class PiezoSpeaker(PluginBase):
qtcb_beep_finished = pyqtSignal()
qtcb_morse_finished = pyqtSignal()
def __init__(self, *args):
PluginBase.__init__(self, BrickletPiezoSpeaker, *args)
self.ps = self.device
self.qtcb_beep_finished.connect(self.cb_beep)
self.ps.register_callback(self.ps.CALLBACK_BEEP_FINISHED,
self.qtcb_beep_finished.emit)
self.qtcb_morse_finished.connect(self.cb_morse)
self.ps.register_callback(self.ps.CALLBACK_MORSE_CODE_FINISHED,
self.qtcb_morse_finished.emit)
self.has_stoppable_beep = self.firmware_version >= (2, 0, 2)
self.frequency_label = QLabel('Frequency (585 - 7100 Hz): ')
self.frequency_box = QSpinBox()
self.frequency_box.setMinimum(585)
self.frequency_box.setMaximum(7100)
self.frequency_box.setValue(1000)
self.frequency_layout = QHBoxLayout()
self.frequency_layout.addWidget(self.frequency_label)
self.frequency_layout.addWidget(self.frequency_box)
self.frequency_layout.addStretch()
self.beep_box = QSpinBox()
self.beep_box.setMinimum(0)
self.beep_box.setMaximum(2147483647)
self.beep_box.setValue(1000)
self.beep_box.setSizePolicy(QSizePolicy.Expanding, QSizePolicy.Preferred)
self.beep_label = QLabel('Duration [ms]: ')
self.beep_button = QPushButton('Send Beep')
self.beep_layout = QHBoxLayout()
self.beep_layout.addWidget(self.beep_label)
self.beep_layout.addWidget(self.beep_box)
self.beep_layout.addWidget(self.beep_button)
self.morse_edit = QLineEdit()
self.morse_edit.setText('- .. -. -.- . .-. ..-. --- .-. --. .')
self.morse_edit.setMaxLength(60)
self.morse_label = QLabel('Morse Code: ')
self.morse_button = QPushButton('Send Morse Code')
self.morse_layout = QHBoxLayout()
self.morse_layout.addWidget(self.morse_label)
self.morse_layout.addWidget(self.morse_edit)
self.morse_layout.addWidget(self.morse_button)
self.calibrate_button = QPushButton('Calibrate')
self.scale_button = QPushButton('Play Scale')
self.scale_layout = QHBoxLayout()
self.scale_layout.addWidget(self.scale_button)
self.scale_layout.addWidget(self.calibrate_button)
self.scale_layout.addStretch()
self.scale_timer = QTimer()
self.scale_timer.setInterval(25)
self.scale_time = 585
self.status_label = QLabel('Status: Idle')
self.beep_button.clicked.connect(self.beep_clicked)
self.morse_button.clicked.connect(self.morse_clicked)
self.scale_button.clicked.connect(self.scale_clicked)
self.scale_timer.timeout.connect(self.scale_timeout)
self.calibrate_button.clicked.connect(self.calibrate_clicked)
layout = QVBoxLayout(self)
layout.addLayout(self.frequency_layout)
layout.addLayout(self.beep_layout)
layout.addLayout(self.morse_layout)
layout.addLayout(self.scale_layout)
layout.addWidget(self.status_label)
layout.addStretch()
def start(self):
pass
def stop(self):
pass
def destroy(self):
pass
def get_url_part(self):
return 'piezo_speaker'
@staticmethod
def has_device_identifier(device_identifier):
return device_identifier == BrickletPiezoSpeaker.DEVICE_IDENTIFIER
def cb_beep(self):
self.beep_button.setDisabled(False)
self.morse_button.setDisabled(False)
self.scale_button.setDisabled(False)
self.status_label.setText('Status: Idle')
def cb_morse(self):
self.beep_button.setDisabled(False)
self.morse_button.setDisabled(False)
self.scale_button.setDisabled(False)
self.status_label.setText('Status: Idle')
def calibrate_clicked(self):
self.status_label.setText('Status: Calibrating...')
self.status_label.repaint()
QApplication.processEvents()
self.ps.calibrate()
self.status_label.setText('Status: New calibration stored in EEPROM')
def scale_timeout(self):
try:
self.status_label.setText(str(self.scale_time) + 'Hz')
self.ps.beep(40, self.scale_time)
except ip_connection.Error:
return
self.scale_time += 50
if self.scale_time > 7100:
self.scale_time = 585
self.scale_timer.stop()
def scale_clicked(self):
self.scale_time = 585
self.scale_timeout()
self.scale_timer.start()
self.beep_button.setDisabled(True)
self.morse_button.setDisabled(True)
self.scale_button.setDisabled(True)
def beep_clicked(self):
freq = self.frequency_box.value()
duration = self.beep_box.value()
try:
self.ps.beep(duration, freq)
except ip_connection.Error:
return
if duration > 0 or not self.has_stoppable_beep:
self.beep_button.setDisabled(True)
self.morse_button.setDisabled(True)
self.scale_button.setDisabled(True)
self.status_label.setText('Status: Beeping...')
def morse_clicked(self):
freq = self.frequency_box.value()
morse = self.morse_edit.text()
try:
self.ps.morse_code(morse, freq)
except ip_connection.Error:
return
self.beep_button.setDisabled(True)
self.morse_button.setDisabled(True)
self.scale_button.setDisabled(True)
self.status_label.setText('Status: Beeping...')
class PiezoSpeaker(PluginBase):
qtcb_beep_finished = pyqtSignal()
qtcb_morse_finished = pyqtSignal()
def __init__(self, *args):
PluginBase.__init__(self, BrickletPiezoSpeaker, *args)
self.ps = self.device
self.qtcb_beep_finished.connect(self.cb_beep)
self.ps.register_callback(self.ps.CALLBACK_BEEP_FINISHED,
self.qtcb_beep_finished.emit)
self.qtcb_morse_finished.connect(self.cb_morse)
self.ps.register_callback(self.ps.CALLBACK_MORSE_CODE_FINISHED,
self.qtcb_morse_finished.emit)
self.has_stoppable_beep = self.firmware_version >= (2, 0, 2)
self.frequency_label = QLabel('Frequency (585Hz-7100Hz): ')
self.frequency_box = QSpinBox()
self.frequency_box.setMinimum(585)
self.frequency_box.setMaximum(7100)
self.frequency_box.setValue(1000)
self.frequency_layout = QHBoxLayout()
self.frequency_layout.addWidget(self.frequency_label)
self.frequency_layout.addWidget(self.frequency_box)
self.frequency_layout.addStretch()
self.beep_box = QSpinBox()
self.beep_box.setMinimum(0)
self.beep_box.setMaximum(2147483647)
self.beep_box.setValue(1000)
self.beep_box.setSizePolicy(QSizePolicy.Expanding,
QSizePolicy.Preferred)
self.beep_label = QLabel('Duration (ms): ')
self.beep_button = QPushButton('Send Beep')
self.beep_layout = QHBoxLayout()
self.beep_layout.addWidget(self.beep_label)
self.beep_layout.addWidget(self.beep_box)
self.beep_layout.addWidget(self.beep_button)
self.morse_edit = QLineEdit()
self.morse_edit.setText('- .. -. -.- . .-. ..-. --- .-. --. .')
