def update_object_from_edit_points(self, obj, node_idx, v, alt_edit_mode=0):
"""Update the object from modified Draft_Edit point.
No need to recompute at the end.
Parameters:
obj: the object
node_idx: number of the edited node
v: target vector of the node in object local coordinates system
alt_edit_mode: alternative edit mode to perform different operations
(usually can be selected from the Draft_Edit context menu)
default = 0
"""
if alt_edit_mode == 0:
# trim/extend endpoint
if node_idx == 0:
obj.Proxy.set_first_point(obj, v, local=True)
elif node_idx == 1:
obj.Proxy.set_last_point(obj, v, local=True)
elif alt_edit_mode == 1:
# rotate wall on the opposite endpoint (context menu "align")
import Draft
global_v = obj.getGlobalPlacement().multVec(v)
p1 = obj.Proxy.get_first_point(obj)
p2 = obj.Proxy.get_last_point(obj)
if node_idx == 0:
current_angle = DraftVecUtils.angle(App.Vector(1,0,0), p1.sub(p2))
new_angle = DraftVecUtils.angle(App.Vector(1,0,0), global_v.sub(p2))
Draft.rotate(obj, math.degrees(new_angle - current_angle), p2)
# obj.Proxy.set_first_point(obj, global_v) # this causes frequent hard crashes, probably to delay
elif node_idx == 1:
current_angle = DraftVecUtils.angle(App.Vector(1,0,0), p2.sub(p1))
new_angle = DraftVecUtils.angle(App.Vector(1,0,0), global_v.sub(p1))
Draft.rotate(obj, math.degrees(new_angle - current_angle), p1)
def createObject(self):
"""Create the final object in the current document."""
plane = App.DraftWorkingPlane
p1 = self.node[0]
p3 = self.node[-1]
diagonal = p3.sub(p1)
p2 = p1.add(DraftVecUtils.project(diagonal, plane.v))
p4 = p1.add(DraftVecUtils.project(diagonal, plane.u))
length = p4.sub(p1).Length
if abs(DraftVecUtils.angle(p4.sub(p1), plane.u, plane.axis)) > 1:
length = -length
height = p2.sub(p1).Length
if abs(DraftVecUtils.angle(p2.sub(p1), plane.v, plane.axis)) > 1:
height = -height
try:
# The command to run is built as a series of text strings
# to be committed through the `draftutils.todo.ToDo` class.
rot, sup, pts, fil = self.getStrings()
base = p1
if length < 0:
length = -length
base = base.add((p1.sub(p4)).negative())
if height < 0:
height = -height
base = base.add((p1.sub(p2)).negative())
Gui.addModule("Draft")
if utils.getParam("UsePartPrimitives", False):
# Insert a Part::Primitive object
_cmd = 'FreeCAD.ActiveDocument.'
_cmd += 'addObject("Part::Plane", "Plane")'
_cmd_list = [
'plane = ' + _cmd, 'plane.Length = ' + str(length),
'plane.Width = ' + str(height), 'pl = FreeCAD.Placement()',
'pl.Rotation.Q=' + rot,
'pl.Base = ' + DraftVecUtils.toString(base),
'plane.Placement = pl', 'Draft.autogroup(plane)',
'FreeCAD.ActiveDocument.recompute()'
]
self.commit(translate("draft", "Create Plane"), _cmd_list)
else:
_cmd = 'Draft.makeRectangle'
_cmd += '('
_cmd += 'length=' + str(length) + ', '
_cmd += 'height=' + str(height) + ', '
_cmd += 'placement=pl, '
_cmd += 'face=' + fil + ', '
_cmd += 'support=' + sup
_cmd += ')'
_cmd_list = [
'pl = FreeCAD.Placement()', 'pl.Rotation.Q = ' + rot,
'pl.Base = ' + DraftVecUtils.toString(base),
'rec = ' + _cmd, 'Draft.autogroup(rec)',
'FreeCAD.ActiveDocument.recompute()'
]
self.commit(translate("draft", "Create Rectangle"), _cmd_list)
except Exception:
_err("Draft: error delaying commit")
self.finish(cont=True)
def create(self):
"""Create the actual object."""
if len(self.node) == 3:
targetpoint = self.node[0]
basepoint = self.node[2]
v = self.node[2].sub(self.node[1])
dist = v.Length
if hasattr(App, "DraftWorkingPlane"):
h = App.DraftWorkingPlane.u
n = App.DraftWorkingPlane.axis
r = App.DraftWorkingPlane.getRotation().Rotation
else:
h = App.Vector(1, 0, 0)
n = App.Vector(0, 0, 1)
r = App.Rotation()
if abs(DraftVecUtils.angle(v, h, n)) <= math.pi / 4:
direction = "Horizontal"
dist = -dist
elif abs(DraftVecUtils.angle(v, h, n)) >= math.pi * 3 / 4:
direction = "Horizontal"
elif DraftVecUtils.angle(v, h, n) > 0:
direction = "Vertical"
else:
direction = "Vertical"
dist = -dist
tp = "targetpoint=FreeCAD." + str(targetpoint) + ", "
sel = ""
if self.sel:
if self.sel.SubElementNames:
sub = "'" + self.sel.SubElementNames[0] + "'"
else:
sub = "()"
sel = "target="
sel += "("
sel += "FreeCAD.ActiveDocument." + self.sel.Object.Name + ", "
sel += sub
sel += "),"
pl = "placement=FreeCAD.Placement"
pl += "("
pl += "FreeCAD." + str(basepoint) + ", "
pl += "FreeCAD.Rotation" + str(r.Q)
pl += ")"
App.ActiveDocument.openTransaction("Create Label")
Gui.addModule("Draft")
_cmd = "Draft.makeLabel"
_cmd += "("
_cmd += tp
_cmd += sel
_cmd += "direction='" + direction + "', "
_cmd += "distance=" + str(dist) + ", "
_cmd += "labeltype='" + self.labeltype + "', "
_cmd += pl
_cmd += ")"
Gui.doCommand("l = " + _cmd)
Gui.doCommand("Draft.autogroup(l)")
App.ActiveDocument.recompute()
App.ActiveDocument.commitTransaction()
self.finish()
def measure_two_obj_angles(link_sub_1, link_sub_2):
"""Measure two edges from two different objects to measure the angle.
This function is a prototype because it does not determine all possible
starting and ending angles that could be used to draw the dimension line,
which is a circular arc.
Parameters
----------
link_sub_1: tuple
A tuple containing one object and a list of subelement strings,
which may be empty. Only the first subelement is considered, which
must be an edge.
::
link_sub_1 = (obj1, ['EdgeN', ...])
link_sub_2: tuple
Same.
"""
start = 0
end = 0
obj1 = link_sub_1[0]
lsub1 = link_sub_1[1]
obj2 = link_sub_2[0]
lsub2 = link_sub_2[1]
# The subelement list may be empty so we test it first
# and pick only the first item
if lsub1 and lsub2:
subelement1 = lsub1[0]
subelement2 = lsub2[0]
if "Edge" in subelement1 and "Edge" in subelement2:
n1 = int(subelement1[4:]) - 1
n2 = int(subelement2[4:]) - 1
start = obj1.Shape.Edges[n1].Curve.Direction
end = obj2.Shape.Edges[n2].Curve.Direction
# We get the angle from the direction of the line to the U axis
# of the working plane; we should be able to also use the V axis
start_r = DraftVecUtils.angle(start, App.DraftWorkingPlane.u)
end_r = DraftVecUtils.angle(end, App.DraftWorkingPlane.u)
start = math.degrees(start_r)
end = math.degrees(end_r)
# We make the angle positive because when tested, some errors
# were produced in the code that calculates the 'Angle'.
# This code is actually inside the viewprovider.
if start < 0:
start = abs(start)
if end < 0:
end = abs(end)
return start, end
def getCurveSet(ent):
result = []
if ent.is_a() in ["IfcGeometricCurveSet", "IfcGeometricSet"]:
elts = ent.Elements
elif ent.is_a() in [
"IfcLine", "IfcPolyline", "IfcCircle", "IfcTrimmedCurve"
]:
elts = [ent]
for el in elts:
if el.is_a("IfcPolyline"):
result.append(getPolyline(el))
elif el.is_a("IfcLine"):
result.append(getLine(el))
elif el.is_a("IfcCircle"):
result.append(getCircle(el))
elif el.is_a("IfcTrimmedCurve"):
base = el.BasisCurve
t1 = el.Trim1[0].wrappedValue
t2 = el.Trim2[0].wrappedValue
if not el.SenseAgreement:
t1, t2 = t2, t1
if base.is_a("IfcPolyline"):
bc = getPolyline(base)
result.append(bc)
elif base.is_a("IfcCircle"):
bc = getCircle(base)
e = Part.ArcOfCircle(bc.Curve, math.radians(t1),
math.radians(t2)).toShape()
d = base.Position.RefDirection.DirectionRatios
v = FreeCAD.Vector(d[0], d[1], d[2] if len(d) > 2 else 0)
a = -DraftVecUtils.angle(v)
e.rotate(bc.Curve.Center, FreeCAD.Vector(0, 0, 1),
math.degrees(a))
result.append(e)
elif el.is_a("IfcCompositeCurve"):
for base in el.Segments:
if base.ParentCurve.is_a("IfcPolyline"):
bc = getPolyline(base.ParentCurve)
result.append(bc)
elif base.ParentCurve.is_a("IfcCircle"):
bc = getCircle(base.ParentCurve)
e = Part.ArcOfCircle(bc.Curve, math.radians(t1),
math.radians(t2)).toShape()
d = base.Position.RefDirection.DirectionRatios
v = FreeCAD.Vector(d[0], d[1],
d[2] if len(d) > 2 else 0)
a = -DraftVecUtils.angle(v)
e.rotate(bc.Curve.Center, FreeCAD.Vector(0, 0, 1),
math.degrees(a))
result.append(e)
return result
def get_perpendicular_tuples(faces):
listeCouple = []
lenfaces = len(faces)
faces.append(faces[0])
for n in range(lenfaces):
norm2 = faces[n + 1].normalAt(0, 0)
norm1 = faces[n].normalAt(0, 0)
norm0 = faces[n - 1].normalAt(0, 0)
if abs(round(math.degrees(DraftVecUtils.angle(norm1, norm0)))) == 90.0:
listeCouple.append([faces[n], faces[n - 1]])
if abs(round(math.degrees(DraftVecUtils.angle(norm1, norm2)))) == 90.0:
listeCouple.append([faces[n], faces[n + 1]])
return listeCouple
def getCoupleFacesEquerre(self, faces):
listeCouple = []
lenfaces = len(faces)
faces.append(faces[0])
for n in range(lenfaces):
norm2 = faces[n+1].normalAt(0,0)
norm1 = faces[n].normalAt(0,0)
norm0 = faces[n-1].normalAt(0,0)
if abs(round(math.degrees(DraftVecUtils.angle(norm1,norm0)))) == 90.:
listeCouple.append([faces[n],faces[n-1]])
if abs(round(math.degrees(DraftVecUtils.angle(norm1,norm2)))) == 90.:
listeCouple.append([faces[n],faces[n+1]])
return listeCouple
def handle_mouse_move_event(self, arg):
"""Handle the mouse when moving."""
plane = App.DraftWorkingPlane
for ghost in self.ghosts:
ghost.off()
self.point, ctrlPoint, info = gui_tool_utils.getPoint(self, arg)
# this is to make sure radius is what you see on screen
if self.center and DraftVecUtils.dist(self.point, self.center):
viewdelta = DraftVecUtils.project(self.point.sub(self.center),
plane.axis)
if not DraftVecUtils.isNull(viewdelta):
self.point = self.point.add(viewdelta.negative())
if self.extendedCopy:
if not gui_tool_utils.hasMod(arg, gui_tool_utils.MODALT):
self.step = 3
self.finish()
if self.step == 0:
pass
elif self.step == 1:
currentrad = DraftVecUtils.dist(self.point, self.center)
if currentrad != 0:
angle = DraftVecUtils.angle(plane.u,
self.point.sub(self.center),
plane.axis)
else:
angle = 0
self.ui.setRadiusValue(math.degrees(angle), unit="Angle")
self.firstangle = angle
self.ui.radiusValue.setFocus()
self.ui.radiusValue.selectAll()
elif self.step == 2:
currentrad = DraftVecUtils.dist(self.point, self.center)
if currentrad != 0:
angle = DraftVecUtils.angle(plane.u,
self.point.sub(self.center),
plane.axis)
else:
angle = 0
if angle < self.firstangle:
sweep = (2 * math.pi - self.firstangle) + angle
else:
sweep = angle - self.firstangle
self.arctrack.setApertureAngle(sweep)
for ghost in self.ghosts:
ghost.rotate(plane.axis, sweep)
ghost.on()
self.ui.setRadiusValue(math.degrees(sweep), 'Angle')
self.ui.radiusValue.setFocus()
self.ui.radiusValue.selectAll()
gui_tool_utils.redraw3DView()
def T_join(self, wall, target, idx):
""" Compute wall angles according to given parameters """
print("--------\n"+"T_Join "+wall.Name + " with " +target.Name+ "\n")
if idx == 0:
w1 = wall.Proxy.get_first_point(wall)
w2 = wall.Proxy.get_last_point(wall)
elif idx == 1:
w1 = wall.Proxy.get_last_point(wall)
w2 = wall.Proxy.get_first_point(wall)
t1 = target.Proxy.get_first_point(target)
t2 = target.Proxy.get_last_point(target)
angle = math.degrees(DraftVecUtils.angle(w2-w1,t2-t1))
# print(angle)
# identify if the function have to join the first or the end of the wall
if idx == 0:
wall.FirstCoreInnerAngle = angle
wall.FirstCoreOuterAngle = -angle
wall.FirstCoreOffset = - abs(target.Width / 2 / math.cos(math.pi / 2 - math.radians(angle)))
elif idx == 1:
wall.LastCoreInnerAngle = -angle
wall.LastCoreOuterAngle = angle
wall.LastCoreOffset = - abs(target.Width / 2 / math.cos(math.pi / 2 - math.radians(angle)))
if not wall.Name in target.IncomingTJoins:
target_list = target.IncomingTJoins
target_list.append(wall.Name)
target.IncomingTJoins = target_list
def getIncidentAngle(self, queue):
global currLocation
'''returns in the incident angle in radians between the current and previous moves'''
# get the vector of the last move
if queue[1].Name in arccommands:
print queue
print currLocation
arcLoc = FreeCAD.Base.Vector(queue[2].X + queue[1].I, queue[2].Y + queue[1].J, currLocation['Z'])
radvector = queue[1].Placement.Base.sub(arcLoc) # vector of chord from center to point
# vector of line perp to chord.
v1 = radvector.cross(FreeCAD.Base.Vector(0, 0, 1))
else:
v1 = queue[1].Placement.Base.sub(queue[2].Placement.Base)
# get the vector of the current move
if queue[0].Name in arccommands:
arcLoc = FreeCAD.Base.Vector((queue[1].x + queue[0].I), (queue[1].y + queue[0].J), currLocation['Z'])
radvector = queue[1].Placement.Base.sub(arcLoc) # calculate arcangle
v2 = radvector.cross(FreeCAD.Base.Vector(0, 0, 1))
# if switching between G2 and G3, reverse orientation
if queue[1].Name in arccommands:
if queue[0].Name != queue[1].Name:
v2 = D.rotate2D(v2, math.radians(180))
else:
v2 = queue[0].Placement.Base.sub(queue[1].Placement.Base)
incident_angle = D.angle(v1, v2, FreeCAD.Base.Vector(0, 0, -1))
return incident_angle
def orientEdge(edge, normal=None, make_arc=False):
"""Re-orient the edge such that it is in the XY plane.
