コード例 #1
0
ファイル: scl3711.py プロジェクト: djoproject/old.RFIDShell
    def nfcType3Read(ServiceCodeList, BlockCodeList):
        Data = []
        for s in ServiceCodeList:
            if s < 0 or s > 0xFFFF:
                raise apduBuilderException(
                    "invalid argument in service code list, a value between 0 and 65535 was expected, got "
                    + str(s))

            lsb = s & 0xFF
            msb = (s >> 8) & 0xFF

            Data.extend([msb, lsb])

        for s in BlockCodeList:
            if s < 0 or s > 0xFFFF:
                raise apduBuilderException(
                    "invalid argument in block code list, a value between 0 and 65535 was expected, got "
                    + str(s))

            lsb = s & 0xFF
            msb = (s >> 8) & 0xFF

            Data.extend([msb, lsb])

        return ApduDefault(cla=0xFF,
                           ins=0x46,
                           p1=len(ServiceCodes),
                           p2=len(BlockCodes),
                           data=Data)
コード例 #2
0
    def nfcType3Write(ServiceCodeList,BlockCodeList,DataList):
        #check len(BlockCodeList) vs len(DataList)
        if len(BlockCodeList) * 16 != len(DataList):
            raise apduBuilderException("invalid DataList size, must be a list equals to "+str(len(BlockCodeList) * 16)+" bytes, got "+str(len(DataList)))
        
        Data = []
        for s in ServiceCodeList:
            if s < 0 or s > 0xFFFF:
                raise apduBuilderException("invalid argument in service code list, a value between 0 and 65535 was expected, got "+str(s))
                
            lsb = s&0xFF
            msb = (s>>8)&0xFF
            
            Data.extend([msb,lsb])
            
        for s in BlockCodeList:
            if s < 0 or s > 0xFFFF:
                raise apduBuilderException("invalid argument in block code list, a value between 0 and 65535 was expected, got "+str(s))

            lsb = s&0xFF
            msb = (s>>8)&0xFF

            Data.extend([msb,lsb])
            
        #append DataList
        Data.extend(DataList)
        
        return ApduDefault(cla=0xFF,ins=0x48,p1=len(ServiceCodes),p2=len(BlockCodes),data=Data)
コード例 #3
0
ファイル: scl3711.py プロジェクト: djoproject/old.RFIDShell
    def nfcType1WriteByte(byteValue, byteNumber=0, blockNumber=0, erase=True):
        if byteValue < 0 or byteValue > 255:
            raise apduBuilderException(
                "invalid argument byteValue, a value between 0 and 255 was expected, got "
                + str(byteValue))

        if byteNumber < 0 or byteNumber > 7:
            raise apduBuilderException(
                "invalid argument byteNumber, a value between 0 and 7 was expected, got "
                + str(byteNumber))

        if blockNumber < 0 or blockNumber > 0xE:
            raise apduBuilderException(
                "invalid argument byteNumber, a value between 0 and 14 was expected, got "
                + str(byteNumber))

        P2 = (byteNumber & 0x7) | ((blockNumber & 0x0f) << 3)

        if erase:
            return ApduDefault(cla=0xFF,
                               ins=0x56,
                               p1=0x00,
                               p2=P2,
                               data=[byteValue])
        else:
            return ApduDefault(cla=0xFF,
                               ins=0x58,
                               p1=0x00,
                               p2=P2,
                               data=[byteValue])
コード例 #4
0
    def mifareClassifWrite(blockNumber,datas,KeyName = None):
        if blockNumber < 0 or blockNumber > 255:
            raise apduBuilderException("invalid argument blockNumber, a value between 0 and 255 was expected, got "+str(blockNumber))

        if len(datas) < 1 or len(datas) > 255:
            raise apduBuilderException("invalid datas size, must be a list from 1 to 255 item, got "+str(len(datas)))
            
        if (len(datas) % 16) != 0:
            raise apduBuilderException("invalid datas size, must be a multiple of 16")

        if KeyName == None:
            return ApduDefault(cla=0xFF,ins=0xF4,p1=0x00,p2=blockNumber,data=datas)
        else:
            if KeyName not in keys:
                raise apduBuilderException("the key name doesn't exist "+str(KeyName))

            if len(keys[KeyName]) != 6:
                raise apduBuilderException("invalid key length, must be 6, got "+str(len(keys[KeyName])))
            