self.morse_edit.setMaxLength(60)
self.morse_label = QLabel('Morse Code: ')
self.morse_button = QPushButton('Send Morse Code')
self.morse_layout = QHBoxLayout()
self.morse_layout.addWidget(self.morse_label)
self.morse_layout.addWidget(self.morse_edit)
self.morse_layout.addWidget(self.morse_button)
self.calibrate_button = QPushButton('Calibrate')
self.scale_button = QPushButton('Play Scale')
self.scale_layout = QHBoxLayout()
self.scale_layout.addWidget(self.scale_button)
self.scale_layout.addWidget(self.calibrate_button)
self.scale_layout.addStretch()
self.calibrate_layout = QHBoxLayout()
self.calibrate_layout.addStretch()
self.scale_timer = QTimer()
self.scale_timer.setInterval(25)
self.scale_time = 585
self.status_label = QLabel('')
self.beep_button.clicked.connect(self.beep_clicked)
self.morse_button.clicked.connect(self.morse_clicked)
self.scale_button.clicked.connect(self.scale_clicked)
self.scale_timer.timeout.connect(self.scale_timeout)
self.calibrate_button.clicked.connect(self.calibrate_clicked)
layout = QVBoxLayout(self)
layout.addLayout(self.frequency_layout)
layout.addLayout(self.beep_layout)
layout.addLayout(self.morse_layout)
layout.addLayout(self.scale_layout)
layout.addWidget(self.status_label)
# layout.addLayout(self.calibrate_layout)
layout.addStretch()
def start(self):
pass
def stop(self):
pass
def destroy(self):
pass
def get_url_part(self):
return 'piezo_speaker'
@staticmethod
def has_device_identifier(device_identifier):
return device_identifier == BrickletPiezoSpeaker.DEVICE_IDENTIFIER
def cb_beep(self):
self.beep_button.setDisabled(False)
self.morse_button.setDisabled(False)
self.scale_button.setDisabled(False)
self.status_label.setText('')
def cb_morse(self):
self.beep_button.setDisabled(False)
self.morse_button.setDisabled(False)
self.scale_button.setDisabled(False)
self.status_label.setText('')
def calibrate_clicked(self):
self.status_label.setText('Calibrating')
self.status_label.repaint()
QApplication.processEvents()
self.ps.calibrate()
self.status_label.setText('New calibration stored in EEPROM')
def scale_timeout(self):
try:
self.status_label.setText(str(self.scale_time) + 'Hz')
self.ps.beep(40, self.scale_time)
except ip_connection.Error:
return
self.scale_time += 50
if self.scale_time > 7100:
self.scale_time = 585
self.scale_timer.stop()
def scale_clicked(self):
self.scale_time = 585
self.scale_timeout()
self.scale_timer.start()
self.beep_button.setDisabled(True)
self.morse_button.setDisabled(True)
self.scale_button.setDisabled(True)
def beep_clicked(self):
freq = self.frequency_box.value()
duration = self.beep_box.value()
try:
self.ps.beep(duration, freq)
except ip_connection.Error:
return
if duration > 0 or not self.has_stoppable_beep:
self.beep_button.setDisabled(True)
self.morse_button.setDisabled(True)
self.scale_button.setDisabled(True)
self.status_label.setText('Beeping...')
def morse_clicked(self):
freq = self.frequency_box.value()
morse = self.morse_edit.text()
try:
self.ps.morse_code(morse, freq)
except ip_connection.Error:
return
self.beep_button.setDisabled(True)
self.morse_button.setDisabled(True)
self.scale_button.setDisabled(True)
self.status_label.setText('Beeping...')
class PiezoSpeaker(PluginBase):
qtcb_beep_finished = pyqtSignal()
qtcb_morse_finished = pyqtSignal()
def __init__(self, ipcon, uid, version):
PluginBase.__init__(self, ipcon, uid, 'Piezo Speaker Bricklet', version)
self.ps = BrickletPiezoSpeaker(uid, ipcon)
self.qtcb_beep_finished.connect(self.cb_beep)
self.ps.register_callback(self.ps.CALLBACK_BEEP_FINISHED,
self.qtcb_beep_finished.emit)
self.qtcb_morse_finished.connect(self.cb_morse)
self.ps.register_callback(self.ps.CALLBACK_MORSE_CODE_FINISHED,
self.qtcb_morse_finished.emit)
self.frequency_label = QLabel('Frequency (585Hz-7100Hz): ')
self.frequency_box = QSpinBox()
self.frequency_box.setMinimum(585)
self.frequency_box.setMaximum(7100)
self.frequency_box.setValue(1000)
self.frequency_layout = QHBoxLayout()
self.frequency_layout.addWidget(self.frequency_label)
self.frequency_layout.addWidget(self.frequency_box)
self.frequency_layout.addStretch()
self.beep_edit = QLineEdit()
self.beep_edit.setText(str(1000))
self.beep_label = QLabel('Duration (ms): ')
self.beep_button = QPushButton('Send Beep')
self.beep_layout = QHBoxLayout()
self.beep_layout.addWidget(self.beep_label)
self.beep_layout.addWidget(self.beep_edit)
self.beep_layout.addWidget(self.beep_button)
self.morse_edit = QLineEdit()
self.morse_edit.setText('- .. -. -.- . .-. ..-. --- .-. --. .')
self.morse_edit.setMaxLength(60)
self.morse_label = QLabel('Morse Code: ')
self.morse_button = QPushButton('Send Morse Code')
self.morse_layout = QHBoxLayout()
self.morse_layout.addWidget(self.morse_label)
self.morse_layout.addWidget(self.morse_edit)
self.morse_layout.addWidget(self.morse_button)
self.calibrate_button = QPushButton('Calibrate')
self.scale_button = QPushButton('Play Scale')
self.scale_layout = QHBoxLayout()
self.scale_layout.addWidget(self.scale_button)
self.scale_layout.addWidget(self.calibrate_button)
self.scale_layout.addStretch()
self.calibrate_layout = QHBoxLayout()
self.calibrate_layout.addStretch()
self.scale_timer = QTimer()
self.scale_timer.setInterval(25)
self.scale_time = 585
self.status_label = QLabel('')
self.beep_button.pressed.connect(self.beep_pressed)
self.morse_button.pressed.connect(self.morse_pressed)
self.scale_button.pressed.connect(self.scale_pressed)
self.scale_timer.timeout.connect(self.scale_timeout)
self.calibrate_button.pressed.connect(self.calibrate_pressed)
layout = QVBoxLayout(self)
layout.addLayout(self.frequency_layout)
layout.addLayout(self.beep_layout)
layout.addLayout(self.morse_layout)
layout.addLayout(self.scale_layout)
layout.addWidget(self.status_label)
# layout.addLayout(self.calibrate_layout)
layout.addStretch()
def start(self):
pass
def stop(self):
pass
def get_url_part(self):
return 'piezo_speaker'
@staticmethod
def has_device_identifier(device_identifier):
return device_identifier == BrickletPiezoSpeaker.DEVICE_IDENTIFIER
def cb_beep(self):
self.beep_button.setDisabled(False)
self.morse_button.setDisabled(False)
self.scale_button.setDisabled(False)
self.status_label.setText('')
def cb_morse(self):
self.beep_button.setDisabled(False)
self.morse_button.setDisabled(False)
self.scale_button.setDisabled(False)
self.status_label.setText('')
def calibrate_pressed(self):
self.status_label.setText('Calibrating')
self.status_label.repaint()
QApplication.processEvents()
self.ps.calibrate()
self.status_label.setText('New calibration stored in EEPROM')
def scale_timeout(self):
try:
self.status_label.setText(str(self.scale_time) + 'Hz')
self.ps.beep(40, self.scale_time)
except ip_connection.Error:
return
self.scale_time += 50
if self.scale_time > 7100:
self.scale_time = 585
self.scale_timer.stop()
def scale_pressed(self):
self.scale_time = 585
self.scale_timeout()
self.scale_timer.start()
self.beep_button.setDisabled(True)
self.morse_button.setDisabled(True)
self.scale_button.setDisabled(True)
def beep_pressed(self):
freq = self.frequency_box.value()
duration = int(self.beep_edit.text())
try:
self.ps.beep(duration, freq)
except ip_connection.Error:
return
self.beep_button.setDisabled(True)
self.morse_button.setDisabled(True)
self.scale_button.setDisabled(True)
self.status_label.setText('Beeping...')
def morse_pressed(self):
freq = self.frequency_box.value()
morse = str(self.morse_edit.text())
try:
self.ps.morse_code(morse, freq)
except ip_connection.Error:
return
self.beep_button.setDisabled(True)
self.morse_button.setDisabled(True)
self.scale_button.setDisabled(True)
self.status_label.setText('Beeping...')