Re-orients `edge` such that it is in the XY plane.
If `normal` is passed, this is used as the basis for the rotation,
otherwise the placement of `edge` is used.
"""
# This 'normalizes' the placement to the xy plane
edge = edge.copy()
xyDir = App.Vector(0, 0, 1)
base = App.Vector(0, 0, 0)
if normal:
angle = DraftVecUtils.angle(normal, xyDir) * App.Units.Radian
axis = normal.cross(xyDir)
else:
axis = edge.Placement.Rotation.Axis
angle = -1 * edge.Placement.Rotation.Angle * App.Units.Radian
if axis == App.Vector(0.0, 0.0, 0.0):
axis = App.Vector(0.0, 0.0, 1.0)
if angle:
edge.rotate(base, axis, angle)
if isinstance(edge.Curve, Part.Line):
return Part.LineSegment(edge.Curve, edge.FirstParameter,
edge.LastParameter)
elif make_arc and isinstance(edge.Curve, Part.Circle) and not edge.Closed:
return Part.ArcOfCircle(edge.Curve, edge.FirstParameter,
edge.LastParameter, edge.Curve.Axis.z > 0)
elif make_arc and isinstance(edge.Curve, Part.Ellipse) and not edge.Closed:
return Part.ArcOfEllipse(edge.Curve, edge.FirstParameter,
edge.LastParameter, edge.Curve.Axis.z > 0)
return edge.Curve
def getAngle(self, pt):
"returns the angle of a given vector"
c = self.trans.translation.getValue()
center = Vector(c[0], c[1], c[2])
base = FreeCAD.DraftWorkingPlane.u
rad = pt.sub(center)
return (DraftVecUtils.angle(rad, base, FreeCAD.DraftWorkingPlane.axis))
def getDeviation(self):
"""Return the angle between the u axis and the horizontal plane.
It defines a projection of `u` on the horizontal plane
(without a Z component), and then measures the angle between
this projection and `u`.
It also considers the cross product of the projection
and `u` to determine the sign of the angle.
Returns
-------
float
Angle between the `u` vector, and a projected vector
on the global horizontal plane.
See also
--------
DraftVecUtils.angle
"""
proj = Vector(self.u.x, self.u.y, 0)
if self.u.getAngle(proj) == 0:
return 0
else:
norm = proj.cross(self.u)
return DraftVecUtils.angle(self.u, proj, norm)
def makeWallFromPoints(p1,
p2,
width=None,
height=None,
align="Center",
name="Wall"):
'''makeWall([obj],[length],[width],[height],[align],[face],[name]): creates a wall based on the
given object, which can be a sketch, a draft object, a face or a solid, or no object at
all, then you must provide length, width and height. Align can be "Center","Left" or "Right",
face can be an index number of a face in the base object to base the wall on.'''
if not App.ActiveDocument:
App.Console.PrintError("No active document. Aborting\n")
return
# Add a Wall object to the docume
# TODO: verify if it's necessary to split this in 2 to have the 'if App.GuiUp:'
# guard for the viewprovider
obj = App.ActiveDocument.addObject('Part::FeaturePython', 'Wall', Wall(),
ViewProviderWall(), True)
# Align the wall to the given point
obj.Placement.Base = p1
length = p1.distanceToPoint(p2)
angle = DraftVecUtils.angle(p2 - p1, App.Vector(1, 0, 0))
obj.Placement.Rotation.Angle = -angle
obj.AxisLastPointX = length
# Set the wall properties
obj.Width = width
obj.Height = height
App.ActiveDocument.recompute()
return obj
def getRoundEdgeSVG(edge, view_plane, stroke_width, stroke_color):
"""getRoundEdgeSVG(Edge, ViewPlane, StrokeWidth, StrokeColor):
Returns round corner edge svg with given radius.
"""
p1 = getProjectionToSVGPlane(edge.Vertexes[0].Point, view_plane)
p2 = getProjectionToSVGPlane(edge.Vertexes[1].Point, view_plane)
t1 = edge.tangentAt(edge.FirstParameter)
t2 = edge.tangentAt(edge.FirstParameter +
(edge.LastParameter - edge.FirstParameter) / 10)
flag_sweep = int(DraftVecUtils.angle(t1, t2, view_plane.axis) < 0)
radius = edge.Curve.Radius
svg = ElementTree.Element("path")
svg.set("style", "stroke:{};fill:none".format(stroke_color))
svg.set(
"d",
"M{x1} {y1} A{radius} {radius} 0 0 {flag_sweep} {x2} {y2}".format(
x1=round(p1.x),
y1=round(p1.y),
x2=round(p2.x),
y2=round(p2.y),
radius=round(radius),
flag_sweep=flag_sweep,
),
)
svg.set("stroke-width", str(stroke_width))
svg.set("stroke", stroke_color)
return svg
def isClockwise(edge, ref=None):
"""Return True if a circle-based edge has a clockwise direction."""
if not geomType(edge) == "Circle":
return True
v1 = edge.Curve.tangent(edge.ParameterRange[0])[0]
if DraftVecUtils.isNull(v1):
return True
# we take an arbitrary other point on the edge that has little chances
# to be aligned with the first one
v2 = edge.Curve.tangent(edge.ParameterRange[0] + 0.01)[0]
n = edge.Curve.Axis
# if that axis points "the wrong way" from the reference, we invert it
if not ref:
ref = FreeCAD.Vector(0, 0, 1)
if n.getAngle(ref) > math.pi / 2:
n = n.negative()
if DraftVecUtils.angle(v1, v2, n) < 0:
return False
if n.z < 0:
return False
return True
def getAngle(self,pt):
"returns the angle of a given vector"
c = self.trans.translation.getValue()
center = Vector(c[0],c[1],c[2])
base = FreeCAD.DraftWorkingPlane.u
rad = pt.sub(center)
return(DraftVecUtils.angle(rad,base,FreeCAD.DraftWorkingPlane.axis))
def angleBisection(edge1, edge2):
"""Return an edge that bisects the angle between the 2 straight edges."""
if geomType(edge1) != "Line" or geomType(edge2) != "Line":
return None
p1 = edge1.Vertexes[0].Point
p2 = edge1.Vertexes[-1].Point
p3 = edge2.Vertexes[0].Point
p4 = edge2.Vertexes[-1].Point
intersect = findIntersection(edge1, edge2, True, True)
if intersect:
line1Dir = p2.sub(p1)
angleDiff = DraftVecUtils.angle(line1Dir, p4.sub(p3))
ang = angleDiff * 0.5
origin = intersect[0]
line1Dir.normalize()
direction = DraftVecUtils.rotate(line1Dir, ang)
else:
diff = p3.sub(p1)
origin = p1.add(diff.multiply(0.5))
direction = p2.sub(p1)
direction.normalize()
return Part.LineSegment(origin, origin.add(direction)).toShape()
def calcEdgeGeometry(self, edges, i):
self.profilsDico[i]["edge"] = edges[i]
vec = edges[i].Vertexes[-1].Point.sub(edges[i].Vertexes[0].Point)
self.profilsDico[i]["vec"] = vec
rot = math.degrees(DraftVecUtils.angle(vec))
self.profilsDico[i]["rot"] = rot
def isRoundCornerInSVG(edge, radius, view_plane, svg):
"""isRoundCornerInSVG(Edge, Radius, ViewPlane. SVG):
Returns True if svg corresponding to round corner edge is present in SVG
element, False otherwise.
"""
p1 = getProjectionToSVGPlane(edge.Vertexes[0].Point, view_plane)
p2 = getProjectionToSVGPlane(edge.Vertexes[1].Point, view_plane)
t1 = edge.tangentAt(edge.FirstParameter)
t2 = edge.tangentAt(edge.FirstParameter +
(edge.LastParameter - edge.FirstParameter) / 10)
flag_sweep = int(DraftVecUtils.angle(t1, t2, view_plane.axis) < 0)
if (svg.find(
'.//path[@d="M{x1} {y1} A{radius} {radius} 0 0 {flag_sweep} {x2} '
'{y2}"]'.format(
x1=round(p1.x),
y1=round(p1.y),
x2=round(p2.x),
y2=round(p2.y),
radius=round(radius),
flag_sweep=flag_sweep,
)) is not None):
return True
elif (svg.find(
'.//path[@d="M{x1} {y1} A{radius} {radius} 0 0 {flag_sweep} {x2} '
'{y2}"]'.format(
x1=round(p2.x),
y1=round(p2.y),
x2=round(p1.x),
y2=round(p1.y),
radius=round(radius),
flag_sweep=not flag_sweep,
)) is not None):
return True
else:
return False
def segmentAngleXY(self,
prevCommand,
currCommand,
endpos=False,
currentZ=0):
'''returns in the starting angle in radians for a Path command.
requires the previous command in order to calculate arcs correctly
if endpos = True, return the angle at the end of the segment.'''
global arccommands
if currCommand.Name in arccommands:
arcLoc = FreeCAD.Vector((prevCommand.x + currCommand.I),
(prevCommand.y + currCommand.J), currentZ)
if endpos is True:
radvector = arcLoc.sub(currCommand.Placement.Base
) #Calculate vector at start of arc
else:
radvector = arcLoc.sub(prevCommand.Placement.Base
) #Calculate vector at end of arc
v1 = radvector.cross(FreeCAD.Vector(0, 0, 1))
if currCommand.Name in ["G2", "G02"]:
v1 = D.rotate2D(v1, math.radians(180))
else:
v1 = currCommand.Placement.Base.sub(
prevCommand.Placement.Base) #Straight segments are easy
myAngle = D.angle(v1, FreeCAD.Base.Vector(1, 0, 0),
FreeCAD.Base.Vector(0, 0, -1))
return myAngle
def rotateSel(sel, n):
p = sel.Object.Placement
loc = sel.Object.Placement.Base
r = axis.cross(n) # rotation axis
a = DraftVecUtils.angle(n, axis, r) * 180 / math.pi
PathLog.debug("oh boy: (%.2f, %.2f, %.2f) -> %.2f" % (r.x, r.y, r.z, a))
Draft.rotate(sel.Object, a, axis=r)
def circleFrom2LinesRadius(edge1, edge2, radius):
"""Retun a list of circles from two edges and one radius.
It calculates 4 centers.
"""
intsec = findIntersection(edge1, edge2, True, True)
if not intsec:
return None
intsec = intsec[0]
bis12 = angleBisection(edge1, edge2)
bis21 = Part.LineSegment(bis12.Vertexes[0].Point,
DraftVecUtils.rotate(vec(bis12), math.pi/2.0))
ang12 = abs(DraftVecUtils.angle(vec(edge1), vec(edge2)))
ang21 = math.pi - ang12
dist12 = radius / math.sin(ang12 * 0.5)
dist21 = radius / math.sin(ang21 * 0.5)
circles = []
cen = App.Vector.add(intsec, vec(bis12).multiply(dist12))
circles.append(Part.Circle(cen, NORM, radius))
cen = App.Vector.add(intsec, vec(bis12).multiply(-dist12))
circles.append(Part.Circle(cen, NORM, radius))
cen = App.Vector.add(intsec, vec(bis21).multiply(dist21))
circles.append(Part.Circle(cen, NORM, radius))
cen = App.Vector.add(intsec, vec(bis21).multiply(-dist21))
circles.append(Part.Circle(cen, NORM, radius))
return circles
def calcEdgeGeometry(self, i, edge):
profilCurr = self.profilsDico[i]
profilCurr["edge"] = edge
vec = edge.Vertexes[1].Point.sub(edge.Vertexes[0].Point)
profilCurr["vec"] = vec
rot = math.degrees(DraftVecUtils.angle(vec))
profilCurr["rot"] = rot
def calcEdgeGeometry(self, edges, i):
self.profilsDico[i]["edge"] = edges[i]
vec = edges[i].Vertexes[-1].Point.sub(edges[i].Vertexes[0].Point)
self.profilsDico[i]["vec"] = vec
rot = math.degrees(DraftVecUtils.angle(vec))
self.profilsDico[i]["rot"] = rot
def lineExtension(self, obj, queue):
'''returns gcode for line extension'''
global currLocation
offset = float(obj.offset)
results = []
v1 = queue[1].Placement.Base.sub(queue[2].Placement.Base)
# extend the current segment to comp for offset
segAngle = D.angle(v1, FreeCAD.Base.Vector(1, 0, 0),
FreeCAD.Base.Vector(0, 0, -1))
xoffset = math.cos(segAngle) * offset
yoffset = math.sin(segAngle) * offset
newX = currLocation["X"] + xoffset
newY = currLocation["Y"] + yoffset
extendcommand = Path.Command('G1', {"X": newX, "Y": newY})
results.append(extendcommand)
currLocation.update(extendcommand.Parameters)
replace = None
return (results, replace)
def FSMoveToObject(ScrewObj_m, attachToObject, invert, offset):
Pnt1 = None
Axis1 = None
Axis2 = None
s = attachToObject
if hasattr(s, "Curve"):
if hasattr(s.Curve, "Center"):
Pnt1 = s.Curve.Center
Axis1 = s.Curve.Axis
if hasattr(s, 'Surface'):
#print 'the object is a face!'
