def nfcType3Read(ServiceCodeList, BlockCodeList):
Data = []
for s in ServiceCodeList:
if s < 0 or s > 0xFFFF:
raise apduBuilderException(
"invalid argument in service code list, a value between 0 and 65535 was expected, got "
+ str(s))
lsb = s & 0xFF
msb = (s >> 8) & 0xFF
Data.extend([msb, lsb])
for s in BlockCodeList:
if s < 0 or s > 0xFFFF:
raise apduBuilderException(
"invalid argument in block code list, a value between 0 and 65535 was expected, got "
+ str(s))
lsb = s & 0xFF
msb = (s >> 8) & 0xFF
Data.extend([msb, lsb])
return ApduDefault(cla=0xFF,
ins=0x46,
p1=len(ServiceCodes),
p2=len(BlockCodes),
data=Data)
def nfcType3Write(ServiceCodeList,BlockCodeList,DataList):
#check len(BlockCodeList) vs len(DataList)
if len(BlockCodeList) * 16 != len(DataList):
raise apduBuilderException("invalid DataList size, must be a list equals to "+str(len(BlockCodeList) * 16)+" bytes, got "+str(len(DataList)))
Data = []
for s in ServiceCodeList:
if s < 0 or s > 0xFFFF:
raise apduBuilderException("invalid argument in service code list, a value between 0 and 65535 was expected, got "+str(s))
lsb = s&0xFF
msb = (s>>8)&0xFF
Data.extend([msb,lsb])
for s in BlockCodeList:
if s < 0 or s > 0xFFFF:
raise apduBuilderException("invalid argument in block code list, a value between 0 and 65535 was expected, got "+str(s))
lsb = s&0xFF
msb = (s>>8)&0xFF
Data.extend([msb,lsb])
#append DataList
Data.extend(DataList)
return ApduDefault(cla=0xFF,ins=0x48,p1=len(ServiceCodes),p2=len(BlockCodes),data=Data)
def nfcType1WriteByte(byteValue, byteNumber=0, blockNumber=0, erase=True):
if byteValue < 0 or byteValue > 255:
raise apduBuilderException(
"invalid argument byteValue, a value between 0 and 255 was expected, got "
+ str(byteValue))
if byteNumber < 0 or byteNumber > 7:
raise apduBuilderException(
"invalid argument byteNumber, a value between 0 and 7 was expected, got "
+ str(byteNumber))
if blockNumber < 0 or blockNumber > 0xE:
raise apduBuilderException(
"invalid argument byteNumber, a value between 0 and 14 was expected, got "
+ str(byteNumber))
P2 = (byteNumber & 0x7) | ((blockNumber & 0x0f) << 3)
if erase:
return ApduDefault(cla=0xFF,
ins=0x56,
p1=0x00,
p2=P2,
data=[byteValue])
else:
return ApduDefault(cla=0xFF,
ins=0x58,
p1=0x00,
p2=P2,
data=[byteValue])
def mifareClassifWrite(blockNumber,datas,KeyName = None):
if blockNumber < 0 or blockNumber > 255:
raise apduBuilderException("invalid argument blockNumber, a value between 0 and 255 was expected, got "+str(blockNumber))
if len(datas) < 1 or len(datas) > 255:
raise apduBuilderException("invalid datas size, must be a list from 1 to 255 item, got "+str(len(datas)))
if (len(datas) % 16) != 0:
raise apduBuilderException("invalid datas size, must be a multiple of 16")
if KeyName == None:
return ApduDefault(cla=0xFF,ins=0xF4,p1=0x00,p2=blockNumber,data=datas)
else:
if KeyName not in keys:
raise apduBuilderException("the key name doesn't exist "+str(KeyName))
if len(keys[KeyName]) != 6:
raise apduBuilderException("invalid key length, must be 6, got "+str(len(keys[KeyName])))
#if len(KeyName) != 6:
# raise apduBuilderException("invalid key size, must be 6, got "+str(len(KeyName)))
toSend = []
toSend.extend(datas)
toSend.extend(keys[KeyName])
return ApduDefault(cla=0xFF,ins=0xF4,p1=0x00,p2=blockNumber,data=toSend)
def increment(address=0, value=0x01, increment=True):
if address < 0 or address > 255:
raise apduBuilderException(
"invalid argument address, a value between 0 and 255 was expected, got "
+ str(address))
if value < 0 or value > 0xFFFFFFFF:
raise apduBuilderException(
"invalid argument value, a value between 0 and 4294967295 was expected, got "
+ str(value))
if increment:
return ApduDefault(cla=0xFF,
ins=0xF0,
p1=0x00,
p2=address,
data=[
0xC0, address, value & 0xFF,
(value >> 8) & 0xFF, (value >> 16) & 0xFF,
(value >> 24) & 0xFF
])
else:
return ApduDefault(cla=0xFF,
ins=0xF0,
p1=0x00,
p2=address,
data=[
0xC1, address, value & 0xFF,
(value >> 8) & 0xFF, (value >> 16) & 0xFF,
(value >> 24) & 0xFF
])
def updateBinary(datas,address=0):
if address < 0 or address > 255:
raise apduBuilderException("invalid argument address, a value between 0 and 255 was expected, got "+str(address))
if len(datas) < 1 or len(datas) > 255:
raise apduBuilderException("invalid datas size, must be a list from 1 to 255 item, got "+str(len(datas)))
return ApduDefault(cla=0xFF,ins=0xD6,p1=0x00,p2=address&0xFF,data=datas)
def writeSector(datas, address=0):
if address < 0 or address > 0x0F:
raise apduBuilderException("invalid argument address, a value between 0 and 15 was expected, got "+str(address))
if len(datas) != 4:
raise apduBuilderException("invalid datas size, must be a list with 4 item, got "+str(len(datas)))
return ApduMifareUltralight(ins=0xA2,param=(address&0xFF),data=datas)
def nfcType1ReadByte(byteNumber=0,blockNumber=0):
if byteNumber < 0 or byteNumber > 7:
raise apduBuilderException("invalid argument byteNumber, a value between 0 and 7 was expected, got "+str(byteNumber))
if blockNumber < 0 or blockNumber > 0xE:
raise apduBuilderException("invalid argument byteNumber, a value between 0 and 14 was expected, got "+str(byteNumber))
P2 = (byteNumber&0x7) | ((blockNumber&0x0f)<<3)
return ApduDefault(cla=0xFF,ins=0x54,p1=0x00,p2=P2)
def CompatibilityWrite(datas, address=0):
if address < 0 or address > 0x0F:
raise apduBuilderException("invalid argument address, a value between 0 and 15 was expected, got "+str(address))
if len(datas) != 4:
raise apduBuilderException("invalid datas size, must be a list with 4 item, got "+str(len(datas)))
datas.extend([0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00])
return ApduMifareUltralight(ins=0xA0,param=(address&0xFF),data=datas)
def InListPassiveTarget(BrTy,MaxTg=1,InitiatorData=[]):
if MaxTg < 1 or MaxTg > 2:
raise apduBuilderException("invalid argument MaxTg, a value between 1 and 2 was expected, got "+str(MaxTg))
if BrTy < 0 or BrTy > 4:
raise apduBuilderException("invalid argument BrTy, a value between 0 and 4 was expected, got "+str(BrTy))
data = [MaxTg,BrTy]
data.extend(InitiatorData)
return ApduPn53x(0x4A,data)
def increment(address=0,value=0x01,increment=True):
if address < 0 or address > 255:
raise apduBuilderException("invalid argument address, a value between 0 and 255 was expected, got "+str(address))
if value < 0 or value > 0xFFFFFFFF:
raise apduBuilderException("invalid argument value, a value between 0 and 4294967295 was expected, got "+str(value))
if increment:
return ApduDefault(cla=0xFF,ins=0xF0,p1=0x00,p2=address,data=[0xC0,address,value&0xFF,(value>>8)&0xFF,(value>>16)&0xFF,(value>>24)&0xFF])
else:
return ApduDefault(cla=0xFF,ins=0xF0,p1=0x00,p2=address,data=[0xC1,address,value&0xFF,(value>>8)&0xFF,(value>>16)&0xFF,(value>>24)&0xFF])