class LDSControls(QFrame):
STATIC_IMG = ('error_static.png','linz_static.png','busy_static.png','clean_static.png')
ANIM_IMG = ('error.gif','linz.gif','layer.gif','clean.gif')
IMG_SPEED = 100
IMG_WIDTH = 64
IMG_HEIGHT = 64
MAX_WD = 450
GD_PATH = os.path.abspath(os.path.join(os.path.dirname(__file__), '../../../../bin/gdal/gdal-data'))
STATUS = LU.enum('ERROR','IDLE','BUSY','CLEAN')
def __init__(self,parent):
super(LDSControls, self).__init__()
self.parent = parent
self.initConf()
self.initEPSG()
self.initUI()
def initConf(self):
'''Read files in conf dir ending in conf'''
self.cflist = ConfigInitialiser.getConfFiles()
#self.imgset = self.STATIC_IMG if ConfigWrapper().readDSProperty('Misc','indicator')=='static' else self.ANIM_IMG
#self.imgset = self.STATIC_IMG if self.parent.confconn.tp.src.confwrap.readDSProperty('Misc','indicator')=='static' else self.ANIM_IMG
sep = self.parent.confconn.reg.openEndPoint(self.parent.confconn.SRCNAME,self.parent.confconn.uconf)
self.imgset = self.STATIC_IMG if sep.confwrap.readDSProperty('Misc','indicator')=='static' else self.ANIM_IMG
self.parent.confconn.reg.closeEndPoint(self.parent.confconn.SRCNAME)
def initEPSG(self):
'''Read GDAL EPSG files, splitting by NZ(RSR) and RestOfTheWorld'''
gcsf = gdal.FindFile('gdal','gcs.csv')
if not gcsf:
gcsf = os.path.join(self.GD_PATH,'gcs.csv')
pcsf = gdal.FindFile('gdal','pcs.csv')
if not pcsf:
pcsf = os.path.join(self.GD_PATH,'pcs.csv')
gcs = ConfigInitialiser.readCSV(gcsf)
pcs = ConfigInitialiser.readCSV(pcsf)
self.nzlsr = [(e[0],e[0]+' - '+e[3]) for e in gcs if 'NZGD' in e[1] or 'RSRGD' in e[1]] \
+ [(e[0],e[0]+' - '+e[1]) for e in pcs if 'NZGD' in e[1] or 'RSRGD' in e[1]]
self.rowsr = [(e[0],e[0]+' - '+e[3]) for e in gcs if 'NZGD' not in e[1] and 'RSRGD' not in e[1]] \
+ [(e[0],e[0]+' - '+e[1]) for e in pcs if 'NZGD' not in e[1] and 'RSRGD' not in e[1]]
def initUI(self):
# 0 1 2 3 4 5 6 7 8
#'destname','lgselect','layer','uconf','group','epsg','fd','td','int'
#self.rdest,rlgselect,self.rlayer,ruconf,self.rgroup,repsg,rfd,rtd,rint = readlist
QToolTip.setFont(QFont('SansSerif', 10))
#labels
destLabel = QLabel('Destination')
lgLabel = QLabel('Group/Layer')
epsgLabel = QLabel('EPSG')
fromDateLabel = QLabel('From Date')
toDateLabel = QLabel('To Date')
confLabel = QLabel('User Config')
self.view = QLabel()
self.view.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
self.view.setAlignment(Qt.AlignCenter)
self.confcombo = QComboBox(self)
self.confcombo.setToolTip('Enter your user config name (file) here')
self.confcombo.addItems(self.cflist)
self.confcombo.setEditable(False)
#self.confcombo.currentIndexChanged.connect(self.doLGEditUpdate)
#combos
self.lgcombo = QComboBox(self)
self.lgcombo.setMaximumWidth(self.MAX_WD)
self.lgcombo.setDuplicatesEnabled(False)
#self.lgcombo.setInsertPolicy(QComboBox.InsertAlphabetically)#?doesnt seem to work
self.lgcombo.setToolTip('Select either Layer or Group entry')
self.lgcombo.setEditable(False)
self.sepindex = None
#self.updateLGValues()
self.epsgcombo = QComboBox(self)
self.epsgcombo.setMaximumWidth(self.MAX_WD)
self.epsgcombo.setToolTip('Setting an EPSG number here determines the output SR of the layer')
self.epsgcombo.addItems([i[1] for i in self.nzlsr])
self.epsgcombo.insertSeparator(len(self.nzlsr))
self.epsgcombo.addItems([i[1] for i in self.rowsr])
self.epsgcombo.setEditable(True)
self.epsgcombo.setEnabled(False)
self.destlist = self.getConfiguredDestinations()
self.destcombo = QComboBox(self)
self.destcombo.setToolTip('Choose the desired output type')
self.destcombo.setEditable(False)
self.destcombo.addItems(self.destlist)
#date selection
self.fromdateedit = QDateEdit()
self.fromdateedit.setCalendarPopup(True)
self.fromdateedit.setEnabled(False)
self.todateedit = QDateEdit()
self.todateedit.setCalendarPopup(True)
self.todateedit.setEnabled(False)
#check boxes
self.epsgenable = QCheckBox()
self.epsgenable.setCheckState(False)
self.epsgenable.clicked.connect(self.doEPSGEnable)
self.fromdateenable = QCheckBox()
self.fromdateenable.setCheckState(False)
self.fromdateenable.clicked.connect(self.doFromDateEnable)
self.todateenable = QCheckBox()
self.todateenable.setCheckState(False)
self.todateenable.clicked.connect(self.doToDateEnable)
self.progressbar = QProgressBar()
self.progressbar.setRange(0,100)
self.progressbar.setVisible(True)
self.progressbar.setMinimumWidth(self.MAX_WD)
#buttons
self.initbutton = QPushButton("waiting")
self.initbutton.setToolTip('Initialise the Layer Configuration')
self.initbutton.clicked.connect(self.doInitClickAction)
self.cleanbutton = QPushButton("Clean")
self.cleanbutton.setToolTip('Clean the selected layer/group from local storage')
self.cleanbutton.clicked.connect(self.doCleanClickAction)
self.replicatebutton = QPushButton("Replicate")
self.replicatebutton.setToolTip('Execute selected replication')
self.replicatebutton.clicked.connect(self.doReplicateClickAction)
self.cancelbutton = QPushButton("Close")
self.cancelbutton.setToolTip('Close the LDS Replicate application')
self.cancelbutton.clicked.connect(self.parent.close)
#set dialog values using GPR
self.updateGUIValues(self.parent.gvs)
#set onchange here otherwise we get circular initialisation
self.destcombo.currentIndexChanged.connect(self.doDestChanged)
self.confcombo.currentIndexChanged.connect(self.doConfChanged)
self.lgcombo.currentIndexChanged.connect(self.doLGComboChanged)
self.setStatus(self.STATUS.IDLE)
#grid
grid = QGridLayout()
grid.setSpacing(10)
#placement section ------------------------------------
#---------+---------+--------+---------+--------
# dest LB | | dest DD
# grp LB | | grp DD
# conf LB | | conf DD
# epsg L | epsg CB | epsg DD
# f dt L | f dt CB | f dt DD
# t td L | t td CB | t td DD
# icon | <- progress ->
# layer B | <- . -> |repl B | clean B | close B
#---------+---------+--------+---------+--------
grid.addWidget(destLabel, 1, 0)
grid.addWidget(self.destcombo, 1, 2)
#grid.addWidget(layerLabel, 2, 0)
grid.addWidget(lgLabel, 2, 0)
grid.addWidget(self.lgcombo, 2, 2)
grid.addWidget(confLabel, 3, 0)
grid.addWidget(self.confcombo, 3, 2)
#grid.addWidget(groupLabel, 4, 0)
#grid.addWidget(self.groupEdit, 4, 2)
grid.addWidget(epsgLabel, 5, 0)
grid.addWidget(self.epsgenable, 5, 1)
grid.addWidget(self.epsgcombo, 5, 2)
grid.addWidget(fromDateLabel, 6, 0)
grid.addWidget(self.fromdateenable, 6, 1)
grid.addWidget(self.fromdateedit, 6, 2)
grid.addWidget(toDateLabel, 7, 0)
grid.addWidget(self.todateenable, 7, 1)
grid.addWidget(self.todateedit, 7, 2)
hbox3 = QHBoxLayout()
hbox3.addWidget(self.view)
hbox3.addStretch(1)
hbox3.addWidget(self.progressbar)
#hbox3.addLayout(vbox2)
#hbox3.addLayout(vbox3)
hbox4 = QHBoxLayout()
hbox4.addWidget(self.initbutton)
hbox4.addStretch(1)
hbox4.addWidget(self.replicatebutton)
hbox4.addWidget(self.cleanbutton)
