def InitAVSwitch():
if getBoxType() == 'vuduo' or getBoxType().startswith('ixuss'):
config.av.yuvenabled = ConfigBoolean(default=False)
else:
config.av.yuvenabled = ConfigBoolean(default=True)
config.av.osd_alpha = ConfigSlider(
default=255, limits=(0, 255)
) # Make openATV compatible with some plugins who still use config.av.osd_alpha
colorformat_choices = {
"cvbs": _("CVBS"),
"rgb": _("RGB"),
"svideo": _("S-Video")
}
# when YUV is not enabled, don't let the user select it
if config.av.yuvenabled.value:
colorformat_choices["yuv"] = _("YPbPr")
config.av.autores = ConfigEnableDisable()
choicelist = []
for i in range(5, 16):
choicelist.append(
("%d" % i, ngettext("%d second", "%d seconds", i) % i))
config.av.autores_label_timeout = ConfigSelection(
default="5", choices=[("0", _("Not Shown"))] + choicelist)
config.av.autores_delay = ConfigSelectionNumber(min=0,
max=15000,
stepwidth=500,
default=500,
wraparound=True)
# SD - 480 / 576, standard definition
# ED - 720, enhanced definition
# HD - 1080, high definition
# Supported conversions:
# * -> 1080i60, 720p60, 480i60, 480p60
# *?50 -> 1080i50, 720p50, 576i50, 576p50
# *p25 -> 1080i50, 720p50, 576i50, 576p50 (1080p25 ?)
# *p30 -> 1080p30
# *p24 -> 1080p24
if iAVSwitch.supports1080p:
conv_60 = ["1080p", "1080i", "720p", "480p", "480i"]
conv_50 = ["1080p50", "1080i50", "720p50", "576p", "576i"] + conv_60
else:
conv_60 = ["1080i", "720p", "480p", "480i"]
conv_50 = ["1080i50", "720p50", "576p", "576i"] + conv_60
conv_30 = ["1080p30"] + conv_60
conv_24 = ["1080p24"] + conv_60
config.av.autores_sd24 = ConfigSelection(choices=conv_24)
config.av.autores_sd25 = ConfigSelection(choices=conv_50)
config.av.autores_sd30 = ConfigSelection(choices=conv_30)
config.av.autores_sd50i = ConfigSelection(choices=conv_50)
config.av.autores_sd50p = ConfigSelection(choices=conv_50)
config.av.autores_sd60i = ConfigSelection(choices=conv_60)
config.av.autores_sd60p = ConfigSelection(choices=conv_60)
config.av.autores_ed24 = ConfigSelection(choices=conv_24)
config.av.autores_ed25 = ConfigSelection(choices=conv_50)
config.av.autores_ed30 = ConfigSelection(choices=conv_30)
config.av.autores_ed50 = ConfigSelection(choices=conv_50)
config.av.autores_ed60 = ConfigSelection(choices=conv_60)
config.av.autores_hd24 = ConfigSelection(choices=conv_24)
config.av.autores_hd25 = ConfigSelection(choices=conv_50)
config.av.autores_hd30 = ConfigSelection(choices=conv_30)
config.av.autores_hd50 = ConfigSelection(choices=conv_50)
config.av.autores_hd60 = ConfigSelection(choices=conv_60)
# some boxes do not support YPbPr
try:
config.av.colorformat = ConfigSelection(choices=colorformat_choices,
default="yuv")
except:
config.av.colorformat = ConfigSelection(choices=colorformat_choices,
default="cvbs")
config.av.aspectratio = ConfigSelection(choices={
"4_3_letterbox":
_("4:3 Letterbox"),
"4_3_panscan":
_("4:3 PanScan"),
"16_9":
_("16:9"),
"16_9_always":
_("16:9 always"),
"16_10_letterbox":
_("16:10 Letterbox"),
"16_10_panscan":
_("16:10 PanScan"),
"16_9_letterbox":
_("16:9 Letterbox")
},
default="16_9")
config.av.aspect = ConfigSelection(choices={
"4:3": _("4:3"),
"16:9": _("16:9"),
"16:10": _("16:10"),
"auto": _("Automatic")
},
default="16:9")
policy2_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term.
"letterbox": _("Letterbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"panscan": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect)
"scale": _("Just scale")
}
if os.path.exists("/proc/stb/video/policy2_choices"):
f = open("/proc/stb/video/policy2_choices")
if "auto" in f.readline():
# TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect.
policy2_choices.update({"auto": _("Auto")})
f.close()
config.av.policy_169 = ConfigSelection(choices=policy2_choices,
default="letterbox")
policy_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term.
"panscan": _("Pillarbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"letterbox": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right)
# "nonlinear": _("Nonlinear"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect)
"bestfit": _("Just scale")
}
if os.path.exists("/proc/stb/video/policy_choices"):
f = open("/proc/stb/video/policy_choices")
if "auto" in f.readline():
# TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect.
policy_choices.update({"auto": _("Auto")})
f.close()
config.av.policy_43 = ConfigSelection(choices=policy_choices,
default="panscan")
config.av.tvsystem = ConfigSelection(choices={
"pal": _("PAL"),
"ntsc": _("NTSC"),
"multinorm": _("multinorm")
},
default="pal")
config.av.wss = ConfigEnableDisable(default=True)
config.av.generalAC3delay = ConfigSelectionNumber(-1000,
1000,
5,
default=0)
config.av.generalPCMdelay = ConfigSelectionNumber(-1000,
1000,
5,
default=0)
config.av.vcrswitch = ConfigEnableDisable(default=False)
# config.av.aspect.setValue('16:9')
config.av.aspect.addNotifier(iAVSwitch.setAspect)
config.av.wss.addNotifier(iAVSwitch.setWss)
config.av.policy_43.addNotifier(iAVSwitch.setPolicy43)
config.av.policy_169.addNotifier(iAVSwitch.setPolicy169)
def setColorFormat(configElement):
if config.av.videoport and config.av.videoport.value in (
"YPbPr", "Scart-YPbPr"):
iAVSwitch.setColorFormat(3)
elif config.av.videoport and config.av.videoport.value == "YPbPr" or getMachineBuild(
) == 'inihdx':
iAVSwitch.setColorFormat(3)
else:
if getBoxType() == 'et6x00':
colmap = {"cvbs": 3, "rgb": 3, "svideo": 2, "yuv": 3}
elif getBoxType() == 'gbquad' or getBoxType(
) == 'gbquadplus' or getBoxType().startswith('et'):
colmap = {"cvbs": 0, "rgb": 3, "svideo": 2, "yuv": 3}
else:
colmap = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3}
iAVSwitch.setColorFormat(colmap[configElement.value])
config.av.colorformat.addNotifier(setColorFormat)
def setAspectRatio(configElement):
iAVSwitch.setAspectRatio({
"4_3_letterbox": 0,
"4_3_panscan": 1,
"16_9": 2,
"16_9_always": 3,
"16_10_letterbox": 4,
"16_10_panscan": 5,
"16_9_letterbox": 6
}[configElement.value])
iAVSwitch.setInput("ENCODER") # init on startup
if (getBoxType() in ('gbquad', 'gbquadplus', 'et5x00', 'ixussone',
'ixusszero', 'axodin', 'axodinc', 'starsatlx',
'geniuse3hd', 'evoe3hd', 'axase3', 'axase3c',
'omtimussos1', 'omtimussos2', 'gb800seplus',
'gb800ueplus')) or about.getModelString() == 'et6000':
detected = False
else:
detected = eAVSwitch.getInstance().haveScartSwitch()
SystemInfo["ScartSwitch"] = detected
if os.path.exists("/proc/stb/hdmi/bypass_edid_checking"):
f = open("/proc/stb/hdmi/bypass_edid_checking", "r")
can_edidchecking = f.read().strip().split(" ")
f.close()
else:
can_edidchecking = False
SystemInfo["Canedidchecking"] = can_edidchecking
if can_edidchecking:
def setEDIDBypass(configElement):
try:
f = open("/proc/stb/hdmi/bypass_edid_checking", "w")
f.write(configElement.value)
f.close()
except:
pass
if about.getChipSetString() in ('7111'):
config.av.bypass_edid_checking = ConfigSelection(
choices={
"00000000": _("off"),
"00000001": _("on")
},
default="00000001")
else:
config.av.bypass_edid_checking = ConfigSelection(
choices={
"00000000": _("off"),
"00000001": _("on")
},
default="00000000")
config.av.bypass_edid_checking.addNotifier(setEDIDBypass)
else:
config.av.bypass_edid_checking = ConfigNothing()
if os.path.exists("/proc/stb/audio/3d_surround_choices"):
f = open("/proc/stb/audio/3d_surround_choices", "r")
can_3dsurround = f.read().strip().split(" ")
f.close()
else:
can_3dsurround = False
SystemInfo["Can3DSurround"] = can_3dsurround
if can_3dsurround:
def set3DSurround(configElement):
f = open("/proc/stb/audio/3d_surround", "w")
f.write(configElement.value)
f.close()
choice_list = [("none", _("off")), ("hdmi", _("HDMI")),
("spdif", _("SPDIF")), ("dac", _("DAC"))]
config.av.surround_3d = ConfigSelection(choices=choice_list,
default="none")
config.av.surround_3d.addNotifier(set3DSurround)
else:
config.av.surround_3d = ConfigNothing()
if os.path.exists("/proc/stb/audio/3d_surround_speaker_position_choices"):
f = open("/proc/stb/audio/3d_surround_speaker_position_choices", "r")
can_3dsurround_speaker = f.read().strip().split(" ")
f.close()
else:
can_3dsurround_speaker = False
SystemInfo["Can3DSpeaker"] = can_3dsurround_speaker
if can_3dsurround_speaker:
def set3DSurroundSpeaker(configElement):
f = open("/proc/stb/audio/3d_surround_speaker_position", "w")
f.write(configElement.value)
f.close()
choice_list = [("center", _("center")), ("wide", _("wide")),
("extrawide", _("extra wide"))]
config.av.surround_3d_speaker = ConfigSelection(choices=choice_list,
default="center")
config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker)
else:
config.av.surround_3d_speaker = ConfigNothing()
if os.path.exists("/proc/stb/audio/avl_choices"):
f = open("/proc/stb/audio/avl_choices", "r")
can_autovolume = f.read().strip().split(" ")
f.close()
else:
can_autovolume = False
SystemInfo["CanAutoVolume"] = can_autovolume
if can_autovolume:
def setAutoVolume(configElement):
f = open("/proc/stb/audio/avl", "w")
f.write(configElement.value)
f.close()
choice_list = [("none", _("off")), ("hdmi", _("HDMI")),
("spdif", _("SPDIF")), ("dac", _("DAC"))]
config.av.autovolume = ConfigSelection(choices=choice_list,
default="none")
config.av.autovolume.addNotifier(setAutoVolume)
else:
config.av.autovolume = ConfigNothing()
try:
can_pcm_multichannel = os.access("/proc/stb/audio/multichannel_pcm",
os.W_OK)
except:
can_pcm_multichannel = False
SystemInfo["supportPcmMultichannel"] = can_pcm_multichannel
if can_pcm_multichannel:
def setPCMMultichannel(configElement):
open("/proc/stb/audio/multichannel_pcm",
"w").write(configElement.value and "enable" or "disable")
config.av.pcm_multichannel = ConfigYesNo(default=False)
config.av.pcm_multichannel.addNotifier(setPCMMultichannel)
try:
f = open("/proc/stb/audio/ac3_choices", "r")
choices = f.read().strip()
f.close()
can_downmix_ac3 = "downmix" in choices
except:
can_downmix_ac3 = False
SystemInfo["CanDownmixAC3"] = can_downmix_ac3
if can_downmix_ac3:
def setAC3Downmix(configElement):
f = open("/proc/stb/audio/ac3", "w")
print "[AVSwitch] setting AC3 to %s" % configElement.value and "downmix" or "passthrough"
f.write(configElement.value and "downmix" or "passthrough")
f.close()
if SystemInfo.get("supportPcmMultichannel",
False) and not configElement.value:
SystemInfo["CanPcmMultichannel"] = True
else:
SystemInfo["CanPcmMultichannel"] = False
if can_pcm_multichannel:
config.av.pcm_multichannel.setValue(False)
config.av.downmix_ac3 = ConfigYesNo(default=True)
config.av.downmix_ac3.addNotifier(setAC3Downmix)
try:
f = open("/proc/stb/audio/aac_choices", "r")
choices = f.read().strip()
f.close()
can_downmix_aac = "downmix" in choices
except:
can_downmix_aac = False
SystemInfo["CanDownmixAAC"] = can_downmix_aac
if can_downmix_aac:
def setAACDownmix(configElement):
f = open("/proc/stb/audio/aac", "w")
print "[AVSwitch] setting AAC to %s" % configElement.value and "downmix" or "passthrough"
f.write(configElement.value and "downmix" or "passthrough")
f.close()
config.av.downmix_aac = ConfigYesNo(default=True)
config.av.downmix_aac.addNotifier(setAACDownmix)
if os.path.exists("/proc/stb/audio/aac_transcode_choices"):
f = open("/proc/stb/audio/aac_transcode_choices", "r")
can_aactranscode = f.read().strip().split(" ")
f.close()
else:
can_aactranscode = False
SystemInfo["CanAACTranscode"] = can_aactranscode
if can_aactranscode:
def setAACTranscode(configElement):
f = open("/proc/stb/audio/aac_transcode", "w")
f.write(configElement.value)
f.close()
choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))]
config.av.transcodeaac = ConfigSelection(choices=choice_list,
default="off")
config.av.transcodeaac.addNotifier(setAACTranscode)
else:
config.av.transcodeaac = ConfigNothing()
if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"):
def setScaler_sharpness(config):
myval = int(config.value)
try:
print "[VideoMode] setting scaler_sharpness to: %0.8X" % myval
f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w")
f.write("%0.8X" % myval)
f.close()
f = open("/proc/stb/vmpeg/0/pep_apply", "w")
f.write("1")
f.close()
except IOError:
print "couldn't write pep_scaler_sharpness"
if getBoxType() in ('gbquad', 'gbquadplus'):
config.av.scaler_sharpness = ConfigSlider(default=5,
limits=(0, 26))
else:
config.av.scaler_sharpness = ConfigSlider(default=13,
limits=(0, 26))
config.av.scaler_sharpness.addNotifier(setScaler_sharpness)
else:
config.av.scaler_sharpness = NoSave(ConfigNothing())
config.av.edid_override = ConfigYesNo(default=False)
iAVSwitch.setConfiguredMode()
def InitAVSwitch():
config.av = ConfigSubsection()
config.av.yuvenabled = ConfigBoolean(default=False)
colorformat_choices = {
"cvbs": _("CVBS"),
"rgb": _("RGB"),
"svideo": _("S-Video")
}
# when YUV is not enabled, don't let the user select it
if config.av.yuvenabled.value:
colorformat_choices["yuv"] = _("YPbPr")
config.av.colorformat = ConfigSelection(choices=colorformat_choices,
default="cvbs")
config.av.aspectratio = ConfigSelection(choices={
"4_3_letterbox":
_("4:3 Letterbox"),
"4_3_panscan":
_("4:3 PanScan"),
"16_9":
_("16:9"),
"16_9_always":
_("16:9 always"),
"16_10_letterbox":
_("16:10 Letterbox"),
"16_10_panscan":
_("16:10 PanScan"),
"16_9_letterbox":
_("16:9 Letterbox")
},
default="4_3_letterbox")
config.av.aspect = ConfigSelection(choices={
"4_3": _("4:3"),
"16_9": _("16:9"),
"16_10": _("16:10"),
"auto": _("Automatic")
},
default="auto")
config.av.policy_169 = ConfigSelection(
choices={
# TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term.
"letterbox": _("Letterbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"panscan": _("Pan&Scan"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect)
"scale": _("Just Scale")
},
default="letterbox")
config.av.policy_43 = ConfigSelection(
choices={
# TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term.
"pillarbox": _("Pillarbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"panscan": _("Pan&Scan"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right)
"nonlinear": _("Nonlinear"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect)
"scale": _("Just Scale")
},
default="pillarbox")
config.av.tvsystem = ConfigSelection(choices={
"pal": _("PAL"),
"ntsc": _("NTSC"),
"multinorm": _("multinorm")
},
default="pal")
config.av.wss = ConfigEnableDisable(default=True)
config.av.defaultac3 = ConfigYesNo(default=False)
config.av.generalAC3delay = ConfigSelectionNumber(-1000,
1000,
25,
default=0)
config.av.generalPCMdelay = ConfigSelectionNumber(-1000,
1000,
25,
default=0)
config.av.vcrswitch = ConfigEnableDisable(default=False)
iAVSwitch = AVSwitch()
def setColorFormat(configElement):
map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3}
iAVSwitch.setColorFormat(map[configElement.value])
def setAspectRatio(configElement):
map = {
"4_3_letterbox": 0,
"4_3_panscan": 1,
"16_9": 2,
"16_9_always": 3,
"16_10_letterbox": 4,
"16_10_panscan": 5,
"16_9_letterbox": 6
}
iAVSwitch.setAspectRatio(map[configElement.value])
def setSystem(configElement):
map = {"pal": 0, "ntsc": 1, "multinorm": 2}
iAVSwitch.setSystem(map[configElement.value])
def setWSS(configElement):
iAVSwitch.setAspectWSS()
# this will call the "setup-val" initial
config.av.colorformat.addNotifier(setColorFormat)
config.av.aspectratio.addNotifier(setAspectRatio)
config.av.tvsystem.addNotifier(setSystem)
config.av.wss.addNotifier(setWSS)
iAVSwitch.setInput("ENCODER") # init on startup
SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch()
config.av.bypass_edid_checking = ConfigSelection(choices={
"00000000": _("off"),
"00000001": _("on")
},
default="00000000")
def setEDIDBypass(configElement):
f = open("/proc/stb/hdmi/bypass_edid_checking", "w")
f.write(configElement.value)
f.close()
config.av.bypass_edid_checking.addNotifier(setEDIDBypass)
can_pcm_multichannel = False
if SystemInfo["CanMultiChannelPCM"]:
config.av.multichannel_pcm = ConfigYesNo(default=False)
can_pcm_multichannel = True
if config.av.multichannel_pcm.value:
try:
can_pcm_multichannel = access(
"/proc/stb/audio/multichannel_pcm", W_OK) and True or False
except:
can_pcm_multichannel = False
SystemInfo["supportMultiChannelPCM"] = can_pcm_multichannel
can_speaker_position = False
if os_path.exists("/proc/stb/audio/3d_surround_speaker_position_choices"):
can_speaker_position = True
SystemInfo["supportSpeakerPosition"] = can_speaker_position
if SystemInfo["CanSpeakerPosition"]:
choice_list = [("center", _("center")), ("wide", _("wide")),
("extrawide", _("extrawide"))]
config.av.surround_speaker_position = ConfigSelection(
choices=choice_list, default="wide")
if SystemInfo["Can3DSurround"]:
def set3DSurround(configElement):
f = open("/proc/stb/audio/3d_surround", "w")
f.write(configElement.value)
f.close()
if SystemInfo[
"supportSpeakerPosition"] and config.av.surround_3d.value == "none":
config.av.surround_speaker_position.value = "wide"
config.av.surround_speaker_position.save()
SystemInfo["CanSpeakerPosition"] = False
elif SystemInfo[
"supportSpeakerPosition"] and config.av.surround_3d.value != "none":
SystemInfo["CanSpeakerPosition"] = True
choice_list = [("none", _("off")), ("hdmi", _("HDMI")),
("spdif", _("SPDIF")), ("dac", _("DAC"))]
config.av.surround_3d = ConfigSelection(choices=choice_list,
default="none")
config.av.surround_3d.addNotifier(set3DSurround)
if SystemInfo["supportSpeakerPosition"]:
def setSpeakerPosition(configElement):
f = open("/proc/stb/audio/3d_surround_speaker_position", "w")
f.write(configElement.value)
f.close()
config.av.surround_speaker_position.addNotifier(setSpeakerPosition)
if SystemInfo["CanAVL"]:
def setAVL(configElement):
f = open("/proc/stb/audio/avl", "w")
f.write(configElement.value)
f.close()
choice_list = [("none", _("off")), ("hdmi", _("HDMI")),
("spdif", _("SPDIF")), ("dac", _("DAC"))]
config.av.avl = ConfigSelection(choices=choice_list, default="none")
config.av.avl.addNotifier(setAVL)
if SystemInfo["CanDownmixAC3"]:
def setAC3Downmix(configElement):
open("/proc/stb/audio/ac3",
"w").write(configElement.value and "downmix" or "passthrough")
if SystemInfo["supportMultiChannelPCM"] and (
not config.av.downmix_ac3.value):
SystemInfo["CanMultiChannelPCM"] = True
elif SystemInfo[
"supportMultiChannelPCM"] and config.av.downmix_ac3.value:
SystemInfo["CanMultiChannelPCM"] = False
config.av.multichannel_pcm.value = False
config.av.multichannel_pcm.save()
config.av.downmix_ac3 = ConfigYesNo(default=True)
config.av.downmix_ac3.addNotifier(setAC3Downmix)
if SystemInfo["CanDownmixAAC"]:
def setAACDownmix(configElement):
open("/proc/stb/audio/aac",
"w").write(configElement.value and "downmix" or "passthrough")
config.av.downmix_aac = ConfigYesNo(default=True)
config.av.downmix_aac.addNotifier(setAACDownmix)
def setMultiChannelPCM(configElement):
open("/proc/stb/audio/multichannel_pcm",
"w").write(configElement.value and "enable" or "disable")
if SystemInfo["supportMultiChannelPCM"]:
config.av.multichannel_pcm.addNotifier(
setMultiChannelPCM, initial_call=config.av.multichannel_pcm.value)
try:
can_osd_alpha = open("/proc/stb/video/alpha", "r") and True or False
except:
can_osd_alpha = False
SystemInfo["CanChangeOsdAlpha"] = can_osd_alpha
def setAlpha(config):
open("/proc/stb/video/alpha", "w").write(str(config.value))
if can_osd_alpha:
config.av.osd_alpha = ConfigSlider(default=255, limits=(0, 255))
config.av.osd_alpha.addNotifier(setAlpha)
if os_path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"):
def setScaler_sharpness(config):
myval = int(config.value)
try:
print "--> setting scaler_sharpness to: %0.8X" % myval
open("/proc/stb/vmpeg/0/pep_scaler_sharpness",
"w").write("%0.8X" % myval)
open("/proc/stb/vmpeg/0/pep_apply", "w").write("1")
except IOError:
print "couldn't write pep_scaler_sharpness"
config.av.scaler_sharpness = ConfigSlider(default=0, limits=(0, 26))
config.av.scaler_sharpness.addNotifier(setScaler_sharpness)
else:
config.av.scaler_sharpness = NoSave(ConfigNothing())
def InitAVSwitch():
if getBoxType() == 'vuduo' or getBoxType().startswith('ixuss'):
config.av.yuvenabled = ConfigBoolean(default=False)
else:
config.av.yuvenabled = ConfigBoolean(default=True)
config.av.osd_alpha = ConfigSlider(default=255, increment = 5, limits=(20,255)) # Make openHDF compatible with some plugins who still use config.av.osd_alpha
colorformat_choices = {"cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video")}
# when YUV is not enabled, don't let the user select it
if config.av.yuvenabled.value:
colorformat_choices["yuv"] = _("YPbPr")
config.av.autores = ConfigSelection(choices={"disabled": _("Disabled"), "simple": _("Simple"), "native": _("Native"), "all": _("All resolutions"), "hd": _("only HD")}, default="disabled")
config.av.autores_preview = NoSave(ConfigYesNo(default=False))
config.av.autores_1080i_deinterlace = ConfigYesNo(default=False)
choicelist = {
"24,24": _("24p/24p"),
"24,25": _("24p/25p"),
"24,30": _("24p/30p"),
"24,50": _("24p/50p"),
"24,60": _("24p/60p"),
"25,24": _("25p/24p"),
"30,24": _("30p/24p"),
"50,24": _("50p/24p"),
"60,24": _("60p/24p"),
"25,25": _("25p/25p"),
"25,30": _("25p/30p"),
"25,50": _("25p/50p"),
"25,60": _("25p/60p"),
"30,25": _("30p/25p"),
"50,25": _("50p/25p"),
"60,25": _("60p/25p"),
"30,30": _("30p/30p"),
"30,50": _("30p/50p"),
"30,60": _("30p/60p"),
"50,30": _("50p/30p"),
"60,30": _("60p/30p"),
"50,50": _("50p/50p"),
"50,60": _("50p/60p"),
"60,50": _("60p/50p"),
"60,60": _("60p/60p")
} # first value <=720p , second value > 720p
config.av.autores_24p = ConfigSelection(choices=choicelist, default="50,24")
config.av.autores_25p = ConfigSelection(choices=choicelist, default="50,25")
config.av.autores_30p = ConfigSelection(choices=choicelist, default="60,30")
config.av.autores_unknownres = ConfigSelection(choices={"next": _("next higher Resolution"), "highest": _("highest Resolution")}, default="next")
choicelist = []
for i in range(5, 16):
choicelist.append(("%d" % i, ngettext("%d second", "%d seconds", i) % i))
config.av.autores_label_timeout = ConfigSelection(default = "5", choices = [("0", _("Not Shown"))] + choicelist)
config.av.autores_delay = ConfigSelectionNumber(min = 0, max = 3000, stepwidth = 50, default = 400, wraparound = True)
config.av.autores_deinterlace = ConfigYesNo(default=False)
config.av.autores_sd = ConfigSelection(choices={"720p50": _("720p50"), "720p": _("720p"), "1080i50": _("1080i50"), "1080i": _("1080i")}, default="720p50")
config.av.autores_480p24 = ConfigSelection(choices={"480p24": _("480p 24Hz"), "720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz")}, default="1080p24")
config.av.autores_720p24 = ConfigSelection(choices={"720p24": _("720p 24Hz"), "1080p24": _("1080p 24Hz"), "1080i50": _("1080i 50Hz"), "1080i": _("1080i 60Hz")}, default="720p24")
config.av.autores_1080p24 = ConfigSelection(choices={"1080p24": _("1080p 24Hz"), "1080p25": _("1080p 25Hz"), "1080i50": _("1080p 50Hz"), "1080i": _("1080i 60Hz")}, default="1080p24")
config.av.autores_1080p25 = ConfigSelection(choices={"1080p25": _("1080p 25Hz"), "1080p50": _("1080p 50Hz"), "1080i50": _("1080i 50Hz")}, default="1080p25")
config.av.autores_1080p30 = ConfigSelection(choices={"1080p30": _("1080p 30Hz"), "1080p60": _("1080p 60Hz"), "1080i": _("1080i 60Hz")}, default="1080p30")
config.av.autores_2160p24 = ConfigSelection(choices={"2160p24": _("2160p 24Hz"), "2160p25": _("2160p 25Hz"), "2160p30": _("2160p 30Hz")}, default="2160p24")
config.av.autores_2160p25 = ConfigSelection(choices={"2160p25": _("2160p 25Hz"), "2160p50": _("2160p 50Hz")}, default="2160p25")
config.av.autores_2160p30 = ConfigSelection(choices={"2160p30": _("2160p 30Hz"), "2160p60": _("2160p 60Hz")}, default="2160p30")
config.av.smart1080p = ConfigSelection(choices={"false": _("off"), "true": _("1080p50: 24p/50p/60p"), "2160p50": _("2160p50: 24p/50p/60p"), "1080i50": _("1080i50: 24p/50i/60i"), "720p50": _("720p50: 24p/50p/60p")}, default="false")
config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb")
config.av.aspectratio = ConfigSelection(choices={
"4_3_letterbox": _("4:3 Letterbox"),
"4_3_panscan": _("4:3 PanScan"),
"16_9": _("16:9"),
"16_9_always": _("16:9 always"),
"16_10_letterbox": _("16:10 Letterbox"),
"16_10_panscan": _("16:10 PanScan"),
"16_9_letterbox": _("16:9 Letterbox")},
default = "16_9")
config.av.aspect = ConfigSelection(choices={
"4:3": _("4:3"),
"16:9": _("16:9"),
"16:10": _("16:10"),
"auto": _("Automatic")},
default = "16:9")
# Some boxes have a redundant proc entry for policy2 choices, but some don't (The choices are from a 16:9 point of view anyways)
if os.path.exists("/proc/stb/video/policy2_choices"):
policy2_choices_proc="/proc/stb/video/policy2_choices"
else:
policy2_choices_proc="/proc/stb/video/policy_choices"
try:
policy2_choices_raw=open(policy2_choices_proc, "r").read()
except:
policy2_choices_raw="letterbox"
policy2_choices = {}
if "letterbox" in policy2_choices_raw:
# TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term.
policy2_choices.update({"letterbox": _("Letterbox")})
if "panscan" in policy2_choices_raw:
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
policy2_choices.update({"panscan": _("Pan&scan")})
if "nonliner" in policy2_choices_raw and not "nonlinear" in policy2_choices_raw:
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the top/bottom (Center of picture maintains aspect, top/bottom lose aspect heaver than on linear stretch))
policy2_choices.update({"nonliner": _("Stretch nonlinear")})
if "nonlinear" in policy2_choices_raw:
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the top/bottom (Center of picture maintains aspect, top/bottom lose aspect heaver than on linear stretch))
policy2_choices.update({"nonlinear": _("Stretch nonlinear")})
if "scale" in policy2_choices_raw and not "auto" in policy2_choices_raw and not "bestfit" in policy2_choices_raw:
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect))
policy2_choices.update({"scale": _("Stretch linear")})
if "full" in policy2_choices_raw:
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (force aspect))
policy2_choices.update({"full": _("Stretch full")})
if "auto" in policy2_choices_raw and not "bestfit" in policy2_choices_raw:
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect))
policy2_choices.update({"auto": _("Stretch linear")})
if "bestfit" in policy2_choices_raw:
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect))
policy2_choices.update({"bestfit": _("Stretch linear")})
config.av.policy_169 = ConfigSelection(choices=policy2_choices, default = "letterbox")
policy_choices_proc="/proc/stb/video/policy_choices"
try:
policy_choices_raw=open(policy_choices_proc, "r").read()
except:
policy_choices_raw="panscan"
policy_choices = {}
if "pillarbox" in policy_choices_raw and not "panscan" in policy_choices_raw:
# Very few boxes support "pillarbox" as an alias for "panscan" (Which in fact does pillarbox)
# So only add "pillarbox" if "panscan" is not listed in choices
# TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term.
policy_choices.update({"pillarbox": _("Pillarbox")})
if "panscan" in policy_choices_raw:
# DRIVER BUG: "panscan" in /proc actually does "pillarbox" (That's probably why an alias to it named "pillarbox" existed)!
# Interpret "panscan" setting with a "Pillarbox" text in order to show the correct value in GUI
# TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term.
policy_choices.update({"panscan": _("Pillarbox")})
if "letterbox" in policy_choices_raw:
# DRIVER BUG: "letterbox" in /proc actually does pan&scan
# "letterbox" and 4:3 content on 16:9 TVs is mutually exclusive, as "letterbox" is the method to show wide content on narrow TVs
# Probably the bug arose as the driver actually does the same here as it would for wide content on narrow TVs (It stretches the picture to fit width)
# TRANSLATORS: (aspect ratio policy: Fit width, cut/crop top and bottom (Maintain aspect ratio))
policy_choices.update({"letterbox": _("Pan&scan")})
if "nonliner" in policy_choices_raw and not "nonlinear" in policy_choices_raw:
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right (Center 50% of picture maintain aspect, left/right 25% lose aspect heaver than on linear stretch))
policy_choices.update({"nonliner": _("Stretch nonlinear")})
if "nonlinear" in policy_choices_raw:
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right (Center 50% of picture maintain aspect, left/right 25% lose aspect heaver than on linear stretch))
policy_choices.update({"nonlinear": _("Stretch nonlinear")})
# "auto", "bestfit" and "scale" are aliasses for the same: Stretch linear
if "scale" in policy_choices_raw and not "auto" in policy_choices_raw and not "bestfit" in policy_choices_raw:
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect))
policy_choices.update({"scale": _("Stretch linear")})
if "full" in policy_choices_raw:
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (force aspect))
policy_choices.update({"full": _("Stretch full")})
if "auto" in policy_choices_raw and not "bestfit" in policy_choices_raw:
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect))
policy_choices.update({"auto": _("Stretch linear")})
if "bestfit" in policy_choices_raw:
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching all parts of the picture with the same factor (All parts lose aspect))
policy_choices.update({"bestfit": _("Stretch linear")})
config.av.policy_43 = ConfigSelection(choices=policy_choices, default = "panscan")
config.av.tvsystem = ConfigSelection(choices = {"pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm")}, default="pal")
config.av.wss = ConfigEnableDisable(default = True)
config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default = 0)
config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default = 0)
config.av.vcrswitch = ConfigEnableDisable(default = False)
#config.av.aspect.setValue('16:9')
config.av.aspect.addNotifier(iAVSwitch.setAspect)
config.av.wss.addNotifier(iAVSwitch.setWss)
config.av.policy_43.addNotifier(iAVSwitch.setPolicy43)
config.av.policy_169.addNotifier(iAVSwitch.setPolicy169)
def setColorFormat(configElement):
if config.av.videoport and config.av.videoport.value in ("YPbPr", "Scart-YPbPr"):
iAVSwitch.setColorFormat(3)
elif config.av.videoport and config.av.videoport.value in ("RCA"):
iAVSwitch.setColorFormat(0)
else:
if getBoxType() == 'et6x00':
map = {"cvbs": 3, "rgb": 3, "svideo": 2, "yuv": 3}
elif getBoxType() == 'gbquad' or getBoxType() == 'gbquadplus' or getBoxType().startswith('et'):
map = {"cvbs": 0, "rgb": 3, "svideo": 2, "yuv": 3}
else:
map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3}
iAVSwitch.setColorFormat(map[configElement.value])
config.av.colorformat.addNotifier(setColorFormat)
def setAspectRatio(configElement):
map = {"4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox" : 6}
iAVSwitch.setAspectRatio(map[configElement.value])
iAVSwitch.setInput("ENCODER") # init on startup
if (getBoxType() in ('gbquad', 'gbquadplus', 'et5x00', 'ixussone', 'ixusszero', 'axodin', 'axodinc', 'starsatlx', 'galaxym6', 'geniuse3hd', 'evoe3hd', 'axase3', 'axase3c', 'omtimussos1', 'omtimussos2', 'gb800seplus', 'gb800ueplus', 'gbultrase', 'gbultraue', 'gbultraueh' , 'twinboxlcd' )) or about.getModelString() == 'et6000':
detected = False
else:
detected = eAVSwitch.getInstance().haveScartSwitch()
SystemInfo["ScartSwitch"] = detected
if os.path.exists("/proc/stb/hdmi/bypass_edid_checking"):
f = open("/proc/stb/hdmi/bypass_edid_checking", "r")
can_edidchecking = f.read().strip().split(" ")
f.close()
else:
can_edidchecking = False
SystemInfo["Canedidchecking"] = can_edidchecking
if can_edidchecking:
def setEDIDBypass(configElement):
try:
f = open("/proc/stb/hdmi/bypass_edid_checking", "w")
if configElement.value:
f.write("00000001")
else:
f.write("00000000")
f.close()
except:
pass
config.av.bypass_edid_checking = ConfigYesNo(default=True)
config.av.bypass_edid_checking.addNotifier(setEDIDBypass)
else:
config.av.bypass_edid_checking = ConfigNothing()
def setUnsupportModes(configElement):
iAVSwitch.readPreferredModes()
iAVSwitch.createConfig()
config.av.edid_override.addNotifier(setUnsupportModes)
if os.path.exists("/proc/stb/video/hdmi_colorspace"):
f = open("/proc/stb/video/hdmi_colorspace", "r")
have_colorspace = f.read().strip().split(" ")
f.close()
else:
have_colorspace = False
SystemInfo["havecolorspace"] = have_colorspace
if have_colorspace:
def setHDMIColorspace(configElement):
try:
f = open("/proc/stb/video/hdmi_colorspace", "w")
f.write(configElement.value)
f.close()
except:
pass
if getBoxType() in ('vusolo4k','vuuno4k','vuuno4kse','vuultimo4k'):
config.av.hdmicolorspace = ConfigSelection(choices={
"Edid(Auto)": _("Auto"),
"Hdmi_Rgb": _("RGB"),
"444": _("YCbCr444"),
"422": _("YCbCr422"),
"420": _("YCbCr420")},
default = "Edid(Auto)")
elif getBoxType() in ('dm900','dm920','vuzero4k'):
config.av.hdmicolorspace = ConfigSelection(choices={
"Edid(Auto)": _("Auto"),
"Hdmi_Rgb": _("RGB"),
"Itu_R_BT_709": _("BT709"),
"DVI_Full_Range_RGB": _("Full Range RGB"),
"FCC": _("FCC 1953"),
"Itu_R_BT_470_2_BG": _("BT470 BG"),
"Smpte_170M": _("Smpte 170M"),
"Smpte_240M": _("Smpte 240M"),
"Itu_R_BT_2020_NCL": _("BT2020 NCL"),
"Itu_R_BT_2020_CL": _("BT2020 CL"),
"XvYCC_709": _("BT709 XvYCC"),
"XvYCC_601": _("BT601 XvYCC")},
default = "Edid(Auto)")
else:
config.av.hdmicolorspace = ConfigSelection(choices={
"auto": _("auto"),
"rgb": _("rgb"),
"420": _("420"),
"422": _("422"),
"444": _("444")},
default = "auto")
config.av.hdmicolorspace.addNotifier(setHDMIColorspace)
else:
config.av.hdmicolorspace = ConfigNothing()
if os.path.exists("/proc/stb/video/hdmi_colorimetry"):
f = open("/proc/stb/video/hdmi_colorimetry", "r")
have_colorimetry = f.read().strip().split(" ")
f.close()
else:
have_colorimetry = False
SystemInfo["havecolorimetry"] = have_colorimetry
if have_colorimetry:
def setHDMIColorimetry(configElement):
sleep(0.1)
try:
f = open("/proc/stb/video/hdmi_colorimetry", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.hdmicolorimetry = ConfigSelection(choices={
"auto": _("auto"),
"bt2020ncl": _("BT 2020 NCL"),
"bt2020cl": _("BT 2020 CL"),
"bt709": _("BT 709")},
default = "auto")
config.av.hdmicolorimetry.addNotifier(setHDMIColorimetry)
else:
config.av.hdmicolorimetry = ConfigNothing()
if os.path.exists("/proc/stb/info/boxmode"):
f = open("/proc/stb/info/boxmode", "r")
have_boxmode = f.read().strip().split(" ")
f.close()
else:
have_boxmode = False
SystemInfo["haveboxmode"] = have_boxmode
if have_boxmode:
def setBoxmode(configElement):
try:
f = open("/proc/stb/info/boxmode", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.boxmode = ConfigSelection(choices={
"12": _("enable PIP no HDR"),
"1": _("12bit 4:2:0/4:2:2 no PIP")},
default = "12")
config.av.boxmode.addNotifier(setBoxmode)
else:
config.av.boxmode = ConfigNothing()
if os.path.exists("/proc/stb/video/hdmi_colordepth"):
f = open("/proc/stb/video/hdmi_colordepth", "r")
have_HdmiColordepth = f.read().strip().split(" ")
f.close()
else:
have_HdmiColordepth = False
SystemInfo["havehdmicolordepth"] = have_HdmiColordepth
if have_HdmiColordepth:
def setHdmiColordepth(configElement):
try:
f = open("/proc/stb/video/hdmi_colordepth", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.hdmicolordepth = ConfigSelection(choices={
"auto": _("Auto"),
"8bit": _("8bit"),
"10bit": _("10bit"),
"12bit": _("12bit")},
default = "auto")
config.av.hdmicolordepth.addNotifier(setHdmiColordepth)
else:
config.av.hdmicolordepth = ConfigNothing()
if os.path.exists("/proc/stb/video/hdmi_hdrtype"):
f = open("/proc/stb/video/hdmi_hdrtype", "r")
have_HdmiHdrType = f.read().strip().split(" ")
f.close()
else:
have_HdmiHdrType = False
SystemInfo["havehdmihdrtype"] = have_HdmiHdrType
if have_HdmiHdrType:
def setHdmiHdrType(configElement):
try:
f = open("/proc/stb/video/hdmi_hdrtype", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.hdmihdrtype = ConfigSelection(choices={
"auto": _("Auto"),
"dolby": _("dolby"),
"none": _("sdr"),
"hdr10": _("hdr10"),
"hlg": _("hlg")},
default = "auto")
config.av.hdmihdrtype.addNotifier(setHdmiHdrType)
else:
config.av.hdmihdrtype = ConfigNothing()
if os.path.exists("/proc/stb/hdmi/hlg_support_choices"):
f = open("/proc/stb/hdmi/hlg_support_choices", "r")
have_HDRSupport = f.read().strip().split(" ")
f.close()
else:
have_HDRSupport = False
SystemInfo["HDRSupport"] = have_HDRSupport
if have_HDRSupport:
def setHlgSupport(configElement):
open("/proc/stb/hdmi/hlg_support", "w").write(configElement.value)
config.av.hlg_support = ConfigSelection(default = "auto(EDID)",
choices = [ ("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled")) ])
config.av.hlg_support.addNotifier(setHlgSupport)
def setHdr10Support(configElement):
open("/proc/stb/hdmi/hdr10_support", "w").write(configElement.value)
config.av.hdr10_support = ConfigSelection(default = "auto(EDID)",
choices = [ ("auto(EDID)", _("controlled by HDMI")), ("yes", _("force enabled")), ("no", _("force disabled")) ])
config.av.hdr10_support.addNotifier(setHdr10Support)
def setDisable12Bit(configElement):
open("/proc/stb/video/disable_12bit", "w").write(configElement.value)
config.av.allow_12bit = ConfigSelection(default = "0", choices = [ ("0", _("yes")), ("1", _("no")) ]);
config.av.allow_12bit.addNotifier(setDisable12Bit)
def setDisable10Bit(configElement):
open("/proc/stb/video/disable_10bit", "w").write(configElement.value)
config.av.allow_10bit = ConfigSelection(default = "0", choices = [ ("0", _("yes")), ("1", _("no")) ]);
config.av.allow_10bit.addNotifier(setDisable10Bit)
if os.path.exists("/proc/stb/hdmi/audio_source"):
f = open("/proc/stb/hdmi/audio_source", "r")
can_audiosource = f.read().strip().split(" ")
f.close()
else:
can_audiosource = False
SystemInfo["Canaudiosource"] = can_audiosource
if can_audiosource:
def setAudioSource(configElement):
try:
f = open("/proc/stb/hdmi/audio_source", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.audio_source = ConfigSelection(choices={
"pcm": _("PCM"),
"spdif": _("SPDIF")},
default="pcm")
config.av.audio_source.addNotifier(setAudioSource)
else:
config.av.audio_source = ConfigNothing()
if os.path.exists("/proc/stb/audio/3d_surround_choices"):
f = open("/proc/stb/audio/3d_surround_choices", "r")
can_3dsurround = f.read().strip().split(" ")
f.close()
else:
can_3dsurround = False
SystemInfo["Can3DSurround"] = can_3dsurround
if can_3dsurround:
def set3DSurround(configElement):
f = open("/proc/stb/audio/3d_surround", "w")
f.write(configElement.value)
f.close()
choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))]
config.av.surround_3d = ConfigSelection(choices = choice_list, default = "none")
config.av.surround_3d.addNotifier(set3DSurround)
else:
config.av.surround_3d = ConfigNothing()
if os.path.exists("/proc/stb/audio/3d_surround_speaker_position_choices"):
f = open("/proc/stb/audio/3d_surround_speaker_position_choices", "r")
can_3dsurround_speaker = f.read().strip().split(" ")
f.close()
else:
can_3dsurround_speaker = False
SystemInfo["Can3DSpeaker"] = can_3dsurround_speaker
if can_3dsurround_speaker:
def set3DSurroundSpeaker(configElement):
f = open("/proc/stb/audio/3d_surround_speaker_position", "w")
f.write(configElement.value)
f.close()
choice_list = [("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))]
config.av.surround_3d_speaker = ConfigSelection(choices = choice_list, default = "center")
config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker)
else:
config.av.surround_3d_speaker = ConfigNothing()
if os.path.exists("/proc/stb/audio/avl_choices"):
f = open("/proc/stb/audio/avl_choices", "r")
can_autovolume = f.read().strip().split(" ")
f.close()
else:
can_autovolume = False
SystemInfo["CanAutoVolume"] = can_autovolume
if can_autovolume:
def setAutoVolume(configElement):
f = open("/proc/stb/audio/avl", "w")
f.write(configElement.value)
f.close()
choice_list = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))]
config.av.autovolume = ConfigSelection(choices = choice_list, default = "none")
config.av.autovolume.addNotifier(setAutoVolume)
else:
config.av.autovolume = ConfigNothing()
try:
can_pcm_multichannel = os.access("/proc/stb/audio/multichannel_pcm", os.W_OK)
except:
can_pcm_multichannel = False
SystemInfo["supportPcmMultichannel"] = can_pcm_multichannel
if can_pcm_multichannel:
def setPCMMultichannel(configElement):
open("/proc/stb/audio/multichannel_pcm", "w").write(configElement.value and "enable" or "disable")
config.av.pcm_multichannel = ConfigYesNo(default = False)
config.av.pcm_multichannel.addNotifier(setPCMMultichannel)
try:
f = open("/proc/stb/audio/ac3_choices", "r")
file = f.read()[:-1]
f.close()
can_downmix_ac3 = "downmix" in file
except:
can_downmix_ac3 = False
SystemInfo["CanPcmMultichannel"] = False
SystemInfo["CanDownmixAC3"] = can_downmix_ac3
if can_downmix_ac3:
def setAC3Downmix(configElement):
f = open("/proc/stb/audio/ac3", "w")
if getBoxType() in ('dm900', 'dm920', 'dm7080', 'dm800'):
f.write(configElement.value)
else:
f.write(configElement.value and "downmix" or "passthrough")
f.close()
if SystemInfo.get("supportPcmMultichannel", False) and not configElement.value:
SystemInfo["CanPcmMultichannel"] = True
else:
SystemInfo["CanPcmMultichannel"] = False
if can_pcm_multichannel:
config.av.pcm_multichannel.setValue(False)
if getBoxType() in ('dm900', 'dm920', 'dm7080', 'dm800'):
choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))]
config.av.downmix_ac3 = ConfigSelection(choices = choice_list, default = "downmix")
else:
config.av.downmix_ac3 = ConfigYesNo(default = True)
config.av.downmix_ac3.addNotifier(setAC3Downmix)
if os.path.exists("/proc/stb/audio/ac3plus_choices"):
f = open("/proc/stb/audio/ac3plus_choices", "r")
can_ac3plustranscode = f.read().strip().split(" ")
f.close()
else:
can_ac3plustranscode = False
SystemInfo["CanAC3plusTranscode"] = can_ac3plustranscode
if can_ac3plustranscode:
def setAC3plusTranscode(configElement):
f = open("/proc/stb/audio/ac3plus", "w")
f.write(configElement.value)
f.close()
if getBoxType() in ('dm900', 'dm920', 'dm7080', 'dm800'):
choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_ac3", _("convert to AC3")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI")), ("force_ddp", _("force AC3plus"))]
config.av.transcodeac3plus = ConfigSelection(choices = choice_list, default = "force_ac3")
elif getBoxType() in ('gbquad4k', 'gbue4k'):
choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("force_ac3", _("convert to AC3")), ("multichannel", _("convert to multi-channel PCM")), ("force_dts", _("convert to DTS"))]
config.av.transcodeac3plus = ConfigSelection(choices = choice_list, default = "force_ac3")
else:
choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_ac3", _("convert to AC3"))]
config.av.transcodeac3plus = ConfigSelection(choices = choice_list, default = "force_ac3")
config.av.transcodeac3plus.addNotifier(setAC3plusTranscode)
try:
f = open("/proc/stb/audio/dtshd_choices", "r")
file = f.read()[:-1]
can_dtshd = f.read().strip().split(" ")
f.close()
except:
can_dtshd = False
SystemInfo["CanDTSHD"] = can_dtshd
if can_dtshd:
def setDTSHD(configElement):
f = open("/proc/stb/audio/dtshd", "w")
f.write(configElement.value)
f.close()
if getBoxType() in ("dm7080" , "dm820"):
choice_list = [("use_hdmi_caps", _("controlled by HDMI")), ("force_dts", _("convert to DTS"))]
config.av.dtshd = ConfigSelection(choices = choice_list, default = "use_hdmi_caps")
else:
choice_list = [("downmix", _("Downmix")), ("force_dts", _("convert to DTS")), ("use_hdmi_caps", _("controlled by HDMI")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))]
config.av.dtshd = ConfigSelection(choices = choice_list, default = "downmix")
config.av.dtshd.addNotifier(setDTSHD)
try:
f = open("/proc/stb/audio/wmapro_choices", "r")
file = f.read()[:-1]
can_wmapro = f.read().strip().split(" ")
f.close()
except:
can_wmapro = False
SystemInfo["CanWMAPRO"] = can_wmapro
if can_wmapro:
def setWMAPRO(configElement):
f = open("/proc/stb/audio/wmapro", "w")
f.write(configElement.value)
f.close()
choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))]
config.av.wmapro = ConfigSelection(choices = choice_list, default = "downmix")
config.av.wmapro.addNotifier(setWMAPRO)
try:
f = open("/proc/stb/audio/dts_choices", "r")
file = f.read()[:-1]
f.close()
can_downmix_dts = "downmix" in file
except:
can_downmix_dts = False
SystemInfo["CanDownmixDTS"] = can_downmix_dts
if can_downmix_dts:
def setDTSDownmix(configElement):
f = open("/proc/stb/audio/dts", "w")
f.write(configElement.value and "downmix" or "passthrough")
f.close()
config.av.downmix_dts = ConfigYesNo(default = True)
config.av.downmix_dts.addNotifier(setDTSDownmix)
try:
f = open("/proc/stb/audio/aac_choices", "r")
file = f.read()[:-1]
f.close()
can_downmix_aac = "downmix" in file
except:
can_downmix_aac = False
SystemInfo["CanDownmixAAC"] = can_downmix_aac
if can_downmix_aac:
def setAACDownmix(configElement):
f = open("/proc/stb/audio/aac", "w")
if getBoxType() in ('dm900', 'dm920', 'dm7080', 'dm800', 'gbquad4k', 'gbue4k'):
f.write(configElement.value)
else:
f.write(configElement.value and "downmix" or "passthrough")
f.close()
if getBoxType() in ('dm900', 'dm920', 'dm7080', 'dm800'):
choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("hdmi_best", _("use best / controlled by HDMI"))]
config.av.downmix_aac = ConfigSelection(choices = choice_list, default = "downmix")
elif getBoxType() in ('gbquad4k', 'gbue4k'):
choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("force_ac3", _("convert to AC3")), ("force_dts", _("convert to DTS")), ("use_hdmi_cacenter", _("use_hdmi_cacenter")), ("wide", _("wide")), ("extrawide", _("extrawide"))]
config.av.downmix_aac = ConfigSelection(choices = choice_list, default = "downmix")
else:
config.av.downmix_aac = ConfigYesNo(default = True)
config.av.downmix_aac.addNotifier(setAACDownmix)
try:
f = open("/proc/stb/audio/aacplus_choices", "r")
file = f.read()[:-1]
f.close()
can_downmix_aacplus = "downmix" in file
except:
can_downmix_aacplus = False
SystemInfo["CanDownmixAACPlus"] = can_downmix_aacplus
if can_downmix_aacplus:
def setAACDownmixPlus(configElement):
f = open("/proc/stb/audio/aacplus", "w")
f.write(configElement.value)
f.close()
choice_list = [("downmix", _("Downmix")), ("passthrough", _("Passthrough")), ("multichannel", _("convert to multi-channel PCM")), ("force_ac3", _("convert to AC3")), ("force_dts", _("convert to DTS")), ("use_hdmi_cacenter", _("use_hdmi_cacenter")), ("wide", _("wide")), ("extrawide", _("extrawide"))]
config.av.downmix_aacplus = ConfigSelection(choices = choice_list, default = "downmix")
config.av.downmix_aacplus.addNotifier(setAACDownmixPlus)
if os.path.exists("/proc/stb/audio/aac_transcode_choices"):
f = open("/proc/stb/audio/aac_transcode_choices", "r")
can_aactranscode = f.read().strip().split(" ")
f.close()
else:
can_aactranscode = False
SystemInfo["CanAACTranscode"] = can_aactranscode
if can_aactranscode:
def setAACTranscode(configElement):
f = open("/proc/stb/audio/aac_transcode", "w")
f.write(configElement.value)
f.close()
choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))]
config.av.transcodeaac = ConfigSelection(choices = choice_list, default = "off")
config.av.transcodeaac.addNotifier(setAACTranscode)
else:
config.av.transcodeaac = ConfigNothing()
if os.path.exists("/proc/stb/audio/btaudio"):
f = open("/proc/stb/audio/btaudio", "r")
can_btaudio = f.read().strip().split(" ")
f.close()
else:
can_btaudio = False
SystemInfo["CanBTAudio"] = can_btaudio
if can_btaudio:
def setBTAudio(configElement):
f = open("/proc/stb/audio/btaudio", "w")
f.write(configElement.value)
f.close()
choice_list = [("off", _("off")), ("on", _("on"))]
config.av.btaudio = ConfigSelection(choices = choice_list, default = "off")
config.av.btaudio.addNotifier(setBTAudio)
else:
config.av.btaudio = ConfigNothing()
if os.path.exists("/proc/stb/audio/btaudio_delay"):
f = open("/proc/stb/audio/btaudio_delay", "r")
can_btaudio_delay = f.read().strip().split(" ")
f.close()
else:
can_btaudio_delay = False
SystemInfo["CanBTAudioDelay"] = can_btaudio_delay
if can_btaudio_delay:
def setBTAudioDelay(configElement):
f = open("/proc/stb/audio/btaudio_delay", "w")
f.write(format(configElement.value * 90,"x"))
f.close()
config.av.btaudiodelay = ConfigSelectionNumber(-1000, 1000, 5, default = 0)
config.av.btaudiodelay.addNotifier(setBTAudioDelay)
else:
config.av.btaudiodelay = ConfigNothing()
if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"):
def setScaler_sharpness(config):
myval = int(config.value)
try:
print "[AVSwitch] setting scaler_sharpness to: %0.8X" % myval
f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w")
f.write("%0.8X\n" % myval)
f.close()
f = open("/proc/stb/vmpeg/0/pep_apply", "w")
f.write("1")
f.close()
except IOError:
print "[AVSwitch] couldn't write pep_scaler_sharpness"
if getBoxType() in ('gbquad', 'gbquadplus'):
config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0,26))
else:
config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0,26))
config.av.scaler_sharpness.addNotifier(setScaler_sharpness)
else:
config.av.scaler_sharpness = NoSave(ConfigNothing())
iAVSwitch.setConfiguredMode()
def InitAVSwitch():
config.av.yuvenabled = ConfigBoolean(default=True)
colorformat_choices = {
"cvbs": _("CVBS"),
"rgb": _("RGB"),
"svideo": _("S-Video")
}
# when YUV is not enabled, don't let the user select it
if config.av.yuvenabled.value:
colorformat_choices["yuv"] = _("YPbPr")
config.av.autores = ConfigSelection(choices={
"disabled": _("Disabled"),
"all": _("All resolutions"),
"hd": _("only HD")
},
default="disabled")
choicelist = []
for i in range(5, 16):
choicelist.append(
("%d" % i, ngettext("%d second", "%d seconds", i) % i))
config.av.autores_label_timeout = ConfigSelection(
default="5", choices=[("0", _("Not Shown"))] + choicelist)
config.av.autores_delay = ConfigSelectionNumber(min=0,
max=15000,
stepwidth=500,
default=500,
wraparound=True)
config.av.autores_deinterlace = ConfigYesNo(default=False)
config.av.autores_sd = ConfigSelection(choices={
"720p": _("720p"),
"1080i": _("1080i")
},
default="720p")
config.av.autores_480p24 = ConfigSelection(choices={
"480p24": _("480p 24Hz"),
"720p24": _("720p 24Hz"),
"1080p24": _("1080p 24Hz")
},
default="1080p24")
config.av.autores_720p24 = ConfigSelection(choices={
"720p24": _("720p 24Hz"),
"1080p24": _("1080p 24Hz")
},
default="1080p24")
config.av.autores_1080p24 = ConfigSelection(choices={
"1080p24": _("1080p 24Hz"),
"1080p25": _("1080p 25Hz")
},
default="1080p24")
config.av.autores_1080p25 = ConfigSelection(choices={
"1080p25": _("1080p 25Hz"),
"1080p50": _("1080p 50Hz")
},
default="1080p25")
config.av.autores_1080p30 = ConfigSelection(choices={
"1080p30": _("1080p 30Hz"),
"1080p60": _("1080p 60Hz")
},
default="1080p30")
config.av.autores_2160p24 = ConfigSelection(choices={
"2160p24": _("2160p 24Hz"),
"2160p25": _("2160p 25Hz"),
"2160p30": _("2160p 30Hz")
},
default="2160p24")
config.av.autores_2160p25 = ConfigSelection(choices={
"2160p25": _("2160p 25Hz"),
"2160p50": _("2160p 50Hz")
},
default="2160p25")
config.av.autores_2160p30 = ConfigSelection(choices={
"2160p30": _("2160p 30Hz"),
"2160p60": _("2160p 60Hz")
},
default="2160p30")
config.av.colorformat = ConfigSelection(choices=colorformat_choices,
default="rgb")
config.av.aspectratio = ConfigSelection(choices={
"4_3_letterbox":
_("4:3 Letterbox"),
"4_3_panscan":
_("4:3 PanScan"),
"16_9":
_("16:9"),
"16_9_always":
_("16:9 always"),
"16_10_letterbox":
_("16:10 Letterbox"),
"16_10_panscan":
_("16:10 PanScan"),
"16_9_letterbox":
_("16:9 Letterbox")
},
default="16_9")
config.av.aspect = ConfigSelection(choices={
"4:3": _("4:3"),
"16:9": _("16:9"),
"16:10": _("16:10"),
"auto": _("Automatic")
},
default="16:9")
policy2_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term.
