def PassThroughAudioSegment(tmpFilePath, edit, backplane_name):
"""\
Prefab.
For a particular edit decision; reads in the audio frames corresponding to
the video frames referred to in the reframing instructions in sequence.
Outputs the audio frames out of the "outbox" outbox.
Arguments:
- edlfile -- full filepathname of the EDL xml file
- tmpFilePath -- temp directory into which video frames have been saved
Inboxes:
- "inbox" -- NOT USED
- "control" -- Shutdown signalling
Outboxes:
- "outbox" -- raw audio data, chunked by frames
- "signal" -- Shutdown signalling
"""
print " Audio segment: ", edit
filenames = [
tmpFilePath + "%08d.wav" % i
for i in range(edit["start"], edit["end"] + 1)
]
return Graphline( \
FILENAMES = ForwardIteratingChooser(filenames),
FRAME_LOADER = Carousel( lambda filename :
Graphline(
READ = MaxSpeedFileReader(filename),
PARS = WAVParser(),
META = PublishTo(backplane_name),
linkages = {
("READ","outbox") : ("PARS","inbox"),
("PARS","outbox") : ("","outbox"),
("PARS","all_meta") : ("META","inbox"),
("","control") : ("READ","control"),
("READ","signal") : ("PARS","control"),
("PARS","signal") : ("META","control"),
("META","signal") : ("","signal"),
},
boxsizes = { ("PARS","inbox") : 2 },
),
make1stRequest=False ),
linkages = {
("FRAME_LOADER", "requestNext") : ("FILENAMES", "inbox"),
("FILENAMES", "outbox") : ("FRAME_LOADER", "next"),
("FRAME_LOADER", "outbox") : ("", "outbox"),
("FILENAMES", "signal") : ("FRAME_LOADER", "control"),
("FRAME_LOADER", "signal") : ("", "signal"),
},
)
def ProcessEditDecision(tmpFilePath, edit, width, height):
"""\
Prefab.
Applies an edit decision - reading in the relevant video frames and applying
the reframing. Outputs the reframed video frames out of the "outbox" outbox.
Arguments:
- tmpFilePath -- temp directory into which video frames have been saved
- edit -- the edit instruction (dictionary containing: "start","end","left","top","right","bottom")
- width -- width (in pixels) for output video frames
- height -- height (in pixels) for output video frames
Inboxes:
- "inbox" -- NOT USED
- "control" -- Shutdown signalling
Outboxes:
- "outbox" -- NOT USED
- "signal" -- Shutdown signalling
"""
print " Video segment: ", edit
filenames = [
tmpFilePath + "%08d.yuv" % i
for i in range(edit["start"], edit["end"] + 1)
]
newsize = (width, height)
cropbounds = (edit["left"], edit["top"], edit["right"], edit["bottom"])
return Graphline( \
FILENAMES = ForwardIteratingChooser(filenames),
FRAME_LOADER = Carousel( lambda filename :
Pipeline(
2, MaxSpeedFileReader(filename,chunksize=1024*1024),
2, YUV4MPEGToFrame(),
),
make1stRequest=False ),
REFRAMING = Pipeline( 2, ToRGB_interleaved(),
2, CropAndScale(newsize, cropbounds),
2, ToYUV420_planar(),
),
linkages = {
("FRAME_LOADER", "requestNext") : ("FILENAMES", "inbox"),
("FILENAMES", "outbox") : ("FRAME_LOADER", "next"),
("FRAME_LOADER", "outbox") : ("REFRAMING", "inbox"),
("REFRAMING", "outbox") : ("", "outbox"),
("FILENAMES", "signal") : ("FRAME_LOADER", "control"),
("FRAME_LOADER", "signal") : ("REFRAMING", "control"),
("REFRAMING", "signal") : ("", "signal"),
},
boxsizes = {
},
)
def SaveAudioFrames(frame_rate,tmpFilePath,edlfile):
"""\
Prefab.
Saves WAV audio data sent to the "inbox" inbox into the specified temp
directory. Chunks the audio into frames, as per the specified frame-rate.
Only saves those frames actually referenced in the EDL file.
Frames are saved in individual files in WAV format. They are named
sequentially "00000001.wav", "00000002.wav", "00000003.wav", etc - being
assigned frame numbers as they arrive, starting at 1.