hbox4.addWidget(self.cancelbutton)
vbox = QVBoxLayout()
#vbox.addStretch(1)
vbox.addLayout(grid)
vbox.addLayout(hbox3)
vbox.addLayout(hbox4)
self.setLayout(vbox)
#def setProgress(self,pct):
# self.progressbar.setValue(pct)
def setStatus(self,status,message='',tooltip=None):
'''Sets indicator icon and statusbar message'''
self.parent.statusbar.showMessage(message)
self.parent.statusbar.setToolTip(tooltip if tooltip else '')
#progress
loc = os.path.abspath(os.path.join(IMG_LOC,self.imgset[status]))
#loc = os.path.abspath(os.path.join(os.path.dirname(__file__),self.parent.IMG_LOC,self.imgset[status]))
self.progressbar.setVisible(status in (self.STATUS.BUSY, self.STATUS.CLEAN))
#icon
anim = QMovie(loc, QByteArray(), self)
anim.setScaledSize(QSize(self.IMG_WIDTH,self.IMG_HEIGHT))
anim.setCacheMode(QMovie.CacheAll)
anim.setSpeed(self.IMG_SPEED)
self.view.clear()
self.view.setMovie(anim)
anim.start()
self.view.repaint()
QApplication.processEvents(QEventLoop.AllEvents)
def mainWindowEnable(self,enable=True):
cons = (self.lgcombo, self.confcombo, self.destcombo,
self.initbutton, self.replicatebutton, self.cleanbutton, self.cancelbutton,
self.epsgenable,self.fromdateenable,self.todateenable,
self.parent.menubar)
for c in cons:
c.setEnabled(enable)
if enable:
self.epsgcombo.setEnabled(self.epsgenable.checkState())
self.fromdateedit.setEnabled(self.fromdateenable.checkState())
self.todateedit.setEnabled(self.todateenable.checkState())
else:
self.epsgcombo.setEnabled(False)
self.fromdateedit.setEnabled(False)
self.todateedit.setEnabled(False)
QApplication.restoreOverrideCursor() if enable else QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
def refreshLGCombo(self):
'''Re index LG combobox since a refreshLG call (new dest?) will usually mean new groups'''
self.lgcombo.clear()
self.lgcombo.addItems([i[2] for i in self.parent.confconn.lglist])
#NOTE the separator consumes an index, if not clearing the combobox selectively remove the old sepindex (assumes g preceeds l)
#if self.sepindex:
# self.lgcombo.removeItem(self.sepindex)
self.sepindex = [i[0] for i in self.parent.confconn.lglist].count(LORG.GROUP)
self.lgcombo.insertSeparator(self.sepindex)
def updateLGValues(self,uconf,lgval,dest):
'''Sets the values displayed in the Layer/Group combo'''
#because we cant seem to sort combobox entries and want groups at the top, clear and re-add
#TRACE#
#pdb.set_trace()
sf = None
try:
self.parent.confconn.initConnections(uconf,lgval,dest)
except Exception as e:
sf=1
ldslog.error('Error Updating UC Values. '+str(e))
if sf:
self.setStatus(self.STATUS.ERROR,'Error Updating UC Values', str(e))
else:
self.setStatus(self.STATUS.IDLE)
self.refreshLGCombo()
def centre(self):
qr = self.frameGeometry()
cp = QDesktopWidget().availableGeometry().center()
qr.moveCenter(cp)
self.move(qr.topLeft())
def gprParameters(self,rdest):
'''Zip default and GPR values'''
return [x if LU.assessNone(x) else y for x,y in zip(self.parent.gpr.readsec(rdest),self.parent.DEF_RVALS[1:])]
def getLCE(self,ln):
'''Read layer parameters'''
dep = self.parent.confconn.reg.openEndPoint(self.parent.confconn.destname,self.parent.confconn.uconf)
#sep = self.parent.confconn.reg.openEndPoint('WFS',self.parent.confconn.uconf)
self.parent.confconn.reg.setupLayerConfig(self.parent.confconn.tp,None,dep,initlc=False)
lce = dep.getLayerConf().readLayerParameters(ln)
#self.parent.confconn.reg.closeEndPoint('WFS')
self.parent.confconn.reg.closeEndPoint(self.parent.confconn.destname)
sep,dep = None,None
return lce
def doDestChanged(self):
'''Read the destname parameter and fill dialog with matching GPR values'''
rdest = str(self.destlist[self.destcombo.currentIndex()])
rvals = self.gprParameters(rdest)
self.updateGUIValues([rdest]+rvals)
def doConfChanged(self):
'''Read the user conf parameter and fill dialog with matching GPR values'''
rdest = str(self.destlist[self.destcombo.currentIndex()])
rlg,_,rep,rfd,rtd = self.gprParameters(rdest)
ruc = str(self.cflist[self.confcombo.currentIndex()])
self.updateGUIValues((rdest,rlg,ruc,rep,rfd,rtd))
def doLGComboChanged(self):
'''Read the layer/group value and change epsg to layer or gpr match'''
#get a matching LG entry and test whether its a layer or group
#lgi = self.parent.confconn.getLayerGroupIndex(self.lgcombo.currentText().toUtf8().data())
lgi = self.parent.confconn.getLayerGroupIndex(LQ.readWidgetText(self.lgcombo.currentText()))
#lgi can be none if we init a new group, in which case we use the GPR value
if lgi:
lge = self.parent.confconn.lglist[lgi]
lce = self.getLCE(lge[1]) if lge[0]==LORG.LAYER else None
else:
lce = None
#look for filled layer conf epsg OR use prefs stored in gpr
if lce and LU.assessNone(lce.epsg):
epsgval = lce.epsg
else:
rdest = str(self.destlist[self.destcombo.currentIndex()])
_,_,epsgval,_,_ = self.gprParameters(rdest)
epsgindex = [i[0] for i in self.nzlsr+[(0,0)]+self.rowsr].index(epsgval)
if self.epsgcombo.currentIndex() != epsgindex:
self.epsgcombo.setCurrentIndex(int(epsgindex))
def updateGUIValues(self,readlist):
'''Fill dialog values from provided list'''
#TODO. Remove circular references when setCurrentIndex() triggers do###Changed()
#Read user input
rdest,self.rlgval,ruconf,repsg,rfd,rtd = readlist
#--------------------------------------------------------------------
#Destination Menu
selecteddest = LU.standardiseDriverNames(rdest)
if selecteddest not in self.destlist:
self.destlist = self.getConfiguredDestinations()
self.destcombo.addItem(selecteddest)
destindex = self.destlist.index(selecteddest) if selecteddest else 0
if self.destcombo.currentIndex() != destindex:
self.destcombo.setCurrentIndex(destindex)
#InitButton
self.initbutton.setText('Layer Select')
#Config File
confindex = 0
if LU.assessNone(ruconf):
ruconf = ruconf.split('.')[0]
if ruconf not in self.cflist:
self.cflist += [ruconf,]
self.confcombo.addItem(ruconf)
confindex = self.cflist.index(ruconf)
if self.confcombo.currentIndex() != confindex:
self.confcombo.setCurrentIndex(confindex)
#self.confEdit.setText(ruconf if LU.assessNone(ruconf) else '')
#Layer/Group Selection
self.updateLGValues(ruconf,self.rlgval,rdest)
lgindex = None
if LU.assessNone(self.rlgval):
#index of list value
lgindex = self.parent.confconn.getLayerGroupIndex(self.rlgval,col=1)
if LU.assessNone(lgindex):
#advance by 1 for sep
lgindex += 1 if lgindex>self.sepindex else 0
else:
#using the separator index sets the combo to blank
lgindex = self.sepindex
if self.lgcombo.currentIndex() != lgindex:
self.lgcombo.setCurrentIndex(lgindex)
#self.doLGEditUpdate()
#EPSG
# user > layerconf
#useepsg = LU.precedence(repsg, lce.epsg if lce else None, None)
epsgindex = [i[0] for i in self.nzlsr+[(None,None)]+self.rowsr].index(repsg)
if self.epsgcombo.currentIndex() != epsgindex:
self.epsgcombo.setCurrentIndex(epsgindex)