if hasattr(s.Surface, 'Axis'):
Axis1 = s.Surface.Axis
if hasattr(s, 'Point'):
FreeCAD.Console.PrintLog("the object seems to be a vertex! " +
str(s.Point) + "\n")
Pnt1 = s.Point
if (Axis1 != None):
if invert:
Axis1 = Base.Vector(0, 0, 0) - Axis1
Pnt1 = Pnt1 + Axis1 * offset
#FreeCAD.Console.PrintLog( "Got Axis1: " + str(Axis1) + "\n")
Axis2 = Base.Vector(0.0, 0.0, 1.0)
Axis2_minus = Base.Vector(0.0, 0.0, -1.0)
# Calculate angle
if Axis1 == Axis2:
normvec = Base.Vector(1.0, 0.0, 0.0)
result = 0.0
else:
if Axis1 == Axis2_minus:
normvec = Base.Vector(1.0, 0.0, 0.0)
result = math.pi
else:
normvec = Axis1.cross(
Axis2) # Berechne Achse der Drehung = normvec
normvec.normalize() # Normalisieren fuer Quaternionenrechnung
#normvec_rot = normvec
result = DraftVecUtils.angle(Axis1, Axis2,
normvec) # Winkelberechnung
sin_res = math.sin(result / 2.0)
cos_res = math.cos(result / 2.0)
normvec.multiply(-sin_res) # Berechnung der Quaternionen-Elemente
#FreeCAD.Console.PrintLog( "Winkel = "+ str(math.degrees(result)) + "\n")
#FreeCAD.Console.PrintLog("Normalvektor: "+ str(normvec) + "\n")
pl = FreeCAD.Placement()
pl.Rotation = (normvec.x, normvec.y, normvec.z, cos_res
) #Drehungs-Quaternion
#FreeCAD.Console.PrintLog("pl mit Rot: "+ str(pl) + "\n")
ScrewObj_m.Placement = FreeCAD.Placement()
ScrewObj_m.Placement.Rotation = pl.Rotation.multiply(
ScrewObj_m.Placement.Rotation)
ScrewObj_m.Placement.move(Pnt1)
def getDeviation(self):
"returns the deviation angle between the u axis and the horizontal plane"
proj = Vector(self.u.x,self.u.y,0)
if self.u.getAngle(proj) == 0:
return 0
else:
norm = proj.cross(self.u)
return DraftVecUtils.angle(self.u,proj,norm)
def rotateSel(sel, n):
p = sel.Object.Placement
loc = sel.Object.Placement.Base
r = axis.cross(n) # rotation axis
a = DraftVecUtils.angle(n, axis, r) * 180 / math.pi
PathLog.debug("oh boy: (%.2f, %.2f, %.2f) -> %.2f" %
(r.x, r.y, r.z, a))
Draft.rotate(sel.Object, a, axis=r)
def getAngle(self,pt):
"returns the angle of a given vector"
c = self.trans.translation.getValue()
center = Vector(c[0],c[1],c[2])
rad = pt.sub(center)
a = DraftVecUtils.angle(rad,self.basevector,self.normal)
#print(a)
return(a)
def getDeviation(self):
"returns the deviation angle between the u axis and the horizontal plane"
proj = Vector(self.u.x, self.u.y, 0)
if self.u.getAngle(proj) == 0:
return 0
else:
norm = proj.cross(self.u)
return DraftVecUtils.angle(self.u, proj, norm)
def getAngle(self,pt):
"returns the angle of a given vector"
c = self.trans.translation.getValue()
center = Vector(c[0],c[1],c[2])
rad = pt.sub(center)
a = DraftVecUtils.angle(rad,self.basevector,self.normal)
#print(a)
return(a)
def addCircle(radius,
placement=None,
face=None,
startangle=None,
endangle=None,
support=None):
import Part, DraftGeomUtils
if placement: typecheck([(placement, FreeCAD.Placement)], "makeCircle")
if startangle != endangle:
n = "Arc"
else:
n = "Circle"
obj = FreeCAD.ActiveDocument.addObject("Part::Part2DObjectPython", n)
_Circle(obj)
if face != None:
obj.MakeFace = face
if isinstance(radius, Part.Edge):
edge = radius
if DraftGeomUtils.geomType(edge) == "Circle":
obj.Radius = edge.Curve.Radius
placement = FreeCAD.Placement(edge.Placement)
delta = edge.Curve.Center.sub(placement.Base)
placement.move(delta)
if len(edge.Vertexes) > 1:
ref = placement.multVec(FreeCAD.Vector(1, 0, 0))
v1 = (edge.Vertexes[0].Point).sub(edge.Curve.Center)
v2 = (edge.Vertexes[-1].Point).sub(edge.Curve.Center)
a1 = -math.degrees(DraftVecUtils.angle(v1, ref))
a2 = -math.degrees(DraftVecUtils.angle(v2, ref))
obj.FirstAngle = a1
obj.LastAngle = a2
else:
obj.Radius = radius
if (startangle != None) and (endangle != None):
if startangle == -0: startangle = 0
obj.FirstAngle = startangle
obj.LastAngle = endangle
obj.Support = support
if placement: obj.Placement = placement
if gui:
_ViewProviderDraft(obj.ViewObject)
formatObject(obj)
select(obj)
FreeCAD.ActiveDocument.recompute()
return obj
def getCubicDimensions(shape):
"""getCubicDimensions(shape): returns a list containing the placement,
the length, the width and the height of a cubic shape. If not cubic, nothing
is returned. The placement point is the lowest corner of the shape."""
if not isCubic(shape): return None
# determine lowest face, which will be our base
z = [10, 1000000000000]
for i in range(len(shape.Faces)):
if shape.Faces[i].CenterOfMass.z < z[1]:
z = [i, shape.Faces[i].CenterOfMass.z]
if z[0] > 5: return None
base = shape.Faces[z[0]]
basepoint = base.Edges[0].Vertexes[0].Point
plpoint = base.CenterOfMass
basenorm = base.normalAt(0.5, 0.5)
# getting length and width
vx = vec(base.Edges[0])
vy = vec(base.Edges[1])
# getting rotations
rotZ = DraftVecUtils.angle(vx)
rotY = DraftVecUtils.angle(vx, FreeCAD.Vector(vx.x, vx.y, 0))
rotX = DraftVecUtils.angle(vy, FreeCAD.Vector(vy.x, vy.y, 0))
# getting height
vz = None
rpi = round(math.pi / 2, precision())
for i in range(1, 6):
for e in shape.Faces[i].Edges:
if basepoint in [e.Vertexes[0].Point, e.Vertexes[1].Point]:
vtemp = vec(e)
# print(vtemp)
if round(vtemp.getAngle(vx), precision()) == rpi:
if round(vtemp.getAngle(vy), precision()) == rpi:
vz = vtemp
if not vz: return None
mat = FreeCAD.Matrix()
mat.move(plpoint)
mat.rotateX(rotX)
mat.rotateY(rotY)
mat.rotateZ(rotZ)
return [
FreeCAD.Placement(mat),
round(vx.Length, precision()),
round(vy.Length, precision()),
round(vz.Length, precision())
]
def FSMoveToObject(ScrewObj_m, attachToObject, invert, offset):
Pnt1 = None
Axis1 = None
Axis2 = None
s = attachToObject
if hasattr(s,"Curve"):
if hasattr(s.Curve,"Center"):
Pnt1 = s.Curve.Center
Axis1 = s.Curve.Axis
if hasattr(s,'Surface'):
#print 'the object is a face!'
if hasattr(s.Surface,'Axis'):
Axis1 = s.Surface.Axis
if hasattr(s,'Point'):
FreeCAD.Console.PrintLog( "the object seems to be a vertex! "+ str(s.Point) + "\n")
Pnt1 = s.Point
if (Axis1 != None):
if invert:
Axis1 = Base.Vector(0,0,0) - Axis1
Pnt1 = Pnt1 + Axis1 * offset
#FreeCAD.Console.PrintLog( "Got Axis1: " + str(Axis1) + "\n")
Axis2 = Base.Vector(0.0,0.0,1.0)
Axis2_minus = Base.Vector(0.0,0.0,-1.0)
# Calculate angle
if Axis1 == Axis2:
normvec = Base.Vector(1.0,0.0,0.0)
result = 0.0
else:
if Axis1 == Axis2_minus:
normvec = Base.Vector(1.0,0.0,0.0)
result = math.pi
else:
normvec = Axis1.cross(Axis2) # Berechne Achse der Drehung = normvec
normvec.normalize() # Normalisieren fuer Quaternionenrechnung
#normvec_rot = normvec
result = DraftVecUtils.angle(Axis1, Axis2, normvec) # Winkelberechnung
sin_res = math.sin(result/2.0)
cos_res = math.cos(result/2.0)
normvec.multiply(-sin_res) # Berechnung der Quaternionen-Elemente
#FreeCAD.Console.PrintLog( "Winkel = "+ str(math.degrees(result)) + "\n")
#FreeCAD.Console.PrintLog("Normalvektor: "+ str(normvec) + "\n")
pl = FreeCAD.Placement()
pl.Rotation = (normvec.x,normvec.y,normvec.z,cos_res) #Drehungs-Quaternion
#FreeCAD.Console.PrintLog("pl mit Rot: "+ str(pl) + "\n")
#neuPlatz = Part2.Object.Placement.multiply(pl)
ScrewObj_m.Placement = FreeCAD.Placement()
neuPlatz = ScrewObj_m.Placement
#FreeCAD.Console.PrintLog("die Position "+ str(neuPlatz) + "\n")
neuPlatz.Rotation = pl.Rotation.multiply(ScrewObj_m.Placement.Rotation)
neuPlatz.move(Pnt1)
def lineTwist(self, obj, queue, lastXY, twistCW=False):
'''returns gcode to do an arc move toward a line to perform
a corner action twist. Includes lifting and plungeing the knife'''
global currLocation
pivotheight = obj.pivotheight
offset = obj.offset
results = []
# set the correct twist command
if twistCW is False:
arcdir = "G3"
else:
arcdir = "G2"
# move to pivot height
zdepth = currLocation["Z"]
retract = Path.Command("G0", {"Z": pivotheight})
results.append(retract)
currLocation.update(retract.Parameters)
C = queue[1].Placement.Base
# get the vectors between endpoints to calculate twist
v2 = queue[0].Placement.Base.sub(queue[1].Placement.Base)
# calc arc endpoints to twist to
segAngle = D.angle(v2, FreeCAD.Base.Vector(1, 0, 0),
FreeCAD.Base.Vector(0, 0, -1))
xoffset = math.cos(segAngle) * offset
yoffset = math.sin(segAngle) * offset
newX = queue[1].x + xoffset
newY = queue[1].y + yoffset
offsetvector = C.sub(lastXY)
I = offsetvector.x
J = offsetvector.y
# add the arc move
arcmove = Path.Command(arcdir, {
"X": newX,
"Y": newY,
"I": I,
"J": J
}) # add G2/G3 move
results.append(arcmove)
currLocation.update(arcmove.Parameters)
# plunge back to depth
plunge = Path.Command("G1", {"Z": zdepth})
results.append(plunge)
currLocation.update(plunge.Parameters)
replace = None
return (results, replace)
def getRotation(v1, v2=App.Vector(0, 0, 1)):
"""Get the rotation Quaternion between 2 vectors."""
if (v1.dot(v2) > 0.999999) or (v1.dot(v2) < -0.999999):
# vectors are opposite
return None
axis = v1.cross(v2)
axis.normalize()
# angle = math.degrees(math.sqrt(v1.Length^2 * v2.Length^2) + v1.dot(v2))
angle = math.degrees(DraftVecUtils.angle(v1, v2, axis))
return App.Rotation(axis, angle)
def shapeAnalyse(self, name, shape):
## Create a new object with the shape of the current arch object
## His placment is set to 0,0,0
obj = FreeCAD.ActiveDocument.addObject('Part::Feature', name)
obj.Shape = shape
obj.Placement.Base = FreeCAD.Vector(0.0, 0.0, 0.0)
obj.Placement.Rotation = FreeCAD.Rotation(
FreeCAD.Vector(0.0, 0.0, 1.0), 0.0)
FreeCAD.ActiveDocument.recompute()
## Get the face to align with XY plane
faces = obj.Shape.Faces
facesMax = self.getFacesMax(faces)
coupleEquerre = self.getCoupleFacesEquerre(facesMax)
## Get the normal of this face
nv1 = coupleEquerre[0][0].normalAt(0, 0)
## Get the goal normal vector
zv = Vector(0, 0, 1)
## Find and apply a rotation to the object to align face
pla = obj.Placement
rot = pla.Rotation
rot1 = Rotation(nv1, zv)
newrot = rot.multiply(rot1)
pla.Rotation = newrot
## Get the face to align with XY plane
faces = obj.Shape.Faces
facesMax = self.getFacesMax(faces)
coupleEquerre = self.getCoupleFacesEquerre(facesMax)
## Get the longest edge from aligned face
maxLength = 0.
for e in coupleEquerre[0][0].Edges:
if e.Length > maxLength:
maxLength = e.Length
edgeMax = e
## Get the angle between edge and X axis and rotate object
vec = DraftGeomUtils.vec(edgeMax)
vecZ = FreeCAD.Vector(vec[0], vec[1], 0.0)
pos2 = obj.Placement.Base
rotZ = math.degrees(
DraftVecUtils.angle(vecZ, FreeCAD.Vector(1.0, 0.0, 0.0), zv))
Draft.rotate([obj], rotZ, pos2, axis=zv, copy=False)
bb = obj.Shape.BoundBox
movex = bb.XMin * -1
movey = bb.YMin * -1
movez = bb.ZMin * -1
Draft.move([obj], FreeCAD.Vector(movex, movey, movez))
FreeCAD.ActiveDocument.recompute()
## Get the boundbox
analyse = [
obj.Shape.BoundBox.YLength, obj.Shape.BoundBox.ZLength,
obj.Shape.BoundBox.XLength
]
if not "Shape" in self.export:
FreeCAD.ActiveDocument.removeObject(name)
return analyse
def lineTwist(self, obj, queue, lastXY, twistCW=False):
'''returns gcode to do an arc move toward a line to perform
a corner action twist. Includes lifting and plungeing the knife'''
global currLocation
pivotheight = obj.pivotheight
offset = obj.offset
results = []
# set the correct twist command
if twistCW is False:
arcdir = "G3"
else:
arcdir = "G2"
# move to pivot height
zdepth = currLocation["Z"]
retract = Path.Command("G0", {"Z": pivotheight})
results.append(retract)
currLocation.update(retract.Parameters)
C = queue[1].Placement.Base
# get the vectors between endpoints to calculate twist
v2 = queue[0].Placement.Base.sub(queue[1].Placement.Base)
# calc arc endpoints to twist to
segAngle = D.angle(v2, FreeCAD.Base.Vector(1, 0, 0), FreeCAD.Base.Vector(0, 0, -1))
xoffset = math.cos(segAngle) * offset
yoffset = math.sin(segAngle) * offset
newX = queue[1].x + xoffset
newY = queue[1].y + yoffset
offsetvector = C.sub(lastXY)
I = offsetvector.x
J = offsetvector.y
# add the arc move
arcmove = Path.Command(
arcdir, {"X": newX, "Y": newY, "I": I, "J": J}) # add G2/G3 move
results.append(arcmove)
currLocation.update(arcmove.Parameters)
# plunge back to depth
plunge = Path.Command("G1", {"Z": zdepth})
results.append(plunge)
currLocation.update(plunge.Parameters)
replace = None
return (results, replace)
def shapeAnalyse(self, name, shape):
## Create a new object with the shape of the current arch object
## His placment is set to 0,0,0
obj = FreeCAD.ActiveDocument.addObject('Part::Feature',name)
obj.Shape=shape
obj.Placement.Base = FreeCAD.Vector(0.0,0.0,0.0)
obj.Placement.Rotation = FreeCAD.Rotation(FreeCAD.Vector(0.0,0.0,1.0),0.0)
FreeCAD.ActiveDocument.recompute()
## Get the face to align with XY plane
faces = obj.Shape.Faces
facesMax = self.getFacesMax(faces)
coupleEquerre = self.getCoupleFacesEquerre(facesMax)
## Get the normal of this face
nv1 = coupleEquerre[0][0].normalAt(0,0)
## Get the goal normal vector
zv = Vector(0,0,1)
## Find and apply a rotation to the object to align face
pla = obj.Placement
rot = pla.Rotation
rot1 = Rotation(nv1, zv)
newrot = rot.multiply(rot1)
pla.Rotation = newrot
## Get the face to align with XY plane
faces = obj.Shape.Faces
facesMax = self.getFacesMax(faces)
coupleEquerre = self.getCoupleFacesEquerre(facesMax)
## Get the longest edge from aligned face
maxLength = 0.