Arguments:
- frame_rate -- the frame rate to chunk the audio into for saving
- tmpFilePath -- temp directory into which frames should be saved
- edlfile -- full filepathname of the EDL xml file
Inboxes:
- "inbox" -- WAV format audio data
- "control" -- Shutdown signalling
Outboxes:
- "outbox" -- NOT USED
- "signal" -- Shutdown signalling
"""
return \
Graphline(
WAV = WAVParser(),
AUD = Carousel(
lambda ameta : AudioSplitterByFrames( frame_rate,
ameta['channels'],
ameta['sample_rate'],
ameta['sample_format'],
tmpFilePath,
edlfile,
)
),
linkages = {
# incoming WAV file passed to decoder
("", "inbox") : ("WAV", "inbox"),
# raw audio sent to the carousel for splitting and writing
("WAV", "outbox") : ("AUD", "inbox"),
# pass audio format info to the carousel
("WAV", "all_meta") : ("AUD", "next"),
("", "control") : ("WAV", "control"),
("WAV", "signal") : ("AUD", "control"),
},
boxsizes = {
("WAV", "inbox") : 10,
("AUD", "inbox") : 10,
},
)
def FrameRateLimitedPlayback(player):
def RateLimitedPlayback(frame):
fps = frame["frame_rate"]
x, y = tuple(frame["size"])
print "Frames per second:", fps
print "(width,height):", (x, y)
pgd = PygameDisplay(width=x, height=y).activate()
PygameDisplay.setDisplayService(pgd)
return Graphline( \
LIMIT = PromptedTurnstile(),
RATE = ByteRate_RequestControl(rate=fps, chunksize=1.0, allowchunkaggregation=False),
PLAY = player,
linkages = {
("", "inbox" ) : ("LIMIT", "inbox"),
("LIMIT", "outbox") : ("PLAY", "inbox"),
("PLAY", "outbox") : ("", "outbox"),
("RATE", "outbox" ) : ("LIMIT", "next"),
("", "control") : ("RATE", "control"),
("RATE", "signal" ) : ("LIMIT", "control"),
("LIMIT", "signal" ) : ("PLAY", "control"),
("PLAY", "signal" ) : ("", "signal"),
},
boxsizes = {
("LIMIT","inbox") : 2,
},
)
return Graphline(\
SPLIT = TwoWaySplitter(),
FIRST = FirstOnly(),
PLAY = Carousel(RateLimitedPlayback),
linkages = {
("", "inbox" ) : ("SPLIT", "inbox"),
("SPLIT", "outbox" ) : ("FIRST", "inbox"),
("FIRST", "outbox" ) : ("PLAY", "next"),
("SPLIT", "outbox2") : ("PLAY", "inbox"),
("PLAY", "outbox" ) : ("", "outbox"),
("", "control") : ("SPLIT", "control"),
("SPLIT", "signal" ) : ("FIRST", "control"),
("SPLIT", "signal2") : ("PLAY", "control"),
("PLAY", "signal" ) : ("", "signal"),
},
boxsizes = {
("SPLIT","inbox") : 1,
},
)
def FilterForWantedFrameNumbers(edlfile):
"""\
Prefab.
Send messages of the form (framenum, data) to the "inbox" inbox. Items with
a frame number that isn't in the edit decision list are dropped. Other items
with frame numbers that are in the edit decision list are passed through out
of the "outbox" outbox.
Arguments:
- edlfile -- full filepathname of the EDL xml file
Inboxes:
- "inbox" -- (framenum, data) items to be filtered
- "control" -- Shutdown signalling
Outboxes:
- "outbox" -- items not filtered out
- "signal" -- Shutdown signalling
"""
class ExtractRanges(object):
def filter(self, edit):
try:
return (edit['start'],edit['end'])
except:
return None
return Graphline(
RANGESRC = Pipeline(
RateControlledFileReader(edlfile,readmode="lines",rate=1000000),
SimpleXMLParser(),
EDLParser(),
Filter(filter = ExtractRanges()),
Collate(),
),
FILTER = Carousel(lambda ranges : RangeFilter(ranges)),
linkages = {
("RANGESRC","outbox") : ("FILTER","next"),
("","inbox") : ("FILTER","inbox"),
("FILTER","outbox") : ("","outbox"),
("","control") : ("FILTER","control"),
("FILTER","signal") :("","signal"),
},
)
def PassThroughAudio(edlfile, tmpFilePath):
"""\
Prefab.
Goes through the specified edit decision list file and reads in the audio
frames corresponding to the video frames referred to in the reframing
instructions in sequence. Outputs the audio frames out of the "outbox"
outbox.
