def start():
# Start the Qt main object
app = QApplication([])
# Start the bluesky network client
client = GuiClient()
# Enable HiDPI support (Qt5 only)
if QT_VERSION >= 0x050000:
app.setAttribute(Qt.AA_UseHighDpiPixmaps)
splash = Splash()
# Register our custom pan/zoom event
for etype in range(1000, 1000 + NUMCUSTOMEVENTS):
reg_etype = QEvent.registerEventType(etype)
if reg_etype != etype:
print((
'Warning: Registered event type differs from requested type id (%d != %d)'
% (reg_etype, etype)))
splash.show()
# Install error message handler
handler = QErrorMessage.qtHandler()
handler.setWindowFlags(Qt.WindowStaysOnTopHint)
# Check and set OpenGL capabilities
if not QGLFormat.hasOpenGL():
raise RuntimeError('No OpenGL support detected for this system!')
else:
f = QGLFormat()
f.setVersion(3, 3)
f.setProfile(QGLFormat.CoreProfile)
f.setDoubleBuffer(True)
QGLFormat.setDefaultFormat(f)
print(('QGLWidget initialized for OpenGL version %d.%d' %
(f.majorVersion(), f.minorVersion())))
splash.showMessage('Constructing main window')
app.processEvents()
win = MainWindow()
win.show()
splash.showMessage('Done!')
app.processEvents()
splash.finish(win)
# If this instance of the gui is started in client-only mode, show
# server selection dialog
if bs.settings.is_client:
dialog = DiscoveryDialog(win)
dialog.show()
bs.net.start_discovery()
else:
client.connect(event_port=bs.settings.event_port,
stream_port=bs.settings.stream_port)
# Start the Qt main loop
app.exec_()
def start(mode):
# Install message handler for Qt messages
qInstallMessageHandler(gui_msg_handler)
# Start the Qt main object
app = QApplication([])
# Start the bluesky network client
client = GuiClient()
# Enable HiDPI support (Qt5 only)
if QT_VERSION >= 0x050000:
app.setAttribute(Qt.AA_UseHighDpiPixmaps)
splash = Splash()
# Register our custom pan/zoom event
for etype in range(1000, 1000 + NUMCUSTOMEVENTS):
reg_etype = QEvent.registerEventType(etype)
if reg_etype != etype:
print(('Warning: Registered event type differs from requested type id (%d != %d)' % (reg_etype, etype)))
splash.show()
# Install error message handler
handler = QErrorMessage.qtHandler()
handler.setWindowFlags(Qt.WindowStaysOnTopHint)
# Check and set OpenGL capabilities
if not QGLFormat.hasOpenGL():
raise RuntimeError('No OpenGL support detected for this system!')
else:
f = QGLFormat()
f.setVersion(3, 3)
f.setProfile(QGLFormat.CoreProfile)
f.setDoubleBuffer(True)
QGLFormat.setDefaultFormat(f)
print(('QGLWidget initialized for OpenGL version %d.%d' % (f.majorVersion(), f.minorVersion())))
splash.showMessage('Constructing main window')
app.processEvents()
win = MainWindow(mode)
win.show()
splash.showMessage('Done!')
app.processEvents()
splash.finish(win)
# If this instance of the gui is started in client-only mode, show
# server selection dialog
if mode == 'client':
dialog = DiscoveryDialog(win)
dialog.show()
bs.net.start_discovery()
else:
client.connect(event_port=bs.settings.event_port,
stream_port=bs.settings.stream_port)
# Start the Qt main loop
app.exec_()
def start(mode, hostname=None):
# Install message handler for Qt messages
qInstallMessageHandler(gui_msg_handler)
# Start the Qt main object
app = QApplication([])
# Start the bluesky network client
client = GuiClient()
# Enable HiDPI support (Qt5 only)
if QT_VERSION >= 0x050000:
app.setAttribute(Qt.AA_UseHighDpiPixmaps)
splash = Splash()
# Register our custom pan/zoom event
for etype in range(1000, 1000 + NUMCUSTOMEVENTS):
reg_etype = QEvent.registerEventType(etype)
if reg_etype != etype:
print((
'Warning: Registered event type differs from requested type id (%d != %d)'
% (reg_etype, etype)))
splash.show()
# Install error message handler
handler = QErrorMessage.qtHandler()
handler.setWindowFlags(Qt.WindowStaysOnTopHint)
splash.showMessage('Constructing main window')
app.processEvents()
win = MainWindow(mode)
win.show()
splash.showMessage('Done!')