def nfcType3REQC(serviceCode,RFU,TSN):
if serviceCode < 0 or serviceCode > 0xFFFF:
raise apduBuilderException("invalid argument serviceCode, a value between 0 and 65535 was expected, got "+str(serviceCode))
if RFU < 0 or RFU > 0xFF:
raise apduBuilderException("invalid argument RFU, a value between 0 and 255 was expected, got "+str(RFU))
if TSN < 0 or TSN > 0xFF:
raise apduBuilderException("invalid argument TSN, a value between 0 and 255 was expected, got "+str(TSN))
return ApduDefault(cla=0xFF,ins=0x40,p1=0x00,p2=0x00,data=[(serviceCode>>8)&0xFF,serviceCode&0xFF,RFU,TSN])
def nfcType1Write8Bytes(bytes,address=0,erase=True):
if address < 0 or address > 0xFF:
raise apduBuilderException("invalid argument address, a value between 0 and 255 was expected, got "+str(address))
if len(bytes) != 8:
raise apduBuilderException("invalid bytes size, must be a list of 8 item, got "+str(len(bytes)))
if erase:
return ApduDefault(cla=0xFF,ins=0x5E,p1=0x00,p2=address,data=bytes)
else:
return ApduDefault(cla=0xFF,ins=0x60,p1=0x00,p2=address,data=bytes)
def mifareDecrement(address,value = 0):
if address < 0 or address > 65535:
raise apduBuilderException("invalid argument address, a value between 0 and 65535 was expected, got "+str(address))
if value < 0 or value > 0xffffffff:
raise apduBuilderException("invalid argument value, a value between 0 and "+str(0xffffffff)+" was expected, got "+str(value))
lsb = address&0xFF
msb = (address>>8)&0xFF
return ApduDefault(cla=0xFF,ins=0xD8,p1=msb,p2=lsb,data=[value&0xff , (value>>8)&0xff , (value>>16)&0xff , (value>>24)&0xff])
def test(expected_answer_size = 0,delay_to_answer=0, datas = []):
if expected_answer_size < 0 or expected_answer_size > 255:
raise apduBuilderException("invalid argument expected_answer_size, a value between 0 and 255 was expected, got "+str(expected_answer_size))
if delay_to_answer < 0 or delay_to_answer > 63:
raise apduBuilderException("invalid argument delay_to_answer, a value between 0 and 63 was expected, got "+str(delay_to_answer))
if len(datas) < 0 or len(datas) > 255:
raise apduBuilderException("invalid argument datas, a value list of length 0 to 255 was expected, got "+str(len(datas)))
return ApduDefault(cla=0xFF,ins=0xFD,p1=expected_answer_size,p2=delay_to_answer,data=datas)
def ledAndBuzzerControl(initialRed, initialGreen, finalRed, finalGreen,
T1Duration, T2Duration, Repetition, LinkToBuzzer):
"acr122 manage led and buzzer"
P2 = 0
if finalRed != None:
if finalRed:
P2 |= 0x01
P2 |= 0x04
if finalGreen != None:
if finalGreen:
P2 |= 0x02
P2 |= 0x08
if initialRed != None:
if initialRed:
P2 |= 0x10
P2 |= 0x40
if initialGreen != None:
if initialGreen:
P2 |= 0x20
P2 |= 0x80
if T1Duration < 1 or T1Duration > 255:
raise apduBuilderException(
"invalid argument T1Duration, must be a value between 1 and 255, got "
+ str(T1Duration))
if T2Duration < 1 or T2Duration > 255:
raise apduBuilderException(
"invalid argument T2Duration, must be a value between 1 and 255, got "
+ str(T2Duration))
if Repetition < 1 or Repetition > 255:
raise apduBuilderException(
"invalid argument Repetition, must be a value between 1 and 255, got "
+ str(Repetition))
if LinkToBuzzer < 0 or LinkToBuzzer > 3:
raise apduBuilderException(
"invalid argument LinkToBuzzer, must be a value between 0 and 4, got "
+ str(LinkToBuzzer))
return ApduDefault(
cla=0xFF,
ins=0x00,
p1=0x40,
p2=P2,