            #if len(KeyName) != 6:
            #    raise apduBuilderException("invalid key size, must be 6, got "+str(len(KeyName)))
        
            toSend = []
            toSend.extend(datas)
            toSend.extend(keys[KeyName])
            return ApduDefault(cla=0xFF,ins=0xF4,p1=0x00,p2=blockNumber,data=toSend)
コード例 #5
0
ファイル: scl3711.py プロジェクト: djoproject/old.RFIDShell
    def increment(address=0, value=0x01, increment=True):
        if address < 0 or address > 255:
            raise apduBuilderException(
                "invalid argument address, a value between 0 and 255 was expected, got "
                + str(address))

        if value < 0 or value > 0xFFFFFFFF:
            raise apduBuilderException(
                "invalid argument value, a value between 0 and 4294967295 was expected, got "
                + str(value))

        if increment:
            return ApduDefault(cla=0xFF,
                               ins=0xF0,
                               p1=0x00,
                               p2=address,
                               data=[
                                   0xC0, address, value & 0xFF,
                                   (value >> 8) & 0xFF, (value >> 16) & 0xFF,
                                   (value >> 24) & 0xFF
                               ])
        else:
            return ApduDefault(cla=0xFF,
                               ins=0xF0,
                               p1=0x00,
                               p2=address,
                               data=[
                                   0xC1, address, value & 0xFF,
                                   (value >> 8) & 0xFF, (value >> 16) & 0xFF,
                                   (value >> 24) & 0xFF
                               ])
コード例 #6
0
    def updateBinary(datas,address=0):
        if address < 0 or address > 255:
            raise apduBuilderException("invalid argument address, a value between 0 and 255 was expected, got "+str(address))

        if len(datas) < 1 or len(datas) > 255:
            raise apduBuilderException("invalid datas size, must be a list from 1 to 255 item, got "+str(len(datas)))

        return ApduDefault(cla=0xFF,ins=0xD6,p1=0x00,p2=address&0xFF,data=datas)
コード例 #7
0
 def writeSector(datas, address=0):
     if address < 0 or address > 0x0F:
         raise apduBuilderException("invalid argument address, a value between 0 and 15 was expected, got "+str(address))
     
     if len(datas) != 4:
         raise apduBuilderException("invalid datas size, must be a list with 4 item, got "+str(len(datas)))
     
     return ApduMifareUltralight(ins=0xA2,param=(address&0xFF),data=datas)
コード例 #8
0
 def nfcType1ReadByte(byteNumber=0,blockNumber=0):
     if byteNumber < 0 or byteNumber > 7:
         raise apduBuilderException("invalid argument byteNumber, a value between 0 and 7 was expected, got "+str(byteNumber))
     
     if blockNumber < 0 or blockNumber > 0xE:
         raise apduBuilderException("invalid argument byteNumber, a value between 0 and 14 was expected, got "+str(byteNumber))
     
     P2 = (byteNumber&0x7) | ((blockNumber&0x0f)<<3)
     
     return ApduDefault(cla=0xFF,ins=0x54,p1=0x00,p2=P2)
コード例 #9
0
 def CompatibilityWrite(datas, address=0):
     if address < 0 or address > 0x0F:
         raise apduBuilderException("invalid argument address, a value between 0 and 15 was expected, got "+str(address))
     
     if len(datas) != 4:
         raise apduBuilderException("invalid datas size, must be a list with 4 item, got "+str(len(datas)))
     
     datas.extend([0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00])
     
     return ApduMifareUltralight(ins=0xA0,param=(address&0xFF),data=datas)
コード例 #10
0
 def InListPassiveTarget(BrTy,MaxTg=1,InitiatorData=[]):
     if MaxTg < 1 or MaxTg > 2:
         raise apduBuilderException("invalid argument MaxTg, a value between 1 and 2 was expected, got "+str(MaxTg))
 
     if BrTy < 0 or BrTy > 4:
         raise apduBuilderException("invalid argument BrTy, a value between 0 and 4 was expected, got "+str(BrTy))
 
     data = [MaxTg,BrTy]
     data.extend(InitiatorData)
     return ApduPn53x(0x4A,data)
コード例 #11
0
    def increment(address=0,value=0x01,increment=True):
        if address < 0 or address > 255:
            raise apduBuilderException("invalid argument address, a value between 0 and 255 was expected, got "+str(address))

        if value < 0 or value > 0xFFFFFFFF:
            raise apduBuilderException("invalid argument value, a value between 0 and 4294967295 was expected, got "+str(value))
            
        if increment:
            return ApduDefault(cla=0xFF,ins=0xF0,p1=0x00,p2=address,data=[0xC0,address,value&0xFF,(value>>8)&0xFF,(value>>16)&0xFF,(value>>24)&0xFF])
        else:
            return ApduDefault(cla=0xFF,ins=0xF0,p1=0x00,p2=address,data=[0xC1,address,value&0xFF,(value>>8)&0xFF,(value>>16)&0xFF,(value>>24)&0xFF])
コード例 #12
0
 def nfcType3REQC(serviceCode,RFU,TSN):
     if serviceCode < 0 or serviceCode > 0xFFFF:
         raise apduBuilderException("invalid argument serviceCode, a value between 0 and 65535 was expected, got "+str(serviceCode))
     