app.processEvents()
splash.finish(win)
# If this instance of the gui is started in client-only mode, show
# server selection dialog
if mode == 'client' and hostname is None:
dialog = DiscoveryDialog(win)
dialog.show()
bs.net.start_discovery()
else:
client.connect(hostname=hostname or 'localhost',
event_port=bs.settings.event_port,
stream_port=bs.settings.stream_port)
# Start the Qt main loop
app.exec_()
def __init__(self):
super(Gui, self).__init__([])
self.acdata = ACDataEvent()
self.birddata = BirdDataEvent()
self.navdb = None
self.radarwidget = []
self.command_history = []
self.cmd = ''
self.args = []
self.history_pos = 0
self.command_mem = ''
self.command_line = ''
self.prev_cmdline = ''
self.mousedragged = False
self.mousepos = (0, 0)
self.prevmousepos = (0, 0)
self.panzoomchanged = False
self.simt = 0.0
# Register our custom pan/zoom event
for etype in range(1000, 1000 + NUMEVENTS):
reg_etype = QEvent.registerEventType(etype)
if reg_etype != etype:
print(
'Warning: Registered event type differs from requested type id (%d != %d)'
% (reg_etype, etype))
self.splash = Splash()
self.splash.show()
# Install error message handler
handler = QErrorMessage.qtHandler()
handler.setWindowFlags(Qt.WindowStaysOnTopHint)
# Check and set OpenGL capabilities
if not QGLFormat.hasOpenGL():
raise RuntimeError('No OpenGL support detected for this system!')
else:
f = QGLFormat()
f.setVersion(3, 3)
f.setProfile(QGLFormat.CoreProfile)
f.setDoubleBuffer(True)
QGLFormat.setDefaultFormat(f)
print('QGLWidget initialized for OpenGL version %d.%d' %
(f.majorVersion(), f.minorVersion()))
# Enable HiDPI support (Qt5 only)
if QT_VERSION == 5:
self.setAttribute(Qt.AA_UseHighDpiPixmaps)
def __init__(self):
super(Gui, self).__init__([])
self.acdata = ACDataEvent()
self.routedata = RouteDataEvent()
self.navdb = None
self.radarwidget = []
self.command_history = []
self.cmd = ''
self.args = []
self.history_pos = 0
self.command_mem = ''
self.command_line = ''
self.prev_cmdline = ''
self.mousedragged = False
self.mousepos = (0, 0)
self.prevmousepos = (0, 0)
self.panzoomchanged = False
self.simt = 0.0
# Register our custom pan/zoom event
for etype in range(1000, 1000 + NUMEVENTS):
reg_etype = QEvent.registerEventType(etype)
if reg_etype != etype:
print('Warning: Registered event type differs from requested type id (%d != %d)' % (reg_etype, etype))
self.splash = Splash()
self.splash.show()
# Install error message handler
handler = QErrorMessage.qtHandler()
handler.setWindowFlags(Qt.WindowStaysOnTopHint)
# Check and set OpenGL capabilities
if not QGLFormat.hasOpenGL():
raise RuntimeError('No OpenGL support detected for this system!')
else:
f = QGLFormat()
f.setVersion(3, 3)
f.setProfile(QGLFormat.CoreProfile)
f.setDoubleBuffer(True)
QGLFormat.setDefaultFormat(f)
print('QGLWidget initialized for OpenGL version %d.%d' % (f.majorVersion(), f.minorVersion()))
# Enable HiDPI support (Qt5 only)
if QT_VERSION == 5:
self.setAttribute(Qt.AA_UseHighDpiPixmaps)
def handleError(error):
em = QErrorMessage.qtHandler()
em.showMessage(str(error))
def start(mode):
# Install message handler for Qt messages
qInstallMessageHandler(gui_msg_handler)
# Start the Qt main object
app = QApplication([])
# Start the bluesky network client
client = GuiClient()
# Enable HiDPI support (Qt5 only)
if QT_VERSION >= 0x050000:
app.setAttribute(Qt.AA_UseHighDpiPixmaps)
splash = Splash()
# Register our custom pan/zoom event
for etype in range(1000, 1000 + NUMCUSTOMEVENTS):
reg_etype = QEvent.registerEventType(etype)
if reg_etype != etype:
print((
'Warning: Registered event type differs from requested type id (%d != %d)'
% (reg_etype, etype)))
splash.show()
# Install error message handler
handler = QErrorMessage.qtHandler()
handler.setWindowFlags(Qt.WindowStaysOnTopHint)
# Check and set OpenGL capabilities
if not QGLFormat.hasOpenGL():
raise RuntimeError('No OpenGL support detected for this system!')