Arguments:
- edlfile -- full filepathname of the EDL xml file
- tmpFilePath -- temp directory into which video frames have been saved
Inboxes:
- "inbox" -- NOT USED
- "control" -- Shutdown signalling
Outboxes:
- "outbox" -- raw audio data, chunked by frames
- "signal" -- Shutdown signalling
"""
backplane_name = "AUDIO_FORMAT"
return Graphline( \
GET_EDL = EditDecisionSource(edlfile),
AUDIO = Carousel( lambda edit : PassThroughAudioSegment(tmpFilePath, edit, backplane_name),
make1stRequest=True),
BACKPLANE = Backplane(backplane_name),
AUDIOFORMAT = Pipeline( SubscribeTo(backplane_name), FirstOnly() ),
linkages = {
("AUDIO", "requestNext") : ("GET_EDL", "inbox"),
("GET_EDL", "outbox") : ("AUDIO", "next"),
("AUDIO", "outbox") : ("", "outbox"),
("AUDIOFORMAT", "outbox") : ("", "audioformat"),
("GET_EDL", "signal") : ("AUDIO", "control"),
("AUDIO", "signal") : ("AUDIOFORMAT", "control"),
("AUDIOFORMAT", "signal") : ("BACKPLANE", "control"),
("BACKPLANE", "signal") : ("", "signal"),
},
)
def ReframeVideo(edlfile, tmpFilePath, width, height):
"""\
Prefab.
Goes through the specified edit decision list file and reads in video frames
applying the reframing instructions in sequence. Outputs the reframed video
frames out of the "outbox" outbox.
Arguments:
- tmpFilePath -- temp directory into which video frames have been saved
- edlfile -- full filepathname of the EDL xml file
- width -- width (in pixels) for output video frames
- height -- height (in pixels) for output video frames
Inboxes:
- "inbox" -- NOT USED
- "control" -- Shutdown signalling
Outboxes:
- "outbox" -- NOT USED
- "signal" -- Shutdown signalling
"""
return Graphline( \
GET_EDL = EditDecisionSource(edlfile),
REFRAMER = Carousel( lambda edit : ProcessEditDecision(tmpFilePath, edit, width, height),
make1stRequest=True ),
linkages = {
("REFRAMER", "requestNext") : ("GET_EDL", "inbox"),
("GET_EDL", "outbox") : ("REFRAMER", "next"),
("REFRAMER", "outbox") : ("", "outbox"),
("GET_EDL", "signal") : ("REFRAMER", "control"),
("REFRAMER", "signal") : ("", "signal"),
},
)
def ReEncode(outFileName):
"""\
Prefab.
Takes in audio and video frames and encodes them to a compressed video file
using ffmpeg to do the compression.
Inboxes:
- "inbox" -- NOT USED
- "control" -- Shutdown signalling
- "video" -- Video frames to be saved
- "audio" -- Auio frames to be saved
Outboxes:
- "outbox" -- NOT USED
- "signal" -- Shutdown signalling
"""
vidpipe = tmpFilePath+"vidPipe2.yuv"
try:
os.remove(vidpipe)
except:
pass
audpipe = tmpFilePath+"audPipe2.wav"
try:
os.remove(audpipe)
except:
pass
vidpipe=vidpipe.replace(" ","\ ")
audpipe=audpipe.replace(" ","\ ")
outFileName=outFileName.replace(" ","\ ")
encoder = "ffmpeg -f yuv4mpegpipe -i "+vidpipe+" -f wav -i "+audpipe+" -y "+outFileName
print encoder
return Graphline( \
VIDEO = FrameToYUV4MPEG(),
AUDIO = Carousel( lambda format : WAVWriter(**format),
make1stRequest=False),
ENCODE = UnixProcess2(encoder,buffersize=327680,inpipes={vidpipe:"video",audpipe:"audio"},boxsizes={"inbox":2,"video":2,"audio":2}),
DEBUG = ConsoleEchoer(),
linkages = {
("","audioformat") : ("AUDIO","next"),
("","video") : ("VIDEO","inbox"),
("VIDEO","outbox") : ("ENCODE","video"),
("","audio") : ("AUDIO", "inbox"),
("AUDIO","outbox") : ("ENCODE", "audio"),
("","control") : ("VIDEO","control"),
("VIDEO","signal") : ("AUDIO","control"),
("AUDIO","signal") : ("ENCODE", "control"),
("ENCODE", "signal") : ("DEBUG", "control"),
("DEBUG", "signal") : ("", "signal"),
("ENCODE","outbox") : ("DEBUG","inbox"),
("ENCODE","error") : ("DEBUG","inbox"),
},
boxsizes = {
("VIDEO", "inbox") : 2,
("AUDIO", "inbox") : 2,
}
)
def DecodeAndSeparateFrames(inFileName, tmpFilePath, edlfile,maxframe):
"""\
Prefab.