data=[T1Duration, T2Duration, Repetition, LinkToBuzzer])
def nfcType1ReadByte(byteNumber=0, blockNumber=0):
if byteNumber < 0 or byteNumber > 7:
raise apduBuilderException(
"invalid argument byteNumber, a value between 0 and 7 was expected, got "
+ str(byteNumber))
if blockNumber < 0 or blockNumber > 0xE:
raise apduBuilderException(
"invalid argument byteNumber, a value between 0 and 14 was expected, got "
+ str(byteNumber))
P2 = (byteNumber & 0x7) | ((blockNumber & 0x0f) << 3)
return ApduDefault(cla=0xFF, ins=0x54, p1=0x00, p2=P2)
def InListPassiveTarget(BrTy, MaxTg=1, InitiatorData=[]):
if MaxTg < 1 or MaxTg > 2:
raise apduBuilderException(
"invalid argument MaxTg, a value between 1 and 2 was expected, got "
+ str(MaxTg))
if BrTy < 0 or BrTy > 4:
raise apduBuilderException(
"invalid argument BrTy, a value between 0 and 4 was expected, got "
+ str(BrTy))
data = [MaxTg, BrTy]
data.extend(InitiatorData)
return ApduPn53x(0x4A, data)
def encapsulate(datas,protocolType=0x00,timeoutType=0x00,defaultSW = True):
#TODO limite de 255
if timeoutType < 0 or timeoutType > 0x0D:
raise apduBuilderException("invalid argument timeoutType, a value between 0 and 13 was expected, got "+str(timeoutType))
if protocolType != 0x00 and protocolType != 0x01 and protocolType != 0x02 and protocolType != 0x04 and protocolType != 0x05 and protocolType != 0x09 and protocolType != 0x0A and protocolType != 0x0C and protocolType != 0x0F and protocolType != 0x1F and protocolType != 0x2F and protocolType != 0x3F and protocolType != 0x4F and protocolType != 0x5F and protocolType != 0x6F and protocolType != 0x7F and protocolType != 0x80 and protocolType != 0x81 and protocolType != 0x82 and protocolType != 0x83 and protocolType != 0x84:
raise apduBuilderException("invalid argument protocolType, see the documentation")
if not defaultSW:
timeoutType &= 0x80
return ApduDefault(cla=0xFF,ins=0xFE,p1=protocolType,p2=timeoutType,data=datas)
def writeSector(datas, address=0):
if address < 0 or address > 0x0F:
raise apduBuilderException(
"invalid argument address, a value between 0 and 15 was expected, got "
+ str(address))
if len(datas) != 4:
raise apduBuilderException(
"invalid datas size, must be a list with 4 item, got " +
str(len(datas)))
return ApduMifareUltralight(ins=0xA2,
param=(address & 0xFF),
data=datas)
def setLedColorFun(red,green,yellow_blue = None):
if red < 0 or red > 5:
raise apduBuilderException("invalid argument red, a value between 0 and 5 was expected, got "+str(red))
if green < 0 or green > 5:
raise apduBuilderException("invalid argument green, a value between 0 and 5 was expected, got "+str(green))
if yellow_blue == None:
d = [0x1E,red,green]
else:
if yellow_blue < 0 or yellow_blue > 5:
raise apduBuilderException("invalid argument yellow_blue, a value between 0 and 5 was expected, got "+str(yellow_blue))
d = [0x1E,red,green,yellow_blue]
return ApduDefault(cla=0xFF,ins=0xF0,p1=0x00,p2=0x00,data=d)
def InSelect():
if target < 0 or target > 2:
raise apduBuilderException(
"invalid argument target, a value between 0 and 2 was expected, got "
+ str(target))
return ApduPn53x(0x54, [target])
def InDataExchange(target, args=[]):
if target < 1 or target > 2:
raise apduBuilderException(
"invalid argument target, a value between 1 and 2 was expected, got "
+ str(target))
return ApduPn53x(0x02, args)
def directTransmit(args):
"acr122 transmit data to pn532"