else:
f = QGLFormat()
f.setVersion(3, 3)
f.setProfile(QGLFormat.CoreProfile)
f.setDoubleBuffer(True)
QGLFormat.setDefaultFormat(f)
print(('QGLWidget initialized for OpenGL version %d.%d' %
(f.majorVersion(), f.minorVersion())))
splash.showMessage('Constructing main window')
app.processEvents()
win = MainWindow(mode)
splash.showMessage('Done!')
app.processEvents()
splash.finish(win)
# Quick hack to connect to a remote simulation
import sys
arg = '--bluesky_host='
host = next((x for x in sys.argv if x.startswith(arg)), None)
if host is not None:
host = host[len(arg):]
try:
print('Attempting connection to BlueSky at: {}'.format(host))
client.connect(hostname=host,
event_port=bs.settings.event_port,
stream_port=bs.settings.stream_port,
timeout=5)
except TimeoutError:
print('Failed to connect to BlueSky server at {}, exiting'.format(
host))
QApplication.quit()
sys.exit(0)
win.show()
app.exec_()
return
win.show()
# If this instance of the gui is started in client-only mode, show
# server selection dialog
if mode == 'client':
dialog = DiscoveryDialog(win)
dialog.show()
bs.net.start_discovery()
else:
client.connect(event_port=bs.settings.event_port,
stream_port=bs.settings.stream_port)
# Start the Qt main loop
app.exec_()
def __init__(self, navdb):
super(Gui, self).__init__([])
self.acdata = ACDataEvent()
self.navdb = navdb
self.radarwidget = []
self.command_history = []
self.cmdargs = []
self.history_pos = 0
self.command_mem = ''
self.command_line = ''
self.prev_cmdline = ''
self.simevent_target = 0
self.mousedragged = False
self.mousepos = (0, 0)
self.prevmousepos = (0, 0)
self.panzoomchanged = False
self.simt = 0.0
# Register our custom pan/zoom event
for etype in [PanZoomEventType, ACDataEventType, SimInfoEventType,
StackTextEventType, ShowDialogEventType,
DisplayFlagEventType, RouteDataEventType,
DisplayShapeEventType, SimQuitEventType,
AMANEventType]:
reg_etype = QEvent.registerEventType(etype)
if reg_etype != etype:
print('Warning: Registered event type differs from requested type id (%d != %d)' % (reg_etype, etype))
self.splash = Splash()
self.splash.show()
self.splash.showMessage('Constructing main window')
self.processEvents()
# Install error message handler
handler = QErrorMessage.qtHandler()
handler.setWindowFlags(Qt.WindowStaysOnTopHint)
# Check and set OpenGL capabilities
if not QGLFormat.hasOpenGL():
raise RuntimeError('No OpenGL support detected for this system!')
else:
f = QGLFormat()
f.setVersion(3, 3)
f.setProfile(QGLFormat.CoreProfile)
f.setDoubleBuffer(True)
QGLFormat.setDefaultFormat(f)
print('QGLWidget initialized for OpenGL version %d.%d' % (f.majorVersion(), f.minorVersion()))
# Create the main window and related widgets
self.radarwidget = RadarWidget(navdb)
self.win = MainWindow(self, self.radarwidget)
self.nd = ND(shareWidget=self.radarwidget)
#self.aman = AMANDisplay(shareWidget=self.radarwidget)
# Enable HiDPI support (Qt5 only)
if QT_VERSION == 5:
self.setAttribute(Qt.AA_UseHighDpiPixmaps)
timer = QTimer(self)
timer.timeout.connect(self.radarwidget.updateGL)
timer.timeout.connect(self.nd.updateGL)
#timer.timeout.connect(self.aman.updateGL)
timer.start(50)
def showErrorMsg(s):
'''show the error diglog.'''
error_msg = QErrorMessage.qtHandler()
error_msg.showMessage(s)