for e in coupleEquerre[0][0].Edges:
if e.Length > maxLength:
maxLength = e.Length
edgeMax = e
## Get the angle between edge and X axis and rotate object
vec = DraftGeomUtils.vec(edgeMax)
vecZ = FreeCAD.Vector(vec[0],vec[1],0.0)
pos2 = obj.Placement.Base
rotZ = math.degrees(DraftVecUtils.angle(vecZ,FreeCAD.Vector(1.0,0.0,0.0),zv))
Draft.rotate([obj],rotZ,pos2,axis=zv,copy=False)
bb = obj.Shape.BoundBox
movex = bb.XMin*-1
movey = bb.YMin*-1
movez = bb.ZMin*-1
Draft.move([obj], FreeCAD.Vector(movex, movey, movez))
FreeCAD.ActiveDocument.recompute()
## Get the boundbox
analyse = [obj.Shape.BoundBox.YLength, obj.Shape.BoundBox.ZLength, obj.Shape.BoundBox.XLength]
if not "Shape" in self.export :
FreeCAD.ActiveDocument.removeObject(name)
return analyse
def accept(self):
self.recupererDonnees()
distancesListe = []
if self.objetDebut:
distancesListe.append(self.decalageDebut)
if self.plEspaceRestant == 0:
distancesListe.append(self.espaceRestant)
if self.plEspaceRestant == 1:
distancesListe.append(self.ecartementRegulier-self.decalageDebut)
if self.plEspaceRestant == 2:
distancesListe.append(self.espaceRestant/2-self.decalageDebut)
for i in range(self.qteEcartement-2):
distancesListe.append(self.ecartementRegulier)
if self.objetFin:
if self.plEspaceRestant == 0:
distancesListe.append(self.ecartementRegulier-self.decalageFin-self.decalageDebut)
if self.plEspaceRestant == 1:
distancesListe.append(self.espaceRestant-self.decalageFin)
if self.plEspaceRestant == 2:
distancesListe.append(self.ecartementRegulier)
distancesListe.append((self.espaceRestant/2)-self.decalageFin)
repartition = Arch.makeAxis(num=len(distancesListe), name="Repartition")
repartition.Length = 1000.00
repartition.Distances= distancesListe
self.sel = FreeCADGui.Selection.getSelection()
if self.sel:
edges = DraftGeomUtils.sortEdges(self.sel[0].Shape.Wires[0].Edges)
vec1 = edges[0].Vertexes[-1].Point.sub(edges[0].Vertexes[0].Point)
point1 = edges[0].Vertexes[0].Point
rot = math.degrees(DraftVecUtils.angle(vec1))*-1
repartition.Placement = FreeCAD.Placement(FreeCAD.Vector(point1),FreeCAD.Rotation(FreeCAD.Vector(0.0,0.0,1.0),rot))
FreeCAD.ActiveDocument.recompute()
else:
repartition.Placement = FreeCAD.Placement(FreeCAD.Vector(0.0,0.0,0.0),FreeCAD.Rotation(FreeCAD.Vector(0.0,0.0,1.0),0))
m = FreeCADGui.getMainWindow()
w = m.findChild(QtGui.QDockWidget,"PartsLibrary")
if w:
if w.isVisible():
index = w.folder_view.selectedIndexes()[0]
path = w.dirmodel.filePath(index)
if path.lower().endswith(".stp") or path.lower().endswith(".step") or path.lower().endswith(".brep"):
objetRepartit = Part.show(Part.read(path))
else:
objetRepartit = FreeCADGui.ActiveDocument.mergeProject(path)
repartitionStructurel = Arch.makeStructuralSystem([FreeCAD.ActiveDocument.Objects[-1],],[repartition,], name="RepartitionStructurelle")
return True
def setRepresentation(representation):
"""Returns a shape from a 2D IfcShapeRepresentation"""
def getPolyline(ent):
pts = []
for p in ent.Points:
c = p.Coordinates
pts.append(FreeCAD.Vector(c[0],c[1],c[2] if len(c) > 2 else 0))
return Part.makePolygon(pts)
def getCircle(ent):
c = ent.Position.Location.Coordinates
c = FreeCAD.Vector(c[0],c[1],c[2] if len(c) > 2 else 0)
r = ent.Radius
return Part.makeCircle(r,c)
result = []
if representation.is_a("IfcShapeRepresentation"):
for item in representation.Items:
if item.is_a("IfcGeometricCurveSet"):
for el in item.Elements:
if el.is_a("IfcPolyline"):
result.append(getPolyline(el))
elif el.is_a("IfcCircle"):
result.append(getCircle(el))
elif el.is_a("IfcTrimmedCurve"):
base = el.BasisCurve
t1 = el.Trim1[0].wrappedValue
t2 = el.Trim2[0].wrappedValue
if not el.SenseAgreement:
t1,t2 = t2,t1
if base.is_a("IfcPolyline"):
bc = getPolyline(base)
result.append(bc)
elif base.is_a("IfcCircle"):
bc = getCircle(base)
e = Part.ArcOfCircle(bc.Curve,math.radians(t1),math.radians(t2)).toShape()
d = base.Position.RefDirection.DirectionRatios
v = FreeCAD.Vector(d[0],d[1],d[2] if len(d) > 2 else 0)
a = -DraftVecUtils.angle(v)
e.rotate(bc.Curve.Center,FreeCAD.Vector(0,0,1),math.degrees(a))
result.append(e)
return result
def segmentAngleXY(self, prevCommand, currCommand, endpos=False, currentZ=0):
'''returns in the starting angle in radians for a Path command.
requires the previous command in order to calculate arcs correctly
if endpos = True, return the angle at the end of the segment.'''
global arccommands
if currCommand.Name in arccommands:
arcLoc = FreeCAD.Vector((prevCommand.x + currCommand.I), (prevCommand.y + currCommand.J), currentZ)
if endpos is True:
radvector = arcLoc.sub(currCommand.Placement.Base) # Calculate vector at start of arc
else:
radvector = arcLoc.sub(prevCommand.Placement.Base) # Calculate vector at end of arc
v1 = radvector.cross(FreeCAD.Vector(0, 0, 1))
if currCommand.Name in ["G2", "G02"]:
v1 = D.rotate2D(v1, math.radians(180))
else:
v1 = currCommand.Placement.Base.sub(prevCommand.Placement.Base) # Straight segments are easy
myAngle = D.angle(v1, FreeCAD.Base.Vector(1, 0, 0), FreeCAD.Base.Vector(0, 0, -1))
return myAngle
def getTuples(data,scale=1,placement=None,normal=None,close=True):
"""getTuples(data,[scale,placement,normal,close]): returns a tuple or a list of tuples from a vector
or from the vertices of a shape. Scale can indicate a scale factor"""
import Part
if isinstance(data,FreeCAD.Vector):
if placement:
data = placement.multVec(data)
data = DraftVecUtils.rounded(data)
return (data.x*scale,data.y*scale,data.z*scale)
elif isinstance(data,Part.Shape):
t = []
if len(data.Wires) == 1:
import Part,DraftGeomUtils
data = Part.Wire(DraftGeomUtils.sortEdges(data.Wires[0].Edges))
verts = data.Vertexes
try:
c = data.CenterOfMass
v1 = verts[0].Point.sub(c)
v2 = verts[1].Point.sub(c)
if DraftVecUtils.angle(v2,v1,normal) >= 0:
# inverting verts order if the direction is couterclockwise
verts.reverse()
except:
pass
for v in verts:
pt = v.Point
if placement:
if not placement.isNull():
pt = placement.multVec(pt)
pt = DraftVecUtils.rounded(pt)
t.append((pt.x*scale,pt.y*scale,pt.z*scale))
if close: # faceloops must not be closed, but ifc profiles must.
t.append(t[0])
else:
print "Arch.getTuples(): Wrong profile data"
return t
def lineExtension(self, obj, queue):
'''returns gcode for line extension'''
global currLocation
offset = float(obj.offset)
results = []
v1 = queue[1].Placement.Base.sub(queue[2].Placement.Base)
# extend the current segment to comp for offset
segAngle = D.angle(v1, FreeCAD.Base.Vector(1, 0, 0), FreeCAD.Base.Vector(0, 0, -1))
xoffset = math.cos(segAngle) * offset
yoffset = math.sin(segAngle) * offset
newX = currLocation["X"] + xoffset
newY = currLocation["Y"] + yoffset
extendcommand = Path.Command('G1', {"X": newX, "Y": newY})
results.append(extendcommand)
currLocation.update(extendcommand.Parameters)
replace = None
return (results, replace)
def getRepresentation(ifcfile,context,obj,forcebrep=False,subtraction=False,tessellation=1):
"""returns an IfcShapeRepresentation object or None"""
import Part,math,DraftGeomUtils,DraftVecUtils
shapes = []
placement = None
productdef = None
shapetype = "no shape"
if not forcebrep:
profile = None
if hasattr(obj,"Proxy"):
if hasattr(obj.Proxy,"getProfiles"):
p = obj.Proxy.getProfiles(obj,noplacement=True)
extrusionv = obj.Proxy.getExtrusionVector(obj,noplacement=True)
if (len(p) == 1) and extrusionv:
p = p[0]
r = obj.Proxy.getPlacement(obj)
if len(p.Edges) == 1:
pxvc = ifcfile.createIfcDirection((1.0,0.0))
povc = ifcfile.createIfcCartesianPoint((0.0,0.0))
pt = ifcfile.createIfcAxis2Placement2D(povc,pxvc)
# extruded circle
if isinstance(p.Edges[0].Curve,Part.Circle):
profile = ifcfile.createIfcCircleProfileDef("AREA",None,pt, p.Edges[0].Curve.Radius)
# extruded ellipse
elif isinstance(p.Edges[0].Curve,Part.Ellipse):
profile = ifcfile.createIfcEllipseProfileDef("AREA",None,pt, p.Edges[0].Curve.MajorRadius, p.Edges[0].Curve.MinorRadius)
else:
curves = False
for e in p.Edges:
if isinstance(e.Curve,Part.Circle):
curves = True
# extruded polyline
if not curves:
w = Part.Wire(DraftGeomUtils.sortEdges(p.Edges))
pts = [ifcfile.createIfcCartesianPoint(tuple(v.Point)[:2]) for v in w.Vertexes+[w.Vertexes[0]]]
pol = ifcfile.createIfcPolyline(pts)
# extruded composite curve
else:
segments = []
last = None
edges = DraftGeomUtils.sortEdges(p.Edges)
for e in edges:
if isinstance(e.Curve,Part.Circle):
follow = True
if last:
if not DraftVecUtils.equals(last,e.Vertexes[0].Point):
follow = False
last = e.Vertexes[0].Point
else:
last = e.Vertexes[-1].Point
else:
last = e.Vertexes[-1].Point
p1 = math.degrees(-DraftVecUtils.angle(e.Vertexes[0].Point.sub(e.Curve.Center)))
p2 = math.degrees(-DraftVecUtils.angle(e.Vertexes[-1].Point.sub(e.Curve.Center)))
da = DraftVecUtils.angle(e.valueAt(e.FirstParameter+0.1).sub(e.Curve.Center),e.Vertexes[0].Point.sub(e.Curve.Center))
if p1 < 0:
p1 = 360 + p1
if p2 < 0:
p2 = 360 + p2
if da > 0:
follow = not(follow)
xvc = ifcfile.createIfcDirection((1.0,0.0))
ovc = ifcfile.createIfcCartesianPoint(tuple(e.Curve.Center)[:2])
plc = ifcfile.createIfcAxis2Placement2D(ovc,xvc)
cir = ifcfile.createIfcCircle(plc,e.Curve.Radius)
curve = ifcfile.createIfcTrimmedCurve(cir,[ifcfile.create_entity("IfcParameterValue",p1)],[ifcfile.create_entity("IfcParameterValue",p2)],follow,"PARAMETER")
else:
verts = [vertex.Point for vertex in e.Vertexes]
if last:
if not DraftVecUtils.equals(last,verts[0]):
verts.reverse()
last = e.Vertexes[0].Point
else:
last = e.Vertexes[-1].Point
else:
last = e.Vertexes[-1].Point
pts = [ifcfile.createIfcCartesianPoint(tuple(v)[:2]) for v in verts]
curve = ifcfile.createIfcPolyline(pts)
segment = ifcfile.createIfcCompositeCurveSegment("CONTINUOUS",True,curve)
segments.append(segment)
pol = ifcfile.createIfcCompositeCurve(segments,False)
profile = ifcfile.createIfcArbitraryClosedProfileDef("AREA",None,pol)
if profile:
xvc = ifcfile.createIfcDirection(tuple(r.Rotation.multVec(FreeCAD.Vector(1,0,0))))
zvc = ifcfile.createIfcDirection(tuple(r.Rotation.multVec(FreeCAD.Vector(0,0,1))))
ovc = ifcfile.createIfcCartesianPoint(tuple(r.Base))
lpl = ifcfile.createIfcAxis2Placement3D(ovc,zvc,xvc)
edir = ifcfile.createIfcDirection(tuple(FreeCAD.Vector(extrusionv).normalize()))
shape = ifcfile.createIfcExtrudedAreaSolid(profile,lpl,edir,extrusionv.Length)
shapes.append(shape)
solidType = "SweptSolid"
shapetype = "extrusion"
if not shapes:
# brep representation
fcshape = None
solidType = "Brep"
if subtraction:
if hasattr(obj,"Proxy"):
if hasattr(obj.Proxy,"getSubVolume"):
fcshape = obj.Proxy.getSubVolume(obj)
if not fcshape:
if hasattr(obj,"Shape"):
if obj.Shape:
if not obj.Shape.isNull():
fcshape = obj.Shape
elif hasattr(obj,"Terrain"):
if obj.Terrain:
if hasattr(obj.Terrain,"Shape"):
if obj.Terrain.Shape:
if not obj.Terrain.Shape.isNull():
fcshape = obj.Terrain.Shape
if fcshape:
solids = []
if fcshape.Solids:
dataset = fcshape.Solids
else:
dataset = fcshape.Shells
print "Warning! object contains no solids"
for fcsolid in dataset:
faces = []
curves = False
for fcface in fcsolid.Faces:
for e in fcface.Edges:
if not isinstance(e.Curve,Part.Line):
curves = True
if curves:
tris = fcsolid.tessellate(tessellation)
for tri in tris[1]:
pts = [ifcfile.createIfcCartesianPoint(tuple(tris[0][i])) for i in tri]
loop = ifcfile.createIfcPolyLoop(pts)