"letterbox": _("Letterbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"panscan": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect)
"scale": _("Just scale")
}
if os.path.exists("/proc/stb/video/policy2_choices"):
f = open("/proc/stb/video/policy2_choices")
if "auto" in f.readline():
# TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect.
policy2_choices.update({"auto": _("Auto")})
f.close()
config.av.policy_169 = ConfigSelection(choices=policy2_choices,
default="letterbox")
policy_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term.
"panscan": _("Pillarbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"letterbox": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right)
# "nonlinear": _("Nonlinear"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect)
"bestfit": _("Just scale")
}
if os.path.exists("/proc/stb/video/policy_choices"):
f = open("/proc/stb/video/policy_choices")
if "auto" in f.readline():
# TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect.
policy_choices.update({"auto": _("Auto")})
f.close()
config.av.policy_43 = ConfigSelection(choices=policy_choices,
default="panscan")
config.av.tvsystem = ConfigSelection(choices={
"pal": _("PAL"),
"ntsc": _("NTSC"),
"multinorm": _("multinorm")
},
default="pal")
config.av.wss = ConfigEnableDisable(default=True)
config.av.generalAC3delay = ConfigSelectionNumber(-1000,
1000,
5,
default=0)
config.av.generalPCMdelay = ConfigSelectionNumber(-1000,
1000,
5,
default=0)
config.av.vcrswitch = ConfigEnableDisable(default=False)
config.av.aspect.setValue('16:9')
config.av.aspect.addNotifier(iAVSwitch.setAspect)
config.av.wss.addNotifier(iAVSwitch.setWss)
config.av.policy_43.addNotifier(iAVSwitch.setPolicy43)
config.av.policy_169.addNotifier(iAVSwitch.setPolicy169)
def setHDMIColorspace(configElement):
try:
f = open(SystemInfo["havecolorspace"], "w")
f.write(configElement.value)
f.close()
except:
pass
def setHDMIColorimetry(configElement):
try:
f = open(SystemInfo["havecolorimetry"], "w")
f.write(configElement.value)
f.close()
except:
pass
def setHdmiColordepth(configElement):
try:
f = open(SystemInfo["havehdmicolordepth"], "w")
f.write(configElement.value)
f.close()
except:
pass
def set3DSurround(configElement):
f = open("/proc/stb/audio/3d_surround", "w")
f.write(configElement.value)
f.close()
def set3DPosition(configElement):
f = open("/proc/stb/audio/3d_surround_speaker_position", "w")
f.write(configElement.value)
f.close()
def setAutoVolume(configElement):
f = open("/proc/stb/audio/avl", "w")
f.write(configElement.value)
f.close()
def setAC3Downmix(configElement):
f = open("/proc/stb/audio/ac3", "w")
f.write(configElement.value)
f.close()
if SystemInfo.get("supportPcmMultichannel",
False) and not configElement.value:
SystemInfo["CanPcmMultichannel"] = True
else:
SystemInfo["CanPcmMultichannel"] = False
if SystemInfo["supportPcmMultichannel"]:
config.av.pcm_multichannel.setValue(False)
def setAC3plusTranscode(configElement):
f = open("/proc/stb/audio/ac3plus", "w")
f.write(configElement.value)
f.close()
def setDTSDownmix(configElement):
f = open("/proc/stb/audio/dts", "w")
f.write(configElement.value)
f.close()
def setDTSHD(configElement):
f = open("/proc/stb/audio/dtshd", "w")
f.write(configElement.value)
f.close()
def setAACDownmix(configElement):
f = open("/proc/stb/audio/aac", "w")
f.write(configElement.value)
f.close()
def setAACDownmixPlus(configElement):
f = open("/proc/stb/audio/aacplus", "w")
f.write(configElement.value)
f.close()
def setAACTranscode(configElement):
f = open("/proc/stb/audio/aac_transcode", "w")
f.write(configElement.value)
f.close()
def setWMAPRO(configElement):
f = open("/proc/stb/audio/wmapro", "w")
f.write(configElement.value)
f.close()
def setBoxmode(configElement):
try:
f = open("/proc/stb/info/boxmode", "w")
f.write(configElement.value)
f.close()
except:
pass
def setScaler_sharpness(config):
myval = int(config.value)
try:
print "[VideoHardware] setting scaler_sharpness to: %0.8X" % myval
f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w")
f.write("%0.8X" % myval)
f.close()
f = open("/proc/stb/vmpeg/0/pep_apply", "w")
f.write("1")
f.close()
except IOError:
print "[VideoHardware] couldn't write pep_scaler_sharpness"
def setColorFormat(configElement):
if config.av.videoport and config.av.videoport.value in (
"YPbPr", "Scart-YPbPr"):
iAVSwitch.setColorFormat(3)
elif config.av.videoport and config.av.videoport.value in ("RCA"):
iAVSwitch.setColorFormat(0)
else:
map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3}
iAVSwitch.setColorFormat(map[configElement.value])
config.av.colorformat.addNotifier(setColorFormat)
def setAspectRatio(configElement):
map = {
"4_3_letterbox": 0,
"4_3_panscan": 1,
"16_9": 2,
"16_9_always": 3,
"16_10_letterbox": 4,
"16_10_panscan": 5,
"16_9_letterbox": 6
}
iAVSwitch.setAspectRatio(map[configElement.value])
def read_choices(procx, defchoice):
with open(procx, 'r') as myfile:
choices = myfile.read().strip()
myfile.close()
if choices:
choiceslist = choices.split(" ")
choicesx = [(item, _("%s") % item) for item in choiceslist]
defaultx = choiceslist[0]
for item in choiceslist:
if "%s" % defchoice.upper in item.upper():
defaultx = item
break
return (choicesx, defaultx)
iAVSwitch.setInput("ENCODER") # init on startup
SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch()
if SystemInfo["Canedidchecking"]:
def setEDIDBypass(configElement):
try:
f = open("/proc/stb/hdmi/bypass_edid_checking", "w")
f.write(configElement.value)
f.close()
except:
pass
if about.getChipSetString() in ('7111'):
config.av.bypass_edid_checking = ConfigSelection(
choices={
"00000000": _("off"),
"00000001": _("on")
},
default="00000001")
else:
config.av.bypass_edid_checking = ConfigSelection(
choices={
"00000000": _("off"),
"00000001": _("on")
},
default="00000000")
config.av.bypass_edid_checking.addNotifier(setEDIDBypass)
else:
config.av.bypass_edid_checking = ConfigNothing()
if SystemInfo["havecolorspace"]:
if getBrandOEM() == "vuplus" and SystemInfo["HasMMC"]:
choices = [("Edid(Auto)", _("Auto")), ("Hdmi_Rgb", _("RGB")),
("444", _("YCbCr444")), ("422", _("YCbCr422")),
("420", _("YCbCr420"))]
default = "Edid(Auto)"
else:
choices = [("auto", _("Auto")), ("rgb", _("RGB")),
("420", _("420")), ("422", _("422")), ("444", _("444"))]
default = "auto"
if SystemInfo["havecolorspacechoices"] and SystemInfo["CanProc"]:
f = "/proc/stb/video/hdmi_colorspace_choices"
(choices, default) = read_choices(f, default)
config.av.hdmicolorspace = ConfigSelection(choices=choices,
default=default)
config.av.hdmicolorspace.addNotifier(setHDMIColorspace)
else:
config.av.hdmicolorspace = ConfigNothing()
if SystemInfo["havecolorimetry"]:
choices = [("auto", _("auto")), ("bt2020ncl", _("BT 2020 NCL")),
("bt2020cl", _("BT 2020 CL")), ("bt709", _("BT 709"))]
default = "auto"
if SystemInfo["havecolorimetrychoices"] and SystemInfo["CanProc"]:
f = "/proc/stb/video/hdmi_colorimetry_choices"
(choices, default) = read_choices(f, default)
config.av.hdmicolorimetry = ConfigSelection(choices=choices,
default=default)
config.av.hdmicolorimetry.addNotifier(setHDMIColorimetry)
else:
config.av.hdmicolorimetry = ConfigNothing()
if SystemInfo["havehdmicolordepth"]:
choices = [("auto", _("Auto")), ("8bit", _("8bit")),
("10bit", _("10bit")), ("12bit", _("12bit"))]
default = "auto"
if SystemInfo["havehdmicolordepthchoices"] and SystemInfo["CanProc"]:
f = "/proc/stb/video/hdmi_colordepth_choices"
(choices, default) = read_choices(f, default)
config.av.hdmicolordepth = ConfigSelection(choices=choices,
default=default)
config.av.hdmicolordepth.addNotifier(setHdmiColordepth)
else:
config.av.hdmicolordepth = ConfigNothing()
if SystemInfo["havehdmihdrtype"]:
def setHdmiHdrType(configElement):
try:
f = open("/proc/stb/video/hdmi_hdrtype", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.hdmihdrtype = ConfigSelection(choices={
"auto": _("Auto"),
"dolby": _("dolby"),
"none": _("sdr"),
"hdr10": _("hdr10"),
"hlg": _("hlg")
},
default="auto")
config.av.hdmihdrtype.addNotifier(setHdmiHdrType)
else:
config.av.hdmihdrtype = ConfigNothing()
if SystemInfo["HDRSupport"]:
def setHlgSupport(configElement):
open("/proc/stb/hdmi/hlg_support", "w").write(configElement.value)
config.av.hlg_support = ConfigSelection(
default="auto(EDID)",
choices=[("auto(EDID)", _("controlled by HDMI")),
("yes", _("force enabled")), ("no", _("force disabled"))])
config.av.hlg_support.addNotifier(setHlgSupport)
def setHdr10Support(configElement):
open("/proc/stb/hdmi/hdr10_support",
"w").write(configElement.value)
config.av.hdr10_support = ConfigSelection(
default="auto(EDID)",
choices=[("auto(EDID)", _("controlled by HDMI")),
("yes", _("force enabled")), ("no", _("force disabled"))])
config.av.hdr10_support.addNotifier(setHdr10Support)
def setDisable12Bit(configElement):
open("/proc/stb/video/disable_12bit",
"w").write(configElement.value)
config.av.allow_12bit = ConfigSelection(default="0",
choices=[("0", _("yes")),
("1", _("no"))])
config.av.allow_12bit.addNotifier(setDisable12Bit)
def setDisable10Bit(configElement):
open("/proc/stb/video/disable_10bit",
"w").write(configElement.value)
config.av.allow_10bit = ConfigSelection(default="0",
choices=[("0", _("yes")),
("1", _("no"))])
config.av.allow_10bit.addNotifier(setDisable10Bit)
if SystemInfo["Canaudiosource"]:
def setAudioSource(configElement):
try:
f = open("/proc/stb/hdmi/audio_source", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.audio_source = ConfigSelection(choices={
"pcm": _("PCM"),
"spdif": _("SPDIF")
},
default="pcm")
config.av.audio_source.addNotifier(setAudioSource)
else:
config.av.audio_source = ConfigNothing()
if SystemInfo["Can3DSurround"]:
choices = [("none", _("off")), ("hdmi", _("HDMI")),
("spdif", _("SPDIF")), ("dac", _("DAC"))]
default = "none"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/3d_surround_choices"
(choices, default) = read_choices(f, default)
config.av.surround_3d = ConfigSelection(choices=choices,
default="none")
config.av.surround_3d.addNotifier(set3DSurround)
else:
config.av.surround_3d = ConfigNothing()
if SystemInfo["Can3DSpeaker"]:
choices = [("center", _("center")), ("wide", _("wide")),
("extrawide", _("extra wide"))]
default = "center"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/3d_surround_speaker_position_choices"
(choices, default) = read_choices(f, default)
config.av.surround_3d_speaker = ConfigSelection(choices=choices,
default=default)
config.av.surround_3d_speaker.addNotifier(set3DPosition)
else:
config.av.surround_3d_speaker = ConfigNothing()
if SystemInfo["CanAutoVolume"]:
choices = [("none", _("off")), ("hdmi", _("HDMI")),
("spdif", _("SPDIF")), ("dac", _("DAC"))]
default = "none"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/avl_choices"
(choices, default) = read_choices(f, default)
config.av.autovolume = ConfigSelection(choices=choices,
default=default)
config.av.autovolume.addNotifier(setAutoVolume)
else:
config.av.autovolume = ConfigNothing()
if SystemInfo["supportPcmMultichannel"]:
def setPCMMultichannel(configElement):
open("/proc/stb/audio/multichannel_pcm",
"w").write(configElement.value and "enable" or "disable")
config.av.pcm_multichannel = ConfigYesNo(default=False)
config.av.pcm_multichannel.addNotifier(setPCMMultichannel)
if SystemInfo["CanDownmixAC3"]:
choices = [("downmix", _("Downmix")),
("passthrough", _("Passthrough"))]
default = "downmix"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/ac3_choices"
(choices, default) = read_choices(f, default)
config.av.downmix_ac3 = ConfigSelection(choices=choices,
default=default)
config.av.downmix_ac3.addNotifier(setAC3Downmix)
if SystemInfo["CanAC3Transcode"]:
choices = [("use_hdmi_caps", _("controlled by HDMI")),
("force_ac3", _("convert to AC3"))]
default = "force_ac3"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/ac3plus_choices"
(choices, default) = read_choices(f, default)
config.av.transcodeac3plus = ConfigSelection(choices=choices,
default=default)
config.av.transcodeac3plus.addNotifier(setAC3plusTranscode)
if SystemInfo["CanDownmixDTS"]:
choice_list = [("downmix", _("Downmix")),
("passthrough", _("Passthrough"))]
default = "downmix"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/dts_choices"
(choices, default) = read_choices(f, default)
config.av.downmix_dts = ConfigSelection(choices=choices,
default=default)
config.av.downmix_dts.addNotifier(setDTSDownmix)
if SystemInfo["CanDTSHD"]:
choices = [("downmix", _("Downmix")),
("force_dts", _("convert to DTS")),
("use_hdmi_caps", _("controlled by HDMI")),
("multichannel", _("convert to multi-channel PCM")),
("hdmi_best", _("use best / controlled by HDMI"))]
default = "downmix"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/dtshd_choices"
(choices, default) = read_choices(f, default)
config.av.dtshd = ConfigSelection(choices=choices, default=default)
config.av.dtshd.addNotifier(setDTSHD)
if SystemInfo["CanDownmixAAC"]:
choices = [("downmix", _("Downmix")),
("passthrough", _("Passthrough"))]
default = "downmix"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/aac_choices"
(choices, default) = read_choices(f, default)
config.av.downmix_aac = ConfigSelection(choices=choices,
default=default)
config.av.downmix_aac.addNotifier(setAACDownmix)
if SystemInfo["CanDownmixAACPlus"]:
choices = [("downmix", _("Downmix")),
("passthrough", _("Passthrough")),
("multichannel", _("convert to multi-channel PCM")),
("force_ac3", _("convert to AC3")),
("force_dts", _("convert to DTS")),
("use_hdmi_cacenter", _("use_hdmi_cacenter")),
("wide", _("wide")), ("extrawide", _("extrawide"))]
default = "downmix"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/aacplus_choices"
(choices, default) = read_choices(f, default)
config.av.downmix_aacplus = ConfigSelection(choices=choices,
default=default)
config.av.downmix_aacplus.addNotifier(setAACDownmixPlus)
if SystemInfo["CanAACTranscode"]:
choices = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))]
default = "off"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/aac_transcode_choices"
(choices, default) = read_choices(f, default)
config.av.transcodeaac = ConfigSelection(choices=choices,
default=default)
config.av.transcodeaac.addNotifier(setAACTranscode)
else:
config.av.transcodeaac = ConfigNothing()
if SystemInfo["CanWMAPRO"]:
choices = [("downmix", _("Downmix")),
("passthrough", _("Passthrough")),
("multichannel", _("convert to multi-channel PCM")),
("hdmi_best", _("use best / controlled by HDMI"))]
default = "downmix"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/wmapro_choices"
(choices, default) = read_choices(f, default)
config.av.wmapro = ConfigSelection(choices=choices, default=default)
config.av.wmapro.addNotifier(setWMAPRO)
if SystemInfo["haveboxmode"]:
config.av.boxmode = ConfigSelection(choices={
"12":
_("PIP enabled, no HDR"),
"1":
_("HDR, 12bit 4:2:0/4:2:2, no PIP")
},
default="12")
config.av.boxmode.addNotifier(setBoxmode)
else:
config.av.boxmode = ConfigNothing()
if SystemInfo["HasScaler_sharpness"]:
if getBoxType() in ('gbquad', 'gbquadplus'):
config.av.scaler_sharpness = ConfigSlider(default=5,
limits=(0, 26))
else:
config.av.scaler_sharpness = ConfigSlider(default=13,
limits=(0, 26))
config.av.scaler_sharpness.addNotifier(setScaler_sharpness)
else:
config.av.scaler_sharpness = NoSave(ConfigNothing())
config.av.edid_override = ConfigYesNo(default=False)
iAVSwitch.setConfiguredMode()
def InitAVSwitch():
config.av.yuvenabled = ConfigBoolean(default=True)
colorformat_choices = {
"cvbs": _("CVBS"),
"rgb": _("RGB"),
"svideo": _("S-Video")
}
# when YUV is not enabled, don't let the user select it
if config.av.yuvenabled.value:
colorformat_choices["yuv"] = _("YPbPr")
config.av.autores = ConfigSelection(choices={
"disabled": _("Disabled"),
"all": _("All resolutions"),
"hd": _("only HD")
},
default="disabled")
choicelist = []
for i in range(5, 16):
choicelist.append(
("%d" % i, ngettext("%d second", "%d seconds", i) % i))
config.av.autores_label_timeout = ConfigSelection(
default="5", choices=[("0", _("Not Shown"))] + choicelist)
config.av.autores_delay = ConfigSelectionNumber(min=0,
max=15000,
stepwidth=500,
default=500,
wraparound=True)
config.av.autores_deinterlace = ConfigYesNo(default=False)
config.av.autores_sd = ConfigSelection(choices={
"720p": _("720p"),
"1080i": _("1080i")
},
default="720p")
config.av.autores_480p24 = ConfigSelection(choices={
"480p24": _("480p 24Hz"),
"720p24": _("720p 24Hz"),
"1080p24": _("1080p 24Hz")
},
default="1080p24")
config.av.autores_720p24 = ConfigSelection(choices={
"720p24": _("720p 24Hz"),
"1080p24": _("1080p 24Hz")
},
default="1080p24")
config.av.autores_1080p24 = ConfigSelection(choices={
"1080p24": _("1080p 24Hz"),
"1080p25": _("1080p 25Hz")
},
default="1080p24")
config.av.autores_1080p25 = ConfigSelection(choices={
"1080p25": _("1080p 25Hz"),
"1080p50": _("1080p 50Hz")
},
default="1080p25")
config.av.autores_1080p30 = ConfigSelection(choices={
"1080p30": _("1080p 30Hz"),
"1080p60": _("1080p 60Hz")
},
default="1080p30")
config.av.colorformat = ConfigSelection(choices=colorformat_choices,
default="rgb")
config.av.aspectratio = ConfigSelection(choices={
"4_3_letterbox":
_("4:3 Letterbox"),
"4_3_panscan":
_("4:3 PanScan"),
"16_9":
_("16:9"),
"16_9_always":
_("16:9 always"),
"16_10_letterbox":
_("16:10 Letterbox"),
"16_10_panscan":
_("16:10 PanScan"),
"16_9_letterbox":
_("16:9 Letterbox")
},
default="16_9")
config.av.aspect = ConfigSelection(choices={
"4:3": _("4:3"),
"16:9": _("16:9"),
"16:10": _("16:10"),
"auto": _("Automatic")
},
default="16:9")
policy2_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term.
"letterbox": _("Letterbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"panscan": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect)
"scale": _("Just scale")
}
if os.path.exists("/proc/stb/video/policy2_choices"):
f = open("/proc/stb/video/policy2_choices")
if "auto" in f.readline():
# TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect.
policy2_choices.update({"auto": _("Auto")})
f.close()
config.av.policy_169 = ConfigSelection(choices=policy2_choices,
default="letterbox")
policy_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term.