#epsgedit = self.epsgcombo.lineEdit()
#epsgedit.setText([e[1] for e in self.nzlsr+self.rowsr if e[0]==repsg][0])
#epsgedit.setText([e for e in self.nzlsr+self.rowsr if re.match('^\s*(\d+).*',e).group(1)==repsg][0])
#To/From Dates
if LU.assessNone(rfd):
self.fromdateedit.setDate(QDate(int(rfd[0:4]),int(rfd[5:7]),int(rfd[8:10])))
else:
early = DataStore.EARLIEST_INIT_DATE
self.fromdateedit.setDate(QDate(int(early[0:4]),int(early[5:7]),int(early[8:10])))
if LU.assessNone(rtd):
self.todateedit.setDate(QDate(int(rtd[0:4]),int(rtd[5:7]),int(rtd[8:10])))
else:
today = DataStore.getCurrent()
self.todateedit.setDate(QDate(int(today[0:4]),int(today[5:7]),int(today[8:10])))
#Internal/External CheckBox
# if LU.assessNone(rint):
# self.internalTrigger.setChecked(rint.lower()==DataStore.CONF_INT)
# else:
# self.internalTrigger.setChecked(DataStore.DEFAULT_CONF==DataStore.CONF_INT)
def getConfiguredDestinations(self):
defml = ['',]+DataStore.DRIVER_NAMES.values()
return [d for d in self.parent.gpr.getDestinations() if d in defml]
def doEPSGEnable(self):
self.epsgcombo.setEnabled(self.epsgenable.isChecked())
def doFromDateEnable(self):
self.fromdateedit.setEnabled(self.fromdateenable.isChecked())
def doToDateEnable(self):
self.todateedit.setEnabled(self.todateenable.isChecked())
def readParameters(self):
'''Read values out of dialogs'''
destination = LU.assessNone(str(self.destlist[self.destcombo.currentIndex()]))
#lgindex = self.parent.confconn.getLayerGroupIndex(self.lgcombo.currentText().toUtf8().data())
lgindex = self.parent.confconn.getLayerGroupIndex(LQ.readWidgetText(self.lgcombo.currentText()))
#NB need to test for None explicitly since zero is a valid index
lgval = self.parent.confconn.lglist[lgindex][1] if LU.assessNone(lgindex) else None
#uconf = LU.standardiseUserConfigName(str(self.confcombo.lineEdit().text()))
#uconf = str(self.confcombo.lineEdit().text())
uconf = str(self.cflist[self.confcombo.currentIndex()])
ee = self.epsgenable.isChecked()
epsg = None if ee is False else re.match('^\s*(\d+).*',str(self.epsgcombo.lineEdit().text())).group(1)
fe = self.fromdateenable.isChecked()
te = self.todateenable.isChecked()
fd = None if fe is False else str(self.fromdateedit.date().toString('yyyy-MM-dd'))
td = None if te is False else str(self.todateedit.date().toString('yyyy-MM-dd'))
return destination,lgval,uconf,epsg,fe,te,fd,td
def doInitClickAction(self):
'''Initialise the LC on LC-button-click, action'''
try:
try:
self.setStatus(self.STATUS.BUSY,'Opening Layer-Config Editor')
self.progressbar.setValue(0)
self.parent.runLayerConfigAction()
finally:
self.setStatus(self.STATUS.IDLE,'Ready')
except Exception as e:
self.setStatus(self.STATUS.ERROR,'Error in Layer-Config',str(sys.exc_info()))#e))
def doCleanClickAction(self):
'''Set clean anim and run clean'''
#lgo = self.lgcombo.currentText().toUtf8().data()
lgo = LQ.readWidgetText(self.lgcombo.currentText())
try:
self.setStatus(self.STATUS.CLEAN,'Running Clean '+lgo)
self.progressbar.setValue(0)
self.runReplicationScript(True)
except Exception as e:
self.setStatus(self.STATUS.ERROR,'Failed Clean of '+lgo,str(sys.exc_info()))#e))
def doReplicateClickAction(self):
'''Set busy anim and run repl'''
lgo = self.lgcombo.currentText()#.toUtf8().data()#only used for error messages
try:
self.setStatus(self.STATUS.BUSY,'Running Replicate '+lgo)
self.progressbar.setValue(0)
self.runReplicationScript(False)
except Exception as e:
self.setStatus(self.STATUS.ERROR,'Failed Replication of '+lgo,str(sys.exc_info()))#e))
def runReplicationScript(self,clean=False):
'''Run the layer/group repliction script'''
destination,lgval,uconf,epsg,fe,te,fd,td = self.readParameters()
uconf_path = LU.standardiseUserConfigName(uconf)
destination_path = LU.standardiseLayerConfigName(destination)
destination_driver = LU.standardiseDriverNames(destination)
if not os.path.exists(uconf_path):
self.userConfMessage(uconf_path)
return
elif not MainFileReader(uconf_path).hasSection(destination_driver):
self.userConfMessage(uconf_path,destination_driver)
return
#-----------------------------------------------------
#'destname','layer','uconf','group','epsg','fd','td','int'
self.parent.gpr.write((destination_driver,lgval,uconf,epsg,fd,td))
ldslog.info(u'dest={0}, lg={1}, conf={2}, epsg={3}'.format(destination_driver,lgval,uconf,epsg))
ldslog.info('fd={0}, td={1}, fe={2}, te={3}'.format(fd,td,fe,te))
lgindex = self.parent.confconn.getLayerGroupIndex(lgval,col=1)
#lorg = self.parent.confconn.lglist[lgindex][0]
#----------don't need lorg in TP anymore but it is useful for sorting/counting groups
#self.parent.confconn.tp.setLayerOrGroup(lorg)
self.parent.confconn.tp.setLayerGroupValue(lgval)
if self.fromdateenable.isChecked(): self.parent.confconn.tp.setFromDate(fd)
if self.todateenable.isChecked(): self.parent.confconn.tp.setToDate(td)
self.parent.confconn.tp.setUserConf(uconf)
if self.epsgenable: self.parent.confconn.tp.setEPSG(epsg)
#because clean state persists in TP
if clean:
self.parent.confconn.tp.setCleanConfig()
else:
self.parent.confconn.tp.clearCleanConfig()
#(re)initialise the data source since uconf may have changed
#>>#self.parent.confconn.tp.src = self.parent.confconn.initSourceWrapper()
#--------------------------
###ep = self.parent.confconn.reg.openEndPoint(self.parent.confconn.destname,self.parent.confconn.uconf)
###self.parent.confconn.reg.closeEndPoint(self.parent.confconn.destname)
###ep = None
#Open ProcessRunner and run with TP(proc)/self(gui) instances
#HACK temp add of dest_drv to PR call
try:
#TODO. Test for valid LC first
self.tpr = ProcessRunner(self,destination_driver)
except Exception as e:
ldslog.error('Cannot create ProcessRunner {}. NB Possible missing Layer Config {}'.format(str(e),destination_path))
self.layerConfMessage(destination_path)
return
#If PR has been successfully created we must vave a valid dst
self.tpr.start()
def quitProcessRunner(self):
self.tpr.join()
self.tpr.quit()
self.trp = None
def userConfMessage(self,uconf,secname=None):
ucans = QMessageBox.warning(self, 'User Config Missing/Incomplete',
'Specified User-Config file, '+str(uconf)+' does not exist' if secname is None else 'User-Config file does not contain '+str(secname)+' section',
'Back','Initialise User Config')
if not ucans:
#Retry
ldslog.warn('Retry specifying UC')
#self.confcombo.setCurrentIndex(0)
return
#Init
ldslog.warn('Reset User Config Wizard')
self.parent.runWizardAction()
def layerConfMessage(self,dest):
lcans = QMessageBox.warning(self, 'Layer Config Missing',
'Required Layer-Config file, '+str(dest)+' does not exist',
'Back','Run Layer Select')
if not lcans:
#Retry
ldslog.warn('Retry specifying LC')
#self.destcombo.setCurrentIndex(0)
return
#Init
ldslog.warn('Reset Layer Config')
self.doInitClickAction()
class LDSControls(QFrame):