     if RFU < 0 or RFU > 0xFF:
         raise apduBuilderException("invalid argument RFU, a value between 0 and 255 was expected, got "+str(RFU))
     
     if TSN < 0 or TSN > 0xFF:
         raise apduBuilderException("invalid argument TSN, a value between 0 and 255 was expected, got "+str(TSN))
         
     return ApduDefault(cla=0xFF,ins=0x40,p1=0x00,p2=0x00,data=[(serviceCode>>8)&0xFF,serviceCode&0xFF,RFU,TSN])
コード例 #13
0
 def nfcType1Write8Bytes(bytes,address=0,erase=True):
     if address < 0 or address > 0xFF:
         raise apduBuilderException("invalid argument address, a value between 0 and 255 was expected, got "+str(address))
         
     if len(bytes) != 8:
         raise apduBuilderException("invalid bytes size, must be a list of 8 item, got "+str(len(bytes)))
     
     if erase:
         return ApduDefault(cla=0xFF,ins=0x5E,p1=0x00,p2=address,data=bytes)
     else:
         return ApduDefault(cla=0xFF,ins=0x60,p1=0x00,p2=address,data=bytes)
コード例 #14
0
 def mifareDecrement(address,value = 0):
     if address < 0 or address > 65535:
         raise apduBuilderException("invalid argument address, a value between 0 and 65535 was expected, got "+str(address))
         
     if value < 0 or value > 0xffffffff:
         raise apduBuilderException("invalid argument value, a value between 0 and "+str(0xffffffff)+" was expected, got "+str(value))
 
     lsb = address&0xFF
     msb = (address>>8)&0xFF
     
     return ApduDefault(cla=0xFF,ins=0xD8,p1=msb,p2=lsb,data=[value&0xff , (value>>8)&0xff , (value>>16)&0xff , (value>>24)&0xff])
コード例 #15
0
 def test(expected_answer_size = 0,delay_to_answer=0, datas = []):
     
     if expected_answer_size < 0 or expected_answer_size > 255:
         raise apduBuilderException("invalid argument expected_answer_size, a value between 0 and 255 was expected, got "+str(expected_answer_size))
         
     if delay_to_answer < 0 or delay_to_answer > 63:
         raise apduBuilderException("invalid argument delay_to_answer, a value between 0 and 63 was expected, got "+str(delay_to_answer))
         
     if len(datas) < 0 or len(datas) > 255:
         raise apduBuilderException("invalid argument datas, a value list of length 0 to 255 was expected, got "+str(len(datas)))
     
     return ApduDefault(cla=0xFF,ins=0xFD,p1=expected_answer_size,p2=delay_to_answer,data=datas)
コード例 #16
0
    def ledAndBuzzerControl(initialRed, initialGreen, finalRed, finalGreen,
                            T1Duration, T2Duration, Repetition, LinkToBuzzer):
        "acr122 manage led and buzzer"

        P2 = 0

        if finalRed != None:
            if finalRed:
                P2 |= 0x01
            P2 |= 0x04

        if finalGreen != None:
            if finalGreen:
                P2 |= 0x02
            P2 |= 0x08

        if initialRed != None:
            if initialRed:
                P2 |= 0x10
            P2 |= 0x40

        if initialGreen != None:
            if initialGreen:
                P2 |= 0x20
            P2 |= 0x80

        if T1Duration < 1 or T1Duration > 255:
            raise apduBuilderException(
                "invalid argument T1Duration, must be a value between 1 and 255, got "
                + str(T1Duration))

        if T2Duration < 1 or T2Duration > 255:
            raise apduBuilderException(
                "invalid argument T2Duration, must be a value between 1 and 255, got "
                + str(T2Duration))

        if Repetition < 1 or Repetition > 255:
            raise apduBuilderException(
                "invalid argument Repetition, must be a value between 1 and 255, got "
                + str(Repetition))

        if LinkToBuzzer < 0 or LinkToBuzzer > 3:
            raise apduBuilderException(
                "invalid argument LinkToBuzzer, must be a value between 0 and 4, got "
                + str(LinkToBuzzer))

        return ApduDefault(
            cla=0xFF,
            ins=0x00,
            p1=0x40,
            p2=P2,
            data=[T1Duration, T2Duration, Repetition, LinkToBuzzer])
コード例 #17
0
ファイル: scl3711.py プロジェクト: djoproject/old.RFIDShell
    def nfcType1ReadByte(byteNumber=0, blockNumber=0):
        if byteNumber < 0 or byteNumber > 7:
            raise apduBuilderException(
                "invalid argument byteNumber, a value between 0 and 7 was expected, got "
                + str(byteNumber))

        if blockNumber < 0 or blockNumber > 0xE:
            raise apduBuilderException(
                "invalid argument byteNumber, a value between 0 and 14 was expected, got "
                + str(byteNumber))