"panscan": _("Pillarbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"letterbox": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right)
# "nonlinear": _("Nonlinear"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect)
"bestfit": _("Just scale")
}
if os.path.exists("/proc/stb/video/policy_choices"):
f = open("/proc/stb/video/policy_choices")
if "auto" in f.readline():
# TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect.
policy_choices.update({"auto": _("Auto")})
f.close()
config.av.policy_43 = ConfigSelection(choices=policy_choices,
default="panscan")
config.av.tvsystem = ConfigSelection(choices={
"pal": _("PAL"),
"ntsc": _("NTSC"),
"multinorm": _("multinorm")
},
default="pal")
config.av.wss = ConfigEnableDisable(default=True)
config.av.generalAC3delay = ConfigSelectionNumber(-1000,
1000,
5,
default=0)
config.av.generalPCMdelay = ConfigSelectionNumber(-1000,
1000,
5,
default=0)
config.av.vcrswitch = ConfigEnableDisable(default=False)
config.av.aspect.setValue('16:9')
config.av.aspect.addNotifier(iAVSwitch.setAspect)
config.av.wss.addNotifier(iAVSwitch.setWss)
config.av.policy_43.addNotifier(iAVSwitch.setPolicy43)
config.av.policy_169.addNotifier(iAVSwitch.setPolicy169)
def setColorFormat(configElement):
if config.av.videoport and config.av.videoport.value in (
"YPbPr", "Scart-YPbPr"):
iAVSwitch.setColorFormat(3)
elif config.av.videoport and config.av.videoport.value in ("RCA"):
iAVSwitch.setColorFormat(0)
else:
map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3}
iAVSwitch.setColorFormat(map[configElement.value])
config.av.colorformat.addNotifier(setColorFormat)
def setAspectRatio(configElement):
map = {
"4_3_letterbox": 0,
"4_3_panscan": 1,
"16_9": 2,
"16_9_always": 3,
"16_10_letterbox": 4,
"16_10_panscan": 5,
"16_9_letterbox": 6
}
iAVSwitch.setAspectRatio(map[configElement.value])
iAVSwitch.setInput("ENCODER") # init on startup
SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch()
if os.path.exists("/proc/stb/hdmi/bypass_edid_checking"):
f = open("/proc/stb/hdmi/bypass_edid_checking", "r")
can_edidchecking = f.read().strip().split(" ")
f.close()
else:
can_edidchecking = False
SystemInfo["Canedidchecking"] = can_edidchecking
if can_edidchecking:
def setEDIDBypass(configElement):
try:
f = open("/proc/stb/hdmi/bypass_edid_checking", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.bypass_edid_checking = ConfigSelection(choices={
"00000000": _("off"),
"00000001": _("on")
},
default="00000000")
config.av.bypass_edid_checking.addNotifier(setEDIDBypass)
else:
config.av.bypass_edid_checking = ConfigNothing()
if os.path.exists("/proc/stb/audio/3d_surround_choices"):
f = open("/proc/stb/audio/3d_surround_choices", "r")
can_3dsurround = f.read().strip().split(" ")
f.close()
else:
can_3dsurround = False
SystemInfo["Can3DSurround"] = can_3dsurround
if can_3dsurround:
def set3DSurround(configElement):
f = open("/proc/stb/audio/3d_surround", "w")
f.write(configElement.value)
f.close()
choice_list = [("none", _("off")), ("hdmi", _("HDMI")),
("spdif", _("SPDIF")), ("dac", _("DAC"))]
config.av.surround_3d = ConfigSelection(choices=choice_list,
default="none")
config.av.surround_3d.addNotifier(set3DSurround)
else:
config.av.surround_3d = ConfigNothing()
if os.path.exists("/proc/stb/audio/3d_surround_speaker_position_choices"):
f = open("/proc/stb/audio/3d_surround_speaker_position_choices", "r")
can_3dsurround_speaker = f.read().strip().split(" ")
f.close()
else:
can_3dsurround_speaker = False
SystemInfo["Can3DSpeaker"] = can_3dsurround_speaker
if can_3dsurround_speaker:
def set3DSurroundSpeaker(configElement):
f = open("/proc/stb/audio/3d_surround_speaker_position", "w")
f.write(configElement.value)
f.close()
choice_list = [("center", _("center")), ("wide", _("wide")),
("extrawide", _("extra wide"))]
config.av.surround_3d_speaker = ConfigSelection(choices=choice_list,
default="center")
config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker)
else:
config.av.surround_3d_speaker = ConfigNothing()
if os.path.exists("/proc/stb/audio/avl_choices"):
f = open("/proc/stb/audio/avl_choices", "r")
can_autovolume = f.read().strip().split(" ")
f.close()
else:
can_autovolume = False
SystemInfo["CanAutoVolume"] = can_autovolume
if can_autovolume:
def setAutoVolume(configElement):
f = open("/proc/stb/audio/avl", "w")
f.write(configElement.value)
f.close()
choice_list = [("none", _("off")), ("hdmi", _("HDMI")),
("spdif", _("SPDIF")), ("dac", _("DAC"))]
config.av.autovolume = ConfigSelection(choices=choice_list,
default="none")
config.av.autovolume.addNotifier(setAutoVolume)
else:
config.av.autovolume = ConfigNothing()
try:
can_pcm_multichannel = os.access("/proc/stb/audio/multichannel_pcm",
os.W_OK)
except:
can_pcm_multichannel = False
SystemInfo["supportPcmMultichannel"] = can_pcm_multichannel
if can_pcm_multichannel:
def setPCMMultichannel(configElement):
open("/proc/stb/audio/multichannel_pcm",
"w").write(configElement.value and "enable" or "disable")
config.av.pcm_multichannel = ConfigYesNo(default=False)
config.av.pcm_multichannel.addNotifier(setPCMMultichannel)
try:
f = open("/proc/stb/audio/ac3_choices", "r")
file = f.read()[:-1]
f.close()
can_downmix_ac3 = "downmix" in file
except:
can_downmix_ac3 = False
SystemInfo["CanDownmixAC3"] = can_downmix_ac3
if can_downmix_ac3:
def setAC3Downmix(configElement):
f = open("/proc/stb/audio/ac3", "w")
f.write(configElement.value and "downmix" or "passthrough")
f.close()
if SystemInfo.get("supportPcmMultichannel",
False) and not configElement.value:
SystemInfo["CanPcmMultichannel"] = True
else:
SystemInfo["CanPcmMultichannel"] = False
if can_pcm_multichannel:
config.av.pcm_multichannel.setValue(False)
config.av.downmix_ac3 = ConfigYesNo(default=True)
config.av.downmix_ac3.addNotifier(setAC3Downmix)
try:
f = open("/proc/stb/audio/aac_choices", "r")
file = f.read()[:-1]
f.close()
can_downmix_aac = "downmix" in file
except:
can_downmix_aac = False
SystemInfo["CanDownmixAAC"] = can_downmix_aac
if can_downmix_aac:
def setAACDownmix(configElement):
f = open("/proc/stb/audio/aac", "w")
f.write(configElement.value and "downmix" or "passthrough")
f.close()
config.av.downmix_aac = ConfigYesNo(default=True)
config.av.downmix_aac.addNotifier(setAACDownmix)
if os.path.exists("/proc/stb/audio/aac_transcode_choices"):
f = open("/proc/stb/audio/aac_transcode_choices", "r")
can_aactranscode = f.read().strip().split(" ")
f.close()
else:
can_aactranscode = False
SystemInfo["CanAACTranscode"] = can_aactranscode
if can_aactranscode:
def setAACTranscode(configElement):
f = open("/proc/stb/audio/aac_transcode", "w")
f.write(configElement.value)
f.close()
choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))]
config.av.transcodeaac = ConfigSelection(choices=choice_list,
default="off")
config.av.transcodeaac.addNotifier(setAACTranscode)
else:
config.av.transcodeaac = ConfigNothing()
if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"):
def setScaler_sharpness(config):
myval = int(config.value)
try:
print "[VideoMode] setting scaler_sharpness to: %0.8X" % myval
f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w")
f.write("%0.8X" % myval)
f.close()
f = open("/proc/stb/vmpeg/0/pep_apply", "w")
f.write("1")
f.close()
except IOError:
print "couldn't write pep_scaler_sharpness"
if getBoxType() in ('gbquad', 'gbquadplus'):
config.av.scaler_sharpness = ConfigSlider(default=5,
limits=(0, 26))
else:
config.av.scaler_sharpness = ConfigSlider(default=13,
limits=(0, 26))
config.av.scaler_sharpness.addNotifier(setScaler_sharpness)
else:
config.av.scaler_sharpness = NoSave(ConfigNothing())
config.av.edid_override = ConfigYesNo(default=False)
iAVSwitch.setConfiguredMode()
def InitAVSwitch():
config.av = ConfigSubsection()
if getBoxType() == "vuduo" or getBoxBrand() == "ixuss":
config.av.yuvenabled = ConfigBoolean(default=False)
else:
config.av.yuvenabled = ConfigBoolean(default=True)
colorformat_choices = {"cvbs": _("CVBS")}
# when YUV, Scart or S-Video is not support by HW, don't let the user select it
if SystemInfo["HasYPbPr"]:
colorformat_choices["yuv"] = _("YPbPr")
if SystemInfo["HasScart"]:
colorformat_choices["rgb"] = _("RGB")
if SystemInfo["HasSVideo"]:
colorformat_choices["svideo"] = _("S-Video")
config.av.colorformat = ConfigSelection(choices=colorformat_choices,
default="cvbs")
config.av.aspectratio = ConfigSelection(choices={
"4_3_letterbox":
_("4:3 Letterbox"),
"4_3_panscan":
_("4:3 PanScan"),
"16_9":
_("16:9"),
"16_9_always":
_("16:9 always"),
"16_10_letterbox":
_("16:10 Letterbox"),
"16_10_panscan":
_("16:10 PanScan"),
"16_9_letterbox":
_("16:9 Letterbox")
},
default="16_9")
config.av.aspect = ConfigSelection(choices={
"4_3": _("4:3"),
"16_9": _("16:9"),
"16_10": _("16:10"),
"auto": _("Automatic")
},
default="auto")
policy2_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term.
"letterbox": _("Letterbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"panscan": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible)
"scale": _("Just scale")
}
try:
if "full" in open("/proc/stb/video/policy2_choices").read():
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio)
policy2_choices.update({"full": _("Full screen")})
except:
pass
try:
if "auto" in open("/proc/stb/video/policy2_choices").read():
# TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode)
policy2_choices.update({"auto": _("Auto")})
except:
pass
config.av.policy_169 = ConfigSelection(choices=policy2_choices,
default="scale")
policy_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term.
"pillarbox": _("Pillarbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"panscan": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible)
"scale": _("Just scale")
}
try:
if "nonlinear" in open("/proc/stb/video/policy_choices").read():
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right)
policy_choices.update({"nonlinear": _("Nonlinear")})
except:
pass
try:
if "full" in open("/proc/stb/video/policy_choices").read():
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio)
policy_choices.update({"full": _("Full screen")})
except:
pass
try:
if "auto" in open("/proc/stb/video/policy_choices").read():
# TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode)
policy_choices.update({"auto": _("Auto")})
except:
pass
config.av.policy_43 = ConfigSelection(choices=policy_choices,
default="scale")
config.av.tvsystem = ConfigSelection(choices={
"pal": _("PAL"),
"ntsc": _("NTSC"),
"multinorm": _("multinorm")
},
default="pal")
config.av.wss = ConfigEnableDisable(default=True)
config.av.generalAC3delay = ConfigSelectionNumber(-1000,
1000,
5,
default=0)
config.av.generalPCMdelay = ConfigSelectionNumber(-1000,
1000,
5,
default=0)
config.av.vcrswitch = ConfigEnableDisable(default=False)
iAVSwitch = AVSwitch()
def setColorFormat(configElement):
if getBoxType() == "et6x00":
map = {"cvbs": 3, "rgb": 3, "svideo": 2, "yuv": 3}
elif SystemInfo["GigaBlueQuad"] or getBoxType().startswith('et'):
map = {"cvbs": 0, "rgb": 3, "svideo": 2, "yuv": 3}
else:
map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3}
iAVSwitch.setColorFormat(map[configElement.value])
def setAspectRatio(configElement):
map = {
"4_3_letterbox": 0,
"4_3_panscan": 1,
"16_9": 2,
"16_9_always": 3,
"16_10_letterbox": 4,
"16_10_panscan": 5,
"16_9_letterbox": 6
}
iAVSwitch.setAspectRatio(map[configElement.value])
def setSystem(configElement):
map = {"pal": 0, "ntsc": 1, "multinorm": 2}
iAVSwitch.setSystem(map[configElement.value])
def setWSS(configElement):
iAVSwitch.setAspectWSS()
# this will call the "setup-val" initial
config.av.colorformat.addNotifier(setColorFormat)
config.av.aspectratio.addNotifier(setAspectRatio)
config.av.tvsystem.addNotifier(setSystem)
config.av.wss.addNotifier(setWSS)
iAVSwitch.setInput("ENCODER") # init on startup
if SystemInfo["GigaBlueQuad"] or getBoxType() in (
"et5x00", "et6x00", "ixussone", "ixusszero", "axodin", "axodinc",
"starsatlx", "galaxym6", "geniuse3hd", "evoe3hd", "axase3",
"axase3c", "optimussos1", "optimussos2", "gb800seplus",
"gb800ueplus", "gbultrase", "gbultraue", "gbultraueh",
"twinboxlcd"):
detected = False
else:
detected = eAVSwitch.getInstance().haveScartSwitch()
SystemInfo["ScartSwitch"] = detected
if SystemInfo["CanDownmixAC3"]:
def setAC3Downmix(configElement):
if SystemInfo["DreamBoxAudio"]:
open("/proc/stb/audio/ac3", "w").write(configElement.value)
else:
open("/proc/stb/audio/ac3",
"w").write(configElement.value and "downmix"
or "passthrough")
if SystemInfo["DreamBoxAudio"]:
choice_list = [("downmix", _("Downmix")),
("passthrough", _("Passthrough")),
("multichannel", _("convert to multi-channel PCM")),
("hdmi_best", _("use best / controlled by HDMI"))]
config.av.downmix_ac3 = ConfigSelection(choices=choice_list,
default="downmix")
else:
config.av.downmix_ac3 = ConfigYesNo(default=True)
config.av.downmix_ac3.addNotifier(setAC3Downmix)
if SystemInfo["CanAC3plusTranscode"]:
def setAC3plusTranscode(configElement):
open("/proc/stb/audio/ac3plus", "w").write(configElement.value)
if SystemInfo["DreamBoxAudio"]:
choice_list = [("use_hdmi_caps", _("controlled by HDMI")),
("force_ac3", _("convert to AC3")),
("multichannel", _("convert to multi-channel PCM")),
("hdmi_best", _("use best / controlled by HDMI")),
("force_ddp", _("force AC3plus"))]
config.av.transcodeac3plus = ConfigSelection(choices=choice_list,
default="force_ac3")
elif SystemInfo["GigaBlueAudio"]:
choice_list = [("downmix", _("Downmix")),
("passthrough", _("Passthrough")),
("force_ac3", _("convert to AC3")),
("multichannel", _("convert to multi-channel PCM")),
("force_dts", _("convert to DTS"))]
config.av.transcodeac3plus = ConfigSelection(choices=choice_list,
default="force_ac3")
else:
choice_list = [("use_hdmi_caps", _("controlled by HDMI")),
("force_ac3", _("convert to AC3"))]
config.av.transcodeac3plus = ConfigSelection(choices=choice_list,
default="force_ac3")
config.av.transcodeac3plus.addNotifier(setAC3plusTranscode)
if SystemInfo["CanDownmixDTS"]:
def setDTSDownmix(configElement):
open("/proc/stb/audio/dts",
"w").write(configElement.value and "downmix" or "passthrough")
config.av.downmix_dts = ConfigYesNo(default=True)
config.av.downmix_dts.addNotifier(setDTSDownmix)
if SystemInfo["CanDTSHD"]:
def setDTSHD(configElement):
open("/proc/stb/audio/dtshd", "w").write(configElement.value)
if SystemInfo["DreamBoxDTSAudio"]:
choice_list = [("use_hdmi_caps", _("controlled by HDMI")),
("force_dts", _("convert to DTS"))]
config.av.dtshd = ConfigSelection(choices=choice_list,
default="use_hdmi_caps")
else:
choice_list = [("downmix", _("Downmix")),
("force_dts", _("convert to DTS")),
("use_hdmi_caps", _("controlled by HDMI")),
("multichannel", _("convert to multi-channel PCM")),
("hdmi_best", _("use best / controlled by HDMI"))]
config.av.dtshd = ConfigSelection(choices=choice_list,
default="downmix")
config.av.dtshd.addNotifier(setDTSHD)
if SystemInfo["CanWMAPRO"]:
def setWMAPRO(configElement):
open("/proc/stb/audio/wmapro", "w").write(configElement.value)
choice_list = [("downmix", _("Downmix")),
("passthrough", _("Passthrough")),
("multichannel", _("convert to multi-channel PCM")),
("hdmi_best", _("use best / controlled by HDMI"))]
config.av.wmapro = ConfigSelection(choices=choice_list,
default="downmix")
config.av.wmapro.addNotifier(setWMAPRO)
if SystemInfo["CanDownmixAAC"]:
def setAACDownmix(configElement):
if SystemInfo["DreamBoxAudio"] or SystemInfo["GigaBlueAudio"]:
open("/proc/stb/audio/aac", "w").write(configElement.value)
else:
open("/proc/stb/audio/aac",
"w").write(configElement.value and "downmix"
or "passthrough")
if SystemInfo["DreamBoxAudio"]:
choice_list = [("downmix", _("Downmix")),
("passthrough", _("Passthrough")),
("multichannel", _("convert to multi-channel PCM")),
("hdmi_best", _("use best / controlled by HDMI"))]
config.av.downmix_aac = ConfigSelection(choices=choice_list,
default="downmix")
elif SystemInfo["GigaBlueAudio"]:
choice_list = [("downmix", _("Downmix")),
("passthrough", _("Passthrough")),
("multichannel", _("convert to multi-channel PCM")),
("force_ac3", _("convert to AC3")),
("force_dts", _("convert to DTS")),
("use_hdmi_cacenter", _("use_hdmi_cacenter")),
("wide", _("wide")), ("extrawide", _("extrawide"))]
config.av.downmix_aac = ConfigSelection(choices=choice_list,
default="downmix")
else:
config.av.downmix_aac = ConfigYesNo(default=True)
config.av.downmix_aac.addNotifier(setAACDownmix)
if SystemInfo["CanDownmixAACPlus"]:
def setAACDownmixPlus(configElement):
open("/proc/stb/audio/aacplus", "w").write(configElement.value)
choice_list = [("downmix", _("Downmix")),
("passthrough", _("Passthrough")),
("multichannel", _("convert to multi-channel PCM")),
("force_ac3", _("convert to AC3")),
("force_dts", _("convert to DTS")),
("use_hdmi_cacenter", _("use_hdmi_cacenter")),
("wide", _("wide")), ("extrawide", _("extrawide"))]
config.av.downmix_aacplus = ConfigSelection(choices=choice_list,
default="downmix")
config.av.downmix_aacplus.addNotifier(setAACDownmixPlus)
if SystemInfo["CanAACTranscode"]:
def setAACTranscode(configElement):
open("/proc/stb/audio/aac_transcode",
"w").write(configElement.value)
choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))]
config.av.transcodeaac = ConfigSelection(choices=choice_list,
default="off")
config.av.transcodeaac.addNotifier(setAACTranscode)
else:
config.av.transcodeaac = ConfigNothing()
if SystemInfo["CanBTAudio"]:
def setBTAudio(configElement):
open("/proc/stb/audio/btaudio", "w").write(configElement.value)
choice_list = [("off", _("off")), ("on", _("on"))]
config.av.btaudio = ConfigSelection(choices=choice_list, default="off")
config.av.btaudio.addNotifier(setBTAudio)
else:
config.av.btaudio = ConfigNothing()
if SystemInfo["CanBTAudioDelay"]:
def setBTAudioDelay(configElement):
open("/proc/stb/audio/btaudio",
"w").write(format(configElement.value * 90))
config.av.btaudiodelay = ConfigSelectionNumber(-1000,
1000,
5,
default=0)
config.av.btaudiodelay.addNotifier(setBTAudioDelay)
else:
config.av.btaudiodelay = ConfigNothing()
if SystemInfo["CanChangeOsdAlpha"]:
def setAlpha(config):
open("/proc/stb/video/alpha", "w").write(str(config.value))
config.av.osd_alpha = ConfigSlider(default=255, limits=(0, 255))
config.av.osd_alpha.addNotifier(setAlpha)
if SystemInfo["ScalerSharpness"]:
def setScaler_sharpness(config):
myval = int(config.value)
try:
print("--> setting scaler_sharpness to: %0.8X" % myval)
open("/proc/stb/vmpeg/0/pep_scaler_sharpness",
"w").write("%0.8X" % myval)
open("/proc/stb/vmpeg/0/pep_apply", "w").write("1")
except IOError:
print("[AVSwitch] couldn't write pep_scaler_sharpness")
if SystemInfo["GigaBlueQuad"]:
config.av.scaler_sharpness = ConfigSlider(default=5,
limits=(0, 26))
else:
config.av.scaler_sharpness = ConfigSlider(default=13,
limits=(0, 26))
config.av.scaler_sharpness.addNotifier(setScaler_sharpness)
else:
config.av.scaler_sharpness = NoSave(ConfigNothing())
if SystemInfo["HasMultichannelPCM"]:
def setMultichannelPCM(configElement):
open(SystemInfo["HasMultichannelPCM"],
"w").write(configElement.value and "enable" or "disable")
config.av.multichannel_pcm = ConfigYesNo(default=False)
config.av.multichannel_pcm.addNotifier(setMultichannelPCM)
if SystemInfo["HasAutoVolume"]:
def setAutoVolume(configElement):
open(SystemInfo["HasAutoVolume"], "w").write(configElement.value)
config.av.autovolume = ConfigSelection(default="none",
choices=[("none", _("off")),
("hdmi", _("HDMI")),
("spdif", _("SPDIF")),
("dac", _("DAC"))])
config.av.autovolume.addNotifier(setAutoVolume)
if SystemInfo["HasAutoVolumeLevel"]:
def setAutoVolumeLevel(configElement):
open(SystemInfo["HasAutoVolumeLevel"],
"w").write(configElement.value and "enabled" or "disabled")
config.av.autovolumelevel = ConfigYesNo(default=False)
config.av.autovolumelevel.addNotifier(setAutoVolumeLevel)
if SystemInfo["Has3DSurround"]:
def set3DSurround(configElement):
open(SystemInfo["Has3DSurround"], "w").write(configElement.value)
config.av.surround_3d = ConfigSelection(default="none",
choices=[("none", _("off")),
("hdmi", _("HDMI")),
("spdif", _("SPDIF")),
("dac", _("DAC"))])
config.av.surround_3d.addNotifier(set3DSurround)
if SystemInfo["Has3DSpeaker"]:
def set3DSpeaker(configElement):
open(SystemInfo["Has3DSpeaker"], "w").write(configElement.value)
config.av.speaker_3d = ConfigSelection(default="center",
choices=[("center",
_("center")),
("wide", _("wide")),
("extrawide",
_("extra wide"))])
config.av.speaker_3d.addNotifier(set3DSpeaker)
if SystemInfo["Has3DSurroundSpeaker"]:
def set3DSurroundSpeaker(configElement):
open(SystemInfo["Has3DSurroundSpeaker"],
"w").write(configElement.value)
config.av.surround_3d_speaker = ConfigSelection(
default="disabled",
choices=[("disabled", _("off")), ("center", _("center")),
("wide", _("wide")), ("extrawide", _("extra wide"))])
config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker)
if SystemInfo["Has3DSurroundSoftLimiter"]:
def set3DSurroundSoftLimiter(configElement):
open(SystemInfo["Has3DSurroundSoftLimiter"],
"w").write(configElement.value and "enabled" or "disabled")
config.av.surround_softlimiter_3d = ConfigYesNo(default=False)
config.av.surround_softlimiter_3d.addNotifier(set3DSurroundSoftLimiter)
if SystemInfo["HDMIAudioSource"]:
def setHDMIAudioSource(configElement):
open(SystemInfo["HDMIAudioSource"], "w").write(configElement.value)
config.av.hdmi_audio_source = ConfigSelection(default="pcm",
choices=[
("pcm", _("PCM")),
("spdif", _("SPDIF"))
])
config.av.hdmi_audio_source.addNotifier(setHDMIAudioSource)
def setVolumeStepsize(configElement):
eDVBVolumecontrol.getInstance().setVolumeSteps(int(
configElement.value))
config.av.volume_stepsize = ConfigSelectionNumber(1, 10, 1, default=5)
config.av.volume_stepsize.addNotifier(setVolumeStepsize)
def InitAVSwitch():
config.av = ConfigSubsection()
config.av.yuvenabled = ConfigBoolean(default=True)
colorformat_choices = {"cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video")}
# when YUV is not enabled, don't let the user select it
if config.av.yuvenabled.value:
colorformat_choices["yuv"] = _("YPbPr")
config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb")
config.av.aspectratio = ConfigSelection(choices={
"4_3_letterbox": _("4:3 Letterbox"),
"4_3_panscan": _("4:3 PanScan"),
"16_9": _("16:9"),
"16_9_always": _("16:9 always"),
"16_10_letterbox": _("16:10 Letterbox"),
"16_10_panscan": _("16:10 PanScan"),
"16_9_letterbox": _("16:9 Letterbox")},
default = "16_9")
config.av.aspect = ConfigSelection(choices={
"4_3": _("4:3"),
"16_9": _("16:9"),
"16_10": _("16:10"),
"auto": _("Automatic")},
default = "auto")
policy2_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term.
"letterbox": _("Letterbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"panscan": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect)
"scale": _("Just scale")}
try:
if "auto" in open("/proc/stb/video/policy2_choices").read():
# TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect.
policy2_choices.update({"auto": _("Auto")})
except:
pass
config.av.policy_169 = ConfigSelection(choices=policy2_choices, default = "letterbox")
policy_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term.