bound = ifcfile.createIfcFaceOuterBound(loop,True)
face = ifcfile.createIfcFace([bound])
faces.append(face)
else:
for fcface in fcsolid.Faces:
loops = []
verts = [v.Point for v in Part.Wire(DraftGeomUtils.sortEdges(fcface.OuterWire.Edges)).Vertexes]
c = fcface.CenterOfMass
v1 = verts[0].sub(c)
v2 = verts[1].sub(c)
n = fcface.normalAt(0,0)
if DraftVecUtils.angle(v2,v1,n) >= 0:
verts.reverse() # inverting verts order if the direction is couterclockwise
pts = [ifcfile.createIfcCartesianPoint(tuple(v)) for v in verts]
loop = ifcfile.createIfcPolyLoop(pts)
bound = ifcfile.createIfcFaceOuterBound(loop,True)
loops.append(bound)
for wire in fcface.Wires:
if wire.hashCode() != fcface.OuterWire.hashCode():
verts = [v.Point for v in Part.Wire(DraftGeomUtils.sortEdges(wire.Edges)).Vertexes]
v1 = verts[0].sub(c)
v2 = verts[1].sub(c)
if DraftVecUtils.angle(v2,v1,DraftVecUtils.neg(n)) >= 0:
verts.reverse()
pts = [ifcfile.createIfcCartesianPoint(tuple(v)) for v in verts]
loop = ifcfile.createIfcPolyLoop(pts)
bound = ifcfile.createIfcFaceBound(loop,True)
loops.append(bound)
face = ifcfile.createIfcFace(loops)
faces.append(face)
shell = ifcfile.createIfcClosedShell(faces)
shape = ifcfile.createIfcFacetedBrep(shell)
shapes.append(shape)
shapetype = "brep"
if shapes:
if FreeCAD.GuiUp and (not subtraction) and hasattr(obj.ViewObject,"ShapeColor"):
rgb = obj.ViewObject.ShapeColor
col = ifcfile.createIfcColourRgb(None,rgb[0],rgb[1],rgb[2])
ssr = ifcfile.createIfcSurfaceStyleRendering(col,None,None,None,None,None,None,None,"FLAT")
iss = ifcfile.createIfcSurfaceStyle(None,"BOTH",[ssr])
psa = ifcfile.createIfcPresentationStyleAssignment([iss])
for shape in shapes:
isi = ifcfile.createIfcStyledItem(shape,[psa],None)
xvc = ifcfile.createIfcDirection((1.0,0.0,0.0))
zvc = ifcfile.createIfcDirection((0.0,0.0,1.0))
ovc = ifcfile.createIfcCartesianPoint((0.0,0.0,0.0))
gpl = ifcfile.createIfcAxis2Placement3D(ovc,zvc,xvc)
placement = ifcfile.createIfcLocalPlacement(None,gpl)
representation = ifcfile.createIfcShapeRepresentation(context,'Body',solidType,shapes)
productdef = ifcfile.createIfcProductDefinitionShape(None,None,[representation])
return productdef,placement,shapetype
def arcTwist(self, obj, queue, lastXY, twistCW=False):
'''returns gcode to do an arc move toward an arc to perform
a corner action twist. Includes lifting and plungeing the knife'''
global currLocation
pivotheight = obj.pivotheight
offset = obj.offset
results = []
# set the correct twist command
if twistCW is False:
arcdir = "G3"
else:
arcdir = "G2"
# move to the pivot height
zdepth = currLocation["Z"]
retract = Path.Command("G0", {"Z": pivotheight})
results.append(retract)
currLocation.update(retract.Parameters)
# get the center of the destination arc
arccenter = FreeCAD.Base.Vector(queue[1].x + queue[0].I, queue[1].y + queue[0].J, currLocation["Z"])
# The center of the twist arc is the old line end point.
C = queue[1].Placement.Base
# Find radius of old arc
R = math.hypot(queue[0].I, queue[0].J)
# find angle of original center to startpoint
v1 = queue[1].Placement.Base.sub(arccenter)
segAngle = D.angle(v1, FreeCAD.Base.Vector(1, 0, 0), FreeCAD.Base.Vector(0, 0, -1))
# Find angle subtended by the offset
theta = offset / R
# add or subtract theta depending on direction
if queue[1].Name in ["G2", "G02"]:
newangle = segAngle + theta
else:
newangle = segAngle - theta
# calculate endpoints
Bx = arccenter.x + R * math.cos(newangle)
By = arccenter.y + R * math.sin(newangle)
endpointvector = FreeCAD.Base.Vector(Bx, By, currLocation['Z'])
# calculate IJ offsets of twist arc from current position.
offsetvector = C.sub(lastXY)
# add G2/G3 move
arcmove = Path.Command(
arcdir, {"X": endpointvector.x, "Y": endpointvector.y, "I": offsetvector.x, "J": offsetvector.y})
results.append(arcmove)
currLocation.update(arcmove.Parameters)
# plunge back to depth
plunge = Path.Command("G1", {"Z": zdepth})
results.append(plunge)
currLocation.update(plunge.Parameters)
# The old arc move won't work so calculate a replacement command
offsetv = arccenter.sub(endpointvector)
replace = Path.Command(
queue[0].Name, {"X": queue[0].X, "Y": queue[0].Y, "I": offsetv.x, "J": offsetv.y})
return (results, replace)
def getSVG(obj,scale=1,linewidth=0.35,fontsize=12,fillstyle="shape color",direction=None,linestyle=None,color=None,linespacing=None,techdraw=False,rotation=0):
'''getSVG(object,[scale], [linewidth],[fontsize],[fillstyle],[direction],[linestyle],[color],[linespacing]):
returns a string containing a SVG representation of the given object,
with the given linewidth and fontsize (used if the given object contains
any text). You can also supply an arbitrary projection vector. the
scale parameter allows to scale linewidths down, so they are resolution-independant.'''
# if this is a group, gather all the svg views of its children
if hasattr(obj,"isDerivedFrom"):
if obj.isDerivedFrom("App::DocumentObjectGroup"):
svg = ""
for child in obj.Group:
svg += getSVG(child,scale,linewidth,fontsize,fillstyle,direction,linestyle,color,linespacing,techdraw)
return svg
pathdata = []
svg = ""
linewidth = float(linewidth)/scale
fontsize = (float(fontsize)/scale)/2
if linespacing:
linespacing = float(linespacing)/scale
else:
linespacing = 0.5
#print obj.Label," line spacing ",linespacing,"scale ",scale
pointratio = .75 # the number of times the dots are smaller than the arrow size
plane = None
if direction:
if isinstance(direction,FreeCAD.Vector):
if direction != Vector(0,0,0):
plane = WorkingPlane.plane()
plane.alignToPointAndAxis_SVG(Vector(0,0,0),direction.negative().negative(),0)
elif isinstance(direction,WorkingPlane.plane):
plane = direction
stroke = "#000000"
if color:
if "#" in color:
stroke = color
else:
stroke = getrgb(color)
elif gui:
if hasattr(obj,"ViewObject"):
if hasattr(obj.ViewObject,"LineColor"):
stroke = getrgb(obj.ViewObject.LineColor)
def getPath(edges=[],wires=[],pathname=None):
import Part,DraftGeomUtils
svg = "<path "
if pathname is None:
svg += 'id="%s" ' % obj.Name
elif pathname != "":
svg += 'id="%s" ' % pathname
svg += ' d="'
if not wires:
egroups = Part.sortEdges(edges)
else:
egroups = []
for w in wires:
w1=w.copy()
w1.fixWire()
egroups.append(Part.__sortEdges__(w1.Edges))
for egroupindex, edges in enumerate(egroups):
edata = ""
vs=() #skipped for the first edge
for edgeindex,e in enumerate(edges):
previousvs = vs
# vertexes of an edge (reversed if needed)
vs = e.Vertexes
if previousvs:
if (vs[0].Point-previousvs[-1].Point).Length > 1e-6:
vs.reverse()
if edgeindex == 0:
v = getProj(vs[0].Point, plane)
edata += 'M '+ str(v.x) +' '+ str(v.y) + ' '
else:
if (vs[0].Point-previousvs[-1].Point).Length > 1e-6:
raise ValueError('edges not ordered')
iscircle = DraftGeomUtils.geomType(e) == "Circle"
isellipse = DraftGeomUtils.geomType(e) == "Ellipse"
if iscircle or isellipse:
import math
if hasattr(FreeCAD,"DraftWorkingPlane"):
drawing_plane_normal = FreeCAD.DraftWorkingPlane.axis
else:
drawing_plane_normal = FreeCAD.Vector(0,0,1)
if plane: drawing_plane_normal = plane.axis
c = e.Curve
if round(c.Axis.getAngle(drawing_plane_normal),2) in [0,3.14]:
occversion = Part.OCC_VERSION.split(".")
done = False
if (int(occversion[0]) >= 7) and (int(occversion[1]) >= 1):
# if using occ >= 7.1, use HLR algorithm
import Drawing
snip = Drawing.projectToSVG(e,drawing_plane_normal)
if snip:
try:
a = "A " + snip.split("path d=\"")[1].split("\"")[0].split("A")[1]
except:
pass
else:
edata += a
done = True
if not done:
if len(e.Vertexes) == 1 and iscircle: #complete curve
svg = getCircle(e)
return svg
elif len(e.Vertexes) == 1 and isellipse:
#svg = getEllipse(e)
#return svg
endpoints = (getProj(c.value((c.LastParameter-\
c.FirstParameter)/2.0), plane), \
getProj(vs[-1].Point, plane))
else:
endpoints = (getProj(vs[-1].Point), plane)
# arc
if iscircle:
rx = ry = c.Radius
rot = 0
else: #ellipse
rx = c.MajorRadius
ry = c.MinorRadius
rot = math.degrees(c.AngleXU * (c.Axis * \
FreeCAD.Vector(0,0,1)))
if rot > 90:
rot -=180
if rot < -90:
rot += 180
#be careful with the sweep flag
flag_large_arc = (((e.ParameterRange[1] - \
e.ParameterRange[0]) / math.pi) % 2) > 1
#flag_sweep = (c.Axis * drawing_plane_normal >= 0) \
# == (e.LastParameter > e.FirstParameter)
# == (e.Orientation == "Forward")
# other method: check the direction of the angle between tangents
t1 = e.tangentAt(e.FirstParameter)
t2 = e.tangentAt(e.FirstParameter + (e.LastParameter-e.FirstParameter)/10)
flag_sweep = (DraftVecUtils.angle(t1,t2,drawing_plane_normal) < 0)
for v in endpoints:
edata += 'A %s %s %s %s %s %s %s ' % \
(str(rx),str(ry),str(rot),\
str(int(flag_large_arc)),\
str(int(flag_sweep)),str(v.x),str(v.y))
else:
edata += getDiscretized(e, plane)
elif DraftGeomUtils.geomType(e) == "Line":
v = getProj(vs[-1].Point, plane)
edata += 'L '+ str(v.x) +' '+ str(v.y) + ' '
else:
bspline=e.Curve.toBSpline(e.FirstParameter,e.LastParameter)
if bspline.Degree > 3 or bspline.isRational():
try:
bspline=bspline.approximateBSpline(0.05,50, 3,'C0')
except RuntimeError:
print("Debug: unable to approximate bspline")
if bspline.Degree <= 3 and not bspline.isRational():
for bezierseg in bspline.toBezier():
if bezierseg.Degree>3: #should not happen
raise AssertionError
elif bezierseg.Degree==1:
edata +='L '
elif bezierseg.Degree==2:
edata +='Q '
elif bezierseg.Degree==3:
edata +='C '
for pole in bezierseg.getPoles()[1:]:
v = getProj(pole, plane)
edata += str(v.x) +' '+ str(v.y) + ' '
else:
print("Debug: one edge (hash ",e.hashCode(),\
") has been discretized with parameter 0.1")
for linepoint in bspline.discretize(0.1)[1:]:
v = getProj(linepoint, plane)
edata += 'L '+ str(v.x) +' '+ str(v.y) + ' '
if fill != 'none':
edata += 'Z '
if edata in pathdata:
# do not draw a path on another identical path
return ""
else:
svg += edata
pathdata.append(edata)
svg += '" '
svg += 'stroke="' + stroke + '" '
svg += 'stroke-width="' + str(linewidth) + ' px" '
svg += 'style="stroke-width:'+ str(linewidth)
svg += ';stroke-miterlimit:4'
svg += ';stroke-dasharray:' + lstyle
svg += ';fill:' + fill
try:
svg += ';fill-opacity:' + str(fill_opacity)
except NameError:
pass
svg += ';fill-rule: evenodd "'
svg += '/>\n'
return svg
def getCircle(edge):
cen = getProj(edge.Curve.Center, plane)
rad = edge.Curve.Radius
if hasattr(FreeCAD,"DraftWorkingPlane"):
drawing_plane_normal = FreeCAD.DraftWorkingPlane.axis
else:
drawing_plane_normal = FreeCAD.Vector(0,0,1)
if plane: drawing_plane_normal = plane.axis
if round(edge.Curve.Axis.getAngle(drawing_plane_normal),2) == 0:
# perpendicular projection: circle
svg = '<circle cx="' + str(cen.x)
svg += '" cy="' + str(cen.y)
svg += '" r="' + str(rad)+'" '
else:
# any other projection: ellipse
svg = '<path d="'
svg += getDiscretized(edge, plane)
svg += '" '
svg += 'stroke="' + stroke + '" '
svg += 'stroke-width="' + str(linewidth) + ' px" '
svg += 'style="stroke-width:'+ str(linewidth)
svg += ';stroke-miterlimit:4'
svg += ';stroke-dasharray:' + lstyle
svg += ';fill:' + fill + '"'
svg += '/>\n'
return svg
def getEllipse(edge):
cen = getProj(edge.Curve.Center, plane)
mir = edge.Curve.MinorRadius
mar = edge.Curve.MajorRadius
svg = '<ellipse cx="' + str(cen.x)
svg += '" cy="' + str(cen.y)
svg += '" rx="' + str(mar)
svg += '" ry="' + str(mir)+'" '
svg += 'stroke="' + stroke + '" '
svg += 'stroke-width="' + str(linewidth) + ' px" '
