparseArray([None, None, -1, 1])])
def test_ufuncs(ufunc, arr):
result = ufunc(arr)
fill_value = ufunc(arr.fill_value)
expected = SparseArray(ufunc(np.asarray(arr)), fill_value=fill_value)
tm.assert_sp_array_equal(result, expected)
@pytest.mark.parametrize(
"a, b",
[
(SparseArray([0, 0, 0]), np.array([0, 1, 2])),
(SparseArray([0, 0, 0], fill_value=1), np.array([0, 1, 2])),
(SparseArray([0, 0, 0], fill_value=1), np.array([0, 1, 2])),
(SparseArray([0, 0, 0], fill_value=1), np.array([0, 1, 2])),
def test_astype(self):
# float -> float
arr = SparseArray([None, None, 0, 2])
result = arr.astype("Sparse[float32]")
expected = SparseArray([None, None, 0, 2], dtype=np.dtype("float32"))
tm.assert_sp_array_equal(result, expected)
dtype = SparseDtype("float64", fill_value=0)
result = arr.astype(dtype)
expected = SparseArray._simple_new(
np.array([0.0, 2.0], dtype=dtype.subtype), IntIndex(4, [2, 3]),
dtype)
tm.assert_sp_array_equal(result, expected)
dtype = SparseDtype("int64", 0)
result = arr.astype(dtype)
expected = SparseArray._simple_new(np.array([0, 2], dtype=np.int64),
IntIndex(4, [2, 3]), dtype)
tm.assert_sp_array_equal(result, expected)
arr = SparseArray([0, np.nan, 0, 1], fill_value=0)
with pytest.raises(ValueError, match="NA"):
arr.astype("Sparse[i8]")
def test_with_dataframe():
# GH#27910
arr = SparseArray([0, 1], fill_value=0)
df = pd.DataFrame([[1, 2], [3, 4]])
result = arr.__add__(df)
assert result is NotImplemented
def test_nbytes_integer(self):
arr = SparseArray([1, 0, 0, 0, 2], kind="integer")
result = arr.nbytes
# (2 * 8) + 2 * 4
assert result == 24