"pillarbox": _("Pillarbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"panscan": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right)
"nonlinear": _("Nonlinear"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect)
"scale": _("Just scale")}
try:
if "auto" in open("/proc/stb/video/policy_choices").read():
# TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect.
policy_choices.update({"auto": _("Auto")})
except:
pass
config.av.policy_43 = ConfigSelection(choices=policy_choices, default = "pillarbox")
config.av.tvsystem = ConfigSelection(choices = {"pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm")}, default="pal")
config.av.wss = ConfigEnableDisable(default = True)
config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default = 0)
config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default = 0)
config.av.vcrswitch = ConfigEnableDisable(default = False)
iAVSwitch = AVSwitch()
def setColorFormat(configElement):
map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3}
iAVSwitch.setColorFormat(map[configElement.value])
def setAspectRatio(configElement):
map = {"4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox" : 6}
iAVSwitch.setAspectRatio(map[configElement.value])
def setSystem(configElement):
map = {"pal": 0, "ntsc": 1, "multinorm" : 2}
iAVSwitch.setSystem(map[configElement.value])
def setWSS(configElement):
iAVSwitch.setAspectWSS()
# this will call the "setup-val" initial
config.av.colorformat.addNotifier(setColorFormat)
config.av.aspectratio.addNotifier(setAspectRatio)
config.av.tvsystem.addNotifier(setSystem)
config.av.wss.addNotifier(setWSS)
iAVSwitch.setInput("ENCODER") # init on startup
SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch()
try:
SystemInfo["CanDownmixAC3"] = "downmix" in open("/proc/stb/audio/ac3_choices", "r").read()
except:
SystemInfo["CanDownmixAC3"] = False
if SystemInfo["CanDownmixAC3"]:
def setAC3Downmix(configElement):
open("/proc/stb/audio/ac3", "w").write(configElement.value and "downmix" or "passthrough")
config.av.downmix_ac3 = ConfigYesNo(default = True)
config.av.downmix_ac3.addNotifier(setAC3Downmix)
try:
SystemInfo["CanDownmixDTS"] = "downmix" in open("/proc/stb/audio/dts_choices", "r").read()
except:
SystemInfo["CanDownmixDTS"] = False
if SystemInfo["CanDownmixDTS"]:
def setDTSDownmix(configElement):
open("/proc/stb/audio/dts", "w").write(configElement.value and "downmix" or "passthrough")
config.av.downmix_dts = ConfigYesNo(default = True)
config.av.downmix_dts.addNotifier(setDTSDownmix)
try:
SystemInfo["CanDownmixAAC"] = "downmix" in open("/proc/stb/audio/aac_choices", "r").read()
except:
SystemInfo["CanDownmixAAC"] = False
if SystemInfo["CanDownmixAAC"]:
def setAACDownmix(configElement):
open("/proc/stb/audio/aac", "w").write(configElement.value and "downmix" or "passthrough")
config.av.downmix_aac = ConfigYesNo(default = True)
config.av.downmix_aac.addNotifier(setAACDownmix)
try:
SystemInfo["CanChangeOsdAlpha"] = open("/proc/stb/video/alpha", "r") and True or False
except:
SystemInfo["CanChangeOsdAlpha"] = False
if SystemInfo["CanChangeOsdAlpha"]:
def setAlpha(config):
open("/proc/stb/video/alpha", "w").write(str(config.value))
config.av.osd_alpha = ConfigSlider(default=255, limits=(0,255))
config.av.osd_alpha.addNotifier(setAlpha)
if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"):
def setScaler_sharpness(config):
myval = int(config.value)
try:
print "--> setting scaler_sharpness to: %0.8X" % myval
open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w").write("%0.8X" % myval)
open("/proc/stb/vmpeg/0/pep_apply", "w").write("1")
except IOError:
print "couldn't write pep_scaler_sharpness"
config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0,26))
config.av.scaler_sharpness.addNotifier(setScaler_sharpness)
else:
config.av.scaler_sharpness = NoSave(ConfigNothing())
if SystemInfo["HasMultichannelPCM"]:
def setMultichannelPCM(configElement):
open(SystemInfo["HasMultichannelPCM"], "w").write(configElement.value and "enable" or "disable")
config.av.multichannel_pcm = ConfigYesNo(default = False)
config.av.multichannel_pcm.addNotifier(setMultichannelPCM)
def setVolumeStepsize(configElement):
eDVBVolumecontrol.getInstance().setVolumeSteps(int(configElement.value))
config.av.volume_stepsize = ConfigSelectionNumber(1, 10, 1, default = 2)
config.av.volume_stepsize.addNotifier(setVolumeStepsize)
def InitAVSwitch():
config.av = ConfigSubsection()
config.av.yuvenabled = ConfigBoolean(default=True)
colorformat_choices = {"cvbs": _("CVBS")}
# when YUV, Scart or S-Video is not support by HW, don't let the user select it
if SystemInfo["HasYPbPr"]:
colorformat_choices["yuv"] = _("YPbPr")
if SystemInfo["HasScart"]:
colorformat_choices["rgb"] = _("RGB")
if SystemInfo["HasSVideo"]:
colorformat_choices["svideo"] = _("S-Video")
config.av.colorformat = ConfigSelection(choices=colorformat_choices,
default="cvbs")
config.av.aspectratio = ConfigSelection(choices={
"4_3_letterbox":
_("4:3 Letterbox"),
"4_3_panscan":
_("4:3 Zoom"),
"16_9":
_("16:9"),
"16_9_always":
_("16:9 always"),
"16_10_letterbox":
_("16:10 Letterbox"),
"16_10_panscan":
_("16:10 Zoom"),
"16_9_letterbox":
_("16:9 Letterbox")
},
default="16_9")
config.av.aspect = ConfigSelection(choices={
"4_3": _("4:3"),
"16_9": _("16:9"),
"16_10": _("16:10"),
"auto": _("Automatic")
},
default="auto")
policy2_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term.
"letterbox": _("Letterbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on top/bottom) in doubt, keep english term
"panscan": _("Zoom"),
# TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible)
"scale": _("Stretch")
}
try:
if "full" in open("/proc/stb/video/policy2_choices").read():
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio)
policy2_choices.update({"full": _("Full screen")})
except:
pass
try:
if "auto" in open("/proc/stb/video/policy2_choices").read():
# TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode)
policy2_choices.update({"auto": _("Auto")})
except:
pass
config.av.policy_169 = ConfigSelection(choices=policy2_choices,
default="letterbox")
policy_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term.
"pillarbox": _("Pillarbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"panscan": _("Zoom"),
# TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible)
"scale": _("Stretch")
}
try:
if "nonlinear" in open("/proc/stb/video/policy_choices").read():
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right)
policy_choices.update({"nonlinear": _("Panoramic")})
except:
pass
try:
if "full" in open("/proc/stb/video/policy_choices").read():
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio)
policy_choices.update({"full": _("Full screen")})
except:
pass
try:
if "auto" in open("/proc/stb/video/policy_choices").read():
# TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode)
policy_choices.update({"auto": _("Auto")})
except:
pass
config.av.policy_43 = ConfigSelection(choices=policy_choices,
default="pillarbox")
config.av.tvsystem = ConfigSelection(choices={
"pal": _("PAL"),
"ntsc": _("NTSC"),
"multinorm": _("Multinorm")
},
default="multinorm")
config.av.wss = ConfigEnableDisable(default=False)
config.av.generalAC3delay = ConfigSelectionNumber(-1000,
1000,
5,
default=0)
config.av.generalPCMdelay = ConfigSelectionNumber(-1000,
1000,
5,
default=0)
config.av.vcrswitch = ConfigEnableDisable(default=False)
iAVSwitch = AVSwitch()
def setColorFormat(configElement):
map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3}
iAVSwitch.setColorFormat(map[configElement.value])
def setAspectRatio(configElement):
map = {
"4_3_letterbox": 0,
"4_3_panscan": 1,
"16_9": 2,
"16_9_always": 3,
"16_10_letterbox": 4,
"16_10_panscan": 5,
"16_9_letterbox": 6
}
iAVSwitch.setAspectRatio(map[configElement.value])
def setSystem(configElement):
map = {"pal": 0, "ntsc": 1, "multinorm": 2}
iAVSwitch.setSystem(map[configElement.value])
def setWSS(configElement):
iAVSwitch.setAspectWSS()
# this will call the "setup-val" initial
config.av.colorformat.addNotifier(setColorFormat)
config.av.aspectratio.addNotifier(setAspectRatio)
config.av.tvsystem.addNotifier(setSystem)
config.av.wss.addNotifier(setWSS)
iAVSwitch.setInput("ENCODER") # init on startup
SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch()
if SystemInfo["CanDownmixAC3"]:
def setAC3Downmix(configElement):
open("/proc/stb/audio/ac3",
"w").write(configElement.value and "downmix" or "passthrough")
config.av.downmix_ac3 = ConfigYesNo(default=True)
config.av.downmix_ac3.addNotifier(setAC3Downmix)
if SystemInfo["CanDownmixDTS"]:
def setDTSDownmix(configElement):
open("/proc/stb/audio/dts",
"w").write(configElement.value and "downmix" or "passthrough")
config.av.downmix_dts = ConfigYesNo(default=True)
config.av.downmix_dts.addNotifier(setDTSDownmix)
if SystemInfo["CanDownmixAAC"]:
def setAACDownmix(configElement):
open("/proc/stb/audio/aac",
"w").write(configElement.value and "downmix" or "passthrough")
config.av.downmix_aac = ConfigYesNo(default=True)
config.av.downmix_aac.addNotifier(setAACDownmix)
try:
SystemInfo["CanChangeOsdAlpha"] = open("/proc/stb/video/alpha",
"r") and True or False
except:
SystemInfo["CanChangeOsdAlpha"] = False
if SystemInfo["CanChangeOsdAlpha"]:
def setAlpha(config):
open("/proc/stb/video/alpha", "w").write(str(config.value))
config.av.osd_alpha = ConfigSlider(default=255, limits=(0, 255))
config.av.osd_alpha.addNotifier(setAlpha)
if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"):
def setScaler_sharpness(config):
myval = int(config.value)
try:
print "--> setting scaler_sharpness to: %0.8X" % myval
open("/proc/stb/vmpeg/0/pep_scaler_sharpness",
"w").write("%0.8X" % myval)
open("/proc/stb/vmpeg/0/pep_apply", "w").write("1")
except IOError:
print "couldn't write pep_scaler_sharpness"
config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26))
config.av.scaler_sharpness.addNotifier(setScaler_sharpness)
else:
config.av.scaler_sharpness = NoSave(ConfigNothing())
if SystemInfo["HasMultichannelPCM"]:
def setMultichannelPCM(configElement):
open(SystemInfo["HasMultichannelPCM"],
"w").write(configElement.value and "enable" or "disable")
config.av.multichannel_pcm = ConfigYesNo(default=False)
config.av.multichannel_pcm.addNotifier(setMultichannelPCM)
if SystemInfo["HasAutoVolume"]:
def setAutoVolume(configElement):
open(SystemInfo["HasAutoVolume"], "w").write(configElement.value)
config.av.autovolume = ConfigSelection(default="none",
choices=[("none", _("off")),
("hdmi", _("HDMI")),
("spdif", _("SPDIF")),
("dac", _("DAC"))])
config.av.autovolume.addNotifier(setAutoVolume)
if SystemInfo["HasAutoVolumeLevel"]:
def setAutoVolumeLevel(configElement):
open(SystemInfo["HasAutoVolumeLevel"],
"w").write(configElement.value and "enabled" or "disabled")
config.av.autovolumelevel = ConfigYesNo(default=False)
config.av.autovolumelevel.addNotifier(setAutoVolumeLevel)
if SystemInfo["Has3DSurround"]:
def set3DSurround(configElement):
open(SystemInfo["Has3DSurround"], "w").write(configElement.value)
config.av.surround_3d = ConfigSelection(default="none",
choices=[("none", _("off")),
("hdmi", _("HDMI")),
("spdif", _("SPDIF")),
("dac", _("DAC"))])
config.av.surround_3d.addNotifier(set3DSurround)
if SystemInfo["Has3DSpeaker"]:
def set3DSpeaker(configElement):
open(SystemInfo["Has3DSpeaker"], "w").write(configElement.value)
config.av.speaker_3d = ConfigSelection(default="center",
choices=[("center",
_("center")),
("wide", _("wide")),
("extrawide",
_("extra wide"))])
config.av.speaker_3d.addNotifier(set3DSpeaker)
if SystemInfo["Has3DSurroundSpeaker"]:
def set3DSurroundSpeaker(configElement):
open(SystemInfo["Has3DSurroundSpeaker"],
"w").write(configElement.value)
config.av.surround_3d_speaker = ConfigSelection(
default="disabled",
choices=[("disabled", _("off")), ("center", _("center")),
("wide", _("wide")), ("extrawide", _("extra wide"))])
config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker)
if SystemInfo["Has3DSurroundSoftLimiter"]:
def set3DSurroundSoftLimiter(configElement):
open(SystemInfo["Has3DSurroundSoftLimiter"],
"w").write(configElement.value and "enabled" or "disabled")
config.av.surround_softlimiter_3d = ConfigYesNo(default=False)
config.av.surround_softlimiter_3d.addNotifier(set3DSurroundSoftLimiter)
if SystemInfo["HDMIAudioSource"]:
def setHDMIAudioSource(configElement):
open(SystemInfo["HDMIAudioSource"], "w").write(configElement.value)
config.av.hdmi_audio_source = ConfigSelection(default="pcm",
choices=[
("pcm", _("PCM")),
("spdif", _("SPDIF"))
])
config.av.hdmi_audio_source.addNotifier(setHDMIAudioSource)
def setVolumeStepsize(configElement):
eDVBVolumecontrol.getInstance().setVolumeSteps(int(
configElement.value))
config.av.volume_stepsize = ConfigSelectionNumber(1, 10, 1, default=5)
config.av.volume_stepsize.addNotifier(setVolumeStepsize)
def InitUsageConfig():
config.misc.useNTPminutes = ConfigSelection(default = "30", choices = [("30", "30" + " " +_("minutes")), ("60", _("Hour")), ("1440", _("Once per day"))])
config.usage = ConfigSubsection()
config.usage.showdish = ConfigYesNo(default = True)
config.misc.showrotorposition = ConfigSelection(default = "no", choices = [("no", _("no")), ("yes", _("yes")), ("withtext", _("with text")), ("tunername", _("with tuner name"))])
config.usage.multibouquet = ConfigYesNo(default = True)
config.usage.alternative_number_mode = ConfigYesNo(default = False)
def alternativeNumberModeChange(configElement):
eDVBDB.getInstance().setNumberingMode(configElement.value)
refreshServiceList()
config.usage.alternative_number_mode.addNotifier(alternativeNumberModeChange)
config.usage.hide_number_markers = ConfigYesNo(default = True)
config.usage.hide_number_markers.addNotifier(refreshServiceList)
config.usage.crypto_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])
config.usage.crypto_icon_mode.addNotifier(refreshServiceList)
config.usage.servicetype_icon_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename"))])
config.usage.servicetype_icon_mode.addNotifier(refreshServiceList)
config.usage.record_indicator_mode = ConfigSelection(default = "0", choices = [("0", _("None")), ("1", _("Left from servicename")), ("2", _("Right from servicename")), ("3", _("Red colored"))])
config.usage.record_indicator_mode.addNotifier(refreshServiceList)
choicelist = [("-1", _("Disable"))]
for i in range(0,1300,100):
choicelist.append((str(i), ngettext("%d pixel wide", "%d pixels wide", i) % i))
config.usage.servicelist_column = ConfigSelection(default="-1", choices=choicelist)
config.usage.servicelist_column.addNotifier(refreshServiceList)
config.usage.service_icon_enable = ConfigYesNo(default = False)
config.usage.service_icon_enable.addNotifier(refreshServiceList)
config.usage.servicelist_cursor_behavior = ConfigSelection(default = "standard", choices = [
("standard", _("Standard")),
("keep", _("Keep service")),
("reverseB", _("Reverse bouquet buttons")),
("keep reverseB", _("Keep service") + " + " + _("Reverse bouquet buttons"))])
config.usage.multiepg_ask_bouquet = ConfigYesNo(default = False)
config.usage.quickzap_bouquet_change = ConfigYesNo(default = False)
config.usage.e1like_radio_mode = ConfigYesNo(default = True)
config.usage.volume_step_slow = ConfigSelectionNumber(default = 1, stepwidth = 1, min = 1, max = 10, wraparound = False)
config.usage.volume_step_fast = ConfigSelectionNumber(default = 3, stepwidth = 1, min = 1, max = 10, wraparound = False)
choicelist = [("0", _("No timeout"))]
for i in range(1, 12):
choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i))
config.usage.infobar_timeout = ConfigSelection(default = "5", choices = choicelist)
config.usage.show_infobar_on_zap = ConfigYesNo(default = True)
config.usage.show_infobar_on_skip = ConfigYesNo(default = True)
config.usage.show_infobar_on_event_change = ConfigYesNo(default = False)
config.usage.show_second_infobar = ConfigSelection(default = "11", choices = [(None, _("None"))] + choicelist + [("EPG",_("EPG"))])
config.usage.infobar_frontend_source = ConfigSelection(default = "tuner", choices = [("settings", _("Settings")), ("tuner", _("Tuner"))])
config.usage.oldstyle_zap_controls = ConfigSelection(default = "standard", choices = [
("standard", _("Standard")),
("neutrino", _("Neutrino")),
("openspa", _("OpenSPA")) ])
config.usage.oldstyle_channel_select_controls = ConfigYesNo(default = False)
config.usage.zap_with_ch_buttons = ConfigYesNo(default = False)
config.usage.ok_is_channelselection = ConfigYesNo(default = False)
config.usage.channelselection_preview = ConfigYesNo(default = False)
config.usage.show_spinner = ConfigYesNo(default = True)
config.usage.enable_tt_caching = ConfigYesNo(default = True)
config.usage.sort_settings = ConfigYesNo(default = False)
config.usage.sort_menus = ConfigYesNo(default = False)
choicelist = []
for i in (10, 30):
choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i))
for i in (60, 120, 300, 600, 1200, 1800):
m = i / 60
choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m))
for i in (3600, 7200, 14400):
h = i / 3600
choicelist.append((str(i), ngettext("%d hour", "%d hours", h) % h))
config.usage.hdd_standby = ConfigSelection(default = "300", choices = [("0", _("No standby"))] + choicelist)
config.usage.hdd_standby_in_standby = ConfigSelection(default = "-1", choices = [("-1", _("Same as in active")), ("0", _("No standby"))] + choicelist)
config.usage.hdd_timer = ConfigYesNo(default = False)
config.usage.output_12V = ConfigSelection(default = "do not change", choices = [
("do not change", _("Do not change")), ("off", _("Off")), ("on", _("On")) ])
config.usage.pip_zero_button = ConfigSelection(default = "standard", choices = [
("standard", _("Standard")), ("swap", _("Swap PiP and main picture")),
("swapstop", _("Move PiP to main picture")), ("stop", _("Stop PiP")) ])
config.usage.pip_hideOnExit = ConfigSelection(default = "without popup", choices = [
("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")) ])
choicelist = [("-1", _("Disabled")), ("0", _("No timeout"))]
for i in [60, 300, 600, 900, 1800, 2700, 3600]:
m = i/60
choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m))
config.usage.pip_last_service_timeout = ConfigSelection(default = "0", choices = choicelist)
config.usage.default_path = ConfigText(default = resolveFilename(SCOPE_HDD))
config.usage.timer_path = ConfigText(default = "<default>")
config.usage.instantrec_path = ConfigText(default = "<default>")
config.usage.timeshift_path = ConfigText(default = "/media/hdd/")
config.usage.allowed_timeshift_paths = ConfigLocations(default = ["/media/hdd/"])
config.plisettings = ConfigSubsection()
config.plisettings.Subservice = ConfigYesNo(default = True)
config.oscaminfo = ConfigSubsection()
config.oscaminfo.showInExtensions = ConfigYesNo(default=False)
config.oscaminfo.userdatafromconf = ConfigYesNo(default = False)
config.oscaminfo.autoupdate = ConfigYesNo(default = False)
config.oscaminfo.username = ConfigText(default = "username", fixed_size = False, visible_width=12)
config.oscaminfo.password = ConfigPassword(default = "password", fixed_size = False)
config.oscaminfo.ip = ConfigIP( default = [ 127,0,0,1 ], auto_jump=True)
config.oscaminfo.port = ConfigInteger(default = 16002, limits=(0,65536) )
config.oscaminfo.intervall = ConfigSelectionNumber(min = 1, max = 600, stepwidth = 1, default = 10, wraparound = True)
config.cccaminfo = ConfigSubsection()
config.cccaminfo.showInExtensions = ConfigYesNo(default=False)
config.cccaminfo.serverNameLength = ConfigSelectionNumber(min = 10, max = 100, stepwidth = 1, default = 22, wraparound = True)
config.cccaminfo.name = ConfigText(default="Profile", fixed_size=False)
config.cccaminfo.ip = ConfigText(default="192.168.2.12", fixed_size=False)
config.cccaminfo.username = ConfigText(default="", fixed_size=False)
config.cccaminfo.password = ConfigText(default="", fixed_size=False)
config.cccaminfo.port = ConfigInteger(default=16001, limits=(1, 65535))
config.cccaminfo.profile = ConfigText(default="", fixed_size=False)
config.cccaminfo.ecmInfoEnabled = ConfigYesNo(default=True)
config.cccaminfo.ecmInfoTime = ConfigSelectionNumber(min = 1, max = 10, stepwidth = 1, default = 5, wraparound = True)
config.cccaminfo.ecmInfoForceHide = ConfigYesNo(default=True)
config.cccaminfo.ecmInfoPositionX = ConfigInteger(default=50)
config.cccaminfo.ecmInfoPositionY = ConfigInteger(default=50)
config.cccaminfo.blacklist = ConfigText(default="/media/cf/CCcamInfo.blacklisted", fixed_size=False)
config.cccaminfo.profiles = ConfigText(default="/media/cf/CCcamInfo.profiles", fixed_size=False)
config.usage.movielist_trashcan = ConfigYesNo(default=True)
config.usage.movielist_trashcan_days = ConfigNumber(default=8)
config.usage.movielist_trashcan_reserve = ConfigNumber(default=40)
config.usage.on_movie_start = ConfigSelection(default = "resume", choices = [
("ask yes", _("Ask user") + " " + _("default") + " " + _("yes")),
("ask no", _("Ask user") + " " + _("default") + " " + _("no")),
("resume", _("Resume from last position")),
("beginning", _("Start from the beginning"))])
config.usage.on_movie_stop = ConfigSelection(default = "movielist", choices = [
("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")) ])
config.usage.on_movie_eof = ConfigSelection(default = "movielist", choices = [
("ask", _("Ask user")), ("movielist", _("Return to movie list")), ("quit", _("Return to previous service")), ("pause", _("Pause movie at end")), ("playlist", _("Play next (return to movie list)")),
("playlistquit", _("Play next (return to previous service)")), ("loop", _("Continues play (loop)")), ("repeatcurrent", _("Repeat"))])
config.usage.next_movie_msg = ConfigYesNo(default = True)
config.usage.last_movie_played = ConfigText()
config.usage.leave_movieplayer_onExit = ConfigSelection(default = "popup", choices = [
("no", _("No")), ("popup", _("With popup")), ("without popup", _("Without popup")), ("movielist", _("Return to movie list")) ])
config.usage.setup_level = ConfigSelection(default = "expert", choices = [
("simple", _("Simple")),
("intermediate", _("Intermediate")),
("expert", _("Expert")) ])
config.usage.startup_to_standby = ConfigSelection(default = "no", choices = [
("no", _("No")),
("yes", _("Yes")),
("except", _("No, except Wakeup timer")) ])
config.usage.wakeup_enabled = ConfigSelection(default = "no", choices = [
("no", _("No")),
("yes", _("Yes")),
("standby", _("Yes, only from standby")),
("deepstandby", _("Yes, only from deep standby")) ])
config.usage.wakeup_day = ConfigSubDict()
config.usage.wakeup_time = ConfigSubDict()
for i in range(7):
config.usage.wakeup_day[i] = ConfigEnableDisable(default = False)
config.usage.wakeup_time[i] = ConfigClock(default = ((6 * 60 + 0) * 60))
config.usage.on_long_powerpress = ConfigSelection(default = "show_menu", choices = [
("show_menu", _("Show shutdown menu")),
("shutdown", _("Immediate shutdown")),
("standby", _("Standby")),
("restart", _("Reboot")) ] )
config.usage.on_short_powerpress = ConfigSelection(default = "standby", choices = [
("show_menu", _("Show shutdown menu")),
("shutdown", _("Immediate shutdown")),
("standby", _("Standby")) ] )
choicelist = [("0", _("Do nothing"))]
for i in range(3600, 21601, 3600):
h = abs(i / 3600)
h = ngettext("%d hour", "%d hours", h) % h
choicelist.append((str(i), _("Standby in ") + h))
config.usage.inactivity_timer = ConfigSelection(default = "0", choices = choicelist)
config.usage.inactivity_timer_blocktime = ConfigYesNo(default = True)
config.usage.inactivity_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_extra = ConfigYesNo(default = False)
config.usage.inactivity_timer_blocktime_extra_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_extra_end = ConfigClock(default = time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_by_weekdays = ConfigYesNo(default = False)
config.usage.inactivity_timer_blocktime_day = ConfigSubDict()
config.usage.inactivity_timer_blocktime_begin_day = ConfigSubDict()
config.usage.inactivity_timer_blocktime_end_day = ConfigSubDict()
config.usage.inactivity_timer_blocktime_extra_day = ConfigSubDict()
config.usage.inactivity_timer_blocktime_extra_begin_day = ConfigSubDict()
config.usage.inactivity_timer_blocktime_extra_end_day = ConfigSubDict()
for i in range(7):
config.usage.inactivity_timer_blocktime_day[i] = ConfigYesNo(default = False)
config.usage.inactivity_timer_blocktime_begin_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 18, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_end_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_extra_day[i] = ConfigYesNo(default = False)
config.usage.inactivity_timer_blocktime_extra_begin_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
config.usage.inactivity_timer_blocktime_extra_end_day[i] = ConfigClock(default = time.mktime((0, 0, 0, 9, 0, 0, 0, 0, 0)))
choicelist = [("0", _("Disabled")),("event_standby", _("Standby after current event"))]
for i in range(900, 7201, 900):
m = abs(i / 60)
m = ngettext("%d minute", "%d minutes", m) % m
choicelist.append((str(i), _("Standby in ") + m))
config.usage.sleep_timer = ConfigSelection(default = "0", choices = choicelist)
choicelist = [("0", _("Disabled"))]
for i in [60, 300, 600] + range(900, 7201, 900):
m = abs(i / 60)
m = ngettext("%d minute", "%d minutes", m) % m
choicelist.append((str(i), _("after ") + m))
config.usage.standby_to_shutdown_timer = ConfigSelection(default = "0", choices = choicelist)
config.usage.standby_to_shutdown_timer_blocktime = ConfigYesNo(default = False)
config.usage.standby_to_shutdown_timer_blocktime_begin = ConfigClock(default = time.mktime((0, 0, 0, 6, 0, 0, 0, 0, 0)))
config.usage.standby_to_shutdown_timer_blocktime_end = ConfigClock(default = time.mktime((0, 0, 0, 23, 0, 0, 0, 0, 0)))
choicelist = [("0", _("Disabled"))]
for m in (1, 5, 10, 15, 30, 60):
choicelist.append((str(m * 60), ngettext("%d minute", "%d minutes", m) % m))
config.usage.screen_saver = ConfigSelection(default = "300", choices = choicelist)
config.usage.check_timeshift = ConfigYesNo(default = True)
choicelist = [("0", _("Disabled"))]
for i in (2, 3, 4, 5, 10, 20, 30):
choicelist.append((str(i), ngettext("%d second", "%d seconds", i) % i))
for i in (60, 120, 300):
m = i / 60
choicelist.append((str(i), ngettext("%d minute", "%d minutes", m) % m))
config.usage.timeshift_start_delay = ConfigSelection(default = "0", choices = choicelist)
config.usage.alternatives_priority = ConfigSelection(default = "0", choices = [
("0", "DVB-S/-C/-T"),
("1", "DVB-S/-T/-C"),
("2", "DVB-C/-S/-T"),
("3", "DVB-C/-T/-S"),
("4", "DVB-T/-C/-S"),
("5", "DVB-T/-S/-C"),
("127", _("No priority")) ])
def remote_fallback_changed(configElement):
if configElement.value:
configElement.value = "%s%s" % (not configElement.value.startswith("http://") and "http://" or "", configElement.value)
configElement.value = "%s%s" % (configElement.value, configElement.value.count(":") == 1 and ":8001" or "")
config.usage.remote_fallback_enabled = ConfigYesNo(default = False)
config.usage.remote_fallback = ConfigText(default = _("http://IP-ADDRESS:8001"), fixed_size = False)
config.usage.remote_fallback.addNotifier(remote_fallback_changed, immediate_feedback=False)
config.usage.show_timer_conflict_warning = ConfigYesNo(default = True)
dvbs_nims = [("-2", _("Disabled"))]
dvbt_nims = [("-2", _("Disabled"))]
dvbc_nims = [("-2", _("Disabled"))]
atsc_nims = [("-2", _("Disabled"))]
nims = [("-1", _("auto"))]
for x in nimmanager.nim_slots:
if x.isCompatible("DVB-S"):
dvbs_nims.append((str(x.slot), x.getSlotName()))
elif x.isCompatible("DVB-T"):
dvbt_nims.append((str(x.slot), x.getSlotName()))