svg += 'style="stroke-width:'+ str(linewidth)
svg += ';stroke-miterlimit:4'
svg += ';stroke-dasharray:' + lstyle
svg += ';fill:' + fill + '"'
svg += '/>\n'
return svg
def getArrow(arrowtype,point,arrowsize,color,linewidth,angle=0):
svg = ""
if gui:
if not obj.ViewObject:
return svg
if obj.ViewObject.ArrowType == "Circle":
svg += '<circle cx="'+str(point.x)+'" cy="'+str(point.y)
svg += '" r="'+str(arrowsize)+'" '
svg += 'fill="none" stroke="'+ color + '" '
svg += 'style="stroke-width:'+ str(linewidth) + ';stroke-miterlimit:4;stroke-dasharray:none" '
svg += 'freecad:skip="1"'
svg += '/>\n'
elif obj.ViewObject.ArrowType == "Dot":
svg += '<circle cx="'+str(point.x)+'" cy="'+str(point.y)
svg += '" r="'+str(arrowsize)+'" '
svg += 'fill="'+ color +'" stroke="none" '
svg += 'style="stroke-miterlimit:4;stroke-dasharray:none" '
svg += 'freecad:skip="1"'
svg += '/>\n'
elif obj.ViewObject.ArrowType == "Arrow":
svg += '<path transform="rotate('+str(math.degrees(angle))
svg += ','+ str(point.x) + ',' + str(point.y) + ') '
svg += 'translate(' + str(point.x) + ',' + str(point.y) + ') '
svg += 'scale('+str(arrowsize)+','+str(arrowsize)+')" freecad:skip="1" '
svg += 'fill="'+ color +'" stroke="none" '
svg += 'style="stroke-miterlimit:4;stroke-dasharray:none" '
svg += 'd="M 0 0 L 4 1 L 4 -1 Z"/>\n'
elif obj.ViewObject.ArrowType == "Tick":
svg += '<path transform="rotate('+str(math.degrees(angle))
svg += ','+ str(point.x) + ',' + str(point.y) + ') '
svg += 'translate(' + str(point.x) + ',' + str(point.y) + ') '
svg += 'scale('+str(arrowsize)+','+str(arrowsize)+')" freecad:skip="1" '
svg += 'fill="'+ color +'" stroke="none" '
svg += 'style="stroke-miterlimit:4;stroke-dasharray:none" '
svg += 'd="M -1 -2 L 0 2 L 1 2 L 0 -2 Z"/>\n'
elif obj.ViewObject.ArrowType == "Tick-2":
svg += '<line transform="rotate('+str(math.degrees(angle)+45)
svg += ','+ str(point.x) + ',' + str(point.y) + ') '
svg += 'translate(' + str(point.x) + ',' + str(point.y) + ') '
svg += '" freecad:skip="1" '
svg += 'fill="none" stroke="'+ color +'" '
svg += 'style="stroke-dasharray:none;stroke-linecap:square;'
svg += 'stroke-width:'+ str(linewidth) +'" '
svg += 'x1="-'+ str(arrowsize*2) +'" y1="0" '
svg += 'x2="' + str(arrowsize*2) +'" y2="0" />\n'
else:
print("getSVG: arrow type not implemented")
return svg
def getOvershoot(point,shootsize,color,linewidth,angle=0):
svg = '<line transform="rotate('+str(math.degrees(angle))
svg += ','+ str(point.x) + ',' + str(point.y) + ') '
svg += 'translate(' + str(point.x) + ',' + str(point.y) + ') '
svg += '" freecad:skip="1" '
svg += 'fill="none" stroke="'+ color +'" '
svg += 'style="stroke-dasharray:none;stroke-linecap:square;'
svg += 'stroke-width:'+ str(linewidth) +'" '
svg += 'x1="0" y1="0" '
svg += 'x2="'+ str(shootsize*-1) +'" y2="0" />\n'
return svg
def getText(color,fontsize,fontname,angle,base,text,linespacing=0.5,align="center",flip=True):
if isinstance(angle,FreeCAD.Rotation):
if not plane:
angle = angle.Angle
else:
if plane.axis.getAngle(angle.Axis) < 0.001:
angle = angle.Angle
elif abs(plane.axis.getAngle(angle.Axis)-math.pi) < 0.001:
return "" # text is perpendicular to view, so it shouldn't appear
else:
angle = 0 #TODO maybe there is something better to do here?
if not isinstance(text,list):
text = text.split("\n")
if align.lower() == "center":
anchor = "middle"
elif align.lower() == "left":
anchor = "start"
else:
anchor = "end"
if techdraw:
svg = ""
for i in range(len(text)):
t = text[i]
if sys.version_info.major < 3 and (not isinstance(t,unicode)):
t = t.decode("utf8")
# possible workaround if UTF8 is unsupported
# import unicodedata
# t = u"".join([c for c in unicodedata.normalize("NFKD",t) if not unicodedata.combining(c)]).encode("utf8")
svg += '<text fill="' + color +'" font-size="' + str(fontsize) + '" '
svg += 'style="text-anchor:'+anchor+';text-align:'+align.lower()+';'
svg += 'font-family:'+ fontname +'" '
svg += 'transform="rotate('+str(math.degrees(angle))
svg += ','+ str(base.x) + ',' + str(base.y-linespacing*i) + ') '
svg += 'translate(' + str(base.x) + ',' + str(base.y-linespacing*i) + ') '
svg += 'scale(1,-1)" '
#svg += '" freecad:skip="1"'
svg += '>\n' + t + '</text>\n'
else:
svg = '<text fill="'
svg += color +'" font-size="'
svg += str(fontsize) + '" '
svg += 'style="text-anchor:'+anchor+';text-align:'+align.lower()+';'
svg += 'font-family:'+ fontname +'" '
svg += 'transform="rotate('+str(math.degrees(angle))
svg += ','+ str(base.x) + ',' + str(base.y) + ') '
if flip:
svg += 'translate(' + str(base.x) + ',' + str(base.y) + ')'
else:
svg += 'translate(' + str(base.x) + ',' + str(-base.y) + ')'
#svg += 'scale('+str(tmod/2000)+',-'+str(tmod/2000)+') '
if flip:
svg += ' scale(1,-1) '
else:
svg += ' scale(1,1) '
svg += '" freecad:skip="1"'
svg += '>\n'
if len(text) == 1:
try:
svg += text[0]
except:
svg += text[0].decode("utf8")
else:
for i in range(len(text)):
if i == 0:
svg += '<tspan>'
else:
svg += '<tspan x="0" dy="'+str(linespacing)+'">'
try:
svg += text[i]
except:
svg += text[i].decode("utf8")
svg += '</tspan>\n'
svg += '</text>\n'
return svg
if not obj:
pass
elif isinstance(obj,Part.Shape):
if "#" in fillstyle:
fill = fillstyle
elif fillstyle == "shape color":
fill = "#888888"
else:
fill = 'url(#'+fillstyle+')'
lstyle = getLineStyle(linestyle, scale)
svg += getPath(obj.Edges,pathname="")
elif getType(obj) == "Dimension":
if gui:
if not obj.ViewObject:
print ("export of dimensions to SVG is only available in GUI mode")
elif obj.ViewObject.Proxy:
if hasattr(obj.ViewObject.Proxy,"p1"):
prx = obj.ViewObject.Proxy
ts = (len(prx.string)*obj.ViewObject.FontSize.Value)/4.0
rm = ((prx.p3.sub(prx.p2)).Length/2.0)-ts
p2a = getProj(prx.p2.add(DraftVecUtils.scaleTo(prx.p3.sub(prx.p2),rm)), plane)
p2b = getProj(prx.p3.add(DraftVecUtils.scaleTo(prx.p2.sub(prx.p3),rm)), plane)
p1 = getProj(prx.p1, plane)
p2 = getProj(prx.p2, plane)
p3 = getProj(prx.p3, plane)
p4 = getProj(prx.p4, plane)
tbase = getProj(prx.tbase, plane)
r = prx.textpos.rotation.getValue().getValue()
rv = FreeCAD.Rotation(r[0],r[1],r[2],r[3]).multVec(FreeCAD.Vector(1,0,0))
angle = -DraftVecUtils.angle(getProj(rv, plane))
#angle = -DraftVecUtils.angle(p3.sub(p2))
# drawing lines
svg = '<path '
if obj.ViewObject.DisplayMode == "2D":
tangle = angle
if tangle > math.pi/2:
tangle = tangle-math.pi
#elif (tangle <= -math.pi/2) or (tangle > math.pi/2):
# tangle = tangle+math.pi
#tbase = tbase.add(DraftVecUtils.rotate(Vector(0,2/scale,0),tangle))
if rotation != 0:
#print "dim: tangle:",tangle," rot: ",rotation," text: ",prx.string
if abs(tangle+math.radians(rotation)) < 0.0001:
tangle += math.pi
tbase = tbase.add(DraftVecUtils.rotate(Vector(0,2/scale,0),tangle))
svg += 'd="M '+str(p1.x)+' '+str(p1.y)+' '
svg += 'L '+str(p2.x)+' '+str(p2.y)+' '
svg += 'L '+str(p3.x)+' '+str(p3.y)+' '
svg += 'L '+str(p4.x)+' '+str(p4.y)+'" '
else:
tangle = 0
if rotation != 0:
tangle = -math.radians(rotation)
tbase = tbase.add(Vector(0,-2.0/scale,0))
svg += 'd="M '+str(p1.x)+' '+str(p1.y)+' '
svg += 'L '+str(p2.x)+' '+str(p2.y)+' '
svg += 'L '+str(p2a.x)+' '+str(p2a.y)+' '
svg += 'M '+str(p2b.x)+' '+str(p2b.y)+' '
svg += 'L '+str(p3.x)+' '+str(p3.y)+' '
svg += 'L '+str(p4.x)+' '+str(p4.y)+'" '
svg += 'fill="none" stroke="'
svg += stroke + '" '
svg += 'stroke-width="' + str(linewidth) + ' px" '
svg += 'style="stroke-width:'+ str(linewidth)
svg += ';stroke-miterlimit:4;stroke-dasharray:none" '
svg += 'freecad:basepoint1="'+str(p1.x)+' '+str(p1.y)+'" '
svg += 'freecad:basepoint2="'+str(p4.x)+' '+str(p4.y)+'" '
svg += 'freecad:dimpoint="'+str(p2.x)+' '+str(p2.y)+'"'
svg += '/>\n'
# drawing dimension and extension lines overshoots
if hasattr(obj.ViewObject,"DimOvershoot") and obj.ViewObject.DimOvershoot.Value:
shootsize = obj.ViewObject.DimOvershoot.Value/pointratio
svg += getOvershoot(p2,shootsize,stroke,linewidth,angle)
svg += getOvershoot(p3,shootsize,stroke,linewidth,angle+math.pi)
if hasattr(obj.ViewObject,"ExtOvershoot") and obj.ViewObject.ExtOvershoot.Value:
shootsize = obj.ViewObject.ExtOvershoot.Value/pointratio
shootangle = -DraftVecUtils.angle(p1.sub(p2))
svg += getOvershoot(p2,shootsize,stroke,linewidth,shootangle)
svg += getOvershoot(p3,shootsize,stroke,linewidth,shootangle)
# drawing arrows
if hasattr(obj.ViewObject,"ArrowType"):
arrowsize = obj.ViewObject.ArrowSize.Value/pointratio
if hasattr(obj.ViewObject,"FlipArrows"):
if obj.ViewObject.FlipArrows:
angle = angle+math.pi
svg += getArrow(obj.ViewObject.ArrowType,p2,arrowsize,stroke,linewidth,angle)
svg += getArrow(obj.ViewObject.ArrowType,p3,arrowsize,stroke,linewidth,angle+math.pi)
# drawing text
svg += getText(stroke,fontsize,obj.ViewObject.FontName,tangle,tbase,prx.string)
elif getType(obj) == "AngularDimension":
if gui:
if not obj.ViewObject:
print ("export of dimensions to SVG is only available in GUI mode")
elif obj.ViewObject.Proxy:
if hasattr(obj.ViewObject.Proxy,"circle"):
prx = obj.ViewObject.Proxy
# drawing arc
fill= "none"
lstyle = getLineStyle(linestyle, scale)
if obj.ViewObject.DisplayMode == "2D":
svg += getPath([prx.circle])
else:
if hasattr(prx,"circle1"):
svg += getPath([prx.circle1])
svg += getPath([prx.circle2])
else:
svg += getPath([prx.circle])
# drawing arrows
if hasattr(obj.ViewObject,"ArrowType"):
p2 = getProj(prx.p2, plane)
p3 = getProj(prx.p3, plane)
arrowsize = obj.ViewObject.ArrowSize.Value/pointratio
arrowlength = 4*obj.ViewObject.ArrowSize.Value
u1 = getProj((prx.circle.valueAt(prx.circle.FirstParameter+arrowlength)).sub(prx.circle.valueAt(prx.circle.FirstParameter)), plane)
u2 = getProj((prx.circle.valueAt(prx.circle.LastParameter-arrowlength)).sub(prx.circle.valueAt(prx.circle.LastParameter)), plane)
angle1 = -DraftVecUtils.angle(u1)
angle2 = -DraftVecUtils.angle(u2)
if hasattr(obj.ViewObject,"FlipArrows"):
if obj.ViewObject.FlipArrows:
angle1 = angle1+math.pi
angle2 = angle2+math.pi
svg += getArrow(obj.ViewObject.ArrowType,p2,arrowsize,stroke,linewidth,angle1)
svg += getArrow(obj.ViewObject.ArrowType,p3,arrowsize,stroke,linewidth,angle2)
# drawing text
if obj.ViewObject.DisplayMode == "2D":
t = prx.circle.tangentAt(prx.circle.FirstParameter+(prx.circle.LastParameter-prx.circle.FirstParameter)/2.0)
t = getProj(t, plane)
tangle = DraftVecUtils.angle(t)
if (tangle <= -math.pi/2) or (tangle > math.pi/2):
tangle = tangle + math.pi
tbase = getProj(prx.circle.valueAt(prx.circle.FirstParameter+(prx.circle.LastParameter-prx.circle.FirstParameter)/2.0), plane)
tbase = tbase.add(DraftVecUtils.rotate(Vector(0,2.0/scale,0),tangle))
#print(tbase)
else:
tangle = 0
tbase = getProj(prx.tbase, plane)
svg += getText(stroke,fontsize,obj.ViewObject.FontName,tangle,tbase,prx.string)
elif getType(obj) == "Label":
if getattr(obj.ViewObject, "Line", True): # some Labels may have no Line property
def format_point(coords, action='L'):
return "{action}{x},{y}".format(
x=coords.x, y=coords.y, action=action
)
# Draw multisegment line
proj_points = list(map(lambda x: getProj(x, plane), obj.Points))
path_dir_list = [format_point(proj_points[0], action='M')]
path_dir_list += map(format_point, proj_points[1:])
path_dir_str = " ".join(path_dir_list)
svg_path = '<path fill="none" stroke="{stroke}" stroke-width="{linewidth}" d="{directions}"/>'.format(
stroke=stroke,
linewidth=linewidth,
directions=path_dir_str
)