STATIC_IMG = ('error_static.png','linz_static.png','busy_static.png','clean_static.png')
ANIM_IMG = ('error.gif','linz.gif','layer.gif','clean.gif')
IMG_SPEED = 100
IMG_WIDTH = 64
IMG_HEIGHT = 64
MAX_WD = 450
GD_PATH = os.path.abspath(os.path.join(os.path.dirname(__file__), '../../../../bin/gdal/gdal-data'))
STATUS = LU.enum('ERROR','IDLE','BUSY','CLEAN')
def __init__(self,parent):
super(LDSControls, self).__init__()
self.parent = parent
self.initConf()
self.initEPSG()
self.initUI()
def initConf(self):
'''Read files in conf dir ending in conf'''
self.cflist = ConfigInitialiser.getConfFiles()
#self.imgset = self.STATIC_IMG if ConfigWrapper().readDSProperty('Misc','indicator')=='static' else self.ANIM_IMG
#self.imgset = self.STATIC_IMG if self.parent.confconn.tp.src.confwrap.readDSProperty('Misc','indicator')=='static' else self.ANIM_IMG
sep = self.parent.confconn.reg.openEndPoint(self.parent.confconn.SRCNAME,self.parent.confconn.uconf)
self.imgset = self.STATIC_IMG if sep.confwrap.readDSProperty('Misc','indicator')=='static' else self.ANIM_IMG
self.parent.confconn.reg.closeEndPoint(self.parent.confconn.SRCNAME)
def initEPSG(self):
'''Read GDAL EPSG files, splitting by NZ(RSR) and RestOfTheWorld'''
gcsf = gdal.FindFile('gdal','gcs.csv')
if not gcsf:
gcsf = os.path.join(self.GD_PATH,'gcs.csv')
pcsf = gdal.FindFile('gdal','pcs.csv')
if not pcsf:
pcsf = os.path.join(self.GD_PATH,'pcs.csv')
gcs = ConfigInitialiser.readCSV(gcsf)
pcs = ConfigInitialiser.readCSV(pcsf)
self.nzlsr = [(e[0],e[0]+' - '+e[3]) for e in gcs if 'NZGD' in e[1] or 'RSRGD' in e[1]] \
+ [(e[0],e[0]+' - '+e[1]) for e in pcs if 'NZGD' in e[1] or 'RSRGD' in e[1]]
self.rowsr = [(e[0],e[0]+' - '+e[3]) for e in gcs if 'NZGD' not in e[1] and 'RSRGD' not in e[1]] \
+ [(e[0],e[0]+' - '+e[1]) for e in pcs if 'NZGD' not in e[1] and 'RSRGD' not in e[1]]
def initUI(self):
# 0 1 2 3 4 5 6 7 8
#'destname','lgselect','layer','uconf','group','epsg','fd','td','int'
#self.rdest,rlgselect,self.rlayer,ruconf,self.rgroup,repsg,rfd,rtd,rint = readlist
QToolTip.setFont(QFont('SansSerif', 10))
#labels
destLabel = QLabel('Destination')
lgLabel = QLabel('Group/Layer')
epsgLabel = QLabel('EPSG')
fromDateLabel = QLabel('From Date')
toDateLabel = QLabel('To Date')
confLabel = QLabel('User Config')
self.view = QLabel()
self.view.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
self.view.setAlignment(Qt.AlignCenter)
self.confcombo = QComboBox(self)
self.confcombo.setToolTip('Enter your user config name (file) here')
self.confcombo.addItems(self.cflist)
self.confcombo.setEditable(False)
#self.confcombo.currentIndexChanged.connect(self.doLGEditUpdate)
#combos
self.lgcombo = QComboBox(self)
self.lgcombo.setMaximumWidth(self.MAX_WD)
self.lgcombo.setDuplicatesEnabled(False)
#self.lgcombo.setInsertPolicy(QComboBox.InsertAlphabetically)#?doesnt seem to work
self.lgcombo.setToolTip('Select either Layer or Group entry')
self.lgcombo.setEditable(False)
self.sepindex = None
#self.updateLGValues()
self.epsgcombo = QComboBox(self)
self.epsgcombo.setMaximumWidth(self.MAX_WD)
self.epsgcombo.setToolTip('Setting an EPSG number here determines the output SR of the layer')
self.epsgcombo.addItems([i[1] for i in self.nzlsr])
self.epsgcombo.insertSeparator(len(self.nzlsr))
self.epsgcombo.addItems([i[1] for i in self.rowsr])
self.epsgcombo.setEditable(True)
self.epsgcombo.setEnabled(False)
self.destlist = self.getConfiguredDestinations()
self.destcombo = QComboBox(self)
self.destcombo.setToolTip('Choose the desired output type')
self.destcombo.setEditable(False)
self.destcombo.addItems(self.destlist)
#date selection
self.fromdateedit = QDateEdit()
self.fromdateedit.setCalendarPopup(True)
self.fromdateedit.setEnabled(False)
self.todateedit = QDateEdit()
self.todateedit.setCalendarPopup(True)
self.todateedit.setEnabled(False)
#check boxes
self.epsgenable = QCheckBox()
self.epsgenable.setCheckState(False)
self.epsgenable.clicked.connect(self.doEPSGEnable)
self.fromdateenable = QCheckBox()
self.fromdateenable.setCheckState(False)
self.fromdateenable.clicked.connect(self.doFromDateEnable)
self.todateenable = QCheckBox()
self.todateenable.setCheckState(False)
self.todateenable.clicked.connect(self.doToDateEnable)
self.progressbar = QProgressBar()
self.progressbar.setRange(0,100)
self.progressbar.setVisible(True)
self.progressbar.setMinimumWidth(self.MAX_WD)
#buttons
self.initbutton = QPushButton("waiting")
self.initbutton.setToolTip('Initialise the Layer Configuration')
self.initbutton.clicked.connect(self.doInitClickAction)
self.cleanbutton = QPushButton("Clean")
self.cleanbutton.setToolTip('Clean the selected layer/group from local storage')
self.cleanbutton.clicked.connect(self.doCleanClickAction)
self.replicatebutton = QPushButton("Replicate")
self.replicatebutton.setToolTip('Execute selected replication')
self.replicatebutton.clicked.connect(self.doReplicateClickAction)
self.cancelbutton = QPushButton("Close")
self.cancelbutton.setToolTip('Close the LDS Replicate application')
self.cancelbutton.clicked.connect(self.parent.close)
#set dialog values using GPR
self.updateGUIValues(self.parent.gvs)
#set onchange here otherwise we get circular initialisation
self.destcombo.currentIndexChanged.connect(self.doDestChanged)
self.confcombo.currentIndexChanged.connect(self.doConfChanged)
self.lgcombo.currentIndexChanged.connect(self.doLGComboChanged)
self.setStatus(self.STATUS.IDLE)
#grid
grid = QGridLayout()
grid.setSpacing(10)
#placement section ------------------------------------
#---------+---------+--------+---------+--------
# dest LB | | dest DD
# grp LB | | grp DD
# conf LB | | conf DD
# epsg L | epsg CB | epsg DD
# f dt L | f dt CB | f dt DD
# t td L | t td CB | t td DD
# icon | <- progress ->
# layer B | <- . -> |repl B | clean B | close B
#---------+---------+--------+---------+--------
grid.addWidget(destLabel, 1, 0)
grid.addWidget(self.destcombo, 1, 2)
#grid.addWidget(layerLabel, 2, 0)
grid.addWidget(lgLabel, 2, 0)
grid.addWidget(self.lgcombo, 2, 2)
grid.addWidget(confLabel, 3, 0)
grid.addWidget(self.confcombo, 3, 2)
#grid.addWidget(groupLabel, 4, 0)
#grid.addWidget(self.groupEdit, 4, 2)
grid.addWidget(epsgLabel, 5, 0)
grid.addWidget(self.epsgenable, 5, 1)
grid.addWidget(self.epsgcombo, 5, 2)
grid.addWidget(fromDateLabel, 6, 0)
grid.addWidget(self.fromdateenable, 6, 1)
grid.addWidget(self.fromdateedit, 6, 2)
grid.addWidget(toDateLabel, 7, 0)
grid.addWidget(self.todateenable, 7, 1)
grid.addWidget(self.todateedit, 7, 2)
hbox3 = QHBoxLayout()
hbox3.addWidget(self.view)
hbox3.addStretch(1)
hbox3.addWidget(self.progressbar)
#hbox3.addLayout(vbox2)
#hbox3.addLayout(vbox3)
hbox4 = QHBoxLayout()
hbox4.addWidget(self.initbutton)
hbox4.addStretch(1)
hbox4.addWidget(self.replicatebutton)
hbox4.addWidget(self.cleanbutton)
hbox4.addWidget(self.cancelbutton)