elif x.isCompatible("DVB-C"):
dvbc_nims.append((str(x.slot), x.getSlotName()))
elif x.isCompatible("ATSC"):
atsc_nims.append((str(x.slot), x.getSlotName()))
nims.append((str(x.slot), x.getSlotName()))
config.usage.frontend_priority = ConfigSelection(default = "-1", choices = list(nims))
nims.insert(0,("-2", _("Disabled")))
config.usage.recording_frontend_priority = ConfigSelection(default = "-2", choices = nims)
config.usage.frontend_priority_dvbs = ConfigSelection(default = "-2", choices = list(dvbs_nims))
dvbs_nims.insert(1,("-1", _("auto")))
config.usage.recording_frontend_priority_dvbs = ConfigSelection(default = "-2", choices = dvbs_nims)
config.usage.frontend_priority_dvbt = ConfigSelection(default = "-2", choices = list(dvbt_nims))
dvbt_nims.insert(1,("-1", _("auto")))
config.usage.recording_frontend_priority_dvbt = ConfigSelection(default = "-2", choices = dvbt_nims)
config.usage.frontend_priority_dvbc = ConfigSelection(default = "-2", choices = list(dvbc_nims))
dvbc_nims.insert(1,("-1", _("auto")))
config.usage.recording_frontend_priority_dvbc = ConfigSelection(default = "-2", choices = dvbc_nims)
config.usage.frontend_priority_atsc = ConfigSelection(default = "-2", choices = list(atsc_nims))
atsc_nims.insert(1,("-1", _("auto")))
config.usage.recording_frontend_priority_atsc = ConfigSelection(default = "-2", choices = atsc_nims)
SystemInfo["DVB-S_priority_tuner_available"] = len(dvbs_nims) > 3 and any(len(i) > 2 for i in (dvbt_nims, dvbc_nims, atsc_nims))
SystemInfo["DVB-T_priority_tuner_available"] = len(dvbt_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbc_nims, atsc_nims))
SystemInfo["DVB-C_priority_tuner_available"] = len(dvbc_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbt_nims, atsc_nims))
SystemInfo["ATSC_priority_tuner_available"] = len(atsc_nims) > 3 and any(len(i) > 2 for i in (dvbs_nims, dvbc_nims, dvbt_nims))
config.misc.disable_background_scan = ConfigYesNo(default = False)
config.usage.servicenum_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True)
config.usage.servicename_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True)
config.usage.serviceinfo_fontsize = ConfigSelectionNumber(default = 0, stepwidth = 1, min = -8, max = 10, wraparound = True)
config.usage.serviceitems_per_page = ConfigSelectionNumber(default = 14, stepwidth = 1, min = 8, max = 20, wraparound = True)
config.usage.show_event_progress_in_servicelist = ConfigSelection(default = 'barright', choices = [
('barleft', _("Progress bar left")),
('barright', _("Progress bar right")),
('percleft', _("Percentage left")),
('percright', _("Percentage right")),
('no', _("No")) ])
config.usage.show_channel_numbers_in_servicelist = ConfigYesNo(default = True)
config.usage.show_event_progress_in_servicelist.addNotifier(refreshServiceList)
config.usage.show_channel_numbers_in_servicelist.addNotifier(refreshServiceList)
config.usage.blinking_display_clock_during_recording = ConfigYesNo(default = False)
config.usage.blinking_rec_symbol_during_recording = ConfigYesNo(default = False)
config.usage.show_message_when_recording_starts = ConfigYesNo(default = True)
config.usage.load_length_of_movies_in_moviellist = ConfigYesNo(default = True)
config.usage.show_icons_in_movielist = ConfigSelection(default = 'i', choices = [
('o', _("Off")),
('p', _("Progress")),
('s', _("Small progress")),
('i', _("Icons")),
])
config.usage.movielist_unseen = ConfigYesNo(default = False)
config.usage.swap_snr_on_osd = ConfigYesNo(default = False)
config.usage.swap_time_display_on_osd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
config.usage.swap_media_time_display_on_osd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
config.usage.swap_time_remaining_on_osd = ConfigSelection(default = "0", choices = [("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))])
config.usage.elapsed_time_positive_osd = ConfigYesNo(default = False)
config.usage.swap_time_display_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
config.usage.swap_media_time_display_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Skin Setting")), ("1", _("Mins")), ("2", _("Mins Secs")), ("3", _("Hours Mins")), ("4", _("Hours Mins Secs")), ("5", _("Percentage"))])
config.usage.swap_time_remaining_on_vfd = ConfigSelection(default = "0", choices = [("0", _("Remaining")), ("1", _("Elapsed")), ("2", _("Elapsed & Remaining")), ("3", _("Remaining & Elapsed"))])
config.usage.elapsed_time_positive_vfd = ConfigYesNo(default = False)
config.usage.lcd_scroll_delay = ConfigSelection(default = "10000", choices = [
("10000", "10 " + _("seconds")),
("20000", "20 " + _("seconds")),
("30000", "30 " + _("seconds")),
("60000", "1 " + _("minute")),
("300000", "5 " + _("minutes")),
("noscrolling", _("off"))])
config.usage.lcd_scroll_speed = ConfigSelection(default = "300", choices = [
("500", _("slow")),
("300", _("normal")),
("100", _("fast"))])
config.usage.maxchannelnumlen = ConfigSelection(default = "5", choices = [("4", _("4")), ("5", _("5"))])
config.usage.numzaptimeoutmode = ConfigSelection(default = "standard", choices = [("standard", _("Standard")), ("userdefined", _("User defined")), ("off", _("off"))])
config.usage.numzaptimeout1 = ConfigSlider(default = 3000, increment = 250, limits = (750, 5000))
config.usage.numzaptimeout2 = ConfigSlider(default = 1000, increment = 250, limits = (750, 5000))
def SpinnerOnOffChanged(configElement):
setSpinnerOnOff(int(configElement.value))
config.usage.show_spinner.addNotifier(SpinnerOnOffChanged)
def EnableTtCachingChanged(configElement):
setEnableTtCachingOnOff(int(configElement.value))
config.usage.enable_tt_caching.addNotifier(EnableTtCachingChanged)
def TunerTypePriorityOrderChanged(configElement):
setTunerTypePriorityOrder(int(configElement.value))
config.usage.alternatives_priority.addNotifier(TunerTypePriorityOrderChanged, immediate_feedback=False)
def PreferredTunerChanged(configElement):
setPreferredTuner(int(configElement.value))
config.usage.frontend_priority.addNotifier(PreferredTunerChanged)
config.usage.hide_zap_errors = ConfigYesNo(default = False)
config.usage.hide_ci_messages = ConfigYesNo(default = True)
config.usage.show_cryptoinfo = ConfigYesNo(default = True)
config.usage.show_eit_nownext = ConfigYesNo(default = True)
config.usage.show_vcr_scart = ConfigYesNo(default = False)
config.usage.show_update_disclaimer = ConfigYesNo(default = True)
config.usage.pic_resolution = ConfigSelection(default = None, choices = [(None, _("Same resolution as skin")), ("(720, 576)","720x576"), ("(1280, 720)", "1280x720"), ("(1920, 1080)", "1920x1080")])
if SystemInfo["Fan"]:
choicelist = [('off', _("Off")), ('on', _("On")), ('auto', _("Auto"))]
if os.path.exists("/proc/stb/fp/fan_choices"):
choicelist = [x for x in choicelist if x[0] in open("/proc/stb/fp/fan_choices", "r").read().strip().split(" ")]
config.usage.fan = ConfigSelection(choicelist)
def fanChanged(configElement):
open(SystemInfo["Fan"], "w").write(configElement.value)
config.usage.fan.addNotifier(fanChanged)
if SystemInfo["FanPWM"]:
def fanSpeedChanged(configElement):
open(SystemInfo["FanPWM"], "w").write(hex(configElement.value)[2:])
config.usage.fanspeed = ConfigSlider(default=127, increment=8, limits=(0, 255))
config.usage.fanspeed.addNotifier(fanSpeedChanged)
if SystemInfo["StandbyLED"]:
def standbyLEDChanged(configElement):
open(SystemInfo["StandbyLED"], "w").write(configElement.value and "on" or "off")
config.usage.standbyLED = ConfigYesNo(default = True)
config.usage.standbyLED.addNotifier(standbyLEDChanged)
config.epg = ConfigSubsection()
config.epg.eit = ConfigYesNo(default = True)
config.epg.mhw = ConfigYesNo(default = True)
config.epg.freesat = ConfigYesNo(default = True)
config.epg.viasat = ConfigYesNo(default = True)
config.epg.netmed = ConfigYesNo(default = True)
config.epg.virgin = ConfigYesNo(default = False)
config.misc.showradiopic = ConfigYesNo(default = True)
def EpgSettingsChanged(configElement):
from enigma import eEPGCache
mask = 0xffffffff
if not config.epg.eit.value:
mask &= ~(eEPGCache.NOWNEXT | eEPGCache.SCHEDULE | eEPGCache.SCHEDULE_OTHER)
if not config.epg.mhw.value:
mask &= ~eEPGCache.MHW
if not config.epg.freesat.value:
mask &= ~(eEPGCache.FREESAT_NOWNEXT | eEPGCache.FREESAT_SCHEDULE | eEPGCache.FREESAT_SCHEDULE_OTHER)
if not config.epg.viasat.value:
mask &= ~eEPGCache.VIASAT
if not config.epg.netmed.value:
mask &= ~(eEPGCache.NETMED_SCHEDULE | eEPGCache.NETMED_SCHEDULE_OTHER)
if not config.epg.virgin.value:
mask &= ~(eEPGCache.VIRGIN_NOWNEXT | eEPGCache.VIRGIN_SCHEDULE)
eEPGCache.getInstance().setEpgSources(mask)
config.epg.eit.addNotifier(EpgSettingsChanged)
config.epg.mhw.addNotifier(EpgSettingsChanged)
config.epg.freesat.addNotifier(EpgSettingsChanged)
config.epg.viasat.addNotifier(EpgSettingsChanged)
config.epg.netmed.addNotifier(EpgSettingsChanged)
config.epg.virgin.addNotifier(EpgSettingsChanged)
config.epg.maxdays = ConfigSelectionNumber(min = 1, max = 28, stepwidth = 1, default = 5, wraparound = True)
def EpgmaxdaysChanged(configElement):
from enigma import eEPGCache
eEPGCache.getInstance().setEpgmaxdays(config.epg.maxdays.getValue())
config.epg.maxdays.addNotifier(EpgmaxdaysChanged)
config.epg.histminutes = ConfigSelectionNumber(min = 0, max = 120, stepwidth = 15, default = 0, wraparound = True)
def EpgHistorySecondsChanged(configElement):
from enigma import eEPGCache
eEPGCache.getInstance().setEpgHistorySeconds(config.epg.histminutes.getValue()*60)
config.epg.histminutes.addNotifier(EpgHistorySecondsChanged)
def setHDDStandby(configElement):
for hdd in harddiskmanager.HDDList():
hdd[1].setIdleTime(int(configElement.value))
config.usage.hdd_standby.addNotifier(setHDDStandby, immediate_feedback=False)
if SystemInfo["12V_Output"]:
def set12VOutput(configElement):
Misc_Options.getInstance().set_12V_output(configElement.value == "on" and 1 or 0)
config.usage.output_12V.addNotifier(set12VOutput, immediate_feedback=False)
config.usage.keymap = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keymap.xml"))
config.usage.keytrans = ConfigText(default = eEnv.resolve("${datadir}/enigma2/keytranslation.xml"))
config.network = ConfigSubsection()
if SystemInfo["WakeOnLAN"]:
def wakeOnLANChanged(configElement):
if getBoxType() in ('et7000', 'et7500', 'gbx1', 'gbx3', 'et10000', 'gbquadplus', 'gbquad', 'gb800ueplus', 'gb800seplus', 'gbultraue', 'gbultrase', 'gbipbox', 'quadbox2400', 'mutant2400', 'et7x00', 'et8500', 'et8500s'):
open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "on" or "off")
else:
open(SystemInfo["WakeOnLAN"], "w").write(configElement.value and "enable" or "disable")
config.network.wol = ConfigYesNo(default = False)
config.network.wol.addNotifier(wakeOnLANChanged)
config.network.Inadyn_autostart = ConfigYesNo(default = False)
config.network.OpenVPN_autostart = ConfigYesNo(default = False)
config.seek = ConfigSubsection()
config.seek.selfdefined_13 = ConfigNumber(default=15)
config.seek.selfdefined_46 = ConfigNumber(default=60)
config.seek.selfdefined_79 = ConfigNumber(default=300)
config.seek.speeds_forward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
config.seek.speeds_backward = ConfigSet(default=[2, 4, 8, 16, 32, 64, 128], choices=[1, 2, 4, 6, 8, 12, 16, 24, 32, 48, 64, 96, 128])
config.seek.speeds_slowmotion = ConfigSet(default=[2, 4, 8], choices=[2, 4, 6, 8, 12, 16, 25])
config.seek.enter_forward = ConfigSelection(default = "2", choices = ["2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])
config.seek.enter_backward = ConfigSelection(default = "1", choices = ["1", "2", "4", "6", "8", "12", "16", "24", "32", "48", "64", "96", "128"])
config.seek.on_pause = ConfigSelection(default = "play", choices = [
("play", _("Play")),
("step", _("Single step (GOP)")),
("last", _("Last speed")) ])
config.crash = ConfigSubsection()
config.crash.details = ConfigYesNo(default = False)
debugpath = [('/home/root/logs/', '/home/root/')]
for p in harddiskmanager.getMountedPartitions():
if os.path.exists(p.mountpoint):
d = os.path.normpath(p.mountpoint)
if p.mountpoint != '/':
debugpath.append((p.mountpoint + 'logs/', d))
config.crash.debug_path = ConfigSelection(default = "/home/root/logs/", choices = debugpath)
if not os.path.exists("/home"):
os.mkdir("/home",0755)
if not os.path.exists("/home/root"):
os.mkdir("/home/root",0755)
def updatedebug_path(configElement):
if not os.path.exists(config.crash.debug_path.value):
try:
os.mkdir(config.crash.debug_path.value,0755)
except:
print "Failed to create log path: %s" % config.crash.debug_path.value
config.crash.debug_path.addNotifier(updatedebug_path, immediate_feedback = False)
crashlogheader = "We are really sorry. Your receiver encountered " \
"a software problem, and needs to be restarted.\n" \
"Please send the logfile %senigma2_crash_xxxxxx.log to http://openspa.info.\n" \
"Your receiver restarts in 10 seconds!\n" \
"Component: enigma2" % config.crash.debug_path.value
config.crash.debug_text = ConfigText(default=_(crashlogheader), fixed_size=False)
config.usage.timerlist_finished_timer_position = ConfigSelection(default = "end", choices = [("beginning", _("At beginning")), ("end", _("At end"))])
def updateEnterForward(configElement):
if not configElement.value:
configElement.value = [2]
updateChoices(config.seek.enter_forward, configElement.value)
config.seek.speeds_forward.addNotifier(updateEnterForward, immediate_feedback = False)
def updateEnterBackward(configElement):
if not configElement.value:
configElement.value = [2]
updateChoices(config.seek.enter_backward, configElement.value)
config.seek.speeds_backward.addNotifier(updateEnterBackward, immediate_feedback = False)
def updateEraseSpeed(el):
eBackgroundFileEraser.getInstance().setEraseSpeed(int(el.value))
def updateEraseFlags(el):
eBackgroundFileEraser.getInstance().setEraseFlags(int(el.value))
config.misc.erase_speed = ConfigSelection(default="20", choices = [
("10", "10 MB/s"),
("20", "20 MB/s"),
("50", "50 MB/s"),
("100", "100 MB/s")])
config.misc.erase_speed.addNotifier(updateEraseSpeed, immediate_feedback = False)
config.misc.erase_flags = ConfigSelection(default="1", choices = [
("0", _("Disable")),
("1", _("Internal hdd only")),
("3", _("Everywhere"))])
config.misc.erase_flags.addNotifier(updateEraseFlags, immediate_feedback = False)
if SystemInfo["ZapMode"]:
def setZapmode(el):
open(SystemInfo["ZapMode"], "w").write(el.value)
config.misc.zapmode = ConfigSelection(default = "mute", choices = [
("mute", _("Black screen")), ("hold", _("Hold screen")), ("mutetilllock", _("Black screen till locked")), ("holdtilllock", _("Hold till locked"))])
config.misc.zapmode.addNotifier(setZapmode, immediate_feedback = False)
if SystemInfo["HasForceLNBOn"]:
def forceLNBPowerChanged(configElement):
open(SystemInfo["HasForceLNBOn"], "w").write(configElement.value)
config.misc.forceLnbPower = ConfigSelection(default = "on", choices = [ ("on", _("Yes")), ("off", _("No"))] )
config.misc.forceLnbPower.addNotifier(forceLNBPowerChanged)
if SystemInfo["HasForceToneburst"]:
def forceToneBurstChanged(configElement):
open(SystemInfo["HasForceToneburst"], "w").write(configElement.value)
config.misc.forceToneBurst = ConfigSelection(default = "enable", choices = [ ("enable", _("Yes")), ("disable", _("No"))] )
config.misc.forceToneBurst.addNotifier(forceToneBurstChanged)
config.subtitles = ConfigSubsection()
config.subtitles.ttx_subtitle_colors = ConfigSelection(default = "1", choices = [
("0", _("original")),
("1", _("white")),
("2", _("yellow")) ])
config.subtitles.ttx_subtitle_original_position = ConfigYesNo(default = False)
config.subtitles.subtitle_position = ConfigSelection( choices = ["0", "10", "20", "30", "40", "50", "60", "70", "80", "90", "100", "150", "200", "250", "300", "350", "400", "450"], default = "50")
config.subtitles.subtitle_alignment = ConfigSelection(choices = [("left", _("left")), ("center", _("center")), ("right", _("right"))], default = "center")
config.subtitles.subtitle_rewrap = ConfigYesNo(default = False)
config.subtitles.colourise_dialogs = ConfigYesNo(default = False)
config.subtitles.subtitle_borderwidth = ConfigSelection(choices = ["1", "2", "3", "4", "5"], default = "3")
config.subtitles.subtitle_fontsize = ConfigSelection(choices = ["%d" % x for x in range(16,101) if not x % 2], default = "40")
config.subtitles.showbackground = ConfigYesNo(default = False)
subtitle_delay_choicelist = []
for i in range(-900000, 1845000, 45000):
if i == 0:
subtitle_delay_choicelist.append(("0", _("No delay")))
else:
subtitle_delay_choicelist.append((str(i), "%2.1f sec" % (i / 90000.)))
config.subtitles.subtitle_noPTSrecordingdelay = ConfigSelection(default = "315000", choices = subtitle_delay_choicelist)
config.subtitles.dvb_subtitles_yellow = ConfigYesNo(default = False)
config.subtitles.dvb_subtitles_original_position = ConfigSelection(default = "0", choices = [("0", _("Original")), ("1", _("Fixed")), ("2", _("Relative"))])
config.subtitles.dvb_subtitles_centered = ConfigYesNo(default = False)
config.subtitles.subtitle_bad_timing_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist)
config.subtitles.dvb_subtitles_backtrans = ConfigSelection(default = "0", choices = [
("0", _("No transparency")),
("25", "10%"),
("50", "20%"),
("75", "30%"),
("100", "40%"),
("125", "50%"),
("150", "60%"),
("175", "70%"),
("200", "80%"),
("225", "90%"),
("255", _("Full transparency"))])
config.subtitles.pango_subtitle_colors = ConfigSelection(default = "1", choices = [
("0", _("alternative")),
("1", _("white")),
("2", _("yellow")) ])
config.subtitles.pango_subtitle_fontswitch = ConfigYesNo(default = True)
config.subtitles.pango_subtitles_delay = ConfigSelection(default = "0", choices = subtitle_delay_choicelist)
config.subtitles.pango_subtitles_fps = ConfigSelection(default = "1", choices = [
("1", _("Original")),
("23976", _("23.976")),
("24000", _("24")),
("25000", _("25")),
("29970", _("29.97")),
("30000", _("30"))])
config.subtitles.pango_autoturnon = ConfigYesNo(default = True)
config.autolanguage = ConfigSubsection()
audio_language_choices=[
("---", _("None")),
("orj dos ory org esl qaa und mis mul ORY ORJ Audio_ORJ", _("Original")),
("ara", _("Arabic")),
("eus baq", _("Basque")),
("bul", _("Bulgarian")),
("hrv", _("Croatian")),
("chn sgp", _("Simplified Chinese")),
("twn hkn", _("Traditional Chinese")),
("ces cze", _("Czech")),
("dan", _("Danish")),
("dut ndl", _("Dutch")),
("eng qaa", _("English")),
("est", _("Estonian")),
("fin", _("Finnish")),
("fra fre", _("French")),
("deu ger", _("German")),
("ell gre", _("Greek")),
("heb", _("Hebrew")),
("hun", _("Hungarian")),
("ita", _("Italian")),
("lav", _("Latvian")),
("lit", _("Lithuanian")),
("ltz", _("Luxembourgish")),
("nor", _("Norwegian")),
("pol", _("Polish")),
("por dub DUB ud1", _("Portuguese")),
("fas per", _("Persian")),
("ron rum", _("Romanian")),
("rus", _("Russian")),
("srp", _("Serbian")),
("slk slo", _("Slovak")),
("slv", _("Slovenian")),
("spa", _("Spanish")),
("swe", _("Swedish")),
("tha", _("Thai")),
("tur Audio_TUR", _("Turkish"))]
def setEpgLanguage(configElement):
eServiceEvent.setEPGLanguage(configElement.value)
config.autolanguage.audio_epglanguage = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---")
config.autolanguage.audio_epglanguage.addNotifier(setEpgLanguage)
def setEpgLanguageAlternative(configElement):
eServiceEvent.setEPGLanguageAlternative(configElement.value)
config.autolanguage.audio_epglanguage_alternative = ConfigSelection(audio_language_choices[:1] + audio_language_choices [2:], default="---")
config.autolanguage.audio_epglanguage_alternative.addNotifier(setEpgLanguageAlternative)
config.autolanguage.audio_autoselect1 = ConfigSelection(choices=audio_language_choices, default="---")
config.autolanguage.audio_autoselect2 = ConfigSelection(choices=audio_language_choices, default="---")
config.autolanguage.audio_autoselect3 = ConfigSelection(choices=audio_language_choices, default="---")
config.autolanguage.audio_autoselect4 = ConfigSelection(choices=audio_language_choices, default="---")
config.autolanguage.audio_defaultac3 = ConfigYesNo(default = False)
config.autolanguage.audio_defaultddp = ConfigYesNo(default = False)
config.autolanguage.audio_usecache = ConfigYesNo(default = True)
subtitle_language_choices = audio_language_choices[:1] + audio_language_choices [2:]
config.autolanguage.subtitle_autoselect1 = ConfigSelection(choices=subtitle_language_choices, default="---")
config.autolanguage.subtitle_autoselect2 = ConfigSelection(choices=subtitle_language_choices, default="---")
config.autolanguage.subtitle_autoselect3 = ConfigSelection(choices=subtitle_language_choices, default="---")
config.autolanguage.subtitle_autoselect4 = ConfigSelection(choices=subtitle_language_choices, default="---")
config.autolanguage.subtitle_hearingimpaired = ConfigYesNo(default = False)
config.autolanguage.subtitle_defaultimpaired = ConfigYesNo(default = False)
config.autolanguage.subtitle_defaultdvb = ConfigYesNo(default = False)
config.autolanguage.subtitle_usecache = ConfigYesNo(default = True)
config.autolanguage.equal_languages = ConfigSelection(default = "15", choices = [
("0", _("None")),("1", "1"),("2", "2"),("3", "1,2"),
("4", "3"),("5", "1,3"),("6", "2,3"),("7", "1,2,3"),
("8", "4"),("9", "1,4"),("10", "2,4"),("11", "1,2,4"),
("12", "3,4"),("13", "1,3,4"),("14", "2,3,4"),("15", _("All"))])
config.streaming = ConfigSubsection()
config.streaming.stream_ecm = ConfigYesNo(default = False)
config.streaming.descramble = ConfigYesNo(default = True)
config.streaming.descramble_client = ConfigYesNo(default = False)
config.streaming.stream_eit = ConfigYesNo(default = True)
config.streaming.stream_ait = ConfigYesNo(default = True)
config.streaming.authentication = ConfigYesNo(default = False)
config.mediaplayer = ConfigSubsection()
config.mediaplayer.useAlternateUserAgent = ConfigYesNo(default=False)
config.mediaplayer.alternateUserAgent = ConfigText(default="")
#config.osd = ConfigSubsection()
config.osd.dst_left = ConfigSelectionNumber(default = 0, stepwidth = 1, min = 0, max = 720, wraparound = False)
config.osd.dst_width = ConfigSelectionNumber(default = 720, stepwidth = 1, min = 0, max = 720, wraparound = False)
config.osd.dst_top = ConfigSelectionNumber(default = 0, stepwidth = 1, min = 0, max = 576, wraparound = False)
config.osd.dst_height = ConfigSelectionNumber(default = 576, stepwidth = 1, min = 0, max = 576, wraparound = False)
config.osd.alpha = ConfigSelectionNumber(default = 255, stepwidth = 1, min = 0, max = 255, wraparound = False)
config.osd.alpha_teletext = ConfigSelectionNumber(default = 255, stepwidth = 1, min = 0, max = 255, wraparound = False)
config.osd.alpha_webbrowser = ConfigSelectionNumber(default = 255, stepwidth = 1, min = 0, max = 255, wraparound = False)
config.av.osd_alpha = NoSave(ConfigNumber(default = 255))
config.osd.threeDmode = ConfigSelection([("off", _("Off")), ("auto", _("Auto")), ("sidebyside", _("Side by Side")),("topandbottom", _("Top and Bottom"))], "auto")
config.osd.threeDznorm = ConfigSlider(default = 50, increment = 1, limits = (0, 100))
config.osd.show3dextensions = ConfigYesNo(default = False)
choiceoptions = [("mode1", _("Mode 1")), ("mode2", _("Mode 2"))]
config.osd.threeDsetmode = ConfigSelection(default = 'mode1' , choices = choiceoptions )
def InitAVSwitch():
if getBoxType() == 'vuduo' or getBoxType().startswith('ixuss'):
config.av.yuvenabled = ConfigBoolean(default=False)
else:
config.av.yuvenabled = ConfigBoolean(default=True)
config.av.osd_alpha = ConfigSlider(
default=255, increment=5, limits=(20, 255)
) # Make openHDF compatible with some plugins who still use config.av.osd_alpha
colorformat_choices = {
"cvbs": _("CVBS"),
"rgb": _("RGB"),
"svideo": _("S-Video")
}
# when YUV is not enabled, don't let the user select it
if config.av.yuvenabled.value:
colorformat_choices["yuv"] = _("YPbPr")
config.av.autores = ConfigSelection(choices={
"disabled": _("Disabled"),
"simple": _("Simple"),
"native": _("Native"),
"all": _("All resolutions"),
"hd": _("only HD")
},
default="disabled")
config.av.autores_preview = NoSave(ConfigYesNo(default=False))
config.av.autores_1080i_deinterlace = ConfigYesNo(default=False)
choicelist = {
"24,24": _("24p/24p"),
"24,25": _("24p/25p"),
"24,30": _("24p/30p"),
"24,50": _("24p/50p"),
"24,60": _("24p/60p"),
"25,24": _("25p/24p"),
"30,24": _("30p/24p"),
"50,24": _("50p/24p"),
"60,24": _("60p/24p"),
"25,25": _("25p/25p"),
"25,30": _("25p/30p"),
"25,50": _("25p/50p"),
"25,60": _("25p/60p"),
"30,25": _("30p/25p"),
"50,25": _("50p/25p"),
"60,25": _("60p/25p"),
"30,30": _("30p/30p"),
"30,50": _("30p/50p"),
"30,60": _("30p/60p"),
"50,30": _("50p/30p"),
"60,30": _("60p/30p"),
"50,50": _("50p/50p"),
"50,60": _("50p/60p"),
"60,50": _("60p/50p"),
"60,60": _("60p/60p")
} # first value <=720p , second value > 720p
config.av.autores_24p = ConfigSelection(choices=choicelist,
default="50,24")
config.av.autores_25p = ConfigSelection(choices=choicelist,
default="50,25")
config.av.autores_30p = ConfigSelection(choices=choicelist,
default="60,30")
config.av.autores_unknownres = ConfigSelection(choices={
"next":
_("next higher Resolution"),
"highest":
_("highest Resolution")
},
default="next")
choicelist = []
for i in range(5, 16):
choicelist.append(
("%d" % i, ngettext("%d second", "%d seconds", i) % i))
config.av.autores_label_timeout = ConfigSelection(
default="5", choices=[("0", _("Not Shown"))] + choicelist)
config.av.autores_delay = ConfigSelectionNumber(min=0,
max=3000,
stepwidth=50,
default=400,
wraparound=True)
config.av.autores_deinterlace = ConfigYesNo(default=False)
config.av.autores_sd = ConfigSelection(choices={
"720p50": _("720p50"),
"720p": _("720p"),
"1080i50": _("1080i50"),
"1080i": _("1080i")
},
default="720p50")
config.av.autores_480p24 = ConfigSelection(choices={
"480p24": _("480p 24Hz"),
"720p24": _("720p 24Hz"),
"1080p24": _("1080p 24Hz")
},
default="1080p24")
config.av.autores_720p24 = ConfigSelection(choices={
"720p24": _("720p 24Hz"),
"1080p24": _("1080p 24Hz"),
"1080i50": _("1080i 50Hz"),
"1080i": _("1080i 60Hz")
},
default="720p24")
config.av.autores_1080p24 = ConfigSelection(choices={
"1080p24": _("1080p 24Hz"),
"1080p25": _("1080p 25Hz"),
"1080i50": _("1080p 50Hz"),
"1080i": _("1080i 60Hz")
},
default="1080p24")
config.av.autores_1080p25 = ConfigSelection(choices={
"1080p25": _("1080p 25Hz"),
"1080p50": _("1080p 50Hz"),
"1080i50": _("1080i 50Hz")
},
default="1080p25")
config.av.autores_1080p30 = ConfigSelection(choices={
"1080p30": _("1080p 30Hz"),
"1080p60": _("1080p 60Hz"),
"1080i": _("1080i 60Hz")
},
default="1080p30")
config.av.smart1080p = ConfigSelection(choices={
"false": _("off"),
"true": _("1080p50: 24p/50p/60p"),
"2160p50": _("2160p50: 24p/50p/60p"),
"1080i50": _("1080i50: 24p/50i/60i"),
"720p50": _("720p50: 24p/50p/60p")
},
default="false")
config.av.colorformat = ConfigSelection(choices=colorformat_choices,
default="rgb")
config.av.aspectratio = ConfigSelection(choices={
"4_3_letterbox":
_("4:3 Letterbox"),
"4_3_panscan":
_("4:3 PanScan"),
"16_9":
_("16:9"),
"16_9_always":
_("16:9 always"),
"16_10_letterbox":
_("16:10 Letterbox"),
"16_10_panscan":
_("16:10 PanScan"),
"16_9_letterbox":
_("16:9 Letterbox")
},
default="16_9")
config.av.aspect = ConfigSelection(choices={
"4:3": _("4:3"),
"16:9": _("16:9"),
"16:10": _("16:10"),
"auto": _("Automatic")
},
default="16:9")
if getBoxType() == 'inihde':
config.av.colorformat = ConfigSelection(choices=colorformat_choices,
default="yuv")
else:
config.av.colorformat = ConfigSelection(choices=colorformat_choices,
default="rgb")
policy2_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term.