if len(args) < 1 or len(args) > 255:
raise apduBuilderException("invalid args size, must be a list from 1 to 255 item, got "+str(len(datas)))
return ApduDefault(cla=0xFF,ins=0x00,p1=0x00,p2=0x00,data=args)
def getResponse(Length):
"acr122 get response from pn532"
if Length < 1 or Length > 255:
raise apduBuilderException("invalid argument Length, must be a value between 1 and 255, got "+str(Length))
return ApduDefault(cla=0xFF,ins=0xC0,p1=0x00,p2=0x00,expected_answer=Length)
def nfcType1Read8bytes(address=0):
if address < 0 or address > 0xFF:
raise apduBuilderException(
"invalid argument address, a value between 0 and 255 was expected, got "
+ str(address))
return ApduDefault(cla=0xFF, ins=0x5C, p1=0x00, p2=address)
def updateBinary(datas, address=0):
if address < 0 or address > 255:
raise apduBuilderException(
"invalid argument address, a value between 0 and 255 was expected, got "
+ str(address))
if len(datas) < 1 or len(datas) > 255:
raise apduBuilderException(
"invalid datas size, must be a list from 1 to 255 item, got " +
str(len(datas)))
return ApduDefault(cla=0xFF,
ins=0xD6,
p1=0x00,
p2=address & 0xFF,
data=datas)
def readBinary(address=0):
if address < 0 or address > 255:
raise apduBuilderException(
"invalid argument address, a value between 0 and 255 was expected, got "
+ str(address))
return ApduDefault(cla=0xFF, ins=0xB0, p1=0x00, p2=address & 0xFF)
def readSector(address=0):
if address < 0 or address > 0x0F:
raise apduBuilderException(
"invalid argument address, a value between 0 and 15 was expected, got "
+ str(address))
return ApduMifareUltralight(ins=0x30, param=(address & 0xFF))
def nfcType1WriteByte(byteValue,byteNumber=0,blockNumber=0,erase=True):
if byteValue < 0 or byteValue > 255:
raise apduBuilderException("invalid argument byteValue, a value between 0 and 255 was expected, got "+str(byteValue))
if byteNumber < 0 or byteNumber > 7:
raise apduBuilderException("invalid argument byteNumber, a value between 0 and 7 was expected, got "+str(byteNumber))
if blockNumber < 0 or blockNumber > 0xE:
raise apduBuilderException("invalid argument byteNumber, a value between 0 and 14 was expected, got "+str(byteNumber))
P2 = (byteNumber&0x7) | ((blockNumber&0x0f)<<3)
if erase:
return ApduDefault(cla=0xFF,ins=0x56,p1=0x00,p2=P2,data=[byteValue])
else:
return ApduDefault(cla=0xFF,ins=0x58,p1=0x00,p2=P2,data=[byteValue])
def generalAuthenticate(blockNumber,isTypeA = True,KeyIndex = 0):
if blockNumber < 0 or blockNumber > 65535:
raise apduBuilderException("invalid argument blockNumber, a value between 0 and 65535 was expected, got "+str(blockNumber))
lsb = address&0xFF
msb = (address>>8)&0xFF
if KeyIndex < 0 or KeyIndex > 255: #verification hasardeuse, le nombre de cle dans la doc n'est pas dis
raise apduBuilderException("invalid argument KeyIndex, a value between 0 and 255 was expected, got "+str(KeyIndex))
if isTypeA:
datas = [0x01,msb,lsb,0x60,KeyIndex]
else:
datas = [0x01,msb,lsb,0x61,KeyIndex]
return ApduDefault(cla=0xFF,ins=0x88,p1=0x00,p2=0x00,data=datas)
def sendCommandGenericSession(Cmd):
if len(Cmd) < 1 or len(Cmd) > 249:
raise apduBuilderException("invalid Cmd size, must be a list from 1 to 249 item, got "+str(len(Cmd)))
d = [0x01, 0x00,0xF3, 0x00, 0x00, 0x64]
d.extend(Cmd)
return ApduDefault(cla=0xFF,ins=0xA0,p1=0x00,p2=0x05,data=[0x01 , 0x00 , 0x02])
def selectType(TYPE=0):
if TYPE < 0 or TYPE > 0xD:
raise apduBuilderException(
"invalid argument TYPE, a value between 0 and 13 was expected, got "
+ str(TYPE))
return ApduDefault(cla=0xFF, ins=0xA4, p1=0x00, p2=0x00, data=[TYPE])
def setBuzzerDuration(duration):
if duration < 0 or duration > 60000:
raise apduBuilderException("invalid argument duration, a value between 0 and 60000 was expected, got "+str(duration))
lsb = duration&0xFF
msb = (duration>>8)&0xFF
return ApduDefault(cla=0xFF,ins=0xF0,p1=0x00,p2=0x00,data=[0x1C,msb,lsb])
def mifareClassicRead(blockNumber,KeyName = None):
if blockNumber < 0 or blockNumber > 255:
raise apduBuilderException("invalid argument blockNumber, a value between 0 and 255 was expected, got "+str(blockNumber))
if KeyName == None:
return ApduDefault(cla=0xFF,ins=0xF3,p1=0x00,p2=blockNumber)
else:
if KeyName not in keys:
raise apduBuilderException("the key name doesn't exist "+str(KeyName))
if len(keys[KeyName]) != 6:
raise apduBuilderException("invalid key length, must be 6, got "+str(len(keys[KeyName])))
#if len(KeyName) != 6:
# raise apduBuilderException("invalid key size, must be 6, got "+str(len(KeyName)))
return ApduDefault(cla=0xFF,ins=0xF3,p1=0x00,p2=blockNumber,data=keys[KeyName])
def iclassGetKeySlotInfo(KeySlot=0,Secured=False):
if KeySlot < 0 or KeySlot > 255:
raise apduBuilderException("invalid argument KeySlot, a value between 0 and 255 was expected, got "+str(address))
if Secured:
return ApduDefault(cla=0x84,ins=0xC4,p1=0x00,p2=KeySlot,data=[])
else:
return ApduDefault(cla=0x80,ins=0xC4,p1=0x00,p2=KeySlot,data=[])
def directTransmit(args):
"acr122 transmit data to pn532"
if len(args) < 1 or len(args) > 255:
raise apduBuilderException(
"invalid args size, must be a list from 1 to 255 item, got " +
str(len(datas)))
return ApduDefault(cla=0xFF, ins=0x00, p1=0x00, p2=0x00, data=args)
def CompatibilityWrite(datas, address=0):
if address < 0 or address > 0x0F:
raise apduBuilderException(
"invalid argument address, a value between 0 and 15 was expected, got "
+ str(address))
if len(datas) != 4:
raise apduBuilderException(
"invalid datas size, must be a list with 4 item, got " +
str(len(datas)))
datas.extend([
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00
])
return ApduMifareUltralight(ins=0xA0,
param=(address & 0xFF),
data=datas)
def nfcType1ReadSegment(address=0):
if address < 0 or address > 0xF:
raise apduBuilderException(
"invalid argument address, a value between 0 and 15 was expected, got "
+ str(address))
return ApduDefault(cla=0xFF,
ins=0x5A,
p1=0x00,
p2=((address & 0xF) << 4))
def generalAuthenticate(blockNumber, isTypeA=True, KeyIndex=0):
if blockNumber < 0 or blockNumber > 65535:
raise apduBuilderException(
"invalid argument blockNumber, a value between 0 and 65535 was expected, got "
+ str(blockNumber))
lsb = address & 0xFF
msb = (address >> 8) & 0xFF
if KeyIndex < 0 or KeyIndex > 255: #verification hasardeuse, le nombre de cle dans la doc n'est pas dis
raise apduBuilderException(
"invalid argument KeyIndex, a value between 0 and 255 was expected, got "
+ str(KeyIndex))
if isTypeA:
datas = [0x01, msb, lsb, 0x60, KeyIndex]
else:
datas = [0x01, msb, lsb, 0x61, KeyIndex]
return ApduDefault(cla=0xFF, ins=0x88, p1=0x00, p2=0x00, data=datas)
def loadKey(KeyIndex,KeyName,InVolatile = True ,isTypeA = True):
if KeyName not in keys:
raise apduBuilderException("the key name doesn't exist "+str(KeyName))
#only allow mifare key