vbox = QVBoxLayout()
#vbox.addStretch(1)
vbox.addLayout(grid)
vbox.addLayout(hbox3)
vbox.addLayout(hbox4)
self.setLayout(vbox)
#def setProgress(self,pct):
# self.progressbar.setValue(pct)
def setStatus(self,status,message='',tooltip=None):
'''Sets indicator icon and statusbar message'''
self.parent.statusbar.showMessage(message)
self.parent.statusbar.setToolTip(tooltip if tooltip else '')
#progress
loc = os.path.abspath(os.path.join(IMG_LOC,self.imgset[status]))
#loc = os.path.abspath(os.path.join(os.path.dirname(__file__),self.parent.IMG_LOC,self.imgset[status]))
self.progressbar.setVisible(status in (self.STATUS.BUSY, self.STATUS.CLEAN))
#icon
anim = QMovie(loc, QByteArray(), self)
anim.setScaledSize(QSize(self.IMG_WIDTH,self.IMG_HEIGHT))
anim.setCacheMode(QMovie.CacheAll)
anim.setSpeed(self.IMG_SPEED)
self.view.clear()
self.view.setMovie(anim)
anim.start()
self.view.repaint()
QApplication.processEvents(QEventLoop.AllEvents)
def mainWindowEnable(self,enable=True):
cons = (self.lgcombo, self.confcombo, self.destcombo,
self.initbutton, self.replicatebutton, self.cleanbutton, self.cancelbutton,
self.epsgenable,self.fromdateenable,self.todateenable,
self.parent.menubar)
for c in cons:
c.setEnabled(enable)
if enable:
self.epsgcombo.setEnabled(self.epsgenable.checkState())
self.fromdateedit.setEnabled(self.fromdateenable.checkState())
self.todateedit.setEnabled(self.todateenable.checkState())
else:
self.epsgcombo.setEnabled(False)
self.fromdateedit.setEnabled(False)
self.todateedit.setEnabled(False)
QApplication.restoreOverrideCursor() if enable else QApplication.setOverrideCursor(QCursor(Qt.WaitCursor))
def refreshLGCombo(self):
'''Re index LG combobox since a refreshLG call (new dest?) will usually mean new groups'''
self.lgcombo.clear()
self.lgcombo.addItems([i[2] for i in self.parent.confconn.lglist])
#NOTE the separator consumes an index, if not clearing the combobox selectively remove the old sepindex (assumes g preceeds l)
#if self.sepindex:
# self.lgcombo.removeItem(self.sepindex)
self.sepindex = [i[0] for i in self.parent.confconn.lglist].count(LORG.GROUP)
self.lgcombo.insertSeparator(self.sepindex)
def updateLGValues(self,uconf,lgval,dest):
'''Sets the values displayed in the Layer/Group combo'''
#because we cant seem to sort combobox entries and want groups at the top, clear and re-add
#TRACE#
#pdb.set_trace()
sf = None
try:
self.parent.confconn.initConnections(uconf,lgval,dest)
except Exception as e:
sf=1
ldslog.error('Error Updating UC Values. '+str(e))
if sf:
self.setStatus(self.STATUS.ERROR,'Error Updating UC Values', str(e))
else:
self.setStatus(self.STATUS.IDLE)
self.refreshLGCombo()
def centre(self):
qr = self.frameGeometry()
cp = QDesktopWidget().availableGeometry().center()
qr.moveCenter(cp)
self.move(qr.topLeft())
def gprParameters(self,rdest):
'''Zip default and GPR values'''
return [x if LU.assessNone(x) else y for x,y in zip(self.parent.gpr.readsec(rdest),self.parent.DEF_RVALS[1:])]
def getLCE(self,ln):
'''Read layer parameters'''
dep = self.parent.confconn.reg.openEndPoint(self.parent.confconn.destname,self.parent.confconn.uconf)
#sep = self.parent.confconn.reg.openEndPoint('WFS',self.parent.confconn.uconf)
self.parent.confconn.reg.setupLayerConfig(self.parent.confconn.tp,None,dep,initlc=False)
lce = dep.getLayerConf().readLayerParameters(ln)
#self.parent.confconn.reg.closeEndPoint('WFS')
self.parent.confconn.reg.closeEndPoint(self.parent.confconn.destname)
sep,dep = None,None
return lce
def doDestChanged(self):
'''Read the destname parameter and fill dialog with matching GPR values'''
rdest = str(self.destlist[self.destcombo.currentIndex()])
rvals = self.gprParameters(rdest)
self.updateGUIValues([rdest]+rvals)
def doConfChanged(self):
'''Read the user conf parameter and fill dialog with matching GPR values'''
rdest = str(self.destlist[self.destcombo.currentIndex()])
rlg,_,rep,rfd,rtd = self.gprParameters(rdest)
ruc = str(self.cflist[self.confcombo.currentIndex()])
self.updateGUIValues((rdest,rlg,ruc,rep,rfd,rtd))
def doLGComboChanged(self):
'''Read the layer/group value and change epsg to layer or gpr match'''
#get a matching LG entry and test whether its a layer or group
#lgi = self.parent.confconn.getLayerGroupIndex(self.lgcombo.currentText().toUtf8().data())
lgi = self.parent.confconn.getLayerGroupIndex(LQ.readWidgetText(self.lgcombo.currentText()))
#lgi can be none if we init a new group, in which case we use the GPR value
if lgi:
lge = self.parent.confconn.lglist[lgi]
lce = self.getLCE(lge[1]) if lge[0]==LORG.LAYER else None
else:
lce = None
#look for filled layer conf epsg OR use prefs stored in gpr
if lce and LU.assessNone(lce.epsg):
epsgval = lce.epsg
else:
rdest = str(self.destlist[self.destcombo.currentIndex()])
_,_,epsgval,_,_ = self.gprParameters(rdest)
epsgindex = [i[0] for i in self.nzlsr+[(0,0)]+self.rowsr].index(epsgval)
if self.epsgcombo.currentIndex() != epsgindex:
self.epsgcombo.setCurrentIndex(int(epsgindex))
def updateGUIValues(self,readlist):
'''Fill dialog values from provided list'''
#TODO. Remove circular references when setCurrentIndex() triggers do###Changed()
#Read user input
rdest,self.rlgval,ruconf,repsg,rfd,rtd = readlist
#--------------------------------------------------------------------
#Destination Menu
selecteddest = LU.standardiseDriverNames(rdest)
if selecteddest not in self.destlist:
self.destlist = self.getConfiguredDestinations()
self.destcombo.addItem(selecteddest)
destindex = self.destlist.index(selecteddest) if selecteddest else 0
if self.destcombo.currentIndex() != destindex:
self.destcombo.setCurrentIndex(destindex)
#InitButton
self.initbutton.setText('Layer Select')
#Config File
confindex = 0
if LU.assessNone(ruconf):
ruconf = ruconf.split('.')[0]
if ruconf not in self.cflist:
self.cflist += [ruconf,]
self.confcombo.addItem(ruconf)
confindex = self.cflist.index(ruconf)
if self.confcombo.currentIndex() != confindex:
self.confcombo.setCurrentIndex(confindex)
#self.confEdit.setText(ruconf if LU.assessNone(ruconf) else '')
#Layer/Group Selection
self.updateLGValues(ruconf,self.rlgval,rdest)
lgindex = None
if LU.assessNone(self.rlgval):
#index of list value
lgindex = self.parent.confconn.getLayerGroupIndex(self.rlgval,col=1)
if LU.assessNone(lgindex):
#advance by 1 for sep
lgindex += 1 if lgindex>self.sepindex else 0
else:
#using the separator index sets the combo to blank
lgindex = self.sepindex
if self.lgcombo.currentIndex() != lgindex:
self.lgcombo.setCurrentIndex(lgindex)
#self.doLGEditUpdate()
#EPSG
# user > layerconf
#useepsg = LU.precedence(repsg, lce.epsg if lce else None, None)
epsgindex = [i[0] for i in self.nzlsr+[(None,None)]+self.rowsr].index(repsg)
if self.epsgcombo.currentIndex() != epsgindex:
self.epsgcombo.setCurrentIndex(epsgindex)
#epsgedit = self.epsgcombo.lineEdit()