Decompresses audio and video from the specified file (using ffmpeg) and
saves them as individual files into the provided temp directory. Only
reads up to maxframes frames from the video file.
Arguments:
- inFileName -- The video file to be decompressed
- tmpFilePath -- temp directory into which frames of audio and video should be saved
- edlfile -- full filepathname of the EDL xml file
- maxframe -- the number of frames to decompress
Inboxes:
- "inbox" -- NOT USED
- "control" -- Shutdown signalling
Outboxes:
- "outbox" -- NOT USED
- "signal" -- Shutdown signalling
"""
vidpipe = tmpFilePath+"vidPipe.yuv"
try:
os.remove(vidpipe)
except:
pass
audpipe = tmpFilePath+"audPipe.wav"
try:
os.remove(audpipe)
except:
pass
mplayer = "ffmpeg -vframes %d -i %s -f yuv4mpegpipe -y %s -f wav -y %s" % ((maxframe+25),inFileName.replace(" ","\ "),vidpipe,audpipe)
print mplayer
return Graphline(
DECODER = UnixProcess2(mplayer, 2000000, {vidpipe:"video",audpipe:"audio"}),
FRAMES = YUV4MPEGToFrame(),
SPLIT = TwoWaySplitter(),
FIRST = FirstOnly(),
VIDEO = SaveVideoFrames(tmpFilePath,edlfile),
AUDIO = Carousel(lambda vformat: SaveAudioFrames(vformat['frame_rate'],tmpFilePath,edlfile)),
linkages = {
("DECODER","video") : ("FRAMES","inbox"),
("FRAMES","outbox") : ("SPLIT","inbox"),
("SPLIT","outbox") : ("VIDEO","inbox"),
("SPLIT","outbox2") : ("FIRST","inbox"),
("FIRST","outbox") : ("AUDIO","next"),
("DECODER","audio") : ("AUDIO","inbox"),
("DECODER","signal") : ("FRAMES","control"),
("FRAMES","signal") : ("SPLIT","control"),
("SPLIT","signal") : ("VIDEO","control"),
("SPLIT","signal2") : ("FIRST","control"),
("FIRST","signal") : ("AUDIO","control"),
("AUDIO","signal") : ("","signal"),
},
boxsizes = {
("FRAMES", "inbox") : 2,
("SPLIT", "inbox") : 1,
("FIRST", "inbox") : 2,
("VIDEO", "inbox") : 2,
("AUDIO", "inbox") : 10,
}
)
sys.stderr.write("width and height must be even numbered pixel dimensions for output video\n")
sys.exit(1)
try:
os.mkdir(tmpFilePath[:-1])
except:
pass
Seq( "Decoding & separating frames...",
Graphline(
MAXF = DetermineMaxFrameNumber(edlfile),
DO = Carousel( lambda maxframe :
DecodeAndSeparateFrames(inFileName, tmpFilePath, edlfile,maxframe),
),
STOP = TriggeredOneShot(""),
linkages = {
("MAXF","outbox"):("DO","next"),
("DO","outbox"):("","outbox"),
("DO","requestNext"):("STOP","inbox"),
("STOP","signal"):("DO","control"),
("DO","signal"):("","signal"),
},
),
"Processing edits...",
Graphline(
REFRAMING = ReframeVideo(edlfile, tmpFilePath, output_width, output_height),
SOUND = PassThroughAudio(edlfile, tmpFilePath),
" -f yuv4mpegpipe -y vidpipe.yuv -f wav -y audpipe.wav",
outpipes={
"vidpipe.yuv": "video",
"audpipe.wav": "audio"
},
buffersize=131072,
),
VIDEO=Pipeline(
1,
YUV4MPEGToFrame(),
FrameRateLimitedPlayback(VideoOverlay()),
),
AUDIO=Graphline(
PARSE=WAVParser(),
OUT=Carousel(lambda format: Output(format['sample_rate'],
format['channels'],
format['sample_format'],
maximumLag=0.5)),
linkages={
("", "inbox"): ("PARSE", "inbox"),
("PARSE", "outbox"): ("OUT", "inbox"),
("PARSE", "all_meta"): ("OUT", "next"),
("", "control"): ("PARSE", "control"),
("PARSE", "signal"): ("OUT", "control"),
("OUT", "signal"): ("", "signal"),
},
boxsizes={
("PARSE", "inbox"): 5,
},
),
DEBUG=ConsoleEchoer(),
linkages={