        P2 = (byteNumber & 0x7) | ((blockNumber & 0x0f) << 3)

        return ApduDefault(cla=0xFF, ins=0x54, p1=0x00, p2=P2)
コード例 #18
0
ファイル: pn532.py プロジェクト: djoproject/old.RFIDShell
    def InListPassiveTarget(BrTy, MaxTg=1, InitiatorData=[]):
        if MaxTg < 1 or MaxTg > 2:
            raise apduBuilderException(
                "invalid argument MaxTg, a value between 1 and 2 was expected, got "
                + str(MaxTg))

        if BrTy < 0 or BrTy > 4:
            raise apduBuilderException(
                "invalid argument BrTy, a value between 0 and 4 was expected, got "
                + str(BrTy))

        data = [MaxTg, BrTy]
        data.extend(InitiatorData)
        return ApduPn53x(0x4A, data)
コード例 #19
0
 def encapsulate(datas,protocolType=0x00,timeoutType=0x00,defaultSW = True):
     
     #TODO limite de 255
     
     if timeoutType < 0 or timeoutType > 0x0D:
         raise apduBuilderException("invalid argument timeoutType, a value between 0 and 13 was expected, got "+str(timeoutType))
         
     if protocolType != 0x00 and protocolType != 0x01 and protocolType != 0x02 and protocolType != 0x04 and protocolType != 0x05 and protocolType != 0x09 and protocolType != 0x0A and protocolType != 0x0C and protocolType != 0x0F and protocolType != 0x1F and protocolType != 0x2F and protocolType != 0x3F and protocolType != 0x4F and protocolType != 0x5F and protocolType != 0x6F and protocolType != 0x7F and protocolType != 0x80 and protocolType != 0x81 and protocolType != 0x82 and protocolType != 0x83 and protocolType != 0x84:
         raise apduBuilderException("invalid argument protocolType, see the documentation")
         
     if not defaultSW:
         timeoutType &= 0x80
         
     return ApduDefault(cla=0xFF,ins=0xFE,p1=protocolType,p2=timeoutType,data=datas)
コード例 #20
0
    def writeSector(datas, address=0):
        if address < 0 or address > 0x0F:
            raise apduBuilderException(
                "invalid argument address, a value between 0 and 15 was expected, got "
                + str(address))

        if len(datas) != 4:
            raise apduBuilderException(
                "invalid datas size, must be a list with 4 item, got " +
                str(len(datas)))

        return ApduMifareUltralight(ins=0xA2,
                                    param=(address & 0xFF),
                                    data=datas)
コード例 #21
0
 def setLedColorFun(red,green,yellow_blue = None):        
     if red < 0 or red > 5:
         raise apduBuilderException("invalid argument red, a value between 0 and 5 was expected, got "+str(red))
         
     if green < 0 or green > 5:
         raise apduBuilderException("invalid argument green, a value between 0 and 5 was expected, got "+str(green))
     
     if yellow_blue == None:
         d = [0x1E,red,green]
     else:
         if yellow_blue < 0 or yellow_blue > 5:
             raise apduBuilderException("invalid argument yellow_blue, a value between 0 and 5 was expected, got "+str(yellow_blue))
         d = [0x1E,red,green,yellow_blue]
     
     return ApduDefault(cla=0xFF,ins=0xF0,p1=0x00,p2=0x00,data=d)
コード例 #22
0
ファイル: pn532.py プロジェクト: djoproject/old.RFIDShell
    def InSelect():
        if target < 0 or target > 2:
            raise apduBuilderException(
                "invalid argument target, a value between 0 and 2 was expected, got "
                + str(target))

        return ApduPn53x(0x54, [target])
コード例 #23
0
ファイル: pn532.py プロジェクト: djoproject/old.RFIDShell
    def InDataExchange(target, args=[]):
        if target < 1 or target > 2:
            raise apduBuilderException(
                "invalid argument target, a value between 1 and 2 was expected, got "
                + str(target))

        return ApduPn53x(0x02, args)
コード例 #24
0
 def directTransmit(args):
     "acr122 transmit data to pn532"
     
     if len(args) < 1 or len(args) > 255:
         raise apduBuilderException("invalid args size, must be a list from 1 to 255 item, got "+str(len(datas)))
     
     return ApduDefault(cla=0xFF,ins=0x00,p1=0x00,p2=0x00,data=args)
コード例 #25
0
 def getResponse(Length):
     "acr122 get response from pn532"
     
     if Length < 1 or Length > 255:
         raise apduBuilderException("invalid argument Length, must be a value between 1 and 255, got "+str(Length))
         