svg += svg_path
# Draw arrow.
# We are different here from 3D view
# if Line is set to 'off', no arrow is drawn
if hasattr(obj.ViewObject, "ArrowType") and len(obj.Points) >= 2:
last_segment = FreeCAD.Vector(obj.Points[-1] - obj.Points[-2])
angle = -DraftVecUtils.angle(getProj(last_segment, plane)) + math.pi
svg += getArrow(
arrowtype=obj.ViewObject.ArrowType,
point=proj_points[-1],
arrowsize=obj.ViewObject.ArrowSize.Value/pointratio,
color=stroke,
linewidth=linewidth,
angle=angle
)
# print text
if gui:
if not obj.ViewObject:
print("export of texts to SVG is only available in GUI mode")
else:
fontname = obj.ViewObject.TextFont
position = getProj(obj.Placement.Base, plane)
rotation = obj.Placement.Rotation
justification = obj.ViewObject.TextAlignment
text = obj.Text
svg += getText(stroke, fontsize, fontname, rotation, position,
text, linespacing, justification)
elif getType(obj) in ["Annotation","DraftText"]:
"returns an svg representation of a document annotation"
if gui:
if not obj.ViewObject:
print ("export of texts to SVG is only available in GUI mode")
else:
n = obj.ViewObject.FontName
if getType(obj) == "Annotation":
p = getProj(obj.Position, plane)
r = obj.ViewObject.Rotation.getValueAs("rad")
t = obj.LabelText
else: # DraftText
p = getProj(obj.Placement.Base, plane)
r = obj.Placement.Rotation
t = obj.Text
j = obj.ViewObject.Justification
svg += getText(stroke,fontsize,n,r,p,t,linespacing,j)
elif getType(obj) == "Axis":
"returns the SVG representation of an Arch Axis system"
if gui:
if not obj.ViewObject:
print ("export of axes to SVG is only available in GUI mode")
else:
vobj = obj.ViewObject
lorig = getLineStyle(linestyle, scale)
fill = 'none'
rad = vobj.BubbleSize.Value/2
n = 0
for e in obj.Shape.Edges:
lstyle = lorig
svg += getPath([e])
lstyle = "none"
pos = ["Start"]
if hasattr(vobj,"BubblePosition"):
if vobj.BubblePosition == "Both":
pos = ["Start","End"]
else:
pos = [vobj.BubblePosition]
for p in pos:
if p == "Start":
p1 = e.Vertexes[0].Point
p2 = e.Vertexes[1].Point
else:
p1 = e.Vertexes[1].Point
p2 = e.Vertexes[0].Point
dv = p2.sub(p1)
dv.normalize()
center = p2.add(dv.scale(rad,rad,rad))
svg += getCircle(Part.makeCircle(rad,center))
if hasattr(vobj.Proxy,"bubbletexts"):
if len (vobj.Proxy.bubbletexts) >= n:
svg += '<text fill="' + stroke + '" '
svg += 'font-size="' + str(rad) + '" '
svg += 'style="text-anchor:middle;'
svg += 'text-align:center;'
svg += 'font-family: sans;" '
svg += 'transform="translate(' + str(center.x+rad/4.0) + ',' + str(center.y-rad/3.0) + ') '
svg += 'scale(1,-1)"> '
svg += '<tspan>' + obj.ViewObject.Proxy.bubbletexts[n].string.getValues()[0] + '</tspan>\n'
svg += '</text>\n'
n += 1
elif getType(obj) == "Pipe":
fill = stroke
lstyle = getLineStyle(linestyle, scale)
if obj.Base and obj.Diameter:
svg += getPath(obj.Base.Shape.Edges)
for f in obj.Shape.Faces:
if len(f.Edges) == 1:
if isinstance(f.Edges[0].Curve,Part.Circle):
svg += getCircle(f.Edges[0])
elif getType(obj) == "Rebar":
fill = "none"
lstyle = getLineStyle(linestyle, scale)
if obj.Proxy:
if not hasattr(obj.Proxy,"wires"):
obj.Proxy.execute(obj)
if hasattr(obj.Proxy,"wires"):
svg += getPath(wires=obj.Proxy.wires)
elif getType(obj) == "PipeConnector":
pass
elif getType(obj) == "Space":
"returns an SVG fragment for the text of a space"
if gui:
if not obj.ViewObject:
print ("export of spaces to SVG is only available in GUI mode")
else:
c = getrgb(obj.ViewObject.TextColor)
n = obj.ViewObject.FontName
a = 0
if rotation != 0:
a = math.radians(rotation)
t1 = obj.ViewObject.Proxy.text1.string.getValues()
t2 = obj.ViewObject.Proxy.text2.string.getValues()
scale = obj.ViewObject.FirstLine.Value/obj.ViewObject.FontSize.Value
f1 = fontsize*scale
p2 = FreeCAD.Vector(obj.ViewObject.Proxy.coords.translation.getValue().getValue())
lspc = FreeCAD.Vector(obj.ViewObject.Proxy.header.translation.getValue().getValue())
p1 = p2.add(lspc)
j = obj.ViewObject.TextAlign
svg += getText(c,f1,n,a,getProj(p1, plane),t1,linespacing,j,flip=True)
if t2:
ofs = FreeCAD.Vector(0,lspc.Length,0)
if a:
ofs = FreeCAD.Rotation(FreeCAD.Vector(0,0,1),-rotation).multVec(ofs)
svg += getText(c,fontsize,n,a,getProj(p1, plane).add(ofs),t2,linespacing,j,flip=True)
elif obj.isDerivedFrom('Part::Feature'):
if obj.Shape.isNull():
return ''
# setting fill
if obj.Shape.Faces:
if gui:
try:
m = obj.ViewObject.DisplayMode
except AttributeError:
m = None
if (m != "Wireframe"):
if fillstyle == "shape color":
fill = getrgb(obj.ViewObject.ShapeColor,testbw=False)
fill_opacity = 1 - (obj.ViewObject.Transparency / 100.0)
else:
fill = 'url(#'+fillstyle+')'
svg += getPattern(fillstyle)
else:
fill = "none"
else:
fill = "#888888"
else:
fill = 'none'
lstyle = getLineStyle(linestyle, scale)
if len(obj.Shape.Vertexes) > 1:
wiredEdges = []
if obj.Shape.Faces:
for i,f in enumerate(obj.Shape.Faces):
svg += getPath(wires=f.Wires,pathname='%s_f%04d' % \
(obj.Name,i))
wiredEdges.extend(f.Edges)
else:
for i,w in enumerate(obj.Shape.Wires):
svg += getPath(w.Edges,pathname='%s_w%04d' % \
(obj.Name,i))
wiredEdges.extend(w.Edges)
if len(wiredEdges) != len(obj.Shape.Edges):
for i,e in enumerate(obj.Shape.Edges):
if (DraftGeomUtils.findEdge(e,wiredEdges) == None):
svg += getPath([e],pathname='%s_nwe%04d' % \
(obj.Name,i))
else:
# closed circle or spline
if obj.Shape.Edges:
if isinstance(obj.Shape.Edges[0].Curve,Part.Circle):
svg = getCircle(obj.Shape.Edges[0])
else:
svg = getPath(obj.Shape.Edges)
if FreeCAD.GuiUp:
if hasattr(obj.ViewObject,"EndArrow") and hasattr(obj.ViewObject,"ArrowType") and (len(obj.Shape.Vertexes) > 1):
if obj.ViewObject.EndArrow:
p1 = getProj(obj.Shape.Vertexes[-2].Point, plane)
p2 = getProj(obj.Shape.Vertexes[-1].Point, plane)
angle = -DraftVecUtils.angle(p2.sub(p1))
arrowsize = obj.ViewObject.ArrowSize.Value/pointratio
svg += getArrow(obj.ViewObject.ArrowType,p2,arrowsize,stroke,linewidth,angle)
# techdraw expects bottom-to-top coordinates
if techdraw:
svg = '<g transform ="scale(1,-1)">'+svg+'</g>'
return svg
def execute(self,obj):
import Part, math, DraftGeomUtils
pl = obj.Placement
self.baseface = None
base = None
if obj.Base and obj.Angles:
w = None
if obj.Base.isDerivedFrom("Part::Feature"):
if (obj.Base.Shape.Faces and obj.Face):
w = obj.Base.Shape.Faces[obj.Face-1].Wires[0]
elif obj.Base.Shape.Wires:
w = obj.Base.Shape.Wires[0]
if w:
if w.isClosed():
self.profilsDico = []
self.shps = []
self.subVolshps = []
heights = []
edges = DraftGeomUtils.sortEdges(w.Edges)
l = len(edges)
print("le contour contient "+str(l)+" aretes")
for i in range(l):
self.makeRoofProfilsDic(i, obj.Angles[i], obj.Runs[i], obj.IdRel[i], obj.Overhang[i], obj.Thickness[i])
for i in range(l):
self.calcMissingData(i)
for p in self.profilsDico:
heights.append(p["height"])
obj.Heights = heights
for i in range(l):
edgesForward = edges[:]
edgesForward.append(edges[0])
ptsPaneProject=[]
profil0 =self.profilsDico[i-1]
profil1 =self.profilsDico[i]
if i == l-1:
profil2 =self.profilsDico[0]
else:
profil2 =self.profilsDico[i+1]
vec0 = edges[i-1].Vertexes[-1].Point.sub(edges[i-1].Vertexes[0].Point)
vec1 = edges[i].Vertexes[-1].Point.sub(edges[i].Vertexes[0].Point)
vec2 = edgesForward[i+1].Vertexes[-1].Point.sub(edgesForward[i+1].Vertexes[0].Point)
rotEdge0 = math.degrees(DraftVecUtils.angle(vec0))
rotEdge1 = math.degrees(DraftVecUtils.angle(vec1))
rotEdge2 = math.degrees(DraftVecUtils.angle(vec2))
edgeEave0 = DraftGeomUtils.offset(edges[i-1],self.getPerpendicular(vec0,rotEdge0,profil0["overhang"]).negative())
edgeEave1 = DraftGeomUtils.offset(edges[i],self.getPerpendicular(vec1,rotEdge1,profil1["overhang"]).negative())
edgeEave2 = DraftGeomUtils.offset(edgesForward[i+1],self.getPerpendicular(vec2,rotEdge2,profil2["overhang"]).negative())
pt0Eave1 = DraftGeomUtils.findIntersection(edgeEave0,edgeEave1,infinite1=True,infinite2=True,)
pt1Eave1 = DraftGeomUtils.findIntersection(edgeEave1,edgeEave2,infinite1=True,infinite2=True,)
edgeEave1 = DraftGeomUtils.edg(FreeCAD.Vector(pt0Eave1[0]),FreeCAD.Vector(pt1Eave1[0]))
edgeRidge0 = DraftGeomUtils.offset(edges[i-1],self.getPerpendicular(vec0,rotEdge0,profil0["run"]))
edgeRidge1 = DraftGeomUtils.offset(edges[i],self.getPerpendicular(vec1,rotEdge1,profil1["run"]))
edgeRidge2 = DraftGeomUtils.offset(edgesForward[i+1],self.getPerpendicular(vec2,rotEdge2,profil2["run"]))
midpoint = DraftGeomUtils.findMidpoint(edges[i])
pt0Edge1 = edges[i].Vertexes[0].Point
pt1Edge1 = edges[i].Vertexes[-1].Point
print("Analyse profil " + str(i))
if profil1["angle"] != 90.:
if profil2["angle"] == 90. :
print("situation a droite : pignon")
ptsPaneProject.append(FreeCAD.Vector(pt1Eave1[0]))
point = DraftGeomUtils.findIntersection(edgeRidge1,edgeEave2,infinite1=True,infinite2=True,)
ptsPaneProject.append(FreeCAD.Vector(point[0]))
elif profil1["height"] == profil2["height"] :
print("situation a droite : ht1 = ht2")
ptInterRidges = DraftGeomUtils.findIntersection(edgeRidge1,edgeRidge2,infinite1=True,infinite2=True,)
edgeHip = DraftGeomUtils.edg(FreeCAD.Vector(ptInterRidges[0]),pt1Edge1)
ptInterHipEave1 = DraftGeomUtils.findIntersection(edgeHip,edgeEave1,infinite1=True,infinite2=False,)
if ptInterHipEave1:
ptsPaneProject.append(FreeCAD.Vector(ptInterHipEave1[0]))
else:
ptInterHipEave2 = DraftGeomUtils.findIntersection(edgeHip,edgeEave2,infinite1=True,infinite2=True,)
ptsPaneProject.append(FreeCAD.Vector(pt1Eave1[0]))
ptsPaneProject.append(FreeCAD.Vector(ptInterHipEave2[0]))
ptsPaneProject.append(FreeCAD.Vector(ptInterRidges[0]))
elif profil1["height"] > profil2["height"]:
print("situation a droite : ht1 > ht2")
dec = profil2["height"]/math.tan(math.radians(profil1["angle"]))
edgeRidge2OnPane = DraftGeomUtils.offset(edges[i],self.getPerpendicular(vec1,rotEdge1,dec))
ptInter1 = DraftGeomUtils.findIntersection(edgeRidge2,edgeRidge2OnPane,infinite1=True,infinite2=True,)
edgeHip = DraftGeomUtils.edg(FreeCAD.Vector(ptInter1[0]),pt1Edge1)
ptInterHipEave1 = DraftGeomUtils.findIntersection(edgeHip,edgeEave1,infinite1=True,infinite2=False,)
if ptInterHipEave1:
ptsPaneProject.append(FreeCAD.Vector(ptInterHipEave1[0]))
else:
ptInterHipEave2 = DraftGeomUtils.findIntersection(edgeHip,edgeEave2,infinite1=True,infinite2=True,)
ptsPaneProject.append(FreeCAD.Vector(pt1Eave1[0]))
ptsPaneProject.append(FreeCAD.Vector(ptInterHipEave2[0]))
ptsPaneProject.append(FreeCAD.Vector(ptInter1[0]))
ptInter2 = edgeHip.Vertexes[0].Point
vecInterRidges = DraftGeomUtils.findPerpendicular(ptInter2, [edgeRidge1.Edges[0],], force=0)