"letterbox": _("Letterbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"panscan": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect)
"scale": _("Just scale")
}
if os.path.exists("/proc/stb/video/policy2_choices"):
f = open("/proc/stb/video/policy2_choices")
if "auto" in f.readline():
# TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect.
policy2_choices.update({"auto": _("Auto")})
f.close()
config.av.policy_169 = ConfigSelection(choices=policy2_choices,
default="letterbox")
policy_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term.
"panscan": _("Pillarbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"letterbox": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right)
# "nonlinear": _("Nonlinear"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect)
"bestfit": _("Just scale")
}
if os.path.exists("/proc/stb/video/policy_choices"):
f = open("/proc/stb/video/policy_choices")
if "auto" in f.readline():
# TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect.
policy_choices.update({"auto": _("Auto")})
f.close()
config.av.policy_43 = ConfigSelection(choices=policy_choices,
default="panscan")
config.av.tvsystem = ConfigSelection(choices={
"pal": _("PAL"),
"ntsc": _("NTSC"),
"multinorm": _("multinorm")
},
default="pal")
config.av.wss = ConfigEnableDisable(default=True)
config.av.generalAC3delay = ConfigSelectionNumber(-1000,
1000,
5,
default=0)
config.av.generalPCMdelay = ConfigSelectionNumber(-1000,
1000,
5,
default=0)
config.av.vcrswitch = ConfigEnableDisable(default=False)
#config.av.aspect.setValue('16:9')
config.av.aspect.addNotifier(iAVSwitch.setAspect)
config.av.wss.addNotifier(iAVSwitch.setWss)
config.av.policy_43.addNotifier(iAVSwitch.setPolicy43)
config.av.policy_169.addNotifier(iAVSwitch.setPolicy169)
def setColorFormat(configElement):
if config.av.videoport and config.av.videoport.value in (
"YPbPr", "Scart-YPbPr"):
iAVSwitch.setColorFormat(3)
elif config.av.videoport and config.av.videoport.value in ("RCA"):
iAVSwitch.setColorFormat(0)
else:
if getBoxType() == 'et6x00':
map = {"cvbs": 3, "rgb": 3, "svideo": 2, "yuv": 3}
elif getBoxType() == 'gbquad' or getBoxType(
) == 'gbquadplus' or getBoxType().startswith('et'):
map = {"cvbs": 0, "rgb": 3, "svideo": 2, "yuv": 3}
else:
map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3}
iAVSwitch.setColorFormat(map[configElement.value])
config.av.colorformat.addNotifier(setColorFormat)
def setAspectRatio(configElement):
map = {
"4_3_letterbox": 0,
"4_3_panscan": 1,
"16_9": 2,
"16_9_always": 3,
"16_10_letterbox": 4,
"16_10_panscan": 5,
"16_9_letterbox": 6
}
iAVSwitch.setAspectRatio(map[configElement.value])
iAVSwitch.setInput("ENCODER") # init on startup
if (getBoxType()
in ('gbquad', 'gbquadplus', 'et5x00', 'ixussone', 'ixusszero',
'axodin', 'axodinc', 'starsatlx', 'galaxym6', 'geniuse3hd',
'evoe3hd', 'axase3', 'axase3c', 'omtimussos1', 'omtimussos2',
'gb800seplus', 'gb800ueplus', 'gbultrase', 'gbultraue',
'gbultraueh',
'twinboxlcd')) or about.getModelString() == 'et6000':
detected = False
else:
detected = eAVSwitch.getInstance().haveScartSwitch()
SystemInfo["ScartSwitch"] = detected
if os.path.exists("/proc/stb/hdmi/bypass_edid_checking"):
f = open("/proc/stb/hdmi/bypass_edid_checking", "r")
can_edidchecking = f.read().strip().split(" ")
f.close()
else:
can_edidchecking = False
SystemInfo["Canedidchecking"] = can_edidchecking
if can_edidchecking:
def setEDIDBypass(configElement):
try:
f = open("/proc/stb/hdmi/bypass_edid_checking", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.bypass_edid_checking = ConfigSelection(choices={
"00000000": _("off"),
"00000001": _("on")
},
default="00000001")
config.av.bypass_edid_checking.addNotifier(setEDIDBypass)
else:
config.av.bypass_edid_checking = ConfigNothing()
if os.path.exists("/proc/stb/video/hdmi_colorspace"):
f = open("/proc/stb/video/hdmi_colorspace", "r")
have_colorspace = f.read().strip().split(" ")
f.close()
else:
have_colorspace = False
SystemInfo["havecolorspace"] = have_colorspace
if have_colorspace:
def setHDMIColorspace(configElement):
try:
f = open("/proc/stb/video/hdmi_colorspace", "w")
f.write(configElement.value)
f.close()
except:
pass
if getBoxType() in ('vusolo4k', 'vuuno4k', 'vuultimo4k'):
config.av.hdmicolorspace = ConfigSelection(choices={
"Edid(Auto)": _("Auto"),
"Hdmi_Rgb": _("RGB"),
"444": _("YCbCr444"),
"422": _("YCbCr422"),
"420": _("YCbCr420")
},
default="Edid(Auto)")
elif getBoxType() in ('dm900'):
config.av.hdmicolorspace = ConfigSelection(choices={
"Edid(Auto)":
_("Auto"),
"Hdmi_Rgb":
_("RGB"),
"Itu_R_BT_709":
_("BT709"),
"DVI_Full_Range_RGB":
_("Full Range RGB"),
"FCC":
_("FCC 1953"),
"Itu_R_BT_470_2_BG":
_("BT470 BG"),
"Smpte_170M":
_("Smpte 170M"),
"Smpte_240M":
_("Smpte 240M"),
"Itu_R_BT_2020_NCL":
_("BT2020 NCL"),
"Itu_R_BT_2020_CL":
_("BT2020 CL"),
"XvYCC_709":
_("BT709 XvYCC"),
"XvYCC_601":
_("BT601 XvYCC")
},
default="Edid(Auto)")
else:
config.av.hdmicolorspace = ConfigSelection(choices={
"auto": _("auto"),
"rgb": _("rgb"),
"420": _("420"),
"422": _("422"),
"444": _("444")
},
default="auto")
config.av.hdmicolorspace.addNotifier(setHDMIColorspace)
else:
config.av.hdmicolorspace = ConfigNothing()
if os.path.exists("/proc/stb/video/hdmi_colorimetry"):
f = open("/proc/stb/video/hdmi_colorimetry", "r")
have_colorimetry = f.read().strip().split(" ")
f.close()
else:
have_colorimetry = False
SystemInfo["havecolorimetry"] = have_colorimetry
if have_colorimetry:
def setHDMIColorimetry(configElement):
sleep(0.1)
try:
f = open("/proc/stb/video/hdmi_colorimetry", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.hdmicolorimetry = ConfigSelection(choices={
"auto":
_("auto"),
"bt2020ncl":
_("BT 2020 NCL"),
"bt2020cl":
_("BT 2020 CL"),
"bt709":
_("BT 709")
},
default="auto")
config.av.hdmicolorimetry.addNotifier(setHDMIColorimetry)
else:
config.av.hdmicolorimetry = ConfigNothing()
if os.path.exists("/proc/stb/info/boxmode"):
f = open("/proc/stb/info/boxmode", "r")
have_boxmode = f.read().strip().split(" ")
f.close()
else:
have_boxmode = False
SystemInfo["haveboxmode"] = have_boxmode
if have_boxmode:
def setBoxmode(configElement):
try:
f = open("/proc/stb/info/boxmode", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.boxmode = ConfigSelection(choices={
"12": _("enable PIP no HDR"),
"1": _("12bit 4:2:0/4:2:2 no PIP")
},
default="12")
config.av.boxmode.addNotifier(setBoxmode)
else:
config.av.boxmode = ConfigNothing()
if os.path.exists("/proc/stb/video/hdmi_colordepth"):
f = open("/proc/stb/video/hdmi_colordepth", "r")
have_HdmiColordepth = f.read().strip().split(" ")
f.close()
else:
have_HdmiColordepth = False
SystemInfo["havehdmicolordepth"] = have_HdmiColordepth
if have_HdmiColordepth:
def setHdmiColordepth(configElement):
try:
f = open("/proc/stb/video/hdmi_colordepth", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.hdmicolordepth = ConfigSelection(choices={
"auto": _("Auto"),
"8bit": _("8bit"),
"10bit": _("10bit"),
"12bit": _("12bit")
},
default="auto")
config.av.hdmicolordepth.addNotifier(setHdmiColordepth)
else:
config.av.hdmicolordepth = ConfigNothing()
if os.path.exists("/proc/stb/hdmi/audio_source"):
f = open("/proc/stb/hdmi/audio_source", "r")
can_audiosource = f.read().strip().split(" ")
f.close()
else:
can_audiosource = False
SystemInfo["Canaudiosource"] = can_audiosource
if can_audiosource:
def setAudioSource(configElement):
try:
f = open("/proc/stb/hdmi/audio_source", "w")
f.write(configElement.value)
f.close()
except:
pass
config.av.audio_source = ConfigSelection(choices={
"pcm": _("PCM"),
"spdif": _("SPDIF")
},
default="pcm")
config.av.audio_source.addNotifier(setAudioSource)
else:
config.av.audio_source = ConfigNothing()
if os.path.exists("/proc/stb/audio/3d_surround_choices"):
f = open("/proc/stb/audio/3d_surround_choices", "r")
can_3dsurround = f.read().strip().split(" ")
f.close()
else:
can_3dsurround = False
SystemInfo["Can3DSurround"] = can_3dsurround
if can_3dsurround:
def set3DSurround(configElement):
f = open("/proc/stb/audio/3d_surround", "w")
f.write(configElement.value)
f.close()
choice_list = [("none", _("off")), ("hdmi", _("HDMI")),
("spdif", _("SPDIF")), ("dac", _("DAC"))]
config.av.surround_3d = ConfigSelection(choices=choice_list,
default="none")
config.av.surround_3d.addNotifier(set3DSurround)
else:
config.av.surround_3d = ConfigNothing()
if os.path.exists("/proc/stb/audio/3d_surround_speaker_position_choices"):
f = open("/proc/stb/audio/3d_surround_speaker_position_choices", "r")
can_3dsurround_speaker = f.read().strip().split(" ")
f.close()
else:
can_3dsurround_speaker = False
SystemInfo["Can3DSpeaker"] = can_3dsurround_speaker
if can_3dsurround_speaker:
def set3DSurroundSpeaker(configElement):
f = open("/proc/stb/audio/3d_surround_speaker_position", "w")
f.write(configElement.value)
f.close()
choice_list = [("center", _("center")), ("wide", _("wide")),
("extrawide", _("extra wide"))]
config.av.surround_3d_speaker = ConfigSelection(choices=choice_list,
default="center")
config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker)
else:
config.av.surround_3d_speaker = ConfigNothing()
if os.path.exists("/proc/stb/audio/avl_choices"):
f = open("/proc/stb/audio/avl_choices", "r")
can_autovolume = f.read().strip().split(" ")
f.close()
else:
can_autovolume = False
SystemInfo["CanAutoVolume"] = can_autovolume
if can_autovolume:
def setAutoVolume(configElement):
f = open("/proc/stb/audio/avl", "w")
f.write(configElement.value)
f.close()
choice_list = [("none", _("off")), ("hdmi", _("HDMI")),
("spdif", _("SPDIF")), ("dac", _("DAC"))]
config.av.autovolume = ConfigSelection(choices=choice_list,
default="none")
config.av.autovolume.addNotifier(setAutoVolume)
else:
config.av.autovolume = ConfigNothing()
if SystemInfo["HasMultichannelPCM"]:
def setPCMMultichannel(configElement):
open(SystemInfo["HasMultichannelPCM"],
"w").write(configElement.value and "enable" or "disable")
config.av.pcm_multichannel = ConfigYesNo(default=False)
config.av.pcm_multichannel.addNotifier(setPCMMultichannel)
try:
SystemInfo["CanDownmixAC3"] = "downmix" in open(
"/proc/stb/audio/ac3_choices", "r").read()
except:
SystemInfo["CanDownmixAC3"] = False
if SystemInfo["CanDownmixAC3"]:
def setAC3Downmix(configElement):
open("/proc/stb/audio/ac3",
"w").write(configElement.value and "downmix" or "passthrough")
config.av.downmix_ac3 = ConfigYesNo(default=True)
config.av.downmix_ac3.addNotifier(setAC3Downmix)
if os.path.exists("/proc/stb/audio/ac3plus_choices"):
f = open("/proc/stb/audio/ac3plus_choices", "r")
can_ac3plustranscode = f.read().strip().split(" ")
f.close()
else:
can_ac3plustranscode = False
SystemInfo["CanAC3plusTranscode"] = can_ac3plustranscode
if can_ac3plustranscode:
def setAC3plusTranscode(configElement):
f = open("/proc/stb/audio/ac3plus", "w")
f.write(configElement.value)
f.close()
choice_list = [("use_hdmi_caps", _("controlled by HDMI")),
("force_ac3", _("always"))]
config.av.transcodeac3plus = ConfigSelection(choices=choice_list,
default="use_hdmi_caps")
config.av.transcodeac3plus.addNotifier(setAC3plusTranscode)
try:
f = open("/proc/stb/audio/dtshd_choices", "r")
file = f.read()[:-1]
can_dtshd = f.read().strip().split(" ")
f.close()
except:
can_dtshd = False
SystemInfo["CanDTSHD"] = can_dtshd
if can_dtshd:
def setDTSHD(configElement):
f = open("/proc/stb/audio/dtshd", "w")
f.write(configElement.value)
f.close()
if getBoxType() in ("dm7080", "dm820"):
choice_list = [("use_hdmi_caps", _("controlled by HDMI")),
("force_dts", _("convert to DTS"))]
config.av.dtshd = ConfigSelection(choices=choice_list,
default="use_hdmi_caps")
else:
choice_list = [("downmix", _("Downmix")),
("force_dts", _("convert to DTS")),
("use_hdmi_caps", _("controlled by HDMI")),
("multichannel", _("convert to multi-channel PCM")),
("hdmi_best", _("use best / controlled by HDMI"))]
config.av.dtshd = ConfigSelection(choices=choice_list,
default="hdmi_best")
config.av.dtshd.addNotifier(setDTSHD)
try:
f = open("/proc/stb/audio/wmapro_choices", "r")
file = f.read()[:-1]
can_wmapro = f.read().strip().split(" ")
f.close()
except:
can_wmapro = False
SystemInfo["CanWMAPRO"] = can_wmapro
if can_wmapro:
def setWMAPRO(configElement):
f = open("/proc/stb/audio/wmapro", "w")
f.write(configElement.value)
f.close()
choice_list = [("downmix", _("Downmix")),
("passthrough", _("Passthrough")),
("multichannel", _("convert to multi-channel PCM")),
("hdmi_best", _("use best / controlled by HDMI"))]
config.av.wmapro = ConfigSelection(choices=choice_list,
default="hdmi_best")
config.av.wmapro.addNotifier(setWMAPRO)
try:
f = open("/proc/stb/audio/dts_choices", "r")
file = f.read()[:-1]
f.close()
can_downmix_dts = "downmix" in file
except:
can_downmix_dts = False
SystemInfo["CanDownmixDTS"] = can_downmix_dts
if can_downmix_dts:
def setDTSDownmix(configElement):
f = open("/proc/stb/audio/dts", "w")
f.write(configElement.value and "downmix" or "passthrough")
f.close()
config.av.downmix_dts = ConfigYesNo(default=True)
config.av.downmix_dts.addNotifier(setDTSDownmix)
try:
f = open("/proc/stb/audio/aac_choices", "r")
file = f.read()[:-1]
f.close()
can_downmix_aac = "downmix" in file
except:
can_downmix_aac = False
SystemInfo["CanDownmixAAC"] = can_downmix_aac
if can_downmix_aac:
def setAACDownmix(configElement):
f = open("/proc/stb/audio/aac", "w")
f.write(configElement.value and "downmix" or "passthrough")
f.close()
config.av.downmix_aac = ConfigYesNo(default=True)
config.av.downmix_aac.addNotifier(setAACDownmix)
if os.path.exists("/proc/stb/audio/aac_transcode_choices"):
f = open("/proc/stb/audio/aac_transcode_choices", "r")
can_aactranscode = f.read().strip().split(" ")
f.close()
else:
can_aactranscode = False
SystemInfo["CanAACTranscode"] = can_aactranscode
if can_aactranscode:
def setAACTranscode(configElement):
f = open("/proc/stb/audio/aac_transcode", "w")
f.write(configElement.value)
f.close()
choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))]
config.av.transcodeaac = ConfigSelection(choices=choice_list,
default="off")
config.av.transcodeaac.addNotifier(setAACTranscode)
else:
config.av.transcodeaac = ConfigNothing()
if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"):
def setScaler_sharpness(config):
myval = int(config.value)
try:
print "[VideoMode] setting scaler_sharpness to: %0.8X" % myval
f = open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w")
f.write("%0.8X\n" % myval)
f.close()
f = open("/proc/stb/vmpeg/0/pep_apply", "w")
f.write("1")
f.close()
except IOError:
print "couldn't write pep_scaler_sharpness"
if getBoxType() in ('gbquad', 'gbquadplus'):
config.av.scaler_sharpness = ConfigSlider(default=5,
limits=(0, 26))
else:
config.av.scaler_sharpness = ConfigSlider(default=13,
limits=(0, 26))
config.av.scaler_sharpness.addNotifier(setScaler_sharpness)
else:
config.av.scaler_sharpness = NoSave(ConfigNothing())
config.av.edid_override = ConfigYesNo(default=False)
iAVSwitch.setConfiguredMode()
def InitAVSwitch():
config.av = ConfigSubsection()
config.av.yuvenabled = ConfigBoolean(default=True)
colorformat_choices = {"cvbs": _("CVBS"), "rgb": _("RGB"), "svideo": _("S-Video")}
# when YUV is not enabled, don't let the user select it
if config.av.yuvenabled.value:
colorformat_choices["yuv"] = _("YPbPr")
config.av.colorformat = ConfigSelection(choices=colorformat_choices, default="rgb")
config.av.aspectratio = ConfigSelection(choices={
"4_3_letterbox": _("4:3 Letterbox"),
"4_3_panscan": _("4:3 PanScan"),
"16_9": _("16:9"),
"16_9_always": _("16:9 always"),
"16_10_letterbox": _("16:10 Letterbox"),
"16_10_panscan": _("16:10 PanScan"),
"16_9_letterbox": _("16:9 Letterbox")},
default = "16_9")
config.av.aspect = ConfigSelection(choices={
"4_3": _("4:3"),
"16_9": _("16:9"),
"16_10": _("16:10"),
"auto": _("Automatic")},
default = "auto")
policy2_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term.
"letterbox": _("Letterbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"panscan": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect)
"scale": _("Just scale")}
try:
if "auto" in open("/proc/stb/video/policy2_choices").read():
# TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect.
policy2_choices.update({"auto": _("Auto")})
except:
pass
config.av.policy_169 = ConfigSelection(choices=policy2_choices, default = "letterbox")
policy_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term.