     return ApduDefault(cla=0xFF,ins=0xC0,p1=0x00,p2=0x00,expected_answer=Length)
コード例 #26
0
ファイル: scl3711.py プロジェクト: djoproject/old.RFIDShell
    def nfcType1Read8bytes(address=0):
        if address < 0 or address > 0xFF:
            raise apduBuilderException(
                "invalid argument address, a value between 0 and 255 was expected, got "
                + str(address))

        return ApduDefault(cla=0xFF, ins=0x5C, p1=0x00, p2=address)
コード例 #27
0
ファイル: scl3711.py プロジェクト: djoproject/old.RFIDShell
    def updateBinary(datas, address=0):
        if address < 0 or address > 255:
            raise apduBuilderException(
                "invalid argument address, a value between 0 and 255 was expected, got "
                + str(address))

        if len(datas) < 1 or len(datas) > 255:
            raise apduBuilderException(
                "invalid datas size, must be a list from 1 to 255 item, got " +
                str(len(datas)))

        return ApduDefault(cla=0xFF,
                           ins=0xD6,
                           p1=0x00,
                           p2=address & 0xFF,
                           data=datas)
コード例 #28
0
ファイル: scl3711.py プロジェクト: djoproject/old.RFIDShell
    def readBinary(address=0):
        if address < 0 or address > 255:
            raise apduBuilderException(
                "invalid argument address, a value between 0 and 255 was expected, got "
                + str(address))

        return ApduDefault(cla=0xFF, ins=0xB0, p1=0x00, p2=address & 0xFF)
コード例 #29
0
    def readSector(address=0):
        if address < 0 or address > 0x0F:
            raise apduBuilderException(
                "invalid argument address, a value between 0 and 15 was expected, got "
                + str(address))

        return ApduMifareUltralight(ins=0x30, param=(address & 0xFF))
コード例 #30
0
 def nfcType1WriteByte(byteValue,byteNumber=0,blockNumber=0,erase=True):
     if byteValue < 0 or byteValue > 255:
         raise apduBuilderException("invalid argument byteValue, a value between 0 and 255 was expected, got "+str(byteValue))
     
     if byteNumber < 0 or byteNumber > 7:
         raise apduBuilderException("invalid argument byteNumber, a value between 0 and 7 was expected, got "+str(byteNumber))
     
     if blockNumber < 0 or blockNumber > 0xE:
         raise apduBuilderException("invalid argument byteNumber, a value between 0 and 14 was expected, got "+str(byteNumber))
     
     P2 = (byteNumber&0x7) | ((blockNumber&0x0f)<<3)
     
     if erase:
         return ApduDefault(cla=0xFF,ins=0x56,p1=0x00,p2=P2,data=[byteValue])
     else:
         return ApduDefault(cla=0xFF,ins=0x58,p1=0x00,p2=P2,data=[byteValue])
コード例 #31
0
    def generalAuthenticate(blockNumber,isTypeA = True,KeyIndex = 0):
        if blockNumber < 0 or blockNumber > 65535:
            raise apduBuilderException("invalid argument blockNumber, a value between 0 and 65535 was expected, got "+str(blockNumber))

        lsb = address&0xFF
        msb = (address>>8)&0xFF

        if KeyIndex < 0 or KeyIndex > 255: #verification hasardeuse, le nombre de cle dans la doc n'est pas dis
            raise apduBuilderException("invalid argument KeyIndex, a value between 0 and 255 was expected, got "+str(KeyIndex))

        if isTypeA:
            datas = [0x01,msb,lsb,0x60,KeyIndex]
        else:
            datas = [0x01,msb,lsb,0x61,KeyIndex]

        return ApduDefault(cla=0xFF,ins=0x88,p1=0x00,p2=0x00,data=datas)
コード例 #32
0
 def sendCommandGenericSession(Cmd):
     if len(Cmd) < 1 or len(Cmd) > 249:
         raise apduBuilderException("invalid Cmd size, must be a list from 1 to 249 item, got "+str(len(Cmd)))
         
     d = [0x01, 0x00,0xF3, 0x00, 0x00, 0x64]
     d.extend(Cmd)
     return ApduDefault(cla=0xFF,ins=0xA0,p1=0x00,p2=0x05,data=[0x01 , 0x00 , 0x02])
コード例 #33
0
    def selectType(TYPE=0):
        if TYPE < 0 or TYPE > 0xD:
            raise apduBuilderException(
                "invalid argument TYPE, a value between 0 and 13 was expected, got "
                + str(TYPE))

        return ApduDefault(cla=0xFF, ins=0xA4, p1=0x00, p2=0x00, data=[TYPE])
コード例 #34
0
 def setBuzzerDuration(duration):
     if duration < 0 or duration > 60000:
         raise apduBuilderException("invalid argument duration, a value between 0 and 60000 was expected, got "+str(duration))
     