ptInterRidges = ptInter2.add(vecInterRidges[0])
ptsPaneProject.append(FreeCAD.Vector(ptInterRidges))
elif profil1["height"] < profil2["height"]:
print("situation a droite : ht1 < ht2")
dec = profil1["height"]/math.tan(math.radians(profil2["angle"]))
edgeRidge2OnPane = DraftGeomUtils.offset(edgesForward[i+1],self.getPerpendicular(vec2,rotEdge2,dec))
ptInter1 = DraftGeomUtils.findIntersection(edgeRidge1,edgeRidge2OnPane,infinite1=True,infinite2=True,)
edgeHip = DraftGeomUtils.edg(FreeCAD.Vector(ptInter1[0]),pt1Edge1)
ptInterHipEave1 = DraftGeomUtils.findIntersection(edgeHip,edgeEave1,infinite1=True,infinite2=False,)
if ptInterHipEave1:
ptsPaneProject.append(FreeCAD.Vector(ptInterHipEave1[0]))
else:
ptInterHipEave2 = DraftGeomUtils.findIntersection(edgeHip,edgeEave2,infinite1=True,infinite2=True,)
ptsPaneProject.append(FreeCAD.Vector(pt1Eave1[0]))
ptsPaneProject.append(FreeCAD.Vector(ptInterHipEave2[0]))
ptsPaneProject.append(FreeCAD.Vector(ptInter1[0]))
ptInterRidges = DraftGeomUtils.findIntersection(edgeRidge1,edgeRidge2,infinite1=True,infinite2=True,)
ptsPaneProject.append(FreeCAD.Vector(ptInterRidges[0]))
else:
print("Cas de figure non pris en charge")
if profil0["angle"] == 90. :
print("situation a gauche : pignon")
point = DraftGeomUtils.findIntersection(edgeRidge1,edgeEave0,infinite1=True,infinite2=True,)
ptsPaneProject.append(FreeCAD.Vector(point[0]))
ptsPaneProject.append(FreeCAD.Vector(pt0Eave1[0]))
elif profil0["height"] == profil1["height"]:
print("situation a gauche : ht1 = ht0")
edgeRidge0 = DraftGeomUtils.offset(edges[i-1],self.getPerpendicular(vec0,rotEdge0,profil0["run"]))
ptInterRidges = DraftGeomUtils.findIntersection(edgeRidge1,edgeRidge0,infinite1=True,infinite2=True,)
ptsPaneProject.append(FreeCAD.Vector(ptInterRidges[0]))
edgeHip = DraftGeomUtils.edg(FreeCAD.Vector(ptInterRidges[0]),pt0Edge1)
ptInterHipEave3 = DraftGeomUtils.findIntersection(edgeHip,edgeEave1,infinite1=True,infinite2=False,)
if ptInterHipEave3:
ptsPaneProject.append(FreeCAD.Vector(ptInterHipEave3[0]))
else:
ptInterHipEave4 = DraftGeomUtils.findIntersection(edgeHip,edgeEave0,infinite1=True,infinite2=True,)
ptsPaneProject.append(FreeCAD.Vector(ptInterHipEave4[0]))
ptsPaneProject.append(FreeCAD.Vector(pt0Eave1[0]))
elif profil1["height"] > profil0["height"]:
print("situation a gauche : ht1 > ht0")
dec = profil0["height"]/math.tan(math.radians(profil1["angle"]))
edgeRidge0OnPane = DraftGeomUtils.offset(edges[i],self.getPerpendicular(vec1,rotEdge1,dec))
ptInter1 = DraftGeomUtils.findIntersection(edgeRidge0OnPane,edgeRidge0,infinite1=True,infinite2=True,)
edgeHip = DraftGeomUtils.edg(FreeCAD.Vector(ptInter1[0]),pt0Edge1)
ptInter2 = edgeHip.Vertexes[0].Point
vecInterRidges = DraftGeomUtils.findPerpendicular(ptInter2, [edgeRidge1.Edges[0],], force=0)
ptInterRidges = ptInter2.add(vecInterRidges[0])
ptsPaneProject.append(FreeCAD.Vector(ptInterRidges))
ptsPaneProject.append(FreeCAD.Vector(ptInter1[0]))
ptInterHipEave3 = DraftGeomUtils.findIntersection(edgeHip,edgeEave1,infinite1=True,infinite2=False,)
if ptInterHipEave3:
ptsPaneProject.append(FreeCAD.Vector(ptInterHipEave3[0]))
else:
ptInterHipEave4 = DraftGeomUtils.findIntersection(edgeHip,edgeEave0,infinite1=True,infinite2=True,)
ptsPaneProject.append(FreeCAD.Vector(ptInterHipEave4[0]))
ptsPaneProject.append(FreeCAD.Vector(pt0Eave1[0]))
elif profil1["height"] < profil0["height"]:
print("situation a gauche : ht1 < ht0")
dec = profil1["height"]/math.tan(math.radians(profil0["angle"]))
edgeRidge0OnPane = DraftGeomUtils.offset(edges[i-1],self.getPerpendicular(vec0,rotEdge0,dec))
ptInterRidges = DraftGeomUtils.findIntersection(edgeRidge0OnPane,edgeRidge1,infinite1=True,infinite2=True,)
ptsPaneProject.append(FreeCAD.Vector(ptInterRidges[0]))
edgeHip = DraftGeomUtils.edg(FreeCAD.Vector(ptInterRidges[0]),pt0Edge1)
ptInterHipEave3 = DraftGeomUtils.findIntersection(edgeHip,edgeEave1,infinite1=True,infinite2=False,)
if ptInterHipEave3:
ptsPaneProject.append(FreeCAD.Vector(ptInterHipEave3[0]))
else:
ptInterHipEave4 = DraftGeomUtils.findIntersection(edgeHip,edgeEave0,infinite1=True,infinite2=True,)
ptsPaneProject.append(FreeCAD.Vector(ptInterHipEave4[0]))
ptsPaneProject.append(FreeCAD.Vector(pt0Eave1[0]))
else:
print("Cas de figure non pris en charge")
ptsPaneProject = DraftVecUtils.removeDoubles(ptsPaneProject)
print("ptsPaneProject",ptsPaneProject)
print("Fin Analyse profil " + str(i))
self.profilsDico[i]["points"] = ptsPaneProject
lp = len(ptsPaneProject)
ptsPaneProject.append(ptsPaneProject[0])
edgesWire = []
for i in range(lp):
edge = Part.makeLine(ptsPaneProject[i],ptsPaneProject[i+1])
edgesWire.append(edge)
wire = Part.Wire(edgesWire)
d = wire.BoundBox.DiagonalLength
thicknessV = profil1["thickness"]/(math.cos(math.radians(profil1["angle"])))
overhangV = profil1["overhang"]*math.tan(math.radians(profil1["angle"]))
if wire.isClosed():
f = Part.Face(wire)
f = f.extrude(FreeCAD.Vector(0,0,profil1["height"]+2*thicknessV+2*overhangV))
f.translate(FreeCAD.Vector(0.0,0.0,-2*overhangV))
ptsPaneProfil=[FreeCAD.Vector(-profil1["overhang"],-overhangV,0.0),FreeCAD.Vector(profil1["run"],profil1["height"],0.0),FreeCAD.Vector(profil1["run"],profil1["height"]+thicknessV,0.0),FreeCAD.Vector(-profil1["overhang"],-overhangV+thicknessV,0.0)]
self.createProfilShape (ptsPaneProfil, midpoint, rotEdge1, vec1, profil1["run"], d, self.shps, f)
## subVolume shape
ptsSubVolumeProfil=[FreeCAD.Vector(-profil1["overhang"],-overhangV,0.0),FreeCAD.Vector(profil1["run"],profil1["height"],0.0),FreeCAD.Vector(profil1["run"],profil1["height"]+10000,0.0),FreeCAD.Vector(0.0,profil1["height"]+10000,0.0)]
self.createProfilShape (ptsSubVolumeProfil, midpoint, rotEdge1, vec1, profil1["run"], d, self.subVolshps, f)
else:
#TODO PIGNON
pass
## SubVolume
self.sub = self.subVolshps.pop()
for s in self.subVolshps:
self.sub = self.sub.fuse(s)
self.sub = self.sub.removeSplitter()
if not self.sub.isNull():
if not DraftGeomUtils.isNull(pl):
self.sub.Placement = pl
## BaseVolume
base = Part.makeCompound(self.shps)
if not base.isNull():
if not DraftGeomUtils.isNull(pl):
base.Placement = pl
base = self.processSubShapes(obj,base)
if base:
if not base.isNull():
obj.Shape = base
def getPath(edges=[],wires=[],pathname=None):
import Part,DraftGeomUtils
svg = "<path "
if pathname is None:
svg += 'id="%s" ' % obj.Name
elif pathname != "":
svg += 'id="%s" ' % pathname
svg += ' d="'
if not wires:
egroups = Part.sortEdges(edges)
else:
egroups = []
for w in wires:
w1=w.copy()
w1.fixWire()
egroups.append(Part.__sortEdges__(w1.Edges))
for egroupindex, edges in enumerate(egroups):
edata = ""
vs=() #skipped for the first edge
for edgeindex,e in enumerate(edges):
previousvs = vs
# vertexes of an edge (reversed if needed)
vs = e.Vertexes
if previousvs:
if (vs[0].Point-previousvs[-1].Point).Length > 1e-6:
vs.reverse()
if edgeindex == 0:
v = getProj(vs[0].Point, plane)
edata += 'M '+ str(v.x) +' '+ str(v.y) + ' '
else:
if (vs[0].Point-previousvs[-1].Point).Length > 1e-6:
raise ValueError('edges not ordered')
iscircle = DraftGeomUtils.geomType(e) == "Circle"
isellipse = DraftGeomUtils.geomType(e) == "Ellipse"
if iscircle or isellipse:
import math
if hasattr(FreeCAD,"DraftWorkingPlane"):
drawing_plane_normal = FreeCAD.DraftWorkingPlane.axis
else:
drawing_plane_normal = FreeCAD.Vector(0,0,1)
if plane: drawing_plane_normal = plane.axis
c = e.Curve
if round(c.Axis.getAngle(drawing_plane_normal),2) in [0,3.14]:
occversion = Part.OCC_VERSION.split(".")
done = False
if (int(occversion[0]) >= 7) and (int(occversion[1]) >= 1):
# if using occ >= 7.1, use HLR algorithm
import Drawing
snip = Drawing.projectToSVG(e,drawing_plane_normal)
if snip:
try:
a = "A " + snip.split("path d=\"")[1].split("\"")[0].split("A")[1]
except:
pass
else:
edata += a
done = True
if not done:
if len(e.Vertexes) == 1 and iscircle: #complete curve
svg = getCircle(e)
return svg
elif len(e.Vertexes) == 1 and isellipse:
#svg = getEllipse(e)
#return svg
endpoints = (getProj(c.value((c.LastParameter-\
c.FirstParameter)/2.0), plane), \
getProj(vs[-1].Point, plane))
else:
endpoints = (getProj(vs[-1].Point), plane)
# arc
if iscircle:
rx = ry = c.Radius
rot = 0
else: #ellipse
rx = c.MajorRadius
ry = c.MinorRadius
rot = math.degrees(c.AngleXU * (c.Axis * \
FreeCAD.Vector(0,0,1)))
if rot > 90:
rot -=180
if rot < -90:
rot += 180
#be careful with the sweep flag
flag_large_arc = (((e.ParameterRange[1] - \
e.ParameterRange[0]) / math.pi) % 2) > 1
#flag_sweep = (c.Axis * drawing_plane_normal >= 0) \
# == (e.LastParameter > e.FirstParameter)
# == (e.Orientation == "Forward")
# other method: check the direction of the angle between tangents
t1 = e.tangentAt(e.FirstParameter)
t2 = e.tangentAt(e.FirstParameter + (e.LastParameter-e.FirstParameter)/10)
flag_sweep = (DraftVecUtils.angle(t1,t2,drawing_plane_normal) < 0)
for v in endpoints:
edata += 'A %s %s %s %s %s %s %s ' % \
(str(rx),str(ry),str(rot),\
str(int(flag_large_arc)),\
str(int(flag_sweep)),str(v.x),str(v.y))
else:
edata += getDiscretized(e, plane)
elif DraftGeomUtils.geomType(e) == "Line":
v = getProj(vs[-1].Point, plane)
edata += 'L '+ str(v.x) +' '+ str(v.y) + ' '
else:
bspline=e.Curve.toBSpline(e.FirstParameter,e.LastParameter)
if bspline.Degree > 3 or bspline.isRational():
try:
bspline=bspline.approximateBSpline(0.05,50, 3,'C0')
except RuntimeError:
print("Debug: unable to approximate bspline")
if bspline.Degree <= 3 and not bspline.isRational():
for bezierseg in bspline.toBezier():
if bezierseg.Degree>3: #should not happen
raise AssertionError
elif bezierseg.Degree==1:
edata +='L '
elif bezierseg.Degree==2:
edata +='Q '
elif bezierseg.Degree==3:
edata +='C '
for pole in bezierseg.getPoles()[1:]:
v = getProj(pole, plane)
edata += str(v.x) +' '+ str(v.y) + ' '
else:
print("Debug: one edge (hash ",e.hashCode(),\
") has been discretized with parameter 0.1")
for linepoint in bspline.discretize(0.1)[1:]:
v = getProj(linepoint, plane)
edata += 'L '+ str(v.x) +' '+ str(v.y) + ' '
if fill != 'none':
edata += 'Z '
if edata in pathdata:
# do not draw a path on another identical path
return ""
else:
svg += edata
pathdata.append(edata)
svg += '" '
svg += 'stroke="' + stroke + '" '
svg += 'stroke-width="' + str(linewidth) + ' px" '
svg += 'style="stroke-width:'+ str(linewidth)
svg += ';stroke-miterlimit:4'
svg += ';stroke-dasharray:' + lstyle
svg += ';fill:' + fill
try:
svg += ';fill-opacity:' + str(fill_opacity)
except NameError:
pass
svg += ';fill-rule: evenodd "'
svg += '/>\n'
return svg