"pillarbox": _("Pillarbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"panscan": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right)
"nonlinear": _("Nonlinear"),
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if this breaks the aspect)
"scale": _("Just scale")}
try:
if "auto" in open("/proc/stb/video/policy_choices").read():
# TRANSLATORS: (aspect ratio policy: always try to display as fullscreen, when there is no content (black bars) on left/right, even if this breaks the aspect.
policy_choices.update({"auto": _("Auto")})
except:
pass
config.av.policy_43 = ConfigSelection(choices=policy_choices, default = "pillarbox")
config.av.tvsystem = ConfigSelection(choices = {"pal": _("PAL"), "ntsc": _("NTSC"), "multinorm": _("multinorm")}, default="pal")
config.av.wss = ConfigEnableDisable(default = True)
config.av.generalAC3delay = ConfigSelectionNumber(-1000, 1000, 5, default = 0)
config.av.generalPCMdelay = ConfigSelectionNumber(-1000, 1000, 5, default = 0)
config.av.vcrswitch = ConfigEnableDisable(default = False)
iAVSwitch = AVSwitch()
def setColorFormat(configElement):
map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3}
iAVSwitch.setColorFormat(map[configElement.value])
def setAspectRatio(configElement):
map = {"4_3_letterbox": 0, "4_3_panscan": 1, "16_9": 2, "16_9_always": 3, "16_10_letterbox": 4, "16_10_panscan": 5, "16_9_letterbox" : 6}
iAVSwitch.setAspectRatio(map[configElement.value])
def setSystem(configElement):
map = {"pal": 0, "ntsc": 1, "multinorm" : 2}
iAVSwitch.setSystem(map[configElement.value])
def setWSS(configElement):
iAVSwitch.setAspectWSS()
# this will call the "setup-val" initial
config.av.colorformat.addNotifier(setColorFormat)
config.av.aspectratio.addNotifier(setAspectRatio)
config.av.tvsystem.addNotifier(setSystem)
config.av.wss.addNotifier(setWSS)
iAVSwitch.setInput("ENCODER") # init on startup
if getBoxType() in ('gbquad4k', 'gbquad', 'gbquadplus', 'gb800seplus', 'gb800ueplus', 'gbipbox', 'gbultra', 'gbultraue', 'gbultraueh', 'gbultrase', 'spycat', 'gbx1', 'gbx2', 'gbx3', 'gbx3h'):
detected = False
else:
detected = eAVSwitch.getInstance().haveScartSwitch()
SystemInfo["ScartSwitch"] = detected
if SystemInfo["HasMultichannelPCM"]:
def setPCMMultichannel(configElement):
open(SystemInfo["HasMultichannelPCM"], "w").write(configElement.value and "enable" or "disable")
config.av.pcm_multichannel = ConfigYesNo(default = False)
config.av.pcm_multichannel.addNotifier(setPCMMultichannel)
try:
SystemInfo["CanDownmixAC3"] = "downmix" in open("/proc/stb/audio/ac3_choices", "r").read()
except:
SystemInfo["CanDownmixAC3"] = False
if SystemInfo["CanDownmixAC3"]:
def setAC3Downmix(configElement):
open("/proc/stb/audio/ac3", "w").write(configElement.value and "downmix" or "passthrough")
config.av.downmix_ac3 = ConfigYesNo(default = True)
config.av.downmix_ac3.addNotifier(setAC3Downmix)
try:
SystemInfo["CanDownmixDTS"] = "downmix" in open("/proc/stb/audio/dts_choices", "r").read()
except:
SystemInfo["CanDownmixDTS"] = False
if SystemInfo["CanDownmixDTS"]:
def setDTSDownmix(configElement):
open("/proc/stb/audio/dts", "w").write(configElement.value and "downmix" or "passthrough")
config.av.downmix_dts = ConfigYesNo(default = True)
config.av.downmix_dts.addNotifier(setDTSDownmix)
try:
SystemInfo["CanDownmixAAC"] = "downmix" in open("/proc/stb/audio/aac_choices", "r").read()
except:
SystemInfo["CanDownmixAAC"] = False
if SystemInfo["CanDownmixAAC"]:
def setAACDownmix(configElement):
open("/proc/stb/audio/aac", "w").write(configElement.value and "downmix" or "passthrough")
config.av.downmix_aac = ConfigYesNo(default = True)
config.av.downmix_aac.addNotifier(setAACDownmix)
if os.path.exists("/proc/stb/audio/aac_transcode_choices"):
f = open("/proc/stb/audio/aac_transcode_choices", "r")
can_aactranscode = f.read().strip().split(" ")
f.close()
else:
can_aactranscode = False
SystemInfo["CanAACTranscode"] = can_aactranscode
if can_aactranscode:
def setAACTranscode(configElement):
f = open("/proc/stb/audio/aac_transcode", "w")
f.write(configElement.value)
f.close()
choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))]
config.av.transcodeaac = ConfigSelection(choices = choice_list, default = "off")
config.av.transcodeaac.addNotifier(setAACTranscode)
else:
config.av.transcodeaac = ConfigNothing()
try:
SystemInfo["CanChangeOsdAlpha"] = open("/proc/stb/video/alpha", "r") and True or False
except:
SystemInfo["CanChangeOsdAlpha"] = False
if SystemInfo["CanChangeOsdAlpha"]:
def setAlpha(config):
open("/proc/stb/video/alpha", "w").write(str(config.value))
config.av.osd_alpha = ConfigSlider(default=255, increment = 5, limits=(20,255))
config.av.osd_alpha.addNotifier(setAlpha)
if os.path.exists("/proc/stb/vmpeg/0/pep_scaler_sharpness"):
def setScaler_sharpness(config):
myval = int(config.value)
try:
print "--> setting scaler_sharpness to: %0.8X" % myval
open("/proc/stb/vmpeg/0/pep_scaler_sharpness", "w").write("%0.8X" % myval)
open("/proc/stb/vmpeg/0/pep_apply", "w").write("1")
except IOError:
print "couldn't write pep_scaler_sharpness"
if getBoxType() in ('gbquad4k', 'gbquad', 'gbquadplus'):
config.av.scaler_sharpness = ConfigSlider(default=5, limits=(0,26))
else:
config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0,26))
config.av.scaler_sharpness.addNotifier(setScaler_sharpness)
else:
config.av.scaler_sharpness = NoSave(ConfigNothing())
config.av.edid_override = ConfigYesNo(default = True)
if SystemInfo["HasMultichannelPCM"]:
def setMultichannelPCM(configElement):
open(SystemInfo["HasMultichannelPCM"], "w").write(configElement.value and "enable" or "disable")
config.av.multichannel_pcm = ConfigYesNo(default = False)
config.av.multichannel_pcm.addNotifier(setMultichannelPCM)
if SystemInfo["HasAutoVolume"]:
def setAutoVolume(configElement):
open(SystemInfo["HasAutoVolume"], "w").write(configElement.value)
config.av.autovolume = ConfigSelection(default = "none", choices = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))])
config.av.autovolume.addNotifier(setAutoVolume)
if SystemInfo["HasAutoVolumeLevel"]:
def setAutoVolumeLevel(configElement):
open(SystemInfo["HasAutoVolumeLevel"], "w").write(configElement.value and "enabled" or "disabled")
config.av.autovolumelevel = ConfigYesNo(default = False)
config.av.autovolumelevel.addNotifier(setAutoVolumeLevel)
if SystemInfo["Has3DSurround"]:
def set3DSurround(configElement):
open(SystemInfo["Has3DSurround"], "w").write(configElement.value)
config.av.surround_3d = ConfigSelection(default = "none", choices = [("none", _("off")), ("hdmi", _("HDMI")), ("spdif", _("SPDIF")), ("dac", _("DAC"))])
config.av.surround_3d.addNotifier(set3DSurround)
if SystemInfo["Has3DSpeaker"]:
def set3DSpeaker(configElement):
open(SystemInfo["Has3DSpeaker"], "w").write(configElement.value)
config.av.speaker_3d = ConfigSelection(default = "center", choices = [("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))])
config.av.speaker_3d.addNotifier(set3DSpeaker)
if SystemInfo["Has3DSurroundSpeaker"]:
def set3DSurroundSpeaker(configElement):
open(SystemInfo["Has3DSurroundSpeaker"], "w").write(configElement.value)
config.av.surround_3d_speaker = ConfigSelection(default = "disabled", choices = [("disabled", _("off")), ("center", _("center")), ("wide", _("wide")), ("extrawide", _("extra wide"))])
config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker)
if SystemInfo["Has3DSurroundSoftLimiter"]:
def set3DSurroundSoftLimiter(configElement):
open(SystemInfo["Has3DSurroundSoftLimiter"], "w").write(configElement.value and "enabled" or "disabled")
config.av.surround_softlimiter_3d = ConfigYesNo(default = False)
config.av.surround_softlimiter_3d.addNotifier(set3DSurroundSoftLimiter)
def InitAVSwitch():
config.av = ConfigSubsection()
config.av.yuvenabled = ConfigBoolean(default=True)
colorformat_choices = {"cvbs": "CVBS"}
# when YUV, Scart or S-Video is not support by HW, don't let the user select it
if SystemInfo["HasYPbPr"]:
colorformat_choices["yuv"] = "YPbPr"
if SystemInfo["HasScart"]:
colorformat_choices["rgb"] = "RGB"
if SystemInfo["HasSVideo"]:
colorformat_choices["svideo"] = "S-Video"
config.av.colorformat = ConfigSelection(choices=colorformat_choices,
default="cvbs")
config.av.aspectratio = ConfigSelection(choices={
"4_3_letterbox":
_("4:3 Letterbox"),
"4_3_panscan":
_("4:3 PanScan"),
"16_9":
"16:9",
"16_9_always":
_("16:9 always"),
"16_10_letterbox":
_("16:10 Letterbox"),
"16_10_panscan":
_("16:10 PanScan"),
"16_9_letterbox":
_("16:9 Letterbox")
},
default="16_9")
config.av.aspect = ConfigSelection(choices={
"4_3": "4:3",
"16_9": "16:9",
"16_10": "16:10",
"auto": _("automatic")
},
default="auto")
policy2_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term.
"letterbox": _("Letterbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"panscan": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible)
"scale": _("Just scale")
}
try:
if "full" in open("/proc/stb/video/policy2_choices").read():
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio)
policy2_choices.update({"full": _("Full screen")})
except:
pass
try:
if "auto" in open("/proc/stb/video/policy2_choices").read():
# TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode)
policy2_choices.update({"auto": _("Auto")})
except:
pass
config.av.policy_169 = ConfigSelection(choices=policy2_choices,
default="letterbox")
policy_choices = {
# TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term.
"pillarbox": _("Pillarbox"),
# TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
"panscan": _("Pan&scan"),
# TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible)
"scale": _("Just scale")
}
try:
if "nonlinear" in open("/proc/stb/video/policy_choices").read():
# TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right)
policy_choices.update({"nonlinear": _("Nonlinear")})
except:
pass
try:
if "full" in open("/proc/stb/video/policy_choices").read():
# TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio)
policy_choices.update({"full": _("Full screen")})
except:
pass
try:
if "auto" in open("/proc/stb/video/policy_choices").read():
# TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode)
policy_choices.update({"auto": _("Auto")})
except:
pass
config.av.policy_43 = ConfigSelection(choices=policy_choices,
default="pillarbox")
config.av.tvsystem = ConfigSelection(choices={
"pal": "PAL",
"ntsc": "NTSC",
"multinorm": "multinorm"
},
default="pal")
config.av.wss = ConfigEnableDisable(default=True)
config.av.generalAC3delay = ConfigSelectionNumber(-1000,
1000,
5,
default=0)
config.av.generalPCMdelay = ConfigSelectionNumber(-1000,
1000,
5,
default=0)
config.av.vcrswitch = ConfigEnableDisable(default=False)
iAVSwitch = AVSwitch()
def setColorFormat(configElement):
map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3}
iAVSwitch.setColorFormat(map[configElement.value])
def setAspectRatio(configElement):
map = {
"4_3_letterbox": 0,
"4_3_panscan": 1,
"16_9": 2,
"16_9_always": 3,
"16_10_letterbox": 4,
"16_10_panscan": 5,
"16_9_letterbox": 6
}
iAVSwitch.setAspectRatio(map[configElement.value])
def setSystem(configElement):
map = {"pal": 0, "ntsc": 1, "multinorm": 2}
iAVSwitch.setSystem(map[configElement.value])
def setWSS(configElement):
iAVSwitch.setAspectWSS()
# this will call the "setup-val" initial
config.av.colorformat.addNotifier(setColorFormat)
config.av.aspectratio.addNotifier(setAspectRatio)
config.av.tvsystem.addNotifier(setSystem)
config.av.wss.addNotifier(setWSS)
iAVSwitch.setInput("ENCODER") # init on startup
SystemInfo["ScartSwitch"] = eAVSwitch.getInstance().haveScartSwitch()
def readChoices(procx, choices, default):
try:
with open(procx, "r") as myfile:
procChoices = myfile.read().strip()
except:
procChoices = ""
if procChoices:
choiceslist = procChoices.split(" ")
choices = [(item, _(item)) for item in choiceslist]
default = choiceslist[0]
return (choices, default)
if SystemInfo["HasMultichannelPCM"]:
def setMultichannelPCM(configElement):
open(SystemInfo["HasMultichannelPCM"],
"w").write(configElement.value and "enable" or "disable")
config.av.multichannel_pcm = ConfigYesNo(default=False)
config.av.multichannel_pcm.addNotifier(setMultichannelPCM)
if SystemInfo["CanDownmixAC3"]:
def setAC3Downmix(configElement):
open("/proc/stb/audio/ac3", "w").write(configElement.value)
choices = [("downmix", _("Downmix")),
("passthrough", _("Passthrough"))]
default = "downmix"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/ac3_choices"
(choices, default) = readChoices(f, choices, default)
config.av.downmix_ac3 = ConfigSelection(choices=choices,
default=default)
config.av.downmix_ac3.addNotifier(setAC3Downmix)
if SystemInfo["CanAC3Transcode"]:
def setAC3plusTranscode(configElement):
open("/proc/stb/audio/ac3plus", "w").write(configElement.value)
choices = [("use_hdmi_caps", _("controlled by HDMI")),
("force_ac3", _("convert to AC3"))]
default = "force_ac3"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/ac3plus_choices"
(choices, default) = readChoices(f, choices, default)
config.av.transcodeac3plus = ConfigSelection(choices=choices,
default=default)
config.av.transcodeac3plus.addNotifier(setAC3plusTranscode)
if SystemInfo["CanDownmixDTS"]:
def setDTSDownmix(configElement):
open("/proc/stb/audio/dts", "w").write(configElement.value)
choices = [("downmix", _("Downmix")),
("passthrough", _("Passthrough"))]
default = "downmix"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/dts_choices"
(choices, default) = readChoices(f, choices, default)
config.av.downmix_dts = ConfigSelection(choices=choices,
default=default)
config.av.downmix_dts.addNotifier(setDTSDownmix)
if SystemInfo["CanDTSHD"]:
def setDTSHD(configElement):
open("/proc/stb/audio/dtshd", "w").write(configElement.value)
choices = [("downmix", _("Downmix")),
("force_dts", _("convert to DTS")),
("use_hdmi_caps", _("controlled by HDMI")),
("multichannel", _("convert to multi-channel PCM")),
("hdmi_best", _("use best / controlled by HDMI"))]
default = "downmix"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/dtshd_choices"
(choices, default) = readChoices(f, choices, default)
config.av.dtshd = ConfigSelection(choices=choices, default=default)
config.av.dtshd.addNotifier(setDTSHD)
if SystemInfo["CanDownmixAAC"]:
def setAACDownmix(configElement):
open("/proc/stb/audio/aac", "w").write(configElement.value)
choices = [("downmix", _("Downmix")),
("passthrough", _("Passthrough"))]
default = "downmix"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/aac_choices"
(choices, default) = readChoices(f, choices, default)
config.av.downmix_aac = ConfigSelection(choices=choices,
default=default)
config.av.downmix_aac.addNotifier(setAACDownmix)
if SystemInfo["CanDownmixAACPlus"]:
def setAACDownmixPlus(configElement):
open("/proc/stb/audio/aacplus", "w").write(configElement.value)
choices = [("downmix", _("Downmix")),
("passthrough", _("Passthrough")),
("multichannel", _("convert to multi-channel PCM")),
("force_ac3", _("convert to AC3")),
("force_dts", _("convert to DTS")),
("use_hdmi_cacenter", _("use_hdmi_cacenter")),
("wide", _("wide")), ("extrawide", _("extrawide"))]
default = "downmix"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/aacplus_choices"
(choices, default) = readChoices(f, choices, default)
config.av.downmix_aacplus = ConfigSelection(choices=choices,
default=default)
config.av.downmix_aacplus.addNotifier(setAACDownmixPlus)
if SystemInfo["CanAACTranscode"]:
def setAACTranscode(configElement):
open("/proc/stb/audio/aac_transcode",
"w").write(configElement.value)
choices = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))]
default = "off"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/aac_transcode_choices"
(choices, default) = readChoices(f, choices, default)
config.av.transcodeaac = ConfigSelection(choices=choices,
default=default)
config.av.transcodeaac.addNotifier(setAACTranscode)
if SystemInfo["CanWMAPRO"]:
def setWMAPRO(configElement):
open("/proc/stb/audio/wmapro", "w").write(configElement.value)
choices = [("downmix", _("Downmix")),
("passthrough", _("Passthrough")),
("multichannel", _("convert to multi-channel PCM")),
("hdmi_best", _("use best / controlled by HDMI"))]
default = "downmix"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/wmapro_choices"
(choices, default) = readChoices(f, choices, default)
config.av.wmapro = ConfigSelection(choices=choices, default=default)
config.av.wmapro.addNotifier(setWMAPRO)
if SystemInfo["CanBTAudio"]:
def setBTAudio(configElement):
open("/proc/stb/audio/btaudio", "w").write(configElement.value)
choices = [("off", _("Off")), ("on", _("On"))]
default = "off"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/btaudio_choices"
(choices, default) = readChoices(f, choices, default)
config.av.btaudio = ConfigSelection(choices=choices, default="off")
config.av.btaudio.addNotifier(setBTAudio)
if SystemInfo["CanBTAudioDelay"]:
def setBTAudioDelay(configElement):
try:
with open(SystemInfo["CanBTAudioDelay"], "w") as fd:
fd.write(format(configElement.value * 90, "x"))
except:
SystemInfo["CanBTAudioDelay"] = False
config.av.btaudiodelay = ConfigSelectionNumber(-1000,
1000,
5,
default=0)
config.av.btaudiodelay.addNotifier(setBTAudioDelay)
try:
SystemInfo["CanChangeOsdAlpha"] = open("/proc/stb/video/alpha",
"r") and True or False
except:
SystemInfo["CanChangeOsdAlpha"] = False
if SystemInfo["CanChangeOsdAlpha"]:
def setAlpha(config):
open("/proc/stb/video/alpha", "w").write(str(config.value))
config.av.osd_alpha = ConfigSlider(default=255, limits=(0, 255))
config.av.osd_alpha.addNotifier(setAlpha)
if SystemInfo["HasScaler_sharpness"]:
def setScaler_sharpness(config):
myval = int(config.value)
try:
print "--> setting scaler_sharpness to: %0.8X" % myval
open("/proc/stb/vmpeg/0/pep_scaler_sharpness",
"w").write("%0.8X" % myval)
open("/proc/stb/vmpeg/0/pep_apply", "w").write("1")
except IOError:
print "couldn't write pep_scaler_sharpness"
config.av.scaler_sharpness = ConfigSlider(default=13, limits=(0, 26))
config.av.scaler_sharpness.addNotifier(setScaler_sharpness)
else:
config.av.scaler_sharpness = NoSave(ConfigNothing())
if SystemInfo["HasAutoVolume"]:
def setAutoVolume(configElement):
open(SystemInfo["HasAutoVolume"], "w").write(configElement.value)
choices = [("none", _("off")), ("hdmi", "HDMI"), ("spdif", "SPDIF"),
("dac", "DAC")]
default = "none"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/avl_choices"
(choices, default) = readChoices(f, choices, default)
config.av.autovolume = ConfigSelection(choices=choices,
default=default)
config.av.autovolume.addNotifier(setAutoVolume)
if SystemInfo["HasAutoVolumeLevel"]:
def setAutoVolumeLevel(configElement):
open(SystemInfo["HasAutoVolumeLevel"],
"w").write(configElement.value and "enabled" or "disabled")
config.av.autovolumelevel = ConfigYesNo(default=False)
config.av.autovolumelevel.addNotifier(setAutoVolumeLevel)
if SystemInfo["Has3DSurround"]:
def set3DSurround(configElement):
open(SystemInfo["Has3DSurround"], "w").write(configElement.value)
choices = [("none", _("off")), ("hdmi", _("HDMI")),
("spdif", _("SPDIF")), ("dac", _("DAC"))]
default = "none"
if SystemInfo["CanProc"]:
f = "/proc/stb/audio/3d_surround_choices"
(choices, default) = readChoices(f, choices, default)
config.av.surround_3d = ConfigSelection(choices=choices,
default=default)
config.av.surround_3d.addNotifier(set3DSurround)
if SystemInfo["Has3DSpeaker"]:
def set3DSpeaker(configElement):
open(SystemInfo["Has3DSpeaker"], "w").write(configElement.value)
config.av.speaker_3d = ConfigSelection(default="center",
choices=[("center",
_("center")),
("wide", _("wide")),
("extrawide",
_("extra wide"))])
config.av.speaker_3d.addNotifier(set3DSpeaker)
if SystemInfo["Has3DSurroundSpeaker"]:
def set3DSurroundSpeaker(configElement):
open(SystemInfo["Has3DSurroundSpeaker"],
"w").write(configElement.value)
config.av.surround_3d_speaker = ConfigSelection(
default="center",
choices=[("center", _("center")), ("wide", _("wide")),
("extrawide", _("extra wide"))])
config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker)
if SystemInfo["Has3DSurroundSoftLimiter"]:
def set3DSurroundSoftLimiter(configElement):
open(SystemInfo["Has3DSurroundSoftLimiter"],
"w").write(configElement.value and "enabled" or "disabled")
config.av.surround_softlimiter_3d = ConfigYesNo(default=False)
config.av.surround_softlimiter_3d.addNotifier(set3DSurroundSoftLimiter)
if SystemInfo["HDMIAudioSource"]:
def setHDMIAudioSource(configElement):
open(SystemInfo["HDMIAudioSource"], "w").write(configElement.value)
config.av.hdmi_audio_source = ConfigSelection(default="pcm",
choices=[("pcm", "PCM"),
("spdif",
"SPDIF")])
config.av.hdmi_audio_source.addNotifier(setHDMIAudioSource)
def setVolumeStepsize(configElement):
eDVBVolumecontrol.getInstance().setVolumeSteps(int(
configElement.value))
config.av.volume_stepsize = ConfigSelectionNumber(1, 10, 1, default=5)
config.av.volume_stepsize.addNotifier(setVolumeStepsize)
if SystemInfo["HasBypassEdidChecking"]:
def setHasBypassEdidChecking(configElement):
open(SystemInfo["HasBypassEdidChecking"],
"w").write("00000001" if configElement.value else "00000000")
config.av.bypassEdidChecking = ConfigYesNo(default=False)
config.av.bypassEdidChecking.addNotifier(setHasBypassEdidChecking)
if SystemInfo["HasColorspace"]:
def setHaveColorspace(configElement):
open(SystemInfo["HasColorspace"], "w").write(configElement.value)
if SystemInfo["HasColorspaceSimple"]:
choices = [("Edid(Auto)", "auto"), ("Hdmi_Rgb", "RGB"),
("444", "YCbCr 4:4:4"), ("422", "YCbCr 4:2:2"),
("420", "YCbCr 4:2:0")]
default = "Edid(Auto)"
else:
choices = [("auto", "auto"), ("rgb", "RGB"), ("420", "4:2:0"),
("422", "4:2:2"), ("444", "4:4:4")]
default = "auto"
if os.path.exists("/proc/stb/video/hdmi_colorspace_choices"
) and SystemInfo["CanProc"]:
f = "/proc/stb/video/hdmi_colorspace_choices"
(choices, default) = readChoices(f, choices, default)
config.av.hdmicolorspace = ConfigSelection(choices=choices,
default=default)
config.av.hdmicolorspace.addNotifier(setHaveColorspace)
if SystemInfo["HasColordepth"]:
def setHaveColordepth(configElement):
open(SystemInfo["HasColordepth"], "w").write(configElement.value)
choices = [("auto", "auto"), ("8bit", "8bit"), ("10bit", "10bit"),
("12bit", "12bit")]
default = "auto"
if os.path.exists("/proc/stb/video/hdmi_colordepth_choices"
) and SystemInfo["CanProc"]:
f = "/proc/stb/video/hdmi_colordepth_choices"
(choices, default) = readChoices(f, choices, default)
config.av.hdmicolordepth = ConfigSelection(choices=choices,
default=default)
config.av.hdmicolordepth.addNotifier(setHaveColordepth)
if SystemInfo["HasHDMIpreemphasis"]:
def setHDMIpreemphasis(configElement):
open(SystemInfo["HasHDMIpreemphasis"],
"w").write("on" if configElement.value else "off")
config.av.hdmipreemphasis = ConfigYesNo(default=False)
config.av.hdmipreemphasis.addNotifier(setHDMIpreemphasis)
if SystemInfo["HasColorimetry"]:
def setColorimetry(configElement):
open(SystemInfo["HasColorimetry"], "w").write(configElement.value)
choices = [("auto", "auto"), ("bt2020ncl", "BT 2020 NCL"),
("bt2020cl", "BT 2020 CL"), ("bt709", "BT 709")]
default = "auto"
if os.path.exists("/proc/stb/video/hdmi_colorimetry_choices"
) and SystemInfo["CanProc"]:
f = "/proc/stb/video/hdmi_colorimetry_choices"
(choices, default) = readChoices(f, choices, default)
config.av.hdmicolorimetry = ConfigSelection(choices=choices,
default=default)
config.av.hdmicolorimetry.addNotifier(setColorimetry)
if SystemInfo["HasHdrType"]:
def setHdmiHdrType(configElement):
open(SystemInfo["HasHdrType"], "w").write(configElement.value)
config.av.hdmihdrtype = ConfigSelection(default="auto",
choices={
"auto": _("auto"),
"none": "SDR",
"hdr10": "HDR10",
"hlg": "HLG",
"dolby": "Dolby Vision"
})
config.av.hdmihdrtype.addNotifier(setHdmiHdrType)
if SystemInfo["HDRSupport"]:
def setHlgSupport(configElement):
open("/proc/stb/hdmi/hlg_support", "w").write(configElement.value)
config.av.hlg_support = ConfigSelection(
default="auto(EDID)",
choices=[("auto(EDID)", _("controlled by HDMI")),
("yes", _("force enabled")), ("no", _("force disabled"))])
config.av.hlg_support.addNotifier(setHlgSupport)
def setHdr10Support(configElement):
open("/proc/stb/hdmi/hdr10_support",
"w").write(configElement.value)
config.av.hdr10_support = ConfigSelection(
default="auto(EDID)",
choices=[("auto(EDID)", _("controlled by HDMI")),
("yes", _("force enabled")), ("no", _("force disabled"))])
config.av.hdr10_support.addNotifier(setHdr10Support)
def setDisable12Bit(configElement):
open("/proc/stb/video/disable_12bit",
"w").write("1" if configElement.value else "0")
config.av.allow_12bit = ConfigYesNo(default=False)
config.av.allow_12bit.addNotifier(setDisable12Bit)
def setDisable10Bit(configElement):
open("/proc/stb/video/disable_10bit",
"w").write("1" if configElement.value else "0")
config.av.allow_10bit = ConfigYesNo(default=False)
config.av.allow_10bit.addNotifier(setDisable10Bit)