     lsb = duration&0xFF
     msb = (duration>>8)&0xFF
     
     return ApduDefault(cla=0xFF,ins=0xF0,p1=0x00,p2=0x00,data=[0x1C,msb,lsb])
コード例 #35
0
    def mifareClassicRead(blockNumber,KeyName = None):
        if blockNumber < 0 or blockNumber > 255:
            raise apduBuilderException("invalid argument blockNumber, a value between 0 and 255 was expected, got "+str(blockNumber))
        
        if KeyName == None:
            return ApduDefault(cla=0xFF,ins=0xF3,p1=0x00,p2=blockNumber)
        else:
            if KeyName not in keys:
                raise apduBuilderException("the key name doesn't exist "+str(KeyName))

            if len(keys[KeyName]) != 6:
                raise apduBuilderException("invalid key length, must be 6, got "+str(len(keys[KeyName])))
            
            #if len(KeyName) != 6:
            #    raise apduBuilderException("invalid key size, must be 6, got "+str(len(KeyName)))
                
            return ApduDefault(cla=0xFF,ins=0xF3,p1=0x00,p2=blockNumber,data=keys[KeyName])
コード例 #36
0
 def iclassGetKeySlotInfo(KeySlot=0,Secured=False):
     
     if KeySlot < 0 or KeySlot > 255:
         raise apduBuilderException("invalid argument KeySlot, a value between 0 and 255 was expected, got "+str(address))
     
     if Secured:
         return ApduDefault(cla=0x84,ins=0xC4,p1=0x00,p2=KeySlot,data=[])
     else:
         return ApduDefault(cla=0x80,ins=0xC4,p1=0x00,p2=KeySlot,data=[])
コード例 #37
0
    def directTransmit(args):
        "acr122 transmit data to pn532"

        if len(args) < 1 or len(args) > 255:
            raise apduBuilderException(
                "invalid args size, must be a list from 1 to 255 item, got " +
                str(len(datas)))

        return ApduDefault(cla=0xFF, ins=0x00, p1=0x00, p2=0x00, data=args)
コード例 #38
0
    def CompatibilityWrite(datas, address=0):
        if address < 0 or address > 0x0F:
            raise apduBuilderException(
                "invalid argument address, a value between 0 and 15 was expected, got "
                + str(address))

        if len(datas) != 4:
            raise apduBuilderException(
                "invalid datas size, must be a list with 4 item, got " +
                str(len(datas)))

        datas.extend([
            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
            0x00
        ])

        return ApduMifareUltralight(ins=0xA0,
                                    param=(address & 0xFF),
                                    data=datas)
コード例 #39
0
ファイル: scl3711.py プロジェクト: djoproject/old.RFIDShell
    def nfcType1ReadSegment(address=0):
        if address < 0 or address > 0xF:
            raise apduBuilderException(
                "invalid argument address, a value between 0 and 15 was expected, got "
                + str(address))

        return ApduDefault(cla=0xFF,
                           ins=0x5A,
                           p1=0x00,
                           p2=((address & 0xF) << 4))
コード例 #40
0
ファイル: scl3711.py プロジェクト: djoproject/old.RFIDShell
    def generalAuthenticate(blockNumber, isTypeA=True, KeyIndex=0):
        if blockNumber < 0 or blockNumber > 65535:
            raise apduBuilderException(
                "invalid argument blockNumber, a value between 0 and 65535 was expected, got "
                + str(blockNumber))

        lsb = address & 0xFF
        msb = (address >> 8) & 0xFF

        if KeyIndex < 0 or KeyIndex > 255:  #verification hasardeuse, le nombre de cle dans la doc n'est pas dis
            raise apduBuilderException(
                "invalid argument KeyIndex, a value between 0 and 255 was expected, got "
                + str(KeyIndex))

        if isTypeA:
            datas = [0x01, msb, lsb, 0x60, KeyIndex]
        else:
            datas = [0x01, msb, lsb, 0x61, KeyIndex]

        return ApduDefault(cla=0xFF, ins=0x88, p1=0x00, p2=0x00, data=datas)
コード例 #41
0
    def loadKey(KeyIndex,KeyName,InVolatile = True ,isTypeA = True):
        if KeyName not in keys:
            raise apduBuilderException("the key name doesn't exist "+str(KeyName))
        
        #only allow mifare key
        if len(keys[KeyName]) != 6:
            raise apduBuilderException("invalid key length, must be 6, got "+str(len(keys[KeyName])))

        #proxnroll specific params
        if InVolatile:
            if KeyIndex < 0 or KeyIndex > 3:
                raise apduBuilderException("invalid argument KeyIndex, a value between 0 and 3 was expected, got "+str(KeyIndex))
        else:
            if KeyIndex < 0 or KeyIndex > 15:
                raise apduBuilderException("invalid argument KeyIndex, a value between 0 and 15 was expected, got "+str(KeyIndex))
        