if len(keys[KeyName]) != 6:
raise apduBuilderException("invalid key length, must be 6, got "+str(len(keys[KeyName])))
#proxnroll specific params
if InVolatile:
if KeyIndex < 0 or KeyIndex > 3:
raise apduBuilderException("invalid argument KeyIndex, a value between 0 and 3 was expected, got "+str(KeyIndex))
else:
if KeyIndex < 0 or KeyIndex > 15:
raise apduBuilderException("invalid argument KeyIndex, a value between 0 and 15 was expected, got "+str(KeyIndex))
#B key special index
if not isTypeA:
KeyIndex &= 0x10
return pcscAPDUBuilder.loadKey(KeyIndex,KeyName,InVolatile)
def loadKey(KeyName,isTypeA = True):
#TODO KeyName
if len(Key) != 6:
raise apduBuilderException("invalid key size, must be 6, got "+str(len(Key)))
if isTypeA:
P2 = 0x60
else:
P2 = 0x61
return ApduDefault(cla=0xFF,ins=0x82,p1=0x00,p2=P2,data=Key)
def nfcType3Read(ServiceCodeList,BlockCodeList):
Data = []
for s in ServiceCodeList:
if s < 0 or s > 0xFFFF:
raise apduBuilderException("invalid argument in service code list, a value between 0 and 65535 was expected, got "+str(s))
lsb = s&0xFF
msb = (s>>8)&0xFF
Data.extend([msb,lsb])
for s in BlockCodeList:
if s < 0 or s > 0xFFFF:
raise apduBuilderException("invalid argument in block code list, a value between 0 and 65535 was expected, got "+str(s))
lsb = s&0xFF
msb = (s>>8)&0xFF
Data.extend([msb,lsb])
return ApduDefault(cla=0xFF,ins=0x46,p1=len(ServiceCodes),p2=len(BlockCodes),data=Data)
def nfcType3Write(ServiceCodeList, BlockCodeList, DataList):
#check len(BlockCodeList) vs len(DataList)
if len(BlockCodeList) * 16 != len(DataList):
raise apduBuilderException(
"invalid DataList size, must be a list equals to " +
str(len(BlockCodeList) * 16) + " bytes, got " +
str(len(DataList)))
Data = []
for s in ServiceCodeList:
if s < 0 or s > 0xFFFF:
raise apduBuilderException(
"invalid argument in service code list, a value between 0 and 65535 was expected, got "
+ str(s))
lsb = s & 0xFF
msb = (s >> 8) & 0xFF
Data.extend([msb, lsb])
for s in BlockCodeList:
if s < 0 or s > 0xFFFF:
raise apduBuilderException(
"invalid argument in block code list, a value between 0 and 65535 was expected, got "
+ str(s))
lsb = s & 0xFF
msb = (s >> 8) & 0xFF
Data.extend([msb, lsb])
#append DataList
Data.extend(DataList)
return ApduDefault(cla=0xFF,
ins=0x48,
p1=len(ServiceCodes),
p2=len(BlockCodes),
data=Data)
def mifareDecrement(address, value=0):
if address < 0 or address > 65535:
raise apduBuilderException(
"invalid argument address, a value between 0 and 65535 was expected, got "
+ str(address))
if value < 0 or value > 0xffffffff:
raise apduBuilderException(
"invalid argument value, a value between 0 and " +
str(0xffffffff) + " was expected, got " + str(value))
lsb = address & 0xFF
msb = (address >> 8) & 0xFF
return ApduDefault(cla=0xFF,
ins=0xD8,
p1=msb,
p2=lsb,
data=[
value & 0xff, (value >> 8) & 0xff,
(value >> 16) & 0xff, (value >> 24) & 0xff
])
def sendCommandGenericSession(Cmd):
if len(Cmd) < 1 or len(Cmd) > 249:
raise apduBuilderException(
"invalid Cmd size, must be a list from 1 to 249 item, got " +
str(len(Cmd)))
d = [0x01, 0x00, 0xF3, 0x00, 0x00, 0x64]
d.extend(Cmd)
return ApduDefault(cla=0xFF,
ins=0xA0,
p1=0x00,
p2=0x05,
data=[0x01, 0x00, 0x02])
def loadKey(KeyName, isTypeA=True):
#TODO KeyName
if len(Key) != 6:
raise apduBuilderException("invalid key size, must be 6, got " +
str(len(Key)))
if isTypeA:
P2 = 0x60
else:
P2 = 0x61
return ApduDefault(cla=0xFF, ins=0x82, p1=0x00, p2=P2, data=Key)
def nfcType3REQC(serviceCode, RFU, TSN):
if serviceCode < 0 or serviceCode > 0xFFFF:
raise apduBuilderException(
"invalid argument serviceCode, a value between 0 and 65535 was expected, got "
+ str(serviceCode))
if RFU < 0 or RFU > 0xFF:
raise apduBuilderException(
"invalid argument RFU, a value between 0 and 255 was expected, got "
+ str(RFU))
if TSN < 0 or TSN > 0xFF:
raise apduBuilderException(
"invalid argument TSN, a value between 0 and 255 was expected, got "
+ str(TSN))
return ApduDefault(cla=0xFF,
ins=0x40,
p1=0x00,
p2=0x00,
data=[(serviceCode >> 8) & 0xFF, serviceCode & 0xFF,
RFU, TSN])
def ledAndBuzzerControl(initialRed,initialGreen,finalRed,finalGreen,T1Duration,T2Duration,Repetition,LinkToBuzzer):
"acr122 manage led and buzzer"
P2 = 0
if finalRed != None:
if finalRed:
P2 |= 0x01
P2 |= 0x04
if finalGreen != None:
if finalGreen:
P2 |= 0x02
P2 |= 0x08
if initialRed != None:
if initialRed:
P2 |= 0x10
P2 |= 0x40
if initialGreen != None:
if initialGreen:
P2 |= 0x20
P2 |= 0x80
if T1Duration < 1 or T1Duration > 255:
raise apduBuilderException("invalid argument T1Duration, must be a value between 1 and 255, got "+str(T1Duration))
if T2Duration < 1 or T2Duration > 255:
raise apduBuilderException("invalid argument T2Duration, must be a value between 1 and 255, got "+str(T2Duration))
if Repetition < 1 or Repetition > 255:
raise apduBuilderException("invalid argument Repetition, must be a value between 1 and 255, got "+str(Repetition))
if LinkToBuzzer < 0 or LinkToBuzzer > 3:
raise apduBuilderException("invalid argument LinkToBuzzer, must be a value between 0 and 4, got "+str(LinkToBuzzer))
return ApduDefault(cla=0xFF,ins=0x00,p1=0x40,p2=P2,data=[T1Duration,T2Duration,Repetition,LinkToBuzzer])
def generalAuthenticate(blockNumber,KeyIndex,InVolatile = True ,isTypeA = True):
if blockNumber < 0 or blockNumber > 255:
raise apduBuilderException("invalid argument blockNumber, a value between 0 and 255 was expected, got "+str(blockNumber))
if InVolatile:
if KeyIndex < 0 or KeyIndex > 3:
raise apduBuilderException("invalid argument KeyIndex, a value between 0 and 3 was expected, got "+str(KeyIndex))
#volatile key special index
KeyIndex &= 0x20
else:
if KeyIndex < 0 or KeyIndex > 15:
raise apduBuilderException("invalid argument KeyIndex, a value between 0 and 15 was expected, got "+str(KeyIndex))
#if isTypeA:
# datas = [0x01,0x00,blockNumber,0x60,KeyIndex]
#else:
# datas = [0x01,0x00,blockNumber,0x61,KeyIndex]
#
ap = pcscAPDUBuilder.generalAuthenticate(blockNumber,KeyIndex,InVolatile,isTypeA)
ap.setIns(0x88)
return ap
def nfcType1ReadSegment(address=0):
if address < 0 or address > 0xF:
raise apduBuilderException("invalid argument address, a value between 0 and 15 was expected, got "+str(address))
return ApduDefault(cla=0xFF,ins=0x5A,p1=0x00,p2=((address&0xF)<<4))
def readBinary(address = 0):
if address < 0 or address > 255:
raise apduBuilderException("invalid argument address, a value between 0 and 255 was expected, got "+str(address))
return ApduDefault(cla=0xFF,ins=0xB0,p1=0x00,p2=address&0xFF)
def nfcType1Read8bytes(address=0):
if address < 0 or address > 0xFF:
raise apduBuilderException("invalid argument address, a value between 0 and 255 was expected, got "+str(address))
return ApduDefault(cla=0xFF,ins=0x5C,p1=0x00,p2=address)