#epsgedit.setText([e[1] for e in self.nzlsr+self.rowsr if e[0]==repsg][0])
#epsgedit.setText([e for e in self.nzlsr+self.rowsr if re.match('^\s*(\d+).*',e).group(1)==repsg][0])
#To/From Dates
if LU.assessNone(rfd):
self.fromdateedit.setDate(QDate(int(rfd[0:4]),int(rfd[5:7]),int(rfd[8:10])))
else:
early = DataStore.EARLIEST_INIT_DATE
self.fromdateedit.setDate(QDate(int(early[0:4]),int(early[5:7]),int(early[8:10])))
if LU.assessNone(rtd):
self.todateedit.setDate(QDate(int(rtd[0:4]),int(rtd[5:7]),int(rtd[8:10])))
else:
today = DataStore.getCurrent()
self.todateedit.setDate(QDate(int(today[0:4]),int(today[5:7]),int(today[8:10])))
#Internal/External CheckBox
# if LU.assessNone(rint):
# self.internalTrigger.setChecked(rint.lower()==DataStore.CONF_INT)
# else:
# self.internalTrigger.setChecked(DataStore.DEFAULT_CONF==DataStore.CONF_INT)
def getConfiguredDestinations(self):
defml = ['',]+DataStore.DRIVER_NAMES.values()
return [d for d in self.parent.gpr.getDestinations() if d in defml]
def doEPSGEnable(self):
self.epsgcombo.setEnabled(self.epsgenable.isChecked())
def doFromDateEnable(self):
self.fromdateedit.setEnabled(self.fromdateenable.isChecked())
def doToDateEnable(self):
self.todateedit.setEnabled(self.todateenable.isChecked())
def readParameters(self):
'''Read values out of dialogs'''
destination = LU.assessNone(str(self.destlist[self.destcombo.currentIndex()]))
#lgindex = self.parent.confconn.getLayerGroupIndex(self.lgcombo.currentText().toUtf8().data())
lgindex = self.parent.confconn.getLayerGroupIndex(LQ.readWidgetText(self.lgcombo.currentText()))
#NB need to test for None explicitly since zero is a valid index
lgval = self.parent.confconn.lglist[lgindex][1] if LU.assessNone(lgindex) else None
#uconf = LU.standardiseUserConfigName(str(self.confcombo.lineEdit().text()))
#uconf = str(self.confcombo.lineEdit().text())
uconf = str(self.cflist[self.confcombo.currentIndex()])
ee = self.epsgenable.isChecked()
epsg = None if ee is False else re.match('^\s*(\d+).*',str(self.epsgcombo.lineEdit().text())).group(1)
fe = self.fromdateenable.isChecked()
te = self.todateenable.isChecked()
fd = None if fe is False else str(self.fromdateedit.date().toString('yyyy-MM-dd'))
td = None if te is False else str(self.todateedit.date().toString('yyyy-MM-dd'))
return destination,lgval,uconf,epsg,fe,te,fd,td
def doInitClickAction(self):
'''Initialise the LC on LC-button-click, action'''
try:
try:
self.setStatus(self.STATUS.BUSY,'Opening Layer-Config Editor')
self.progressbar.setValue(0)
self.parent.runLayerConfigAction()
finally:
self.setStatus(self.STATUS.IDLE,'Ready')
except Exception as e:
self.setStatus(self.STATUS.ERROR,'Error in Layer-Config',str(sys.exc_info()))#e))
def doCleanClickAction(self):
'''Set clean anim and run clean'''
#lgo = self.lgcombo.currentText().toUtf8().data()
lgo = LQ.readWidgetText(self.lgcombo.currentText())
try:
self.setStatus(self.STATUS.CLEAN,'Running Clean '+lgo)
self.progressbar.setValue(0)
self.runReplicationScript(True)
except Exception as e:
self.setStatus(self.STATUS.ERROR,'Failed Clean of '+lgo,str(sys.exc_info()))#e))
def doReplicateClickAction(self):
'''Set busy anim and run repl'''
lgo = self.lgcombo.currentText()#.toUtf8().data()#only used for error messages
try:
self.setStatus(self.STATUS.BUSY,'Running Replicate '+lgo)
self.progressbar.setValue(0)
self.runReplicationScript(False)
ldslog.debug('TRPfinish')
except Exception as e:
self.setStatus(self.STATUS.ERROR,'Failed Replication of '+lgo,str(sys.exc_info()))#e))
def runReplicationScript(self,clean=False):
'''Run the layer/group repliction script'''
destination,lgval,uconf,epsg,fe,te,fd,td = self.readParameters()
uconf_path = LU.standardiseUserConfigName(uconf)
destination_path = LU.standardiseLayerConfigName(destination)
destination_driver = LU.standardiseDriverNames(destination)
if not os.path.exists(uconf_path):
self.userConfMessage(uconf_path)
return
elif not MainFileReader(uconf_path).hasSection(destination_driver):
self.userConfMessage(uconf_path,destination_driver)
return
#-----------------------------------------------------
#'destname','layer','uconf','group','epsg','fd','td','int'
self.parent.gpr.write((destination_driver,lgval,uconf,epsg,fd,td))
ldslog.info(u'dest={0}, lg={1}, conf={2}, epsg={3}'.format(destination_driver,lgval,uconf,epsg))
ldslog.info('fd={0}, td={1}, fe={2}, te={3}'.format(fd,td,fe,te))
lgindex = self.parent.confconn.getLayerGroupIndex(lgval,col=1)
#lorg = self.parent.confconn.lglist[lgindex][0]
#----------don't need lorg in TP anymore but it is useful for sorting/counting groups
#self.parent.confconn.tp.setLayerOrGroup(lorg)
self.parent.confconn.tp.setLayerGroupValue(lgval)
if self.fromdateenable.isChecked(): self.parent.confconn.tp.setFromDate(fd)
if self.todateenable.isChecked(): self.parent.confconn.tp.setToDate(td)
self.parent.confconn.tp.setUserConf(uconf)
if self.epsgenable: self.parent.confconn.tp.setEPSG(epsg)
#because clean state persists in TP
if clean:
self.parent.confconn.tp.setCleanConfig()
else:
self.parent.confconn.tp.clearCleanConfig()
#(re)initialise the data source since uconf may have changed
#>>#self.parent.confconn.tp.src = self.parent.confconn.initSourceWrapper()
#--------------------------
###ep = self.parent.confconn.reg.openEndPoint(self.parent.confconn.destname,self.parent.confconn.uconf)
###self.parent.confconn.reg.closeEndPoint(self.parent.confconn.destname)
###ep = None
#Open ProcessRunner and run with TP(proc)/self(gui) instances
#HACK temp add of dest_drv to PR call
try:
#TODO. Test for valid LC first
self.tpr = ProcessRunner(self,destination_driver)
except Exception as e:
ldslog.error('Cannot create ProcessRunner {}. NB Possible missing Layer Config {}'.format(str(e),destination_path))
self.layerConfMessage(destination_path)
return
#If PR has been successfully created we must vave a valid dst
ldslog.debug('TRPstart')
self.tpr.start()
# def quitProcessRunner(self):
# self.tpr.join()
# self.tpr.quit()
# self.trp = None
def userConfMessage(self,uconf,secname=None):
ucans = QMessageBox.warning(self, 'User Config Missing/Incomplete',
'Specified User-Config file, '+str(uconf)+' does not exist' if secname is None else 'User-Config file does not contain '+str(secname)+' section',
'Back','Initialise User Config')
if not ucans:
#Retry
ldslog.warn('Retry specifying UC')
#self.confcombo.setCurrentIndex(0)
return
#Init
ldslog.warn('Reset User Config Wizard')
self.parent.runWizardAction()
def layerConfMessage(self,dest):
lcans = QMessageBox.warning(self, 'Layer Config Missing',
'Required Layer-Config file, '+str(dest)+' does not exist',
'Back','Run Layer Select')
if not lcans:
#Retry
ldslog.warn('Retry specifying LC')
#self.destcombo.setCurrentIndex(0)
return
#Init
ldslog.warn('Reset Layer Config')
self.doInitClickAction()