        #B key special index
        if not isTypeA:
            KeyIndex &= 0x10
            
        return pcscAPDUBuilder.loadKey(KeyIndex,KeyName,InVolatile)
コード例 #42
0
    def loadKey(KeyName,isTypeA = True):
        #TODO KeyName
        
        if len(Key) != 6:
            raise apduBuilderException("invalid key size, must be 6, got "+str(len(Key)))

        if isTypeA:
            P2 = 0x60
        else:
            P2 = 0x61
            
        return ApduDefault(cla=0xFF,ins=0x82,p1=0x00,p2=P2,data=Key)
コード例 #43
0
    def nfcType3Read(ServiceCodeList,BlockCodeList):
        Data = []
        for s in ServiceCodeList:
            if s < 0 or s > 0xFFFF:
                raise apduBuilderException("invalid argument in service code list, a value between 0 and 65535 was expected, got "+str(s))
                
            lsb = s&0xFF
            msb = (s>>8)&0xFF
            
            Data.extend([msb,lsb])
            
        for s in BlockCodeList:
            if s < 0 or s > 0xFFFF:
                raise apduBuilderException("invalid argument in block code list, a value between 0 and 65535 was expected, got "+str(s))

            lsb = s&0xFF
            msb = (s>>8)&0xFF

            Data.extend([msb,lsb])
        
        return ApduDefault(cla=0xFF,ins=0x46,p1=len(ServiceCodes),p2=len(BlockCodes),data=Data)
コード例 #44
0
ファイル: scl3711.py プロジェクト: djoproject/old.RFIDShell
    def nfcType3Write(ServiceCodeList, BlockCodeList, DataList):
        #check len(BlockCodeList) vs len(DataList)
        if len(BlockCodeList) * 16 != len(DataList):
            raise apduBuilderException(
                "invalid DataList size, must be a list equals to " +
                str(len(BlockCodeList) * 16) + " bytes, got " +
                str(len(DataList)))

        Data = []
        for s in ServiceCodeList:
            if s < 0 or s > 0xFFFF:
                raise apduBuilderException(
                    "invalid argument in service code list, a value between 0 and 65535 was expected, got "
                    + str(s))

            lsb = s & 0xFF
            msb = (s >> 8) & 0xFF

            Data.extend([msb, lsb])

        for s in BlockCodeList:
            if s < 0 or s > 0xFFFF:
                raise apduBuilderException(
                    "invalid argument in block code list, a value between 0 and 65535 was expected, got "
                    + str(s))

            lsb = s & 0xFF
            msb = (s >> 8) & 0xFF

            Data.extend([msb, lsb])

        #append DataList
        Data.extend(DataList)

        return ApduDefault(cla=0xFF,
                           ins=0x48,
                           p1=len(ServiceCodes),
                           p2=len(BlockCodes),
                           data=Data)
コード例 #45
0
ファイル: omnikey.py プロジェクト: djoproject/old.RFIDShell
    def mifareDecrement(address, value=0):
        if address < 0 or address > 65535:
            raise apduBuilderException(
                "invalid argument address, a value between 0 and 65535 was expected, got "
                + str(address))

        if value < 0 or value > 0xffffffff:
            raise apduBuilderException(
                "invalid argument value, a value between 0 and " +
                str(0xffffffff) + " was expected, got " + str(value))

        lsb = address & 0xFF
        msb = (address >> 8) & 0xFF

        return ApduDefault(cla=0xFF,
                           ins=0xD8,
                           p1=msb,
                           p2=lsb,
                           data=[
                               value & 0xff, (value >> 8) & 0xff,
                               (value >> 16) & 0xff, (value >> 24) & 0xff
                           ])
コード例 #46
0
ファイル: omnikey.py プロジェクト: djoproject/old.RFIDShell
    def sendCommandGenericSession(Cmd):
        if len(Cmd) < 1 or len(Cmd) > 249:
            raise apduBuilderException(
                "invalid Cmd size, must be a list from 1 to 249 item, got " +
                str(len(Cmd)))

        d = [0x01, 0x00, 0xF3, 0x00, 0x00, 0x64]
        d.extend(Cmd)
        return ApduDefault(cla=0xFF,
                           ins=0xA0,
                           p1=0x00,
                           p2=0x05,
                           data=[0x01, 0x00, 0x02])
コード例 #47
0
ファイル: scl3711.py プロジェクト: djoproject/old.RFIDShell
    def loadKey(KeyName, isTypeA=True):
        #TODO KeyName

        if len(Key) != 6:
            raise apduBuilderException("invalid key size, must be 6, got " +
                                       str(len(Key)))

        if isTypeA:
            P2 = 0x60
        else:
            P2 = 0x61

        return ApduDefault(cla=0xFF, ins=0x82, p1=0x00, p2=P2, data=Key)
コード例 #48
0
ファイル: scl3711.py プロジェクト: djoproject/old.RFIDShell
    def nfcType3REQC(serviceCode, RFU, TSN):
        if serviceCode < 0 or serviceCode > 0xFFFF:
            raise apduBuilderException(
                "invalid argument serviceCode, a value between 0 and 65535 was expected, got "
                + str(serviceCode))

        if RFU < 0 or RFU > 0xFF:
            raise apduBuilderException(
                "invalid argument RFU, a value between 0 and 255 was expected, got "
                + str(RFU))

        if TSN < 0 or TSN > 0xFF:
            raise apduBuilderException(
                "invalid argument TSN, a value between 0 and 255 was expected, got "
                + str(TSN))

        return ApduDefault(cla=0xFF,
                           ins=0x40,
                           p1=0x00,
                           p2=0x00,
                           data=[(serviceCode >> 8) & 0xFF, serviceCode & 0xFF,
                                 RFU, TSN])
コード例 #49
0
 def ledAndBuzzerControl(initialRed,initialGreen,finalRed,finalGreen,T1Duration,T2Duration,Repetition,LinkToBuzzer):
     "acr122 manage led and buzzer"
     
     P2 = 0
     
     if finalRed != None:
         if finalRed:
             P2 |= 0x01
         P2 |= 0x04
     
     if finalGreen != None:
         if finalGreen:
             P2 |= 0x02
         P2 |= 0x08
     
     if initialRed != None:
         if initialRed:
             P2 |= 0x10
         P2 |= 0x40
         
     if initialGreen != None:
         if initialGreen:
             P2 |= 0x20
         P2 |= 0x80    
         
     if T1Duration < 1 or T1Duration > 255:
         raise apduBuilderException("invalid argument T1Duration, must be a value between 1 and 255, got "+str(T1Duration))
     
     if T2Duration < 1 or T2Duration > 255:
         raise apduBuilderException("invalid argument T2Duration, must be a value between 1 and 255, got "+str(T2Duration))
     
     if Repetition < 1 or Repetition > 255:
         raise apduBuilderException("invalid argument Repetition, must be a value between 1 and 255, got "+str(Repetition))
         
     if LinkToBuzzer < 0 or LinkToBuzzer > 3:
         raise apduBuilderException("invalid argument LinkToBuzzer, must be a value between 0 and 4, got "+str(LinkToBuzzer))
         
     return ApduDefault(cla=0xFF,ins=0x00,p1=0x40,p2=P2,data=[T1Duration,T2Duration,Repetition,LinkToBuzzer])
コード例 #50
0
 def generalAuthenticate(blockNumber,KeyIndex,InVolatile = True ,isTypeA = True):
     if blockNumber < 0 or blockNumber > 255:
         raise apduBuilderException("invalid argument blockNumber, a value between 0 and 255 was expected, got "+str(blockNumber))
     
     if InVolatile:
         if KeyIndex < 0 or KeyIndex > 3:
             raise apduBuilderException("invalid argument KeyIndex, a value between 0 and 3 was expected, got "+str(KeyIndex))
         
         #volatile key special index
         KeyIndex &= 0x20
     else:
         if KeyIndex < 0 or KeyIndex > 15:
             raise apduBuilderException("invalid argument KeyIndex, a value between 0 and 15 was expected, got "+str(KeyIndex))
         
     #if isTypeA:
     #    datas = [0x01,0x00,blockNumber,0x60,KeyIndex]
     #else:
     #    datas = [0x01,0x00,blockNumber,0x61,KeyIndex]
     #    
     ap = pcscAPDUBuilder.generalAuthenticate(blockNumber,KeyIndex,InVolatile,isTypeA)
     
     ap.setIns(0x88)
  
     return ap
コード例 #51
0
 def nfcType1ReadSegment(address=0):
     if address < 0 or address > 0xF:
         raise apduBuilderException("invalid argument address, a value between 0 and 15 was expected, got "+str(address))
 
     return ApduDefault(cla=0xFF,ins=0x5A,p1=0x00,p2=((address&0xF)<<4))
コード例 #52
0
    def readBinary(address = 0):
        if address < 0 or address > 255:
            raise apduBuilderException("invalid argument address, a value between 0 and 255 was expected, got "+str(address))

        return ApduDefault(cla=0xFF,ins=0xB0,p1=0x00,p2=address&0xFF)
コード例 #53
0
    def nfcType1Read8bytes(address=0):
        if address < 0 or address > 0xFF:
            raise apduBuilderException("invalid argument address, a value between 0 and 255 was expected, got "+str(address))

        return ApduDefault(cla=0xFF,ins=0x5C,p1=0x00,p2=address)